Search Results

Search found 89335 results on 3574 pages for 'server restart'.

Page 481/3574 | < Previous Page | 477 478 479 480 481 482 483 484 485 486 487 488  | Next Page >

• Printer deployment via Group Policy not working on a single system

  - by Aron Rotteveel

  One of my coworkers just got a new laptop running Windows 7 Pro x64. We use a GPO to deploy the printers to every system, but for some reason it is not working on this system. I have been breaking my head over this for the past 3 hours now without any result. The strange thing is that gpresult /H seems to indicate that the GPO did run. The hardware: Laptop: Windows 7 Professional x64 Print server: Windows Server 2008 x64 R1 HP Color LaserJet 2605dn HP LaserJet P2015 Driver packages on server: HP universal printer driver PCL5, both X86 as X64 Oddities and other info: GPO working flawlessly on every other system, including my own Windows 7 Ultimate X64 laptop gpresult /H shows the GPO being ran Windows Firewall completely disabled on the new laptop Below is the output for gpresult /H (in Dutch sadly, but I think you'll recognize it): Beleidsregels Windows-instellingen Printerverbindingen Pad Dominerend groepsbeleidsobject \\Server2008\HP Color LaserJet 2605dn Printers \\Server2008\HP LaserJet P2015 Printers Beheersjablonen Beleidsdefinities (ADMX-bestanden) opgehaald van de lokale computer. Configuratiescherm/Printers Beleid Instelling Dominerend groepsbeleidsobject Beperkingen van point-and-print Uitgeschakeld Printers Like I said, I have been trying to figure this out for the past few hours or so without any result, so you are my last hope. Any help is appreciated.

  Read the article

• WHS - Windows Update Failure

  - by Kyle B.

  Clicking "Update Now..." inside my EX470 control panel for Windows Update produces the following error message: "Windows Home Server updates installation can not complete. Please try again later. If the problem persists, please restart the server." I have rebooted the server numerous times, and I have also used remote desktop to connect to the machine to perform the update this way, however the browser is unable to pull up http://windowsupdate.microsoft.com. This is very strange behavior because I am able to access all other sites (gmail.com, serverfault.com, etc). Would it be possible for someone to explain to me how I can check to see what is blocking the connection of this device, which apparently has a valid internet connection, to the Microsoft Windows Update site? note #1 Using the shortcut: %SystemRoot%\system32\wupdmgr.exe does not work either. It says "Connecting to 65.55.200.155..." but nothing ever happens. This is strange because all other sites seem fine. Also, I can connect to windowsupdate.microsoft.com on my local desktop so I know this is running as well

  Read the article

• Installation requirements of django installing in hostgator dedicated server

  - by jaypabs

  First, before I install OSQA on my dedicated server at hostgator, I want to know the requirements. I don't want to screw up my server so it's better to ask question first. I have read a lot of tutorial on the internet regarding Django but I want to clarify something before I proceed. On my dedicated server I don't use FCGI. Instead I use Mod SuPHP. A lot of tutorial is talking about installing python using FCGI. My question is if it is safe to install Python if I'm using SuPHP? Is it safe to use the tutorial on this link: http://wiki.osqa.net/display/docs/Installing+OSQA+on+CentOS6?focusedCommentId=4784144 Thanks in advance for your help.

  Read the article

• Event Log: atapi - the device did not respond within the timeout period - Freeze

  - by rjlopes

  Hi, I have a Windows Server 2003 that stops working randomly (displays image on monitor but is completely frozen), all I could found on the event log as causes were an error from atapi and a warning from msas2k3. The event log entries are: Event Type: Error Event Source: atapi Event Category: None Event ID: 9 Date: 22-07-2009 Time: 16:13:33 User: N/A Computer: SERVER Description: The device, \Device\Ide\IdePort0, did not respond within the timeout period. For more information, see Help and Support Center at http : // go.microsoft.com / fwlink / events.asp. Data: 0000: 0f 00 10 00 01 00 64 00 ......d. 0008: 00 00 00 00 09 00 04 c0 .......À 0010: 01 01 00 50 00 00 00 00 ...P.... 0018: f8 06 20 00 00 00 00 00 ø. ..... 0020: 00 00 00 00 00 00 00 00 ........ 0028: 00 00 00 00 01 00 00 00 ........ 0030: 00 00 00 00 07 00 00 00 ........ Event Type: Warning Event Source: msas2k3 Event Category: None Event ID: 129 Date: 22-07-2009 Time: 16:14:23 User: N/A Computer: SERVER Description: Reset to device, \Device\RaidPort0, was issued. For more information, see Help and Support Center at http : // go.microsoft.com / fwlink / events.asp. Data: 0000: 0f 00 10 00 01 00 68 00 ......h. 0008: 00 00 00 00 81 00 04 80 ......? 0010: 04 00 00 00 00 00 00 00 ........ 0018: 00 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ 0028: 00 00 00 00 00 00 00 00 ........ 0030: 01 00 00 00 81 00 04 80 ......? Any hints?

  Read the article

• Assigning static IP and domain name mapping to local server in LAN

  - by yashbinani

  I have developed a web application which will be deployed in a LAN environemnt. Clients will be Computers/Android Tablets/IPAD In order for communication between client and local server 1) need to assign a static IP to local server. 2) need a domian name mapping for that IP address in Local environment. 3) router should assign the same static IP if it gets restarted etc. I am using a windows XP machine as Local server OS. Do i need to take care of router configurations before buying one, or all routers will have same capability to perform this task. I am not a network specialist, so Sorry if this question sounds stupid. Thanks

  Read the article

• Identify Web Server from HTML File System

  - by bumble_bee_tuna

  Hi I've been given the following html file system with no knowledge of where it came from. To me this appears to be from a web server. I've been hitting Google on "Sam" smsLtd can't find to much, is this "SAM" a propitiatory web server ? Can I throw this up on an Apache or IIS server ? Reason I ask is there are some xml data files that seem to assign permissions and logins. Figured I'd ask as I have never seen it before.

  Read the article

• Suggest methods for testing changes to "pam.d/common-*" files

  - by Jamie

  How do I test the changes to the pam.d configuration files: Do I need to restart the PAM service to test the changes? Should I go through every service listed in the /etc/pam.d/ directory? I'm about to make changes to the pam.d/common-* files in an effort to put an Ubuntu box into an active directory controlled network. I'm just learning what to do, so I'm preparing the configuration in a VM, which I plan to deploy in metal in the coming week. It is a clean install of Ubuntu 10.04 Beta 2 server, so other than SSH daemon, all other services are stock.

  Read the article

• Custom dedicated email server combined with Amazon AWS?

  - by Simon

  Hi there. We are considering moving our servers to Amazone EC2 cloud. The only thing that stops right now is their problems with ip ranges banned from spam mail lists like SORBS. We are considering leaving one dedicated server in our current hosting, the one which we use to send mail (and other several features we will move to EC2), in order to be able to send the mails from this smtp server instead from Amazon. So, the idea is to have our sites hosted in EC2, and when they need to send mail, redirect they to our "local" smtp server. Do you think it´s viable? Can you think on a better solution? Thanks in advance, Simon.

  Read the article

• Create new partition on live production CentOS server

  - by Kimmel

  I have a production server that is running on CentOS. I'd like to create a partition on the server without having to reinstall everything. I have CLI and VNC access to the remote server. Is there anyway that I can create a partition safely? Here's my output from fdisk -l Disk /dev/sda: 85.9 GB, 85899345920 bytes 255 heads, 63 sectors/track, 10443 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00033d5e Device Boot Start End Blocks Id System /dev/sda1 * 1 10444 83885056 83 Linux Thanks.

  Read the article

• Content server backups

  - by Dan Sosedoff

  What is the best way to backup data on content servers? For example, I have 15 servers that just have content, no applications running on it. Each server has a 250 GB hard drive. So, it's a pretty big amount of data. All the data have external access (via HTTP). So, the question is: what methodology is best in my case? The most useful method I know is cross-backup: when each server contains its own data and backup of one other server. But, there is significant reduction in total capacity. RAID?

  Read the article

• Linux / apache web-server segmentation fault warnings

  - by jeroen

  Lately I have been receiving a lot of segmentation fault warnings on my web-server. The warnings look like: [notice] child pid xxxx exit signal Segmentation fault (11) I have consulted with the server provider (it is a dedicated redhat enterprise server) and they could not find anything. What I have done so far: Since the error I have already tried the following: I have added more ram I have turned off / turned on several php modules (they sent me to a web-page someone had the same problem, caused by an excessive amount of php modules) At the moments the warnings occur, there seems to be plenty of free ram left and the number of processes is very low (the number of httpd processes is about a quarter of the maximum allowed). What can be causing these errors? Edit: current versions apache: 2.0.52 php: 5.2.8 RHEL 4 Edit 2: Although I asked this a long time ago, I never was able to solve it until I upgraded to php 5.3.

  Read the article

• Upgrading from SQL2000 database to SQL Express 2008 R2

  - by itwb

  Hi, We have a web application which uses a MSSQL 2000 backend database. We are currently paying a ridiculous amount for Shared Hosting, with the database costs alone costing us $150 per month (MSSQL 100mb extra space is $40 per month). Our database size is 896.38 MB I am looking at getting a Virtual Private Server and upgrading the database to a MSSQL2008 Express database. I am aware that the Express version is limited to a 10GB database (with R2), and is constrained to a single CPU. I have also been offered SQL Server 2008 Web Edition for $19/per month, but I cannot find many details on the difference between Express and Web. Any suggestions here? What I would also like to know is: If we upgrade the database to MSSQL 2008 database, is there any issues with possible data transformations in the future? I.e. Is it possible to download and mount it with SQL Server 2008 Standard edition? I'm more concerned about how to get data in and out of the database through SQL Management tools. Are there any other issues that I might face? Thanks, Mike

  Read the article

• Convert raw IMAP server data into local folders, then upload partial dataset to new IMAP server?

  - by Manca Weeks

  I am transitioning a company with about 30 IMAP accounts, loaded with data (about 77GB total), to a new email host. The majority of the data will be converted into a local archive and distributed to the company computers as a static reference data set. The server side folders the users absolutely cannot do without being on the server will be uploaded back to the new server. I used Mac OS X Mail (Snow Leopard 10.6.6) to download the content. I notice some messages have the name [xxx].partial.emlx, which leads me to believe they have not been downloaded all the way. I have root access to the mail server data and could download the IMAP server data via FTP. I am not sure what utility to use to convert that data to local Mail.app mailboxes. Furthermore, I would appreciate any input on the best way to upload a portion of the data to the new server (GoDaddy), preserving the original dates of the messages. edit OK - forget the raw server data. I found a script that apparently does pretty good archiving IMAP folders to local mbx files. My main quest now is to batch upload a mailbox hierarchy to the new IMAP server without having to start-stop and deal with similar issues. Anyone know of a utility (hopefully for OS X, but if not, I'll fire up my XP virtual system...) that would be capable of this? Thanks, M

  Read the article

• Cannot ping my domain-joined server - Can only ping domain controller - host unreachable

  - by Vazgen

  I have a HyperV Server hosting a Domain Controller VM (192.168.1.50) and another VM (192.168.1.51) joined to this domain. I have: domain controller as DNS server forward lookup zone for the domain with host record for 192.168.1.50 and 192.168.1.51 Windows client has primary DNS server set to 192.168.1.50 and secondary to my ISP I can ping 192.168.1.50 (domain controller) successfully but cannot ping 192.168.1.51 (domain-joined VM) When pinging from Windows client: ping 192.168.1.51 Reply from 192.168.1.129 : Destination host unreachable When pinging from Domain Controller: ping 192.168.1.51 Reply from 192.168.1.50 : Destination host unreachable I have 2 virtual network adapters one PRIVATE for intranet (set to static IP 192.168.1.51) and one PUBLIC for internet with a dynamic IP. I noticed the the PUBLIC one inherited the "mydomain.com" domain subtitle after joining the domain... I don't know what this meant but it seemed more intuitive to me to switch THIS ONE to have the static IP. After I configured that I still could not ping but now I get: ping 192.168.1.51 Request timed out What seems to be the issue, I'm relatively new to networking.

  Read the article

• looking for a clean way of how to bring down a ftp server for maintenance

  - by harald

  hello, i'm currently thinking of a clean way of how to bring an ftp server down for maintenance. i wonder, if anybody out there could give me some hints of how to solve this: i don't want to interrupt any current uploads, but want to block any new connects / uploads and wait, till uploads have finished, before taking down the ftp server is there a way of dynamically prevent user-logins and show a message eg.: "ftp currently down for maintenance" when a user tries to log in? are my thoughts on this very uncommon or how do others handle this -- i feel, that just halting ftp server and killing any current uploads is not the right way for this ... i use proftpd (with SQL backend) btw, maybe there are some specific solutions for this -- or are there any generic tools to achieve this? many thanks!

  Read the article

• Postfix SMTP server down on Ubuntu

  - by Paddington

  I have a Plesk server running Postfix on Ubuntu 10.04 and the SMTP service on port 25 is down. When I stop and then start postfix the server comes up only for a minute and goes down again. I have checked the load on the server and it is low as shown: *top - 04:29:33 up 19 days, 3:25, 4 users, load average: 1.47, 1.78, 2.34 Tasks: 936 total, 1 running, 935 sleeping, 0 stopped, 0 zombie Cpu(s): 0.7%us, 0.3%sy, 0.0%ni, 86.6%id, 11.7%wa, 0.6%hi, 0.1%si, 0.0%st Mem: 6110496k total, 6072988k used, 37508k free, 251244k buffers Swap: 12000544k total, 95264k used, 11905280k free, 4370432k cached* IMAP clients are not experiencing a problem and there are no issues with receiving emails for both POP or IMAP. Only SMTP (port 25) is a problem. If I ask clients to use the submission port (587) messages are delivered. netstat -lnt shows the following results , so its not a port issue. tcp 0 0 0.0.0.0:25 0.0.0.0: LISTEN tcp 0 0 0.0.0.0:8443 0.0.0.0:* LISTEN*

  Read the article

• What is this in error_log ? Invalid method in request \x16\x03\x01

  - by valter

  Hello. I found this line Invalid method in request \x16\x03\x01 on error_log file , and some other similiar lines like: [Wed Oct 27 23:16:37 2010] [error] [client 187.117.240.164] Invalid URI in request x\xb2\xa1:SMl\xcc{\xfd"\xd1\x91\x84!d\x0e~\xf6:\xfbVu\xdf\xc3\xdb[\xa9\xfe\xd3lpz\x92\xbf\x9f5\xa3\xbbvF\xbc\xee\x1a\xb1\xb0\xf8K\xecE\xbc\xe8r\xacx=\xc7>\xb5\xbd\xa3\xda\xe9\xf09\x95"fd\x1c\x05\x1c\xd5\xf3#:\x91\xe6WE\xdb\xadN;k14;\xdcr\xad\x9e\xa8\xde\x95\xc3\xebw\xa0\xb1N\x8c~\xf1\xcfSY\xd5zX\xd7\x0f\vH\xe4\xb5(\xcf,3\xc98\x19\xefYq@\xd2I\x96\xfb\xc7\xa9\xae._{S\xd1\x9c\xad\x17\xdci\x9b\xca\x93\xafSM\xb8\x99\xd9|\xc2\xd8\xc9\xe7\xe9O\x99\xad\x19\xc3V]\xcc\xddR\xf7$\xaa\xb8\x18\xe0f\xb8\xff Apache did a graceful restart a few seconds after the first error...

  Read the article

• Setting "Register this connection's addresses in DNS" using GPO

  - by ChamaraG

  Hi All, I need to get the Windows XP client machines in my network to dynamically update their DNS A records. The network is an AD domain running on Windows Server 2003 R2 servers with Win XP SP3 clients. Some machines already have the "Register this connection's addresses in DNS" check box checked and sucessfully update the DNS server. But some machines do not have this check box set and I need to set this. I read that this is possible using a GPO and I enabled the following: Computer configuration - Administrative templates - Network - DNS client Primary DNS Suffix Dynamic Update DNS Servers Connection-Specific DNS Suffix Register DNS records with connection-specific DNS suffix and where required, entered the relevant parameters. Running rsop.msc in the client machines shows that the GPO has been applied. The client machines have been rebooted. The DNS server allows "Nonsecure and secure" dynamic updates and is only accessible from our internal network. But, the "Register this connection's addresses in DNS" check box is not set. And the hosts without this set are not updating their DNS A records. Per another suggestion in a web site, i tried running "ipconfig /registerdns", but it does not add the DNS A record. Any advice on what I am doing wrong here would be gratefully accepted :-) Thank you.

  Read the article

• File Sharing: User-created folders are read-only to others on Mac 10.6 Server

  - by Anriëtte Combrink

  Hi there We recently got a new Mac Mini Server with 10.6 Server on it. It has two 500GB volumes, one of which [Macintosh HD2 the extra one other than the boot disk] we are using to share our work files. I have added a user account for each user in the Users pane on Server Preferences, and all our staff (users added to the system) are added to a new group, called toolboxstaff. Now, when a user creates a new folder on this volume, folders are created with read-only access for everyone else besides the owner. How do I set it that when a user creates a folder, it creates it with RW access for the toolboxstaff group? Thanks in advance.

  Read the article

• PHP + MYSQL site perfomance

  - by Diego

  I have to manage a site which wasn't developed by me. It is in PHP using a mysql database, which is located in the web server. The site, sometimes (when the visitors increase too much) stops responding, or respond too slow. I have developed some sites in PHP but never took care of the management so really don't know where to start. The server (the hard) seems to be fine, when the web stops responding the cpu is being used at about 55% and has a lot of memory. I'm not asking someone to solve this issue. I only would really like if someone could give me a few tips about where can I find logs and how should I read and interpret them. So, that way I would be able to know if its the net traffic, the database (which queries), or what. Thanks! Update: Forgot to say: it is a Windows Server 2003. Note: I've recorded about a day with Jet Profiler. I don't really understand all the information it provides but there is one query which it marks as really slow. It makes sense because it is a select with a where clause which has three like condition. Initially I didn't include this in my question because when I run the query from MySQL Query Browser it doesn't take any long. It is under 0.01 seconds.

  Read the article

• Linux Port 80 to redirect to a Windows box

  - by Richard Staehler

  I have 2 servers here at work. One is a Windows 2008 Server R2 (for safety's sake, lets use 192.168.1.100) and the other is a Fedora 14 (192.168.1.101). Currently when you hit our subdomain, x.test.com, our routers tell it to go to our Fedora box, and since Apache is installed and listening to port 80, it displays the Fedora Apache Test Page. It's obvious that I don't use port 80 for this machine, however I do use NAGIOS on it and its always nice to be able to access that from anywhere in the world. So when I want to access it, I just type x.test.com/nagios. Now here comes the dilemma.... On the Windows R2 box, we recently have installed a program that requires us to setup a web server using IIS7. Because of this application, I'm going to be creating a new subdomain called y.test.com, but since we only have 1 WAN/router, it will still get pointed to our Fedora box. That being said, it wants to use port 80 as well (or whatever port I damn well wish to assign it). So my question is: since our router is pointing to the Fedora 14 box (.101), and I want to make sure I can access NAGIOS from anywhere in the world, how do I tell Apache (httpd) to redirect port 80 to the other server (.100)? If not possible, what are my other options? I have rinetd installed on Fedora and have even tried the option 192.168.1.101 80 192.168.1.100 80 and it didn't seem to work "because port 80 was already bound" Thoughts? and Thanks!

  Read the article

• Most secure way of connecting an intranet to an external server

  - by Eitan

  I have an internal server that hosts an asp.net intranet application. I want to keep it completely and utterly secure and private however we need to expose some information through a WCF service to another server which hosts our external websites which CAN be accessed by the public. What is the best way to pass information between the two servers with regards to an IT setup, while keeping the intranet in house server completely secure and inaccessible? I've heard VPN was the way to go but I wanted to be sure this was the safest way. Another question what would be the most secure way of passing data in the WCF service?

  Read the article

• XP IIS no longer listen to port 80 or 443 after installing Oracle 9i HTTP Server

  - by Nassign

  I have installed Oracle 9i HTTP Server together with the database. After restarting the PC, even though i restarted the IIS and stopped the Oracle HTTP Server. When I go to http://localhost/ The starting page is already the Oracle HTTP Server index page. Also when I look at the port that inetinfo.exe is listening to, it no longer listens to port 80 and the SSL port 443, even if i restart the IIS and World Wide Web Publishing service. Any idea what setting did oracle changed when I installed oracle 9i? The executable associated with the OracleOraHome90HTTPServer is C:\oracle\ora90\Apache\Apache\Apache.exe I already checked the tasklist and Apache is really not running. But there is no process listening to port 80 still even if the IIS restarts successfully. Any ideas how to fix this?

  Read the article

• btrfs: can i create a btrfs file system with data as jbod and metadata mirrored

  - by Yogi

  I am trying to build a home server that will be my NAS/Media server as well a the XBMC front end. I am planning on using Ubuntu with btrfs for the NAS part of it. The current setup consists of 1TB hdd for the OS etc and two 2TB hdd's for data. I plan to have the 2TB hdd's used as JBOD btrfs system in which i can add hdd's as needed later, basically growing the filesystem online. They way I had setup the file system for testing was while installing the OS just have one of the HDD's connected and have btrfs on it mounted as /data. Later on add another hdd to this file system. When the second disk was added btrfs made as RAID 0, with metadata being RAID 1. However, this presents a problem: even if one of the disk fails I loose all my data (mostly media). Also most of the time the server will be running without doing any disk access, i.e. the HDD's can be spun down, when a access request comes in this with the current RAID 0 setup both disks will spin up. in case I manage a JBOD only the disk that has the file needs to be spun up. This should hopefully reduce the MTBF for each disk. So, is there a way in which I can have btrfs setup such that metadata is mirrored but data stays in a JBOD formation? Another question I have is this, I understand that a full drive failure in JBOD will lose data on the drive, but having metadeta mirrored across all drives, will this help the filesytem correct errors that migh creep in (ex bit rot?) and is btrfs capable of doing this.

  Read the article

• Make server unavailable gracefully using Powershell in ARR

  - by Carl Bergquist

  We are using ARR as reverse proxy and I would like to make a server unavailable for various reasons. How can this be done using Powershell? Edit 1: I found this http://blogs.iis.net/anilr/archive/2009/11/09/using-arr-config-extensibility-to-gracefully-stop-server.aspx tutorial for using JScript. But I'm not able to translate it to powershell. Edit 2: Using the Set-WebConfigurationProperty in WebAdministration module I'm able to changes settings for a server. I found SetState in %windir%\system32\inetsrv\config\schema\arr_schema.xml but I don't know how to invoke that method.

  Read the article

< Previous Page | 477 478 479 480 481 482 483 484 485 486 487 488  | Next Page >