Search Results

Search found 31219 results on 1249 pages for 'ubuntu games'.

Page 481/1249 | < Previous Page | 477 478 479 480 481 482 483 484 485 486 487 488  | Next Page >

• How do I teach bash in Ubuntu some curse words?

  - by NitinAb

  When bash encounters an unknown command(word?) it does this : The program 'hello' can be found in the following packages: * hello * hello-debhelper Try: sudo apt-get install <selected package> what I would like to know is how this is done so I can edit it or add something before it to cross check the unknown word from a home grown dictionary which would have phrase:reply pairs that can then be sent to output. I am guilty of not looking enough for it around .. but the few bash guides I tried digging up didn't have anything on this. Maybe I am looking at the wrong places .. any pointers? And yes I am doing this so every time I type wtf when a program fails , I want something nice thrown back at me...

  Read the article

• Graphic Card Installation Failure (NV 9600M GT)

  - by Georg

  I wanted to switch from 7 to Ubuntu. Now, the first thing that holds me back is the installation of the driver for my Nvidia 9600M GT. Ubuntu recommends me 4 drivers from the "Additional Driver" Section. Now, whatever driver I install, there are four things happening RANDOMLY after rebooting: The pc freezes before seeing bootup splash The pc freezes while seeing bootup splash image (ubuntu logo with the 5 dots) The pc gets into login screen and freezes instantly (Thought the unity-bar is transparent now) The pc freezes right after beeing able to login. (While this is happening the unity-bar changes from transparent to ugly-flat-style) I also tried to install the official Nvidia .run file but after exiting the X-Server, it says the driver is not compatible with the kernel and exits installation. Can somebody help me? I really wanna get rid of Windows :( But Ubuntu drives me perfectly insane. Please answer as noobish as possible. I'm an expert Windows user, but Linux is absolutely new to me. My Specs: Ubuntu 11.10 installed from USB Stick (like 100 times now :/ because I dont know how to remove the driver in recovery mode) 9600M GT 4GB Ram Intel Centrino 2 Dual Core 2.26GHz Win 7 and Ubuntu running along side. Thank you in advance, regards.

  Read the article

• How do i tell ubuntu to only install is asked for and do not bring other dependencies which will break the whole system?

  - by YumYumYum

  How can i only install python-webkit but not other packages? which is showing to install? (no gstreamer*.*, i do not want to have any single files installed in my distro because of GPL license and it slows my machine a lot) $ sudo apt-get install libwebkitgtk-1.0-0 python-webkit Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libgstreamer-plugins-base0.10-0 libgstreamer0.10-0 Suggested packages: gstreamer-codec-install gnome-codec-install gstreamer0.10-tools gstreamer0.10-plugins-base The following NEW packages will be installed: libgstreamer-plugins-base0.10-0 libgstreamer0.10-0 libwebkitgtk-1.0-0 0 upgraded, 3 newly installed, 0 to remove and 333 not upgraded. Need to get 8,231 kB of archives. After this operation, 28.2 MB of additional disk space will be used. Do you want to continue [Y/n]? n Abort.

  Read the article

• How to get Visual Studio 2012 working on Ubuntu 12.04.1?

  - by kamil

  I am trying to get visual studio working in Unity (via Wine) without using any virtual machine or other Desktop Environment alternatives. I am convinced Visual Studio is the ultimate IDE for .Net programming languages. I'm not necessarily for dual booting. I have been working more than 10 years on visual studio and I prefer it over other IDEs. I have tried other IDEs but they didn't work too well for me. Does anyone know a way to get this working natively?

  Read the article

• capture login screen-not sucssecful

  - by yinon

  I'm using Ubuntu 12.04 . If more information is needed, please tell me. I Tried some guides to cature my login screen: How can I take a screenshot of the login screen? http://www.howtoforge.com/how-to-take-a-screenshot-of-your-login-screen I tried the first one, but after running: $ sudo bash /tmp/shot.sh >/tmp/shot.xwd I'm getting this: No protocol specified No protocol specified xwd unable to open display ':0' and i'm getting an xwd file in my tmp folder. running the other commands giving errors. tried the second one, after running: chvt 8; sleep 5; XAUTHORITY=/var/gdm/:0.Xauth DISPLAY=:0.0 import -window root /tmp/gdm-login-shot.png I got: No protocol specified No protocol specified import: unable to open X server ':0.0' @ error/import.c/ImportImageCommand/366 Many Thanks for helping (: EDIT to vine_user: here the output from the terminal-I cacked it from within the system while I'm looged in: ubuntu@PrecisePangolin:~$ echo 'sleep 5; DISPLAY=:0 XAUTHORITY=/var/run/lightdm/root/$DISPLAYDISPLAY xwd -root' > /tmp/shot.sh ubuntu@PrecisePangolin:~$ sudo bash /tmp/shot.sh >/tmp/shot.xwd bash: /tmp/shot.xwd: Permission denied ubuntu@PrecisePangolin:~$ sudo su root@PrecisePangolin:/home/ubuntu# sudo bash /tmp/shot.sh >/tmp/shot.xwd No protocol specified No protocol specified xwd: unable to open display ':0' root@PrecisePangolin:/home/ubuntu# EDIT 2!: HERE IT IS!: just uploading-this uploadong site is better than other iuset to use (: :

  Read the article

• Bluetooth adapter turned from working fine to unrecognized

  - by easoncxz

  i had been using bluetooth fine, with devices working, but today when i turned on my computer again bluetooth strangely failed. there is a bluetooth icon on the top bar, showing "bluetooth on", but if i click on the "bluetooth settings" item, a system settings window shows up and shows me a bluetooth on-off switch which is disabled (i.e. fixed to off). more information about my case: i am a new linux used, coming from windows, and do not know supposedly-obvious commands. i am using a laptop. it initially doesn't have bluetooth. i bought a built-in type (instead of USB type) bluetooth module, and added it inside the laptop. hence, i do not have a specific FN+* key for bluetooth. in windows, i needed to install an additional driver that was intended for other machines in my laptop's seires which have built-in (i.e. factoryly built-in)j bluetooth modules. the Fn+* key seemed to only affect wifi under ubuntu. i have been successfully using magicmouse with my later-added built-in bluetooth module/adapter on both windows and ubuntu i have been trying to tweak the magicmouse scrolling speed with commands rmmod something, modprobe hid_magicmouse --scroll_speed=45 --scroll_acceleration=30 or something, then added a file `/etc/modprobe.d/magicmouse.conf". the mouse seemed to be working fine with these changes. now if i run commands like hcitool dev, the shell tells me that i do not have any "Devices" or "adapters". i seem to have bluez installed, because when i type "blue" then tab-autocomplete, a bunch of commands like bluez-test-device pops up. -- update -- some commands and their results: easoncxz@eason-Aspire-4741-ubuntu:/etc$ hcitool dev Devices: easoncxz@eason-Aspire-4741-ubuntu:/etc$ hcitool scan Device is not available: No such device easoncxz@eason-Aspire-4741-ubuntu:/etc$ rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no 2: acer-bluetooth: Bluetooth Soft blocked: no Hard blocked: no easoncxz@eason-Aspire-4741-ubuntu:/etc$ rfkill list 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 1: acer-wireless: Wireless LAN Soft blocked: yes Hard blocked: no 2: acer-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no

  Read the article

• Cannot log in to the desktop on ubuntu 11.10?

  - by Jichao

  The problem is, I could log in under the terminal, i could ifup eth0, i could do anything I want in the terminal, but if I use ctrl+alt+f7 goto the gnome login screen, after I input the correct password, the system just send me back to same login screen again. I have created a new user, but it didn't work. I have change all the files under ~/ to jichao:jichao(which is my username) with chown -hR jichao:jichao /home/jichao, but it didn't work too. I searched the internet, somebody said I should see the logs under /var/log/gdm, but there is not a /var/log/gdm directory in my box. Here are the tail of files under /var/log/ tail X.org.log [ 3263.348] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 3263.348] (**) Dell Dell USB Keyboard: always reports core events [ 3263.348] (**) Dell Dell USB Keyboard: Device: "/dev/input/event5" [ 3263.348] (--) Dell Dell USB Keyboard: Found keys [ 3263.348] (II) Dell Dell USB Keyboard: Configuring as keyboard [ 3263.348] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29/event5" [ 3263.348] (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD) [ 3263.348] (**) Option "xkb_rules" "evdev" [ 3263.348] (**) Option "xkb_model" "pc105" [ 3263.348] (**) Option "xkb_layout" "us" kern.log Mar 20 09:32:58 jichao-MS-730 kernel: [ 3182.701247] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input27 Mar 20 09:32:58 jichao-MS-730 kernel: [ 3182.701392] generic-usb 0003:413C:2003.0018: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.642572] usb 2-1.3: new low speed USB device number 17 using ehci_hcd Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.741892] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input28 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.742080] generic-usb 0003:045E:0047.0019: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.3/input0 Mar 20 09:33:27 jichao-MS-730 kernel: [ 3212.473901] usb 2-1.3: USB disconnect, device number 17 Mar 20 09:33:28 jichao-MS-730 kernel: [ 3212.702031] usb 2-1.4: USB disconnect, device number 16 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.022655] usb 2-1.4: new low speed USB device number 18 using ehci_hcd Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124278] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124423] generic-usb 0003:413C:2003.001A: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.741892] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input28 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.742080] generic-usb 0003:045E:0047.0019: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.3/input0 syslog Mar 20 09:33:02 jichao-MS-730 mtp-probe: bus: 2, device: 17 was not an MTP device Mar 20 09:33:27 jichao-MS-730 kernel: [ 3212.473901] usb 2-1.3: USB disconnect, device number 17 Mar 20 09:33:28 jichao-MS-730 kernel: [ 3212.702031] usb 2-1.4: USB disconnect, device number 16 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.022655] usb 2-1.4: new low speed USB device number 18 using ehci_hcd Mar 20 09:34:08 jichao-MS-730 mtp-probe: checking bus 2, device 18: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4" Mar 20 09:34:08 jichao-MS-730 mtp-probe: bus: 2, device: 18 was not an MTP device Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124278] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124423] generic-usb 0003:413C:2003.001A: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 auth.log Mar 20 09:18:52 jichao-MS-730 lightdm: pam_ck_connector(lightdm-autologin:session): nox11 mode, ignoring PAM_TTY :0 Mar 20 09:18:53 jichao-MS-730 lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "jichao" Mar 20 09:18:53 jichao-MS-730 dbus[835]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.240" (uid=104 pid=6457 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.11" (uid=0 pid=1156 comm="/usr/sbin/console-kit-daemon --no-daemon ") Mar 20 09:19:38 jichao-MS-730 sudo: jichao : TTY=tty6 ; PWD=/home ; USER=root ; COMMAND=/bin/chown -hR jichao:jichao jicha Mar 20 09:19:39 jichao-MS-730 sudo: jichao : TTY=tty6 ; PWD=/home ; USER=root ; COMMAND=/bin/chown -hR jichao:jichao jichao Mar 20 09:20:10 jichao-MS-730 lightdm: pam_unix(lightdm-autologin:session): session closed for user lightdm Mar 20 09:20:11 jichao-MS-730 lightdm: pam_unix(lightdm-autologin:session): session opened for user lightdm by (uid=0) Mar 20 09:20:11 jichao-MS-730 lightdm: pam_ck_connector(lightdm-autologin:session): nox11 mode, ignoring PAM_TTY :0 Mar 20 09:20:12 jichao-MS-730 lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "jichao" Mar 20 09:20:12 jichao-MS-730 dbus[835]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.247" (uid=104 pid=6572 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.11" (uid=0 pid=1156 comm="/usr/sbin/console-kit-daemon --no-daemon ") It seems that my .xsession-errors does not grow since yesterday. Here is my .xsession-error: (gnome-settings-daemon:1550): Gdk-WARNING **: The program 'gnome-settings-daemon' received an X Window System error. This probably reflects a bug in the program. The error was 'BadWindow (invalid Window parameter)'. (Details: serial 26702 error_code 3 request_code 2 minor_code 0) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed WARN 2012-03-17 19:28:46 glib <unknown>:0 Unable to fetch children: Method "Children" with signature "" on interface "org.ayatana.bamf.view" doesn't exist WARN 2012-03-17 19:28:46 glib <unknown>:0 Unable to fetch children: Method "Children" with signature "" on interface "org.ayatana.bamf.view" doesn't exist (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, /usr/share/system-config-printer/applet.py:336: GtkWarning: ??????????????:“pixmap”, self.loop.run () (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, common-plugin-Message: checking whether we have a device for 4: yes common-plugin-Message: checking whether we have a device for 5: yes common-plugin-Message: checking whether we have a device for 6: yes common-plugin-Message: checking whether we have a device for 7: yes common-plugin-Message: checking whether we have a device for 10: yes common-plugin-Message: checking whether we have a device for 8: yes common-plugin-Message: checking whether we have a device for 9: yes (gnome-settings-daemon:13791): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed [1331983727,000,xklavier.c:xkl_engine_start_listen/] The backend does not require manual layout management - but it is provided by the application ** (gnome-fallback-mount-helper:1584): DEBUG: ConsoleKit session is active 0 (gnome-fallback-mount-helper:1584): Gdk-WARNING **: gnome-fallback-mount-helper: Fatal IO error 11 (???????) on X server :0. (gdu-notification-daemon:1708): Gdk-WARNING **: gdu-notification-daemon: Fatal IO error 11 (???????) on X server :0. unity-window-decorator: Fatal IO error 11 (???????) on X server :0.0. (bluetooth-applet:1583): Gdk-WARNING **: bluetooth-applet: Fatal IO error 11 (???????) on X server :0. (nm-applet:1596): Gdk-WARNING **: nm-applet: Fatal IO error 11 (???????) on X server :0. (nautilus:3106): IBUS-WARNING **: _connection_closed_cb: Underlying GIOStream returned 0 bytes on an async read (update-notifier:1821): Gdk-WARNING **: update-notifier: Fatal IO error 11 (???????) on X server :0. applet.py: Fatal IO error 11 (???????) on X server :0. (nautilus:3106): Gdk-WARNING **: nautilus: Fatal IO error 11 (???????) on X server :0. Could you help me, Thanks.

  Read the article

• Can I install Visual Studio 2012 without a virtual machine in Ubuntu?

  - by kamil

  I am trying to get visual studio working in Unity without using any virtual machine or other IDE alternatives. I am convinced Visual Studio is the ultimate IDE for .Net programming languages. I'm not necessarily for dual booting. I have been working more than 10 years on visual studio and I prefer it over other IDEs. I have tried other IDEs but they didin't work too well for me. Does anyone know a way to get this working natively?

  Read the article

• I cannot solve the "Install these packages without verification" problem

  - by Yonatan Orlev

  I Googled and Googled and I just cannot find a solution to this problem: sudo apt-get install <whatever> Gives me: WARNING: The following packages cannot be authenticated! and Install these packages without verification [y/N]? I cannot find a decent solution. The closest I got was to run: sudo apt-get install debian-keyring debian-archive-keyring But then, even thought, and against my good judgment I agreed to install the package without confirmation, I get: (I replaced http with XXXX because of forum limitations). Install these packages without verification [y/N]? y Err XXXX://il.archive.ubuntu.com gutsy/universe debian-archive-keyring 2007.02.19-0.1 404 Not Found Err XXXX://il.archive.ubuntu.com gutsy/universe debian-keyring 2005.05.28 404 Not Found Failed to fetch XXXX://il.archive.ubuntu.com/ubuntu/pool/universe/d/debian-archive-keyring/debian-archive-keyring_2007.02.19-0.1_all.deb 404 Not Found Failed to fetch XXXX://il.archive.ubuntu.com/ubuntu/pool/universe/d/debian-keyring/debian-keyring_2005.05.28_all.deb 404 Not Found E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? Trying to run apt-get update also does not help: I get tons of "404 Not Found" errors. Can someone please direct me to a good solution to this problem? I cannot understand why this issue is not better documented. There must be a simple solution which allows me to update my list of sources or whatever.

  Read the article

• Unable to mount smb share. "Please select another viewer and try again". Please help. Serious smb/nautilus foo needed

  - by oznah

  This don't think this is the typical, "I can't mount a windows share" post. I am using stock Ubuntu 12.04. I am pretty sure this is a Nautilus issue, but I have reached a dead end. I have one share that I can't mount using smb://server/share via nautilus. I get the following error. Error: Failed to mount Windows share Please select another viewer and try again I can mount this share from other machines(non-ubuntu) using the same credentials so I know I have perms on the destination share. I can mount other shares on other servers from my Ubuntu box so I am pretty sure I have all the smb packages I need on my Ubuntu box. To make thing more interesting, if I use smbclient from the command line, I mount this share with no problems from my Ubuntu box. So here's what we know: destination share perms are ok (no problem accessing from other machines) smb is setup correctly on Ubuntu box (access other windows shares no problem) I only get the error when using nautilus smbclient in terminal works, no problem Any help would be greatly appreciated. Googling turned up simple mount/perms issues, and I don't think that is what is going on here. Let me know if you need more information. Hugh

  Read the article

• How to solve 404 for static files with Django and Nginx?

  - by Lucio

  I setup a Trusty VM with Django + Nginx (other stuffs too). The server is working, I get the "Welcome to Django" page. But when I enter to servername/admin it loads the HTML page but fails to load the static content. And the admin page have this links to static content: <link rel="stylesheet" type="text/css" href="/static/admin/css/base.css" /> <link rel="stylesheet" type="text/css" href="/static/admin/css/login.css" /> Both of the CSS files give me 404, as the Nginx log shows: 192.168.56.1 - - [05/Jun/2014:12:04:09 -0300] "GET /admin HTTP/1.1" 301 5 "-" "Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:29.0) Gecko/20100101 Firefox/29.0" 192.168.56.1 - - [05/Jun/2014:12:04:09 -0300] "GET /admin/ HTTP/1.1" 200 833 "-" "Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:29.0) Gecko/20100101 Firefox/29.0" 192.168.56.1 - - [05/Jun/2014:12:04:10 -0300] "GET /static/admin/css/base.css HTTP/1.1" 404 142 "http://ubuntu-server/admin/" "Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:29.0) Gecko/20100101 Firefox/29.0" 192.168.56.1 - - [05/Jun/2014:12:04:10 -0300] "GET /static/admin/css/login.css HTTP/1.1" 404 142 "http://ubuntu-server/admin/" "Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:29.0) Gecko/20100101 Firefox/29.0" I think that the error is on my nginx.conf file, but do not know how to solve it.

  Read the article

• Unknown filesystem error

  - by Ben

  My computer has (had) a dual boot of Ubuntu Precise and Windows 7. Recently, when I started the computer, grub gave me an error saying "Unknown filesystem", and sent me to grub rescue. I searched for solutions to this, and found this answer: Unknown filesystem error: grub rescue. I followed the instructions there, but they didn't really help: when I restarted the computer, it went straight to Windows without grub intervening at all (so it boots successfully, just not to the OS I want). This is the log from boot-repair. My Ubuntu partition is sda6. Naturally, I'm a little worried, since the log says "unknown filesystem type ''", which to me looks like the partition might be corrupt somehow. From the Ubuntu Live CD, I started gparted and looked at my partitions, and it also told me that my sda6 is an unknown filesystem. So my questions are basically: Can I restore Ubuntu to the way it was? If not, can I at least rescue the data I had on the partition somehow? Again, if I can't restore Ubuntu, how do I clean everything up so that I can reinstall it without too many complications? Another thing I should mention is that yesterday I had a similar problem where the computer told me there was a problem with the hard drive when it was starting, but it fixed itself by running fsck (that time it got past grub, and managed to start Ubuntu). Between that occasion and me having trouble booting the computer today, I have booted it successfully at least twice. Thanks for any help!

  Read the article

• Is it relatively safe to install kernel from "Canonical Kernel Team ppa" than "Mainline"

  - by tijybba

  I already referred most of the questions stating Upgrade from Mainline Builds or Compiling from latest source or PPA and also concluded that it can cause breakage to Current stable installed system. My question is regarding the kernel builds from Canonical Kernel Team which i have subscribed in Ubuntu 12.04 64-bit , states This is the core kernel team as hired by Canonical. Do not use this team, use ubuntu-kernel-team instead. My stable kernel states 3.2.0-27.42 from Ubuntu repository , also i consider Canonical Kernel Team to be Official ,currently urging me to Upgrade 3.2.0-27.43 , so from the Odd numbered and through the PPA description it is categorized as Unstable. From this ,it can be said next stable release would be 3.2.0-27.44. Is upgrading to .43 version is stable enough to continue , since .44 will be provide by Ubuntu itself based on .43 version and so on. Though i can't expect a lot of Changes ,but does it provide new Improvements or just Bug Fixes since it is just a preceding Release. Also , apart from Ubuntu mainline kernel , is Canonical Kernel Team different. If so , in what development or contribution terms. Is the Ubuntu kernel developed by Two different teams or same team. P.S.: Just noticed that sudo apt-get update && sudo apt-get upgrade provides me upgrade to .43 kernel , which normally requires sudo apt-get dist-upgrade to upgrade to newer kernel available , unless it normally provides message like " Following packages were not upgraded..." , is it an error or an exception to this Canonical Kernel PPA.

  Read the article

• What is the best way to restrict access to adult content on Ubuntu?

  - by Stephen Myall

  I bought my kids a PC and installed 12.04 (Unity) on it. The bottom line is, I want my children to use the computer unsupervised while I have confidence they cannot access anything inappropriate. What I have looked at: I was looking at Scrubit a tool which allows me configure my wifi router to block content and this solution would also protect my other PC and mobile devices. This may be overkill as I just want the solution to work on one PC. I also did some Google searches and came across the application called Nanny (it seems to look the part). My experience of OSS is that the best solutions frequently never appear first on a Google search list and in this case I need to trust the methods therefore my question is very specific. I want to leverage your knowledge and experience to understand “What is the best way to restrict adult content on 12.04 LTS” as this is important to me. It maybe a combination of things so please don't answer this question "try this or that", then give me some PPA unless you can share your experience of how good it is and of course if there are any contraints. Thanks in advance

  Read the article

• How to install Diablo 2 Lord of Destrucion on Ubuntu 12.04?

  - by user99666

  I tried to install Diablo 2 LOD from my iso image first with acetone iso and I coldn't the acetone iso mounted me the image but when I tried to install it said please install the labelled disc so I give up for a while ... Then I tried with Gmount and on some forums it was told me to create mount points and the install it ... said and done the problem is that it mounts me the image it starts to install but only the first 3 disc images the expansion no ,so I said whatever it's ok even without the expansion but when i tried to play it says me insert the labelled disc but the iso image was still mounted with Gmount .Now somebody can help me please to resolve this problems ?

  Read the article

• What is the correct way to restart udev in Ubuntu?

  - by zerkms

  I've changed the name of my eth1 interface to eth0. How to ask udev now to re-read the config? service udev restart and udevadm control --reload-rules don't help. So is there any valid way except of rebooting? (yes, reboot helps with this issue) UPD: yes, I know I should prepend the commands with sudo, but either one I posted above changes nothing in ifconfig -a output: I still see eth1, not eth0. UPD 2: I just changed the NAME property of udev-rule line. Don't know any reason for this to be ineffective. There is no any error in executing of both commands I've posted above, but they just don't change actual interface name in ifconfig -a output. If I perform reboot - then interface name changes as expected. UPD 3: let I explain all the case better ;-) For development purposes I write some script that clones virtual machines (VirtualBox-driven) and pre-sets them up in some way. So I perform a command to clone VM, start it and as long as network interface MAC is changed - udev adds the second rule to network persistent rules. Right after machine is booted for the first time there are 2 rules: eth0, which does not exist, as long as it existed in the original VM image MAC eth1, which exists, but all the configuration in all files refers to eth0, so it is not that good for me So I with sed delete the line with eth0 (it is obsolete and useless in cloned image) and replace eth1 with eth0. So currently I have valid persistent rule, but there is still eth1 in /dev. The issue: I don't want to reboot the machine (it will take another time, which is not good thing on building-VM-stage) and just want to have my /dev rebuilt with some command so I have ready-to-use VM without any reboots.

  Read the article

• can connect to wifi router but not the internet 12.10

  - by harsh

  I believe i have tried every trick in the book ! I am able to access my router from my ubuntu desktop but not even a single site on the internet. i have installed the drivers for my pci wifi card following this procedure : http://steveswinsburg.wordpress.com/2011/03/12/how-to-install-a-d-link-dwa-525-wireless-network-card-in-ubuntu-10-04/ Earlier it didn't connect to the internet and kept prompting me for the password. after i installed the driver it got connected ! but now i cant access the internet and can only access my router. i deleted the resolv.conf file. I have also tried the "rkill" command and it shows it is unlocked. I have even tried pinging the ip's 8.8.8.8 & 8.8.4.4 and i get replies from both. I have also added them on my wifi configuration setup on ubuntu desktop. I am new to ubuntu but learning fast :-) These are the things i don't like about ubuntu, the simple tasks are difficult for a person coming from windows. I am using ubuntu 12.10. please reply at the earliest i would be very thankful.

  Read the article

• Why ubuntu does not use the kernels installed by automatic update?

  - by Guillaume Coté

  I used the script describe in this question to list the kernel installed on the computer : How do I to remove or hide old kernel versions, to clean up the boot menu? In the 3.2.0, I have 33, 34, 35, 36, 37, 38, 39, 41, 43, 44, 45 and 48. I would expect to be running 3.2.0-48 after a reboot, but I am still running 3.2.0-32. Why the kernels installed by auto update are not used? [I am running 12.04 LTS] /boot/grub/menu.lst was modified for the last time June 16 2013, it contains 3.2.0-32-generic 2.6.32-45-generic 2.6.32-44-generic 2.6.32-43-generic A recovery for each of those and a memtest. I would have expected the kernel between 3.2.0-33 to 3.2.0-48 to be in this file before 3.2.0-32.

  Read the article

• How can I make the Ubuntu Software Center load?

  - by Kieran

  I launch it and it goes grey for almost immediately. Closing it prompts me to "force close" and no error report is given. I launched it in Terminal and this was the resulting log: 2012-11-23 22:39:25,175 - softwarecenter.ui.gtk3.app - INFO - setting up proxy 'None' 2012-11-23 22:39:25,179 - softwarecenter.db.database - INFO - open() database: path=None use_axi=True use_agent=True 2012-11-23 22:39:25,409 - softwarecenter.backend.reviews - WARNING - Could not get usefulness from server, no username in config file 2012-11-23 22:39:25,412 - softwarecenter.fixme - WARNING - logs to the root logger: '('/usr/lib/python2.7/dist-packages/gi/importer.py', 51, 'find_module')' 2012-11-23 22:39:25,412 - root - ERROR - Could not find any typelib for LaunchpadIntegration 2012-11-23 22:39:25,474 - softwarecenter.ui.gtk3.app - INFO - show_available_packages: search_text is '', app is None

  Read the article

• How can I record an OpenGL game in Ubuntu?

  - by fish

  I would like to create a short clip of me playing Minecraft, an OpenGL game. The usual screencast recorders do not properly record OpenGL. What kind of software is available for this purpose? My experience with the software in the similar (but no longer duplicate) question: kazam: very low framerate despite setting to 60 FPS, no sound, unity menubar constantly flashing through the fullscreen window. RecordMyDesktop: max framerate setting is 50 FPS, but the video becomes extremely fast if not using the default 15 FPS. xvidcap: not available on 12.04 tibesti: not available on 12.04 wink: does not run ffmpeg: very low quality video and no sound with the recommended settings, might be tunable though (no gui unfortunately). kdenlive: uses recordmydesktop, and the recorded clip becomes corrupted aconv: video sped up, often broken image, no sound

  Read the article

• Technically speaking, what is different about Ubuntu compared to other Linux distributions?

  - by Ross

  This is a question that's puzzled me for quite a while (and refers to the differences between all distributions). In my mind, a distribution is: a pre-configured OS, with some pre-installed packages, some created by the distribution's community that are unique to that distribution (e.g. apt-get). I'm not sure my definition is right as I feel there's something else. I'm really interested in setting up my own ArchLinux distro (which starts as a very minimal barebones system that you expand yourself) but feel I need to understand this first.

  Read the article

• how to remove unmet dependencies created by vlc player in ubuntu 12.04 LTS?

  - by Anti

  Output on trying to remove vlc with sudo apt-get remove vlc: niranjan@niranjan-OEM:~$ sudo apt-get remove vlc Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: libvlccore5 : Depends: vlc-data (= 2.0.8-0ubuntu0.12.04.1) but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). Trying sudo apt-get -f install niranjan@niranjan-OEM:~$ sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: vlc-data The following NEW packages will be installed: vlc-data 0 upgraded, 1 newly installed, 0 to remove and 452 not upgraded. 8 not fully installed or removed. Need to get 0 B/10.3 MB of archives. After this operation, 30.4 MB of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 95% dpkg: unrecoverable fatal error, aborting: files list file for package 'libavutil51' is missing final newline E: Sub-process /usr/bin/dpkg returned an error code (2)

  Read the article

• forcing upgrade or how to upgrade packages after update failed

  - by Orosjopie

  How do I continue upgrade or fix upgrade as upgrading in 13.04 to 13.10 failed. I'm currently running terminal in restore mode. I get the error unmet dependencies, but tried to install apt-get -f install, but get this error: unable to fetch some archives. using apt-get update also brings errors for example: failed to fetch http: archive.canonical.com/ubuntu/dists/quantal/release.gpg Could not resolve 'archive.canonical.com. Is it my internet connection? Its currently connected via a network cable and internet is on other computers. If internet on my ubuntu 13.10, how do I switch it on? or how can fix my upgrade problem that I can boot ubuntu normal, backup, then format and reload ubuntu 13.10 properly? I posted this problem that has also linked to this problem I mentioned: upgrading to ubuntu 13.10 failed/crashed. I did manager to install/upgrade some of the files and got ubuntu 13.10 to reboot, but not 100%, as it is slow and the unity desktop is not showing 100%. in trying some of the commands online, I get the error that the activity manager is not installed, when trying to install it, it conflicts with activity-log-manager-common. Please assist.

  Read the article

• My Ubuntu LiveUSB won't boot after formatting it on Windows XP. HELP!

  - by Bigyellow Bastion

  I formatted because the Windows XP I was using wouldn't let me view the drive in the window without formatting first, so I just said what the heck. Turns out, after using the Linux USB creator, placing the ISO on disc properly and booting, BIOS hangs; no bootloader, no startup, nothing. Windows XP's formatting screwed something up with my USB's filesystem, and I'm uncertain of what to do. Help?! My business depends on me using an OS, so prompt ideas are a must and very appreciated(no money). PS: I checked the contents of the disc, and they are all okay.

  Read the article

• Installer gets stuck with a grayed out forward button.

  - by TRiG

  I have a CD with Ubuntu 10.10 and a laptop with Ubuntu 8.10. The laptop had all sorts of crud on it, and anything I wanted to keep was backed up on an external drive, so I was happy to do a wipe and reinstall instead of an update. So after a bit of faffing about trying to work out how to get the thing to boot from the CD drive, I did that. So the screen comes up with the choice: the options are Try Ubuntu and Install Ubuntu. I choose to install and to overwrite my current installation. So far so good. I then get a progress bar labelled something like copying files (I forget the exact wording) and further options to fill in for my location, keyboard locale, username and password. On each of these screens there are forward and back buttons. On the last screen (password), the forward button is greyed out. Well, I think to myself, no doubt it will become active when that copying files progress bar completes. The progress bar never completes. It hangs. And the label changes from copying files to the chirpy ready when you are. The forward button remains greyed out. The back button is as unhelpful as you'd expect it to be. And there's nothing else to click. We have reached an impasse. I tried restarting the laptop, to test whether it actually was properly installed. It wasn't. I tried to run Ubuntu live from the CD, to test whether the disk was damaged. That wouldn't work either, but I suspect it's just because the laptop is old and has a slow disk drive. I'm typing this question on another computer using the Ubuntu live CD and it's working fine. So there's nothing wrong with the CD.

  Read the article

< Previous Page | 477 478 479 480 481 482 483 484 485 486 487 488  | Next Page >