Search Results

Search found 44910 results on 1797 pages for 'breadth first traversal'.

Page 483/1797 | < Previous Page | 479 480 481 482 483 484 485 486 487 488 489 490  | Next Page >

  • Reset MAAS after loosing Juju configuration?

    - by Azendale
    I managed to delete my Juju client cofiguration without running a juju destroy-environment first, leaving my MaaS in a state where I could not deploy to it. I would get the following (conflicting) output $ juju bootstrap ERROR environment is already bootstrapped $ juju status ERROR Unable to connect to environment "". Please check your credentials or use 'juju bootstrap' to create a new environment. Error details: no instances found So, I tried running juju destroy-environment with the new config, to see if it would clean up the old Juju environment on the MaaS system. It gave me the error "ERROR gomaasapi: got error back from server: 409 CONFLICT". I went into the MaaS GUI and stopped the leftover machines, and then deleted all the nodes and had then go through the discovery and commissioning stages again, but I still got the same errors after all that! Is there a way to reset this?

    Read the article

  • Working with Legacy code

    - by andrewstopford
    I'm going to start a series on working with legacy code based on some of things I have learnt over the years. First I define my terms for 'legacy', I define legacy as (as someone on twitter called it) not brownfield but blackfield. Brownfield can be code you did yesterday, last week or last month etc. Blackfield tends to be a great older (think years old) and worked on by a great deal many people. Sure brownfield can also be legacy code but often has far less smells and technical debt, due to it's age the problems are often far worse and far harder to treat.  I'm not sure how many posts I'll write for the series or how long it will run for but I'll add them as and when they occur to me. Finally if you are working with the kind of codebase I describe then Michael Feathers 'Working with Legacy code' is a great resource.

    Read the article

  • Getting the innermost .NET Exception

    - by Rick Strahl
    Here's a trivial but quite useful function that I frequently need in dynamic execution of code: Finding the innermost exception when an exception occurs, because for many operations (for example Reflection invocations or Web Service calls) the top level errors returned can be rather generic. A good example - common with errors in Reflection making a method invocation - is this generic error: Exception has been thrown by the target of an invocation In the debugger it looks like this: In this case this is an AJAX callback, which dynamically executes a method (ExecuteMethod code) which in turn calls into an Amazon Web Service using the old Amazon WSE101 Web service extensions for .NET. An error occurs in the Web Service call and the innermost exception holds the useful error information which in this case points at an invalid web.config key value related to the System.Net connection APIs. The "Exception has been thrown by the target of an invocation" error is the Reflection APIs generic error message that gets fired when you execute a method dynamically and that method fails internally. The messages basically says: "Your code blew up in my face when I tried to run it!". Which of course is not very useful to tell you what actually happened. If you drill down the InnerExceptions eventually you'll get a more detailed exception that points at the original error and code that caused the exception. In the code above the actually useful exception is two innerExceptions down. In most (but not all) cases when inner exceptions are returned, it's the innermost exception that has the information that is really useful. It's of course a fairly trivial task to do this in code, but I do it so frequently that I use a small helper method for this: /// <summary> /// Returns the innermost Exception for an object /// </summary> /// <param name="ex"></param> /// <returns></returns> public static Exception GetInnerMostException(Exception ex) { Exception currentEx = ex; while (currentEx.InnerException != null) { currentEx = currentEx.InnerException; } return currentEx; } This code just loops through all the inner exceptions (if any) and assigns them to a temporary variable until there are no more inner exceptions. The end result is that you get the innermost exception returned from the original exception. It's easy to use this code then in a try/catch handler like this (from the example above) to retrieve the more important innermost exception: object result = null; string stringResult = null; try { if (parameterList != null) // use the supplied parameter list result = helper.ExecuteMethod(methodToCall,target, parameterList.ToArray(), CallbackMethodParameterType.Json,ref attr); else // grab the info out of QueryString Values or POST buffer during parameter parsing // for optimization result = helper.ExecuteMethod(methodToCall, target, null, CallbackMethodParameterType.Json, ref attr); } catch (Exception ex) { Exception activeException = DebugUtils.GetInnerMostException(ex); WriteErrorResponse(activeException.Message, ( HttpContext.Current.IsDebuggingEnabled ? ex.StackTrace : null ) ); return; } Another function that is useful to me from time to time is one that returns all inner exceptions and the original exception as an array: /// <summary> /// Returns an array of the entire exception list in reverse order /// (innermost to outermost exception) /// </summary> /// <param name="ex">The original exception to work off</param> /// <returns>Array of Exceptions from innermost to outermost</returns> public static Exception[] GetInnerExceptions(Exception ex) {     List<Exception> exceptions = new List<Exception>();     exceptions.Add(ex);       Exception currentEx = ex;     while (currentEx.InnerException != null)     {         exceptions.Add(ex);     }       // Reverse the order to the innermost is first     exceptions.Reverse();       return exceptions.ToArray(); } This function loops through all the InnerExceptions and returns them and then reverses the order of the array returning the innermost exception first. This can be useful in certain error scenarios where exceptions stack and you need to display information from more than one of the exceptions in order to create a useful error message. This is rare but certain database exceptions bury their exception info in mutliple inner exceptions and it's easier to parse through them in an array then to manually walk the exception stack. It's also useful if you need to log errors and want to see the all of the error detail from all exceptions. None of this is rocket science, but it's useful to have some helpers that make retrieval of the critical exception info trivial. Resources DebugUtils.cs utility class in the West Wind Web Toolkit© Rick Strahl, West Wind Technologies, 2005-2011Posted in CSharp  .NET  

    Read the article

  • Ask the Readers: What’s the Best Order for Installing Apps on a New Computer?

    - by Jason Fitzpatrick
    Whether your computer is brand new or feels brand new after an OS refresh, we’re curious to see what order you install applications in. What goes on first? What goes on last? What is forgotten until you need it? This week, inspired by this Best Order to Install Everything guide over at the Windows 7 tutorial site 7 Tutorials, we’re curious to hear what order you’re installing applications in. Whether you just purchased a new PC, wiped an old one, or performed an upgrade the necessitates re-installing some apps, we want to hear about it. Sound off in the comments with your installation lists and tips; make sure to check back on Friday to see our What You Said roundup. How To Encrypt Your Cloud-Based Drive with BoxcryptorHTG Explains: Photography with Film-Based CamerasHow to Clean Your Dirty Smartphone (Without Breaking Something)

    Read the article

  • Umbraco Code Garden 2010 - Ticket Auction for Charity

    - by Vizioz Limited
    Hi All,When Code Garden 2010 was first announced I bought two early bird tickets for the conference as at the time I had hoped to offer the ticket to one of my developers, but unfortunately both of them are unable to make the conference so I am left with a spare ticket.Some people would try to sell the ticket to get the money back, but I thought I'd prefer to put the ticket up for auction and donate all the money to a charity called Able Kidz who help children with disabilities by providing them special computers and software.If you would like to bid for the ticket please look at the auction here:Umbraco Codegarden 2010 TicketHappy bidding and hopefully see the winner at Codegarden!

    Read the article

  • Visual History for Chrome Maps Out Your Browser History in an Interactive Graph

    - by Jason Fitzpatrick
    Curious how your adventures on the web interweave? Visual History for Chrome maps out related web sites in your browsing history into an interactive chart–visualize your browsing over the last hours, days, or months. One of the interesting elements of Visual History is that it doesn’t simply link sites together via activated hyperlinks but by consecutive use within 20 minute increments–thus if you frequently hit up Gmail, Facebook, and Reddit first thing in the morning, they’ll all appear together in a usage cluster. Site can be organized by URL, sub-domain, or domain. Visual History is free, Chrome only. Visual History for Chrome [Chrome Web Store] HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows?

    Read the article

  • Foundation CSS Framework, how to change triangle on accodion [migrated]

    - by CreateSean
    I'm using foundation framework for the first time and for the most part everything is going smoothly. I am however having some trouble with the accordion in that I need to change the open/close indicator triangle that is in use. You can see it in the docs here. I've looked through the css and found the section with the accordion on foundation.css at lines 709-719 but there is no image to change or adjust. I would like to change this icon to the one in my psd, but just can't figure out where. See attached screenshot for what needs to be changed. I know how to make changes, in this case I just can't find where to make the change.

    Read the article

  • Top 4 Lame Tech Blogging Posts

    - by jkauffman
    From a consumption point of view, tech blogging is a great resource for one-off articles on niche subjects. If you spend any time reading tech blogs, you may find yourself running into several common, useless types of posts tech bloggers slip into. Some of these lame posts may just be natural due to common nerd psychology, and some others are probably due to lame, lemming-like laziness. I’m sure I’ll do my fair share of fitting the mold, but I quickly get bored when I happen upon posts that hit these patterns without any real purpose or personal touches. 1. The Content Regurgitation Posts This is a common pattern fueled by the starving pan-handlers in the web traffic economy. These are posts that are terse opinions or addendums to an existing post. I commonly see these involve huge block quotes from the linked article which almost always produces over 50% of the post itself. I’ve accidentally gone to these posts when I’m knowingly only interested in the source material. Web links can degrade as well, so if the source link is broken, then, well, I’m pretty steamed. I see this occur with simple opinions on technologies, Stack Overflow solutions, or various tech news like posts from Microsoft. It’s not uncommon to go to the linked article and see the author announce that he “added a blog post” as a response or summary of the topic. This is just rude, but those who do it are probably aware of this. It’s a matter of winning that sweet, juicy web traffic. I doubt this leeching is fooling anybody these days. I would like to rally human dignity and urge people to avoid these types of posts, and just leave a comment on the source material. 2. The “Sorry I Haven’t Posted In A While” Posts This one is far too common. You’ll most likely see this quote somewhere in the body of the offending post: I have been really busy. If the poster is especially guilt-ridden, you’ll see a few volleys of excuses. Here are some common reasons I’ve seen, which I’ll list from least to most painfully awkward. Out of town Vague allusions to personal health problems (these typically includes phrases like “sick”, “treatment'”, and “all better now!”) “Personal issues” (which I usually read as "divorce”) Graphic or specific personal health problems (maximum awkwardness potential is achieved if you see links to charity fund websites) I can’t help but to try over-analyzing why this occurs. Personally, I see this an an amalgamation of three plain factors: Life happens Us nerds are duty-driven, and driven to guilt at personal inefficiencies Tech blogs can become personal journals I don’t think we can do much about the first two, but on the third I think we could certainly contain our urges. I’m a pretty boring guy and, whether or I like it or not, I have an unspoken duty to protect the world from hearing about my unremarkable existence. Nobody cares what kind of sandwich I’m eating. Similarly, if I disappear for a while, it’s unlikely that anybody who happens upon my blog would care why. Rest assured, if I stop posting for a while due to a vasectomy, you will be the first to know. 3. The “At A Conference”, or “Conference Review” Posts I don’t know if I’m like everyone else on this one, but I have never been successfully interested in these posts. It even sounds like a good idea: if I can’t make it to a particular conference (like the KCDC this year), wouldn’t I be interested in a concentrated summary of events? Apparently, no! Within this realm, I’ve never read a post by a blogger that held my interest. What really baffles is is that, for whatever reason, I am genuinely engaged and interested when talking to someone in person regarding the same topic. I have noticed the same phenomenon when hearing about others’ vacations. If someone sends me an email about their vacation, I gloss over it and forget about it quickly. In contrast, if I’m speaking to that individual in person about their vacation, I’m actually interested. I’m unsure why the written medium eradicates the intrigue. I was raised by a roaming pack of friendly wild video games, so that may be a factor. 4. The “Top X Number of Y’s That Z” Posts I’ve seen this one crop up a lot more in the past few of years. Here are some fabricated examples: 5 Easy Ways to Improve Your Code Top 7 Good Habits Programmers Learn From Experience The 8 Things to Consider When Giving Estimates Top 4 Lame Tech Blogging Posts These are attention-grabbing headlines, and I’d assume they rack up hits. In fact, I enjoy a good number of these. But, I’ve been drawn to articles like this just to find an endless list of identically formatted posts on the blog’s archive sidebar. Often times these posts have overlapping topics, too. These types of posts give the impression that the author has given thought to prioritize and organize the points as a result of a comprehensive consideration of a particular topic. Did the author really weigh all the possibilities when identifying the “Top 4 Lame Tech Blogging Patterns”? Unfortunately, probably not. What a tool. To reiterate, I still enjoy the format, but I feel it is abused. Nowadays, I’m pretty skeptical when approaching posts in this format. If these trends continue, my brain will filter these blog posts out just as effectively as it ignores the encroaching “do xxx with this one trick” advertisements. Conclusion To active blog readers, I hope my guide has served you precious time in being able to identify lame blog posts at a glance. Save time and energy by skipping over the chaff of the internet! And if you author a blog, perhaps my insight will help you to avoid the occasional urge to produce these needless filler posts.

    Read the article

  • Real User Experience Insight: Oracle’s Approach to User Experience

    - by JuergenKress
    This self-study course is the first in a series about Oracle Real User Experience Insight. Intended for a broad, general audience, this course begins with a discussion on why user experience is important, followed by Oracle’s approach to user experience. Next, several use cases for Real User Experience Insight is presented. The course ends by showing how Real User Experience Insight is integrated with Oracle Enterprise Manager 12c. This course is a suggested prerequisite for the other two self-studies in this series, one that focuses on basic navigation, data structures and workflows, and the other that focuses on best practices in deployment. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: real user experience,education,training,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

    Read the article

  • What’s New for Oracle Commerce? Executive QA with John Andrews, VP Product Management, Oracle Commerce

    - by Katrina Gosek
    Oracle Commerce was for the fifth time positioned as a leader by Gartner in the Magic Quadrant for E-Commerce. This inspired me to sit down with Oracle Commerce VP of Product Management, John Andrews to get his perspective on what continues to make Oracle a leader in the industry and what’s new for Oracle Commerce in 2013. Q: Why do you believe Oracle Commerce continues to be a leader in the industry? John: Oracle has a great acquisition strategy – it brings best-of-breed technologies into the product fold and then continues to grow and innovate them. This is particularly true with products unified into the Oracle Commerce brand. Oracle acquired ATG in late 2010 – and then Endeca in late 2011. This means that under the hood of Oracle Commerce you have market-leading technologies for cross-channel commerce and customer experience, both designed and developed in direct response to the unique challenges online businesses face. And we continue to innovate on capabilities core to what our customers need to be successful – contextual and personalized experience delivery, merchant-inspired tools, and architecture for performance and scalability. Q: It’s not a slow moving industry. What are you doing to keep the pace of innovation at Oracle Commerce? John: Oracle owes our customers the most innovative commerce capabilities. By unifying the core components of ATG and Endeca we are delivering on this promise. Oracle Commerce is continuing to innovate and redefine how commerce is done and in a way that drive business results and keeps customers coming back for experiences tailored just for them. Our January and May 2013 releases not only marked the seventh significant releases for the solution since the acquisitions of ATG and Endeca, we also continue to demonstrate rapid and significant progress on the unification of commerce and customer experience capabilities of the two commerce technologies. Q: Can you tell us what was notable about these latest releases under the Oracle Commerce umbrella? John: Specifically, our latest product innovations give businesses selling online the ability to get to market faster with more personalized commerce experiences in the following ways: Mobile: the latest Commerce Reference Application in this release offers a wider range of examples for online businesses to leverage for iOS development and specifically new iPad reference capabilities. This release marks the first release of the iOS Universal application that serves both the iPhone and iPad devices from a single download or binary. Business users can now drive page content management and layout of search results and category pages, as well as create additional storefront elements such as categories, facets / dimensions, and breadcrumbs through Experience Manager tools. Cross-Channel Commerce: key commerce platform capabilities have been added to support cross-channel commerce, including an expanded inventory model to maintain inventory for stores, pickup in stores and Web-based returns. Online businesses with in-store operations can now offer advanced shipping options on the web and make returns and exchange logic easily available on the web. Multi-Site Capabilities: significant enhancements to the Commerce Platform multi-site architecture that allows business users to quickly launch and manage multiple sites on the same cluster and share data, carts, and other components. First introduced in 2010, with this latest release business users can now partition or share customer profiles, control users’ site-based access, and manage personalization assets using site groups. Internationalization: continued language support and enhancements for business user tools as well and search and navigation. Guided Search now supports 35 total languages with 11 new languages (including Danish, Arabic, Norwegian, Serbian Cyrillic) added in this release. Commerce Platform tools now include localized support for 17 locales with 4 new languages (Danish, Portuguese (European), Finnish, and Thai). No development or customization is required in order for business users to use the applications in any of these supported languages. Business Tool Experience: valuable new Commerce Merchandising features include a new workflow for making emergency changes quickly and increased visibility into promotions rules and qualifications in preview mode. Oracle Commerce business tools continue to become more and more feature rich to provide intuitive, easy- to-use (yet powerful) capabilities to allow business users to manage content and the shopping experience. Commerce & Experience Unification: demonstrable unification of commerce and customer experience capabilities include – productized cartridges that provide supported integration between the Commerce Platform and Experience Management tools, cross-channel returns, Oracle Service Cloud integration, and integrated iPad application. The mission guiding our product development is to deliver differentiated, personalized user experiences across any device in a contextual manner – and to give the business the best tools to tune and optimize those user experiences to meet their business objectives. We also need to do this in a way that makes it operationally efficient for the business, keeping the overall total cost of ownership low – yet also allows the business to expand, whether it be to new business models, geographies or brands. To learn more about the latest Oracle Commerce releases and mission, visit the links below: • Hear more from John about the Oracle Commerce mission • Hear from Oracle Commerce customers • Documentation on the new releases • Listen to the Oracle ATG Commerce 10.2 Webcast • Listen to the Oracle Endeca Commerce 3.1.2 Webcast

    Read the article

  • My MSDN magazine articles are live

    - by Daniel Moth
    Five years ago I wrote my first MSDN magazine article, and 21 months later I wrote my second MSDN Magazine article (during the VS 2010 Beta). By my calculation, that makes it two and a half years without having written anything for my favorite developer magazine! So, I came back with a vengeance, and in this month's April issue of the MSDN magazine you can find two articles from yours truly - enjoy: A Code-Based Introduction to C++ AMP Introduction to Tiling in C++ AMP For more on C++ AMP, please remember that I blog about it on our team blog, and we take questions in our MSDN forum. Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • Ubuntu 12.04 installation never finishes

    - by Eric Carlsson
    I am trying to install Ubuntu 12.04 on an old Dell Latitude C400 laptop previously running windows XP using an Ubuntu install CD. The OS runs fine off the CD if a bit slow, and the installation starts off fine. However once the progress bar is filled I get put back to the desktop and nothing happens, first I assumed that the installation was completed but when I restarted the computer and booted from the hard drive nothing happened. I tried to install a few more times but the same thing happens. Am I doing something wrong? I do not get a error message or a installation complete notification. Is there any way I could get some kind of debug screen or log to see if something went wrong or at least follow the installation progress in more detail. Thanks for the help.

    Read the article

  • juju spends bootstrap-timeout with a final message it cannot find /var/lib/juju/nonce.txt

    - by user285199
    I build two VMware's machines. First one with MAAS, second one with a fresh installation from MAAS. Region controller was installed with Ubuntu 12.04 distribution, and upgraded (. Node computing was installed from MAAS with Quantal 12.10. Juju was installed and upgraded to 1.18 (from ppa:juju/stable repository). MAAS was upgraded from cloud-archive:tools repository. In debug mode, I got how Juju connects to node. Then I run the same instruction: ssh -o "StrictHostKeyChecking no" -o "PasswordAuthentication no" -i /home/lliurex/.juju/ssh/juju_id_rsa -i /home/lliurex/.ssh/id_rsa [email protected] /bin/bash It worked (with and without /bin/bash). When Juju spends all bootstrap-timeout tells it has not found /var/lib/juju/nonce.txt file. It's true, it doesn't exist. It doesn't mind if you put a timeout of 1800, 3600 or 72000, it always finishes the same.

    Read the article

  • SQLAuthority News – Meeting SQL Friends – SQLPASS 2011 Event Log

    - by pinaldave
    One of the biggest reason I go to SQLPASS is that my friends are going there too. There are so many friends with whom I often talk on Facebook and Twitter but I rarely get time to meet them as well talk with them. One thing I am usually sure that many fo them will be for sure attend SQLPASS. This is one event which every SQL Server Enthusiast should attend. Just like everybody I had pleasant time to meet many of my SQL friends. There were so many friends that I met and I did not click photo. There were so many friends who clicked photo in their camera and I do not have them. Here are 1% of the photos which I have. If you are not in the photo, it does not mean I have less respect to our friendship. Please post link to our photo together :) I was very fortunate that I was able to snap a quick photograph with Pinal Dave with Dr. David DeWitt. I stood outside of the hall waiting for Dr. to show up and when he was heading down from convention center I requested him if I can have one photo for my memory lane and very politely he agreed to have one. It indeed made my day! Pinal Dave with Dr. David DeWitt Every single time I met Steve, I make sure I have one photo for my memory. Steve is so kind every single time. If you know SQL and do not know Steve Jones, you do not know SQL (IMHO). Following is the photograph with Michael McLean. More details about this photo in future blog post! Pinal Dave, Michael McLean, and Rick Morelan Arnie always shares his wisdom with me. I still remember when I very first time visited USA, I was standing alone in corner and Arnie walked to me and introduced to every single person he know. Talking to Arnie is always pleasure and inspiring. Arnie Rowland and Pinal Dave I am now published author and have written two books so far. I am fortunate to have Rick Morelan as Co-author of both of my books. He is great guy and very easy to become friends with. I am very much impressed by him and his kindness during book co-authoring. Here is very first of our photograph together at SQLPASS. Rick Morelan and Pinal Dave Diego Nogare and I have been talking for long time on twitter and on various social media channels. I finally got chance to meet my friend from Brazil. It was excellent experience to meet a friend whom one wants to meet for long time and had never got chance earlier. Buck Woody – who does not know Buck. He is funny, kind and most important friends of every one. Buck is so kind that he does not hesitate to approach people even though he is famous and most known in community. Every time I meet him I learn something. He is always smiling and approachable. Pinal Dave and Buck Woddy Rushabh Mehta is current SQL PASS president and personal friend. He has always smiling face and tremendous love for SQL community. I often wonder where he gets all the time for all the time and efforts he puts in for community. I never miss a chance to meet and greet him. Even though he is renowned SQL Guru and extremely busy person – every single time I meet him he always asks me – “How is Nupur and Shaivi?” He even remembers my wife and daughters name. I am touched. Rushabh Mehta and Pinal Dave Nigel Sammy has extremely well sense of humor and passion from community. We have excellent synergy while we are together. The attached photo is taken while I was talking to him on Seattle Shoreline about SQL. Pinal Dave and Nigel Sammy Rick Morelan wanted my this trip to be memorable. I am vegetarian and I told him that I do not like Seafood. Well, to prove the point, he took me to fantastic Seafood restaurant in Seattle and treated me with mouth watering vegetarian dishes. I think when I go to Seattle next time, I am going to make him to take me again to the same place. Rick, Rushabh, Pinal and Paras Well, this is a short summary of few of the friends I met at Seattle. What is the life without friends, eh? Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL PASS, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, T SQL, Technology

    Read the article

  • Connecting to Microsoft Excel using Oracle Data Integrator

    - by julien.testut
    The posts in this series assume that you have some level of familiarity with ODI. The concepts of Topology, Data Server, Physical and Logical Architecture are used here assuming that you understand them in the context of ODI. If you need more details on these elements, please refer to the ODI Tutorial for a quick introduction, or to the complete ODI documentation for more details. In this post I will describe how a Microsoft Excel spreadsheet can be used in Oracle Data Integrator. Microsoft Excel is one of the many different technologies you can leverage in ODI as a source or as a target. Prepare your Excel spreadsheet Prior to using a Microsoft Excel spreadsheet in ODI we need to specify a name for the different cell tables we want to use. You can have multiple names in the same spreadsheet. First open up a Microsoft Excel spreadsheet, we will need to define a named range.

    Read the article

  • Protecting offline IRM rights and the error "Unable to Connect to Offline database"

    - by Simon Thorpe
    One of the most common problems I get asked about Oracle IRM is in relation to the error message "Unable to Connect to Offline database". This error message is a result of how Oracle IRM is protecting the cached rights on the local machine and if that cache has become invalid in anyway, this error is thrown. Offline rights and security First we need to understand how Oracle IRM handles offline use. The way it is implemented is one of the main reasons why Oracle IRM is the leading document security solution and demonstrates our methodology to ensure that solutions address both security and usability and puts the balance of these two in your control. Each classification has a set of predefined roles that the manager of the classification can assign to users. Each role has an offline period which determines the amount of time a user can access content without having to communicate with the IRM server. By default for the context model, which is the classification system that ships out of the box with Oracle IRM, the offline period for each role is 3 days. This is easily changed however and can be as low as under an hour to as long as years. It is also possible to switch off the ability to access content offline which can be useful when content is very sensitive and requires a tight leash. So when a user is online, transparently in the background, the Oracle IRM Desktop communicates with the server and updates the users rights and offline periods. This transparent synchronization period is determined by the server and communicated to all IRM Desktops and allows for users rights to be kept up to date without their intervention. This allows us to support some very important scenarios which are key to a successful IRM solution. A user doesn't have to make any decision when going offline, they simply unplug their laptop and they already have their offline periods synchronized to the maximum values. Any solution that requires a user to make a decision at the point of going offline isn't going to work because people forget to do this and will therefore be unable to legitimately access their content offline. If your rights change to REMOVE your access to content, this also happens in the background. This is very useful when someone has an offline duration of a week and they happen to make a connection to the internet 3 days into that offline period, the Oracle IRM Desktop detects this online state and automatically updates all rights for the user. This means the business risk is reduced when setting long offline periods, because of the daily transparent sync, you can reflect changes as soon as the user is online. Of course, if they choose not to come online at all during that week offline period, you cannot effect change, but you take that risk in giving the 7 day offline period in the first place. If you are added to a NEW classification during the day, this will automatically be synchronized without the user even having to open a piece of content secured against that classification. This is very important, consider the scenario where a senior executive downloads all their email but doesn't open any of it. Disconnects the laptop and then gets on a plane. During the flight they attempt to open a document attached to a downloaded email which has been secured against an IRM classification the user was not even aware they had access to. Because their new role in this classification was automatically synchronized their experience is a good one and the document opens. More information on how the Oracle IRM classification model works can be found in this article by Martin Abrahams. So what about problems accessing the offline rights database? So onto the core issue... when these rights are cached to your machine they are stored in an encrypted database. The encryption of this offline database is keyed to the instance of the installation of the IRM Desktop and the Windows user account. Why? Well what you do not want to happen is for someone to get their rights for content and then copy these files across hundreds of other machines, therefore getting access to sensitive content across many environments. The IRM server has a setting which controls how many times you can cache these rights on unique machines. This is because people typically access IRM content on more than one computer. Their work desktop, a laptop and often a home computer. So Oracle IRM allows for the usability of caching rights on more than one computer whilst retaining strong security over this cache. So what happens if these files are corrupted in someway? That's when you will see the error, Unable to Connect to Offline database. The most common instance of seeing this is when you are using virtual machines and copy them from one computer to the next. The virtual machine software, VMWare Workstation for example, makes changes to the unique information of that virtual machine and as such invalidates the offline database. How do you solve the problem? Resolution is however simple. You just delete all of the offline database files on the machine and they will be recreated with working encryption when the Oracle IRM Desktop next starts. However this does mean that the IRM server will think you have your rights cached to more than one computer and you will need to rerequest your rights, even though you are only going to be accessing them on one. Because it still thinks the old cache is valid. So be aware, it is good practice to increase the server limit from the default of 1 to say 3 or 4. This is done using the Enterprise Manager instance of IRM. So to delete these offline files I have a simple .bat file you can use; Download DeleteOfflineDBs.bat Note that this uses pskillto stop the irmBackground.exe from running. This is part of the IRM Desktop and holds open a lock to the offline database. Either kill this from task manager or use pskillas part of the script.

    Read the article

  • Ubuntu 12.04 install DVD-RW recorder PATA as SCSI

    - by Alexandre Gatelli
    Ubuntu 12.04 64-bit installed DVD-RW recorder PATA as SCSI. My DVD-RW recorder is in /dev/sr0 as SCSI. I opened Disk Management and my IDE PATA drive is installed as SCSI. I can't use this drive because it hangs computer (I need press reset button on CPU to back to Ubuntu). What do I do for the drive back to function with the correct drive (IDE mode)? With the first kernel version of the Ubuntu 12.04 64-bit was all functioning. Help me please.

    Read the article

  • Create Awesome Map-Based Wallpapers for Your Desktop with ‘Map –> Image’

    - by Asian Angel
    Are you tired of using the same old types of wallpapers on your desktop? Then add something fresh and unique to your desktop with custom-created map wallpapers from ‘Map – Image’. When you first visit the website it will show the default location of San Francisco (home of the developers). To get started simply enter your location in the search blank in the upper left corner and click the Go Button. Your chosen location will appear in a basic black and white format as shown here. 6 Start Menu Replacements for Windows 8 What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives? How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8

    Read the article

  • Dynamic Grouping and Columns

    - by Tim Dexter
    Some good collaboration between myself and Kan Nishida (Oracle BIP Consulting) over at bipconsulting on a question that came in yesterday to an internal mailing list. Is there a way to allow columns to be place into a template dynamically? This would be similar to the Answers Column selector. A customer has said Crystal can do this and I am trying to see how BI Pub can do the same. Example: Report has Regions as a dimension in a table, they want the user to select a parameter that will insert either Units or Dollars without having to create multiple templates. Now whether Crystal can actually do it or not is another question, can Publisher? Yes we can! Kan took the first stab. His approach, was to allow to swap out columns in a table in the report. Some quick steps: 1. Create a parameter from BIP server UI 2. Declare the parameter in RTF template You can check this post to see how you can declare the parameter from the server. http://bipconsulting.blogspot.com/2010/02/how-to-pass-user-input-values-to-report.html 3. Use the parameter value to condition if a particular column needs to be displayed or not. You can use <?if@column:.....?> syntax for Column level IF condition. The if@column is covered in user documentation. This would allow a developer to create a report with the parameter or multiple parameters to allow the user to pick a column to be included in the report. I took a slightly different tack, with the mention of the column selector in the Answers report I took that to mean that the user wanted to select more of a dimensional column and then have the report recalculate all its totals and subtotals based on that selected column. This is a little bit more involved and involves some smart XSL and XPATH expressions, but still very doable. The user can select a column as a parameter, that is passed to the template rather than the query. The parameter value that is actually passed is the element name that you want to regroup the data by. Inside the template we then reference that parameter value in our for-each-group loop. That's where we need the trixy XSL/XPATH code to get the regrouping to happen. At this juncture, I need to hat tip to Klaus, for his article on dynamic sorting that he wrote back in 2006. I basically took his sorting code and applied it to the for-each loop. You can follow both of Kan's first two steps above i.e. Create a parameter from BIP server UI - this just needs to be based on a 'list' type list of value with name/value pairs e.g. Department/DEPARTMENT_NAME, Job/JOB_TITLE, etc. The user picks the 'friendly' value and the server passes the element name to the template. Declare the parameter in RTF template - been here before lots of times right? <?param@begin:group1;'"DEPARTMENT_NAME"'?> I have used a default value so that I can test the funtionality inside the template builder (notice the single and double quotes.) Next step is to use the template builder to build a re-grouped report layout. It does not matter if its hard coded right now; we will add in the dynamic piece next. Once you have a functioning template that is re-grouping correctly. Open up the for-each-group field and modify it to use the parameter: <?for-each-group:ROW;./*[name(.) = $group1]?> 'group1' is my grouping parameter, declared above. We need the XPATH expression to find the column in the XML structure we want to group that matches the one passed by the parameter. Its essentially looking through the data tree for a match. We can show the actual grouping value in the report output with a similar XPATH expression <?./*[name(.) = $group1]?> In my example, I took things a little further so that I could have a dynamic label for the parameter value. For instance if I am using MANAGER as the parameter I want to show: Manager: Tim Dexter My XML elements are readable e.g. DEPARTMENT_NAME. Its a simple case of replacing the underscore with a space and then 'initcapping' the result: <?xdoxslt:init_cap(translate($group1,'_',' '))?> With this in place, the user can now select a grouping column in the BIP report viewer and the layout will re-group the data and any calculations based on that column. I built a group above report but you could equally build the group left version to truly mimic the Answers column selector. If you are interested you can get an example report, sample data and layout template here. Of course, you can combine Klaus' dynamic sorting, Kan's conditional column approach and this dynamic grouping to build a real kick ass report for users that will keep them happy for hours..

    Read the article

  • Using Web Services from an XNA 4.0 WP7 Game

    - by Michael Cummings
    Now that the Windows Phone 7 development tools have been out for a while, let’s talk about how you can use them. Windows Phone 7 ( WP7 ) has two application types that you can create, either Silverlight or XNA, and you can’t really mix the two together. The development environment for WP7 is a special edition of Visual Studio 2010 called Visual Studio 2010 Express for Windows Phone. This edition will be installed with the WP7 tools, even if you have a full edition of VS2010 already installed. While you can use your full edition of VS2010 to do WP7 development, this astute developer has noticed that there are a few things that you can only do in the Express for Windows Phone edition. So lets start by discussing WP7 networking. On the WP7 platform the only networking available is through Web Services using WCF or if you’re really masochistic, you’ll use the WebClient to do http. In Silverlight, it’s fairly easy to wire up a WCF proxy to call a web service and get some data. In the XNA projects, not so much. Create WCF Service First, we’ll create our service that will return some information that we need in our game. Open Visual Studio 2010, and create a new WCF Web Service project. We’ll use the default implementation as we only need to see how to use a service, we are not interested in creating a really cool service at this point. However you may want to follow the instructions in the comments of Service1.svc.cs to change the name to something better, I used DataService and IDataService for the interface. You should now be able to run the project and the WCF Test Client will load and properly enumerate your service. At this point we have a functional service that can be consumed by our XNA game. Consume the WCF Service Open Visual Studio 2010 Express for Windows Phone and create a new XNA Game Studio 4.0 Windows Phone Game project. Now if you try to add a service reference to the project, you’ll notice that the option is not available. However, if you add a Silverlight application to your solution, you’ll notice that you can create a service reference there. So using the Silverlight project, we can create the service reference. Unfortunately you can’t reference the Silverlight project from the XNA Game project, so using Windows Explorer copy the Service References folder from the Silverlight project directory to the XNA Game project directory, then add the folder to your XNA Game project. You’ll need to set the property Build Action to None for all the files, except for Reference.cs, which should be Build. Truely, we only need Reference.cs but I find it easier to copy the whole folder. If you try to compile at this point, you’ll notice that we are missing  a couple of references, System.Runtime.Serialization, System.Net and System.ServiceModel. Add these to the XNA Game project and you should build successfully. You’ll also need to copy the ServiceReference.ClientConfig file and add it to your project. The WCF infrastructure looks for this file and will complain if it can’t find it. You’ll need to set the Copy to Output Directory property to Copy if Newer. We now need to add the code to call the service and display the results on the screen. Go ahead and add a SpriteFont resource to the Content project and load it in the Game project. There’s nothing here that’s changed much from 3.1 other than your Content project is now under the Solution node and not the Project node. While you’re at it, add a string field to store the result of the service call, and intialize it to string.Empty. Then in the Draw method, write the string out to the screen, only if it does not equal string.Empty. Now to wrap this up, lets create a new field that’s of the type DataServiceClient. In the Initialize Method, create a new instance of this type using its default contructor, then in the LoadContent we can call the service. Since we can only call the GetData method of our service asynchronously we need to set up a Completed event handler first. Thankfully, Visual Studio helps out a lot there just create, using the tab key whatever VS says to. In the GetDataAsyncCompleted event handler assign the service result ( e.Result) to your string field. If you run your game, you should get something like this : Enjoy!

    Read the article

  • 2010 Collaboration Summit Impressions

    - by Elena Zannoni
    It's a bit late, but there you have it anyway. April 14 to 16 I attended the Linux Foundation Collaboration Summit in SFO. I was running two tracks, one on tracing and one on tools. You can see the tracks and the slides here: http://events.linuxfoundation.org/events/collaboration-summit/slides I was pretty busy both days, Thursday with a whole day tracing track, Friday with a half day toolchain track. The sessions were well attended, the rooms were full, with people spilling in the hallways. Some new things were presented, like Kernelshark, by Steve Rostedt, a GUI (yes, believe it or not, a GUI) written in GTK. It is very nice, showing a timeline for traced kernel events, and you can zoom in and filter at will. It works on the latest kernels, and it requires some new things/fixes in GTK. I don't recall exactly what version of GTK though. Dominique Toupin from Ericsson presented something about user requirements for tracing. Mostly though about who's who in the embedded world, and eclipse. Masami and Mathieu presented an update on their work. See their slides. The interesting thing to me was of course the new version of uprobes w/o underlying utrace presented by Jim Keniston. At the end of the session we had a discussion about the future of utrace. Roland wasn't there, butTom Tromey (also from RedHat) collected the feedback. Basically we are at a standstill now that utrace has been rejected yet again. There wasn't much advise that anybody could give, except jokingly, we decided that the only way in is to make it a part of perf events. There needs to be another refactoring, but most of all, this "killer app" that would be enabled because of utrace hasn't materialized yet. We think that having a good debugging story on Linux is enough of a killer app, for instance allowing multiple tracers, and not relying on SIGCHLD etc. I think this wasn't completely clear to the kernel community. Trying to achieve debugging via a gdb stub inside the kernel interfacing to utrace and that is controlled via the gdb remote protocol also lost its appeal (thankfully, since the gdb remote protocol is archaic). Somebody would have to be creative in how to submit utrace. It doesn't have to be called utrace (it was really a random choice, for lack of a letter that was not already used in front of the word "trace"). So basically, I think the ideas behind utrace are sound, and the necessity of a new interface is acknowledged. But I believe the integration/submission process with the kernel folks has to restart from scratch, clean slate. We'll see. There are many conferences and meetings coming up in the near future where things can be discussed further. On the second day, Friday, we had the tools talks. It was interesting to observe the more "kernel" oriented people's behavior towards the gcc etc community. The first talk was by Mark Mitchell, about Gcc and its new plugin architecture. After that, Paolo talked about the new C++1x standard, which will be finalized in 2011. Many features are already implemented in the libstdc++ library and gcc and usable today. We had a few minutes (really, the half day track was quite short) where Bradley Kuhn from the Software Freedom Law Center explained the GPLv3 exception for gcc (due to the new gcc plugin architecture and the availability of the intermediate results from the compilation, which is a new thing). I will not try to explain, but basically you cannot take the result of the preprocessing and then use that in your own proprietary compiler. After, we had a talk by Ian Taylor about the new Gold linker. One good thing in that area is that they are trying to make gold the new default linker (for instance Fedora will use gold as the distro linker). However gold is very different from binutils' old linker. It doesn't use a linker script, for instance. The kernel has been linked with gold many times as an exercise (the ground work was done by Kris Van Hees), but this needs to be constantly tested/monitored because the kernel linker script is very complex, and uses esoteric features (Wenji is now monitoring that each kernel RC can be built with gold). It was positive that people are now aware of gold and the need for it to be ported to more architectures. It seems that the porting is very easy, with little arch dependent code. Finally Tom Tromey presented about gdb and the archer project. Archer is a development branch of gdb mostly done by RedHat, where they are focusing on better c++ printing, c++ expression parsing, and plugins. The archer work is merged regularly in the gdb mainline. In general it was a good conference. I did miss most of the first day, because that's when I flew in. But I caught a couple of talks. Nothing earth shattering, except for Google giving each person registered a free Android phone. Yey.

    Read the article

  • Pixel Shader - apply a mask (XNA)

    - by Michal Bozydar Pawlowski
    I'd like to apply a simple few masks to few images. The first mask I'd like to implement is mask like: XXXOOO I mean, that on the right everything is masked (to black), and on the left everything is stayed without changes. The second mask I'd like to implement is glow mask. I mean something like this: O O***O O**X**O O***O O What I mean, is a circle mask, which in the center everything is saved without changes, and going outside the circle everything is starting to be black The last mask is irregular mask. For example like this: OOO* O**X**O OO**OO**O OO*X*O O*O O Where: O - to black * - to gray X - without changes I've read, how to apply distortion pixel shader in XNA: msdn Could you explain me how to apply mute mask on an image? (mask will be grayscale)

    Read the article

  • Windows 8 changes GRUB2 in every boot!

    - by yxd
    I've installed Win8 and Ubuntu 12.10 both UEFI style (win8 first then ubuntu). GRUB2 shows me Both Ubuntu and Win8 entries. If I boot into Ubuntu is fine. I could reboot anytime I will see GRUB2 unchanged. The story changes when I Boot into Win8. When I boot to Win8 using GRUB2 it takes me to the Windows Boot manager (which only has the Windows 8 entry). I hit Windows and it boots fine. When I reboot, there's no GRUB2 nor Win loader. It has no boot loader. I boot a liveCD and download boot-repair and everything is back. It's a never ending cycle. Is GRUB2 supposed to load the Win boot loader? What can I do to fix it?

    Read the article

  • How can I sync with an iPod Nano 6G?

    - by Martin
    I'm having no luck at all with this iPod Nano. I've tried the following software: Banshee - The iPod shows up and files seem to be copied, but they don't show up on the iPod. Rhythmbox - Same as Banshee. Claims to sync but no files available on the iPod gPodder - At first it wouldn't even recognize the device even though I set the mount point and device type. After syncing one file to the iPod from iTunes on my mac it now behaves as Banshee and Rythmbox. gtkpod - Again: Copies the files but they are inacessible on the iPod. Hipo - Doesn't even recognize the iPod Amarok - What is this, I don't even... So to summarize: After some fiddling I can get most of these apps to recognize the iPod and copy files to it, but they are not accessible on the iPod which sort of defeats the whole purpose. Help me out here. My continued harmonic love life depends on it. (Yes, it's the girlfriends iPod and laptop)

    Read the article

  • Logical Domain Modeling Made Simple

    - by Knut Vatsendvik
    How can logical domain modeling be made simple and collaborative? Many non-technical end-users, managers and business domain experts find it difficult to understand the visual models offered by many UML tools. This creates trouble in capturing and verifying the information that goes into a logical domain model. The tools are also too advanced and complex for a non-technical user to learn and use. We have therefore, in our current project, ended up with using Confluence as tool for designing the logical domain model with the help of a few very useful plugins. Big thanks to Ole Nymoen and Per Spilling for their expertise in this field that made this posting possible. Confluence Plugins Here is a list of Confluence plugins used in this solution. Install these before trying out the macros used below. Plugin Description Copy Space Allows a space administrator to copy a space, including the pages within the space Metadata Supports adding metadata to Wiki pages Label Manages labeling of pages Linking Contains macros for linking to templates, the dashboard and other Table Enhances the table capability in Confluence Creating a Confluence Space First we need to create a new confluence space for the domain model. Click the link Create a Space located below the list of spaces on the Dashboard. Please contact your Confluence administrator is you do not have permissions to do this.   For illustrative purpose all attributes and entities in this posting are based on my imaginary project manager domain model. When a logical domain model is good enough for being implemented, do a copy of the Confluence Space (see Copy Space plugin). In this way you create a stable version of the logical domain model while further design can continue with the new copied space. Typical will the implementation phase result in a database design and/or a XSD schema design. Add Space Templates Go to the Home page of your Confluence Space. Navigate to the Browse drop-down menu and click on Advanced. Then click the Templates option in the left navigation panel. Click Add New Space Template to add the following three templates. Name: attribute {metadata-list} || Name | | || Type | | || Format | | || Description | | {metadata-list} {add-label:attribute} Name: primary-type {metadata-list} || Name | || || Type | || || Format | || || Description | || {metadata-list} {add-label:primary-type} Name: complex-type {metadata-list} || Name | || || Description |  || {metadata-list} h3. Attributes || Name || Type || Format || Description || | [name] | {metadata-from:name|Type} | {metadata-from:name|Format} | {metadata-from:name|Description} | {add-label:complex-type,entity} The metadata-list macro (see Metadata plugin) will save a list of metadata values to the page. The add-label macro (see Label plugin) will automatically label the page. Primary Types Page Our first page to add will act as container for our primary types. Switch to Wiki markup when adding the following content to the page. | (+) {add-page:template=primary-type|parent=@self}Add new primary type{add-page} | {metadata-report:Name,Type,Format,Description|sort=Name|root=@self|pages=@descendents} Once the page is created, click the Add new primary type (create-page macro) to start creating a new pages. Here is an example of input to the LocalDate page. Embrace the LocalDate with square brackets [] to make the page linkable. Again switch to Wiki markup before editing. {metadata-list} || Name | [LocalDate] || || Type | Date || || Format | YYYY-MM-DD || || Description | Date in local time zone. YYYY = year, MM = month and DD = day || {metadata-list} {add-label:primary-type} The metadata-report macro will show a tabular report of all child pages.   Attributes Page The next page will act as container for all of our attributes. | (+) {add-page:template=attribute|parent=@self|title=attribute}Add new attribute{add-page} | {metadata-report:Name,Type,Format,Description|sort=Name|pages=@descendants} Here is an example of input to the startDate page. {metadata-list} || Name | [startDate] || || Type | [LocalDate] || || Format | {metadata-from:LocalDate|Format} || || Description | The projects start date || {metadata-list} {add-label:attribute} Using the metadata-from macro we fetch the text from the previously created LocalDate page. Complex Types Page The last page in this example shows how attributes can be combined together to form more complex types.   h3. Intro Overview of complex types in the domain model. | (+) {add-page:template=complex-type|parent=@self}Add a new complex type{add-page}\\ | {metadata-report:Name,Description|sort=Name|root=@self|pages=@descendents} Here is an example of input to the ProjectType page. {metadata-list} || Name | [ProjectType] || || Description | Represents a project || {metadata-list} h3. Attributes || Name || Type || Format || Description || | [projectId] | {metadata-from:projectId|Type} | {metadata-from:projectId|Format} | {metadata-from:projectId|Description} | | [name] | {metadata-from:name|Type} | {metadata-from:name|Format} | {metadata-from:name|Description} | | [description] | {metadata-from:description|Type} | {metadata-from:description|Format} | {metadata-from:description|Description} | | [startDate] | {metadata-from:startDate|Type} | {metadata-from:startDate|Format} | {metadata-from:startDate|Description} | {add-label:complex-type,entity} Gives us this Conclusion Using a web-based corporate Wiki like Confluence to create a logical domain model increases the collaboration between people with different roles in the enterprise. It’s my believe that this helps the domain model to be more accurate, and better documented. In our real project we have more pages than illustrated here to complete the documentation. We do also still use UML tools to create different types of diagrams that Confluence do not support. As a last tip, an ImageMap plugin can make those diagrams clickable when used in pages. Enjoy!

    Read the article

< Previous Page | 479 480 481 482 483 484 485 486 487 488 489 490  | Next Page >