orientation changes - Page 483

Need to kill a session?

- by rob - not a robber

Really quick here... I think I have the answer, but just looking for some validation. I have a site with two "points of entry." One is for a standard user and one is for an admin account. In the real world, an admin could have a standard user account and try to login as an admin while already being under the standard user session. I have two separate front ends to facilitate login. The normal user one is frilly and has ads and the like, the admin one is strictly business, so any suggestion to have the two user types login through the same "door" is not on the table. Would you advise on the admin login page to destroy any active sessions? Once the admin is in, they'll only be tooling around in their admin area and not on the main site. Has anyone run into probs using this method and having an admin-type user try to log back in in a new window as a "user" to view changes from a logged in user's prespective? Thanks in advance. So many cans of worms :)

Read the article

What's the expectation for silverlight 2's lifespan?

- by dwidel

Way back when I built an internal site for a customer using silverlight 2. They've been happy with it and I've barely had to touch it. Is the expectation that this site will always work? What I'm afraid of is suddenly getting a call years from now that the users installed silverlight X and now it's broken and I'm going to have to convert it immediately past Y versions of Silverlight to get the site back up, and I don't even do Silverlight anymore. I already went through this once when it went from 2 beta to 2 release and and scrambling to fix all the breaking changes and get the site back up. It wasn't as big a deal then as we were in beta anyway. I could upgrade now but it would be really tough to go back to the customer and ask for money to do an upgrade when they are happy now and will see no noticeable benefit from staying current. Additionally there are some third party controls that would have to be licensed again. So I guess what I'm asking is there a known end of life? Or do we just play it by ear?

Read the article

jeditable not working

- by zurna

I did not make any changes on the code. I dont receive any errors but its not working. I must be missing something very very simple here. Any suggestion appreciated... Test link. http://www.aslanyurek.com/inner.asp?Section=commentary&CommentaryID=1 $('.GameStory').editable('content/commentary/index.cs.asp?Process=EditLiveCommentary&CommentaryID=<%=Request.QueryString("CommentaryID")%>', { type : 'textarea', id : 'elementid', name : 'CommentaryDesc', cancel : 'Cancel', submit : 'OK', indicator : '<img src="img/indicator.gif">', tooltip : 'Click to edit...', cssclass : 'someclass' }); <div class="GameStory"> <p><span class="minute">36'</span>Here comes the pressure as Chelsea suddenly begin to up the tempo and Bolton can't keep the ball or clear it out of their own half.</p> <p><span class="minute">34'</span>Yuri Zhirkov, despite his head wound, is having a really good game and seems to be enjoying the freedom that he has been given to attack from his left back berth tonight.</p> <p><span class="minute">27'</span>Drogba whips in a free-kick that Jaaskelainen, for some reason, decides to punch straight into the face of Salomon Kalou who watches on as the ball rolls agonisingly of the post. Scare for Bolton.</p> <p><span class="minute">4'</span>Chelsea face Bolton at 8pm on Tuesday, April 13th.</p> <p><span class="minute">3'</span>Lively start at the Bridge with both sides looking to attack - it is by no means a defensive lineup from Owen Coyle so this could be an interesting game.</p> <p><span class="minute">0'</span>Nicolas Anelka gets the first shot of the match in on goal but its very tamely struck and Jaaskelainen gathers easily.</p> </div>

Read the article

Preventing iframe caching in browser

- by Zarjay

How do you prevent Firefox and Safari from caching iframe content? I have a simple webpage with an iframe to a page on a different site. Both the outer page and the inner page have HTTP response headers to prevent caching. When I click the "back" button in the browser, the outer page works properly, but no matter what, the browser always retrieves a cache of the iframed page. IE works just fine, but Firefox and Safari are giving me trouble. My webpage looks something like this: <html> <head></head> <body>  <iframe src="webpage2.html?var=xxx" />  </body> </html> The var variable always changes. Despite the fact that the URL of the iframe has changed (and thus, the browser should be making a new request to that page), the browser just fetches the cached content. I've examined the HTTP requests and responses going back and forth, and I noticed that even if the outer page contains <iframe src="webpage2.html?var=222" />, the browser will still fetch webpage2.html?var=111. Here's what I've tried so far: Changing iframe URL with random var value Adding Expires, Cache-Control, and Pragma headers to outer webpage Adding Expires, Cache-Control, and Pragma headers to inner webpage I'm unable to do any JavaScript tricks because I'm blocked by the same-origin policy. I'm running out of ideas. Does anyone know how to stop the browser from caching the iframed content?

Read the article

Easy way to observe user activity - how improve my database structure.

- by Thomas

Welcome, I need some advise to improve perfomence my web application. In the begin I had this structure of database: USER -id (Primary Key) -name -password -email .... PROFILE -user Primary Key, Foreign Key (USER) -birthday -region -photoFile ... PAGES -id (Primary Key) -user Foreign Key(USER) -page -date COMMENTS -id (Primary Key) -user Foreign Key(USER) -page Foreign Key(PAGE) -comment -date FAVOURITES_PAGES -id (Primary Key) -user Foreign Key(USER) -favourite_page Foreign Key(PAGE) -date but now one of the most important page of website is observatory, when everyone can observe activity others users. So I need select all pages, comments and favourites pages some users and display it in one list, sorted by date. For better perfomance (I think) I changed my structure to this: table USER and PROFILE without changes ACTIVITY (additional table- have common fields: user,date) -id (Primary Key) -user Foreign Key(USER) -date -page Foreign Key(PAGE) -comment Foreign Key(COMMENTS) -favourite_page Foreign Key(FAVOURITES_PAGES) PAGES -id (Primary Key) -page COMMENTS -id (Primary Key) -page Foreign Key(PAGE) -comment FAVOURITES_PAGES -id (Primary Key) -favourite_page Foreign Key(PAGE) So now it is very easy get sorted records from all tables. But I have no only foreign key to PAGES, COMMENTS and FAVOURITES_PAGES in ACTIVITY table - there is about ten Foreign Key fields and in one record only one have value, others have None: ACTIVITY id user date page comment ... 1 2 2010-02-23 None 1 2 1 2010-02-21 1 None .... It is corect solution. When I display about 40 records in one page (pagination) I must wait about one secound, but database is almost emty (a few users and about 100 records in others tables). It is depends on amount records per page - I have checked it, but why it takes too long time, becouse of relationships? The website is built in Python/Django. Any advices/opinion?

Read the article

Date since 1600 to NSDate?

- by Steven Fisher

I have a date that's stored as a number of days since January 1, 1600 that I need to deal with. This is a legacy date format that I need to read many, many times in my application. Previously, I'd been creating a calendar, empty date components and root date like this: self.gregorian = [[[NSCalendar alloc] initWithCalendarIdentifier: NSGregorianCalendar ] autorelease]; id rootComponents = [[[NSDateComponents alloc] init] autorelease]; [rootComponents setYear: 1600]; [rootComponents setMonth: 1]; [rootComponents setDay: 1]; self.rootDate = [gregorian dateFromComponents: rootComponents]; self.offset = [[[NSDateComponents alloc] init] autorelease]; Then, to convert the integer later to a date, I use this: [offset setDay: theLegacyDate]; id eventDate = [gregorian dateByAddingComponents: offset toDate: rootDate options: 0]; (I never change any values in offset anywhere else.) The problem is I'm getting a different time for rootDate on iOS vs. Mac OS X. On Mac OS X, I'm getting midnight. On iOS, I'm getting 8:12:28. (So far, it seems to be consistent about this.) When I add my number of days later, the weird time stays. OS | legacyDate | rootDate | eventDate ======== | ========== | ==========================|========================== Mac OS X | 143671 | 1600-01-01 00:00:00 -0800 | 1993-05-11 00:00:00 -0700 iOS | 143671 | 1600-01-01 08:12:28 +0000 | 1993-05-11 07:12:28 +0000 In the previous release of my product, I didn't care about the time; now I do. Why the weird time on iOS, and what should I do about it? (I'm assuming the hour difference is DST.) I've tried setting the hour, minute and second of rootComponents to 0. This has no impact. If I set them to something other than 0, it adds them to 8:12:28. I've been wondering if this has something to do with leap seconds or other cumulative clock changes. Or is this entirely the wrong approach to use on iOS?

Read the article

Crystal Reports .Net Guidance

- by Ken Ray

We have been using .Net and Visual Studio for the last six years, and early on developed a number of web based reporting applications using the .Net version of Crystal Reports that was bundled with Visual Studio. My overall opinion of that product has been, to say the least, rather unimpressed. It seemed to be incredibly difficult and convoluted to use, we had to make security changes, install various extra software, and so on. Now, we are moving to VS2008 and version 3.5 of the .Net framework, and the time has come to redevelop some of these old applications. The developers who used (and somehow mastered) Crystal .Net have long gone, and I am facing a decision - do we stick with Crystal Reports or move to something else. We also have the "full" version of Crystal Reports XI at our disposal. The way we use the product is to product pdf versions of data extracted from various databases. While some apps use the inbuilt Crystal Reports viewer as well, this seems to be redundant now with the flexibility of grid views - but there is still the need to produce a pdf version of the data in teh grid for printing, or in Excel format to download. What is the concensus? Is Crystal Reports .Net worth persisting with, or should we work out how to use version XI? Alternatively, is there a simple and low cost way to generate pdf reports without using Crystal? What good sources of "how to" information have others found and recommend? Are there suitable books, designed for VS2008 / .Net 3.5 development that you have used and found of benefit? Thanks in advance.

Read the article

Sending email with attachments from C#, attachments arrive as Part 1.2 in Thunderbird

- by Jon

I have a C# application which emails out Excel spreadsheet reports via an Exchange 2007 server using SMTP. These arrive fine for Outlook users, but for Thunderbird and Blackberry users the attachments have been renamed as "Part 1.2". I found this article which describes the problem, but doesn't seem to give me a workaround. I don't have control of the Exchange server so can't make changes there. Is there anything I can do on the C# end? I have tried using short filenames and HTML encoding for the body but neither made a difference. My mail sending code is simply this: public static void SendMail(string recipient, string subject, string body, string attachmentFilename) { SmtpClient smtpClient = new SmtpClient(); NetworkCredential basicCredential = new NetworkCredential(MailConst.Username, MailConst.Password); MailMessage message = new MailMessage(); MailAddress fromAddress = new MailAddress(MailConst.Username); // setup up the host, increase the timeout to 5 minutes smtpClient.Host = MailConst.SmtpServer; smtpClient.UseDefaultCredentials = false; smtpClient.Credentials = basicCredential; smtpClient.Timeout = (60 * 5 * 1000); message.From = fromAddress; message.Subject = subject; message.IsBodyHtml = false; message.Body = body; message.To.Add(recipient); if (attachmentFilename != null) message.Attachments.Add(new Attachment(attachmentFilename)); smtpClient.Send(message); } Thanks for any help.

Read the article

Eclipse / Aptana File Sync Solutions

- by Brad

Our development team uses Eclipse + Aptana to do their web development work. Currently, most of them are mapping their Eclipse projects directly to the web server. I'd rather them create a local project and use that to sync to the web server project directory they are working on. The issue is that there aren't any good solutions which is just appalling given the popularity of the two. The FileSync plugin for Eclipse is only one-way. Meaning if another developer makes a change to the file on the server, another dev isn't even notified and could overwrite the change. The File Transfer option in Aptana 2.0 doesn't support any sort of Sync, just manually uploading/downloading files. The Sync option in Aptana 1.5.1 doesn't allow you to merge files when they are different. You can only update one or the other. It does however allow you to view a diff (but only if you right click and select) and in that diff you can't make any changes. I did find a way to allow files to be uploaded to their Sync repositories in Aptana using Eclipse Monkey. However it doesn't work if a user saves multiple files at once, 'Save All', again it doesn't work. And additionally, there is no notification if a user opens a local file that has an updated copy on the server. I tried to add one using Eclipse Monkey but I couldn't find any sort of listener in the Eclipse API to do it and any Eclipse Monkey documentation is far and few between. My only solution at this point is just to let them continue to map directly to the server or ask them to do a manual download before they do any work (but again what if someone uploads a change right after they do that). Anyone have any ideas?

Read the article

Accessing a com object's vtable in c#

- by Martin Booth

I'm attempting to access a com object's vtable in memory and getting nowhere. From what I have read, the first 4 bytes in memory of a com object should be a pointer to the vtableptr, which in turn is a pointer to the vtable. Although I'm not sure I expect to find my test method at slot 7 in this com object I have tried them all and nothing looks like the address of my function. If anyone can make the necessary changes to this sample to get it to work (the aim is just to try and invoke the Test method on the Tester class by accessing the com object's vtable and locating the method in whichever row it turns up) I would be very grateful. I know it is rare that anyone would need to do this, but please accept I do need to do something quite similar and have considered the alternatives Thanks in advance [ComVisible(true)] public class Tester { public void Test() { MessageBox.Show("Here"); } } public delegate void TestDelegate(); private void main() { Tester t = new Tester(); GCHandle objectHandle = GCHandle.Alloc(t); IntPtr objectPtr = GCHandle.ToIntPtr(objectHandle); IntPtr vTable = (IntPtr)Marshal.ReadInt32(objectPtr); IntPtr vTablePtr = (IntPtr)Marshal.ReadInt32(vTable); IntPtr functionPtr = (IntPtr)Marshal.ReadInt32(vTablePtr, 7 * 4); // 7 may be incorrect but i have tried many different values TestDelegate func = (TestDelegate)Marshal.GetDelegateForFunctionPointer(functionPtr, typeof(TestDelegate)); func(); objectHandle.Free(); }

Read the article

Help matching fields between two classes

- by Michael

I'm not too experienced with Java yet, and I'm hoping someone can steer me in the right direction because right now I feel like I'm just beating my head against a wall... The first class is called MeasuredParams, and it's got 40+ numeric fields (height, weight, waistSize, wristSize - some int, but mostly double). The second class is a statistical classifier called Classifier. It's been trained on a subset of the MeasuredParams fields. The names of the fields that the Classifier has been trained on is stored, in order, in an array called reqdFields. What I need to do is load a new array, toClassify, with the values stored in the fields from MeasuredParams that match the field list (including order) found in reqdFields. I can make any changes necessary to the MeasuredParams class, but I'm stuck with Classifier as it is. My brute-force approach was to get rid of the fields in MeasuredParams and use an arrayList instead, and store the field names in an Enum object to act as an index pointer. Then loop through the reqdFields list, one element at a time, and find the matching name in the Enum object to find the correct position in the arrayList. Load the value stored at that positon into toClassify, and then continue on to the next element in reqdFields. I'm not sure how exactly I would search through the Enum object - it would be a lot easier if the field names were stored in a second arrayList. But then the index positions between the two would have to stay matched, and I'm back to using an Enum. I think. I've been running around in circles all afternoon, and I keep thinking there must be an easier way of doing it. I'm just stuck right now and can't see past what I've started. Any help would be GREATLY appreciated. Thanks so much! Michael

Read the article

C++ thread safety - exchange data between worker and controller

- by peterchen

I still feel a bit unsafe about the topic and hope you folks can help me - For passing data (configuration or results) between a worker thread polling something and a controlling thread interested in the most recent data, I've ended up using more or less the following pattern repeatedly: Mutex m; tData * stage; // temporary, accessed concurrently // send data, gives up ownership, receives old stage if any tData * Send(tData * newData) { ScopedLock lock(m); swap(newData, stage); return newData; } // receiving thread fetches latest data here tData * Fetch(tData * prev) { ScopedLock lock(m); if (stage != 0) { // ... release prev prev = stage; stage = 0; } return prev; // now current } Note: This is not supposed to be a full producer-consumer queue, only the msot recent data is relevant. Also, I've skimmed ressource management somewhat here. When necessary I'm using two such stages: one to send config changes to the worker, and for sending back results. Now, my questions assuming that ScopedLock implements a full memory barrier: do stage and/or workerData need to be volatile? is volatile necessary for tData members? can I use smart pointers instead of the raw pointers - say boost::shared_ptr? Anything else that can go wrong? I am basically trying to avoid "volatile infection" spreading into tData, and minimize lock contention (a lock free implementation seems possible, too). However, I'm not sure if this is the easiest solution. ScopedLock acts as a full memory barrier. Since all this is more or less platform dependent, let's say Visual C++ x86 or x64, though differences/notes for other platforms are welcome, too. (a prelimenary "thanks but" for recommending libraries such as Intel TBB - I am trying to understand the platform issues here)

Read the article

Has the recent version of subversion dealt with "Access Denied" errors from windows services that mo

- by Eric LaForce

Does anyone know if this subversion "bug" has been dealt with? https://svn.apache.org/repos/asf/subversion/tags/1.6.9/www/faq.html#windows-access-denied I'm getting occasional "Access Denied" errors on Windows. They seem to happen at random. Why? These appear to be due to the various Windows services that monitor the filesystem for changes (anti-virus software, indexing services, the COM+ Event Notification Service). This is not really a bug in Subversion, which makes it difficult for us to fix. A summary of the current state of the investigation is available here. A workaround that should reduce the incidence rate for most people was implemented in revision 7598; if you have an earlier version, please update to the latest release. Currently I am experiencing this same behavior in version 1.5.6 when I try and do a SVN switch (I have suspected McAfee as the culprit for a while and when I saw this I feel it validates my suspicions). I read through the link given but it seems pretty old, so I didn't know if this FAQ was just outdated and the issue has actually be resolved. Thanks for any help. Configuration: SVN 1.5.6 TortoiseSVN 1.5.9 Build 15518 Windows XP SP3 32-bit

Read the article

How do I manage application configuration in ASP.NET?

- by GlennS

I am having difficulty with managing configuration of an ASP.Net application to deploy for different clients. The sheer volume of different settings which need twiddling takes up large amounts of time, and the current configuration methods are too complicated to enable us to push this responsibility out to support partners. Any suggestions for better methods to handle this or good sources of information to research? How we do things at present: Various xml configuration files which are referenced in Web.Config, for example an AppSettings.xml. Configurations for specific sites are kept in duplicate configuration files. Text files containing lists of data specific to the site In some cases, manual one-off changes to the database C# configuration for Windsor IOC. The specific issues we are having: Different sites with different features enabled, different external services we have to talk to and different business rules. Different deployment types (live, test, training) Configuration keys change across versions (get added, remove), meaning we have to update all the duplicate files We still need to be able to alter keys while the application is running Our current thoughts on how we might approach this are: Move the configuration into dynamically compiled code (possibly Boo, Binsor or JavaScript) Have some form of diffing/merging configuration: combine a default config with a live/test/training config and a site-specific config

Read the article

Javascript add a PHP file.

- by Jordan Pagaduan

Read the article

Can GWT image sprites using ImageBundle be made to work in IE7 and IE6?

- by aem

I'm trying to use a ClientBundle in my GWT application to make multiple images get sent as a single file. I declare the bundle like so: public interface MyResources extends ClientBundle { public static final MyResources INSTANCE = GWT.create(MyResources.class); @Source("icon1.png") ImageResource icon1(); @Source("icon2.png") ImageResource icon2(); } This works great in Firefox and IE8, but in IE7 (and earlier) the whole sprite shows up in place of one of my original images - that is, icon1 is next to icon2 next to icon3, and so on. In IE8's developer tools using IE8-as-IE7 mode or Compatibility View, I can see that it's showing an image with a file name like 26BEFD2399A92A5DDA54277BA550C75B.cache.png, which is what I'd expect. So is there any way to make GWT image sprites work in IE7 and lower? If not, is there any way to gracefully degrade so users of other browsers get the speedup of spriting and IE7 and IE6 users get something that looks right but is slower? Edit: The Client Bundle Developer's Guide has a discussion of using ClientBundle and @sprite, and says "Support for IE6 isn't feasible in this format, because structural changes to the DOM are necessary to implement a "windowing" effect. Once it's possible to distinguish ie6 and ie7 in user.agent, we could revisit support for ie6. In the current implementation, the ie6 code won't render correctly, although is a purely cosmetic issue." Is this what's going on in my case, and is there a way to work around it? Showing all the images is "purely a cosmetic issue", but it's a pretty severe one.

Read the article

What is the fastest way to pull a few element values out of XML files in Perl?

- by Anon Guy

I have a bunch of XML files that are about 1-2 megabytes in size. Actually, more than a bunch, there are millions. They're all well-formed and many are even validated against their schema (confirmed with libxml2). All were created by the same app, so they're in a consistent format (though this could theoretically change in the future). I want to check the values of one element in each file from within a Perl script. Speed is important (I'd like to take less than a second per file) and as noted I already know the files are well-formed. I am sorely tempted to simply 'open' the files in Perl and scan through until I see the element I am looking for, grab the value (which is near the start of the file), and close the file. On the other hand, I could use an XML parser (which might protect me from future changes to the XML formatting) but I suspect it will be slower than I'd like. Can anyone recommend an appropriate approach and/or parser? Thanks in advance.

Read the article

WPF RibbonTextBox Width problem

- by morsanu

Hey guys, It seems to me that the Ribbon control has a problem with textboxes. I was expecting a common TextBox control behaviour: a fixed width and a visible caret when the text exceeds the width. But the RibbonTextBox control changes its width and when the text exceeds the right limit, the overflow is not visible. I found a hack on a blog that does something like this: var img = SearchButton.Template.FindName("image", SearchButton); if (img != null && img is Image) (img as Image).Visibility = Visibility.Collapsed; var lbl = FindTemplateControl<Label>(SearchText); var border = SearchText.Template.FindName("Bd", SearchText); if (border != null && border is Border && img != null && lbl != null) { (border as Border).Width = SearchText.ActualWidth - (((Image)img).ActualWidth + lbl.ActualWidth); } but I reallly don't want to do such a workaround. Is there any other simpler way to achieve simple TextBox behaviour?

Read the article

Javascript: Controlling the order that event handlers / listeners are exeucted in

- by LRE

Once again the IE Monster has hit me with an odd problem. I'm writing some changes into an asp.net site I inherited a while back. One of the problems is that in some pages there are several controls that add javascript functions as handlers to the onload event (using YUI if that matters). Some of those event handlers assume certain other functions have been executed. This is well and good in Firefox and IE7 as the handlers seem to execute in order of registration. IE8 on the other hand does this backwards. I could go with some kind of double-checking approach but given the controls are present in several pages I feel that'd create even more dependencies. So I've started cooking up my own queue class that I push the functions to and can control their execution order. Then I'll register an onload handler that instructs the queue to execute in my preferred order. I'm part way through that and have started wondering 2 things: Am I going OTT? Am I reinventing the wheel? Anyone have any insights? Any clean solutions that allow me to easily enforce execution order?

Read the article

JFreeChart - change SeriesStroke of chart lines from solid to dashed in one line

- by MisterMichaelK

The answer accepted here (JFreechart(Java) - How to draw lines that is partially dashed lines and partially solid lines?) helped me start down the path of changing my seriesstroke lines on my chart. After stepping through my code and watching the changes, I see that my seriesstroke does in fact change to "dashedStroke" when it is supposed to (after a certain date "dai"), but when the chart is rendered the entire series line is dashed. How can I get a series line to be drawn solid at first and dashed after a set date? /* series line modifications */ final Number dashedAfter = timeNowDate.getTime(); final int dai = Integer.parseInt(ndf.format(timeNowDate)); XYLineAndShapeRenderer render = new XYLineAndShapeRenderer() { Stroke regularStroke = new BasicStroke(); Stroke dashedStroke = new BasicStroke( 1.0f, BasicStroke.CAP_ROUND, BasicStroke.JOIN_ROUND, 1.0f, new float[] {10.0f, 6.0f}, 0.0f ); @Override public Stroke getItemStroke(int row, int column) { Number xVal = cd.getXValue(row, column); int xiv = xVal.intValue(); if (xVal.doubleValue() > dashedAfter.doubleValue()) { return dashedStroke; } else { return regularStroke; } } }; plot.setRenderer(render);

Read the article

jquery loop to create elements with retained values

- by Andy Simpson

Dear all, I recently asked a question about creating elements with jquery. Specifically I needed input boxes created/deleted depending on the value of a particular select box. This was answered quickly with a very nice solution as follows: $('select').change(function() { var num = parseInt($(this).val(), 10); var container = $('<div />'); for(var i = 1; i <= num; i++) { container.append('<input id="id'+i+'" name="name'+i+'" />'); } $('somewhere').html(container); }); This works very well. Is there a way to have the values remaining in the text boxes when the selection is changed? For example, lets say the select element value is set to '2' so that there are 2 input boxes showing. If there is input already entered in these boxes and the user changes the select element value to '3' is there a way to get the first 2 input boxes to retain their value? Thanks for the help in advance Andy

Read the article

Visual studio not detecting that exe is out of date after perforce revert

- by CHaskell2

This is a bit of an odd situation. Here's what's happening. So, we have a VS2008 project which outputs to a number of files under perforce control. These files have the always writable flag set. I compile the project in VS, which gives me up to date binaries on my machine. If I then revert those binaries via perforce, I have the version of the binaries that were up on perforce (ie, old ones.) Despite this, compiling the project again at this point detects no changes and will not remake those binaries. In a way, this makes sense, since none of the code or obj files have changed, but it's not really what I want to happen. This comes up in an edge case on our automated build server. I can think of tons of different little hacks I could do to fix this, but I'm thinking I could be missing something fundamental here. The actual build process uses the Unreal build tool, so there is a bit of magic going on behind the scenes that I'm not entirely familiar with too. Edit: This is a C/C++ project, forgot to mention that.

Read the article

asp.net mvc formcollection

- by mazhar

public ActionResult Edit(int id, FormCollection formValues) { 07. 08. // Retrieve existing dinner 09. Dinner dinner = dinnerRepository.GetDinner(id); 10. 11. // Update dinner with form posted values 12. dinner.Title = Request.Form["Title"]; 13. dinner.Description = Request.Form["Description"]; 14. dinner.EventDate = DateTime.Parse(Request.Form["EventDate"]); 15. dinner.Address = Request.Form["Address"]; 16. dinner.Country = Request.Form["Country"]; 17. dinner.ContactPhone = Request.Form["ContactPhone"]; 18. 19. // Persist changes back to database 20. dinnerRepository.Save(); 21. 22. // Perform HTTP redirect to details page for the saved Dinner 23. return RedirectToAction("Details", new { id = dinner.DinnerID }); 24.} formValues is not used in any form, what is the used of it.

Read the article

JSON: Jackson stream parser - is it really worth it?

- by synic

I'm making pretty heavy use of JSON parsing in an app I'm writing. Most of what I have done is already implemented using Android's built in JSONObject library (is it json-lib?). JSONObject appears to create instances of absolutely everything in the JSON string... even if I don't end up using all of them. My app currently runs pretty well, even on a G1. My question is this: are the speed and memory benefits from using a stream parser like Jackson worth all the trouble? By trouble, I mean this: As far as I can tell, there are three downsides to using Jackson instead of the built in library: Dependency on an external library. This makes your .apk bigger in the end. Not a huge deal. Your app is more fragile. Since the parsing is not done automatically, it is more vulnerable to changes in the JSON text that it's parsing. I'm extremely worried that malformed JSON will result in infinite loops (as pull parsing requires a lot of while loops). Writing code to parse JSON via a stream parser is ugly and tedious.

Read the article

Sysdeo Tomcat DevLoader - Hot deploy of java class causes whole application to restart

- by Gala101

Hi, I am using sysdeo tomcat plugin 3.2.1 with eclipse 3.5.1 (Galileo) and tomcat 5.5.23 on windows XP. I can get tomcat plugin working in eclipse, and have extracted devloader.zip into [tomcat]\server\classes. I have also updated the context and now it has this entry: <Context path="/myapp1" reloadable="true" docBase="F:\Work\eclipse_workspace\myapp1" workDir="F:\Work\eclipse_workspace\myapp1\work" > <Logger className="org.apache.catalina.logger.SystemOutLogger" verbosity="4" timestamp="true"/> <Loader className="org.apache.catalina.loader.DevLoader" reloadable="true" debug="1" useSystemClassLoaderAsParent="false" /> </Context> I have activated devloader (in Project Properties Tomcat Devloader Classpath) and have 'checked' all my classes and jars, I haven't 'checked' commons-loggin.jar jsp-api.jar, servlet-api.jar. So on launching tomcat via the plugin, I can get it running with devloader as shown in eclipse console view [DevLoader] Starting DevLoader [DevLoader] projectdir=F:\Work\eclipse_workspace\myapp1 [DevLoader] added file:/F:/Work/eclipse_workspace/myapp1/WEB-INF/classes/ [DevLoader] added file:/F:/Work/eclipse_workspace/myapp1/WEB-INF/lib/activation.jar However, if I even add a single System.out.println into any java file and save it, the whole application gets reloaded (takes ~80 sec) which is as good as stopping/starting tomcat itself. I've tried adding -Xdebug in JAVA_OPTS in the catalina.bat but no luck :( Can you please guide where I may be doing it wrong.. Please note that I can 'redeploy' the whole application on tomcat but that's not what I need, I am looking to be able to make small changes in java classes 'on-the-fly' while coding/debugging without having to wait for complete app restart. Another annoyance is that restarting tomcat/application causes the session/debug progress to be lost.. Can you please guide me how to go about it. PS: I am not using any ant/maven scripts explicitly, just relying on eclipse to do the build for me (which it does).

Search Results

Search found 15129 results on 606 pages for 'orientation changes'.

Page 483/606 | < Previous Page | 479 480 481 482 483 484 485 486 487 488 489 490 | Next Page >

- by rob - not a robber

- by dwidel

- by zurna

- by Zarjay

- by Thomas

- by Steven Fisher

- by Ken Ray

- by Jon

- by Brad

- by Martin Booth

- by Michael

- by peterchen

- by Eric LaForce

- by GlennS

- by Jordan Pagaduan

- by aem

- by Anon Guy

- by morsanu

- by LRE

- by MisterMichaelK

- by Andy Simpson

- by CHaskell2

- by mazhar

- by synic

- by Gala101

< Previous Page | 479 480 481 482 483 484 485 486 487 488 489 490 | Next Page >