Search Results

Search found 21907 results on 877 pages for 'virtual box'.

Page 483/877 | < Previous Page | 479 480 481 482 483 484 485 486 487 488 489 490  | Next Page >

• How do I turn a router into a wireless bridge

  - by Rob Cowell

  I'm trying to get my HD satellite receiver connected to the internet - it has an Ethernet port on the back but my networking equipment is all upstairs. I had the idea of connecting a spare wireless router to the box with an ethernet cable and getting that wireless router to talk to my "main" wireless router (the one with the ADSL connection) to supply internet access. I believe this entails getting the router to work as a "wireless bridge", but I don't know how to do this. Currently, the ADSL line is hooked up to a NETGEAR DG834G. The other two "spare" wireless routers I have to act as the bridge are :- Huawei HG520b Netgear DGN2000 BT Homehub I'd prefer not to change the "main" router (cos I'm used to its web admin UI) - does anyone know a way I can achieve the connectivity I require with the equipment I have?

  Read the article

• How do I turn a router into a wireless bridge

  - by Rob Cowell

  I'm trying to get my HD satellite receiver connected to the internet - it has an Ethernet port on the back but my networking equipment is all upstairs. I had the idea of connecting a spare wireless router to the box with an ethernet cable and getting that wireless router to talk to my "main" wireless router (the one with the ADSL connection) to supply internet access. I believe this entails getting the router to work as a "wireless bridge", but I don't know how to do this. Currently, the ADSL line is hooked up to a NETGEAR DG834G. The other two "spare" wireless routers I have to act as the bridge are :- Huawei HG520b Netgear DGN2000 BT Homehub I'd prefer not to change the "main" router (cos I'm used to its web admin UI) - does anyone know a way I can achieve the connectivity I require with the equipment I have?

  Read the article

• "You need to confirm this operation" message when trying to delete a file

  - by Richard West

  I'm trying to delete a few files that I created, and I have full permissions on, on a Windows 2008 system. The files are within a folder that I created so they are not system files of any kind. The message box that pops up when I try to delete the file is titled "Destination Folder Access Denied", and the message is "you need to confirm this operation", with a continue, skip or cancel button. I disabled UAC and rebooted to see if this would make the message go away -- it did not. However, with UAC disabled I am able to click on continue and the files are deleted. With UAC enabled I had to provide elevated credientials before the files would delete. What causes this behaviour and how can I remove it?

  Read the article

• Which tools should I use to work efficiently on a remote server?

  - by Konstantin

  I rented a virtual ubuntu server and am trying to setup a web application. I am working from ubuntu. I know how to use the command line, but it is slow and as a visual person, I prefer graphical interfaces. So I connected with nautilus via ssh and was now able to browse the directories graphically. But my permissions are just those of "other", so I cannot do much without o+rwx. What tools do you use to do setup and administrate your servers? Should I write code locally rather then directly on the server and rsync it? EDIT: It is NOT a production server, I am simply fiddling around there.

  Read the article

• how to bypass internal DNS?

  - by fabjoa

  This is about Ubuntu but should be pretty much the same on all Linux flavors. Let's say I add an entry to my /etc/hosts such as 127.0.1.12 facebook.com and an Apache virtual host such as <VirtualHost 127.0.1.12> ServerName facebook.com DocumentRoot /var/www </VirtualHost> when i open my browser and send a GET request to facebook.com, firefox will browse my /var/www folder. Question: How could I fetch (ie, using wget in bash) the real facebook.com domain - without erasing the entry in /etc/hosts nor my Apache VirtualHost -- IOW how could I bypass internal DNS?

  Read the article

• Build NAS for Windows and Linux network

  - by modernzombie

  I have a spare PC and I would like to setup a NAS that is accessible from Windows and Linux. I would like to avoid using Windows as an OS and would like something like Ubuntu or FreeNAS. My only concern is I don't want to have to install special software on each client. Is there a way to use Ubuntu or FreeNAS and have Windows machines access the files with installing a client on each Windows box? UPDATE Thanks for the answers. I wish I could choose more than one. I will give FreeNAS a try and see how it goes. Thanks!

  Read the article

• Apache2 Service started twice

  - by Relentless

  My apache2 web-server starts twice and wont bind, so i have to do this: sudo netstat -nap | grep 0.0.0.0:443 sudo kill -9 1243 sudo /etc/init.d/apache2 restart Is there any way i can make a script out of the code above so that i can run automatically on start up? I have Ubuntu 10.04, this happened after an update. UPDATE: ports.conf - Could this be cause it: <IfModule mod_ssl.c> # If you add NameVirtualHost *:443 here, you will also have to change # the VirtualHost statement in /etc/apache2/sites-available/default-ssl # to <VirtualHost *:443> # Server Name Indication for SSL named virtual hosts is currently not # supported by MSIE on Windows XP. Listen 443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule> could it be listening to 443 twice? or do i need to add NameVirtualHost *:443

  Read the article

• IIS7 returns 403.1 (execute access denied) for image file

  - by Kristoffer

  I have a web app running in IIS7 on Windows Server 2008. There is a virtual directory pointing to a shared folder "/Content/Data" on another machine (running Windows Server 2003), as well as a real directory "/Content/Images" on the local machine (web app sub folder). Accessing images in "/Content/Images" is no problem, but when an image (e.g. a JPEG file) in the "/Content/Data" is accessed by a browser, IIS returns this error: HTTP Error 403.1 - Forbidden: Execute access is denied. However, the web app can read and write to / from it. I assume IIS and ASP.NET are running under different user accounts? Does anyone have an idea on what I have to do to make it work? I have set the permissions on the shared folder to Everyone Full Control, with no luck.

  Read the article

• Host name resolution on a home network

  - by Kris

  Hi, I have several machines (both virtual and physical) in my internal network at home. Currently I have to connect via 1P addresses. The one main machine I connect with to all the other machines is running Windows Vista. Is there a way I can have some sort of DNS capability inside my network as well so I can refer to these machines with a name? I think this would be a common problem in most households (running a few computers) and I think there might be some simple solutions out there. This would be something most routers should support out of the box - but why don't they? Can anyone recommend some of these or an easy way to accomplish this?

  Read the article

• Host name resolution on a home network

  - by Kris

  Hi, I have several machines (both virtual and physical) in my internal network at home. Currently I have to connect via 1P addresses. The one main machine I connect with to all the other machines is running Windows Vista. Is there a way I can have some sort of DNS capability inside my network as well so I can refer to these machines with a name? I think this would be a common problem in most households (running a few computers) and I think there might be some simple solutions out there. This would be something most routers should support out of the box - but why don't they? Can anyone recommend some of these or an easy way to accomplish this?

  Read the article

• Exchange Public Folders in Snow Leopard Mail.app

  - by Paul

  I am using Mail.app (running snow leopard) to connect to my email account on my school's Exchange 2007 server. I get my Inbox just fine, and iCal connects to my Outlook Calendar just fine, but I cannot seem to get any of the Exchange Public Folders that I can automatically see when I am using Outlook on a Windows box. The Account Type is shown as "Exchange 2007" I did not have any luck Googling this problem, in fact most of the results I saw were dealing with the opposite problem: Remove MS Exchange Public Folders I am aware that my question is a duplicate of this: http://superuser.com/questions/103115/apple-mail-app-all-exchange-folders-not-visible but since that question did not get any responses, I am reposting.

  Read the article

• How to troubleshoot a GPF?

  - by AngryHacker

  I get a GPF dialog box out of the blue fairly often (like about 2 hours after I turn on the computer). It basically says that svchost.exe had a failure... (see the corresponding Event Log entry below). Event Type: Error Event Source: Application Error Event Category: (100) Event ID: 1000 Date: 5/18/2010 Time: 7:41:16 PM User: N/A Computer: DKHA-IPSA Description: Faulting application svchost.exe, version 5.1.2600.5512, faulting module ole32.dll, version 5.1.2600.5512, fault address 0x0004eaa9. Shortly after this error pops up, the computer pretty much grinds to a halt (e.g. some UI elements on the desktop simply do not respond). And I have to do a hard reboot. How do I troubleshoot this type of thing? P.S. The PC has all the latest patches and nothing is missing in the Device Manager.

  Read the article

• Requiring SSH-key Login Via PAM From Specific IP Ranges

  - by Sean M

  I need to be able to access my server (Ubuntu 8.04 LTS) from remote sites, but I'd like to worry a bit less about password complexity. Thus, I'd like to require that SSH keys be used for login instead of name/password. However, I still have a lot to learn about security, and having already badly broken a test box when I was trying to set this up, I'm acutely aware of the chance of screwing myself while trying to accomplish this. So I have a second goal: I'd like to require that certain IP ranges (e.g. 10.0.0.0/8) may log in with name/password, but everyone else must use an SSH key to log in. How can I satisfy both of these goals? There already exists a very similar question here, but I can't quite figure out how to get to what I want from that information. Current tactic: reading through the PAM documentation (pam_access looks promising) and looking at /etc/ssh/sshd_config.

  Read the article

• Linux networking "jail" for a single process

  - by halp

  I need to tune up a networking app for network specific things like: make it use a DNS server different than the default one from /etc/resolv.conf make sure it does not try to connect to certain hosts/ports using tcp/udp connections I know I can get away with just modifying /etc/resolv.conf and writing some iptables rules, but going for a default DENY firewall policy for outgoing IP packets can trigger malfunctions in other services running on the server. I know I can set up a virtual machine with a whole OS and run my app there, but it seems a bit overkill. Is it possible to have a networking "jail" for a single app (think single Linux process) that could accept iptables-like rules for network traffic (think in terms of IP packets and above) allowed to and from this particular app? Maybe this is achievable through some dynamically loaded library that can deal with the networking layer, the same manner tsocks does, but more fine-grained?

  Read the article

• Redirect example.com to www.example.com VPS & Apache2

  - by Thomas Buckley

  I have a VPS and a domain name registered with the provider. When I enter www.example.com my site is displayed correctly, but entering example.com does not work. I am able to ping www.example.com. I added the following line to my apache2 default vhosts file: ServerName example.com ServerAlias www.example.com But this did not work. The VPS is a Debian5 OS. Any ideas? Note: There is no option via a provided control panel to add this, it's a basic package I purchased I know this post answers it but there are no extra comments and I'd like to know if it's the best way: way to redirect page to www using virtual host configuration in sites-available for apache2? Thanks

  Read the article

• OpenIndiana (illumos): vmxnet3 interface lost on reboot

  - by protomouse

  I want my VMware vmxnet3 interface to be brought up with DHCP on boot. I can manually configure the NIC with: # ifconfig vmxnet3s0 plumb # ipadm create-addr -T dhcp vmxnet3s0/v4dhcp But after creating /etc/dhcp.vmxnet3s0 and rebooting, the interface is down and the logs show: Aug 13 09:34:15 neumann vmxnet3s: [ID 654879 kern.notice] vmxnet3s:0: getcapab(0x200000) -> no Aug 13 09:34:15 neumann vmxnet3s: [ID 715698 kern.notice] vmxnet3s:0: stop() Aug 13 09:34:17 neumann vmxnet3s: [ID 654879 kern.notice] vmxnet3s:0: getcapab(0x200000) -> no Aug 13 09:34:17 neumann vmxnet3s: [ID 920500 kern.notice] vmxnet3s:0: start() Aug 13 09:34:17 neumann vmxnet3s: [ID 778983 kern.notice] vmxnet3s:0: getprop(TxRingSize) -> 256 Aug 13 09:34:17 neumann vmxnet3s: [ID 778983 kern.notice] vmxnet3s:0: getprop(RxRingSize) -> 256 Aug 13 09:34:17 neumann vmxnet3s: [ID 778983 kern.notice] vmxnet3s:0: getprop(RxBufPoolLimit) -> 512 Aug 13 09:34:17 neumann nwamd[491]: [ID 605049 daemon.error] 1: nwamd_set_unset_link_properties: dladm_set_linkprop failed: operation not supported Aug 13 09:34:17 neumann vmxnet3s: [ID 654879 kern.notice] vmxnet3s:0: getcapab(0x20000) -> no Aug 13 09:34:17 neumann nwamd[491]: [ID 751932 daemon.error] 1: nwamd_down_interface: ipadm_delete_addr failed on vmxnet3s0: Object not found Aug 13 09:34:17 neumann nwamd[491]: [ID 819019 daemon.error] 1: nwamd_plumb_unplumb_interface: plumb IPv4 failed for vmxnet3s0: Operation not supported on disabled object Aug 13 09:34:17 neumann nwamd[491]: [ID 160156 daemon.error] 1: nwamd_plumb_unplumb_interface: plumb IPv6 failed for vmxnet3s0: Operation not supported on disabled object Aug 13 09:34:17 neumann nwamd[491]: [ID 771489 daemon.error] 1: add_ip_address: ipadm_create_addr failed on vmxnet3s0: Operation not supported on disabled object Aug 13 09:34:17 neumann nwamd[491]: [ID 405346 daemon.error] 9: start_dhcp: ipadm_create_addr failed for vmxnet3s0: Operation not supported on disabled object I then tried disabling network/physical:nwam in favour of network/physical:default. This works, the interface is brought up but physical:default fails and my network services (e.g. NFS) refuse to start. # ifconfig -a lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 vmxnet3s0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:1: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:2: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:3: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:4: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:5: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:6: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:7: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:8: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1 inet6 ::1/128 vmxnet3s0: flags=20002000840<RUNNING,MULTICAST,IPv6> mtu 9000 index 2 inet6 ::/0 # cat /var/svc/log/network-physical\:default.log [ Aug 16 09:46:39 Enabled. ] [ Aug 16 09:46:41 Executing start method ("/lib/svc/method/net-physical"). ] [ Aug 16 09:46:41 Timeout override by svc.startd. Using infinite timeout. ] starting DHCP on primary interface vmxnet3s0 ifconfig: vmxnet3s0: DHCP is already running [ Aug 16 09:46:43 Method "start" exited with status 96. ] NFS server not running: # svcs -xv network/nfs/server svc:/network/nfs/server:default (NFS server) State: offline since August 16, 2012 09:46:40 AM UTC Reason: Service svc:/network/physical:default is not running because a method failed. See: http://illumos.org/msg/SMF-8000-GE Path: svc:/network/nfs/server:default svc:/milestone/network:default svc:/network/physical:default Reason: Service svc:/network/physical:nwam is disabled. See: http://illumos.org/msg/SMF-8000-GE Path: svc:/network/nfs/server:default svc:/milestone/network:default svc:/network/physical:nwam Reason: Service svc:/network/nfs/nlockmgr:default is disabled. See: http://illumos.org/msg/SMF-8000-GE Path: svc:/network/nfs/server:default svc:/network/nfs/nlockmgr:default See: man -M /usr/share/man -s 1M nfsd Impact: This service is not running. I'm new to the world of Solaris, so any help solving would be much appreciated. Thanks!

  Read the article

• Multiple VLANs, multiple subnets, single DHCP server?

  - by EightQuarterBit

  Hey guys! At my job we are prepping to transition from multiple LANs connected over slow VPN connections to a single MAN connected over fiber, and I've got a few questions. First of all, we are planning on making each physical site its own VLAN, but we would like to have a single DHCP server at the data center hand out IPs to each VLAN. We've pretty much got the VLAN tagging structure all worked out, but we would like to have our single DHCP server assign different subnets of IPs to each VLAN. For instance, VLAN 2 gets 10.0.2.x through 10.0.4.x, VLAN 3 gets 10.0.5.x through 10.0.7.x etc. We are an Active Directory based shop and we have a Server 2003 box handling DHCP (though we aren't averse to upgrading it to server 2008.) Is this feasible, or am I pipe-dreaming?

  Read the article

• How to create a very simple external FastCGI configuration in apache?

  - by Thiado de Arruda

  I have an externally started FastCGI application that listens on socket '/tmp/foo.sock' and a directory of static files in '/srv/static'. Apache has all needed permissions on the socket and the directories. What I need : All requests starting with '/static' should be handled by apache using the contents of '/srv/static'. All other requests should be handled by the FastCGI application. Here is my current virtual host configuration: <VirtualHost *:80> ServerAdmin [email protected] ServerName www.foo.com ServerAlias foo.com Alias /static /srv/static FastCgiExternalServer /* -socket /tmp/foo.sock ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined </VirtualHost> Even though this seems simple, its giving me quite the headache. According to http://www.fastcgi.com/mod_fastcgi/docs/mod_fastcgi.html#FastCgiExternalServer the first parameter to 'FastCgiExternalServer' should be a 'filename' that when matched will cause apache to delegate the request to the external FastCGI app. What am I missing here?

  Read the article

• Unable to connect to Github for the first time

  - by MaxMackie

  This is my first time with Git and I'm trying to set it up on my box. I added my key to my profile in the Github web interface. When I try to connect... : max@linux-vwzy:~> ssh [email protected] The authenticity of host 'github.com (207.97.227.239)' can't be established. RSA key fingerprint is xx Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added 'github.com,207.97.227.239' (RSA) to the list of known hosts. PTY allocation request failed on channel 0 max@linux-vwzy:~> ssh-add ~/.ssh/id_rsa Identity added: /home/max/.ssh/id_rsa (/home/max/.ssh/id_rsa) max@linux-vwzy:~> ssh [email protected] PTY allocation request failed on channel 0 I'm supposed to be getting some kind of welcome message however, I'm not.

  Read the article

• Apache 2.4.3 php-fpm mod_fast_cgi and mod_cache

  - by Anjia

  Did anybody successfully configured mod_cache in apache 2.4 with php-fpm and fastcgi? my cgi config: <IfModule mod_fastcgi.c> Alias /php5.fastcgi /var/www/fastcgi/php5.fastcgi AddHandler php-script .php FastCGIExternalServer /var/www/fastcgi/php5.fastcgi -socket /mnt/tmp/fast/php-fpm.sock -idle-timeout 1600 -pass-header Authorization Action php-script /php5.fastcgi virtual My php-fpm config is standard and I am loading mod_cache and mod_disk_cache in Apache. However the Apache does not seems to cache any content. The debug log file: Fri Sep 07 23:22:59.691333 2012] [cache:debug] [pid 35623:tid 123613201929984] mod_cache.c(161): [client 10.0.0.22:21938] AH00750: Adding CACHE_SAVE filter for /index.html [Fri Sep 07 23:22:59.691345 2012] [cache:debug] [pid 35623:tid 123613201929984] mod_cache.c(171): [client 10.0.0.22:21938] AH00751: Adding CACHE_REMOVE_URL filter for /index.html [Fri Sep 07 23:23:01.326598 2012] [cache:debug] [pid 35623:tid 123613185144576] cache_storage.c(626): [client 10.0.0.110:5414] AH00698: cache: Key for entity /index.html?(null) is `http://10.0.1.16:8080/index.html?`

  Read the article

• Bluehost: 1 Minute Delays?

  - by feklee

  On Bluehost shared hosting (Apache 2.2 + FastCGI + APC), I have the problem that some requests take almost exactly one minute to respond. Yet time spent in PHP is only two seconds. To demonstrate the issue, I created a temporary test page. Sample output: When asking Bluehost support about the issue, I got the following reply: “the fastcgi process don't stay running they will only stay running for a certan period which would explain the timeouts you are seeing it traffic would spawn new ones. [...]” I understand that spawning new FastCGI processes takes some time. But almost exactly one minute? That must be some timeout. But which timeout may that be? What I want in the end: No request should take longer than five seconds to respond, even if it fails. When I asked Bluehost support to set the Apache TimeOut directive accordingly, they told me: “we do not modify the Apache Config File even on a virtual host level.”

  Read the article

• USB MFP print server that works with Windows x64?

  - by hangy

  Right now, we are using the Longshine LCS-MFP101-2 to connect to our MFP device (printer/scanner combo) over LAN. However, the required driver (RMVUSB, Remote Virtual USB) cannot be installed on 64 bit Windows operating systems such as Windows XP x64 or Windows 7 x64. Since the distributor lists the product as "phased out", I do not expect any updated 64 bit drivers any time soon. :/ Because of that, I am searching for a relatively cheap SOHO MFP print server (1 USB port should be enough) which can be used with 32 bit and 64 bit versions of Windows. Do you have any ideas or recommendations? Thanks!

  Read the article

• IMAP/POP won't send allow emails to outside- New Dell PowerEdge 7310 running SBS 2011

  - by user779887

  I have a brand new out of the box Dell PowerEdge T310 running SBS 2011. Our employees at our remote offices can't send emails to recipients outside of our own domain. The workstations at the same location as the server aren't having any problem. I would at this time like to say "Thanks a lot" to the super-minds at Microsoft for protecting our email server from rogue computers attempting to send fake emails. (Silly me I thought proper login and password conventions would handle that.) I know this is something dealing with relaying but thus far nothing from any posts I've read have changed anything. Honestly, if someone is crafty enough to guess one of our login/password combos, let them send emails through our server I don't care!

  Read the article

• Linux, some packets are not being NAT

  - by user70932

  Hi, I'm trying to NAT HTTP traffic, I'm new to this and facing some issues. What i'm trying to do is NAT client HTTP requests to a webserver. CLIENT - NAT BOX - WEBSERVER When the client open the IP of the NAT BOX, the request should be pass to the web server. But I'm getting "HTTP request sent, awaiting response..." and then wait serveral minutes before the request is done. Looking at the tcpdump output, it looks like the first Syn packet on (10:48:54) is being NAT but not the second, third, fourth... ACK or PSH packets, and wait until (10:52:04) it starts NAT again on the ACK packet. The iptables command I'm using is: iptables -t nat -A PREROUTING -p tcp -i eth0 --dport 80 \ -j DNAT --to-destination WEBSERVER I'm wondering what could have caused this behavior? Thanks alot. 10:48:54.907861 IP (tos 0x0, ttl 49, id 16395, offset 0, flags [DF], proto: TCP (6), length: 48) CLIENT.61736 > NATBOX.http: S, cksum 0x6019 (correct), 1589600740:1589600740(0) win 5840 <mss 1460,nop,wscale 8> 10:48:54.907874 IP (tos 0x0, ttl 48, id 16395, offset 0, flags [DF], proto: TCP (6), length: 48) CLIENT.61736 > WEBSERVER.http: S, cksum 0xb5d7 (correct), 1589600740:1589600740(0) win 5840 <mss 1460,nop,wscale 8> 10:48:55.102696 IP (tos 0x0, ttl 49, id 16397, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x2727 (correct), ack 2950613896 win 23 10:48:55.102963 IP (tos 0x0, ttl 49, id 16399, offset 0, flags [DF], proto: TCP (6), length: 160) CLIENT.61736 > NATBOX.http: P 0:120(120) ack 1 win 23 10:48:58.103078 IP (tos 0x0, ttl 49, id 16401, offset 0, flags [DF], proto: TCP (6), length: 160) CLIENT.61736 > NATBOX.http: P 0:120(120) ack 1 win 23 10:48:58.366344 IP (tos 0x0, ttl 49, id 16403, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x26af (correct), ack 1 win 23 10:49:04.103204 IP (tos 0x0, ttl 49, id 16405, offset 0, flags [DF], proto: TCP (6), length: 160) CLIENT.61736 > NATBOX.http: P 0:120(120) ack 1 win 23 10:49:04.363943 IP (tos 0x0, ttl 49, id 16407, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x26af (correct), ack 1 win 23 10:49:16.101583 IP (tos 0x0, ttl 49, id 16409, offset 0, flags [DF], proto: TCP (6), length: 160) CLIENT.61736 > NATBOX.http: P 0:120(120) ack 1 win 23 10:49:16.363475 IP (tos 0x0, ttl 49, id 16411, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x26af (correct), ack 1 win 23 10:49:40.100796 IP (tos 0x0, ttl 49, id 16413, offset 0, flags [DF], proto: TCP (6), length: 160) CLIENT.61736 > NATBOX.http: P 0:120(120) ack 1 win 23 10:49:40.563898 IP (tos 0x0, ttl 49, id 16415, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x26af (correct), ack 1 win 23 10:50:28.099396 IP (tos 0x0, ttl 49, id 16417, offset 0, flags [DF], proto: TCP (6), length: 160) CLIENT.61736 > NATBOX.http: P 0:120(120) ack 1 win 23 10:50:28.761678 IP (tos 0x0, ttl 49, id 16419, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x26af (correct), ack 1 win 23 10:52:04.093668 IP (tos 0x0, ttl 49, id 16421, offset 0, flags [DF], proto: TCP (6), length: 160) CLIENT.61736 > NATBOX.http: P 0:120(120) ack 1 win 23 10:52:04.093678 IP (tos 0x0, ttl 48, id 16421, offset 0, flags [DF], proto: TCP (6), length: 160) CLIENT.61736 > WEBSERVER.http: P 1589600741:1589600861(120) ack 2950613896 win 23 10:52:04.291021 IP (tos 0x0, ttl 49, id 16423, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x25d3 (correct), ack 217 win 27 10:52:04.291028 IP (tos 0x0, ttl 48, id 16423, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > WEBSERVER.http: ., cksum 0x7b91 (correct), ack 217 win 27 10:52:04.300708 IP (tos 0x0, ttl 49, id 16425, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x253c (correct), ack 368 win 27 10:52:04.300714 IP (tos 0x0, ttl 48, id 16425, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > WEBSERVER.http: ., cksum 0x7afa (correct), ack 368 win 27 10:52:04.301417 IP (tos 0x0, ttl 49, id 16427, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: F, cksum 0x253b (correct), 120:120(0) ack 368 win 27 10:52:04.301438 IP (tos 0x0, ttl 48, id 16427, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > WEBSERVER.http: F, cksum 0x7af9 (correct), 120:120(0) ack 368 win 27 10:52:04.498875 IP (tos 0x0, ttl 49, id 16429, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x253a (correct), ack 369 win 27 10:52:04.498881 IP (tos 0x0, ttl 48, id 16429, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > WEBSERVER.http: ., cksum 0x7af8 (correct), ack 369 win 27

  Read the article

• Where is Amazon Linux AMI Test Page EC2?

  - by fuzzybee

  I have set up my websites as directories directly under /var/www/html/ and they are working just fine (the websites are mapped to virtual hosts). So, this is mainly out of curiosity for the moment. Furthermore, being able to customise this might bring some benefits in the future e.g. branding the elastic IPs my computer use temporarily. Notes I can always create a index.html page under /var/www/html/ and modify it but that's not my goal here. I can also map the elastic IP address to a directory /var/www/html/default/ and do my stuffs there but that is not also my goal here My goal is the find the Amazon Linux AMI test page I've tried running Linux command to find it but it takes too long obviously

  Read the article

< Previous Page | 479 480 481 482 483 484 485 486 487 488 489 490  | Next Page >