Search Results

Search found 12887 results on 516 pages for 'hard boiled wonderland'.

Page 484/516 | < Previous Page | 480 481 482 483 484 485 486 487 488 489 490 491  | Next Page >

• Contract developer trying to get outsourcing contract with current client.

  - by Mike

  I work for a major bank as a contract software developer. I've been there a few months, and without exception this place has the worst software practices I've ever seen. The software my team makes has no formal testing, terrible code (not reusable, hard to read, etc), minimal documentation, no defined development process and an absolutely sickening amount of waste due to bureaucratic overhead. Part of my contract is to maintain a group of thousands of very poorly written batch jobs. When one of the jobs fails (read: crashes), it's a developers job to look at the source, figure out what's wrong, fix it, and check it in. There is no quality assurance process or auditing of the results whatsoever. Once the developer says "it works" a manager signs off and it goes into production. What's disturbing is that these jobs essentially grab market data and put it into a third-party risk management system, which provides the bank with critical intelligence. I've discovered the disturbing truth that this has been happening since the 90s and nobody really has evidence the system is getting the correct data! Without going into details, an issue arose on Friday that was so horrible I actually stormed out of the place. I was ready to quit, but I decided to just get out to calm my nerves and possibly go back Monday. I've been reflecting today on how to handle this. I have realized that, in probably less than 6 months, I could (with 2 other developers) remake a large component of this system. The new system would provide them with, as primary benefits, a maintainable codebase less prone to error and a solid QA framework. To do it properly I would have to be outside the bank, the internal bureaucracy is just too much. And moreover, I think a bank is fundamentally not a place that can make good software. This is my plan. Write a report explaining in depth all the problems with their current system Explain why their software practices fail and generate a tremendous amount of error and waste. Use this as the basis for claiming the project must be developed externally. Write a high level development plan, including what resources I will require Hand 1,2,3 to my manager, hopefully he passes it up the chain. Worst case he fires me, but this isn't so bad. Convinced Executive decides to award my company a contract for the new system I have 8 years experience as a software contractor and have delivered my share of successful software products, but all working in-house for small/medium sized companies. When I read this over, I think I have a dynamite plan. But since this is the first time doing something this bold so I have my doubts. My question is, is this a good idea? If you think not, please spare no detail.

  Read the article

• Using embedded resources in Silverlight (4) - other cultures not being compiled

  - by Andrei Rinea

  I am having a bit of a hard time providing localized strings for the UI in a small Silverlight 4 application. Basically I've put a folder "Resources" and placed two resource files in it : Statuses.resx Statuses.ro.resx I do have an enum Statuses : public enum Statuses { None, Working } and a convertor : public class StatusToMessage : IValueConverter { public object Convert(object value, Type targetType, object parameter, CultureInfo culture) { if (!Enum.IsDefined(typeof(Status), value)) { throw new ArgumentOutOfRangeException("value"); } var x = Statuses.None; return Statuses.ResourceManager.GetString(((Status)value).ToString(), Thread.CurrentThread.CurrentUICulture); } public object ConvertBack(object value, Type targetType, object parameter, CultureInfo culture) { throw new NotImplementedException(); } } in the view I have a textblock : <TextBlock Grid.Column="3" Text="{Binding Status, Converter={StaticResource StatusToMessage}}" /> Upon view rendering the converter is called but no matter what the Thread.CurrentThread.CurrentUICulture is set it always returns the default culture value. Upon further inspection I took apart the XAP resulted file, taken the resulted DLL file to Reflector and inspected the embedded resources. It only contains the default resource!! Going back to the two resource files I am now inspecting their properties : Build action : Embedded Resource Copy to output directory : Do not copy Custom tool : ResXFileCodeGenerator Custom tool namespace : [empty] Both resource (.resx) files have these settings. The .Designer.cs resulted files are as follows : Statuses.Designer.cs : //------------------------------------------------------------------------------ // <auto-generated> // This code was generated by a tool. // Runtime Version:4.0.30319.1 // // Changes to this file may cause incorrect behavior and will be lost if // the code is regenerated. // </auto-generated> //------------------------------------------------------------------------------ namespace SilverlightApplication5.Resources { using System; /// <summary> /// A strongly-typed resource class, for looking up localized strings, etc. /// </summary> // This class was auto-generated by the StronglyTypedResourceBuilder // class via a tool like ResGen or Visual Studio. // To add or remove a member, edit your .ResX file then rerun ResGen // with the /str option, or rebuild your VS project. [global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "4.0.0.0")] [global::System.Diagnostics.DebuggerNonUserCodeAttribute()] [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()] internal class Statuses { // ... yadda-yadda Statuses.ro.Designer.cs [empty] I've taken both files and put them in a console application and they behave as expected in it, not like in this silverlight application. What is wrong?

  Read the article

• WPF Datagrid zoom issue

  - by David Osborn

  I'm working with the WPF DataGrid from the WPFToolkit and I'm having issues with trying to zoom the entire datagrid. My initial thought was that it was going to be really easy and I would just apply a scale transform to the grid and animate the ScaleX, ScaleY properties when the used clicked a button. This did not work however because the scrollbar was zoomed in making it larger. I need fixed headers and fixed columns on the datagrid so I can't simple use a scrollviewer outside of the datagrid to handle the scrolling. The second thing I tried was to just scale the font size in the grid, but this failed because on shrinking the font size the columns stay at the original width and do not shrink. Finally I thought I had it working by using the below code which goes into the view tree for the datagrid and adds a scale transform to the Scroll Content Presenter. (Also not shown in this code, I apply a transform to the visual tree item for the headers in the same manner so that it scales as well). I thought this was working great until I tested out the horizontal scrolling after zooming. (Vertical scrolling works perfectly.) Before zooming at all the horizontal scrolling is fine, but after zooming, when I scroll horzonitally the display freaks out. It is hard to tell exactly what it is doing, but it sort of looks like the content that is scrolling off the left of the screen is "folding over" and coming back in on the left. Maybe it is just all smashing up on the left side. Does anyone have any ideas how I can get this working, hopefully without throwing out my whole datagrid that is already working quite well otherwise. ScrollContentPresenter sp = (ScrollContentPresenter) VisualTreeHelper.GetChild( VisualTreeHelper.GetChild( VisualTreeHelper.GetChild(VisualTreeHelper.GetChild(dgMatrix, 0), 0), 0),2); ScaleTransform st = new ScaleTransform(1, 1); sp.LayoutTransform = st; DoubleAnimation a = new DoubleAnimation(); a.By = 1.5; a.AutoReverse = false; a.Duration = new Duration(TimeSpan.Parse("0:0:0.25")); st.BeginAnimation(ScaleTransform.ScaleXProperty, a); st.BeginAnimation(ScaleTransform.ScaleYProperty, a);

  Read the article

• LINQ to SQL: To Attach or Not To Attach

  - by bradhe

  So I'm have a really hard time figuring out when I should be attaching to an object and when I shouldn't be attaching to an object. First thing's first, here is a small diagram of my (very simplified) object model. Edit: Okay, apparently I'm not allowed to post images...here you go: http://i.imgur.com/2ROFI.png In my DAL I create a new DataContext every time I do a data-related operation. Say, for instance, I want to save a new user. In my business layer I create a new user. var user = new User(); user.FirstName = "Bob"; user.LastName = "Smith"; user.Username = "bob.smith"; user.Password = StringUtilities.EncodePassword("MyPassword123"); user.Organization = someOrganization; // Assume that someOrganization was loaded and it's data context has been garbage collected. Now I want to go save this user. var userRepository = new RepositoryFactory.GetRepository<UserRepository>(); userRepository.Save(user); Neato! Here is my save logic: public void Save(User user) { if (!DataContext.Users.Contains(user)) { user.Id = Guid.NewGuid(); user.CreatedDate = DateTime.Now; user.Disabled = false; //DataContext.Organizations.Attach(user.Organization); DataContext.Users.InsertOnSubmit(user); } else { DataContext.Users.Attach(user); } DataContext.SubmitChanges(); // Finished here as well. user.Detach(); } So, here we are. You'll notice that I comment out the bit where the DataContext attachs to the organization. If I attach to the organization I get the following exception: NotSupportedException: An attempt has been made to Attach or Add an entity that is not new, perhaps having been loaded from another DataContext. This is not supported. Hmm, that doesn't work. Let me try it without attaching (i.e. comment out that line about attaching to the organization). DuplicateKeyException: Cannot add an entity with a key that is already in use. WHAAAAT? I can only assume this is trying to insert a new organization which is obviously false. So, what's the deal guys? What should I do? What is the proper approach? It seems like L2S makes this quite a bit harder than it should be...

  Read the article

• How can this C and PHP programmer learn Ruby and Rails?

  - by Winston

  I came from a C, php and bash background, it was easy to learn because they all have the same C structure, which I can associate with what I already know. Then 2 years ago I learned Python and I learned it quite well, Python is easier for me to learn than Ruby. Then since last year, I was trying to learn Ruby, then Rails, and I admit, until now I still couldn't get it, the irony is that those are branded as easy to learn, but for a seasoned programmer like me, I just couldn't associate it with what I learned before, I have 2 books on both Ruby and Rails, and when I'm reading it nothing is absorbed into my mind, and I'm close to giving up... In ruby, I'm having a hard time grasping the concepts of blocks, and why there's @variables that can be accessed by other functions, and what does $variable and :variable do? And in Rails, why there's function like this_is_another_function_that_do_this, so thus ruby, is it just a naming convention or it's auto-generated with thisvariable _can_do_this_function. I'm still puzzled that where all those magic concepts and things came from? And now, 1 year of trying and absorbing, but still no progress... Edit: To summarize: How can I learn about blocks, and how can it be related to concepts from PHP/C? Variables, what does does it mean when a variable is prefixed with: @ $ : "Magic concepts", suchs as rails declarations of Records, what happens behind the scenes when I write has_one X OK so, bear with me with my confusion, at least I'm honest with myself, and it's over a year now since I first trying to learn ruby, and I'm not getting younger.. so I learned this in Bash/C/PHP solve_problem($problem) { if [ -e $problem == "trivial" ]; then write_solution(); else breakdown_problem_into_N_subproblems(\; define_relationship_between_subproblems; for i in $( command $each_subproblem ); do solve_problem $i done fi } write_solution(problem) { some_solution=$(command <parameters> "input" | command); command | command $some_solution > output_solved_problem_to_file } breakdown_problem_into_N_subproblems($problems) { for i in $problems; do command $i | command > i_can_output_a_file_right_away done } define_relationship_between_subproblems($problems) { if [ -e $problem == "relationship" ]; then relationship=$(command; command | command; command;) elsif [ -e $problem == "another_relationship" ]; relationship=$(command; command | command; command;) fi } In C/PHP is something like this solve_problem(problem) { if (problem == trivial) write_solution; else { breakdown_problem_into_N_subproblems; define_relationship_between_subproblems; for (each_subproblem) solve_problems(subproblem); } } And now, I just couldn't connect the dots with Ruby, |b|{ blocks }, using @variables, :variables, and variables_with_this_things..

  Read the article

• How would you organize a large complex web application (see basic example)?

  - by Anurag

  How do you usually organize complex web applications that are extremely rich on the client side. I have created a contrived example to indicate the kind of mess it's easy to get into if things are not managed well for big apps. Feel free to modify/extend this example as you wish - http://jsfiddle.net/NHyLC/1/ The example basically mirrors part of the comment posting on SO, and follows the following rules: Must have 15 characters minimum, after multiple spaces are trimmed out to one. If Add Comment is clicked, but the size is less than 15 after removing multiple spaces, then show a popup with the error. Indicate amount of characters remaining and summarize with color coding. Gray indicates a small comment, brown indicates a medium comment, orange a large comment, and red a comment overflow. One comment can only be submitted every 15 seconds. If comment is submitted too soon, show a popup with appropriate error message. A couple of issues I noticed with this example. This should ideally be a widget or some sort of packaged functionality. Things like a comment per 15 seconds, and minimum 15 character comment belong to some application wide policies rather than being embedded inside each widget. Too many hard-coded values. No code organization. Model, Views, Controllers are all bundled together. Not that MVC is the only approach for organizing rich client side web applications, but there is none in this example. How would you go about cleaning this up? Applying a little MVC/MVP along the way? Here's some of the relevant functions, but it will make more sense if you saw the entire code on jsfiddle: /** * Handle comment change. * Update character count. * Indicate progress */ function handleCommentUpdate(comment) { var status = $('.comment-status'); status.text(getStatusText(comment)); status.removeClass('mild spicy hot sizzling'); status.addClass(getStatusClass(comment)); } /** * Is the comment valid for submission */ function commentSubmittable(comment) { var notTooSoon = !isTooSoon(); var notEmpty = !isEmpty(comment); var hasEnoughCharacters = !isTooShort(comment); return notTooSoon && notEmpty && hasEnoughCharacters; } // submit comment $('.add-comment').click(function() { var comment = $('.comment-box').val(); // submit comment, fake ajax call if(commentSubmittable(comment)) { .. } // show a popup if comment is mostly spaces if(isTooShort(comment)) { if(comment.length < 15) { // blink status message } else { popup("Comment must be at least 15 characters in length."); } } // show a popup is comment submitted too soon else if(isTooSoon()) { popup("Only 1 comment allowed per 15 seconds."); } });

  Read the article

• Google Chrome audit on caching

  - by Álvaro G. Vicario

  If I run an audit on my sites with Google Chrome, I get this message in the Leverage browser caching section: The following resources are missing a cache expiration. Resources that do not specify an expiration may not be cached by browsers: A list of all the pictures follows. I get a similar notice in Leverage proxy caching: Consider adding a "Cache-Control: public" header to the following resources: Apart from pictures, I also get a notice about HTML, CSS and JavaScript files: The following resources are explicitly non-cacheable. Consider making them cacheable if possible: Its funny because I've worked hard to cache all static contents (except for pictures, where I just left Apache's default settings). Firefox does indeed store all these items in cache. Is there anything I should improve in my HTTP headers? Here's the complete header set of some items as loaded after removing the browser caché. Pictures use default settings I didn't really check before, the rest should be cachéd for three hours. I can set headers with both .htaccess and PHP. PNG HTTP/1.1 200 OK Date: Sat, 31 Jul 2010 12:46:14 GMT Server: Apache Last-Modified: Thu, 18 Mar 2010 21:40:54 GMT Etag: "c48024-230-4821a15d6c580" Accept-Ranges: bytes Content-Length: 560 Keep-Alive: timeout=4 Connection: Keep-Alive Content-Type: image/png HTML HTTP/1.1 200 OK Date: Sat, 31 Jul 2010 12:46:13 GMT Server: Apache X-Powered-By: PHP/5.2.11 Expires: Sat, 31 Jul 2010 15:46:13 GMT Cache-Control: max-age=10800, s-maxage=10800, must-revalidate, proxy-revalidate Content-Encoding: gzip Vary: Accept-Encoding Last-Modified: Wed, 24 Mar 2010 20:30:36 GMT Keep-Alive: timeout=4 Connection: Keep-Alive Transfer-Encoding: chunked Content-Type: text/html; charset=ISO-8859-15 CSS HTTP/1.1 200 OK Date: Sat, 31 Jul 2010 12:48:21 GMT Server: Apache X-Powered-By: PHP/5.2.11 Expires: Sat, 31 Jul 2010 15:48:21 GMT Cache-Control: max-age=10800, s-maxage=10800, must-revalidate, proxy-revalidate Content-Encoding: gzip Vary: Accept-Encoding Last-Modified: Thu, 18 Mar 2010 21:40:12 GMT Keep-Alive: timeout=4 Connection: Keep-Alive Transfer-Encoding: chunked Content-Type: text/css JavaScript HTTP/1.1 200 OK Date: Sat, 31 Jul 2010 12:48:21 GMT Server: Apache X-Powered-By: PHP/5.2.11 Expires: Sat, 31 Jul 2010 15:48:21 GMT Cache-Control: max-age=10800, s-maxage=10800, must-revalidate, proxy-revalidate Content-Encoding: gzip Vary: Accept-Encoding Last-Modified: Thu, 18 Mar 2010 21:40:12 GMT Keep-Alive: timeout=4 Connection: Keep-Alive Transfer-Encoding: chunked Content-Type: application/x-javascript Update I've tested Jumby's suggestion and set my CSS's expire to 1 year: Cache-Control:max-age=31536000, s-maxage=31536000, must-revalidate, proxy-revalidate Connection:Keep-Alive Content-Encoding:gzip Content-Length:4198 Content-Type:text/css Date:Mon, 02 Aug 2010 20:48:56 GMT Expires:Tue, 02 Aug 2011 20:48:56 GMT Keep-Alive:timeout=5, max=99 Last-Modified:Thu, 18 Mar 2010 20:40:12 GMT Server:Apache/2.2.14 (Win32) PHP/5.3.1 Vary:Accept-Encoding X-Powered-By:PHP/5.3.1 However, Chrome still claims "explicitly non-cacheable".

  Read the article

• do you want try ? [closed]

  - by gemxia

  Only with time and hard work, that can you get an IT certification. Although there are hundreds of certifications for you to pick from, the basic steps to get certified are the same. The following steps are certain to clear your puzzles about the preparation process of your <. The first step to take is choosing a certification. It is simple but at the same time very important. Make sure to choose the certifications that are respected in your industries. The second step you should take is to evaluate your experience. Find out what skills and experience the IBM certification is expecting. Then, decide what type of training is suitable for you. Preparation books will certainly not make you an expert in subjects you’re not already an expert in. But, for the subject areas you know little or nothing about, a study guide provides you clues and guidance about what the important information from those subjects is when it comes to passing the Examkiller IBM examination exam. Visit certification forums during your 000-M62 certification exam preparation. In this way, you can learn from others’ mistakes and example, meanwhile help your own studies. Achieving your goals without proper training is a sure road to failure. Knowing about a topic and having special expertise in it are completely different. One cannot be an expert in the IT industry without the proper foundation. Taking a training class for Examkiller IBM exam might be a guaranteed way. When the economy dips and budgets get tightened, one of the first things to go from corporate spending is training. There are plenty of courses, boot camps and cram sessions that promise to prepare you for the IBM exam, but they are exceptionally expensive. As much as possible, for your own benefit, you should look for resources that are free. Vendor of IBM offers free resource in their sites. These practice exams are the closest to the real exams. If you think that you have got ready for the exam, you can take the fourth now, which is registering your exam. Even if you have passed your <, yet you can’t relax, since there are still so many certifications ahead. If you have just memorized some questions and answers, excepting a fluke, then, don’t take the IBM test exam, until you really have the experience and skills the certification requires.

  Read the article

• Occasional Date or timezone discrepancy in hudson or maven with jodatime

  - by TheStijn

  hi, I hope following explanation will make sense because it's a weird problem we're facing and hard to describe. We have a maven project which gets build in hudson and that contains some unit tests where dates are used and asserted. The hudson server runs on solaris. Now, occasionally (like 30% of the times) the unit tests using dates fail because 3,5 hours are deducted from the specified time in the unit test and hence asserts start failing. The other 70% everything works fine although nothing at all changed in the code and we run the hudson job several times an hour. I add following code to a unittest to check the time: @Test public void testDate() { System.out.println("new DateMidnight(2011, 1, 5).toDate();"); System.out.println(new DateMidnight(2011, 1, 5).toDate()); System.out.println(new DateMidnight(2011, 1, 5).toDate().getTime()); Calendar cal = Calendar.getInstance(); cal.set(Calendar.YEAR, 2011); cal.set(Calendar.MONTH, 0); cal.set(Calendar.DAY_OF_MONTH, 5); cal.set(Calendar.HOUR, 0); cal.set(Calendar.MINUTE, 0); cal.set(Calendar.SECOND, 0); cal.set(Calendar.MILLISECOND, 0); System.out.println("cal.getTime();"); System.out.println(cal.getTime()); System.out.println(cal.getTime().getTime()); } So basically it should print the same thing when using jodatime or plain old Calendar. This is the case in 70% of the runs; for the other 30% I get following printouts: Running TestSuite new DateMidnight(2011, 1, 5).toDate(); Tue Jan 04 21:30:00 MET 2011 1294173000000 cal.getTime(); Wed Jan 05 12:00:00 MET 2011 1294225200000 Local maven tests never appear the pose this problem and we can't figure out what could be the cause of it. Especially, we can't think of a single reason why the tests sometimes pass and sometimes fail without changing any code nor hudson or server setting. Also, we run the maven install with cobertura which means that the unit tests are run twice. It happens also that they pass the first time and fail the second time or the other way around or that they fail both times. Thanks for any help, Stijn

  Read the article

• Would Ruby on Rails be appropriate for this Foreign Language project?

  - by Lynne Overesch-Maister

  I'm a Spanish professor & computer groupie. About 15 years ago, I authored in HyperCard a series of verb conjugation programs that are now completely out of date with respect to System OS X. I would like to redo these programs myself because I had a lot of fun doing them last time (mostly I coded while my son played in Leaps and Bounds, you know, one of those places where parents take their kids & let them run wild through the tubes...). Colleagues have mentioned using Flash, Director, and various other solutions, but I saw a presentation on RoR at our SIDLIT conference today, and was inspired. I will be parsing and comparing strings (and there are other features on top of that, but that is the main one), "adding" strings relationally indexed in some kind of database(s). It will also have to handle various foreign characters (accents, upside down question marks, etc.). On top of the main process of the program, it will have to provide a practice vs. test mode, keep track of specific answers as well as totals right/wrong, and print a report. Would this be either easier and/or more efficiently done in RoR than in other languages. I am pretty sure that it will work on a Microsoft server, right? Because I think that is where most of our stuff is. I would be programming either on a Mac or a PC, whichever you think is easier. So, in summary, is RoR the way for me to go with this project? If I have some (little) experience programming in Hypercard and C, should I be able to pick RoR up fairly quickly? What things will I need to start (I already saw something called Redhills foreign key migration plugin, which I assume would be beneficial)? I still have my old scripts from hypercard, however what I would really like to do is to combine all six of my former tense-specific programs into one larger program. I figure that it wouldn't be too hard to reference the individual tenses in some way--could that be a class? Many thanks for any help you can give me on this forum.

  Read the article

• How can I troubleshoot an APPCRASH in Internet Explorer?

  - by Schnapple

  I'm writing an ActiveX control using the firebreath framework (hi taxilian!) and while it technically works, I'm running into a weird issue that appears to be unique to me. I've followed the instructions to create a simple plugin and then I ran it in Internet Explorer 8 on Windows 7 x64 (firebreath sets up a test page for the control). But as soon as I try to test it (clicking on a link that fires off JavaScript to interact with the control), IE crashes. Hard. "Internet Explorer has stopped working" style. If I try the control in Firefox (the resulting registered DLL can also be called as a Firefox plugin using a MIME type), it works fine. If I try it on my XP box, it works fine. I emailed the DLL and the testing page to a coworker in the next cube who is like me also running Windows 7 x64 and it works for him just fine as well, so it's not something unique to Windows 7 or x64. When it crashes I get this message: Problem signature: Problem Event Name: APPCRASH Application Name: iexplore.exe Application Version: 8.0.7600.16385 Application Timestamp: 4a5bc69e Fault Module Name: RPCRT4.dll Fault Module Version: 6.1.7600.16385 Fault Module Timestamp: 4a5bdb3b Exception Code: c0000005 Exception Offset: 000220b1 OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033 Additional Information 1: 0a9e Additional Information 2: 0a9e372d3b4ad19135b953a78882e789 Additional Information 3: 0a9e Additional Information 4: 0a9e372d3b4ad19135b953a78882e789 Which tells me nothing extremely useful. I can have it attach to a debugger but it just tells me a long list of DLL's, none of which are the ActiveX control in question. It's almost like it's not even getting there. I did a sfc /scannow yesterday to see if anything on my system is corrupt and nothing came up as wrong. I tried various different security levels in IE, but nothing seems to have any effect. As this is a development machine there has been all matter of crap installed on it, so I figure it's bound to be something I've installed since October (when Win7 was released) but I cannot figure out what it is. I presume the information it's giving me when I attach to Visual Studio is useful somehow but I don't know how to interpret it. Admittedly I'm mainly a C#/.NET developer who's a bit out of his element with C/C++ and troubleshooting native code, but does anyone have any advice on how to proceed on figuring out why this very simple ActiveX control crashes IE on my machine and nowhere else?

  Read the article

• find words in a hashset or treeset?

  - by icelated

  I am piping in a file and storing it into a treeset. I am trying to count unique words.. I am placing words that i dont want into a hashset. "a","the", "and" I want to check to see if the file contains those words, before i place them into the TreeSet.. i know i need some sort of if(word == find) ? i just dont know how to do it.. Sorry about formatting. its hard to get it correct after you paste. this is what i have.. import java.util.Scanner; import java.util.ArrayList; import java.util.TreeSet; import java.util.Iterator; import java.util.HashSet; public class Project1 { public static void main(String[] args) { Scanner sc = new Scanner(System.in); String word; String grab; int count = 0; int count2 =0; int count3 =0; int count4 =0; int number; TreeSet<String> a = new TreeSet<String>(); HashSet<String> find = new HashSet<String>(); System.out.println("Project 1\n"); find.add("a"); find.add("and"); find.add("the"); while (sc.hasNext()) { word = sc.next(); word = word.toLowerCase(); for(int i = 0; i < word.length(); i++ ) { if(Character.isDigit(word.charAt(i))) { count3++; } } //if( a.contains("a") ) //|| word.matches("and") || word.matches("the")|| word.contains("$")) //{ // count2++; // } a.add(word); if (word.equals("---")) { break; } } System.out.println("a size"); System.out.println(a.size()); // count = count2 - count; System.out.println("unique words"); System.out.println(a.size() - count2 - count3); System.out.println("\nbye..."); } }

  Read the article

• Can LINQ-to-SQL omit unspecified columns on insert so a database default value is used?

  - by Todd Ropog

  I have a non-nullable database column which has a default value set. When inserting a row, sometimes a value is specified for the column, sometimes one is not. This works fine in TSQL when the column is omitted. For example, given the following table: CREATE TABLE [dbo].[Table1]( [id] [int] IDENTITY(1,1) NOT NULL, [col1] [nvarchar](50) NOT NULL, [col2] [nvarchar](50) NULL, CONSTRAINT [PK_Table1] PRIMARY KEY CLUSTERED ([id] ASC) ) GO ALTER TABLE [dbo].[Table1] ADD CONSTRAINT [DF_Table1_col1] DEFAULT ('DB default') FOR [col1] The following two statements will work: INSERT INTO Table1 (col1, col2) VALUES ('test value', '') INSERT INTO Table1 (col2) VALUES ('') In the second statement, the default value is used for col1. The problem I have is when using LINQ-to-SQL (L2S) with a table like this. I want to produce the same behavior, but I can't figure out how to make L2S do that. I want to be able to run the following code and have the first row get the value I specify and the second row get the default value from the database: var context = new DataClasses1DataContext(); var row1 = new Table1 { col1 = "test value", col2 = "" }; context.Table1s.InsertOnSubmit(row1); context.SubmitChanges(); var row2 = new Table1 { col2 = "" }; context.Table1s.InsertOnSubmit(row2); context.SubmitChanges(); If the Auto Generated Value property of col1 is False, the first row is created as desired, but the second row fails with a null error on col1. If Auto Generated Value is True, both rows are created with the default value from the database. I've tried various combinations of Auto Generated Value, Auto-Sync and Nullable, but nothing I've tried gives the behavior I want. L2S does not omit the column from the insert statement when no value is specified. Instead it does something like this: INSERT INTO Table1 (col1, col2) VALUES (null, '') ...which of course causes a null error on col1. Is there some way to get L2S to omit a column from the insert statement if no value is given? Or is there some other way to get the behavior I want? I need the default value at the database level because not all row inserts are done via L2S, and in some cases the default value is a little more complex than a hard coded value (e.g. creating the default based on another field) so I'd rather avoid duplicating that logic.

  Read the article

• markitup wysiwyg with a standard HTML form

  - by Chris

  Hi, I'm trying to use the markitup editor on my site and I'm having a problem trying to figure out what I need to do to submit the text area to my server side script. I'm guessing there is something simple that needs to be done but my lack of JS/JQuery knowledge is making it really hard to find a answer The editor works fine, I just want to use my own form and submit button with it, however when I try to submit the form I don't get any of the textarea data in my script. Any idea what I need to do? This is the min that works (before submit) In the Head of my HTML <script type="text/javascript" > <!-- $(document).ready(function() { $("#markItUp").markItUp(mySettings); }); --> </script> And the body: <form id="postpreview" name="newpost" action="/someurl" method="POST" /> <input type="hidden" name="key1" value="val1" /> <input type="hidden" name="key2" value="val2" /> <textarea name="text" id="markItUp"></textarea> <input id="SubmitPost" type="image" value="Continue" name="Doit" class="preview" src="/img/somimage" /> </form> As I said, everything prior to the submit works but once I submit I don't get anything for the form data element "text". I tried doing this in the head: <script type="text/javascript" > <!-- $(document).ready(function() { $("#markItUp").markItUp(mySettings); $("#SubmitPost").click(function(){ data = markItUp.textarea.value; $.post("scripturl",{ key1: "value1", key2: "value2", text: data }); }); }); --> </script> I've also tried: <script type="text/javascript" > <!-- $(document).ready(function() { $("#markItUp").markItUp(mySettings); $("#postpreview").submit(function(){ var data = $("#markItUp").html(); $.post("live",{ func: "posting", text: data }); return false; }); }); --> </script> And I have no luck - the last attempt above just disabled the form (so clicking on the submit or preview buttons did nothing). Any ideas? I guessing its really simple to use my own form but I have no clue how to do it. TIA!

  Read the article

• Java Thread Management and Application Flow

  - by user119179

  I have a Java application that downloads information (Entities) from our server. I use a Download thread to download the data. The flow of the download process is as follows: Log in - The user entity is downloaded Based on the User Entity, download a 'Community' entities List and Display in drop down Based on Community drop down selection, Download and show 'Org Tree' in a JTree Based on Node selection, download Category entities and display in drop down Based on Category selection, download Sub Category entities and display in drop down Based on Sub Category selection download a large data set and save it The download occurs in a thread so the GUI does not 'freeze'. It also allows me to update a Progress Bar. I need help with managing this process. The main problem is when I download entity data I have to find a way to wait for the thread to finish before attempting to get the entity and move to the next step in the app flow. So far I have used a modal dialog to control flow. I start the thread, pop up a modal and then dispose of the modal when the thread is finished. The modal/thread are Observer/Observable the thread does a set changed when it is finished and the dialog disposes. Displaying a modal effectively stops the flow of the application so it can wait for the download to finish. I also tried just moving all the work flow to Observers. All relevant GUI in the process are Observers. Each update method waits for the download to finish and then calls the next piece of GUI which does its own downloading. So far I found these two methods produce code that is hard to follow. I would like to 'centralize' this work flow so other developers are not pulling out their hair when they try to follow it. My Question is: Do you have any suggestions/examples where a work flow such as this can be managed in a way that produces code that is easy to follow? I know 'easy' is a relative term and I know my both my options already work but I would like to get some ideas from other coders while I still have time to change it. Thank you very much.

  Read the article

• LSP packet modify

  - by kellogs

  Hello, anybody care to share some insights on how to use LSP for packet modifying ? I am using the non IFS subtype and I can see how (pseudo?) packets first enter WSPRecv. But how do I modify them ? My inquiry is about one single HTTP response that causes WSPRecv to be called 3 times :((. I need to modify several parts of this response, but since it comes in 3 slices, it is pretty hard to modify it accordingly. And, maybe on other machines or under different conditions (such as high traffic) there would only be one sole WSPRecv call, or maybe 10 calls. What is the best way to work arround this (please no NDIS :D), and how to properly change the buffer (lpBuffers-buf) by increasing it ? int WSPAPI WSPRecv( SOCKET s, LPWSABUF lpBuffers, DWORD dwBufferCount, LPDWORD lpNumberOfBytesRecvd, LPDWORD lpFlags, LPWSAOVERLAPPED lpOverlapped, LPWSAOVERLAPPED_COMPLETION_ROUTINE lpCompletionRoutine, LPWSATHREADID lpThreadId, LPINT lpErrno ) { LPWSAOVERLAPPEDPLUS ProviderOverlapped = NULL; SOCK_INFO *SocketContext = NULL; int ret = SOCKET_ERROR; *lpErrno = NO_ERROR; // // Find our provider socket corresponding to this one // SocketContext = FindAndRefSocketContext(s, lpErrno); if ( NULL == SocketContext ) { dbgprint( "WSPRecv: FindAndRefSocketContext failed!" ); goto cleanup; } // // Check for overlapped I/O // if ( NULL != lpOverlapped ) { /*bla bla .. not interesting in my case*/ } else { ASSERT( SocketContext->Provider->NextProcTable.lpWSPRecv ); SetBlockingProvider(SocketContext->Provider); ret = SocketContext->Provider->NextProcTable.lpWSPRecv( SocketContext->ProviderSocket, lpBuffers, dwBufferCount, lpNumberOfBytesRecvd, lpFlags, lpOverlapped, lpCompletionRoutine, lpThreadId, lpErrno); SetBlockingProvider(NULL); //is this the place to modify packet length and contents ? if (strstr(lpBuffers->buf, "var mapObj = null;")) { int nLen = strlen(lpBuffers->buf) + 200; /*CHAR *szNewBuf = new CHAR[]; CHAR *pIndex; pIndex = strstr(lpBuffers->buf, "var mapObj = null;"); nLen = strlen(strncpy(szNewBuf, lpBuffers->buf, (pIndex - lpBuffers->buf) * sizeof (CHAR))); nLen = strlen(strncpy(szNewBuf + nLen * sizeof(CHAR), "var com = null;\r\n", 17 * sizeof(CHAR))); pIndex += 18 * sizeof(CHAR); nLen = strlen(strncpy(szNewBuf + nLen * sizeof(CHAR), pIndex, 1330 * sizeof (CHAR))); nLen = strlen(strncpy(szNewBuf + nLen * sizeof(CHAR), "if (com == null)\r\n" \ "com = new ActiveXObject(\"InterCommJS.Gateway\");\r\n" \ "com.lat = latitude;\r\n" \ "com.lon = longitude;\r\n}", 111 * sizeof (CHAR))); pIndex = strstr(szNewBuf, "Content-Length:"); pIndex += 16 * sizeof(CHAR); strncpy(pIndex, "1465", 4 * sizeof(CHAR)); lpBuffers->buf = szNewBuf; lpBuffers->len += 128;*/ } if ( SOCKET_ERROR != ret ) { SocketContext->BytesRecv += *lpNumberOfBytesRecvd; } } cleanup: if ( NULL != SocketContext ) DerefSocketContext( SocketContext, lpErrno ); return ret; } Thank you

  Read the article

• How to represent different entities that have identical behavior?

  - by Dominik

  I have several different entities in my domain model (animal species, let's say), which have a few properties each. The entities are readonly (they do not change state during the application lifetime) and they have identical behavior (the differ only by the values of properties). How to implement such entities in code? Unsuccessful attempts: Enums I tried an enum like this: enum Animals { Frog, Duck, Otter, Fish } And other pieces of code would switch on the enum. However, this leads to ugly switching code, scattering the logic around and problems with comboboxes. There's no pretty way to list all possible Animals. Serialization works great though. Subclasses I also thought about where each animal type is a subclass of a common base abstract class. The implementation of Swim() is the same for all Animals, though, so it makes little sense and serializability is a big issue now. Since we represent an animal type (species, if you will), there should be one instance of the subclass per application, which is hard and weird to maintain when we use serialization. public abstract class AnimalBase { string Name { get; set; } // user-readable double Weight { get; set; } Habitat Habitat { get; set; } public void Swim(); { /* swim implementation; the same for all animals but depends uses the value of Weight */ } } public class Otter: AnimalBase{ public Otter() { Name = "Otter"; Weight = 10; Habitat = "North America"; } } // ... and so on Just plain awful. Static fields This blog post gave me and idea for a solution where each option is a statically defined field inside the type, like this: public class Animal { public static readonly Animal Otter = new Animal { Name="Otter", Weight = 10, Habitat = "North America"} // the rest of the animals... public string Name { get; set; } // user-readable public double Weight { get; set; } public Habitat Habitat { get; set; } public void Swim(); } That would be great: you can use it like enums (AnimalType = Animal.Otter), you can easily add a static list of all defined animals, you have a sensible place where to implement Swim(). Immutability can be achieved by making property setters protected. There is a major problem, though: it breaks serializability. A serialized Animal would have to save all its properties and upon deserialization it would create a new instance of Animal, which is something I'd like to avoid. Is there an easy way to make the third attempt work? Any more suggestions for implementing such a model?

  Read the article

• How do you unit test a unit test?

  - by FlySwat

  I was watching Rob Connerys webcasts on the MVCStoreFront App, and I noticed he was unit testing even the most mundane things, things like: public Decimal DiscountPrice { get { return this.Price - this.Discount; } } Would have a test like: [TestMethod] public void Test_DiscountPrice { Product p = new Product(); p.Price = 100; p.Discount = 20; Assert.IsEqual(p.DiscountPrice,80); } While, I am all for unit testing, I sometimes wonder if this form of test first development is really beneficial, for example, in a real process, you have 3-4 layers above your code (Business Request, Requirements Document, Architecture Document), where the actual defined business rule (Discount Price is Price - Discount) could be misdefined. If that's the situation, your unit test means nothing to you. Additionally, your unit test is another point of failure: [TestMethod] public void Test_DiscountPrice { Product p = new Product(); p.Price = 100; p.Discount = 20; Assert.IsEqual(p.DiscountPrice,90); } Now the test is flawed. Obviously in a simple test, it's no big deal, but say we were testing a complicated business rule. What do we gain here? Fast forward two years into the application's life, when maintenance developers are maintaining it. Now the business changes its rule, and the test breaks again, some rookie developer then fixes the test incorrectly...we now have another point of failure. All I see is more possible points of failure, with no real beneficial return, if the discount price is wrong, the test team will still find the issue, how did unit testing save any work? What am I missing here? Please teach me to love TDD, as I'm having a hard time accepting it as useful so far. I want too, because I want to stay progressive, but it just doesn't make sense to me. EDIT: A couple people keep mentioned that testing helps enforce the spec. It has been my experience that the spec has been wrong as well, more often than not, but maybe I'm doomed to work in an organization where the specs are written by people who shouldn't be writing specs.

  Read the article

• WPF DataTemplates with VS2010 designer support + reusable - would you do it that way?

  - by Christian

  Ok, I am currently tidying up all my old stuff. I ran into the issue of "code only DataTemplates" - which are really a pain in the ass. You can't see anything, they are really hard to design, and I want to improve my project. So I had the idea to use the following solution. The main benefits are: You have designer support for your data template You can easily include example sample data The file naming is consistent and easy to remember The preview does not require an additional XAML wrapper (even with code only controls) I will try to explain and illustrate my solution using a few pictures. I am interested in feedback, especially if you can imagine a better way to do it. And, of course, if you see any maintenance or performance issues. Ok, lets start with a simple PreviewObject. I want to have some data in it, so I create a subclass which will automatically fill in some dummy data. Then I add a list to the control, and name this list. Afterwards I add a DataTemplate, this is the sole reason for the whole control (to be able to see and edit the DataTemplate in place): Now I use this control to get my DataTemplate, to use it in other places. To make this easier, I added some code in the code behind, see here: Now I want a control to show me a list of PreviewItems, so I created a "code-only" control which creates an instance of my service (or gets one using DI in real world) and fills its list box with it: To view the result of this work, I added this control inside the same named XAML, this is basically only to be able to see the final result: What I do not like in this solution: The need to create the last control in "code only". So I tried something different while writing this post. The following two screenshots illustrate the approach. I am creating an instance of the service inside the DataContext, and I am using bindings to supply the Itemssourc and the ItemTemplate. The reason for the strange "static property" is refactoring support. If I hardcode the path in the designer (e.g. using "Path = PreviewHistory") and I refactor the names (which happens quite often, early design phase) - I screw up my controls without realizing it. Does anyone has a better idea for this? I am using Resharper, btw. Thanks for any input, and sorry for the image overkill. Just easier to explain that way.. Chris

  Read the article

• How to create a compiler in vb.net

  - by Cyclone

  Before answering this question, understand that I am not asking how to create my own programming language, I am asking how, using vb.net code, I can create a compiler for a language like vb.net itself. Essentially, the user inputs code, they get a .exe. By NO MEANS do I want to write my own language, as it seems other compiler related questions on here have asked. I also do not want to use the vb.net compiler itself, nor do I wish to duplicate the IDE. The exact purpose of what I wish to do is rather hard to explain, but all I need is a nudge in the right direction for writing a compiler (from scratch if possible) which can simply take input and create a .exe. I have opened .exe files as plain text before (my own programs) to see if I could derive some meaning from what I assumed would be human readable text, yet I was obviously sorely disappointed to see the random ascii, though it is understandable why this is all I found. I know that a .exe file is simply lines of code, being parsed by the computer it is on, but my question here really boils down to this: What code makes up a .exe? How could I go about making one in a plain text editor if I wanted to? (No, I do not want to do that, but if I understand the process my goals will be much easier to achieve.) What makes an executable file an executable file? Where does the logic of the code fit in? This is intended to be a programming question as opposed to a computer question, which is why I did not post it on SuperUser. I know plenty of information about the System.IO namespace, so I know how to create a file and write to it, I simply do not know what exactly I would be placing inside this file to get it to work as an executable file. I am sorry if this question is "confusing", "dumb", or "obvious", but I have not been able to find any information regarding the actual contents of an executable file anywhere. One of my google searches Something that looked promising EDIT: The second link here, while it looked good, was an utter fail. I am not going to waste hours of my time hitting keys and recording the results. "Use the "Alt" and the 3-digit combinations to create symbols that do not appear on the keyboard but that you need in the program." (step 4) How the heck do I know what symbols I need??? Thank you very much for your help, and my apologies if this question is a nooby or "bad" one. To sum this up simply: I want to create a program in vb.net that can compile code in a particular language to a single executable file. What methods exist that can allow me to do this, and if there are none, how can I go about writing my own from scratch?

  Read the article

• Intermittent fillMode=kCAFillModeForwards bug using CAKeyframeAnimation with path

  - by Mark24x7

  I'm having an intermittent problem when I move a UIImageView around the screen using CAKeyframeAnimation. I want the position of the UIImageView to remain where the animation ends when it is done. This bug only happens for certain start and end points. When I use random points it works correctly most of the time, but about 5-15% of the time it fails and snaps back to the pre-animation position. The problem only appears when using CAKeyframeAnimation using the path property. If I use the values property the bug does not appear. I am setting removedOnCompletion = NO, and fillMode = kCAFillModeForwards. I have posted a link to a test Xcode below. Here is my code for setting up the animation. I have a property usePath. When this is YES, the bug appears. When I set usePath to NO, the snap back bug does not happen. In this case I am using a path that is a simple line, but once I resolve this bug with a simple path, I will use a more complex path with curves in it. // create the point CAKeyframeAnimation *moveAnimation = [CAKeyframeAnimation animationWithKeyPath:@"position"]; if (self.usePath) { CGMutablePathRef path = CGPathCreateMutable(); CGPathMoveToPoint(path, NULL, startPt.x, startPt.y); CGPathAddLineToPoint(path, NULL, endPt.x, endPt.y); moveAnimation.path = path; CGPathRelease(path); } else { moveAnimation.values = [NSArray arrayWithObjects: [NSValue valueWithCGPoint:startPt], [NSValue valueWithCGPoint:endPt], nil]; } moveAnimation.calculationMode = kCAAnimationPaced; moveAnimation.duration = 0.5f; moveAnimation.removedOnCompletion = NO; // leaves presentation layer in final state; preventing snap-back to original state moveAnimation.fillMode = kCAFillModeForwards; moveAnimation.timingFunction = [CAMediaTimingFunction functionWithName:kCAMediaTimingFunctionEaseOut]; // moveAnimation.delegate = self; // start the animation [ball.layer addAnimation:moveAnimation forKey:@"moveAnimation"]; To dl and view my test project goto test project (http://www.24x7digital.com/downloads/PathFillModeBug.zip) Tap the 'Move Ball' button to start the animation of the ball. I have hard coded a start and end point which causes the bug to happen every time. Use the switch to change usePath to YES or NO. When usePath is YES, you will see the snap back bug. When usePath is NO, you will not see the snap back bug. I'm using SDK 3.1.3, but I have seen this bug using SDK 3.0 as well, and I have seen the bug on the Sim and on my iPhone. Any idea on how to fix this or if I am doing something wrong are appreciated. Thanks, Mark.

  Read the article

• Serializing Class Derived from Generic Collection yet Deserializing the Generic Collection

  - by Stacey

  I have a Repository Class with the following method... public T Single<T>(Predicate<T> expression) { using (var list = (Models.Collectable<T>)System.Xml.Serializer.Deserialize(typeof(Models.Collectable<T>), FileName)) { return list.Find(expression); } } Where Collectable is defined.. [Serializable] public class Collectable<T> : List<T>, IDisposable { public Collectable() { } public void Dispose() { } } And an Item that uses it is defined.. [Serializable] [System.Xml.Serialization.XmlRoot("Titles")] public partial class Titles : Collectable<Title> { } The problem is when I call the method, it expects "Collectable" to be the XmlRoot, but the XmlRoot is "Titles" (all of object Title). I have several classes that are collected in .xml files like this, but it seems pointless to rewrite the basic methods for loading each up when the generic accessors do it - but how can I enforce the proper root name for each file without hard coding methods for each one? The [System.Xml.Serialization.XmlRoot] seems to be ignored. When called like this... var titles = Repository.List<Models.Title>(); I get the exception <Titlesxmlns=''> was not expected. The XML is formatted such as. .. <?xml version="1.0" encoding="utf-16"?> <Titles xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <Title> <Id>442daf7d-193c-4da8-be0b-417cec9dc1c5</Id> </Title> </Titles> Here is the deserialization code. public static T Deserialize<T>(String xmlString) { System.Xml.Serialization.XmlSerializer XmlFormatSerializer = new System.Xml.Serialization.XmlSerializer(typeof(T)); StreamReader XmlStringReader = new StreamReader(xmlString); //XmlTextReader XmlFormatReader = new XmlTextReader(XmlStringReader); try { return (T)XmlFormatSerializer.Deserialize(XmlStringReader); } catch (Exception e) { throw e; } finally { XmlStringReader.Close(); } }

  Read the article

• N2 CMS SlidingCurtain control is not visible

  - by Carl Raymond

  I just set up a new N2 site by starting with the MVC 2 Web Application template in Visual Studio, then following the directions in N2 CMS Developer Documentation in the section Integrating with Existing ASP.NET MVC Application. I have the basic site running now, but with one problem: the sliding curtain widget that holds the administrative controls is not visible in the upper right corner (when logged in, of course). I can make it visible the hard way by using Firebug to locate it in the DOM, and then disabling a couple of the CSS positioning elements. Once I do that, it seems to work normally. After I open it that way, I can click the various controls, or close it up (and I see the animation). But then it's off screen again. My master page has the sliding curtain just inside the <body> tag: <body> <n2:SlidingCurtain runat="server"> <n2:ControlPanel runat="server" /> </n2:SlidingCurtain> ... The site.css file generated in the base MVC site doesn't seem to do any positioning that would affect this. Firebug shows that right after by <body> tag, I have this: <div class="sc" id="SC" style="top: -2px; left: -574px;"><div class="scContent"> .... The style for <div class="sc" ...> is element.style { left:-574px; top:-2px; } .sc { background:#FFFFFF none repeat-x scroll 0 0; border-color:#CCCCBB; border-style:none solid solid none; border-width:1px; left:-200px; position:fixed; top:-200px; z-index:990; } If I disable both top: and both left: rules, the widget appears.

  Read the article

• Which mobile operating system should I code for?

  - by samgoody

  It seems as though mobile computing has fully arrived. I would like to rewrite two of our programs for mobile devices, but am a bit lost as to which platform to target. Complicating this decision: I would need to learn the relevant languages and IDEs - my coding to date has been almost all web based (PHP, JS, Actionscript, etc. Some ASPX). Most users seem to be religious about their mobile decision, so oral conversations leave me more confused then enlightened. I do not yet own a smartphone - will have to buy one once I know which platform to be aiming for. Both of my programs are more for business users, (one is only useful for C.P.A.s). I am a single developer, and cannot develop for more than one platform at a time. Getting it right is important. Based on what I've found on the web, I would've expected RIM to be a shoo-in, and the general order to be as follows: RIM Blackberry - More of them than any other brand. Despite naysayers, they've had double the sales (or perhaps 5X the sales) of any other smartphone, and have continued to grow. And, they have business users. Android - According to Schmidt, they have outsold everyone else except RIM (though I can't find where I read that now), and they are just getting started. According to Comscore, they are already at 8% of the market and expected to hit Shcmidt's claims within six months. Nokia - The largest worldwide. If they would just make up between Maemo or Symbian, I would be far less confused. iPhone - Much more competition by other apps, fewer sales to be had, and a overlord that can delay or cancel my app at any time. Is Cocoa hard to learn? Windows Mobile - Word is that version 7 will not be backwards compatible and losing market share. Palm WebOS - Perhaps this should go first, as it is the only one that offers tools to make my life easy as a web application developer. No competition in marketplace. But not very many users either. However, a search on StackOverflow shows a hugely disproportionate number of iPhone questions versus Blackberry. Likewise, there are clearly more apps on iPhone, so it must be getting developer love. What is the one platform I should develop for? Please back up your answer with the logic.

  Read the article

• Delphi interface cast using TValue

  - by conciliator

  I've recently experimented extensively with interfaces and D2010 RTTI. I don't know at runtime the actual type of the interface; although I will have access to it's qualified name using a string. Consider the following: program rtti_sb_1; {$APPTYPE CONSOLE} uses SysUtils, Rtti, TypInfo, mynamespace in 'mynamespace.pas'; var ctx: TRttiContext; InterfaceType: TRttiType; Method: TRttiMethod; ActualParentInstance: IParent; ChildInterfaceValue: TValue; ParentInterfaceValue: TValue; begin ctx := TRttiContext.Create; // Instantiation ActualParentInstance := TChild.Create as IParent; {$define WORKAROUND} {$ifdef WORKAROUND} InterfaceType := ctx.GetType(TypeInfo(IParent)); InterfaceType := ctx.GetType(TypeInfo(IChild)); {$endif} // Fetch interface type InterfaceType := ctx.FindType('mynamespace.IParent'); // This cast is OK and ChildMethod is executed (ActualParentInstance as IChild).ChildMethod(100); // Create a TValue holding the interface TValue.Make(@ActualParentInstance, InterfaceType.Handle, ParentInterfaceValue); InterfaceType := ctx.FindType('mynamespace.IChild'); // This cast doesn't work if ParentInterfaceValue.TryCast(InterfaceType.Handle, ChildInterfaceValue) then begin Method := InterfaceType.GetMethod('ChildMethod'); if (Method <> nil) then begin Method.Invoke(ChildInterfaceValue, [100]); end; end; ReadLn; end. The contents of mynamespace.pas is as follows: {$M+} IParent = interface ['{2375F59E-D432-4D7D-8D62-768F4225FFD1}'] procedure ParentMethod(const Id: integer); end; {$M-} IChild = interface(IParent) ['{6F89487E-5BB7-42FC-A760-38DA2329E0C5}'] procedure ChildMethod(const Id: integer); end; TParent = class(TInterfacedObject, IParent) public procedure ParentMethod(const Id: integer); end; TChild = class(TParent, IChild) public procedure ChildMethod(const Id: integer); end; For completeness, the implementation goes as procedure TParent.ParentMethod(const Id: integer); begin WriteLn('ParentMethod executed. Id is ' + IntToStr(Id)); end; procedure TChild.ChildMethod(const Id: integer); begin WriteLn('ChildMethod executed. Id is ' + IntToStr(Id)); end; The reason for {$define WORKAROUND} may be found in this post. Question: is there any way for me to make the desired type cast using RTTI? In other words: is there a way for me to invoke IChild.ChildMethod from knowing 1) the qualified name of IChild as a string, and 2) a reference to the TChild instance as a IParent interface? (After all, the hard-coded cast works fine. Is this even possible?) Thanks!

  Read the article

< Previous Page | 480 481 482 483 484 485 486 487 488 489 490 491  | Next Page >