of note - Page 485 - Developer IT

How to Use RDA to Generate WLS Thread Dumps At Specified Intervals?

- by Daniel Mortimer

Introduction There are many ways to generate a thread dump of a WebLogic Managed Server. For example, take a look at: Taking Thread Dumps - [an excellent blog post on the Middleware Magic site]or Different ways to take thread dumps in WebLogic Server (Document 1098691.1) There is another method - use Remote Diagnostic Agent! The solution described below is not documented, but it is relatively straightforward to execute. One advantage of using RDA to collect the thread dumps is RDA will also collect configuration, log files, network, system, performance information at the same time. Instructions 1. Not familiar with Remote Diagnostic Agent? Take a look at my previous blog "Resolve SRs Faster Using RDA - Find the Right Profile" 2. Choose a profile, which includes the WebLogic Server data collection modules (for example the profile "WebLogicServer"). At RDA setup time you should see the prompt below: ------------------------------------------------------------------------------- S301WLS: Collects Oracle WebLogic Server Information ------------------------------------------------------------------------------- Enter the location of the directory where the domains to analyze are located (For example in UNIX, <BEA Home>/user_projects/domains or <Middleware Home>/user_projects/domains) Hit 'Return' to accept the default (/oracle/11AS/Middleware/user_projects/domains) > For a successful WLS connection, ensure that the domain Admin Server is up and running. Data Collection Type: 1 Collect for a single server (offline mode) 2 Collect for a single server (using WLS connection) 3 Collect for multiple servers (using WLS connection) Enter the item number Hit 'Return' to accept the default (1) > 2 Choose option 2 or 3. Note: Collect for a single server or multiple servers using WLS connection means that RDA will attempt to connect to execute online WLST commands against the targeted server(s). The thread dumps are collected using the WLST function - "threadDumps()". If WLST cannot connect to the managed server, RDA will proceed to collect other data and ignore the request to collect thread dumps. If in the final output you see no Thread Dump menu item, then it's likely that the managed server is in a state which prevents new connections to it. If faced with this scenario, you would have to employ alternative methods for collecting thread dumps. 3. The RDA setup will create a setup.cfg file in the RDA_HOME directory. Open this file in an editor. You will find the following parameters which govern the number of thread dumps and thread dump interval. #N.Number of thread dumps to capture WREQ_THREAD_DUMP=10 #N.Thread dump interval WREQ_THREAD_DUMP_INTERVAL=5000 The example lines above show the default settings. In other words, RDA will collect 10 thread dumps at 5000 millisecond (5 second) intervals. You may want to change this to something like: #N.Number of thread dumps to capture WREQ_THREAD_DUMP=10 #N.Thread dump interval WREQ_THREAD_DUMP_INTERVAL=30000 However, bear in mind, that such change will increase the total amount of time it takes for RDA to complete its run. 4. Once you are happy with the setup.cfg, run RDA. RDA will collect, render, generate and package all files in the output directory. 5. For ease of viewing, open up the RDA Start html file - "xxxx__start.htm". The thread dumps can be found under the WLST Collections for the target managed server(s). See screenshots belowScreenshot 1:RDA Start Page - Main Index Screenshot 2: Managed Server Sub Index Screenshot 3: WLST Collections Screenshot 4: Thread Dump Page - List of dump file links Screenshot 5: Thread Dump Dat File Link Additional Comment: A) You can view the thread dump files within the RDA Start Page framework, but most likely you will want to download the dat files for in-depth analysis via thread dump analysis tools such as: Thread Dump Analyzer - Samurai - a GUI based tail , thread dump analysis tool If you are new to thread dump analysis - take a look at this recorded Support Advisor Webcast Oracle WebLogic Server: Diagnosing Performance Issues through Java Thread Dumps[Slidedeck from webcast in PDF format]B) I have logged a couple of enhancement requests for the RDA Development Team to consider: Add timestamp to dump file links, dat filename and at the top of the body of the dat file Package the individual thread dumps in a zip so all dump files can be conveniently downloaded in one go.

Read the article

Upcoming User Group Events in 2011

- by john.orourke(at)oracle.com

At a recent customer event, someone asked me if Oracle had any plans to re-create the Hyperion Solutions Conference. Unfortunately the answer is no. With so many different product lines it would be challenging and costly for Oracle to run separate user conferences for every product line, and it would create too many events for customers with multiple products to attend. So Oracle Open World is the company's main event for showcasing what's new and what's coming across all product lines. If customers find Oracle OpenWorld too overwhelming or if the timing is bad, there are a number of other conferences, which are run by Oracle user groups and include a number of sessions focused on Oracle Hyperion EPM and BI products. Here's a sneak preview of what's coming up for conferences in 2011 where you can network with other Hyperion users and learn what's new and what's coming in our products. Alliance 2011: This conference is run by the Oracle Higher Education User Group (HEUG). It's being held March 27 - 30th in lovely Denver, Colorado. (a great location and time for skiers!) This event is targeted at customers in Higher Education and Public Sector organizations and is expecting to draw over 3,500 attendees. There will be a number of sessions focusing on Oracle Hyperion EPM and BI products in the Budgeting track, as well as the Reporting & BI track. This includes product-focused sessions delivered by Oracle and partners, as well as case studies delivered by customers. Here's a link to the registration page where you can get more information: http://www.heug.org/p/cm/ld/fid=255 Collaborate 2011: This conference is run by three different user groups; OAUG, IOUG and Quest. It's being held April 10 - 14th in sunny Orlando, Florida. (yes, sunshine and warmth!) This event is targeted to customers with Oracle E-Business Suite, PeopleSoft, JD Edwards, Hyperion, Primavera and other products and is expected to draw over 5,000 attendees. You'll find a number of sessions focused on Oracle Hyperion EPM and BI products in the BI/Data Warehousing/EPM track. This includes product-focused sessions delivered by Oracle, our partners, and customers as well as a number of customer case studies. There will also be an exhibit area with a number of demo pods focused on EPM and BI products. Here's a link to the conference web site where you can get more information: http://collaborate.oaug.org/ Also, please note that the OAUG has a Hyperion SIG that runs focused EPM/Hyperion events throughout the year. Here's a link to their web site where you can get more information: http://hyperionsig.oaug.org/ Kscope 2011: Formerly the Kaleidoscope conference, this one is run by the Oracle Developer Tools User Group (ODTUG). This conference is being held June 26 - 30th in Long Beach, CA. (surf's up!) Historically, this event has focused on Oracle Development tools, but over the past few years the EPM and BI content has grown with over 100 sessions planned this year. So this event is becoming a great venue for existing Hyperion customers to learn about the latest developments with Oracle Essbase, Hyperion Planning, Hyperion Financial Management, Oracle BI and other products. You'll also find hands-on workshops, product demonstrations as well as EPM and BI Symposiums run by Oracle Development staff. Here's a link to the web site where you can get more details. http://www.kscope11.com/biepm UKOUG Conference Series: EPM and Hyperion 2011: For Hyperion customers in the UK, the UKOUG has a Hyperion SIG that runs a focused conference for EPM and Hyperion products. The 2011 event is planned for June in London. Here's a link to the web site for this event where you can get more information: http://hyperion.ukoug.org/default.asp?p=8461 In addition to these conferences, you can also find Oracle EPM and BI content at regional user group meetings globally as well as Marketing events run by Oracle. Check the events page at www.oracle.com for the details on upcoming Marketing and regional User Group events. So while Oracle will not be trying to replicate the Hyperion Solutions conference, the good news is that there are a number of other events available where customers can find out what's new and what's coming with Oracle EPM and BI products. And these events are running at different times of the year in different locations - so you can pick the event that makes the most sense for your company from a timing and location standpoint. I'll be delivering a number of sessions at the Alliance and Collaborate conferences and hope to see many of our loyal customers and partners at these events. And there's always Oracle OpenWorld coming up in October, for which the planning has already started. I look forward to seeing you in 2011.

Read the article

Fun With the Chrome JavaScript Console and the Pluralsight Website

- by Steve Michelotti

Originally posted on: http://geekswithblogs.net/michelotti/archive/2013/07/24/fun-with-the-chrome-javascript-console-and-the-pluralsight-website.aspxI’m currently working on my third course for Pluralsight. Everyone already knows that Scott Allen is a “dominating force” for Pluralsight but I was curious how many courses other authors have published as well. The Pluralsight Authors page - http://pluralsight.com/training/Authors – shows all 146 authors and you can click on any author’s page to see how many (and which) courses they have authored. The problem is: I don’t want to have to click into 146 pages to get a count for each author. With this in mind, I figured I could write a little JavaScript using the Chrome JavaScript console to do some “detective work.” My first step was to figure out how the HTML was structured on this page so I could do some screen-scraping. Right-click the first author - “Inspect Element”. I can see there is a primary <div> with a class of “main” which contains all the authors. Each author is in an <h3> with an <a> tag containing their name and link to their page: This web page already has jQuery loaded so I can use $ directly from the console. This allows me to just use jQuery to inspect items on the current page. Notice this is a multi-line command. In order to use multiple lines in the console you have to press SHIFT-ENTER to go to the next line: Now I can see I’m extracting data just fine. At this point I want to follow each URL. Then I want to screen-scrape this next page to see how many courses each author has done. Let’s take a look at the author detail page: I can see we have a table (with a css class of “course”) that contains rows for each course authored. This means I can get the number of courses pretty easily like this: Now I can put this all together. Back on the authors page, I want to follow each URL, extract the returned HTML, and grab the count. In the code below, I simply use the jQuery $.get() method to get the author detail page and the “data” variable that is in the callback contains the HTML. A nice feature of jQuery is that I can simply put this HTML string inside of $() and I can use jQuery selectors directly on it in conjunction with the find() method: Now I’m getting somewhere. I have every Pluralsight author and how many courses each one has authored. But that’s not quite what I’m after – what I want to see are the authors that have the MOST courses in the library. What I’d like to do is to put all of the data in an array and then sort that array descending by number of courses. I can add an item to the array after each author detail page is returned but the catch here is that I can’t perform the sort operation until ALL of the author detail pages have executed. The jQuery $.get() method is naturally an async method so I essentially have 146 async calls and I don’t want to perform my sort action until ALL have completed (side note: don’t run this script too many times or the Pluralsight servers might think your an evil hacker attempting a DoS attack and deny you). My C# brain wants to use a WaitHandle WaitAll() method here but this is JavaScript. I was able to do this by using the jQuery Deferred() object. I create a new deferred object for each request and push it onto a deferred array. After each request is complete, I signal completion by calling the resolve() method. Finally, I use a $.when.apply() method to execute my descending sort operation once all requests are complete. Here is my complete console command: 1: var authorList = [], 2: defList = []; 3: $(".main h3 a").each(function() { 4: var def = $.Deferred(); 5: defList.push(def); 6: var authorName = $(this).text(); 7: var authorUrl = $(this).attr('href'); 8: $.get(authorUrl, function(data) { 9: var courseCount = $(data).find("table.course tbody tr").length; 10: authorList.push({ name: authorName, numberOfCourses: courseCount }); 11: def.resolve(); 12: }); 13: }); 14: $.when.apply($, defList).then(function() { 15: console.log("*Everything* is complete"); 16: var sortedList = authorList.sort(function(obj1, obj2) { 17: return obj2.numberOfCourses - obj1.numberOfCourses; 18: }); 19: for (var i = 0; i < sortedList.length; i++) { 20: console.log(authorList[i]); 21: } 22: }); And here are the results: WOW! John Sonmez has 44 courses!! And Matt Milner has 29! I guess Scott Allen isn’t the only “dominating force”. I would have assumed Scott Allen was #1 but he comes in as #3 in total course count (of course Scott has 11 courses in the Top 50, and 14 in the Top 100 which is incredible!). Given that I’m in the middle of producing only my third course, I better get to work!

Read the article

User-Defined Customer Events & their impact (FA Type Profile)

- by Rajesh Sharma

CC&B automatically creates field activities when a specific Customer Event takes place. This depends on the way you have setup your Field Activity Type Profiles, the templates within, and associated SP Condition(s) on the template. CC&B uses the service point type, its state and referenced customer event to determine which field activity type to generate. Customer events available in the base product include: Cut for Non-payment (CNP) Disconnect Warning (DIWA) Reconnect for Payment (REPY) Reread (RERD) Stop Service (STOP) Start Service (STRT) Start/Stop (STSP) Note the Field values/codes defined for each event. CC&B comes with a flexibility to define new set of customer events. These can be defined in the Look Up - CUST_EVT_FLG. Values from the Look Up are used on the Field Activity Type Profile Template page. So what's the use of having user-defined Customer Events? And how will the system detect such events in order to create field activity(s)? Well, system can only detect such events when you reference a user-defined customer event on a Severance Event Type for an event type Create Field Activities. This way you can create additional field activities of a specific field activity type for user-defined customer events. One of our customers adopted this feature and created a user-defined customer event CNPW - Cut for Non-payment for Water Services. This event was then linked on a Field Activity Type Profile and referenced on a Severance Event - CUT FOR NON PAY-W. The associated Severance Process was configured to trigger a reconnection process if it was cancelled (done by defining a Post Cancel Algorithm). Whenever this Severance Event was executed, a specific type of Field Activity was generated for disconnection purposes. The Field Activity type was determined by the system from the Field Activity Type Profile referenced for the SP Type, SP's state and the referenced user-defined customer event. All was working well until the time when they realized that in spite of the Severance Process getting cancelled (when a payment was made); the Post Cancel Algorithm was not executed to start a Reconnection Severance Process for the purpose of generating a reconnection field activity and reconnecting the service. Basically, the Post Cancel algorithm (if specified on a Severance Process Template) is triggered when a Severance Process gets cancelled because a credit transaction has affected/relieved a Service Agreement's debt. So what exactly was happening? Now we come to actual question as to what is the impact in having a user-defined customer event. System defined/base customer events are hard-coded across the entire system. There is an impact even if you remove any customer event entry from the Look Up. User-defined customer events are not recognized by the system anywhere else except in the severance process, as described above. There are few programs which have routines to first validate the completion of disconnection field activities, which were raised as a result of customer event CNP - Cut for Non-payment in order to perform other associated actions. One such program is the Post Cancel Algorithm, referenced on a Severance Process Template, generally used to reconnect services which were disconnected from other Severance Event, specifically CNP - Cut for Non-Payment. Post cancel algorithm provided by the product - SEV POST CAN does the following (below is the algorithm's description): This algorithm is called after a severance process has been cancelled (typically because the debt was paid and the SA is no longer eligible to be on the severance process). It checks to see if the process has a completed 'disconnect' event and, if so, starts a reconnect process using the Reconnect Severance Process Template defined in the parameter. Notice the underlined text. This algorithm implicitly checks for Field Activities having completed status, which were generated from Severance Events as a result of CNP - Cut for Non-payment customer event. Now if we look back to the customer's issue, we can relate that the Post Cancel algorithm was triggered, but was not able to find any 'Completed' CNP - Cut for Non-payment related field activity. And hence was not able to start a reconnection severance process. This was because a field activity was generated and completed for a customer event CNPW - Cut for Non-payment of Water Services instead. To conclude, if you introduce new customer events that extend or simulate base customer events, the ones that are included in the base product, ensure that there is no other impact either direct or indirect to other business functions that the application has to offer.

Read the article

Architect Day: Boston - Agenda Update

- by Bob Rhubart

Here's the latest information on the session schedule and content for Oracle Technology Network Architect Day in Boston, MA on September 12, 2012. Registration is open, but seating is limited. When: September 12, 2012 8:30am – 5:00pm Where: Boston Marriott Burlington One Burlington Mall Road Burlington, MA 01803 Register now Agenda Time Session Title Room 8:30 am - 9:00 am Registration and Continental Breakfast Salon E Foyer 9:00 am - 9:15 am Welcome and Opening Comments | Bob Rhubart Salon E 9:15 am - 10:00 am Engineered Systems: Oracle's Vision for the Future | Ralf Dossmann Oracle's Exadata and Exalogic are impressive products in their own right. But working in combination they deliver unparalleled transaction processing performance with up to a 30x increase over existing legacy systems, with the lowest cost of ownership over a 3 or 5 year basis than any other hardware. In this session you'll learn how to leverage Oracle's Engineered Systems within your enterprise to deliver record-breaking performance at the lowest TCO. Salon E 10:00 am - 10:30 am Securing Public and Private Clouds | Anton Nielsen Long before the term "Cloud Computing" existed, Oracle technologies supported and promoted the concept. Centralized data with remote users has been at the core of these technologies for decades. The public cloud, and extending private clouds to the internet, though, has added security challenges never imagined decades ago. This presentation will examine a real life security breach and introduce architecture, technologies and policies to secure public and private clouds. Salon E 10:30 am - 10:45 am Break 10:45 am - 11:30 am Breakout Sessions (pick one) Cloud Computing - Making IT Simple | Scott Mattoon The road to Cloud Computing is not without a few bumps. This session will help to smooth out your journey by tackling some of the potential complications. We'll examine whether standardization is a prerequisite for the Cloud. We'll look at why refactoring isn't just for application code. We'll check out deployable entities and their simplification via higher levels of abstraction. And we'll close out the session with a look at engineered systems and modular clouds. Salon E Innovations in Grid Computing with Oracle Coherence | Rob Misek Learn how Coherence can increase the availability, scalability and performance of your existing applications with its advanced low-latency data-grid technologies. Also hear some interesting industry-specific use cases that customers had implemented and how Oracle is integrating Coherence into its Enterprise Java stack. Salon C 11:30 am - 12:15 pm Breakout Sessions (pick one) Enterprise Strategy for Cloud Security | Dave Chappelle Security is high on the list of concerns for many organizations as they evaluate their cloud computing options. This session will examine security in the context of the various forms of cloud computing. We'll consider technical and non-technical aspects of security, and discuss several strategies for cloud computing, from both the consumer and producer perspectives. Salon E Oracle Enterprise Manager | Avi Huber Much more than a DB management tool, Oracle Enterprise Manager provides management and monitoring coverage for the entire Oracle stack, and beyond. This session will concentrate on the middleware management functionality in OEM, starting with Real User Experience monitoring, through AppServer management, and into deep-dive Java diagnostics. We’ll discuss Business Driven Application Management (BDAM) and the benefits of top-down monitoring. Lastly, we’ll demonstrate how to trace a specific user experience problem, through a multitier SOA application, to its root cause, deep in the JVM. Salon C 12:15 pm - 1:15 pm Lunch Salon E Foyer 1:15 pm - 2:00 pm Panel Discussion - Q&A with session speakers Salon E 2:00 pm - 2:45 pm Breakout Sessions (pick one) Oracle Cloud Reference Architecture | Anbu Krishnaswamy Cloud initiatives are beginning to dominate enterprise IT roadmaps. Successful adoption of Cloud and the subsequent governance challenges warrant a Cloud reference architecture that is applied consistently across the enterprise. This presentation will answer the important questions: What exactly is a Cloud, why you need it, what changes it will bring to the enterprise, and what are the key capabilities of a Cloud infrastructure are - using Oracle's Cloud Reference Architecture, which is part of the IT Strategies from Oracle (ITSO) Cloud Enterprise Technology Strategy (ETS). Salon E 21st Century SOA | Peter Belknap Service Oriented Architecture has evolved from concept to reality in the last decade. The right methodology coupled with mature SOA technologies has helped customers demonstrate success in both innovation and ROI. In this session you will learn how Oracle SOA Suite's orchestration, virtualization, and governance capabilities provide the infrastructure to run mission critical business and system applications. And we'll take a special look at the convergence of SOA & BPM using Oracle's Unified technology stack. Salon C 2:45 pm - 3:00 pm Break 3:00 pm - 4:00 pm Roundtable Discussion Salon E 4:00 pm - 4:15 pm Closing Comments & Readouts from Roundtables Salon E 4:15 pm - 5:00 pm Networking / Reception Salon E Foyer Note: Session schedule and content subject to change.

Read the article

Adventures in Windows 8: Understanding and debugging design time data in Expression Blend

- by Laurent Bugnion

One of my favorite features in Expression Blend is the ability to attach a Visual Studio debugger to Blend. First let’s start by answering the question: why exactly do you want to do that? Note: If you are familiar with the creation and usage of design time data, feel free to scroll down to the paragraph titled “When design time data fails”. Creating design time data for your app When a designer works on an app, he needs to see something to design. For “static” UI such as buttons, backgrounds, etc, the user interface elements are going to show up in Blend just fine. If however the data is fetched dynamically from a service (web, database, etc) or created dynamically, most probably Blend is going to show just an empty element. The classical way to design at that stage is to run the application, navigate to the screen that is under construction (which can involve delays, need to log in, etc…), to measure what is on the screen (colors, margins, width and height, etc) using various tools, going back to Blend, editing the properties of the elements, running again, etc. Obviously this is not ideal. The solution is to create design time data. For more information about the creation of design time data by mocking services, you can refer to two talks of mine “Deep dive MVVM” and “MVVM Applied From Silverlight to Windows Phone to Windows 8”. The source code for these talks is here and here. Design time data in MVVM Light One of the main reasons why I developed MVVM Light is to facilitate the creation of design time data. To illustrate this, let’s create a new MVVM Light application in Visual Studio. Install MVVM Light from here: http://mvvmlight.codeplex.com (use the MSI in the Download section). After installing, make sure to read the Readme that opens up in your favorite browser, you will need one more step to install the Project Templates. Start Visual Studio 2012. Create a new MvvmLight (Win8) app. Run the application. You will see a string showing “Welcome to MVVM Light”. In the Solution explorer, right click on MainPage.xaml and select Open in Blend. Now you should see “Welcome to MVVM Light [Design]” What happens here is that Expression Blend runs different code at design time than the application runs at runtime. To do this, we use design-time detection (as explained in a previous article) and use that information to initialize a different data service at design time. To understand this better, open the ViewModelLocator.cs file in the ViewModel folder and see how the DesignDataService is used at design time, while the DataService is used at runtime. In a real-life applicationm, DataService would be used to connect to a web service, for instance. When design time data fails Sometimes however, the creation of design time data fails. It can be very difficult to understand exactly what is happening. Expression Blend is not giving a lot of information about what happened. Thankfully, we can use a trick: Attaching a debugger to Expression Blend and debug the design time code. In WPF and Silverlight (including Windows Phone 7), you could simply attach the debugger to Blend.exe (using the “Managed (v4.5, v4.0) code” option even for Silverlight!!) In Windows 8 however, things are just a bit different. This is because the designer that renders the actual representation of the Windows 8 app runs in its own process. Let’s illustrate that: Open the file DesignDataService in the Design folder. Modify the GetData method to look like this: public void GetData(Action<DataItem, Exception> callback) { throw new Exception(); // Use this to create design time data var item = new DataItem("Welcome to MVVM Light [design]"); callback(item, null); } Go to Blend and build the application. The build succeeds, but now the page is empty. The creation of the design time data failed, but we don’t get a warning message. We need to investigate what’s wrong. Close MainPage.xaml Go to Visual Studio and select the menu Debug, Attach to Process. Update: Make sure that you select “Managed (v4.5, v4.0) code” in the “Attach to” field. Find the process named XDesProc.exe. You should have at least two, one for the Visual Studio 2012 designer surface, and one for Expression Blend. Unfortunately in this screen it is not obvious which is which. Let’s find out in the Task Manager. Press Ctrl-Alt-Del and select Task Manager Go to the Details tab and sort the processes by name. Find the one that says “Blend for Microsoft Visual Studio 2012 XAML UI Designer” and write down the process ID. Go back to the Attach to Process dialog in Visual Studio. sort the processes by ID and attach the debugger to the correct instance of XDesProc.exe. Open the MainViewModel (in the ViewModel folder) Place a breakpoint on the first line of the MainViewModel constructor. Go to Blend and open the MainPage.xaml again. At this point, the debugger breaks in Visual Studio and you can execute your code step by step. Simply step inside the dataservice call, and find the exception that you had placed there. Visual Studio gives you additional information which helps you to solve the issue. More info and Conclusion I want to thank the amazing people on the Expression Blend team for being very fast in guiding me in that matter and encouraging me to blog about it. More information about the XDesProc.exe process can be found here. I had to work on a Windows 8 app for a few days without design time data because of an Exception thrown somewhere in the code, and it was really painful. With the debugger, finding the issue was a simple matter of stepping into the code until it threw the exception. Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

Read the article

What's New In 11.1.2.1 (Talleyrand SP1)

- by russ.bishop

This release is primarily about bug fixes and that's what we spent the most time on, but we also addressed a number of other things: 1. Performance improvements We've done a lot of work to improve the performance of page load and execution times. For example, the View Compare page is about half the size it was previously! We've also done a lot of work on the server to improve performance of queries, exports, action scripts, etc. We implemented some finer-grained locking so fewer operations will block other users while they are in progress. We made some optimizations to improve performance when you have a lot of network or database latency as well. Just a few examples: An Import that previously took 8 GB of memory and hours to complete now runs in about 30 minutes and never takes more than 1 GB of RAM. Searching by exact Node Name now completes within 2 seconds even for a hierarchy with millions of nodes. Another search that was taking 30 seconds to run now completes in less than 5 seconds. 2. Upgrade support This release supports automatic upgrade from previous releases, built right into the console. 3. Console Improvements The Console has been reorganized and made easier to use. It is also much more multi-threaded so it responds quicker without freezing up when you save changes or when it needs to get status. 4. Property Namespaces Properties now have a concept called a Namespace. This is tied into the Application Templates to prevent conflicts with duplicate property names. Right now, if you have an AccountType and you pull in the HFM template, it also has AccountType so you end up creating properties with decorations on the name like "Account Type (HFM)". This is no longer necessary. In addition, properties within a namespace must have unique labels but they can be duplicated across namespaces. So in the Property Grid when you click on the HFM category, you just see "AccountType". When you click on MyCategory, you see "AccountType", but they are different properties with different values. Within formulas, the names are still unique (eg: Custom.AccountType vs HFM.AccountType). I'll write more about this one later. 5. Single Sign On DRM now supports Single Sign-On via HSS. For example, if you are using Oracle's OAM as your SSO solution then you configure HSS to use OAM just like you would before. You also configure DRM to use HSS, again just like before. Then you configure OAM to protect the DRM web app, like you would any other website. However once you do those things, users are no longer prompted to enter their username/password. They simply get redirected to OAM if they don't already have a login token, otherwise they pick their application and sail right into DRM. You can also avoid having to pick an application (see the next item) 6. URL-based navigation You can now specify the application you want to log into via the URL. Combined with SSO and your Intranet, it becomes easy to provide links on our intranet portal that take users directly into a specific DRM application. We also support specifying the Version, Hierarchy, and Node. Again, this can be used on your internal portal, but the scenarios get even more interesting when you are using workflow like Oracle BPEL you can automatically generate links within emails that will take users directly to a specific node in the UI. 7. Job status and cancellation A lot of the jobs now report their status and support true cancellation. Action Scripts also report a progress complete percentage since the amount of work is known ahead of time. 8. Action Script Options Action scripts support Option declarations at the top of the file so a script can self-describe (when specified in the file, the corresponding item in the file is ignored). For example: Option|DetectDelimiter Option|UsePropertyNames|true This will tell DRM to automatically detect the delimiter (a pipe symbol in this case) and that all references to properties are by Name, not by Label. Note that when you load a script in the UI, if you use Labels we automatically try to match them up if they are unique. Any duplicates are indicated and you are presented with a choice to pick which property you actually referred to. This is somewhat similar to Version substitution, but tailored for properties. There are other more minor changes and like I said earlier a lot of bug fixes and performance improvements. Hopefully I will get a chance to dig into some of these things in future blog posts.

Read the article

Running a Mongo Replica Set on Azure VM Roles

- by Elton Stoneman

Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/10/15/running-a-mongo-replica-set-on-azure-vm-roles.aspxSetting up a MongoDB Replica Set with a bunch of Azure VMs is straightforward stuff. Here’s a step-by-step which gets you from 0 to fully-redundant 3-node document database in about 30 minutes (most of which will be spent waiting for VMs to fire up). First, create yourself 3 VM roles, which is the minimum number of nodes you need for high availability. You can use any OS that Mongo supports. This guide uses Windows but the only difference will be the mechanism for starting the Mongo service when the VM starts (Windows Service, daemon etc.) While the VMs are provisioning, download and install Mongo locally, so you can set up the replica set with the Mongo shell. We’ll create our replica set from scratch, doing one machine at a time (if you have a single node you want to upgrade to a replica set, it’s the same from step 3 onwards): 1. Setup Mongo Log into the first node, download mongo and unzip it to C:. Rename the folder to remove the version – so you have c:\MongoDB\bin etc. – and create a new folder for the logs, c:\MongoDB\logs. 2. Setup your data disk When you initialize a node in a replica set, Mongo pre-allocates a whole chunk of storage to use for data replication. It will use up to 5% of your data disk, so if you use a Windows VM image with a defsault 120Gb disk and host your data on C:, then Mongo will allocate 6Gb for replication. And that takes a while. Instead you can create yourself a new partition by shrinking down the C: drive in Computer Management, by say 10Gb, and then creating a new logical disk for your data from that spare 10Gb, which will be allocated as E:. Create a new folder, e:\data. 3. Start Mongo When that’s done, start a command line, point to the mongo binaries folder, install Mongo as a Windows Service, running in replica set mode, and start the service: cd c:\mongodb\bin mongod -logpath c:\mongodb\logs\mongod.log -dbpath e:\data -replSet TheReplicaSet –install net start mongodb 4. Open the ports Mongo uses port 27017 by default, so you need to allow access in the machine and in Azure. In the VM, open Windows Firewall and create a new inbound rule to allow access via port 27017. Then in the Azure Management Console for the VM role, under the Configure tab add a new rule, again to allow port 27017. 5. Initialise the replica set Start up your local mongo shell, connecting to your Azure VM, and initiate the replica set: c:\mongodb\bin\mongo sc-xyz-db1.cloudapp.net rs.initiate() This is the bit where the new node (at this point the only node) allocates its replication files, so if your data disk is large, this can take a long time (if you’re using the default C: drive with 120Gb, it may take so long that rs.initiate() never responds. If you’re sat waiting more than 20 minutes, start another instance of the mongo shell pointing to the same machine to check on it). Run rs.conf() and you should see one node configured. 6. Fix the host name for the primary – *don’t miss this one* For the first node in the replica set, Mongo on Windows doesn’t populate the full machine name. Run rs.conf() and the name of the primary is sc-xyz-db1, which isn’t accessible to the outside world. The replica set configuration needs the full DNS name of every node, so you need to manually rename it in your shell, which you can do like this: cfg = rs.conf() cfg.members[0].host = ‘sc-xyz-db1.cloudapp.net:27017’ rs.reconfig(cfg) When that returns, rs.conf() will have your full DNS name for the primary, and the other nodes will be able to connect. At this point you have a working database, so you can start adding documents, but there’s no replication yet. 7. Add more nodes For the next two VMs, follow steps 1 through to 4, which will give you a working Mongo database on each node, which you can add to the replica set from the shell with rs.add(), using the full DNS name of the new node and the port you’re using: rs.add(‘sc-xyz-db2.cloudapp.net:27017’) Run rs.status() and you’ll see your new node in STARTUP2 state, which means its initializing and replicating from the PRIMARY. Repeat for your third node: rs.add(‘sc-xyz-db3.cloudapp.net:27017’) When all nodes are finished initializing, you will have a PRIMARY and two SECONDARY nodes showing in rs.status(). Now you have high availability, so you can happily stop db1, and one of the other nodes will become the PRIMARY with no loss of data or service. Note – the process for AWS EC2 is exactly the same, but with one important difference. On the Azure Windows Server 2012 base image, the MongoDB release for 64-bit 2008R2+ works fine, but on the base 2012 AMI that release keeps failing with a UAC permission error. The standard 64-bit release is fine, but it lacks some optimizations that are in the 2008R2+ version.

Read the article

WebCenter Content shared folders for clustering

- by Kyle Hatlestad

When configuring a WebCenter Content (WCC) cluster, one of the things which makes it unique from some other WebLogic Server applications is its requirement for a shared file system. This is actually not any different then 10g and previous versions of UCM when it ran directly on a JVM. And while it is simple enough to say it needs a shared file system, there are some crucial details in how those directories are configured. And if they aren't followed, you may result in some unwanted behavior. This blog post will go into the details on how exactly the file systems should be split and what options are required. Beyond documents being stored on the file system and/or database and metadata being stored in the database along with other structured data, there is other information being read and written to on the file system. Information such as user profile preferences, workflow item state information, metadata profiles, and other details are stored in files. In addition, for certain processes within WCC, each of the nodes needs to know what the other nodes are doing so they don’t step on each other. WCC keeps track of this through the use of lock files on the file system. Because of this, each node of the WCC must have access to the same file system just as they have access to the same database. WCC uses its own locking mechanism using files, so it also needs to have access to those files without file attribute caching and without locking being done by the client (node). If one of the nodes accesses a certain status file and it happens to be cached, that node might attempt to run a process which another node is already working on. Or if a particular file is locked by one of the node clients, this could interfere with access by another node. Unfortunately, when disabling file attribute caching on the file share, this can impact performance. So it is important to only disable caching and locking on the particular folders which require it. When configuring WebCenter Content after deploying the domain, it asks for 3 different directories: Content Server Instance Folder, Native File Repository Location, and Weblayout Folder. And starting in PS5, it now asks for the User Profile Folder. Even if you plan on storing the content in the database, you still need to establish a Native File (Vault) and Weblayout directories. These will be used for handling temporary files, cached files, and files used to deliver the UI. For these directories, the only folder which needs to have the file attribute caching and locking disabled is the ‘Content Server Instance Folder’. So when establishing this share through NFS or a clustered file system, be sure to specify those options. For instance, if creating the share through NFS, use the ‘noac’ and ‘nolock’ options for the mount options. For the other directories, caching and locking should be enabled to provide best performance to those locations. These directory path configurations are contained within the <domain dir>\ucm\cs\bin\intradoc.cfg file: #Server System PropertiesIDC_Id=UCM_server1 #Server Directory Variables IdcHomeDir=/u01/fmw/Oracle_ECM1/ucm/idc/ FmwDomainConfigDir=/u01/fmw/user_projects/domains/base_domain/config/fmwconfig/ AppServerJavaHome=/u01/jdk/jdk1.6.0_22/jre/ AppServerJavaUse64Bit=true IntradocDir=/mnt/share_no_cache/base_domain/ucm/cs/ VaultDir=/mnt/share_with_cache/ucm/cs/vault/ WeblayoutDir=/mnt/share_with_cache/ucm/cs/weblayout/ #Server Classpath variables #Additional Variables #NOTE: UserProfilesDir is only available in PS5 – 11.1.1.6.0UserProfilesDir=/mnt/share_with_cache/ucm/cs/data/users/profiles/ In addition to these folder configurations, it’s also recommended to move node-specific folders to local disk to avoid unnecessary traffic to the shared directory. So on each node, go to <domain dir>\ucm\cs\bin\intradoc.cfg and add these additional configuration entries: VaultTempDir=<domain dir>/ucm/<cs>/vault/~temp/ TraceDirectory=<domain dir>/servers/<UCM_serverN>/logs/EventDirectory=<domain dir>/servers/<UCM_serverN>/logs/event/ And of course, don’t forget the cluster-specific configuration values to add as well. These can be added through Admin Server -> General Configuration -> Additional Configuration Variables or directly in the <IntradocDir>/config/config.cfg file: ArchiverDoLocks=true DisableSharedCacheChecking=true ServiceAllowRetry=true (use only with Oracle RAC Database)PublishLockTimeout=300000 (time can vary depending on publishing time and number of nodes) For additional information and details on clustering configuration, I highly recommend reviewing document [1209496.1] on the support site. In addition, there is a great step-by-step guide on setting up a WebCenter Content cluster [1359930.1].

Read the article

SQL SERVER – Recover the Accidentally Renamed Table

- by pinaldave

I have no answer to following question. I saw a desperate email marked as urgent delivered in my mailbox. “I accidentally renamed table in my SSMS. I was scrolling very fast and I made mistakes. It was either because I double clicked or clicked on F2 (shortcut key for renaming). However, I have made the mistake and now I have no idea how to fix this. I am in big trouble. Help me get my original tablename.” I have seen many similar scenarios in my life and they give me a very good opportunity to preach wisdom but when the house is burning, we cannot talk about how we should have conserved the water earlier. The goal at that point is to put off the fire as fast as we can. I decided to answer this email with my best knowledge. If you have renamed the table, I think you pretty much is out of luck. Here are few things which you can do which can give you idea about what your tablename can be if you are lucky. Method 1: (Not Recommended but try your luck) Check your naming convention of your system. I have often seen that many organizations name their index as IX_TableName_Colms or name their keys as FK_TableName1_TableName2_Cols. If your organization is following the same you can get the name from your table, you may refer your keys. Again, note that this is quite possible that your tablename was already renamed and your keys were not updated. This can easily lead you to select incorrect name. I think follow this if you are confident or move to the next method. Method 2: (Not Recommended but try your luck) This method is also based on your orgs naming convention. If you use the name of the table in any columnname (some organizations use tablename in their incremental identity column name), you can get that name from there. Method 3: (Not Recommended but try your luck) If you know where your table was used in your stored procedures, you can script your stored procedure and find the name of the table back. Method 4: (Try your luck) All the best organizations first create a data model of the schema and there is good chance that this table is used there, you should take your chances and refer original document. If your organization is good at managing docs or source code, you will get the name of the table back for sure. Method 5: (It WORKS but try on a development server) There is no sure way to get you the name of the table which you accidentally renamed however, there is one way which will work for sure. You need to take your latest full backup and restore it on your development server (remember not on production or where you have renamed this column). Now restore latest differential file of the full backup. Now restore all the log files one by one making sure that you are restoring before the point of time of you renamed the tablename. Now go to explore and this will give you the name of the table which you have renamed. If you are confident that the same table existed with the same name when the last full backup was made, you do not have to go to all the steps. You can just get the name of the table directly from last backup’s restore. Read the article about Backup Timeline. Wisdom: How can I miss to preach wisdom when I get the opportunity to do so? Here are a few points to remember. Use a different account to explore production environment. Do not use the same account which have all the rights and permissions all the time. Use the account which has read only permissions if there are no modification required. Use policy based management to prevent changes which are accidental. If there was policy of valid names, the accidental change of the table was not possible unless it was intentional delibarate changes. Have a proper auditing of the system in place. You can use DDL triggers but be careful with its usage (get it reviewed properly first). (Add your suggestion here) I guess Method 5 will work all the time (using point in time restore). Everything else is chance of luck and if you are lucky are bad – you will get further incorrect name. Now go back and read the first line of this blog. Out of five method four methods are just lucky guesses. The method 5 will work but again it is a lengthy process if the size of the database is huge or if you do not have full backup. Did I miss anything obvious? Please leave a comment and I will publish your answer with due credit. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Imaging: Paper Paper Everywhere, but None Should be in Sight

- by Kellsey Ruppel

Author: Vikrant Korde, Technical Architect, Aurionpro's Oracle Implementation Services team My wedding photos are stored in several empty shoeboxes. Yes...I got married before digital photography was mainstream...which means I'm old. But my parents are really old. They have shoeboxes filled with vacation photos on slides (I doubt many of you have even seen a home slide projector...and I hope you never do!). Neither me nor my parents should have shoeboxes filled with any form of photographs whatsoever. They should obviously live in the digital world...with no physical versions in sight (other than a few framed on our walls). Businesses grapple with similar challenges. But instead of shoeboxes, they have file cabinets and warehouses jam packed with paper invoices, legal documents, human resource files, material safety data sheets, incident reports, and the list goes on and on. In fact, regulatory and compliance rules govern many industries, requiring that this paperwork is available for any number of years. It's a real challenge...especially trying to find archived documents quickly and many times with no backup. Which brings us to a set of technologies called Image Process Management (or simply Imaging or Image Processing) that are transforming these antiquated, paper-based processes. Oracle's WebCenter Content Imaging solution is a combination of their WebCenter suite, which offers a robust set of content and document management features, and their Business Process Management (BPM) suite, which helps to automate business processes through the definition of workflows and business rules. Overall, the solution provides an enterprise-class platform for end-to-end management of document images within transactional business processes. It's a solution that provides all of the capabilities needed - from document capture and recognition, to imaging and workflow - to effectively transform your ‘shoeboxes’ of files into digitally managed assets that comply with strict industry regulations. The terminology can be quite overwhelming if you're new to the space, so we've provided a summary of the primary components of the solution below, along with a short description of the two paths that can be executed to load images of scanned documents into Oracle's WebCenter suite. WebCenter Imaging (WCI): the electronic document repository that provides security, annotations, and search capabilities, and is the primary user interface for managing work items in the imaging solution SOA & BPM Suites (workflow): provide business process management capabilities, including human tasks, workflow management, service integration, and all other standard SOA features. It's interesting to note that there a number of 'jumpstart' processes available to help accelerate the integration of business applications, such as the accounts payable invoice processing solution for E-Business Suite that facilitates the processing of large volumes of invoices WebCenter Enterprise Capture (WEC): expedites the capture process of paper documents to digital images, offering high volume scanning and importing from email, and allows for flexible indexing options WebCenter Forms Recognition (WFR): automatically recognizes, categorizes, and extracts information from paper documents with greatly reduced human intervention WebCenter Content: the backend content server that provides versioning, security, and content storage There are two paths that can be executed to send data from WebCenter Capture to WebCenter Imaging, both of which are described below: 1. Direct Flow - This is the simplest and quickest way to push an image scanned from WebCenter Enterprise Capture (WEC) to WebCenter Imaging (WCI), using the bare minimum metadata. The WEC activities are defined below: The paper document is scanned (or imported from email). The scanned image is indexed using a predefined indexing profile. The image is committed directly into the process flow 2. WFR (WebCenter Forms Recognition) Flow - This is the more complex process, during which data is extracted from the image using a series of operations including Optical Character Recognition (OCR), Classification, Extraction, and Export. This process creates three files (Tiff, XML, and TXT), which are fed to the WCI Input Agent (the high speed import/filing module). The WCI Input Agent directory is a standard ingestion method for adding content to WebCenter Imaging, the process for doing so is described below: WEC commits the batch using the respective commit profile. A TIFF file is created, passing data through the file name by including values separated by "_" (underscores). WFR completes OCR, classification, extraction, export, and pulls the data from the image. In addition to the TIFF file, which contains the document image, an XML file containing the extracted data, and a TXT file containing the metadata that will be filled in WCI, are also created. All three files are exported to WCI's Input agent directory. Based on previously defined "input masks", the WCI Input Agent will pick up the seeding file (often the TXT file). Finally, the TIFF file is pushed in UCM and a unique web-viewable URL is created. Based on the mapping data read from the TXT file, a new record is created in the WCI application. Although these processes may seem complex, each Oracle component works seamlessly together to achieve a high performing and scalable platform. The solution has been field tested at some of the largest enterprises in the world and has transformed millions and millions of paper-based documents to more easily manageable digital assets. For more information on how an Imaging solution can help your business, please contact [email protected] (for U.S. West inquiries) or [email protected] (for U.S. East inquiries). About the Author: Vikrant is a Technical Architect in Aurionpro's Oracle Implementation Services team, where he delivers WebCenter-based Content and Imaging solutions to Fortune 1000 clients. With more than twelve years of experience designing, developing, and implementing Java-based software solutions, Vikrant was one of the founding members of Aurionpro's WebCenter-based offshore delivery team. He can be reached at [email protected].

Read the article

Branching and Merging Improvements in TFS2010

- by jehan

Introducing the concept of “first class branches” is a significant improvement as part of the 2010 release with respect to version control. Not only does it help to distinguish between folders and branches, but it enables branch visualizations. Let us see improvements in detail. · In TFS2008, you don’t know which of the folders are Branches: All folders looks the same, all have the folder icon. Now, In TFS 2010 there is a new icon that shows which of the folder is a Branch. · There is no visual means to manage branches in TFS2008: You dont have any means to identify which branches are related and the relation type. Now, In TFS 2010 you have visual tools to see the Branches Hierarchy. In order to see a Branch Hierarchy just Right Click the Branch and choose: Branching and Merging –> View Hierarchy · In TFS2008, there is no option to track changes path between the Branches: If you have made a merge in a Branch you can’t track from which Branch this Merge came from. Now, you have the tools that shows the path of change between the Branches, you can also see where change was added on a timeline. In order to track a change do the following: Step1: Right click the Branch and click View History Step 2: Choose a changeset to track and click the “Track Changeset” button. Step 3: Choose the branches that will be in the view and click “Visualize”. In above visual, you can see that Changesets 108,109,110 and 119 where merged from Main to Release1.0 Branch and then “Release_1.0” Branched to “Dev1.0. Step4: You can also see the Merges on a Timeline by clicking on the “Timeline Tracking” button. Creating New Branches: In TFS 2010, the creation of branches has been streamlined a bit from the process in 2008. In 2008, creating a new branch was like every other action in the system – changes were pended on the client, and then checked in to the server. Because of this creating new branch in TFS2008 was time-consuming process. In TFS2010, the step where changes are pended has been bypassed and now performing the branch creation is entirely on the server. With this approach, the round trip time for downloading a copy of each file on the branch and then uploading each file again has been eliminated. Note: In TFS2010, the new branch will be created and committed as a single operation on the server. Pending changes will not be created, it doesn’t require a check-in as it will be carried out as a single operation and it’s not possible to cancel. Manage Branch Permissions: The properties view for branches is also different than that of ordinary folders or file, containing some metadata for the branch, relationship information, and permissions for the branch. In TFS2008, the users who have checkout and Check-in permissions can create a branch. But, In TFS2010 you can control the permissions for Branches using Manage Branch permissions. Reparent option in TFS2010: In TFS2008, if we have two branches which don’t have parent-child relation and we want perform merge between these two branches then we have to perform baseless merge using tf.exe command line. I have two branches Release_1.0 and Dev1.0_F2 which don’t have any relation between them, that’s why when I click on merge option in Release_1.0, in Target Branch it’s not showing Dev1.0_F2 branch to perform the merges. Let us see what can we do for this in TFS2010, first perform a TFS baseless merge to establish a relationship between the parent branch and the child branches. It will only merge the folder, not its contents. TFS baseless merges are performed via the command line using VS2010 command prompt and do the following: tf merge /baseless <ParentBranch> <childBranch> Check in your pending changes. It will create the link between the branches but the relationships are still not completed. Now, select the child branch in Source Control Explorer and from the File menu choose Source Control –> Branching and Merging –> Reparent. In the dialog box, choose the appropriate branch as the new parent. Click Reparent and then go to parent branch and click merge. Now, will see that in Target Branch option Dev1.0_F2 branch is added. Converting Folders to Branches and Branches to Folders: You can convert any Folder as Branch from Context Menu by performing right click on the folderàBranching and MergingàConvert to Branch. In similar way, you can convert the Branches to Folder using Convert to Folder option available in File Menu (FileàSource ControlàBranching and MergingàConvert to Branch). This option is not available in context menu.

Read the article

2D Selective Gaussian Blur

- by Joshua Thomas

I am attempting to use Gaussian blur on a 2D platform game, selectively blurring specific types of platforms with different amounts. I am currently just messing around with simple test code, trying to get it to work correctly. What I need to eventually do is create three separate render targets, leave one normal, blur one slightly, and blur the last heavily, then recombine on the screen. Where I am now is I have successfully drawn into a new render target and performed the gaussian blur on it, but when I draw it back to the screen everything is purple aside from the platforms I drew to the target. This is my .fx file: #define RADIUS 7 #define KERNEL_SIZE (RADIUS * 2 + 1) //----------------------------------------------------------------------------- // Globals. //----------------------------------------------------------------------------- float weights[KERNEL_SIZE]; float2 offsets[KERNEL_SIZE]; //----------------------------------------------------------------------------- // Textures. //----------------------------------------------------------------------------- texture colorMapTexture; sampler2D colorMap = sampler_state { Texture = <colorMapTexture>; MipFilter = Linear; MinFilter = Linear; MagFilter = Linear; }; //----------------------------------------------------------------------------- // Pixel Shaders. //----------------------------------------------------------------------------- float4 PS_GaussianBlur(float2 texCoord : TEXCOORD) : COLOR0 { float4 color = float4(0.0f, 0.0f, 0.0f, 0.0f); for (int i = 0; i < KERNEL_SIZE; ++i) color += tex2D(colorMap, texCoord + offsets[i]) * weights[i]; return color; } //----------------------------------------------------------------------------- // Techniques. //----------------------------------------------------------------------------- technique GaussianBlur { pass { PixelShader = compile ps_2_0 PS_GaussianBlur(); } } This is the code I'm using for the gaussian blur: public Texture2D PerformGaussianBlur(Texture2D srcTexture, RenderTarget2D renderTarget1, RenderTarget2D renderTarget2, SpriteBatch spriteBatch) { if (effect == null) throw new InvalidOperationException("GaussianBlur.fx effect not loaded."); Texture2D outputTexture = null; Rectangle srcRect = new Rectangle(0, 0, srcTexture.Width, srcTexture.Height); Rectangle destRect1 = new Rectangle(0, 0, renderTarget1.Width, renderTarget1.Height); Rectangle destRect2 = new Rectangle(0, 0, renderTarget2.Width, renderTarget2.Height); // Perform horizontal Gaussian blur. game.GraphicsDevice.SetRenderTarget(renderTarget1); effect.CurrentTechnique = effect.Techniques["GaussianBlur"]; effect.Parameters["weights"].SetValue(kernel); effect.Parameters["colorMapTexture"].SetValue(srcTexture); effect.Parameters["offsets"].SetValue(offsetsHoriz); spriteBatch.Begin(0, BlendState.Opaque, null, null, null, effect); spriteBatch.Draw(srcTexture, destRect1, Color.White); spriteBatch.End(); // Perform vertical Gaussian blur. game.GraphicsDevice.SetRenderTarget(renderTarget2); outputTexture = (Texture2D)renderTarget1; effect.Parameters["colorMapTexture"].SetValue(outputTexture); effect.Parameters["offsets"].SetValue(offsetsVert); spriteBatch.Begin(0, BlendState.Opaque, null, null, null, effect); spriteBatch.Draw(outputTexture, destRect2, Color.White); spriteBatch.End(); // Return the Gaussian blurred texture. game.GraphicsDevice.SetRenderTarget(null); outputTexture = (Texture2D)renderTarget2; return outputTexture; } And this is the draw method affected: public void Draw(SpriteBatch spriteBatch) { device.SetRenderTarget(maxBlur); spriteBatch.Begin(); foreach (Brick brick in blueBricks) brick.Draw(spriteBatch); spriteBatch.End(); blue = gBlur.PerformGaussianBlur((Texture2D) maxBlur, helperTarget, maxBlur, spriteBatch); spriteBatch.Begin(); device.SetRenderTarget(null); foreach (Brick brick in redBricks) brick.Draw(spriteBatch); foreach (Brick brick in greenBricks) brick.Draw(spriteBatch); spriteBatch.Draw(blue, new Rectangle(0, 0, blue.Width, blue.Height), Color.White); foreach (Brick brick in purpleBricks) brick.Draw(spriteBatch); spriteBatch.End(); } I'm sorry about the massive brick of text and images(or not....new user, I tried, it said no), but I wanted to get my problem across clearly as I have been searching for an answer to this for quite a while now. As a side note, I have seen the bloom sample. Very well commented, but overly complicated since it deals in 3D; I was unable to take what I needed to learn form it. Thanks for any and all help.

Read the article

Windows Azure Recipe: Software as a Service (SaaS)

- by Clint Edmonson

The cloud was tailor built for aspiring companies to create innovative internet based applications and solutions. Whether you’re a garage startup with very little capital or a Fortune 1000 company, the ability to quickly setup, deliver, and iterate on new products is key to capturing market and mind share. And if you can capture that share and go viral, having resiliency and infinite scale at your finger tips is great peace of mind. Drivers Cost avoidance Time to market Scalability Solution Here’s a sketch of how a basic Software as a Service solution might be built out: Ingredients Web Role – this hosts the core web application. Each web role will host an instance of the software and as the user base grows, additional roles can be spun up to meet demand. Access Control – this service is essential to managing user identity. It’s backed by a full blown implementation of Active Directory and allows the definition and management of users, groups, and roles. A pre-built ASP.NET membership provider is included in the training kit to leverage this capability but it’s also flexible enough to be combined with external Identity providers including Windows LiveID, Google, Yahoo!, and Facebook. The provider model provides extensibility to hook into other industry specific identity providers as well. Databases – nearly every modern SaaS application is backed by a relational database for its core operational data. If the solution is sold to organizations, there’s a good chance multi-tenancy will be needed. An emerging best practice for SaaS applications is to stand up separate SQL Azure database instances for each tenant’s proprietary data to ensure isolation from other tenants. Worker Role – this is the best place to handle autonomous background processing such as data aggregation, billing through external services, and other specialized tasks that can be performed asynchronously. Placing these tasks in a worker role frees the web roles to focus completely on user interaction and data input and provides finer grained control over the system’s scalability and throughput. Caching (optional) – as a web site traffic grows caching can be leveraged to keep frequently used read-only, user specific, and application resource data in a high-speed distributed in-memory for faster response times and ultimately higher scalability without spinning up more web and worker roles. It includes a token based security model that works alongside the Access Control service. Blobs (optional) – depending on the nature of the software, users may be creating or uploading large volumes of heterogeneous data such as documents or rich media. Blob storage provides a scalable, resilient way to store terabytes of user data. The storage facilities can also integrate with the Access Control service to ensure users’ data is delivered securely. Training & Examples These links point to online Windows Azure training labs and examples where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure (16 labs) Windows Azure is an internet-scale cloud computing and services platform hosted in Microsoft data centers, which provides an operating system and a set of developer services which can be used individually or together. It gives developers the choice to build web applications; applications running on connected devices, PCs, or servers; or hybrid solutions offering the best of both worlds. New or enhanced applications can be built using existing skills with the Visual Studio development environment and the .NET Framework. With its standards-based and interoperable approach, the services platform supports multiple internet protocols, including HTTP, REST, SOAP, and plain XML SQL Azure (7 labs) Microsoft SQL Azure delivers on the Microsoft Data Platform vision of extending the SQL Server capabilities to the cloud as web-based services, enabling you to store structured, semi-structured, and unstructured data. Windows Azure Services (9 labs) As applications collaborate across organizational boundaries, ensuring secure transactions across disparate security domains is crucial but difficult to implement. Windows Azure Services provides hosted authentication and access control using powerful, secure, standards-based infrastructure. Developing Applications for the Cloud, 2nd Edition (eBook) This book demonstrates how you can create from scratch a multi-tenant, Software as a Service (SaaS) application to run in the cloud using the latest versions of the Windows Azure Platform and tools. The book is intended for any architect, developer, or information technology (IT) professional who designs, builds, or operates applications and services that run on or interact with the cloud. Fabrikam Shipping (SaaS reference application) This is a full end to end sample scenario which demonstrates how to use the Windows Azure platform for exposing an application as a service. We developed this demo just as you would: we had an existing on-premises sample, Fabrikam Shipping, and we wanted to see what it would take to transform it in a full subscription based solution. The demo you find here is the result of that investigation See my Windows Azure Resource Guide for more guidance on how to get started, including more links web portals, training kits, samples, and blogs related to Windows Azure.

Read the article

How to Play PC Games on Your TV

- by Chris Hoffman

No need to wait for Valve’s Steam Machines — connect your Windows gaming PC to your TV and use powerful PC graphics in the living room today. It’s easy — you don’t need any unusual hardware or special software. This is ideal if you’re already a PC gamer who wants to play your games on a larger screen. It’s also convenient if you want to play multiplayer PC games with controllers in your living rom. HDMI Cables and Controllers You’ll need an HDMI cable to connect your PC to your television. This requires a TV with HDMI-in, a PC with HDMI-out, and an HDMI cable. Modern TVs and PCs have had HDMI built in for years, so you should already be good to go. If you don’t have a spare HDMI cable lying around, you may have to buy one or repurpose one of your existing HDMI cables. Just don’t buy the expensive HDMI cables — even a cheap HDMI cable will work just as well as a more expensive one. Plug one end of the HDMI cable into the HDMI-out port on your PC and one end into the HDMI-In port on your TV. Switch your TV’s input to the appropriate HDMI port and you’ll see your PC’s desktop appear on your TV. Your TV becomes just another external monitor. If you have your TV and PC far away from each other in different rooms, this won’t work. If you have a reasonably powerful laptop, you can just plug that into your TV — or you can unplug your desktop PC and hook it up next to your TV. Now you’ll just need an input device. You probably don’t want to sit directly in front of your TV with a wired keyboard and mouse! A wireless keyboard and wireless mouse can be convenient and may be ideal for some games. However, you’ll probably want a game controller like console players use. Better yet, get multiple game controllers so you can play local-multiplayer PC games with other people. The Xbox 360 controller is the ideal controller for PC gaming. Windows supports these controllers natively, and many PC games are designed specifically for these controllers. Note that Xbox One controllers aren’t yet supported on Windows because Microsoft hasn’t released drivers for them. Yes, you could use a third-party controller or go through the process of pairing a PlayStation controller with your PC using unofficial tools, but it’s better to get an Xbox 360 controller. Just plug one or more Xbox controllers into your PC’s USB ports and they’ll work without any setup required. While many PC games to support controllers, bear in mind that some games require a keyboard and mouse. A TV-Optimized Interface Use Steam’s Big Picture interface to more easily browse and launch games. This interface was designed for using on a television with controllers and even has an integrated web browser you can use with your controller. It will be used on the Valve’s Steam Machine consoles as the default TV interface. You can use a mouse with it too, of course. There’s also nothing stopping you from just using your Windows desktop with a mouse and keyboard — aside from how inconvenient it will be. To launch Big Picture Mode, open Steam and click the Big Picture button at the top-right corner of your screen. You can also press the glowing Xbox logo button in the middle of an Xbox 360 Controller to launch the Big Picture interface if Steam is open. Another Option: In-Home Streaming If you want to leave your PC in one room of your home and play PC games on a TV in a different room, you can consider using local streaming to stream games over your home network from your gaming PC to your television. Bear in mind that the game won’t be as smooth and responsive as it would if you were sitting in front of your PC. You’ll also need a modern router with fast wireless network speeds to keep up with the game streaming. Steam’s built-in In-Home Streaming feature is now available to everyone. You could plug a laptop with less-powerful graphics hardware into your TV and use it to stream games from your powerful desktop gaming rig. You could also use an older desktop PC you have lying around. To stream a game, log into Steam on your gaming PC and log into Steam with the same account on another computer on your home network. You’ll be able to view the library of installed games on your other PC and start streaming them. NVIDIA also has their own GameStream solution that allows you to stream games from a PC with powerful NVIDIA graphics hardware. However, you’ll need an NVIDIA Shield handheld gaming console to do this. At the moment, NVIDIA’s game streaming solution can only stream to the NVIDIA Shield. However, the NVIDIA Shield device can be connected to your TV so you can play that streaming game on your TV. Valve’s Steam Machines are supposed to bring PC gaming to the living room and they’ll do it using HDMI cables, a custom Steam controller, the Big Picture interface, and in-home streaming for compatibility with Windows games. You can do all of this yourself today — you’ll just need an Xbox 360 controller instead of the not-yet-released Steam controller. Image Credit: Marco Arment on Flickr, William Hook on Flickr, Lewis Dowling on Flickr

Read the article

Why do my 512x512 bitmaps look jaggy on Android OpenGL?

- by Milo Mordaunt

This is sort of driving me nuts, I've googled and googled and tried everything I can think of, but my sprites still look super blurry and super jaggy. Example: Here: https://docs.google.com/open?id=0Bx9Gbwnv9Hd2TmpiZkFycUNmRTA If you click through to the actual full size image you should see what I mean, it's like it's taking and average of every 5*5 pixels or something, the background looks really blurry and blocky, but the ball is the worst. The clouds look all right for some reason, probably because they're mostly transparent. I know the pngs aren't top notch themselves but hey, I'm no artist! I would imagine it's a problem with either: a. How the pngs are made example sprite (512x512): https://docs.google.com/open?id=0Bx9Gbwnv9Hd2a2RRQlJiQTFJUEE b. How my Matrices work This is the relevant parts of the renderer: public void onDrawFrame(GL10 unused) { if(world != null) { dt = System.currentTimeMillis() - endTime; world.update( (float) dt); // Redraw background color GLES20.glClear(GLES20.GL_COLOR_BUFFER_BIT); Matrix.setIdentityM(mvMatrix, 0); Matrix.translateM(mvMatrix, 0, 0f, 0f, 0f); world.draw(mvMatrix, mProjMatrix); endTime = System.currentTimeMillis(); } else { Log.d(TAG, "There is no world...."); } } public void onSurfaceChanged(GL10 unused, int width, int height) { GLES20.glViewport(0, 0, width, height); Matrix.orthoM(mProjMatrix, 0, 0, width /2, 0, height /2, -1.f, 1.f); } And this is what each Quad does when draw is called: public void draw(float[] mvMatrix, float[] pMatrix) { Matrix.setIdentityM(mMatrix, 0); Matrix.setIdentityM(mvMatrix, 0); Matrix.translateM(mMatrix, 0, xPos, yPos, 0.f); Matrix.multiplyMM(mvMatrix, 0, mvMatrix, 0, mMatrix, 0); Matrix.scaleM(mvMatrix, 0, scale, scale, 0f); Matrix.rotateM(mvMatrix, 0, angle, 0f, 0f, -1f); GLES20.glUseProgram(mProgram); posAttr = GLES20.glGetAttribLocation(mProgram, "vPosition"); texAttr = GLES20.glGetAttribLocation(mProgram, "aTexCo"); uSampler = GLES20.glGetUniformLocation(mProgram, "uSampler"); int alphaHandle = GLES20.glGetUniformLocation(mProgram, "alpha"); GLES20.glVertexAttribPointer(posAttr, COORDS_PER_VERTEX, GLES20.GL_FLOAT, false, 0, vertexBuffer); GLES20.glVertexAttribPointer(texAttr, 2, GLES20.GL_FLOAT, false, 0, texCoBuffer); GLES20.glEnableVertexAttribArray(posAttr); GLES20.glEnableVertexAttribArray(texAttr); GLES20.glActiveTexture(GLES20.GL_TEXTURE0); GLES20.glBindTexture(GLES20.GL_TEXTURE_2D, texture); GLES20.glUniform1i(uSampler, 0); GLES20.glUniform1f(alphaHandle, alpha); mMVMatrixHandle = GLES20.glGetUniformLocation(mProgram, "uMVMatrix"); mPMatrixHandle = GLES20.glGetUniformLocation(mProgram, "uPMatrix"); GLES20.glUniformMatrix4fv(mMVMatrixHandle, 1, false, mvMatrix, 0); GLES20.glUniformMatrix4fv(mPMatrixHandle, 1, false, pMatrix, 0); GLES20.glDrawElements(GLES20.GL_TRIANGLE_STRIP, 4, GLES20.GL_UNSIGNED_SHORT, indicesBuffer); GLES20.glDisableVertexAttribArray(posAttr); GLES20.glDisableVertexAttribArray(texAttr); GLES20.glBindTexture(GLES20.GL_TEXTURE_2D, 0); } c. How my texture loading/blending/shaders setup works Here is the renderer setup: public void onSurfaceCreated(GL10 unused, EGLConfig config) { // Set the background frame color GLES20.glClearColor(0.0f, 0.0f, 0.0f, 1.0f); GLES20.glDisable(GLES20.GL_DEPTH_TEST); GLES20.glDepthMask(false); GLES20.glBlendFunc(GLES20.GL_ONE, GLES20.GL_ONE_MINUS_SRC_ALPHA); GLES20.glEnable(GLES20.GL_BLEND); GLES20.glEnable(GLES20.GL_DITHER); } Here is the vertex shader: attribute vec4 vPosition; attribute vec2 aTexCo; varying vec2 vTexCo; uniform mat4 uMVMatrix; uniform mat4 uPMatrix; void main() { gl_Position = uPMatrix * uMVMatrix * vPosition; vTexCo = aTexCo; } And here's the fragment shader: precision mediump float; uniform sampler2D uSampler; uniform vec4 vColor; varying vec2 vTexCo; varying float alpha; void main() { vec4 color = texture2D(uSampler, vec2(vTexCo)); gl_FragColor = color; if(gl_FragColor.a == 0.0) { "discard; } } This is how textures are loaded: private int loadTexture(int rescource) { int[] texture = new int[1]; BitmapFactory.Options opts = new BitmapFactory.Options(); opts.inScaled = false; Bitmap temp = BitmapFactory.decodeResource(context.getResources(), rescource, opts); GLES20.glGenTextures(1, texture, 0); GLES20.glActiveTexture(GLES20.GL_TEXTURE0); GLES20.glBindTexture(GLES20.GL_TEXTURE_2D, texture[0]); GLES20.glTexParameterf(GLES20.GL_TEXTURE_2D, GLES20.GL_TEXTURE_MAG_FILTER, GLES20.GL_LINEAR); GLES20.glTexParameterf(GLES20.GL_TEXTURE_2D, GLES20.GL_TEXTURE_MIN_FILTER, GLES20.GL_LINEAR); GLUtils.texImage2D(GLES20.GL_TEXTURE_2D, 0, temp, 0); GLES20.glGenerateMipmap(GLES20.GL_TEXTURE_2D); GLES20.glBindTexture(GLES20.GL_TEXTURE_2D, 0); temp.recycle(); return texture[0]; } I'm sure I'm doing about 20,000 things wrong, so I'm really sorry if the problem is blindingly obvious... The test device is a Galaxy Note, running a JellyBean custom ROM, if that matters at all. So the screen resolution is 1280x800, which means... The background is 1024x1024, so yeah it might be a little blurry, but shouldn't be made of lego. Thank you so much, any answer at all would be appreciated.

Read the article

Enable DreamScene in Any Version of Vista or Windows 7

- by DigitalGeekery

Windows DreamScene was a utility available for Vista Ultimate that allowed users to set video as desktop wallpaper. It was dropped in Windows 7, but we’ll take a look at how to play DreamScenes in all versions of Windows 7 or Vista. Downloading DreamScenes First, you’ll need to find some DreamScenes to download. We’ve found some nice ones at both DreamScene.org and DeviantArt. You can find those download links at the end of the article. They’ll come as compressed files, so you’ll need to extract them after downloading. Windows 7 DreamScene Activator If you are running Windows 7 you can use Windows 7 DreamScene Activator. This free portable utility enables DreamScene in both 32 & 64 bit versions of Windows 7. Users can then set either MPG or WMV files as desktop wallpaper. Download and extract the Windows 7 DreamScene Activator (link below). Once extracted, you’ll need to run the application as administrator. Right-click on the .exe and select Run as administrator. Click on Enable DreamScene. This will also restart Windows Explorer if it is open. To play your DreamScene, browse for the file in Windows Explorer, right-click the file and select Set as Desktop Background. Enjoy your new Windows 7 DreamScene. Although it says it is for Windows 7 only, we were able to get it to work with no problems on Vista Home Premium x32 as well. You can Pause the DreamScene at anytime by right-clicking on the desktop and selecting Pause DreamScene. When you are ready for a change, click Disable DreamScene and switch back to your previous wallpaper. Using VLC Media Player Users of all versions of Windows 7 & Vista can enable a DreamScene using VLC. Recently, we showed you how to set a video as your desktop wallpaper in VLC. Since DreamScenes are in MPEG or WMV format, we will use the same tactic to display them as desktop wallpaper. We’ll just need to make a few additional tweaks to the VLC settings. You’ll need to download and install VLC media player if you don’t already have it. You can find the download link below. Next, select Tools > Preferences from the Menu. Select the Video button on the left and then choose DirectX video output from the Output dropdown list. Next, select All under Show Settings at the lower left, then select the Video button on the left pane. Uncheck Show media title on video. This will prevent VLC from constantly showing the title of the video on the screen each time the video loops. Click Save and the restart VLC. Now we will add the video to our playlist and set it to continuously loop. Select View > Playlist from the Menu. Select the Add file button from the bottom of the Playlist window and select Add file. Browse for your file and click Open. Click the Loop button at the bottom so the video plays in a continuous loop. Now, we’re ready to play the video. After the video starts playing, select Video > DirectX Wallpaper from the Menu, then minimize VLC. If you’re using Aero Themes, you may get a pop-up warning and Windows will switch automatically to a basic theme. If looping one video gets to be a little repetitive, you can add multiple videos to your playlist in VLC and loop the entire playlist. Just make sure you toggle the Loop button on the playlist window to Loop All. Now you’ve got a nice DreamScene playing on your desktop. Another cool trick you can do with VLC is take snapshots of favorite movie scenes and set them as backgrounds. When you’re ready to go back to your old wallpaper, maximize VLC, select Video and click DirectX Wallpaper again to turn it off the video background. Occasionally we were left with a black screen and had to manually change our wallpaper back to normal even after turning off the DirectX Wallpaper. Note: Keep in mind that using the VLC method takes up a lot of resources so if you try to run it on older hardware, or say a netbook, you’re not going to get good results. We also tried to use the VLC method in XP, but couldn’t get it to work. If you have leave a comment and let us know. While the DreamScene feature never really caught on in Vista, we find them to be a cool way to pump a little life into your desktop on any version of Vista or Windows 7. Downloads DreamScenes from Dreamscene.org DreamScenes from DeviantArt Download VLC media player Windows 7 DreamScene Activator Similar Articles Productive Geek Tips Wait, How do I Turn on DreamScene Again?Enable Run Command on Windows 7 or Vista Start MenuEnable or Disable UAC From the Windows 7 / Vista Command LineUnderstanding Windows Vista Aero Glass RequirementsEnable Mapping to \HostnameC$ Share on Windows 7 or Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries Rent Cameras In Bulk At CameraRenter Download Songs From MySpace

Read the article

Oracle Fusion Middleware 11g next launch phase - what a week of product releases! Feedback from our

- by Jürgen Kress

Product releases: SOA Suite 11gR1 Patch Set 2 (PS2) BPM Suite 11gR1 Released Oracle JDeveloper 11g (11.1.1.3.0) (Build 5660) Oracle WebLogic Server 11gR1 (10.3.3) Oracle JRockit (4.0) Oracle Tuxedo 11gR1 (11.1.1.1.0) Enterprise Manager 11g Grid Control Release 1 (11.1.0.1.0) for Linux x86/x86-64 All Oracle Fusion Middleware 11gR1 Software Download BPM Suite 11gR1 Released by Manoj Das Oracle BPM Suite 11gR1 became available for download from OTN and eDelivery. If you have been following our plans in this area, you know that this is the release unifying BEA ALBPM product, which became Oracle BPM10gR3, with the Oracle stack. Some of the highlights of this release are: BPMN 2.0 modeling and simulation Web based Process Composer for BPMN and Rules authoring Zero-code environment with full access to Oracle SOA Suite’s rich set of application and other adapters Process Spaces – Out-of-box integration with Web Center Suite Process Analytics – Native process cubes as well as integration with Oracle BAM You can learn more about this release from the documentation. Notes about downloading and installing Please note that Oracle BPM Suite 11gR1 is delivered and installed as part of SOA 11.1.1.3.0, which is a sparse release (only incremental patch). To install: Download and install SOA 11.1.1.2.0, which is a full release (you can find the bits at the above location) Download and install SOA 11.1.1.3.0 During configure step (using the Fusion Middleware configuration wizard), use the Oracle Business Process Management template supplied with the SOA Suite11g (11.1.1.3.0) If you plan to use Process Spaces, also install Web Center 11.1.1.3.0, which also is delivered as a sparse release and needs to be installed on top of Web Center 11.1.1.2.0 SOA Suite 11gR1 Patch Set 2 (PS2) released by Demed L'Her We just released SOA Suite 11gR1 Patch Set 2 (PS2)! You can download it as usual from: OTN (main platforms only) eDelivery (all platforms) 11gR1 PS2 is delivered as a sparse installer, that is to say that it is meant to be applied on the latest full install (11gR1 PS1). That’s great for existing PS1 users who simply need to apply the patch and run the patch assistant – but an extra step for new users who will first need to download SOA Suite 11gR1 PS1 (in addition to the PS2 patch). What’s in that release? Bug fixes of course but also several significant new features. Here is a short selection of the most significant ones: Spring component (for native Java extensibility and integration) SOA Partitions (to organize and manage your composites) Direct Binding (for transactional invocations to and from Oracle Service Bus) HTTP binding (for those of you trying to do away with SOAP and looking for simple GET and POST) Resequencer (for ordering out-of-order messages) WS Atomic Transactions (WS-AT) support (for propagation of transactions across heterogeneous environments) Check out the complete list of new features in PS2 for more (including links to the documentation for the above)! But maybe even more importantly we are also releasing Oracle Service Bus 11gR1 and BPM Suite 11gR1 at the same time – all on the same base platform (WebLogic Server 10.3.3)! (NB: it might take a while for all pages and caches to be updated with the new content so if you don’t find what you need today, try again soon!) Are you Systems Integrations and Independent Software Vendors ready to adopt and to deliver? Make sure that you become trained: Local training calendars Register for the SOA Partner Community & Webcast www.oracle.com/goto/emea/soa What is your feedback? Who installed the software? please feel free to share your experience at http://twitter.com/soacommunity #soacommunity Technorati Tags: SOA partner community ACE Directoris SOA Suite PS2 BPM11g First feedback from our ACE Directors and key Partners: Now, these are great times to start the journey into BPM! Hajo Normann Reuse of components across the Oracle 11G Fusion Middleware stack, BPM just is one of the components plugging into the stack and reuses all other components. Mr. Leon Smiers With BPM11g, Oracle offers a very competitive product which will have a big effect on the IT market. Guido Schmutz We have real BPMN 2.0, which get's executed. No more transformation from business models to executable models - just press the run button... Torsten Winterberg Oracle BPM Suite 11g brings Out-of-box integration with WebCenter Suite and Oracle ADF development framework. Andrejus Baranovskis With the release of BPM Suite 11g, Oracle has defined new standards for Business Process platforms. Geoffroy de Lamalle With User Messaging Service you can let Soa Suite 11g do all your Messaging Edwin Biemond

Read the article

Official and unofficial apps in the iOS, WP7, and Android marketplaces

- by Bil Simser

The last few months have seen people complaining about the lack of "official" apps in the Windows Phone marketplace. In fact a couple of months ago I wrote about this very thing here and if we really needed these official apps or could get by with third-party solutions. Recently a list of "Top 100 Mobile Apps" crossed my desk and it was curious. 40 iPhone apps, 40 Android apps, 10 WP7 apps, and 10 BlackBerry apps. Really? 10 for WP7? So I wondered if the media was just playing this up and maybe continuing to do what I think most vendors are doing which is treating Windows Phone as the red-headed step-child you keep in the basement while all along there's nothing wrong with them. I put together the list and went digging to see how many of the top 40 iOS and Android apps were also on the Windows Phone platform (sorry BlackBerry, you should just shut your doors right now). Here's the results. Note, these are all *free* apps. There might be other pay apps that have official representation across all mobile devices, I just chose to hunt these ones down because I'm cheap. In the top 40, I easily plucked out 20 that had official apps on all three platforms. These were: Amazon Mobile, ESPN Score Centre, Evernote, Facebook, Foursquare, Google Search, IMDB, Kindle, Shazam, Skype (yes, I know, in beta on WP7), SlackerRadio, The Weather Channel, TripIt, Twitter, Yelp, Flixster, Netflix, TuneIn Radio, Dictionary.com, Angry Birds, and Groupon. Hey, that's pretty good IMHO. 20 or so apps, all free, and all fully functional and supported (and in some cases, even better looking on the Windows Phone platform than the other platforms). A dozen or so more apps had official apps on some platforms but not all, so yes, there are gaps here. Here's a rundown of the hangers-on: Adobe Photoshop Express This looks great on the iOS platform and there's even an official version on droid. Hope Adobe brings this to WP7. There are other photo editing programs though if you go looking (maybe we can get Paint.NET to be ported to the phone?) BBC News A few apps offer news feeds but nothing official on the Windows Phone. The feeds are good but without video this app needs some WP7 love. Dropbox Again Windows Phone looses out here with no official app. There are a few third party ones that will help you along and offer most of the functionality that you need but no integration that an official app might bring. Epicurious Droid seems to be the trailer here as there are apps for it but nothing official (from what I can tell). Both iOS and WP7 have them. Flipboard It's sad with Flipboard as it's such a great newsreader. The only offiical app is for iOS but frankly the iPhone version looks horrible so without a tablet the experience here isn't that hot. Maybe with WP8. Currently there's nothing even remotely similar to this on the other platforms. Google+ Is anyone still using this? No official app for WP7 but some clones. Apparently there's no API so people are just screen scraping. Ugh. Mint.com This app has all kinds of buzz and a lot of votes on the application requests site. Official apps for iOS and droid. No WP7 love (yet). TED Quite a few TED apps on WP7 but nothing official. I think the third party ones suffice and some are pretty nice looking, taking advantage of the Metro interface and making for a good show. WebMD There's a third party app on WP7 here but nothing official. It seems to contain all the same information and functionality the official apps do so not sure if an official one is needed but its here for inclusion. The other apps in the top 40 were either very specific to the platform (for example all three of them have a "Find my Phone" app). There are others that are missing out on the WP7 platform like ooVoo, Words With Friends, and some of the Google apps (Google Voice for example). Since you can integrate your GMail account right into the Windows Phone (via linked inboxes) I'm not sure if there's a need for an official GMail app here. Looking at the numbers Windows Phone still gets the worst of the deal here with half a dozen highly popular "offical" apps that exist on the other mobile platforms and in some cases, nothing even remotely similar to the official app to compare. This doesn't include things like Instagram, PInterest, and others (don't get me started on those). Still, with over 20+ highly popular free apps all represented on all three mobile platforms I don't think it's a bad place to be in. The Windows Phone platform could get a little more love from the vendors missing here, or at least open up your APIs so the third party crowd can step in and take up the slack. P.S. these are just my observations and I might have got a few items wrong. Feel free to chime in with missing or incorrect information. I am after all human. Well, most of me is.

Read the article

The Oracle Graduate Experience...A Graduates Perspective by Angelie Tierney

- by david.talamelli

[Note: Angelie has just recently joined Oracle in Australia in our 2011 Graduate Program. Last week I shared my thoughts on our 2011 Graduate Program, this week Angelie took some time to share her thoughts of our Graduate Program. The notes below are Angelie's overview from her experience with us starting with our first contact last year - David Talamelli] How does the 1 year program work? It consists of 3 weeks of training, followed by 2 rotations in 2 different Lines of Business (LoB's). The first rotation goes for 4 months, while your 2nd rotation goes for 7, when you are placed into your final LoB for the program. The interview process: After sorting through the many advertised graduate jobs, submitting so many resumes and studying at the same time, it can all be pretty stressful. Then there is the interview process. David called me on a Sunday afternoon and I spoke to him for about 30 minutes in a mini sort of phone interview. I was worried that working at Oracle would require extensive technical experience, but David stressed that even the less technical, and more business-minded person could, and did, work at Oracle. I was then asked if I would like to attend a group interview in the next weeks, to which I said of course! The first interview was a day long, consisting of a brief introduction, a group interview where we worked on a business plan with a group of other potential graduates and were marked by 3 Oracle employees, on our ability to work together and presentation. After lunch, we then had a short individual interview each, and that was the end of the first round. I received a call a few weeks later, and was asked to come into a second interview, at which I also jumped at the opportunity. This was an interview based purely on your individual abilities and would help to determine which Line of Business you would go to, should you land a graduate position. So how did I cope throughout the interview stages? I believe the best tool to prepare for the interview, was to research Oracle and its culture and to see if I thought I could fit into that. I personally found out about Oracle, its partners as well as competitors and along the way, even found out about their part (or Larry Ellison's specifically) in the Iron Man 2 movie. Armed with some Oracle information and lots of enthusiasm, I approached the Oracle Graduate Interview process. Why did I apply for an Oracle graduate position? I studied a Bachelor of Business/Bachelor of Science in IT, and wanted to be able to use both my degrees, while have the ability to work internationally in the future. Coming straight from university, I wasn't sure exactly what I wanted to do in terms of my career. With the program, you are rotated across various lines of business, to not only expose you to different parts of the business, but to also help you to figure out what you want to achieve out of your career. As a result, I thought Oracle was the perfect fit. So what can an Oracle ANZ Graduate expect? First things first, you can expect to line up for your visitor pass. Really. Next you enter a room full of unknown faces, graduates just like you, and then you realise you're in this with 18 other people, going through the same thing as you. 3 weeks later you leave with many memories, colleagues you can call your friends, and a video of your presentation. Vanessa, the Graduate Manager, will also take lots of photos and keep you (well) fed. Well that's not all you leave with, you are also equipped with a wealth of knowledge and contacts within Oracle, both that will help you throughout your career there. What training is involved? We started our Oracle experience with 3 weeks of training, consisting of employee orientation, extensive product training, presentations on the various lines of business (LoB's), followed by sales and presentation training. While there was potential for an information overload, maybe even death by Powerpoint, we were able to have access to the presentations for future reference, which was very helpful. This period also allowed us to start networking, not only with the graduates, but with the managers who presented to us, as well as through the monthly chinwag, HR celebrations and even with the sharing of tea facilities. We also had a team bonding day when we recorded a "commercial" within groups, and learned how to play an Irish drum. Overall, the training period helped us to learn about Oracle, as well as ourselves, and to prepare us for our transition into our rotations. Where to now? I'm now into my 2nd week of my first graduate rotation. It has been exciting to finally get out into the work environment and utilise that knowledge we gained from training. My manager has been a great mentor, extremely knowledgeable, and it has been good being able to participate in meetings, conference calls and make a contribution towards the business. And while we aren't necessarily working directly with the other graduates, they are still reachable via email, Pidgin and lunch and they are important as a resource and support, after all, they are going through a similar experience to you. While it is only the beginning, there is a lot more to learn and a lot more to experience along the way, especially because, as we learned during training, at Oracle, the only constant is change.

Read the article

OpenSSL Versions in Solaris

- by darrenm

Those of you have have installed Solaris 11 or have read some of the blogs by my colleagues will have noticed Solaris 11 includes OpenSSL 1.0.0, this is a different version to what we have in Solaris 10. I hope the following explains why that is and how it fits with the expectations on binary compatibility between Solaris releases. Solaris 10 was the first release where we included OpenSSL libraries and headers (part of it was actually statically linked into the SSH client/server in Solaris 9). At time we were building and releasing Solaris 10 the current train of OpenSSL was 0.9.7. The OpenSSL libraries at that time were known to not always be completely API and ABI (binary) compatible between releases (some times even in the lettered patch releases) though mostly if you stuck with the documented high level APIs you would be fine. For this reason OpenSSL was classified as a 'Volatile' interface and in Solaris 10 Volatile interfaces were not part of the default library search path which is why the OpenSSL libraries live in /usr/sfw/lib on Solaris 10. Okay, but what does Volatile mean ? Quoting from the attributes(5) man page description of Volatile (which was called External in older taxonomy): Volatile interfaces can change at any time and for any reason. The Volatile interface stability level allows Sun pro- ducts to quickly track a fluid, rapidly evolving specif- ication. In many cases, this is preferred to providing additional stability to the interface, as it may better meet the expectations of the consumer. The most common application of this taxonomy level is to interfaces that are controlled by a body other than Sun, but unlike specifications controlled by standards bodies or Free or Open Source Software (FOSS) communities which value interface compatibility, it can not be asserted that an incompatible change to the interface specifica- tion would be exceedingly rare. It may also be applied to FOSS controlled software where it is deemed more important to track the community with minimal latency than to provide stability to our customers. It also common to apply the Volatile classification level to interfaces in the process of being defined by trusted or widely accepted organization. These are generically referred to as draft standards. An "IETF Internet draft" is a well understood example of a specification under development. Volatile can also be applied to experimental interfaces. No assertion is made regarding either source or binary compatibility of Volatile interfaces between any two releases, including patches. Applications containing these interfaces might fail to function properly in any future release. Note that last paragraph! OpenSSL is only one example of the many interfaces in Solaris that are classified as Volatile. At the other end of the scale we have Committed (Stable in Solaris 10 terminology) interfaces, these include things like the POSIX APIs or Solaris specific APIs that we have no intention of changing in an incompatible way. There are also Private interfaces and things we declare as Not-an-Interface (eg command output not intended for scripting against only to be read by humans). Even if we had declared OpenSSL as a Committed/Stable interface in Solaris 10 there are allowed exceptions, again quoting from attributes(5): 4. An interface specification which isn't controlled by Sun has been changed incompatibly and the vast majority of interface consumers expect the newer interface. 5. Not making the incompatible change would be incomprehensible to our customers. In our opinion and that of our large and small customers keeping up with the OpenSSL community is important, and certainly both of the above cases apply. Our policy for dealing with OpenSSL on Solaris 10 was to stay at 0.9.7 and add fixes for security vulnerabilities (the version string includes the CVE numbers of fixed vulnerabilities relevant to that release train). The last release of OpenSSL 0.9.7 delivered by the upstream community was more than 4 years ago in Feb 2007. Now lets roll forward to just before the release of Solaris 11 Express in 2010. By that point in time the current OpenSSL release was 0.9.8 with the 1.0.0 release known to be coming soon. Two significant changes to OpenSSL were made between Solaris 10 and Solaris 11 Express. First in Solaris 11 Express (and Solaris 11) we removed the requirement that Volatile libraries be placed in /usr/sfw/lib, that means OpenSSL is now in /usr/lib, secondly we upgraded it to the then current version stream of OpenSSL (0.9.8) as was expected by our customers. In between Solaris 11 Express in 2010 and the release of Solaris 11 in 2011 the OpenSSL community released version 1.0.0. This was a huge milestone for a long standing and highly respected open source project. It would have been highly negligent of Solaris not to include OpenSSL 1.0.0e in the Solaris 11 release. It is the latest best supported and best performing version. In fact Solaris 11 isn't 'just' OpenSSL 1.0.0 but we have added our SPARC T4 engine and the AES-NI engine to support the on chip crypto acceleration. This gives us 4.3x better AES performance than OpenSSL 0.9.8 running on AIX on an IBM POWER7. We are now working with the OpenSSL community to determine how best to integrate the SPARC T4 changes into the mainline OpenSSL. The OpenSSL 'pkcs11' engine we delivered in Solaris 10 to support the CA-6000 card and the SPARC T1/T2/T3 hardware is still included in Solaris 11. When OpenSSL 1.0.1 and 1.1.0 come out we will asses what is best for Solaris customers. It might be upgrade or it might be parallel delivery of more than one version stream. At this time Solaris 11 still classifies OpenSSL as a Volatile interface, it is our hope that we will be able at some point in a future release to give it a higher interface stability level. Happy crypting! and thank-you OpenSSL community for all the work you have done that helps Solaris.

Read the article

Visual Studio & TFS 11 – List of extensions and upgrades

- by terje

This post is a list of the extensions I recommend for use with Visual Studio 11. It’s coming up all the time – what to install, where are the download sites, last version, etc etc, and thus I thought it better to post it here and keep it updated. The basics are Visual Studio 11 connected to a Team Foundation Server 11. Note that we now are at Beta time, and that also many live in a side-by-side environment with Visual Studio 2010. The side-by-side is supported by VS 11. However, if you installed a component supporting VS11 before you installed VS11, then you need to reinstall it. The VSIX installer will understand that it is to apply those only for VS11, and will not touch – nor remove – the same for VS2010. A good example here is the Power Commands. The list is more or less in priority order. The focus is to get a setup which can be used for a complete coding experience for the whole ALM process. The list of course reflects what I use for my work , so it is by no means complete, and for some of the tools there are equally useful alternatives. Many components have not yet arrived with VS11 support. I will add them as they arrive. The components directly associated with Visual Studio from Microsoft should be common, see the Microsoft column. If you still need the VS2010 extensions, here they are: The extensions for VS 2010. Components ready for VS 11, both upgrades and new ones Product Notes Latest Version License Applicable to Microsoft TFS Power Tools Beta 111 Side-by-side with TFS 2010 should work, but remove the Shell Extension from the TFS 2010 power tool first. March 2012(11.0.50321.0) Free TFS integration Yes ReSharper EAP for Beta 11 (updates very often, nearly daily) 7.0.3.261 pr. 16/3/2012 Free as EAP, Licensed later Coding & Quality No Power Commands1 Just reinstall, even if you already have it for VS2010. The reinstall will then apply it to VS 11 1.0.2.3 Free Coding Yes Visualization and Modelling SDK for beta Info here and here. Another download site and info here. Also download from MSDN Subscription site. Requires VS 11 Beta SDK 11 Free now, otherwise Part of MSDN Subscription Modeling Yes Visual Studio 11 Beta SDK Published 16.2.2012 Yes Visual Studio 11 Feedback tool1 Use this to really ease the process of sending bugs back to Microsoft. 1.1 Free as prerelase Visual Studio Yes #1 Get via Visual Studio’s Tools | Extension Manager (or The Code Gallery). (From Adam : All these are auto updated by the Extension Manager in Visual Studio) #2 Works with ultimate only Components we wait for, not yet in a VS 11 version Product Notes Latest Version License Applicable to Microsoft Coding Yes Inmeta Build Explorer Free TFS integration No Build Manager Community Build Manager. Info here from Jakob Free TFS Integration No Code Contracts Coming real soon Free Coding & Quality Yes Code Contracts Editor Extensions Free Coding & Quality Yes Web Std Update Free Coding (Web) Yes (MSFT) Web Essentials Free Coding (Web) Yes (MSFT) DotPeek It says up to .Net 4.0, but some tests indicates it seems to be able to handle 4.5. 1.0.0.7999 Free Coding/Investigation No Just Decompile Also says up to .net 4.0 Free Coding/Investigation No dotTrace Licensed Quality No NDepend Licensed Quality No tangible T4 editor Lite version Free (Good enough) Coding (T4 templates) No Pex Moles are now integrated and improved in VS 11 as a new library called Fakes. Coding & Unit Testing Yes Components which are now integrated into VS 11 Product Notes Productivity Power Tools Features integrated into VS11, with a few exceptions, I don’t think you will miss those. Fakes Was Moles in 2010. Fakes is improved and made into a product. NuGet Manager Included in the install, but still an extension package. Info here. Product installation, upgrades and patches for VS/TFS 11 Product Notes Date Applicable to Visual Studio 11 & TFS 11 Beta This is the beta release, and you are free to download and try it out. March 2012 Visual Studio and TFS SQL Server 2008 R2 SP1 Cumulative Update 4 The TFS 11 requires the CU1 at least, but you should go up to at least CU4, since this update solves a ghost record problem that otherwise may cause your TFS database to not release records the way it should when you clean it up, see this post for more information on that issue. Oct 2011 SQL Server 2008 R2 SP1

Read the article

A Gentle Introduction to NuGet

- by Joe Mayo

Not too long ago, Microsoft released, NuGet, an automated package manager for Visual Studio. NuGet makes it easy to download and install assemblies, and their references, into a Visual Studio project. These assemblies, which I loosely refer to as packages, are often open source, and include projects such as LINQ to Twitter. In this post, I'll explain how to get started in using NuGet with your projects to include: installng NuGet, installing/uninstalling LINQ to Twitter via console command, and installing/uninstalling LINQ to Twitter via graphical reference menu. Installing NuGet The first step you'll need to take is to install NuGet. Visit the NuGet site, at http://nuget.org/, click on the Install NuGet button, and download the NuGet.Tools.vsix installation file, shown below. Each browser is different (i.e. FireFox, Chrome, IE, etc), so you might see options to run right away, save to a location, or access to the file through the browser's download manager. Regardless of how you receive the NuGet installer, execute the downloaded NuGet.Tools.vsix to install Nuget into visual Studio. The NuGet Footprint When you open visual Studio, observe that there is a new menu option on the Tools menu, titled Library Package Manager; This is where you use NuGet. There are two menu options, from the Library Package Manager Menu that you can use: Package Manager Console and Package Manager Settings. I won't discuss Package Manager Settings in this post, except to give you a general idea that, as one of a set of capabilities, it manages the path to the NuGet server, which is already set for you. Another menu, added by the NuGet installer, is Add Library Package Reference, found by opening the context menu for either a Solution Explorer project or a project's References folder or via the Project menu. I'll discuss how to use this later in the post. The following discussion is concerned with the other menu option, Package Manager Console, which allows you to manage NuGet packages. Gettng a NuGet Package Selecting Tools -> Library Package Manager -> Package Manager Console opens the Package Manager Console. As you can see, below, the Package Manager Console is text-based and you'll need to type in commands to work with packages. In this post, I'll explain how to use the Package Manager Console to install LINQ to Twitter, but there are many more commands, explained in the NuGet Package Manager Console Commands documentation. To install LINQ to Twitter, open your current project where you want LINQ to Twitter installed, and type the following at the PM> prompt: Install-Package linqtotwitter If all works well, you'll receive a confirmation message, similar to the following, after a brief pause: Successfully installed 'linqtotwitter 2.0.20'. Successfully added 'linqtotwitter 2.0.20' to NuGetInstall. Also, observe that a reference to the LinqToTwitter.dll assembly was added to your current project. Uninstalling a NuGet Package I won't be so bold as to assume that you would only want to use LINQ to Twitter because there are other Twitter libraries available; I recommend Twitterizer if you don't care for LINQ to Twitter. So, you might want to use the following command at the PM> prompt to remove LINQ to Twitter from your project: Uninstall-Package linqtotwitter After a brief pause, you'll see a confirmation message similar to the following: Successfully removed 'linqtotwitter 2.0.20' from NuGetInstall. Also, observe that the LinqToTwitter.dll assembly no longer appears in your project references list. Sometimes using the Package Manager Console is required for more sophisticated scenarios. However, LINQ to Twitter doesn't have any dependencies and is a very simple install, so you can use another method of installing graphically, which I'll show you next. Graphical Installations As explained earlier, clicking Add Library Package Reference, from the context menu for either a Solution Explorer project or a project's References folder or via the Project menu opens the Add Library Package Reference window. This window will allow you to add a reference a NuGet package in your project. To the left of the window are a few accordian folders to help you find packages that are either on-line or already installed. Just like the previous section, I'll assume you are installing LINQ to Twitter for the first time, so you would select the Online folder and click All. After waiting for package descriptions to download, you'll notice that there are too many to scroll through in a short period of time, over 900 as I write this. Therefore, use the search box located at the top right corner of the window and type LINQ to Twitter as I've done in the previous figure. You'll see LINQ to Twitter appear in the list. Click the Install button on the LINQ to Twitter entry. If the installation was successful, you'll see a message box display and disappear quickly (or maybe not if your machine is very fast or you blink at that moment). Then you'll see a reference to the LinqToTwitter.dll assembly in your project's references list. Note: While running this demo, I ran into an issue where VS had created a file lock on an installation folder without releasing it, causing an error with "packagename already exists. Skipping..." and then an error describing that it couldn't write to a destination folder. I resolved the problem by closing and reopening VS. If you open the Add a Library Package Reference window again, you'll see LINQ to Twitter listed in the Recent packages folder. Summary You can install NuGet via the on-line home page with a click of a button. Nuget provides two ways to work with packages, via console or graphical window. While the graphical window is easiest, the console window is more powerful. You can now quickly add project references to many available packages via the NuGet service. Joe

Read the article

A tale of two dev accounts

- by TechTwaddle

Note: I am currently in the process of relocating my blog from http://www.geekswithblogs.net/techtwaddle to my new address at http://www.techtwaddle.net I suggest you point your feed readers to the new address as I slowly transition to my new shared-hosted, ad-free wordpress blog :) You probably remember my rant from a while back about my windows mobile developer account having problems with the new AppHub, well, there have been few developments and I thought I should share it with you. First up, the issue isn’t fixed yet. I still cannot login to AppHub using my windows mobile 6.x developer account and can’t view details of my Minesweeper app. Who knows how many copies its sold. I had numerous exchanges with Microsoft’s support team on the AppHub forums and via email as well (support ticket), but somehow we never managed to get to the root of it. In fact, the support team itself grew so tired of the problem that they suggested I create a new dev account. I grew impatient, and it was really frustrating to have an app ready for submission but not being able to do anything with it. Eventually, the frustration had to show somewhere, and it was on this forum thread Prabhu Kumar in reply to Nick Nick, I feel for you and totally understand the frustration. Since day one I have been getting the XBOX profile linking error, We encountered an issue connecting your App Hub account with your Xbox Live Profile. Please visit Xbox.com and update your contact information. After you have updated your contact information, please return to the App Hub (https://users.create.msdn.com/Register) to continue. I have an app published on the Windows Mobile 6.x marketplace since Aug, now I can't view the details of this app. I completed work on my WP7 application 1.5 months ago and the first version is ready for submission to marketplace, only if I can login. You can imagine how frustrating all this can be, the issue has taken far too long to be fixed, this has drained all my motivation. I have exchanged numerous mails with Microsoft support team on this issue, and from the looks of it they really are trying their best, unfortunately, their best is not good enough for some of us. During the first week of December I was told that there would be an update happening to AppHub around mid of December. I was hoping that the issue would be fixed but it wasn't. After the update the only change I notice is that the xbox.com link on the error page now takes me to the correct link. Previously, this link used to take me to the 404 page you mentioned above. Out of desperation, I am now considering creating another developer account on AppHub with a new live id, even this I am not 100% sure will work. I asked the support team when the next update to AppHub was planned and got this reply, "We do not have release date to announce for the next App Hub update at this time. In regards to the login issue you are experiencing at this point the only solution would be to create a new account with a different live ID but make sure to go to xbox.com before hand to get all the information in order on that side." I know it's an extra $99, and not that I can't afford it but it doesn't feel right and I shouldn't have to be doing it in the first place. I have lost all hope of this issue being resolved. I went ahead and created a new dev account, the id verification was in progress when Shaun Taulbee of Microsoft, who has been really helpful in the forums, replied saying, If you find it necessary to pay again to create a new account due to a Microsoft problem, send in a support request asking for a refund and we'll review it (and likely approve it given the circumstances). The thought of refund made me happy, but I had my doubts. So once my second account was verified by Geotrust I applied for a refund through the developer dashboard, by creating a support ticket. Couple of days later I got an email from Microsoft saying that the refund had been approved! yay! Few days and the refund showed up on my bill, Well, thank you Microsoft, it means a lot. I am glad it’s over now. The new account works flawlessly. I would still like to get my first account working again and look at my app numbers for Win Mo 6.x, and probably transfer the credits to the new account somehow, but I’ll save it for another day. If you’ve had similar problems with the AppHub, and had to create a new account to submit your app, I suggest you contact the support team and get your dollars refunded!

Read the article

C#/.NET Little Wonders – Cross Calling Constructors

- by James Michael Hare

Just a small post today, it’s the final iteration before our release and things are crazy here! This is another little tidbit that I love using, and it should be fairly common knowledge, yet I’ve noticed many times that less experienced developers tend to have redundant constructor code when they overload their constructors. The Problem – repetitive code is less maintainable Let’s say you were designing a messaging system, and so you want to create a class to represent the properties for a Receiver, so perhaps you design a ReceiverProperties class to represent this collection of properties. Perhaps, you decide to make ReceiverProperties immutable, and so you have several constructors that you can use for alternative construction: 1: // Constructs a set of receiver properties. 2: public ReceiverProperties(ReceiverType receiverType, string source, bool isDurable, bool isBuffered) 3: { 4: ReceiverType = receiverType; 5: Source = source; 6: IsDurable = isDurable; 7: IsBuffered = isBuffered; 8: } 9: 10: // Constructs a set of receiver properties with buffering on by default. 11: public ReceiverProperties(ReceiverType receiverType, string source, bool isDurable) 12: { 13: ReceiverType = receiverType; 14: Source = source; 15: IsDurable = isDurable; 16: IsBuffered = true; 17: } 18: 19: // Constructs a set of receiver properties with buffering on and durability off. 20: public ReceiverProperties(ReceiverType receiverType, string source) 21: { 22: ReceiverType = receiverType; 23: Source = source; 24: IsDurable = false; 25: IsBuffered = true; 26: } Note: keep in mind this is just a simple example for illustration, and in same cases default parameters can also help clean this up, but they have issues of their own. While strictly speaking, there is nothing wrong with this code, logically, it suffers from maintainability flaws. Consider what happens if you add a new property to the class? You have to remember to guarantee that it is set appropriately in every constructor call. This can cause subtle bugs and becomes even uglier when the constructors do more complex logic, error handling, or there are numerous potential overloads (especially if you can’t easily see them all on one screen’s height). The Solution – cross-calling constructors I’d wager nearly everyone knows how to call your base class’s constructor, but you can also cross-call to one of the constructors in the same class by using the this keyword in the same way you use base to call a base constructor. 1: // Constructs a set of receiver properties. 2: public ReceiverProperties(ReceiverType receiverType, string source, bool isDurable, bool isBuffered) 3: { 4: ReceiverType = receiverType; 5: Source = source; 6: IsDurable = isDurable; 7: IsBuffered = isBuffered; 8: } 9: 10: // Constructs a set of receiver properties with buffering on by default. 11: public ReceiverProperties(ReceiverType receiverType, string source, bool isDurable) 12: : this(receiverType, source, isDurable, true) 13: { 14: } 15: 16: // Constructs a set of receiver properties with buffering on and durability off. 17: public ReceiverProperties(ReceiverType receiverType, string source) 18: : this(receiverType, source, false, true) 19: { 20: } Notice, there is much less code. In addition, the code you have has no repetitive logic. You can define the main constructor that takes all arguments, and the remaining constructors with defaults simply cross-call the main constructor, passing in the defaults. Yes, in some cases default parameters can ease some of this for you, but default parameters only work for compile-time constants (null, string and number literals). For example, if you were creating a TradingDataAdapter that relied on an implementation of ITradingDao which is the data access object to retreive records from the database, you might want two constructors: one that takes an ITradingDao reference, and a default constructor which constructs a specific ITradingDao for ease of use: 1: public TradingDataAdapter(ITradingDao dao) 2: { 3: _tradingDao = dao; 4: 5: // other constructor logic 6: } 7: 8: public TradingDataAdapter() 9: { 10: _tradingDao = new SqlTradingDao(); 11: 12: // same constructor logic as above 13: } As you can see, this isn’t something we can solve with a default parameter, but we could with cross-calling constructors: 1: public TradingDataAdapter(ITradingDao dao) 2: { 3: _tradingDao = dao; 4: 5: // other constructor logic 6: } 7: 8: public TradingDataAdapter() 9: : this(new SqlTradingDao()) 10: { 11: } So in cases like this where you have constructors with non compiler-time constant defaults, default parameters can’t help you and cross-calling constructors is one of your best options. Summary When you have just one constructor doing the job of initializing the class, you can consolidate all your logic and error-handling in one place, thus ensuring that your behavior will be consistent across the constructor calls. This makes the code more maintainable and even easier to read. There will be some cases where cross-calling constructors may be sub-optimal or not possible (if, for example, the overloaded constructors take completely different types and are not just “defaulting” behaviors). You can also use default parameters, of course, but default parameter behavior in a class hierarchy can be problematic (default values are not inherited and in fact can differ) so sometimes multiple constructors are actually preferable. Regardless of why you may need to have multiple constructors, consider cross-calling where you can to reduce redundant logic and clean up the code. Technorati Tags: C#,.NET,Little Wonders

Search Results

Search found 14131 results on 566 pages for 'of note'.

Page 485/566 | < Previous Page | 481 482 483 484 485 486 487 488 489 490 491 492 | Next Page >

- by Daniel Mortimer

- by john.orourke(at)oracle.com

- by Steve Michelotti

- by Rajesh Sharma

- by Bob Rhubart

- by Laurent Bugnion

- by russ.bishop

- by Elton Stoneman

- by Kyle Hatlestad

- by pinaldave

- by Kellsey Ruppel

- by jehan

- by Joshua Thomas

- by Clint Edmonson

- by Chris Hoffman

- by Milo Mordaunt

- by DigitalGeekery

- by Jürgen Kress

- by Bil Simser

- by david.talamelli

- by darrenm

- by terje

- by Joe Mayo

- by TechTwaddle

- by James Michael Hare

< Previous Page | 481 482 483 484 485 486 487 488 489 490 491 492 | Next Page >