Search Results

Search found 16914 results on 677 pages for 'single threaded'.

Page 485/677 | < Previous Page | 481 482 483 484 485 486 487 488 489 490 491 492  | Next Page >

• Getting SMB file shares working over a PPTP VPN

  - by Ben Scott

  I'm having issues getting SMB file shares working over a PPTP VPN. The server setup consists of a security device (DrayTek V3300) which passes the PPTP authentication to a SBS2003 server running RRAS. The server is the DC and provides DNS and WINS, the single NIC's name server is set to the NIC's IP (192.168...), and DHCP on the DrayTek sets the server IP as the DNS. If I create a new VPN connection in Win7, leaving everything as default apart from the server, username, password and domain, I can: ping everything by IP address resolve IPs with nslookup using their fully-qualified name, as in nslookup fileserver.mydomain.local ping machines by fully-qualified name, as in ping fileserver.mydomain.local However if I try to access a file share: within Explorer, I get "Windows cannot access ..." with "Error code: 0x80004005 Unspecified Error", using net use z: \\fileserver.mydomain.local\share, I get "System error 53 has occurred. The network path was not found." If I add the machine name to my HOSTS file I can use the file share, which is my last-ditch workaround, but I have a number of VPN users and would rather a solution that doesn't involve me trying to hand-edit system files on computers half a country away. If I set the WINS server explicitly in the connection's IPv4 settings I don't have to use the FQN to ping the machine, but that doesn't change anything else. EDIT: The PC I'm having the issue on is running Win 7 Home Premium. After more testing I actually have two other PCs that work, one W7HP, one XP Home, and another Vista PC that doesn't work (not tested as much as the others), all four on the same internet connection (behind the same router). All of them were tested with a straight-forward, all defaults, new VPN configuration.

  Read the article

• How to find virtualization performance bottlenecks?

  - by Martin

  We have recently started moving our C++ build server(s) from real machines into VMs. (MS Hyper-V) We have some performance issues that I've currently no idea how to address. We have: Test-Box - this is a piece of desktop workstation hardware my co-worker used to set up the VM before we moved it to the actual server hardware Srv-Box - this is the server hardware Test-Box-Real - This is Windows running directly on the Test-Box HW Test-Box-VM - This is Windows in a Hyper-V VM on the Test-Box HW Srv-Box-Real- This is Server2008R2 running on the Srv-Box HW. Srv-Box-VM- This is Windows running in a Hyper-V VM on the Srv-Box HW, i.e. on Srv-Box-Real. Now, the problem is that we compared Build times between Test-Box-Real and Test-Box-VM and they were basically equal (within about 2%). Then we moved the VM to the Srv-Box machine and what we saw there is that we have a significant performance degradation between Srv-Box-Real and Srv-Box-VM, that is, where we saw no differences on the Test HW we now do see major differences in performance on the actual Server HW. (Builds about ~~ 50% slower inside the VM.) I should add that both the Test-Box and the Srv-Box are only running this one single VM and doing nothing else. I should also note that the "Real" OS is Win2008R2(64bit) and the VM hosted OS is Wind2003R2(32bit). Hardware specs: Srv-Box: Intel XEON E5640 @ 2.67Ghz (This means 8 cores with hyperthreading on the Real system and "only" 4 cores on the VM, since Hyper-V doesn't allow for hyperthreading, but number of cores doesn't seem to explain the problem here.) 16GB RAM (we have 4GB assigned to the VM) Virtual DELL RAID 1 (2x 450GB HUS156045VLS600 Hitachi 15k SAS drives) Test-Box: Intel XEON E31245 @ 3.3GHz 16GB RAM WD VelociRaptor 600GB 10k RPM SATA Note again that I'm only concerned with the differences between Srv-Box-Real and Srv-Box-VM (high) vs. the differences seen btw. Test-Box-Real and Test-Box-VM (low). Why would one machine have parity when comparing VM vs Real performance and the other (server grade HW no less) would have a large disparity? (Both being XEON CPUs ...)

  Read the article

• Drop outs when accessing share by DFS name.

  - by Stephen Woolhead

  I have a strange problem, aren't they all! I have a DFS root \domain\files\vms, it has a single target on a different server than the namespace. I can copy a test file set from the target directly via \server\vms$\testfiles and all is well, the files copy fine. I have repeated these tests many times. If I try and copy the files from the dfs root I get big pauses in the network traffic, about 50 seconds every couple of minutes, all the traffic just stops for the copy. If I start another copy between the same two machines during this pause, it starts copying fine, so I know it's not an issue with the disks on the server. Every once in a while the copy will fail, no errors, the progress bar will just zip all the way to 100% and the copy dialog will close. Checking the target folder show that the copy is incomplete. I've moved the LUN to another server and had the same problem. The servers are all 2008 R2, the clients are Vista x64, Windows7 x64 and 2008 R2, all have the same problem. Anyone got any ideas? Cheers, Stephen More Information: I've been running a NetMon trace on the connection when the file copy fails and what seems to be standing out is that when opening a file that the copy completes on the SMB command looks like this: SMB2: C CREATE (0x5), Name=Training\PDC2008\BB34 Live Services Notifications, Awareness, and Communications.wmv@#422082, Context=DHnQ, Context=MxAc, Context=QFid, Context=RqLs, Mid = 245376 SMB2: R CREATE (0x5), Context=MxAc, Context=RqLs, Context=DHnQ, Context=QFid, FID=0xFFFFFFFF00000015, Mid = 245376 But for the last file when the copy dialog closes looks like this: SMB2: C CREATE (0x5), Name=gt\files\Media\Training\PDC2008\BB36 FAST Building Search-Driven Portals with Microsoft Office SharePoint Server 2007 and Microsoft Silverlight.wmv@#859374, Context=DHnQ, Context=MxAc, Context=QFid, Context=RqLs, Mid = 77 SMB2: R , Mid = 77 - NT Status: System - Error, Code = (58) STATUS_OBJECT_PATH_NOT_FOUND The main difference seems to be in the name, one is relative to the open file share, the other has gained the gt\files\media prefix which is the name of the DFS target. These failures are always preceded by logoff and back on of the SMB target. Might have to bump this one to PSS.

  Read the article

• certutil -ping fails with 30 seconds timeout - what to do?

  - by mark

  The certificate store on my Win7 box is constantly hanging. Observe: C:\1.cmd C:\certutil -? | findstr /i ping -ping -- Ping Active Directory Certificate Services Request interface -pingadmin -- Ping Active Directory Certificate Services Admin interface C:\set PROMPT=$P($t)$G C:\(13:04:28.57)certutil -ping CertUtil: -ping command FAILED: 0x80070002 (WIN32: 2) CertUtil: The system cannot find the file specified. C:\(13:04:58.68)certutil -pingadmin CertUtil: -pingadmin command FAILED: 0x80070002 (WIN32: 2) CertUtil: The system cannot find the file specified. C:\(13:05:28.79)set PROMPT=$P$G C:\ Explanations: The first command shows you that there are –ping and –pingadmin parameters to certutil Trying any ping parameter fails with 30 seconds timeout (the current time is seen in the prompt) This is a serious problem. It screws all the secure communication in my app. If anyone knows how this can be fixed - please share. Thanks. P.S. 1.cmd is simply a batch of these commands: certutil -? | findstr /i ping set PROMPT=$P($t)$G certutil -ping certutil -pingadmin set PROMPT=$P$G EDIT1 I have succeeded to pin down the single windows API that causes the problem - DsGetDcName According to the windbg, the certutil -ping invokes it like so: PDOMAIN_CONTROLLER_INFO pdci; DWORD ret = ::DsGetDcName(NULL, NULL, NULL, NULL, DS_DIRECTORY_SERVICE_PREFERRED, &pdci); On my workstation it times out for 30 seconds and then returns error code 1355, which is ERROR_NO_SUCH_DOMAIN No domain controller is available for the specified domain or the domain does not exist. On another machine, which is accidentally a windows server 2003, it returns almost immediately with the correct domain controller name inside the returned DOMAIN_CONTROLLER_INFO structure. Now the question is what is missing on my workstation for that API to find the correct domain controller?

  Read the article

• The System Event Notification Service service terminated with the following error: Overlapped I/O operation is in progress

  - by user38923

  When I start my Windows 7, I get a notification The system event notification service could not be started.... As a result, I dont have Aero, even though my Windows Experience Index is 3.2. Aero used to work fine before today and I have not installed any new application. I have checked the event log and it reads: The System Event Notification Service service terminated with the following error: Overlapped I/O operation is in progress. I am not sure what this means. I have seen the services.msc and everything is fine there. Moreover the startup time has also extended and the Please wait stays for more than a minute. This is a sudden problem as everything used to work fine until today. For Aero I have tried starting Desktop Window manager (as pointed out by the trouble shooter), but with avail. From what I could understand from the forums, the lack of Aero and increased start-up time comes from a single problem of the System Event Notification Service. This is a personal Computer and I have no active directories installed.

  Read the article

• Bypassing Router's DNS Settings

  - by Ramon Marco Navarro

  Is there a way to bypass my ISP provided CPE/router's DNS settings? I'd like to use OpenDNS but I am unable to access the administrator acount of the CPE. I tried logging in using the default passwords (admin/admin, admin/1234, etc) to no avail. I found out later that the admin password is generated using a generator where you input the CPE's MAC address. I tried emailing the manufacturer of the CPE (Huawei, the CPE is Huawei BM625) and my ISP but they aren't replying. I also saw similar queries (lots of them!) at Huawei's forums, without a single reply. So as a last resort, I'd like to know a way to bypass the CPE's DNS settings. My subscription is for a WiMAX service. I'm using Windows 7 and have already set the DNS settings for the Local Area Connection. But I still am not seeing the "You are already using OpenDNS" text at OpenDNS's site. And when explicitly using the OpenDNS servers I still seem to get 208.69.38.150 rather than the expected 208.69.38.160: nslookup www.opendns.com. 208.67.222.222 Server: resolver1.opendns.com Address: 208.67.222.222 Non-authoritative answer: Name: www.opendns.com Address: 208.69.38.150

  Read the article

• Replacing DropBox with: Amazon S3 + SSL + GPG/TrueCrypt + Mounting on OSX ??

  - by Matt Rogish

  So, right now we're using DropBox to share various data files around between approximately 10 Mac OS X systems. However, we already have an S3 account and everyone on the lowest DropBox plan of $10/mo seems too expensive. We'd like to avoid any kind of local storage (share a disk on a desktop or something) since we're a geographically distributed team). So, I am contemplating something that would allow us to replace DropBox with our own home-grown solution. We are all fairly technical people and/or smart enough to follow some steps, so if it's not as "user friendly" as DropBox we're all comfortable with that. There are plenty of docs out there that have bits and pieces of what I want but some of the tools don't seem to fit the requirements: Transport security via SSL to the bucket Encryption of bucket contents Bi-directional syncing Most of the scripts I can find on the internet use "duplicity" which appears to fail #1 (it doesn't look like duplicity supports SSL to S3 - the docs don't state but the protocol looks plain old http http://www.nongnu.org/duplicity/duplicity.1.html#sect6 ) Many scripts use gpg to encrypt files. This seems like it could work, however I have to make sure that each OSX client is able to use the same key to encrypt and decrypt files (key management is left to me to manage). FTP and other client-based apps don't seem to support this at all. Finally, most of the scripts use one-way replication, e.g. using Amazon S3 as a simple backup store. As we'd be using Amazon S3 as the "repository" they fail this one. Whew. So, I'd love a single tool that does this but after an exhaustive search I don't think one exists. In my mind, the magical tool would be some combination of TrueCrypt and rsync. I'd be happy just knowing which tools out there can fulfill my 3 requirements, after that I can stitch together the rest. Any thoughts? THANKS!

  Read the article

• Basic 301 Redirection Help

  - by Marc

  I am trying to learn redirection for a WordPress site of my own. I am testing the concept of redirecting a single WordPress post by using a dummy site. However, it doesn't seem to be working for me. I am trying to redirect www.perfectmatchmaker[dot]org/finding-the-right-matchmaker to www.perfectmatchmaker[dot]org/finding-the-perfect-matchmaker I read that using the following is how to do this: Redirect 301 /old.html http://www.you[dot]com/new.html So this is what my .htaccess file currently looks like: # Use PHP5 as default AddHandler application/x-httpd-php5 .php # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress Redirect 301 /finding-the-right-matchmaker.html http://www.perfectmatchmaker.org/finding-the-perfect-matchmaker.html I've also tried removing the ".html". The redirection of the URL is finally working, but the URL shows no posts available. If I try to redirect the other post on the site by adding the following on the next line of the .htaccess file, I get an error that there is a "redirect loop" occurring. redirect 301 /find-love-and-your-perfect-match-through-the-use-of-a-match-maker http://www.perfectmatchmaker.org/find-love-and-your-perfect-match Any help you can provide me would be much appreciated. Thanks! Marc

  Read the article

• Apache: https to https redirect

  - by Klaas van Schelven

  I'm trying to get Apache to redirect all http and https traffic to a single endpoint www.example.org. The http part is easy: <VirtualHost *:80> ServerName example.org Redirect permanent / https://www.example.org/ </VirtualHost> # long list of other domains, all redirecting to https://www.example.org/ <VirtualHost *:80> ServerName www.example.org Redirect permanent / https://www.example.org/ </VirtualHost> I'm trying to do something similar for the https. It is my understanding that I need to specify one specific IP address, because the Host directive is also sent encrypted. So the below works: <VirtualHost xx.xx.xx.xx:443> ServerName www.example.org # actual stuff happening here </VirtualHost> However, when I start adding the redirects to the config, like so: <VirtualHost xx.x.xx.xx:443> ServerName example.org Redirect permanent / https://www.example.org/ </VirtualHost> # long list of other domains stuff breaks. $ apache2ctl configtest [warn] VirtualHost xx.xx.xx.xx:443 overlaps with VirtualHost xx.xx.xx.xx:443, the first has precedence, perhaps you need a NameVirtualHost directive If I add a directive like so: NameVirtualHost xx.xx.xx.xx:443 Connecting to the (ssl part of the) server starts to fail. How do I solve this?

  Read the article

• WebDav rename fails on an Apache mod_dav install behind NginX

  - by The Daemons Advocate

  I'm trying to solve a problem with renaming files over WebDav. Our stack consists of a single machine, serving content through Nginx, Varnish and Apache. When you try to rename a file, the operation fails with the stack that we're currently using. To connect to WebDav, a client program must: Connect over https://host:443 to NginX NginX unwraps and forwards the request to a Varnish server on http://localhost:81 Varnish forwards the request to Apache on http://localhost:82, which offers a session via mod_dav Here's an example of a failed rename: $ cadaver https://webdav.domain/ Authentication required for Webdav on server `webdav.domain': Username: user Password: dav:/> cd sandbox dav:/sandbox/> mkdir test Creating `test': succeeded. dav:/sandbox/> ls Listing collection `/sandbox/': succeeded. Coll: test 0 Mar 12 16:00 dav:/sandbox/> move test newtest Moving `/sandbox/test' to `/sandbox/newtest': redirect to http://webdav.domain/sandbox/test/ dav:/sandbox/> ls Listing collection `/sandbox/': succeeded. Coll: test 0 Mar 12 16:00 For more feedback, the WebDrive windows client logged an error 502 (Bad Gateway) and 303 (?) on the rename operation. The extended logs gave this information: Destination URI refers to different scheme or port (https://hostname:443) (want: http://hostname:82). Some other Restrictions: Investigations into NginX's Webdav modules show that it doesn't really fit our needs, and forwarding webdav traffic to Apache isn't an option because we don't want to enable Apache SSL. Are there any ways to trick mod_dav to forward to another host? I'm open to ideas :).

  Read the article

• kickstart: reference floppy drive via %ksappend or %include

  - by virtualeyes

  Having trouble getting %ksappend or %include to work when referencing a local floppy drive. Booting off remote server's cd-rom drive I am able to load the CentOS 6 minimal install image, and then add ks=hd:fd0/ks-jvm.cfg to boot params to load kickstart init file from floppy disk. That works fine. The problem is that I want to load a streamlined generic init file off the floppy and then, within the init, %ksappend or %include specific config files relative to the type of server I'm building (JVM, MySQL, Apache, etc.) I do not have DHCP, networking needs to be specified statically, so %ksappend and %include both fail when attempting to reference http://some-LAN-IP/foo.cfg since networking has not yet been set. The kickstart setup only works when I glob in the entire config into a single file, which is great, but ugly and difficult to maintain when I return later, having forgotten the original setup. At this point I'd be happy if I could get %ksappend or %include working with a floppy drive reference in the %post section; that would consolidate a lot of common boilerplate that all kickstarts will rely on (sshd_config, rsync config, resolve.conf, and so on) Thanks for providing the magic floppy drive reference that is eluding me!

  Read the article

• Web based KVM management for Ubuntu

  - by Tim

  Hey all, We've got a single Ubuntu 9.10 root server on which we want to run multiple KVM virtual machines. To administer these virtual machines I'd like a web based KVM management tool, but I don't know which one to choose from the list of tools mentioned on linux-kvm.org. I've used virsh & virt-manager on my desktop, but would like a web interface for the server. I tested ConVirt on my desktop, but it failed to pickup KVM machines from virsh / virt-manager, and I could not get KVM virtual machine import to work (only Xen). oVirt looks good, but I can't find out if and how I can install it on Ubuntu 9.10.. (And I'd really rather not waste another few days on testing stuff that might not work in the end.) Can anyone recommend any good web based KVM management tools that are easy to install on Ubuntu 9.10? I'm looking for something that will also allow me to run other services like apache and postgresql besides hosting virtual machines, so preferably fairly lightweight & no dedicated OS installs. We don't need any professional clustering / migration or anything, just something that will let us create, start, inspect, administer & stop virtual machines from a web page. Best regards, Tim

  Read the article

• Can I subnet a subnet?

  - by Portman

  Apologies in advance for the botched terminology. I have read the Server Fault Subnet Wiki but this is more of an ISP question. I currently have a /27 block of public IPs. I use give my router the first address in this pool and then use 1-to-1 NAT for all the servers behind the firewall, so that they each get their own public IP. The router/firewall is currently using (actual addresses removed to protect the guilty): IP Address: XXX.XXX.XXX.164 Subnet mask: 255.255.255.224 Gateway: XXX.XXX.XXX.161 What I would like to do is break out my subnet into two separate /28 subnets. And do this in a way that is transparent to the ISP (i.e., they see me as continuing to operate a single /27). Currently, my topology looks like: ISP | [Router/Firewall] | [Managed Ethernet Switch] / \ \ [Server1] [Server2] [Server3] (etc) Instead, I would like it to look like: ISP | [Switch] / \ [Router1] [Router2] | | | | [S1] [S2] [S3] [S4] (etc) As you can see, this would partition me into two separate networks. I'm struggling with what the correct IP settings would be on Router1 and Router2. Here's what I have right now: Router1 Router2 IP Address: XXX.XXX.XXX.164 XXX.XXX.XXX.180 Subnet mask: 255.255.255.240 255.255.255.240 Gateway: XXX.XXX.XXX.161 XXX.XXX.XXX.161 Note that normally you would expect Router2 to have a gateway of .177, but I'm trying to get them both to use the gateway originally given to me by the ISP. Is subnetting like this in fact possible, or am I completely botching the most basic concepts?

  Read the article

• IIS7 bulk bindings in vbscript , how to remove a binding

  - by minus4

  I have a script to manage adding over a thousand domains to a single site bindings, this has gone fine, but now client wants about 20 of them removed, Microsoft programmers don't think it would be nice to sort the bindings alphabetically, so does anyone know the code to remove the domains ( array list ) in bulk please. this is what i am using: Set adminManager = createObject("Microsoft.ApplicationHost.WritableAdminManager") adminManager.CommitPath = "MACHINE/WEBROOT/APPHOST" Set sitesSection = adminManager.GetAdminSection("system.applicationHost/sites", "MACHINE/WEBROOT/APPHOST") Set sitesCollection = sitesSection.Collection siteElementPos = FindElement(sitesCollection, "site", Array("name", "microsites")) If siteElementPos = -1 Then WScript.Echo "Element not found!" WScript.Quit End If on error resume next Set siteElement = sitesCollection.Item(siteElementPos) Set bindingsCollection = siteElement.ChildElements.Item("bindings").Collection Dim arrFileNames : arrFileNames = Array("list of domains") Dim objDict : Set objDict = CreateObject("Scripting.Dictionary") Dim strFileName, strTemp For Each strFileName In arrFileNames Set bindingElement = bindingsCollection.CreateNewElement("binding") bindingElement.Properties.Item("protocol").Value = "http" bindingElement.Properties.Item("bindingInformation").Value = "192.168.100.19:80:" & strFileName bindingsCollection.AddElement(bindingElement) Next adminManager.CommitChanges() WScript.Echo "Job Completed" WScript.Quit Function FindElement(collection, elementTagName, valuesToMatch) For i = 0 To CInt(collection.Count) - 1 Set element = collection.Item(i) If element.Name = elementTagName Then matches = True For iVal = 0 To UBound(valuesToMatch) Step 2 Set property = element.GetPropertyByName(valuesToMatch(iVal)) value = property.Value If Not IsNull(value) Then value = CStr(value) End If If Not value = CStr(valuesToMatch(iVal + 1)) Then matches = False Exit For End If Next If matches Then Exit For End If End If Next If matches Then FindElement = i Else FindElement = -1 End If End Function so as you can see it is easy to add, but i can find no code or manual or instructions for the removal. i cant seem to run appcmd either. at first i tried creating a batch file using the appcmd but this never worked, saying appcmd can not be found. thanks

  Read the article

• How to repair multiple KDC an Netlogon errors

  - by Keith Sirmons

  Howdy, I have several erros in the system event log of my single Windows 2003 SP2 domain controller. Multiple member computers on the domain are listed in these errors. I am seeing two similar errors for each computer one second apart in the event log. Event ID 7 Source KDC The Security Account Manager failed a KDC request in an unexpected way. The error is in the data field. The account name was [email protected] and lookup type 0x8. followed by Event ID 7 Source KDC The Security Account Manager failed a KDC request in an unexpected way. The error is in the data field. The account name was MEMBERNAME$ and lookup type 0x8. The Lookup Types are also different, I have 0x8, 0x28, 0x0, 0x20. I am also receiving other authentication errors in the same time frame as all of the KDC errors Event ID 5722 Source NETLOGON The session setup from the computer MEMBERNAME failed to authenticate. The name(s) of the account(s) referenced in the security database is MEMBERNAME$. The following error occurred: Access is denied. I have run dcdiag /v to see if there was something wrong with Active Directory, but all tests passed. I also ran netdiag /v and it appers all of those tests ran. Any ideas on where to start for this issue? Thank you, Keith

  Read the article

• Per client DNS server assignment using Pfsense

  - by Trix

  I have a network where pfsense is the gateway. There are two sets of clients that I want. One where there will be some restrictions to the network (example, IM being blocked) and one network where there are no restrictions. One easy way I thought about doing this was assigning the different domains different DNS servers. One set could use OpenDNS, the other could use Google's Public DNS. The set with OpenDNS would have the filter options on (using OpenDNS' dashboard, I can check block IM .... so I do not manually need to block login.oscar.aol.com, meebo.com, gmail chat ....etc). So the problem is the DHCP server looks like it will only assign a single set of DNS servers to clients. Is there a way to set a per client assignment? Is there a better way to obtain what I want to obtain. This is just a small home network. I do not need anything fancy, but I do need this functionality in one way or another.

  Read the article

• VLAN support on Juniper EX - 2200 switches

  - by liv2hak

  I have 6 Juniper switches (EX - 2200) connected to each other as shown in the network topology below. I have two PC's that I am using PC1 - (used for configuring the 6 switches via minicom) PC2 - to monitor the traffic between the switches via the Ports that are marked with arrows in the diagram. STEP 1: I create a new vlan On Switch 3 (SW3) that includes Port 12 and Port 22. I also assign l3-interface to the vlan (vlan_2) with ip address - 192.168.1.7. Now I plug-in Port 0 of Switch 3 on PC2. Now I try pinging 192.168.1.7 from PC2 (192.168.1.10) I want to know what will happen? My postulation is that I will not be able to ping SW3 from PC2.This is because SW3 (Port 12 and Port 22) is a part of a vlan_2 and vlan_2 logically breaks up broadcast domains and so 192.168.1.7 will not be reachable from 192.168.1.10. Now I have an l3-interface on SW1 with IP 192.168.1.1 using default vlan( vlan-id 0). Similarly I have enabled IP on SW2 - 192.168.1.2 SW3 - 192.168.1.3 SW4 - 192.168.1.4 SW5 - 192.168.1.5 SW6 - 192.168.1.6 all using default vlan. Now I plug in Port 12 of SW3 (blue cable) into the PC2. I try to ping 192.168.1.1 from PC2. What will happen at this stage.? My postulation is that I will be able to ping switch 1.Is this correct? Also another question is that can a single port on a Switch be added multiple VLANS? I am a beginner at network configuration? Any help would be highly appreciated. (Please ignore the CISCO symbol on the switches in the diagram.All swithes are Junper EX 22-00.)

  Read the article

• Find a non-case-sensitive text string within a range of cells

  - by Iszi

  I've got a bit of a problem to solve in Excel, and I'm not quite sure how to go about doing it. I've done a few searches online, and haven't really found any formulas that seem to be useful. Here's the situation (simplified just a bit, for the purpose of this question): I have data in columns A-E. I need to match data in the cells in A and B, with data in C-E, and return TRUE or FALSE to column F. Return TRUE if: - The string in A is found within any string in C-E. OR - The string in B is found within any string in C-E. Otherwise, return FALSE. The strings must be exact matches for whole or partial strings within the range, but the matching function must be case-insensitive. I've taken a screenshot of an example sheet for reference. I'm fairly sure I'll need to use IF or on the outermost layer of the formula, probably followed by OR. Then, for the arguments to OR, I'm expecting there will be some use of IFERROR involved. But what I'm at a loss for is the function I could most efficiently use to handle the text string searches. VLOOKUP is very limited in this regard, I think. It may be workable to do whole-string against whole-string comparisons, but I'm fairly certain it won't return accurate results for partial string matches. FIND and SEARCH appear limited to only single-target searches, and are also case-sensitive. I suppose I could use UPPER or LOWER to force case-insensitivity in the search, but I still need something that can do accurate partial matching and search a specified range of cells. Is there any function, or combination of functions, that could work here? Ideally, I want to do this with a straight Excel formula. I'm not at all familiar with VBScript or similar tools, nor do I have time to learn it for this project.

  Read the article

• Can compressing Program Files save space *and* give a significant boost to SSD performance?

  - by Christopher Galpin

  Considering solid-state disk space is still an expensive resource, compressing large folders has appeal. Thanks to VirtualStore, could Program Files be a case where it might even improve performance? Discovery In particular I have been reading: SSD and NTFS Compression Speed Increase? Does NTFS compression slow SSD/flash performance? Will somebody benchmark whole disk compression (HD,SSD) please? (may have to scroll up) The first link is particularly dreamy, but maybe head a little too far in the clouds. The third link has this sexy semi-log graph (logarithmic scale!). Quote (with notes): Using highly compressable data (IOmeter), you get at most a 30x performance increase [for reads], and at least a 49x performance DECREASE [for writes]. Assuming I interpreted and clarified that sentence correctly, this single user's benchmark has me incredibly interested. Although write performance tanks wretchedly, read performance still soars. It gave me an idea. Idea: VirtualStore It so happens that thanks to sanity saving security features introduced in Windows Vista, write access to certain folders such as Program Files is virtualized for non-administrator processes. Which means, in normal (non-elevated) usage, a program or game's attempt to write data to its install location in Program Files (which is perhaps a poor location) is redirected to %UserProfile%\AppData\Local\VirtualStore, somewhere entirely different. Thus, to my understanding, writes to Program Files should primarily only occur when installing an application. This makes compressing it not only a huge source of space gain, but also a potential candidate for performance gain. Testing The beginning of this post has me a bit timid, it suggests benchmarking NTFS compression on a whole drive is difficult because turning it off "doesn't decompress the objects". However it seems to me the compact command is perfectly capable of doing so for both drives and individual folders. Could it be only marking them for decompression the next time the OS reads from them? I need to find the answer before I begin my own testing.

  Read the article

• qemu-img: Could not open $FILE

  - by HTTP500

  I received a single-file VMDK from a vendor that has a virtual appliance for a particular product I'm interested in evaluating. We run a KVM solution (Proxmox) so I tried converting the file but on that system qemu-img blows up. (I was able to convert (multipart) VMDK files from bitnami without error.) So I figured I'll just yum install qemu-img on a RHEL 6.3 VM and do it there. But despite the fact that I can file the file just fine when I run qemu-img on it I get this error that it can't open the file: [root@host dir]# file 1.vmdk 1.vmdk: VMware4 disk image [root@host dir]# qemu-img info 1.vmdk qemu-img: Could not open 'vmdk' I've seen some other people post on the interwebs that they've had this problem but none of them seem to have a resolution. Does anyone have any ideas? I have checked the MD5SUM already. EDIT1: [root@host dir]# qemu-img info -f vmdk 1.vmdk qemu-img: Could not open '1.vmdk' EDIT2: Ran strace per suggestion. Not sure what to look for... Here is a possible: ioctl(3, CDROM_DRIVE_STATUS, 0x7fffffff) = -1 ENOTTY (Inappropriate ioctl for device)

  Read the article

• How to configure Apache and Tomcat with vhosts?

  - by Umar Farooq Khawaja

  I have a server with a static, public IP address. I also have a registered domain name. For the sake of illustration, let's suppose they are IP Address: 12.34.56.78 Domain Name: example.com I have a single machine on which I am running the following: A website (over IIS7) available locally at localhost:80 A JetBrains TeamCity instance (over Tomcat) available locally at localhost:1234 A VisualSVN Server instance (over Apache) available locally at localhost:5678/svn I have set up an A record for example.com and the following CNAME records: www.example.com builds.example.com sources.example.com I would like to configure Tomcat and Apache such that: if I point my browser at builds.example.com, I end up at the JetBrains TeamCity instance and, if I point my browser at sources.example.com, I end up at the VisualSVN Server instance. I thought I could configure the Apache to vhost example.com:5678/svn to point to sources.example.com and added the following lines to the Apache httpd.conf file Listen 5678 NameVirtualHost *:5678 <VistualHost *:5678> ServerName sources.example.com DocumentRoot /svn </virtualHost> That broke the VisualSVN instance, so I had to revert that to Listen 5678 Help!

  Read the article

• Asus P5Q doesn't post at all

  - by Sebi

  I had a very strange incident this evening. I was watching TV on the computer and suddenly the sound stutter. Some seconds later, the screen went black. First I thought ok some error, don't worry. Since the computer didn't react on any input from the mouse or keyboard, I shutted it down by pressing the power button. I tried to reboot but the monitor rest black. All the fans were running, the MB didn't made a beep and the leds are all green as they have to be. The HDD is running too, also the monitor is on. But nothing happens, not even a single message on the screen, just black. Here are the things I already tried with no success: tried to boot with 1 of two rams (each tested alone) turned off all power (pull th plug) for 10 minutes tested the graphic card with another pc. there it worked. tested the RAM with another pc. there it worked. Any hints what to do next?

  Read the article

• Nginx dynamic upstream configuration / routing

  - by Dan Sosedoff

  I was experimenting with dynamic upstream configuration for nginx and cant find any good solution to implement upstream configuration from third-party source like redis or mysql. The idea behind it is to have a single file configuration in primary server and proxy requests to various app servers based on environment conditions. Think of dynamic deployments where you have X servers that are running Y workers on different ports. For instance, i create a new app and deploy. App manager selects a server and then rolls out a worker (Ruby/PHP/Python) and then reports the ip:port to the central database with status "up". At this time when i go to the given url nginx should proxy all requests to the specified ip:port upstream. The whole thing is pretty similar to what heroku does, except this proof-of-concept is not supposed to be production ready, mostly for internal needs. The easiest solution i found was using resolver with ruby-based DNS server. It works, nginx gets the IP address correctly, but the only problem is that you cant define port number for that IP. Second solution (which i havent tried yet) is to roll something else as a proxy server, maybe written in Erlang. In this case we need to use something to serve static content. Any ideas how to implement this in more flexible and stable way? P.S. Some research options: http://openresty.org/#DynamicRoutingBasedOnRedis https://github.com/nodejitsu/node-http-proxy

  Read the article

• best practice to removing DC from Site that no longer connects via vpn in another city

  - by dasko

  hi i am looking for a recap of what i have done already to see if i missed anything. i had two cities connected by wan using a ipsec persistent tunnel between gateways. i had one DC (DOMAIN CONTROLLER) in each city that was a global catalog server (GC) they were set up to replicate and i had them configured under Sites and Servers with their own subnet etc... about 6 months ago the one city was removed and i was not able to gracefully remove, through dcpromo, the server that was there. it is no longer used and cannot be brought back. the company went from two sites down to single site. Problem is i had a whole bunch of kcc errors and replication bugs in the event viewer. i wanted to clean up my active directory and decided to use the ntdsutil metadata cleanup commands. i removed the server from the specifed site based on a procedure from petri website. I then removed the instances of the old DC and site from Sites and Servers. Then i went and cleaned up the DNS by removing Host A records, NS server name from both the local DNS forward lookup zone and the _msdcs i also removed the reverse lookup zone for the subnet that no longer exists. is there anything i missed? thanks in advance for any help. gd

  Read the article

• SAN with iSCSI-Target Performance Horrendous

  - by Justin

  We have a poor man's SAN setup in a 1U Ubuntu server running iSCSI-Target with two 300GB drives in RAID-0. We then are using it for block level storage for virtual machines. The hypervisor is connected to the SAN via gigabit on a dedicated VLAN and interfaces. We only have a single virtual machine setup and doing some benchmarks. If we run hdparm -t /dev/sda1 from the virtual machine, we get 'ok' performance of 75MB/s from the virtual machine to the SAN. Then we basically compile a package with ./configure and make. Things start ok, but then all the sudden the load average on the SAN grows to 7+ and things slow down to a crawl. When we SSH into the SAN and run top, sure the load is 7+, but the CPU usage is basically nothing, also the server has 1.5GB of memory available. When we kill the compile on the virtual machine, slowly the LOAD on the SAN goes back to sub 1 figures. What in the world is causing this? How can we diagnosis this further? Here are two screenshot from the SAN during high load. 1> Output of iotop on the SAN: 2> Output of top on the SAN:

  Read the article

< Previous Page | 481 482 483 484 485 486 487 488 489 490 491 492  | Next Page >