Search Results

Search found 15055 results on 603 pages for 'volume shadow copy'.

Page 485/603 | < Previous Page | 481 482 483 484 485 486 487 488 489 490 491 492  | Next Page >

• raid 0 data recovery?

  - by Fred

  HI All, I have two identical seagate 7200.9 500Gb drives confiured as a RAID 0 spanned disk in windows. One of the drives has lost power and wont spin up at all. I know this normally means death for the data on both drives but i have a cunning plan.. DISK 1 - NO POWER RAID 0 DISK DISK 2 - FULLY FUNCTIONAL RAID 0 DISK DISK 3 - FULLY FUNCTIONAL SPARE DISK Copy the working drive (disk 2) data to a third 500GB DISK (disk 3), remove the logic board from the working disk (disk 2) and replace it with the non working logic board on the broken drive (disk 1) , then hopefully recreate the RAID 0 with disk 1 and disk 3, just long enough to get the data off it. Hope this makes sense, here are my questions: Windows disk manager atm recognises disk 2 but wont let me access it in anyway, therefore copying the data off it (or getting a disk image) cant be done in windows. Does anyone know of any software (in linux or self booting) that would allow me to access this disk? Anyone know of any software that will recreate the spanned drive off two disk images Am i missing any key information that means i definitely shouldn't even bother starting this, i know its a long shot anyway but its worth a try unless i definitely cant do it. The irritating thing is that i am sure its a logic board failure on disk 1 as it simply wont power up at all, suddenly no signs of life, so i am sure the data is intact! Any help would be really appreciated! Thanks

  Read the article

• Backing up SQL NetApp Snapshots using TSM

  - by WerkkreW

  In our environment we have a 3 node SQL 2005 Cluster which is on NetApp storage. We are currently using SMSQL (NetApp SnapManager for SQL) to take Snapshot backups of the data. This works great, but due to some audit requirements we are also forced to maintain some copies on tape. We have used NDMP in other places across the enterprise but we do not want to use it in this specific instance. Basically what I need to do is, get the most recent snapshot copy of the databases on tape, via Tivoli Storage Manager (TSM). What I have done is, obtained a basic Windows Server 2003 VM with SnapDrive installed, which is SAN attached and zoned to the NetApp, and I have written a batch file to do the following: Mount the latest __RECENT snapshot lun to the host, using a specific drive letter Perform a TSM based incremental backup Dis-mount the LUN This seems to work fine, except sometimes the LUN's do not mount due to some sort of timeout. Also, due to my limited knowledge of windows batch scripting, I have no way to monitor the success or failure of these backups since I do not know how to send a valid return code back to the TSM scheduling service. Is there a more efficient/elegant way to accomplish this without NDMP?

  Read the article

• How to burn a data DVD in Windows XP

  - by SabreWolfy

  I am trying to burn a data DVD (DVD+R) in Windows XP SP3 on a Dell desktop computer. The computer has a licensed copy of Nero 6.3. Nero indicates that an update to version 6.6 is available, but after following the link provided, it redirects me to the Nero website to purchase the upgrade. I'm not interested in doing this. After creating a project in Nero 6.3, inserting a blank DVD+R and trying to start burning the data DVD, Nero indicates that I should insert an appropriate disk into the drive. It does not seem to detect the blank DVD+R. I downloaded infrarecorder and cdrtfe from Sourceforge. Neither of these programs worked either. They both indicated that I should insert the correct media, with cdrtfe saying there is no disk in the drive. I tried with another blank DVD +R with the same effect. I inserted a CDR containing data into the drive and the Windows read read this CDR without a problem. I have no reason to believe that the drive is faulty. I am aware that Windows XP itself is not able to burn DVDs. However, it seems that three third-party software programs are not able to burn a data DVD in Window XP. The specifications provided in Nero indicate that DVD+R is compatible with the drive. How can I burn a backup data DVD in Windows XP?

  Read the article

• Truncated content with Apache on Vagrant VM

  - by Nev Stokes

  I'm using Vagrant to run a CentOS VM in order to try and achieve local development parity with our live servers. I've symlinked /var/www/html with the /vagrant shared directory and am forwarding port 80 for viewing at http://localhost:4567. I'm developing using SublimeText 2 on OS X Mountain Lion. Once I figured that iptables was tripping me up, all was well and good. Until I noticed something strange. I have a sample HTML page consisting of several paragraphs of lorem copy. I can view this fine in a browser on OS X. But when I make an edit, for example removing a paragraph, and refresh the content is truncated with the paragraph I deleted still visible. When I cat the files on the server I can see the changes I made but these aren't even reflected when I curl localhost. I strongly suspect that it's a problem with my Apache settings — with which I didn't really tinker — as the issue doesn't arise when I stop Apache and run sudo python -m SimpleHTTPServer 80 in the directory to view pages instead. What gives?

  Read the article

• Using WebDAV for automated downloads

  - by Geo Ego

  I currently manage a number of sites (at one point about a dozen, currently four, but soon growing into the dozens or hundreds) that serve a piece of software to clients at their remote locations. Our web server is Windows SBS Server 2k3, and the remote servers are Windows Server 2k3.When we have new versions of the software, I upload this new software to a specific directory and rename it; each time the clients boot, they pull their software from that specific directory. With just a few sites, it's no problem for me to RDP in and copy the files over. As the number grows, this will quickly become quite unwieldy. So I'm thinking that WebDAV would be part of a solution, so that I could simply push the newest version to our server (Windows SBS Server 2003) and make it available to the sites to grab. However, on the remote server side, what are some suggestions for automating the download? I only want the servers to download the files during downtime (between 3 AM and 9 AM), and I only want them to download if there is a new version available. I had thought of writing a program that checked the files on the WebDAV server at a regular interval, compared a hash of the current software to a hash of the software on the server, and only downloaded if they were different, but I'm wondering if there is something I am unaware of that can automate the process.

  Read the article

• Cisco Configuration backup with Windows Script.

  - by Jeff

  We have a client with a lot of Cisco Devices and we would like to automate the backups of these devices through telnet. We have both 2003 and 2008 servers and ideally use tftp to back it up. I wrote this: Set WshShell = WScript.CreateObject("WScript.Shell") Dim fso Set fso = CreateObject("Scripting.FileSystemObject") Dim ciscoList ciscoList = "D:\Scripts\SwitchList.txt" Set theSwitchList = fso.OpenTextFile(ciscoList, 1) Do While theSwitchList.AtEndOfStream <> True cisco = theSwitchList.ReadLine Run "cmd.exe" SendKeys "telnet " SendKeys cisco SendKeys "{ENTER}" SendKeys "USERNAME" SendKeys "{ENTER}" SendKeys "PASSWORD" SendKeys "{ENTER}" SendKeys "en" SendKeys "{ENTER}" SendKeys "PASSWORD" SendKeys "{ENTER}" SendKeys "copy startup-config tftp{ENTER}" SendKeys "(TFTP IP){ENTER}" SendKeys "FileName.txt{ENTER}" SendKeys "exit{ENTER}" 'close telnet session' SendKeys "{ENTER}" 'get command prompt back SendKeys "{ENTER}" SendKeys "exit{ENTER}" 'close cmd.exe On Error Resume Next WScript.Sleep 3000 Loop Sub SendKeys(s) WshShell.SendKeys s WScript.Sleep 300 End Sub Sub Run(command) WshShell.Run command WScript.Sleep 100 WshShell.AppActivate command WScript.Sleep 300 End Sub But the problem with this is the sendkeys are sent to the console session, I'm trying to find a solution that would not require a user to be logged in. Does anyone have any ideas? I have some knowlage of VBS, PowerShell and a pretty good grasp on batching.

  Read the article

• Asus K55VM usb 3.0 issue

  - by user2141481

  Good day superusers! I own the above laptop and I found out that there are some unknown and unusual issues with usb 3.0 ports. I haven't noticed anything strange until now. I got a new toshiba usb 3.0 external hdd and when I try to copy larger amount of data from my disk to the external hdd, the OS(windows 7) randomly starts ignoring the external hdd. It doesn't shut it down, it kinda just stops responding but the light on the hdd is still lit. I get an error that the files cannot be copied. I have reinstalled windows 7, installed all drivers(including intel chipset drivers of course) and the issue is still present. It acts normal when copying small amount of data. Also, I heard that some intel chipsets have an issue with usb, something about the connectors not transferring power when the usb device enters some kind of "low power mode" causing the device to stop responding and you need to plug it out and in again. But the thing is, my Intel® Chief River Chipset HM76 is not on the list of affected hardware(not ENTIRELY sure though). If anyone has any idea of what the problem to this might be, I'd be greatful. Edit: The hdd works perfectly fine even for large amounts of data if plugged in the usb 2.0 port!

  Read the article

• MAMP MySQL won't start

  - by Tony

  I uninstalled MAMP completely, downloaded fresh copy of MAMP 2 from the MAMP website, did a clean install. However, when I try to start mysql, I get the following error log 111120 21:37:49 mysqld_safe Starting mysqld daemon with databases from /Applications/MAMP/db/mysql 111120 21:37:50 [Warning] You have forced lower_case_table_names to 0 through a command-line option, even though your file system '/Applications/MAMP/db/mysql/' is case insensitive. This means that you can corrupt a MyISAM table by accessing it with different cases. You should consider changing lower_case_table_names to 1 or 2 111120 21:37:50 [Note] Plugin 'FEDERATED' is disabled. 111120 21:37:50 InnoDB: The InnoDB memory heap is disabled 111120 21:37:50 InnoDB: Mutexes and rw_locks use GCC atomic builtins 111120 21:37:50 InnoDB: Compressed tables use zlib 1.2.3 111120 21:37:50 InnoDB: Initializing buffer pool, size = 128.0M 111120 21:37:50 InnoDB: Completed initialization of buffer pool 111120 21:37:50 InnoDB: highest supported file format is Barracuda. 111120 21:37:50 InnoDB: Waiting for the background threads to start 111120 21:37:51 InnoDB: 1.1.5 started; log sequence number 1595675 111120 21:37:51 [ERROR] /Applications/MAMP/Library/bin/mysqld: unknown option '--skip-locking' 111120 21:37:51 [ERROR] Aborting 111120 21:37:51 InnoDB: Starting shutdown... 111120 21:37:51 InnoDB: Shutdown completed; log sequence number 1595675 111120 21:37:51 [Note] /Applications/MAMP/Library/bin/mysqld: Shutdown complete 111120 21:37:51 mysqld_safe mysqld from pid file /Applications/MAMP/tmp/mysql/mysql.pid ended I've no clue why this is happening. I googled around and made sure that no instance of MySQL is running. Nothing seems to help.

  Read the article

• Anti Virus Service does not run - Windows XP SP3 32bit Home

  - by Stefan Fassel

  I have a somewhat strange problem here. I am trying to run Anti Virus Software on my Windows XP Home 32bit System. After a serious crash I had to fall back to an outdated copy of my initial installation and had Windows install 5 years of updates. So far so good. After Intalling a new Anti Virus Software (Bitdefender 2012) everything seemed to be fine, initial scanning went fine and configuration was working. But after restarting the System the Virus Scanner was unable to start up again. Even the Configuration console of the AV Software did not start. I tried scanning the System for malware, but nothing was found. Then I tried a different AV Software (MS Security Essentials), but in the end it did fail to start too. I have tried to start the Service manually, but I seem to be missing the privilege to do so. I am logged in as a Non-"Administrator" User with Admin privileges (Not much choices there on a XP Home System). I cannot switch to Administrator account outside the protected mode. When running Windows in protected mode I am unable to start the AV Software because it does not run in protected mode. I am a bit at loss now...

  Read the article

• Configuring https access on HP A5120 Switch

  - by GerryEgan

  I am trying to configure HTTPS management on a HP a5120 switch running Version 5.20.99, Release 2215 and not having much luck. I have followed the manual by creating an SSL policy first and then enabling the HTTPS server with the SSL policy: ssl server-policy sslpol ip https ssl-server-policy sslpol ip https enable When I try and log onto the switch with Google Chrome I get the following error: Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error. When I look this up I have found references to errors due to TLS being used in SSL. I can find no way to specify the SSL version in the server policy. The manual has a configuration example that uses MSCEP to retrieve a certificate but in Windows 2008 R2 that feature is only available in Enterprise and Datacentre editions which I don't have. I have SSH configured and it is using a locally generated certificate so I'm not sure if I can use that but I'd like to if possible. Has anybody been able to setup HTTPS management on HP A series switches without MSCEP? Any and all help appreciated! here is a copy of my config with the interfaces removed: version 5.20.99, Release 2215 # sysname MYSYSNAME # irf domain 10 irf mac-address persistent timer irf auto-update enable undo irf link-delay # domain default enable system # telnet server enable # vlan 1 # vlan 100 description Management # radius scheme system primary authentication 127.0.0.1 1645 primary accounting 127.0.0.1 1646 user-name-format without-domain # domain system access-limit disable state active idle-cut disable self-service-url disable # user-group system group-attribute allow-guest # local-user admin password cipher authorization-attribute level 3 service-type ssh telnet terminal service-type web # stp enable # ssl server-policy sslpol pki-domain MYDOMAIN # interface NULL0 # interface Vlan-interface199 ip address 192.168.199.140 255.255.255.0 # interface GigabitEthernet1/0/1 poe enable stp edged-port enable # interface Ten-GigabitEthernet2/1/2 # dhcp-snooping # ntp-service unicast-server 192.168.1.71 # ssh server enable # ip https ssl-server-policy sslpol ip https enable # load xml-configuration # user-interface aux 0 1 user-interface vty 0 15 authentication-mode scheme

  Read the article

• Why does this rsnapshot exclude not work?

  - by bstpierre

  Rsnapshot passes excludes directly to rsync, but rsync's behavior appears inconsistent. I've simplified my rsnapshot backup test to the following directory tree (this tree will be backed up): gorilla:~# find /tmp/snaptest -exec file {} \; /tmp/snaptest: directory /tmp/snaptest/SKIPTHIS: directory /tmp/snaptest/SKIPTHIS/xyz: directory /tmp/snaptest/SKIPTHIS/xyz/testing: ASCII text /tmp/snaptest/SKIPTHIS/bar: ASCII text /tmp/snaptest/SKIPTHIS/foo: ASCII text /tmp/snaptest/SKIPTHIS.txt: ASCII text My config file: config_version 1.2 snapshot_root /tmp/backup-media no_create_root 1 cmd_cp /bin/cp cmd_rm /bin/rm cmd_rsync /usr/bin/rsync cmd_ssh /usr/bin/ssh cmd_logger /usr/bin/logger cmd_du /usr/bin/du interval hourly 6 interval daily 7 interval weekly 4 interval monthly 3 verbose 3 loglevel 3 logfile /media/maxtor-one-touch/rsnapshot.log lockfile /media/maxtor-one-touch/backups/.rsnapshot.pid rsync_short_args -a rsync_long_args --delete --numeric-ids --relative --delete-excluded exclude "SKIPTHIS/**" link_dest 1 backup /tmp/snaptest snaptest The result: gorilla:~# rsnapshot -c /tmp/snaptest.conf hourly echo 12638 > /media/maxtor-one-touch/backups/.rsnapshot.pid mkdir -m 0755 -p /tmp/backup-media/hourly.0/ /usr/bin/rsync -a --delete --numeric-ids --relative --delete-excluded \ --exclude="SKIPTHIS/**" /tmp/snaptest \ /tmp/backup-media/hourly.0/snaptest touch /tmp/backup-media/hourly.0/ rm -f /media/maxtor-one-touch/backups/.rsnapshot.pid gorilla:~# find /tmp/backup-media/ -exec file {} \; /tmp/backup-media/: directory /tmp/backup-media/hourly.0: directory /tmp/backup-media/hourly.0/snaptest: directory /tmp/backup-media/hourly.0/snaptest/tmp: sticky directory /tmp/backup-media/hourly.0/snaptest/tmp/snaptest: directory /tmp/backup-media/hourly.0/snaptest/tmp/snaptest/SKIPTHIS: directory /tmp/backup-media/hourly.0/snaptest/tmp/snaptest/SKIPTHIS/xyz: directory /tmp/backup-media/hourly.0/snaptest/tmp/snaptest/SKIPTHIS/xyz/testing: ASCII text /tmp/backup-media/hourly.0/snaptest/tmp/snaptest/SKIPTHIS/bar: ASCII text /tmp/backup-media/hourly.0/snaptest/tmp/snaptest/SKIPTHIS/foo: ASCII text /tmp/backup-media/hourly.0/snaptest/tmp/snaptest/SKIPTHIS.txt: ASCII text My confusion stems from the fact that if I copy-paste the rsync command echoed by rsnapshot, the SKIPTHIS directory is excluded! (I've tested with various other SKIPTHIS patterns with the same results.) Any idea what's going on?

  Read the article

• Does btrfs balance also defragment files?

  - by pauldoo

  When I run btrfs filesystem balance, does this implicitly defragment files? I could imagine that balance simply reallocates each file extent separately, preserving the existing fragmentation. There is an FAQ entry, 'What does "balance" do?', which is unclear on this point: btrfs filesystem balance is an operation which simply takes all of the data and metadata on the filesystem, and re-writes it in a different place on the disks, passing it through the allocator algorithm on the way. It was originally designed for multi-device filesystems, to spread data more evenly across the devices (i.e. to "balance" their usage). This is particularly useful when adding new devices to a nearly-full filesystem. Due to the way that balance works, it also has some useful side-effects: If there is a lot of allocated but unused data or metadata chunks, a balance may reclaim some of that allocated space. This is the main reason for running a balance on a single-device filesystem. On a filesystem with damaged replication (e.g. a RAID-1 FS with a dead and removed disk), it will force the FS to rebuild the missing copy of the data on one of the currently active devices, restoring the RAID-1 capability of the filesystem.

  Read the article

• Cannot load from raid with grub

  - by Andrew Answer

  I have a RAID1 array on my Ubuntu 12.04 LTS and my /sda HDD has been replaced several days ago. I use this commands to replace: # go to superuser sudo bash # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded" # remove broken disk from RAID mdadm /dev/md0 --fail /dev/sda1 mdadm /dev/md0 --remove /dev/sda1 # see partitions fdisk -l # shutdown computer shutdown now # physically replace old disk by new # start system again # see partitions fdisk -l # copy partitions from sdb to sda sfdisk -d /dev/sdb | sfdisk /dev/sda # recreate id for sda sfdisk --change-id /dev/sda 1 fd # add sda1 to RAID mdadm /dev/md0 --add /dev/sda1 # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded, recovering" # to see status you can use cat /proc/mdstat After bebuilding completion "fdisk -l" says what I have not valid partition table /dev/md0. So 1) "update-grub" find only /sda and /sdb Linux, not /md0 2) "dpkg-reconfigure grub-pc" says "GRUB failed to install the following devices /dev/md0" I cannot load my system except from /sdb1 and /sda1, but in DEGRADED mode... This is my partial fdisk -l output: Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000667ca Device Boot Start End Blocks Id System /dev/sdb1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sdb2 940910985 976768064 17928540 5 Extended /dev/sdb5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/md0: 481.7 GB, 481746288640 bytes 2 heads, 4 sectors/track, 117613840 cylinders, total 940910720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Anybody can resolve this issue? I have big headache with this.

  Read the article

• What's the best way to completely remove everything from a computer, without re-installing?

  - by Connor W

  I have a friend who wants to sell their computer, but obviously all personal information and software that it is on it needs to be removed before doing so. Usually I would format and reinstall it, but I cannot easily get hold of the required XP DVDs and I'm not 100% sure the serial number is stuck on the case as usual so getting hold of it will probably require more effort than I'm prepared to spend. So, what's the best and quickest way to remove and uninstall everything from the PC without reinstalling it? Thanks. EDITS: I'm looking to remove things like Internet History and all installed programs, too. I know how to remove the history and each individual program, but that could take hours. The machine is not branded and therefore there is no website I can go to download recovery software. There is no recovery partition on the computer and I'm not aware of any recovery DVDs for it either. I can only assume it was installed from a retail copy, and therefore there is no way to recover it to factory settings. It needs to have XP installed, not any distribution of Linux. Like most average people, the person getting the computer will not understand what to do with a computer that doesn't have Windows installed, and software like Office does not work on Linux either. Buying another licence is not really an option either. She has just brought a laptop to replace the computer, so buying another licence for a computer that she's getting rid of doesn't really make sense. Thanks for all the help so far!

  Read the article

• Security implications of adding www-data to /etc/sudoers to run php-cgi as a different user

  - by BMiner

  What I really want to do is allow the 'www-data' user to have the ability to launch php-cgi as another user. I just want to make sure that I fully understand the security implications. The server should support a shared hosting environment where various (possibly untrusted) users have chroot'ed FTP access to the server to store their HTML and PHP files. Then, since PHP scripts can be malicious and read/write others' files, I'd like to ensure that each users' PHP scripts run with the same user permissions for that user (instead of running as www-data). Long story short, I have added the following line to my /etc/sudoers file, and I wanted to run it past the community as a sanity check: www-data ALL = (%www-data) NOPASSWD: /usr/bin/php-cgi This line should only allow www-data to run a command like this (without a password prompt): sudo -u some_user /usr/bin/php-cgi ...where some_user is a user in the group www-data. What are the security implications of this? This should then allow me to modify my Lighttpd configuration like this: fastcgi.server += ( ".php" => (( "bin-path" => "sudo -u some_user /usr/bin/php-cgi", "socket" => "/tmp/php.socket", "max-procs" => 1, "bin-environment" => ( "PHP_FCGI_CHILDREN" => "4", "PHP_FCGI_MAX_REQUESTS" => "10000" ), "bin-copy-environment" => ( "PATH", "SHELL", "USER" ), "broken-scriptfilename" => "enable" )) ) ...allowing me to spawn new FastCGI server instances for each user.

  Read the article

• Very different results from df after a few seconds

  - by tatus2

  When the backup moves the files from one server to the other the results from df change every few seconds in an impossible manner. The source host is running rsync. On the destination host I'm running the following command every few seconds: echo `date` `df|grep md0` Results are below: Sat Jun 29 23:57:12 CEST 2013 /dev/md0 4326425568 579316100 3527339636 15% /MD0 Sat Jun 29 23:57:14 CEST 2013 /dev/md0 4326425568 852513700 3254142036 21% /MD0 Sat Jun 29 23:57:15 CEST 2013 /dev/md0 4326425568 969970340 3136685396 24% /MD0 Sat Jun 29 23:57:17 CEST 2013 /dev/md0 4326425568 1255222180 2851433556 31% /MD0 Sat Jun 29 23:57:20 CEST 2013 /dev/md0 4326425568 1276006720 2830649016 32% /MD0 Sat Jun 29 23:57:24 CEST 2013 /dev/md0 4326425568 1355440016 2751215720 34% /MD0 Sat Jun 29 23:57:26 CEST 2013 /dev/md0 4326425568 1425090960 2681564776 35% /MD0 Sat Jun 29 23:57:27 CEST 2013 /dev/md0 4326425568 1474601872 2632053864 36% /MD0 Sat Jun 29 23:57:28 CEST 2013 /dev/md0 4326425568 1493627384 2613028352 37% /MD0 Sat Jun 29 23:57:32 CEST 2013 /dev/md0 4326425568 615934400 3490721336 15% /MD0 Sat Jun 29 23:57:33 CEST 2013 /dev/md0 4326425568 636071360 3470584376 16% /MD0 As you can see I start from USE of 15% and after 15 seconds I'm at 37% (I don't need to mention that the backup can not copy this huge amount of data in such a short time). After ~20 seconds the cycle closes. I'm again roughly at the same usage as earlier. The value is reasonable, ca. 35 Mb were copied. Can somebody explain to me what is going on? Does df only make an estimation of usage instead of used value?

  Read the article

• iMac 20inch (Mid 2007) SL DVD Boot Prohibitory Sign

  - by Caitlann Lloyd

  iMac 20inch (Mid 2007 Build) with Ubuntu 12.0.4 How I got in this situation I had a perfectly healthy Intel iMac running Snow Leopard several months ago. Then I got the dreaded spinning gear and several kernel panics. After getting a little frustrated (failing to find a solution online), I found an old macbook installation disk and used it to access Disk Utility. From here, I erased my entire hard drive leaving me with no OS. I then created a Ubuntu DVD and installed Ubuntu onto the system. Now, on Ubuntu, I wine installed Transmac and burned a Single layer copy (with languages, etc. removed to save space) of Snow Leopard onto a 4.7GB DVD. I tried to boot from it and was met with first the grey apple screen and a spinning cog before the grey apple shortly turned into the infamous prohibitory sign. Note: I met this problem previously when using Disk Utility to create a bootable USB of Snow Leopard, hence I severely doubt it has anything to do with the DVD created. Resources at my disposal 1 x iMac running Ubuntu 6 x 4.7GB DVDs 1 x USB Stick 12GB 1 x Windows 7 Laptop Resources I do not have Firewire cables Access to a prebuilt retail disk (Misplaced) Access to another Mac Apple Warranty I would be hugely grateful if someone was able to tell me how to install Snow Leopard again.

  Read the article

• Slow Local Network, Windows 7, Snow Leopard, WiFi/Wired

  - by WerkkreW

  Hello - I am experiencing really poor local network performance in my home. I was recently using a Linksys WRT54G Router with DD-WRT on it, and a couple comparable Linksys-G PCI cards for connectivity but decided to upgrade hoping it would help with my performance issues. The computers in my house are connected as follows: Comcast Business Class Commercial 25mbps/10mbps (Verified with SpeakEasy and Speedtest.net) D-Link DGL-4500 Wireless N Router Windows 7x64 - D-Link DWA-552 Wireless-N Windows 7x64 - D-Link DWA-552 Wireless-N Mac Mini 10.6.2 - AirPort Extreme N Playstation 3, Hard Wired Xbox 360, Hard Wired Essentially the problem is very specific. Web browsing and uploading/downloading files from the internet is fine, more than fine. But if I want to say, Stream a video from one of my Windows 7 computers to my PS3, or copy a large video file between either of the PC's or the Mac, I get a consistent 500-900Kbps throughput at the high end. If I open my network browser, or try to browse my homegroup the response time is horrible. Both of my Windows computers are showing Strong wireless signals with a connection speed of 300Mbps. I know I can never expect to achieve anything near those speeds, but 500Kbps? Here is what I have tried so far: Enabled Single mode N-only and N/G Only on router WPA2 with AES Encrpytion Disabled "Remote Differential Compression" in Windows 7 Disabled TCP "Auto-Tuning" Used other software for file copies such as "Teracopy" I am at the end of my rope. Unfortunately I live in a 75 year old home with plaster walls, so hard-wiring my entire house isn't really an option I can handle right now. Any ideas to help me get decent speed when transferring files across my network would be greatly appreciated.

  Read the article

• Having trouble mapping Sharepoint document library as a Network Place

  - by Sdmfj

  I am using Office 365, Sharepoint Online 2013. Using Internet Explorer these are the steps I have taken: ticked the keep me signed in on the portal.microsoftonline.com page. It redirects me to Godaddy login page because Office 365 was purchased through them. I have added these sites to trusted sites (as well as every page in the process) and chose auto logon in Internet explorer. Once on the document library I open as explorer and copy the address as text. I go to My Computer and right click to add a network place and paste in the document library address. It successfully adds the library as a network place 30% of the time. I can do this same process 3 times in a row and it will fail the first 2 times and then succeeds. It works for a little while and then I get an error that the DNS cannot be found. I need multiple users in our organization to be able to access this document library as if it was a mapped network drive on our local network. Is there an easier way to do this? I may just sync using the One Drive app but thought that direct access to the files without worrying about users keeping their files synced.

  Read the article

• What options to use for Accurate bacula backup?

  - by Kiss Stefan

  It's actually 2 question in one. First is a bit more theoretically. So when specifying accurate options how does bacula figure out if a file needs to be backed up ? it's a simple AND ? As in if the options are Accurate = sm5 bacula will not backup the file if ((size = old size) AND (modtime = old modtime) AND (md5 = old md5)) Is that correct ? Do any of the options take precedence ? as in would be a file skipped if modif time is diffreent but it has the same md5sum ? Are there any implied options that you cannot ignore ? Practical case, ( bacula 5.0.1 ) I have to back-up a svn repo, in order to be able to make incremental backups as simple as posible i am hotcopying (client run before) it to another location, that bacula will backup ( then delete it with client run after). Now in the fileset i have Accurate = spnd5 This should tell bacula to take into consideration size , permission bits number of links , decreases in size and md5sum. However , an incremental is also including a full copy of the svn. What am i doing wrong ? it seems that it takes into account creation time even tho i have not specified it.

  Read the article

• Ruby on Rails cannot find Initializer?

  - by Ryan M.

  Hello, I am trying to deploy an app to a fresh Ubuntu 10 installation using Passenger 2.2.15, Rails 2.3.5, Ruby 1.8.7, and Apache 2.2.14. However, even with a default rails app (sudo rails defaultapp), I am receiving the following error: "no such file to load -- initializer". I'm not sure which files you might need copies of in order to diagnose this problem, so I'll copy a few here and hope that it will help. Thanks for any help you can provide. -RM /etc/apache2/sites-available/default <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www/appname/public <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> /etc/apache2/mods-available/passenger.conf <IfModule passenger_module> PassengerRoot /usr/lib/ruby/gems/1.8/gems/passenger-2.2.15 PassengerRuby /usr/bin/ruby1.8 </IfModule> /etc/apache2/mods-available/passenger.load LoadModule passenger_module /usr/lib/ruby/gems/1.8/gems/passenger-2.2.15/ext/apache2/mod_passenger.so

  Read the article

• Send keystrokes simultaneously to both host and slave over internet?

  - by donodarazao

  I would like to watch movies with a friend who lives far away from me. For this, the playback should be synchronized on both our pc. However, we have some constraints: Due to our low bandwidth internet, any form of streaming solution wouldn't work. We do however both have the same copy of the movie on our harddisks. We use movies to learn languages and because of this, we very frequently pause and rewind. The typical "3...2...1...go!" solution over skype wouldn't work because it would soon get out of sync. I imagine an approach that sends keystrokes simultaneously to both our pc would work (for example, if I press space to pause the movie at my pc, space should also be send to his pc). Any ideas how this could be realized? I looked into Synergy and InputDirector, but both neither seem to be an option, because I don't want to see the desktop of my friend, I want to see my desktop Keystrokes should be sent simultaneously to both pc, not just to one pc We have both Windows 7x64, and we might use any media player (VLC, XBMC,...).

  Read the article

• How to export SQL Server data from corrupted database (with disk write error)

  - by damitamit

  IT realised there was a disk write error on our production SQL Server 2005 and hence was causing the backups to fail. By the time they had realised this the nightly backup was old, so were not able to just restore the backup on another server. The database is still running and being used constantly. However DBCC CheckDB fails. Also the SQL Server backup task fails, Copy Database fails, Export Data Wizard fails. However it seems all the data can be read from the tables (i.e using bcp etc) Another observation I have made is that the Transaction Log is nearly double the size of the Database. (Does that mean all the changes arent being written to the MDF?) What would be the best plan of attack to get the database to a state where backups are working and the data is safe? Take the database offline and use the MDF/LDF to somehow create the database on another sql server? Export the data from the database using bcp. Create the database (use the Generate Scripts function on the corrupt db to create the schema on the new db) on another sql server and use bcp again to import the data. Some other option that is the right course of action in this situation? The IT manager says the data is safe as if the server fails, the data can be restored from the mdf/ldf. I'm not sure so insisted that we start exporting the data each night as a failsafe (using bcp for example). IT are also having issues on the hardware side of things as supposedly the disk error in on a virtualized disk and can't be rebuilt like a normal raid array (or something like that). Please excuse my use of incorrect terminology and incorrect assumptions on how Sql Server operates. I'm the application developer and have been called to help (as it seems IT know less about SQL Server than I do). Many Thanks, Amit

  Read the article

• will heavy network traffic affect other connections on HP ProCurve V1810-48G?

  - by nn4l

  I have a HP ProCurve V1810-48G switch with a few servers connected to it (everything in one rack). The switch is practically in its default configuration. During copying of a few hundred GByte of data from server_a to server_b (using tar cf - data | ssh server_b 'cd myhome; tar xf -'), essentially saturating the network capacity between those two servers, I noticed network related error messages on the console of server_c - as if server_c is no longer able to send/receive traffic to server_d. After canceling the copy command everything was normal again. I would understand this if the network connection would use a shared resource, for example if server_a and server_c are in one datacenter, server_b and server_d are in another datacenter and both datacenters are connected with a 100 MBit line. But all of the mentioned servers are connected to the same switch and are located in the same IP network. I always thought that a connection between two servers on one switch will not affect any other server connected to the switch. It is also possible that the network related error messages are caused by something else - but I can't risk a network problem for any other system on this switch. Please advise.

  Read the article

• Is TortoiseSVN really this buggy?

  - by John Isaacks

  I have been using tortoise svn for a couple weeks now. I get errors very often. Almost everything I do creates an error. this is with repositories on the internet, locally on my machine or a machine on the network. So I started to keep track. Some examples are below. 12/31/2010 Can't move 'C:\Users\jisaacks\Desktop\my branch test.svn\tmp\entries' to 'C:\Users\jisaacks\Desktop\my branch test.svn\entries': The file or directory is corrupted and unreadable. 01/04/2011 Commit failed (details follow): Server sent unexpected return value (405 Method Not Allowed) in response to MKCOL request for '/svn/kranichs-svn/!svn/wrk/b316f15e-0869-4644-9c53-87aa0103506b/branches' 01/06/2011 Can't move 'C:\Users\jisaacks\Desktop\DVD Catalog\vendors.svn\tmp\entries' to 'C:\Users\jisaacks\Desktop\DVD Catalog\vendors.svn\entries': The file or directory is corrupted and unreadable. 01/06/2011 Can't move 'C:\Users\jisaacks\Desktop\DVD Catalog\cake\tests\test_app\views\layouts.svn\tmp\entries' to 'C:\Users\jisaacks\Desktop\DVD Catalog\cake\tests\test_app\views\layouts.svn\entries': The file or directory is corrupted and unreadable. 01/06/2011 Commit failed (details follow): attempt to write a readonly database attempt to write a readonly database That last one about the read only database happens every time I commit. Say if I am working on the head revision (7) in a working copy. I make a change and commit it. It gives me this error. But if I look at the log it tells me that there is now a revision 8 (the commit I just made) but I am still on revision 7. So I need to run update to be on the current revision that I just commited. I hope I explained that clearly. Anyways with all these errors I wonder.. Is TSVN just this unstable, does everyone have these issues. Or is it just me? If just me, what could I be doing wrong?

  Read the article

< Previous Page | 481 482 483 484 485 486 487 488 489 490 491 492  | Next Page >