Search Results

Search found 14439 results on 578 pages for 'folder customization'.

Page 487/578 | < Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >

• 5 Step Procedure for Android Deployment with NetBeans IDE

  - by Geertjan

  I'm finding that it's so simple to deploy apps to Android that I'm not needing to use the Android emulator at all, haven't been able to figure out how it works anyway (big blinky screen pops up that I don't know what to do with). I just simply deploy the app straight to Android, try it out there, and then uninstall it, if needed. The whole process (only step 4 and 5 below need to be done for each deployment iteration, after you've done steps 1, 2, and 3 once to set up the deployment environment), takes a few seconds. Here's what I do: On Android, go to Settings | Applications. Check "Unknown sources". In "Development", check "USB debugging". Connect Android to your computer via a USB cable. Start up NetBeans IDE, with NBAndroid installed, as described yesterday. and create your "Hello World" app. Right-click the project in the IDE and choose "Export Signed Android Package". Create a new keystore, or choose an existing one, via the wizard that appears. At the end of the wizard (would be nice if NBAndroid would let you set up a keystore once and then reuse it for all your projects, without needing to work through the whole wizard step by step each time), you'll have a new release APK file (Android deployment archive) in the project's 'bin' folder, which you can see in the Files window. Go to the command line (would be nice if NBAndroid were to support adb, would mean I wouldn't need the command line at all), browse to the location of the APK file above. Type "adb install helloworld-release.apk" or whatever the APK file is called. You should see a "Success" message in the command line. Now the application is installed. On your Android, go to "Applications", and there you'll see your brand new app. Then try it out there and delete it if you're not happy with it. After you've made a change in your app, simply repeat step 4 and 5, i.e., create a new APK and install it via adb. Step 4 and 5 take a couple of seconds. And, given that it's all so simple, I don't see the value of the Android emulator, at all.

  Read the article

• Interaction of a GUI-based App and Windows Service

  - by psubsee2003

  I am working on personal project that will be designed to help manage my media library, specifically recordings created by Windows Media Center. So I am going to have the following parts to this application: A Windows Service that monitors the recording folder. Once a new recording is completed that meets specific criteria, it will call several 3rd party CLI Applications to remove the commercials and re-encode the video into a more hard-drive friendly format. A controller GUI to be able to modify settings of the service, specifically add new shows to watch for, and to modify parameters for the CLI Applications A standalone (GUI-based) desktop application that can perform many of the same functions as the windows service, expect manually on specific files instead of automatically based on specific criteria. (It should be mentioned that I have limited experience with an application of this complexity, and I have absolutely zero experience with Windows Services) Since the 1st and 3rd bullet share similar functionality, my design plan is to pull the common functionality into a separate library shared by both parts applications, but these 2 components do not need to interact otherwise. The 2nd and 3rd bullets seem to share some common functionality, both will have a GUI, both will have to help define similar parameters (one to send to the service and the other to send directly to the CLI applications), so I can see some advantage to combining them into the same application. On the other hand, the standalone application (bullet #3) really does not need to interact with the service at all, except for possibly sharing a few common default parameters that can easily be put into an XML in a common location, so it seems to make more sense to just keep everything separate. The controller GUI (2nd bullet) is where I am stuck at the moment. Do I just roll this functionality (allow for user interaction with the service to update settings and criteria) into the standalone application? Or would it be a better design decision to keep them separate? Specifically, I'm worried about adding the complexity of communicating with the Windows Service to the standalone application when it doesn't need it. Is WCF the right approach to allow the controller GUI to interact with the Windows Service? Or is there a better alternative? At the moment, I don't envision a need for a significant amount of interaction, maybe just adding a new task once in a while and occasionally tweaking a parameter, but when something is changed, I do expect the windows service to immediately use the new settings.

  Read the article

• What You Said: Staying Productive While Working from home

  - by Jason Fitzpatrick

  Earlier this week we asked you to share your telecommuting/work-from-home productivity tips. Now we’re back with a tips and tricks roundup; read on to see how your fellow readers stay focused at home. By far and away the most common technique deployed as carefully isolating work from home life. Carol writes: I love working from home and have done so for 6 years now. I have a routine just as if I was going to an office, except my commute is 12 steps. I get ready for work, grab my purse and smart phone and go to up the steps to my office. I maintain a separate phone line and voice mail for work that I cannot answer from anywhere but my work desk. I use call forwarding when I travel so only my office phone number is published. I have VOIP phone service so I can forward calls from the internet if I forget, or need to change where the phone is forwarded. I do have a wired and wireless head set so I can go get a cold drink if on one of those long boring conference calls. I plan my ‘get off from work’ time and try to stick to it, as with any job some days I am late getting off, but it all works out. I make sure my office is for work only, any other computer play time is in a different part of the house on different computer. My office has laptop, dock, couple of monitors, multipurpose printer, fax, scanner, file cabinets – just like the office at a company. I just also happen to have a couple of golden retrievers that come to work with me and usually lay quietly until 5, and yes they know it is 5pm sometimes before I do. For me, one of the biggest concerns when working from home is not being unproductive, but the danger of never stopping work. You could keep going and going because let’s face it – the company will let you do it, so I set myself up to prevent that and maintain a separateness. HTG Explains: Does Your Android Phone Need an Antivirus? How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder?

  Read the article

• How to generate SPMetal for a specific list (OOTB: like tasks or contacts) with custom columns

  - by KunaalKapoor

  SPMetal is used to make use of LINQ on a list in SharePoint 2010. By default when you generate SPMetal on a site you will get a code generated file for most of the lists and probably more. Here is a MSDN link for some info on SPMetal.http://msdn.microsoft.com/en-us/library/ee538255(office.14).aspxBut what if you want only to generate the code for one list?Well it is quite simple once you figure it out. You need to add an xml file to override the default settings of SPMetal and specify it in the /parameters option. I will show you how to do this.First create a Folder that will contain two files (GenerateSPMetalCode.bat and SPMetal.xml).Below is the content of the files:GenerateSPMetalCode.bat "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN\SPMetal" /web:http://YourServer /code:OutPutFileName.cs /language:csharp /parameters:SPMetal.xml pause SPMetal.xml <?xml version="1.0" encoding="utf-8"?> <Web AccessModifier="Internal" xmlns="http://schemas.microsoft.com/SharePoint/2009/spmetal"> <List Name="ListName"> <ContentType Name="ContentTypeName" Class="GeneratedClassName" /> </List> <ExcludeOtherLists></ExcludeOtherLists> </Web> You will have to change some of the text in the files so that it will be specific to your SharePoint Server Setup. In the bat file you will have to change http://YourServer to the url of the web where your list is. In the SPMetal.xml file you need to change ListName to the name of your list and the ContentTypeName to the name of the content type you want to extract. The GeneratedClassName can be anything but perhaps you should rename it to something more sensible.Adding the following line: '<List Name="ListName"><ContentType Name="ContentTypeName" Class="GeneratedClassName" /> </List>'  makes sure that any custom columns added to an OOTB list like contacts or tasks are also generated, which are missed out in a regular generation.So now when you run it the SPMetal command will read the SPMetal.xml list and override its commands. ExcludeOtherLists element makes it so that only the code for the lists you specify will be generated. For some reason I got an error if I had this element above the List element.You sould now have a code file called OutPutFileName.cs that has been generated. You can now put this in your SharePoint project for use with your LINQ queries against that list.I will soon write a LINQ example that uses the generated class. UPDATE: Add the /namespace parameter to add a namespace to the generated code. "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN\SPMetal" /web:http://YourServer /namespace:MySPMetalNameSpace /code:OutPutFileName.cs /language:csharp /parameters:SPMetal.xml

  Read the article

• Capture a Query Executed By An Application Or User Against a SQL Server Database in Less Than a Minute

  - by Compudicted

  At times a Database Administrator, or even a developer is required to wear a spy’s hat. This necessity oftentimes is dictated by a need to take a glimpse into a black-box application for reasons varying from a performance issue to an unauthorized access to data or resources, or as in my most recent case, a closed source custom application that was abandoned by a deserted contractor without source code. It may not be news or unknown to most IT people that SQL Server has always provided means of back-door access to everything connecting to its database. This indispensible tool is SQL Server Profiler. This “gem” is always quietly sitting in the Start – Programs – SQL Server <product version> – Performance Tools folder (yes, it is for performance analysis mostly, but not limited to) ready to help you! So, to the action, let’s start it up. Once ready click on the File – New Trace button, or using Ctrl-N with your keyboard. The standard connection dialog you have seen in SSMS comes up where you connect the standard way: One side note here, you will be able to connect only if your account belongs to the sysadmin or alter trace fixed server role. Upon a successful connection you must be able to see this initial dialog: At this stage I will give a hint: you will have a wide variety of predefined templates: But to shorten your time to results you would need to opt for using the TSQL_Grouped template. Now you need to set it up. In some cases, you will know the principal’s login name (account) that needs to be monitored in advance, and in some (like in mine), you will not. But it is VERY helpful to monitor just a particular account to minimize the amount of results returned. So if you know it you can already go to the Event Section tab, then click the Column Filters button which would bring a dialog below where you key in the account being monitored without any mask (or whildcard):  If you do not know the principal name then you will need to poke around and look around for things like a config file where (typically!) the connection string is fully exposed. That was the case in my situation, an application had an app.config (XML) file with the connection string in it not encrypted: This made my endeavor very easy. So after I entered the account to monitor I clicked on Run button and also started my black-box application. Voilà, in a under a minute of time I had the SQL statement captured:

  Read the article

• Screen brightness dull after upgrade to Ubuntu 14.04

  - by user288426

  After upgrading to Ubuntu 14.04 I found that I could not increase screen brightness. I'm using a Samsung NC110 netbook. Initially the function key to modify brightness did not respond at all. After implementation of the first part of the fix, the key came alive and the brightness bar could be modified. Yet at maximum brightness indicated the screen still remained very dull. The 2nd part of the fix cures that problem, at least for this type of machine. First part of the fix was copied and modified in line with my experience from following post: How to control Brightness Open a terminal (Ctrl + Alt + T). Then type sudo nano /etc/default/grub. It will ask for your password. Type it in. Around the 11th line, there will be something like: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash". Change it to: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=Linux acpi_backlight=vendor" Save the file by Ctrl+O followed by Ctrl+X. Then run sudo update-grub in the terminal. Reboot and see if backlight adjustment works. Then I needed to modify the rc.local file. Therefore read below fix to understand the procedure: problem with adjusting brightness Ubuntu 14.04 In my case I had 2 folders listed under /sys/class/backlight which were: intel_backlight samsung I realized that the samsung folder is governing. I had to modify the check for max brightness to: cat /sys/class/backlight/samsung/max_brightness In my case the max value obtained is 8. Besides putting this into rc.local, I also had to uncomment the first line to get this working. My rc.local under /etc/ now looks as follows: !/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. echo 8 > /sys/class/backlight/samsung/brightness exit 0 Now I can modify brightness on my netbook and also can get the screen up to its maximum brightness. Hope this is helpful.

  Read the article

• Things to do After installing Visual Studio Express 12.

  - by Anirudha

  Originally posted on: http://geekswithblogs.net/anirugu/archive/2013/06/25/things-to-do-after-install-visual-studio-express-12.aspx  1. Environment > Document > Check the option for auto-load changes. By checking this option You can modified the file outside the VWD and VWD don’t tell you for confirmation. 2. Environment > Tabs and Windows > Preview Tab > uncheck the solution Explorer option. This option don’t show you the file when you just click on them in solution explorer. 3. Project and solutions > Check the track active item in solution explorer This option help you to easily figure out which file you working on and where it is in solution explorer . 4. text editor > all settings > word wrap > check this feature to enable word wrap 5. Text-editor > Css > formatting > check the compact rule. this option make you file smaller in size and easily to read. 6. Text-editor > html > miscellaneous > uncheck the auto ID option. Actually When you copy paste the html code Visual studio change their ID if ID is already exist. this option disable that feature. This is useful to do when we write if{} else {} statement and this is not helpful on that case. 7. Package manager > General > browse > copy the location of cache folder and in package source add them as source. This way you can use package that you have use earlier when you are offline. Thanks for read my post

  Read the article

• Deploying, but without those pesky test files!

  - by Chris Skardon

  Silverlight testing is great, we all know that (don’t we??), we’re expected to do it as part of the development process, but once we’ve got an awesome application written and we come to deploy it, we don’t want the test files going out with it… You might be like me, have the files in a Web project – let’s face it, that’s how we’re pushed into doing it… So let’s stick with it! Now. I’m deploying via the wonders of the Web Deployment shizzle, but this also applies to the classic ‘installer’ project as well.. Baaaasically, we’re going to use the ‘Debug’ / ‘Release’ configurations to include given files. ?? OK, you know in the top of your visual studio editor, you (usually) have a drop down which predominantly reads ‘Debug’? Those are ‘configurations’. Mostly we don’t bother changing it, primarily due to laziness, but also the fact that we generally don’t see ‘Release’ as actually doing anything other than making it harder to find problems :) Well today my friends we’re going to change that bad boy… The next few steps are just helping you set up a new ‘Debug’ configuration, but you can just switch to the ‘Release’ configuration and skip to the end… First let’s go to the Configuration Manager. There are multiple ways, through the ‘Build’ menu (at the bottom), or via the drop down which currently has ‘Debug’ in it :) Got it? Select ‘New’ from the ‘Active solution configuration’ drop down: Create a new configuration, kind of like the picture below shows (or for those graphically challenged – Name: DebugWithNoTests, and Copy settings from: ‘Debug’, ensuring the ‘Create new project configurations’ checkbox is checked). Press OK. VS will do some shizzle, and in the Configuration manager, you will see pretty much exactly what you did before, only with ‘Debug’ replaced with ‘DebugWithNoTests’. Turn off the build options for the test projects. We won’t need them.. IF you skipped down from the top, this is where you’ll be wanting to stop!!! Close and now we’re one notepad step away from achieving our goals. Yes, I said notepad. You can’t do what we’re going to do in VS. (Pity). Go to the folder where your web project is, and right click on the ‘.csproj’ file. Now open it with notepad. Head on down to the ‘<Content Include’ bits, they’ll look like this: <ItemGroup> <Content Include="ClientBin\Tests.xap" /> ... </ItemGroup> Take this and modify each of the files you don’t want deployed and change to: <Content Include="ClientBin\Tests.xap" Condition="'$(Configuration)' == 'Debug'" /> Once you’ve got that sorted publish your project, once with the Debug configuration selected, and another with any other configuration (‘Release’, ‘DebugWithNoTests’ etc).. No files! Huzzah!

  Read the article

• Correct permissions for /var/www and wordpress

  - by dpbklyn

  Hello and thank you in advance! I am relatively new to ubuntu, so please excuse the newbie-ness of this question... I have set up a LAMP server (ubuntu server 11.10) and I have access via SSH and to the "it works" page from a web browser from inside my network (via ip address) and from outside using dyndns. I have a couple of projects in development with some outside developers and I want to use this server as a development server for testing and for client approvals. We have some Wordpress projects that sit in subdirectories in /var/www/wordpress1 /var/www/wordpress2, etc. I cannot access these sub directories from a browser in order to set up WP--or (I assume) to see the content on a browser. I get a 403 Forbidden error on my browser. I assume that this is a permissions problem. Can you please tell me the proper settings for the permissions to: 1) Allow the developers and me to read/write. 2) to allow WP set up and do its thing 3) Allow visitors to access the site(s) via the web. I should also mention that the subfolder are actually simlinks to folder on another internal hdd--I don't think this will make a difference, but I thought I should disclose. Since I am a newbie to ubuntu, step-by-step directions are greatly appreciated! Thank you for taking the time! dp total 12 drwxr-xr-x 2 root root 4096 2012-07-12 10:55 . drwxr-xr-x 13 root root 4096 2012-07-11 20:02 .. lrwxrwxrwx 1 root root 43 2012-07-11 20:45 admin_media -> /root/django_src/django/contrib/admin/media -rw-r--r-- 1 root root 177 2012-07-11 17:50 index.html lrwxrwxrwx 1 root root 14 2012-07-11 20:42 media -> /hdd/web/media lrwxrwxrwx 1 root root 18 2012-07-12 10:55 wordpress -> /hdd/web/wordpress Here is the result of using chown -R www-data:www-data /var/www total 12 drwxr-xr-x 2 www-data www-data 4096 2012-07-12 10:55 . drwxr-xr-x 13 root root 4096 2012-07-11 20:02 .. lrwxrwxrwx 1 www-data www-data 43 2012-07-11 20:45 admin_media -> /root/django_src/django/contrib/admin/media -rw-r--r-- 1 www-data www-data 177 2012-07-11 17:50 index.html lrwxrwxrwx 1 www-data www-data 14 2012-07-11 20:42 media -> /hdd/web/media lrwxrwxrwx 1 www-data www-data 18 2012-07-12 10:55 wordpress -> /hdd/web/wordpress I am still unable to access via browser...

  Read the article

• Accessing controls of .aspx file in .aspx.cs without any declaration.!!??

  I am able to access the controls of ".aspx" file in ".aspx.cs" directly without any declaration in ".aspx.cs" or in designer.cs. How is this possible? This is happeing only if I open website as using File System. Create a new ASP.NET web site application with Visual Studio 2008. So following three files will be created automatically              "Default.aspx",              "Default.aspx.cs"              "Default.designer.cs" Now Delete "Default.designer.cs" perminently. Just create a button in Default.aspx file    <asp:Button runat="server" Text="Save Plan" ID="btnSave" />   Close the Solution and open the website as File System.               File -> Open Web Site -> File System -> Select Web Site Folder and Open the project.                   Now btnSave is automatically recognized in Default.aspx.cs without any declaration in Default.aspx.cs as bellow                            System.Web.UI.WebControls.Button btnSave; How btnSave is being recognized by .cs file without defining it anywhere as an object of System.Web.UI.WebControls.Button? Note: This happens only if you open Web Site from File System.           and No Declaration at all for btnSave. Please refer this article on this. span.fullpost {display:none;}

  Read the article

• Making CopySourceAsHtml add-on work with VS2010

  - by DigiMortal

  As there are still bloggers who use CopySourceAsHtml add-on for Visual Studio to get syntax highlighted code to their blog posts and there is no guidance in CSAH site how to make it work with Visual Studio 2010 I will give my guidance here. Almost all code in this blog is syntax highlighted by this add-on (read more from my post Visual Studio add-in: CopySourceAsHTML). Last version of CSAH is available for VS2008 but it is easy to make it work with VS2010. Just follow these steps. Close VS2010 if it is opened. Goto folder MyDocuments\Visual Studio 2010. Move to AddIns subfolder (create it if there is no such subfolder). Create file called CopySourceAsHtml.AddIn and open it in text editor. Paste the following XML to editor:   <?xml version="1.0" encoding="utf-8" standalone="no"?> <Extensibility xmlns="http://schemas.microsoft.com/AutomationExtensibility"> <HostApplication> <Name>Microsoft Visual Studio Macros</Name> <Version>10.0</Version> </HostApplication> <HostApplication> <Name>Microsoft Visual Studio</Name> <Version>10.0</Version> </HostApplication> <Addin> <FriendlyName>CopySourceAsHtml</FriendlyName> <Description>Adds support to Microsoft Visual Studio 2010 for copying source code, syntax highlighting, and line numbers as HTML.</Description> <Assembly>JTLeigh.Tools.Development.CopySourceAsHtml, Version=3.0.3215.1, Culture=neutral, PublicKeyToken=bb2a58bdc03d2e14, processorArchitecture=MSIL</Assembly> <FullClassName>JTLeigh.Tools.Development.CopySourceAsHtml.Connect</FullClassName> <LoadBehavior>1</LoadBehavior> <CommandPreload>0</CommandPreload> <CommandLineSafe>0</CommandLineSafe> </Addin> </Extensibility> Save file and close it. Run VS2010 and activate add-on if it is not activated yet. That’s it. If you are heavy user of CSAH then I recommend you to bookmark this post. :)

  Read the article

• How to Export a Contact to and Import a Contact from a vCard (.vcf) File in Outlook 2013

  - by Lori Kaufman

  vCard is the abbreviation for Virtual Business Card and is the standard format (.vcf files) for electronic business cards. vCards allow you to create and share contact information over the internet, such as in email messages and instant messaging. You can also use vCards to move contact information from one email or personal information management program to another, as long as both programs support the .vcf file format. vCards can contain name and address information, as well as phone numbers, email addresses, URLs, images, and audio clips. We will show you how to export a contact to and import a contact from a vCard, or .vcf file, in Outlook. First access the People section by clicking People at the bottom of the Outlook window. To view your contact in business card format, click Business Card in the Current View section of the Home tab. Select a contact by clicking on the name bar at the top of the business card. To export the selected contact as a vCard, click the File tab. On the Account Information screen, click Save As in the list of options on the left. The Save As dialog box displays. By default, the name of the contact is used to name the .vcf file in the File name edit box. Change the name, if desired, select a location for the file, and click Save. The contact is saved as a .vcf file. To import a vCard, or .vcf file, into Outlook, simply double-click on the .vcf file. By default, .vcf files are automatically associated with Outlook, so the file is opened in Outlook as a Contact. Make any changes or additions to the contact in the contact editing window. To save the contact, click Save & Close in the Actions section of the Contact tab. NOTE: Notice that because this contact is new, the full contact editing window displays rather than the Contact Card that displays when double-clicking on a contact. You can open the full contact editing window instead of the Contact Card when editing a contact or searching for a contact. The contact is added to the Contacts folder. You can add your contact information to a signature in business card format, and it will display as shown above in emails. We have covered how to create signatures and will be discussing more about signatures and business cards in Outlook.     

  Read the article

• WiFi on Ubuntu 12.04 custom: downloading unbearably slow

  - by Mark

  iwconfig reports 11 Mbps, yet I've seen as low as <1 KBps. This is the latest in my laundry list of Ubuntu problems in a dual-boot machine (cyberpowerpc custom, intel i7-3820, nvidia gtx 570). I received it two days ago, Windows 7 running fine, still having problems with Ubuntu. The browsing is intermittent but unacceptable. e.g. I could get to this site last night but I couldn't post this question. The downloading is unbearably slow, I can't download anything or install any packages because the speed is so slow. e.g. I am trying to install vim which is inexplicably missing from my 12.04 install (add another one to the problems list) and my download speed reported in the terminal was 241 B/s. Yes, bytes. iwconfig reports 11 Mbps, which further adds to the confusion. User@ubuntu:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"linksys" Mode:Managed Frequency:2.437 GHz Access Point: 00:18:39:76:2C:A1 Bit Rate=11 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=36/70 Signal level=-74 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:54 Invalid misc:18 Missed beacon:0 eth0 no wireless extensions. Any ideas? I see this is a problem a lot of people, but none of the on line solutions have worked for me so far. e.g. one site recommends editing the ath9k.conf file in /etc/modprobe.d, yet this file isn't even in the folder: User@ubuntu:/$ cd etc/modprobe.d User@ubuntu:/etc/modprobe.d$ ls alsa-base.conf blacklist-oss.conf blacklist-ath_pci.conf blacklist-rare-network.conf blacklist.conf blacklist-watchdog.conf blacklist-firewire.conf dkms.conf blacklist-framebuffer.conf nvidia-current_hybrid.conf blacklist-modem.conf nvidia-graphics-drivers.conf I think the nvidia gpu might be mucking things up. I had the "blinking cursor" problem when installing in the first place, and then I had the monitor out of range problem as well. I have my faithful Asus laptop, which is running Ubuntu 12.04 just fine. The only difference is executing host -t SOA local in the terminal gives User@ubuntu:~$ host -t SOA local local has SOA record local. nobody.localhost. 42 86400 43200 604800 10800 in my new machine, and the command reports Host local. not found in the laptop. Help would be most welcome, as I am in danger of reverting back to Windows. I'm seriously considering it. Sorry for the length, trying to show my effort in resolving the issue and include terminal snippets that might be helpful.

  Read the article

• How to configure a longer version Number in artifactory

  - by claudine

  The version-numbers for our jars have to be longer them x.x.x. We would rather need x.x.x.x to integrate some old-fashioned self-made mechanism. This is, because we tag our software with x.x.x and as soon as we have a delivery to a customer one specific jar has to be build exactly at this point of time to fit to another backend, which communicates with our program. For that reason this one jar has the version 2.3.4.1, when generated and in next delivery of the same Version it is build and named 2.3.4.2. Now artifactory cannot handle this an doesn't save more than x.x.x.2 in some cases. So we thought of maybe edit the regular expression in the maven repository layout (see attached Screenshot) Because testing the path in the field below shows, that it cannot handle the version number. Of course for the rest of our jars still x.x.x has to work.. For Example here is the maven-metadata.xml <?xml version="1.0" encoding="UTF-8"?> <metadata> <groupId>com.firm</groupId> <artifactId>someid</artifactId> <version>1.5.1</version> <versioning> <latest>1.5.1</latest> <release>1.5.1</release> <versions> <version>1.4.62</version> </versions> <lastUpdated>20120926073942</lastUpdated> </versioning> </metadata> The folder structure looks like: someid 1.4.62 1.4.62.1 1.4.62.2 1.4.62.3 If we deploy an new artifact version (1.4.62.1), the maven-metadata.xml contains the 1.4.62.1 version. But the artifactory overrides the version number (1.4.62.x) to (1.4.62) after an unspecified time. It seems that the artifactory only support major, minor and revision numbers, and deletes the buildnumber. Now we looking for a solution do disable this behavior. We use the JFrog Artifactory version 2.5.0 (rev. 13086). Any ideas, maybe? Thanks in andvance

  Read the article

• Is it unusual for a small company (15 developers) not to use managed source/version control?

  - by LordScree

  It's not really a technical question, but there are several other questions here about source control and best practice. The company I work for (which will remain anonymous) uses a network share to host its source code and released code. It's the responsibility of the developer or manager to manually move source code to the correct folder depending on whether it's been released and what version it is and stuff. We have various spreadsheets dotted around where we record file names and versions and what's changed, and some teams also put details of different versions at the top of each file. Each team (2-3 teams) seems to do this differently within the company. As you can imagine, it's an organised mess - organised, because the "right people" know where their stuff is, but a mess because it's all different and it relies on people remembering what to do at any one time. One good thing is that everything is backed up on a nightly basis and kept indefinitely, so if mistakes are made, snapshots can be recovered. I've been trying to push for some kind of managed source control for a while, but I can't seem to get enough support for it within the company. My main arguments are: We're currently vulnerable; at any point someone could forget to do one of the many release actions we have to do, which could mean whole versions are not stored correctly. It could take hours or even days to piece a version back together if necessary We're developing new features along with bug fixes, and often have to delay the release of one or the other because some work has not been completed yet. We also have to force customers to take versions that include new features even if they just want a bug fix, because there's only really one version we're all working on We're experiencing problems with Visual Studio because multiple developers are using the same projects at the same time (not the same files, but it's still causing problems) There are only 15 developers, but we all do stuff differently; wouldn't it be better to have a standard company-wide approach we all have to follow? My questions are: Is it normal for a group of this size not to have source control? I have so far been given only vague reasons for not having source control - what reasons would you suggest could be valid for not implementing source control, given the information above? Are there any more reasons for source control that I could add to my arsenal? I'm asking mainly to get a feel for why I have had so much resistance, so please answer honestly. I'll give the answer to the person I believe has taken the most balanced approach and has answered all three questions. Thanks in advance

  Read the article

• 12.04 Booting into Terminal

  - by user170796

  To preface this, I would like to say that I am completely new to Ubuntu and have essentially zero programming experience/experience working with command line and terminal. I installed Ubuntu because I would like to get into programming. If you could provide me with the simplest instructions possible, I would be grateful. I have a Lenovo Ideapad Y500 (Intel i7, NVidia GT 750m, 1TB HDD, 16GB SSD cache, 8GB RAM) with Windows 8 on it. Using a Live CD, I installed Ubuntu 12.04 onto a 75 GB partition. During the installation, I kept all default settings except for one thing; I decided to encrypt my home folder, and so checked the corresponding box. The installation completed, and I restarted. Once I restarted, I saw the options "Ubuntu, with Linux 3.2.0-23-generic" "Ubuntu, with Linux 3.2.0-23-generic (recovery mode)" "Memory test (memtest86+)" "Memory test (memtest86+, serial console 115200)" "Windows Recovery Environment (loader) (on /dev/sdb3)" "Windows 8 (loader) (on /dev/sdb5)" "System Setup" I chose the first option, and was directed to a screen with the Ubuntu logo and the row of five dots below that change from orange to white. Then, I was brought to a full screen terminal that prompted me to login, which I did. I saw no option to boot into GUI at all, and am lost. I've been searching around and have tried the "startx" command to no avail. Should the command have some sort of context or something? I've also tried selecting the recovery mode option from the boot manager. I've tried the resume option from the following menu, which eventually just shuts down the computer after displaying a lot of scrolling text that's too fast for me to read. I've also tried the failsafex mode from the recovery mode menu, which only brings up a terminal box at the bottom of the window that covers the entire bottom part of the screen. Commands won't work in this window. When I try to access Windows 8, I get a message saying that the EFI file path was not specified or something along those lines. I had to enable Secure Boot in order to access Windows 8 (I had disabled it to be able to boot from the Live CD), which is functioning normally. I am at a complete loss for what to do. Any help will be extremely appreciated. EDIT: Bonus question! If you could figure out a way for me to boot to Windows 8 without having to enable Secure Boot, it would save me a lot of trouble. I can deal with switching every time, but I'd rather not have to.

  Read the article

• Accessing controls of .aspx file in .aspx.cs without any declaration.!!??

  I am able to access the controls of ".aspx" file in ".aspx.cs" directly without any declaration in ".aspx.cs" or in designer.cs. How is this possible? This is happeing only if I open website as using File System. Create a new ASP.NET web site application with Visual Studio 2008. So following three files will be created automatically              "Default.aspx",              "Default.aspx.cs"              "Default.designer.cs" Now Delete "Default.designer.cs" perminently. Just create a button in Default.aspx file    <asp:Button runat="server" Text="Save Plan" ID="btnSave" />   Close the Solution and open the website as File System.               File -> Open Web Site -> File System -> Select Web Site Folder and Open the project.                   Now btnSave is automatically recognized in Default.aspx.cs without any declaration in Default.aspx.cs as bellow                            System.Web.UI.WebControls.Button btnSave; How btnSave is being recognized by .cs file without defining it anywhere as an object of System.Web.UI.WebControls.Button? Note: This happens only if you open Web Site from File System.           and No Declaration at all for btnSave. Please refer this article on this. span.fullpost {display:none;}

  Read the article

• Windows Backup failed with error 0x807800C5

  - by Alexey Ivanov

  I setup backup of my Windows 8 laptop with Windows 7 File Recovery (known as Backup and Restore in Windows 7). Backup of files runs successfully. But if I try to create system image, it fails with error 0x807800C5: Error details on the dialog: The mounted backup volume is inaccessible. Error details in the system log: There was a failure in preparing the backup image of one of the volumes in the backup set. I save the backup to a network location, WD MyBookLive.   Edit: I tried some of the steps suggested in the various thread about this issue: Cleaned up the backup location: Removed MediaID.bin in the backup location. Removed folder <ComputerName> from WindowsImageBackup. Restarted backup resulted in the same error. However, the error dialog shows slightly different error message: The specified backup disk cannot be found. Performed System File Check by running sfc /scannow. It showed no errors. Running backup failed nevertheless. I tried searching Google for error code but I've found no solution so far. Update: I submitted technical support request to Microsoft. The first suggestion was to clean boot, but it didn't help. I pointed out that I had tried all the methods from the same problem on MS Answers, and nothing had helped.

  Read the article

• MobaXTerm - SSH Key authentication

  - by Chip Sprague

  I have a key that I converted and works fine with Putty. I have tried these formats: ssh -p 1111 -i id_rsa [email protected] ssh -i id_rsa -p 1111 [email protected] The key is in the same folder as the MobaXTerm executable. Thanks! EDIT: [chip.client] $ ssh -p 1111 -i id_rsa [email protected] -v Warning: Identity file id_rsa not accessible: No such file or directory. OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to 192.168.0.9 [192.168.0.100] port 1111. debug1: Connection established. debug1: identity file /home/chip/.ssh/id_rsa type -1 debug1: identity file /home/chip/.ssh/id_rsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3p1 Debian-3ubuntu7 debug1: match: OpenSSH_5.3p1 Debian-3ubuntu7 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 [email protected] debug1: kex: client->server aes128-ctr hmac-md5 [email protected] debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: checking without port identifier Warning: Permanently added '[192.168.0.100]:1111' (RSA) to the list of known hosts. debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/chip/.ssh/id_rsa debug1: No more authentication methods to try. Permission denied (publickey). [01/09/2011 - 09:15.38] ~

  Read the article

• Windows 2012/IIS 8 + ASP.NET MVC Applicaiton 403.14 (Forbidden) - The Web server is configured to not list the contents

  - by WiredPrairie

  I have a very simple MVC 4 application I'm trying to deploy to a Windows 2012 server. Inconsistently, when navigating to the root of the web application (http://localhost/app), it returns a 403.14-Forbidden: Detailed Error Information: Module: DirectoryListingModule Notification: ExecuteRequestHandler Handler: StaticFile Error Code: 0x00000000 Requested URL: http://localhost:80/test1/ Physical Path: c:\apps\test1\ Logon Method: Negotiate The web application is: Is a very vanilla VS2012 MVC4 Intranet template -- with only a tweak to a label to prove things were working. runs in an Integrated v4.0 application pool setup to use Windows authentication application pool has a custom AD Identity assigned (so it can gain access to a SQL server) application pool identity has read permissions in the c:\apps\test1 folder in which it is running It's an MVC4 application, targeting .NET 4.0 currently -There's no default document in an MVC4 application (like a default.aspx), as there shouldn't need to be one. I don't want to enable directory listings (as that's not the real error). Installed: Roles / Web Server (IIS) / Appliation Development / (.NET 4.5 Extensibility, Application Initialization, ASP.NET 4.5, ISAP Extensions, ISAPI Filters, WebSocket Protocol) Works locally on my machine in IISExpress on Windows 8 Has configured in web.config: <modules runAllManagedModulesForAllRequests="true" /> is set to precompiled during publish When I change the precompiled option to false, the web application does not fail (in my testing at least, it seems to work consistently). The reason I say it's inconsistent is that I've seen it work, then I've published, and the error returns. I can't find a pattern to the issue (and right now, I haven't been able to get it work again, at all). The 403 is returned from a local or remote web browser. I've had trouble finding a solution that isn't intended for older versions of Windows (like suggestions to reinstall ASP.NET which won't work on Windows 2012). I really don't know what else to try.

  Read the article

• Why is firefox 4 not HW accelerated?

  - by acidzombie24

  At first i thought it was my computer but then i tried chrome. Why isnt firefox not hardware accelerated? The first screenshot shows chrome at 23% usage. The 2nd shows 59%. I have 2 cpus which is why it isnt 100% usage. The game pictured is biolab Heres the text for about:support Application Basics Name Firefox Version 4.0 User Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:2.0) Gecko/20100101 Firefox/4.0 Profile Directory Open Containing Folder Enabled Plugins about:plugins Build Configuration about:buildconfig Extensions Name Version Enabled ID Modified Preferences Name Value accessibility.typeaheadfind.flashBar 0 browser.places.importBookmarksHTML false browser.places.smartBookmarksVersion 2 browser.startup.homepage_override.buildID 20110303194838 browser.startup.homepage_override.mstone rv:2.0 extensions.lastAppVersion 4.0 gfx.font_rendering.directwrite.enabled true network.cookie.prefsMigrated true places.history.expiration.transient_current_max_pages 127602 privacy.sanitize.migrateFx3Prefs true Graphics Adapter Description Mobile Intel(R) 4 Series Express Chipset Family Vendor ID 8086 Device ID 2a42 Adapter RAM Unknown Adapter Drivers igdumd64 igd10umd64 igdumdx32 igd10umd32 Driver Version 8.15.10.2202 Driver Date 8-25-2010 Direct2D Enabled true DirectWrite Enabled true (6.1.7600.16385, font cache n/a) WebGL Renderer Google Inc. -- ANGLE -- OpenGL ES 2.0 (ANGLE 0.0.0.541) GPU Accelerated Windows 1/1 Direct3D 10

  Read the article

• SD Card reader not working on Sony Vaio

  - by TessellatingHeckler

  This laptop (Sony Vaio VGN-Z31MN/B PCG-6z2m) has been installed with Windows 7 64 bit, all the drivers from Sony's VAIO site are installed, and everything in Device Manager both (a) has a driver and (b) shows as working, no exclamation marks or warnings. "Hide empty drives" in Folder options is disabled so the card reader appears, but will not read the card ("please insert a disk in drive O:"). Previously, when the laptop had Windows XP on it, it could read the same card. Also, Windows update suggested driver ("SD Card Reader") doesn't work, Ricoh own drivers install properly but do the same behaviour. Other 3rd party driver suggestions from forums (Acer and Texas-Instruments FlashMedia) do not seem to install properly. I would post the PCI id if I had it, but it was just showing up as rimsptsk\diskricohmemorystickstorage (while it had the Ricoh Driver installed). Edit: If there are any lower level diagnostic utlities which might shed more light on it I'd welcome hearing of them. Anything which might show get it to put troubleshooting logs in the event log or identify chipsets or whatever... Update: Device details are: SD\VID_03&OID_5344&PID_SD04G&REV_8.0\5&4617BC3&0&0 : SD Memory Card PCI\VEN_8086&DEV_2934&SUBSYS_9025104D&REV_03\3&21436425&0&E8: Intel(R) ICH9 Family USB Universal Host Controller - 2934 PCI\VEN_1180&DEV_0476&SUBSYS_9025104D&REV_BA\4&1BD7BFCD&0&20F0: Ricoh R/RL/5C476(II) or Compatible CardBus Controller RIMSPTSK\DISK&VEN_RICOH&PROD_MEMORYSTICKSTORAGE&REV_1.00\MS0001: SD Storage Card PCI\VEN_1180&DEV_0592&SUBSYS_9025104D&REV_11\4&1BD7BFCD&0&24F0: Ricoh Memory Stick Host Controller WPDBUSENUMROOT\UMB\2&37C186B&1&STORAGE#VOLUME#_??_RIMSPTSK#DISK&VEN_RICOH&PROD_MEMORYSTICKSTORAGE&REV_1.00#MS0001#: O:\ STORAGE\VOLUME\{C82A81B8-5A4F-11E0-AACC-806E6F6E6963}#0000000000100000: Generic volume PCI\VEN_1180&DEV_0822&SUBSYS_9025104D&REV_21\4&1BD7BFCD&0&22F0: SDA Standard Compliant SD Host Controller ROOT\LEGACY_FVEVOL\0000 : Bitlocker Drive Encryption Filter Driver PCI\VEN_1180&DEV_0832&SUBSYS_9025104D&REV_04\4&1BD7BFCD&0&21F0: Ricoh 1394 OHCI Compliant Host Controller Now going to search for drivers for that.

  Read the article

• Unable to back up SQL Server databases using a maintenance plan

  - by Stephen Jennings

  I am trying to create a maintenance plan that will run automatically and back up my SQL Server 2005 databases automatically. I create a new maintenance plan and add a "Back Up Database Task", select all databases, and choose a path to back up to. When I save and try to execute this plan, I get the following error message: =================================== Execution failed. See the maintenance plan and SQL Server Agent job history logs for details. =================================== Job 'Backup.Subplan_1' failed. (SqlManagerUI) ------------------------------ Program Location: at Microsoft.SqlServer.Management.SqlManagerUI.MaintenancePlanMenu_Run.PerformActions() I've checked the maintenance plan log, the agent log, and just about every log file I can find and there are no entries at all to help me figure out why this is failing. If I right-click on a specific database and select "Back Up", the task succeeds. I tried changing the plan to back up just that one database and it still failed. I've tried running the plan with both Windows authentication and SQL Server authentication with the sa account. I also tried specifically granting the SQL Server Agent user account full privileges on the backup folder, but it still failed. While searching the web for clues, the only solution I've run across so far suggests running sp_configure 'allow_update', 0. I tried this but allow_update was already set to 0 and it did not fix the problem. The Windows server and SQL Server have all updates applied to them. Thanks for any suggestions!

  Read the article

• Windows scheduled task fails to complete with error code 0xc000013a

  - by Brian

  I'm using Windows Server 2003 and have a scheduled task that fails to complete. The task is set to run a Windows Command Script (.cmd) at 3pm each day. The script runs a program that extracts some data from a SQL Server database and uploads that data to an FTP server. The error code displayed in the "Last result" column of the scheduled tasks folder is 0xc000013a. A quick Google search leads to this Microsoft support page that states: The most common "C" error code is "0xC000013A: The application terminated as a result of a CTRL+C". No-one is logged in at the time the task runs, so there's no-one around to press CTRL+C. I'm not sure I understand what is being said here in the Microsoft documentation. I've checked the rudimentary things - the scheduled task is enabled, scheduled to run each day, and pointing to a file that does exist in a valid location. Interestingly, when I run this task manually (either by running the .cmd script from the command line, or by right-clicking the task and clicking "Run") the task completes successfully. What does this error code mean, and how can I get this task to run when I'm not there to force it?

  Read the article

• How to install OS X *.TTC font on Windows? Error: "*.TTC does not appear to be a valid font"

  - by Chris W. Rea

  I own both a Mac running OS X 10.6 Snow Leopard, and a PC running Windows 7. On my Mac is a font called "AmericanTypewriter.ttc". I'd like to use that font on my PC, for a specific creative project. I was able to copy the actual font file over to the PC, but when I try to install it into the Windows Fonts folder I get the following error message: "Cannot install (FONTNAME).ttc - The file '(FONTNAME).ttc' does not appear to be a valid font." Can *.TTC format font files be installed on Windows? If so, how? Thanks! UPDATE: I downloaded the source code for a simple ttc2ttf utility (ttc2ttf_AA.tar.gz) found at this Japanese page and compiled it under cygwin via g++. The resulting executable extracted a single file, "AmericanTypewriter.ttf", from the TTC / True Type Collection. (Why have a collection with only one file!?) However, I still get an error message similar to the one above when I try to install the resulting AmericanTypewriter.ttf onto Windows. I'm stumped again. p.s. I no longer need this font on Windows, but now I'm determined to figure out why & how-to :-)

  Read the article

< Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >