Search Results

Search found 24253 results on 971 pages for 'multiple monitor'.

Page 487/971 | < Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >

• Can I set up a 2nd home wireless router, with router2 connecting to the internet through a desktop which is wirelessly connected to router1?

  - by gil b.

  Hi, I apologize for the crudeness of my MSPaint drawing, but please view my diagram of what I'd like to accomplish: Proposed home network architecture Currently, all devices are connected to 1 wireless router. I would like to make my own subnet, with a box in-between my subnet and the shared wireless router, so that I can learn about IDS, traffic analysis, etc. I was also given a cisco PIX firewall to play around with, and it'd be an added bonus if I could incorporate that into my network. The reason for this proposed architecture is so that I can monitor all MY traffic, without seeing anything going on with my roommates' traffic. my MAIN Question is, is it possible to have my desktop connect to the wireless router with internet via wireless card AND share that connection via the ethernet card, hooked to wireless router 2? cable modem - wireless router - desktop pc connected wirelessly - wireless router 2 getting internet from wired connection to desktop pc - laptops connected wirelessly The PIX can be left out for now, but I'm wondering if it could eventually be incorporated? THANKS!

  Read the article

• Media center consumes all available memory when attempting to play music off of a server

  - by RCIX

  I have Windows 7 Ultimate, and recently, when i try to play a song off of my Twonky Media Server/Windows Media Connect (based on an HP WHS with an Atom), it plays choppily. When i open Resource Monitor, it shows that after ordering the music to play, memory usage rapidly spikes to consume most, if not all, of the available memory on my system (excluding a couple hundred megabytes in standby). Why does it do this and is there anything i can do to stop it? Edit: it happens when I attempt to browse the server's music, not just when i play music. Edit 2: the "ehshell" process is what consumes the memory, appears to me something specific to media center. Moreover, the ehshell process doesn't die in this case. Edit 3: It only happens when browsing my Twonky library, and not my Windows Media Connect.

  Read the article

• Is there a standard pattern for scanning a job table executing some actions?

  - by Howiecamp

  (I realize that my title is poor. If after reading the question you have an improvement in mind, please either edit it or tell me and I'll change it.) I have the relatively common scenario of a job table which has 1 row for some thing that needs to be done. For example, it could be a list of emails to be sent. The table looks something like this: ID Completed TimeCompleted anything else... ---- --------- ------------- ---------------- 1 No blabla 2 No blabla 3 Yes 01:04:22 ... I'm looking either for a standard practice/pattern (or code - C#/SQL Server preferred) for periodically "scanning" (I use the term "scanning" very loosely) this table, finding the not-completed items, doing the action and then marking them completed once done successfully. In addition to the basic process for accomplishing the above, I'm considering the following requirements: I'd like some means of "scaling linearly", e.g. running multiple "worker processes" simultaneously or threading or whatever. (Just a specific technical thought - I'm assuming that as a result of this requirement, I need some method of marking an item as "in progress" to avoid attempting the action multiple times.) Each item in the table should only be executed once. Some other thoughts: I'm not particularly concerned with the implementation being done in the database (e.g. in T-SQL or PL/SQL code) vs. some external program code (e.g. a standalone executable or some action triggered by a web page) which is executed against the database Whether the "doing the action" part is done synchronously or asynchronously is not something I'm considering as part of this question.

  Read the article

• gltail “Missing gem net-ssh”

  - by Ian

  I'm attempting to get gltail set up on my local system to monitor logs remotely. I've got all the dependencies installed, but when I go to run gltail ... ./gl_tail configfile ../config.yaml I get this output: Missing gem net-ssh. Ubuntu: sudo gem install -y net-ssh -r .. which I've done a number of times. Here is the output: dev@ubuntu:~/Desktop/Fudge-gltail-e5b252d/bin$ sudo gem install net-ssh Successfully installed net-ssh-2.0.15 1 gem installed Installing ri documentation for net-ssh-2.0.15... Installing RDoc documentation for net-ssh-2.0.15... But when I go to run it again, I get the same missing gem net-ssh error. dev@ubuntu:~/Desktop/Fudge-gltail-e5b252d/bin$ which ruby /usr/bin/ruby dev@ubuntu:~/Desktop/Fudge-gltail-e5b252d/bin$ which gem /usr/bin/gem Why isn't net-ssh being seen as properly installed?

  Read the article

• Monitoring server room temperature

  - by user640

  I have a small server room with its own AC unit. Recently, the AC died, and the temperature increased from 70 F to 90 F. We rarely go in this room, so I was lucky that someone happened to notice that the fans were running a lot louder than normal as they walked past the door. It looks like I need a way to be notified when the temperature in that room gets too hot. What tools are you using to monitor the temperature in your server room? How does this tool notify you of a problem (email, SNMP, etc). Note: I've read this question on server temperature, but I'm interested in the whole room, not just the inside of a server case. Edit: Thanks for all the great responses so far! Many of these products measure much more than just temperature. What else should I be looking at and why?

  Read the article

• how to know application is going to destroy/remove?

  - by Bhavesh Jethani

  My requirement is, i want to cancel my alarm manager or services when application going to destroy/closed. if i am in activity A by clicking on button started activity B suddenly user is going to press home button. ---- if application is running in background then don't cancel service. but when he going to remove from recent list of application at that time cancel service. Service/Alarm manager will work even when user has sent application in background by pressing home screen. No of way application can destroy or removed. 1) by clicking back button multiple times if stack have multiple activities. 2) by pressing home button and then remove from recent list. i am facing issue with (2)second option. in that when user press home button at that time service or alarm manager should be work. But when user will be going to remove application from recent list at that time i want to cancel service/alarm manager. Second issue. my service is called at fix interval of time. if i will write code on onCreate(), onDestroy() in each activity. then timer will start from beginning. Is there any listners who talk me application is going to closed?

  Read the article

• How to stop iPhone's safari browser from silently dropping tabs when you open a 9th tab?

  - by MattH

  Currently in the iPhone safari mobile browser, if you have 8 tabs open and open a new tab, the new tab opens as requested, but one of the existing tabs is silently discarded. Is there any known way to change this behaviour, e.g. to prompt me first and allow me to choose which tab to close, or to open the 9th tab, or to at least have visibility of what tab was closed? When I open something in a new tab it's because I want to come back to the previous tab later, so this conflicts with the way I usually browse the web. My current workaround is to manually monitor the tab count -- i.e. to check that the count is 7 or less before opening a new tab.

  Read the article

• Monitoring several remote servers over different VPNs

  - by Ciaran

  I'm a developer with about 20 different clients running our server application. I access each of the clients' servers remotely through VPN to provide support, updates, etc. Is there any tool available that I can set up locally that will connect through each of the VPNs automatically to allow me to monitor? The idea sounds very far fetched to me as the VPN software varies a good bit but maybe someone's had to do something similar before? It's been a few years since I last used Nagios but I think it'd be quite cool to have that set up pointing at each of the remote servers through VPN somehow.

  Read the article

• How to get started setting up IP security cameras

  - by dave

  I have just finished renovating my house. As part of the job, I have cat6 cable run through the house, including two external plugs. All cables terminate in the same location. My rough plan is to plug two IP cameras to monitor the front and rear, run POE from a central router to the two external cameras, plug my PC into the same router and run magic software X. Any machine plugged into the router or wirelessly connection should then be able to get a live feed and alerts based on motion detection. That's the plan, but I'm not sure how possible it is. What hardware to get and what monitoring software to get. Has anyone does something similar? What were your experiences?

  Read the article

• Getting Synergy+ to work with Windows 7 64bit and Windows XP 32bit?

  - by john crisp

  My Windows XP box is Dell 4550 dimension. Windows 7 box is Home Premium. Synergy + installs fine on the Windows 7box, but using Windows xp as the client, it won't work? Do I need to disconnect the vga connection from my monitor and control entirely from the win7 dvi connection? In setting up ( links ) on Windows 7 as the server, I have NO way of inputing info? The setup on the Windows xp box is simple and does so OK, but I can't connect to the Windows xp box! It must be the vga connection on the Windows XP box. In order to use both machines, I have to turn one off and the other on. Hence-the VGA is needed on Windows XP. Any info/help most appreciated.

  Read the article

• Mac OS X app window is too large - how can I resize?

  - by Kyle Cronin

  I'm a MacBook user, and when I'm home I plug into a large external monitor to get additional screen space. When I'm on the go I disconnect and use my laptop's built-in display. For the most part this arrangement works very well; however, I occasionally run into an issue where I'll resize an app on the external, causing it to be too large to fit on the built-in screen when I disconnect. Most apps don't have a problem decreasing their height automatically or resizing to fit when I click the green orb, but some (like iTunes) don't want to cooperate. How can I resize apps like iTunes without reconnecting to my external? Here's a screenshot:

  Read the article

• Logic for family tree program

  - by david robers

  Hi All, I am creating a family tree program in Java, or at least trying to. I have developed several classes: Person - getters and setter for name gender age etc FamilyMember - extends Person getters and setters for setting arents and children Family - which consists of multiple family members and methods for adding removing members FamilyTree which is the main class for setting relationships. I have two main problems: 1) I need to set the relationships between people. Currently I am doing: FamilyMember A, FamilyMember B B.setMother(A); A.setChild(B); The example above is for setting a mother child relationship. This seems very clunky. Its getting very long winded to implement all relationships. Any ideas on how to implement multiple relationships in a less prodcedural way? 2) I have to be able to display the family tree. How can I do this? Are there any custom classes out there to make life easier? Thanks for your time...

  Read the article

• XSLT how to merge some lists of parameters

  - by buggy1985

  Hi, I have an URL Structure like this: http://my.domain.com/generated.xml?param1=foo&param2=bar&xsl=path/to/my.xsl The generated XML will be transformed using the given XSL Stylesheet. The two other parameters are integrated too like this: <root> <params> <param name="param1">foo</param> <param name="param2">bar</param> </param> ... </root> Now I want to create with XSLT a link with a new URI that keeps the existing parameters and adds one or multiple new parameters like page=3 or sort=DESC. If the given parameter already exists, it should be replaced. I'm not sure how to do this. How to pass multiple (optional) parameters to a template. How to merge two lists of parameters. Any ideas? Thanks ;)

  Read the article

• "Fuzzy" Display Problems on New OpenSUSE 11.3 Install

  - by Kryten

  Hi, I have a old Desktop that has a new installation of OpenSUSE 11.3 on it. To get straight to the point, whenever I try to start-up OpenSUSE, my display goes "fuzzy" (almost like a badly tuned TV) and sometimes (not always) my monitor goes black and says "Out of Range: 15.6kHz/49Hz": I assumed that this was a driver problem, so I download the drivers from nvidia and ran the shell script, completed and rebooted. Then OpenSUSE failed to boot with something like "nscd failed to start". At that point I decided to re-install and I did, but this time I tried un-checking "Automatic Configuration" to see if that helped. Got through the install and still have a problem. Unfortunately, my Linux troubleshooting skills are non-existent, so has anyone got any ideas on what could be the problem (is it the display driver?) and how I can fix the problem?

  Read the article

• PHP Socket Server vs node.js: Web Chat

  - by Eliasdx

  I want to program a HTTP WebChat using long-held HTTP requests (Comet), ajax and websockets (depending on the browser used). Userdatabase is in mysql. Chat is written in PHP except maybe the chat stream itself which could also be written in javascript (node.js): I don't want to start a php process per user as there is no good way to send the chat messages between these php childs. So I thought about writing an own socket server in either PHP or node.js which should be able to handle more then 1000 connections (chat users). As a purely web developer (php) I'm not much familiar with sockets as I usually let web server care about connections. The chat messages won't be saved on disk nor in mysql but in RAM as an array or object for best speed. As far as I know there is no way to handle multiple connections at the same time in a single php process (socket server), however you can accept a great amount of socket connections and process them successive in a loop (read and write; incoming message - write to all socket connections). The problem is that there will most-likely be a lag with ~1000 users and mysql operations could slow the whole thing down which will then affect all users. My question is: Can node.js handle a socket server with better performance? Node.js is event-based but I'm not sure if it can process multiple events at the same time (wouldn't that need multi-threading?) or if there is just an event queue. With an event queue it would be just like php: process user after user. I could also spawn a php process per chat room (much less users) but afaik there are singlethreaded IRC servers which are also capable to handle thousands of users. (written in c++ or whatever) so maybe it's also possible in php. I would prefer PHP over Node.js because then the project would be php-only and not a mixture of programming languages. However if Node can process connections simultaneously I'd probably choose it.

  Read the article

• Gnome 3 screensaver (not suspend) resume hook?

  - by Daniel

  Since whenever my laptop screen resumes sleeping (i.e. wakes up from screensaving) some settings are reset, such as keyboard backlight, I'd like to run some scripts each time this happens. I'm using gnome 3 with fedora 17 by the way. When researching this issue I came across pm-utils which allows one to hook anything to events handled by pm-utils but it seems to me monitor sleeping (i.e. screensaving) is not one of them. Looks like pm-utils only handles suspend and hybernate. So is there a way to hook up custom programs to screensaver?

  Read the article

• How do I put an ASP.NET website project and class library projects in one .sln file on Subversion

  - by JustinP8

  My company has several class libraries we use in multiple website projects (not web application projects). Website projects don't have .sln files, but I'm sure I've read in my past research that you can make a blank solution and put your website and class library projects in it. After answers to my previous questions, this is the direction that I'm going (based slightly on [http://amadiere.com/blog/2009/06/multiple-subversion-projects-in-one-visual-studio-solution-using-svnexternals/][1]: /websites /website1 /trunk /website1 /libraries /library1 /trunk /library1 /library2 /trunk /library2 /etc... Then I planed on using svn:externals to copy /library1, /library2, and so on into the working_copy/websites/website1/ folder. I want my team members to be able to checkout the /trunk folder for website1 and get a .sln file, /library1 external, /library2 external, etc. I want that .sln file to contain the website1 website project, and all of the library external projects. Hopefully that would look something like: /working_copy /websites /website1 /trunk /website1 /library1 (svn:external of libraries/library1/trunk/library1) /library2 (svn:external of libraries/library2/trunk/library2) /etc. website1.sln So, at the end of all of this, the goal is that my teammates check out the trunk, open the solution, and everyone has the exact same solution. When we commit, everything is committed appropriately to subversion (the website code, and the libraries are committed to their appropriate place on the repo). How have others solved these issues? How can I make a .sln file that my team members and I can share in this manner? [1]: "This Article"

  Read the article

• MS Access (Jet) transactions, workspaces & scope

  - by Eric G

  I am having trouble with committing a transaction (using Access 2003 DAO). It's acting as if I never had called BeginTrans -- I get error 3034 on CommitTrans, "You tried to commit or rollback a transaction without first beginning a transaction"; and the changes are written to the database (presumably because they were never wrapped in a transaction). However, BeginTrans is run, if you step through it. I am running it within the Access environment using the DBEngine(0) workspace. The tables I'm updating are all opened via a Jet database connection (to the same database) and updated using DAO.Recordset.update. The connection is opened before starting BeforeTrans. I'm not doing anything weird in the middle of the transaction like closing/opening connections or multiple workspaces etc. There is one nested transaction level (basically it's wrapping multiple transacted updates in an outer transaction, so if any fail they all fail). The inner transactions run without errors, it's the outer transaction that doesn't work. Here are a few things I've looked into and ruled out: The transaction is spread across several methods and BeginTrans and CommitTrans (and Rollback) are all in different places. But when I tried a simple test of running a transaction this way, it doesn't seem like this should matter. I thought maybe the database connection gets closed when it goes out of local scope, even though I have another 'global' reference to it (I'm never sure what DAO does with dbase connections to be honest). But this seems not to be the case -- right before the commit, the connection and its recordsets are alive (I can check their properties, EOF = False, etc.) My CommitTrans and Rollback are done within event callbacks. (Very basically, a parser program is throwing an 'onLoad' or 'onLoadFail' event at the end of parsing, which I am handling by either committing or rolling back the inserts I made during processing.) However, again, trying a simple test, it doesn't seem like this should matter. Any ideas why this isn't working for me? Thanks.

  Read the article

• What's an easy way to shut down a computer that I'm connected to via RDP

  - by MBraedley

  I have a secondary machine on my local network that I usually use via RDP. Most of the time, it's on 24/7, but there are times when I may want to shut it down from the RDP client machine. The shutdown and restart options aren't available from the Windows XP start menu when you connect to a machine via RDP, so how can I shut this machine off without actually going to the physical machine? Also note that this computer currently doesn't have a monitor attached to it, which is partly why I want to be able to shut it down over RDP.

  Read the article

• select query from mysql_num_rows

  - by Andi Nugroho

  i want create multiple search where statement $where_search is a multiple condition from post form. but stil error when iam using this code ".where_search." in where condition with mysql_num_rows for paging $tampil2 = mysql_query("SELECT * FROM bb where ".$where_search." and kd_kelompok='2' and kd_komoditi='11' and nm_sebutan IS NOT NULL " ); this is the complete code. $where_search = "kd_pok='2' and kd_komoditi='11' "; if (isset($_POST['lakpus'])) { if (empty($_POST['lakpus'])) { } else { if (empty($where_search)) { $where_search .= "lakpus = '$lakpus' "; } else { $where_search .= "AND lakpus = '$lakpus' "; } } } if (isset($_POST['kd_por'])) { $kd_por = $_POST['kd_por'] ; if (empty($_POST['kd_por'])) { } else { if (empty($where_search)) { $where_search .= "kd_por = '$kd_por' "; } else { $where_search .= "AND tab1.kd_por = '$kd_por' "; } } } $max=15; $tampil2 = mysql_query("SELECT * FROM bb where ".$where_search." and kd_kelompok='2' and kd_komoditi='11' and nm_sebutan IS NOT NULL " ); $jml = mysql_num_rows($tampil2); $jmlhal = ceil($jml/$max);

  Read the article

• How to check use of userva boot option on Win 2K3 server

  - by Tim Sylvester

  I have some 32-bit Win2K3 servers running an application that fails now and then apparently due to heap fragmentation. (Process virtual bytes grows, private bytes does not) I do not have access to the source code or build process of this application. I have modified the boot.ini file on one of these servers to include /userva=2560, half way between the normal mode of operation and the /3GB option. Normally it takes weeks to reach the point of failure, but I'd like to see right away whether this has actually had any effect. As I understand it, this option limits the kernel to the remaining address space (1536MB instead of 2048), but does not necessarily give an application the extra address space, depending on the flags in the application's PE header. How can I determine whether the O/S is allowing a particular application, running in production, to access address space above 2GB? Additionally, what's the best way to monitor the system to ensure that the kernel is not starved for address space, and more generally how should I go about finding the optimal value for this setting?

  Read the article

• Ubuntu server: Delete first folder in directory

  - by Martin

  How can I grab the first subfolder in a directory and delete it? I found a script to monitor the free diskspace. It sends an alert email if space runs low, but I want to also delete some unneeded stuff. I have a backup folder where I save daily and monthly backups. I want to delete the first folder since this always the oldest, but I don't know the name of the oldest backup. My folders without Jan-May and Dec: 06-01 07-01 08-01 09-01 10-01 11-01 Friday Monday Saturday Sunday Thursday Tuesday Wednesday How can I delete the first folder "06-01" without knowing its name?

  Read the article

• Very fast Laptop Heating due to very high CPU usage by dwm.exe

  - by Sushan Shrestha

  My laptop gets heated very fast and when I check the task manager, I find dwm.exe consuming very high CPU (mostly 100%). In the beginning I found the message "The graphic adapter has been stopped and recovered".Also I am getting one error message "Cidaemon.exe has stopped working" very frequently. During this period also, cpu usage is 100% which is consumed by dwm.exe. I have run ccleaner and Kingsoft PC doctor monitor to fix the register problem but the problem has not been solved. My display adaptor is : NVIDIA NVS 5200M. After the driver update, I am not getting "The graphic adapter has been stopped and recovered" but dwm.exe is still consuming 100% CPU one time in about 5 mins. Multiple restarts has not helped. Laptop Model: Dell Latitude E6430. Thanks in advance.

  Read the article

• Drivers and Codec Compilations

  - by Pennf0lio

  Hi, Do you know any software or compilations that you recommend to handle drivers and codecs for newly formated computer? I am having problem gathering drivers and codecs when I format my computer or other's computer because we frequently misplace it's original drivers. I need an offline solution that doesn't need internet. Same for as the codec, when formating computer we frequently lost our codecs, are there codec packs you know that you would like to recommend? P.s. I had tried driver bot but it's only good when your online, I'm looking for a complete package that has all the driver to most common hardware (eg. Monitor, Sound, etc). Thanks!

  Read the article

• Server 2008 locks me out when not using the machine for 10 minutes after installing SP2

  - by Daniel Magliola

  I have recently installed Service Pack 2 on my Windows Server 2008 machine (which I use actively for development, and i'm always logged on to). Now, after this installation, when I don't use the machine for some time (let's say, 10 minutes), it locks itself so I have to press Ctrl+Alt+Del and log back in. I have already checked the Screen Saver settings, and it's "None", as it always has been. I also looked into power settings and everything looks right (20 mins to turn off monitor, and i haven't found any settings regarding locking me in there). Do you have any idea what I can do so that it won't lock me out after not using the machine for a while? Thanks! Daniel

  Read the article

< Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >