Search Results

Search found 69096 results on 2764 pages for 'theoretical problem'.

Page 487/2764 | < Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >

• AHCI, Windows 7 and can only boot with Windows DVD present

  - by Rob Pridham

  Foolishly, I installed Windows 7 with my new SSD set to IDE. I would like to change it to AHCI. I have done this before, with a different motherboard. What happens: I set the controller to AHCI in the BIOS; I also check correct boot order On boot, I get the 'BOOTMGR not found' error I use the Windows Recovery Console on the DVD Diskpart etc can see the disks, and bootrec claims to have rewritten the MBR/bootloader I reboot, same problem Recovery Console again and it detects a problem, fixes, reboots Recovery Console again and it detects the OS, and a problem - fixes, reboots I ignore the 'press any key to boot from DVD' prompt Windows boots fine I restart without the DVD and I'm back to square one That optional 'press a key to boot from DVD' stage is something that the recovery process introduces - normally you have to choose to boot to the DVD at the BIOS stage. You also see this when installing Windows. I suspect that whatever temporary state that is is compatible with AHCI - but not the standard it returns to. I have done the msahci/iaStorV registry hacks to no avail (this worked with the previous board). I can put it back to IDE where normal service is resumed. The board is an Asus M5A99X, the southbridge is AMD SB950, and this is Windows 7 x64. I would quite like not to have to reinstall it again. Any ideas as to what I can do as a permanent fix?

  Read the article

• VPS goes slow at more than 20 users online at the same time

  - by hachiari

  I have 512 MB VPS (brustable to 1GB) Somehow, the site goes slow when there are about 10 users, and becomes impossible to load at 20 users online at the same time. I wonder what could be the problem for this. The bandwidth connection of the VPS is 1Gbps. Here is some settings in my VPS: KeepAlive Off <IfModule prefork.c> StartServers 7 MinSpareServers 7 MaxSpareServers 10 ServerLimit 64 MaxClients 64 MaxRequestsPerChild 0 </IfModule> my.cnf settings - calculated Max Memory 300MB Output from UNIXBENCH INDEX VALUES TEST BASELINE RESULT INDEX Dhrystone 2 using register variables 376783.7 13429727.4 356.4 Double-Precision Whetstone 83.1 1137.5 136.9 Execl Throughput 188.3 1637.4 87.0 File Copy 1024 bufsize 2000 maxblocks 2672.0 148868.0 557.1 File Copy 256 bufsize 500 maxblocks 1077.0 79430.0 737.5 File Read 4096 bufsize 8000 maxblocks 15382.0 1410009.0 916.7 Pipe Throughput 111814.6 4419722.0 395.3 Pipe-based Context Switching 15448.6 561505.1 363.5 Process Creation 569.3 10272.7 180.4 Shell Scripts (8 concurrent) 44.8 514.3 114.8 System Call Overhead 114433.5 3537373.8 309.1 ========= FINAL SCORE 295.0 I am afraid that the VPS company limit the number of connection to the VPS... is it possible? The server is in Japan, but the site has global traffic (some of the traffic are from countries with low speed connection). Could this be the problem? This is a serious problem :( my site just cant grow if this keeps on happening... please tell me if you have any idea. Thank You, Bryant

  Read the article

• scalable background image of popup. html, css

  - by Mayur

  Hi All, I'm getting a problem in html and css, I used a bg image for my popup window whose size is 500px width and 400px height; having a scrollable text in it. but problem is that if i reduce a size of browser it get distorted. Please help me if i can make it scalable background and according to that text as per browser size. Thanks Mayur Mate

  Read the article

• what is the point of return in ruby?

  - by Sam

  What is the difference between return and just putting a variable such as the following: return def write_code(number_of_errors) if number_of_errors > 1 mood = "WTF" else mood = "No Problem" end mood end no return def write_code(number_of_errors) if number_of_errors > 1 mood = "WTF" else mood = puts "No Problem" end return mood end

  Read the article

• code to identify the number

  - by [email protected]

  Hi All, I got one problem while doing one TAPI application based project in C#. I'm using ITAPI3.dll My problem is.. i'm not getting incoming call information. To get the incoming call information, i'm using the getcallinfo function, but it is showing empty message.

  Read the article

• How do I do distributed UML development (à la FOSS)?

  - by James A. Rosen

  I have a UML project (built in IBM's Rational System Architect/Modeler, so stored in their XML format) that has grown quite large. Additionally, it now contains several pieces that other groups would like to re-use. I come from a software development (especially FOSS) background, and am trying to understand how to use that as an analogy here. The problem I am grappling with is similar to the Fragile Base Class problem. Let me start with how it works in an object-oriented (say, Java or Ruby) FOSS ecosystem: Group 1 publishes some "core" package, say "net/smtp version 1.0" Group 2 includes Group 1's net/smtp 1.0 package in the vendor library of their software project At some point, Group 1 creates a new 2.0 branch of net/smtp that breaks backwards compatibility (say, it removes an old class or method, or moves a class from one package to another). They tell users of the 1.0 version that it will be deprecated in one year. Group 2, when they have the time, updates to net/smtp 2.0. When they drop in the new package, their compiler (or test suite, for Ruby) tells them about the incompatibility. They do have to make some manual changes, but all of the changes are in the code, in plain text, a medium with which they are quite familiar. Plus, they can often use their IDE's (or text editor's) "global-search-and-replace" function once they figure out what the fixes are. When we try to apply this model to UML in RSA, we run into some problems. RSA supports some fairly powerful refactorings, but they seem to only work if you have write access to all of the pieces. If I rename a class in one package, RSA can rename the references, but only at the same time. It's very difficult to look at the underlying source (the XML) and figure out what's broken. To fix such a problem in the RSA editor itself means tons of clicking on things -- there is no good equivalent of "global-search-and-replace," at least not after an incomplete refactor. They real sticking point seems to be that RSA assumes that you want to do all your editing using their GUI, but that makes certain operations prohibitively difficult. Does anyone have examples of open-source UML projects that have overcome this problem? What strategies do they use for communicating changes?

  Read the article

• How can I make properties in properties files mandatory in Spring?

  - by Paulo Guedes

  I have an ApplicationContext.xml file with the following node: <context:property-placeholder location="classpath:hibernate.properties, classpath:pathConfiguration.properties" /> It specifies that both properties files will be used by my application. Inside pathConfiguration.properties, some paths are defined, such as: PATH_ERROR=/xxx/yyy/error PATH_SUCCESS=/xxx/yyy/success A PathConfiguration bean has setters for each path. The problem is: when some of those mandatory paths are not defined, no error is thrown. How and where should I handle this problem?

  Read the article

• Disk Activity Alert Windows SBS 2003 on Dell PowerEdge 830 with Raid

  - by Ron Whites

  Background: I have a Dell PowerEdge 830 Server running Windows SB Server 2003. It has 4gbs of RAM and a ATA CERC SATA 6CH controller with 3 160gb drives in a Raid 5 configuration. The Problem I am seeing Admin ---"Disk Activity Alert on Server" emails These often occur when disk backups, de-frag or high disk usage is going on. Generally the server isn't over stressed. The Disk Alert emails say in part ... The following disk has low idle time, which may cause slow response time when reading or writing files to the disk. Disk: 0 C: F: D: Review the Disk Transfers/sec and % Idle Time counters for the PhysicalDisk performance object. If the Disk Transfers/sec counter is consistently below 150 while the % Idle Time counter remains very low (close to 0), there may be a problem with the disk driver or hardware. The Questions I have: With what utility can I review the Disk Transfers/sec and Idle Time? It appears there is no utility for that on the server! I think I may need to download a very large (two DVD) Dell "OpenManage" utility to be able to monitor the raid system and see what is a problem is that true?

  Read the article

• What could cause Windows 7 to hang whenever I install something?

  - by Larsenal

  I've had this problem when installing several different programs (iTunes, Adobe Acrobat Reader just to name two). Regardless of what the program is, the install usually gets at least 90% through the process and then just hangs. I don't see anything bad in the event log besides the following (and this didn't occur exactly at the time of install): wuaueng.dll (964) SUS20ClientDataStore: A request to write to the file "C:\Windows\SoftwareDistribution\DataStore\DataStore.edb" at offset 16252928 (0x0000000000f80000) for 32768 (0x00008000) bytes succeeded, but took an abnormally long time (185 seconds) to be serviced by the OS. This problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem. I've run check disk and it passed. I've had some problems with BIOS settings in the past with Windows 7, but I'm not sure whether that could be related. Update... I also see this error in the event log: Volume Shadow Copy Service error: Unexpected error querying for the IVssWriterCallback interface. hr = 0x80070005, Access is denied. . This is often caused by incorrect security settings in either the writer or requestor process. Operation: Gathering Writer Data Context: Writer Class Id: {e8132975-6f93-4464-a53e-1050253ae220} Writer Name: System Writer Writer Instance ID: {33493f01-ac1b-4efb-a378-3053ab03100d} One last wrinkle.... I see "Previous versions" of c:\ which look like they correspond to the time of attempted installation.

  Read the article

• using 3rd party dll in enterprise web based application?

  - by mazhar

  I found a great control with example here for mvc It fulfills all my requirement but the problem is that it uses a js tree dll. Should I go on and used that example in my application? Do you people refrain from using 3rd party free dll in applications? How will I tell that it will not expire or not cause problem later on Forgive me if this is inappropriate question but thx in advance for any appropiate reply on this topic. just trying to get the point of view of you people on this

  Read the article

• How to verify system using right GPU, after system reset [duplicate]

  - by Antoros

  This question already has an answer here: Is my mobile AMD card being used? 2 answers OS: Windows 8 CPU: Intel® Core™ i7 Processor 3635QM GPU 1 : Intel HD Graphics 4000 GPU 2 : AMD Radeon™ HD 8870M other info: System Spects Problem: im unsure that CCC is using AMD card instead of Intel's, i have encountered several issues since updating to 8.1 and i don't know what to do What happened: Installed 8.1 patch first day After 1 minute of use, BBSOD, windows never loaded again System restore wouldnt recognize 8.0 restore points i did a system reset to windows 8 since the laptop was only 3 weeks old System Broke, it did restore to factory BUT kept the registry almost intact, i had to install almost everything again, since the factory drivers where working with the updated one's registry and several problems CCC Broke too <- What i've already done Installing new drivers on top of old ones didnt work, so i used AMD uninstaller first Uninstalled and Re-installed Intel's HD Graphics Driver Tried to install mobile center, but AMD told me that it wasnt compatible (even if thats the only driver that they provide via their page as seen Here) Tried to use Auto-Detect, couldnt install driver because card was disabled because it didnt have the drivers... (see what they did here?) Had to use a workaround with Samsung Update, the driver didnt appear as download so had to use search and downloaded the driver manually. Now the graphic card appears on device manager and catalyst but as 8800 series (not exact model), and cant check the card with neither dxdiag/GPU-z/HWMonitor when right-clicking on CCC only Intel card appears launching a game and using as "high performance" would speed it up a little but i cant be sure How to verify its working properly? HWMonitor wont show AMD card even when set to high performance Latest GPU-Z wont work because a problem with Intel's, and legacy ones wont either what can I do now? I don't even know if I fixed my problem or not, and i also want to to use Adobe Premier with it, and its locked (the option to run it with the amd card not intels) Edit: now it seems to work, but cant change the setting for adobe Premiere and other programs that i Need to

  Read the article

• windows 7 monitor instantly resumes from power off

  - by user167328

  It seems that some service or program is preventing my monitor from going into power save mode but I cannot find a way to dig down the cause. Does anybody know a way to find out which event may be causing the problem? Background information: If I leave/lock my computer I want to immediately power off the monitor. Stupid windows has no program for this so I use a third party utility. I use Display.exe from Noel Danjou since 2005 and have had no problem with it on XP, my Notebook with w7 x64 pro and at the office with w7 x64 enterprise. With my new home pc with w7 x64 pro the monitor goes off but instantly comes back on after a second. So I tested using a power plan with the shortest timeout of 1 minute but with that the display never goes off at all. (Setting a power plan timeout is no useful option because then I cannot read a document or watch a movie without the monitor going off) I could try trial and error methods but this is cumbersome and not what I regard as a professional solution. So I would prefer a way to analyze the windows events to find out the reason for the display staying active. Add On: In the meantime I tried safe mode and also exited from all tray programs but the problem is still there. I also checked the BIOS for special power settings but still no solution (P.S. Mobo is H87-G41 PC Mate with latest BIOS rev.)

  Read the article

• why save_model method doesn't work in admin.StackedInline?

  - by FurtiveFelon

  Hi all, I have a similar problem as a previously solved problem of mine, except this time solution doesn't seem to work: http://stackoverflow.com/questions/2991365/how-to-auto-insert-the-current-user-when-creating-an-object-in-django-admin Previously i used to override the save_model to stamp the user submitting the article. Now i need to do the same for comments, it doesn't seem to work anymore. Anyone have any ideas? Thanks a lot! Jason

  Read the article

• LAMP v/s WAMP in PHP

  - by Ajith

  I have a small server problem when working with LAMPP and WAMP server in PHP.I am using LAMPP server for local development and I need to host in WAMP server.When try to read an image from a dynamic created pdf file in LAMPP, it is working perfectly but, the same one not compact able with WAMP server.What will be the problem?Any additional feature need to configure in WAMP.Please help me to go forward.Please........

  Read the article

• Monitor flickers in native resolution.

  - by ptikobj

  With my new Samsung Syncmaster BX2450 I have the following problem: In Windows XP (SP2), all resolutions above 1440x900 have either strange pixel errors or an extreme flickering. It seems, that the effect worsens for higher resolutions. In special, I would like to run the monitor with its native resolution (1920x1080), however I can't watch longer than 5 seconds on the monitor because of the flickering... My Graphics Card is a Geforce FX 5200 with the most up-to-date driver (according to Nvidia.com: Forceware 175.19) and I'm having the monitor connected to its DVI-output. The strange thing is, under Ubuntu 10.04, all resolutions work just perfect, so the display must be alright. edit: seems to be a driver problem... if I use the proprietary NVIDIA drivers in Ubuntu, I have the same problem as in Windows. I would like to reformulate my question: Is there a modified/alternative Geforce FX 5200 driver (as there is in Ubuntu) for Windows that allows me to use 1920x1020 without problems ? I already tried the omega drivers: unfortunately, it still looks poor on the native resolution.

  Read the article

• SBS DC DNS entries going missing?

  - by Chris W

  I've been looking at a problem on a friends SBS (2003) server where the client PC's aren't able to connect to the server with a variety of errors reported. Checking the server itself the only indicator of an issue is an error 5782: Dynamic registration or deregistration of one or more DNS records failed with the following error: No DNS servers configured for the local system. Running a dcdiag reports that there are no DNS records registered for the DC so I fixed the problem by doing a netdiag /fix after which the dcdiag comes back clean and clients are ok again. It happened a few weeks ago as well and the same fix solved it. What are the possible causes of the DC DNS entries going missing? Is this a config option that needs tweaking or could it be solved by something simple like scheduling the SBS server to re-boot periodically? The only change they can think of that was made near to the time of the first instance of this problem occurring is that RRAS was started up to allow for a VPN connection from a home user. NB - The server is setup with a pair of NICs in a team so the server has a single virtual NIC providing both LAN/WAN connections to it. An external hardware firewall is in use rather than the windows firewall.

  Read the article

• Server not accepting uploads

  - by Tatu Ulmanen

  I'm having a strange problem with my VPS: I can download files from it, I can use PuTTy to connect to it and all behaves normally. But sometimes, when I try to upload a file to the server or save a file via SFTP, the connection inexplicably fails. I am using jEdit to edit files remotely via SFTP. When it works, it works fine. When it doesn't, I get an error message: Cannot save: java.io.IOException: inputstream is closed Cannot save: java.io.IOException: 4: I can see that a temporary save file (#file.php#save#) is created on the server with a filesize of 0. So the connection works, but when it comes to sending the actual data, something fails. The same thing with WinSCP, but the error is different: Copying file fatally failed. Copying files to remote side failed. And I can always browse the server with PuTTy without a problem. I see nothing abnormal in any log files. Auth.log shows this when I try to save: sshd[32638]: Accepted password for - from - port 62272 ssh2 sshd[32638]: pam_unix(sshd:session): session opened for user - by (uid=0) sshd[32640]: subsystem request for sftp sshd[32638]: pam_unix(sshd:session): session closed for user - When I wait for a while (say, an hour), everything works fine again. It can't be a temporary ban, as I am still allowed to connect to the server, right? I know this may not be enough info to solve the problem, but I am grateful for any clues or bits of information that might help me. What are the possible causes for this kind of behaviour, what log files can I check for clues etc.. I'm running out of ideas!

  Read the article

• How to route broadcast packets from machine with two network interfaces on same subnet

  - by Syam

  I run RHEL 5 and have two NICs on one machine connected to the same subnet: eth0 192.168.100.10 eth1 192.168.100.11 My application needs to receive and transmit UDP packets (both unicast & broadcast) via these interfaces. I've found the way to handle the ARP problem and I've added routes to handle the routing problem: ip rule add from 192.168.100.10 lookup 10 ip route add table 10 default src 192.168.100.10 dev eth0 (and similarly, table 11 for eth1) The problem is that only unicast packets gets routed properly. Broadcast packets always go out through eth0. I tried removing the rule for 192.168.100.0 & 192.168.100.255 from table 255 and adding them to my tables. But then I see ARP requests being given out for packets to 192.168.100.255 (obviously, no nodes respond and nobody gets any data). Due to several techno-political issues, I'm stuck with this configuration and can't change subnets or try something different. I've tried SO_BINDTODEVICE and it works, but I'd prefer a solution that doesn't need my application to run as root. Is there a way to get this working? Any help is highly appreciated.

  Read the article

• Static code analysis tools

  - by Anil Namde

  Whether JavaSript, C# or C++ main problem i face while reading the code is which function is called by which function. This problem is big when dealing with BIG code. Is there any static code analysis tool/technique/plugins using which a graphical representation of the code can be generated(something like below) so that reading/analyzing code becomes easy? .... --outerFuntion() ---innerFunction() ----innerFunction2() --outerFunction2() .... Please provide your inputs/opinions on this Thanks all,

  Read the article

• Weird Apache behaviour and with files again

  - by afifio

  Hi and thanks for stopping by. I have read Weird Apache problem with file, I have read Weird Apache problem with file ...and its not the problem Setup single XAMPP installation on Windows, single windows user, 2HD, 1 is a portable USB. All is fine, until I move the xampp to new portable HD Symptom Old php files - works fine, new one doesnt http://127.0.0.1/Ajax/index.php - yay http://127.0.0.1/test2/t.php - display the source code http://127.0.0.1/Ajax/test2/t.php - display the source code http://127.0.0.1/Ajax/t.php - display the source code Extra Info IIS+MS Web Development stuff, .NET4, Asp, etc is being installed and still hast reboot yet. .htaccess also seems doesnt work Apache2 conf file was modified to Averride All and still it doesnt care. One of the directory supposed to treat .htm as php yet got text, created another directory and edit a phpinfo, still another text, browse to phpmyadmin, viola, works fine Suspect Does Apache honour XP security and permission ? If so, this is a single user computer. Does Apache dont like my new hard disk/new place ? Why it doesnt execute the php in new directory but happily execute in old folder ? Thanks for the riddle answers

  Read the article

• sort utility on cyrillic text

  - by Anton

  I have to sort some lines of cyrillic characters and I want to use the sort utility (on MAC OS X 10.6). The problem is that result is incorrect. I take the text into clipboard, then run pbpaste | sort This is plaintext data, and I also tried passing a file to the sort command. My source data is ??????? ????? ???? ???? ?????? ??????? ???????? ?????? ? ????? ??????????????? ?????????? ???? ?????? And after sorting I get ???? ???? ???? ????? ?????? ?????? ?????? ? ????? ??????????????? ??????? ??????? ???????? ?????????? Theese lines aren’t even grouped by first letter. I tried option -d, but then I get an error sort: string comparison failed: Illegal byte sequence sort: Set LC_ALL='C' to work around the problem. sort: The strings compared were \320\321\321\321' and\320\320\320\321\321\320’. Exporting the variable as recommended doesn’t solve the problem. What can I do to use the sort utility for such a task? Any additional info is necessary?

  Read the article

• Why Would one VLAN have no Communication on one Switch?

  - by Webs

  So the problem is we have a device or host that needs to communicate on a specific VLAN. This VLAN is not new, it is running all throughout our environment and works fine. But the VLAN was recently configured on the switch in question, a Cisco 3750. The DHCP server is handing out addresses on that VLAN with no problem. I have verified the cable between the host and switch and tried multiple hosts, but none of them can communicate or get an address. I plugged my laptop into an empty port which had a different VLAN assigned and immediately got a DHCP address. When I changed that port to the same VLAN I'm having issues with I got the same problem. The laptop just sits there and tries to DHCP an address but nothing happens. I double checked the cores and their Layer 3 VLAN config and its fine too. Plus I figured the issue couldn't be with them because the VLAN works fine everywhere else it exists. So the only other thing I can think of is the switch, but the VLAN exists on the switch and seems to be configured correctly. The trunks appear to be configured just fine as well too. Anyone have any ideas? I'm lost on this one.

  Read the article

• returning JSON response to a ajax call prompts file download containing the response

  - by user200018

  i am submitting a from using jQuery ajax, and server is returning json response. but instead of the script, parsing the json result, the browser is prompting me to download the json response. I have had this problem before, where i forgot to return false at the end of the event handler. But this time im clueless why this is happening. anyone has experienced this problem.. thanks

  Read the article

• How to bind an List<List<String>> to the gridview ?

  - by user301089

  Hi everyone, I'm using the new Telerik Rad Control and I would to use the GridView included. But my problem is I recover with a webservice a List<List<String>> object and I would like to show it into my Datagridview. I try to make a Grid.ItemSource = e.result but nothing appears ;-( What's the problem ? Thanks a lot. Narglix

  Read the article

• Trying to connect to a remte server using Eclipse

  - by Trout

  I have a little problem, I have an Ubuntu server running Tomcat, what I want to do is connect my Eclipse EE to it so I can work with JSP. I have no problem connecting to a similar Tomcat service when its installed on my machine (not a server), but whenever I try to the remote server I don't seem to have the option of choosing a Tomcat service... Is there some guide you can recommend (I didn't find one), or is there something I did wrong? Any help would be appreciated... Trout

  Read the article

< Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >