Search Results

Search found 16587 results on 664 pages for 'virtual hardware'.

Page 487/664 | < Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >

  • Is SSD TRIM support still automatic in 12.10?

    - by dam
    Folks I had automatic TRIM working on my laptop running Ubuntu Precise. As in the TRIM guide I added discard to mount options in /etc/fstab, and hdparm --read-sector read 0s immediately after a rm && sync. Using the very same hardware, laptop and SSD, TRIM seems no longer to be automatic after upgrading to Quantal. I recognise the test in the guide I mentioned above may not necessarily work. SSD erase blocks and all that. But Quantal is at least different. After deleting the file and syncing, its data are still on disk and unerased even after waiting several minutes. fstrim will then 0 the dead file's blocks. Once. Repeat the same test five minutes later, and fstrim does nothing. I figure this is probably really a kernel issue, but that box is too black for my spelunking torch. I'm prepared to believe that kernel 3.5 knows what I want better than I do, and all is well despite appearances, but it looks for all the world like TRIM isn't quite all there any more. Anybody have the scoop on TRIM in Quantal/kernel 3.5?

    Read the article

  • Hard time installing Ubuntu

    - by Nick
    I have a MSI GT780DXR that currently is booting windows 7. I've been trying to dual boot windows 7 and ubuntu for some time now. Here's specs that I think would make a difference Windows 7 500GB*2 RAID 0 hard drives. (Hardware RAID I'm not sure if it's a dedicated RAID card though) 7200RPM Nvidia GT570M Background: I tried to install 12.04 (64 bit) a few times but the Desktop live cd and pendrive boots with a black screen. I've tried wubi but it boots to a black screen as well. I then tried the alternative 12.04 (64 bit) and went through the installation all the way til partitioning. I let Ubuntu notice the raid setup and I setup my swap, /, and home drives, I used my free space to create the three partitions. I tried to resize the windows drive and it told me I couldn't and to be happy with my current setup. When I finally got past I got an error on installing GRUB 2 and decided to skip it and continued on to finish installation. When I tried to boot up I got an invalid partition table error. Windows recovery disc, and a GPARTED live cd couldn't find any hard drives. I ended up following advice and typed this into the recovery command prompt. bootrec /fixmbr bootrec /fixboot bootrec /rebuildBcd It worked and here I am now. The question is, how would I be able to dual boot windows 7 and Ubuntu 12.04 with this information? Thanks,

    Read the article

  • WebLogic Partner Community Newsletter October 2013

    - by JuergenKress
    Dear WebLogic Partner Community member, Our October newsletter edition focuses on Oracle OpenWorld 2013, highlights, keynotes and all presentations. Thanks to all the partners who made the conference a huge success, if you could not come to San Francisco, you can find all the details in this newsletter. We added additional locations for the free hands-on ADF & ADF Mobile Bootcamps & WebLogic Bootcamps. As a community member you can also get a free voucher to become a WebLogic Server 12c Certified Implementation Specialist or ADF 11g Certified Implementation Specialist (limited to partners from EMEA!) If you can not make it to a Bootcamp, do not miss the virtual developer days for WebLogic and ADF Mobile. If you plan to install WebLogic read first the article “Setup a 12c Fusion Middleware Infrastructure from René van Wijk. If you administrate Middleware make sure you read the documentation and support notes Weblogic Server Patching & Maintenance Information Center. In the ADF section of the newsletter our product management team continues with the ADF Architecture on-demand training. Andrejus released the latest version of the ADF Performance Audit Tool v 2.0. The summer is over, if you look for a Christmas present, for your kids or yourself maybe you want to run Java on LEGO® Mindstorms® EV3. Jürgen Kress To read the newsletter please visit http://tinyurl.com/WebLogicNewsOctober2013 (OPN Account required) To become a member of the WebLogic Partner Community please register at http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: WebLogic Community newsletter,newsletter,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • JavaOne Technology Conference Is Coming to Russia

    - by Tori Wieldt
    JavaOne Russia 17-18 AprilRussian Academy of Sciences, MoscowRegister Now JavaOne and Oracle Develop 2012 Russia offers a wide variety of sessions, hands-on labs, keynotes, demos, and the opportunity to network with developer peers. If you’re looking for in-depth sessions on Java technologies and tools, this is the conference for you. Your registration also gets you into Oracle Develop sessions as well, so you can learn about application servers, cloud development and, of course, database development. The JavaOne Russia tracks are:Client-Side Technologies and Rich User ExperiencesLearn about developments in Java for the desktop and practices for building rich, immersive, and powerful user experiences across multiple hardware platforms and form factors. Core Java PlatformDiscover the latest innovations in Java virtual machines. Get deep technical explanations in security and networking and enhancements that allow dynamic programming languages to drive Java platform adoption. Java EE Web Profile, Platform Technologies, Web Services, and the Cloud Update your knowledge on topics such as Web application development, persistence, security, and transactions. This track will also address modularity, enterprise caching, Web sockets, and internet identity. Mobile, Java Card, Embedded, and DevicesThis track is devoted to Java technology as the ultimate platform for mobile computing. It also covers embedded and device usages of Java technologies, including Java SE, Java ME, Java Card, and JavaFX. Share this event: #oracleRU

    Read the article

  • Problem with alleg42.dll / program crashes / Allegro & Codeblocks

    - by user24152
    I'm having a serious problem with allegro. The program should display random pixels on the screen and when I build and run it I get the following error message: Below is the full code of my program: #include <stdio.h> #include <stdlib.h> #include <time.h> #include "allegro.h" #define Text_Color_Red makecol(255,0,0) int main() { int ret; int color_depth = 32; int x; int y; int red; int green; int blue; int color; //init allegro allegro_init(); //install keyboard install_keyboard(); //set color depth to 32 bits set_color_depth(color_depth); //init random seed srand(time(NULL)); //init video mode to 640 x 480 ret = set_gfx_mode(GFX_AUTODETECT_WINDOWED,640,480,0,0); if(ret !=0) { allegro_message(allegro_error); return 1; } //Display string textprintf(screen,font,0,0,10,0,Text_Color_Red,"Screen Resolution is: %dx%d -- Press ESC to quit !",SCREEN_W,SCREEN_H); //display pixels until ESC key is pressed //wait for keypress while(!key[KEY_ESC]) { //set a random location x = 10 + rand() % (SCREEN_W-20); y = 10 + rand() % (SCREEN_H-20); //set a random color red = rand() % 255; green = rand() % 255; blue = rand() % 255; color = makecol(red,green,blue); //draw the pixel putpixel(screen, x, y, color); } //quit allegro allegro_exit(); } END_OF_MAIN() Error message: AllegroPixels1.exe has encountered a problem and needs to close. We are sorry for the inconvenience. Error signature: AppName: allegropixels1.exe AppVer: 0.0.0.0 ModName: alleg42.dll ModVer: 4.2.3.0 Offset: 0006c05c I am using Windows XP inside a virtual machine under Parallels 7.0

    Read the article

  • Twitter Tuesday - Top 10 @ArchBeat Tweets - June 3-9, 2014

    - by OTN ArchBeat
    The Top 10 tweets from @OTNArchBeat for the last seven days. RT @DBAKevlar: #EM12c rel4 is out! Woohoo!! Jun 3, 2014 at 10:36 AM Top 10 Arch Community Articles for May 2014 >> props to @markrittman @kevin_mcginley @porushh et al Jun 4, 2014 at 12:52 PM Architecture of Analytics: @markrittman @kevin_mcginley >> Free OTN Virtual Tech Summit - July 9 Jun 4, 2014 at 09:13 AM My Top 10 Tweets - May 27 - June 2 #ADF #Essbase #FusionApps #Goldengate #Kscope14 #WebLogic. Jun 3, 2014 at 10:27 AM Starting and Stopping a #JavaEE Environment when using Oracle #WebLogic | Rene van Wijk #oracleace Jun 5, 2014 at 11:00 AM Video: #KScope14 Preview: @DebraLilley never stops moving, never stops learning. Jun 3, 2014 at 11:19 AM The OTNArchBeat Daily is out! Stories via @oraclebase Jun 9, 2014 at 01:47 PM Where did my MDB concurrency go? | Eric Gross #weblogic Jun 9, 2014 at 08:48 AM Exalogic Tech tips and code samples from A-Team architect Andrew Hopkinson Jun 6, 2014 at 11:47 AM The OTNArchBeat Daily is out! Stories via @KentGraziano @DBAKevlar @dbasolved Jun 3, 2014 at 01:48 PM adf, essbase,

    Read the article

  • USB mouse pointer only moving horizontally on macbook 6.2 with 12.04

    - by Glyn Normington
    After installing Ubuntu 12.04 on a macbook pro 6.2, the touchpad and external USB mouse worked perfectly. After rebooting I can't get either touchpad or external USB mouse to work. Sometimes no mouse pointer is visible, but more often I can only move the mouse pointer horizontally five sixths of the way across the display (from the top left). I have uninstalled mouseemu. xinput list shows the USB mouse. xinput query-state for the USB mouse shows the following: ButtonClass button[1]=up ... button[16]=up ValuatorClass Mode=Relative Proximity=In valuator[0]=480 valuator[1]=2400 valuator[2]=0 valuator[3]=3 and re-issuing this command with the pointer at its right hand extreme displays the same except for: valuator[0]=1679 So the valuator[0] seems to be the x-coordinate of the pointer and the range of motion 480-1679 is indeed about five sixths of the display width (1440). valuator[1] is suspiciously large given the display height is 900. Perhaps this is a side-effect of having previously been using a dual monitor (although booting with that monitor connected does not help). There are other entries listed under xinput list: Virtual core XTEST pointer which seems stuck at position (840,1050). bcm5974 which seems stuck at position (837,6700). Removing the bcm5974 module using rmmod disables the toucpad as expected but does not fix the USB mouse problem. After adding the module back, it is stuck at position (840,1050) instead of (837,6700). /etc/X11/xorg.conf was generated by nvidia-settings and contains: Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "ZAxisMapping" "4 5" although I don't know how plausible these settings are. Any suggestions?

    Read the article

  • Globacom and mCentric Deploy BDA and NoSQL Database to analyze network traffic 40x faster

    - by Jean-Pierre Dijcks
    In a fast evolving market, speed is of the essence. mCentric and Globacom leveraged Big Data Appliance, Oracle NoSQL Database to save over 35,000 Call-Processing minutes daily and analyze network traffic 40x faster.  Here are some highlights from the profile: Why Oracle “Oracle Big Data Appliance works well for very large amounts of structured and unstructured data. It is the most agile events-storage system for our collect-it-now and analyze-it-later set of business requirements. Moreover, choosing a prebuilt solution drastically reduced implementation time. We got the big data benefits without needing to assemble and tune a custom-built system, and without the hidden costs required to maintain a large number of servers in our data center. A single support license covers both the hardware and the integrated software, and we have one central point of contact for support,” said Sanjib Roy, CTO, Globacom. Implementation Process It took only five days for Oracle partner mCentric to deploy Oracle Big Data Appliance, perform the software install and configuration, certification, and resiliency testing. The entire process—from site planning to phase-I, go-live—was executed in just over ten weeks, well ahead of the four months allocated to complete the project. Oracle partner mCentric leveraged Oracle Advanced Customer Support Services’ implementation methodology to ensure configurations are tailored for peak performance, all patches are applied, and software and communications are consistently tested using proven methodologies and best practices. Read the entire profile here.

    Read the article

  • Can't configure 5.1 audio with 12.04

    - by xster
    I have an Intel ALC892 and a Nvidia GT 520m connected to speakers via HDMI. On lspci, I see 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Subsystem: ZOTAC International (MCO) Ltd. Device a218 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at db400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel 02:00.1 Audio device: NVIDIA Corporation HDMI Audio stub (rev a1) Subsystem: ZOTAC International (MCO) Ltd. Device 2180 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at db080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel My alsamixer looks like I enabled pulseaudio configuration file to have 6 channels. My sound setting looks like When I use the test dialog, only front left and right have sounds. If I use alsa in XBMC on a 5.1 video, there's no sound. If I use pulseaudio, only front right and left have sound. I can barely hear any speech since I'm guessing it's mapped to front center. Any clues?

    Read the article

  • Silverlight Developer needs ASP.NET MVC Training [on hold]

    - by Peet Brits
    With Silverlight on the way out, our company wants to embrace HTML5 and related technologies. Background: Our Silverlight project did everything from generating its own models (or data contracts), sending it over WCF, tracking changes, with a whole deal of back-end code to make the ride smoother, but often also cluttered and more complex. Most of the original developers for this project are gone, and we want to embrace something new for future projects. Having done this very useful MVC Jump Start course at Microsoft Virtual Academy, we are all fired up for the next project. The problem is that we have very little in-depth knowledge of all the many different components. The most important hereof is probably Entity Framework, and (for later) Web API. I suppose the best place to start is at the Microsoft ASP.NET websites. Are there any other suggestions for learning from more experienced developers? I am a senior developer, but my knowledge of ASP.NET MVC (and related) is very limited. PS: We have a project deadline at the end of this month.

    Read the article

  • Video freezes when larger than a certain size

    - by Poyan
    I have a weird problem playing video files. I have a fairly new (a few years old) graphic card that should and has played up to 1080p video files without much a lot of trouble. I seem to be having a weird issue where the video plays back fine if the window is below a certain size, but as soon as the windowsize increases, the picture freezes. The audio still plays. Usually this is mitigated by killing som applications. Especially GTK (?) apps seem to cause this lag, like having a Nautilus window open usually triggers this error for me. With hardware rendering I get the error regardless of application. I have tried enabling software rendering in VLC and that eliminates the problem (but I get other problems using software rendering, so I've avoided it). I know this is pretty fuzzy, but I'm not sure how to approach this problem. Do you have any idea? EDIT: Some more information. I have the correct and latest drivers installed. My graphics card is a Nvidia 7600 GT.

    Read the article

  • Triple-display setup using AMD drivers

    - by Halik
    I am currently running a dual display setup with nVidia 8800GTS video card, on a Ubuntu 12.10 box. The current setup uses nVidia TwinView to render the image on a 1920x1200 display and 1600x1200 one. I'm planning to add a third, 1280x1024 display to the setup. The change will require me to upgrade my GFX card to one supporting triple displays. I'll probably go with Sapphire Radeon 7770 (FLEX edition, to avoid additional active DP-DVI adapters). Before I invest in new GFX I wanted to ask - how well the AMD drivers will support such a setup. It does not matter whether it's fglrx or the OSS ones. If I remember correctly, when running Fedora on a Radeon x800, I had 'void' areas above and below the working area on my second display. The desktop was rendered in 1920+1280 width and 1200 height (which left 176px of vertical space accessible for my cursor and windows but not displayed on the screen - I'd prefer to avoid that). It may have very well been my misconfiguration back then. Generally, are there any solutions from AMD on par with TwinView? Or is it a non-issue at all? Also, I'm wondering about the usual stuff - hardware h264 decoding support, glitch-free flash support, any issues with Compiz/Unity?

    Read the article

  • Series On Embedded Development (Part 3) - Runtime Optionality

    - by Darryl Mocek
    What is runtime optionality? Runtime optionality means writing and packaging your code in such a way that all of the features are available at runtime, but aren't loaded and used if the feature isn't used. The code is separate, and you can even remove the code to save persistent storage if you know the feature will not be used. In native programming terms, it's splitting your application into separate shared libraries so you only have to load what you're using, which means it only impacts volatile memory when enabled at runtime. All the functionality is there, but if it's not used at runtime, it's not loaded. A good example of this in Java is JVMTI, Java's Virtual Machine Tool Interface. On smaller, embedded platforms, these libraries may not be there. If the libraries are not there, there's no effect on the runtime as long as you don't try to use the JVMTI features. There is a trade-off between size/performance and flexibility here. Putting code in separate libraries means loading that code will take longer and it will typically take up more persistent space. However, if the code is rarely used, you can save volatile memory by including it in a separate library. You can also use this method in Java by putting rarely-used code into one or more separate JAR's. Loading a JAR and parsing it takes CPU cycles and volatile memory. Putting all of your application's code into a single JAR means more processing for that JAR. Consider putting rarely-used code in a separate library/JAR.

    Read the article

  • Cheap server stress testing

    - by acrosman
    The IT department of the nonprofit organization I work for recently got a new virtual server running CentOS (with Apache and PHP 5), which is supposed to host our website. During the process of setting up the server I discovered that the slightest use of the new machine caused major performance problems (I couldn't extract tarballs without bringing it to a halt). After several weeks of casting about in the dark by tech support, it now appears to be working fine, but I'm still nervous about moving the main site there. I have no budget to work with (so no software or services that require money), although due to recent cut backs I have several older desktops that I could use if it helps. The site doesn't need to withstand massive amounts of traffic (it's a Drupal site just a few thousand visitors a day), but I would like to put it through a bit of it paces before moving the main site over. What are cheap tools that I can use to get a sense if the server can withstand even low levels of traffic? I'm not looking to test the site itself yet, just fundamental operation of the server.

    Read the article

  • You've been working on a platform for as long as you remember. Not anymore. How does it feel?

    - by Shinnok
    How does it feel to work on a platform for as long as you remember, you've been encouraged to innovate, to improve and give all in day and night for that platform, be it either an operating system, a hardware architecture or a software framework/library and then be forced to switch bases because that platform has been abandoned over the night? It has happened before, many times, for eg. to SGI/IRIX and more recently to SUN/Open Solaris and now Nokia/Symbian. Have you been part of such a shift? If so then please share the story and describe your feelings at that time and if it is the case, how did you manage the situation? Reorientation? Giving up on the field and turned to other things you've been constantly putting aside like family? Many did so(for eg. people at Netscape). You may not think of it being such a big deal, but it is, after you've been working 10 to 20+ years on a platform/technology and then be faced to switch your expertise and mindset, the feeling tends to become really strong and some people really give up this crazy field and start enojoying a normal life. Would love to hear your stories.

    Read the article

  • AMD E-450 APU with HD-6320 graphics produces jerky videos

    - by user80424
    I try to make videos smooth playing on a Lenovo E325 laptop equipped with AMD E-450 APU. This processor have Ati HD-6320 GPU integrated. I installed ATI proprietary driver (Catalyst 12.04) as described here. Everything went fine and got no errors. However I can not play smooth HD videos. Almost every second frame has been dropped in VLC with hardware acceleration enabled. vainfo shows: libva: VA-API version 0.32.0 Xlib: extension "XFree86-DRI" missing on display ":0". libva: va_getDriverName() returns 0 libva: Trying to open /usr/lib/x86_64-linux-gnu/dri/fglrx_drv_video.so libva: va_openDriver() returns 0 vainfo: VA-API version: 0.32 (libva 1.0.15) vainfo: Driver version: Splitted-Desktop Systems XvBA backend for VA-API - 0.7.8 vainfo: Supported profile and entrypoints VAProfileH264High : VAEntrypointVLD VAProfileVC1Advanced : VAEntrypointVLD fglrxinfo says: display: :0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: AMD Radeon HD 6320 Graphics OpenGL version string: 4.2.11631 Compatibility Profile Context and fgl_glxgears produces ~250fps. Why are HD video frames dropped? CPU doesn't goes above 50% during playback.

    Read the article

  • New Certification Exam: "Oracle Database 12c: SQL Fundamentals" Released (1Z0-061)

    - by Brandye Barrington
    Oracle Certification begins testing this week for the new Oracle Database 12c Administrator Certified Associate (OCA) certification.  Testing for the Oracle Database 12c: SQL Fundamentals (1Z0-061) exam is now underway. Visit pearsonvue.com/oracle and register for exam 1Z0-061. You can get all preparation details, including exam objectives, number of questions, time allotments, and pricing on the Oracle Certification Website. Earning the Oracle Database 12c Administrator Certified Associate (OCA) credential demonstrates that you carry the foundational knowledge and skills needed to administer the Oracle Database, and sets the stage for your future progression to Oracle Database 12c Administrator Certified Professional (OCP). With Oracle Database 12c, you will experience the benefits of an Oracle Database that is re-engineered for Cloud computing. Multitenant architecture brings enterprises unprecedented hardware and software efficiencies, performance and manageability benefits, and fast and efficient Cloud provisioning. Oracle Database 12c certifications emphasize the full set of skills that DBAs need in today's competitive marketplace. Be among the first to obtain this ground breaking new Oracle Certified Associate (OCA) certification by registering for this exam today. QUICK LINKS Certification Path: Oracle Database 12c Administrator Certified Associate (OCA) Certification Exam: Oracle Database 12c: SQL Fundamentals (1Z0-061) Registration: pearsonvue.com/oracle

    Read the article

  • Why does plymouth start so late?

    - by Marky
    It appears that starting with 11.04 Plymouth starts so late in the boot process. Sometimes I only have a split second to see it before it transitions to the login screen. This is the same for 11.10. Compared to 10.04 and 10.10, Plymouth starts only a couple seconds or so after Grub and is very visible within the entire boot process. Is there something that can be done to have Plymouth run earlier? I have experienced this on 3 different machines and on 2 of these machines, I've been running Ubuntu since 10.04. So it's not just my notebook's hardware that is causing this. *One a side note, the boot process is one of the ugliest parts of modern Linux. Ubuntu is not excluded. After almost a decade, (I forget but was bootsplash the first?) this still has only been partly solved. For a couple of seconds ugly text is still seen when shutting down. On several ocassions, the same ugly text is seen when logging out of a session. It's never as smooth as you want it to be. Splash themes are great, don't get me wrong. It's just the transitions that are way off and you get glimpses of what's underneath. I'm used to this but for those new to Ubuntu and coming from Windows. It is a turn off.* pardon the rant. :)

    Read the article

  • How to create shared home directories across multiple computers?

    - by Joe D
    I know there are ways to share a folder across computers making it easy to move files. But I was wondering how one would setup a single login which lets you access the same files regardless of which machine you login on? What I would like is something similar to something you would see in a college campus where students login on machines in the lab and see their files regardless of which machine they use. I know there are server involved here. I have a need to create this on a smaller scale where we have a few computers available (and one of these could act as the server if needed and host the files) that every one shares. Note, the specific install of software might be different on each computer but the login and OS are the same. Since some computers have additional capability that our group members will need to use at rotating schedules (software licenses or hardware components, etc.). I have not done this before, so I would appreciate detailed instructions if possible or a reference to a guide that describes this. Thanks in advance.

    Read the article

  • Announcing Two Papers Addressing the RPAS Fusion Client

    - by Oracle Retail Documentation Team
    Oracle Retail has published two documents to My Oracle Support addressing the Retail Predictive Application Server (RPAS) Fusion Client, a web-based rich client developed using the latest Oracle Application Development Framework (ADF). The Fusion Client provides an enhanced user experience for communicating with the RPAS server. Oracle Retail Predictive Application Server Fusion Client Getting Started Guide Doc ID 1492759.1The Retail Predictive Application Server (RPAS) is a configurable platform that provides capabilities such as a multidimensional database structure, batch and online processing, a configurable user interface, a configurable calculation engine, user security, and utility functions such as importing and exporting, all on a highly scalable technical environment that can be deployed on a variety of hardware. This paper addresses typical questions that arise during setting up and deploying the Fusion Client, provides performance recommendations, and highlights the differences between the Classic Client and the Fusion Client. Oracle Retail RPAS Fusion Client Performance Issue Report Doc ID 1493747.1Performance issues can be frustrating for customers, and Oracle Retail will strive to assist you as you attempt to enhance the performance of your systems. To ensure the timeliest processing of your issue, retailers and partners are encouraged to respond as thoroughly as possible to each question in this document, which can be sent back for analysis by logging a Service Request and following typical Customer Support processes. The sections of the document solicit information about the following: Performance Issue Description Performance Issue Details System Configuration Data Application Configuration Data Performance Log Files

    Read the article

  • Desktop goes un-usable after upgrade to 12.04

    - by Tom Nail
    I have multiple Ubuntu systems connected to a KVM, one of which I recently upgraded from Ubuntu 10 to 12.04. After the upgrade, this system desktop does fine until it is allowed to go to idle (i.e., I've switched to another system on the KVM and it locks it's desktop). When I come back to it, the screen is garbled and paging across at a rate seemingly determined by the mouse. Although no pointer is visible, I can get the screen to stop paging (and just be garbled) by moving the mouse left and right. The paging will slow down and come to a stop, if I can align things carefully enough. This condition persists even when I try to go to a CLI-based login (e.g., CTRL+Alt+F1) and will continue until I reboot the machine. Unfortunately, I'm not very familiar with the Unity desktop, so I don't know where to find things to troubleshoot. A restart of lightdm doesn't change anything, so I'm wondering if this might be more hardware based( although this machine hasn't given me any trouble previously in the same setup). The .xsession-errors file has some issues with compiz, nautilus and GConf listed, but I'm not sure those are actually germane to the issue. Thanks for any help, -=Tom

    Read the article

  • Wireless on ThinkPad Edge E420s

    - by user21820
    I have installed Kubuntu 11.04 (Natty) on my ThinkPad Edge E420 laptop. Unfortunately, the wireless is not working. I have got Windows 7 installed besides Kubuntu, and wireless is working with no problems there, so it has to be problem of the OS. What I tried: I installed the official driver from Realtek RLT8192CE. After reboot the wireless didn't work, but at least the system was able to detect that it is present in the system. However, after executing lscpi -v, under the card's details there was a line "Currently used driver" which said "r8169". Why is this? I did all of this according to a manual on http://www.php-architect.com/blog/2010/05/01/getting-wireless-to-work-on-lenovo-thinkpad-t400-with-ubuntu-10-4-lucid/. There a meany other similar ones, but don't work for me either. My questions are: 1) Is there any way to get this fixed? If yes, how to do so? 2) Do you think OpenSUSE (or any other distro) is better distribution concerning such hardware issues, so should I give it a try? If yes, which distro gives me the best chance?

    Read the article

  • In virtualbox, I can't access the dvd drive to install a guest host

    - by user211062
    I have installed a fresh copy of Ubuntu Server 12.04 and VirtualBox 4.3. I have set up a VM called "MediaServer" and tried to start it. I then get the following error: Cannot open host device '/dev/sr0' for readonly access. Check the permissions of that device ('/bin/ls -l /dev/sr0'): Most probably you need to be member of the device group. Make sure that you logout/login after changing the group settings of the current user (VERR_ACCESS_DENIED) I have looked all over the Internet and have been unable to find a solution. Using Webmin, I tried changing the group settings so that my user name was in the "vboxusers" group, but that did not work either. I tried various other changes in group settings and none of them worked. Also, I tried rebooting the server after the changes and that didn't work either. I have been following a guide on how to set up an Ubuntu server from the website "linuxhomeserverguide.com" and when it came to the section where you could finally set up your first virtual machine, I am stumped. I would really appreciate it if someone could help me. Thanks in advance.

    Read the article

  • accessing files on a shared folder via IIS

    - by Darkcat Studios
    Im not sure if this suits stackexchange, serverfault or here... so i'll go with here for a start. I'm having issues setting up a network share to be accessed by IIS, all I need to do is read/write files on the Other server. We have 2 servers set up (Both 2008 R2 & IIS 7.5), one is the WEB server, which is externally accessible and NOT part of the domain. We also have an Intranet server which has no internet connectivity and is part of the domain. These 2 servers can talk to each other happily, I have the SQL server on the WEB server shared across to the intranet server so that the web content is editable from the intranet. I can share a folder on the web server (say, wwwroot/Images/) and connect to it from the intranet server, even have it as a mapped drive (but i know thats not going to work for IIS to access it), So there seems not to be a connectivity issue. I can also set up a Virtual folder in IIS on the Intranet server - this is where it gets annoying - I cant connect using pass-through authentication because there is no suitable user on the web server (which is not on the domain). If i set up a user on the web server, eg Intranet_USR, and give it appropriate rights to the folder, files and share, i can connect, but only view folder contents in IIS, not read, although that user has read privileges!! Any help much appreciated!

    Read the article

  • slow virtualbox guest

    - by ecoologic
    I run a guest ubuntu 12.04 on a host ubuntu 12.04, with virtual box, and the guest is much, much slower than the host (ALT+TAB costs 4-5secs). I had a look around and I found contradicting opinions on virtualbox vs vmware (free), so I taught to keep the former. Both systems are updated, I installed the additions on the guest and I evenly split memory and video memory (64mb) between guest and host. I am running a toshiba m200 laptop with 4GB ram and shared video memory. The host bios does not include a configuration option for machine virtualization. I have 2 cpus and I can't give them both to the vm. Is there anything I overlooked that could solve my problem? Feel free to ask for more info, and thank you for any help. EDIT Idling with the monitor open the (single) guest cpu never gets below 55% and could raise to 80 - 90% just moving the mouse around, opening ff will cause the monitor to run 100% in the guest, while the host shows that both cpus are evenly working around 60%. My cpu is Intel® Core™2 Duo CPU T5450 @ 1.66GHz × 2. If this is not a configuration problem, does it mean my machine is too weak for virtualization?

    Read the article

< Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >