pass by name - Page 489

WCF MaxReceivedMessageSize property not taking

- by Steve Syfuhs

Searched with no luck... I keep getting The maximum message size quota for incoming messages (65536) has been exceeded. To increase the quota, use the MaxReceivedMessageSize property on the appropriate binding element. It makes sense, so I go into both Server and client config and make the change: Client <system.serviceModel> <bindings> <basicHttpBinding> <binding name="BasicHttpBinding_IFileUpload" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" transferMode="Streamed" messageEncoding="Text" maxBufferSize="65536" maxReceivedMessageSize="67108864"> </binding> </basicHttpBinding> </bindings> <client> <endpoint address="http://localhost/services/FileUpload.svc" binding="basicHttpBinding" bindingConfiguration="BasicHttpBinding_IFileUpload" contract="CFTW.FileUpload.IFileUpload" name="BasicHttpBinding_IFileUpload" /> </client> </system.serviceModel> Server <system.serviceModel> <behaviors> <serviceBehaviors> <behavior name=""> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="false" /> </behavior> </serviceBehaviors> </behaviors> <bindings> <basicHttpBinding> <binding name="BasicHttpBinding_IFileUpload" transferMode="Streamed" messageEncoding="Text" maxBufferSize="67108864" maxBufferPoolSize="67108864" maxReceivedMessageSize="67108864"> </binding> </basicHttpBinding> </bindings> <services> <service name="BasicHttpBinding_IFileUpload"> <endpoint address="~/services/FileUpload.svc" binding="basicHttpBinding" bindingConfiguration="BasicHttpBinding_IFileUpload" contract="CFTW.FileUpload.IFileUpload"></endpoint> </service> </services> <serviceHostingEnvironment multipleSiteBindingsEnabled="true" /> </system.serviceModel> I'm not sure why it's not working (otherwise I'd fix it:)). It's running on .NET 4.0 RC.

Read the article

How can I extract paragaphs and selected lines with Perl?

- by neversaint

I have a text where I need to: to extract the whole paragraph under the section "Aceview summary" until the line that starts with "Please quote" (not to be included). to extract the line that starts with "The closest human gene". to store them into array with two elements. The text looks like this (also on pastebin): AceView: gene:1700049G17Rik, a comprehensive annotation of human, mouse and worm genes with mRNAs or ESTsAceView. <META NAME="title" CONTENT=" AceView: gene:1700049G17Rik a comprehensive annotation of human, mouse and worm genes with mRNAs or EST"> <META NAME="keywords" CONTENT=" AceView, genes, Acembly, AceDB, Homo sapiens, Human, nematode, Worm, Caenorhabditis elegans , WormGenes, WormBase, mouse, mammal, Arabidopsis, gene, alternative splicing variant, structure, sequence, DNA, EST, mRNA, cDNA clone, transcript, transcription, genome, transcriptome, proteome, peptide, GenBank accession, dbest, RefSeq, LocusLink, non-coding, coding, exon, intron, boundary, exon-intron junction, donor, acceptor, 3'UTR, 5'UTR, uORF, poly A, poly-A site, molecular function, protein annotation, isoform, gene family, Pfam, motif ,Blast, Psort, GO, taxonomy, homolog, cellular compartment, disease, illness, phenotype, RNA interference, RNAi, knock out mutant expression, regulation, protein interaction, genetic, map, antisense, trans-splicing, operon, chromosome, domain, selenocysteine, Start, Met, Stop, U12, RNA editing, bibliography"> <META NAME="Description" CONTENT= " AceView offers a comprehensive annotation of human, mouse and nematode genes reconstructed by co-alignment and clustering of all publicly available mRNAs and ESTs on the genome sequence. Our goals are to offer a reliable up-to-date resource on the genes, their functions, alternative variants, expression, regulation and interactions, in the hope to stimulate further validating experiments at the bench "> <meta name="author" content="Danielle Thierry-Mieg and Jean Thierry-Mieg, NCBI/NLM/NIH, [email protected]">  However I am stuck with the following script logic. What's the right way to achieve that? #!/usr/bin/perl -w my $INFILE_file_name = $file; # input file name open ( INFILE, '<', $INFILE_file_name ) or croak "$0 : failed to open input file $INFILE_file_name : $!\n"; my @allsum; while ( <INFILE> ) { chomp; my $line = $_; my @temp1 = (); if ( $line =~ /^ AceView summary/ ) { print "$line\n"; push @temp1, $line; } elsif( $line =~ /Please quote/) { push @allsum, [@temp1]; @temp1 = (); } elsif ($line =~ /The closest human gene/) { push @allsum, $line; } } close ( INFILE ); # close input file # Do something with @allsum There are many files like that I need to process.

Read the article

WCF Webservices and FaultContract - Client's receiving SoapExc insted of FaultException<TDetails>

- by Alessandro Di Lello

Hi All, i'm developing a WCF Webservice and consuming it within a mvc2 application. My problem is that i'm using FaultContracts on my methods with a custom FaultDetail and i'm throwing manyally the faultexception but when the client receive the exception , it receives a normal SoapException instead of my FaultException that i throwed from the service side. Here is some code: Custom Fault Detail Class: [DataContract] public class MyFaultDetails { [DataMember] public string Message { get; set; } } Operation on service contract: [OperationContract] [FaultContract(typeof(MyFaultDetails))] void ThrowException(); Implementation: public void ThrowException() { var details = new MyFaultDetails { Message = "Exception Test" }; throw new FaultException<MyFaultDetails >(details , new FaultReason(details .Message), new FaultCode("MyFault")); } Client side: try { // Obv proxy init etc.. service.ThrowException(); } catch (FaultException<MyFaultDetails> ex) { // stuff } catch (Exception ex) { // stuff } What i expect is to catch the FaultException , instead that catch is skipped and the next catch is taken with an exception of type SoapException. Am i missing something ? i red a lot of threads about using faultcontracts within wcf and what i did seems to be good. I had a look at the wsdl and xsd generated and they look fine. here's a snippet regarding this method: <wsdl:operation name="ThrowException"> <wsdl:input wsaw:Action="http://tempuri.org/IAnyJobService/ThrowException" message="tns:IAnyJobService_ThrowException_InputMessage" /> <wsdl:output wsaw:Action="http://tempuri.org/IAnyJobService/ThrowExceptionResponse" message="tns:IAnyJobService_ThrowException_OutputMessage" /> <wsdl:fault wsaw:Action="http://tempuri.org/IAnyJobService/ThrowExceptionAnyJobServiceFaultExceptionFault" name="AnyJobServiceFaultExceptionFault" message="tns:IAnyJobService_ThrowException_AnyJobServiceFaultExceptionFault_FaultMessage" /> </wsdl:operation> <wsdl:operation name="ThrowException"> <soap:operation soapAction="http://tempuri.org/IAnyJobService/ThrowException" style="document" /> <wsdl:input> <soap:body use="literal" /> </wsdl:input> <wsdl:output> <soap:body use="literal" /> </wsdl:output> <wsdl:fault name="AnyJobServiceFaultExceptionFault"> <soap:fault use="literal" name="AnyJobServiceFaultExceptionFault" namespace="" /> </wsdl:fault> </wsdl:operation> Any help ? Thanks in advance Regards Alessandro

Read the article

.NET 1.0 ThreadPool Question

- by dotnet-practitioner

I am trying to spawn a thread to take care of DoWork task that should take less than 3 seconds. Inside DoWork its taking 15 seconds. I want to abort DoWork and transfer the control back to main thread. I have copied the code as follows and its not working. Instead of aborting DoWork, it still finishes DoWork and then transfers the control back to main thread. What am I doing wrong? class Class1 { /// <summary> /// The main entry point for the application. /// </summary> /// private static System.Threading.ManualResetEvent[] resetEvents; [STAThread] static void Main(string[] args) { resetEvents = new ManualResetEvent[1]; int i = 0; resetEvents[i] = new ManualResetEvent(false); ThreadPool.QueueUserWorkItem(new WaitCallback(DoWork),(object)i); Thread.CurrentThread.Name = "main thread"; Console.WriteLine("[{0}] waiting in the main method", Thread.CurrentThread.Name); DateTime start = DateTime.Now; DateTime end ; TimeSpan span = DateTime.Now.Subtract(start); //abort dowork method if it takes more than 3 seconds //and transfer control to the main thread. do { if (span.Seconds < 3) WaitHandle.WaitAll(resetEvents); else resetEvents[0].Set(); end = DateTime.Now; span = end.Subtract(start); }while (span.Seconds < 2); Console.WriteLine(span.Seconds); Console.WriteLine("[{0}] all done in the main method",Thread.CurrentThread.Name); Console.ReadLine(); } static void DoWork(object o) { int index = (int)o; Thread.CurrentThread.Name = "do work thread"; //simulate heavy duty work. Thread.Sleep(15000); //work is done.. resetEvents[index].Set(); Console.WriteLine("[{0}] do work finished",Thread.CurrentThread.Name); } }

Read the article

Custom ViewEngine problem with ASP.NET MVC

- by mare

In this question jfar answered with his solution the problem is it does not work for me. In the method FindView() I have to somehow check if the View we are requesting is a ViewUserControl. Because otherwise I get an error saying: "A master name cannot be specified when the view is a ViewUserControl." This is my custom view engine code right now: public class PendingViewEngine : VirtualPathProviderViewEngine { public PendingViewEngine() { // This is where we tell MVC where to look for our files. /* {0} = view name or master page name * {1} = controller name */ MasterLocationFormats = new[] {"~/Views/Shared/{0}.master", "~/Views/{0}.master"}; ViewLocationFormats = new[] { "~/Views/{1}/{0}.aspx", "~/Views/Shared/{0}.aspx", "~/Views/Shared/{0}.ascx", "~/Views/{1}/{0}.ascx" }; PartialViewLocationFormats = new[] {"~/Views/{1}/{0}.ascx", "~/Views/Shared/{0}.ascx"}; } protected override IView CreatePartialView(ControllerContext controllerContext, string partialPath) { return new WebFormView(partialPath, ""); } protected override IView CreateView(ControllerContext controllerContext, string viewPath, string masterPath) { return new WebFormView(viewPath, masterPath); } public override ViewEngineResult FindView(ControllerContext controllerContext, string viewName, string masterName, bool useCache) { if (controllerContext.HttpContext.Request.IsAjaxRequest()) return base.FindView(controllerContext, viewName, "Modal", useCache); return base.FindView(controllerContext, viewName, "Site", useCache); } } The above ViewEngine fails on calls like this: <% Html.RenderAction("Display", "WidgetZoneV2", new { zoneslug = "left-default-zone" }); %> As you can see, I am providing Route values to my RenderAction call. The action I am rendering here is this: // Widget zone name is unique // GET: /WidgetZoneV2/{zoneslug} public ActionResult Display(string zoneslug) { zoneslug = Utility.RemoveIllegalCharacters(zoneslug); // Displaying widget zone creates new widget zone if it does not exist yet; so it prepares our page for // dropping of content widgets WidgetZone zone; if (!_repository.IsUniqueSlug(zoneslug)) zone = (WidgetZone) _repository.GetInstance(zoneslug); else { // replace slug with spaces to convert it into Title zone = new WidgetZone {Slug = zoneslug, Title = zoneslug.Replace('-', ' '), WidgetsList = new ContentList()}; _repository.Insert(zone); } ViewData["ContentItemsList"] = _repository.GetContentItems(); return View("WidgetZoneV2", zone); } I cannot use RenderPartial (at least I don't know how) the way I can RenderAction. To my knowledge there is no way to provide RouteValueDictionary to RenderPartial() like the way you can to RenderAction().

Read the article

NSObjectController confusion binding to a class property. Help!

- by scottw

Hi, I'm teaching myself cocoa and enjoying the experience most of the time. I have been struggling all day with a simple problem that google has let me down on. I have read the Cocoa Bindings Program Topics and think I grok it but still can't solve my issue. I have a very simple class called MTSong that has various properties. I have used @synthesize to create getter/setters and can use KVC to change properties. i.e in my app controller the following works: mySong = [[MTSong alloc]init]; [mySong setValue:@"2" forKey:@"version"]; In case I am doing something noddy in my class code MTSong.h is: #import <Foundation/Foundation.h> @interface MTSong : NSObject { NSNumber *version; NSString *name; } @property(readwrite, assign) NSNumber *version; @property(readwrite, assign) NSString *name; @end and MTSong.m is: #import "MTSong.h" @implementation MTSong - (id)init { [super init]; return self; } - (void)dealloc { [super dealloc]; } @synthesize version; @synthesize name; @end In Interface Builder I have a label (NSTextField) that I want to update whenever I use KVC to change the version of the song. I do the following: Drag NSObjectController object into the doc window and in the Inspector-Attributes I set: Mode: Class Class Name: MTSong Add a key called version and another called name Go to Inspector-Bindings-Controller Content Bind To: File's Owner (Not sure this is right...) Model Key Path: version Select the cell of the label and go to Inspector Bind to: Object Controller Controller Key: mySong Model Key Path: version I have attempted changing the Model Key Path in step 2 to "mySong" which makes more sense but the compiler complains. Any suggestions would be greatly appreciated. Scott Update Post Comments I wasn't exposing mySong property so have changed my AppController.h to be: #import <Cocoa/Cocoa.h> @class MTSong; @interface AppController : NSObject { IBOutlet NSButton *start; IBOutlet NSTextField *tf; MTSong *mySong; } -(IBAction)convertFile:(id)sender; @end I suspect File's owner was wrong as I am not using a document based application and I need to bind to the AppController, so step 2 is now: Go to Inspector-Bindings-Controller Content Bind To: App Controller Model Key Path: mySong I needed to change 3. to Select the cell of the label and go to Inspector Bind to: Object Controller Controller Key: selection Model Key Path: version All compiles and is playing nice!

Read the article

How to extract innermost table from html file with the help of the html agility pack ?

- by Harikrishna

I am parsing the tabular information from the html file with the help of the html agility pack. Now I can do it and it works. But when the table what I want to extract is inner most. Or I don't know at which position it is in nested tables.And there can be any number of nested tables and from that I want to extract the information of the table which has column name name,address. Ex. <table> <tr><td>PHONE NO.</td><td>OTHER INFO.</td></tr> <tr><td> <table> <tr><td>AMOUNT</td></tr> <tr><td>50000</td></tr> <tr><td>80000</td></tr> </table> </td></tr> <tr><td> <table> <tr><td> <table> <tr><td> <table> <tr><td> NAME </td><td>ADDRESS</td> <tr><td> ABC </td><td> kfks </td> <tr><td> BCD </td><td> fdsa </td> </table> </tr></td> </table> </td></tr> </table> </td></tr> </table> There are many tables but I want to extract the table which has column name name,address. So what should I do ?

Read the article

can I access a struct inside of a struct without using the dot operator?

- by yan bellavance

I have 2 structures that have 90% of their fields the same. I want to group those fields in a structure but I do not want to use the dot operator to access them. The reason is I already coded with the first structure and have just created the second one. before: struct{ int a; int b; int c; object1 name; } str1; struct{ int a; int b; int c; object2 name; } str2; now I would create a third struct: struct{ int a; int b; int c; } str3; and would change the str1 and atr2 to this: struct{ str3 str; object1 name; } str1; struct { str3 str; object2 name; } str2; Finally I would like to be able to access a,b and c by doing: str1 myStruct; myStruct.a; myStruct.b; myStruct.c; and not: myStruct.str.a; myStruct.str.b; myStruct.str.c; Is there a way to do such a thing. The reason for doing this is I want keep the integrety of the data if chnges to the struct were to occur and to not repeat myself and not have to change my existing code and not have fields nested too deeply. RESOLVED: thx for all your answers. The final way of doing it so that I could use auto-completion also was the following: struct str11 { int a; int b; int c; }; typedef struct str22 : public str11 { QString name; }hi;

Read the article

Spring security ldap authentication with different ldap for authorities

- by wuntee

I am trying to set up an ldap authentication context where the authorities is a separate ldap instance (with the same principal name). I am having trouble setting up the authentication part, the logs dont show any search results for the following context. Can anyone see what I am doing wrong? <beans:bean id="ldapAuthProvider" class="org.springframework.security.ldap.authentication.LdapAuthenticationProvider"> <beans:constructor-arg> <beans:bean class="org.springframework.security.ldap.authentication.BindAuthenticator"> <beans:constructor-arg ref="adContextSource" /> <beans:property name="userSearch"> <beans:bean class="org.springframework.security.ldap.search.FilterBasedLdapUserSearch"> <beans:constructor-arg index="0" value=""/> <beans:constructor-arg index="1" value="(samaccountname={0})"/> <beans:constructor-arg index="2" ref="adContextSource" /> <beans:property name="searchSubtree" value="true" /> <beans:property name="returningAttributes"> <beans:list> <beans:value>DN</beans:value> </beans:list> </beans:property> </beans:bean> </beans:property> </beans:bean> </beans:constructor-arg> <beans:constructor-arg> <beans:bean class="org.springframework.security.ldap.userdetails.DefaultLdapAuthoritiesPopulator"> <beans:constructor-arg ref="cadaContextSource" /> <beans:constructor-arg value="ou=groups" /> <beans:property name="groupRoleAttribute" value="cn" /> </beans:bean> </beans:constructor-arg> </beans:bean> The logs simply show this when trying to authenticate: [DEBUG,UsernamePasswordAuthenticationFilter] Request is to process authentication [DEBUG,ProviderManager] Authentication attempt using org.springframework.security.ldap.authentication.LdapAuthenticationProvider [DEBUG,LdapAuthenticationProvider] Processing authentication request for user: wuntee [DEBUG,FilterBasedLdapUserSearch] Searching for user 'wuntee', with user search [ searchFilter: '(samaccountname={0})', searchBase: '', scope: subtree, searchTimeLimit: 0, derefLinkFlag: false ] [DEBUG,AbstractContextSource] Got Ldap context on server 'ldap://adapps.cable.comcast.com:3268/dc=comcast,dc=com/dc=comcast,dc=com' [DEBUG,XmlWebApplicationContext] Publishing event in Root WebApplicationContext: org.springframework.security.authentication.event.AuthenticationFailureServiceExceptionEvent[source=org.springframework.security.authentication.UsernamePasswordAuthenticationToken@b777617d: Principal: wuntee; Password: [PROTECTED]; Authenticated: false; Details: org.springframework.security.web.authentication.WebAuthenticationDetails@12afc: RemoteIpAddress: 127.0.0.1; SessionId: 191F70ED4E8351F8638868C34C6A076A; Not granted any authorities] [DEBUG,DefaultListableBeanFactory] Returning cached instance of singleton bean 'org.springframework.security.core.session.SessionRegistryImpl#0' [DEBUG,UsernamePasswordAuthenticationFilter] Authentication request failed: org.springframework.security.authentication.AuthenticationServiceException: Failed to parse DN; nested exception is org.springframework.ldap.core.TokenMgrError: Lexical error at line 1, column 21. Encountered: "=" (61), after : "" [DEBUG,UsernamePasswordAuthenticationFilter] Updated SecurityContextHolder to contain null Authentication [DEBUG,UsernamePasswordAuthenticationFilter] Delegating to authentication failure handlerorg.springframework.security.web.authentication.SimpleUrlAuthenticationFailureHandler@28651c

Read the article

WIX will not add HKLM registry setting during Windows 7 install

- by Scott Boettger

Good Morning, I have written a WiX installer that works perfectly with Windows XP but when installing to a Windows 7 box I am running into difficulty with Registry Entries. What I need to do is add a HKLM entry as well as the registry entry for the program to show in the start menu. Here is the code i am using for both types of entry:  <DirectoryRef Id="TARGETDIR"> <Component Id="RegistryEntriesInst" Guid="..."> <RegistryKey Root="HKLM" Key="Software\$(var.Manufacturer)\$(var.ProductName)" Action="createAndRemoveOnUninstall"> <RegistryValue Type="string" Name="installed" Value="true" KeyPath="yes"/> </RegistryKey> </Component> <Component Id="RegistryEntriesVer" Guid="..."> <RegistryKey Root="HKLM" Key="Software\$(var.Manufacturer)\$(var.ProductName)" Action="createAndRemoveOnUninstall"> <RegistryValue Type="string" Name="version" Value="$(var.ProductVersion)" KeyPath="yes"/> </RegistryKey> </Component> </DirectoryRef>  <DirectoryRef Id="ApplicationProgramsFolder"> <Component Id="ApplicationShortcut" Guid="..."> <Shortcut Id="ApplicationStartMenuShortcut" Name="$(var.ProductName)" Description="..." Target="[SERVERLOCATION]$(var.Project.TargetFileName)" WorkingDirectory="SERVERLOCATION"/> <Shortcut Id="UninstallProduct" Name="Uninstall $(var.ProductName)" Description="..." Target="[System64Folder]msiexec.exe" Arguments="/x [ProductCode]"/> <RemoveFolder Id="SERVERLOCATION" On="uninstall"/> <RegistryValue Root="HKCU" Key="Software\$(var.Manufacturer)\$(var.ProductName)" Name="installed" Type="integer" Value="1" KeyPath="yes"/> </Component> </DirectoryRef> Any help/suggestions that can be given will be appreciated. On a side note the registry permissions are the same on the XP and 7 computers. Thanks

Read the article

Using dynamic parameters in email publisher subjectSettings block with CruiseControl.Net

- by Joe

I am trying to get dynamic parameters to be used in the email publisher's subjectSettings block. For example, <project> ... <parameters> <textParameter> <name>version</name> <display>Version to install</display> <description>The version to install.</description> <required>true</required> </textParameter> </parameters> <tasks> ... </tasks> <publishers> .... <email includeDetails="TRUE"> <from>buildmaster</from> <mailhost>localhost</mailhost> <users> <user name="Joe" group="buildmaster" address="jdavies" /> </users> <groups> <group name="buildmaster"> <notifications> <notificationType>Always</notificationType> </notifications> </group> <group name="users"> <notifications> <notificationType>Success</notificationType> <notificationType>Fixed</notificationType> </notifications> </group> </groups> <subjectSettings> <subject buildResult="Success" value="Version ${version} installed." /> <subject buildResult="Fixed" value="Version ${version} fixed and installed." /> </subjectSettings> <modifierNotificationTypes> <notificationType>Success</notificationType> </modifierNotificationTypes> </email> </project> I have tried using ${version} and $[version]. When I use $[version], the entire subject line is empty! Are dynamic parameters supported in this case, and if so, what am I doing wrong?

Read the article

How to make custom WCF error handler return JSON response with non-OK http code?

- by John

I'm implementing a RESTful web service using WCF and the WebHttpBinding. Currently I'm working on the error handling logic, implementing a custom error handler (IErrorHandler); the aim is to have it catch any uncaught exceptions thrown by operations and then return a JSON error object (including say an error code and error message - e.g. { "errorCode": 123, "errorMessage": "bla" }) back to the browser user along with an an HTTP code such as BadRequest, InteralServerError or whatever (anything other than 'OK' really). Here is the code I am using inside the ProvideFault method of my error handler: fault = Message.CreateMessage(version, "", errorObject, new DataContractJsonSerializer(typeof(ErrorMessage))); var wbf = new WebBodyFormatMessageProperty(WebContentFormat.Json); fault.Properties.Add(WebBodyFormatMessageProperty.Name, wbf); var rmp = new HttpResponseMessageProperty(); rmp.StatusCode = System.Net.HttpStatusCode.InternalServerError; rmp.Headers.Add(HttpRequestHeader.ContentType, "application/json"); fault.Properties.Add(HttpResponseMessageProperty.Name, rmp); -- This returns with Content-Type: application/json, however the status code is 'OK' instead of 'InternalServerError'. fault = Message.CreateMessage(version, "", errorObject, new DataContractJsonSerializer(typeof(ErrorMessage))); var wbf = new WebBodyFormatMessageProperty(WebContentFormat.Json); fault.Properties.Add(WebBodyFormatMessageProperty.Name, wbf); var rmp = new HttpResponseMessageProperty(); rmp.StatusCode = System.Net.HttpStatusCode.InternalServerError; //rmp.Headers.Add(HttpRequestHeader.ContentType, "application/json"); fault.Properties.Add(HttpResponseMessageProperty.Name, rmp); -- This returns with the correct status code, however the content-type is now XML. fault = Message.CreateMessage(version, "", errorObject, new DataContractJsonSerializer(typeof(ErrorMessage))); var wbf = new WebBodyFormatMessageProperty(WebContentFormat.Json); fault.Properties.Add(WebBodyFormatMessageProperty.Name, wbf); var response = WebOperationContext.Current.OutgoingResponse; response.ContentType = "application/json"; response.StatusCode = HttpStatusCode.InternalServerError; -- This returns with the correct status code and the correct content-type! The problem is that the http body now has the text 'Failed to load source for: http://localhost:7000/bla..' instead of the actual JSON data.. Any ideas? I'm considering using the last approach and just sticking the JSON in the HTTP StatusMessage header field instead of in the body, but this doesn't seem quite as nice?

Read the article

How to avoid using duplicate savepoint names in nested transactions in nested stored procs?

- by Gary McGill

I have a pattern that I almost always follow, where if I need to wrap up an operation in a transaction, I do this: BEGIN TRANSACTION SAVE TRANSACTION TX -- Stuff IF @error <> 0 ROLLBACK TRANSACTION TX COMMIT TRANSACTION That's served me well enough in the past, but after years of using this pattern (and copy-pasting the above code), I've suddenly discovered a flaw which comes as a complete shock. Quite often, I'll have a stored procedure calling other stored procedures, all of which use this same pattern. What I've discovered (to my cost) is that because I'm using the same savepoint name everywhere, I can get into a situation where my outer transaction is partially committed - precisely the opposite of the atomicity that I'm trying to achieve. I've put together an example that exhibits the problem. This is a single batch (no nested stored procs), and so it looks a little odd in that you probably wouldn't use the same savepoint name twice in the same batch, but my real-world scenario would be too confusing to post. CREATE TABLE Test (test INTEGER NOT NULL) BEGIN TRAN SAVE TRAN TX BEGIN TRAN SAVE TRAN TX INSERT INTO Test(test) VALUES (1) COMMIT TRAN TX BEGIN TRAN SAVE TRAN TX INSERT INTO Test(test) VALUES (2) COMMIT TRAN TX DELETE FROM Test ROLLBACK TRAN TX COMMIT TRAN TX SELECT * FROM Test DROP TABLE Test When I execute this, it lists one record, with value "1". In other words, even though I rolled back my outer transaction, a record was added to the table. What's happening is that the ROLLBACK TRANSACTION TX at the outer level is rolling back as far as the last SAVE TRANSACTION TX at the inner level. Now that I write this all out, I can see the logic behind it: the server is looking back through the log file, treating it as a linear stream of transactions; it doesn't understand the nesting/hierarchy implied by either the nesting of the transactions (or, in my real-world scenario, by the calls to other stored procedures). So, clearly, I need to start using unique savepoint names instead of blindly using "TX" everywhere. But - and this is where I finally get to the point - is there a way to do this in a copy-pastable way so that I can still use the same code everywhere? Can I auto-generate the savepoint name on the fly somehow? Is there a convention or best-practice for doing this sort of thing? It's not exactly hard to come up with a unique name every time you start a transaction (could base it off the SP name, or somesuch), but I do worry that eventually there would be a conflict - and you wouldn't know about it because rather than causing an error it just silently destroys your data... :-(

Read the article

Event not bubbling in some Browsers when clicked on Flash

- by 166_MMX

Environment: Windows 7, Internet Explorer 8, Flash ActiveX 10.1.53.64, wmode=transparent Just wrote a small test page that you can load in IE and Firefox or any other Browser. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Event bubbling test</title> </head> <body onclick="alert('body');" style="margin:0;border-width:0;padding:0;background-color:#00FF00;"> <div onclick="alert('div');" style="margin:0;border-width:0;padding:0;background-color:#FF0000;"> <span onclick="alert('span');" style="margin:0;border-width:0;padding:0;background-color:#0000FF;"> <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://fpdownload.macromedia.com/get/shockwave/cabs/flash/swflash.cab#version=7,0,0,0" width="159" height="91" id="flashAbout_small" align="absmiddle"> <param name="movie" value="http://www.adobe.com/swf/software/flash/about/flashAbout_info_small.swf"/> <param name="quality" value="high"/> <param name="bgcolor" value="#FFFFFF"/> <param name="wmode" value="transparent"/> <embed src="http://www.adobe.com/swf/software/flash/about/flashAbout_info_small.swf" quality="high" bgcolor="#FFFFFF" width="159" height="91" wmode="transparent" name="flashAbout_small" align="absmiddle" type="application/x-shockwave-flash" pluginspage="http://www.adobe.com/go/getflashplayer"/> </object> </span> </div> </body> </html> So clicking any colored shape should produce an alert (except for the green one in IE, not sure why but I hope that's off topic and not related to my issue). Clicking the Flash container in Firefox will work Perfectly fine. You should get alert boxes in this order containing: span, div and body. Flash bubbles the event to the HTML. But this is not happening in IE. So why is Flash in IE not bubbling events to HTML? Edit: As mentioned by Andy E this behavior can also bee seen in Google Chrome which to my knowledge is not using ActiveX to embed the flash movie into the page.

Read the article

Svcutil generating bad config with multiple endpoints

- by vfilby

I have a WCF service that has exposed a soap and an xml endpoint. When I use svcutil to generate the proxy code on the client side the generated configuration contains two endpoints which causes the client to fail. If I edit the web.config file and remove the second endpoint (with the custom binding) all works as expected. Is there a way I can get svcutil to generate a config that just works so that I don't need to hand edit the file everytime? Client-side error: An endpoint configuration section for contract 'MyNamespace.ITestService' could not be loaded because more than one endpoint configuration for that contract was found. Please indicate the preferred endpoint configuration section by name. Svcutil command: svcutil http://api.local/Test.svc /reference:bin\MyNamespace.Interface.dll /config:web.config /mergeConfig /out:"Service References\TestService.cs" /n:*,MyNamespace Generated client config: <system.serviceModel> <bindings> <basicHttpBinding> <binding name="BasicHttpBinding_ITestService" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" allowCookies="false" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard" maxBufferSize="65536" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" transferMode="Buffered" useDefaultWebProxy="true"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <security mode="None"> <transport clientCredentialType="None" proxyCredentialType="None" realm="" /> <message clientCredentialType="UserName" algorithmSuite="Default" /> </security> </binding> </basicHttpBinding> <customBinding> <binding name="CustomBinding_ITestService"> <textMessageEncoding maxReadPoolSize="64" maxWritePoolSize="16" messageVersion="Soap12" writeEncoding="utf-8"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> </textMessageEncoding> </binding> </customBinding> </bindings> <client> <endpoint address="http://api2.local/Test.svc/soap" binding="basicHttpBinding" bindingConfiguration="BasicHttpBinding_ITestService" contract="MyNamespace.ITestService" name="BasicHttpBinding_ITestService" /> <endpoint binding="customBinding" bindingConfiguration="CustomBinding_ITestService" contract="MyNamespace.ITestService" name="CustomBinding_ITestService" /> </client> </system.serviceModel>

Read the article

Ajax call to WCF service returns 12031 ERROR_INTERNET_CONNECTION_RESET on new endpoint

- by cyrix86

I have extended a WCF service with new functionality in the form of a second service contract. The service.cs now implements both contracts. I have added another endpoint to expose the new contract operations. Here is my web.config relating to the service <system.serviceModel> <bindings> <basicHttpBinding> <binding name="BasicHttpBinding" /> </basicHttpBinding> <webHttpBinding> <binding name="XmlHttpBinding"/> </webHttpBinding> </bindings> <services> <service name="MyNamespace.MyService" behaviorConfiguration="MyServiceBehavior">  <endpoint address="xmlHttp1" behaviorConfiguration="XmlHttpBehavior" binding="webHttpBinding" bindingConfiguration="XmlHttpBinding" contract="MyNamespace.IContract1" /> <endpoint address="xmlHttp2" binding="webHttpBinding" behaviorConfiguration="XmlHttpBehavior" bindingConfiguration="XmlHttpBinding" contract="MyNamespace.IContract2" /> <endpoint address="" binding="basicHttpBinding" bindingConfiguration="BasicHttpBinding" contract="MyNamespace.IContract1" /> </service> </services> <behaviors> <serviceBehaviors> <behavior name="MyServiceBehavior">  <serviceMetadata httpGetEnabled="true"/>  <serviceDebug includeExceptionDetailInFaults="false"/> </behavior> </serviceBehaviors> <endpointBehaviors> <behavior name="XmlHttpBehavior"> <webHttp/> </behavior> </endpointBehaviors> </behaviors> </system.serviceModel> From Javascript, calling 'http://server/wcfServiceApp/MyService.svc/xmlHttp1/Method1' still works fine. Calling 'http://server/wcfServiceApp/MyService.svc/xmlHttp2/Method2' returns the 12031 error. There must be something simple I'm not doing, any help is appreciated.

Read the article

Haskell: how to get through 'no instance for' ?

- by artemave

I am learning Haskell. I am on the 8th chapter of this book. The main thing I've learned so far is that Haskell is very unfriendly to me and it bites my ass where possible. Moreover... Heck! Enough mourning, to business. Here is the code: module GlobRegex ( globToRegex, matchesGlob ) where import Text.Regex.Posix import Text.Regex.Posix.String import Text.Regex.Base.RegexLike data CaseOpt = Case | NoCase deriving (Eq) matchesGlob :: String -> String -> CaseOpt -> Bool matchesGlob name pat caseopt = match regex name where regex = case caseopt of NoCase -> makeRegexOpts (defaultCompOpt + compIgnoreCase) defaultExecOpt (globToRegex pat) Case -> makeRegex (globToRegex pat) globToRegex :: String -> String ... And here is how it fails to compile: Prelude Text.Regex.Posix Text.Regex.Base.RegexLike> :load globtoregex\GlobRegex. hs [1 of 1] Compiling GlobRegex ( globtoregex\GlobRegex.hs, interpreted ) globtoregex\GlobRegex.hs:14:31: No instance for (RegexLike regex [Char]) arising from a use of `match' at globtoregex\GlobRegex.hs:14:31-46 Possible fix: add an instance declaration for (RegexLike regex [Char]) In the expression: match regex name In the definition of `matchesGlob': matchesGlob name pat caseopt = match regex name where regex = case caseopt of { NoCase -> makeRegexOpts (defaultCompOpt + compIgnoreCase) defaultExecOpt (globToRegex pat) Case -> makeRegex (globToRegex pat) } globtoregex\GlobRegex.hs:17:23: No instance for (RegexMaker regex CompOption execOpt String) arising from a use of `makeRegex' at globtoregex\GlobRegex.hs:17:23-49 Possible fix: add an instance declaration for (RegexMaker regex CompOption execOpt String) In the expression: makeRegex (globToRegex pat) In a case alternative: Case -> makeRegex (globToRegex pat) In the expression: case caseopt of { NoCase -> makeRegexOpts (defaultCompOpt + compIgnoreCase) defaultExecOpt (globToRegex p at) Case -> makeRegex (globToRegex pat) } Failed, modules loaded: none. To my best understanding, Text.Regex.Posix.String provides instances for RegexLike Regex String and RegexMaker Regex CompOption ExecOption String, so it should work. On the other hand, I can see that regex in the error message is type variable, not a concrete type, so, perhaps not... Anyway, this is where I am stuck. May be there is a common pattern for resolving no instance for type of problems? Or, in Haskell terms, instance of SmartGuess typeclass for no instance for?

Read the article

WPF ListView's GridView item expansion

- by NT_

Is it possible for a WPF ListView that uses a GridView view (ListView.View property) to have one of its items 'expanded' i.e. create some control underneath the item. I cannot simply add another item as it will assume the GridView item template, i.e. appear with columns rather than being a single usable area. This is how my list view currently looks like, it just has two columns: <ListView x:Name="SomeName" Style="{DynamicResource NormalListView}" > <ListView.View> <GridView ColumnHeaderContainerStyle="{DynamicResource NormalListViewHeader}"> <GridViewColumn Width="140" x:Name="Gvc_Name"> <GridViewColumn.CellTemplate> <DataTemplate> <Border Style="{DynamicResource ListViewCellSeparatorBorder}" > <StackPanel Orientation="Vertical" HorizontalAlignment="Stretch" VerticalAlignment="Stretch"> <TextBlock Text="{Binding Path=Name}" FontWeight="Bold" HorizontalAlignment="Left" /> <TextBlock Text="{Binding Path=Type}" HorizontalAlignment="Left" /> </StackPanel> </Border> </DataTemplate> </GridViewColumn.CellTemplate> <Border Style="{DynamicResource ListViewHeaderBorderContainer}"> <TextBlock Style="{DynamicResource ListViewHeaderText}" Text="Name"/> </Border> </GridViewColumn> <GridViewColumn Width="120" x:Name="Gvc_Timestamp"> <GridViewColumn.CellTemplate> <DataTemplate> <Border Style="{DynamicResource ListViewCellSeparatorBorder}"> <StackPanel Orientation="Vertical" HorizontalAlignment="Stretch" VerticalAlignment="Stretch"> <TextBlock Text="{Binding Path=TimestampDate}" HorizontalAlignment="Center" /> <TextBlock Text="{Binding Path=TimestampTime}" FontWeight="Bold" HorizontalAlignment="Center" /> </StackPanel> </Border> </DataTemplate> </GridViewColumn.CellTemplate> <Border Style="{DynamicResource ListViewHeaderBorderContainer}"> <TextBlock Style="{DynamicResource ListViewHeaderText}" Text="Processed"/> </Border> </GridViewColumn> </GridView> </ListView.View> </ListView> Many thanks!

Read the article

h:dataTable alternating rows in JSF2

- by Benchik

Hello. I'm trying to make alternating rows in JSF2 h:dataTable (no richfaces or such) but i get an unexpected result. the table is built but it has a white grid shown (but i didn't specifiy any border) and there's no buttom line under each row. The CSS: .order-table{ border-collapse:collapse; } .order-table-header{ text-align:center; background:none repeat scroll 0 0 #E5E5E5; border-bottom:1px solid #95bce2; padding:16px; } .order-table-odd-row{ text-align:center; background:none repeat scroll 0 0 #FFFFFFF; border-top:1px solid #000000; } .order-table-even-row{ text-align:center; background:none repeat scroll 0 0 #ecf6fc; border-top:1px solid #BBBBBB; } table.order-table tr.over { background-color: #bcd4ec; } The table: <h:dataTable id="personsTable" value="#{personController.allPersons}" var="bean" styleClass="order-table" headerClass="order-table-header" rowClasses="order-table-odd-row,order-table-even-row"> <h:column> <f:facet name="header"> <h:outputText value="First Name" /> </f:facet> <h:outputText value="#{bean.firstName}"/> </h:column> <h:column> <f:facet name="header"> <h:outputText value="Last Name" /> </f:facet> <h:outputText value="#{bean.lastName}"/> </h:column> <h:column> <f:facet name="header"> <h:outputText value="Phone" /> </f:facet> <h:outputText value="#{bean.phone}"/> </h:column> </h:dataTable> and a small JQuery script: <script type="text/javascript"> $(document).ready(function(){ $(".order-table tr").mouseover(function(){ $(this).addClass("over"); }); $(".order-table tr").mouseout(function(){ $(this).removeClass("over"); }); }); </script> The result is (notice the white grid that came from i don't know where. And also no underline which should come from the CSS): http://imagebin.org/132574

Read the article

WPF ComboBox SelectedValue not updating from binding source.

- by vg1890

Here's my binding source object: Public Class MyListObject Private _mylist As New ObservableCollection(Of String) Private _selectedName As String Public Sub New(ByVal nameList As List(Of String), ByVal defaultName As String) For Each name In nameList _mylist.Add(name) Next _selectedName = defaultName End Sub Public ReadOnly Property MyList() As ObservableCollection(Of String) Get Return _mylist End Get End Property Public ReadOnly Property SelectedName() As String Get Return _selectedName End Get End Property End Class Here is my XAML: <Window x:Class="Window1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="Window1" Height="300" Width="300" xmlns:local="clr-namespace:WpfApplication1" > <Window.Resources> <ObjectDataProvider x:Key="MyListObject" ObjectInstance="" /> </Window.Resources> <Grid> <ComboBox Height="23" Margin="24,91,53,0" Name="ComboBox1" VerticalAlignment="Top" SelectedValue="{Binding Path=SelectedName, Source={StaticResource MyListObject}, Mode=OneWay}" ItemsSource="{Binding Path=MyList, Source={StaticResource MyListObject}, Mode=OneWay}" /> <Button Height="23" HorizontalAlignment="Left" Margin="47,0,0,87" Name="btn_List1" VerticalAlignment="Bottom" Width="75">List 1</Button> <Button Height="23" Margin="0,0,75,87" Name="btn_List2" VerticalAlignment="Bottom" HorizontalAlignment="Right" Width="75">List 2</Button> </Grid> </Window> Here's the code-behind: Class Window1 Private obj1 As MyListObject Private obj2 As MyListObject Private odp As ObjectDataProvider Public Sub New() InitializeComponent() Dim namelist1 As New List(Of String) namelist1.Add("Joe") namelist1.Add("Steve") obj1 = New MyListObject(namelist1, "Steve") . Dim namelist2 As New List(Of String) namelist2.Add("Bob") namelist2.Add("Tim") obj2 = New MyListObject(namelist2, "Tim") odp = DirectCast(Me.FindResource("MyListObject"), ObjectDataProvider) odp.ObjectInstance = obj1 End Sub Private Sub btn_List1_Click(ByVal sender As System.Object, ByVal e As System.Windows.RoutedEventArgs) Handles btn_List1.Click odp.ObjectInstance = obj1 End Sub Private Sub btn_List2_Click(ByVal sender As System.Object, ByVal e As System.Windows.RoutedEventArgs) Handles btn_List2.Click odp.ObjectInstance = obj2 End Sub End Class When the Window first loads, the bindings hook up fine. The ComboBox contains the names "Joe" and "Steve" and "Steve" is selected by default. However, when I click a button to switch the ObjectInstance to obj2, the ComboBox ItemsSource gets populated correctly in the dropdown, but the SelectedValue is set to Nothing instead of being equal to obj2.SelectedName. Thanks in advance!

Read the article

Calling Save on a Configuration obj with a custom sectiongroup of type NameValueSectionHandler

- by Allen

I've got aConfiguration object that I can easily read and write settings from and call Save(ConfigurationSaveMode.Minimal, true) on and that typically works just fine. However, I now have a config file that has a custom sectionGroup defined of type System.Configuration.NameValueSectionHandler (I didn't write that part and I can't change it). Now when I call the Save method, it throws a TypeLoadException Message: Type System.Configuration.NameValueSectionHandler does not inherit from System.Configuration.ConfigurationSectionGroup. Callstack: at System.Configuration.TypeUtil.VerifyAssignableType (Type baseType, Type type, Boolean throwOnError) at System.Configuration.TypeUtil.GetConstructorWithReflectionPermission (Type type, Type baseType, Boolean throwOnError) at System.Configuration.MgmtConfigurationRecord.CreateSectionGroupFactory (FactoryRecord factoryRecord) at System.Configuration.MgmtConfigurationRecord.EnsureSectionGroupFactory (FactoryRecord factoryRecord) at System.Configuration.MgmtConfigurationRecord.GetSectionGroup (String configKey) at System.Configuration.ConfigurationSectionGroupCollection.Get (String name) at System.Configuration.ConfigurationSectionGroupCollection. <GetEnumerator>d__0.MoveNext() at System.Configuration.Configuration.ForceGroupsRecursive (ConfigurationSectionGroup group) at System.Configuration.Configuration.SaveAsImpl (String filename, ConfigurationSaveMode saveMode, Boolean forceSaveAll) at System.Configuration.Configuration.Save (ConfigurationSaveMode saveMode, Boolean forceSaveAll) at MyCompany.MyProduct.blah.blah.Save () in C:\\projects\\blah\\blah\\blah.cs:line blah For reference, the configuration goes like so <configuration> <configSections> ... normal sections here that work just fine, followed by ... <sectionGroup name="threadSettings" type="System.Configuration.NameValueSectionHandler"> <section name="T1" type="System.Configuration.DictionarySectionHandler"/> <section name="T2" type="System.Configuration.DictionarySectionHandler"/> <section name="T3" type="System.Configuration.DictionarySectionHandler"/> </sectionGroup> </configSections> <applicationSettings /> <threadSettings> <T1> <add key="key-here" value="value-here"/> </T1> ... T2 and T3 here as well, thats not interesting ... </threadSettings> </configuration> If I remove the actual sections and the definition for the custom section groups, I am able to read / write settings just fine and even call Save just fine. Obviously the custom section groups could be setup a little nicer but I can't fix that so I'm wondering: Is it possible to get the Configuration object to save if it has custom sectionGroups of the NameValueSectionHandler type

Read the article

Fluent | Nhibernate multiple inheritance mapping?

- by Broken Pipe

I'm trying to map this classes: public interface IBusinessObject { Guid Id { get; set; } } public class Product { public virtual Guid Id { get; set; } public virtual int ProductTypeId { get; set; } } public class ProductWeSell : Product, IBusinessObject { } public class ProductWeDontSell : Product { } Using this Fluent mapping code: public class IBusinessObjectMap : ClassMap<IBusinessObject> { public IBusinessObjectMap() { Id(t => t.Id).GeneratedBy.Guid(); Table("BusinessObject"); } } public class ProductMap : ClassMap<Product> { public ProductMap() { Id(t => t.Id); DiscriminateSubClassesOnColumn("ProductTypeId", "null").Nullable(); } } public class ProductWeSellMap : SubclassMap<ProductWeSell> { public ProductWeSellMap() { DiscriminatorValue(1); KeyColumn("Id"); } } public class ProductWeDontSellMap : SubclassMap<ProductWeDontSell> { public ProductWeDontSellMap() { DiscriminatorValue(2); KeyColumn("Id"); } } But I get {"Duplicate class/entity mapping ProductWeSell"} error. And if we take a look at generated HBM, indeed it's duplicated, but i have no idea how to write this mapping without duplicating it if it's possible at all. Produced hbm: <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2"> <class xmlns="urn:nhibernate-mapping-2.2" name="IBusinessObject" table="BusinessObject"> <joined-subclass name="ProductWeSell" table="ProductWeSell"/> </class> </hibernate-mapping> <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2"> <class xmlns="urn:nhibernate-mapping-2.2" discriminator-value="null" name="Product" table="Product"> <discriminator type="String"> <column name="ProductTypeId" not-null="false" /> </discriminator> <subclass name="ProductWeDontSell" discriminator-value="2" /> <subclass name="ProductWeSell" discriminator-value="1" /> </class> </hibernate-mapping> So far I was unable to figure out how to map this using fluent Nhibernate (i haven't tried mapping this using hmb files). Any help appreciated Fluent or HBM files. The thing I'm trying to solve look identical to this topic: NHibernate inheritance mapping question

Read the article

Mechanize Javascript ...

- by Horace Ho

I try to submit a form by Mechanize, however, I am not sure how to add necessary form valuables which are done by some Javascript. Since Mechanize does not support Javascript yet, and so I try to add the variables manually. The form source: <form name="aspnetForm" method="post" action="list.aspx" language="javascript" onkeypress="javascript:return WebForm_FireDefaultButton(event, '_ctl0_ContentPlaceHolder1_cmdSearch')" id="aspnetForm"> <input type="hidden" name="__EVENTTARGET" id="__EVENTTARGET" value="" /> <input type="hidden" name="__EVENTARGUMENT" id="__EVENTARGUMENT" value="" /> <input type="hidden" name="__LASTFOCUS" id="__LASTFOCUS" value="" /> <input type="hidden" name="__VIEWSTATE" id="__VIEWSTATE" value="/..." /> <script type="text/javascript">  </script> <script language="javascript">  </script> ... <a href="JavaScript:_linkedClicked('123456','_ctl0:ContentPlaceHolder1:Link', '',0,1);">123456</a> ... </form> I tried to add the 2 variables: page.forms.first['__EVENTTARGET'] = '_ctl0:ContentPlaceHolder1:Link' page.forms.first['__EVENTARUGMENT'] = '123456' and submit the form: page.forms.first.click_button(page.forms.first.buttons.first) The result returned only (re)show the current list of links as if I have not clicked on any of the links. Any help will be appreciated. Thanks!

Read the article

markitup wysiwyg with a standard HTML form

- by Chris

Hi, I'm trying to use the markitup editor on my site and I'm having a problem trying to figure out what I need to do to submit the text area to my server side script. I'm guessing there is something simple that needs to be done but my lack of JS/JQuery knowledge is making it really hard to find a answer The editor works fine, I just want to use my own form and submit button with it, however when I try to submit the form I don't get any of the textarea data in my script. Any idea what I need to do? This is the min that works (before submit) In the Head of my HTML <script type="text/javascript" >  </script> And the body: <form id="postpreview" name="newpost" action="/someurl" method="POST" /> <input type="hidden" name="key1" value="val1" /> <input type="hidden" name="key2" value="val2" /> <textarea name="text" id="markItUp"></textarea> <input id="SubmitPost" type="image" value="Continue" name="Doit" class="preview" src="/img/somimage" /> </form> As I said, everything prior to the submit works but once I submit I don't get anything for the form data element "text". I tried doing this in the head: <script type="text/javascript" >  </script> I've also tried: <script type="text/javascript" >  </script> And I have no luck - the last attempt above just disabled the form (so clicking on the submit or preview buttons did nothing). Any ideas? I guessing its really simple to use my own form but I have no clue how to do it. TIA!

Read the article

PHP: POST Request to ASP.NET website results in 500 server error when html tags included

- by RyanJD

My situation: I need to send text to an ASP.NET web service using POST. The entire page there is a form: <form name="aspnetForm" method="post" action="Discussion.aspx?classroom=lG39il1cotOAGJwiNvmQlIPfwmjikD%2fAHLhjjGInAZQ%3d&Page=Posts&ID=794239&Sort=&SortOrder=" id="aspnetForm"> So, I figured if I sent a POST request to this form with the correct inputs it would work. And, to an extent, it has. The form inputs are as follows: <input type="hidden" name="__EVENTTARGET" id="__EVENTTARGET" value="" /> <input type="hidden" name="__EVENTARGUMENT" id="__EVENTARGUMENT" value="" /> <input type="hidden" name="__VIEWSTATE" id="__VIEWSTATE" value="/wEPDw..." /> <input type="hidden" name="__EVENTVALIDATION" id="__EVENTVALIDATION" value="/wEWYQLrt..." /> And a bunch of other inputs. The code I have used is as follows: // grab form info $inputs = extract_form_inputs($discussion['body']); $inputs['__EVENTTARGET'] = 'ctl00$cphMain$ctl01$btnSubmit'; $inputs['ctl00$cphMain$ctl01$tbNickname'] = "Your Instructor"; $inputs['ctl00$cphMain$ctl01$reMessage'] = $message; // submit form $r = request_send($discussion['url'], $inputs); extract_form_inputs does exactly that. $discussion['body'] is the content of the page. $discussion['url'] is the URL of the page. request_send has two arguments: ($url, $post_array). It performs rawurlencode on each element of the array and joins them up as keypairs, in the same way as http_build_query. The request is url encoded properly, sent to the correct page, and works fine until I insert html tags. I have checked - the 'greater than' and 'less than' symbols ('<' and '') are url-encoded properly. However, the server responds with a 500 error. It accepts any other text. Has anyone else come across this sort of problem? Is there some setting on an ASP.NET server that denies html? I can't see this being the case - there is a rich text editor on the website that I am sending requests to. This text editor performs the same request as I am, only I am doing it remotely. The rich text editor sends html to the form - I have checked that, too, using javascript. Note: I do not have the power to modify the ASP.NET server.

Search Results

Search found 53492 results on 2140 pages for 'pass by name'.

Page 489/2140 | < Previous Page | 485 486 487 488 489 490 491 492 493 494 495 496 | Next Page >

- by Steve Syfuhs

- by neversaint

- by Alessandro Di Lello

- by dotnet-practitioner

- by mare

- by scottw

- by Harikrishna

- by yan bellavance

- by wuntee

- by Scott Boettger

- by Joe

- by John

- by Gary McGill

- by 166_MMX

- by vfilby

- by cyrix86

- by artemave

- by NT_

- by Benchik

- by vg1890

- by Allen

- by Broken Pipe

- by Horace Ho

- by Chris

- by RyanJD

< Previous Page | 485 486 487 488 489 490 491 492 493 494 495 496 | Next Page >