Search Results

Search found 2891 results on 116 pages for 'amazon ecs'.

Page 49/116 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

  • EC2 Ubuntu - Force instance to use internal IP

    - by Peter
    I've just set up a micro instance on EC2 (AMI ID ami-e59ca991). I had hoped to avoid charges for a year as my usage falls well within the bound of the free tier. I have been charged $0.01 for "regional data transfer". I read here that this is because my instance is talking to its self via it's external IP address. From what I've Googled it looks like you can stop the charges by making sure that the instance uses its internal IP address. However, when I ping the hostname of my instance internally (via an ssh session) it resolves to the instances internal IP address. How can I configure my instance so that I do not get these charges? Is it as simple as adding a line to my hosts file? Additionally, is this the real reason for the charge? I'm concerned that I've misunderstood the pricing somewhere. I have Apace and MySQL (with phpmyadmin) running on the machine - could I be being charged for data transfer associated with these (I have only one flat HTML page and I have only logged in via phpmyadmin - I have no data in my database). Edit: Additionally, my user account on MySQL was declared as: grant all privileges on *.* to 'peter'@'localhost'; Should I have instead used the internal hostname for the instance? grant all privileges on *.* to '[email protected]'; Cheers, Pete

    Read the article

  • s3cmd fails too many times

    - by alfish
    It used to be my favorite backup transport agent but now I frequently get this result from s3cmd on the very same Ubuntu server/network: root@server:/home/backups# s3cmd put bkup.tgz s3://mybucket/ bkup.tgz -> s3://mybucket/bkup.tgz [1 of 1] 36864 of 2711541519 0% in 1s 20.95 kB/s failed WARNING: Upload failed: /bkup.tgz ([Errno 32] Broken pipe) WARNING: Retrying on lower speed (throttle=0.00) WARNING: Waiting 3 sec... bkup.tgz -> s3://mybucket/bkup.tgz [1 of 1] 36864 of 2711541519 0% in 1s 23.96 kB/s failed WARNING: Upload failed: /bkup.tgz ([Errno 32] Broken pipe) WARNING: Retrying on lower speed (throttle=0.01) WARNING: Waiting 6 sec... bkup.tgz -> s3://mybucket/bkup.tgz [1 of 1] 28672 of 2711541519 0% in 1s 18.71 kB/s failed WARNING: Upload failed: /bkup.tgz ([Errno 32] Broken pipe) WARNING: Retrying on lower speed (throttle=0.05) WARNING: Waiting 9 sec... bkup.tgz -> s3://mybucket/bkup.tgz [1 of 1] 28672 of 2711541519 0% in 1s 18.86 kB/s failed WARNING: Upload failed: /bkup.tgz ([Errno 32] Broken pipe) WARNING: Retrying on lower speed (throttle=0.25) WARNING: Waiting 12 sec... bkup.tgz -> s3://mybucket/bkup.tgz [1 of 1] 28672 of 2711541519 0% in 1s 15.79 kB/s failed WARNING: Upload failed: /bkup.tgz ([Errno 32] Broken pipe) WARNING: Retrying on lower speed (throttle=1.25) WARNING: Waiting 15 sec... bkup.tgz -> s3://mybucket/bkup.tgz [1 of 1] 12288 of 2711541519 0% in 2s 4.78 kB/s failed ERROR: Upload of 'bkup.tgz' failed too many times. Skipping that file. This happens even for files as small as 100MB, so I suppose it's not a size issue. It also happens when I use put with --acl-private flag (s3cmd version 1.0.1) I appreciate if you suggest some solution or a lightweight alternative to s3cmd. Thanks

    Read the article

  • Unexpected behaviour when dynamically add node in HAproxy server

    - by Anand Soni
    I wanted to use HAProxy for my web app for load balancing purpose. I am trying to add a new rabbitmq node dynamically in HAProxy server using command : haproxy -p /var/run/haproxy.pid -sf $(cat /var/run/haproxy.pid). I am doing tcp connection mode with leastconn balance algorithm in load balancing. What is expected is when there is 3 connection in one rabbitmq, I add a new rabbit server in HAProxy server. so the next connection would pass to 2nd rabbitmq server which is not happening in my case. It distributes the connection in haphazardly manner. Here is my config file: defaults log global mode http option httplog option dontlognull retries 3 option redispatch maxconn 2000 contimeout 5000 clitimeout 5000 srvtimeout 5000 listen rabbitmq 0.0.0.0:5672 mode tcp stats enable balance leastconn option tcplog server rabbit01 xx.xx.xx.xx:5672 check server rabbit02 xx.xx.xx.xx:5672 check listen tomcatq 0.0.0.0:80 mode http stats enable balance roundrobin stats refresh 10s stats refresh 10s stats uri /lb?stats stats auth admin:admin option httplog What is the problem causing this behavior? Any suggestion will appreciated.

    Read the article

  • Why the system information message when accessing an Ubuntu server doesn't match free -m?

    - by Andres
    Each time I SSH into my AWS Ubuntu servers I see a system information message, showing load, memory usage and packages available to install, like this: Welcome to Ubuntu 12.04.3 LTS (GNU/Linux 3.2.0-51-virtual x86_64) * Documentation: https://help.ubuntu.com/ System information as of Sun Nov 10 18:06:43 EST 2013 System load: 0.08 Processes: 127 Usage of /: 4.9% of 98.43GB Users logged in: 1 Memory usage: 69% IP address for eth0: 10.236.136.233 Swap usage: 100% Graph this data and manage this system at https://landscape.canonical.com/ 13 packages can be updated. 0 updates are security updates. Get cloud support with Ubuntu Advantage Cloud Guest http://www.ubuntu.com/business/services/cloud Use Juju to deploy your cloud instances and workloads. https://juju.ubuntu.com/#cloud-precise *** /dev/xvda1 will be checked for errors at next reboot *** *** System restart required *** My question is about the memory percentage shown. In this case, it's showing a 69% of memory usage, but since the swap usage was 100% I checked it by myself. So when I run free -m I get this: total used free shared buffers cached Mem: 1652 1635 17 0 4 29 -/+ buffers/cache: 1601 51 Swap: 895 895 0 And that's of course closer to 100% than to 69%

    Read the article

  • Monit won't run

    - by Yaniro
    I have two identical EC2 instances (the second is a replica of the first), running Gentoo. The first instance has monit running which monitors a single process and some system resources and functions great. In the second instance, monit runs but quits right away. The configuration is similar on both instances so are the versions of monit. monit.log shows: [GMT Oct 3 08:36:41] info : monit daemon with PID 5 awakened Final lines on strace monit show: write(2, "monit daemon with PID 5 awakened"..., 33monit daemon with PID 5 awakened ) = 33 time(NULL) = 1349252827 open("/etc/localtime", O_RDONLY) = 4 fstat64(4, {st_mode=S_IFREG|0644, st_size=118, ...}) = 0 fstat64(4, {st_mode=S_IFREG|0644, st_size=118, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb773a000 read(4, "TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\1\0\0\0\1\0\0\0\0"..., 4096) = 118 _llseek(4, -6, [112], SEEK_CUR) = 0 read(4, "\nGMT0\n", 4096) = 6 close(4) = 0 munmap(0xb773a000, 4096) = 0 write(3, "[GMT Oct 3 08:27:07] info :"..., 33) = 33 write(3, "monit daemon with PID 5 awakened"..., 33) = 33 waitpid(-1, NULL, WNOHANG) = -1 ECHILD (No child processes) close(3) = 0 exit_group(0) = ? No core dumps (ulimit -c shows unlimited) monit -v shows: monit: Debug: Adding host allow 'localhost' monit: Debug: Skipping redundant host 'localhost' monit: Debug: Skipping redundant host 'localhost' monit: Debug: Adding credentials for user 'xxxx'. Runtime constants: Control file = /etc/monitrc Log file = /var/log/monit/monit.log Pid file = /var/run/monit.pid Id file = /var/run/monit.pid Debug = True Log = True Use syslog = False Is Daemon = True Use process engine = True Poll time = 30 seconds with start delay 0 seconds Expect buffer = 256 bytes Event queue = base directory /var/monit with 100 slots Mail server(s) = xx.xxx.xx.xxx with timeout 30 seconds Mail from = (not defined) Mail subject = (not defined) Mail message = (not defined) Start monit httpd = True httpd bind address = Any/All httpd portnumber = 2812 httpd signature = True Use ssl encryption = False httpd auth. style = Basic Authentication and Host/Net allow list Alert mail to = [email protected] Alert on = All events The service list contains the following entries: System Name = xxxx Monitoring mode = active CPU wait limit = if greater than 20.0% 1 times within 1 cycle(s) then alert else if succeeded 1 times within 1 cycle(s) then alert CPU system limit = if greater than 30.0% 1 times within 1 cycle(s) then alert else if succeeded 1 times within 1 cycle(s) then alert CPU user limit = if greater than 70.0% 1 times within 1 cycle(s) then alert else if succeeded 1 times within 1 cycle(s) then alert Swap usage limit = if greater than 25.0% 1 times within 1 cycle(s) then alert else if succeeded 1 times within 1 cycle(s) then alert Memory usage limit = if greater than 75.0% 1 times within 1 cycle(s) then alert else if succeeded 1 times within 1 cycle(s) then alert Load avg. (5min) = if greater than 2.0 1 times within 1 cycle(s) then alert else if succeeded 1 times within 1 cycle(s) then alert Load avg. (1min) = if greater than 4.0 1 times within 1 cycle(s) then alert else if succeeded 1 times within 1 cycle(s) then alert Process Name = xxxx Group = server Pid file = /var/run/xxxx.pid Monitoring mode = active Start program = '/etc/init.d/xxxx restart' timeout 20 second(s) Stop program = '/etc/init.d/xxxx stop' timeout 30 second(s) Existence = if does not exist 1 times within 1 cycle(s) then restart else if succeeded 1 times within 1 cycle(s) then alert Pid = if changed 1 times within 1 cycle(s) then alert Ppid = if changed 1 times within 1 cycle(s) then alert Timeout = If restarted 3 times within 5 cycle(s) then unmonitor Alert mail to = [email protected] Alert on = All events Alert mail to = [email protected] Alert on = All events ------------------------------------------------------------------------------- monit daemon with PID 5 awakened Ran emerge --sync before emerge -va monit which installed monit v5.3.2. When that didn't work i've downloaded v5.5 from their website and compiled from source which did not work either.

    Read the article

  • Linux Virtualization Options on EC2

    - by recampbell
    I need to subdivide EC2 (or perhaps other cloud provider) instances. I know you cannot run a full virtualization stack on another. For instance a Xen guest cannot host a VirtualBox guest. So this means I am left with operating system-level virtualization. EC2 kernels are only publishable by select vendors, so you cannot upload the custom kernels required for OpenVZ or Vserver. For Linux, I think this leaves me with lxc (on Ubuntu 9.10), User Mode Linux, or qemu. I'm having a hard time finding comparisons between them. Performance is a concern, as is the ability to provide SMP to the guests. I would also like to use COW/sparse roots to reduce guest provisioning. My question is, what are the trade-offs between these options?

    Read the article

  • Can't launch glassfish on ec2 - can't open port

    - by orange80
    I'm trying to start glassfish on an EBS-based AMI of Ubuntu 10.04 64-bit. I have used glassfish on non-ec2 servers with no problems, but on ec2 I get this message: $ sudo -u glassfish bin/asadmin start-domain domain1 There is a process already using the admin port 4848 -- it probably is another instance of a GlassFish server. Command start-domain failed. I know that ec2 has requires that firewall rules be modified using ec2-authorize to let outside traffic thru the firewall, as I had to do to make ssh work. This still doesn't explain the port error when all I'm trying to do is start glassfish so I can try $ wget localhost:8080and make sure it's working. This is very frustrating and I'd really appreciate any help. Thanks. FINAL UPDATE: Sorry if you came here looking for answers. I never figured out what was causing the problem. I created another fresh instance, installed the same stuff, and Glassfish worked perfectly. Something obviously got boned during installation, but I have no idea what. I guess it will remain a mystery. UPDATE: Here's what I get from netstat: # netstat -nuptl Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 462/sshd tcp6 0 0 :::22 :::* LISTEN 462/sshd udp 0 0 0.0.0.0:5353 0.0.0.0:* 483/avahi-daemon: r udp 0 0 0.0.0.0:1194 0.0.0.0:* 589/openvpn udp 0 0 0.0.0.0:37940 0.0.0.0:* 483/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 377/dhclient3 UPDATE: One more thing... I know that the "net.ipv6.bindv6only" kernel option can cause problems with java networking, so I did set this: # sysctl -w net.ipv6.bindv6only=0 UPDATE: I also verified that it has nothing at all to do with the port number (4848). As you can see here, when I changed the admin-listener port in domain.xml to 4949, I get a similar message: # sudo -u glassfish bin/asadmin start-domain domain1 There is a process already using the admin port 4949 -- it probably is another instance of a GlassFish server. Command start-domain failed. UPDATE: Here are the contents of /etc/hosts: 127.0.0.1 localhost # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts I should mention that I have another Ubuntu Lucid 10.04 64-bit slice that is NOT hosted on ec2, and set it up the exact same way with no problems whatsoever. Also server.log doesn't offer much insight either: # cat ./server.log Nov 20, 2010 8:46:49 AM com.sun.enterprise.admin.launcher.GFLauncherLogger info INFO: JVM invocation command line: /usr/lib/jvm/java-6-sun-1.6.0.22/bin/java -cp /opt/glassfishv3/glassfish/modules/glassfish.jar -XX:+UnlockDiagnosticVMOptions -XX:MaxPermSize=192m -XX:NewRatio=2 -XX:+LogVMOutput -XX:LogFile=/opt/glassfishv3/glassfish/domains/domain1/logs/jvm.log -Xmx512m -client -javaagent:/opt/glassfishv3/glassfish/lib/monitor/btrace-agent.jar=unsafe=true,noServer=true -Dosgi.shell.telnet.maxconn=1 -Djdbc.drivers=org.apache.derby.jdbc.ClientDriver -Dfelix.fileinstall.dir=/opt/glassfishv3/glassfish/modules/autostart/ -Djavax.net.ssl.keyStore=/opt/glassfishv3/glassfish/domains/domain1/config/keystore.jks -Dosgi.shell.telnet.port=6666 -Djava.security.policy=/opt/glassfishv3/glassfish/domains/domain1/config/server.policy -Dfelix.fileinstall.poll=5000 -Dcom.sun.aas.instanceRoot=/opt/glassfishv3/glassfish/domains/domain1 -Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory -Dosgi.shell.telnet.ip=127.0.0.1 -Djava.endorsed.dirs=/opt/glassfishv3/glassfish/modules/endorsed:/opt/glassfishv3/glassfish/lib/endorsed -Dcom.sun.aas.installRoot=/opt/glassfishv3/glassfish -Djava.ext.dirs=/usr/lib/jvm/java-6-sun-1.6.0.22/lib/ext:/usr/lib/jvm/java-6-sun-1.6.0.22/jre/lib/ext:/opt/glassfishv3/glassfish/domains/domain1/lib/ext -Dfelix.fileinstall.bundles.new.start=true -Djavax.net.ssl.trustStore=/opt/glassfishv3/glassfish/domains/domain1/config/cacerts.jks -Dcom.sun.enterprise.security.httpsOutboundKeyAlias=s1as -Djava.security.auth.login.config=/opt/glassfishv3/glassfish/domains/domain1/config/login.conf -DANTLR_USE_DIRECT_CLASS_LOADING=true -Dfelix.fileinstall.debug=1 -Dorg.glassfish.web.rfc2109_cookie_names_enforced=false -Djava.library.path=/opt/glassfishv3/glassfish/lib:/usr/lib/jvm/java-6-sun-1.6.0.22/jre/lib/amd64/server:/usr/lib/jvm/java-6-sun-1.6.0.22/jre/lib/amd64:/usr/lib/jvm/java-6-sun-1.6.0.22/lib/amd64:/usr/java/packages/lib/amd64:/usr/lib64:/lib64:/lib:/usr/lib com.sun.enterprise.glassfish.bootstrap.ASMain -domainname domain1 -asadmin-args start-domain,,,domain1 -instancename server -verbose false -debug false -asadmin-classpath /opt/glassfishv3/glassfish/modules/admin-cli.jar -asadmin-classname com.sun.enterprise.admin.cli.AsadminMain -upgrade false -domaindir /opt/glassfishv3/glassfish/domains/domain1 -read-stdin true

    Read the article

  • puppet cert mismatch in ec2

    - by Stick
    I'm setting up a puppetmaster (2.7.6) in ec2 via gems (on rhel6) and I'm running into problems with the cert names and getting the master able to talk to itself. my puppet.conf looks like this: [main] logdir = /var/log/puppet rundir = /var/run/puppet vardir = /var/lib/puppet ssldir = $vardir/ssl pluginsync = true environment = production report = true certname = master When I start the puppetmaster process the ssl directory looks like: ssl/private_keys/master.pem ssl/crl.pem ssl/public_keys/master.pem ssl/ca/ca_crl.pem ssl/ca/signed/master.pem ssl/ca/ca_crt.pem ssl/ca/ca_pub.pem ssl/ca/ca_key.pem ssl/certs/ca.pem ssl/certs/master.pem I have an /etc/hosts entry on the box to point the 'puppet' hostname to localhost so that I don't have to change the 'server' option. When I run the agent I get the following: # puppet agent --test info: Retrieving plugin err: /File[/var/lib/puppet/lib]: Failed to generate additional resources using 'eval_generate: Server hostname 'puppet' did not match server certificate; expected master err: /File[/var/lib/puppet/lib]: Could not evaluate: Server hostname 'puppet' did not match server certificate; expected master Could not retrieve file metadata for puppet://puppet/plugins: Server hostname 'puppet' did not match server certificate; expected master err: Could not retrieve catalog from remote server: Server hostname 'puppet' did not match server certificate; expected master warning: Not using cache on failed catalog err: Could not retrieve catalog; skipping run err: Could not send report: Server hostname 'puppet' did not match server certificate; expected master If I specify the certname as the server (with corresponding hosts entry) I get: # puppet agent --test --server master info: Retrieving plugin err: /File[/var/lib/puppet/lib]: Could not evaluate: Could not retrieve information from environment production source(s) puppet://master/plugins info: Caching catalog for master info: Applying configuration version '1321805956' notice: Finished catalog run in 0.05 seconds Which is success of a sort, that source error will bite me later when I'm applying manifests. I've tried a couple of other variations with using the ec2 private hostname and gotten mixed results. I'd like to avoid setting server = 'x' and use dns/hosts to control what 'puppet' resolves to in order to decide which server (plays easier with availability zones, etc)

    Read the article

  • How to get nginx to serve up on an elastic IP

    - by geekbri
    I have an EC2 instance which is serving up PHP pages with nginx and php-fpm. This works perfectly fine when accessed through the public DNS for the instance. However if I try to access the site with the Elastic IP which is bound to it, it serves up a generic "Welcome to nginx" page, even though in my server block i have listen 80 (which i thought listened on all incoming IPs on port 80). Here is my nginx config. server { listen 80; access_log /var/log/nginx/access.log; root "/var/www/clipperz/"; index index.html index.php; # Default location location / { try_files $uri $uri/ index.html; } # Parse all .php file in the $document_root directory location ~ .php$ { include fastcgi_params; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } }

    Read the article

  • Unable to SSH to EC2

    - by Walker
    I downloaded the cert-xxx.pem and pk-xxx.pem files and also the keypair.pem and moved it all to the /.ssh folder on my Ubuntu client machine. this is what I get when I try to SSH with -v at the end debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /root/.ssh/identity debug1: Trying private key: /root/.ssh/id_rsa debug1: Trying private key: /root/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey). I am new to administering servers and I want to know if I should be trying to convert the pem files to id_rsa and id_dsa. I am not really sure if that is possible but I don't know how else to get the id_rsa, id_dsa from those pem files or if there is any work around. I managed to get access to EC2 the first time and this is my second try and I am unsuccessful so far. Any help is appreciated. regards Walker

    Read the article

  • AWS EC2 security group source

    - by greener
    I'm currently trying to configure a security group and allow MS SQL connections from my other instance. I want to be able to specify the security group's name as the source. But the connection is not going through. The instance's firewall has a rule to allow connections on the port. In fact, if I specify the IP of the machine as the source, it works. Just not the security group name. There are two other rules for the same port and they're for specific IPs only. What am I doing wrong?

    Read the article

  • Connectivity issues with dual NIC machine in EC2

    - by Matt Sieker
    I'm trying to get some servers set up in EC2 in a Virtual Private Cloud. To do this, I have two subnets: 10.0.42.0/24 - Public subnet 10.0.83.0/24 - Private subnet To bridge these two, I have a Funtoo instance with a pair of NICs: eth0 10.0.42.10 eth1 10.0.83.10 Which has the following routing table: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.83.0 * 255.255.255.0 U 0 0 0 eth1 10.0.83.0 * 255.255.255.0 U 203 0 0 eth1 10.0.42.0 * 255.255.255.0 U 202 0 0 eth0 loopback * 255.0.0.0 U 0 0 0 lo default 10.0.42.1 0.0.0.0 UG 0 0 0 eth0 default 10.0.42.1 0.0.0.0 UG 202 0 0 eth0 An elastic IP is attached to the eth0 interface, and I can connect to it fine remotely. However, I cannot ping anything in the 10.0.83.0 subnet. For now iptables is not set up on the box, so there's no rules that would get in the way (Eventually this will be managed by Shorewall, but I should get basic connectivity done first) Subnet details from the VPC interface: CIDR: 10.0.83.0/24 Destination Target 10.0.0.0/16 local 0.0.0.0/0 [ID of eth1 on NAT box] Network ACL: Default Inbound: Rule # Port (Service) Protocol Source Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY Outbound: Rule # Port (Service) Protocol Destination Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY   CIDR: 10.0.83.0/24 VPC: Destination Target 10.0.0.0/16 local 0.0.0.0/0 [Internet Gateway ID] Network ACL: Default (replace) Inbound: Rule # Port (Service) Protocol Source Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY Outbound: Rule # Port (Service) Protocol Destination Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY I've been trying to work this out most of the evening, but I'm just stuck. I'm either missing something obvious, or am doing something very wrong. I would think I'd be able to ping from either interface on this box without issue. Hopefully some more pairs of eyes on this configuration will help. EDIT: I am an idiot. After I bothered to install nmap to run some more tests, I discover I can see the ports, and connect to them, pings are just being blocked.

    Read the article

  • Can't install new database in OpenLDAP 2.4 with BDB on Debian

    - by Timothy High
    I'm trying to install an openldap server (slapd) on a Debian EC2 instance. I have followed all the instructions I can find, and am using the recommended slapd-config approach to configuration. It all seems to be just fine, except that for some reason it can't create my new database. ldap.conf.bak (renamed to ensure it's not being used): ########## # Basics # ########## include /etc/ldap/schema/core.schema include /etc/ldap/schema/cosine.schema include /etc/ldap/schema/nis.schema include /etc/ldap/schema/inetorgperson.schema pidfile /var/run/slapd/slapd.pid argsfile /var/run/slapd/slapd.args loglevel none modulepath /usr/lib/ldap # modulepath /usr/local/libexec/openldap moduleload back_bdb.la database config #rootdn "cn=admin,cn=config" rootpw secret database bdb suffix "dc=example,dc=com" rootdn "cn=manager,dc=example,dc=com" rootpw secret directory /usr/local/var/openldap-data ######## # ACLs # ######## access to attrs=userPassword by anonymous auth by self write by * none access to * by self write by * none When I run slaptest on it, it complains that it couldn't find the id2entry.bdb file: root@server:/etc/ldap# slaptest -f ldap.conf.bak -F slapd.d bdb_db_open: database "dc=example,dc=com": db_open(/usr/local/var/openldap-data/id2entry.bdb) failed: No such file or directory (2). backend_startup_one (type=bdb, suffix="dc=example,dc=com"): bi_db_open failed! (2) slap_startup failed (test would succeed using the -u switch) Using the -u switch it works, of course. But that merely creates the configuration. It doesn't resolve the underlying problem: root@server:/etc/ldap# slaptest -f ldap.conf.bak -F slapd.d -u config file testing succeeded Looking in the database directory, the basic files are there (with right ownership, after a manual chown), but the dbd file wasn't created: root@server:/etc/ldap# ls -al /usr/local/var/openldap-data total 4328 drwxr-sr-x 2 openldap openldap 4096 Mar 1 15:23 . drwxr-sr-x 4 root staff 4096 Mar 1 13:50 .. -rw-r--r-- 1 openldap openldap 3080 Mar 1 14:35 DB_CONFIG -rw------- 1 openldap openldap 24576 Mar 1 15:23 __db.001 -rw------- 1 openldap openldap 843776 Mar 1 15:23 __db.002 -rw------- 1 openldap openldap 2629632 Mar 1 15:23 __db.003 -rw------- 1 openldap openldap 655360 Mar 1 14:35 __db.004 -rw------- 1 openldap openldap 4431872 Mar 1 15:23 __db.005 -rw------- 1 openldap openldap 32768 Mar 1 15:23 __db.006 -rw-r--r-- 1 openldap openldap 2048 Mar 1 15:23 alock (note that, because I'm doing this as root, I had to also change ownership of some of the files created by slaptest) Finally, I can start the slapd service, but it dies in the attempt (text from syslog): Mar 1 15:06:23 server slapd[21160]: @(#) $OpenLDAP: slapd 2.4.23 (Jun 15 2011 13:31:57) $#012#011@incagijs:/home/thijs/debian/p-u/openldap-2.4.23/debian/build/servers/slapd Mar 1 15:06:23 server slapd[21160]: config error processing olcDatabase={1}bdb,cn=config: Mar 1 15:06:23 server slapd[21160]: slapd stopped. Mar 1 15:06:23 server slapd[21160]: connections_destroy: nothing to destroy. I manually checked the olcDatabase={1}bdb file, and it looks fine to my amateur eye. All my specific configs are there. Unfortunately, syslog isn't reporting a specific error in this case (if it were a file permission error, it would say). I've tried uninstalling and reinstalling slapd, changing permissions, Googling my wits out, but I'm tapped out. Any OpenLDAP genius out there would be greatly appreciated!

    Read the article

  • Importing XML into an AWS RDS instance

    - by RoyHB
    I'm trying to load some xml into an AWS RDS (mySql) instance. The xml looks like: (it's an xml dump of the ISO-3661 codes) <?xml version="1.0" encoding="UTF-8"?> <countries> <countries name="Afghanistan" alpha-2="AF" alpha-3="AFG" country-code="004" iso_3166-2="ISO 3166-2:AF" region-code="142" sub-region-code="034"/> <countries name="Åland Islands" alpha-2="AX" alpha-3="ALA" country-code="248" iso_3166-2="ISO 3166-2:AX" region-code="150" sub-region-code="154"/> <countries name="Albania" alpha-2="AL" alpha-3="ALB" country-code="008" iso_3166-2="ISO 3166-2:AL" region-code="150" sub-region-code="039"/> <countries name="Algeria" alpha-2="DZ" alpha-3="DZA" country-code="012" iso_3166-2="ISO 3166-2:DZ" region-code="002" sub-region-code="015"/> The command that I'm running is: LOAD XML LOCAL INFILE '/var/www/ISO-3166_SMS_Country_Codes.xml' INTO TABLE `ISO-3661-codes`(`name`,`alpha-2`,`alpha-3`,`country-code`,`region-code`,`sub-region-code`); The error message I get is: ERROR 1148 (42000): The used command is not allowed with this MySQL version The infile that is referenced exists, I've selected a database before running the command and I have appropriate privileges on the database. The column names in the database table exactly match the xml field names.

    Read the article

  • AWS EC2 & WordPress / WooCommerce, Product pages dragging

    - by Stephen Harman
    http://ec2-54-243-161-225.compute-1.amazonaws.com/shop/product-category/dark-horse/ If you click on any of the products on this page you'll notice it either takes a minute or more to load or it doesn't load at all. I have about 11,000 products in the database each with about 3 images attached to them, the database is about 108mbs in size. Any suggestions on fixing this speed issue? Thank you in advance!

    Read the article

  • VRF Internet Gateway Multiple External IP's 1 Internal IP to AWS

    - by user223903
    Trying to setup VRF for the first time and its not working for me even though I keep reading everything online. IP's are different to real life. I have an Internet connection which I can ping to my router in the current setup below 195.45.73.22 I have a block of ip addresses 195.45.121.0/27 I want to setup multiple VPN's to AWS so need to have multiple external ip's thus the block of IP addresses. I have setup the 2nd and 3rd IP address but can not ping them from external. Any help would be grateful. Bryan ip source-route ! ip vrf Internet rd 1:1 route-target export 1:1 route-target import 1:1 ip vrf AWSSydney1 rd 2:2 route-target export 2:2 route-target import 2:2 route-target import 1:1 ip vrf AWSSydney2 rd 3:3 route-target export 3:3 route-target import 3:3 route-target import 1:1 ip cef no ip domain lookup no ipv6 cef multilink bundle-name authenticated interface FastEthernet0/0 description Vocus Internet no ip address speed 100 full-duplex interface FastEthernet0/0.1 encapsulation dot1Q 1 native ip address 195.45.73.22 255.255.255.252 interface FastEthernet0/0.2 encapsulation dot1Q 2 ip vrf forwarding AWSSydney1 ip address 195.45.121.1 255.255.255.224 interface FastEthernet0/0.3 encapsulation dot1Q 3 ip vrf forwarding AWSSydney2 ip address 195.45.121.2 255.255.255.224 interface FastEthernet0/1 description LAN_SIDE ip address 10.0.0.5 255.255.255.0 speed 100 full-duplex no mop enabled ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 195.45.73.21 ip route vrf Internet 0.0.0.0 0.0.0.0 195.45.73.21

    Read the article

  • AWS lighttpd: Sending a copy of requests to test.

    - by Martin
    I have a load balanced service on AWS. So the ELB evenly distributes the load across my servers. Each server is running lighttpd that does logging and forwards the requests to my service (on the same machine). I have written a new version of the service. It is installed and running on an EC2 machine test1 (basically a mirror of our current server but the new service running instead of the original) and I have done some preliminary tests that look good. But what I would like to do is mirror a fraction of incoming traffic to the new version of the service so I can do some comparisons between an original version and the new version based on real traffic. Thus I was thinking I could modify one box behind the ELB to duplicate its traffic to the test1. I was thinking I could modify the configuration of lighttpd so that each request is mirrored/duplicated. i.e. the original service keeps responding as before but a mirror request is sent to test1 but the reply is just dropped). Unfortunately I have not been able to work this out. Any ideas on how I could mirror the requests from one box to itself and test1. Or any other ideas for testing.

    Read the article

  • Mounting Replicated Gluster Multi-AZ Storage

    - by Roman Newaza
    I have Replicated Gluster Storage which is used by Auto scaling Servers. Both, Auto scaling and Storage are allocated in two Availability zones. Gluster: Number of Bricks: 4 x 2 = 8 Transport-type: tcp Bricks: Brick1: gluster01:/storage/1a # Zone A Brick2: gluster02:/storage/1b # Zone B Brick3: gluster03:/storage/2a # Zone A Brick4: gluster04:/storage/2b # Zone B Brick5: gluster01:/storage/3a # Zone A Brick6: gluster02:/storage/3b # Zone B Brick7: gluster03:/storage/4a # Zone A Brick8: gluster04:/storage/4b # Zone B I used Round Robin DNS for Gluster entry point, so DNS name resolves to all of the storage server addresses which are returned in different order all the time: # host storage.domain.com storage.domain.com has address xx.xx.xx.x1 storage.domain.com has address xx.xx.xx.x2 storage.domain.com has address xx.xx.xx.x3 storage.domain.com has address xx.xx.xx.x4 The Storage is mounted with Native Gluster Client: # grep storage /etc/fstab storage.domain.com:/storage /storage glusterfs defaults,log-level=WARNING,log-file=/var/log/gluster.log 0 0 I have heard Gluster might be mounted with the first Server IP and after that it will fetch its configuration with the rest of Servers. Personally, I never tested single Server mount setup and I don't know how Gluster handles this. On EC2, traffic among single Availability zone is free and between different zones is not. When Client in zone A writes to storage and IP of Storage in zone B is returned, it will cost me twice more for data transfer: Client (Zone A) - Storage Server (Zone B) - Replication to Storage Server (Zone A). Question: Would it be better to mount Storage Server of the same zone, so that data transfer charges apply only for replication (A - A - B)?

    Read the article

  • How to mount /tmp in /mnt on EC2?

    - by Claudio Poli
    I was wondering what is the best way to mount the /tmp endpoint in the ephemeral storage /mnt on an EC2 instance and give the ubuntu user default write permissions. Some suggest editing /etc/rc.local this way: mkdir -p /mnt/tmp && mount --bind -o nobootwait /mnt/tmp /tmp However that doesn't work for me (files differs). I tried editing the default fstab entry: /dev/xvdb /mnt auto defaults,nobootwait,comment=cloudconfig 0 2 replacing /mnt with /tmp and and giving it a umask=0777, however it doesn't work because of cloudconfig. I'm using Ubuntu 12.04. Thanks.

    Read the article

  • Flash Media Server won't run on RHEL 6.2 EC2 instance - _defaultRoot__edge1 experienced 1 failure

    - by edoloughlin
    I've got a fresh Redhat Enterprise 6.2 64-bit instance on EC2. I've turned off the firewall and have installed an FMS 4.5 dev server. The FMS install failed, complaining about a missing libcap.so until I installed the libcap.i686 package. The following libcap packages are now installed: libcap.i686 2.16-5.5.el6 @rhui-us-east-1-rhel-server-releases libcap.x86_64 2.16-5.5.el6 @koji-override-0/$releasever libcap-ng.x86_64 0.6.4-3.el6_0.1 @koji-override-0/$releasever libpcap.x86_64 14:1.0.0-6.20091201git117cb5.el6 In the logs directory I have admin and master logs (only). The admin logs look ok: #Fields: date time x-pid x-status x-ctx x-comment 2012-02-29 09:24:26 1144 (i)2581173 FMS detected IPv6 protocol stack! - 2012-02-29 09:24:26 1144 (i)2581173 FMS config <NetworkingIPv6 enable=false> - 2012-02-29 09:24:26 1144 (i)2581173 FMS running in IPv4 protocol stack mode! - 2012-02-29 09:24:26 1144 (i)2581173 Host: ip-10-204-143-55 IPv4: 10.204.143.55 - 2012-02-29 09:24:26 1144 (i)2571011 Server starting... - 2012-02-29 09:24:26 1144 (i)2631174 Listener started ( FCSAdminIpcProtocol ) : localhost:11110/v4 - 2012-02-29 09:24:27 1144 (i)2631174 Listener started ( FCSAdminAdaptor ) : 1111/v4 - 2012-02-29 09:24:28 1144 (i)2571111 Server started (./conf/Server.xml). - I can't connect an RTMP client to the FMS. The master logs contain these lines, repeating every 5 seconds: 2012-02-29 10:43:17 1076 (i)2581226 Edge (2790) is no longer active. - 2012-02-29 10:43:17 1076 (w)2581255 Edge (2790) _defaultRoot__edge1 experienced 1 failure[s]! - 2012-02-29 10:43:17 1076 (i)2581224 Edge (2793) started, arguments : -edgeports ":1935,80" -coreports "localhost:19350" -conf "/opt/adobe/fms/conf/Server.xml" -adaptor "_defaultRoot_" -name "_defaultRoot__edge1" -edgename "edge1". -

    Read the article

  • Wordpress site on EC2 instance suddenly superslow

    - by Emil
    Set up a wordpress page the other day following this guide. The site was up and running, loading quickly and all was well, until today. Suddenly, loading the site takes forever and doesn't even work properly, the page shows up in an incomplete fashion. I tried rebooting the instance but that didn't help. The only actions I've taken on the server is to create an elastic IP, and to point a domainname to that IP. But I don't see how that could've slowed down the page. Any thoughts on what could have caused this and on a solution to the problem?

    Read the article

  • Monit unable to start sidekiq on Opsworks server

    - by webdevtom
    I have used AWS Opsworks to create some servers. I have Sidekiq running as part of my Rails application. When I deploy Sidekiq restarts nicely. I am configuring Monit to watch the pid and start and stop Sidekiq if there are any issues. However when Monit trys to start Sidekiq I see that the wrong Ruby looks to be used. Oct 17 13:52:43 daitengu sidekiq: /usr/local/lib/ruby/gems/1.9.1/gems/bundler-1.3.4/lib/bundler/definition.rb:361:in `validate_ruby!': Your Ruby version is 1.8.7, but your Gemfile specified 1.9.3 (Bundler::RubyVersionMismatch) Oct 17 13:52:43 daitengu sidekiq: from /usr/local/lib/ruby/gems/1.9.1/gems/bundler-1.3.4/lib/bundler.rb:116:in `setup' Oct 17 13:52:43 daitengu sidekiq: from /usr/local/lib/ruby/gems/1.9.1/gems/bundler-1.3.4/lib/bundler/setup.rb:17 When I run the command from the cli Sidekiq launches correctly. $> cd /srv/www/myapp/current && RAILS_ENV=production nohup /usr/local/bin/bundle exec sidekiq -C config/sidekiq.yml >> /srv/www/myapp/shared/log/sidekiq.log 2>&1 & $> ps -aef |grep sidekiq root 1236 1235 8 20:54 pts/0 00:00:50 sidekiq 2.11.0 myapp [0 of 25 busy] My sidekiq.monitrc file check process unicorn with pidfile /srv/www/myapp/shared/pids/unicorn.pid start program = "/bin/bash -c 'cd /srv/www/myapp/current && /usr/local/bin/bundle exec unicorn_rails --env production --daemonize -c /srv/www/myapp/shared/config/unicorn.conf'" stop program = "/bin/bash -c 'kill -QUIT `cat /srv/www/myapp/shared/pids/unicorn.pid`'"

    Read the article

  • EC2 Filesystem / Files stored on the wrong partiton after launching new instance from AMI

    - by Philip Isaacs
    Today I set up a new EC2 Instance from and AMI I created from an older EC2 instance. When I launched the new instance I took the AMI that was on a small instance and launched with a medium instance. From what I can tell this is pretty standard stuff. But here's the stang part. According to AWS these are the differences Small Instance (Default) 1.7 GB of memory, 1 EC2 Compute Unit (1 virtual core with 1 EC2 Compute Unit), 160 GB of local instance storage, 32-bit or 64-bit platform Medium Instance 3.75 GB of memory, 2 EC2 Compute Units (1 virtual core with 2 EC2 Compute Units each), 410 GB of local instance storage, 32-bit or 64-bit platform Okay now here's where I'm having an issue. I when I log into the new bigger instance it still reports only having 1.7 GB of ram. The other strange part is that all my old partitions are still their in the same configurations. I see a new larger partition /mnt which is essential empty. Filesystem Size Used Avail Use% Mounted on /dev/sda1 7.9G 5.9G 1.6G 79% / none 846M 120K 846M 1% /dev none 879M 0 879M 0% /dev/shm none 879M 76K 878M 1% /var/run none 879M 0 879M 0% /var/lock none 879M 0 879M 0% /lib/init/rw /dev/sda2 335G 195M 318G 1% /mnt /dev/sdf 16G 9.9G 5.1G 67% /var2 This EC2 is a web server and I was serving files off the /var2 directory but for some reason the instance is storing everything on / Okay here's what I'd like to do. Move all my website files to /mnt and have the web server point to that. Any suggestions? If it helps here is what my fstab looks like as well. root@myserver:/var# mount -l /dev/sda1 on / type ext3 (rw) [cloudimg-rootfs] proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) /dev/sda2 on /mnt type ext3 (rw) /dev/sdf on /var2 type ext4 (rw,noatime) I hope this question makes sense. Basically i want my old files on this new partition. Thanks in advance

    Read the article

  • Keeps "SSH timeout" error in our AWS instance- how do i diagnose?

    - by ming yeow
    I am befuddled by this error. We keep failing to SSH into our AWS instance, whether it is is deployment or via console. I have tried rebooting a few times, but it does not seem to be helping. Here are a couple of error messages i keep getting. connection failed for: HOST.NAME.amazonaws.com (Errno::ETIMEDOUT: Operation timed out - connect(2)) 111.222.333.444: ssh connection failed at 2010-07-02 03:39:37 I also SSHed in when it was up, and monitored "top" when ssh times out. looking at the memory logs, it does not look like any program was hogging

    Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >