Search Results

Search found 5845 results on 234 pages for 'commit protocol'.

Page 49/234 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

  • Internet slowed down because of SQUID Server setup

    - by Ranjith Kumar
    Recently I have setup a squid server for our office. I have computer (A) with two ethernet cards, one for internet and the second one for local networkIt has Ubuntu server OS with squid-server and dhcp3-server installedI have added few iptable rules to work like a router and redirect all http traffic to 3128 port This link is my reference. Everything worked fine for 2 days. All of a sudden internet speed went down drastically. When I connected the internet cable to my laptop to test the internet speed it was fine. Again when I reconnected it back to computer A everything was normal. This happened 4 times in a week. Could anyone here please help me why the internet speed is going down and it becomes normal when I reconnect the cable. EDIT: Rebooting the system (computer A) didn't make a difference. I have changed iptables so that http traffic doesn't redirect to 3128 port any further, still no change in the internet speed. I think the problem is not with squid but with something else. Here are my iptable rules SQUID_SERVER="10.1.1.1" INTERNET="eth1" LAN_IN="eth0" SQUID_PORT="3128" PROXYSERVERS=(Atlanta Baltimore Boston Chicago Dallas Denver Houston KansasCity LosAngeles Miami NewYork Philadelphia Phoenix SanAntonio SanDiego SanJose Seattle Washington) SERVERLEN=${#PROXYSERVERS[*]} I=0 iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X modprobe ip_conntrack modprobe ip_conntrack_ftp echo 1 /proc/sys/net/ipv4/ip_forward iptables -P INPUT DROP iptables -P OUTPUT ACCEPT iptables -A INPUT -i lo -j ACCEPT iptables -A OUTPUT -o lo -j ACCEPT iptables -A INPUT -i $INTERNET -m state --state ESTABLISHED,RELATED -j ACCEPT iptables --table nat --append POSTROUTING --out-interface $INTERNET -j MASQUERADE iptables --append FORWARD --in-interface $LAN_IN -j ACCEPT iptables -A INPUT -i $LAN_IN -j ACCEPT iptables -A OUTPUT -o $LAN_IN -j ACCEPT while [ $I -lt $SERVERLEN ]; do iptables -t nat -A PREROUTING -i $LAN_IN -p tcp -d ${PROXYSERVERS[$I]}.wonderproxy.com --dport 80 -j ACCEPT let I++ done iptables -t nat -A PREROUTING -i $LAN_IN -p tcp --dport 80 -j DNAT --to $SQUID_SERVER:$SQUID_PORT iptables -A INPUT --protocol tcp --dport 80 -j ACCEPT iptables -A INPUT --protocol tcp --dport 443 -j ACCEPT iptables -A INPUT --protocol tcp --dport 22 -j ACCEPT iptables -A INPUT -j LOG iptables -A INPUT -j DROP

    Read the article

  • HTB.init / tc behind NAT

    - by Ben K.
    I have an Ubuntu 10 box that I'm trying to set up as a bandwidth-shaping router. The machine has one WAN interface, eth0 and two LAN interfaces, eth1 and eth2. NAT is configured using MASQUERADE as described at InternetConnectionSharing. I'm mostly concerned with shaping outbound traffic from the LAN interfaces -- in the end, I'd like to end up with a hard 768Kbps limit per-LAN-interface (rather than a limit on eth0 pooled across all interfaces). I installed HTB.init, and riffing on the examples, tried to set this up on eth1 by putting three files into /etc/sysconfig/htb: /etc/sysconfig/htb/eth1 DEFAULT=30 R2Q=100 /etc/sysconfig/htb/eth1-2.root RATE=768Kbps BURST=15k /etc/sysconfig/htb/eth1-2:30.dfl RATE=768Kbps CEIL=788Kbps BURST=15k LEAF=sfq I can /etc/init.d/htb start and /etc/init.d/htb stats and see information that /seems/ to suggest it's working...but when I try pulling a large file via the WAN interface the shaping clearly isn't in effect. Any suggestions? My guess is it has something to do with where the shaping falls in the NAT chain, but I really have no idea where to begin troubleshooting this. ---- Update: Here's my /etc/init.d/htb list output, it seems to make sense -- the default rate for eth1 is 768Kbps? ### eth0: queueing disciplines qdisc htb 1: root refcnt 2 r2q 100 default 30 direct_packets_stat 0 qdisc sfq 30: parent 1:30 limit 127p quantum 1514b perturb 10sec ### eth0: traffic classes class htb 1:2 root rate 768000bit ceil 768000bit burst 1599b cburst 1599b class htb 1:30 parent 1:2 leaf 30: prio 0 rate 6144Kbit ceil 6144Kbit burst 15Kb cburst 1598b ### eth0: filtering rules filter parent 1: protocol ip pref 100 u32 filter parent 1: protocol ip pref 100 u32 fh 800: ht divisor 1 filter parent 1: protocol ip pref 100 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:30 match 00000000/00000000 at 12 match 00000000/00000000 at 16 ### eth1: queueing disciplines qdisc htb 1: root refcnt 2 r2q 100 default 30 direct_packets_stat 0 qdisc sfq 30: parent 1:30 limit 127p quantum 1514b perturb 10sec ### eth1: traffic classes class htb 1:2 root rate 768000bit ceil 768000bit burst 1599b cburst 1599b class htb 1:30 parent 1:2 leaf 30: prio 0 rate 6144Kbit ceil 6144Kbit burst 15Kb cburst 1598b

    Read the article

  • VPN issue: SSTP Service service started and then stopped

    - by Ampersand
    When I was trying to set up a VPN connect on my laptop running Windows 7 Ultimate, I got this error: Network Connections Cannot load the Remote Access Connection Manager service. Error 711: The operation could not finish because it could not start the Remote Access Connection Manager service in time. Please try the operation again. I traced through some service dependencies and discovered that Secure Socket Tunneling Protocol Service was set to Manual. However, when I try to manually start the service, I get: Services The Secure Socket Tunneling Protocol Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. Setting all the services involved to Automatic did not help. SSTP just showed Automatic and Stopped in the Services panel. I found a solution that involved booting in Safe Mode and deleting the contents of C:\Windows\System32\LogFiles\WMI\RtBackup. This solution worked, and I could set up a vpn connection, but only until I rebooted again. TL;DR I'm looking for a way to permanently enable Secure Socket Tunneling Protocol Service and other vpn-related services permanently so I don't have to reboot into safe mode and delete files every time I need to connect to a vpn.

    Read the article

  • Why won't this script accept any arguments?

    - by Nate Wagar
    I'm trying to write an SVN post-commit hook and, strangely, am getting hung up on what should be the easiest part. The Script: set REPO="$1" set REV="$2" set SVNBIN="/opt/CollabNet_Subversion/bin/" set SSHBIN="/usr/bin/ssh" set HOST="staging.domain.net" set timeout=30 set USERNAME="svn-usr" set E_NO_CONNECT=2 set E_WRONG_PASS=3 set E_UNKOWN=25 set CHANGED=`"$SVNBIN"svnlook changed --revision $REV $REPOS` echo "Here are changes: $CHANGED" >> /var/svn/repos/www/logs/testing echo "Command: $0; Repo: $REPO; Rev: $REV; Total: $#" >> /var/svn/repos/www/logs/testing set PROJECT "" Yet when I call it, it doesn't seem to be seeing the arguments I pass to it: /var/svn/repos/www/logs> sudo ../hooks/post-commit /var/svn/repos/www 33 svnlook: missing argument: --revision Type 'svnlook help' for usage. /var/svn/repos/www/logs> cat testing Here are changes: Command: ../hooks/post-commit; Repo: ; Rev: ; Total: 1 This is on a Solaris 10 SPARC box. I'm a bit of a script newbie, but shouldn't this be really easy??

    Read the article

  • What is the point of PPPoE?

    - by aaa90210
    I am trying to expand my knowledge of networking beyond the basics. I have started reading about PPP, and how it is used in DSL modems with PPPoE and PPPoA. My first impression of PPP was "well that seems pretty similar to Ethernet". They are both data link layer protocols. They both have fields to identify the encapsulated protocol (e.g. IP). They both have related protocols to assign IP addresses (DHCP and NCP). So my first question was "so what's the point of PPP, why not just use Ethernet?". The answer to that was fairly straightforward - Ethernet is not supported over a wide range of media like serial lines, and is a fairly specific technology to LAN's using CAT5 or similar. HOWEVER - then I was reading about PPPoE, and the obvious thought was "well if we are doing something over Ethernet, then Ethernet must be available and in use, so why not just use it?". In other words, PPPoE seems to be encapsulating one data-link layer protocol in another very similar protocol. Why do IP-inside-PPP-inside-Ethernet when we could just be doing IP-inside-Ethernet, and use DHCP rather than NCP to assign the IP address to the home router? Thanks

    Read the article

  • How do I specify the emergency location in CDP?

    - by chrish
    In the LLDP-MED and Cisco Discovery Protocol whitepaper, it compares LLDP-MED and CDP. The part I am interested in is emergency location configuration. In LLDP-MED, I can specify the Emergency Line Indentification Number (ELIN) and that number will be used by some IP Phones (e.g. Aastra) when placing emergency calls. The whitepaper states: Location Identification Discovery This capability is important because it normally provides location information from the switch to the phone. (If the phone is configured with location information or can determine its location, then it may send this information to the switch. However, the real value is getting this information from the switch to the phone for phones that cannot determine their own location.) Location identification discovery allows the phone to be aware of its location-information that can be used for location-based applications on the phone. More importantly, this capability can be used to provide location information when making emergency calls. Both Cisco Discovery Protocol and LLDP-MED support the transportation of location information. However, LLDP-MED has more supported data formats than Cisco Discovery Protocol. I have found the documentation on how to set the location and associate the location to the interfaces for LLDP-MED. How is this done for CDP? Is ELIN supported for CDP?

    Read the article

  • CentOS tftp server is broken

    - by Mike Pennington
    I'm trying to run tftpd from xinetd on CentOS 6; however, I can only tftp from localhost. I have a file in /opt/tftpboot/fw.test.conf that I can retrieve if I tftp to localhost: [mpenning@localhost ~]$ tftp localhost tftp> get fw.test.conf tftp> quit [mpenning@localhost ~]$ ls fw.test.conf [mpenning@localhost ~]$ However, I cannot receive this file if I tftp to eth1 on this server (the address on eth1 is 172.16.1.4). [mpenning@localhost ~]$ sudo tshark -i eth1 udp and host 172.16.1.5 Running as user "root" and group "root". This could be dangerous. Capturing on eth1 0.000000 172.16.1.5 -> 172.16.1.4 TFTP Read Request, File: fw.test.conf\000, Transfer type: netascii\000 5.000133 172.16.1.5 -> 172.16.1.4 TFTP Read Request, File: fw.test.conf\000, Transfer type: netascii\000 10.000184 172.16.1.5 -> 172.16.1.4 TFTP Read Request, File: fw.test.conf\000, Transfer type: netascii\000 15.000297 172.16.1.5 -> 172.16.1.4 TFTP Read Request, File: fw.test.conf\000, Transfer type: netascii\000 20.000331 172.16.1.5 -> 172.16.1.4 TFTP Read Request, File: fw.test.conf\000, Transfer type: netascii\000 ^C5 packets captured [mpenning@localhost ~]$ I have the following xinetd configuration: [root@localhost mpenning]# cat /etc/xinetd.d/tftp # default: off # description: The tftp server serves files using the trivial file transfer \ # protocol. The tftp protocol is often used to boot diskless \ # workstations, download configuration files to network-aware printers, \ # and to start the installation process for some operating systems. service tftp { socket_type = dgram protocol = udp wait = yes user = root server = /usr/sbin/in.tftpd server_args = -s /opt/tftpboot disable = no per_source = 11 cps = 100 2 flags = IPv4 } [root@localhost mpenning]#

    Read the article

  • ISA 2000 and COD MW2 Steam

    - by twlichty
    OK, so maybe not the "proper use" of network resources, but we enjoy the odd COD game during lunch hours. When we played COD4, we had a dedicated server setup at the back of the server room. With MW2, we need to be able to connect to steam to be able to play multi-player. I've found this support article here: https://support.steampowered.com/kb%5Farticle.php?ref=8571-GLVN-8711 Which outlines all the ports I need to open. I went through and created the following rules in ISA 2000 (I'm stuck with 2000 for now). Protocol Definition: Steam Primary connection: Port 27000, UDP, Send Receive Secondary Connection: Port range 27001-27030 Send Receive Protocol Definition: Steam TCP In Primary connection: 27014, TCP, Inbound Secondary Connection: Port range: 27015-27050, Inbound Protocol Definition: Steam 4380 Primary connection: 4380, UDP, Send Receive When I start steam on my local workstation (I did add an exception to the Vista Firewall to allow steam), the steam client sits on "Updating Steam" for 5 minutes then errors out with: You must connect to the internet first. Any ideas? I assume I missed something. Thanks for your help.

    Read the article

  • php_ibm_db2.dll on IIS 7.5 using PHP 5.3 error message

    - by grmbl
    I'm trying to use ibm_db2 extension to access iSeries DB2 database. This is the testcode (taken from here) <?php $database = 'ALI452BFAL'; //library $user = 'STN452'; $password = '**********'; $hostname = 'myserverip'; $port = 50000; $conn_string = "DRIVER={IBM DB2 ODBC DRIVER};DATABASE=$database;" . "HOSTNAME=$hostname;PORT=$port;PROTOCOL=TCPIP;UID=$user;PWD=$password;"; $conn = db2_connect($conn_string, '', ''); if ($conn) { print "ok"; db2_close($conn); } else { echo db2_conn_error() . '<br>' . db2_conn_errormsg(); } ?> I have installed a very basic package containing the db2 driver and added this as an extension. (IBM Data Server Driver for ODBC, CLI, and .NET.msi) This is my result: 08001 [IBM][CLI Driver] SQL30081N A communication error has been detected. Communication protocol being used: "TCP/IP". Communication API being used: "SOCKETS". Location where the error was detected: "10.10.0.120". Communication function detecting the error: "connect". Protocol specific error code(s): "10061", "", "". SQLSTATE=08001 SQLCODE=-30081 Anybody tried this before??

    Read the article

  • PHP include() through HTTP makes Apache time out

    - by Adam Interact
    I have a problem with ExpressionEngine2 after moving from an old server to WHM/cPanel running on CentOS6.4. Simple test code to reproduce that issue: <?php $protocol = strpos(strtolower($_SERVER['SERVER_PROTOCOL']),'https') === FALSE ? 'http' : 'https'; $host = $_SERVER['HTTP_HOST']; include($protocol . '://' . $host . '/header.html'); ?> <p> Main text...</p> <?php include($protocol . '://' . $host . '/footer.html'); ?> Where header.html looks like <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Untitled Document</title> </head> <body> and footer.html looks like: </body> </html> Creates Apache time out: Warning: include(http://www.domain.com/header.html) [function.include]: failed to open stream: Connection timed out in /home/domain/public_html/test/index.php on line 5 Warning: include() [function.include]: Failed opening 'http://www.domain.com/header.html' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/domain/public_html/test/index.php on line 5 Main text... Warning: include(http://www.domain.com/footer.html) [function.include]: failed to open stream: Connection timed out in /home/domain/public_html/test/index.php on line 12 Warning: include() [function.include]: Failed opening 'http://www.domain.com/footer.html' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/domain/public_html/test/index.php on line 12 Any clue what can be wrong with Apache or PHP configuration? Thanks

    Read the article

  • NoMachine NX window closes after establishing connection

    - by blackicecube
    I am trying to use nomachine nx server and client. But somehow it doen't work. What happens is the following: Client starts up Client authenticates with Server The NoMachine window appears for 2-4 seconds The NoMachine window exists Somehow a "closeEvent" is sent. Here's what I see in the log file: [Thu Sep 24 11:20:37 2009]: Starting nxcomp with options: 'NX 299 Switch connection to: NX mode: unencrypted options: nx/nx,options=/home/foo/.nx/S-adnws029-1022-7EEF1367361DB2A7F4D9F76B06F4B434/options:1022'. [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor: opened file: [/home/foo/.nx/S-adnws029-1022-7EEF1367361DB2A7F4D9F76B06F4B434/session] [Thu Sep 24 11:20:38 2009]: LoginDialog::ShowConnectionStatus code=[246] str=[Initializing X protocol compression] error=[0] [Thu Sep 24 11:20:38 2009]: ProgressDialog::printNxStatus: [Initializing X protocol compression] [Thu Sep 24 11:20:38 2009]: LoginDialog::ShowConnectionStatus code=[247] str=[Established the display connection] error=[0] [Thu Sep 24 11:20:38 2009]: ProgressDialog::printNxStatus: [Established the display connection] [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: LoginDialog: slotAgentTimer [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: QClipboard: Unknown SelectionClear event received. [Thu Sep 24 11:20:38 2009]: LoginDialog: slotAgentTimer [Thu Sep 24 11:20:38 2009]: LoginDialog: Agent found closing windows... [Thu Sep 24 11:20:38 2009]: LoginDialog: setting automatic reconnection to true. [Thu Sep 24 11:20:38 2009]: Settings::flush [Thu Sep 24 11:20:38 2009]: Settings::flush [Thu Sep 24 11:20:38 2009]: LoginDialog: closeEvent received! [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: LoginDialog::destructor called begin [Thu Sep 24 11:20:38 2009]: LoginDialog: stopAllTimers [Thu Sep 24 11:20:38 2009]: LoginDialog: stopProgressTimer [Thu Sep 24 11:20:38 2009]: Utility::getPreferencesFile: 'nxclient' - '/home/foo/.nx/config/nxclient.cfg' [Thu Sep 24 11:20:38 2009]: Settings::flush [Thu Sep 24 11:20:38 2009]: Called destructor for protocol class [Thu Sep 24 11:20:38 2009]: LoginDialog::destructor called end Anyone with a helpful idea?

    Read the article

  • SSH multi-hop connections with netcat mode proxy

    - by aef
    Since OpenSSH 5.4 there is a new feature called natcat mode, which allows you to bind STDIN and STDOUT of local SSH client to a TCP port accessible through the remote SSH server. This mode is enabled by simply calling ssh -W [HOST]:[PORT] Theoretically this should be ideal for use in the ProxyCommand setting in per-host SSH configurations, which was previously often used with the nc (netcat) command. ProxyCommand allows you to configure a machine as proxy between you local machine and the target SSH server, for example if the target SSH server is hidden behind a firewall. The problem now is, that instead of working, it throws a cryptic error message in my face: Bad packet length 1397966893. Disconnecting: Packet corrupt Here is an excerpt from my ~/.ssh/config: Host * Protocol 2 ControlMaster auto ControlPath ~/.ssh/cm_socket/%r@%h:%p ControlPersist 4h Host proxy-host proxy-host.my-domain.tld HostName proxy-host.my-domain.tld ForwardAgent yes Host target-server target-server.my-domain.tld HostName target-server.my-domain.tld ProxyCommand ssh -W %h:%p proxy-host ForwardAgent yes As you can see here, I'm using the ControlMaster feature so I don't have to open more than one SSH connection per-host. The client machine I tested this with is an Ubuntu 11.10 (x86_64) and both proxy-host and target-server are Debian Wheezy Beta 3 (x86_64) machines. The error happens when I call ssh target-server. When I call it with the -v flag, here is what I get additionally: OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011 debug1: Reading configuration data /home/aef/.ssh/config debug1: Applying options for * debug1: Applying options for target-server.my-domain.tld debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: auto-mux: Trying existing master debug1: Control socket "/home/aef/.ssh/cm_socket/[email protected]:22" does not exist debug1: Executing proxy command: exec ssh -W target-server.my-domain.tld:22 proxy-host.my-domain.tld debug1: identity file /home/aef/.ssh/id_rsa type -1 debug1: identity file /home/aef/.ssh/id_rsa-cert type -1 debug1: identity file /home/aef/.ssh/id_dsa type -1 debug1: identity file /home/aef/.ssh/id_dsa-cert type -1 debug1: identity file /home/aef/.ssh/id_ecdsa type -1 debug1: identity file /home/aef/.ssh/id_ecdsa-cert type -1 debug1: permanently_drop_suid: 1000 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.0p1 Debian-3 debug1: match: OpenSSH_6.0p1 Debian-3 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8p1 Debian-7ubuntu1 debug1: SSH2_MSG_KEXINIT sent Bad packet length 1397966893. Disconnecting: Packet corrupt

    Read the article

  • Vyatta internet connection + hosted site on same IP

    - by boburob
    Having a small issue setting up a vyatta. The company internet and two different websites are both on the same IP. Server 1 - Has websites hosted on ports 1000 and 3000 and also has a proxy server installed to provide internet connection to the domain Server 2 - Has a website hosted on ports 80 and 433 The vyatta is correctly natting the appropriate traffic to each server, and allowing the proxy to get internet traffic, however I have a problem getting to the websites hosted on these two servers inside the domain. I believe the problem is that the HTTP request is being sent with an IP, eg: 12.34.56.78. The request will reach the website and the server will attempt to send the request back to the IP, however this is the IP of the Vyatta, so it has nowhere else to go. I thought the solution would be something like this: rule 50 { destination { address 12.34.56.78 port 1000 } inbound-interface eth1 inside-address { address 10.19.2.3 } protocol tcp type destination } But this doesnt seem to do it! UPDATE I changed the rules to the following: rule 50 { destination { address 12.34.56.78 port 443 } outbound-interface eth1 protocol tcp source { address 10.19.2.3 } type masquerade } rule 51 { destination { address 12.34.56.78 port 443 } inbound-interface eth1 inside-address { address 10.19.2.2 } protocol tcp type destination } I am now seeing traffic going between the two with Wireshark, but the website will still fail to load.

    Read the article

  • Blocking an IP in Webmin

    - by Dan J
    I've been checking my /var/log/secure log recently and have seen the same bot trying to brute force onto my Centos server running webmin. I created a chain + rule in Networking - Linux Firewall: Drop If source is 113.106.88.146 But I'm still seeing the attempted logins in the log: Jun 6 10:52:18 CentOS5 sshd[9711]: pam_unix(sshd:auth): check pass; user unknown Jun 6 10:52:18 CentOS5 sshd[9711]: pam_succeed_if(sshd:auth): error retrieving information about user larry Jun 6 10:52:19 CentOS5 sshd[9711]: Failed password for invalid user larry from 113.106.88.146 port 49328 ssh2 Here is the contents of /etc/sysconfig/iptables: # Generated by webmin *filter :banned-ips - [0:0] -A INPUT -p udp -m udp --dport ftp-data -j ACCEPT -A INPUT -p udp -m udp --dport ftp -j ACCEPT -A INPUT -p udp -m udp --dport domain -j ACCEPT -A INPUT -p tcp -m tcp --dport 20000 -j ACCEPT -A INPUT -p tcp -m tcp --dport 10000 -j ACCEPT -A INPUT -p tcp -m tcp --dport https -j ACCEPT -A INPUT -p tcp -m tcp --dport http -j ACCEPT -A INPUT -p tcp -m tcp --dport imaps -j ACCEPT -A INPUT -p tcp -m tcp --dport imap -j ACCEPT -A INPUT -p tcp -m tcp --dport pop3s -j ACCEPT -A INPUT -p tcp -m tcp --dport pop3 -j ACCEPT -A INPUT -p tcp -m tcp --dport ftp-data -j ACCEPT -A INPUT -p tcp -m tcp --dport ftp -j ACCEPT -A INPUT -p tcp -m tcp --dport domain -j ACCEPT -A INPUT -p tcp -m tcp --dport smtp -j ACCEPT -A INPUT -p tcp -m tcp --dport ssh -j ACCEPT -A banned-ips -s 113.106.88.146 -j DROP COMMIT # Completed # Generated by webmin *mangle :FORWARD ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT # Completed # Generated by webmin *nat :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT # Completed

    Read the article

  • MacOS creates a new mount on AFP path calls

    - by jAndy
    Hi Folks, following scenario: In my webapp, my customers are using Firefox as target browser. They have the need to open afp:// folders via Javascript. To make a long story short, this really works. You need to setup Firefox with about:config and set the value network.protocol-handler.external.afp to true. What happens then, the operating system (OSX) takes care of that path and it correctly opens a Finder window. The problem: OSX does create a new mount every time. It cannot distinct between afp://host/path/111 and afp://host/path/222 for instance. Furthermore, even if the afp path is 100% identical a new mount is created. It looks like this is the default behavior from OSX regardless of Firefox. So, is there any chance I can tell OSX not to create a new mount for some sub directorys which should get access over afp:// ? update: It looks like, there are OSX applications which can change the default behavior for network protocols. So you can change "somewhere" which application OSX should call for a protocol. If that is true, wouldn't it be possible to create a script which just opens the local path without a afp:// prefix ? The question here is, where is that configuration (?) to tell OSX which application to use for specific protocol. Any help welcome!

    Read the article

  • Why Wireshark does not recognize this HTTP response?

    - by Alois Mahdal
    I have a trivial CGI script that outputs simple text content. It's written in Perl and using CGI module and it specifies only the most basic headers: print $q->header( -type => 'text/plain', -Content_length => $length, ); print $stuff; There's no apparent issue with functionality, but I'm confused about the fact that Wireshark does not recognize the HTTP response as HTTP--it's marked as TCP. Here is request and response: GET /cgi-bin/memfile/memfile.pl?mbytes=1 HTTP/1.1 Host: 10.6.130.38 User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:11.0) Gecko/20100101 Firefox/11.0 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: cs,en-us;q=0.7,en;q=0.3 Accept-Encoding: gzip, deflate Connection: keep-alive HTTP/1.1 200 OK Date: Thu, 05 Apr 2012 18:52:23 GMT Server: Apache/2.2.15 (Win32) mod_ssl/2.2.15 OpenSSL/0.9.8m Content-length: 1048616 Keep-Alive: timeout=5, max=100 Connection: Keep-Alive Content-Type: text/plain; charset=ISO-8859-1 XXXXXXXX... And here is the packet overview (Full packet is here on pastebin) No. Time Source srcp Destination dstp Protocol Info tcp.stream abstime 5 0.112749 10.6.130.38 80 10.6.130.53 48072 TCP [TCP segment of a reassembled PDU] 0 20:52:23.228063 Frame 5: 1514 bytes on wire (12112 bits), 1514 bytes captured (12112 bits) Ethernet II, Src: Dell_97:29:ac (00:1e:4f:97:29:ac), Dst: Dell_3b:fe:70 (00:24:e8:3b:fe:70) Internet Protocol Version 4, Src: 10.6.130.38 (10.6.130.38), Dst: 10.6.130.53 (10.6.130.53) Transmission Control Protocol, Src Port: http (80), Dst Port: 48072 (48072), Seq: 1, Ack: 330, Len: 1460 Now when I see this in Wireshark: there's usual TCP handshake then the GET request shown as HTTP with preview then the next packet contains the response, but is not marked as an HTTP response--just a generic "[TCP segment of a reassembled PDU]", and is not caught by "http.response" filter. Can somebody explain why Wireshark does not recognize it? Is there something wrong with the response?

    Read the article

  • DRBD stacked resources: recovering from failure

    - by Marcus Downing
    We're running a stacked four-node DRBD setup like this: A --> B | | v v C D This means three DRBD resources running across these four servers. Servers A and B are Xen hosts running VMs, while servers C and D are for backups. A is in the same datacentre as C. From server A to server C, in the first datacentre, using protocol B From server B to server D, in the second datacentre, using protocol B From server A to server B, different datacentres, stacked resource using protocol A First question: booting a stacked resource We haven't got any vital data running on this setup yet - we're still making sure it works first. This means simulating power cuts, network outages etc and seeing what steps we need to recover. When we pull the power out of server A, both resources go down; it attempts to bring them back up at next boot. However, it only succeeds at bringing up the lower-level resource, A-C. The stacked resource A-B doesn't even try to connect, presumably because it can't find the device until it's a connected primary on the lower level. So if anything goes wrong we need to manually log in and bring that resource up, then start the virtual machine on top of it. Second question: setting the primary of a stacked resource Our lower-level resources are configured so that the right one is considered primary: resource test-AC { on A { ... } on C { ... } startup { become-primary-on A; } } But I don't see any way to do the same with a stacked resource, as the following isn't a valid config: resource test-AB { stacked-on-top-of test-AC { ... } stacked-on-top-of test-BD { ... } startup { become-primary-on test-AC; } } This too means that recovering from a failure requires manual intervention. Is there no way to set the automatic primary for a stacked resource?

    Read the article

  • Trouble with port 80 nating (XenServer to WebServer VM)

    - by Lain92
    I have a rent server running XenServer 6.2 I only have 1 public IP so i did some NAT to redirect ports 22 and 80 to my WebServer VM. I have a problem with the port 80 redirection. When i use this redirection, i can get in the WebServer's Apache but this server lose Web access. I get this kind of error : W: Failed to fetch http://http.debian.net/debian/dists/wheezy/main/source/Sources 404 Not Found [IP: 46.4.205.44 80] but i can ping anywhere. XenserverIP:80 redirected to 10.0.0.2:80 (WebServer). This is the port 80 redirection part of my XenServer iptables : -A PREROUTING -i xenbr1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 10.0.0 .2:80 -A INPUT -i xenbr1 -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT COMMIT What is wrong in my configuration? Is there a problem with XenServer? Thanks for your help ! Edit : Here is my iptables full content : *nat :PREROUTING ACCEPT [51:4060] :POSTROUTING ACCEPT [9:588] :OUTPUT ACCEPT [9:588] -A PREROUTING -p tcp -m tcp --dport 1234 -j DNAT --to-destination 10.0.0.2:22 -A PREROUTING -i xenbr1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 10.0.0 .2:80 -A POSTROUTING -s 10.0.0.0/255.255.255.0 -j MASQUERADE COMMIT *filter :INPUT ACCEPT [5434:4284996] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [5014:6004729] -A INPUT -i xenbr1 -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT COMMIT Update : I have a second server with 10.0.0.3 as IP and it has the same problem that 10.0.0.2 has.

    Read the article

  • Wifi Works with Android and Windows 8 but not Linux and Win 7

    - by eramm
    Support has told me that our company wide wifi network is setup to support mobile phones only. However it doesn't make sense to me that they can identify a mobile device rather they have setup the Access Point to use a protocol that is only supported on Android and Windows phones. Because the Access Point supports Windows mobile this means that laptops running Windows 8 can also connect to the Access Point (proven). So it stands to reason that since Android is based on Linux there must be a way to connect using Linux as well. iwlist shows IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : 802.1x WIreshark seems to show that a connection is being made to a website to get a certificate and use a Domain Controller for authentication. Questions: 1) what protocol could they be using that is supported on Win Mobile and Android but not on Win 7 and Linux (Debian) ? 2) what tools can I use to help me discover what protocol i need to support ? I have used iwlist and wireshark but I was not able to glean to much useful information from them. I can post the results if needed. 3) is there an app i can use on my Android phone to help me understand what kind of network it is connecting to ? I can provide more information if you tell me how to get it. I just don't know what I am looking for.

    Read the article

  • Iptables - forward email ports?

    - by Emmet Brown
    im trying to open some local ports (LAN) and then re-direct them to another server (WAN) using iptables. Here is my config: #WAN allow-hotplug eth1 auto eth1 iface eth1 inet static #Tarjeta red WAN address 192.168.2.2 gateway 192.168.2.1 netmask 255.255.255.0 #LAN allow-hotplug eth0 auto eth0 iface eth0 inet static address 192.168.16.6 netmask 255.255.255.0 network 192.168.16.0 broadcast 192.168.16.255 I try this: iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 110 -j DNAT --to 200.40.30.218:110 iptables -A FORWARD -p tcp -i eth0 -o eth1 -d 200.40.30.218 --dport 110 -j ACCEPT iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 25 -j DNAT --to 200.40.30.218:25 iptables -A FORWARD -p tcp -i eth0 -o ethq -d 200.40.30.218 --dport 25 -j ACCEPT but, it did not work. i also try changeing eth0 to eth1 (and eth1 to eth0) but nothing happened. Starting Nmap 5.00 ( http://nmap.org ) at 2011-10-03 14:44 UYST Interesting ports on 192.168.16.6: Not shown: 997 closed ports PORT STATE SERVICE 22/tcp open ssh 111/tcp open rpcbind 8080/tcp open http-proxy Im running debian. Can u guys help me to check what is happening? edit: IPTABLES-SAVE # Generated by iptables-save v1.4.8 on Mon Oct 3 15:43:14 2011 *mangle :PREROUTING ACCEPT [139993:77867651] :INPUT ACCEPT [139385:77761761] :FORWARD ACCEPT [186:12071] :OUTPUT ACCEPT [173556:74341650] :POSTROUTING ACCEPT [173734:74352988] COMMIT # Completed on Mon Oct 3 15:43:14 2011 # Generated by iptables-save v1.4.8 on Mon Oct 3 15:43:14 2011 *nat :PREROUTING ACCEPT [1649:190626] :POSTROUTING ACCEPT [6729:339646] :OUTPUT ACCEPT [6697:337660] -A PREROUTING -i eth0 -p tcp -m tcp --dport 110 -j DNAT --to-destination 200.40.30.218:110 -A PREROUTING -i eth0 -p tcp -m tcp --dport 25 -j DNAT --to-destination 200.40.30.218:25 COMMIT # Completed on Mon Oct 3 15:43:14 2011 # Generated by iptables-save v1.4.8 on Mon Oct 3 15:43:14 2011 *filter :INPUT ACCEPT [138307:77066136] :FORWARD ACCEPT [168:11207] :OUTPUT ACCEPT [172288:73655708] -A FORWARD -d 200.40.30.218/32 -i eth0 -o eth1 -p tcp -m tcp --dport 110 -j ACCEPT -A FORWARD -d 200.40.30.218/32 -i eth0 -o ethq -p tcp -m tcp --dport 25 -j ACCEPT COMMIT # Completed on Mon Oct 3 15:43:14 2011 Regards

    Read the article

  • Load balance to proxies

    - by LoveRight
    I have installed several proxy programs whose IP addresses are, for example, 127.0.0.1:8580(use http), 127.0.0.1:9050(use socks5). You may regrard them as Tor and its alternatives. You know, certain proxy programs are faster than others at times, while at other times, they would be slower. The Firefox add-in, AutoProxy and FoxyProxy Standard, can define a list of rules such as any urls matching the pattern *.google.com should be proxied to 127.0.0.1:8580 using socks5 protocol. But the rule is "static". I want *.google.com to be proxied to the fastest proxy, no matter which one. I think that is kind of load balancing. I thought I could set a rule that direct request of *.google.com to the address the load balancer listens, and the load balancer forwards the request to the fastest real proxy. I notice that tor uses socks5 protocol and some other applications use http. I feel confused that which protocol should the load balancer use. I also start to wonder about the feasibility of this solution. Any suggestions? My operating system is Windows 7 x64.

    Read the article

  • Trac vs. Redmine vs. JIRA vs. FogBugz for one-man shop?

    - by kizzx2
    Background I am a one-man freelancer looking for a project management software that can provide the following requirements. I have used Trac for about a year now. Tried Redmine and FogBugz on Demand for a couple of weeks. Never tried JIRA before. Basically, I'm looking for a piece of software that: Facilitates developer-client communication/collaboration Does time tracking Requirements Record time estimates/Time tracking Clients must be able to create/edit his own tickets/cases Clients must not see Developer created tickets/cases (internal) Affordable (price) with multiple clients Nice-to-haves Supports multiple projects in one installation Free eclipse integration (Mylyn) Easy time-tracking without using the Web UI (Trac's post commit hook or Redmine's commit message scanning) Clients can access the Wiki Export the data to standard formats My evaluation Trac can basically fulfill most of the above requirements, but with lots of customizations and plug-ins that it doesn't feel so clean. One downside is that the main trunk (0.11) has been around for a year or more and I still haven't seen much tendency of any upgrades coming up. Redmine has the cleanest Web UI. It's design philosophy seems to be the most elegant, with its innovative commit message scanning and stuff. However, the current version doesn't seem to be very mature and stable yet. It doesn't support internal (private) tickets and the time-tracking commit message patch doesn't support the trunk version. The good thing about it is that the main trunk still seems to be actively developed. FogBugz is actually a very well written piece of software. However the idea of paying $25/month for the client to be able to log-in to the system seems a little bit too far off for an individual developer. The free version supports letting clients create/view their own cases using email, which is a sub-optimal alternative to having a full-fledged list of the user's own cases. That also means clients can't read/write wiki pages. Its time-tracking approach is innovative and good though. However the fact that all the eclipse integration (Bugclipse, Foglyn) are commercial. Yet other investments before I can use my bug-tracker! If I revert back to the Web UI, it's not really a fast rendering Web service. Also, the in-built report functions are excellent (e.g. evidence based scheduling) JIRA is something I have zero experience with. Can someone with JIRA experience recommend why it might be a good fit for this particular situation? Question Can we share experience on this? Any specific plugins/customizations would that would best suit the requirements for this case?

    Read the article

  • WSDLException : An error occurred trying to resolve schema referenced at ...

    - by Stefano
    Hello i'm trying to generate a proxy class from a local wsdl file with eclipse Galileo and axis 2 1.4 on windows xp . My problem is that i get an error due to an imported schema inside the wsdl . The line tha troubles me is : <xsd:import namespace="http://www.w3.org/2005/05/xmlmime" schemaLocation="http://www.w3.org/2005/05/xmlmime"/> i've tried to run the wsdl2java following command: wsdl2java.bat -uri SOAService.wsdl -o D:\temp p test -d xmlbeans -a -s -ns2p -uw and i get the following exception : Exception in thread "main" org.apache.axis2.wsdl.codegen.CodeGenerationException : Error parsing WSDL at org.apache.axis2.wsdl.codegen.CodeGenerationEngine.(CodeGenerat ionEngine.java:156) at org.apache.axis2.wsdl.WSDL2Code.main(WSDL2Code.java:35) at org.apache.axis2.wsdl.WSDL2Java.main(WSDL2Java.java:24) Caused by: javax.wsdl.WSDLException: WSDLException (at /wsdl:definitions/wsdl:ty pes/xsd:schema): faultCode=OTHER_ERROR: An error occurred trying to resolve sche ma referenced at 'http://www.w3.org/2005/05/xmlmime', relative to 'file:/D:/Prog rammi/axis2-1.4/bin/SOAService.wsdl'.: java.net.ConnectException: Connection tim ed out: connect at com.ibm.wsdl.xml.WSDLReaderImpl.parseSchema(Unknown Source) at com.ibm.wsdl.xml.WSDLReaderImpl.parseSchema(Unknown Source) at com.ibm.wsdl.xml.WSDLReaderImpl.parseTypes(Unknown Source) at com.ibm.wsdl.xml.WSDLReaderImpl.parseDefinitions(Unknown Source) at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source) at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source) at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source) at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source) at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source) at org.apache.axis2.wsdl.codegen.CodeGenerationEngine.readInTheWSDLFile( CodeGenerationEngine.java:288) at org.apache.axis2.wsdl.codegen.CodeGenerationEngine.(CodeGenerat ionEngine.java:111) ... 2 more Caused by: java.net.ConnectException: Connection timed out: connect at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.Socket.connect(Socket.java:520) at java.net.Socket.connect(Socket.java:470) at sun.net.NetworkClient.doConnect(NetworkClient.java:157) at sun.net.www.http.HttpClient.openServer(HttpClient.java:388) at sun.net.www.http.HttpClient.openServer(HttpClient.java:523) at sun.net.www.http.HttpClient.(HttpClient.java:231) at sun.net.www.http.HttpClient.New(HttpClient.java:304) at sun.net.www.http.HttpClient.New(HttpClient.java:321) at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLC onnection.java:813) at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConne ction.java:765) at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection .java:690) at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLCon nection.java:934) at java.net.URL.openStream(URL.java:1007) at com.ibm.wsdl.util.StringUtils.getContentAsInputStream(Unknown Source) i suspect it's due to the system proxy which doesn't let retrieve the xsd to the wsdl2java tool. In fact i can download the file from the browser without problems. There's an option to specify a proxy to wsdl2java or someone has resolved this issue ? For the moment i've downloaded the xsd, added it to the project and changed the wsdl to include the relative file (instead of the remote one) , but i'd prefer to avoid this , because the file is a third party service wsdl. thank you in advance for any hint Stefano

    Read the article

  • Is it possible to expose data from Oracle using OData?

    - by Michael Rosario
    From my personal research, it appears that OData implementations depend extensively on MS Entity framework. It would seem possible to implement the OData producer protocol using an open ORM like NHibernate in C# or Hibernate in Java. In the best of all worlds, it would be cool to expose data using OData protocol from Oracle. I am open to other open solutions like Java, JRuby, etc. Thanks in advance for your time.

    Read the article

  • SVN (Subversion) Problem "File is scheduled for addition, but is missing" - Using Versions

    - by Mike
    I'm using Versions for SVN. I attempt to commit and get this message: Commit failed (details follow): '/Users/mike/Sites/mysite.com/astss-cvsdude/Trunk/cart/flashfile.swf' is scheduled for addition, but is missing I suppose this is because I had added files to the repo, and then deleted them via the filesystem. I'd like to have it simply make note of my change, and apply the change to the repo. How can I get around this?

    Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >