copyright - Page 49 - Developer IT

Source code versioning with comments (organizational practice) - leave or remove?

- by ADTC

Before you start admonishing me with "DON'T DO IT," "BAD PRACTICE!" and "Learn to use proper source code control", please hear me out first. I am fully aware that the practice of commenting out old code and leaving it there forever is very bad and I hate such practice myself. But here's the situation I'm in. A few months ago I joined a company as software developer. I had worked in the company for few months as an intern, about a year before joining recently. Our company uses source code version control (CVS) but not properly. Here's what happened both in my internship and my current permanent position. Each time I was assigned to work on a project (legacy, about 8-10 years old). Instead of creating a CVS account and letting me check out code and check in changes, a senior colleague exported the code from CVS, zipped it up and passed it to me. While this colleague checks in all changes in bulk every few weeks, our usual practice is to do fine-grained versioning in the actual source code itself (each file increments in versions independent from the rest). Whenever a change is made to a file, old code is commented out, new code entered below it, and this whole section is marked with a version number. Finally a note about the changes is placed at the top of the file in a section called Modification History. Finally the changed files are placed in a shared folder, ready and waiting for the bulk check-in. /* * Copyright notice blah blah * Some details about file (project name, file name etc) * Modification History: * Date Version Modified By Description * 2012-10-15 1.0 Joey Initial creation * 2012-10-22 1.1 Chandler Replaced old code with new code */ code .... //v1.1 start //old code new code //v1.1 end code .... Now the problem is this. In the project I'm working on, I needed to copy some new source code files from another project (new in the sense that they didn't exist in destination project before). These files have a lot of historical commented out code and comment-based versioning including usually long or very long Modification History section. Since the files are new to this project I decided to clean them up and remove unnecessary code including historical code, and start fresh at version 1.0. (I still have to continue the practice of comment-based versioning despite hating it. And don't ask why not start at version 0.1...) I have done similar something during my internship and no one said anything. My supervisor has seen the work a few times and didn't say I shouldn't do such clean-up (if at all it was noticed). But a same-level colleague saw this and said it's not recommended as it may cause downtime in the future and increase maintenance costs. An example is when changes are made in another project on the original files and these changes need to be propagated to this project. With code files drastically different, it could cause confusion to an employee doing the propagation. It makes sense to me, and is a valid point. I couldn't find any reason to do my clean-up other than the inconvenience of a ridiculously messy code. So, long story short: Given the practice in our company, should I not do such clean-up when copying new files from project to project? Is it better to make changes on the (copy of) original code with full history in comments? Or what justification can I give for doing the clean-up? PS to mods: Hope you allow this question some time even if for any reason you determine it to be unfit in SO. I apologize in advance if anything is inappropriate including tags.

Read the article

Why does my C++ LinkedList method print out the last word more than once?

- by Anthony Glyadchenko

When I call the cmremoveNode method in my LinkedList from outside code, I get an EXC_BAD_ACCESS. FIXED: But now the last word using the following test code gets repeated twice: #include <iostream> #include "LinkedList.h" using namespace std; int main (int argc, char * const argv[]) { ctlinkList linkMe; linkMe.cminsertNode("The"); linkMe.cminsertNode("Cat"); linkMe.cminsertNode("Dog"); linkMe.cminsertNode("Cow"); linkMe.cminsertNode("Ran"); linkMe.cminsertNode("Pig"); linkMe.cminsertNode("Away"); linkMe.cmlistList(); cout << endl; linkMe.cmremoveNode("The"); linkMe.cmremoveNode("Cow"); linkMe.cmremoveNode("Away"); linkMe.cmlistList(); return 0; } LinkedList code: /* * LinkedList.h * Lab 6 * * Created by Anthony Glyadchenko on 3/22/10. * Copyright 2010 __MyCompanyName__. All rights reserved. * */ #include <stdio.h> #include <iostream> #include <fstream> #include <iomanip> using namespace std; class ctNode { friend class ctlinkList ; // friend class allowed to access private data private: string sfileWord ; // used to allocate and store input word int iwordCnt ; // number of word occurrances ctNode* ctpnext ; // point of Type Node, points to next link list element }; class ctlinkList { private: ctNode* ctphead ; // initialized by constructor public: ctlinkList () { ctphead = NULL ; } ctNode* gethead () { return ctphead ; } string cminsertNode (string svalue) { ctNode* ctptmpHead = ctphead ; if ( ctphead == NULL ) { // allocate new and set head ctptmpHead = ctphead = new ctNode ; ctphead -> ctpnext = NULL ; ctphead -> sfileWord = svalue ; } else { //find last ctnode do { if ( ctptmpHead -> ctpnext != NULL ) ctptmpHead = ctptmpHead -> ctpnext ; } while ( ctptmpHead -> ctpnext != NULL ) ; // fall thru found last node ctptmpHead -> ctpnext = new ctNode ; ctptmpHead = ctptmpHead -> ctpnext ; ctptmpHead -> ctpnext = NULL; ctptmpHead -> sfileWord = svalue ; } return ctptmpHead -> sfileWord ; } string cmreturnNode (string svalue) { return NULL; } string cmremoveNode (string svalue) { int counter = 0; ctNode *tmpHead = ctphead; if (ctphead == NULL) return NULL; while (tmpHead->sfileWord != svalue && tmpHead->ctpnext != NULL){ tmpHead = tmpHead->ctpnext; counter++; } do{ tmpHead->sfileWord = tmpHead->ctpnext->sfileWord; tmpHead = tmpHead->ctpnext; } while (tmpHead->ctpnext != NULL); return tmpHead->sfileWord; } string cmlistList () { string tempList; ctNode *tmpHead = ctphead; if (ctphead == NULL){ return NULL; } else{ while (tmpHead != NULL){ cout << tmpHead->sfileWord << " "; tempList += tmpHead->sfileWord; tmpHead = tmpHead -> ctpnext; } } return tempList; } }; Why is this happening?

Read the article

Looking for best practise for writing a serial device communication app in C#

- by cdotlister

I am pretty new to serial comms, but would like advise on how to best achieve a robust application which speak to and listens to a serial device. I have managed to make use of System.IO.serialport, and successfully connected to, sent data to and recieved from my device. The way things work is this. My application connects to the Com Port and opens the port.... I then connect my device to the com port, and it detects a connectio to the PC, so sends a bit of text. it's really just copyright info, as well as the version of the firmware. I don't do anything with that, except display it in my 'activity' window. The device then waits. I can then query information, but sending a command such as 'QUERY PARAMETER1'. It then replies with something like: 'QUERY PARAMETER1\r\n\r\n76767\r\n\r\n' I then process that. I can then update it by sending 'SET PARAMETER1 12345', and it will reply with 'QUERY PARAMETER1\r\n\r\n12345\r\n\r\n'. All pretty basic. So, what I have done is created a Communication Class. this call is called in it's own thread, and sends data back to the main form... and also allows me to send messages to it. Sending data is easy. Recieving is a bit more tricky. I have employed the use of the datarecieved event, and when ever data comes in, I echo that to my screen. My problem is this: When I send a command, I feel I am being very dodgy in my handling. What I am doing is, lets say I am sending 'QUERY PARAMETER1'. I send the command to the device, I then put 'PARAMETER1' into a global variable, and I do a Thread.Sleep(100). On the data recieved, I then have a bit of logic that checks the incoming data, and sees if the string CONTAINS the value in the gloabl variable. As the reply may be 'QUERY PARAMETER1\r\n\r\n76767\r\n\r\n', it sees that it contains my parameter, parses the string, and returns the value I am looking for, but placing it into another global variable. My sending method was sleeping for 100ms. It then wakes, and checks the returned global variable. If it has data... then I'm happy, and I process the data. Problem is... if the sleep is too short.. it will fail. And I feel it's flakey.. putting stuff into variables.. then waiting... The other option is to use ReadLine instead, but that's very blocking. So I remove the datarecieved method, and instead... just send the data... then call ReadLine(). That may give me better results. There's no time, except when we connect initially, that data comes from the device, without me requesting it. So, maybe readline will be simpler and safer? Is this known as 'Blocking' reads? Also, can I set a timeout? Hopefully someone can guide me.

Read the article

UITextView doesn't not resize when keyboard appear if loaded from a tab bar cotroller

- by elio.d

I have a simple view controller (SecondViewController) used to manage a UITextview (I'm building a simple editor) this is the code of the SecondViewController.h @interface SecondViewController : UIViewController { IBOutlet UITextView *textView; } @property (nonatomic,retain) IBOutlet UITextView *textView; @end and this is the SecondViewController.m // // EditorViewController.m // Editor // // Created by elio d'antoni on 13/01/11. // Copyright 2011 none. All rights reserved. // @implementation SecondViewController @synthesize textView; /* // Implement loadView to create a view hierarchy programmatically, without using a nib. - (void)loadView { } */ // Implement viewDidLoad to do additional setup after loading the view, typically from a nib. - (void)viewDidLoad { [super viewDidLoad]; self.view.backgroundColor = [UIColor colorWithPatternImage:[UIImage imageNamed:@"uiViewBg.png"]]; textView.layer.borderWidth=1; textView.layer.cornerRadius=5; textView.layer.borderColor=[[UIColor darkGrayColor] CGColor]; [[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(keyboardWillAppear:) name:UIKeyboardWillShowNotification object:nil]; [[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(keyboardWillDisappear:) name:UIKeyboardWillHideNotification object:nil]; } -(void) matchAnimationTo:(NSDictionary *) userInfo { NSLog(@"match animation method"); [UIView setAnimationDuration:[[userInfo objectForKey:UIKeyboardAnimationDurationUserInfoKey] doubleValue]]; [UIView setAnimationCurve:[[userInfo objectForKey:UIKeyboardAnimationCurveUserInfoKey] intValue]]; } -(CGFloat) keyboardEndingFrameHeight:(NSDictionary *) userInfo { NSLog(@"keyboardEndingFrameHeight method"); CGRect keyboardEndingUncorrectedFrame = [[ userInfo objectForKey:UIKeyboardFrameEndUserInfoKey ] CGRectValue]; CGRect keyboardEndingFrame = [self.view convertRect:keyboardEndingUncorrectedFrame fromView:nil]; return keyboardEndingFrame.size.height; } -(CGRect) adjustFrameHeightBy:(CGFloat) change multipliedBy:(NSInteger) direction { NSLog(@"adjust method"); return CGRectMake(20, 57, self.textView.frame.size.width, self.textView.frame.size.height + change * direction); } -(void)keyboardWillAppear:(NSNotification *)notification { NSLog(@"keyboard appear"); [UIView beginAnimations:nil context:NULL]; [self matchAnimationTo:[notification userInfo]]; self.textView.frame = [self adjustFrameHeightBy:[self keyboardEndingFrameHeight: [notification userInfo]] multipliedBy:-1]; [UIView commitAnimations]; } -(void)keyboardWillDisappear:(NSNotification *) notification { NSLog(@"keyboard disappear"); [UIView beginAnimations:nil context:NULL]; [self matchAnimationTo:[notification userInfo]]; self.textView.frame = [self adjustFrameHeightBy:[self keyboardEndingFrameHeight: [notification userInfo]] multipliedBy:1]; [UIView commitAnimations]; } // Override to allow orientations other than the default portrait orientation. - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { return YES; } (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Release any cached data, images, etc that aren't in use. } (void)viewDidUnload { // Release any retained subviews of the main view. // e.g. self.myOutlet = nil; } (void)dealloc { [super dealloc]; } @end the problem is that if load the view controller from a tab bar controller the textView doesn't resize when the keyboard appear, but the SAME code works if loaded as a single view based app. I hope I was clear enough. I used the tabBar template provided by xcode no modifications.

Read the article

Looking for best practise for writing a serial device communication app

- by cdotlister

I am pretty new to serial comms, but would like advise on how to best achieve a robust application which speak to and listens to a serial device. I have managed to make use of System.IO.SerialPort, and successfully connected to, sent data to and recieved from my device. The way things work is this. My application connects to the Com Port and opens the port.... I then connect my device to the com port, and it detects a connection to the PC, so sends a bit of text. it's really just copyright info, as well as the version of the firmware. I don't do anything with that, except display it in my 'activity' window. The device then waits. I can then query information, but sending a command such as 'QUERY PARAMETER1'. It then replies with something like: 'QUERY PARAMETER1\r\n\r\n76767\r\n\r\n' I then process that. I can then update it by sending 'SET PARAMETER1 12345', and it will reply with 'QUERY PARAMETER1\r\n\r\n12345\r\n\r\n'. All pretty basic. So, what I have done is created a Communication Class. this call is called in it's own thread, and sends data back to the main form... and also allows me to send messages to it. Sending data is easy. Recieving is a bit more tricky. I have employed the use of the datarecieved event, and when ever data comes in, I echo that to my screen. My problem is this: When I send a command, I feel I am being very dodgy in my handling. What I am doing is, lets say I am sending 'QUERY PARAMETER1'. I send the command to the device, I then put 'PARAMETER1' into a global variable, and I do a Thread.Sleep(100). On the data received, I then have a bit of logic that checks the incoming data, and sees if the string CONTAINS the value in the global variable. As the reply may be 'QUERY PARAMETER1\r\n\r\n76767\r\n\r\n', it sees that it contains my parameter, parses the string, and returns the value I am looking for, but placing it into another global variable. My sending method was sleeping for 100ms. It then wakes, and checks the returned global variable. If it has data... then I'm happy, and I process the data. Problem is... if the sleep is too short.. it will fail. And I feel it's flaky.. putting stuff into variables.. then waiting... The other option is to use ReadLine instead, but that's very blocking. So I remove the data received method, and instead... just send the data... then call ReadLine(). That may give me better results. There's no time, except when we connect initially, that data comes from the device, without me requesting it. So, maybe ReadLine will be simpler and safer? Is this known as 'Blocking' reads? Also, can I set a timeout? Hopefully someone can guide me.

Read the article

hello-1.mod.c:14: warning: missing initializer (near initialization for '__this_module.arch.unw_sec_init')

- by Sompom

I am trying to write a module for an sbc1651. Since the device is ARM, this requires a cross-compile. As a start, I am trying to compile the "Hello Kernel" module found here. This compiles fine on my x86 development system, but when I try to cross-compile I get the below error. /home/developer/HelloKernel/hello-1.mod.c:14: warning: missing initializer /home/developer/HelloKernel/hello-1.mod.c:14: warning: (near initialization for '__this_module.arch.unw_sec_init') Since this is in the .mod.c file, which is autogenerated I have no idea what's going on. The mod.c file seems to be generated by the module.h file. As far as I can tell, the relevant parts are the same between my x86 system's module.h and the arm kernel header's module.h. Adding to my confusion, this problem is either not googleable (by me...) or hasn't happened to anyone before. Or I'm just doing something clueless that anyone with any sense wouldn't do. The cross-compiler I'm using was supplied by Freescale (I think). I suppose it could be a problem with the compiler. Would it be worth trying to build the toolchain myself? Obviously, since this is a warning, I could ignore it, but since it's so strange, I am worried about it, and would like to at least know the cause... Thanks very much, Sompom Here are the source files hello-1.mod.c #include <linux/module.h> #include <linux/vermagic.h> #include <linux/compiler.h> MODULE_INFO(vermagic, VERMAGIC_STRING); struct module __this_module __attribute__((section(".gnu.linkonce.this_module"))) = { .name = KBUILD_MODNAME, .init = init_module, #ifdef CONFIG_MODULE_UNLOAD .exit = cleanup_module, #endif .arch = MODULE_ARCH_INIT, }; static const struct modversion_info ____versions[] __used __attribute__((section("__versions"))) = { { 0x3972220f, "module_layout" }, { 0xefd6cf06, "__aeabi_unwind_cpp_pr0" }, { 0xea147363, "printk" }, }; static const char __module_depends[] __used __attribute__((section(".modinfo"))) = "depends="; hello-1.c (modified slightly from the given link) /* hello-1.c - The simplest kernel module. * * Copyright (C) 2001 by Peter Jay Salzman * * 08/02/2006 - Updated by Rodrigo Rubira Branco <[email protected]> */ /* Kernel Programming */ #ifndef MODULE #define MODULE #endif #ifndef LINUX #define LINUX #endif #ifndef __KERNEL__ #define __KERNEL__ #endif #include <linux/module.h> /* Needed by all modules */ #include <linux/kernel.h> /* Needed for KERN_ALERT */ static int hello_init_module(void) { printk(KERN_ALERT "Hello world 1.\n"); /* A non 0 return means init_module failed; module can't be loaded.*/ return 0; } static void hello_cleanup_module(void) { printk(KERN_ALERT "Goodbye world 1.\n"); } module_init(hello_init_module); module_exit(hello_cleanup_module); MODULE_LICENSE("GPL"); Makefile export ARCH:=arm export CCPREFIX:=/opt/freescale/usr/local/gcc-4.4.4-glibc-2.11.1-multilib-1.0/arm-fsl-linux-gnueabi/bin/arm-linux- export CROSS_COMPILE:=${CCPREFIX} TARGET := hello-1 WARN := -W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wno-sign-compare -Wno-unused -Werror UNUSED_FLAGS := -std=c99 -pedantic EXTRA_CFLAGS := -O2 -DMODULE -D__KERNEL__ ${WARN} ${INCLUDE} KDIR ?= /home/developer/src/ltib-microsys/ltib/rpm/BUILD/linux-2.6.35.3 ifneq ($(KERNELRELEASE),) # kbuild part of makefile obj-m := $(TARGET).o else # normal makefile default: clean $(MAKE) -C $(KDIR) M=$$PWD .PHONY: clean clean: -rm built-in.o -rm $(TARGET).ko -rm $(TARGET).ko.unsigned -rm $(TARGET).mod.c -rm $(TARGET).mod.o -rm $(TARGET).o -rm modules.order -rm Module.symvers endif

Read the article

Why do I get an extra newline in the middle of a UTF-8 character with XML::Parser?

- by René Nyffenegger

I encountered a problem dealing with UTF-8, XML and Perl. The following is the smallest piece of code and data in order to reproduce the problem. Here's an XML file that needs to be parsed: <?xml version="1.0" encoding="utf-8"?> <test> <words>???????????? ??????? ????????? ???? ???????????? ??????</words> <words>???????????? ??????? ????????? ???? ???????????? ??????</words> <words>???????????? ??????? ????????? ???? ???????????? ??????</words> [<words> .... </words> 148 times repeated] <words>???????????? ??????? ????????? ???? ???????????? ??????</words> <words>???????????? ??????? ????????? ???? ???????????? ??????</words> </test> The parsing is done with this perl script: use warnings; use strict; use XML::Parser; use Data::Dump; my $in_words = 0; my $xml_parser=new XML::Parser(Style=>'Stream'); $xml_parser->setHandlers ( Start => \&start_element, End => \&end_element, Char => \&character_data, Default => \&default); open OUT, '>out.txt'; binmode (OUT, ":utf8"); open XML, 'xml_test.xml' or die; $xml_parser->parse(*XML); close XML; close OUT; sub start_element { my($parseinst, $element, %attributes) = @_; if ($element eq 'words') { $in_words = 1; } else { $in_words = 0; } } sub end_element { my($parseinst, $element, %attributes) = @_; if ($element eq 'words') { $in_words = 0; } } sub default { # nothing to see here; } sub character_data { my($parseinst, $data) = @_; if ($in_words) { if ($in_words) { print OUT "$data\n"; } } } When the script is run, it produces the out.txt file. The problem is in this file on line 147. The 22th character (which in utf-8 consists of \xd6 \xb8) is split between the d6 and b8 with a new line. This should not happen. Now, I am interested if someone else has this problem or can reproduce it. And why I am getting this problem. I am running this script on Windows: C:\temp>perl -v This is perl, v5.10.0 built for MSWin32-x86-multi-thread (with 5 registered patches, see perl -V for more detail) Copyright 1987-2007, Larry Wall Binary build 1003 [285500] provided by ActiveState http://www.ActiveState.com Built May 13 2008 16:52:49

Read the article

Facelet components layouts and javascript

- by Java Drinker

Hi all, I have a question regarding the placement of javascript within facelet components. This is more regarding best practice/style than a programming issue, but I feel like all the solutions I have thought of have been hacks at best. Ok here is my scenario: I have a facelet template like so (my faces, and apache Trinidad)... <ui:composition> <f:view locale="#{myLocale}"> <ui:insert name="messageBundles" /> <tr:document mode="strict" styleClass="coolStyleDoc"> <f:facet name="metaContainer">  <tr:group>  <ui:insert name="metaData" /> </tr:group> </f:facet> <tr:form usesUpload="#{empty usesUpload ? 'false' : usesUpload}"> <div id="formTemplateHeader"> <ui:insert name="contentHeader" /> </div> <div id="formTemplateContentContainer"> <div id="formTemplateContent"> <ui:insert name="contentBody" /> </div> </div> <div id="formTemplateFooter"> <ui:insert name="contentFooter"> </ui:insert> </div> </tr:form>  Now, a facelet that wants to use this template would look like the following: <ui:composition template="/path/to/my/template.jspx"> <ui:define name="bundles"> <custom:loadBundle basename="messagesStuff" var="bundle" /> </ui:define> <ui:define name="metaData"> <script>  </script> </ui:define> <ui:define name="contentHeader">  </ui:define> <ui:define name="contentBody">  </ui:define> <ui:define name="contentFooter">  </ui:define> </ui:composition> All this works quite well, but the problem I have is when I want to use a facelet component inside this page. If the facelet component has its own javascript code (jQuery stuff etc), how can I make it so that that javascript code is included in the header section of the generated html? Any help would be appreciated. Please let me know if this is not clear or something... thanks in advance

Read the article

Perl kill(0, $pid) in Windows always returning 1

- by banshee_walk_sly

I'm trying to make a Perl script that will run a set of other programs in Windows. I need to be able to capture the stdout, stderr, and exit code of the process, and I need to be able to see if a process exceeds it's allotted execution time. Right now, the pertinent part of my code looks like: ... $pid = open3($wtr, $stdout, $stderr, $command); if($time < 0){ waitpid($pid, 0); $return = $? >> 8; $death_sig = $? & 127; $core_dump = $? & 128; } else{ # Do timeout stuff, currently not working as planned print "pid: $pid\n"; my $elapsed = 0; #THIS LOOP ONLY TERMINATES WHEN $time > $elapsed ...? while(kill 0, $pid and $time > $elapsed){ Time::HiRes::usleep(1000); # sleep for milliseconds $elapsed += 1; $return = $? >> 8; $death_sig = $? & 127; $core_dump = $? & 128; } if($elapsed >= $time){ $status = "FAIL"; print $log "TIME LIMIT EXCEEDED\n"; } } #these lines are needed to grab the stdout and stderr in arrays so # I may reuse them in multiple logs if(fileno $stdout){ @stdout = <$stdout>; } if(fileno $stderr){ @stderr = <$stderr>; } ... Everything is working correctly if $time = -1 (no timeout is needed), but the system thinks that kill 0, $pid is always 1. This makes my loop run for the entirety of the time allowed. Some extra details just for clarity: This is being run on Windows. I know my process does terminate because I have get all the expected output. Perl version: This is perl, v5.10.1 built for MSWin32-x86-multi-thread (with 2 registered patches, see perl -V for more detail) Copyright 1987-2009, Larry Wall Binary build 1007 [291969] provided by ActiveState http://www.ActiveState.com Built Jan 26 2010 23:15:11 I appreciate your help :D For that future person who may have a similar issue I got the code to work, here is the modified code sections: $pid = open3($wtr, $stdout, $stderr, $command); close($wtr); if($time < 0){ waitpid($pid, 0); } else{ print "pid: $pid\n"; my $elapsed = 0; while(waitpid($pid, WNOHANG) <= 0 and $time > $elapsed){ Time::HiRes::usleep(1000); # sleep for milliseconds $elapsed += 1; } if($elapsed >= $time){ $status = "FAIL"; print $log "TIME LIMIT EXCEEDED\n"; } } $return = $? >> 8; $death_sig = $? & 127; $core_dump = $? & 128; if(fileno $stdout){ @stdout = <$stdout>; } if(fileno $stderr){ @stderr = <$stderr>; } close($stdout); close($stderr);

Read the article

UIScrollView message handler

- by cs221313

Hi, all, I want to create a scroll view and put thumbnail view in that scroll view. but I can not get the touchBegan message in my program. My source code is like following. - (void)viewDidLoad { [super viewDidLoad]; NSError* error; NSString *bundleRoot = [[NSBundle mainBundle] bundlePath]; dirContents = [[[NSFileManager defaultManager] contentsOfDirectoryAtPath:bundleRoot error: &error] copy]; scrollView = [[UIScrollView alloc] initWithFrame:[[self view] bounds]]; scrollView.pagingEnabled = YES; scrollView.showsHorizontalScrollIndicator = NO; scrollView.userInteractionEnabled = YES; scrollView.clipsToBounds = YES; // default is NO, we want to restrict drawing within our scrollview scrollView.scrollEnabled = YES; [scrollView setDelegate:self]; [[self view] addSubview:scrollView]; DLog(@"scroll frame top = %d, left = %d, width = %d, height = %d", scrollView.frame.origin.x, scrollView.frame.origin.y, scrollView.frame.size.width, scrollView.frame.size.height); int i, j; UIView* onePageView = [[UIView alloc] init]; int pageNumber = 0; int iconNumber = 0; for (NSString *tString in dirContents) { if ([tString hasSuffix:@"_chess.png"]) { if(iconNumber == 9) { onePageView.tag = pageNumber + 1; [scrollView addSubview: onePageView]; onePageView = [[UIView alloc] init]; pageNumber++; iconNumber = 0; } j = iconNumber % 3; i = iconNumber / 3; const float WIDTH = 150.0; const float HEIGHT = 150.0; CGRect imageRect = CGRectMake(j * 200 + 50.0, i * 200 + 50.0, WIDTH, HEIGHT); //remove the charactors of "_chess.png". NSString* sgfName = [tString substringToIndex: tString.length - 10]; sgfName = [sgfName stringByAppendingString: @".sgf"]; ThumbnailView *thumbnailImage = [[ThumbnailView alloc] initWithFilename: sgfName frame: imageRect]; thumbnailImage.delegate = self; [thumbnailImage setImage:[UIImage imageNamed: tString]]; thumbnailImage.opaque = YES; // explicitly opaque for performance //[self.view addSubview:thumbnailImage]; [onePageView addSubview:thumbnailImage]; [thumbnailImage release]; iconNumber++; } } pageControl.numberOfPages = pageNumber + 1; pageControl.currentPage = 0; onePageView.tag = pageNumber + 1; [scrollView addSubview: onePageView]; [self layoutScrollPages]; } ThumbnailView class is like following. // // ThumbnailView.m // go // // Created by David Li on 2/18/11. // Copyright 2011 __MyCompanyName__. All rights reserved. // #import "common.h" #import "ThumbnailView.h" #import "ipad_goViewController.h" @implementation ThumbnailView @synthesize delegate; @synthesize sgfName; -(id) initWithFilename: (NSString*)filename frame: (CGRect)frame { sgfName = [[NSString alloc] initWithString: filename]; return [self initWithFrame: frame]; } - (id)initWithFrame:(CGRect)frame { self = [super initWithFrame:frame]; if (self) { // Initialization code. self.userInteractionEnabled = YES; } return self; } - (void)viewDidAppear:(BOOL)animated { [super viewDidAppear:animated]; [self becomeFirstResponder]; } /* refer to http://stackoverflow.com/questions/855095/how-can-i-detect-the-touch-event-of-an-uiimageview */ -(BOOL)canBecomeFirstResponder { return YES; } - (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event { DLog(@"touched"); [[self delegate] loadGame: sgfName]; } /* // Only override drawRect: if you perform custom drawing. // An empty implementation adversely affects performance during animation. - (void)drawRect:(CGRect)rect { // Drawing code. } */ - (void)dealloc { [super dealloc]; } @end I can not catch the touchesBegan message in my program. Can anyone help me? I stucked by this problem by couple days. Thanks so much.

Read the article

Binary operator overloading on a templated class (C++)

- by GRB

Hi all, I was recently trying to gauge my operator overloading/template abilities and as a small test, created the Container class below. While this code compiles fine and works correctly under MSVC 2008 (displays 11), both MinGW/GCC and Comeau choke on the operator+ overload. As I trust them more than MSVC, I'm trying to figure out what I'm doing wrong. Here is the code: #include <iostream> using namespace std; template <typename T> class Container { friend Container<T> operator+ <> (Container<T>& lhs, Container<T>& rhs); public: void setobj(T ob); T getobj(); private: T obj; }; template <typename T> void Container<T>::setobj(T ob) { obj = ob; } template <typename T> T Container<T>::getobj() { return obj; } template <typename T> Container<T> operator+ <> (Container<T>& lhs, Container<T>& rhs) { Container<T> temp; temp.obj = lhs.obj + rhs.obj; return temp; } int main() { Container<int> a, b; a.setobj(5); b.setobj(6); Container<int> c = a + b; cout << c.getobj() << endl; return 0; } This is the error Comeau gives: Comeau C/C++ 4.3.10.1 (Oct 6 2008 11:28:09) for ONLINE_EVALUATION_BETA2 Copyright 1988-2008 Comeau Computing. All rights reserved. MODE:strict errors C++ C++0x_extensions "ComeauTest.c", line 27: error: an explicit template argument list is not allowed on this declaration Container<T> operator+ <> (Container<T>& lhs, Container<T>& rhs) ^ 1 error detected in the compilation of "ComeauTest.c". I'm having a hard time trying to get Comeau/MingGW to play ball, so that's where I turn to you guys. It's been a long time since my brain has melted this much under the weight of C++ syntax, so I feel a little embarrassed ;). Thanks in advance. EDIT: Eliminated an (irrelevant) lvalue error listed in initial Comeau dump.

Read the article

Setting background image in asp.net (Master page)

- by JRC

I'm new in asp.net. And I am having trouble setting my background image. Here's the master page source: <%@ Master Language="C#" AutoEventWireup="true" CodeFile="Master.master.cs" Inherits="Master"%> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <link rel="stylesheet" type="text/css" href="scripts/style.css"/> <title>Tracker</title> <asp:ContentPlaceHolder id="head" runat="server"> </asp:ContentPlaceHolder> </head> <body> <form id="form1" runat="server"> <div> <div class="container"> <a href="#"><img src="images/cross-header.gif" alt="Insert Logo Here" width="100%" id="Insert_logo" style="background: #C6D580; display:block;" /></a> <div class="sidebar1"> <nav> <ul> <li><a href="#">Home</a></li> <li><a href="#">LINK</a></li> <li><a href="#">LINK</a></li> <li><a href="#"><span style="font-weight:italic">LINK</span></a></li> <li><a href="#"><span style="font-weight:italic">LINK</span></a></li> </ul> </nav> <p>SOME LABEL</p> <p>SOME QUOTE HERE</p> <p></p> </div> </div> <footer> <a href="#">LINK HERE</a> | <a href="#">LINK HERE</a> | <a href="contact.php">CONTACT</a> | <a href="register.php">REGISTER</a> | <a href="login.php">LOGIN</a> <address> Copyright 2012 @JRC </address> </footer> </div> </form> </body> </html> The image that I am trying to use is located at the folder image. I don't know whats wrong. And here's what the style.css source: body { font: 100%/1.4 Verdana, Arial, Helvetica, sans-serif; margin: 0; padding: 0; background-image:url('images/background.jpg'); background-repeat:no-repeat; background-attachment:scroll; background-position:repeat-x; } I also tried this url('image/background.jpeg') etc. but still fails.

Read the article

mine phrases (up to 3 words) from a given text

- by DS_web_developer

I asked before for a simple solution to my problem (using sphinx search service) but I got nowhere... someone has kindly provided me with this code <?php /** * $Project: GeoGraph $ * $Id$ * * GeoGraph geographic photo archive project * This file copyright (C) 2005 Barry Hunter ([email protected]) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /** * Provides the methods for updating the worknet tables * * @package Geograph * @author Barry Hunter <[email protected]> * @version $Revision$ */ function addTwoLetterPhrase($phrase) { global $w2; $w2[$phrase] = (isset($w2[$phrase]))?($w2[$phrase]+1):1; } function addThreeLetterPhrase($phrase) { global $w3; $w3[$phrase] = (isset($w3[$phrase]))?($w3[$phrase]+1):1; } function updateWordnet(&$db,$text,$field,$id) { global $w1,$w2,$w3; $alltext = strtolower(preg_replace('/\W+/',' ',str_replace("'",'',$text))); if (strlen($text)< 1) return; $words = preg_split('/ /',$alltext); $w1 = array(); $w2 = array(); $w3 = array(); //build a list of one word phrases foreach ($words as $word) { $w1[$word] = (isset($w1[$word]))?($w1[$word]+1):1; } //build a list of two word phrases $text = $alltext; $text = preg_replace('/(\w+) (\w+)/e','addTwoLetterPhrase("$1 $2")',$text); $text = $alltext; $text = preg_replace('/(\w+)/','',$text,1); $text = preg_replace('/(\w+) (\w+)/e','addTwoLetterPhrase("$1 $2")',$text); //build a list of three word phrases $text = $alltext; $text = preg_replace('/(\w+) (\w+) (\w+)/e','addThreeLetterPhrase("$1 $2 $3")',$text); $text = $alltext; $text = preg_replace('/(\w+)/','',$text,1); $text = preg_replace('/(\w+) (\w+) (\w+)/e','addThreeLetterPhrase("$1 $2 $3")',$text); $text = $alltext; $text = preg_replace('/(\w+) (\w+)/','',$text,1); $text = preg_replace('/(\w+) (\w+) (\w+)/e','addThreeLetterPhrase("$1 $2 $3")',$text); foreach ($w1 as $word=>$count) { $db->Execute("insert into wordnet1 set gid = $id,words = '$word',$field = $count");// ON DUPLICATE KEY UPDATE $field=$field+$count"); } foreach ($w2 as $word=>$count) { $db->Execute("insert into wordnet2 set gid = $id,words = '$word',$field = $count"); } foreach ($w3 as $word=>$count) { $db->Execute("insert into wordnet3 set gid = $id,words = '$word',$field = $count"); } } ?> It works fine and does almost exactly what I need....... except.... it is not utf8 friendly... I mean... it splits whole words into parts (on special chars) where it shouldn't! so my guess is I should use multibyte functions instead of regular preg_replace... I tried to replace preg_replace with mb_ereg_replace but it is not working as it should... at least not for 2 and 3 words phrases any ideas?

Read the article

??GoldenGate Replicat?HANDLECOLLISIONS??

- by Liu Maclean(???)

HANDLECOLLISIONS?????goldengate????????REPLICAT??,???????????????????,???????????????????????????,??????????????????????????reperror????????discard??,????????????????,??????(????error mapping????,???????discard??),??????????????;?????????????????,????????? ??HANDLECOLLISIONS?????: target??delete??(missing delete),??????????discardfile target??update??(missing update) ????????=» update???INSERT ,???????????? ?????????=» ??????????discardfile ????????????target??,???replicat???UPDATE?????????????? ??1 target??delete??(missing delete) : C:\Users\ML>sqlplus / as sysdba SQL*Plus: Release 11.2.0.3.0 Production on Tue Sep 18 13:38:03 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, OLAP, Data Mining and Real Application Testing options SQL> conn sender/oracle Connected. SQL> create table handlec(t1 int primary key,t2 int); Table created. SQL> insert into handlec values(1,2); 1 row created. SQL> insert into handlec values(3,2); 1 row created. SQL> insert into handlec values(4,2); 1 row created. SQL> commit; Commit complete. SQL> select * from handlec; T1 T2 ---------- ---------- 1 2 3 2 4 2 target : SQL> conn receiver/oracle Connected. SQL> create table handlec(t1 int primary key,t2 int); Table created. SQL> insert into handlec values(1,2); 1 row created. SQL> commit; SQL> select * from handlec; T1 T2 ---------- ---------- 1 2 SQL> GGSCI (XIANGBLI-CN) 1> alter extract load2 , begin now EXTRACT altered. GGSCI (XIANGBLI-CN) 4> alter replicat rep2, begin now REPLICAT altered. GGSCI (XIANGBLI-CN) 13> add trandata sender.* Logging of supplemental redo data enabled for table SENDER.HANDLEC. Logging of supplemental redo log data is already enabled for table SENDER.TV. GGSCI (XIANGBLI-CN) 14> start mgr MGR is already running. GGSCI (XIANGBLI-CN) 15> start er * Sending START request to MANAGER ... EXTRACT LOAD2 starting Sending START request to MANAGER ... REPLICAT REP2 starting GGSCI (XIANGBLI-CN) 16> info all Program Status Group Lag at Chkpt Time Since Chkpt MANAGER RUNNING EXTRACT RUNNING LOAD2 00:00:00 00:00:01 REPLICAT RUNNING REP2 00:00:00 00:00:08 ***SOURCE?????TARGET????? SQL> delete handlec where t1=3; 1 row deleted. SQL> commit; Commit complete. ??SQL error 1403??,REPLICAT ABORT 2012-09-18 13:45:48 WARNING OGG-01004 Aborted grouped transaction on 'RECEIVER.HANDLEC', Database error 1403 (OCI Error ORA-01403: no data found, SQL ). 2012-09-18 13:45:48 WARNING OGG-01003 Repositioning to rba 1091 in seqno 3. 2012-09-18 13:45:48 WARNING OGG-01154 SQL error 1403 mapping SENDER.HANDLEC to RECEIVER.HANDLEC OCI Error ORA-01403: no data found, SQL . 2012-09-18 13:45:48 WARNING OGG-01003 Repositioning to rba 1091 in seqno 3. Source Context : SourceModule : [er.errors] SourceID : [er/errors.cpp] SourceFunction : [take_rep_err_action] SourceLine : [623] ThreadBacktrace : [8] elements : [D:\ogg\V34342-01\gglog.dll(??1CContextItem@@UEAA@XZ+0x3272) [0x000000018010BDD2]] : [D:\ogg\V34342-01\gglog.dll(?_MSG_ERR_MAP_TO_TANDEM_FAILED@@YAPEAVCMessage@@PEAVCSourceContext@@AEBV?$CQualDBObjName@$00@ggapp@gglib@ggs@@1W4MessageDisposition@CMessageFactory@@@Z+0x138) [0x00000001800AD508]] : [D:\ogg\V34342-01\replicat.exe(ERCALLBACK+0x6e1e) [0x0000000140099D5E]] : [D:\ogg\V34342-01\replicat.exe(shutdownMonitoring+0x4411) [0x00000001400C9BE1]] : [D:\ogg\V34342-01\replicat.exe(shutdownMonitoring+0x289cd) [0x00000001400EE19D]] : [D:\ogg\V34342-01\replicat.exe(CommonLexerNewSSD+0x9440) [0x00000001402AE980]] : [C:\windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007733652D]] : [C:\windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007746C521]] 2012-09-18 13:45:48 ERROR OGG-01296 Error mapping from SENDER.HANDLEC to RECEIVER.HANDLEC. *********************************************************************** * ** Run Time Statistics ** * *********************************************************************** Last record for the last committed transaction is the following: ___________________________________________________________________ Trail name : D:\ogg\V34342-01\ex\ze000003 Hdr-Ind : E (x45) Partition : . (x04) UndoFlag : . (x00) BeforeAfter: B (x42) RecLength : 9 (x0009) IO Time : 2012-09-18 13:45:38.000000 IOType : 3 (x03) OrigNode : 255 (xff) TransInd : . (x03) FormatType : R (x52) SyskeyLen : 0 (x00) Incomplete : . (x00) AuditRBA : 44 AuditPos : 3337232 Continued : N (x00) RecCount : 1 (x01) 2012-09-18 13:45:38.000000 Delete Len 9 RBA 1091 Name: SENDER.HANDLEC ___________________________________________________________________ Reading D:\ogg\V34342-01\ex\ze000003, current RBA 1091, 0 records Report at 2012-09-18 13:45:48 (activity since 2012-09-18 13:45:48) From Table SENDER.HANDLEC to RECEIVER.HANDLEC: # inserts: 0 # updates: 0 # deletes: 0 # discards: 1 Last log location read: FILE: D:\ogg\V34342-01\ex\ze000003 SEQNO: 3 RBA: 1091 TIMESTAMP: 2012-09-18 13:45:38.000000 EOF: NO READERR: 0 2012-09-18 13:45:48 ERROR OGG-01668 PROCESS ABENDING. 2012-09-18 13:45:48 INFO OGG-01237 Trace file D:\ogg\V34342-01\REP_TRACE1.TRC closed. 2012-09-18 13:45:48 INFO OGG-01237 Trace file D:\ogg\V34342-01\REP_TRACE2.TRC closed. CACHE OBJECT MANAGER statistics CACHE MANAGER VM USAGE vm current = 0 vm anon queues = 0 vm anon in use = 0 vm file = 0 vm used max = 0 ==> CACHE BALANCED CACHE CONFIGURATION cache size = 2G cache force paging = 3.41G buffer min = 64K buffer highwater = 8M pageout eligible size = 8M ================================================================================ ??skiptransaction???????? GGSCI (XIANGBLI-CN) 18> start rep2 skiptransaction Sending START request to MANAGER ... REPLICAT REP2 starting ??2 target??update??(missing update),???????? : ???????, ??source????????? SQL> update handlec set t1=5 where t1=4; 1 row updated. SQL> commit; Commit complete. ???target ????(miss update)??????? Database error 1403+OGG-01296 2012-09-18 13:49:30 WARNING OGG-01004 Aborted grouped transaction on 'RECEIVER.HANDLEC', Database error 1403 (OCI Error ORA-01403: no data found, SQL <UPDATE "RECEIVER"."HANDLEC" SET "T1" = :a1 WHERE "T1" = :b0>). 2012-09-18 13:49:30 WARNING OGG-01003 Repositioning to rba 1218 in seqno 3. 2012-09-18 13:49:30 WARNING OGG-01003 Repositioning to rba 1218 in seqno 3. Source Context : SourceModule : [er.errors] SourceID : [er/errors.cpp] SourceFunction : [take_rep_err_action] SourceLine : [623] ThreadBacktrace : [8] elements : [D:\ogg\V34342-01\gglog.dll(??1CContextItem@@UEAA@XZ+0x3272) [0x000000018010BDD2]] : [D:\ogg\V34342-01\gglog.dll(?_MSG_ERR_MAP_TO_TANDEM_FAILED@@YAPEAVCMessage@@PEAVCSourceContext@@AEBV?$CQualDBObjName@$00@ggapp@gglib@ggs@@1W4MessageDisposition@CMessageFactory@@@Z+0x138) [0x00000001800AD508]] : [D:\ogg\V34342-01\replicat.exe(ERCALLBACK+0x6e1e) [0x0000000140099D5E]] : [D:\ogg\V34342-01\replicat.exe(shutdownMonitoring+0x4411) [0x00000001400C9BE1]] : [D:\ogg\V34342-01\replicat.exe(shutdownMonitoring+0x289cd) [0x00000001400EE19D]] : [D:\ogg\V34342-01\replicat.exe(CommonLexerNewSSD+0x9440) [0x00000001402AE980]] : [C:\windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007733652D]] : [C:\windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007746C521]] 2012-09-18 13:49:30 ERROR OGG-01296 Error mapping from SENDER.HANDLEC to RECEIVER.HANDLEC. ??HANDLECOLLISIONS?,rep??????????discard?? GGSCI (XIANGBLI-CN) 23> view params rep2 replicat rep2 userid receiver , password oracle trace ./rep_trace1.trc trace2 ./rep_trace2.trc ASSUMETARGETDEFS HANDLECOLLISIONS map sender.*, target receiver.*; GGSCI (XIANGBLI-CN) 18> start rep2 SQL> select * from handlec; T1 T2 ---------- ---------- 1 2 5 ????T1=5 T2 NULL?????? ,??update?????????????,??replicat??????????????update????????????????,?????T2 ?NULL ,????????????EXTRACT??PKUPDATE??? ????????FETCHOPTIONS FETCHPKUPDATECOLS ????????EXTRACT?????,???EXTRACT? ????extract???????????? ??????: SQL> conn receiver/oracle Connected. SQL> select * from handlec; T1 T2 ---------- ---------- 1 2 10 100 5 20 200 SQL> delete handlec where t1=5; 1 row deleted. SQL> commit; Commit complete. SQL> select * from handlec; T1 T2 ---------- ---------- 1 2 10 100 20 200 SQL> conn sender/oracle Connected. SQL> update handlec set t1=t1+1000 where t1=5; 1 row updated. SQL> commit; Commit complete. SQL> conn receiver/oracle Connected. SQL> SQL> SQL> select * from handlec; T1 T2 ---------- ---------- 1 2 10 100 20 200 1005 2 ???????FETCHOPTIONS FETCHPKUPDATECOLS??????redo image???trail?,????primary key?????HANDLECOLLISIONS????target??????????? ??3 ????????????target??,???replicat???UPDATE??????????????: *** TARGET SQL> conn receiver/oracle Connected. SQL> select * from handlec; T1 T2 ---------- ---------- 1 2 10 9 5 target????? t1=10 t2=9??? ,????source???(10,100)??? >>SOURCE SQL> insert into handlec values(10,100); 1 row created. SQL> commit; >>TARGET SQL> select * from handlec; T1 T2 ---------- ---------- 1 2 10 100 5 ???????source?insert??,???target???????????????HANDLECOLLISIONS?REPLICAT???UPDATE??????COLUMNS ?? HANDLECOLLISIONS?????goldengate????????REPLICAT??,???????????????????,???????????????????????????,??????????????????????????reperror????????discard??,????????????????,??????,??????????????;?????????????????,????????? ??HANDLECOLLISIONS?????: target??delete??(missing delete),??????????discardfile target??update??(missing update) ????????=» update???INSERT ,???????????? ?????????=» ??????????discardfile ????????????target??,???replicat???UPDATE?????????????? ?:???????????Insert/Delete??,????????????????Replicat?????abend,????? ???????????,??target??HANDLECOLLISIONS??update??,?????INSERT??????,???????????????,FETCHOPTIONS FETCHPKUPDATECOLS??????redo image???trail?,????primary key?????HANDLECOLLISIONS????target??????????? ??????send ??????HANDLECOLLISIONS GGSCI (XIANGBLI-CN) 29> send rep2, NOHANDLECOLLISIONS Sending NOHANDLECOLLISIONS request to REPLICAT REP2 ... REP2 NOHANDLECOLLISIONS set for 1 tables and 0 wildcard entries

Read the article

??OPEN CURSOR?BULK COLLECT

- by Liu Maclean(???)

????T.askmaclean.com?????bulk collect?open cursor???, ????????? ??????: ???? OPEN_CURSOR ????SQL?? ???????. ?????? ????? ???????????????? ????? test_soruce create table zengfankun_temp01 as select * from dba_objects;select count(*) from zengfankun_temp01;–12,6826analyze table zengfankun_temp01 compute statistics; create or replace procedure test_open_cursor istype type_owner is table of zengfankun_temp01.owner%type index by binary_integer;type type_object_name is table of zengfankun_temp01.object_name%type index by binary_integer;type type_object_id is table of zengfankun_temp01.object_id%type index by binary_integer;type type_object_type is table of zengfankun_temp01.object_type%type index by binary_integer;type type_last_ddl_time is table of zengfankun_temp01.last_ddl_time%type index by binary_integer; l_ary_owner type_owner;l_ary_object_name type_object_name;l_ary_object_id type_object_id;l_ary_object_type type_object_type;l_ary_last_ddl_time type_last_ddl_time; cursor cur_object isselect owner,object_name,object_id,object_type,last_ddl_timefrom zengfankun_temp01order by owner,object_name,object_type,last_ddl_time;OPEN_START number;OPEN_END number;FETCH_START number;FETCH_END number;beginDBMS_OUTPUT.ENABLE (buffer_size=>null) ;OPEN_START:=dbms_utility.get_time();open cur_object;OPEN_END :=dbms_utility.get_time();dbms_output.put_line(‘OPEN_TIME:’||TO_CHAR(OPEN_END-OPEN_START));loopFETCH_START:=dbms_utility.get_time();fetch cur_object bulk collect intol_ary_owner,l_ary_object_name,l_ary_object_id,l_ary_object_type,l_ary_last_ddl_timelimit 10000;FETCH_END:=dbms_utility.get_time();dbms_output.put_line(‘FETCH_TIME:’||TO_CHAR(FETCH_END-FETCH_START)||’ ROWCOUNT:’||cur_object%rowCount); exit when cur_object%notfound or cur_object%notfound is null;end loop;end test_open_cursor; OPEN_TIME:12FETCH_TIME:21 ROWCOUNT:10000FETCH_TIME:3 ROWCOUNT:20000FETCH_TIME:3 ROWCOUNT:30000FETCH_TIME:3 ROWCOUNT:40000FETCH_TIME:3 ROWCOUNT:50000FETCH_TIME:3 ROWCOUNT:60000FETCH_TIME:3 ROWCOUNT:70000FETCH_TIME:3 ROWCOUNT:80000FETCH_TIME:3 ROWCOUNT:90000FETCH_TIME:3 ROWCOUNT:100000FETCH_TIME:3 ROWCOUNT:110000FETCH_TIME:3 ROWCOUNT:120000FETCH_TIME:1 ROWCOUNT:126826 ???? OPEN_TIME:0FETCH_TIME:18 ROWCOUNT:10000FETCH_TIME:3 ROWCOUNT:20000FETCH_TIME:3 ROWCOUNT:30000FETCH_TIME:3 ROWCOUNT:40000FETCH_TIME:3 ROWCOUNT:50000FETCH_TIME:3 ROWCOUNT:60000FETCH_TIME:3 ROWCOUNT:70000FETCH_TIME:3 ROWCOUNT:80000FETCH_TIME:3 ROWCOUNT:90000FETCH_TIME:3 ROWCOUNT:100000FETCH_TIME:3 ROWCOUNT:110000FETCH_TIME:3 ROWCOUNT:120000FETCH_TIME:2 ROWCOUNT:126826 SQL?????????, ????????????.??OPEN CURSOR ????0???????????3??.??N? ??????. ???? ?N? ?????????? ??????. ??????????????? ??????????. ?????????10000??? ???????????????????clear???, ???????????: ?OPEN CURSOR ?????, PL/SQL????SQL????PARSE SQL????????, ??????OPEN CURSOR????SNAPSHOT SCN ??SCN, ??Oracle?????FETCH?????,???????????????? ????FETCH ??????????????,???????Current Block, The most recent version of block , ?????SCN >> Snapshot scn, ????UNDO???? ???SCN ???Best Block ,???Read Consistentcy;???? ???UNDO SNAPSHOT???????????????Best Block??,???????ORA-1555??? ????????, ??????????,???????????????char(2000)????, ???????????????,????bulk collect fetch??fetch 10 ???,????????OPEN CURSOR?????PARSE??SQL????????, ??????????fetch bulk collect??????????10????,??”_trace_pin_time”????Server Process?pin CR block???,??????????Fetch Bulk Collect limit 10??10?buffer?pin? [oracle@nas ~]$ sqlplus / as sysdba SQL*Plus: Release 11.2.0.3.0 Production on Wed Aug 1 11:36:52 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, OLAP, Data Mining and Real Application Testing options SQL> select * from global_name; GLOBAL_NAME -------------------------------------------------------------------------------- http://www.askmaclean.com SQL> create table maclean (t1 char(2000)) tablespace users pctfree 99; Table created. SQL> begin 2 for i in 1..200 loop 3 insert into maclean values('MACLEAN'); 4 commit ; 5 end loop; 6 end; 7 / PL/SQL procedure successfully completed. SQL> exec dbms_stats.gather_table_stats('','MACLEAN'); PL/SQL procedure successfully completed. SQL> select count(*) from maclean; COUNT(*) ---------- 200 SQL> select blocks,num_rows from dba_tables where table_name='MACLEAN'; BLOCKS NUM_ROWS ---------- ---------- 244 200 SQL> alter system set "_trace_pin_time"=1 scope=spfile; System altered. SQL> startup force; ORACLE instance started. Total System Global Area 3140026368 bytes Fixed Size 2232472 bytes Variable Size 1795166056 bytes Database Buffers 1325400064 bytes Redo Buffers 17227776 bytes Database mounted. Database opened. SQL> alter session set events '10046 trace name context forever,level 12'; Session altered. SQL> SQL> SQL> declare 2 cursor v_cursor is 3 select * from sys.maclean; 4 type v_type is table of sys.maclean%rowtype index by binary_integer; 5 rec_tab v_type; 6 begin 7 open v_cursor; 8 dbms_lock.sleep(30); 9 loop 10 fetch v_cursor bulk collect 11 into rec_tab limit 10; 12 dbms_lock.sleep(10); 13 exit when v_cursor%notfound; 14 end loop; 15 end; 16 / ?????10046 trace+ pin trace: PARSING IN CURSOR #47499559136872 len=337 dep=0 uid=0 oct=47 lid=0 tim=1343836146412056 hv=496860239 ad='11a11dbb0' sqlid='4zh7954ftuz2g' declare cursor v_cursor is select * from sys.maclean; type v_type is table of sys.maclean%rowtype index by binary_integer; rec_tab v_type; begin open v_cursor; dbms_lock.sleep(30); loop fetch v_cursor bulk collect into rec_tab limit 10; dbms_lock.sleep(10); exit when v_cursor%notfound; end loop; end; END OF STMT PARSE #47499559136872:c=0,e=346,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=0,tim=1343836146412051 ===================== PARSING IN CURSOR #47499559126280 len=25 dep=1 uid=0 oct=3 lid=0 tim=1343836146414939 hv=3296884535 ad='11a11d250' sqlid='2mb1493284xtr' SELECT * FROM SYS.MACLEAN END OF STMT PARSE #47499559126280:c=1999,e=2427,p=0,cr=0,cu=0,mis=1,r=0,dep=1,og=1,plh=2568761675,tim=1343836146414937 EXEC #47499559126280:c=0,e=55,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=1,plh=2568761675,tim=1343836146415104 ????? ? SELECT * FROM SYS.MACLEAN? PARSE ????? , ????FETCH???????pin ????????, ????OPEN CURSOR????? *** 2012-08-01 11:49:36.424 WAIT #47499559136872: nam='PL/SQL lock timer' ela= 30009361 duration=0 p2=0 p3=0 obj#=-1 tim=1343836176424782 ???30s pin ktewh26: kteinpscan dba 0x10a6202:4 time 1039048805 pin ktewh27: kteinmap dba 0x10a6202:4 time 1039048847 pin kdswh11: kdst_fetch dba 0x10a6203:1 time 1039048898 pin kdswh11: kdst_fetch dba 0x10a6204:1 time 1039048961 pin kdswh11: kdst_fetch dba 0x10a6205:1 time 1039049004 pin kdswh11: kdst_fetch dba 0x10a6206:1 time 1039049042 pin kdswh11: kdst_fetch dba 0x10a6207:1 time 1039049089 pin kdswh11: kdst_fetch dba 0x10a6208:1 time 1039049123 pin kdswh11: kdst_fetch dba 0x10a6209:1 time 1039049159 pin kdswh11: kdst_fetch dba 0x10a620a:1 time 1039049191 pin kdswh11: kdst_fetch dba 0x10a620b:1 time 1039049225 pin kdswh11: kdst_fetch dba 0x10a620c:1 time 1039049260 kdst_fetch???fetch??????? , ??fetch?10?? ???????FETCH FETCH #47499559126280:c=0,e=536,p=0,cr=12,cu=0,mis=0,r=10,dep=1,og=1,plh=2568761675,tim=1343836176425542 *** 2012-08-01 11:49:46.428 WAIT #47499559136872: nam='PL/SQL lock timer' ela= 10002694 duration=0 p2=0 p3=0 obj#=-1 tim=134383618642829 ????10s pin kdswh11: kdst_fetch dba 0x10a620d:1 time 1049052211 pin kdswh11: kdst_fetch dba 0x10a620e:1 time 1049052264 pin kdswh11: kdst_fetch dba 0x10a620f:1 time 1049052299 pin kdswh11: kdst_fetch dba 0x10a6211:1 time 1049052332 pin kdswh11: kdst_fetch dba 0x10a6212:1 time 1049052364 pin kdswh11: kdst_fetch dba 0x10a6213:1 time 1049052398 pin kdswh11: kdst_fetch dba 0x10a6214:1 time 1049052430 pin kdswh11: kdst_fetch dba 0x10a6215:1 time 1049052462 pin kdswh11: kdst_fetch dba 0x10a6216:1 time 1049052494 pin kdswh11: kdst_fetch dba 0x10a6217:1 time 1049052525 FETCH #47499559126280:c=0,e=371,p=0,cr=10,cu=0,mis=0,r=10,dep=1,og=1,plh=2568761675,tim=1343836186428807 ??pin 10????, ???fetch ?? WAIT #47499559136872: nam='PL/SQL lock timer' ela= 10002864 duration=0 p2=0 p3=0 obj#=-1 tim=1343836196431754 pin kdswh11: kdst_fetch dba 0x10a6218:1 time 1059055662 pin kdswh11: kdst_fetch dba 0x10a6219:1 time 1059055714 pin kdswh11: kdst_fetch dba 0x10a621a:1 time 1059055748 pin kdswh11: kdst_fetch dba 0x10a621b:1 time 1059055781 pin kdswh11: kdst_fetch dba 0x10a621c:1 time 1059055815 pin kdswh11: kdst_fetch dba 0x10a621d:1 time 1059055848 pin kdswh11: kdst_fetch dba 0x10a621e:1 time 1059055883 pin kdswh11: kdst_fetch dba 0x10a621f:1 time 1059055915 pin kdswh11: kdst_fetch dba 0x10a6221:1 time 1059055953 pin kdswh11: kdst_fetch dba 0x10a6222:1 time 1059055992 FETCH #47499559126280:c=0,e=385,p=0,cr=10,cu=0,mis=0,r=10,dep=1,og=1,plh=2568761675,tim=1343836196432274 ???? ??????? DBA????? ............................ ???? WAIT #47499559136872: nam='PL/SQL lock timer' ela= 10002933 duration=0 p2=0 p3=0 obj#=-1 tim=1343836366495589 pin kdswh11: kdst_fetch dba 0x10a62f6:1 time 1229119497 pin kdswh11: kdst_fetch dba 0x10a62f7:1 time 1229119545 pin kdswh11: kdst_fetch dba 0x10a62f8:1 time 1229119576 pin kdswh11: kdst_fetch dba 0x10a62f9:1 time 1229119610 pin kdswh11: kdst_fetch dba 0x10a62fa:1 time 1229119644 pin kdswh11: kdst_fetch dba 0x10a62fb:1 time 1229119671 pin kdswh11: kdst_fetch dba 0x10a62fc:1 time 1229119703 pin kdswh11: kdst_fetch dba 0x10a62fd:1 time 1229119730 pin kdswh11: kdst_fetch dba 0x10a62fe:1 time 1229119760 pin kdswh11: kdst_fetch dba 0x10a62ff:1 time 1229119787 FETCH #47499559126280:c=0,e=340,p=0,cr=10,cu=0,mis=0,r=10,dep=1,og=1,plh=2568761675,tim=1343836366496067 ??????DBA? 0x10a6203 , ??DBA ? 0x10a62ff ???????DBA??MACLEAN????????,???DBA???Maclean????? getbfno?????dba??????????? CREATE OR REPLACE FUNCTION getbfno (p_dba IN VARCHAR2) RETURN VARCHAR2 IS l_str VARCHAR2 (255) DEFAULT NULL; l_fno VARCHAR2 (15); l_bno VARCHAR2 (15); BEGIN l_fno := DBMS_UTILITY.data_block_address_file (TO_NUMBER (LTRIM (p_dba, '0x'), 'xxxxxxxx' ) ); l_bno := DBMS_UTILITY.data_block_address_block (TO_NUMBER (LTRIM (p_dba, '0x'), 'xxxxxxxx' ) ); l_str := 'datafile# is:' || l_fno || CHR (10) || 'datablock is:' || l_bno || CHR (10) || 'dump command:alter system dump datafile ' || l_fno || ' block ' || l_bno || ';'; RETURN l_str; END; / Function created. SQL> select getbfno('0x10a6203') from dual; GETBFNO('0X10A6203') -------------------------------------------------------------------------------- datafile# is:4 datablock is:680451 dump command:alter system dump datafile 4 block 680451; SQL> select getbfno('0x10a62ff') from dual; GETBFNO('0X10A62FF') -------------------------------------------------------------------------------- datafile# is:4 datablock is:680703 dump command:alter system dump datafile 4 block 680703; SQL> select dbms_rowid.rowid_block_number(min(rowid)),dbms_rowid.rowid_relative_fno(min(rowid)) from maclean; DBMS_ROWID.ROWID_BLOCK_NUMBER(MIN(ROWID)) ----------------------------------------- DBMS_ROWID.ROWID_RELATIVE_FNO(MIN(ROWID)) ----------------------------------------- 680451 4 SQL> select dbms_rowid.rowid_block_number(max(rowid)),dbms_rowid.rowid_relative_fno(max(rowid)) from maclean; DBMS_ROWID.ROWID_BLOCK_NUMBER(MAX(ROWID)) ----------------------------------------- DBMS_ROWID.ROWID_RELATIVE_FNO(MAX(ROWID)) ----------------------------------------- 680703 4 ???????3???: 1.?OPEN CURSOR ?????, PL/SQL????SQL????PARSE SQL????????, ??????OPEN CURSOR????SNAPSHOT SCN ??SCN, ??Oracle?????FETCH?????,???????????????? 2.????FETCH ?????????????? 3. ???open cursor+ fetch bulk collect???”?????????”

Read the article

???????,???????????

- by ??-Oracle

Normal 0 7.8 ? 0 2 false false false EN-US ZH-CN X-NONE ??: 1.???????; 2.??????????????????; 3.????????????????,??????????,????????; ??: ?????????: SQL> create table test_b (id number(10)) tablespace bbb; Table created. SQL> insert into test_b values (1); 1 row created. SQL> commit; NAME -------------------------------------------------------------------------------- FILE# ---------- /opt/oracle/oradata/R11203/aaa.dbf 10 /opt/oracle/oradata/R11203/bbb.dbf 11 11 rows selected. SQL> host ??????,?????? bash-4.2$ ls -al /opt/oracle/oradata/R11203/bbb.dbf -rw-rw---- 1 oracle dba 10493952 Apr 4 09:53 /opt/oracle/oradata/R11203/bbb.dbf bash-4.2$ mv /opt/oracle/oradata/R11203/bbb.dbf /opt/oracle/oradata/R11203/bbb.dbf.bak bash-4.2$ sqlplus / as sysdba SQL*Plus: Release 11.2.0.3.0 Production on Fri Apr 4 09:55:03 2014 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, OLAP, Data Mining and Real Application Testing options SQL> alter tablespace bbb read only; alter tablespace bbb read only * ERROR at line 1: ORA-01116: error in opening database file 11 ORA-01110: data file 11: '/opt/oracle/oradata/R11203/bbb.dbf' ORA-27041: unable to open file HPUX-ia64 Error: 2: No such file or directory Additional information: 3 SQL> shutdown immediate; ORA-01116: error in opening database file 11 ORA-01110: data file 11: '/opt/oracle/oradata/R11203/bbb.dbf' ORA-27041: unable to open file HPUX-ia64 Error: 2: No such file or directory Additional information: 3 SQL> select status from v$instance; STATUS ------------ OPEN SQL> alter system switch logfile; System altered. SQL> / System altered. SQL> / System altered. SQL>/ System altered. SQL> / System altered. SQL> / System altered. SQL> ?? SQL> shutdown immediate; ORA-01116: error in opening database file 11 ORA-01110: data file 11: '/opt/oracle/oradata/R11203/bbb.dbf' ORA-27041: unable to open file HPUX-ia64 Error: 2: No such file or directory Additional information: 3 SQL> shutdown abort; ORACLE instance shut down. ???????mount?? SQL> startup mount; ORACLE instance started. Total System Global Area 329859072 bytes Fixed Size 2182336 bytes Variable Size 285213504 bytes Database Buffers 37748736 bytes Redo Buffers 4714496 bytes Database mounted. ??alter database create datafile <> as ....???,???????????: SQL> alter database create datafile 11; Database altered. ???????redo log????????? SQL> recover datafile 11; Media recovery complete. SQL> alter database open; Database altered. SQL> select * from test_b; ID ---------- 1 DefSemiHidden="true" DefQFormat="false" DefPriority="99" LatentStyleCount="267" UnhideWhenUsed="false" QFormat="true" Name="Normal"/ UnhideWhenUsed="false" QFormat="true" Name="heading 1"/ UnhideWhenUsed="false" QFormat="true" Name="Title"/ UnhideWhenUsed="false" QFormat="true" Name="Subtitle"/ UnhideWhenUsed="false" QFormat="true" Name="Strong"/ UnhideWhenUsed="false" QFormat="true" Name="Emphasis"/ UnhideWhenUsed="false" Name="Table Grid"/ UnhideWhenUsed="false" QFormat="true" Name="No Spacing"/ UnhideWhenUsed="false" Name="Light Shading"/ UnhideWhenUsed="false" Name="Light List"/ UnhideWhenUsed="false" Name="Light Grid"/ UnhideWhenUsed="false" Name="Medium Shading 1"/ UnhideWhenUsed="false" Name="Medium Shading 2"/ UnhideWhenUsed="false" Name="Medium List 1"/ UnhideWhenUsed="false" Name="Medium List 2"/ UnhideWhenUsed="false" Name="Medium Grid 1"/ UnhideWhenUsed="false" Name="Medium Grid 2"/ UnhideWhenUsed="false" Name="Medium Grid 3"/ UnhideWhenUsed="false" Name="Dark List"/ UnhideWhenUsed="false" Name="Colorful Shading"/ UnhideWhenUsed="false" Name="Colorful List"/ UnhideWhenUsed="false" Name="Colorful Grid"/ UnhideWhenUsed="false" Name="Light Shading Accent 1"/ UnhideWhenUsed="false" Name="Light List Accent 1"/ UnhideWhenUsed="false" Name="Light Grid Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 1"/ UnhideWhenUsed="false" QFormat="true" Name="List Paragraph"/ UnhideWhenUsed="false" QFormat="true" Name="Quote"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Quote"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 1"/ UnhideWhenUsed="false" Name="Dark List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 1"/ UnhideWhenUsed="false" Name="Colorful List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 1"/ UnhideWhenUsed="false" Name="Light Shading Accent 2"/ UnhideWhenUsed="false" Name="Light List Accent 2"/ UnhideWhenUsed="false" Name="Light Grid Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 2"/ UnhideWhenUsed="false" Name="Dark List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 2"/ UnhideWhenUsed="false" Name="Colorful List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 2"/ UnhideWhenUsed="false" Name="Light Shading Accent 3"/ UnhideWhenUsed="false" Name="Light List Accent 3"/ UnhideWhenUsed="false" Name="Light Grid Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 3"/ UnhideWhenUsed="false" Name="Dark List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 3"/ UnhideWhenUsed="false" Name="Colorful List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 3"/ UnhideWhenUsed="false" Name="Light Shading Accent 4"/ UnhideWhenUsed="false" Name="Light List Accent 4"/ UnhideWhenUsed="false" Name="Light Grid Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 4"/ UnhideWhenUsed="false" Name="Dark List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 4"/ UnhideWhenUsed="false" Name="Colorful List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 4"/ UnhideWhenUsed="false" Name="Light Shading Accent 5"/ UnhideWhenUsed="false" Name="Light List Accent 5"/ UnhideWhenUsed="false" Name="Light Grid Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 5"/ UnhideWhenUsed="false" Name="Dark List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 5"/ UnhideWhenUsed="false" Name="Colorful List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 5"/ UnhideWhenUsed="false" Name="Light Shading Accent 6"/ UnhideWhenUsed="false" Name="Light List Accent 6"/ UnhideWhenUsed="false" Name="Light Grid Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 6"/ UnhideWhenUsed="false" Name="Dark List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 6"/ UnhideWhenUsed="false" Name="Colorful List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 6"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Book Title"/ /* Style Definitions */ table.MsoNormalTable {mso-style-name:????; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.5pt; mso-bidi-font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-font-kerning:1.0pt;}

Read the article

How to fix Ogre3d segfault with std::_Rb_tree_insert_and_rebalance ?

- by Balázs Béla

Hello all. I'm working on a 3d music visualizer using Ogre3d, basically it's a spectrum analizer, a lot like the old xmms plugin: (http)://www.youtube.com/watch?v=_6NKBiwYN24 It works well, the bars are drawn and updated, there are no framerate issues, but it crashes randomly. Sometimes it can run without problems, finish the song, other times it crashes instantly, other times the music just stops, without a crash. Here is the source code for the main class : https://github.com/balazsbela/OgreVisualizer/blob/master/src/VisualizerApplication.cpp#L221 Also the crashes seem to happen less often when I display the framerate overlay from Ogre samples. Would limiting the framerate help ? The crashes are seemingly random. Is it a performance issue ? Please help me out, I'm quite lost on this one, I also posted on Ogre3d forums but I received no responses. (http)://www.ogre3d.org/forums/viewtopic.php?f=2&t=63207 I also tried stackoverflow: (http)://stackoverflow.com/questions/5050147/how-to-fix-ogre3d-segfault-with-std-rb-tree-insert-and-rebalance Thank you. Backtrace: balazsbela@darknet:~/workspace/OgreVisualizer/Release$ gdb OgreVisualizer core GNU gdb (GDB) 7.2-debian Copyright (C) 2010 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i486-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /home/balazsbela/workspace/OgreVisualizer/Release/OgreVisualizer...done. [New Thread 17705] [New Thread 17702] [New Thread 17703] [New Thread 17700] Reading symbols from /usr/lib/libv4l/v4l1compat.so...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libv4l/v4l1compat.so Reading symbols from /usr/local/lib/libOgreMain.so.1.7.1...done. Loaded symbols for /usr/local/lib/libOgreMain.so.1.7.1 Reading symbols from /usr/lib/libfftw3.so.3...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libfftw3.so.3 Reading symbols from /usr/lib/libSDL_sound-1.0.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libSDL_sound-1.0.so.1 Reading symbols from /usr/lib/libSDL-1.2.so.0...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libSDL-1.2.so.0 Reading symbols from /usr/lib/libSDL_mixer-1.2.so.0...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libSDL_mixer-1.2.so.0 Reading symbols from /usr/lib/libOIS-1.2.0.so...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libOIS-1.2.0.so Reading symbols from /usr/lib/libstdc++.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libstdc++.so.6 Reading symbols from /lib/i686/cmov/libm.so.6...Reading symbols from /usr/lib/debug/lib/i686/cmov/libm-2.11.2.so...done. done. Loaded symbols for /lib/i686/cmov/libm.so.6 Reading symbols from /lib/libgcc_s.so.1...(no debugging symbols found)...done. Loaded symbols for /lib/libgcc_s.so.1 Reading symbols from /lib/i686/cmov/libc.so.6...Reading symbols from /usr/lib/debug/lib/i686/cmov/libc-2.11.2.so...done. done. Loaded symbols for /lib/i686/cmov/libc.so.6 Reading symbols from /lib/i686/cmov/libpthread.so.0...Reading symbols from /usr/lib/debug/lib/i686/cmov/libpthread-2.11.2.so...done. done. Loaded symbols for /lib/i686/cmov/libpthread.so.0 Reading symbols from /usr/local/lib/libv4l1.so.0...done. Loaded symbols for /usr/local/lib/libv4l1.so.0 Reading symbols from /usr/lib/libfreetype.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libfreetype.so.6 Reading symbols from /usr/lib/libSM.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libSM.so.6 Reading symbols from /usr/lib/libICE.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libICE.so.6 Reading symbols from /usr/lib/libX11.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libX11.so.6 Reading symbols from /usr/lib/libXext.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXext.so.6 Reading symbols from /usr/lib/libXt.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXt.so.6 Reading symbols from /usr/lib/libXaw.so.7...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXaw.so.7 Reading symbols from /lib/i686/cmov/libdl.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libdl-2.11.2.so...done. done. Loaded symbols for /lib/i686/cmov/libdl.so.2 Reading symbols from /usr/lib/libboost_thread.so.1.42.0...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libboost_thread.so.1.42.0 Reading symbols from /usr/lib/libboost_date_time.so.1.42.0...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libboost_date_time.so.1.42.0 Reading symbols from /usr/lib/libfreeimage.so.3...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libfreeimage.so.3 Reading symbols from /usr/lib/libzzip-0.so.13...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libzzip-0.so.13 Reading symbols from /usr/lib/libz.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libz.so.1 Reading symbols from /usr/lib/libsmpeg-0.4.so.0...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libsmpeg-0.4.so.0 Reading symbols from /usr/lib/libmikmod.so.2...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libmikmod.so.2 Reading symbols from /usr/lib/libvorbis.so.0...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libvorbis.so.0 Reading symbols from /usr/lib/libvorbisfile.so.3...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libvorbisfile.so.3 Reading symbols from /usr/lib/libFLAC.so.8...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libFLAC.so.8 Reading symbols from /usr/lib/libogg.so.0...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libogg.so.0 Reading symbols from /usr/lib/sse2/libspeex.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/sse2/libspeex.so.1 Reading symbols from /usr/lib/libasound.so.2...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libasound.so.2 Reading symbols from /lib/i686/cmov/librt.so.1...Reading symbols from /usr/lib/debug/lib/i686/cmov/librt-2.11.2.so...done. done. Loaded symbols for /lib/i686/cmov/librt.so.1 Reading symbols from /usr/lib/libdirectfb-1.2.so.9...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libdirectfb-1.2.so.9 Reading symbols from /usr/lib/libfusion-1.2.so.9...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libfusion-1.2.so.9 Reading symbols from /usr/lib/libdirect-1.2.so.9...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libdirect-1.2.so.9 Reading symbols from /usr/lib/libvga.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libvga.so.1 Reading symbols from /lib/ld-linux.so.2...Reading symbols from /usr/lib/debug/lib/ld-2.11.2.so...done. done. Loaded symbols for /lib/ld-linux.so.2 Reading symbols from /usr/local/lib/libv4l2.so.0...done. Loaded symbols for /usr/local/lib/libv4l2.so.0 Reading symbols from /lib/libuuid.so.1...(no debugging symbols found)...done. Loaded symbols for /lib/libuuid.so.1 Reading symbols from /usr/lib/libxcb.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libxcb.so.1 Reading symbols from /usr/lib/libXmu.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXmu.so.6 Reading symbols from /usr/lib/libXpm.so.4...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXpm.so.4 Reading symbols from /usr/lib/libjpeg.so.62...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libjpeg.so.62 Reading symbols from /usr/lib/libmng.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libmng.so.1 Reading symbols from /usr/lib/libopenjpeg.so.2...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libopenjpeg.so.2 Reading symbols from /lib/libpng12.so.0...(no debugging symbols found)...done. Loaded symbols for /lib/libpng12.so.0 Reading symbols from /usr/lib/libIlmImf.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libIlmImf.so.6 Reading symbols from /usr/lib/libImath.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libImath.so.6 Reading symbols from /usr/lib/libHalf.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libHalf.so.6 Reading symbols from /usr/lib/libIex.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libIex.so.6 Reading symbols from /usr/lib/libIlmThread.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libIlmThread.so.6 Reading symbols from /lib/libx86.so.1...(no debugging symbols found)...done. Loaded symbols for /lib/libx86.so.1 Reading symbols from /usr/local/lib/libv4lconvert.so.0...done. Loaded symbols for /usr/local/lib/libv4lconvert.so.0 Reading symbols from /usr/lib/libXau.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXau.so.6 Reading symbols from /usr/lib/libXdmcp.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXdmcp.so.6 Reading symbols from /usr/lib/liblcms.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/liblcms.so.1 Reading symbols from /usr/local/lib/OGRE/RenderSystem_GL.so...done. Loaded symbols for /usr/local/lib/OGRE/RenderSystem_GL.so Reading symbols from /usr/lib/libGLU.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libGLU.so.1 Reading symbols from /usr/lib/libGL.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libGL.so.1 Reading symbols from /usr/lib/libXrandr.so.2...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXrandr.so.2 Reading symbols from /usr/lib/libGLcore.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libGLcore.so.1 Reading symbols from /usr/lib/tls/libnvidia-tls.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/tls/libnvidia-tls.so.1 Reading symbols from /usr/lib/libXrender.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXrender.so.1 Reading symbols from /usr/lib/libXcursor.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXcursor.so.1 Reading symbols from /usr/lib/libXfixes.so.3...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXfixes.so.3 Reading symbols from /lib/i686/cmov/libnss_compat.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libnss_compat-2.11.2.so...done. done. Loaded symbols for /lib/i686/cmov/libnss_compat.so.2 Reading symbols from /lib/i686/cmov/libnsl.so.1...Reading symbols from /usr/lib/debug/lib/i686/cmov/libnsl-2.11.2.so...done. done. Loaded symbols for /lib/i686/cmov/libnsl.so.1 Reading symbols from /lib/i686/cmov/libnss_nis.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libnss_nis-2.11.2.so...done. done. Loaded symbols for /lib/i686/cmov/libnss_nis.so.2 Reading symbols from /lib/i686/cmov/libnss_files.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libnss_files-2.11.2.so...done. done. Loaded symbols for /lib/i686/cmov/libnss_files.so.2 Reading symbols from /usr/lib/alsa-lib/libasound_module_rate_speexrate.so...(no debugging symbols found)...done. Loaded symbols for /usr/lib/alsa-lib/libasound_module_rate_speexrate.so Reading symbols from /usr/lib/sse2/libspeexdsp.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/sse2/libspeexdsp.so.1 Core was generated by `./OgreVisualizer'. Program terminated with signal 11, Segmentation fault. #0 0xb6dc563d in std::_Rb_tree_insert_and_rebalance(bool, std::_Rb_tree_node_base*, std::_Rb_tree_node_base*, std::_Rb_tree_node_base&) () from /usr/lib/libstdc++.so.6 (gdb) bt #0 0xb6dc563d in std::_Rb_tree_insert_and_rebalance(bool, std::_Rb_tree_node_base*, std::_Rb_tree_node_base*, std::_Rb_tree_node_base&) () from /usr/lib/libstdc++.so.6 #1 0xb73bb3c2 in std::_Rb_tree<Ogre::Node*, Ogre::Node*, std::_Identity<Ogre::Node*>, std::less<Ogre::Node*>, Ogre::STLAllocator<Ogre::Node*, Ogre::CategorisedAllocPolicy<(Ogre::MemoryCategory)0> > >::_M_insert_(std::_Rb_tree_node_base const*, std::_Rb_tree_node_base const*, Ogre::Node* const&) () from /usr/local/lib/libOgreMain.so.1.7.1 #2 0xb73b5a52 in _M_insert_unique (this=0xb6157ea0, child=0xb616aff8, forceParentUpdate=false) at /usr/include/c++/4.4/bits/stl_tree.h:1182 #3 insert (this=0xb6157ea0, child=0xb616aff8, forceParentUpdate=false) at /usr/include/c++/4.4/bits/stl_set.h:411 #4 Ogre::Node::requestUpdate (this=0xb6157ea0, child=0xb616aff8, forceParentUpdate=false) at /home/balazsbela/Downloads/ogre_src_v1-7-1/OgreMain/src/OgreNode.cpp:805 #5 0xb73b6a40 in Ogre::Node::needUpdate (this=0xb616aff8, forceParentUpdate=92) at /home/balazsbela/Downloads/ogre_src_v1-7-1/OgreMain/src/OgreNode.cpp:789 #6 0xb73b5038 in Ogre::Node::setScale (this=0x1825c, scale=...) at /home/balazsbela/Downloads/ogre_src_v1-7-1/OgreMain/src/OgreNode.cpp:638 #7 0x0805d306 in VisualizerApplication::adjustNodes (this=0x9cd4808) at ../src/VisualizerApplication.cpp:236 #8 0xb6e867f0 in ?? () from /usr/lib/libSDL_mixer-1.2.so.0 #9 0xb6e8719a in ?? () from /usr/lib/libSDL_mixer-1.2.so.0 #10 0xb6ed9b0d in ?? () from /usr/lib/libSDL-1.2.so.0 #11 0xb6ee185e in ?? () from /usr/lib/libSDL-1.2.so.0 #12 0xb6f2e0bd in ?? () from /usr/lib/libSDL-1.2.so.0 #13 0xb6bc7955 in start_thread (arg=0xb198ab70) at pthread_create.c:300 #14 0xb6ca6e7e in clone () at ../sysdeps/unix/sysv/linux/i386/clone.S:130 (gdb) Ogre.log: (http)://pastie.org/1581790

Read the article

Macbook Pro Wireless Reconnecting

- by A Student at a University

I'm using a WPA2 EAP network. I'm sitting next to the access point. The connection keeps dropping and taking ~10 seconds to reconnect. My other devices are staying online. What's causing it? syslog: 01:21:10 dhclient: DHCPREQUEST of XXX.XXX.XXX.XXX on eth1 to XXX.XXX.XXX.XXX port 67 01:21:10 dhclient: DHCPACK of XXX.XXX.XXX.XXX from XXX.XXX.XXX.XXX 01:21:10 NetworkManager[XX40]: <info> (eth1): DHCPv4 state changed reboot -> renew 01:21:10 NetworkManager[XX40]: <info> address XXX.XXX.XXX.XXX 01:21:10 NetworkManager[XX40]: <info> prefix 20 (XXX.XXX.XXX.XXX) 01:21:10 NetworkManager[XX40]: <info> gateway XXX.XXX.XXX.XXX 01:21:10 NetworkManager[XX40]: <info> nameserver 'XXX.XXX.XXX.XXX' 01:21:10 NetworkManager[XX40]: <info> nameserver 'XXX.XXX.XXX.XXX' 01:21:10 NetworkManager[XX40]: <info> nameserver 'XXX.XXX.XXX.XXX' 01:21:10 NetworkManager[XX40]: <info> domain name 'server.domain.tld' 01:21:10 dhclient: bound to XXX.XXX.XXX.XXX -- renewal in XXX seconds. 01:33:30 dhclient: DHCPREQUEST of XXX.XXX.XXX.XXX on eth1 to XXX.XXX.XXX.XXX port 67 01:33:30 dhclient: DHCPACK of XXX.XXX.XXX.XXX from XXX.XXX.XXX.XXX 01:33:30 dhclient: bound to XXX.XXX.XXX.XXX -- renewal in XXX seconds. 01:35:13 wpa_supplicant[XX60]: CTRL-EVENT-EAP-STARTED EAP authentication started 01:35:13 wpa_supplicant[XX60]: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected 01:35:14 wpa_supplicant[XX60]: EAP-MSCHAPV2: Authentication succeeded 01:35:14 wpa_supplicant[XX60]: EAP-TLV: TLV Result - Success - EAP-TLV/Phase2 Completed 01:35:14 wpa_supplicant[XX60]: CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully 01:35:14 NetworkManager[XX40]: <info> (eth1): supplicant connection state: completed -> 4-way handshake 01:35:14 wpa_supplicant[XX60]: WPA: Key negotiation completed with XX:XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP] 01:35:14 NetworkManager[XX40]: <info> (eth1): supplicant connection state: 4-way handshake -> group handshake 01:35:14 NetworkManager[XX40]: <info> (eth1): supplicant connection state: group handshake -> completed 01:35:17 wpa_supplicant[XX60]: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys 01:35:17 NetworkManager[XX40]: <info> (eth1): supplicant connection state: completed -> disconnected 01:35:17 NetworkManager[XX40]: <info> (eth1): supplicant connection state: disconnected -> scanning 01:35:26 wpa_supplicant[XX60]: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys 01:35:26 NetworkManager[XX40]: <info> (eth1): supplicant connection state: scanning -> disconnected 01:35:29 NetworkManager[XX40]: <info> (eth1): supplicant connection state: disconnected -> scanning 01:35:32 NetworkManager[XX40]: <info> (eth1): device state change: 8 -> 3 (reason 11) 01:35:32 NetworkManager[XX40]: <info> (eth1): deactivating device (reason: 11). 01:35:32 NetworkManager[XX40]: <info> (eth1): canceled DHCP transaction, DHCP client pid XX27 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) starting connection 'Auto XXXXXXXXXX' 01:35:32 NetworkManager[XX40]: <info> (eth1): device state change: 3 -> 4 (reason 0) 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... 01:35:32 NetworkManager[XX40]: <info> (eth1): supplicant connection state: scanning -> disconnected 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started... 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete. 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting... 01:35:32 NetworkManager[XX40]: <info> (eth1): device state change: 4 -> 5 (reason 0) 01:35:32 NetworkManager[XX40]: <info> Activation (eth1/wireless): access point 'Auto XXXXXXXXXX' has security, but secrets are required. 01:35:32 NetworkManager[XX40]: <info> (eth1): device state change: 5 -> 6 (reason 0) 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete. 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started... 01:35:32 NetworkManager[XX40]: <info> (eth1): device state change: 6 -> 4 (reason 0) 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete. 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting... 01:35:32 NetworkManager[XX40]: <info> (eth1): device state change: 4 -> 5 (reason 0) 01:35:32 NetworkManager[XX40]: <info> Activation (eth1/wireless): connection 'Auto XXXXXXXXXX' has security, and secrets exist. No new secrets needed. 01:35:32 NetworkManager[XX40]: <info> Config: added 'ssid' value 'XXXXXXXXXX' 01:35:32 NetworkManager[XX40]: <info> Config: added 'scan_ssid' value '1' 01:35:32 NetworkManager[XX40]: <info> Config: added 'key_mgmt' value 'WPA-EAP' 01:35:32 NetworkManager[XX40]: <info> Config: added 'password' value '<omitted>' 01:35:32 NetworkManager[XX40]: <info> Config: added 'eap' value 'PEAP' 01:35:32 NetworkManager[XX40]: <info> Config: added 'fragment_size' value 'XXX0' 01:35:32 NetworkManager[XX40]: <info> Config: added 'phase2' value 'auth=MSCHAPV2' 01:35:32 NetworkManager[XX40]: <info> Config: added 'ca_cert' value '/etc/ssl/certs/Equifax_Secure_CA.pem' 01:35:32 NetworkManager[XX40]: <info> Config: added 'identity' value 'XXXXXXX' 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete. 01:35:32 NetworkManager[XX40]: <info> Config: set interface ap_scan to 1 01:35:32 NetworkManager[XX40]: <info> (eth1): supplicant connection state: disconnected -> scanning 01:35:36 wpa_supplicant[XX60]: Associated with XX:XX:XX:XX:XX:XX 01:35:36 NetworkManager[XX40]: <info> (eth1): supplicant connection state: scanning -> associated 01:35:36 wpa_supplicant[XX60]: CTRL-EVENT-EAP-STARTED EAP authentication started 01:35:36 wpa_supplicant[XX60]: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected 01:35:36 wpa_supplicant[XX60]: EAP-MSCHAPV2: Authentication succeeded 01:35:36 wpa_supplicant[XX60]: EAP-TLV: TLV Result - Success - EAP-TLV/Phase2 Completed 01:35:36 wpa_supplicant[XX60]: CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully 01:35:36 NetworkManager[XX40]: <info> (eth1): supplicant connection state: associated -> 4-way handshake 01:35:36 wpa_supplicant[XX60]: WPA: Could not find AP from the scan results 01:35:36 wpa_supplicant[XX60]: WPA: Key negotiation completed with XX:XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP] 01:35:36 wpa_supplicant[XX60]: CTRL-EVENT-CONNECTED - Connection to XX:XX:XX:XX:XX:XX completed (reauth) [id=0 id_str=] 01:35:36 NetworkManager[XX40]: <info> (eth1): supplicant connection state: 4-way handshake -> group handshake 01:35:36 NetworkManager[XX40]: <info> (eth1): supplicant connection state: group handshake -> completed 01:35:36 NetworkManager[XX40]: <info> Activation (eth1/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'XXXXXXXXXX'. 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) scheduled. 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) started... 01:35:36 NetworkManager[XX40]: <info> (eth1): device state change: 5 -> 7 (reason 0) 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Beginning DHCPv4 transaction (timeout in 45 seconds) 01:35:36 NetworkManager[XX40]: <info> dhclient started with pid XX87 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) complete. 01:35:36 dhclient: Internet Systems Consortium DHCP Client VXXX.XXX.XXX 01:35:36 dhclient: Copyright 2004-2009 Internet Systems Consortium. 01:35:36 dhclient: All rights reserved. 01:35:36 dhclient: For info, please visit https://www.isc.org/software/dhcp/ 01:35:36 dhclient: 01:35:36 NetworkManager[XX40]: <info> (eth1): DHCPv4 state changed nbi -> preinit 01:35:36 dhclient: Listening on LPF/eth1/XX:XX:XX:XX:XX:XX 01:35:36 dhclient: Sending on LPF/eth1/XX:XX:XX:XX:XX:XX 01:35:36 dhclient: Sending on Socket/fallback 01:35:36 dhclient: DHCPREQUEST of XXX.XXX.XXX.XXX on eth1 to XXX.XXX.XXX.XXX port 67 01:35:36 dhclient: DHCPACK of XXX.XXX.XXX.XXX from XXX.XXX.XXX.XXX 01:35:36 dhclient: bound to XXX.XXX.XXX.XXX -- renewal in XXX seconds. 01:35:36 NetworkManager[XX40]: <info> (eth1): DHCPv4 state changed preinit -> reboot 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 4 of 5 (IP4 Configure Get) scheduled... 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 4 of 5 (IP4 Configure Get) started... 01:35:36 NetworkManager[XX40]: <info> address XXX.XXX.XXX.XXX 01:35:36 NetworkManager[XX40]: <info> prefix 20 (XXX.XXX.XXX.XXX) 01:35:36 NetworkManager[XX40]: <info> gateway XXX.XXX.XXX.XXX 01:35:36 NetworkManager[XX40]: <info> nameserver 'XXX.XXX.XXX.XXX' 01:35:36 NetworkManager[XX40]: <info> nameserver 'XXX.XXX.XXX.XXX' 01:35:36 NetworkManager[XX40]: <info> nameserver 'XXX.XXX.XXX.XXX' 01:35:36 NetworkManager[XX40]: <info> domain name 'server.domain.tld' 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 5 of 5 (IP Configure Commit) scheduled... 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 4 of 5 (IP4 Configure Get) complete. 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 5 of 5 (IP Configure Commit) started... 01:35:37 NetworkManager[XX40]: <info> (eth1): device state change: 7 -> 8 (reason 0) 01:35:37 NetworkManager[XX40]: <info> (eth1): roamed from BSSID XX:XX:XX:XX:XX:XX (XXXXXXXXXX) to XX:XX:XX:XX:XX:XX (XXXXXXXXX) 01:35:37 NetworkManager[XX40]: <info> Policy set 'Auto XXXXXXXXXX' (eth1) as default for IPv4 routing and DNS. 01:35:37 NetworkManager[XX40]: <info> Activation (eth1) successful, device activated. 01:35:37 NetworkManager[XX40]: <info> Activation (eth1) Stage 5 of 5 (IP Configure Commit) complete. 01:35:43 wpa_supplicant[XX60]: Trying to associate with XX:XX:XX:XX:XX:XX (SSID='XXXXXXXXXX' freq=2412 MHz) 01:35:43 NetworkManager[XX40]: <info> (eth1): supplicant connection state: completed -> associating 01:35:43 wpa_supplicant[XX60]: Association request to the driver failed 01:35:46 wpa_supplicant[XX60]: Associated with XX:XX:XX:XX:XX:XX 01:35:46 NetworkManager[XX40]: <info> (eth1): supplicant connection state: associating -> associated 01:35:46 NetworkManager[XX40]: <info> (eth1): supplicant connection state: associated -> 4-way handshake 01:35:46 wpa_supplicant[XX60]: WPA: Key negotiation completed with XX:XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP] 01:35:46 wpa_supplicant[XX60]: CTRL-EVENT-CONNECTED - Connection to XX:XX:XX:XX:XX:XX completed (reauth) [id=0 id_str=] 01:35:46 NetworkManager[XX40]: <info> (eth1): supplicant connection state: 4-way handshake -> group handshake 01:35:46 NetworkManager[XX40]: <info> (eth1): supplicant connection state: group handshake -> completed 01:40:47 wpa_supplicant[XX60]: WPA: Group rekeying completed with XX:XX:XX:XX:XX:XX [GTK=TKIP] 01:40:47 NetworkManager[XX40]: <info> (eth1): supplicant connection state: completed -> group handshake 01:40:47 NetworkManager[XX40]: <info> (eth1): supplicant connection state: group handshake -> completed 01:50:19 dhclient: DHCPREQUEST of XXX.XXX.XXX.XXX on eth1 to XXX.XXX.XXX.XXX port 67 01:50:19 dhclient: DHCPACK of XXX.XXX.XXX.XXX from XXX.XXX.XXX.XXX

Read the article

Windows Azure Evolution – Caching (Preview)

- by Shaun

Caching is a popular topic when we are building a high performance and high scalable system not only on top of the cloud platform but the on-premise environment as well. On March 2011 the Windows Azure AppFabric Caching had been production launched. It provides an in-memory, distributed caching service over the cloud. And now, in this June 2012 update, the cache team announce a grand new caching solution on Windows Azure, which is called Windows Azure Caching (Preview). And the original Windows Azure AppFabric Caching was renamed to Windows Azure Shared Caching. What’s Caching (Preview) If you had been using the Shared Caching you should know that it is constructed by a bunch of cache servers. And when you want to use you should firstly create a cache account from the developer portal and specify the size you want to use, which means how much memory you can use to store your data that wanted to be cached. Then you can add, get and remove them through your code through the cache URL. The Shared Caching is a multi-tenancy system which host all cached items across all users. So you don’t know which server your data was located. This caching mode works well and can take most of the cases. But it has some problems. The first one is the performance. Since the Shared Caching is a multi-tenancy system, which means all cache operations should go through the Shared Caching gateway and then routed to the server which have the data your are looking for. Even though there are some caches in the Shared Caching system it also takes time from your cloud services to the cache service. Secondary, the Shared Caching service works as a block box to the developer. The only thing we know is my cache endpoint, and that’s all. Someone may satisfied since they don’t want to care about anything underlying. But if you need to know more and want more control that’s impossible in the Shared Caching. The last problem would be the price and cost-efficiency. You pay the bill based on how much cache you requested per month. But when we host a web role or worker role, it seldom consumes all of the memory and CPU in the virtual machine (service instance). If using Shared Caching we have to pay for the cache service while waste of some of our memory and CPU locally. Since the issues above Microsoft offered a new caching mode over to us, which is the Caching (Preview). Instead of having a separated cache service, the Caching (Preview) leverage the memory and CPU in our cloud services (web role and worker role) as the cache clusters. Hence the Caching (Preview) runs on the virtual machines which hosted or near our cloud applications. Without any gateway and routing, since it located in the same data center and same racks, it provides really high performance than the Shared Caching. The Caching (Preview) works side-by-side to our application, initialized and worked as a Windows Service running in the virtual machines invoked by the startup tasks from our roles, we could get more information and control to them. And since the Caching (Preview) utilizes the memory and CPU from our existing cloud services, so it’s free. What we need to pay is the original computing price. And the resource on each machines could be used more efficiently. Enable Caching (Preview) It’s very simple to enable the Caching (Preview) in a cloud service. Let’s create a new windows azure cloud project from Visual Studio and added an ASP.NET Web Role. Then open the role setting and select the Caching page. This is where we enable and configure the Caching (Preview) on a role. To enable the Caching (Preview) just open the “Enable Caching (Preview Release)” check box. And then we need to specify which mode of the caching clusters we want to use. There are two kinds of caching mode, co-located and dedicate. The co-located mode means we use the memory in the instances we run our cloud services (web role or worker role). By using this mode we must specify how many percentage of the memory will be used as the cache. The default value is 30%. So make sure it will not affect the role business execution. The dedicate mode will use all memory in the virtual machine as the cache. In fact it will reserve some for operation system, azure hosting etc.. But it will try to use as much as the available memory to be the cache. As you can see, the Caching (Preview) was defined based on roles, which means all instances of this role will apply the same setting and play as a whole cache pool, and you can consume it by specifying the name of the role, which I will demonstrate later. And in a windows azure project we can have more than one role have the Caching (Preview) enabled. Then we will have more caches. For example, let’s say I have a web role and worker role. The web role I specified 30% co-located caching and the worker role I specified dedicated caching. If I have 3 instances of my web role and 2 instances of my worker role, then I will have two caches. As the figure above, cache 1 was contributed by three web role instances while cache 2 was contributed by 2 worker role instances. Then we can add items into cache 1 and retrieve it from web role code and worker role code. But the items stored in cache 1 cannot be retrieved from cache 2 since they are isolated. Back to our Visual Studio we specify 30% of co-located cache and use the local storage emulator to store the cache cluster runtime status. Then at the bottom we can specify the named caches. Now we just use the default one. Now we had enabled the Caching (Preview) in our web role settings. Next, let’s have a look on how to consume our cache. Consume Caching (Preview) The Caching (Preview) can only be consumed by the roles in the same cloud services. As I mentioned earlier, a cache contributed by web role can be connected from a worker role if they are in the same cloud service. But you cannot consume a Caching (Preview) from other cloud services. This is different from the Shared Caching. The Shared Caching is opened to all services if it has the connection URL and authentication token. To consume the Caching (Preview) we need to add some references into our project as well as some configuration in the Web.config. NuGet makes our life easy. Right click on our web role project and select “Manage NuGet packages”, and then search the package named “WindowsAzure.Caching”. In the package list install the “Windows Azure Caching Preview”. It will download all necessary references from the NuGet repository and update our Web.config as well. Open the Web.config of our web role and find the “dataCacheClients” node. Under this node we can specify the cache clients we are going to use. For each cache client it will use the role name to identity and find the cache. Since we only have this web role with the Caching (Preview) enabled so I pasted the current role name in the configuration. Then, in the default page I will add some code to show how to use the cache. I will have a textbox on the page where user can input his or her name, then press a button to generate the email address for him/her. And in backend code I will check if this name had been added in cache. If yes I will return the email back immediately. Otherwise, I will sleep the tread for 2 seconds to simulate the latency, then add it into cache and return back to the page. 1: protected void btnGenerate_Click(object sender, EventArgs e) 2: { 3: // check if name is specified 4: var name = txtName.Text; 5: if (string.IsNullOrWhiteSpace(name)) 6: { 7: lblResult.Text = "Error. Please specify name."; 8: return; 9: } 10: 11: bool cached; 12: var sw = new Stopwatch(); 13: sw.Start(); 14: 15: // create the cache factory and cache 16: var factory = new DataCacheFactory(); 17: var cache = factory.GetDefaultCache(); 18: 19: // check if the name specified is in cache 20: var email = cache.Get(name) as string; 21: if (email != null) 22: { 23: cached = true; 24: sw.Stop(); 25: } 26: else 27: { 28: cached = false; 29: // simulate the letancy 30: Thread.Sleep(2000); 31: email = string.Format("{0}@igt.com", name); 32: // add to cache 33: cache.Add(name, email); 34: } 35: 36: sw.Stop(); 37: lblResult.Text = string.Format( 38: "Cached = {0}. Duration: {1}s. {2} => {3}", 39: cached, sw.Elapsed.TotalSeconds.ToString("0.00"), name, email); 40: } The Caching (Preview) can be used on the local emulator so we just F5. The first time I entered my name it will take about 2 seconds to get the email back to me since it was not in the cache. But if we re-enter my name it will be back at once from the cache. Since the Caching (Preview) is distributed across all instances of the role, so we can scaling-out it by scaling-out our web role. Just use 2 instances and tweak some code to show the current instance ID in the page, and have another try. Then we can see the cache can be retrieved even though it was added by another instance. Consume Caching (Preview) Across Roles As I mentioned, the Caching (Preview) can be consumed by all other roles within the same cloud service. For example, let’s add another web role in our cloud solution and add the same code in its default page. In the Web.config we add the cache client to one enabled in the last role, by specifying its role name here. Then we start the solution locally and go to web role 1, specify the name and let it generate the email to us. Since there’s no cache for this name so it will take about 2 seconds but will save the email into cache. And then we go to web role 2 and specify the same name. Then you can see it retrieve the email saved by the web role 1 and returned back very quickly. Finally then we can upload our application to Windows Azure and test again. Make sure you had changed the cache cluster status storage account to the real azure account. More Awesome Features As a in-memory distributed caching solution, the Caching (Preview) has some fancy features I would like to highlight here. The first one is the high availability support. This is the first time I have heard that a distributed cache support high availability. In the distributed cache world if a cache cluster was failed, the data it stored will be lost. This behavior was introduced by Memcached and is followed by almost all distributed cache productions. But Caching (Preview) provides high availability, which means you can specify if the named cache will be backup automatically. If yes then the data belongs to this named cache will be replicated on another role instance of this role. Then if one of the instance was failed the data can be retrieved from its backup instance. To enable the backup just open the Caching page in Visual Studio. In the named cache you want to enable backup, change the Backup Copies value from 0 to 1. The value of Backup Copies only for 0 and 1. “0” means no backup and no high availability while “1” means enabled high availability with backup the data into another instance. But by using the high availability feature there are something we need to make sure. Firstly the high availability does NOT means the data in cache will never be lost for any kind of failure. For example, if we have a role with cache enabled that has 10 instances, and 9 of them was failed, then most of the cached data will be lost since the primary and backup instance may failed together. But normally is will not be happened since MS guarantees that it will use the instance in the different fault domain for backup cache. Another one is that, enabling the backup means you store two copies of your data. For example if you think 100MB memory is OK for cache, but you need at least 200MB if you enabled backup. Besides the high availability, the Caching (Preview) support more features introduced in Windows Server AppFabric Caching than the Windows Azure Shared Caching. It supports local cache with notification. It also support absolute and slide window expiration types as well. And the Caching (Preview) also support the Memcached protocol as well. This means if you have an application based on Memcached, you can use Caching (Preview) without any code changes. What you need to do is to change the configuration of how you connect to the cache. Similar as the Windows Azure Shared Caching, MS also offers the out-of-box ASP.NET session provider and output cache provide on top of the Caching (Preview). Summary Caching is very important component when we building a cloud-based application. In the June 2012 update MS provides a new cache solution named Caching (Preview). Different from the existing Windows Azure Shared Caching, Caching (Preview) runs the cache cluster within the role instances we have deployed to the cloud. It gives more control, more performance and more cost-effect. So now we have two caching solutions in Windows Azure, the Shared Caching and Caching (Preview). If you need a central cache service which can be used by many cloud services and web sites, then you have to use the Shared Caching. But if you only need a fast, near distributed cache, then you’d better use Caching (Preview). Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article

Include weather information in ASP.Net site from weather.com services

- by sreejukg

In this article, I am going to demonstrate how you can use the XMLOAP services (referred as XOAP from here onwards) provided by weather.com to display the weather information in your website. The XOAP services are available to be used for free of charge, provided you are comply with requirements from weather.com. I am writing this article from a technical point of view. If you are planning to use weather.com XOAP services in your application, please refer to the terms and conditions from weather.com website. In order to start using the XOAP services, you need to sign up the XOAP datafeed. The signing process is simple, you simply browse the url http://www.weather.com/services/xmloap.html. The URL looks similar to the following. Click on the sign up button, you will reach the registration page. Here you need to specify the site name you need to use this feed for. The form looks similar to the following. Once you fill all the mandatory information, click on save and continue button. That’s it. The registration is over. You will receive an email that contains your partner id, license key and SDK. The SDK available in a zipped format, contains the terms of use and documentation about the services available. Other than this the SDK includes the logos and icons required to display the weather information. As per the SDK, currently there are 2 types of information available through XOAP. These services are Current Conditions for over 30,000 U.S. and over 7,900 international Location IDs Updated at least Hourly Five-Day Forecast (today + 4 additional forecast days in consecutive order beginning with tomorrow) for over 30,000 U.S. and over 7,900 international Location IDs Updated at least Three Times Daily The SDK provides detailed information about the fields included in response of each service. Additionally there is a refresh rate that you need to comply with. As per the SDK, the refresh rate means the following “Refresh Rate” shall mean the maximum frequency with which you may call the XML Feed for a given LocID requesting a data set for that LocID. During the time period in between refresh periods the data must be cached by you either in the memory on your servers or in Your Desktop Application. About the Services Weather.com will provide you with access to the XML Feed over the Internet through the hostname xoap.weather.com. The weather data from the XML feed must be requested for a specific location. So you need a location ID (LOC ID). The XML feed work with 2 types of location IDs. First one is with City Identifiers and second one is using 5 Digit US postal codes. If you do not know your location ID, don’t worry, there is a location id search service available for you to retrieve the location id from city name. Since I am a resident in the Kingdom of Bahrain, I am going to retrieve the weather information for Manama(the capital of Bahrain) . In order to get the location ID for Manama, type the following URL in your address bar. http://xoap.weather.com/search/search?where=manama I got the following XML output. <?xml version="1.0" encoding="UTF-8"?> <!-- This document is intended only for use by authorized licensees of The –> <!-- Weather Channel. Unauthorized use is prohibited. Copyright 1995-2011, –> <!-- The Weather Channel Interactive, Inc. All Rights Reserved. –> <search ver="3.0"> <loc id="BAXX0001" type="1">Al Manama, Bahrain</loc> </search> You can try this with any city name, if the city is available, it will return the location id, and otherwise, it will return nothing. In order to get the weather information, from XOAP, you need to pass certain parameters to the XOAP service. A brief about the parameters are as follows. Please refer SDK for more details. Parameter name Possible Value cc Optional, if you include this, the current condition will be returned. Value can be anything, as it will be ignored e.g. cc=* dayf If you want the forecast for 5 days, specify dayf=5 This is optional iink Value should be XOAP par Your partner id. You can find this in your registration email from weather.com prod Value should be XOAP key The license key assigned to you. This will be available in the registration email unit s or m (standard or matric or you can think of Celsius/Fahrenheit) this is optional field, if not specified the unit will be standard(s) The URL host for the XOAP service is http://xoap.weather.com. So for my purpose, I need the following request to be made to access the XOAP services. http://xoap.weather.com/weather/local/BAXX0001?cc=*&link=xoap&prod=xoap&par=*********&key=************** (The ***** to be replaced with the corresponding alternatives) The response XML have a root element “weather”. Under the root element, it has the following sections <head> - the meta data information about the weather results returned. <loc> - the location data block that provides, the information about the location for which the wheather data is retrieved. <lnks> - the 4 promotional links you need to place along with the weather display. Additional to these 4 links, there should be another link with weather channel logo to the home page of weather.com. <cc> - the current condition data. This element will be there only if you specify the cc element in the request. <dayf> - the forcast data as you specified. This element will be there only if you specify the dayf in the request. In this walkthrough, I am going to capture the weather information for Manama (Location ID: BAXX0001). You need 2 applications to display weather information in your website. A Console application that retrieves data from the XMLOAP and store in the SQL Server database (or any data store as you prefer).This application will be scheduled to execute in every 25 minutes using windows task scheduler, so that we can comply with the refresh rate. A web application that display data from the SQL Server database Retrieve the Weather from XOAP I have created a console application named, Weather Service. I created a SQL server database, with the following columns. I named the table as tblweather. You are free to choose any name. Column name Description lastUpdated Datetime, this is the last time when the weather data is updated. This is the time of the service running TemparatureDateTime The date and time returned by XML feed Temparature The temperature returned by the XML feed. TemparatureUnit The unit of the temperature returned by the XML feed iconId The id of the icon to be used. Currently 48 icons from 0 to 47 are available. WeatherDescription The Weather Description Phrase returned by the feed. Link1url The url to the first promo link Link1Text The text for the first promo link Link2url The url to the second promo link Link2Text The text for the second promo link Link3url The url to the third promo link Link3Text The text for the third promo link Link4url The url to the fourth promo link Link4Text The text for the fourth promo link Every time when the service runs, the application will update the database columns from the XOAP data feed. When the application starts, It is going to get the data as XML from the url. This demonstration uses LINQ to extract the necessary data from the fetched XML. The following are the code segment for extracting data from the weather XML using LINQ. // first, create an instance of the XDocument class with the XOAP URL. replace **** with the corresponding values. XDocument weather = XDocument.Load("http://xoap.weather.com/weather/local/BAXX0001?cc=*&link=xoap&prod=xoap&par=***********&key=c*********"); // construct a query using LINQ var feedResult = from item in weather.Descendants() select new { unit = item.Element("head").Element("ut").Value, temp = item.Element("cc").Element("tmp").Value, tempDate = item.Element("cc").Element("lsup").Value, iconId = item.Element("cc").Element("icon").Value, description = item.Element("cc").Element("t").Value, links = from link in item.Elements("lnks").Elements("link") select new { url = link.Element("l").Value, text = link.Element("t").Value } }; // Load the root node to a variable, you may use foreach construct instead. var item1 = feedResult.First(); *If you want to learn more about LINQ and XML, read this nice blog from Scott GU. http://weblogs.asp.net/scottgu/archive/2007/08/07/using-linq-to-xml-and-how-to-build-a-custom-rss-feed-reader-with-it.aspx Now you have all the required values in item1. For e.g. if you want to get the temperature, use item1.temp; Now I just need to execute an SQL query against the database. See the connection part. using (SqlConnection conn = new SqlConnection(@"Data Source=sreeju\sqlexpress;Initial Catalog=Sample;Integrated Security=True")) { string strSql = @"update tblweather set lastupdated=getdate(), temparatureDateTime = @temparatureDateTime, temparature=@temparature, temparatureUnit=@temparatureUnit, iconId = @iconId, description=@description, link1url=@link1url, link1text=@link1text, link2url=@link2url, link2text=@link2text,link3url=@link3url, link3text=@link3text,link4url=@link4url, link4text=@link4text"; SqlCommand comm = new SqlCommand(strSql, conn); comm.Parameters.AddWithValue("temparatureDateTime", item1.tempDate); comm.Parameters.AddWithValue("temparature", item1.temp); comm.Parameters.AddWithValue("temparatureUnit", item1.unit); comm.Parameters.AddWithValue("description", item1.description); comm.Parameters.AddWithValue("iconId", item1.iconId); var lstLinks = item1.links; comm.Parameters.AddWithValue("link1url", lstLinks.ElementAt(0).url); comm.Parameters.AddWithValue("link1text", lstLinks.ElementAt(0).text); comm.Parameters.AddWithValue("link2url", lstLinks.ElementAt(1).url); comm.Parameters.AddWithValue("link2text", lstLinks.ElementAt(1).text); comm.Parameters.AddWithValue("link3url", lstLinks.ElementAt(2).url); comm.Parameters.AddWithValue("link3text", lstLinks.ElementAt(2).text); comm.Parameters.AddWithValue("link4url", lstLinks.ElementAt(3).url); comm.Parameters.AddWithValue("link4text", lstLinks.ElementAt(3).text); conn.Open(); comm.ExecuteNonQuery(); conn.Close(); Console.WriteLine("database updated"); } Now click ctrl + f5 to run the service. I got the following output Check your database and make sure, the data is updated with the latest information from the service. (Make sure you inserted one row in the database by entering some values before executing the service. Otherwise you need to modify your application code to count the rows and conditionally perform insert/update query) Display the Weather information in ASP.Net page Now you got all the data in the database. You just need to create a web application and display the data from the database. I created a new ASP.Net web application with a default.aspx page. In order to comply with the terms of weather.com, You need to use Weather.com logo along with the weather display. You can find the necessary logos to use under the folder “logos” in the SDK. Additionally copy any of the icon set from the folder “icons” to your web application. I used the 93x93 icon set. You are free to use any other sizes available. The design view of the page in VS2010 looks similar to the following. The page contains a heading, an image control (for displaying the weather icon), 2 label controls (for displaying temperature and weather description), 4 hyperlinks (for displaying the 4 promo links returned by the XOAP service) and weather.com logo with hyperlink to the weather.com home page. I am going to write code that will update the values of these controls from the values stored in the database by the service application as mentioned in the previous step. Go to the code behind file for the webpage, enter the following code under Page_Load event handler. using (SqlConnection conn = new SqlConnection(@"Data Source=sreeju\sqlexpress;Initial Catalog=Sample;Integrated Security=True")) { SqlCommand comm = new SqlCommand("select top 1 * from tblweather", conn); conn.Open(); SqlDataReader reader = comm.ExecuteReader(); if (reader.Read()) { lblTemparature.Text = reader["temparature"].ToString() + "°" + reader["temparatureUnit"].ToString(); lblWeatherDescription.Text = reader["description"].ToString(); imgWeather.ImageUrl = "icons/" + reader["iconId"].ToString() + ".png"; lnk1.Text = reader["link1text"].ToString(); lnk1.NavigateUrl = reader["link1url"].ToString(); lnk2.Text = reader["link2text"].ToString(); lnk2.NavigateUrl = reader["link2url"].ToString(); lnk3.Text = reader["link3text"].ToString(); lnk3.NavigateUrl = reader["link3url"].ToString(); lnk4.Text = reader["link4text"].ToString(); lnk4.NavigateUrl = reader["link4url"].ToString(); } conn.Close(); } Press ctrl + f5 to run the page. You will see the following output. That’s it. You need to configure the console application to run every 25 minutes so that the database is updated. Also you can fetch the forecast information and store those in the database, and then retrieve it later in your web page. Since the data resides in your database, you have the full control over your display. You need to make sure your website comply with weather.com license requirements. If you want to get the source code of this walkthrough through the application, post your email address below. Hope you enjoy the reading.

Read the article

CodePlex Daily Summary for Wednesday, November 21, 2012

CodePlex Daily Summary for Wednesday, November 21, 2012Popular ReleasesImapX 2: ImapX 2.0.0.6: An updated release of the ImapX 2 library, containing many bugfixes for both, the library and the sample application.Metodología General Ajustada - MGA: 03.05.05: Cambios John: Se modificó el Procedimiento Alamacenado PROF03ObjetivoProductoConsultarIdF03 que no incluía los campos de IdUnidadMedida y UnidadMedida, lo que generaba error en la capa de datos al leer estos campos (PasarDataSetAPROF03ObjetivoProductoInfo) y terminaba devolviendo NULL en los registros, esto no dejaba la información en la Exportación y por ende en la Importación no subían los Productos. Generación de instaladores. Soporte técnico por correo electrónico, telefónico y en sitio.WiX Toolset: WiX v3.7 RC: WiX v3.7 RC (3.7.1119.0) provides feature complete Bundle update and reference tracking plus several bug fixes. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/11/20/WiX-v3.7-Release-Candidate-availablePicturethrill: Version 2.11.20.0: Fixed up Bing image provider on Windows 8Excel AddIn to reset the last worksheet cell: XSFormatCleaner.xla: Modified the commandbar code to use CommandBar IDs instead of English names.Json.NET: Json.NET 4.5 Release 11: New feature - Added ITraceWriter, MemoryTraceWriter, DiagnosticsTraceWriter New feature - Added StringEscapeHandling with options to escape HTML and non-ASCII characters New feature - Added non-generic JToken.ToObject methods New feature - Deserialize ISet<T> properties as HashSet<T> New feature - Added implicit conversions for Uri, TimeSpan, Guid New feature - Missing byte, char, Guid, TimeSpan and Uri explicit conversion operators added to JToken New feature - Special case...EntitiesToDTOs - Entity Framework DTO Generator: EntitiesToDTOs.v3.0: DTOs and Assemblers can be generated inside project folders! Choose the types you want to generate! Support for Visual Studio 2012 !!! Support for new Entity Framework EDMX (format used by VS2012) ! Support for Enum Types! Optional automatic check for updates! Added the following methods to Assemblers! IEnumerable<DTO>.ToEntities() : ICollection<Entity> IEnumerable<Entity>.ToDTOs() : ICollection<DTO> Indicate class identifier for DTOs and Assemblers! Cleaner Assemblers code....mojoPortal: 2.3.9.4: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2394-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0, but we recommend you to use .NET 4, we will probably drop support for .NET 3.5 once .NET 4.5 is available The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code and are not intended for use in Visual Studio. To download the source code see getting the lates...VidCoder: 1.4.6 Beta: Brought back the x264 advanced options panel due to popular demand. Thank you for all the feedback. x264 Preset/Profile/Tune/Level has been moved back to the Video tab, along with a copy of the "extra options" string. Added Fast Decode and Zero Latency checkboxes to support multiple Tunes. Added cropping option "None". Audio bitrates that are incompatible with the encoder (such as MP3 > 320 kbps) are no longer preset on the list. Fixed crash on opening VidCoder after de-selecting "re...DotNetNuke® Store: 03.01.07: What's New in this release? IMPORTANT: this version requires DotNetNuke 04.06.02 or higher! DO NOT REPORT BUGS HERE IN THE ISSUE TRACKER, INSTEAD USE THE DotNetNuke Store Forum! Bugs corrected: - Replaced some hard coded references to the default address provider classes by the corresponding interfaces to allow the creation of another address provider with a different name. New Features: - Added the 'pickup' delivery option at checkout. - Added the 'no delivery' option in the Store Admin ...Bundle Transformer - a modular extension for ASP.NET Web Optimization Framework: Bundle Transformer 1.6.10: Version: 1.6.10 Published: 11/18/2012 Now almost all of the Bundle Transformer's assemblies is signed (except BundleTransformer.Yui.dll); In BundleTransformer.SassAndScss the SassAndCoffee.Ruby library was replaced by my own implementation of the Sass- and SCSS-compiler (based on code of the SassAndCoffee.Ruby library version 2.0.2.0); In BundleTransformer.CoffeeScript added support of CoffeeScript version 1.4.0-3; In BundleTransformer.TypeScript added support of TypeScript version 0....ExtJS based ASP.NET 2.0 Controls: FineUI v3.2.0: +2012-11-18 v3.2.0 -?????????????????SelectedValueArray????????（◇?◆:）。 -???????????????????RecoverPropertiesFromJObject????（〓?〓、????、??、Vian_Pan）。 -????????????，?????????????，???SelectedValueArray???????（sam.chang）。 -??Alert.Show???????????（swtseaman）。 -???????????????，??Icon??IconUrl????（swtseaman）。 -?????????TimePicker（??）。 -?????????，??/res.axd?css=blue.css&v=1。 -????????，?????????????，???????。 -????MenuCheckBox（???????）。 -?RadioButton??AutoPostBack??。 -???????FCKEditor?????????...BugNET Issue Tracker: BugNET 1.2: Please read our release notes for BugNET 1.2: http://blog.bugnetproject.com/bugnet-1-2-has-been-released Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you will pollute the rating, and you won't get an answer.Paint.NET PSD Plugin: 2.2.0: Changes: Layer group visibility is now applied to all layers within the group. This greatly improves the visual fidelity of complex PSD files that have hidden layer groups. Layer group names are prefixed so that users can get an indication of the layer group hierarchy. (Paint.NET has a flat list of layers, so the hierarchy is flattened out on load.) The progress bar now reports status when saving PSD files, instead of showing an indeterminate rolling bar. Performance improvement of 1...CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1116.7): [IMPROVED] Detailed error message descriptions for FaultException [FIX] Fixed bug in rule CrmOfflineAccessStateRule which had incorrect State attribute name [FIX] Fixed bug in rule EntityPropertyRule which was missing PropertyValue attribute [FIX] Current connection information was not displayed in status bar while refreshing list of entitiesSuper Metroid Randomizer: Super Metroid Randomizer v5: v5 -Added command line functionality for automation purposes. -Implented Krankdud's change to randomize the Etecoon's item. NOTE: this version will not accept seeds from a previous version. The seed format has changed by necessity. v4 -Started putting version numbers at the top of the form. -Added a warning when suitless Maridia is required in a parsed seed. v3 -Changed seed to only generate filename-legal characters. Using old seeds will still work exactly the same. -Files can now be saved...Caliburn Micro: WPF, Silverlight, WP7 and WinRT/Metro made easy.: Caliburn.Micro v1.4: Changes This version includes many bug fixes across all platforms, improvements to nuget support and...the biggest news of all...full support for both WinRT and WP8. Download Contents Debug and Release Assemblies Samples Readme.txt License.txt Packages Available on Nuget Caliburn.Micro – The full framework compiled into an assembly. Caliburn.Micro.Start - Includes Caliburn.Micro plus a starting bootstrapper, view model and view. Caliburn.Micro.Container – The Caliburn.Micro invers...DirectX Tool Kit: November 15, 2012: November 15, 2012 Added support for WIC2 when available on Windows 8 and Windows 7 with KB 2670838 Cleaned up warning level 4 warningsDotNetNuke® Community Edition CMS: 06.02.05: Major Highlights Updated the system so that it supports nested folders in the App_Code folder Updated the Global Error Handling so that when errors within the global.asax handler happen, they are caught and shown in a page displaying the original HTTP error code Fixed issue that stopped users from specifying Link URLs that open on a new window Security FixesFixed issue in the Member Directory module that could show members to non authenticated users Fixed issue in the Lists modul...fastJSON: v2.0.10: - added MonoDroid projectNew Projects1121codeplex01: Today's task is to test portal on JapaneseAgileToDo: a to do list use wpf ef sqlce!Applay: Applay is a library that allows you to wrap authorization and validation around the services of your application layer by using a dynamic proxy.ArunimaErp: Enterprise Resource Planning Software for Arunima GroupBootCMS: BootCMS makes webdevelopment easy.codeplex01: I need go out for a whileCoding4Fun's Maelstrom: Introduced at //build/ 2012, Maelstrom is Coding4Fun's latest creation. Step up to the podium and battle against your opponent in full-on stereoscopic 3D!CTCS Project 2012: 11/21/2012 @ svn repository ctodo: TODO List Management Librarydeploy-with-ease: One-click deployment tool based on DrobBox files hostingDesign Resources .NET: D-R.NET is a set of pre-built implementations of oft-recurring application designs. D-R.NET saves considerable time and money in building user-focused applications: from basic to complex. DnfWeb: dnf??Dr.Peng: dr.peng ????????。DriveKeepAlive: Managed .NET service intended to keep external hard drives "awake" for immediate access. Developed in C# with Visual Studio 2008Ecommerce Platform: Ecommerce PlatformEventManagerReset: Project created for Reset meetings.FaceComparerDistributed: project of face compare distributed versionFileSystemExplorerExample: WPF MVVM Sample applicationFinlogiK ReSharper Contrib: FinlogiK ReSharper Contrib is a plugin for ReSharper 5.1 which adds code cleanup and inspection options for static qualifiers.Gestione Lampade Votive: Gestione dei canoni annuali dei loculi cimiteriali, con stampa di comunicazioni ai contribuenti e dei bollettini di conto corrente postale (a due o tre cedole).GI_PII: HABA BABA?GIV_P2: second projectHex o'clock: Projekt kolorowego zegara.IISProcessScheduler: Schedule processes from within IIS.Image Tagger & Resizer: Resize, and text in the lower right of picture with i.e. copyright information.IT Kohvik: ITK cafe school project.jean1121codeplex01: goodKooboo3 Helper: It's a developer tutorial code for kooboo cms v3. http://kooboo.codeplex.comMAVI: mobile application for the visually impaired: bill recognition & tag and recognize objects based on a specific stickerMecanismos de Segurança Interoperáveis para Serviços Web: Esse projeto pretende desenvolver um framework que forneça requisitos de segurança de forma interoperável através de Serviços Web. Metro UI For Windows Forms: Provides a set of controls and form templates for designing user interfaces based on a similar minimalist metro style. For those who love Windows Forms.NHSmartBootstrapper: In a "fast-changing" world, your LoB application needs to be ready to change as well. The usage of NHibernate Listeners together with smart application bootstrapping, even in a complex scenario, can lead to extensible and new-feature-ready applications. Office Add-In Monitor: Office Add-in Monitor protects add-ins from being disabled.Orchard Responsive Theme Machine: A responsive version of the Orchard CMS "Theme Machine" which is commonly used as a starting point for building custom themes. Supports many resolutions.Orchard Simple Contact Form: An Orchard CMS module that provides a simple contact form that sends an email. It can be used as either a content part or widget.Peon War: Peon war is a game where peons are fighting.Project Files Linker (VS Add-In): PFL project is used to generate multiple projects with links to the same files to achieve projects for different .NET FW versions.Quibbler - Universal News Reader: Quibbler is a product designed and developed by Indigo Architects. Quibbler is a desktop application which runs on user's machine and provides a intuitive user interface for reading news in offline mode. Quibbler is developed in WPF (.Net 3.5).Samcrypt: .SenchaTest: SenchaTestShared Genomics Project - Workbench Codebase: The Shared Genomics workbench enables a diverse user group of researchers to explore the associations between genetic and other factors in their datasets. It provides a graphical user interface to the analysis functions published in a sister Codeplex project i.e. MPI Codebase.SharePoint 2013 FBA Pack: This is the home of the SharePoint 2013 FBA Pack. The FBA Pack for SharePoint 2013 is currently in development and is coming soon.SharePoint Term Store PowerShell Backup & Restore Scripts: This project is focused on development of PowerShell script tools for backup and restore of SharePoint Managed Metadata service application Term Store taxonomy.SharpPlanets: A simple game completely designed and written in C#, inspired by JPlanets.SpaceShooter: A small hobbyist game. It is similar to the 2D Arcade shooter games.Stretched Background Image jQuery plugin: jQuery plugin for adding a stretched background image for any element in a web page. Uses an absolutely positioned image at z-index -1.Stsadm Templates for Visual Studio: The Stsadm Templates for Visual Studio 2005 and 2008 support you in making command extensions for SharePoint's commnand line tool stsadm.exe.SwissPost EasyTrack API: The SwissPost EasyTrack API allows you to track your parcels or letters everytime and in every application.System.Threading.Joins: The Joins project provides asynchronous concurrency semantics based on join calculus and modeled after the Microsoft Research C? (C Omega) project.T nagu Tetris: Meie versioon tuntud mängust tetris.testdd11202012tfs01: juktestddhg11202012hg01: stesttom11202012git02: fdsfdstesttom11202012hg01: gfdTetrissimus: Tetrissimus is an open source "Tetris" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses keyboard. This cross-platform and cross-browser game was tested under BeOS, Linux, NetBSD, OpenBSD, FreeBSD, Windows and others.Thrift Client .NET for WinRT (Windows Store Apps): thrift .net client for WinRT applicationTwitter Bootstrap for SharePoint: A Masterpage for SharePoint 2010 including the twitter bootstrap front-end frameworkTX Spell .NET ActiveX Package: TX Spell .NET ActiveX Package enables you to add high-performance spell checking capabilities to your VB6 applications.USB ACCELEROMETER: This project is a test demo for usb accelerometer. Application plays music (mp3 file) while usb acc gives high values from its coordinate between interval.VfaAccoutApps: Cash Payment Application of Vf AsiaVisualPoint Use PowerPoint inside Visual Studio: VisualPoint lets you show PowerPoint presentations from inside Visual Studio. Future release will automate walkthroughs and presentations.VS2010 Rc1 Fix: Illustrates a fix for working with the ASAP.NET Wizard control with VS2010 RC1WebSite.Request: WebSite.Request launch web request (via XMLHTTP) on website. Use, for example, to make initial request to sharepoint URL and escape "slow first request" problem.WPF Checked ListBox: This is simple implementation of WPF Checked ListBoxWPortal: doing nothing. that's it. i just want to use the subversion management. XNA Capture the Flag for the Microsoft Zune: Capture the Flag is a 2d Capture the flag game made for the Zune platform using XNA 3.0 CTP. Players choose to join or start a network session in the main menu. When in game, the player uses left or right on the DPad to choose the team on which to play with. Once sides have been chosen the party leader presses the center button on the Dpad to start the game. Teams switch between offense and defense for a total of 4 rounds in each game. When the game is over the party leader simply presses th...XPS Indexer: Xps file indexing for Google Desktop

Read the article

Wireless card power management

- by penner

I have noticed that when my computer in plugged in, the wireless strength increases. I'm assuming this is to do with power management. Is there a way to disable Wireless Power Management? I have found a few blog posts that show hacks to disable this but what is best practice here? Should there not be an option via the power menu that lets you toggle this? EDIT -- FILES AND LOGS AS REQUESTED /var/log/kern.log Jul 11 11:45:27 CoolBreeze kernel: [ 6.528052] postgres (1308): /proc/1308/oom_adj is deprecated, please use /proc/1308/oom_score_adj instead. Jul 11 11:45:27 CoolBreeze kernel: [ 6.532080] [fglrx] Gart USWC size:1280 M. Jul 11 11:45:27 CoolBreeze kernel: [ 6.532084] [fglrx] Gart cacheable size:508 M. Jul 11 11:45:27 CoolBreeze kernel: [ 6.532091] [fglrx] Reserved FB block: Shared offset:0, size:1000000 Jul 11 11:45:27 CoolBreeze kernel: [ 6.532094] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000 Jul 11 11:45:27 CoolBreeze kernel: [ 6.532098] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 Jul 11 11:45:38 CoolBreeze kernel: [ 17.423743] eth1: no IPv6 routers present Jul 11 11:46:37 CoolBreeze kernel: [ 75.836426] warning: `proftpd' uses 32-bit capabilities (legacy support in use) Jul 11 11:46:37 CoolBreeze kernel: [ 75.884215] init: plymouth-stop pre-start process (2922) terminated with status 1 Jul 11 11:54:25 CoolBreeze kernel: [ 543.679614] eth1: no IPv6 routers present dmesg [ 1.411959] ACPI: Power Button [PWRB] [ 1.412046] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 1.412054] ACPI: Sleep Button [SLPB] [ 1.412150] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 1.412765] ACPI: Lid Switch [LID0] [ 1.412866] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.412874] ACPI: Power Button [PWRF] [ 1.412996] ACPI: Fan [FAN0] (off) [ 1.413068] ACPI: Fan [FAN1] (off) [ 1.419493] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.419498] ACPI: Thermal Zone [TZ00] (27 C) [ 1.421913] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.421918] ACPI: Thermal Zone [TZ01] (61 C) [ 1.421971] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.421986] ACPI: Battery Slot [BAT0] (battery present) [ 1.422062] ERST: Table is not found! [ 1.422067] GHES: HEST is not enabled! [ 1.422158] isapnp: Scanning for PnP cards... [ 1.422242] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.434620] ACPI: Battery Slot [BAT0] (battery present) [ 1.736355] Freeing initrd memory: 14352k freed [ 1.777846] isapnp: No Plug & Play device found [ 1.963650] Linux agpgart interface v0.103 [ 1.967148] brd: module loaded [ 1.968866] loop: module loaded [ 1.969134] ahci 0000:00:1f.2: version 3.0 [ 1.969154] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.969226] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X [ 1.969277] ahci: SSS flag set, parallel bus scan disabled [ 1.969320] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x23 impl SATA mode [ 1.969329] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 1.969338] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.983340] scsi0 : ahci [ 1.983515] scsi1 : ahci [ 1.983670] scsi2 : ahci [ 1.983829] scsi3 : ahci [ 1.983985] scsi4 : ahci [ 1.984145] scsi5 : ahci [ 1.984270] ata1: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005100 irq 45 [ 1.984277] ata2: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005180 irq 45 [ 1.984282] ata3: DUMMY [ 1.984285] ata4: DUMMY [ 1.984288] ata5: DUMMY [ 1.984292] ata6: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005380 irq 45 [ 1.985150] Fixed MDIO Bus: probed [ 1.985192] tun: Universal TUN/TAP device driver, 1.6 [ 1.985196] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 1.985285] PPP generic driver version 2.4.2 [ 1.985472] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.985507] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.985534] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.985541] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.985626] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.985666] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.989663] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.989690] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1005800 [ 2.002183] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.002447] hub 1-0:1.0: USB hub found [ 2.002455] hub 1-0:1.0: 3 ports detected [ 2.002607] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.002633] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.002639] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 2.002737] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.002775] ehci_hcd 0000:00:1d.0: debug port 2 [ 2.006780] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 2.006806] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1005c00 [ 2.022161] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.022401] hub 2-0:1.0: USB hub found [ 2.022409] hub 2-0:1.0: 3 ports detected [ 2.022567] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.022599] uhci_hcd: USB Universal Host Controller Interface driver [ 2.022720] usbcore: registered new interface driver libusual [ 2.022813] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.035831] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.035844] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.036096] mousedev: PS/2 mouse device common for all mice [ 2.036710] rtc_cmos 00:07: RTC can wake from S4 [ 2.036881] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 2.037143] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.037503] device-mapper: uevent: version 1.0.3 [ 2.037656] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected] [ 2.037725] EISA: Probing bus 0 at eisa.0 [ 2.037729] EISA: Cannot allocate resource for mainboard [ 2.037734] Cannot allocate resource for EISA slot 1 [ 2.037738] Cannot allocate resource for EISA slot 2 [ 2.037741] Cannot allocate resource for EISA slot 3 [ 2.037745] Cannot allocate resource for EISA slot 4 [ 2.037749] Cannot allocate resource for EISA slot 5 [ 2.037753] Cannot allocate resource for EISA slot 6 [ 2.037756] Cannot allocate resource for EISA slot 7 [ 2.037760] Cannot allocate resource for EISA slot 8 [ 2.037764] EISA: Detected 0 cards. [ 2.037782] cpufreq-nforce2: No nForce2 chipset. [ 2.038264] cpuidle: using governor ladder [ 2.039015] cpuidle: using governor menu [ 2.039019] EFI Variables Facility v0.08 2004-May-17 [ 2.040061] TCP cubic registered [ 2.041438] NET: Registered protocol family 10 [ 2.043814] NET: Registered protocol family 17 [ 2.043823] Registering the dns_resolver key type [ 2.044290] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.044336] Using IPI No-Shortcut mode [ 2.045620] PM: Hibernation image not present or could not be loaded. [ 2.045644] registered taskstats version 1 [ 2.073070] Magic number: 4:976:796 [ 2.073415] rtc_cmos 00:07: setting system clock to 2012-07-11 18:45:23 UTC (1342032323) [ 2.076654] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.076658] EDD information not available. [ 2.302111] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.302587] ata1.00: ATA-9: M4-CT128M4SSD2, 000F, max UDMA/100 [ 2.302595] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.303143] ata1.00: configured for UDMA/100 [ 2.303453] scsi 0:0:0:0: Direct-Access ATA M4-CT128M4SSD2 000F PQ: 0 ANSI: 5 [ 2.303746] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.303920] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 2.304213] sd 0:0:0:0: [sda] Write Protect is off [ 2.304225] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.304471] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.306818] sda: sda1 sda2 < sda5 > [ 2.308780] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.318162] Refined TSC clocksource calibration: 1595.999 MHz. [ 2.318169] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 2.318178] Switching to clocksource tsc [ 2.450939] hub 1-1:1.0: USB hub found [ 2.451121] hub 1-1:1.0: 6 ports detected [ 2.561786] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 2.621757] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.636143] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-T633C, D800, max UDMA/100 [ 2.636152] ata2.00: applying bridge limits [ 2.649711] ata2.00: configured for UDMA/100 [ 2.653762] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-T633C D800 PQ: 0 ANSI: 5 [ 2.661486] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.661494] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.661890] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.662156] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.694649] hub 2-1:1.0: USB hub found [ 2.694840] hub 2-1:1.0: 8 ports detected [ 2.765823] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd [ 2.981454] ata6: SATA link down (SStatus 0 SControl 300) [ 2.982597] Freeing unused kernel memory: 740k freed [ 2.983523] Write protecting the kernel text: 5816k [ 2.983808] Write protecting the kernel read-only data: 2376k [ 2.983811] NX-protecting the kernel data: 4424k [ 3.014594] udevd[127]: starting version 175 [ 3.068925] sdhci: Secure Digital Host Controller Interface driver [ 3.068932] sdhci: Copyright(c) Pierre Ossman [ 3.069714] sdhci-pci 0000:09:00.0: SDHCI controller found [1180:e822] (rev 1) [ 3.069742] sdhci-pci 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.069786] sdhci-pci 0000:09:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 3.069798] sdhci-pci 0000:09:00.0: setting latency timer to 64 [ 3.069816] mmc0: no vmmc regulator found [ 3.069877] Registered led device: mmc0:: [ 3.070946] mmc0: SDHCI controller on PCI [0000:09:00.0] using DMA [ 3.071078] tg3.c:v3.121 (November 2, 2011) [ 3.071252] tg3 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.071269] tg3 0000:0b:00.0: setting latency timer to 64 [ 3.071403] firewire_ohci 0000:09:00.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 3.071417] firewire_ohci 0000:09:00.3: setting latency timer to 64 [ 3.078509] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 3.078517] EXT4-fs (sda1): write access will be enabled during recovery [ 3.110417] tg3 0000:0b:00.0: eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address b8:ac:6f:71:02:a6 [ 3.110425] tg3 0000:0b:00.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 3.110431] tg3 0000:0b:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 3.110436] tg3 0000:0b:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 3.125492] firewire_ohci: Added fw-ohci device 0000:09:00.3, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11 [ 3.390124] EXT4-fs (sda1): orphan cleanup on readonly fs [ 3.390135] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078710 [ 3.390232] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2363071 [ 3.390327] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078711 [ 3.390350] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078709 [ 3.390367] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078708 [ 3.390384] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078707 [ 3.390401] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078706 [ 3.390417] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078705 [ 3.390435] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078551 [ 3.390452] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078523 [ 3.390470] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078520 [ 3.390487] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7077901 [ 3.390551] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063272 [ 3.390562] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063266 [ 3.390572] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063261 [ 3.390582] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063256 [ 3.390592] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063255 [ 3.390602] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2363072 [ 3.390620] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2360050 [ 3.390698] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5250064 [ 3.390710] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2365394 [ 3.390728] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2365390 [ 3.390745] EXT4-fs (sda1): 22 orphan inodes deleted [ 3.390748] EXT4-fs (sda1): recovery complete [ 3.397636] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.624910] firewire_core: created device fw0: GUID 464fc000110e2661, S400 [ 3.927467] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.929965] udevd[400]: starting version 175 [ 3.933581] Adding 6278140k swap on /dev/sda5. Priority:-1 extents:1 across:6278140k SS [ 3.945183] lp: driver loaded but no devices found [ 3.999389] wmi: Mapper loaded [ 4.016696] ite_cir: Auto-detected model: ITE8708 CIR transceiver [ 4.016702] ite_cir: Using model: ITE8708 CIR transceiver [ 4.016706] ite_cir: TX-capable: 1 [ 4.016710] ite_cir: Sample period (ns): 8680 [ 4.016713] ite_cir: TX carrier frequency (Hz): 38000 [ 4.016716] ite_cir: TX duty cycle (%): 33 [ 4.016719] ite_cir: RX low carrier frequency (Hz): 0 [ 4.016722] ite_cir: RX high carrier frequency (Hz): 0 [ 4.025684] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 4.025691] Disabling lock debugging due to kernel taint [ 4.027410] IR NEC protocol handler initialized [ 4.030250] lib80211: common routines for IEEE802.11 drivers [ 4.030257] lib80211_crypt: registered algorithm 'NULL' [ 4.036024] IR RC5(x) protocol handler initialized [ 4.036092] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4.036188] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 4.036307] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 4.036361] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 4.039006] acpi device:03: registered as cooling_device10 [ 4.039164] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5 [ 4.039261] ACPI: Video Device [M86] (multi-head: yes rom: no post: no) [ 4.049753] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 4.050201] wl 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.050215] wl 0000:05:00.0: setting latency timer to 64 [ 4.052252] Registered IR keymap rc-rc6-mce [ 4.052432] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input6 [ 4.054614] IR RC6 protocol handler initialized [ 4.054787] rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0 [ 4.054839] ite_cir: driver has been successfully loaded [ 4.057338] IR JVC protocol handler initialized [ 4.061553] IR Sony protocol handler initialized [ 4.066578] input: MCE IR Keyboard/Mouse (ite-cir) as /devices/virtual/input/input7 [ 4.066724] IR MCE Keyboard/mouse protocol handler initialized [ 4.072580] lirc_dev: IR Remote Control driver registered, major 250 [ 4.073280] rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0 [ 4.073286] IR LIRC bridge handler initialized [ 4.077849] Linux video capture interface: v2.00 [ 4.079402] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:640f) [ 4.085492] EDAC MC: Ver: 2.1.0 [ 4.087138] lib80211_crypt: registered algorithm 'TKIP' [ 4.091027] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 4.091733] snd_hda_intel 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.091826] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X [ 4.091861] snd_hda_intel 0000:02:00.1: setting latency timer to 64 [ 4.093115] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50 [ 4.112448] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 4.112612] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input9 [ 4.113311] type=1400 audit(1342032325.540:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=658 comm="apparmor_parser" [ 4.114501] type=1400 audit(1342032325.540:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=658 comm="apparmor_parser" [ 4.115253] type=1400 audit(1342032325.540:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=658 comm="apparmor_parser" [ 4.121870] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10 [ 4.122096] usbcore: registered new interface driver uvcvideo [ 4.122100] USB Video Class driver (1.1.1) [ 4.128729] [fglrx] Maximum main memory to use for locked dma buffers: 5840 MBytes. [ 4.129678] [fglrx] vendor: 1002 device: 68c0 count: 1 [ 4.131991] [fglrx] ioport: bar 4, base 0x2000, size: 0x100 [ 4.132015] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.132024] pci 0000:02:00.0: setting latency timer to 64 [ 4.133712] [fglrx] Kernel PAT support is enabled [ 4.133747] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [ 4.162666] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.100.82.38 [ 4.184133] device-mapper: multipath: version 1.3.0 loaded [ 4.196660] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 4.279897] input: Dell WMI hotkeys as /devices/virtual/input/input11 [ 4.292402] Bluetooth: Core ver 2.16 [ 4.292449] NET: Registered protocol family 31 [ 4.292454] Bluetooth: HCI device and connection manager initialized [ 4.292459] Bluetooth: HCI socket layer initialized [ 4.292463] Bluetooth: L2CAP socket layer initialized [ 4.292473] Bluetooth: SCO socket layer initialized [ 4.296333] Bluetooth: RFCOMM TTY layer initialized [ 4.296342] Bluetooth: RFCOMM socket layer initialized [ 4.296345] Bluetooth: RFCOMM ver 1.11 [ 4.313586] ppdev: user-space parallel port driver [ 4.316619] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.316625] Bluetooth: BNEP filters: protocol multicast [ 4.383980] type=1400 audit(1342032325.812:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=938 comm="apparmor_parser" [ 4.385173] type=1400 audit(1342032325.812:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=938 comm="apparmor_parser" [ 4.425757] init: failsafe main process (898) killed by TERM signal [ 4.477052] type=1400 audit(1342032325.904:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1011 comm="apparmor_parser" [ 4.477592] type=1400 audit(1342032325.904:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1010 comm="apparmor_parser" [ 4.478099] type=1400 audit(1342032325.904:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1017 comm="apparmor_parser" [ 4.479233] type=1400 audit(1342032325.904:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1014 comm="apparmor_parser" [ 4.510060] vesafb: mode is 1152x864x32, linelength=4608, pages=0 [ 4.510065] vesafb: scrolling: redraw [ 4.510071] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 4.510084] mtrr: no more MTRRs available [ 4.513081] vesafb: framebuffer at 0xd0000000, mapped to 0xf9400000, using 3904k, total 3904k [ 4.515203] Console: switching to colour frame buffer device 144x54 [ 4.515278] fb0: VESA VGA frame buffer device [ 4.590743] tg3 0000:0b:00.0: irq 48 for MSI/MSI-X [ 4.702009] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.704409] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.978379] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 5.030104] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12 [ 5.045782] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 5.519573] [fglrx] ATIF platform detected with notification ID: 0x81 [ 6.391466] fglrx_pci 0000:02:00.0: irq 49 for MSI/MSI-X [ 6.393137] [fglrx] Firegl kernel thread PID: 1305 [ 6.393306] [fglrx] Firegl kernel thread PID: 1306 [ 6.393472] [fglrx] Firegl kernel thread PID: 1307 [ 6.393726] [fglrx] IRQ 49 Enabled [ 6.528052] postgres (1308): /proc/1308/oom_adj is deprecated, please use /proc/1308/oom_score_adj instead. [ 6.532080] [fglrx] Gart USWC size:1280 M. [ 6.532084] [fglrx] Gart cacheable size:508 M. [ 6.532091] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 6.532094] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000 [ 6.532098] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 [ 17.423743] eth1: no IPv6 routers present [ 75.836426] warning: `proftpd' uses 32-bit capabilities (legacy support in use) [ 75.884215] init: plymouth-stop pre-start process (2922) terminated with status 1 [ 543.679614] eth1: no IPv6 routers present lsmod Module Size Used by kvm_intel 127560 0 kvm 359456 1 kvm_intel joydev 17393 0 vesafb 13516 1 parport_pc 32114 0 bnep 17830 2 ppdev 12849 0 rfcomm 38139 0 bluetooth 158438 10 bnep,rfcomm dell_wmi 12601 0 sparse_keymap 13658 1 dell_wmi binfmt_misc 17292 1 dell_laptop 17767 0 dcdbas 14098 1 dell_laptop dm_multipath 22710 0 fglrx 2909855 143 snd_hda_codec_hdmi 31775 1 psmouse 72919 0 serio_raw 13027 0 i7core_edac 23382 0 lib80211_crypt_tkip 17275 0 edac_core 46858 1 i7core_edac uvcvideo 67203 0 snd_hda_codec_idt 60251 1 videodev 86588 1 uvcvideo ir_lirc_codec 12739 0 lirc_dev 18700 1 ir_lirc_codec ir_mce_kbd_decoder 12681 0 snd_seq_midi 13132 0 ir_sony_decoder 12462 0 ir_jvc_decoder 12459 0 snd_rawmidi 25424 1 snd_seq_midi ir_rc6_decoder 12459 0 wl 2646601 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event ir_rc5_decoder 12459 0 video 19068 0 snd_hda_intel 32765 5 snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq snd_hda_codec 109562 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel rc_rc6_mce 12454 0 lib80211 14040 2 lib80211_crypt_tkip,wl snd_hwdep 13276 1 snd_hda_codec ir_nec_decoder 12459 0 snd_pcm 80845 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec ite_cir 24743 0 rc_core 21263 10 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,rc_rc6_mce,ir_nec_decoder,ite_cir snd_timer 28931 2 snd_seq,snd_pcm wmi 18744 1 dell_wmi snd 62064 20 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_rawmidi,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer mac_hid 13077 0 soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm coretemp 13269 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp tg3 141369 0 firewire_ohci 40172 0 sdhci_pci 18324 0 firewire_core 56906 1 firewire_ohci sdhci 28241 1 sdhci_pci crc_itu_t 12627 1 firewire_core lshw *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 70:f1:a1:a9:54:31 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 ip=192.168.0.117 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0900000-f0903fff *-network description: Ethernet interface product: NetLink BCM5784M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0b:00.0 logical name: eth0 version: 10 serial: b8:ac:6f:71:02:a6 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 firmware=sb v2.19 latency=0 link=no multicast=yes port=twisted pair resources: irq:48 memory:f0d00000-f0d0ffff

Read the article

JMS Step 2 - Using the QueueSend.java Sample Program to Send a Message to a JMS Queue

- by John-Brown.Evans

JMS Step 2 - Using the QueueSend.java Sample Program to Send a Message to a JMS Queue .c21_2{vertical-align:top;width:487.3pt;border-style:solid;border-color:#000000;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c15_2{vertical-align:top;width:487.3pt;border-style:solid;border-color:#ffffff;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c0_2{padding-left:0pt;direction:ltr;margin-left:36pt} .c20_2{list-style-type:circle;margin:0;padding:0} .c10_2{list-style-type:disc;margin:0;padding:0} .c6_2{background-color:#ffffff} .c17_2{padding-left:0pt;margin-left:72pt} .c3_2{line-height:1.0;direction:ltr} .c1_2{font-size:10pt;font-family:"Courier New"} .c16_2{color:#1155cc;text-decoration:underline} .c13_2{color:inherit;text-decoration:inherit} .c7_2{background-color:#ffff00} .c9_2{border-collapse:collapse} .c2_2{font-family:"Courier New"} .c18_2{font-size:18pt} .c5_2{font-weight:bold} .c19_2{color:#ff0000} .c12_2{background-color:#f3f3f3;border-style:solid;border-color:#000000;border-width:1pt;} .c14_2{font-size:24pt} .c8_2{direction:ltr;background-color:#ffffff} .c11_2{font-style:italic} .c4_2{height:11pt} .title{padding-top:24pt;line-height:1.15;text-align:left;color:#000000;font-size:36pt;font-family:"Arial";font-weight:bold;padding-bottom:6pt}.subtitle{padding-top:18pt;line-height:1.15;text-align:left;color:#666666;font-style:italic;font-size:24pt;font-family:"Georgia";padding-bottom:4pt} li{color:#000000;font-size:10pt;font-family:"Arial"} p{color:#000000;font-size:10pt;margin:0;font-family:"Arial"} h1{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:24pt;font-family:"Arial";font-weight:normal;padding-bottom:0pt} h2{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:18pt;font-family:"Arial";font-weight:normal;padding-bottom:0pt} h3{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:14pt;font-family:"Arial";font-weight:normal;padding-bottom:0pt} h4{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:12pt;font-family:"Arial";font-weight:normal;padding-bottom:0pt} h5{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:11pt;font-family:"Arial";font-weight:normal;padding-bottom:0pt} h6{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:10pt;font-family:"Arial";font-weight:normal;padding-bottom:0pt} This post is the second in a series of JMS articles which demonstrate how to use JMS queues in a SOA context. In the previous post JMS Step 1 - How to Create a Simple JMS Queue in Weblogic Server 11g I showed you how to create a JMS queue and its dependent objects in WebLogic Server. In this article, we will use a sample program to write a message to that queue. Please review the previous post if you have not created those objects yet, as they will be required later in this example. The previous post also includes useful background information and links to the Oracle documentation for addional research. The following post in this series will show how to read the message from the queue again. 1. Source code The following java code will be used to write a message to the JMS queue. It is based on a sample program provided with the WebLogic Server installation. The sample is not installed by default, but needs to be installed manually using the WebLogic Server Custom Installation option, together with many, other useful samples. You can either copy-paste the following code into your editor, or install all the samples. The knowledge base article in My Oracle Support: How To Install WebLogic Server and JMS Samples in WLS 10.3.x (Doc ID 1499719.1) describes how to install the samples. QueueSend.java package examples.jms.queue; import java.io.BufferedReader; import java.io.IOException; import java.io.InputStreamReader; import java.util.Hashtable; import javax.jms.*; import javax.naming.Context; import javax.naming.InitialContext; import javax.naming.NamingException; /** This example shows how to establish a connection * and send messages to the JMS queue. The classes in this * package operate on the same JMS queue. Run the classes together to * witness messages being sent and received, and to browse the queue * for messages. The class is used to send messages to the queue. * * @author Copyright (c) 1999-2005 by BEA Systems, Inc. All Rights Reserved. */ public class QueueSend { // Defines the JNDI context factory. public final static String JNDI_FACTORY="weblogic.jndi.WLInitialContextFactory"; // Defines the JMS context factory. public final static String JMS_FACTORY="jms/TestConnectionFactory"; // Defines the queue. public final static String QUEUE="jms/TestJMSQueue"; private QueueConnectionFactory qconFactory; private QueueConnection qcon; private QueueSession qsession; private QueueSender qsender; private Queue queue; private TextMessage msg; /** * Creates all the necessary objects for sending * messages to a JMS queue. * * @param ctx JNDI initial context * @param queueName name of queue * @exception NamingException if operation cannot be performed * @exception JMSException if JMS fails to initialize due to internal error */ public void init(Context ctx, String queueName) throws NamingException, JMSException { qconFactory = (QueueConnectionFactory) ctx.lookup(JMS_FACTORY); qcon = qconFactory.createQueueConnection(); qsession = qcon.createQueueSession(false, Session.AUTO_ACKNOWLEDGE); queue = (Queue) ctx.lookup(queueName); qsender = qsession.createSender(queue); msg = qsession.createTextMessage(); qcon.start(); } /** * Sends a message to a JMS queue. * * @param message message to be sent * @exception JMSException if JMS fails to send message due to internal error */ public void send(String message) throws JMSException { msg.setText(message); qsender.send(msg); } /** * Closes JMS objects. * @exception JMSException if JMS fails to close objects due to internal error */ public void close() throws JMSException { qsender.close(); qsession.close(); qcon.close(); } /** main() method. * * @param args WebLogic Server URL * @exception Exception if operation fails */ public static void main(String[] args) throws Exception { if (args.length != 1) { System.out.println("Usage: java examples.jms.queue.QueueSend WebLogicURL"); return; } InitialContext ic = getInitialContext(args[0]); QueueSend qs = new QueueSend(); qs.init(ic, QUEUE); readAndSend(qs); qs.close(); } private static void readAndSend(QueueSend qs) throws IOException, JMSException { BufferedReader msgStream = new BufferedReader(new InputStreamReader(System.in)); String line=null; boolean quitNow = false; do { System.out.print("Enter message (\"quit\" to quit): \n"); line = msgStream.readLine(); if (line != null && line.trim().length() != 0) { qs.send(line); System.out.println("JMS Message Sent: "+line+"\n"); quitNow = line.equalsIgnoreCase("quit"); } } while (! quitNow); } private static InitialContext getInitialContext(String url) throws NamingException { Hashtable env = new Hashtable(); env.put(Context.INITIAL_CONTEXT_FACTORY, JNDI_FACTORY); env.put(Context.PROVIDER_URL, url); return new InitialContext(env); } } 2. How to Use This Class 2.1 From the file system on UNIX/Linux Log in to a machine with a WebLogic installation and create a directory to contain the source and code matching the package name, e.g. $HOME/examples/jms/queue. Copy the above QueueSend.java file to this directory. Set the CLASSPATH and environment to match the WebLogic server environment. Go to $MIDDLEWARE_HOME/user_projects/domains/base_domain/bin and execute . ./setDomainEnv.sh Collect the following information required to run the script: The JNDI name of a JMS queue to use In the Weblogic server console > Services > Messaging > JMS Modules > (Module name, e.g. TestJMSModule) > (JMS queue name, e.g. TestJMSQueue)Select the queue and note its JNDI name, e.g. jms/TestJMSQueue The JNDI name of a connection factory to connect to the queue Follow the same path as above to get the connection factory for the above queue, e.g. TestConnectionFactory and its JNDI namee.g. jms/TestConnectionFactory The URL and port of the WebLogic server running the above queue Check the JMS server for the above queue and the managed server it is targeted to, for example soa_server1. Now find the port this managed server is listening on, by looking at its entry under Environment > Servers in the WLS console, e.g. 8001 The URL for the server to be given to the QueueSend program in this example will therefore be t3://host.domain:8001 e.g. t3://jbevans-lx.de.oracle.com:8001 Edit QueueSend.java and enter the above queue name and connection factory respectively under ...public final static String JMS_FACTORY=" jms/TestConnectionFactory "; ... public final static String QUEUE=" jms/TestJMSQueue "; ... Compile QueueSend.java using javac QueueSend.java Go to the source’s top-level directory and execute it using java examples.jms.queue.QueueSend t3://jbevans-lx.de.oracle.com:8001 This will prompt for a text input or “quit” to end. In the WLS console, go to the queue and select Monitoring to confirm that a new message was written to the queue. 2.2 From JDeveloper Create a new application in JDeveloper, called, for example JMSTests. When prompted for a project name, enter QueueSend and select Java as the technology Default Package = examples.jms.queue (but you can enter anything here as you will overwrite it in the code later). Leave the other values at their defaults. Press Finish Create a new Java class called QueueSend and use the default values This will create a file called QueueSend.java. Open QueueSend.java, if it is not already open and replace all its contents with the QueueSend java code listed above Some lines might have warnings due to unfound objects. These are due to missing libraries in the JDeveloper project. Add the following libraries to the JDeveloper project: right-click the QueueSend project in the navigation menu and select Libraries and Classpath , then Add JAR/Directory Go to the folder containing the JDeveloper installation and find/choose the file javax.jms_1.1.1.jar , e.g. at D:\oracle\jdev11116\modules\javax.jms_1.1.1.jar Do the same for the weblogic.jar file located, for example in D:\oracle\jdev11116\wlserver_10.3\server\lib\weblogic.jar Now you should be able to compile the project, for example by selecting the Make or Rebuild icons If you try to execute the project, you will get a usage message, as it requires a parameter pointing to the WLS installation containing the JMS queue, for example t3://jbevans-lx.de.oracle.com:8001 . You can automatically pass this parameter to the program from JDeveloper by editing the project’s Run/Debug/Profile. Select the project properties, select Run/Debug/Profile and edit the Default run configuration and add the connection parameter to the Program Arguments field If you execute it again, you will see that it has passed the parameter to the start command If you get a ClassNotFoundException for the class weblogic.jndi.WLInitialContextFactory , then check that the weblogic.jar file was correctly added to the project in one of the earlier steps above. Set the values of JMS_FACTORY and QUEUE the same way as described above in the description of how to use this from a Linux file system, i.e. ...public final static String JMS_FACTORY=" jms/TestConnectionFactory "; ... public final static String QUEUE=" jms/TestJMSQueue "; ... You need to make one more change to the project. If you execute it now, it will prompt for the payload for the JMS message, but you won’t be able to enter it by default in JDeveloper. You need to enable program input for the project first. Select the project’s properties, then Tool Settings, then check the Allow Program Input checkbox at the bottom and Save. Now when you execute the project, you will get a text entry field at the bottom into which you can enter the payload. You can enter multiple messages until you enter “quit”, which will cause the program to stop. The following screen shot shows the TestJMSQueue’s Monitoring page, after a message was sent to the queue: This concludes the sample. In the following post I will show you how to read the message from the queue again.

Read the article

CodePlex Daily Summary for Wednesday, November 02, 2011

CodePlex Daily Summary for Wednesday, November 02, 2011Popular ReleasesWYGIWYS Driver: 1.1.2.0 release: Win32, x86, kernel mode driver.Reset IPv6: 1.0.0.0: First release. Only works for Spanish and English operating system editions.BExplorer (Better Explorer): Better Explorer 2.0.0.631 Alpha: Changelog: Added: Some new functions in ribbon Added: Possibility to choose displayed columns Added: Basic Search Fixed: Some bugs after navigation Fixed: Attempt to fix slow navigation and slow start Known issues: - BreadcrumbBar fails on some situations - Basic search not work quite well in some situations Please if anyone find bugs be kind and report them at the Issue Tracker! Thanks!DotNetNuke® Community Edition: 05.06.04: Major Highlights Fixed issue with upgrades on systems that had upgraded the Telerik library to 6.0.0 Fixed issue with Razor Host upgrade to 5.6.3 The logic for module administration checks contains incorrect logic in 1 place, opening the possibility of a user with edit permissions gaining access to functionality they should not have through a particularly crafted url Security FixesBrowsers support the ability to remember common strings such as usernames/addresses etc. Code was adde...Terminals: Version 2.0 - Beta 2 Release: The team has finally put the nail into the official release date for version 2.0. As bugs are winding down on the 2.0 Roadmap we decided to push out another build - the first 2.0 Beta build. Please take time to use and abuse this release. We left logging in place, and this is a debug build so be sure to submit your logs on each bug reported, and please do report all bugs! Check the source code page on the site, this beta includes all commits since (and including) the 90428 check-in back i...iTuner - The iTunes Companion: iTuner 1.4.4322: Added German (unverified, apologies if incorrect) Properly source invariant resources with correct resIDs Replaced obsolete lyric providers with working providers Fix Pseudolater to correctly morph every third char Fix null reference in CatalogBaseTrack Folder Changes: Track Folder Changes 1.0: Track Folder Changes 1.0 (binary)Windows Workflow Foundation on Codeplex: Microsoft.Activities v1.8.8: Microsoft.Activities Overview How do I install Microsoft.Activities? Updates in this release9318Technical Analysis Engine for .NET: Technical Analysis Engine 1.25: What's new in the 1.25 release (2011-11-01): - Added Williams %R indicator - Added Moving Average Envelopes indicatorBF3Rcon.NET: BF3Rcon 3.0: This release is targeted for RCON documentation based on R3. Everything should be beta stable, but it's alpha because I haven't been able to fully test it. When a stable release is ready, a proper changelog will be kept. Important Edit: There's one method that will keep this from working in Mono. GeneratePasswordHash uses void HashAlgorithm.Dispose(), which isn't in Mono. This will have to be changed to Clear() in the next release. If anyone needs a Mono version of this immediately, you can...BoxWorld: BoxWorld_2011.10.30: BoxWorld - 8.0.1110.30 This is the initial release of BoxWorld. I'd recommend downloading the installer as it contains the compiled code and everything all nicely contained. By default, you end up with this directory structure: C:\Program Files\ViperWorks\BoxWorld C:\Program Files\ViperWorks\BoxWorld\Data C:\Program Files\ViperWorks\BoxWorld\Interface C:\Program Files\ViperWorks\BoxWorld\Source In the root you have the compiled EXE files, one for the main release, one for the LITE release ...VidCoder: 1.2.1: Fixed a couple regressions: video encoder was blank in queue and crashes with the High Profile preset when opening the Settings window. Fixed problem with auto-update introduced in 1.2.0. If you have 1.2.0 you will need to update manually to get this.Koober: Koober - The Ebook Creator 0.2: The official release of Koober as Open source. Koober is a ebook creator for Windows, and Koob Reader is the reader.patterns & practices: Enterprise Library Contrib: Enterprise Library Contrib - 5.0 (Oct 2011): This release of Enterprise Library Contrib is based on the Microsoft patterns & practices Enterprise Library 5.0 core and contains the following: Common extensionsTypeConfigurationElement<T> - A Polymorphic Configuration Element without having to be part of a PolymorphicConfigurationElementCollection. AnonymousConfigurationElement - A Configuration element that can be uniquely identified without having to define its name explicitly. Data Access Application Block extensionsMySql Provider - ...Network Monitor Open Source Parsers: Network Monitor Parsers 3.4.2748: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, NetowrkMonitor_Parsers.msi continues to improve quality and fix bugs. It has included the fo...Media Companion: MC 3.420b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Movies Fixed: Fanart and poster scraping issues TV Shows (Re)Added: Rebuild single show Fixed: Issue when shows are moved from original location Ability to handle " for actor nicknames Crash when episode name contains "<" (does not scrape yet) Clears fanart when switch...patterns & practices - Unity: Unity 3.0 for .NET4.5 Preview: The Unity 3.0.1026.0 Preview enables Unity to work on .NET 4.5 with both the WinRT and desktop profiles. The major changes include: Unity projects updated to target .NET 4.5. Dynamic build plans modified to use compiled lambda expressions instead of Reflection.Emit Converting reflection to use the new TypeInfo for reflection. Projects updated to work with the Microsoft Visual Studio 2011 Preview Notes/Known Issues: The Microsoft.Practices.Unity.UnityServiceLocator class cannot be use...Managed Extensibility Framework: MEF 2 Preview 4: Detailed information on this release is available on the BCL team blog.AcDown????? - Anime&Comic Downloader: AcDown????? v3.6: ?? ● AcDown??????????、??????，??????????????????????，???????Acfun、Bilibili、???、???、???、Tucao.cc、SF???、?????80????，???????????、?????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??????????????，??????????： ??"AcDown?????"????????? ?? v3.6?? ??“????”...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.33: Add JSParser.ParseExpression method to parse JavaScript expressions rather than source-elements. Add -strict switch (CodeSettings.StrictMode) to force input code to ECMA5 Strict-mode (extra error-checking, "use strict" at top). Fixed bug when MinifyCode setting was set to false but RemoveUnneededCode was left it's default value of true.New ProjectsAlgorithms: algorithms, ACM C++ programs, Electronic design automation algorithmsAll-In-One: Ein Programm - Alle Funktionen Einfach Komponente erstellen - und schon gibt es eine Funktion mehr!Bar Code File Copy: Bar Code File Copy is a mobile app that allows user to initiate file transfer from a PC to another with the help of barcodes and Windows Phone 7.BlekBoox: Google Books API CF-Soft: this is my workspace to study C# programming.CodePaste.NET Tray Application: A simple tray application to create snippets on CodePaste.NET. Right click the app and select New Snippet. A snippet will be created, the contents of your clipboard will be pasted and your clipboard will be replaced with the URL after the code snippet is successfully posted.Common libs of fanthos: Fanthos.Libs.Controls provides panel and button with special draw and special events. Fanthos.Libs.Network provides class that you can use the method likes Async WCF in dotNet 2.0.Database Filesystem: The DBFS project implements a filesystem paradigm to the storage of objects in a database. The primary development language is Visual Basic .NET.Destructible Texture2D: The project shows how to create a destructible texture2D in XNA. This project is developed using the XNA framework and C# programming languageEject and Close CD Tray: For some reason i cannot seem to find any command line program to eject or close the cd tray. So i've created my own version and sharing it for everyone to use. It is an extremely simplistic program with the sole aim of ejecting or closing the cd tray and nothing else.Excel add-in for pricing options: Price options using various distributions.FDFToolkit .NET: FDFToolkit .NET makes it easier to read, write, create, populate, merge FDF, XDP, XFDF, and XML data with Acrobat and LiveCycle PDF forms. FDFToolkit.net utilizes iTextSharp 4.x technologies, under MPL license.Fiction Catalog: A catalog project designed to store information about fictional literature.Gangbee Software: This is customized version of Nopcommerce 1.9Guess Number: This simple program is letting you to guess number from 1 to 20. H? th?ng Khách s?n: H? th?ng qu?n lí khách s?nHelloTipi Photo Downloader: Permet de télécharger les photos en qualité original de votre site de famille [url:HelloTipi|http://www.hellotipi.com].Image Tagger & Resizer: Resize, and text in the lower right of picture with i.e. copyright information.Kinect Sensor Controller: A project using kinect sensor to control objectsKJFramework.Dynamic ??????: KJFramework.Dynamic ???????? KJFramework????????????????????，?????????: KJFramework.Dynamic(??????). ???????????????????????，???????????????，?????????， ????????????????????，????，???????????????，??????????(??，???????)。 ????，?????????????????????(Component), ??????DynamicDomainComponent??。 ??，????????????，???????????DynamicDomainService??。 ??????，???????????? ???????DynamicDomainService。 ??DynamicDomainService??，????????????????。 ?????, ????????????(Tunnel)???，??????(Tunnel)...Lan ETS Player Registration Software: This is the custom software that the Lan ETS staff uses to register people when they arrive at the LAN party.LINQ to Calil: LINQ to Calil ????? (http://calil.jp/) ???????? API ? LINQ ????????。???????????? LINQ ???????????????。.NET Framework 4 ???????、Silverlight ??????????。 LINQ to Calil ??????????????????????????????????????。Login Form in VB: <project name> makes it easier for <target user group> to <activity>. You'll no longer have to <activity>. It's developed in <programming language>.MbpGpsTester: MbpGpsTester is a gps test tool.Mi proyecto: Mi proyectoMy NuGET Packages: This project contains a custom program that allows you to quickly update NuGET packages from multiple sources and package feeds. It also contains set-up of some packages that are used by HydroDesktop.MyyoutubeforWp7: MyyoutubeforWp7 is a youtube application where users can search and view the videoNERO'S TOOLS: NEROS TOOLS will be an area of programming tools and resources for the automation control industry and the everyday usage of major control systems software.NetWebScript: NetWebScript is a IL to JavaScript compiler. It allow to write complex web application in C# or any other .Net language. It provide Visual Studio integration to debug into orginial sources. It allow to share code with server.Northern Lights WP7 Toolkit: Northern Lights WP7 Toolkit contains some common tools for WP7 Developers.SccmBoundaryHealthTool: .NET application that will search the AD forest for SCCM boundary configurations and report the following: * Overlapping boundaries, including those inter-boundary type, e.g. IP subnet overlaps with AD site. * Unassigned AD sites * Orphaned AD sites in SCCMSeven: Seven is a set of tools for programs development using the Oberon 07 language. SOAP Test Application (with EWS Tools): Application that allows testing of SOAP implementations, in particular Exchange Web Services.SocialCastDotNet: C# library for accessing the SocialCast APISosyal: Sosyal as.sqlce_perfDemo: just a bit of code to demonstrate sqlce insert performance on the desktop. I'm using sqlce on the desktop to persist data as its the fastest thing I can find. Insert perfromance seems to top out at around 65,000records/sec on my laptop but it also seems to limited at this point by my hard drive speeds. The sample code should be able to accept a dataTable, dataReader or dataset and persit to a sqlce database. Also in the code is a small wrapper on the sqlce connectionstring (localconne...SqlMon for OracleClient: This is a project to doing a tool just like Quest SQL Monitor that capture sql sentence in client side.So it's so cool that juect join in and user it. It's developed in C# and Visual Studio 2010 and bases on the EasyHook that is a powerfull .NET hook library.It injects in oci.dll and hook the "OCIStmtPrepare" function which excute before sql excuting,through the parameter "stms" we can get the sqltext and display itStackOverflow Offline Reader using a pdf reader: Using one or more keywords and number of questions to download, the app creates and displays a single pdf file of the questions and answers pertaining to the keyword(s). This enables the user to read questions in an offline manner or to read in a top/down fashion. std::streambuf wrapper for COM IStream: This provides a subclass of std::streambuf that wraps a COM IStream, so you can use an IStream with any C++ code that uses iostreams or the STL algorithms with a streambuf_iterator. It does no internal buffering whatsoever (I'd be happy to change this if someone needs it).step out ring signatures .net: Simple program to demonstrate how srs works in real world of .net.System Center Service Manager 2010 SP1 WCF and Web Service: Simple WCF Service and Web Service for SCSM 2010 SP1.System32 - SDK de componentes y acceso a datos para .NET: System32 - SDK de componentes y acceso a datos para .NET Taha Mail: A Java Web Based MailTest TDS: Test TFS - 1Track Folder Changes: Displays in real time a tree with the list of created/deleted/changed files in a specific directory and its subdirectoriesumbTrafficCentral: A plugin for Umbraco that adds robust and scalable handling of redirects, storing the data in the media library. WebDAV Test Application: Application to test WebDAV functionality.XnaXaml: XnaXaml allows you to add a XAML file to your Content Pipeline in XNA and edit straight from Visual Studio. It then takes the XAML file and parses through it to create mock objects that can be used to render controls to the screen in XNA. These mock objects can also be used to pass data to any GUI system you choose.???-?????????? ?? ????????????? ????????? ??????????? ??????? ???: Under construction

Read the article

Why should main() be short?

- by Stargazer712

I've been programming for over 9 years, and according to the advice of my first programming teacher, I always keep my main() function extremely short. At first I had no idea why. I just obeyed without understanding, much to the delight of my professors. After gaining experience, I realized that if I designed my code correctly, having a short main() function just sortof happened. Writing modularized code and following the single responsibility principle allowed my code to be designed in "bunches", and main() served as nothing more than a catalyst to get the program running. Fast forward to a few weeks ago, I was looking at Python's souce code, and I found the main() function: /* Minimal main program -- everything is loaded from the library */ ... int main(int argc, char **argv) { ... return Py_Main(argc, argv); } Yay Python. Short main() function == Good code. Programming teachers were right. Wanting to look deeper, I took a look at Py_Main. In its entirety, it is defined as follows: /* Main program */ int Py_Main(int argc, char **argv) { int c; int sts; char *command = NULL; char *filename = NULL; char *module = NULL; FILE *fp = stdin; char *p; int unbuffered = 0; int skipfirstline = 0; int stdin_is_interactive = 0; int help = 0; int version = 0; int saw_unbuffered_flag = 0; PyCompilerFlags cf; cf.cf_flags = 0; orig_argc = argc; /* For Py_GetArgcArgv() */ orig_argv = argv; #ifdef RISCOS Py_RISCOSWimpFlag = 0; #endif PySys_ResetWarnOptions(); while ((c = _PyOS_GetOpt(argc, argv, PROGRAM_OPTS)) != EOF) { if (c == 'c') { /* -c is the last option; following arguments that look like options are left for the command to interpret. */ command = (char *)malloc(strlen(_PyOS_optarg) + 2); if (command == NULL) Py_FatalError( "not enough memory to copy -c argument"); strcpy(command, _PyOS_optarg); strcat(command, "\n"); break; } if (c == 'm') { /* -m is the last option; following arguments that look like options are left for the module to interpret. */ module = (char *)malloc(strlen(_PyOS_optarg) + 2); if (module == NULL) Py_FatalError( "not enough memory to copy -m argument"); strcpy(module, _PyOS_optarg); break; } switch (c) { case 'b': Py_BytesWarningFlag++; break; case 'd': Py_DebugFlag++; break; case '3': Py_Py3kWarningFlag++; if (!Py_DivisionWarningFlag) Py_DivisionWarningFlag = 1; break; case 'Q': if (strcmp(_PyOS_optarg, "old") == 0) { Py_DivisionWarningFlag = 0; break; } if (strcmp(_PyOS_optarg, "warn") == 0) { Py_DivisionWarningFlag = 1; break; } if (strcmp(_PyOS_optarg, "warnall") == 0) { Py_DivisionWarningFlag = 2; break; } if (strcmp(_PyOS_optarg, "new") == 0) { /* This only affects __main__ */ cf.cf_flags |= CO_FUTURE_DIVISION; /* And this tells the eval loop to treat BINARY_DIVIDE as BINARY_TRUE_DIVIDE */ _Py_QnewFlag = 1; break; } fprintf(stderr, "-Q option should be `-Qold', " "`-Qwarn', `-Qwarnall', or `-Qnew' only\n"); return usage(2, argv[0]); /* NOTREACHED */ case 'i': Py_InspectFlag++; Py_InteractiveFlag++; break; /* case 'J': reserved for Jython */ case 'O': Py_OptimizeFlag++; break; case 'B': Py_DontWriteBytecodeFlag++; break; case 's': Py_NoUserSiteDirectory++; break; case 'S': Py_NoSiteFlag++; break; case 'E': Py_IgnoreEnvironmentFlag++; break; case 't': Py_TabcheckFlag++; break; case 'u': unbuffered++; saw_unbuffered_flag = 1; break; case 'v': Py_VerboseFlag++; break; #ifdef RISCOS case 'w': Py_RISCOSWimpFlag = 1; break; #endif case 'x': skipfirstline = 1; break; /* case 'X': reserved for implementation-specific arguments */ case 'U': Py_UnicodeFlag++; break; case 'h': case '?': help++; break; case 'V': version++; break; case 'W': PySys_AddWarnOption(_PyOS_optarg); break; /* This space reserved for other options */ default: return usage(2, argv[0]); /*NOTREACHED*/ } } if (help) return usage(0, argv[0]); if (version) { fprintf(stderr, "Python %s\n", PY_VERSION); return 0; } if (Py_Py3kWarningFlag && !Py_TabcheckFlag) /* -3 implies -t (but not -tt) */ Py_TabcheckFlag = 1; if (!Py_InspectFlag && (p = Py_GETENV("PYTHONINSPECT")) && *p != '\0') Py_InspectFlag = 1; if (!saw_unbuffered_flag && (p = Py_GETENV("PYTHONUNBUFFERED")) && *p != '\0') unbuffered = 1; if (!Py_NoUserSiteDirectory && (p = Py_GETENV("PYTHONNOUSERSITE")) && *p != '\0') Py_NoUserSiteDirectory = 1; if ((p = Py_GETENV("PYTHONWARNINGS")) && *p != '\0') { char *buf, *warning; buf = (char *)malloc(strlen(p) + 1); if (buf == NULL) Py_FatalError( "not enough memory to copy PYTHONWARNINGS"); strcpy(buf, p); for (warning = strtok(buf, ","); warning != NULL; warning = strtok(NULL, ",")) PySys_AddWarnOption(warning); free(buf); } if (command == NULL && module == NULL && _PyOS_optind < argc && strcmp(argv[_PyOS_optind], "-") != 0) { #ifdef __VMS filename = decc$translate_vms(argv[_PyOS_optind]); if (filename == (char *)0 || filename == (char *)-1) filename = argv[_PyOS_optind]; #else filename = argv[_PyOS_optind]; #endif } stdin_is_interactive = Py_FdIsInteractive(stdin, (char *)0); if (unbuffered) { #if defined(MS_WINDOWS) || defined(__CYGWIN__) _setmode(fileno(stdin), O_BINARY); _setmode(fileno(stdout), O_BINARY); #endif #ifdef HAVE_SETVBUF setvbuf(stdin, (char *)NULL, _IONBF, BUFSIZ); setvbuf(stdout, (char *)NULL, _IONBF, BUFSIZ); setvbuf(stderr, (char *)NULL, _IONBF, BUFSIZ); #else /* !HAVE_SETVBUF */ setbuf(stdin, (char *)NULL); setbuf(stdout, (char *)NULL); setbuf(stderr, (char *)NULL); #endif /* !HAVE_SETVBUF */ } else if (Py_InteractiveFlag) { #ifdef MS_WINDOWS /* Doesn't have to have line-buffered -- use unbuffered */ /* Any set[v]buf(stdin, ...) screws up Tkinter :-( */ setvbuf(stdout, (char *)NULL, _IONBF, BUFSIZ); #else /* !MS_WINDOWS */ #ifdef HAVE_SETVBUF setvbuf(stdin, (char *)NULL, _IOLBF, BUFSIZ); setvbuf(stdout, (char *)NULL, _IOLBF, BUFSIZ); #endif /* HAVE_SETVBUF */ #endif /* !MS_WINDOWS */ /* Leave stderr alone - it should be unbuffered anyway. */ } #ifdef __VMS else { setvbuf (stdout, (char *)NULL, _IOLBF, BUFSIZ); } #endif /* __VMS */ #ifdef __APPLE__ /* On MacOS X, when the Python interpreter is embedded in an application bundle, it gets executed by a bootstrapping script that does os.execve() with an argv[0] that's different from the actual Python executable. This is needed to keep the Finder happy, or rather, to work around Apple's overly strict requirements of the process name. However, we still need a usable sys.executable, so the actual executable path is passed in an environment variable. See Lib/plat-mac/bundlebuiler.py for details about the bootstrap script. */ if ((p = Py_GETENV("PYTHONEXECUTABLE")) && *p != '\0') Py_SetProgramName(p); else Py_SetProgramName(argv[0]); #else Py_SetProgramName(argv[0]); #endif Py_Initialize(); if (Py_VerboseFlag || (command == NULL && filename == NULL && module == NULL && stdin_is_interactive)) { fprintf(stderr, "Python %s on %s\n", Py_GetVersion(), Py_GetPlatform()); if (!Py_NoSiteFlag) fprintf(stderr, "%s\n", COPYRIGHT); } if (command != NULL) { /* Backup _PyOS_optind and force sys.argv[0] = '-c' */ _PyOS_optind--; argv[_PyOS_optind] = "-c"; } if (module != NULL) { /* Backup _PyOS_optind and force sys.argv[0] = '-c' so that PySys_SetArgv correctly sets sys.path[0] to '' rather than looking for a file called "-m". See tracker issue #8202 for details. */ _PyOS_optind--; argv[_PyOS_optind] = "-c"; } PySys_SetArgv(argc-_PyOS_optind, argv+_PyOS_optind); if ((Py_InspectFlag || (command == NULL && filename == NULL && module == NULL)) && isatty(fileno(stdin))) { PyObject *v; v = PyImport_ImportModule("readline"); if (v == NULL) PyErr_Clear(); else Py_DECREF(v); } if (command) { sts = PyRun_SimpleStringFlags(command, &cf) != 0; free(command); } else if (module) { sts = RunModule(module, 1); free(module); } else { if (filename == NULL && stdin_is_interactive) { Py_InspectFlag = 0; /* do exit on SystemExit */ RunStartupFile(&cf); } /* XXX */ sts = -1; /* keep track of whether we've already run __main__ */ if (filename != NULL) { sts = RunMainFromImporter(filename); } if (sts==-1 && filename!=NULL) { if ((fp = fopen(filename, "r")) == NULL) { fprintf(stderr, "%s: can't open file '%s': [Errno %d] %s\n", argv[0], filename, errno, strerror(errno)); return 2; } else if (skipfirstline) { int ch; /* Push back first newline so line numbers remain the same */ while ((ch = getc(fp)) != EOF) { if (ch == '\n') { (void)ungetc(ch, fp); break; } } } { /* XXX: does this work on Win/Win64? (see posix_fstat) */ struct stat sb; if (fstat(fileno(fp), &sb) == 0 && S_ISDIR(sb.st_mode)) { fprintf(stderr, "%s: '%s' is a directory, cannot continue\n", argv[0], filename); fclose(fp); return 1; } } } if (sts==-1) { /* call pending calls like signal handlers (SIGINT) */ if (Py_MakePendingCalls() == -1) { PyErr_Print(); sts = 1; } else { sts = PyRun_AnyFileExFlags( fp, filename == NULL ? "<stdin>" : filename, filename != NULL, &cf) != 0; } } } /* Check this environment variable at the end, to give programs the * opportunity to set it from Python. */ if (!Py_InspectFlag && (p = Py_GETENV("PYTHONINSPECT")) && *p != '\0') { Py_InspectFlag = 1; } if (Py_InspectFlag && stdin_is_interactive && (filename != NULL || command != NULL || module != NULL)) { Py_InspectFlag = 0; /* XXX */ sts = PyRun_AnyFileFlags(stdin, "<stdin>", &cf) != 0; } Py_Finalize(); #ifdef RISCOS if (Py_RISCOSWimpFlag) fprintf(stderr, "\x0cq\x0c"); /* make frontend quit */ #endif #ifdef __INSURE__ /* Insure++ is a memory analysis tool that aids in discovering * memory leaks and other memory problems. On Python exit, the * interned string dictionary is flagged as being in use at exit * (which it is). Under normal circumstances, this is fine because * the memory will be automatically reclaimed by the system. Under * memory debugging, it's a huge source of useless noise, so we * trade off slower shutdown for less distraction in the memory * reports. -baw */ _Py_ReleaseInternedStrings(); #endif /* __INSURE__ */ return sts; } Good God Almighty...it is big enough to sink the Titanic. It seems as though Python did the "Intro to Programming 101" trick and just moved all of main()'s code to a different function called it something very similar to "main". Here's my question: Is this code terribly written, or are there other reasons reasons to have a short main function? As it stands right now, I see absolutely no difference between doing this and just moving the code in Py_Main() back into main(). Am I wrong in thinking this?

Search Results

Search found 1331 results on 54 pages for 'copyright'.

Page 49/54 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 | Next Page >

- by ADTC

- by Anthony Glyadchenko

- by cdotlister

- by elio.d

- by cdotlister

- by Sompom

- by René Nyffenegger

- by Java Drinker

- by banshee_walk_sly

- by cs221313

- by GRB

- by JRC

- by DS_web_developer

- by Liu Maclean(???)

- by Liu Maclean(???)

- by ??-Oracle

- by Balázs Béla

- by A Student at a University

- by Shaun

- by sreejukg

- by penner

- by John-Brown.Evans

- by Stargazer712

< Previous Page | 45 46 47 48 49 50 51 52 53 54 | Next Page >