Search Results

Search found 7694 results on 308 pages for 'dev cu'.

Page 49/308 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

• Resize underlying partitions in mdadm RAID1

  - by kyork

  I have a home built NAS, and I need to slightly reconfigure some of my drive usage. I have an mdadm RAID1 composed of two 3TB drives. Each drive has one ext3 partition that uses the entire drive. I need to shrink the ext3 partition on both drives, and add a second 8GB or so ext3 partition to one, and swap partition of equal size to the other. …

  Read the article

• 1Tb disk formatted on Linux won't mount on windows nor mac

  - by Pedro MC

  I have an external HD (western digital) with 1Tb. I use Linux but I wanted to reserve a cross platform partition on the disk. I decided to create two partitions and used the "disks" application to do it. I created one partition with the LUKS (version 1) encryption and the other one, cross platform, in NTFS filesystem. Things work fine on my OS but…

  Read the article

• How to setup nginx and a subdomain

  - by Evolutio

  i have gitlab installed on my server and it works on all domains eg: git.lars-dev.de, lars-dev.de and *.lars-dev.de how I can run gitlab only on git.lars-dev.de and another subdomain on files.lars-dev.de? my lars-dev conf: server { listen *:80; ## listen for ipv4; this line is default and implied #listen [::]:80 default_server…

  Read the article

• No space left on device with encrypted disk that takes all space

  - by Yosef

  I use Ubuntu 11.04. There's no space left on device. I have encrypted the disk that takes up space (maybe it's good to disable it, but I don't know how). In shell, I get this message: No space left on device I run df -I: Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda1 3055616 602499 2453117 …

  Read the article

• Mac OSX Server 10.6 DNS Issues

  - by dallasclark

  Hi, The server was upgraded from 10.5 from 10.6, during the upgrade the Reverse Zones were lost so I tried to recreate these but found that it's best to delete all zones, definitions and start again. So I've started again and Reverse Zones are appearing but I'm still having issues. I receive the following errors (if they help) …

  Read the article

• Retrieving a specific value from “df -h” using shell

  - by diegodias

  When I use df -h, I get the following output: Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 59G 2.2G 54G 4% / /dev/sda1 122M 38M 78M 33% /boot tmpfs 1.1G 0 1.1G 0% /dev/shm 10.10.0.105:/somepath…

  Read the article

• OS X 10.6 Snow Leopard no longer mounting an external USB drive

  - by Brant Bobby

  I have a 1TB generic external hard drive containing a single HFS partition. I originally formatted this using Disk Utility and it worked fine. Now, for some reason, it's not auto-mounting when I start up. Using mount at the command line gives the following error: $ sudo mount /dev/disk1s2 /Volumes/Test /dev/disk1s2 on…

  Read the article

• What can I do to give some more love and disk space to my database on Ubuntu?

  - by Yaron Naveh

  I'm new to linux. I've deployed a db to ubuntu server on amazon and found out I'm low on disk space. did df (see below) - and found out that I'm 89% capacity on one file system, but less on others. What does this mean? Do I have a few partitions and can now utilize others besides /dev/xvda1? Also /dev/xvdb seems large,…

  Read the article

• smartctl or hddtemp for xvda [on hold]

  - by HST

  I'm trying to check the state of the drives on a remote server running Debian wheezy. I'm using a software RAID10 on top of, I guess, xen, since the entries in /dev are /dev/xvda and /dev/xvdb But it I try smartctl -a /dev/xvda I get /dev/xvda: Unable to detect device type Smartctl: please specify device…

  Read the article

• Mac OSX Server 10.6 DNS Issues

  - by dallasclark

  The server was upgraded from 10.5 from 10.6, during the upgrade the Reverse Zones were lost so I tried to recreate these but found that it's best to delete all zones, definitions and start again. So I've started again and Reverse Zones are appearing but I'm still having issues. I receive the following errors (if they…

  Read the article

• Repartition Ubuntu by command line?

  - by DisgruntledGoat

  On my server the filesystem includes these partitions: Filesystem Size Used Avail Use% Mounted on /dev/sda6 4.6G 929M 3.5G 21% / /dev/sda5 76M 20M 53M 27% /boot /dev/sda8 449G 199M 426G 1% /home /dev/sda7 4.6G 4.4G 0 100% /var (Output from…

  Read the article

• Calculate minimum ext3 partition size for certain amount of data

  - by Daniel Beck

  These following ext3 partitions contain identical data. As we can see, the larger the partition size, the more space is required for the same files: Filesystem 1K-blocks Used Available Use% Mounted on /dev/loop11 3965777 561064 3199964 15% [...] /dev/loop19 573029 543843 …

  Read the article

• What are "build-essential" & "build-dep"?

  - by Adam Siddhi

  I am researching how to install Ruby 1.9.1 in Xubuntu 10.04 and I came across the command build-essential and build-dep multiple times. Sometimes it is followed by packages and sometimes it is both preceded and post-ceded by packages. The 2 examples I am looking at are: sudo apt-get install build-essential …

  Read the article

• flashcache with mdadm and LVM

  - by Backtogeek

  I am having trouble setting up flashcache on a system with LVM and mdadm, I suspect I am either just missing an obvious step or getting some mapping wrong and hoped someone could point me in the right direction? system info: CentOS 6.4 64 bit mdadm config md0 : active raid1 sdd3[2] sde3[3] sdf3[4] sdg3[5]…

  Read the article

• Disk is apparently in use by the system

  - by Shaun

  I've just fitted two disks to my home server. I'm trying to format and then raid them but I'm getting a problem that hours of Googling hasn't resolved this. The error that I'm getting is: # mkfs.ext3 /dev/sdb1 mke2fs 1.39 (29-May-2006) /dev/sdb1 is apparently in use by the system; will not make a…

  Read the article

• How to use second volume devide of amazon EC2

  - by Khoyendra Pande

  I have two volumes of amazon EC2 where by default 1 GiB volume using which has fulled. Now I want to use my second volume which is 9 Gim. I used command cat /proc/partitions I got major minor #blocks name 202 1 1048576 xvda1 202 80 9437184 xvdf Then I hit mkfs.ext3 -F /dev/sdf…

  Read the article

• Reshape linux md raid5 that is already being reshaped?

  - by smammy

  I just converted my RAID1 array to a RAID5 array and added a third disk to it. I'd like to add a fourth disk without waiting fourteen hours for the first reshape to complete. I just did this: mdadm /dev/md0 --add /dev/sdf1 mdadm --grow /dev/md0 --raid-devices=3 --backup-file=/root/md0_n3.bak The…

  Read the article

• Retrieving a specific value from "df -h" using shell

  - by Diego Dias

  When I use df -h, I get the following output: Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 59G 2.2G 54G 4% / /dev/sda1 122M 38M 78M 33% /boot tmpfs 1.1G 0 1.1G 0%…

  Read the article

• df says disk is full, but it is not

  - by Chris

  On a virtualized server running Ubuntu 10.04, df reports the following: # df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 7.4G 7.0G 0 100% / none 498M 160K 498M 1% /dev none 500M 0 500M 0% /dev/shm none …

  Read the article

• slow software raid

  - by Jure1873

  I've got software raid 1 for / and /home and it seems I'm not getting the right speed out of it. Reading from md0 I get around 100 MB/sec Reading from sda or sdb I get around 95-105 MB/sec I thought I would get more speed (while reading data) from two drives. I don't know what is the problem.…

  Read the article

• URGENT: help recovering lost data

  - by Niels Kristian

  I have made a directory: sudo mkdir /ssd, the directory was supposed to be mounted to a raid array called md3. This was done by adding /dev/md3 /ssd auto defaults 0 0 to fstab. Then after a while where I had used the directory, I realized that I had forgotten to run sudo mount -a - and then I…

  Read the article

• wamp alias appearing in localhost instead of another

  - by tournskeud

  I created various aliases on Wamp to be able to work on my different projects. Strangely, one of my alias is visible when I call the other. They have the same ".conf" file : Example : ##### ## x.dev ## DOMAINE x ##### NameVirtualHost x.dev <VirtualHost x.dev> DocumentRoot…

  Read the article

• Can't recover hard drive

  - by BreezyChick89

  My drive got corrupt after a thunderstorm. It used to be 1 partition of 2.5tb but now it shows 2 partitions. It's weird because 300gig free space is about how much it had before corrupting, but it was part of the first partition. I tried $ sudo resize2fs -f /dev/sdb1 Resizing the…

  Read the article

• Can't boot Windows after installing Linux

  - by user4035

  I have a partition /dev/sdb1, where my old Windows XP resides. All the files are there intact and I can see them, mounting the disk from Linux. Linux is on /dev/sdb2. But when I choose Windows in LILO prompt, it doesn't load. I have the following lilo.conf: boot = /dev/sdb # Linux…

  Read the article

• Which rdisk value in boot.ini maps to which disk?

  - by MA1

  Following are the contents of a sample boot.ini: [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /NOEXECUTE=OPTIN /FASTDETECT…

  Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >