Search Results

Search found 2240 results on 90 pages for 'dr nic'.

Page 49/90 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

  • Network access lags for Win7 when server network utilization is high

    - by Jeff Miles
    We have a Dell PE2950 file server running Windows 2008, hosting a DFS namespace of ~1.2 TB. This server has two Broadcom 1Gbps NICs teamed together. When there is high traffic going to the server across the network (greater than 200 Mbps), any Windows 7 client accessing a DFS share at the time experiences severe performance problems. For example: Computer A has an AutoCAD drawing opened directly from the DFS share. Performance is normal, not causing any issues. Computer B begins a file transfer, putting a 11GB file onto a different DFS namespace, on the same server Computer A immediately notices lag while using AutoCAD. The cursor momentarily freezes within AutoCAD every 10 seconds or so, and any browsing of the DFS share is extremely slow. Computer B completes file transfer, and performance resumes to normal for Computer A. This is only affecting Windows 7 clients, using a variety of hardware (desktop + laptop). All of our Windows XP clients see no performance impact during the file transfer. Things I have tried with no change: Had Computer A work from an entirely different RAID array from the file transfer destination Updated NIC drivers on clients and server Enabled TCP offload and receive side scaling on the server NIC (previously disabled when the issue began) Antivirus disabled during file transfer I am currently having a user test applications other than AutoCAD when the file transfer occurs, and will update the question with that result. Does anyone have any recommendations for resolution or additional troubleshooting steps?

    Read the article

  • How important is dual-gigabit lan for a super user's home NAS?

    - by Andrew
    Long story short: I'm building my own home server based on Ubuntu with 4 drives in RAID 10. Its primary purpose will be NAS and backup. Would I be making a terrible mistake by building a NAS Server with a single Gigabit NIC? Long story long: I know the absolute max I can get out of a single Gigabit port is 125MB/s, and I want this NAS to be able to handle up to 6 computers accessing files simultaneously, with up to two of them streaming video. With Ubuntu NIC-bonding and the performance of RAID 10, I can theoretically double my throughput and achieve 250MB/s (ok, not really, but it would be faster). The drives have an average read throughput of 83.87MB/s according to Tom's Hardware. The unit itself will be based on the Chenbro ES34069-BK-180 case. With my current hardware choices, it'll have this motherboard with a Core i3 CPU and 8GB of RAM. Overkill, I know, but this server will be doing other things as well (like transcoding video). Unfortunately, the only Mini-ITX boards I can find with dual-gigabit and 6 SATA ports are Intel Atom-based, and I need more processing power than an Atom has to offer. I would love to find a board with 6 SATA ports and two Gigabit LAN ports that supports a Core i3 CPU. So far, my search has come up empty. Thus, my dilemma. Should I hold out for such a board, go with an Atom-based solution, or stick with my current single-gigabit configuration? I know there are consumer NAS units with just one gigabit interface (probably most of them), but I think I will demand a lot more from my server than the average home user. Any advice is appreciated. Thanks.

    Read the article

  • Monitor mode 802.11 captures on OSX

    - by Mike A
    I'm trying to determine the difference between capturing 802.11 frames in the following ways on OSX (10.8.5). It's a bit esoteric, but I use "Option 2" to capture frames for later analysis, and am wondering if I'm missing something. Option 1: use "airportd": $sudo /usr/libexec/airportd en0 sniff Option 2: use "airport" followed by tcpdump: sudo /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resources/airport --channel= sudo tcpdump -I -P -i en0 -w /tmp/capture.pcap (or alternatvely eliminate the -w and watch packets real-time). From what I can tell: Both commands, according to the wifi icon on OSX, put the interface into 'monitor' mode. Both commands output a pcap file that is readable in both wireshark/tcpdump & Eye PA. Both commands appear to capture management, control and data frames. The rub: Option 1 disconnects you from the network. This is expected, when putting an interface into 'monitor' mode. Option 2 does NOT disconnect you, provided you've set the channel to the same channel your currently connected to. This has a distinct advantage of keeping your connection up while capturing in monitor mode. My question: Option 2 does not seem like it should work, or more specifically, it does not seem like I should be able to remain connected while also capturing frames in monitor mode. On a wired NIC, you can be 'promiscuous' and still send frames, though I didn't think the same was true for wireless NIC. I'm questioning the validity of capturing frames w/ Option 2?

    Read the article

  • VLAN for WiFi traffic separation (new to VLANing)

    - by Philip
    I run a school network with switches in different departments. All is routed through to a central switch to access the servers. I would like to install WiFi access points in the different departments and have this routed through the firewall (an Untangle box that can captive-portal the traffic, to provide authentication) before it gets onto the LAN or to the Internet. I know that the ports that the APs connect to on the relevant switches need to be set to a different VLAN. My question is how do I configure these ports. Which are tagged? Which are untagged? I obviously don't want to interrupt normal network traffic. Am I correct in saying: The majority of the ports should be UNTAGGED VLAN 1? Those that have WiFi APs attached should be UNTAGGED VLAN 2 (only) The uplinks to the central switch should be TAGGED VLAN 1 and TAGGED VLAN 2 The central switch's incoming ports from the outlying switches should also be TAGGED VLAN 1 and TAGGED VLAN 2 There will be two links to the firewall (each on its own NIC), one UNTAGGED VLAN 1 (for normal internet access traffic) and one UNTAGGED VLAN 2 (for captive portal authentication). This does mean that all wireless traffic will be routed over a single NIC which will also up the workload for the firewall. At this stage, I'm not concerned about that load.

    Read the article

  • Weirdly high ping on direct ethernet connection?

    - by Antriel
    I bought new Lenovo IdeaCentre H430 pc and I'm having problem with high pings. Windows 7 with on-board realtek NIC. Fresh install, fully updated, drivers installed from included CD. When I start pinging router (direct 1Gb ethernet connection, 1 hop), pings start at <1ms (which is fine) and after a while they jump to 300-1000ms. I loaded up live ubuntu to test if the problem might be in HW. It's not, in ubuntu pings were always <1ms. I also noticed that when I start using connection somehow, pings go down to 1ms, but go back up when I stop using it (tested by accessing live camera feed on LAN). Power Options set to max performance. I disabled Interrupt Moderation on the NIC, didn't help. I tested it in the safe mode with networking, same problem there. It slows down our client-server based programs and I have no idea what's causing it. All I could google up was that disabling Interrupt Moderation would help, it didn't though. Anyone had similar problems? tl;nr: Computer is giving high pings to router when idle and normal pings when network is under load, it slows down our software significantly.

    Read the article

  • Gigabit LAN not working on ASUS M2N-MX

    - by chmod
    Today I replace my FastEthernet switch with a newly bought gigabit switch (DGS-1008A). All computers in my house are displaying that the connection speed is 1 Gbps except for one. The computer that is not working is an ASUS M2N-MX which contain an onboard gigabit NIC. See ASUS link for confirmation http://www.asus.com/Motherboards/AMD_AM2/M2NMX/ Here are some info of the machine OS: Windows 7 Ultimate SP1 64bit BIOS version: 1004 (latest) Driver: installed via Windows update (latest from Windows update) Windows Update: fully updated The machine is reformatted 3 days ago, so it's pretty clean, no junk, no virus, etc Cable: Amp CAT5E 5 meters In device manager, the name of the NIC is "NVIDIA nForce 10/100/1000 Mbps Ethernet" What I have try: I did try to install the driver provided in ASUS website, but there isn't any for Windows 7 64 or Vista 64. I did try to install the latest nForce340/6100, downloaded from Nvidia website. However, the LAN driver refuse to install, it complain that I already have the best driver installed. I looking in the property -- advance tab -- Speed/duplex settings, in an attempt to force it to run at 1000Mbps, but there is no 1000Mbps choice, only 10 and 100Mpbs. I change the CAT5E cable (use one from another computer that is running gigabit without problem) Anyone have this issue or know how to solve it? Thanks

    Read the article

  • esx5 debian VM vlan setup

    - by Kstro21
    i have a server with ESX5, have a switch with about 20 vlans, this is how setup the trunk port interface GigabitEthernet0/1/1 description ToOper port link-type trunk undo port trunk allow-pass vlan 1 port trunk allow-pass vlan 2 to 14 stp disable ntdp enable ndp enable bpdu enable then, i created a standar switch(sw1) using the vSphere Client, the VLAN ID is set to All (4095), i also created a VM with Debian 6, with a NIC connected to sw1, now, i want to configure this NIC for a selected group of vlans auto vlan10 iface vlan10 inet static address 11.10.1.0 netmask 255.255.255.224 mtu 1500 vlan_raw_device eth0 auto vlan14 iface vlan14 inet static address 11.10.1.65 netmask 255.255.255.248 mtu 1500 vlan_raw_device eth0 so, when i restart the network using /etc/init.d/networking restart, i got this error Reconfiguring network interfaces...SIOCSIFADDR: No such device vlan14: ERROR while getting interface flags: No such device SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device vlan14: ERROR while getting interface flags: No such device SIOCSIFMTU: No such device vlan14: ERROR while getting interface flags: No such device Failed to bring up vlan14. done. this is just part of the error, so, my questions is: is this possible?, i mean, what i'm trying to achieve using ESX Virtual Machines, VLANS, etc is this a Debian problem? can be solved? i've read about a file named z25_persistent-net.rules in Debian but it doesn't exist in my installation. in the In the vSphere Networking for ESX5 guide, you can read: If you enter 0 or leave the option blank, the port group can see only untagged (non-VLAN) traffic. If you enter 4095, the port group can see traffic on any VLAN while leaving the VLAN tags intact. So, in theory, it should work, right? Hope you can help me up with this one Thanks

    Read the article

  • Remote Desktop fails after VPN connection

    - by Samet Sorgut
    The local computer (comp 1) is connected to a remote computer (comp 2) with Remote Desktop. On the remote computer (comp 2), I try to establish an VPN connection to a different remote computer (comp 3). Once I try to establish the VPN connection from the remote computer (comp 2) to the second remote computer (comp 3), Remote Desktop freezes on comp 1. It is not possible to connect to comp 2 again via Remote Desktop. What can be done to connect to this remote computer (comp 2) after it establishes a VPN connection? The only thing that comes to my mind is to install a second NIC and configure Remote Desktop to accept connection from this NIC while VPN is working from the other... What do you suggest? EDIT: I want to use the internet connection of the VPN, so all traffic should go over the VPN but still RDP working. My IP: 100.0.0.1 The IP where I'm connecting via RDP: 200.0.0.20 (Mask: 255.255.255.192, Gateway: 200.0.0.193) Where the 200.0.0.1 connects to VPN the IP of the VPN is: 65.254.61.250 Will routing like this help (Command is issued in 200.0.0.20, the RDP location): route ADD 65.254.61.250 MASK 255.255.255.192 200.0.0.193 Couldn't add gives the error: The route addition failed: The parameter is incorrect. I tried before connecting to VPN.

    Read the article

  • sbs-server with 2 nics and 2 connections to the internet with different providers not working as it

    - by erik-van-gorp
    We have the following configuration : A sbs-2003 server in a domain (mydomain.com) with 2 network cards, each connected to a different network (provider), with different gateways, one for web and one for mail and clients. (we do this because the bandwitdh we get from our providers is too small to handle all the mail(+spam) traffic and webservices, so we took 2 providers) DNS is as follows : www.mydomain.com 1.2.3.4 mail.mydomain.com 5.6.7.8 NIC 1(192.168.1.3) is connected to to the internet through a firewall at 192.168.1.1, having wan address 1.2.3.4 NIC 2(10.0.0.3) is connected to to the internet through a firewall at 10.0.0.1, having wan address 5.6.7.8 Both nics have their default gateway installed at their corresponding routers. Also the metrics are set equal. (i know this isn't a supported config, but it works more or less). In this configuration i can use RDP on both wan adresses, and telnet to port 25 works as well on both. The issue now is that since a few weeks , we get regular disconnections, and website hickups(timeouts), several per hour. If we set one router to a higher metric, that route no longer works. In short, I want the mails to route through NIC2 and the web through NIC1. Any better configuration (without installing a second mail server) ?

    Read the article

  • Unable to set initcwnd on a Hetzner server

    - by Sergi
    We just ordered a bunch of Hetzner EX40SSD servers with the minimal Debian install image that they provide and everything is just fine except that looking at tcpdumps for fine tuning the network from various locations the initcwnd param seems to be stuck at 6 no matter how we change it. By default Debian 3.2 kernels should have that setting to 10 so it's pretty strange. Is it possible that the NIC driver or a custom setting in the Hetzner Debian image is limiting this param? Even if we set it to 4, like the old kernel default, it doesn't work. Any ideas would be much appreciated! Does anyone know if the NIC drivers provided by default by Debian have some kind on limitation. In a long thread in http://www.webhostingtalk.com/showthread.php?t=1200617&highlight=hetzner they talk about a page http://wiki.hetzner.de/index.php/Installation_des_r8168-Treibers/en where Hetzner states that the included Realtek r8168 driver is not working properly, but nowhere do they say that the initcwnd could be affected. Tomorrow i will try to install a CentOs image and see if Debian is the problem...Last resort would be to install a custom debian image, but that is a pain in the ass! Thanks!

    Read the article

  • xen + debian network after upgrade squeeze to wheeze

    - by rush
    I've got a Debian + Xen server. After a system upgrade to the stable version the network doesn't come up after boot. Every time after reboot I need to bring it up manually. The network configuration was not changed during upgrade. Here is /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 11.22.33.44 netmask 255.255.255.0 gateway 11.22.33.1 nameserver 8.8.8.8 After boot ip r shows no route and eth0 has no ip address. Manually ip and route setup goes fine and network starts working. Messages from dmesg about network I've found (looks like nothing interesting) [ 3.894401] ACPI: Fan [FAN3] (off) [ 3.894444] ACPI: Fan [FAN4] (off) [ 4.178348] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:14:66:c9 [ 4.178351] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 4.178392] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF [ 4.178413] e1000e 0000:02:00.0: Disabling ASPM L0s L1 [ 4.178432] xen: registering gsi 16 triggering 0 polarity 1 -- [ 4.223667] ata5: DUMMY [ 4.223668] ata6: DUMMY [ 4.289153] e1000e 0000:02:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:1e:67:14:66:c8 [ 4.289155] e1000e 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection [ 4.289245] e1000e 0000:02:00.0: eth1: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 4.506908] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 4.542920] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) -- [ 10.362999] EXT4-fs (dm-23): mounted filesystem with ordered data mode. Opts: (null) [ 10.419103] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 10.988255] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 13.175533] Event-channel device installed. [ 13.287555] XENBUS: Unable to read cpu state -- [ 13.288670] XENBUS: Unable to read cpu state [ 13.965939] Bridge firewalling registered [ 14.134048] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 14.283862] ADDRCONF(NETDEV_UP): peth0: link is not ready [ 14.284543] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 17.800627] e1000e: peth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 17.801377] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready [ 18.307278] device peth0 entered promiscuous mode [ 24.538899] eth1: no IPv6 routers present [ 28.570902] peth0: no IPv6 routers present I've upgraded two servers and I've such behaviour on two of them. How to fix this and get network starts automatically on boot?

    Read the article

  • SSH agent forwarding on debian squeeze

    - by nfvindaloo
    Im trying to set up SSH forwarding like this osx debianA debianB I can connect to debianA fine, using ssh -A and it has the following env vars when i do: SSH_AGENT_PID=1543 SSH_AUTH_SOCK=/tmp/ssh-giwdYY1542/agent.1542 SSH_CLIENT='92.233.199.x 38954 22' SSH_CONNECTION='92.233.199.x 38954 108.171.179.x 22' SSH_TTY=/dev/pts/0 When i try to connect to debianB, the agent is not used! ssh -v output ends with: debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /home/nic/.ssh/id_rsa debug1: Trying private key: /home/nic/.ssh/id_dsa debug1: Next authentication method: password Then im asked for a password. I have not set any ForwardAgent no directives in ssh_config and dont have a .ssh/config at all. sshd_config has not got AllowAgentForwarding in it. I have tried all of these directives as yes also. debianA and debianB both have identical ssh_config and sshd_config (verified with diff) so the really weird thing is connecting OSX debianB debianA works fine!! Im totally out of ideas! Has anyone come across this before? Cheers! NFV

    Read the article

  • Windows-7 Ultimate 64 bit wont connect to my wired/wireless networks.

    - by A302
    Windows 7 Ultimate 64 bit. Everything was working fine & then just stopped working. The nic card Realtek PCIe GBE Family Controller is enabled but does not connect to my router (cables & router ports are good). Wireless Atheros AR5007EG is enabled but the connection is limited (encryption type / key have been verified). A laptop running XP can connect both wired / wireless. SSID is not being broadcast, connect to network if it is not broadcasting is checked. Have checked services.msc for Bonjour & did not see it listed. Network & sharing center does not list any active networks. Device manager lists both devices as functioning properly. Router configuration has not been changed. Virus scan has not found anything. I would like to fix this rather than using Acronis to do a system restore. Thanks in advance for any advice offered in solving this. 26 Jan, the nic card & wireless are working using PCLinux OS Live CD. It appears that the problem is Windows 7 related.

    Read the article

  • How to automatically start VM created by virt-manager?

    - by Jeff Shattock
    I have created a virtual machine with virt-manager that runs on kvm/qemu. The machine works well when started through virt-manager. However, I would like to be able to start and stop the VM through a script in init.d, so that it comes up and down along with the host. I need to have virt-manager show that the machine is running, and to be able to connect to its console through there. When I use the command line that is produced by running ps -eaf | grep kvm after starting the vm through virt-manager, I get some console messages about redirected character devices, but the machine does start and runs properly. However, I do not get any indication from virt-manager that it has started. How can I modify the command line to get virt-manager to pick up the running VM? Is there anything else about the command line that should change when starting outside of virt-manager? Command line is (slightly reformatted for readability): /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 512 -smp 1 -name BORON \ -uuid fa7e5fbd-7d8e-43c4-ebd9-1504a4383eb1 \ -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/BORON.monitor,server,nowait \ -monitor chardev:monitor -localtime -boot c \ -drive file=/dev/FS1/BORON,if=ide,index=0,boot=on,format=raw \ -net nic,macaddr=52:54:00:20:0b:fd,vlan=0,name=nic.0 \ -net tap,fd=41,vlan=0,name=tap.0 -chardev pty,id=serial0 -serial chardev:serial0 \ -parallel none -usb -usbdevice tablet -vnc 127.0.0.1:1 -k en-us -vga cirrus

    Read the article

  • securing communication between 2 Linux servers on local network for ports only they need access to

    - by gkdsp
    I have two Linux servers connected to each other via a cross-connect cable, forming a local network. One of the servers presents a DMZ for the other server (e.g. database server) that must be very secure. I'm restricting this question to communication between the two servers for ports that only need to be available to these servers (and no one else). Thus, communication between the two servers can be established by: (1) opening the required port(s) on both servers, and authenticating according to the applications' rules. (2) disabling IP Tables associated with the NIC cards the cross-connect cable is attached to (on both servers). Which method is more secure? In the first case, the needed ports are open to the external world, but protected by user name and password. In the second case, none of the needed ports are open to the outside world, but since the IP Tables are disabled for the NIC cards associated with the cross-connect cables, essentially all of the ports may be considered to be "open" between the two servers (and so if the server creating the DMZ is compromized, the hacker on the DMZ server could view all ports open using the cross-connect cable). Any conventional wisdom how to make the communication secure between two servers for ports only these servers need access to?

    Read the article

  • Windows-7 Ultimate 64 bit wont connect to my wired/wireless networks

    - by A302
    Windows 7 Ultimate 64 bit. Everything was working fine & then just stopped working. The nic card Realtek PCIe GBE Family Controller is enabled but does not connect to my router (cables & router ports are good). Wireless Atheros AR5007EG is enabled but the connection is limited (encryption type / key have been verified). A laptop running XP can connect both wired / wireless. SSID is not being broadcast, connect to network if it is not broadcasting is checked. Have checked services.msc for Bonjour & did not see it listed. Network & sharing center does not list any active networks. Device manager lists both devices as functioning properly. Router configuration has not been changed. Virus scan has not found anything. I would like to fix this rather than using Acronis to do a system restore. Thanks in advance for any advice offered in solving this. 26 Jan, the nic card & wireless are working using PCLinux OS Live CD. It appears that the problem is Windows 7 related.

    Read the article

  • vmware server 64 bit on ubuntu 9.10 64 bit with P2V windows 2003 SBS poor network speed

    - by RobertHC
    configuration is ubuntu 2.6.31-21 64 bit vmware 2.0.2 64 bit last release hardware is core 2 quad with 8GB ram guest is win 2003 server SBS 32 bit Dear friends, we have a converted physical to virtual windows sbs 2003, converted with last converter available nowadays http://www.vmware.com/products/converter/ vCenter converter. Running the P2V 2K3 SBS on vmware server, it does boot fine, but we do note an abnormal CPU activity and a poor lan speed. As attempts we did what follow. We removed all unneeded peripherals, we removed one NIC (phisycal server was 2 nics), we changed the vmx to ged the nic recognized as intel instead than amd, we removed 1 cpu (physical was 2 cpu), we removed anything was reported as failed driver from system events monitor. Nothing to do, no way and funny results. Let's read some tests results. All are made with the same file copied in different source folders. Copying from client side (both directions copy, to/from server) results are i.e. 10 seconds, copying the same files from server side (again from and to server) results are different... from client to server, speed is round about (bit more) 10 seconds, but from server to client direction is slower: double the time. Beeing very fast and launching a simultaneous copy "from server to client"+"from client to server", this made from the server side, results in a stuck traffic... 45 seconds to do the copy. vmware tools are installed and e1000 driver has been updated. With one processor CPU activity is still going up and down but much less than with two. Because of test, we installed win 2k8 STD 64 bit. We repeated all the above tests with exactly the same file result is just one: always 5 seconds (this matches the lan speed) Any idea about this issue is welcome and thank you if any. Kind regards R.

    Read the article

  • How to Transform a user's search string into a MS SQL Full-Text Search Phrase

    - by Atomiton
    I've search for answers for this and I can't seem to find an answer to what should be somewhat simple. This is related to another question I asked, but it's different. What's the best way to take a user's search phrase and throw it into a CONTAINSTABLE(table, column, @phrase, topN ) phrase? Say, for example the user inputs: Books by "Dr. Seuss" What's the best way to turn that into something that will return results in my ContainsTAble() phrase? I was previously parsing the search phrase and writing something like ISABOUT("Books" WEIGHT(1.0), "by" WEIGHT(0.9), "Dr. Seuss" WEIGHT(0.8)) as my @phrase but ISABOUT seems to be returning odd results... especially when one word searches are entered. Any Ideas?

    Read the article

  • display data from json file in datagrid

    - by kayn
    I want to display data from a json files in a data grid using dojo ver 1.0.0. I am able to diplay the data when i declare it on my code but when i store the same data in a json format so i can reference it in my script,i get an empty grid. This is my json file; { data: [ ['10''myfile','Css', 'CS Degree','Dr. Bottoman','This is mine'], ['10'myfile2','CS716', 'CS Degree','Prof Frank', 'This is course'], ['10'myfile3 ','CS714', 'CS Degree', 'Dr. Ree', 'Welcome'], ['14', 'myfile4','CS772', 'CS Degree', 'Mr. Boss', 'This will display content' ], ['18', 'myfile5','CS774', 'CS Degree','Ms. Kirk', 'This is networks.' ] ] } and below is my code; @import "../../../dojo/resources/dojo.css"; @import "../_grid/Grid.css"; body { font-size: 1.0em; } #grid { height: 400px; border: 1px solid silver; } .text-oneline { white-space: nowrap; overflow: hidden; text-overflow: ellipsis; } .text-scrolling { height: 4em; overflow: auto; } .text-scrolling { width: 21.5em; } dojo.require("dojox.grid.Grid"); dojo.require("dojox.grid._data.model"); dojo.require("dojo.parser"); <script type="text/javascript"> /*<span dojoType="dojo.data.ItemFileWriteStore" jsId="myStore" url="course.json"> </span>*/ data = [ ['10''myfile','Css', 'CS Degree','Dr. Bottoman','This is mine'], ['10'myfile2','CS716', 'CS Degree','Prof Frank', 'This is course'], ['10'myfile3 ','CS714', 'CS Degree', 'Dr. Ree', 'Welcome'], ['14', 'myfile4','CS772', 'CS Degree', 'Mr. Boss', 'This will display content' ], ['18', 'myfile5','CS774', 'CS Degree','Ms. Kirk', 'This is networks.' ] ]; getDetailData = function(inRowIndex) { var row = data[this.grid.dataRow % data.length ]; switch (this.index) { case 0: return row[5]; case 1: return row[2]; case 2: return row[0]; case 3: return row[1]; case 4: return row[3]; case 5: return row[4]; default: return row[this.index]; } } getName = function(inRowIndex) { var row = data[inRowIndex % data.length]; return row[1]; } // Main grid structure var gridCells = [ { type: 'dojox.GridRowView', width: '20px' }, { onBeforeRow: function(inDataIndex, inSubRows) { inSubRows[1].hidden = !detailRows[inDataIndex]; }, cells: [[ { name: 'Master', width: 3, get: getCheck, styles: 'text-align: center;' }, { name: 'Detail', get: getName, width: 60 }, ], [ { name: '', get: getDetail, colSpan: 2, styles: 'padding: 0; margin: 0;'} ]] } ]; // html for the +/- cell function getCheck(inRowIndex) { var image = (detailRows[inRowIndex] ? 'open.gif' : 'closed.gif'); var show = (detailRows[inRowIndex] ? 'false' : 'true') return ''; } // provide html for the Detail cell in the master grid function getDetail(inRowIndex) { var cell = this; // we can affect styles and content here, but we have to wait to access actual nodes setTimeout(function() { buildDetailgrid(inRowIndex, cell); }, 1); // look for a Detailgrid var Detailgrid = dijit.byId(makeDetailgridId(inRowIndex)); var h = (Detailgrid ? Detailgrid.cacheHeight : "120") + "px"; // insert a placeholder return ''; } // the Detail cell contains a Detailgrid which we set up below var DetailgridCells = [{ noscroll: true, cells: [ [ {name: "Brief Course Description",width: "auto"}, {name: "Course Code" }, {name: "Credits" }, {name: "Subject" }, {name: "Prerequisite" }, {name: "Lecturer"}], [] ]}]; var DetailgridProps = { structure: DetailgridCells, rowCount: 1, autoHeight: true, autoRender: false, "get": getDetailData }; // identify Detailgrids by their row indices function makeDetailgridId(inRowIndex) { return grid.widgetId + "Detailgrid"/+ inRowIndex/; } // if a Detailgrid exists at inRowIndex, detach it from the DOM function detachDetailgrid(inRowIndex) { var Detailgrid = dijit.byId(makeDetailgridId(inRowIndex)); if (Detailgrid) dojox.grid.removeNode(Detailgrid.domNode); } // render a Detailgrid into inCell at inRowIndex function buildDetailgrid(inRowIndex, inCell) { var n = inCell.getNode(inRowIndex).firstChild; var id = makeDetailgridId(inRowIndex); var Detailgrid = dijit.byId(id); if (Detailgrid) { n.appendChild(Detailgrid.domNode); } else { DetailgridProps.dataRow = inRowIndex; DetailgridProps.widgetId = id; Detailgrid = new dojox.VirtualGrid(DetailgridProps, n); } if (Detailgrid) { Detailgrid.render(); Detailgrid.cacheHeight = Detailgrid.domNode.offsetHeight; inCell.grid.rowHeightChanged(inRowIndex); } } // destroy Detailgrid at inRowIndex function destroyDetailgrid(inRowIndex) { var Detailgrid = dijit.byId(makeDetailgridId(inRowIndex)); if (Detailgrid) Detailgrid.destroy(); } // when user clicks the +/- detailRows = []; function toggleDetail(inIndex, inShow) { if (!inShow) detachDetailgrid(inIndex); detailRows[inIndex] = inShow; grid.updateRow(inIndex); } dojo.addOnLoad(function() { window["grid"] = dijit.byId("grid"); dojo.connect(grid, 'rowRemoved', destroyDetailgrid); }); Test grid

    Read the article

  • Dropdownlist and Datareader

    - by salvationishere
    After trying many solutions listed on the internet I am very confused now. I have a C#/SQL web application for which I am simply trying to bind an ExecuteReader command to a Dropdownlist so the user can select a value. This is a VS2008 project on an XP OS. How it works is after the user selects a table, I use this selection as an input parameter to a method from my Datamatch.aspx.cs file. Then this Datamatch.aspx.cs file calls a method from my ADONET.cs class file. Finally this method executes a SQL procedure to return the list of columns from that table. (These are all tables in Adventureworks DB). I know that this method returns successfully the list of columns if I execute this SP in SSMS. However, I'm not sure how to tell if it works in VS or not. This should be simple. How can I do this? Here is some of my code. The T-sQL stored proc: CREATE PROCEDURE [dbo].[getColumnNames] @TableName VarChar(50) AS BEGIN SET NOCOUNT ON; SELECT col.name 'COLUMN_NAME' FROM sysobjects obj INNER JOIN syscolumns col ON obj.id = col.id WHERE obj.name = @TableName END It gives me desired output when I execute following from SSMS: exec getColumnNames 'AddressType' And the code from Datamatch.aspx.cs file currently is: // Add DropDownList Control to Placeholder private void CreateDropDownLists() { SqlDataReader dr2 = ADONET_methods.DisplayTableColumns(targettable); int NumControls = targettable.Length; DropDownList ddl = new DropDownList(); } Where ADONET_methods.DisplayTableColumns(targettable) is: public static SqlDataReader DisplayTableColumns(string tt) { SqlDataReader dr = null; string TableName = tt; string connString = "Server=(local);Database=AdventureWorks;Integrated Security = SSPI"; string errorMsg; SqlConnection conn2 = new SqlConnection(connString); SqlCommand cmd = new SqlCommand("getColumnNames"); //conn2.CreateCommand(); try { cmd.CommandType = CommandType.StoredProcedure; cmd.Connection = conn2; SqlParameter parm = new SqlParameter("@TableName", SqlDbType.VarChar); parm.Value = "Person." + TableName.Trim(); parm.Direction = ParameterDirection.Input; cmd.Parameters.Add(parm); conn2.Open(); dr = cmd.ExecuteReader(); } catch (Exception ex) { errorMsg = ex.Message; } return dr; }

    Read the article

  • ColdFusion structs Direct Assignment vs object literal notation.

    - by Tom Hubbard
    The newer versions of ColdFusion (I believe CF 8 and 9) allow you to create structs with object literal notation similar to JSON. My question is, are there specific benefits (execution efficiency maybe) to using object literal notation over individual assignments for data that is essentially static? For example: With individual assignments you would do something like this: var user = {}; user.Fname = "MyFirstnam"; user.Lname = "MyLastName"; user.titles = []; ArrayAppend(user.titles,'Mr'); ArrayAppend(user.titles,'Dr.'); Whereas with object literals you would do something like. var user = {Fname = "MyFirstnam", Lname = "MyLastName", titles = ['Mr','Dr']}; Now this limited example is admittedly simple, but if titles was an array of structures (Say an array of addresses), the literal notation becomes awkward to work with.

    Read the article

  • Convert a user's search string into a MS SQL `Full-Text Query` Search Phrase

    - by Atomiton
    I've search for answers for this and I can't seem to find an answer to what should be somewhat simple. This is related to another question I asked, but it's different. What's the best way to take a user's search phrase and throw it into a CONTAINSTABLE(table, column, @phrase, topN ) phrase? Say, for example the user inputs: Books by "Dr. Seuss" What's the best way to turn that into something that will return results in my ContainsTAble() phrase? I was previously parsing the search phrase and writing something like ISABOUT("Books" WEIGHT(1.0), "by" WEIGHT(0.9), "Dr. Seuss" WEIGHT(0.8)) as my @phrase but ISABOUT seems to be returning odd results... especially when one word searches are entered. Any Ideas?

    Read the article

  • named_scope and substings

    - by Philb28
    I have a named_scope in rails that finds episodes by there directors given name named_scope :director_given, lambda { |dr| {:joins => :director, :conditions => ['given = ?', dr]} } It works great but I would like it to also work on substrings one the name. e.g. instead of having to search for 'Lucy' you could just search 'Lu'. P.S. I also have another named scope which does exactly the same thing but on the directors last name. It there a way to combine the two? Thanks,

    Read the article

  • datatable works in C# winform but not ASP.NET

    - by Charles Gargent
    Hi I have created a class that returns a datatable, when I use the class in a c# winform the dataGridView is populted corectly using the following code dataGridView1.DataSource = dbLib.GetData(); However when I try the same thing with ASP.NET I get a Object reference not set to an instance of an object. using the following code GridView1.DataSource = dbLib.GetData(); GridView1.DataBind(); What am I doing wrong / missing Thanks EDIT for the curios here is the dbLib class public static DataTable GetData() { SQLiteConnection cnn = new SQLiteConnection("Data Source=c:\\test.db"); SQLiteCommand cmd = new SQLiteCommand("SELECT count(Message) AS Occurances, Message FROM evtlog GROUP BY Message ORDER BY Occurances DESC LIMIT 25", cnn); cnn.Open(); SQLiteDataReader dr = cmd.ExecuteReader(CommandBehavior.CloseConnection); DataTable dt = new DataTable(); dt.Load(dr); return dt; }

    Read the article

  • cannot read multiple rows from sqldatareader

    - by amby
    Hi, when i query for only one record/row, sqldatareader is giving correct result but when i query for multiple rows, its giving error on the client side. below is my code. please tell me what is the problem here. string query = "select * from Customer_Order where orderNumber = " + order;//+" OR orderNumber = 17"; DataTable dt = new DataTable(); Hashtable sendData = new Hashtable(); try { using (SqlConnection conn = new SqlConnection(ConnectionString)) { using (SqlCommand cmd = new SqlCommand(query, conn)) { conn.Open(); SqlDataReader dr = cmd.ExecuteReader(CommandBehavior.CloseConnection); dt.Load(dr); } }

    Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >