Search Results

Search found 1251 results on 51 pages for 'fedora'.

Page 49/51 | < Previous Page | 45 46 47 48 49 50 51  | Next Page >

• Debugging IO limitation

  - by Martin F

  I have a Fedora box with some severe IO limitations which I have no idea how to debug. The server has a Areca Technology Corp. ARC-1130 12-Port PCI-X to SATA RAID Controller with 12 7200 RPM 1.5 TB disks and a Marvell Technology Group Ltd. 88E8050 PCI-E ASF Gigabit Ethernet Controller. uname -a output: 2.6.32.11-99.fc12.x86_64 #1 SMP Mon Apr 5 19:59:38 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux The server is a file server running Nginx with the stub status module enabled, so I can see the current amount of connections. The problem present itself when I have a high number of simultaneous connections in a writing state. Usually around 350, at this very moment it's at 590 and the server is almost unusable and stuck at 230mbit/s. If I run stop and hit 1 to see CPU core usages I have all 4 cores with around 99% io wait, if I run iotop the nginx workers are the only processes producing any read load, currently at around 25MB/s. I have each of the workers bound to their own core. Initially I figured it was just the disks being bugged. But I've run fscheck and smartmontools checks and found no errors. I also ran an iozone test which you can see the result of here: http://www.pastie.org/951667.txt?key=fimcvljulnuqy2dcdxa Additionally, when the amount of connections are low I have no problem getting a good speed. If I wget over the local network it easily hits 60MB/sec. Right now I just tried putting a file in /dev/shm, then I symlinked a file from the public dir to it and used wget over the local network and only got 50KB/s. Also, if I try to cp /dev/shm/test /root/test it quickly copies around 740MB and then slows down HEAVILY. Again with iotop reporting 99% iowait. I'm not really sure how to go about figuring out what the problems are. It could be a natural disk limitation but then the file from /dev/shm ought to transfer so it seems there's a network limit, but that's fine when there's not many connections. Perhaps it's a TCP stack problem but I really have no idea how to check that. Any suggestions on how to proceed with debugging would be very welcome. If additional information is required then let me know and I'll try to get it. Thanks.

  Read the article

• Configuring gmail for use on mailing lists

  - by reemrevnivek

  This is really two questions in one. First, are nettiquette guidelines still accurate in their restrictions on ASCII vs. HTML, posting style, and line length? (Here's a recent metafilter discussion of the topic.) Second, If they are not, should these guidelines be respected? If they are (or if they should still be respected), how can modern mail programs be configured to work properly with them? Most mailing list etiquette statements appear to have been written by sysadmins who loved their command lines, and refuse to change anything. Many still reference rfc1855, written in 1995. Just reading that paginated TXT should give you an idea of the climate at the time. Here's a short, fairly random list of mailing list etiquette statements with some extracted formatting guidelines: Mozilla - HTML discouraged, interleaved posting. FreeBSD - No HTML, don't top post, line length at 75 characters. Fedora - No HTML, bottom-post. You get the idea. You've all seen etiquette statements before. So, assuming that the rules should be obeyed (Usually a good idea), what can be done to allow me to still use a modern mail program, and exchange mail with friends who use the same programs? We like to format our mail. Bold headings, code snippets (sometimes syntax highlighted, if the copy-paste pulls RTF text as from XCOde and Eclipse), free line breaks determined by your browser width, and the (very) occasional image make the message easier to read. Threaded conversations are a wonderful thing. Broadband connections are, I'm sure, the rule for most of the users of SU and of developer mailing lists, disk space is cheap, and so the overhead of HTML is laughable. However, I don't want to post a question to a mailing list and have the guru who can answer my question automatically delete it, or come off as uncaring. Until I hear otherwise, I'll continue to respect the rules as best I can. For a common example of the problem, Gmail, by default, sends HTML formatted messages with bottom-posted quotes (which are folded in, just read the last message immediately above), and uses the frame width to wrap lines, rather than a character count. ASCII can be selected, and quotes can be moved and reversed, but line wraps of quotes don't work, line breaks are tedious to add (and more tedious to read, if they're super small in comparison to the width of the frame). Is there a forwarding, free mail program which can help with this exercise? Should an "RFC1855 mode" lab be written? Or do I have to go to the command line for my mailing lists, and gmail for my other mail?

  Read the article

• File/folder permissions and groups on Linux with Apache

  - by phobia

  I'm trying to learn about permissions on linux webserver with apache. Some clues to the system: The server I have to play around with is Fedora based. Apache runs as apache:apache. To allow for e.g. php to write to a file the file needs to be chmod 777. 755 is not sufficiant. What I'm wondering is basically how set up permissions like they should be on e.g. a "shared web host". My main problem is that if I set a permission so that one user cannot access anothers home folder, then apache can't read from the public_html folder either. To keep the users out I need to set chmod 700. But to let apache to read I need to have at least execute on world, so a 701 basically works, but won't let some users in. So I'm really stuck on what to do. Have been concidering adding the apache user to the frous grours below to avoid having to add the world execute flag, but is that a bad thing? Should it be the other way around, the users in the groups below should also be in the apache group? I was aiming at having 4 groups: 1. webapp same as dev_int, but is the only one that can go inside the webapp/live folder to e.g. do an update from the repo. 2. dev_int can read,write and execute everything in the "web root", including the two below, but nothing outside of the web root 3. dev_ext can read write and execute in all client folders, but cannot access anything outside of the webapp root 4. clientsBasic ftp accounts. Has a home folder with a public_html, but cannot access any other home folders An example of folder structure: webroot    no users in the aforementioned groups can go outside of here some_project    :dev_int only webapp live    :webapp only staging    :dev_int and :dev_ext clients    :dev_int and :dev_ext client_1    :dev_int, :dev_ext and client1:clients public_html dev developer_1    developer_1:dev_int OR :dev_ext public_html

  Read the article

• Repair BAD Sectors or Buy a new HDD?

  - by Nehal J. Wani

  I have a Seagate internal hard disk drive. I recently opened up my laptop [Dell Inspiron N5010] [Warranty has expired], cleaned it and it worked normally after waking up from hibernation. However, when I restarted it, it stuck on windows loading screen, then tried to boot from Dell recovery partition but failed. It gave the error: Windows has encounter a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer If you continue to receive this error message, contact the hardware manufacturer. Status: 0xc00000e9 Info: An unexpected I/O error has occurred. While cleaning, I had mistakenly touched the round silvery thing at the bottom of the HDD. I don't know whether this has caused the problem or not. Since I have Fedora also installed in the same HDD, I can boot from it but it shows weird read errors when I ask it to mount Windows partitions. The disk utility also says that the Hard Disk has many bad sectors and needs to be replaced. I downloaded Seatools from Seagate website and used it. In the long test, I gave it permission to repair the first 100 errors which it did successfully. Now I am confused at what I should do. Internal Hard Disk Costs: a. Internal HDD 500GB Costs: Rs3518 b.1 External HDD 500GB Costs: Rs3472 b.2 External HDD 1TB Costs: Rs5500 c. Internal to External Converter Costs: Rs650 I have the following options: (i) Buy an External HDD, backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to buy another internal HDD and replace the damaged one. OR break the seal of the external one and put it inside my laptop as internal. Breaking the case involves risks. (ii) Buy a Internal HDD and an Internal to External Converter Case [Not very reliable], backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to just put in the new internal HDD I just bought. Experts, please guide me as to what will be the most VFM option? Also, if a HDD is failing, is it that I shouldn't read from it too otherwise there is a chance of other sectors failing? What I mean is, is it wrong to read from the HDD without taking backup first?

  Read the article

• SIGINT and SIGTSTP ignored by most common applications

  - by Vašek Potocek

  After the last upgrade to my Fedora, a strange behaviour started occurring in X terminal applications. I can't seem to stop any process using Ctrl+C, it just results in printing ^C to the console. Similarly, Ctrl+Z prints ^Z and the process goes on. Both work well in non-graphical virtual consoles. I checked stty -a and it seems perfectly normal: speed 38400 baud; rows 24; columns 80; line = 0; intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = M-^?; eol2 = M-^?; swtch = M-^?; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0; -parenb -parodd cs8 hupcl -cstopb cread -clocal -crtscts -ignbrk brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc ixany imaxbel iutf8 opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke This is independent of the terminal (gnome-terminal, XFCE4 terminal, xterm). I later noticed that it may not be caused by the terminal at all: INT or TSTP sent directly to the respective process are ignored, too. This comprises various applications I used to terminate using Ctrl+C on a regular basis (and which often don't have any better means of exiting): cat, find, tail -f, java, ping, mplayer when stuck on a broken file... Even bash ignores Ctrl+C when I want to break a command line I have been entering and then changed my mind (no ^C is printed in this case). I need to delete it character by character (of which there may be hundreds if filename completion has been used) or intentionally run the unwanted command. Strangely enough, vim does recognize Ctrl+C—just to say its "use :quit", of course. This is extremely annoying and prevents me from working efficiently. Everything had been working until lately, maybe a week ago or so. I can not find any possible causes in Google, perhaps I'm trying wrong search terms or misidentifying the main problem. What could be it and how could I revert the standard behaviour, please? Update Ctrl+Z works sometimes. It seems that in the very first terminal I launch after logging in it stops the running command but stops working after that.

  Read the article

• ERROR: Linux route add command failed: external program exited with error status: 4

  - by JohnMerlino

  A remote machine running fedora uses openvpn, and multiple developers were successfully able to connect to it via their client openvpn. However, I am running Ubuntu 12.04 and I am having trouble connecting to the server via vpn. I copied ca.crt, home.key, and home.crt from the server to my local machine to /etc/openvpn folder. My client.conf file looks like this: ############################################## # Sample client-side OpenVPN 2.0 config file # # for connecting to multi-client server. # # # # This configuration can be used by multiple # # clients, however each client should have # # its own cert and key files. # # # # On Windows, you might want to rename this # # file so it has a .ovpn extension # ############################################## # Specify that we are a client and that we # will be pulling certain config file directives # from the server. client # Use the same setting as you are using on # the server. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel # if you have more than one. On XP SP2, # you may need to disable the firewall # for the TAP adapter. ;dev-node MyTap # Are we connecting to a TCP or # UDP server? Use the same setting as # on the server. ;proto tcp proto udp # The hostname/IP and port of the server. # You can have multiple remote entries # to load balance between the servers. remote xx.xxx.xx.130 1194 ;remote my-server-2 1194 # Choose a random host from the remote # list for load-balancing. Otherwise # try hosts in the order specified. ;remote-random # Keep trying indefinitely to resolve the # host name of the OpenVPN server. Very useful # on machines which are not permanently connected # to the internet such as laptops. resolv-retry infinite # Most clients don't need to bind to # a specific local port number. nobind # Downgrade privileges after initialization (non-Windows only) ;user nobody ;group nogroup # Try to preserve some state across restarts. persist-key persist-tun # If you are connecting through an # HTTP proxy to reach the actual OpenVPN # server, put the proxy server/IP and # port number here. See the man page # if your proxy server requires # authentication. ;http-proxy-retry # retry on connection failures ;http-proxy [proxy server] [proxy port #] # Wireless networks often produce a lot # of duplicate packets. Set this flag # to silence duplicate packet warnings. ;mute-replay-warnings # SSL/TLS parms. # See the server config file for more # description. It's best to use # a separate .crt/.key file pair # for each client. A single ca # file can be used for all clients. ca ca.crt cert home.crt key home.key # Verify server certificate by checking # that the certicate has the nsCertType # field set to "server". This is an # important precaution to protect against # a potential attack discussed here: # http://openvpn.net/howto.html#mitm # # To use this feature, you will need to generate # your server certificates with the nsCertType # field set to "server". The build-key-server # script in the easy-rsa folder will do this. ns-cert-type server # If a tls-auth key is used on the server # then every client must also have the key. ;tls-auth ta.key 1 # Select a cryptographic cipher. # If the cipher option is used on the server # then you must also specify it here. ;cipher x # Enable compression on the VPN link. # Don't enable this unless it is also # enabled in the server config file. comp-lzo # Set log file verbosity. verb 3 # Silence repeating messages ;mute 20 But when I start server and look in /var/log/syslog, I notice the following error: May 27 22:13:51 myuser ovpn-client[5626]: /sbin/route add -net 10.27.12.1 netmask 255.255.255.252 gw 10.27.12.37 May 27 22:13:51 myuser ovpn-client[5626]: ERROR: Linux route add command failed: external program exited with error status: 4 May 27 22:13:51 myuser ovpn-client[5626]: /sbin/route add -net 172.27.12.0 netmask 255.255.255.0 gw 10.27.12.37 May 27 22:13:51 myuser ovpn-client[5626]: /sbin/route add -net 10.27.12.1 netmask 255.255.255.255 gw 10.27.12.37 And I am unable to connect to the server via openvpn: $ ssh [email protected] ssh: connect to host xxx.xx.xx.130 port 22: No route to host What may I be doing wrong?

  Read the article

• Linux-Containers — Part 1: Overview

  - by Lenz Grimmer

  "Containers" by Jean-Pierre Martineau (CC BY-NC-SA 2.0). Linux Containers (LXC) provide a means to isolate individual services or applications as well as of a complete Linux operating system from other services running on the same host. To accomplish this, each container gets its own directory structure, network devices, IP addresses and process table. The processes running in other containers or the host system are not visible from inside a container. Additionally, Linux Containers allow for fine granular control of resources like RAM, CPU or disk I/O. Generally speaking, Linux Containers use a completely different approach than "classicial" virtualization technologies like KVM or Xen (on which Oracle VM Server for x86 is based on). An application running inside a container will be executed directly on the operating system kernel of the host system, shielded from all other running processes in a sandbox-like environment. This allows a very direct and fair distribution of CPU and I/O-resources. Linux containers can offer the best possible performance and several possibilities for managing and sharing the resources available. Similar to Containers (or Zones) on Oracle Solaris or FreeBSD jails, the same kernel version runs on the host as well as in the containers; it is not possible to run different Linux kernel versions or other operating systems like Microsoft Windows or Oracle Solaris for x86 inside a container. However, it is possible to run different Linux distribution versions (e.g. Fedora Linux in a container on top of an Oracle Linux host), provided it supports the version of the Linux kernel that runs on the host. This approach has one caveat, though - if any of the containers causes a kernel crash, it will bring down all other containers (and the host system) as well. For example, Oracle's Unbreakable Enterprise Kernel Release 2 (2.6.39) is supported for both Oracle Linux 5 and 6. This makes it possible to run Oracle Linux 5 and 6 container instances on top of an Oracle Linux 6 system. Since Linux Containers are fully implemented on the OS level (the Linux kernel), they can be easily combined with other virtualization technologies. It's certainly possible to set up Linux containers within a virtualized Linux instance that runs inside Oracle VM Server for Oracle VM Virtualbox. Some use cases for Linux Containers include: Consolidation of multiple separate Linux systems on one server: instances of Linux systems that are not performance-critical or only see sporadic use (e.g. a fax or print server or intranet services) do not necessarily need a dedicated server for their operations. These can easily be consolidated to run inside containers on a single server, to preserve energy and rack space. Running multiple instances of an application in parallel, e.g. for different users or customers. Each user receives his "own" application instance, with a defined level of service/performance. This prevents that one user's application could hog the entire system and ensures, that each user only has access to his own data set. It also helps to save main memory — if multiple instances of a same process are running, the Linux kernel can share memory pages that are identical and unchanged across all application instances. This also applies to shared libraries that applications may use, they are generally held in memory once and mapped to multiple processes. Quickly creating sandbox environments for development and testing purposes: containers that have been created and configured once can be archived as templates and can be duplicated (cloned) instantly on demand. After finishing the activity, the clone can safely be discarded. This allows to provide repeatable software builds and test environments, because the system will always be reset to its initial state for each run. Linux Containers also boot significantly faster than "classic" virtual machines, which can save a lot of time when running frequent build or test runs on applications. Safe execution of an individual application: if an application running inside a container has been compromised because of a security vulnerability, the host system and other containers remain unaffected. The potential damage can be minimized, analyzed and resolved directly from the host system. Note: Linux Containers on Oracle Linux 6 with the Unbreakable Enterprise Kernel Release 2 (2.6.39) are still marked as Technology Preview - their use is only recommended for testing and evaluation purposes. The Open-Source project "Linux Containers" (LXC) is driving the development of the technology behind this, which is based on the "Control Groups" (CGroups) and "Name Spaces" functionality of the Linux kernel. Oracle is actively involved in the Linux Containers development and contributes patches to the upstream LXC code base. Control Groups provide means to manage and monitor the allocation of resources for individual processes or process groups. Among other things, you can restrict the maximum amount of memory, CPU cycles as well as the disk and network throughput (in MB/s or IOP/s) that are available for an application. Name Spaces help to isolate process groups from each other, e.g. the visibility of other running processes or the exclusive access to a network device. It's also possible to restrict a process group's access and visibility of the entire file system hierarchy (similar to a classic "chroot" environment). CGroups and Name Spaces provide the foundation on which Linux containers are based on, but they can actually be used independently as well. A more detailed description of how Linux Containers can be created and managed on Oracle Linux will be explained in the second part of this article. Additional links related to Linux Containers: OTN Article: The Role of Oracle Solaris Zones and Linux Containers in a Virtualization Strategy Linux Containers on Wikipedia - Lenz Grimmer Follow me on: Personal Blog | Facebook | Twitter | Linux Blog |

  Read the article

• 2010 Collaboration Summit Impressions

  - by Elena Zannoni

  It's a bit late, but there you have it anyway. April 14 to 16 I attended the Linux Foundation Collaboration Summit in SFO. I was running two tracks, one on tracing and one on tools. You can see the tracks and the slides here: http://events.linuxfoundation.org/events/collaboration-summit/slides I was pretty busy both days, Thursday with a whole day tracing track, Friday with a half day toolchain track. The sessions were well attended, the rooms were full, with people spilling in the hallways. Some new things were presented, like Kernelshark, by Steve Rostedt, a GUI (yes, believe it or not, a GUI) written in GTK. It is very nice, showing a timeline for traced kernel events, and you can zoom in and filter at will. It works on the latest kernels, and it requires some new things/fixes in GTK. I don't recall exactly what version of GTK though. Dominique Toupin from Ericsson presented something about user requirements for tracing. Mostly though about who's who in the embedded world, and eclipse. Masami and Mathieu presented an update on their work. See their slides. The interesting thing to me was of course the new version of uprobes w/o underlying utrace presented by Jim Keniston. At the end of the session we had a discussion about the future of utrace. Roland wasn't there, butTom Tromey (also from RedHat) collected the feedback. Basically we are at a standstill now that utrace has been rejected yet again. There wasn't much advise that anybody could give, except jokingly, we decided that the only way in is to make it a part of perf events. There needs to be another refactoring, but most of all, this "killer app" that would be enabled because of utrace hasn't materialized yet. We think that having a good debugging story on Linux is enough of a killer app, for instance allowing multiple tracers, and not relying on SIGCHLD etc. I think this wasn't completely clear to the kernel community. Trying to achieve debugging via a gdb stub inside the kernel interfacing to utrace and that is controlled via the gdb remote protocol also lost its appeal (thankfully, since the gdb remote protocol is archaic). Somebody would have to be creative in how to submit utrace. It doesn't have to be called utrace (it was really a random choice, for lack of a letter that was not already used in front of the word "trace"). So basically, I think the ideas behind utrace are sound, and the necessity of a new interface is acknowledged. But I believe the integration/submission process with the kernel folks has to restart from scratch, clean slate. We'll see. There are many conferences and meetings coming up in the near future where things can be discussed further. On the second day, Friday, we had the tools talks. It was interesting to observe the more "kernel" oriented people's behavior towards the gcc etc community. The first talk was by Mark Mitchell, about Gcc and its new plugin architecture. After that, Paolo talked about the new C++1x standard, which will be finalized in 2011. Many features are already implemented in the libstdc++ library and gcc and usable today. We had a few minutes (really, the half day track was quite short) where Bradley Kuhn from the Software Freedom Law Center explained the GPLv3 exception for gcc (due to the new gcc plugin architecture and the availability of the intermediate results from the compilation, which is a new thing). I will not try to explain, but basically you cannot take the result of the preprocessing and then use that in your own proprietary compiler. After, we had a talk by Ian Taylor about the new Gold linker. One good thing in that area is that they are trying to make gold the new default linker (for instance Fedora will use gold as the distro linker). However gold is very different from binutils' old linker. It doesn't use a linker script, for instance. The kernel has been linked with gold many times as an exercise (the ground work was done by Kris Van Hees), but this needs to be constantly tested/monitored because the kernel linker script is very complex, and uses esoteric features (Wenji is now monitoring that each kernel RC can be built with gold). It was positive that people are now aware of gold and the need for it to be ported to more architectures. It seems that the porting is very easy, with little arch dependent code. Finally Tom Tromey presented about gdb and the archer project. Archer is a development branch of gdb mostly done by RedHat, where they are focusing on better c++ printing, c++ expression parsing, and plugins. The archer work is merged regularly in the gdb mainline. In general it was a good conference. I did miss most of the first day, because that's when I flew in. But I caught a couple of talks. Nothing earth shattering, except for Google giving each person registered a free Android phone. Yey.

  Read the article

• How to install iodbc in Ubuntu 12.10

  - by Hanynowsky

  I need to install the library iodbc (depends on libodbc2) in my Quantal machine. Yet there is creepy dependency problem. This was replaced somehow by unixodbc which I don't have, installed. Here is what I get when I try to install : sudo apt-get install libiodbc2-dev Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libiodbc2-dev : Depends: libiodbc2 (= 3.52.7-2build2) but it is not going to be installed Depends: iodbc (= 3.52.7-2build2) but it is not going to be installed E: Unable to correct problems, you have held broken packages. I can tell that iodbc conflicts with odbcinst. Yet, I cannot remove it due to the following: sudo apt-get remove odbcinst Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: akonadi-backend-mysql calligra-l10n-engb kde-l10n-engb kdevelop-l10n kdevelop-php-docs-l10n kdevelop-php-l10n libakonadi-kabc4 libakonadi-notes4 libakonadiprotocolinternals1 libboost-thread1.49.0 libdmtx0a libgpgme++2 libkcalcore4 libkdgantt2 libkholidays4 libkimap4 libkldap4 libkmbox4 libkmime4 libkolabxml0 libkpgp4 libkresources4 libksieve4 libprison0 libqgpgme1 libqrencode3 libxerces-c3.1 Use 'apt-get autoremove' to remove them. The following packages will be REMOVED: akonadi-server k3b k3b-i18n katepart kde-runtime kdelibs-bin kdelibs5-plugins kdepim-runtime kdepim-strigi-plugins kdepimlibs-kio-plugins kdoctools kget kmag kmail kmix kmousetool ksystemlog kubuntu-debug-installer language-pack-kde-ar language-pack-kde-en libakonadi-calendar4 libakonadi-contact4 libakonadi-kcal4 libakonadi-kde4 libakonadi-kmime4 libcalendarsupport4 libincidenceeditorsng4 libk3b6 libkabc4 libkactivities-bin libkactivities6 libkalarmcal2 libkatepartinterfaces4 libkcal4 libkcalutils4 libkcddb4 libkde3support4 libkdepim4 libkdepimdbusinterfaces4 libkdewebkit5 libkemoticons4 libkfile4 libkgapi0 libkhtml5 libkio5 libkleo4 libkmanagesieve4 libkmediaplayer4 libknewstuff3-4 libknotifyconfig4 libkolab0 libkonq-common libkonq5abi1 libkontactinterface4 libkparts4 libkpimidentities4 libkpimtextedit4 libkpimutils4 libkprintutils4 libksieveui4 libktexteditor4 libktnef4 libktorrent4 libkworkspace4abi2 libkxmlrpcclient4 libmailcommon4 libmailimporter4 libmailtransport4 libmessagecomposer4 libmessagecore4 libmessagelist4 libmessageviewer4 libmicroblog4 libnepomuk4 libnepomukcore4abi1 libnepomukquery4a libnepomuksync4 libnepomukutils4 libplasma3 libsoprano4 libtemplateparser4 libvirtodbc0 nepomuk-core odbcinst odbcinst1debian2 plasma-scriptengine-javascript qapt-batch soprano-daemon virtuoso-minimal 0 upgraded, 0 newly installed, 89 to remove and 0 not upgraded. After this operation, 126 MB disk space will be freed. Do you want to continue [Y/n]? Other info: Why do the "iodbc" and "libmyodbc" packages conflict with each other? The root problem is that I need to use a new feature introduced in the latest MySQL Workbench builds (DB Migration) which uses odbc for that matter. Here is what Mysql doc says about it : Linux The Migration Wizard uses iODBC as a driver manager for all of its ODBC connections in Linux. This may give you some troubles because most Linux distributions provide ODBC drivers compiled against unixODBC. This is another driver manager not supported by MySQL Workbench so you won’t be able to use those drivers unless you compile them against iODBC. Here’s what you should do. Make sure that you have iODBC installed. If you are using Debian, Ubuntu or another Debian based distro, type this command in your terminal: $ sudo apt-get install iodbc libiodbc2-dev libpq-dev libssl-dev For RPM based distros (RedHat, Fedora, etc.) type this command instead of the previous one: $ sudo yum install iodbc iodbc-dev libpqxx-devel openssl-devel Now we need to install the PostgreSQL ODBC drivers. Download the psqlODBC source tarball from here. Use the latest version available for download. As of this writing the latest version corresponds to the file psqlodbc-09.01.0200.tar.gz. Extract this tarball to a directory in your hard drive and open a terminal and cd into that directory. Type this in the terminal window: $ ./configure --with-iodbc --enable-pthreads $ make $ sudo make install Verify that you have the file psqlodbcw.so in the /usr/local/lib directory. This package seems to pose the problem probably: dpkg -s odbcinst1debian2 Package: odbcinst1debian2 Status: install ok installed Priority: optional Section: libs Installed-Size: 241 Maintainer: Ubuntu Developers <[email protected]> Architecture: amd64 Multi-Arch: same Source: unixodbc Version: 2.2.14p2-5ubuntu4 Replaces: unixodbc (<< 2.1.1-2) Depends: libc6 (>= 2.14), libltdl7 (>= 2.4.2), odbcinst Pre-Depends: multiarch-support Breaks: libiodbc2, libmyodbc (<< 5.1.6-2), odbc-postgresql (<< 1:09.00.0310-1.1), tdsodbc (<< 0.82-8) Conflicts: odbcinst1, odbcinst1debian1 Description: Support library for accessing odbc ini files This package contains the libodbcinst library from unixodbc, a library used by ODBC drivers for reading their configuration settings from /etc/odbc.ini and ~/.odbc.ini. . Also contained in this package are the driver setup plugins, which describe the features supported by individual ODBC drivers. Homepage: http://www.unixodbc.org/ Original-Maintainer: Steve Langasek <[email protected]> I have no broken packages:

  Read the article

• My own personal use of Oracle Linux

  - by wcoekaer

  It always is easier to explain something with examples... Many people still don't seem to understand some of the convenient things around using Oracle Linux and since I personally (surprise!) use it at home, let me give you an idea. I have quite a few servers at home and I also have 2 hosted servers with a hosted provider. The servers at home I use mostly to play with random Linux related things, or with Oracle VM or just try out various new Oracle products to learn more. I like the technology, it's like a hobby really. To be able to have a good installation experience and use an officially certified Linux distribution and not waste time trying to find the right libraries, I, of course, use Oracle Linux. Now, at least I can get a copy of Oracle Linux for free (even if I was not working for Oracle) and I can/could use that on as many servers at home (or at my company if I worked elsewhere) for testing, development and production. I just go to http://edelivery.oracle.com/linux and download the version(s) I want and off I go. Now, I also have the right (and not because I am an employee) to take those images and put them on my own server and give them to someone else, I in fact, just recently set up my own mirror on my own hosted server. I don't have to remove oracle-logos, I don't have to rebuild the ISO images, I don't have to recompile anything, I can just put the whole binary distribution on my own server without contract. Perfectly free to do so. Of course the source code of all of this is there, I have a copy of the UEK code at home, just cloned from https://oss.oracle.com/git/?p=linux-2.6-unbreakable.git. And as you can see, the entire changelog, checkins, merges from Linus's tree, complete overview of everything that got changed from kernel to kernel, from patch to patch, errata to errata. No obfuscating, no tar balls and spending time with diff, or go read bug reports to find out what changed (seems silly to me). Some of my servers are on the external network and I need to be current with security errata, but guess what, no problem, my servers are hooked up to http://public-yum.oracle.com which is open, free, and completely up to date, in a consistent, reliable way with any errata, security or bugfix. So I have nothing to worry about. Also, not because I am an employee. Anyone can. And, with this, I also can, and have, set up my own mirror site that hosts these RPMs. both binary and source rpms. Because I am free to get them and distribute them. I am quite capable of supporting my servers on my own, so I don't need to rely on the support organization so I don't need to have a support subscription :-). So I don't need to pay. Neither would you, at least not with Oracle Linux. Another cool thing. The hosted servers came (unfortunately) with Centos installed. While Centos works just fine as is, I tend to prefer to be current with my security errata(reliably) and I prefer to just maintain one yum repository instead of 2, I converted them over to Oracle Linux as well (in place) so they happily receive and use the exact same RPMs. Since Oracle Linux is exactly the same from a user/application point of view as RHEL, including files like /etc/redhat-release and no changes from .el. to .centos. I know I have nothing to worry about installing one of the RHEL applications. So, OL everywhere makes my life a lot easier and why not... Next! Since I run Oracle VM and I have -tons- of VM's on my machines, in some cases on my big WOPR box I have 15-20 VMs running. Well, no problem, OL is free and I don't have to worry about counting the number of VMs, whether it's 1, or 4, or more than 10 ... like some other alternatives started doing... and finally :) I like to try out new stuff, not 3 year old stuff. So with UEK2 as part of OL6 (and 6.3 in particular) I can play with a 3.0.x based kernel and it just installs and runs perfectly clean with OL6, so quite current stuff in an environment that I know works, no need to toy around with an unsupported pre-alpha upstream distribution with libraries and versions that are not compatible with production software (I have nothing against ubuntu or fedora or opensuse... just not what I can rely on or use for what I need, and I don't need a desktop). pretty compelling. I say... and again, it doesn't matter that I work for Oracle, if I was working elsewhere, or not at all, all of the above would still apply. Student, teacher, developer, whatever. contrast this with $349 for 2 sockets and oneguest and selfsupport per year to even just get the software bits.

  Read the article

• Failed to obtain JDBC Driver for MySQL under Tomcat environment

  - by Michael Mao

  Hi all: I've been trying to obtain the Driver class for JDBC connection to MySQL. The workstation is running on Linux, Fedora 10. I have manually set up the classpath variable for Java by CLI like this: bash-3.2$ echo $CLASSPATH /home/cmao/public_html/jsp/mysql-connector-java-5.1.12-bin.jar This shows that I've added the lastest mysql connection jar archive to my CLASSPATH variable. I've created a test JSP page which can be found here And source code for this page is: <%@page language="java"%> <%@page import="java.sql.*"%> <%@page import="java.util.*"%> <html> <head> <title>UTS JDBC MySQL connection test page</title> </head> <body> <% Connection con = null; out.print("Java version is : " + System.getProperty("java.version") + "<br />"); out.print("Tomcat version is : " + application.getServerInfo() + "<br />"); out.print("Servlet version is: " + application.getMajorVersion() + "<br />"); out.print("JSP version is : " + JspFactory.getDefaultFactory().getEngineInfo().getSpecificationVersion() +"<br />"); //out.print("Java classpath is : " + System.getProperty("java.class.path")+ "<br />"); //out.print("JSP classpath is : " + appliaction.getAttribute("org.apache.catalina.jsp_classpath") + "<br />"); //out.print("Tomcat classpath is : " + System.getProperty("org.apache.tomcat.common.classpath") + "<br />"); try { Class c = Class.forName("com.mysql.jdbc.Driver"); } catch(Exception e) { out.println("Error! Failed to obtain JDBC driver for MySQL... Missing class \"com.mysql.jdbc.Driver\"<br />"); } %> </body> </html> None of those commented out line would work, various Jsper Expetions would be thrown. You can check those Error pages from the following links: classpath Error page catalina Error page tomcat Error page It seems, from my limited knowledge of JSP and Servlet, the Tomcat environment "ignores" my Java CLASSPATH? In which case I cannot configure the MySQL JDBC package to let my Servlets(a JSP is but a Servlet anyway) work. I am not sure how to fix this issue. would it be better if I use an IDE like Eclipse or NetBeans and create a real Java "web app" so that everything can be "self-configured" by the usage of a web.config XML configuration file? So that I can certainly bypass this Tomcat environment restriction? Many thanks for the suggestions in advance.

  Read the article

• Ajax gets nothing back from the php.

  - by ShaMun

  Jquery i dont have alert and firefox i dont have anything in return. The code was working before, database query have successfull records also. What i am missing??? Jquery ajax. $.ajax({ type : "POST", url : "include/add_edit_del.php?model=teksten_display", data : "oper=search&ids=" + _id , dataType: "json", success : function(msg){ alert(msg); } }); PHP case 'teksten_display': $id = $_REQUEST['ids']; $res = $_dclass-_query_sql( "select a,b,id,wat,c,d from tb1 where id='" . $id . "'" ); $_rows = array(); while ( $rows = mysql_fetch_array ($res) ) { $_rows = $rows; } //header('Cache-Control: no-cache, must-revalidate'); //header('Expires: Mon, 26 Jul 1997 05:00:00 GMT'); header('Content-type: application/json'); echo utf8_encode( json_encode($_rows) ) ; //echo json_encode($_rows); //var_dump($_rows); //print_r ($res); break; Firefox response/request header Date Sat, 24 Apr 2010 22:34:55 GMT Server Apache/2.2.3 (CentOS) X-Powered-By PHP/5.1.6 Expires Thu, 19 Nov 1981 08:52:00 GMT Cache-Control no-store, no-cache, must-revalidate, post-check=0, pre-check=0 Pragma no-cache Content-Length 0 Connection close Content-Type application/json Host www.xxxx.be User-Agent Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.9) Gecko/20100330 Fedora/3.5.9-2.fc12 Firefox/3.5.9 Accept application/json, text/javascript, */* Accept-Language en-us,en;q=0.5 Accept-Encoding gzip,deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 300 Connection keep-alive Content-Type application/x-www-form-urlencoded; charset=UTF-8 X-Requested-With XMLHttpRequest Referer http://www.xxxx.be/xxxxx Content-Length 17 Cookie csdb=2; codb=5; csdbb=1; codca=1.4; csdca=3; PHPSESSID=benunvkpecqh3pmd8oep5b55t7; CAKEPHP=3t7hrlc89emvg1hfsc45gs2bl2

  Read the article

• apache eat up too many ram per child

  - by mrc4r7m4n

  Hello to everyone. I've got fallowing problem: Apache eat to many ram per child. The fallowing comments shows: cat /etc/redhat-release -- Fedora release 8 (Werewolf) free -m: total used free shared buffers cached Mem: 3566 3136 429 0 339 1907 -/+ buffers/cache: 889 2676 Swap: 4322 0 4322 I know that you will say that there is nothing to worry about because swap is not use, but i think it's not use for now. 3.httpd -v: Server version: Apache/2.2.14 (Unix) 4.httpd -l: Compiled in modules: core.c mod_authn_file.c mod_authn_default.c mod_authz_host.c mod_authz_groupfile.c mod_authz_user.c mod_authz_default.c mod_auth_basic.c mod_include.c mod_filter.c mod_log_config.c mod_env.c mod_setenvif.c mod_version.c mod_ssl.c prefork.c http_core.c mod_mime.c mod_status.c mod_autoindex.c mod_asis.c mod_cgi.c mod_negotiation.c mod_dir.c mod_actions.c mod_userdir.c mod_alias.c mod_rewrite.c mod_so.c 5.List of loaded dynamic modules: LoadModule authz_host_module modules/mod_authz_host.so LoadModule include_module modules/mod_include.so LoadModule log_config_module modules/mod_log_config.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule mime_module modules/mod_mime.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule alias_module modules/mod_alias.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule proxy_module modules/mod_proxy.so LoadModule cgi_module modules/mod_cgi.so 6.My prefrok directive <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 25 ServerLimit 80 MaxClients 80 MaxRequestsPerChild 4000 </IfModule> KeepAliveTimeout 6 MaxKeepAliveRequests 100 KeepAlive On 7.top -u apache: ctrl+ M top - 09:19:42 up 2 days, 19 min, 2 users, load average: 0.85, 0.87, 0.80 Tasks: 113 total, 1 running, 112 sleeping, 0 stopped, 0 zombie Cpu(s): 7.3%us, 15.7%sy, 0.0%ni, 75.7%id, 0.0%wa, 0.7%hi, 0.7%si, 0.0%st Mem: 3652120k total, 3149964k used, 502156k free, 348048k buffers Swap: 4425896k total, 0k used, 4425896k free, 1944952k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 16956 apache 20 0 700m 135m 100m S 0.0 3.8 2:16.78 httpd 16953 apache 20 0 565m 130m 96m S 0.0 3.7 1:57.26 httpd 16957 apache 20 0 587m 129m 102m S 0.0 3.6 1:47.41 httpd 16955 apache 20 0 567m 126m 93m S 0.0 3.6 1:43.60 httpd 17494 apache 20 0 626m 125m 96m S 0.0 3.5 1:58.77 httpd 17515 apache 20 0 540m 120m 88m S 0.0 3.4 1:45.57 httpd 17516 apache 20 0 573m 120m 88m S 0.0 3.4 1:50.51 httpd 16954 apache 20 0 551m 120m 88m S 0.0 3.4 1:52.47 httpd 17493 apache 20 0 586m 120m 94m S 0.0 3.4 1:51.02 httpd 17279 apache 20 0 568m 117m 87m S 16.0 3.3 1:51.87 httpd 17302 apache 20 0 560m 116m 90m S 0.3 3.3 1:59.06 httpd 17495 apache 20 0 551m 116m 89m S 0.0 3.3 1:47.51 httpd 17277 apache 20 0 476m 114m 81m S 0.0 3.2 1:37.14 httpd 30097 apache 20 0 536m 113m 83m S 0.0 3.2 1:47.38 httpd 30112 apache 20 0 530m 112m 81m S 0.0 3.2 1:40.15 httpd 17513 apache 20 0 516m 112m 85m S 0.0 3.1 1:43.92 httpd 16958 apache 20 0 554m 111m 82m S 0.0 3.1 1:44.18 httpd 1617 apache 20 0 487m 111m 85m S 0.0 3.1 1:31.67 httpd 16952 apache 20 0 461m 107m 75m S 0.0 3.0 1:13.71 httpd 16951 apache 20 0 462m 103m 76m S 0.0 2.9 1:28.05 httpd 17278 apache 20 0 497m 103m 76m S 0.0 2.9 1:31.25 httpd 17403 apache 20 0 537m 102m 79m S 0.0 2.9 1:52.24 httpd 25081 apache 20 0 412m 101m 70m S 0.0 2.8 1:01.74 httpd I guess thats all information needed to help me solve this problem. I think the virt memory is to big, the same res. The consumption of ram is increasing all the time. Maybe it's memory leak because i see there is so many static modules compiled. Could someone help me with this issue? Thank you in advance.

  Read the article

• Apache logs 200 instead of 404

  - by elle

  I've been getting the following in my apache access log: "GET /work//?module=www&section=working=../../../../../../../../../../../../../../../../../../../../../../../..//proc/self/environ%0000 HTTP/1.1" 200 5187 "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.12) Gecko/20101026 Firefox/3.6.12\",\"Mozilla/5.0 (Windows; U; Windows NT 5.1; pl-PL; rv:1.8.1.24pre) Gecko/20100228 K-Meleon/1.5.4\",\"Mozilla/5.0 (X11; U; Linux x86_64; en-US) AppleWebKit/540.0 (KHTML,like Gecko) Chrome/9.1.0.0 Safari/540.0\",\"Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Comodo_Dragon/4.1.1.11 Chrome/4.1.249.1042 Safari/532.5\",\"Mozilla/5.0 (X11; U; Linux i686 (x86_64); en-US; rv:1.9.0.16) Gecko/2009122206 Firefox/3.0.16 Flock/2.5.6\",\"Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.1 (KHTML, like Gecko) Maxthon/3.0.8.2 Safari/533.1\",\"Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.8.1.8pre) Gecko/20070928 Firefox/2.0.0.7 Navigator/9.0RC1\",\"Opera/9.99 (Windows NT 5.1; U; pl) Presto/9.9.9\",\"Mozilla/5.0 (Windows; U; Windows NT 6.1; zh-HK) AppleWebKit/533.18.1 (KHTML, like Gecko) Version/5.0.2 Safari/533.18.5\",\"Seamonkey-1.1.13-1(X11; U; GNU Fedora fc 10) Gecko/20081112\",\"Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; Win64; x64; Trident/5.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; Zune 4.0; Tablet PC 2.0; InfoPath.3; .NET4.0C; .NET4.0E)\",\"Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MS-RTC LM 8; .NET4.0C; .NET4.0E; InfoPath.3)" If I try the URL, I get a 404 instead of 200 which the above request received. Is there a way I can confirm that the 200 was real and not spoofed? Where is the long info on the client coming from?

  Read the article

• vim-powerline colors are out of whack in urxvt

  - by komidore64

  I have attached two images showing what my vim-powerline looks like. As you can see, something has happened to the colors and I cannot figure out how to fix it. I'm running Fedora 17 on a clean install with i3 (default config) and urxvt. Here is my bashrc: # .bashrc if [[ "$(uname)" != "Darwin" ]]; then # non mac os x # source global bashrc if [[ -f "/etc/bashrc" ]]; then . /etc/bashrc fi export TERM='xterm-256color' # probably shouldn't do this fi # bash prompt with colors # [ <user>@<hostname> <working directory> {current git branch (if you're in a repo)} ] # ==> PS1="\[\e[1;33m\][ \u\[\e[1;37m\]@\[\e[1;32m\]\h\[\e[1;33m\] \W\$(git branch 2> /dev/null | grep -e '\* ' | sed 's/^..\(.*\)/ {\[\e[1;36m\]\1\[\e[1;33m\]}/') ]\[\e[0m\]\n==> " # execute only in Mac OS X if [[ "$(uname)" == 'Darwin' ]]; then # if OS X has a $HOME/bin folder, then add it to PATH if [[ -d "$HOME/bin" ]]; then export PATH="$PATH:$HOME/bin" fi alias ls='ls -G' # ls with colors fi alias ll='ls -lah' # long listing of all files with human readable file sizes alias tree='tree -C' # turns on coloring for tree command alias mkdir='mkdir -p' # create parent directories as needed alias vim='vim -p' # if more than one file, open files in tabs export EDITOR='vim' # super-secret work stuff if [[ -f "$HOME/.workbashrc" ]]; then . $HOME/.workbashrc fi # Add RVM to PATH for scripting if [[ -d "$HOME/.rvm/bin" ]]; then # if installed PATH=$PATH:$HOME/.rvm/bin fi and my Xdefaults: ! URxvt config ! colors! URxvt.background: #101010 URxvt.foreground: #ededed URxvt.cursorColor: #666666 URxvt.color0: #2E3436 URxvt.color8: #555753 URxvt.color1: #993C3C URxvt.color9: #BF4141 URxvt.color2: #3C993C URxvt.color10: #41BF41 URxvt.color3: #99993C URxvt.color11: #BFBF41 URxvt.color4: #3C6199 URxvt.color12: #4174FB URxvt.color5: #993C99 URxvt.color13: #BF41BF URxvt.color6: #3C9999 URxvt.color14: #41BFBF URxvt.color7: #D3D7CF URxvt.color15: #E3E3E3 ! options URxvt*loginShell: true URxvt*font: xft:DejaVu Sans Mono for Powerline:antialias=true:size=12 URxvt*saveLines: 8192 URxvt*scrollstyle: plain URxvt*scrollBar_right: true URxvt*scrollTtyOutput: true URxvt*scrollTtyKeypress: true URxvt*urlLauncher: google-chrome and finally my vimrc set nocompatible set dir=~/.vim/ " set one place for vim swap files " vundler for vim plugins ---- filetype off set rtp+=~/.vim/bundle/vundle call vundle#rc() Bundle 'gmarik/vundle' Bundle 'tpope/vim-surround' Bundle 'greyblake/vim-preview' Bundle 'Lokaltog/vim-powerline' Bundle 'tpope/vim-endwise' Bundle 'kien/ctrlp.vim' " ---------------------------- syntax enable filetype plugin indent on " Powerline ------------------ set noshowmode set laststatus=2 let g:Powerline_symbols = 'fancy' " show fancy symbols (requires patched font) set encoding=utf-8 " ---------------------------- " ctrlp ---------------------- let g:ctrlp_open_multiple_files = 'tj' " open multiple files in additional tabs let g:ctrlp_show_hidden = 1 " include dotfiles and dotdirs in ctrlp indexing let g:ctrlp_prompt_mappings = { \ 'AcceptSelection("e")': ['<c-t>'], \ 'AcceptSelection("t")': ['<cr>', '<2-LeftMouse>'], \ } " remap <cr> to open file in a new tab " ---------------------------- set showcmd set tabpagemax=100 set hlsearch set incsearch set nowrapscan set ignorecase set smartcase set ruler set tabstop=4 set shiftwidth=4 set expandtab set wildmode=list:longest autocmd BufWritePre * :%s/\s\+$//e "remove trailing whitespace " :REV to "revert" file to state of the most recent save command REV earlier 1f " disable netrw -------------- let g:loaded_netrw = 1 let g:loaded_netrwPlugin = 1 " ---------------------------- Any guidance as to fixing the statusline would be fantastic. I've found a github issue outlining almost the exact same problem, but the solution was never posted. Thank you.

  Read the article

• 24+ Coda Alternatives for Windows and Linux

  - by Matt

  Coda plays an important role in designing layout on Mac. There are numerous coda alternatives for windows and Linux too. It is not possible to describe each and everyone so some of the coda alternatives, which work on both windows and Linux platforms, are discussed below. EditPlus $35.00 Good thing about EditPlus is that it highlights URLs and email addresses, activating them when you ‘crtl + double-click’. It also has a built in browser for previewing HTML, and FTP and SFTP support. Also supports Macros and RegEx find and replace. UltraEdit $49.99 It is another good coda alternative for windows and Linux. It is the best suited editor for text, HTML and HEX. It also plays an advanced PHP, Perl, Java and JavaScript editor for programmers. It supports disk-based 64-bit or standard file handling on 32-bit Windows platforms or window 2000 and later versions. HippoEdit $39.95 HippoEDIT has the best autocomplete it gives pop a ‘tooltip’ above your cursor as you type, suggesting words you’ve already typed. It does syntax highlighting for over 2 dozen language. Sublime Text $59.00 Sublime Text awesome ‘zoomed out’ view of the file lets you focus on the area you want. It lets you open a local file when you right-click on its link, and there are a few automation features, so this would make a solid choice of a text editor. Textpad $24.70 TextPad is simple editor with nifty features such as column select, drag-and-drop text between files, and hyperlink support. It also supports large files. Aptana Free Aptana Studio is one of the best editors working on both windows and Linux. It is a complete web development setting that has a nice blend of powerful authoring tools with a collection of online hosting and collaboration services. It is quite helpful as it support for PHP, CSS, FTP, and more. SciTE Free It is a SCIntilla based Text Editor. It has gradually developed as a generally useful editor. It provides for building and running programs. It is best to be used for jobs with simple configurations. SciTE is currently available for Intel Win32 and Linux compatible operating systems with GTK+. It has been run on Windows XP and on Fedora 8 and Ubuntu 7.10 with GTK+ 2.12 E Text Editor $34.96 E Text Editor is a new text editor for Windows, which also works on Linux as well. It has powerful editing features and also some unique abilities. It makes text manipulation quite fast and easy, and makes user focus on his writing as it automatically does all the manual work. It can be extend it in any language. It supports Text Mate bundles, thus allows the user to tap into a huge and active community. Editra Free Editra is an upcoming editor, with some fantastic features such as user profiles, auto-completion, session saving, and syntax highlighing for 60+ languages. Plugins can extend the feature set, offering an integrated python console, FTP client, file browser, and calculator, among others. PSPad Free PSPad is a good Template for writing CSS, as it an internal web browser, and a macro recorder to the table. It also supports hex editing, and some degree of code compiling. JEdit Free It is a mature programmer’s text editor and has taken a good deal of time to be developed as it is today. It is better than many costlier development tools due to its features and simplicity of use. It has been released as free software with full source code, provided under the terms of the GPL 2.0. Which also adds to its attractiveness. NEdit Free It is a multi-purpose text editor for the X Window System, which also works on Linux. It combines a standard, easy to use, graphical user interface with the full functionality and stability required by users who edit text for long period a day. It also provides for thorough support for development in various languages. It also facilitates the use of text processors, and other tools at the same time. It can be used productively by anyone who needs to edit text. It is quite a user-friendly tool. Its salient features include syntax highlighting with built in pattern, auto indent, tab emulation, block indentation adjustment etc. As of version 5.1, NEdit may be freely distributed under the terms of the GNU General Public License. MadEdit Free Mad Edit is an Open-Source and Cross-Platform Text/Hex Editor. It is written in C++ and wxWidgets. MadEdit can edit files in Text/Column/Hex modes. It also supports many useful functions, such as Syntax Highlighting, Word Wrap, Encoding for UTF8/16/32,and others. It also supports word count, which makes it quite a useful text editor for both windows and Linux. It has been recently modified on 10/09/2010. KompoZer Free Kompozer is a complete web authoring system that has a combination of web file management and easy-to-use WYSIWYG web page editing. KompoZer has been designed to be completely and extensively easy to use. It is thus an ideal tool for non-technical computer users who want to create an attractive, professional-looking web site without knowing HTML or web coding. It is based on the NVU source code. Vim Free Vim or “Vi IMproved” is an advanced text editor. Its salient features are syntax highlighting, word completion and it also has a huge amount of contributed content. Vim has several “modes” on offer for editing, which adds to the efficiency in editing. Thus it becomes a non-user-friendly application but it is also strength for its users. The normal mode binds alphanumeric keys to task-oriented commands. The visual mode highlights text. More tools for search & replace, defining functions, etc. are offered through command line mode. Vim comes with complete help. NotePad ++ Free One of the the best free text editor for Windows out there; with support for simple things—like syntax highlighting and folding—all the way up to FTP, Notepad++ should tick most of the boxes Notepad2 Free Notepad2 is also based on the Scintilla editing engine, but it’s much simpler than Notepad++. It bills itself as being fast, light-weight, and Notepad-like. Crimson Editor Free Crimson Editor has the ability to edit remote files, using a built-in FTP client; there’s also a spell checker. TotalEdit Free TotalEdit allows file comparison, RegEx search and replace, and has multiple options for file backup / versioning. For cleanup, it offers (X)HTML and XML customizable formatting, and a spell checker. In-Type Free ConTEXT Free SourceEdit Free SourceEdit includes features such as clipboard history, syntax highlighting and autocompletion for a decent set of languages. A hex editor and FTP client. RJ TextED Free RJ TextED supports integration with TopStyle Lite. Provides HTML validation and formatting. It includes an FTP client, a file browser, and a code browser, as well as a character map and support for email. GEDIT Free It is one of the best coda alternatives for windows and Linux. It has syntax highlighting and is best suitable for programming. It has many attractive features such as full support for UTF-8, undo/redo, and clipboard support, search and replace, configurable syntax highlighting for various languages and many more supportive features. It is extensible with plug ins. Other important coda alternatives for windows and Linux are Redcar, Bluefish Editor, NVU, Ruby Mine, Slick Edit, Geany, Editra, txt2html and CSSED. There are many more. Its up to user to decide which one suits best to his requirements. Related posts:10 Useful Text Editor For Developer Applications to Install & Run Windows on Linux Open Source WYSIWYG Text Editors

  Read the article

• iptables DNS resolution

  - by Favolas

  I have a virtual machine with Fedora 19 acting as a router. This machine as an interface (p8p1) with the IP 172.16.1.254 that is connected to another machine (IP 172.16.1.1) that's simulating the external network. I've installed snort 2.9.2.2, applied the snortsam-2.9.2.2.diff.gz patch and installed snortsam 2.70 on the routermachine In snort.conf besides altering some RULE_PATH I believe I've only added the following line to the file. output alert_fwsam: 127.0.0.1:898/password After doing this two comands: ifconfig p8p1 promisc /usr/local/snort/bin/snort -v -i p8p1 If I ping from the external network to the router IP, I can see the info about the pings. One of the rules that I have is icmp-info.rules that as this single line: alert icmp $EXTERNAL_NET any -> $HOME_NET any (msg:"ICMP-INFO Echo Reply"; icode:0; itype:0; classtype:misc-activity; sid:408; rev:6;fwsam: src, 5 minutes;) snortsam.conf as this data: defaultkey password accept localhost keyinterval 30 minutes dontblock 192.168.1.1 # rede local rollbackhosts 50 rollbackthreshold 20 / 30 secs rollbacksleeptime 1 minute logfile /var/log/snort/snortsam.log loglevel 3 daemon nothreads # linha importante para gerar os bloqueios via iptables iptables p8p1 LOG bindip 127.0.0.1 Now I run this command: /usr/local/snort/bin/snort -u snort -i p8p1 -c /etc/snort/snort.conf -l /var/log/snort -Dq Terminal gives this message: Spawning daemon child... My daemon child 2080 lives... Daemon parent exiting (0) and when I runsnortsam in terminal i got this: SnortSam, v 2.70. Copyright (c) 2001-2009 Frank Knobbe . All rights reserved. Plugin 'fwsam': v 2.5, by Frank Knobbe Plugin 'fwexec': v 2.7, by Frank Knobbe Plugin 'pix': v 2.9, by Frank Knobbe Plugin 'ciscoacl': v 2.12, by Ali Basel <[email protected]> Plugin 'cisconullroute': v 2.5, by Frank Knobbe Plugin 'cisconullroute2': v 2.2, by Wouter de Jong <[email protected]> Plugin 'netscreen': v 2.10, by Frank Knobbe Plugin 'ipchains': v 2.8, by Hector A. Paterno <[email protected]> Plugin 'iptables': v 2.9, by Fabrizio Tivano <[email protected]>, Luis Marichal <[email protected]> Plugin 'ebtables': v 2.4, by Bruno Scatolin <[email protected]> Plugin 'watchguard': v 2.7, by Thomas Maier <[email protected]> Plugin 'email': v 2.12, by Frank Knobbe Plugin 'email-blocks-only': v 2.12, by Frank Knobbe Plugin 'snmpinterfacedown': v 2.3, by Ali BASEL <[email protected]> Plugin 'forward': v 2.8, by Frank Knobbe Parsing config file /etc/snortsam.conf... Linking plugin 'iptables'... Checking for existing state file "/var/db/snortsam.state". Found. Reading state file. Starting to listen for Snort alerts. and snortsam.log as an entry like this 2013/10/25, 10:15:17, -, 1, snortsam, Starting to listen for Snort alerts. Now, from the external machine I do ping 172.16.1.254 and it starts showing the info and an alert file is created in /var/log/snort/ that as the info about the PINGS. Something like: [**] [1:408:6] ICMP-INFO Echo Reply [**] [Classification: Misc activity] [Priority: 3] 10/25-10:35:16.061319 172.16.1.254 -> 172.16.1.1 ICMP TTL:64 TOS:0x0 ID:38720 IpLen:20 DgmLen:84 Type:0 Code:0 ID:1389 Seq:1 ECHO REPLY Also, if I run instead /usr/local/snort/bin/snort snort -v -i p8p1 i got this message: Running in packet dump mode --== Initializing Snort ==-- Initializing Output Plugins! Snort BPF option: snort pcap DAQ configured to passive. The DAQ version does not support reload. Acquiring network traffic from "p8p1". ERROR: Can't set DAQ BPF filter to 'snort' (pcap_daq_set_filter: pcap_compile: syntax error)! Fatal Error, Quitting.. So, this are my questions: Shouldn't snortsam block the PING? Is that DAQ error causing the problem? If so, How can I solve it?

  Read the article

• How do i change the BIOS boot splash screen?

  - by YumYumYum

  I have a Dell PC which has very ugly and bad luck looking Alien face on every boot. I want to change it or disable it forever, but in Bios they do not have any options. How can i change this from my linux Fedora or ArchLinux which is running now? Tried following does not work. ( http://www.pixelbeat.org/docs/bios/ ) ./flashrom -r firmware.old #save current flash ROM just in case ./flashrom -wv firmware.new #write and verify new flash ROM image Also tried: $ cat c.c #include <stdio.h> #include <inttypes.h> #include <netinet/in.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #define lengthof(x) (sizeof(x)/sizeof(x[0])) uint16_t checksum(const uint8_t* data, int len) { uint16_t sum = 0; int i; for (i=0; i<len; i++) sum+=*(data+i); return htons(sum); } void usage(void) { fprintf(stderr,"Usage: therm_limit [0,50,53,56,60,63,66,70]\n"); fprintf(stderr,"Report therm limit of terminal in BIOS\n"); fprintf(stderr,"If temp specifed, it is changed if required.\n"); exit(EXIT_FAILURE); } #define CHKSUM_START 51 #define CHKSUM_END 109 #define THERM_OFFSET 67 #define THERM_SHIFT 0 #define THERM_MASK (0x7 << THERM_SHIFT) #define THERM_OFF 0 uint8_t thermal_limits[]={0,50,53,56,60,63,66,70}; #define THERM_MAX (lengthof(thermal_limits)-1) #define DEV_NVRAM "/dev/nvram" #define NVRAM_MAX 114 uint8_t nvram[NVRAM_MAX]; int main(int argc, char* argv[]) { int therm_request = -1; if (argc>2) usage(); if (argc==2) { if (*argv[1]=='-') usage(); therm_request=atoi(argv[1]); int i; for (i=0; i<lengthof(thermal_limits); i++) if (thermal_limits[i]==therm_request) break; if (i==lengthof(thermal_limits)) usage(); else therm_request=i; } int fd_nvram=open(DEV_NVRAM, O_RDWR); if (fd_nvram < 0) { fprintf(stderr,"Error opening %s [%m]\n", DEV_NVRAM); exit(EXIT_FAILURE); } if (read(fd_nvram, nvram, sizeof(nvram))==-1) { fprintf(stderr,"Error reading %s [%m]\n", DEV_NVRAM); close(fd_nvram); exit(EXIT_FAILURE); } uint16_t chksum = *(uint16_t*)(nvram+CHKSUM_END); printf("%04X\n",chksum); exit(0); if (chksum == checksum(nvram+CHKSUM_START, CHKSUM_END-CHKSUM_START)) { uint8_t therm_byte = *(uint16_t*)(nvram+THERM_OFFSET); uint8_t therm_status=(therm_byte & THERM_MASK) >> THERM_SHIFT; printf("Current thermal limit: %d°C\n", thermal_limits[therm_status]); if ( (therm_status == therm_request) ) therm_request=-1; if (therm_request != -1) { if (therm_status != therm_request) printf("Setting thermal limit to %d°C\n", thermal_limits[therm_request]); uint8_t new_therm_byte = (therm_byte & ~THERM_MASK) | (therm_request << THERM_SHIFT); *(uint8_t*)(nvram+THERM_OFFSET) = new_therm_byte; *(uint16_t*)(nvram+CHKSUM_END) = checksum(nvram+CHKSUM_START, CHKSUM_END-CHKSUM_START); (void) lseek(fd_nvram,0,SEEK_SET); if (write(fd_nvram, nvram, sizeof(nvram))!=sizeof(nvram)) { fprintf(stderr,"Error writing %s [%m]\n", DEV_NVRAM); close(fd_nvram); exit(EXIT_FAILURE); } } } else { fprintf(stderr,"checksum failed. Aborting\n"); close(fd_nvram); exit(EXIT_FAILURE); } return EXIT_SUCCESS; } $ gcc c.c -o bios # ./bios 16DB

  Read the article

• first install for windows eight.....da beta

  - by raysmithequip

  The W8 preview is now installed and I am enjoying it.  I remember the learning curve of my first unix machine back in the eighties, this ain't that.It is normal for me to do the first os install with a keyboard and low end monitor...you never know what you'll encounter out in the field.  The OS took like a fish to water.  I used a low end INTEL motherboard dp55w I gathered on the cheap, an 1157 i5 from the used bin a pair of 6 gig ddr3 sticks, a rosewell 550 watt power supply a cheap used twenty buck sub 200g wd sata drive, a half working dvd burner and an asus fanless nvidia vid card, not a great one but Sub 50.00 on newey eggey...I did have to hunt the ms forums for a key and of course to activate the thing, if dos would of needed this outmoded ritual, we would still be on cpm and osborne would be a household name, of course little do people know that this ritual was common as far back as the seventies on att unix installs....not, but it was possible, I used to joke about when I ran a bbs, what hell would of been wrought had dos 3.2 machines been required to dial into my bbs to send fido mail to ms and wait for an acknowledgement.  All in all the thing was pushing a seven on the ms richter scale, not including the vid card, sadly it came in at just a tad over three....I wanted to evaluate it for a possible replacement on critical machines that in the past went down due to a vid card fan failure....you have no idea what a customer thinks when you show them a failed vid card fan..."you mean that little plastic piece of junk caused all this!!??!!!"...yea man.  Some production machines don't need any sort of vid, I will at least keep it on the maybe list for those, MTBF is a very important factor, some big box stores should put percentage of failure rate within 24 month estimates on the outside of the carton for sure.  And a warning that the power supplies are already at their limit.  Let's face it, today even 550w can be iffy.A few neat eye candy improvements over the earlier windows is nice, the metro screen is nice, anyone who has used a newer phone recently will intuitively drag their fingers across the screen....lot of good that was with no mouse or touch screen though.  Lucky me, I have been using windows since day one, I still have a copy of win 2.0 (and every other version) for no good reason.  Still the old ix collection of disks is much larger, recompiling any kernal is another silly ritual, same machine, different day, same recompile...argh. Rh is my all time fav, mandrake was always missing something, like it rewrote the init file or something, novell is ok as long as you stay on the beaten path and of course ubuntu normally recompiles with the same errors consistantly....makes life easy that way....no errors on windows eight, just a screen that did not match the installed hardware, natuarally I alt tabbed right out of it, then hit the flag key to find the start menu....no start button. I miss the start button already. Keyboard cowboy funnin and I was browsing the harddrive, nothing stunning there, I like that, means I can find stuff. Only I can't find what I want, the start button....the start menu is that first screen for touch tablets. No biggie for useruser, that is where they will want to be, I can see that. Admins won't want to be there, it is easy enough to get the control panel a bazzilion other ways though, just not the start button. (see a pattern here?). Personally, from the keyboard I find it fun to hit the carets along the location bar at the top of the explorer screen with tabs and arrows and choose SHOW ALL CONTROL PANEL ITEMS, or thereabouts. Bottom line, I love seven and I'll love eight even more!...very happy I did not have to follow the normal rule of thumb (a customer watching me build a system and asking questions said "oh I get it, so every piece you put in there is basically a hundred bucks, right?)...ok, sure, pretty much, more or less, well, ya dude.  It will be WAY past october till I get a real touch screen but I did pick up a pair of cheap tatungs so I can try the NEW main start screen, I parse a lot of folders and have a vision of how a pair of touch screens will be easier than landing a rover on mars.  Ok.  fine, they are way smallish, and I don't expect multitouch to work but we are talking a few percent of a new 21 inch viewsonic touch screen.  Will this OS be a game changer?  I don't know.  Bottom line with all the pads and droids in the world, it is more of a catch up move at first glance.  Not something ms is used to.  An app store?  I can see ms's motivation, the others have it.  I gather there will not be gadgets there, go ahead and see what ms did  to the once populated gadget page...go ahead, google gadgets and take a gander, used to hundreds of gadgets, they are already gone.  They replaced gadgets?  sort of, I'll drop that, it's a bit of a sore point for me.  More of interest was what happened when I downloaded stuff off codeplex and some other normal programs that I like, like orbitron, top o' my list!!...cardware it is...anyways, click on the exe, get a screen, normal for windows, this one indicated that I was not running a normal windows program and had a button for  exit the install, naw, I hit details, a hidden run program anyways came into view....great, my path to the normal windows has detected a program tha.....yea ok, acl is on, fine, moving along I got orbitron installed in record time and was tracking the iss on the newest Microsoft OS, beta of course, felt like the first time I setup bsd all those year ago...FUN!!...I suppose I gotta start to think about budgeting for the real os when it comes out in october, by then I should have a rasberry pi and be done with fedora remixed.  Of course that sounds like fun too!!  I would use this OS on a tablet or phone.  I don't like the idea of being hearded to an app store, don't like that on anything, we are americans and want real choices not marketed hype, lest you are younger with opm (other peoples money).   This os would be neat on a zune, but I suspect the zune is a gonner, I am rooting for microsoft, after all their default password is not admin anymore, nor alpine,  it's blank. Others force a password, my first fawn password was so long I could not even log into it with the password in front of me, who the heck uses %$# anyways, and if I was writing a brute force attack what the heck kinda impasse is that anyways at .00001 microseconds of a code execution cycle (just a non qualified number, not a real clock speed)....AI is where it will be before too long, MS is on that path, perhaps soon someone will sit down and write an app for the kinect that watches your eyes while you scan the new main start screen, clicking on the big E icon when you blink.....boy is that going to be fun!!!! sure. Blink,dammit,blink,dammit...... OPM no doubt.I like windows eight, we are moving forwards, better keep a close eye on ubuntu.  The real clinch comes when open source becomes paid source......don't blink, I already see plenty of very expensive 'ix apps, some even in app stores already.  more to come.......

  Read the article

• Outlook Web Access, reverse proxy and browser

  - by M'vy

  Hi SF'ers! We recently moved an exchange server behind a reverse proxy due to the loss of a public IP. I've managed to configure the reverse proxy (httpd proxy_http). But there is a problem for the SSL configuration. When accessing the OWA interface with Firefox, all is ok and working. When accessing with MSIE or Chrome, they do not retrieve the good SSL Certificate. I think this is due to the multiples virtual host for httpd. Is there a workaround to make sure MSIE/Chrome request the certificate for the good domain name like FF does? Already tested with the SSL virtual host : SetEnvIf User-Agent ".*MSIE.*" value BrowserMSIE Header unset WWW-Authenticate Header add WWW-Authenticate "Basic realm=exchange.domain.com" A: ProxyPreserveHost On also: BrowserMatch ".*MSIE.*" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 Or: SetEnvIf User-Agent ".*MSIE.*" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 And lots of ProxyPassand ProxyReversePath on /exchweb /exchange /public etc... And it still don't seem to work. Any clue? Thanks. Edit 1: Precision of versions # openssl version OpenSSL 0.9.8k-fips 25 Mar 2009 /usr/sbin/httpd -v Server version: Apache/2.2.11 (Unix) Server built: Mar 17 2009 09:15:10 Browser versions : MSIE : 8.0.6001 Opera: Version 11.01 Revision 1190 Firefox: 3.6.15 Chrome: 10.0.648.151 Operating System: Windows Vista 32bits. They are all SNI compliant, I've tested them this afternoon https://sni.velox.ch/ You're right Shane Madden, I have multiple sites on the same public IP (and same port as well). The server itself is just a reverse proxy, that rewrite addresses to internal servers. The default host is a dev site, configure with the certificate that does not match the OWA (of course... would have been to easy) <VirtualHost *:443> ServerName dev2.domain.com ServerAdmin [email protected] CustomLog "| /usr/sbin/rotatelogs /var/log/httpd/access-%y%m%d.log 86400" combined ErrorLog "| /usr/sbin/rotatelogs /var/log/httpd/error-%y%m%d.log 86400" LogLevel warn RewriteEngine on SetEnvIfNoCase X-Forwarded-For .+ proxy=yes SSLEngine on SSLProtocol -all +SSLv3 +TLSv1 SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL:+SSLv3 SSLCertificateFile /etc/httpd/ssl/domain.com.crt SSLCertificateKeyFile /etc/httpd/ssl/domain.com.key RewriteCond %{HTTP_HOST} dev2\.domain\.com RewriteRule ^/(.*)$ http://dev2.domain.com/$1 [L,P] </VirtualHost> The certificate of domain is a *.domain.com The second vHost is : <VirtualHost *:443> ServerName exchange.domain2.com ServerAdmin [email protected] CustomLog "| /usr/sbin/rotatelogs /var/log/httpd/exchange/access-%y%m%d.log 86400" combined ErrorLog "| /usr/sbin/rotatelogs /var/log/httpd/exchange/error-%y%m%d.log 86400" LogLevel warn SSLEngine on SSLProxyEngine On SSLProtocol -all +SSLv3 +TLSv1 SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL:+SSLv3 SSLCertificateFile /etc/httpd/ssl/exchange.pem SSLCertificateKeyFile /etc/httpd/ssl/exchange.key RewriteEngine on SetEnvIfNoCase X-Forwarded-For .+ proxy=yes RewriteCond %{HTTP_HOST} exchange\.domain2\.com RewriteRule ^/(.*)$ https://exchange.domain2.com/$1 [L,P] </VirtualHost> and it's certificate is exchange.domain2.com only. I presume the SNI is somewhere not activated on my server. The versions of openssl and apache seams to be ok for the SNI support. The only thing I do not know is if httpd has been compile with the good options. (I assume it's a fedora packet).

  Read the article

• Samba doesnt require password on xbmc but does on ubuntu

  - by Chris

  I have samba setup on a fedora 13 machine, and I use it to share with my xbmc client in the family room. When I set this up there no password or anything was required I merely entered in paths such as: smb://<host>/<share> and all worked. Now on my ubuntu 10.04 machine when I try to access the same hosts, for example through smbmount though I receive an error. smbmount //media/Music ~/Music/ # media is in my /etc/hosts and resolves to # correct IP address for the machine I receive error: operation not permitted after pressing enter when it prompts for password. Here is my entry from /etc/samba/smb.conf: [global] workgroup = WORKGROUP server string = Samba Server Version %v # log files split per-machine: log file = /var/log/samba/log.%m # maximum size of 50KB per log file, then rotate: max log size = 50 security = user passdb backend = tdbsam ; security = domain ; passdb backend = tdbsam ; realm = MY_REALM ; password server = <NT-Server-Name> ; security = user ; passdb backend = tdbsam ; domain master = yes ; domain logons = yes ; logon script = %m.bat ; logon script = %u.bat ; logon path = \\%L\Profiles\%u ; logon path = ; add user script = /usr/sbin/useradd "%u" -n -g users ; add group script = /usr/sbin/groupadd "%g" ; add machine script = /usr/sbin/useradd -n -c "Workstation (%u)" -M -d /nohome -s /bin/false "%u" ; delete user script = /usr/sbin/userdel "%u" ; delete user from group script = /usr/sbin/userdel "%u" "%g" ; delete group script = /usr/sbin/groupdel "%g" ; local master = no ; os level = 33 ; preferred master = yes ; wins support = yes ; wins server = w.x.y.z ; wins proxy = yes ; dns proxy = yes load printers = yes cups options = raw ; printcap name = /etc/printcap # obtain a list of printers automatically on UNIX System V systems: ; printcap name = lpstat ; printing = cups ; map archive = no ; map hidden = no ; map read only = no ; map system = no ; store dos attributes = yes #============================ Share Definitions ============================== [homes] comment = Home Directories browseable = no writable = yes ; valid users = %S ; valid users = MYDOMAIN\%S # Un-comment the following and create the netlogon directory for Domain Logons: ; [netlogon] ; comment = Network Logon Service ; path = /var/lib/samba/netlogon ; guest ok = yes ; writable = no ; share modes = no # Un-comment the following to provide a specific roving profile share. # The default is to use the user's home directory: ; [Profiles] ; path = /var/lib/samba/profiles ; browseable = no ; guest ok = yes # A publicly accessible directory that is read only, except for users in the # "staff" group (which have write permissions): ; [public] ; comment = Public Stuff ; path = /home/samba ; public = yes ; writable = yes ; printable = no ; write list = +staff [tv] comment = TV path = /media/Isos/tv public = yes writable = yes printable = no write list = +media [music] comment = Music path = /media/Storage/music/ public = yes writable = yes printable = no write list = +media [pictures] comment = Pictures path = /media/Storage/pictures public = yes writable = yes printable = no write list = +media

  Read the article

• Is this valid JFS partition?

  - by Coolmax

  This is my first question on StackExchange. My teacher gave my his laptop (with Fedora 16 on it) and compact flash card with data. He want to have access to files on card, but he couldn't get access to it. The problem is Linux don't know what type of partion is. I suppose there is JFS: root@debian:~# dmesg |grep sdc [ 9066.908223] sd 3:0:0:1: [sdc] 3940272 512-byte logical blocks: (2.01 GB/1.87 GiB) [ 9066.962307] sd 3:0:0:1: [sdc] Write Protect is off [ 9066.962310] sd 3:0:0:1: [sdc] Mode Sense: 03 00 00 00 [ 9066.962312] sd 3:0:0:1: [sdc] Assuming drive cache: write through [ 9067.028420] sd 3:0:0:1: [sdc] Assuming drive cache: write through [ 9067.028637] sdc: unknown partition table [ 9067.097065] sd 3:0:0:1: [sdc] Assuming drive cache: write through [ 9067.097281] sd 3:0:0:1: [sdc] Attached SCSI removable disk and some of data: root@debian:~# hexdump -Cn 65536 /dev/sdc 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00008000 4a 46 53 31 01 00 00 00 48 63 0e 00 00 00 00 00 |JFS1....Hc......| 00008010 00 10 00 00 0c 00 03 00 00 02 00 00 09 00 00 00 |................| 00008020 00 20 00 00 00 09 20 10 02 00 00 00 00 00 00 00 |. .... .........| 00008030 04 00 00 00 26 00 00 00 02 00 00 00 24 00 00 00 |....&.......$...| 00008040 41 03 00 00 16 00 00 00 00 02 00 00 a0 cc 01 00 |A...............| 00008050 37 00 00 00 69 cc 01 00 b6 d8 ac 4b 00 00 00 00 |7...i......K....| 00008060 32 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 |2...............| 00008070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00008080 00 00 00 00 00 00 00 00 90 15 e5 5f e3 c4 45 fa |..........._..E.| 00008090 9d 6a 5c b5 4f da 62 1a 00 00 00 00 00 00 00 00 |.j\.O.b.........| 000080a0 00 00 00 00 00 00 00 00 c3 c9 01 00 ed 81 00 00 |................| 000080b0 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 000080c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * [cut] * 0000f000 4a 46 53 31 01 00 00 00 48 63 0e 00 00 00 00 00 |JFS1....Hc......| 0000f010 00 10 00 00 0c 00 03 00 00 02 00 00 09 00 00 00 |................| 0000f020 00 20 00 00 00 09 20 10 00 00 00 00 00 00 00 00 |. .... .........| 0000f030 04 00 00 00 26 00 00 00 02 00 00 00 24 00 00 00 |....&.......$...| 0000f040 41 03 00 00 16 00 00 00 00 02 00 00 a0 cc 01 00 |A...............| 0000f050 37 00 00 00 69 cc 01 00 b6 d8 ac 4b 00 00 00 00 |7...i......K....| 0000f060 32 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 |2...............| 0000f070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 0000f080 00 00 00 00 00 00 00 00 90 15 e5 5f e3 c4 45 fa |..........._..E.| 0000f090 9d 6a 5c b5 4f da 62 1a 00 00 00 00 00 00 00 00 |.j\.O.b.........| 0000f0a0 00 00 00 00 00 00 00 00 c3 c9 01 00 ed 81 00 00 |................| 0000f0b0 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 0000f0c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00010000 I'm total newbie to filesystems. I googled and found that JFS superblock may starts on 0x8000 offset. But what next? How to mount this card? If there would be normal partition table I would expect 55 AA on 510th and 511th byte, but first 8000 bytes are clear. Any help would be greatly appreciated. And sorry for my bad english :) Kind regards.

  Read the article

• localhost/phpmyadmin pulls blank page

  - by Atul Modi

  When I tried configuring local machine as a Internet Gateway with website development capabilities over it and I installed all required software into it. I also had disable the selinux into it. But PROBLEM is when I do http://localhost/phpMyAdmin or all lower case than the page shows it as a blank page. I am pasting code from httpd.conf file into this as well as from phpMyAdmin.conf file I am using Fedora 16 for this. httpd.conf ServerTokens OS ServerRoot "/etc/httpd" PidFile run/httpd.pid Timeout 60 KeepAlive Off MaxKeepAliveRequests 100 KeepAliveTimeout 5 StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 256 MaxClients 256 MaxRequestsPerChild 4000 StartServers 4 MaxClients 300 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 Listen 80 LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule auth_digest_module modules/mod_auth_digest.so LoadModule authn_file_module modules/mod_authn_file.so LoadModule authn_alias_module modules/mod_authn_alias.so LoadModule authn_anon_module modules/mod_authn_anon.so LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule authn_dbd_module modules/mod_authn_dbd.so LoadModule dbd_module modules/mod_dbd.so LoadModule ldap_module modules/mod_ldap.so LoadModule authnz_ldap_module modules/mod_authnz_ldap.so LoadModule include_module modules/mod_include.so LoadModule log_config_module modules/mod_log_config.so LoadModule logio_module modules/mod_logio.so LoadModule env_module modules/mod_env.so LoadModule ext_filter_module modules/mod_ext_filter.so LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule expires_module modules/mod_expires.so LoadModule deflate_module modules/mod_deflate.so LoadModule headers_module modules/mod_headers.so LoadModule usertrack_module modules/mod_usertrack.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule mime_module modules/mod_mime.so LoadModule dav_module modules/mod_dav.so LoadModule status_module modules/mod_status.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule info_module modules/mod_info.so LoadModule dav_fs_module modules/mod_dav_fs.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule actions_module modules/mod_actions.so LoadModule speling_module modules/mod_speling.so LoadModule userdir_module modules/mod_userdir.so LoadModule alias_module modules/mod_alias.so LoadModule substitute_module modules/mod_substitute.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_balancer_module modules/mod_proxy_balancer.so LoadModule proxy_ftp_module modules/mod_proxy_ftp.so LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule proxy_ajp_module modules/mod_proxy_ajp.so LoadModule proxy_connect_module modules/mod_proxy_connect.so LoadModule cache_module modules/mod_cache.so LoadModule suexec_module modules/mod_suexec.so LoadModule disk_cache_module modules/mod_disk_cache.so LoadModule cgi_module modules/mod_cgi.so LoadModule version_module modules/mod_version.so Include conf.d/*.conf User apache Group apache ServerAdmin root@localhost UseCanonicalName Off DocumentRoot "/var/www/html" Options FollowSymLinks AllowOverride None Options Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all UserDir disabled DirectoryIndex index.html index.htm index.php AccessFileName .htaccess Order allow,deny Deny from all Satisfy All TypesConfig /etc/mime.types DefaultType text/plain MIMEMagicFile conf/magic HostnameLookups Off ErrorLog logs/error_log LogLevel warn LogFormat "%h %l %u %t \"%r\" %s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %s %b" common LogFormat "%{Referer}i - %U" referer LogFormat "%{User-agent}i" agent CustomLog logs/access_log combined ServerSignature On Alias /icons/ "/var/www/icons/" Options Indexes MultiViews FollowSymLinks AllowOverride None Order allow,deny Allow from all # Location of the WebDAV lock database. DAVLockDB /var/lib/dav/lockdb ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" AllowOverride None Options None Order allow,deny Allow from all IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable Charset=UTF-8 AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip AddIconByType (TXT,/icons/text.gif) text/* AddIconByType (IMG,/icons/image2.gif) image/* AddIconByType (SND,/icons/sound2.gif) audio/* AddIconByType (VID,/icons/movie.gif) video/* AddIcon /icons/binary.gif .bin .exe AddIcon /icons/binhex.gif .hqx AddIcon /icons/tar.gif .tar AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip AddIcon /icons/a.gif .ps .ai .eps AddIcon /icons/layout.gif .html .shtml .htm .pdf AddIcon /icons/text.gif .txt AddIcon /icons/c.gif .c AddIcon /icons/p.gif .pl .py AddIcon /icons/f.gif .for AddIcon /icons/dvi.gif .dvi AddIcon /icons/uuencoded.gif .uu AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl AddIcon /icons/tex.gif .tex AddIcon /icons/bomb.gif core AddIcon /icons/back.gif .. AddIcon /icons/hand.right.gif README AddIcon /icons/folder.gif ^^DIRECTORY^^ AddIcon /icons/blank.gif ^^BLANKICON^^ DefaultIcon /icons/unknown.gif ReadmeName README.html HeaderName HEADER.html IndexIgnore .??* *~ # HEADER README* RCS CVS *,v *,t AddLanguage ca .ca AddLanguage cs .cz .cs AddLanguage da .dk AddLanguage de .de AddLanguage el .el AddLanguage en .en AddLanguage eo .eo AddLanguage es .es AddLanguage et .et AddLanguage fr .fr AddLanguage he .he AddLanguage hr .hr AddLanguage it .it AddLanguage ja .ja AddLanguage ko .ko AddLanguage ltz .ltz AddLanguage nl .nl AddLanguage nn .nn AddLanguage no .no AddLanguage pl .po AddLanguage pt .pt AddLanguage pt-BR .pt-br AddLanguage ru .ru AddLanguage sv .sv AddLanguage zh-CN .zh-cn AddLanguage zh-TW .zh-tw LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW ForceLanguagePriority Prefer Fallback AddDefaultCharset UTF-8 AddType application/x-tar .tgz AddType application/x-httpd-php .php AddType application/x-httpd-php .xml AddHandler application/x-httpd-php .xml AddType application/x-compress .Z AddType application/x-gzip .gz .tgz AddType application/x-x509-ca-cert .crt AddType application/x-pkcs7-crl .crl AddHandler type-map var AddType text/html .shtml AddOutputFilter INCLUDES .shtml Alias /error/ "/var/www/error/" AllowOverride None Options IncludesNoExec AddOutputFilter Includes html AddHandler type-map var Order allow,deny Allow from all LanguagePriority en ForceLanguagePriority Prefer Fallback ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var BrowserMatch "Mozilla/2" nokeepalive BrowserMatch "MSIE 4.0b2;" nokeepalive downgrade-1.0 force-response-1.0 BrowserMatch "RealPlayer 4.0" force-response-1.0 BrowserMatch "Java/1.0" force-response-1.0 BrowserMatch "JDK/1.0" force-response-1.0 BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully BrowserMatch "MS FrontPage" redirect-carefully BrowserMatch "^WebDrive" redirect-carefully BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully BrowserMatch "^gnome-vfs/1.0" redirect-carefully BrowserMatch "^XML Spy" redirect-carefully BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully Order allow,deny Allow from all # phpMyAdmin.conf Alias /phpMyAdmin /usr/share/phpMyAdmin Alias /phpmyadmin /usr/share/phpMyAdmin Order Allow,Deny Allow from All Allow from 127.0.0.1 Allow from ::1 Order Allow,Deny Allow from All Allow from 127.0.0.1 Allow from ::1 Order Deny,Allow Deny from All Allow from None Order Deny,Allow Deny from All Allow from None Order Deny,Allow Deny from All Allow from None Can anyone help into this area please. Urgent reply will be appreciatable because i am struggling since one and half month for this matter. thank you, Atul

  Read the article

• Improving SAS multipath to JBOD performance on Linux

  - by user36825

  Hello all I'm trying to optimize a storage setup on some Sun hardware with Linux. Any thoughts would be greatly appreciated. We have the following hardware: Sun Blade X6270 2* LSISAS1068E SAS controllers 2* Sun J4400 JBODs with 1 TB disks (24 disks per JBOD) Fedora Core 12 2.6.33 release kernel from FC13 (also tried with latest 2.6.31 kernel from FC12, same results) Here's the datasheet for the SAS hardware: http://www.sun.com/storage/storage_networking/hba/sas/PCIe.pdf It's using PCI Express 1.0a, 8x lanes. With a bandwidth of 250 MB/sec per lane, we should be able to do 2000 MB/sec per SAS controller. Each controller can do 3 Gb/sec per port and has two 4 port PHYs. We connect both PHYs from a controller to a JBOD. So between the JBOD and the controller we have 2 PHYs * 4 SAS ports * 3 Gb/sec = 24 Gb/sec of bandwidth, which is more than the PCI Express bandwidth. With write caching enabled and when doing big writes, each disk can sustain about 80 MB/sec (near the start of the disk). With 24 disks, that means we should be able to do 1920 MB/sec per JBOD. multipath { rr_min_io 100 uid 0 path_grouping_policy multibus failback manual path_selector "round-robin 0" rr_weight priorities alias somealias no_path_retry queue mode 0644 gid 0 wwid somewwid } I tried values of 50, 100, 1000 for rr_min_io, but it doesn't seem to make much difference. Along with varying rr_min_io I tried adding some delay between starting the dd's to prevent all of them writing over the same PHY at the same time, but this didn't make any difference, so I think the I/O's are getting properly spread out. According to /proc/interrupts, the SAS controllers are using a "IR-IO-APIC-fasteoi" interrupt scheme. For some reason only core #0 in the machine is handling these interrupts. I can improve performance slightly by assigning a separate core to handle the interrupts for each SAS controller: echo 2 /proc/irq/24/smp_affinity echo 4 /proc/irq/26/smp_affinity Using dd to write to the disk generates "Function call interrupts" (no idea what these are), which are handled by core #4, so I keep other processes off this core too. I run 48 dd's (one for each disk), assigning them to cores not dealing with interrupts like so: taskset -c somecore dd if=/dev/zero of=/dev/mapper/mpathx oflag=direct bs=128M oflag=direct prevents any kind of buffer cache from getting involved. None of my cores seem maxed out. The cores dealing with interrupts are mostly idle and all the other cores are waiting on I/O as one would expect. Cpu0 : 0.0%us, 1.0%sy, 0.0%ni, 91.2%id, 7.5%wa, 0.0%hi, 0.2%si, 0.0%st Cpu1 : 0.0%us, 0.8%sy, 0.0%ni, 93.0%id, 0.2%wa, 0.0%hi, 6.0%si, 0.0%st Cpu2 : 0.0%us, 0.6%sy, 0.0%ni, 94.4%id, 0.1%wa, 0.0%hi, 4.8%si, 0.0%st Cpu3 : 0.0%us, 7.5%sy, 0.0%ni, 36.3%id, 56.1%wa, 0.0%hi, 0.0%si, 0.0%st Cpu4 : 0.0%us, 1.3%sy, 0.0%ni, 85.7%id, 4.9%wa, 0.0%hi, 8.1%si, 0.0%st Cpu5 : 0.1%us, 5.5%sy, 0.0%ni, 36.2%id, 58.3%wa, 0.0%hi, 0.0%si, 0.0%st Cpu6 : 0.0%us, 5.0%sy, 0.0%ni, 36.3%id, 58.7%wa, 0.0%hi, 0.0%si, 0.0%st Cpu7 : 0.0%us, 5.1%sy, 0.0%ni, 36.3%id, 58.5%wa, 0.0%hi, 0.0%si, 0.0%st Cpu8 : 0.1%us, 8.3%sy, 0.0%ni, 27.2%id, 64.4%wa, 0.0%hi, 0.0%si, 0.0%st Cpu9 : 0.1%us, 7.9%sy, 0.0%ni, 36.2%id, 55.8%wa, 0.0%hi, 0.0%si, 0.0%st Cpu10 : 0.0%us, 7.8%sy, 0.0%ni, 36.2%id, 56.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu11 : 0.0%us, 7.3%sy, 0.0%ni, 36.3%id, 56.4%wa, 0.0%hi, 0.0%si, 0.0%st Cpu12 : 0.0%us, 5.6%sy, 0.0%ni, 33.1%id, 61.2%wa, 0.0%hi, 0.0%si, 0.0%st Cpu13 : 0.1%us, 5.3%sy, 0.0%ni, 36.1%id, 58.5%wa, 0.0%hi, 0.0%si, 0.0%st Cpu14 : 0.0%us, 4.9%sy, 0.0%ni, 36.4%id, 58.7%wa, 0.0%hi, 0.0%si, 0.0%st Cpu15 : 0.1%us, 5.4%sy, 0.0%ni, 36.5%id, 58.1%wa, 0.0%hi, 0.0%si, 0.0%st Given all this, the throughput reported by running "dstat 10" is in the range of 2200-2300 MB/sec. Given the math above I would expect something in the range of 2*1920 ~= 3600+ MB/sec. Does anybody have any idea where my missing bandwidth went? Thanks!

  Read the article

• KVM/Libvirt bridged/routed networking not working on newer guest kernels

  - by SharkWipf

  I have a dedicated server running Debian 6, with Libvirt (0.9.11.3) and Qemu-KVM (qemu-kvm-1.0+dfsg-11, Debian). I am having a problem getting bridged/routed networking to work in KVM guests with newer kernels (2.6.38). NATted networking works fine though. Older kernels work perfectly fine as well. The host kernel is at version 3.2.0-2-amd64, the problem was also there on an older host kernel. The contents of the host's /etc/network/interfaces (ip removed): # Loopback device: auto lo iface lo inet loopback # bridge auto br0 iface br0 inet static address 176.9.xx.xx broadcast 176.9.xx.xx netmask 255.255.255.224 gateway 176.9.xx.xx pointopoint 176.9.xx.xx bridge_ports eth0 bridge_stp off bridge_maxwait 0 bridge_fd 0 up route add -host 176.9.xx.xx dev br0 # VM IP post-up mii-tool -F 100baseTx-FD br0 # default route to access subnet up route add -net 176.9.xx.xx netmask 255.255.255.224 gw 176.9.xx.xx br0 The output of ifconfig -a on the host: br0 Link encap:Ethernet HWaddr 54:04:a6:8a:66:13 inet addr:176.9.xx.xx Bcast:176.9.xx.xx Mask:255.255.255.224 inet6 addr: fe80::5604:a6ff:fe8a:6613/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:20216729 errors:0 dropped:0 overruns:0 frame:0 TX packets:19962220 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:14144528601 (13.1 GiB) TX bytes:7990702656 (7.4 GiB) eth0 Link encap:Ethernet HWaddr 54:04:a6:8a:66:13 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:26991788 errors:0 dropped:12066 overruns:0 frame:0 TX packets:19737261 errors:270082 dropped:0 overruns:0 carrier:270082 collisions:1686317 txqueuelen:1000 RX bytes:15459970915 (14.3 GiB) TX bytes:6661808415 (6.2 GiB) Interrupt:17 Memory:fe500000-fe520000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:6240133 errors:0 dropped:0 overruns:0 frame:0 TX packets:6240133 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6081956230 (5.6 GiB) TX bytes:6081956230 (5.6 GiB) virbr0 Link encap:Ethernet HWaddr 52:54:00:79:e4:5a inet addr:192.168.100.1 Bcast:192.168.100.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:225016 errors:0 dropped:0 overruns:0 frame:0 TX packets:412958 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:16284276 (15.5 MiB) TX bytes:687827984 (655.9 MiB) virbr0-nic Link encap:Ethernet HWaddr 52:54:00:79:e4:5a BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) vnet0 Link encap:Ethernet HWaddr fe:54:00:93:4e:68 inet6 addr: fe80::fc54:ff:fe93:4e68/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:607670 errors:0 dropped:0 overruns:0 frame:0 TX packets:5932089 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:83574773 (79.7 MiB) TX bytes:1092482370 (1.0 GiB) vnet1 Link encap:Ethernet HWaddr fe:54:00:ed:6a:43 inet6 addr: fe80::fc54:ff:feed:6a43/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:922132 errors:0 dropped:0 overruns:0 frame:0 TX packets:6342375 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:251091242 (239.4 MiB) TX bytes:1629079567 (1.5 GiB) vnet2 Link encap:Ethernet HWaddr fe:54:00:0d:cb:3d inet6 addr: fe80::fc54:ff:fe0d:cb3d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9461 errors:0 dropped:0 overruns:0 frame:0 TX packets:665189 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:4990275 (4.7 MiB) TX bytes:49229647 (46.9 MiB) vnet3 Link encap:Ethernet HWaddr fe:54:cd:83:eb:aa inet6 addr: fe80::fc54:cdff:fe83:ebaa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1649 errors:0 dropped:0 overruns:0 frame:0 TX packets:12177 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:77233 (75.4 KiB) TX bytes:2127934 (2.0 MiB) The guest's /etc/network/interfaces, in this case running Ubuntu 12.04 (ip removed): # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 176.9.xx.xx netmask 255.255.255.248 gateway 176.9.xx.xx # Host IP pointopoint 176.9.xx.xx # Host IP dns-nameservers 8.8.8.8 8.8.4.4 The output of ifconfig -a on the guest: eth0 Link encap:Ethernet HWaddr 52:54:cd:83:eb:aa inet addr:176.9.xx.xx Bcast:0.0.0.0 Mask:255.255.255.255 inet6 addr: fe80::5054:cdff:fe83:ebaa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14190 errors:0 dropped:0 overruns:0 frame:0 TX packets:1768 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2614642 (2.6 MB) TX bytes:82700 (82.7 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:954 errors:0 dropped:0 overruns:0 frame:0 TX packets:954 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:176679 (176.6 KB) TX bytes:176679 (176.6 KB) Output of ping -c4 on the guest: PING google.nl (173.194.35.151) 56(84) bytes of data. 64 bytes from muc03s01-in-f23.1e100.net (173.194.35.151): icmp_req=1 ttl=55 time=14.7 ms From static.174.82.xx.xx.clients.your-server.de (176.9.xx.xx): icmp_seq=2 Redirect Host(New nexthop: static.161.82.9.176.clients.your-server.de (176.9.82.161)) 64 bytes from muc03s01-in-f23.1e100.net (173.194.35.151): icmp_req=2 ttl=55 time=15.1 ms From static.198.170.9.176.clients.your-server.de (176.9.170.198) icmp_seq=3 Destination Host Unreachable From static.198.170.9.176.clients.your-server.de (176.9.170.198) icmp_seq=4 Destination Host Unreachable --- google.nl ping statistics --- 4 packets transmitted, 2 received, +2 errors, 50% packet loss, time 3002ms rtt min/avg/max/mdev = 14.797/14.983/15.170/0.223 ms, pipe 2 The static.174.82.xx.xx.clients.your-server.de (176.9.xx.xx) is the host's IP. I have encountered this problem with every guest OS I've tried, that being Fedora, Ubuntu (server/desktop) and Debian with an upgraded kernel. I've also tried compiling the guest kernel myself, to no avail. I have no problem with recompiling a kernel, though the host cannot afford any downtime. Any ideas on this problem are very welcome. EDIT: I can ping the host from inside the guest.

  Read the article

< Previous Page | 45 46 47 48 49 50 51  | Next Page >