Search Results

Search found 4879 results on 196 pages for 'geeks'.

Page 49/196 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

• Installing a DHCP Service On Win2k8 ( Windows Server 2008 )

  - by Akshay Deep Lamba

  Introduction Dynamic Host Configuration Protocol (DHCP) is a core infrastructure service on any network that provides IP addressing and DNS server information to PC clients and any other device. DHCP is used so that you do not have to statically assign IP addresses to every device on your network and manage the issues that static IP addressing can create. More and more, DHCP is being expanded to fit into new network services like the Windows Health Service and Network Access Protection (NAP). However, before you can use it for more advanced services, you need to first install it and configure the basics. Let’s learn how to do that. Installing Windows Server 2008 DHCP Server Installing Windows Server 2008 DCHP Server is easy. DHCP Server is now a “role” of Windows Server 2008 – not a windows component as it was in the past. To do this, you will need a Windows Server 2008 system already installed and configured with a static IP address. You will need to know your network’s IP address range, the range of IP addresses you will want to hand out to your PC clients, your DNS server IP addresses, and your default gateway. Additionally, you will want to have a plan for all subnets involved, what scopes you will want to define, and what exclusions you will want to create. To start the DHCP installation process, you can click Add Roles from the Initial Configuration Tasks window or from Server Manager à Roles à Add Roles. Figure 1: Adding a new Role in Windows Server 2008 When the Add Roles Wizard comes up, you can click Next on that screen. Next, select that you want to add the DHCP Server Role, and click Next. Figure 2: Selecting the DHCP Server Role If you do not have a static IP address assigned on your server, you will get a warning that you should not install DHCP with a dynamic IP address. At this point, you will begin being prompted for IP network information, scope information, and DNS information. If you only want to install DHCP server with no configured scopes or settings, you can just click Next through these questions and proceed with the installation. On the other hand, you can optionally configure your DHCP Server during this part of the installation. In my case, I chose to take this opportunity to configure some basic IP settings and configure my first DHCP Scope. I was shown my network connection binding and asked to verify it, like this: Figure 3: Network connection binding What the wizard is asking is, “what interface do you want to provide DHCP services on?” I took the default and clicked Next. Next, I entered my Parent Domain, Primary DNS Server, and Alternate DNS Server (as you see below) and clicked Next. Figure 4: Entering domain and DNS information I opted NOT to use WINS on my network and I clicked Next. Then, I was promoted to configure a DHCP scope for the new DHCP Server. I have opted to configure an IP address range of 192.168.1.50-100 to cover the 25+ PC Clients on my local network. To do this, I clicked Add to add a new scope. As you see below, I named the Scope WBC-Local, configured the starting and ending IP addresses of 192.168.1.50-192.168.1.100, subnet mask of 255.255.255.0, default gateway of 192.168.1.1, type of subnet (wired), and activated the scope. Figure 5: Adding a new DHCP Scope Back in the Add Scope screen, I clicked Next to add the new scope (once the DHCP Server is installed). I chose to Disable DHCPv6 stateless mode for this server and clicked Next. Then, I confirmed my DHCP Installation Selections (on the screen below) and clicked Install. Figure 6: Confirm Installation Selections After only a few seconds, the DHCP Server was installed and I saw the window, below: Figure 7: Windows Server 2008 DHCP Server Installation succeeded I clicked Close to close the installer window, then moved on to how to manage my new DHCP Server. How to Manage your new Windows Server 2008 DHCP Server Like the installation, managing Windows Server 2008 DHCP Server is also easy. Back in my Windows Server 2008 Server Manager, under Roles, I clicked on the new DHCP Server entry. Figure 8: DHCP Server management in Server Manager While I cannot manage the DHCP Server scopes and clients from here, what I can do is to manage what events, services, and resources are related to the DHCP Server installation. Thus, this is a good place to go to check the status of the DHCP Server and what events have happened around it. However, to really configure the DHCP Server and see what clients have obtained IP addresses, I need to go to the DHCP Server MMC. To do this, I went to Start à Administrative Tools à DHCP Server, like this: Figure 9: Starting the DHCP Server MMC When expanded out, the MMC offers a lot of features. Here is what it looks like: Figure 10: The Windows Server 2008 DHCP Server MMC The DHCP Server MMC offers IPv4 & IPv6 DHCP Server info including all scopes, pools, leases, reservations, scope options, and server options. If I go into the address pool and the scope options, I can see that the configuration we made when we installed the DHCP Server did, indeed, work. The scope IP address range is there, and so are the DNS Server & default gateway. Figure 11: DHCP Server Address Pool Figure 12: DHCP Server Scope Options So how do we know that this really works if we do not test it? The answer is that we do not. Now, let’s test to make sure it works. How do we test our Windows Server 2008 DHCP Server? To test this, I have a Windows Vista PC Client on the same network segment as the Windows Server 2008 DHCP server. To be safe, I have no other devices on this network segment. I did an IPCONFIG /RELEASE then an IPCONFIG /RENEW and verified that I received an IP address from the new DHCP server, as you can see below: Figure 13: Vista client received IP address from new DHCP Server Also, I went to my Windows 2008 Server and verified that the new Vista client was listed as a client on the DHCP server. This did indeed check out, as you can see below: Figure 14: Win 2008 DHCP Server has the Vista client listed under Address Leases With that, I knew that I had a working configuration and we are done!

  Read the article

• MSDN Widget

  - by Harish Pavithran

  Just created a MSDN widget for my blog... http://geekswithblogs.net/harish/archive/2010/05/19/msdn-widget.aspx

  Read the article

• Where I Am Speaking Soon

  - by Tim Murphy

  Open XML and document generation has been my focus lately.  With that being the case I will be speaking on the subject in the near future at the following event. Chicago Code Camp – May 1 Chicago Architects Group – June 15 Lake Count .NET User Group – June 17 I hope to see you at one (or more) of these events. del.icio.us Tags: speaking,Office Open XML,OOXML,Document Generation

  Read the article

• Troubleshooting Microsoft Message Queuing Issues on Microsoft Lync Server 2010

  - by John Breakwell

  This blog post sounds specific but most of the troubleshooting tips can be applied to other scenarios: Troubleshooting Microsoft Message Queuing Issues on Microsoft Lync Server 2010 Microsoft Message Queuing (MSMQ) plays an important role in the Microsoft Lync Server 2010 Monitoring/Archiving server infrastructure: in a distributed network environment, MSMQ is used to transmit data from agents located on other servers (such as Front End Servers) to Monitoring/Archiving servers. The purpose of this article is to help you discover the root cause of any MSMQ problems that you might encounter, and to provide suggested ways to fix those problems. Microsoft Lync Server is the new name for Microsoft Office Communications Server. It’s good to see a major product make use of MSMQ – there aren’t many in the public eye (Symantec’s Enterprise Vault comes to mind).

  Read the article

• Free Book from Microsoft - Testing for Continuous Delivery with Visual Studio 2012

  - by TATWORTH

  Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/10/16/free-book-from-microsoft---testing-for-continuous-delivery-with.aspxAt  http://msdn.microsoft.com/en-us/library/jj159345.aspx, Microsoft have made available a free e-book - Testing for Continuous Delivery with Visual Studio 2012 "As more software projects adopt a continuous delivery cycle, testing threatens to be the bottleneck in the process. Agile development frequently revisits each part of the source code, but every change requires a re-test of the product. While the skills of the manual tester are vital, purely manual testing can't keep up. Visual Studio 2012 provides many features that remove roadblocks in the testing and debugging process and also help speed up and automate re-testing."

  Read the article

• OWA for ios devices

  - by marc dekeyser

  Originally posted on: http://geekswithblogs.net/marcde/archive/2013/07/23/owa-for-ios-devices.aspxI was in the presentation launch of the OWA for ios devices and boy, does that look exciting! We now feature a full app for Office 365 supporting OWA offline and many more options. Support for Exchange 2013 on premise deployments is not there yet but is planned to come soon (when it's ready!)"Our goal is to help our customers remain productive anytime, anywhere.  This includes providing a great email experience on smartphones and tablets.  Windows Phone 8 comes with a top-notch native email client in Outlook Mobile, and we offer Exchange ActiveSync (EAS), which is the de-facto industry standard for accessing Exchange email on mobile devices.  In order to better support many of our customers who use their iPhones and iPads for work, we are introducing OWA for iPhone and OWA for iPad, which bring a native Outlook Web App experience to iOS devices!"Read more: http://blogs.office.com/b/office365tech/archive/2013/07/16/owa-for-iphone-and-owa-for-ipad.aspx

  Read the article

• Annoying security "feature" in Windows 2008 R2 burns me, but not DVD's

  - by Stan Spotts

  This stuff drives me nuts. I'm all for hardening servers, and reducing security footprints, but I always want the option to allow me to get work done versus securing my system. I use Windows Server 2008 R2 as my laptop OS for a number of reasons I don't need to review here. It's pimped out to work like Windows 7 for most things. But my DVD writer is crippled, and evidently it's on purpose: http://blogs.technet.com/askcore/archive/2010/02/19/windows-server-2008-r2-no-recording-tab-for-cd-dvd-burner.aspx I don't WANT to log in as the local administrator to burn a damned DVD.  WTF isn't this configurable through the registry, or better yet, group policy? There are no security settings that I should not have the option to enable or disable.

  Read the article

• List of Commonly Used Value Types in XNA Games

  - by Michael B. McLaughlin

  Most XNA programmers are concerned about generating garbage. More specifically about allocating GC-managed memory (GC stands for “garbage collector” and is both the name of the class that provides access to the garbage collector and an acronym for the garbage collector (as a concept) itself). Two of the major target platforms for XNA (Windows Phone 7 and Xbox 360) use variants of the .NET Compact Framework. On both variants, the GC runs under various circumstances (Windows Phone 7 and Xbox 360). Of concern to XNA programmers is the fact that it runs automatically after a fixed amount of GC-managed memory has been allocated (currently 1MB on both systems). Many beginning XNA programmers are unaware of what constitutes GC-managed memory, though. So here’s a quick overview. In .NET, there are two different “types” of types: value types and reference types. Only reference types are managed by the garbage collector. Value types are not managed by the garbage collector and are instead managed in other ways that are implementation dependent. For purposes of XNA programming, the important point is that they are not managed by the GC and thus do not, by themselves, increment that internal 1 MB allocation counter. (n.b. Structs are value types. If you have a struct that has a reference type as a member, then that reference type, when instantiated, will still be allocated in the GC-managed memory and will thus count against the 1 MB allocation counter. Putting it in a struct doesn’t change the fact that it gets allocated on the GC heap, but the struct itself is created outside of the GC’s purview). Both value types and reference types use the keyword ‘new’ to allocate a new instance of them. Sometimes this keyword is hidden by a method which creates new instances for you, e.g. XmlReader.Create. But the important thing to determine is whether or not you are dealing with a value types or a reference type. If it’s a value type, you can use the ‘new’ keyword to allocate new instances of that type without incrementing the GC allocation counter (except as above where it’s a struct with a reference type in it that is allocated by the constructor, but there are no .NET Framework or XNA Framework value types that do this so it would have to be a struct you created or that was in some third-party library you were using for that to even become an issue). The following is a list of most all of value types you are likely to use in a generic XNA game: AudioCategory (used with XACT; not available on WP7) AvatarExpression (Xbox 360 only, but exposed on Windows to ease Xbox development) bool BoundingBox BoundingSphere byte char Color DateTime decimal double any enum (System.Enum itself is a class, but all enums are value types such that there are no GC allocations for enums) float GamePadButtons GamePadCapabilities GamePadDPad GamePadState GamePadThumbSticks GamePadTriggers GestureSample int IntPtr (rarely but occasionally used in XNA) KeyboardState long Matrix MouseState nullable structs (anytime you see, e.g. int? something, that ‘?’ denotes a nullable struct, also called a nullable type) Plane Point Quaternion Ray Rectangle RenderTargetBinding sbyte (though I’ve never seen it used since most people would just use a short) short TimeSpan TouchCollection TouchLocation TouchPanelCapabilities uint ulong ushort Vector2 Vector3 Vector4 VertexBufferBinding VertexElement VertexPositionColor VertexPositionColorTexture VertexPositionNormalTexture VertexPositionTexture Viewport So there you have it. That’s not quite a complete list, mind you. For example: There are various structs in the .NET framework you might make use of. I left out everything from the Microsoft.Xna.Framework.Graphics.PackedVector namespace, since everything in there ventures into the realm of advanced XNA programming anyway (n.b. every single instantiable thing in that namespace is a struct and thus a value type; there are also two interfaces but interfaces cannot be instantiated at all and thus don’t figure in to this discussion). There are so many enums you’re likely to use (PlayerIndex, SpriteSortMode, SpriteEffects, SurfaceFormat, etc.) that including them would’ve flooded the list and reduced its utility. So I went with “any enum” and trust that you can figure out what the enums are (and it’s rare to use ‘new’ with an enum anyway). That list also doesn’t include any of the pre-defined static instances of some of the classes (e.g. BlendState.AlphaBlend, BlendState.Opaque, etc.) which are already allocated such that using them doesn’t cause any new allocations and therefore doesn’t increase that 1 MB counter. That list also has a few misleading things. VertexElement, VertexPositionColor, and all the other vertex types are structs. But you’re only likely to ever use them as an array (for use with VertexBuffer or DynamicVertexBuffer), and all arrays are reference types (even arrays of value types such as VertexPositionColor[ ] or int[ ]). * So that’s it for now. The note below may be a bit confusing (it deals with how the GC works and how arrays are managed in .NET). If so, you can probably safely ignore it for now but feel free to ask any questions regardless. * Arrays of value types (where the value type doesn’t contain any reference type members) are much faster for the GC to examine than arrays of reference types, so there is a definite benefit to using arrays of value types where it makes sense. But creating arrays of value types does cause the GC’s allocation counter to increase. Indeed, allocating a large array of a value type is one of the quickest ways to increment the allocation counter since a .NET array is a sequential block of memory. An array of reference types is just a sequential block of references (typically 4 bytes each) while an array of value types is a sequential block of instances of that type. So for an array of Vector3s it would be 12 bytes each since each float is 4 bytes and there are 3 in a Vector3; for an array of VertexPositionNormalTexture structs it would typically be 32 bytes each since it has two Vector3s and a Vector2. (Note that there are a few additional bytes taken up in the creation of an array, typically 12 but sometimes 16 or possibly even more, which depend on the implementation details of the array type on the particular platform the code is running on).

  Read the article

• BizTalk 2009 - The Community ODBC Adapter: Installation

  - by Stuart Brierley

  I have previsouly detailed the installation of MySQL, the configuration of MySQL and the installation of the ODBC Data Connector for MySQL.  The reason I needed to install and configure these servers was to provide a test environment for a BizTalk Server 2009 solution I am working on where BizTalk will be querying and populating a MySQL database. To do this I then needed to install and add the Community ODBC adapter from Two Connect: "The Community BizTalk Adapter for ODBC is based on the code that was first made available on GotDotNet a few years ago. TwoConnect has refreshed this code, added an installer, and tested it against the latest BizTalk editions. We are releasing the updates back to the BizTalk developer, user and partner community as part of our ongoing community intitiatives. This is the second adapter package that TwoConnect makes available to the community after the very succesful release of the BizTalk WSE 3 adapter a couple of years ago. This adapter is useful in all ODBC based integration scenarios. The following are the new features added and fixes made to the old code base on GotDotNet." Detailed below are the installation instructions for this adapter.  Downloading and running the installer will load up the splash screen. Next you need to select the installation location for the adapter. You then need to confirm the installation following which you will be shown the installation progress. Assuming all has gone well you should see the installation complete screen. Once the installation has completed successfully you will then need to add the adapter to your BizTalk Server.  To do this open the BizTalk Administration console, expand the Platform Settings and right click on Adapters then select New\Adapter. You should then be able to select the ODBC adapter and choose the display name for the adapter. This adapter will then be shown in the BizTalk Administration console. Next I will be looking at using the ODBC Adapter when: Generating schemas Creating a receive port Creating a send port

  Read the article

• Converting Creole to HTML, PDF, DOCX, ..

  - by Marko Apfel

  Challenge We documented a project on Github with the Wiki there. For most articles we used Creole as markup language. Now we have to deliver a lot of the content to our client in an usual format like PDF or DOCX. So we need a automatism to extract all relevant content, merge it together and convert the stuff to a new format. Problem One of the most popular toolsets to convert between several formats is Pandoc. But unfortunally Pandoc does not support Creole (see the converting matrix). Approach So we need an intermediate step: Converting from Creole to a supported Pandoc format. Creolo/c is a Creole to Html converter and does exactly what we need. After converting our Creole content to Html we could use Pandoc for all the subsequent tasks. Solution Getting the Creole stuff First at all we need the Creole content on our locale machines. This is easy. Because the Github Wiki themselves is a Git repository we could clone it to our machine. In the working copy we see now all the files and the suffix gives us the hint for the markup language. Converting and Merging Creole content to Html Because we would like all content from several Creole files in one HTML file, we have to convert and merge all the input files to one output file. Creole/c has an option (-b) to generate only the Html-stuff below a Html <Body>-tag. And this is hook for us to start. We have to create manually the additional preluding Html-tags (<html>, <head>, ..), then we merge all needed Creole content to our output file and last we add the closing tags. This could be done straightforward with a little bit old DOS magic: REM === Generate the intro tags === ECHO ^<html^> > %TMP%\output.html ECHO ^<head^> >> %TMP%\output.html ECHO ^<meta name="generator" content="creole/c"^> >> %TMP%\output.html ECHO ^</head^> >> %TMP%\output.html ECHO ^<body^> >> %TMP%\output.html REM === Mix in all interesting Creole stuff with creole/c === .\Creole-C\bin\creole.exe -b .\..\datamodel+overview.creole >> %TMP%\output.html .\Creole-C\bin\creole.exe -b .\..\datamodel+domain+CvdCaptureMode.creole >> %TMP%\output.html .\Creole-C\bin\creole.exe -b .\..\datamodel+domain+CvdDamageReducingActivity.creole >> %TMP%\output.html .\Creole-C\bin\creole.exe -b .\..\datamodel+lookup+IncidentDamageCodes.creole >> %TMP%\output.html .\Creole-C\bin\creole.exe -b .\..\datamodel+table+Attachments.creole >> %TMP%\output.html .\Creole-C\bin\creole.exe -b .\..\datamodel+table+TrafficLights.creole >> %TMP%\output.html REM === Generate the outro tags === ECHO ^</body^> >> %TMP%\output.html ECHO ^</html^> >> %TMP%\output.html REM === Convert the Html file to Docx with Pandoc === .\Pandoc\bin\pandoc.exe -o .\Database-Schema.docx %TMP%\output.html Some explanation for this The first ECHO call creates the file. Therefore the beginning <html> tag is send via > to a temporary working file. All following calls add content to the existing file via >>. The tag-characters < and > must be escaped. This is done by the caret sign (^). We use a file in the default temporary folder (%TMP%) to avoid writing in our current folders. (better for continuous integration) Both toolsets (Creole/c and Pandoc) are copied to a versioned tools folder in the Wiki. This is committable and no problem after pushing – Github does not do anything with it. In this folder is also the batch (Export-Docx.bat) for all the steps. Pandoc recognizes the conversion by the suffixes of the file names. So it is enough to specify only the input and output files.

  Read the article

• Silverlight Cream for June 06, 2010 -- #876

  - by Dave Campbell

  In this Issue: Brian Genisio, Michael Washington, Fons Sonnemans , Don Burnett, Xianzhong Zhu, Mike Snow, Jesse Liberty, Victor Gaudioso, David Kelley(-2-), and Matias Bonaventura . Shoutout: Anoop has a good post up: MEF or Managed Extensibility Framework and Lazy – Being Lazy with MEF, Custom Export Attributes etc Jesse Liberty's got a good post up if you are just Getting Started With Silverlight: A Path Through The Learning Material John Papa reports Updates and New Home for Sticky Plugin Tim Heuer announced Silverlight 4 Theme refresh including RIA Services templates From SilverlightCream.com: Adventures in MVVM – ViewModel Location and Creation Brian Genisio has a post up about ViewModels and how he attaches them to his views. Some discssion of MVVMLight, and other external links plus the code for the project. Simplified MEF: Dynamically Loading a Silverlight .xap Michael Washington has a good tutorial up on MEF, Silverlight, and ViewModel. In Michael's words: The goal here is to give you a quick easy win. You will be able to understand this one. You will come away with something you can use, and you will be able to tell your fellow colleagues, "MEF? yeah I'm using that, good stuff Touch Gesture Triggers for Windows Phone 7 projects in Blend 4.0 Fons Sonnemans has a post up about touch gestures for WP7 -- he's got 3 of them implemented using triggers, plus an external link to another, and the source. What the Heck is “MEF” for, and what Silverlight designers need to know about it? Don Burnett is also talking MEF... he does a good job of introducing MEF if you're not acquainted yet, plus some external information. Write Your Custom Effect Components in Silverlight 3 Xianzhong Zhu has a post up walking you through creating your own Custom Effect for Blend and Silverlight 3 ... lots of external links and the source project. Silverlight Tip of the Day #28 – Text Trimming Mike Snow's Tip #28 is about Text Trimming... what it does, and how it differs from WPF Windows Phone 7: Lists, Page Animation and oData Jesse Liberty called this a mini-tutorial, but it's not so mini... great tutorial on WP7, data, lists, and page transitions... oh, and the data is OData too... New Silveright Video Tutorial: How to Do Hit Detection Victor Gaudioso's latest video tutorial is up and he's demonstrating how to do Silverlight HitTesting via code from Andy Beaulieu Dependency Properties Made Easy Need a quick pick-up on Dependency Properties? David Kelley has a short post about them on his blog. Isolated Storage Made Easy David Kelley also has a quick post up about Isolated Storage ... going to keep an eye out for more of these quick "Made Easy" posts from David. Prism 4.0 First Drop – MVVM Matias Bonaventura has a post up about the recent Prism 4.0 drop and highlights a bunch of the features/enhancements in this... some code snippets and a linnk out to the CodePlex drop. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Cannot set a credential for principal 'sa'

  - by hailey

  I was trying to change the SA password on my development server this morning and got an error. Msg 15535, Level 16, State 1, Line 1 Cannot set a credential for principal 'sa'. It was a little frustrating to get an error for a seemingly simple task but then agian maybe I screwed something up.  After doing a couple of searches i found a Microsoft KB (support.microsoft.com/kb/956177) "You receive an exception in SQL Server 2008 when you try to modify the properties of the SQL Server Administrator account by using SQL Server Management Studio".  It was for SQL 2008 but it worked for my SQL 2005 sp3 server just fine.  You have to click the Map to Credential check box but you don't have to add any credetials just click the OK button to complete and that's it.

  Read the article

• Who broke the build?

  - by Martin Hinshelwood

  I recently sent round a list of broken builds at SSW and asked for them to be fixed or deleted if they are not being used. My colleague Peter came back with a couple of questions which I love as it tells me that at least one person reads my email I think first we need to answer a couple of other questions related to builds in general.   Why do we want the build to pass? Any developer can pick up a project and build it Standards can be enforced Constant quality is maintained Problems in code are identified early What could a failed build signify? Developers have not built and tested their code properly before checking in. Something added depends on a local resource that is not under version control or does not exist on the target computer. Developers are not writing tests to cover common problems. There are not enough tests to cover problems. Now we know why, lets answer Peters questions: Where is this list? (can we see it somehow) You can normally only see the builds listed for each project. But, you have a little application called “Build Notifications” on your computer. It is installed when you install Visual Studio 2010. Figure: Staring the build notification application on Windows 7. Once you have it open (it may disappear into your system tray) you should click “Options” and select all the projects you are involved in. This application only lists projects that have builds, so don’t worry if it is not listed. This just means you are about to setup a build, right? I just selected ALL projects that have builds. Figure: All builds are listed here In addition to seeing the list you will also get toast notification of build failure’s. How can we get more info on what broke the build? (who is interesting too, to point the finger but more important is what) The only thing worse than breaking the build, is continuing to develop on a broken build! Figure: I have highlighted the users who either are bad for braking the build, or very bad for not fixing it. To find out what is wrong with a build you need to open the build definition. You can open a web version by double clicking the build in the image above, or you can open it from “Team Explorer”. Just connect to your project and open out the “Builds” tree. Then Open the build by double clicking on it. Figure: Opening a build is easy, but double click it and then open a build run from the list. Figure: Good example, the build and tests have passed Figure: Bad example, there are 133 errors preventing POK from being built on the build server. For identifying failures see: Solution: Getting Silverlight to build on Team Build 2010 RC Solution: Testing Web Services with MSTest on Team Build Finding the problem on a partially succeeded build So, Peter asked about blame, let’s have a look and see: Figure: The build has been broken for so long I have no idea when it was broken, but everyone on this list is to blame (I am there too) The rest of the history is lost in the sands of time, there is no way to tell when the build was originally broken, or by whom, or even if it ever worked in the first place. Build should be protected by the team that uses them and the only way to do that is to have them own them. It is fine for me to go in and setup a build, but the ownership for a build should always reside with the person who broke it last. Conclusion This is an example of a pointless build. Lets be honest, if you have a system like TFS in place and builds are constantly left broken, or not added to projects then your developers don’t yet understand the value. I have found that adding a Gated Check-in helps instil that understanding of value. If you prevent them from checking in without passing that basic quality gate of “your code builds on another computer” then it makes them look more closely at why they can’t check-in. I have had builds fail because one developer had a “d” drive, but the build server did not. That is what they are there to catch.   If you want to know what builds to create and why I wrote a post on “Do you know the minimum builds to create on any branch?”   Technorati Tags: TFS2010,Gated Check-in,Builds,Build Failure,Broken Build

  Read the article

• No endpoint listening at.........

  - by Michael Stephenson

  I was having some very frustrating behaviour on our build server and while I found a number of articles online with similar error messages none of them helped me.  I thought I would just explain this here incase if helps me or anyone else in future.The error message we were getting is:There was no endpoint listening at http://localhostStubs.ExternalApplication/SampleService.svc that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more detailsOur scenario is as follows:We have a solution where a WCF service application hosting the WCF routing service is listening to the Windows Azure Service Bus Relay.  We have an acceptance test project in the solution which sends a message to the service bus which is then received by the WCF routing service and routed to SampleService.svc which is hosted in another IIS application on the same box.  A response is flowed back through to the test.  In the tests there are 5 scenarios simulating a successful message, and various error conditions.  On my developer machine it was working absolutely fine every time, and a clean build on my developer machine worked fine.  On the build server however one or more of the tests would fail each time with the above error message.  There didnt seem to be any pattern to which test would fail.The solution was building on a Windows 2008 R2 machine with IIS 7 and AppFabric Server installed with auto-start configured for the IIS Application which would be listening to service bus.After lots of searching online and looking at logs etc it turned out to be a simple solution to just restart the WAS service (Windows Process Activation Service) and the services it advised you to restart with it.  Hope this helps someone else

  Read the article

• Create Orchard Module in a Separate Project

  - by Steve Michelotti

  The Orchard Project is a new OOS Microsoft project that is being developed up on CodePlex. From the Orchard home page on CodePlex, it states “Orchard project is focused on delivering a .NET-based CMS application that will allow users to rapidly create content-driven Websites, and an extensibility framework that will allow developers and customizers to provide additional functionality through modules and themes.” The Orchard Project site contains additional information including documentation and walkthroughs. The ability to create a composite solution based on a collection of modules is a compelling feature. In Orchard, these modules can just be created as simple MVC Areas or they can also be created inside of stand-alone web application projects.  The walkthrough for writing an Orchard module that is available on the Orchard site uses a simple Area that is created inside of the host application. It is based on the Orchard MIX presentation. This walkthrough does an effective job introducing various Orchard concepts such as hooking into the navigation system, theme/layout system, content types, and more.  However, creating an Orchard module in a separate project does not seem to be concisely documented anywhere. Orchard ships with several module OOTB that are in separate assemblies – but again, it’s not well documented how to get started building one from scratch. The following are the steps I took to successfully get an Orchard module in a separate project up and running. Step 1 – Download the OrchardIIS.zip file from the Orchard Release page. Unzip and open up the solution. Step 2 – Add your project to the solution. I named my project “Orchard.Widget” and used and “MVC 2 Empty Web Application” project type. Make sure you put the physical path inside the “Modules” sub-folder to the main project like this: At this point the solution should look like: Step 3 – Add assembly references to Orchard.dll and Orchard.Core.dll. Step 4 – Add a controller and view.  I’ll just create a Hello World controller and view. Notice I created the view as a partial view (*.ascx). Also add the [Themed] attribute to the top of the HomeController class just like the normal Orchard walk through shows it. Step 5 – Add Module.txt to the project root. The is a very important step. Orchard will not recognize your module without this text file present.  It can contain just the name of your module: name: Widget Step 6 – Add Routes.cs. Notice I’ve given an area name of “Orchard.Widget” on lines 26 and 33. 1: using System; 2: using System.Collections.Generic; 3: using System.Web.Mvc; 4: using System.Web.Routing; 5: using Orchard.Mvc.Routes; 6:   7: namespace Orchard.Widget 8: { 9: public class Routes : IRouteProvider 10: { 11: public void GetRoutes(ICollection<RouteDescriptor> routes) 12: { 13: foreach (var routeDescriptor in GetRoutes()) 14: { 15: routes.Add(routeDescriptor); 16: } 17: } 18:   19: public IEnumerable<RouteDescriptor> GetRoutes() 20: { 21: return new[] { 22: new RouteDescriptor { 23: Route = new Route( 24: "Widget/{controller}/{action}/{id}", 25: new RouteValueDictionary { 26: {"area", "Orchard.Widget"}, 27: {"controller", "Home"}, 28: {"action", "Index"}, 29: {"id", ""} 30: }, 31: new RouteValueDictionary(), 32: new RouteValueDictionary { 33: {"area", "Orchard.Widget"} 34: }, 35: new MvcRouteHandler()) 36: } 37: }; 38: } 39: } 40: } Step 7 – Add MainMenu.cs. This will make sure that an item appears in the main menu called “Widget” which points to the module. 1: using System; 2: using Orchard.UI.Navigation; 3:   4: namespace Orchard.Widget 5: { 6: public class MainMenu : INavigationProvider 7: { 8: public void GetNavigation(NavigationBuilder builder) 9: { 10: builder.Add(menu => menu.Add("Widget", item => item.Action("Index", "Home", new 11: { 12: area = "Orchard.Widget" 13: }))); 14: } 15:   16: public string MenuName 17: { 18: get { return "main"; } 19: } 20: } 21: } Step 8 – Clean up web.config. By default Visual Studio adds numerous sections to the web.config. The sections that can be removed are: appSettings, connectionStrings, authentication, membership, profile, and roleManager. Step 9 – Delete Global.asax. This project will ultimately be running from inside the Orchard host so this “sub-site” should not have its own Global.asax.   Now you’re ready the run the app.  When you first run it, the “Widget” menu item will appear in the main menu because of the MainMenu.cs file we added: We can then click the “Widget” link in the main menu to send us over to our view:   Packaging From start to finish, it’s a relatively painless experience but it could be better. For example, a Visual Studio project template that encapsulates aspects from this blog post would definitely make it a lot easier to get up and running with creating an Orchard module.  Another aspect I found interesting is that if you read the first paragraph of the walkthrough, it says, “You can also develop modules as separate projects, to be packaged and shared with other users of Orchard CMS (the packaging story is still to be defined, along with marketplaces for sharing modules).” In particular, I will be extremely curious to see how the “packaging story” evolves. The first thing that comes to mind for me is: what if we explored MvcContrib Portable Areas as a potential mechanism for this packaging? This would certainly make things easy since all artifacts (aspx, aspx, images, css, javascript) are all wrapped up into a single assembly. Granted, Orchard does have its own infrastructure for layouts and themes but it seems like integrating portable areas into this pipeline would not be a difficult undertaking. Maybe that’ll be the next research task. :)

  Read the article

• Temporarily disabling foreign key constraints in SQL Server

  - by Renso

  Originally posted on: http://geekswithblogs.net/renso/archive/2013/06/24/temporarily-disabling-foreign-key-constraints-in-sql-server.aspxGoal: Is to temporarily disable all foreign key constraint and later enable the Constraint again?Solutions-- Disable all the constraint in databaseEXEC sp_msforeachtable "ALTER TABLE ? NOCHECK CONSTRAINT all"-- Enable all the constraint in databaseEXEC sp_msforeachtable "ALTER TABLE ? WITH CHECK CHECK CONSTRAINT all"

  Read the article

• BizTalk - Removing BAM Activities and Views using bm.exe

  - by Stuart Brierley

  Originally posted on: http://geekswithblogs.net/StuartBrierley/archive/2013/10/16/biztalk---removing-bam-activities-and-views-using-bm.exe.aspxOn the project I am currently working on, we are making quite extensive use of BAM within our growing number of BizTalk applications, all of which are being deployed and undeployed using the excellent Deployment Framework for BizTalk 5.0.Recently I had an issue where problems on the build server had left the target development servers in a state where the BAM activities and views for a particular application were not being removed by the undeploy process and unfortunately the definition in the solution had changed meaning that I could not easily recreate the file from source control.  To get around this I used the bm.exe application from the command line to manually remove the problem BAM artifacts - bm.exe can be found at the following path:C:\Program Files (x86)\Microsoft BizTalk Server 2010\TrackingC:\Program Files (x86)\Microsoft BizTalk Server 2010\TrackingStep1 :Get the BAM Definition FileRun the following command to get the BAm definition file, containing the details of all the activities, views and alerts:bm.exe get-defxml -FileName:{Path and File Name Here}.xmlStep 2: Remove the BAM ArtifactsAt this stage I chose to manually remove each of my problem BAM activities and views using seperate command line calls.  By looking in the definition file I could see the names of the activities and views that I wanted to remove and then use the following commands to remove first the views and then the activities:bm.exe remove-view -name:{viewname}bm.exe remove-activity -name:{activityname}

  Read the article

• How to migrate ASP.NET MVC 3 , MVC4 project to ASP.NET MVC5 ?

  - by Anirudha

  Originally posted on: http://geekswithblogs.net/anirugu/archive/2013/10/16/how-to-migrate-asp.net-mvc-3--mvc4-project-to.aspxSoon you will see a new version of MVC5 in VS2013. MVC5 will be incorporated in VS2013. MVC3 will not be supported in VS2013. I confirmed it on channel9 last time. So People who have installed only VS2013 or doesn’t have old version will be got trouble with the project that is still in MVC3. This error happen because MVC4 and 5 installation doesn’t contain the DLL that is used in Version 3 of ASP.NET MVC.   Don’t be panic. You guys want to upgrade your project. Here is a trick  to solve the issue.   When you open the project you have seen that in Reference there is some dll that have yellow icon. This means that dll are missing or not found in your configuration or system.   Now remember that dll name. Remove them from reference and add them from adding reference. I telling you to remove so VS will not prevent you to add new version of same assembly. Add all those assembly. Those dll will be following : System.Web.Mvc Razor and Webpages Dll.   Remember that in MVC3 we use old version of these assembly. Now When you done by adding all assembly then now open web.config.   There is 2 web.config file in our mvc project.  One is in root folder and second in Views folder. You need to update all those version no. This is not a big deal if you know the name of assembly. Now if you web.config show you assembly version as 3.000.00 then 3 would be replaced with 4 or 5 according to version no. Same thing need to applied all dll for both web.config.   Note :- In VS Template Views goes in ~/Views folder but if someone use any other folder then Views for views and those folder have also web.config then remember to update them also. Your project will be compile and make no warning and error but that certainly not work. for examples areas/views and themes/views that contain web.config also need to be updated with newer assembly version no.   After done these thing you can compile your project and it will be work as it should be Thanks for read my post. Follow me on FB and Twitter to stay updated

  Read the article

• It&rsquo;s About You: Tell Microsoft How They&rsquo;re Doing!

  - by juanlarios

  Every fall and spring, a survey goes out to a few hundred thousand IT folk in Canada asking what they think of Microsoft as a company. The information they get from this survey helps them understand what problems and issues you’re facing and how they can do better. The team at Microsoft Canada takes the input they get from this survey very seriously. Now I don’t know who of you will get the survey and who won’t but if you do find an email in your inbox from "Microsoft Feedback” with an email address of “ [email protected] ” and a subject line “Help Microsoft Focus on Customers and Partners” from now until April 13th — it’s not a hoax or phishing email. Please open it and take a few minutes to tell them what you think. This is your chance to get your voice heard: If they’re doing well, feel free to pile on the kudos (they love positive feedback!) and if you see areas they can improve, please point them out so they can make adjustments (they also love constructive criticism!). The Microsoft team would like to thank you for all your feedback in the past — to those of you who have filled out the survey and sent them emails. Thank you to all who engage with them in so many different ways through events, the blogs, online and in person. You are why they do what they do and they feel lucky to work with such a great community! One last thing - even if you don’t get the survey you can always give the team feedback by emailing us directly through the Microsoft Canada IT Pro Feedback email address . They want to make sure they are serving you in the best possible way. Tell them what you want more of. What should they do less of or stop altogether? How can they help? Do you want more cowbell ? Let them know through the survey or the email alias. They love hearing from you!

  Read the article

• Killer content for my Kindle - The Economist with no need for an iPad - yipeee!

  - by Liam Westley

  I admin it, I was jealous of someone's iPad. They were reading The Economist, for free, as they were a print subscriber. I'm a print subscriber too. However, I don't have an iPad or an iPhone, just an Android phone and a Kindle. As soon as I got the Kindle, I looked up how to get The Economist on it. £9.99 per month. Hmmm, twice as much again as a my print subscription and I wanted to maintain the print subscription. No way Amazon. Fortunately some nice person wrote similar comments on The Economist subscription for Kindle, but added a very important additional nugget of information; and there is no need, as a print subscriber you can just use the free Calibre e-book creation tool anyway. So I downloaded it, searched for The Economist online 'recipe', entered my login name and password (part of my print subscription) and off went Calibre to screen scrape every single article from the Christmas 2010 issue into a .mobi file, complete with front cover image and full indexing. It's wonderful. Truely wonderful. Every section individually indexed, with each article separated and all inline images preserved. It even feels wonderfully retro, back to the days when The Economist only used black and white images. So many thanks the guys behind Calibre and The Economist recipe creators. Finally, I have my essential Kindle content that I've been waiting for.

  Read the article

• March 2011 Chicago IT Arch Group Recap

  - by Tim Murphy

  This month’s meeting was outstanding.  We had a record turnout for John Sprunger’s presentation on mobile architectures.  I guess that is what happens when you put up a presentation on the most popular topic in technology.  I invite everyone to join us for next month’s event.   And while I love to see new faces it is always great to have people come back and continue the conversation. Here are some resources from last night’s presentation. Presentation slides Whitepaper Case study Stay tuned for information on our upcoming presentations.   del.icio.us Tags: CITAG,Chicago Information Technology Architects Group,Mobile Architecture

  Read the article

• Microsoft Press Deal of the Day - 9/Jul/2012 - Windows® Communication Foundation 4 Step by Step

  - by TATWORTH

  Today's Deal of the Day from Microsoft Press at http://shop.oreilly.com/product/0790145302403.do?code=MSDEAL is Windows® Communication Foundation 4 Step by Step"Teach yourself the essentials of Windows Communication Foundation (WCF) 4 -- one step at a time. With this practical, learn-by-doing tutorial, you get the clear guidance and hands-on examples you need to begin creating Web services for robust Windows-based business applications. Discover how to: Build and host SOAP and REST servicesMaintain service contracts and data contractsControl configuration and communications programmaticallyImplement message encryption, authentication, and authorizationManage identity with Windows CardSpaceBegin working with Windows Workflow Foundation to create scalable and durable business servicesImplement service discovery and message routingOptimize performance with service throttling, encoding, and streamingIntegrate WCF services with ASP.NET clients and enterprise services components"  Note the comment:Use code: MSDEAL

  Read the article

• Silverlight Cream for May 06, 2010 -- #857

  - by Dave Campbell

  In this Issue: Alan Beasley, Josh Twist, Mike Snow(-2-, -3-), John Papa(-2-), David Kelley, and David Anson(-2-). Shoutout: John Papa posted a question: Do You Want be on Silverlight TV? From SilverlightCream.com: ListBox Styling (Part 3 - Additional Templates) in Expression Blend & Silverlight Alan Beasley has part 3 of his ListBox styling tutorial in Expression Blend up... another great tutorial and all the code. Securing Your Silverlight Applications Josh Twist has a nice long post up on Securing your Silverlight apps... definitions, services, various forms of authentication. Silverlight Tip of the Day #13 – Silverlight Mobile Development Mike Snow has Tip of the Day #13 up and is discussing creating Silverlight apps for WP7. Silverlight Tip of the Day #14 – Dynamically Loading a Control from a DLL on a Server Mike Snow's Tip #14 is step-by-step instructions for loading a UserControl from a DLL. Silverlight Tip of the Day #15 – Setting Default Browse in Visual Studio Mike Snow's Tip #15 is actually a Visual Studio tip -- how to set what browser your Silverlight app will launch in. Silverlight TV 24: eBay’s Silverlight 4 Simple Lister Application Here we are with Silverlight TV Thursday again! ... John Papa is interviewing Dave Wolf talking about the eBay Simple Lister app. Digitally Signing a XAP Silverlight John Papa has a post up about Digitally signing a Silverlight XAP. He actually is posting an excerpt from the Silverlight 4 Whitepaper he posted... and he has a link to the Whitepaper so we can all read the whole thing too! Hacking Silverlight Code Browser David Kelley has a very cool code browser up to keep track of all the snippets he uses... and we can too... this is a tremendous resource... thanks David! Simple workarounds for a visual problem when toggling a ContextMenu MenuItem's IsEnabled property directly David Anson dug into a ContextMenu problem reported by a couple readers and found a way to duplicate the problem plus a workaround while you're waiting for the next Toolkit drop. Upgraded my Windows Phone 7 Charting example to go with the April Developer Tools Refresh David Anson also has a post up describing his path from the previous WP7 code to the current upgrading his charting code. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• BDD (Behavior-Driven Development) tools for .Net

  - by tikrimi

  For several years, I use TDD (Test-Driven Development) to produce code. I no longer plans to work without using TDD. The use of TDD significantly increases code quality, but does not guarantee that the code is the code that corresponds to the requirements specifications (write the "right code" with BDD as opposed to the write "code right" with BDD). Dan North has described in an article in published in 2006 the foundations of the BDD (Behavior-Driven Development). In this article, he introduces the formalism "When Given Then". This formalism is used in all tools dedicated to BDD. This is a short list of open source BDD tools that you can use with .Net : SpecFlow: Here you can find an article in MSDN Magazine and 2 webcasts (http://channel9.msdn.com/posts/ASPNET-MVC-With-Community-Tools-Part-2-Spec-Flow-and-WatiN and http://channel9.msdn.com/posts/ASPNET-MVC-With-Community-Tools-Part-3-More-Spec-Flow-and-WatiN) published on Chanel9. NSpec: This is certainly the most used project. There are many examples on the web. StoryQ: This project is hosted on Codeplex. This small project is very simple to implement and very useful.

  Read the article

• OCS 2007 R2 User Properties Error Message

  - by BWCA

  When I attempted to configure one of our user’s Meeting settings using the Microsoft Office Communications Server 2007 R2 Administration Tool   I received an Validation failed – Validation failed with HRESULT = 0XC3EC7E02 dialog box error message. I received the same error message when I tried to configure the user’s Telephony and Other settings. Using ADSI Edit, I compared the settings of an user that I had no problems configuring and the user that I had problems configuring.  For the user I had problems configuring, I noticed a trailing space after the last phone number digit for the user’s msRTCSIP-Line attribute. After I removed the trailing space for the attribute and waited for Active Directory replication to complete, I was able to configure the user’s Meeting settings (and Telephony/Other settings) without any problems. If you get the error message, check your user’s msRTCSIP-xxxxx attributes in Active Directory using ADSI Edit for any trailing spaces, typos, or any other mistakes.

  Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >