Search Results

Search found 1882 results on 76 pages for 'gnu'.

Page 49/76 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

• Ubuntu 13.10 installer making no changes to partition, even after complete

  - by dragonhart6505

  Trying to install Ubuntu 13.10 (x64 package) on a HP Probook 4430S from USB made with UnetBootin. Intel Celeron B810 Dual-core x64 1.6ghz 4gb Ram Intel Graphics HD 2000 320GB HDD - 3 partitions (1 with backup files - 40gb, 2 Win7 that were dual-boot but no longer boot after attempting to install - 55gb and 222gb) I am fine with losing the data on the 222gb partition, but when trying to install it only shows the 55gb and the 222gb, but the 222gb is not 222gb...its including the 40gb backup. Whatever, went through with the installation anyway. Files can be replaced (just backed-up games anyway.) Installation appears to run without a hitch on the now 222gb/262gb partition, formatted to ext4 with the installer itself. Asks to reboot to begin using. Upon rebooting, I get the GNU boot selection screen. Press Enter on "Ubuntu". Get a "Gave up booting from root..." or something error. Reboot and load "Try without installing" option from USB. Once booted, nothing has changed! All 3 partitions are still present, all files intact. But now I can't boot my Win7 55gb partition. EVERYTHING in the "Try..." loader works perfectly. Bluetooth, Wifi, Display adapter, SD Card reader, HDMI-Out, DVD drive, USB ports...even reads correct battery data. Help?

  Read the article

• My laptop with Linux/ Ubuntu isn't working

  - by Andy Campos

  I have a dell laptop with ubuntu linux. A day I tried to start it up and a black screen just appeared that says: GNU GRUB version1.98+20100804-5ubuntu3 (and these clickable options:) -Ubuntu, with Linux 2.6.35-22-generic -Ubuntu, with Linux 2.6.35-22-generic (recovery mode) -Memory test (memtest86+) -Memory test (memtest86+, serial console 115200) When I click the first one, a bunch of text appears like: mount: mounting /dev/disk/by-uuid/8396a225... failed: invalid argument mount: mounting /dev on /root/dev failed: no such file or directory mount: mounting /sys on /root/sys failed: no such file or directory mount: mounting /proc on /root/proc failed: no such file or directory Target file system doesn't have requested /sbin/init No init found. Try passing init= bootarg Enter 'help' for a list of built-in commands BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) (initramfs) When I enter 'help' a bunch more incomprehensible text appears. Whenever I press the enter key all that pops up is (intetramfs) If anyone can make rhyme or reason out of this please, please help me out so it can boot up normally and i can be set. If there's some kind of special code I have to type in or something I know nothing about computers.

  Read the article

• Laptop Charger Not Recognised Properly on Samsung NP900X3F

  - by user193732

  Firstly thanks for your time. Secondly, having an issue with my power charger on my Samsung Series 9 NP900X3F. When I boot into Ubuntu with the charger plugged in it recognises it as charging. When I unplug the charger after this it is still says it is charging. If I suspend in Ubuntu then plug/unplug during this suspended state it recognises it, but not during normal running. If I knew a little more I'm sure I could grab logs and find out what the difference between wake on suspend and normal running is, but alas I need help! I also am having issues with my keyboard backlight via the fn keys, but that I care about far less. Thank you very much. Linux mikey-900X3F 3.12.0-031200rc1-generic #201309161735 SMP Mon Sep 16 21:38:21 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux (I upgraded my kernel version to remove heinous horizontal artefacts I was getting) Happy to list more info about my system, ima bit of a noob. I did try searching however I can't find any questions at all about my system or related models with the same issue.

  Read the article

• bluetooth daemon not running at startup

  - by ffaxer

  I'm trying to connect a bluetooth mouse to my Xubuntu system using Blueman (v. 1.21) Problem seems to be bluetoothd not running at startup, so blueman refuses to start, only a dialog appears: "Bluez daemon is not running, blueman-manager cannot continue." On my system, bluetoothd will run only as root (sudo), so my current workaround is simply to sudo bluetoothd manually, which works fine but id like to have it run at startup so that my mouse is just working without any interaction from me, if possible. If i try to start bluetoothd as non-root it reports: Bluetooth deamon 4.91 Unable to get on D-Bus In the startup scripts i found the same bluetoothd script in all runlevels and init.d: DAEMON=/usr/sbin/bluetoothd test -f /usr/sbin/bluetoothd || exit 0 # bluetoothd normally starts up by udev rules. it needs dbus to function, log_progress_msg "bluetoothd" pkill -TERM bluetoothd || true log_progress_msg "bluetoothd" I looked in /etc/udev/rules.d/ but no reference to bluetoothd. Further i have already tried with no luck: Editing /etc/dbus-1/system.d/bluetooth.conf to include my user (essentially copying the part that was for root): I tried it while both keeping the root policy and without, still, no luck! Editing /etc/pam.d/common-session and /etc/pam.d/gdm to include the line: session optional pam_ck_connector.so In the case of common-session it was already there but with a "nox11" which i tried removing. No luck no luck. Btw, I'm confused as to which session manager I'm using, since i have both xfce4-session and gdm-session-worker running. Anyways, hope someone is savvy enough to figure it out or bring some hints, otherwise i sincerely apologize for wasting your time! I'll sign off with uname -a: Linux [mycompname] 3.0.0-9-lowlatency #12ppa1~natty1-Ubuntu SMP PREEMPT Mon Aug 22 06:52:15 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux Peace B)

  Read the article

• Cannot see boot options after editing grub background

  - by cipricus

  After solving this problem I managed to get myself into truble again out of nothing by trying to change the display of the dual boot option page in Boot Customizer. I have changed the background, the fonts size (I have increased them) and font style (I have chosen UnDotum). But Boot Customizer gave me an error (I mean a message that the application was closed unexpectedly or smth). I have restarted BootCustomizer and the settings were there. When I rebooted, instead of the normal boot options list, just the background image that I had selected and nothing else. I used Boot Repair to repair grub, it says it did it successfully, but I still get the background image when I try to boot. Any ideas? (Could it be the matter that I chose UnDotum font style? That was installed in Lubuntu - but how could it be accessible in displaying boot options?) The contents of etc/default/grub are: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" I have tried to modify etc/default/grub: GRUB_HIDDEN_TIMEOUT=0 to 10 GRUB_HIDDEN_TIMEOUT_QUIET=true to false and GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" to "" but it doesn't help Also, using Shift doesn't make the list visible. I am looking for something like a command that would reset grub options to default. [When trying to reinstall grub i get to this window in term:

  Read the article

• Battery is drained too quickly

  - by LucaB

  I'm getting really low battery life under ubuntu, not even close to windows. I tried powertop, and I saw that my laptop is consuming in idle nearly 20 watts (a bit more). I tried to install laptop-mode-tools, change "good" into "bad" in powertop, but nothing changes. I see that I have the the HD audio output device which is running at 100% every time. Could this be the problem? This is a report from powertop. The battery reports a discharge rate of 22.8 W The estimated remaining time is 33 minutes Summary: 381.8 wakeups/second, 0.0 GPU ops/second and 0.0 VFS ops/sec Usage Events/s Category Description 3.2 ms/s 182.7 Timer tick_sched_timer 100.0% Device Audio codec hwC0D3: Intel 7.9 ms/s 25.1 Process /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background no 1.9 ms/s 24.2 Interrupt [6] tasklet(softirq) 2.9 ms/s 23.2 Process /usr/lib/chromium-browser/chromium-browser --type=zygote 8.1 ms/s 20.3 Process /usr/lib/unity/unity-panel-service 0.7 ms/s 17.4 Timer hrtimer_wakeup 4.2 ms/s 12.6 Process unity-2d-panel 604.4 µs/s 9.7 Process syndaemon -i 2.0 -K -R -t 149.7 µs/s 9.7 kWork ieee80211_iface_work 0.8 ms/s 8.7 Process metacity 19.5 ms/s 1.0 Process powertop 3.0 ms/s 6.8 Process //bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session 699.0 µs/s 6.8 Process /usr/lib/thunderbird/thunderbird 4.3 ms/s 4.8 Process gnome-terminal 658.9 µs/s 2.9 Interrupt [1] timer(softirq) 75.1 µs/s 2.9 kWork iwl_bg_run_time_calib_work 163.8 µs/s 1.9 Process /usr/lib/accountsservice/accounts-daemon 70.6 µs/s 1.9 Process [ksoftirqd/2] 25.8 µs/s 1.9 Process [ksoftirqd/0] 1.0 ms/s 1.0 Process /usr/bin/python /usr/sbin/powernapd 408.2 µs/s 1.0 Process unity-2d-shell 189.8 µs/s 1.0 Process /usr/lib/chromium-browser/chromium-browser 124.4 µs/s 1.0 Process /usr/lib/unity-lens-applications/unity-applications-daemon 113.3 µs/s 1.0 Process /usr/lib/gnome-settings-daemon/gnome-settings-daemon 112.0 µs/s 1.0 Process nautilus -n 104.9 µs/s 1.0 Process /usr/lib/gvfs/gvfsd-trash --spawner :1.2 /org/gtk/gvfs/exec_spaw/0 77.5 µs/s 1.0 Process /usr/lib/x86_64-linux-gnu/colord/colord 75.6 µs/s 1.0 Process /usr/lib/gvfs/gvfs-gdu-volume-monitor 75.0 µs/s 1.0 Interrupt [53] i915 74.9 µs/s 1.0 Process /usr/lib/gvfs/gvfs-afc-volume-monitor What should I do to make the battery consumption lower?

  Read the article

• 12.0.4.3 - Missing Battery Icon, auto Suspend not working, Keyboard shortcuts volume up/down no longer working

  - by Navraj

  Problems I am experiencing: Battery Icon not showing up unity bar (top right corner). Volume Up/Down/Mute not working. Bluetooth hot keys described above also not working.Brightness up/down keys on this keyboard no longer working (apple wireless keyboard) Laptop no longer suspends when lid is shut. I have to go to 'power' button on top right corner and click on 'Suspend' All was working flawlessly until I did the following: I have recently upgraded to Nvidia propriety driver version 319 {version recommended}. Installed Xscreensaver and then removed it and went back to default screensaver. Done a system update (1st since installing) and now currently running: Linux 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:19:35 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux NOTE: Base system was ubuntu 12.04.3 installed from ISO however lsb_release reports "No LSB modules are available" 4.installed psensor. I have check power setting (via Settings) and power setting via dconf-editor and set to recommended settings as described in posts detailing solution to this problem. - I have disabled 1) Nvdia settings at startup and 2) psensor at startup but this does not help. I am using an HP DV7 with 2GB Nvidia card. Not using any fancy graphics features. Recommendations? Thanks.

  Read the article

• hdmi audio works only with aplay -D alsa test wavs; open source radeon drivers; kernel 3.5 vgaswitcheroo

  - by user108754

  I've trolled the internets to make hdmi work on my system Ubuntu 12.04 software center kernel 3.5 uname: Linux ubuntu 3.5.0-18-generic #29~precise1-Ubuntu SMP...x86_64 x86_64 x86_64 GNU/Linux open source radeon drivers vgaswitcheroo (hybrid intel/radeon gpu): I boot with intel, not radeon, running. (and recall that with kernel 3.5, vgaswitcheroo now gives info on a third item, "DIS-Audio"; it indicates pwr on my system) ( /etc/rc.local: chown user:user /sys/kernel/debug/ # change "username" with your user name echo OFF /sys/kernel/debug/vgaswitcheroo/switch ) grub indeed now has "radeon.audio=1" for testing audio, I did aplay -l which gave me the card and device, which made me try aplay -D plughw:1,3 /usr/share/sounds/alsa/Front_Center.wav and lo! I get crystal clear sound on my hdtv. If I play an mp3 file as the argument to that command, I get noise as, I guess, aplay interprets the mp3 code as a wav. If I play a .wav that is not in the /usr/share/sounds/alsa/ directory, I get nothing. Internet flash video in browser plays no sound over hdmi. Both system sounds control and pavucontrol have hdmi cedar selected. Alas, I can not get sound for any gui test (left, right). Why would only aplay, and only when directed with "-D plughw", yield sound over hdmi? I've also tried only using one sound program at a time, if it was a limitation of alsa, so I tried aplay with web browser and even the sound control gui closed. I tried each of the last two, running alone. No improvement. alsamixer only shows hda intel and I think it's only the intel audio, not the hdmi.

  Read the article

• A short but intense GCC Gathering in London

  - by user817571

  About one week ago I joined in London many long time GCC friends and acquaintances for a gathering organized by Google (in particular I guess should be thanked Diego and Ian). Only a weekend, and I wasn't able to attend on Sunday morning, but a very good occasion to raise some issues in a very relaxed way, in particular those at the border between areas of competence, which are the most difficult to discuss during the normal work days. If you are interested in a general overview and some notes this is a good link: http://gcc.gnu.org/wiki/GCCGathering2011 As you may easily guess, the third topic is mine, which I managed to have up quite early on Friday morning thanks to the votes of some good friends like Dodji (the ordering of the topics resulted from democratic voting on Friday evening!). I learned a lot from the discussion: for example that certainly the new C++11 'final' should be exploited largely in the c++ front-end; the various reasons why devirtualization can be quite trick (but I'm really confident that Martin and Honza are going to make a good progress also basing on a set of short testcases which I promised to collect); that, as explained by Ian, the gold linker already implements the nice --icf (Identical Code Folding) facility, which some friends of mine are definitely going to like (however, see: http://sourceware.org/bugzilla/show_bug.cgi?id=12919). I also enjoyed the observations made by Lawrence, where he remarked that in C+11 we are going to see more pointer iterations implicitly produced by the new range-based for-loop and we really want to make sure the loop optimizers are able to deal with those as well as loops explicitly using a counter. All in all, I really hope we are going to do it again!

  Read the article

• Why does running this program on 11.10 give a 'GLIBC_2.15 not found' error?

  - by RafLance

  I am trying to install Absinthe 2.0.4 on Ubuntu 11.10 on a netbook. When I try to run the install file, this keeps on happening: rafael@RafLaptop:~/Desktop/absinthe-linux-2.0.4$ ./absinthe.x86 ./absinthe.x86: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by ./absinthe.x86) Do I need to upgrade GLIBC? If so, how do I do that? Since I'm on a netbook I can't use a LiveCD so I wanted to know if there was a way I could fix this issue without reinstalling my whole OS. Any explanations about what GLIBC is exactly would be great too since this is a learning experience for me. I know that GLIBC is a part of libc.so.6 and so I tried to run sudo apt-get install libc.so.6 but was told that it was up to date. But GLIBC isn't? I hope this articulates my problem well, if there are any pieces of missing info or questions to clarity my question, please let me know! ~-~ EDIT/UPDATE: So after some help on the AskUbuntu chat room from user izx, I have gathered the following information/understanding: -I need to run this program with Ubuntu 12.04 or recompile it from source -Upgrading libc on Oneiric to 2.15 while possible, is not an easy task and is not officially supported.

  Read the article

• glibc not found when trying to install Absinthe?

  - by RafLance

  I am trying to install Absinthe 2.0.4 on Ubuntu 11.10 on a netbook. When I try to run the install file, this keeps on happening: rafael@RafLaptop:~/Desktop/absinthe-linux-2.0.4$ ./absinthe.x86 ./absinthe.x86: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by ./absinthe.x86) Do I need to upgrade GLIBC? If so, how do I do that? Since I'm on a netbook I can't use a LiveCD so I wanted to know if there was a way I could fix this issue without reinstalling my whole OS. Any explanations about what GLIBC is exactly would be great too since this is a learning experience for me. I know that GLIBC is a part of libc.so.6 and so I tried to run sudo apt-get install libc.so.6 but was told that it was up to date. But GLIBC isn't? I hope this articulates my problem well, if there are any pieces of missing info or questions to clarity my question, please let me know! ~-~ EDIT/UPDATE: So after some help on the AskUbuntu chat room from user izx, I have gathered the following information/understanding: -I need to run this program with Ubuntu 12.04 or recompile it from source -Upgrading libc on Oneiric to 2.15 while possible, is not an easy task and is not officially supported.

  Read the article

• Ubuntu installation does not recognize drive partinioning

  - by Woltan

  I have a 1TB drive and installed Windows 7 on a 128GB partition. When I now try to install Ubuntu 11.04 it does not recognize the Windows partition but offers the complete 1TB drive to install Ubuntu on instead. It displays: However, in the Ubuntu Disk Utility the Windows partitions are recognized. What do I need to do in order for Ubuntu to recognize the Windows 7 partition and install Ubuntu as a dual boot? Response to comments The following commands were executed and the results are shown below: fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x34a38165 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 16318 130969600 7 HPFS/NTFS Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x14a714a6 Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 83 Linux parted -l Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: /dev/sr0: unrecognised disk label

  Read the article

• A "tinkered" PC can ping by IP, not by hostname. How to fix?

  - by aitchnyu

  Like this: root@tis-server:~# ping www.google.com ping: unknown host www.google.com root@tis-server:~# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_req=1 ttl=55 time=50.3 ms 64 bytes from 8.8.8.8: icmp_req=2 ttl=55 time=65.4 ms It was tinkered by somebody else and I (and him!) cant trace his actions. The graphical connection manager also refuses to work thanks to the tinkering. It also makes route add default gw 192.168.0.1 necessary for each reboot to atleast ping by IP. How do I fix this? It is Ubuntu 11.10 As requested: Output of ifconfig: eth0 Link encap:Ethernet HWaddr 48:5b:39:ae:21:98 inet addr:192.168.0.100 Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::4a5b:39ff:feae:2198/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13194 errors:0 dropped:0 overruns:0 frame:0 TX packets:5156 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1420596 (1.4 MB) TX bytes:827295 (827.2 KB) Interrupt:42 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4817 errors:0 dropped:0 overruns:0 frame:0 TX packets:4817 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:377732 (377.7 KB) TX bytes:377732 (377.7 KB) Output of resolv.conf: Output of /etc/network/interfaces: GNU nano 2.2.6 File: /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.100 netmask 255.255.255.0

  Read the article

• Upgrade went wrong, laptop essentially 'bricked'

  - by hexagonheat

  I have an old netbook I was trying to upgrade from 10.04 to 10.10. Ubuntu was in the process of upgrading when everything completely froze. I left it sit for an hour but it would not respond to anything. So I powered down the machine and it didn't have the necessary files to run Ubuntu. I went to the terminal and it told me to put in some command that I can not remember to 'rebuild' something. That takes me to now, when I turn on the laptop it comes up with a screen "GNU GRUB version 1.98+20100804-5ubuntu3.3" and has a bunch of options such as: 1. Ubuntu, with Linux 2.6.35-32-generic 2. Ubuntu, with Linux 2.6.35-32-generic (recover mode) etc. (there are like 15 of these with different numbers after 2.6.35 and the word 'generic'. It doesn't seem to matter what I pick, it will go to the "Ubuntu" loading screen with the colored dots but then every time it will freeze and I have to reboot to the same thing. I can't seem to get a terminal prompt anywhere either. Any ideas? I can't think of what to do :(

  Read the article

• Grub does not show a Windows 8 option after dual boot

  - by skytreader

  So, I've successfully dual-booted my Windows 8 machine with Ubuntu 12.04 . However, I still don't have a convenient method of choosing what OS to load at boot time. After installing Ubuntu, my computer still loads Windows 8 directly. I then added grubx64.efi to the white list of my boot loader. But after that, my machine loads Ubuntu directly without even a shadow of GRUB showing up! I used boot-repair and I got this paste.ubuntu URL: paste.ubuntu.com/1326074. After running boot-repair (and re-white listing the grubx64.efi file), GRUB now shows up but without any Windows 8 option! Lastly, I ran sudo fdisk -l and it gave me this: WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x6396389f Device Boot Start End Blocks Id System /dev/sda1 1 1465149167 732574583+ ee GPT Partition 1 does not start on physical sector boundary. I'm guessing my problem has something to do with the warning from fdisk above but I don't know what to do with it. How do I proceed now?

  Read the article

• Ubuntu server 11.04 recognize only 1 core instead of 4

  - by Kreker

  I searched for other questions and googled a lot but I don't find a solution for solving this problem. Ubuntu Server 11.04 64bit installed on Dell Poweredge with Intel Xeon X5450. He only recognize 1 of the 4 cores I have. Tried to modify the GRUB config but didn't work. IN the machine BIOS I didn't find anything useful. CPU root@darwin:~# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU X5450 @ 3.00GHz stepping : 10 cpu MHz : 2992.180 cache size : 6144 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave lahf_lm dts tpr_shadow vnmi flexpriority bogomips : 5984.36 clflush size : 64 cache_alignment : 64 address sizes : 38 bits physical, 48 bits virtual power management: GRUB root@darwin:~# cat /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=2 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_CMDLINE_LINUX="noapic nolapic" #was with acpi=off # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" Complete dmesg Too long, posted on pastebin http://pastebin.com/bsKPBhzu

  Read the article

• How to prevent window list "confusion" when detaching eclipse views?

  - by amotzg

  I'm detaching eclipse views to float on my other screen in order to get more coding space on the first screen. When doing that, the detached windows appear in ubuntu's window list applet with the eclipse icon but with no title. Then, when pushing the main eclipse button on the window list, one of the detached views will get to front but not the main eclipse window. When using Alt+tab I can also see the extra eclipse icons but choosing the correct one for the main window works and make it the active window while also showing all detached childs. Other applications behave as expected, e.g. gimp floating panels don't show on the windows list and this is also the case with SlickEdit, Firefox child windows all show on window list but gets the focus correctly, etc. I can see the the workspace switcher show my two screens but in 'Monitor preferences' I see my two screens as one big screen. I'm working with ubuntu 10.04.4 under a VMware Workstation 7.1.3 build-324285. 'uname -a' output: Linux ubuntu 2.6.32-40-generic #87-Ubuntu SMP Tue Mar 6 00:56:56 UTC 2012 x86_64 GNU/Linux The desktop screen shot with the problem, ununtu's version, and Monitor preferences. How can I solve it and make only the main window show in window list or at least get activated when pushing it's button on the window list?

  Read the article

• Failure to Boot Windows 7 after Ubuntu install

  - by Mike

  My computer is a (brand new) PC notebook, without a CD drive running Windows 7. I followed this page to install from USB: https://help.ubuntu.com/community/Installation/FromUSBStickQuick The installation went well and i am using Ubuntu now (v. 12.04 i believe) I want to be able to dual boot Ubuntu and Win7 The problem is that the disc partitioning during the Linux install caused a problem with Windows, caused some problem with windows, and windows can no longer boot when i choose it at the GNU GRUB screen. When i restart my computer i can successfully boot Linux, but not Windows 7. At the GRUB screen - if i run Win7 normally, it freezes, shows a blue screen, and returns back to GRUB - if i run Win7 recovery, i dont know how to access the files that i need in order to run windows again, so nothing helpful happens. Can you please tell me what i would need to do(or link a guide) in order to run Windows again. (Windows and Linux is preferable, but if thats impossible going back to only Windows will help too) Im guessing the easiest thing to do is just to reinstall both OS, or is there anyway to undo the partition i made during the install? Thanks

  Read the article

• to upgrade / install wine 1.55 on ubuntu 12.04 or any distro

  - by user67550

  Wine news and installation 1.5.5 on ubuntu Now available in PPA wine version 1.55, an application that lets Windows programs run on any distribution with GNU / Linux. Wine (recursive acronym in English for Wine Is Not an Emulator, which means "Wine Is Not an Emulator") is a reimplementation of the application programming interface for Win16 and Win32 operating systems based on Unix. Allows execution of programs designed for MS-DOS and Microsoft Windows Version 3.11, 95, 98, Me, NT, 2000, XP, Vista and 7 The name was originally an acronym Wine Windows Emulator. This meaning was later changed to the current recursive acronym. These are some of the highlights: Support for the installation of Mono as a complement to wine in the package. The dither pattern brushes in the motor DIB. Support to install the runtime. NET 4.0. D3dx9 DDS files supported. Several bug fixes. To install on Ubuntu just open the console and type: sudo add-apt-repository ppa: ubuntu-wine/ppa sudo apt-get update sudo apt-get install wine1.5 Source: ubuntutips If you enjoyed this post share it with your friends, thanks

  Read the article

• How can i make Brightness Control work?

  - by Semen

  I have Xubuntu 12.04 with latest updates on Toshiba Satellite A210-15K laptop semen@bloknot:~$ uname -a Linux bloknot 3.2.0-24-generic #37-Ubuntu SMP Wed Apr 25 08:43:22 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux ...and I can't adjust LCD brightness (. I tried to use fnfx tool: semen@bloknot:~$ fnfx-client FnFX Client v0.3 (c) 2003, 2004 Timo Hoenig <[email protected]> fatal error: Could not open "/home/semen/.fnfxrc". Please make sure that the default config is accessible. ...and xbacklight: semen@bloknot:~$ xbacklight No outputs have backlight property ...and I tried to add acpi_osi=Linux and acpi_backlight=vendor parameters in GRUB config, but nothing happens. I soppose .fnfxrc file must be available after installation or first fnfx demon lauch. Isn't it? semen@bloknot:~$ cat /sys/class/backlight/toshiba/brightness -5 semen@bloknot:~$ cat /sys/class/backlight/toshiba/max_brightness 7 semen@bloknot:~$ echo 6 | sudo tee /sys/class/backlight/toshiba/brightness [sudo] password for semen: 6 ... ...but brightness is the same. Help, please. P.S. Execuse me for my poor English. UPD. I have spent 2 days to solve this boring problem, but I can't. So. If I wish linux work correctly, I have to choose another distro.

  Read the article

• Install tmux on Mac OS X

  - by unixben

  This is a short run down on how to get tmux running on your Mac OS X system. The same methodology applies when compiling this on Solaris. What is tmux? According to the developer's page, "tmux is a terminal multiplexer: it enables a number of terminals (or windows), each running a separate program, to be created, accessed, and controlled from a single screen. tmux may be detached from a screen and continue running in the background, then later reattached". Why not just use screen? For me, the primary reason I switched to tmux from screen is the much easier configuration syntax that tmux offers. If you've ever struggled with formatting screen's caption or hardstatus line, then you will appreciate the ease with which you can achieve the same results in tmux. Preparing your environment You will need a C compiler installed. I believe that OS X ships by default with GNU make, but if not, then you will need to obtain it or use Xcode. Download the sources While I'm putting all this together, I like to keep everything neatly tucked away in a build directory. mkdir ~/build cd ~/build curl -OL http://downloads.sourceforge.net/tmux/tmux-1.5.tar.gz curl -OL http://downloads.sourceforge.net/project/levent/libevent/libevent-2.0/libevent-2.0.16-stable.tar.gz Unpack the sources tar xzf tmux-1.5.tar.gz tar xzf libevent-2.0.16-stable.tar.gz Compiling libevent cd libevent-2.0.16-stable ./configure --prefix=/opt make sudo make install Compiling tmux cd ../tmux-1.5 LDFLAGS="-L/opt/lib" CPPFLAGS="-I/opt/include" LIBS="-lresolv" ./configure --prefix=/opt make sudo make install That's all there is to it!

  Read the article

• Trying to install Proprietory Nvidia Graphics Drivers

  - by Peter Snow

  After reading and trying many different suggestions for some hours, I returned to this how-to: https://help.ubuntu.com/community/BinaryDriverHowto/Nvidia The first problem I encounter is how to identify which of the listed drivers support my Nvidia GEForce 630M graphics card. Following the links doesn't really help, since it is not stated there either (except where support for a new driver was added later which is explicitly stated, but the original devices covered are not). However, even if I knew, if it doesn't appear in the 'Additional Drivers' dialogue (see below), how will I install it? Second Issue: The article goes on to say that available drivers for my hardware are usually listed in 'Additional Drivers'. In my case, they aren't. Unfortunately, it doesn't tell me how to correct that or work around it? I've checked the bios and there is no way offered there to disable the integrated graphics, only the Nvidia graphics. I've also tried each available option in this: $ sudo update-alternatives --config i386-linux-gnu_gl_conf My system is an Acer Aspire 4752G bought May 2012. I'm running Ubuntu 12.04LTS. uname -a : 3.2.0-38-generic-pae #61-Ubuntu SMP Tue Feb 19 12:39:51 UTC 2013 i686 i686 i386 GNU/Linux It's 64bit hardware but I installed 32bit OS for greater software compatibility. Running $ sudo tail -fn 500 /var/log/Xorg.0.log | grep '(EE)' returns" (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 28.886] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) The reason for wanting the proprietor y drivers is because my laptop comes with 3D accelerated graphics adaptor and so rather than confining myself to struggling with the on-board graphics, I would rather use it. I also want to experiment with using it for bitmining (which uses the GPU's for computing power).

  Read the article

• Hybrid Graphics on Ubuntu 12.04 switching to discrete

  - by cfstras

  I have a Sony Vaio VPCCB-27FX with hybrid graphics. Using vgaswitcheroo enables me to switch my discrete card off to save power. Now when i want to switch to the discrete card for performance, my system freezes. I already tried logging out and killing x with service lightdm stop, but still, it freezes as soon as I echo DIS > switch. typing blindly, echo IGD > switch returns me to my console where it reads [ 179.555171] i915: switched off, but it seems the discrete card never gets switched on... running echo DDIS > switch gives me the following: [540....] [drm:atop_op_jump] *ERROR* atombios stuck in loop for more than 5secs aborting [540....] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing CEE2 (len 62, WS 0, PS 0) @ 0xCEFE [540....] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing BBF6 (len 1036, WS 4, PS 0) @ 0xBCF3 [540....] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing BB8C (len 76, WS 0, PS 0) @ 0xBB94 [541....] [drm:r600_RING_TEST] *ERROR* radeon: ring test failed (scratch(0x8504)=0xFFFFFFFF) [541....] [drm:evergreen_resume] *ERROR* evergreen startup failed on resume after that, the atombios part repeats a few times. also, the terminal locks up again and sysrq+REISUB is my only rescue. Has anybody an idea how I can switch to my discrete card without the system locking up? #uname -srvmpio Linux 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux #lsb_release -r Description: Ubuntu 12.04 LTS

  Read the article

• How do I fix the HDMI/DVI display output with Intel HD 4000 Graphics in 12.04?

  - by YumYumYum

  I have an Alienware Dell PC with Intel HD 4000 Graphics (Ivy Bridge) as verified by the output of lspci | grep VGA posted below. 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) The PC only has HDMI and DVI display outputs and using the HDMI output I am only being offered abnormal resolutions. As you can see below it does not even list HDMI1 or DVI1 but just only a fallback. $ export DISPLAY=:0.0 && xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 1360 x 768, maximum 1360 x 768 default connected 1360x768+0+0 0mm x 0mm 1360x768 0.0* 1024x768 0.0 800x600 0.0 640x480 0.0 How can I fix this? Does it just need to be configured differently or will I need to use a newer kernel (as Intel Graphics drivers are included in the kernel)? Follow up: kernel to latest Step 1: Go to: http://kernel.ubuntu.com/~kernel-ppa/mainline/ Go to last: http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/ Download: http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-headers-3.6.0-030600rc3-generic_3.6.0-030600rc3.201208221735_amd64.deb http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-headers-3.6.0-030600rc3_3.6.0-030600rc3.201208221735_all.deb http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-image-3.6.0-030600rc3-generic_3.6.0-030600rc3.201208221735_amd64.deb http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-image-extra-3.6.0-030600rc3-generic_3.6.0-030600rc3.201208221735_amd64.deb Step 2: sudo dpkg -i linux*.deb Step 3: reboot which shows that i have Ubuntu 12.04 with latest $ uname -a Linux sun-Alienware-X51 3.6.0-030600rc3-generic #201208221735 SMP Wed Aug 22 21:36:32 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux But still same problem remain.

  Read the article

• Audio comes out of both headphone and speaker at the same time.. Ubuntu 12.04LTS [closed]

  - by pst007x

  I have the same issue on an Aspire. Ubuntu 12.04LTS 64bit realtek audio sound chip onboard If I plug in a headset, audio does not switch from internal speaker to headset, instead plays out of both at the same time. I have looked at the alsamixer setting, all on. I installed gnome-alsamixer, and I noticed headphone was ticked, if I untick the main audio mutes, and the headphone no longer works. Headset only works with internal speaker. Audio works fine on my other desktop and laptop running this release 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) salvatore@salvatore-Aspire-7730:~$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.24. salvatore@salvatore-Aspire-7730:~$ head -n 1 /proc/asound/card*/codec#* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC888 ==> /proc/asound/card0/codec#1 <== Codec: LSI ID 1040 ==> /proc/asound/card0/codec#2 <== Codec: Intel Cantiga HDMI salvatore@salvatore-Aspire-7730:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 salvatore@salvatore-Aspire-7730:~$ uname -a Linux salvatore-Aspire-7730 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux salvatore@salvatore-Aspire-7730:~$ The alsa-base.conf does not exist Tried this: sudo apt-get remove --purge alsa-base sudo apt-get remove --purge pulseaudio sudo apt-get install alsa-base sudo apt-get install pulseaudio sudo alsa force-reload Then: sudo apt-get purge pulseaudio gstreamer0.10-pulseaudio sudo apt-get install pulseaudio gstreamer0.10-pulseaudio indicator-sound Tred this. sudo gedit Then open terminal: sudo /etc/modprobe.d/alsa-base.conf At the end of the file add a new line: options snd-hda-intel model=generic Save and then reboot But alsa-base.conf does not exist

  Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >