Search Results

Search found 1276 results on 52 pages for 'headphone jack'.

Page 49/52 | < Previous Page | 45 46 47 48 49 50 51 52  | Next Page >

  • Triple-monitor set-up (2 unique, 1 cloned): Can a VGA splitter be used on one output of a dual-head

    - by stakx
    Background: I'm currently researching hardware components for some kind of information terminal we're building. This application of ours makes use of three output screens: (1) A touch screen where all user input is made; (2) A regular LCD monitor where the requested information is being displayed; and (3) A projector which displays exactly the same signal as screen (2) does. (All screens will run at the same resolution of 1024x768 btw.) Now I figured that using a dual-head video card would be sufficient, let's say a Matrox P690 low-profile PCI card. This would involve having a Y cable connected to the graphics card itself, then two DVI-to-VGA adapters at each end of the Y cable, and then having a VGA splitter on one of the VGA outputs. The following shows the setup in question: 0--1---------2-> VGA (DSUB-15) \ \ ----2-3---------> VGA (DSUB-15) \ \ -----------------> VGA (DSUB-15) 0: graphics card (LFH60 jack) 1: LFH60 to DVI-I dual monitor Y cable 2: DVI-to-VGA adapters 3: VGA splitter cable Question(s): Will this work? I'm particularly concerned about the following points: Can a low-profile PCI video card output a signal which is strong enough for three monitors (even if it's a dual-head card)? Does the combination of so many adapters and splitter cables work? (The LFH-to-DVI cable comes with the video card) Will the VGA splitter cable degrade the signal on the output screen & projector significantly? (If so, would a USB-powered splitter cable remedy this problem?) I can't possibly expect anyone to answer all those questions, but any input is appreciated.

    Read the article

  • Why is my connection slow?

    - by Jay R.
    I have a Dell Precision T5400 with a Broadcom 1Gb onboard NIC. For some strange reason, when I access machines on our local network, the best I can get is around 125KB/s download speed. My laptop that has a 10/100Mb NIC onboard usually gets around 300KB/s or better from the same network resource. Both machines are plugged into the same 1Gb switch which connects to our local network wall jack at 100Mb half duplex. There is also a printer plugged into the same switch at 100Mb full. The resource I'm using for the test is a 30MB zip file copied from a jetty webserver that is running as part of a cruisecontrol installation. The cruisecontrol installation is running WindowsXP with full real-time antivirus and Altiris patch management and inventory running. That stuff on its own is eating some of the download speed. I've seen the laptop reach into the multiple MB/s download speed before, but the desktop never seems to get past 125KB/s to 130KB/s. In WindowsXP, before I upgraded the driver in the desktop, it was that slow. In Fedora, it is still slow even though it appears to be using the same driver version as the upgraded Windows driver. The upgraded Windows driver is faster, but still not nearly as fast as the laptop. What gives? Any insight to improve the situation would be appreciated. Could it be that the BroadCom board just isn't that good, or the driver in linux is just not as good as the Windows one?

    Read the article

  • Does a mini PCIe SSD fit into a Acer Aspire One?

    - by Narcolapser
    Question: What, if any, mini PCIe SSDs fit into the mini PCIe slot of the Acer Aspire one AOD250? Info: I have an Aspire One and I've been considering loading it with an SSD. The mini PCIe drives fascinate me and so I want to try that approach. Also they tend to be cheaper and not much slower. (at least not on Read time which matters more for a netbook) But I've heard that some times computers don't support certain mini PCIe cards. And I was wondering if anyone knew about the Aspire One? I tried asking Acer tech support, but they didn't know jack and spent the whole time informing that I would have to support my Ubuntu install on my own, which I was. Anyway. Rant Aside, I'm looking at this drive: http://www.newegg.com/Product/Product.aspx?Item=N82E16820183252 It states it is exclusively for the Eee PC. now does that mean It was designed for the Eee PC but will work in my netbook. or is something going to go wrong? (like right now my concern is it physically not fitting.) Any information would be appreciated. o7

    Read the article

  • Simulating audio playback on headless linux server

    - by afro
    Hi people, We have a headless linux server (Debian 5) we use for runnin integration tests of our web-page code. Among these tests are ones implemented using Selenium, which practically simulates a user browsing our pages and clicking on things. One of these tests is failing now, because it involves starting a flash-based audio player and checking to see whether the progress bar gets displayed properly. The reason this test fails is that there is no way to play the audio, and no sound card on the machine, which has simple webserver hardware. So, my question would be: Is there a simple way of giving a program the impression that its audio output is being processed, and playback is taking place? I don't have to record the playback, or redirect it or anything like that, just a dummy soundcard, like the dummy X-server we aer using, which actually does not need to display stuff. I have tried using JACK, but it's too complicated, and the documentation does not even answer this very simple question. I also installed alsa on the server; it 'pretends' to run, but when a program tries to play audio, just spews error and debug information having to do with the non-existence of a soundcard. It would be really awesome if one of you has a simple answer to this question. Cheers, Ulas

    Read the article

  • How to install missing Sound Drivers in Ubuntu?

    - by Sakamoto Kazuma
    I seem to be missing drivers for my Gateway laptop MA7. I have looked in System-Admin-Hardware Drivers, but it does not show up in there.There are also no devices listed in Sound-Hardware. I'm guessing at this point that I don't have the driver installed. However, I get the following output: admin@machine001:~$ cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xd8240000 irq 22 admin@machine001:~$ And my lspci shows: 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8038 PCI-E Fast Ethernet Controller (rev 14) 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) 04:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 04:09.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller 04:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) I have also checked alsamixer, and nothing is muted. No headphones plugged into headphone jack either. So the question now is, how do I get sound to work on my laptop? It doesn't work for any application.

    Read the article

  • Defragging Host OS of VMWare

    - by JackLocke
    Hi All, I want to ask something that has been puzzling me from last few days. I will try to explain my problem as clear as I can ... I have VMWare Workstation installed in my machine. And I use one separate 100Gb drive which stores all of my virtual machines, nothing else. Now, last week I was playing with a De-fragmentation tool called "Smart Defrag" which showed me in its analysis report that my drive where I am currently storing all of my Virtual Machines has more than 80% of fragmentation !!! Now my question is ... What will be the effect on my Guest / VM machine performance if I defrag my Host machine ... I mean this Host machine is essentially storing those virtual machines, but still dont have any direct access to what ever is stored in those machines ... so defraging the host should not cause any problem. But before proceeding, I want to hear from other people who may have met same problem. I will really appreciate any help ... BTW, I am using Windows 7 as Host and the guest machines I am using are Windows 2008 & 2003 & Ubuntu 10.04 THanks, Jack

    Read the article

  • Computer making strange sound when turned on, ever since power outage

    - by Dot NET
    Recently we experienced a power outage, and the PC was off. However, once the power came back, I switched on the PC and heard a strange noise - almost as if the hard disk or fans were struggling to work. I can't really describe the sound, but it's a laboured, loud sound almost like a jack-hammer. This has been persisting ever since the power outage, however the noise stops after around 10 minutes or so, and doesn't start again until the computer is turned off and on again. At first I thought it had something to do with the HDD, but all my files are intact, chkdsk did not report any issues and performance is 100% unchanged, even in games (so the gfx card is fine, and so is the HDD most likely). My PC setup basically has around 3 cooling fans, but I'm not sure if it's one of these either as the noise actually stops after 10 minutes or so, and if I leave the PC on for 4 hours (for example) the noise never starts again. It's there solely when turning on the PC. I haven't got a UPS, and it's important to note that the computer was not on when the power went out - it was merely plugged in. I then promptly unplugged the PC once the power was out, and only plugged it in again when the power came back. Could it be the power supply? Unfortunately I can't open my tower as I would void the warranty. Are there any tests which I could carry out without voiding the warranty?

    Read the article

  • DVI output only working on Windows, not during booting or on Linux

    - by Mononofu
    So yesterday I booted my laptop up and the external monitor I have it connected to just stayed black. At first, I thought the problem would go away when Ubuntu was loaded, but it didn't. I tried to reboot a few times, to no avail. Then I decided to give Windows 7 a try, and suddenly (at the login-screen), my external monitor turned on and worked like normal. I have connected the monitor via DVI, and this only seems to work with Windows now. I don't even get a signal in my BIOS! Mind you, everything was working fine before that, and I didn't change a single thing. I then tried to connect the monitor via VGA (from my DVI jack, which can output VGA using an adaptor), and it worked again. However, 1920x1200 using VGA looks like crap - black print on white background is basically illegible. Do you have any ideas how to fix this peculiar problem? I only use windows for gaming, so it's no real help that it still works normally. Please also excuse any spelling mistakes, I am practically typing this blindly. Edit: I only have one graphics card in my laptop, and I can't select anything related to that in my BIOS. In fact, I can pretty much do almost nothing there. My laptop is a Nexoc Osiris E703, graphics gard is a GeForce Go 7900 GTX. As I mentioned before, DVI output during booting and on Ubuntu was working fine for years before yesterday!

    Read the article

  • DVI output _only_ working on Windows, not during booting or on Linux

    - by Mononofu
    So yesterday I booted my laptop up and the external monitor I have it connected to just stayed black. At first, I thought the problem would go away when Ubuntu was loaded, but it didn't. I tried to reboot a few times, to no avail. Then I decided to give Windows 7 a try, and suddenly (at the login-screen), my external monitor turned on and worked like normal. I have connected the monitor via DVI, and this only seems to work with Windows now. I don't even get a signal in my BIOS! Mind you, everything was working fine before that, and I didn't change a single thing. I then tried to connect the monitor via VGA (from my DVI jack, which can output VGA using an adaptor), and it worked again. However, 1920x1200 using VGA looks like crap - black print on white background is basically illegible. Do you have any ideas how to fix this peculiar problem? I only use windows for gaming, so it's no real help that it still works normally. Please also excuse any spelling mistakes, I am practically typing this blindly. Edit: I only have one graphics card in my laptop, and I can't select anything related to that in my BIOS. In fact, I can pretty much do almost nothing there. My laptop is a Nexoc Osiris E703, graphics gard is a GeForce Go 7900 GTX. As I mentioned before, DVI output during booting and on Ubuntu was working fine for years before yesterday!

    Read the article

  • Records not being saved to core data sqlite file

    - by esd100
    I'm a complete newbie when it comes to iOS programming and much less Core Data. It's rather non-intuitive for me, as I really came into my own with programming with MATLAB, which I guess is more of a 'scripting' language. At any rate, my problem is that I had no idea what I had to do to create a database for my application. So I read a little bit and thought I had to create a SQL database of my stuff and then import it. Long story short, I created a SQLite db and I want to use the work I have already done to import stuff into my CoreData database. I tried exporting to comma-delimited files and xml files and reading those in, but I didn't like it and it seemed like an extra step that I shouldn't need to do. So, I imported the SQLite database into my resources and added the sqlite framework. I have my core data model setup and it is setting up the SQLite database for the model correctly in the background. When I run through my program to add objects to my entities, it seems to work and I can even fetch results afterward. However, when I inspect the Core Data Database SQLite file, no records have been saved. How is it possible for it to fetch results but not save them to the database? - (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions{ //load in the path for resources NSString *paths = [[NSBundle mainBundle] resourcePath]; NSString *databaseName = @"histology.sqlite"; NSString *databasePath = [paths stringByAppendingPathComponent:databaseName]; [self createDatabase:databasePath ]; NSError *error; if ([[self managedObjectContext] save:&error]) { NSLog(@"Whoops, couldn't save: %@", [error localizedDescription]); } // Test listing all CELLS from the store NSFetchRequest *fetchRequest = [[NSFetchRequest alloc] init]; NSEntityDescription *entityMO = [NSEntityDescription entityForName:@"CELL" inManagedObjectContext:[self managedObjectContext]]; [fetchRequest setEntity:entityMO]; NSArray *fetchedObjects = [[self managedObjectContext] executeFetchRequest:fetchRequest error:&error]; for (CELL *cellName in fetchedObjects) { //NSLog(@"cellName: %@", cellName); } -(void) createDatabase:databasePath { NSLog(@"The createDatabase function was entered."); NSLog(@"The databasePath is %@ ",[databasePath description]); // Setup the database object sqlite3 *histoDatabase; // Open the database from filessytem if(sqlite3_open([databasePath UTF8String], &histoDatabase) == SQLITE_OK) { NSLog(@"The database was opened"); // Setup the SQL Statement and compile it for faster access const char *sqlStatement = "SELECT * FROM CELL"; sqlite3_stmt *compiledStatement; if(sqlite3_prepare_v2(histoDatabase, sqlStatement, -1, &compiledStatement, NULL) != SQLITE_OK) { NSAssert1(0, @"Error while creating add statement. '%s'", sqlite3_errmsg(histoDatabase)); } if(sqlite3_prepare_v2(histoDatabase, sqlStatement, -1, &compiledStatement, NULL) == SQLITE_OK) { // Loop through the results and add them to cell MO array while(sqlite3_step(compiledStatement) == SQLITE_ROW) { CELL *cellMO = [NSEntityDescription insertNewObjectForEntityForName:@"CELL" inManagedObjectContext:[self managedObjectContext]]; if (sqlite3_column_type(compiledStatement, 0) != SQLITE_NULL) { cellMO.cellName = [NSString stringWithUTF8String:(char *)sqlite3_column_text(compiledStatement, 0)]; } else { cellMO.cellName = @"undefined"; } if (sqlite3_column_type(compiledStatement, 1) != SQLITE_NULL) { cellMO.cellDescription = [NSString stringWithUTF8String:(char *)sqlite3_column_text(compiledStatement, 1)]; } else { cellMO.cellDescription = @"undefined"; } NSLog(@"The contents of NSString *cellName = %@",[cellMO.cellName description]); } } // Release the compiled statement from memory sqlite3_finalize(compiledStatement); } sqlite3_close(histoDatabase); } I have a feeling that it has something to do with the timing of opening/closing both of the databases? Attached I have some SQL debugging output to the terminal 2012-05-28 16:03:39.556 MedPix[34751:fb03] The createDatabase function was entered. 2012-05-28 16:03:39.557 MedPix[34751:fb03] The databasePath is /Users/jack/Library/Application Support/iPhone Simulator/5.1/Applications/A6B2A79D-BA93-4E24-9291-5B7948A3CDF4/MedPix.app/histology.sqlite 2012-05-28 16:03:39.559 MedPix[34751:fb03] The database was opened 2012-05-28 16:03:39.560 MedPix[34751:fb03] The database was prepared 2012-05-28 16:03:39.575 MedPix[34751:fb03] CoreData: annotation: Connecting to sqlite database file at "/Users/jack/Library/Application Support/iPhone Simulator/5.1/Applications/A6B2A79D-BA93-4E24-9291-5B7948A3CDF4/Documents/MedPix.sqlite" 2012-05-28 16:03:39.576 MedPix[34751:fb03] CoreData: annotation: creating schema. 2012-05-28 16:03:39.577 MedPix[34751:fb03] CoreData: sql: pragma page_size=4096 2012-05-28 16:03:39.578 MedPix[34751:fb03] CoreData: sql: pragma auto_vacuum=2 2012-05-28 16:03:39.630 MedPix[34751:fb03] CoreData: sql: BEGIN EXCLUSIVE 2012-05-28 16:03:39.631 MedPix[34751:fb03] CoreData: sql: SELECT TBL_NAME FROM SQLITE_MASTER WHERE TBL_NAME = 'Z_METADATA' 2012-05-28 16:03:39.632 MedPix[34751:fb03] CoreData: sql: CREATE TABLE ZCELL ( Z_PK INTEGER PRIMARY KEY, Z_ENT INTEGER, Z_OPT INTEGER, ZCELLDESCRIPTION VARCHAR, ZCELLNAME VARCHAR ) ... 2012-05-28 16:03:39.669 MedPix[34751:fb03] CoreData: annotation: Creating primary key table. 2012-05-28 16:03:39.671 MedPix[34751:fb03] CoreData: sql: CREATE TABLE Z_PRIMARYKEY (Z_ENT INTEGER PRIMARY KEY, Z_NAME VARCHAR, Z_SUPER INTEGER, Z_MAX INTEGER) 2012-05-28 16:03:39.672 MedPix[34751:fb03] CoreData: sql: INSERT INTO Z_PRIMARYKEY(Z_ENT, Z_NAME, Z_SUPER, Z_MAX) VALUES(1, 'CELL', 0, 0) ... 2012-05-28 16:03:39.701 MedPix[34751:fb03] CoreData: sql: CREATE TABLE Z_METADATA (Z_VERSION INTEGER PRIMARY KEY, Z_UUID VARCHAR(255), Z_PLIST BLOB) 2012-05-28 16:03:39.702 MedPix[34751:fb03] CoreData: sql: SELECT TBL_NAME FROM SQLITE_MASTER WHERE TBL_NAME = 'Z_METADATA' 2012-05-28 16:03:39.703 MedPix[34751:fb03] CoreData: sql: DELETE FROM Z_METADATA WHERE Z_VERSION = ? 2012-05-28 16:03:39.704 MedPix[34751:fb03] CoreData: sql: INSERT INTO Z_METADATA (Z_VERSION, Z_UUID, Z_PLIST) VALUES (?, ?, ?) 2012-05-28 16:03:39.705 MedPix[34751:fb03] CoreData: sql: COMMIT 2012-05-28 16:03:39.710 MedPix[34751:fb03] CoreData: sql: pragma cache_size=200 2012-05-28 16:03:39.711 MedPix[34751:fb03] CoreData: sql: SELECT Z_VERSION, Z_UUID, Z_PLIST FROM Z_METADATA 2012-05-28 16:03:39.712 MedPix[34751:fb03] The contents of NSString *cellName = Beta Cell 2012-05-28 16:03:39.712 MedPix[34751:fb03] The contents of NSString *cellName = Gastric Chief Cell ... 2012-05-28 16:03:39.714 MedPix[34751:fb03] The database was prepared 2012-05-28 16:03:39.764 MedPix[34751:fb03] The createDatabase function has finished. Now fetching. 2012-05-28 16:03:39.765 MedPix[34751:fb03] CoreData: sql: SELECT 0, t0.Z_PK, t0.Z_OPT, t0.ZCELLDESCRIPTION, t0.ZCELLNAME FROM ZCELL t0 2012-05-28 16:03:39.766 MedPix[34751:fb03] CoreData: annotation: sql connection fetch time: 0.0008s 2012-05-28 16:03:39.767 MedPix[34751:fb03] CoreData: annotation: total fetch execution time: 0.0016s for 0 rows. 2012-05-28 16:03:39.768 MedPix[34751:fb03] cellName: <CELL: 0x6bbc120> (entity: CELL; id: 0x6bbc160 <x-coredata:///CELL/t57D10DDD-74E2-474F-97EE-E3BD0FF684DA34> ; data: { cellDescription = "S cells are cells which release secretin, found in the jejunum and duodenum. They are stimulated by a drop in pH to 4 or below in the small intestine's lumen. The released secretin will increase the s"; cellName = "S Cell"; organs = ( ); specimens = ( ); systems = ( ); tissues = ( ); }) ... Sections were cut short to abbreviate. But note that the fetch results contain information, but it says that total fetch execution was for "0" rows? How can that be? Any help will be greatly appreciated, especially detailed explanations. :) Thanks.

    Read the article

  • C++ Deck and Card Class Error with bad alloc

    - by user3702164
    Just started learn to code in school. Our assignment requires us to create a card game with card,deck and hand class. I am having troubles with it now and i keep getting exception: std::bad_alloc at memory location. Here are my codes right now CardType h: #ifndef cardType_h #define cardType_h #include <string> using namespace std; class cardType{ public: void print(); int getValue() const; string getSymbol() const; string getSpecial() const; string getSuit() const; int checkSpecial(int gscore) const; cardType(); cardType(string suit,int value); private: int value; string special; string symbol; string suit; }; #endif CardType cpp: #include "cardType.h" #include <iostream> #include <string> using namespace std; void cardType::print() { cout << getSymbol() << " of " << getSuit() << ", having the value of " << getValue() << "."<< endl <<"This card's special is " << getSpecial() << endl; } int cardType::getValue() const { return value; } string cardType::getSymbol() const { return symbol; } string cardType::getSpecial() const { return special; } string cardType::getSuit() const { return suit; } cardType::cardType(){ value=0; symbol="?"; special='?'; suit='?'; } cardType::cardType(string s, int v){ suit = s; value = v; switch(v){ case 1: // Ace cards have a value of 1 and have no special type symbol="Ace"; special="None"; break; case 2: // 2 cards have a value of 2 and have no special type symbol="2"; special="None"; break; case 3: symbol="3"; // 3 cards have a value of 3 and have no special type special="None"; break; case 4: symbol="4"; // 4 cards have a value of 0 and have a special type "Reverse" which reverses the flow of the game special="Reverse"; value=0; break; case 5: symbol="5"; // 5 cards have a value of 5 and have no special type special="None"; break; case 6: symbol="6"; // 6 cards have a value of 6 and have no special type special="None"; break; case 7: symbol="7"; // 7 cards have a value of 7 and have no special type special="None"; break; case 8: symbol="8"; // 8 cards have a value of 8 and have no special type special="None"; break; case 9: symbol="9"; // 9 cards have a value of 0 and have a special type "Pass" which does not add any value to the game and lets the player skip his turn. special="Pass"; value=0; break; case 10: symbol="10"; // 10 cards have a value of 10 and have a special type "subtract" which instead of adding the 10 value to the total game it is subtracted instead. special="Subtract"; value=10; break; case 11: // Jack cards have a value of 10 and have no special type symbol="Jack"; special="None"; value=10; break; case 12: // Queens cards have a value of 10 and have no special type symbol="Queen"; special="None"; value=10; break; case 13: symbol="King"; // King cards have a value of 0 and have a special type "NinetyNine" which changes the total game score to 99 reguardless what number it was previously special="NinetyNine"; value=0; break; } } int cardType::checkSpecial(int gscore) const{ if(special=="Pass"){ return gscore; } if(special=="Reverse"){ return gscore; } if(special=="Subtract"){ return gscore - value; } if(special=="NinetyNine"){ return 99; } else{ return gscore + value; } } DeckType h: #ifndef deckType_h #define deckType_h #include "cardType.h" #include <string> using namespace std; class deckType { public: void shuffle(); cardType dealCard(); deckType(); private: cardType *deck; int current; }; #endif DeckType cpp: #include <iostream> #include "deckType.h" using namespace std; deckType::deckType() { int index = 0; int current=0; deck = new cardType[52]; string suit[] = {"Hearts","Diamonds","Clubs","Spades"}; int value[] = {1,2,3,4,5,6,7,8,9,10,11,12,13}; for ( int i = 0; i <= 3; i++ ) { for ( int j = 1; j <= 13; j++ ) { deck[index] = cardType(suit[i],value[j]); index++; } } } cardType deckType::dealCard() { return deck[current]; current++; } Main cpp : #include "deckType.h" #include <iostream> using namespace std; int main() { deckType gamedeck; cout << "1" <<endl; cardType currentCard; cout << "2" <<endl; currentCard = gamedeck.dealCard(); cout << "3" <<endl; return 0; } I keep getting bad_alloc at the currentCard = gamedeck.dealCard(); I really do not know what i have done wrong.

    Read the article

  • How to get sound on macbook pro 4,1

    - by Thomas
    I have just installed Xubuntu 12.04.2. My soundcard is detected: thomas@thomas-pc:~$ sudo aplay -l **** List of PLAYBACK Hardware Devices **** Home directory /home/thomas not ours. card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC889A Digital [ALC889A Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 Everything is put to max in alsamixer and nothing is muted (all the sliders are on OO. My speakers do not work, but when I plug in a headphone I hear it very soft. When I connect my stereo and put the sound VERY loud (3-blocks-of-complaining-neighbours loud) I hear it on a normal level but crackling. I added options snd-hda-intel model=mbp5 amixer set IEC958 off to at the end of /etc/modprobe.d/alsa-base.conf. When it's still not working I tried everything here: https://help.ubuntu.com/community/SoundTroubleshooting 1 >>> list-sinks 1 sink(s) available. * index: 0 name: <alsa_output.pci-0000_00_1b.0.analog-stereo> driver: <module-alsa-card.c> flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE priority: 9959 volume: 0: 100% 1: 100% 0: 0.00 dB 1: 0.00 dB balance 0.00 base volume: 100% 0.00 dB volume steps: 65537 muted: no current latency: 0.00 ms max request: 0 KiB max rewind: 0 KiB monitor source: 0 sample spec: s16le 2ch 44100Hz channel map: front-left,front-right Stereo used by: 0 linked by: 0 configured latency: 0.00 ms; range is 0.50 .. 371.52 ms card: 0 <alsa_card.pci-0000_00_1b.0> module: 4 properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "ALC889A Analog" alsa.id = "ALC889A Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "HDA Intel" alsa.long_card_name = "HDA Intel at 0x9b500000 irq 46" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.name = "82801H (ICH8 Family) HD Audio Controller" device.form_factor = "internal" device.string = "front:0" device.buffering.buffer_size = "65536" device.buffering.fragment_size = "32768" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "Built-in Audio Analog Stereo" alsa.mixer_name = "Realtek ALC889A" alsa.components = "HDA:10ec0885,106b3a00,00100103" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" ports: analog-output-speaker: Speakers (priority 10000, available: unknown) properties: analog-output-headphones: Headphones (priority 9000, available: no) properties: active port: <analog-output-speaker> 2 and 3: Doesn't seem an permission issue, the sound is very far away (See opening paragraph). 4 thomas@thomas-pc:~$ sudo aplay -l **** List of PLAYBACK Hardware Devices **** Home directory /home/thomas not ours. card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC889A Digital [ALC889A Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 5 thomas@thomas-pc:~$ find /lib/modules/`uname -r` | grep snd /lib/modules/3.2.0-48-generic/kernel/sound/core/snd-hwdep.ko /lib/modules/3.2.0-48-generic/kernel/sound/core/snd-pcm.ko [.. huge lists continues ..] /lib/modules/3.2.0-48-generic/kernel/sound/pcmcia/pdaudiocf/snd-pdaudiocf.ko /lib/modules/3.2.0-48-generic/kernel/sound/pcmcia/vx/snd-vxpocket.ko thomas@thomas-pc:~$ 6 thomas@thomas-pc:~$ lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) Subsystem: Apple Inc. Device 00a4 Flags: bus master, fast devsel, latency 0, IRQ 46 Memory at 9b500000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 7 I guess it's supported. Linux mint and Xubuntu 13.04 had no trouble with sounds. Everything worked out of the box Thanks in advance Edit: alsa-info.sh output: WARNING: /etc/modprobe.d/alsa-base.conf line 45: ignoring bad line starting with 'amixer' ALSA Information Script v 0.4.62 -------------------------------- This script visits the following commands/files to collect diagnostic information about your ALSA installation and sound related hardware. dmesg lspci lsmod aplay amixer alsactl /proc/asound/ /sys/class/sound/ ~/.asoundrc (etc.) See './alsa-info.sh --help' for command line options. WARNING: /etc/modprobe.d/alsa-base.conf line 45: ignoring bad line starting with 'amixer' Automatically upload ALSA information to www.alsa-project.org? [y/N] : y Uploading information to www.alsa-project.org ... Done! Your ALSA information is located at http://www.alsa-project.org/db/?f=6cffc584284d4c0b266eb53249824ef83d6c4e3e Please inform the person helping you. thomas@thomas-pc:~$

    Read the article

  • Slow boot on Ubuntu 12.04

    - by Hailwood
    My Ubuntu is booting really slow (Windows is booting faster...). I am using Ubuntu a Dell Inspiron 1545 Pentium(R) Dual-Core CPU T4300 @ 2.10GHz, 4GB Ram, 500GB HDD running Ubuntu 12.04 with gnome-shell 3.4.1. After running dmesg the culprit seems to be this section, in particular the last three lines: [26.557659] ADDRCONF(NETDEV_UP): eth0: link is not ready [26.565414] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.355355] Console: switching to colour frame buffer device 170x48 [27.362346] fb0: radeondrmfb frame buffer device [27.362347] drm: registered panic notifier [27.362357] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0 [27.617435] init: udev-fallback-graphics main process (1049) terminated with status 1 [30.064481] init: plymouth-stop pre-start process (1500) terminated with status 1 [51.708241] CE: hpet increased min_delta_ns to 20113 nsec [59.448029] eth2: no IPv6 routers present But I have no idea how to start debugging this. sudo lshw -C video $ sudo lshw -C video *-display description: VGA compatible controller product: RV710 [Mobility Radeon HD 4300 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:48 memory:e0000000-efffffff ioport:de00(size=256) memory:f6df0000-f6dfffff memory:f6d00000-f6d1ffff After loading the propriety driver my new dmesg log is below (starting from the first major time gap): [2.983741] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [25.094327] ADDRCONF(NETDEV_UP): eth0: link is not ready [25.119737] udevd[520]: starting version 175 [25.167086] lp: driver loaded but no devices found [25.215341] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [25.215345] Disabling lock debugging due to kernel taint [25.231924] wmi: Mapper loaded [25.318414] lib80211: common routines for IEEE802.11 drivers [25.318418] lib80211_crypt: registered algorithm 'NULL' [25.331631] [fglrx] Maximum main memory to use for locked dma buffers: 3789 MBytes. [25.332095] [fglrx] vendor: 1002 device: 9552 count: 1 [25.334206] [fglrx] ioport: bar 1, base 0xde00, size: 0x100 [25.334229] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [25.334235] pci 0000:01:00.0: setting latency timer to 64 [25.337109] [fglrx] Kernel PAT support is enabled [25.337140] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [25.342803] Adding 4189180k swap on /dev/sda7. Priority:-1 extents:1 across:4189180k [25.364031] type=1400 audit(1338241723.027:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=606 comm="apparmor_parser" [25.364491] type=1400 audit(1338241723.031:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=606 comm="apparmor_parser" [25.364760] type=1400 audit(1338241723.031:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=606 comm="apparmor_parser" [25.394328] wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [25.394343] wl 0000:0c:00.0: setting latency timer to 64 [25.415531] acpi device:36: registered as cooling_device2 [25.416688] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:34/LNXVIDEO:00/input/input6 [25.416795] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [25.416865] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [25.425133] lib80211_crypt: registered algorithm 'TKIP' [25.448058] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [25.448321] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [25.448353] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [25.738867] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38 [25.761213] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [25.761406] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [25.783432] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [25.908318] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [25.928155] input: Dell WMI hotkeys as /devices/virtual/input/input9 [25.960561] udevd[543]: renamed network interface eth1 to eth2 [26.285688] init: failsafe main process (835) killed by TERM signal [26.396426] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input10 [26.423108] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input11 [26.511297] Bluetooth: Core ver 2.16 [26.511383] NET: Registered protocol family 31 [26.511385] Bluetooth: HCI device and connection manager initialized [26.511388] Bluetooth: HCI socket layer initialized [26.511391] Bluetooth: L2CAP socket layer initialized [26.512079] Bluetooth: SCO socket layer initialized [26.530164] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [26.530168] Bluetooth: BNEP filters: protocol multicast [26.553893] type=1400 audit(1338241724.219:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=928 comm="apparmor_parser" [26.554860] Bluetooth: RFCOMM TTY layer initialized [26.554866] Bluetooth: RFCOMM socket layer initialized [26.554868] Bluetooth: RFCOMM ver 1.11 [26.557910] type=1400 audit(1338241724.223:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=927 comm="apparmor_parser" [26.559166] type=1400 audit(1338241724.223:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=928 comm="apparmor_parser" [26.559574] type=1400 audit(1338241724.223:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=928 comm="apparmor_parser" [26.575519] type=1400 audit(1338241724.239:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=931 comm="apparmor_parser" [26.581100] type=1400 audit(1338241724.247:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=931 comm="apparmor_parser" [26.582794] type=1400 audit(1338241724.247:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=929 comm="apparmor_parser" [26.605672] ppdev: user-space parallel port driver [27.592475] sky2 0000:09:00.0: eth0: enabling interface [27.604329] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.606962] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.852509] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [27.852513] vesafb: scrolling: redraw [27.852515] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [27.852523] mtrr: type mismatch for e0000000,400000 old: write-back new: write-combining [27.852527] mtrr: type mismatch for e0000000,200000 old: write-back new: write-combining [27.852531] mtrr: type mismatch for e0000000,100000 old: write-back new: write-combining [27.852534] mtrr: type mismatch for e0000000,80000 old: write-back new: write-combining [27.852538] mtrr: type mismatch for e0000000,40000 old: write-back new: write-combining [27.852541] mtrr: type mismatch for e0000000,20000 old: write-back new: write-combining [27.852544] mtrr: type mismatch for e0000000,10000 old: write-back new: write-combining [27.852548] mtrr: type mismatch for e0000000,8000 old: write-back new: write-combining [27.852551] mtrr: type mismatch for e0000000,4000 old: write-back new: write-combining [27.852554] mtrr: type mismatch for e0000000,2000 old: write-back new: write-combining [27.852558] mtrr: type mismatch for e0000000,1000 old: write-back new: write-combining [27.853154] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005580000, using 3072k, total 3072k [27.853405] Console: switching to colour frame buffer device 128x48 [27.853426] fb0: VESA VGA frame buffer device [28.539800] fglrx_pci 0000:01:00.0: irq 48 for MSI/MSI-X [28.540552] [fglrx] Firegl kernel thread PID: 1168 [28.540679] [fglrx] Firegl kernel thread PID: 1169 [28.540789] [fglrx] Firegl kernel thread PID: 1170 [28.540932] [fglrx] IRQ 48 Enabled [29.845620] [fglrx] Gart USWC size:1236 M. [29.845624] [fglrx] Gart cacheable size:489 M. [29.845629] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [29.845632] [fglrx] Reserved FB block: Unshared offset:fc21000, size:3df000 [29.845635] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [59.700023] eth2: no IPv6 routers present

    Read the article

  • How to add and remove nested model fields dynamically using Haml and Formtastic

    - by Brightbyte8
    We've all seen the brilliant complex forms railscast where Ryan Bates explains how to dynamically add or remove nested objects within the parent object form using Javascript. Has anyone got any ideas about how these methods need to be modified so as to work with Haml Formtastic? To add some context here's a simplified version of the problem I'm currently facing: # Teacher form (which has nested subject forms) [from my application] - semantic_form_for(@teacher) do |form| - form.inputs do = form.input :first_name = form.input :surname = form.input :city = render 'subject_fields', :form => form = link_to_add_fields "Add Subject", form, :subjects # Individual Subject form partial [from my application] - form.fields_for :subjects do |ff| #subject_field = ff.input :name = ff.input :exam = ff.input :level = ff.hidden_field :_destroy = link_to_remove_fields "Remove Subject", ff # Application Helper (straight from Railscasts) def link_to_remove_fields(name, f) f.hidden_field(:_destroy) + link_to_function(name, "remove_fields(this)") end def link_to_add_fields(name, f, association) new_object = f.object.class.reflect_on_association(association).klass.new fields = f.fields_for(association, new_object, :child_index => "new_#{association}") do |builder| render(association.to_s.singularize + "_fields", :f => builder) end link_to_function(name, h("add_fields(this, \"#{association}\", \"#{escape_javascript(fields)} \")")) end #Application.js (straight from Railscasts) function remove_fields(link) { $(link).previous("input[type=hidden]").value = "1"; $(link).up(".fields").hide(); } function add_fields(link, association, content) { var new_id = new Date().getTime(); var regexp = new RegExp("new_" + association, "g") $(link).up().insert({ before: content.replace(regexp, new_id) }); } The problem with implementation seems to be with the javascript methods - the DOM tree of a Formtastic form differs greatly from a regular rails form. I've seen this question asked online a few times but haven't come across an answer yet - now you know that help will be appreciated by more than just me! Jack

    Read the article

  • Django custom managers - how do I return only objects created by the logged-in user?

    - by Tom Tom
    I want to overwrite the custom objects model manager to only return objects a specific user created. Admin users should still return all objects using the objects model manager. Now I have found an approach that could work. They propose to create your own middleware looking like this: #### myproject/middleware/threadlocals.py try: from threading import local except ImportError: # Python 2.3 compatibility from django.utils._threading_local import local _thread_locals = local() def get_current_user(): return getattr(_thread_locals, 'user', None) class ThreadLocals(object): """Middleware that gets various objects from the request object and saves them in thread local storage.""" def process_request(self, request): _thread_locals.user = getattr(request, 'user', None) #### end And in the Custom manager you could call the get_current_user() method to return only objects a specific user created. class UserContactManager(models.Manager): def get_query_set(self): return super(UserContactManager, self).get_query_set().filter(creator=get_current_user()) Is this a good approach to this use-case? Will this work? Or is this like "using a sledgehammer to crack a nut" ? ;-) Just using: Contact.objects.filter(created_by= user) in each view doesn`t look very neat to me. EDIT Do not use this middleware approach !!! use the approach stated by Jack M. below After a while of testing this approach behaved pretty strange and with this approach you mix up a global-state with a current request. Use the approach presented below. It is really easy and no need to hack around with the middleware. create a custom manager in your model with a function that expects the current user or any other user as an input. #in your models.py class HourRecordManager(models.Manager): def for_user(self, user): return self.get_query_set().filter(created_by=user) class HourRecord(models.Model): #Managers objects = HourRecordManager() #in vour view you can call the manager like this and get returned only the objects from the currently logged-in user. hr_set = HourRecord.objects.for_user(request.user)

    Read the article

  • Audio stream mangement in Linux

    - by User1
    I have a very complicated audio setup for a project. Here's what we have: 3 applications playing sound 2 applications recording sound 2 sound cards I really don't really have the code to any of these applications. All I want to do is monitor and control the audio streams. Here are a few examples of operations I'd like to do while the applications are running: Mute one of the incoming audio streams. Have one of the incoming audio streams do a "solo" (be the only stream that can "talk"). Get a graph (about 30 seconds worth) of the audio that each stream produced. Send one of the audio streams to soundcard #1, but all three audio streams to soundcard #2. I would likely switch audio streams every 2 minutes or so with one of the operations listed above. A GUI would be preferred. I started looking at the sound systems in Linux and it gets extremely complex and I feel like there have been many new advances in the past few years. I see jack, pulseaudio, artsd, and several other packages. They all have some promise but where should I start? Is there something someone already built that can help?

    Read the article

  • Rails - Logic for finding info from a :has_many :through needed!

    - by Jty.tan
    I have 3 relevant tables. User, Orders, and Viewables The idea is that each User has got many Orders, but at the same time, each User can View specific other Orders that belong to other Users. So Viewables has the attributes of user_id and order_id. Orders has a :has_many :Users, :through => :viewables Is it possible to do a find through an Order's view? So something like @viewable_orders = Orders.find(:all, :conditions = ["Viewable.user_id=?",1]) To get a list of Orders which are viewable by user_id=1. (This doesn't work, else I won't be asking. :( ) The idea being that I can do something like a sidebar where the current user (the logged-in one) can view a list of other people's orders that he can view. For example Three other Users who have some Orders that he can view should be eventually displayed like this: Jack (2) Basic Order (registry_id: 1) New Order (registry_id: 29) Amy (4) Short Order (registry_id: 12) Jill (5) Hardware Order (14) Pink Order (17) Software Order (76) (The number in brackets are the respective user_id or registry_id) So to find the list of all of the orders that the current user can find (assuming user_id of the current user is 1), would be found by doing @viewable_orders = Viewable.find(:all, :conditions => ["user_id=?", 1]) And that would give me the collection of the above 6 registries. Now, the easiest way to do this, is for me to just have a list of + Jill's Hardware Order + Jill's Pink Order + Amy's Short Order + etc But that gets ugly for long lists. Thanks!

    Read the article

  • ASP.NET RadioButton messing with the name (groupname)

    - by Hojou
    I got a templated control (a repeater) listing some text and other markup. Each item has a radiobutton associated with it, making it possible for the user to select ONE of the items created by the repeater. The repeater writes the radiobutton setting its id and name generated with the default asp.net naming convention making each radiobutton a full 'group'. This means all radiobuttons are independant on each other, which again unfortunately means i can select all radiobuttons at the same time. The radiobutton has the clever attribute 'groupname' used to set a common name so they get grouped together and thus should be dependant (so i can only select one at a time). The problem is - this doesn't work - the repeater makes sure the id and thus the name (which controls the grouping) are different. Since i use a repeater (could have been a listview or any other templated databound control) i can't use the RadioButtonList. So where does that leave me? I know i've had this problem before and solved it. I know almost every asp.net programmer must have had it too, so why can't i google and find a solid solution to the problem? I came across solutions to enforce the grouping by javascript (ugly!) or even to handle the radiobuttons as non-server controls, forcing me to do a Request.Form[name] to read the status. I also tried experimenting with overriding the name attribute on the PreRender event - unfortunately the owning page and masterpage again overrides this name to reflect the full id/name so i end up with the same wrong result. If you have no better solution than i posted, you are still very welcome to post your thoughts - atleast i'll know that my friend 'jack' is right about how messed up 'asp.net' is sometimes ;)

    Read the article

  • Getting Started with Ruby & Ruby on Rails

    - by JakeTheSnake
    Some background: I'm a jack-of-all traits, one of which is programming. I learned VB6 through Excel and PHP for creating websites and so far it's worked out just fine for me. I'm not CS major or even mathematically inclined - logic is what interests me. Current status: I'm willing to learn new and more powerful languages; my first foray into such a route is learning Ruby. I went to the main Ruby website and did the interactive intro. (by the way, I'm currently getting redirected to google.com when I try the link...it's happening to other websites as well...is my computer infected?) I liked what I learned and wanted to get started using Ruby to create websites. I downloaded InstantRails and installed it; everything so far has been fine - the program starts up just fine, and I can test some Ruby code in the console. However my troubles begin when I try and view a web page with Ruby code present. Lastly, my problem: As in PHP, I can browse to the .php file directly and through using PHP tags and some simple 'echo' statements I can be on my way in making dynamic web pages. However with the InstantRails app working, accessing a .rb or .rhtml page doesn't produce similar results. I made a simple text file named 'test.rb' and put basic HTML tags in there (html, head, body) and the Ruby tags <%= and % with some ruby code inside. The web page actually shows the tags and the code - as if it's all just plain HTML. I take it Ruby isn't parsing the page before it is displayed to the user, but this is where my lack of understanding of the Ruby environment stops me short. Where do I go from here?

    Read the article

  • Python: Networked IDLE?

    - by Rosarch
    Is there any existing web app that lets multiple users work with an interactive IDLE type session at once? Something like: IDLE 2.6.4 Morgan: >>> letters = list("abcdefg") Morgan: >>> # now, how would you iterate over letters? Jack: >>> for char in letters: print "char %s" % char char a char b char c char d char e char f char g Morgan: >>> # nice nice If not, I would like to create one. Is there some module I can use that simulates an interactive session? I'd want an interface like this: def class InteractiveSession(): ''' An interactive Python session ''' def putLine(line): ''' Evaluates line ''' pass def outputLines(): ''' A list of all lines that have been output by the session ''' pass def currentVars(): ''' A dictionary of currently defined variables and their values ''' pass (Although that last function would be more of an extra feature.) To formulate my problem another way: I'd like to create a new front end for IDLE. How can I do this?

    Read the article

  • MySQL: Request to select the last 10 send/received messages to/by different users

    - by Yako malin
    I want to select the 10 last messages you received OR you sent TO different users. For example the results must be shown like that: 1. John1 - last message received 04/17/10 3:12 2. Thomy - last message sent 04/16/10 1:26 3. Pamela - last message received 04/12/10 3:51 4. Freddy - last message received 03/28/10 9:00 5. Jack - last message sent 03/20/10 4:53 6. Tom - last message received 02/01/10 7:41 ..... Table looks like: CREATE TABLE `messages` ( `id` int(11) NOT NULL AUTO_INCREMENT, `time` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP, `sender` int(11) DEFAULT NULL, `receiver` int(11) DEFAULT NULL, `content` text ) I think Facebook (and the iPhone) use this solution. When you go to your mail box, you have the last messages received/sent grouped by Users (friends). So I will take an example. If I have theses messages (THEY ARE ORDERED YET): **Mike** **Tom** **Pam** Mike Mike **John** John Pam **Steve** **Bobby** Steve Steve Bobby Only Message with ** should be returned because they are the LAST messages I sent/received By User. In fact I want the last message of EACH discussion. What is the solution?

    Read the article

  • Alternate widgets and logic for ManyToManyField with Django forms

    - by Jaearess
    In my Django project, I have a simple ticket system. When creating a ticket, certain users have the ability to assign the ticket to other users, and to email the ticket to other users as well (this is used as an FYI for those users, so they're aware of the ticket, even though it's not assigned to them.) At the moment, the form for adding a ticket is simply the default Django form, with the "assigned_to" and "email_to" fields being ManyToManyFields, and therefore displayed as MultipleSelect widgets, each with a list of all users. Due to the relatively large number of users, and general awkwardness of the MultipleSelect widget, and alternate layout is now required. The desired layout is a pair of simple Select widgets side-by-side. The first has the option of "Assign to" or "Email to" and the second is a list of the users. Essentially, like this: [Assign to] [John Doe] [Email to] [Jane Roe] [Jack Smith], etc. Of course, since an arbitrary number of users can be assigned or emailed a ticket, there's a simple button that runs some Javascript to add another set of widgets, to allow the user to assign and email as many people as they need to. So far all of that is fairly simple and straight forward. However, the problem I have is using this widget setup/logic setup with Django forms. Instead of lists of users to assign to and email, instead we're getting back pairs of information, one a user and the other which list that user should be placed in. What I'm looking for, but have yet to find, is a way to offload the translation between how the user uses the form, and how Django understands the model to the form itself, so I don't have to manually do the processing of the data before passing it to the form in each place this form is used. Additionally, there's a review screen with the option to go back and change the form before submitting it, so a way to have the form translate both to and from this format would be extremely helpful.

    Read the article

  • error on connecting to the server : socket io is not defined

    - by max
    i know there's been couple of question about the same problem , i've already check them . i have very simple node.js chat app i have a server running on 8000 port and it works fine my client pages are html , they are running on apache and i'm using socket.io to connect them to the server and it works fine on the local host but when i upload the app on the server i keep on getting this error in the firebug io is not defined var socket = io.connect('http://atenak.com:8000/'); or sometimes it doesn't show that but when i try to broadcast message from cliend i get this error : socket is undefined socket.emit('msg', { data: msg , user:'max' }); the only difference is i've changed the localhost with atenak.com ! here is my html code var socket = io.connect('http://atenak.com:8000/'); var user = 'jack'; socket.on('newmsg', function (data) { if(data.user == user ) { $('#container').html(data.data); } }); function brodcast(){ var msg = $('#fild').val(); socket.emit('msg', { data: msg , user:'max' }); } </script> </head> <body> <div id="container"> </div> <input id="fild" type="text"> <input name="" type="button" onClick="brodcast();"> </body> i have included the sockt.io.js and server is running ok which means socket.io is installed on the server here is the live page http://atenak.com/client.html

    Read the article

  • "rsAccessDenied" error for SSRS 2008

    - by JackLocke
    Hi All, I have been trying to access SSRS Web Service URL hxxp://myServer:80/ReportServer (from Reporting Service Configuration Manager), but my IE always shows "rsAccessDenied" message saying that my account doesn't have privilage required to view. Here are my system specs. Its my laptop with Windows 7 x64, and SQL Server 2008 with SP1 and I am using Mixed Mode Authentication with My account as SysAdmin privilages and this is what I have been trying / tried ... (ofcourse with restarting the service everytime I make any change in configuration), I changed service account from Reporting Service Configuration Manager to make it use My account but nothing happend. I tried running my IE as admin, by RUN AS ADMIN but still same message. Then I read somewhere I have to delete/recreate my encryption keys as well, so I tried again with that, then it was asking me to enter ID/PWD to access server here I am totally blank because it was not accepting my account credentials !!!. Weird thing is I can see my existing reports if I follow this URL hxxp://myServer:80/Reports , for which My guess is solely used to view reports. I have read post here about kind of same problem, but it seems that OP just left forum after asking question... Also, MSDN does have these helps hxxp://msdn.microsoft.com/en-us/library/ms156034.aspx hxxp://msdn.microsoft.com/en-us/library/bb630430.aspx but both of this didn't workout for me. I will really appriciate it if any one can help me out. Jack p.s. I was not allowed to post more than 1 URL because of my "reputation" so I had to change the string a bit. Please replace hxxp wih http in URLs.

    Read the article

  • Accepts Nested Attributes For - edit form displays incorrect number of items ( + !map:ActiveSupport:

    - by Brightbyte8
    Hi, I have a teacher profile model which has many subjects (separate model). I want to add subjects to the profile on the same form for creating/editing a profile. I'm using accepts_nested_attributes for and this works fine for creation. However on the edit page I am getting a very strange error - instead of seeing 3 subjects (I added three at create and a look into the console confirms this), I see 12 subjects(!). #Profile model class Profile < ActiveRecord::Base has_many :subjects accepts_nested_attributes_for :subjects end #Subject Model class Subject < ActiveRecord::Base belongs_to :profile end #Profile Controller (only showing deviations from normal RESTFUL setup) def new @profile = Profile.new 3.times do @profile.subjects.build end end #Here's 1 of three parts of the subject output of = debug @profile errors: !ruby/object:ActiveRecord::Errors base: *id004 errors: !map:ActiveSupport::OrderedHash {} subjects: - &id001 !ruby/object:Subject attributes: exam: Either name: "7" created_at: 2010-04-15 10:38:13 updated_at: 2010-04-15 10:38:13 level: Either id: "31" profile_id: "3" attributes_cache: {} # Note that 3 of these attributes are displayed despite me seeing 12 subjects on screen Other info in case it's relevant. Rails: 2.3.5 Ruby 1.8.7 p149 HAML I've never had so much difficulty with a bug before - I've already lost about 8 hours to it. Would really appreciate any help! Thanks to any courageous takers Jack

    Read the article

< Previous Page | 45 46 47 48 49 50 51 52  | Next Page >