Search Results

Search found 1999 results on 80 pages for 'house lee'.

Page 49/80 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

• Sharing a printer on Windows home network

  - by Jeff

  I have a home network, and I'm trying to share a printer connected to one of the PCs. The wireless modem through which the internet comes through doesn't reach the entire house, so we have another router set up as well. The modem is 192.168.1.1 (let's call this A) and the router is set up as 192.168.1.100 (let's call this B). Subnet masks 255.255.255.0. The printer is hooked up to a PC on B. If my laptop is connected wirelessly to B, it can see the printer. However, if it's connected to A, it doesn't show up in My Network Places. How can I get it so that I can print to the printer regardless of whether the

  Read the article

• Can I use my Belkin router as a repeater?

  - by Kyle R

  I've got a brand new, unopened Belkin N600 DB router (yay 50% off sale), and I can't seem to figure out if I can use it as a repeater. As far as I can tell, it doesn't support DD-WRT or Tomato, but I'm wondering if there may be some way to rig it up to repeat Wifi. Also, I really need to know before I open it, because, being a bit tight on money at the moment, I'll probably sell it if I can't use it as a repeater. Finally, two caveats: I can't use the other wireless router for anything other than broadcasting straight from the modem (parents are paranoid about anything technological). I can't run ethernet to the second router due to the layout of the house. Thanks so much for the help everyone--if I'm being vague, tell me! EDIT: Also, the manual here is pretty useless on this topic as far as I can tell.

  Read the article

• Suggestions for hosted file sharing services

  - by Jon

  Before I pose my question, I will give some insight as per my scenario: I work for a small business (cost is an important factor) Our bandwidth is limited and would not support an in-house FTP server We need to share files (mostly pdf, inDesign, Illustrator documents) to our clients, and as we expand, we are finding that our current locally-hosted FTP solution is too slow and is becoming a detriment to our sales team. What we need is a remotely hosted solution to share files with our clients, specifically with the following features: Greater than 100gb of secure storage The Ability to distribute unique log in credentials to clients, granting access to a personalized directory or folder, while limiting access to other files on the server. A relatively simple web-based UI for clients with limited computer knowledge We have considered a dedicated remote server, and web-based services (box.net, yousendit.com, onehub.com, filesanywhere.com) but I am unsure as per the direction we should be taking - have I left another solution out? What would you suggest? Thanks in advance.

  Read the article

• Is there a way to watch EyeTV in alarm-clock style "sleep" mode on your iMac?

  - by Mark S.

  My wife likes to watch TV to go to sleep, the only trouble is that the only TV we have in our house is the iMac with the EyeTV Hybrid. I'd like to have the TV turn off after 1.5 hours of watching without changing the channels/volume--sortof like an alarm clock 'sleep' function. Do you know of a way to do this either with an EyeTV plugin or an App that might be able to try to detect such conditions and shut down the display? Right now EyeTV overrides the screensaver. The Power saver functions don't really work because she doesn't start watching at the same time every night and periodically she will want to record a 2 or 3 AM show. All I want to do is "close" (but not quit) EyeTV and shut off the display.

  Read the article

• Linux - Network Sharing a local NTFS usb drive

  - by Jonathan Rioux

  I have an external hard drive formated in NTFS which I would like to be able to access by the network. I want to make a network share out of it. I also have a Debian machine running in my house and I then got an idea. I want to plug in my external hard drive (usb) into my Debian machine, and make a windows share with it, maybe with Samba, so I will be able to access it from my Windows 7 laptop and see it as a network share. Additionally, how can I restrict specific folders of that network share, and allow only specific folders to specific users? For instance, I would like to give my girlfriend access to a folder of her name so she can put her files and so she wont be able to see the stuff in my folder...

  Read the article

• Unable to access my own websites from our home

  - by user2521866

  Not sure if this is the right place to ask, but i'm gonna have a shot at it. I host a couple of websites with a webhost in the Netherlands. For a couple of days now, i've been unable to connect to them from my home network. When using tracert in the cmd screen, i'm getting a timeout after about 4-5 hops. It seems fine accessing the website from anywhere, except my home network. Other PC's around the house also fail to open the websites. I've tried 'flushing my DNS' as seen in some other topics, but to no avail just yet. One of the websites: http://bit.ly/1hbqs4J I've contacted my host about it as well, but no response yet. Trying to take control of the situation myself now for as much as I can. Regards, Dave

  Read the article

• how to restore windows 7 to a know working state every time it boots

  - by Artanis

  A couple of days ago my mother asked me to set up a computer at his house, she wants to use it to basic web browsing, video chat and nothing more. The problem is, neither my mother nor my sister know anything about using or maintaining a computer. What I want is to have a working base install of windows 7 and just discard everything installed, downloaded, ... when it reboots. That way I can set up a partition just for saving files and whatever they do the computer will always return to a working state at start up. can that be done? PS: Sadly linux is not an option since my sister wants to be able to play some games with my steam account and not all of them run with wine.

  Read the article

• Time Capsule + Ubee Router?

  - by Charlie

  I can't for the life of me figure this out. I recently had TWC installed in my house, and wanted to disable the NAT and router functions of it. I have a Time Capsule hooked up to it from LAN1 (on the Ubee) to the WAN port on the TC. The problems started occurring here. I figured the settings would be these: Ubee Configuration mode: Bridge DHCP: Off TC IPv4: 192.168.100.2 Subnet Mask: 255.255.255.0 Router Address: 192.168.100.1 DNS Servers: 8.8.8.8, 8.8.4.4 Router Mode: DHCP and NAT But using those settings, my TC says "Double NAT", so I have to change it all around to the default settings of the Ubee using NAT. This leads me to believe bridge mode doesn't actually turn off NAT...

  Read the article

• Redirecting and Remapping with mod_rewrite

  - by Droid646197

  First of all, am new to doing back-end server admin.. I have a main website being served on at certain IP. I have a blog address that lives on another IP, which was used on wordpress.com. When a user typed in blog.domain.com it would resolve to the Wordpress.com site. Since coming on board (two months) they wanted me to bring the blog in house. So, I set up a wordpress install at domain.com/blog. I would like blog.domain.com (different ip) to resolve to domain.com/blog but still using blog.domain.com is this possible with Apache and mod_rewrite?

  Read the article

• Solaris 11 installed, no updates?

  - by Paul De Niro

  I was messing around with solaris and decided to give Solaris 11 a try so I downloaded it from the Oracle website. After installing the OS, I went into the package manager and did an update. It told me that there were to available updates! I find this hard to believe considering that it's running a vulnerable version of firefox and java, its own in-house software product! Many of the other software products that came with the default install are also out of date and vulnerable. Is this normal for an Oracle install, or did I do something wrong with the upgrade process? I typed "pkg update" at the prompt, and I noticed that it did call out to pkg.oracle.com looking for updates. I find it bizarre that there are no updates available for an OS that was released a couple months ago with vulnerable software...

  Read the article

• Advice for an EC2 Architecture and Deployment Strategy

  - by Mark

  My company is currently migrating several websites and PHP web applications (standard LAMP stack) from three in-house servers to Amazon EC2. Because we had only three servers, we clustered several low-traffic websites with perhaps one high-traffic web application, and served them from the same server. The server admin has pretty much copied the previous architecture wholesale onto the EC2 instances, simply upping the instance size to account for the highest traffic client that occupies that particular instance. This architecture might be okay if it wasn't for deployment. Any time one of these sites/apps changes, it means redeploying the entire instance, along with the 30 sites/apps it hosts, instead of just updating one. How can we architect our cloud in a more modular fashion? Should each app get its own appropriately-sized instance? What is the best strategy for deployment in this type of situation?

  Read the article

• What is causing my wireless problems?

  - by user34629

  I have a Dell XPS M1330, since I moved to my new house, the wireless barely works on it, my housemates report no problems, so I guess it's something to do with my laptop. It's eratic in normal mode, sometimes not working for days, usually working on-and-off, forcing me to reload pages a few times before they work, etc. It works perfectly in safe mode, the driver I'm using is the Intel PRO/Wireless 3945ABG Network Connection, version 12.4.4.5, with a date at 26/10/2009, the most recent one I could find, bluetooth is not enabled, and I'm running Vista 32-bit Home Premium, which it shipped with. I also tried disabling IPv6 and resetting the IP stack, both to no avail. Can anybody help me?

  Read the article

• Wireless adapter won't enable

  - by user52141

  I bought a d-link dwa-125, plugged it in and windows recognized it right away and said everything was good to go. But there were no connection options. When I open up the network control panel and have it show me the adapters... the wireless adapter is greyed out and says it is disabled. So I tell it to enable. It says is it enabling, then says it is enabled... but the adapter stayed greyed out saying disabled. I am running 7 x64. I have reinstalled drivers, connected it via lan and had it update drivers.. same problem. It works just fine on any other computer in the house, just not this one.

  Read the article

• Economical way to get many harddrives into rack mount?

  - by Industrial

  Hi everyone, Please bear with me as being a bit of a newcomer at 19" rack-mounted equipment. I've thought a fair bit lately about the best way of getting 4x or 6x of 2.5" hard drives into my rack and are right now currently slightly confused about would be the best (economical) solution. After scouting the market, I've found this type of disk array units that offers built in RAID and a lot of drive slots and a truckload of geek cred, but at a price that just isn't going to fit in my budget. I've also found these type of cute adapters that takes two 2.5" drives in one 3.5" slot, but I will obviously need a chassie with a lot of 3.5" spaces in order to make it work. So what is the most economical way to house my harddrives in my rack?

  Read the article

• What's a good box to serve files on my local network, cross platform?

  - by rogpeppe

  I've installed CAT5e cable and gigabit switches in my house with the goal of having an "always-on" file server in the loft, accessible to both my macbook and my partner's Windows box. I'd like to find a solution which: uses minimal power. allows me to access as much disk bandwidth as possible. provides glitch-free file access to both MacOS and Windows. is as cheap as possible, while remaining reliable. Optional, but desirable extras: software or hardware RAID; open source solutions. A SheevaPlug with eSATA seems one possibility, but I'm sure there are any number of other good options.

  Read the article

• Create a home virtual network

  - by Tom Lisc

  I can't seem to get answers to this question. I want to setup up 2-3 computers in my house to run Linux based virtual machines fed from my dedicated Arch Linux server. I need them to have full sound and video support. At my workplace we use VMware (View), but that is too cost prohibited for me to deploy for my wife and the two 10 year olds. I have tried Virtualbox machines and they are fine, but I cannot get sound working. Any help/hints would be greatly appreciated.

  Read the article

• How to backup data from linux servers to linux server (incremental + snapshot)?

  - by wag2639

  We have a handful of hosted servers running RHEL4 and RHEL5 and would like to backup some key folders (I'm thinking /var /srv and /etc) to a local server we have in house. The local server is running Ubuntu 9.10 Server edition. I'm looking for a free (preferably OSS) way to grab (or push) incremental backups to my local server and once a month or so, make a new snapshot for incremental updates in between snapshots. Also, while I'm comfortable with using a command line, others may need to use the system in the future, and I would like some kind of graphical or web interface to browse the backup repository. Suggestions?

  Read the article

• How to backup data from linux servers to linux server (incremental + snapshot)?

  - by wag2639

  We have a handful of hosted servers running RHEL4 and RHEL5 and would like to backup some key folders (I'm thinking /var /srv and /etc) to a local server we have in house. The local server is running Ubuntu 9.10 Server edition. I'm looking for a free (preferably OSS) way to grab (or push) incremental backups to my local server and once a month or so, make a new snapshot for incremental updates in between snapshots. Also, while I'm comfortable with using a command line, others may need to use the system in the future, and I would like some kind of graphical or web interface to browse the backup repository. Suggestions?

  Read the article

• No wireless adapter in msi u200

  - by Mino Marimat

  I have a MSi u200, and the weird thing was that I was using this normally before, then after a few minutes all of a sudden it couldn't find the wifi signal from my house. I did some troubleshooting and a bit of search in the control panel, and it seems like my hardware is missing. :( I can't even turn on the wireless light using Fn+F8, so my suspicions about the missing hardware strengthened. I tried searching for DIY fixes, but I found out that the wireless card is actually built-in deeper, unlike the RAM cards and the hard drive where you can either replace or add more cards. What do I do?? As of the moment, I can get connected to my wifi here at home using a wireless adapter via usb, and it's working. So my guess about the hardware problem seems correct. HELP!!! Thanks!

  Read the article

• High Availability Clustering and Virtualization

  - by tmcallaghan

  I'm trying to understand how the various virtualization vendors (specifically Amazon EC2, but also VMware and Xen) enable software vendors to provide a real HA solution in the environment where the servers are virtualized. Specifically, if I'm running any HA application (exchange, databases, etc) I need to ensure that my redundant virtual "servers" aren't located on the same physical server. Using in-house virtualization solutions (VMware, Xen, etc) I can provision accordingly as well as check the virtual - physical arrangement. I could, however, accidentally "vmotion" to the same physical hardware. With EC2, I don't even have the ability at provision time to select different physical servers. Since their Cluster Compute Instances are 1 virtual server per physical server it seems to be the only way to guarantee I don't have a false sense of redundancy. Any ideas or thoughts would be helpful. What are others doing about this problem? If the vendors provided an API where I could get something as simple as a unique physical system identifier I could at least know if I'm going to have an issue. -Tim

  Read the article

• Synced audio ouput on multiple machines? VLC? hardware solutions?

  - by zimmer62

  I'm wondering if there is any software or hardware solutions to synced audio or audio and video across multiple computers or devices on a network. I've seen Sonos, and it might be a good solution, but it's also a very expensive solution. I'd like to be able to play something with realtime audio output on one PC, but hear it on speakers throughout the house, being it the home theater receiver, or another computer in another room. I saw a solution using the apple iport express, but the latency was unacceptable for anything other than just music. I'd like to avoid running audio wires with baluns to a bunch of amplifiers scattered all over the place when I have cat5 run everywhere. Is anyone familiar with using this kind of process for whole home audio? The latency is a big deal for me, if I've got video attached to the sound (e.g. watching a hockey game)

  Read the article

• What are the most likely reasons an application would fail on only one of my servers?

  - by Rising Star

  I have several servers to test new code on. I primarily push out asp.NET web applications. Last week, I had an issue where I installed a newly developed web application on three servers. The three servers all run in separate environments. The application worked fine on two of them, but consistently crashed on the third server with each web request. The problem was eventually traced to an in-house developed .dll file being out of date on the third server. I'm certain that this kind of thing happens all the time. However, there are numerous things that could go wrong to cause this kind of behavior. I spent quite a bit of time tracing this problem. I would like to make a list of things to be suspicious of next time this happens. What are the most likely reasons that a web application would crash on one of my servers while identical code runs fine on another server?

  Read the article

• minimum required bandwidth for remote database server

  - by user66734

  I want to build a small warehousing application for my company. We have a central warehouse which distributes to 8 sales points across the country. They insist on an in-house solution. I am thinking to setup a central mySQL db Linux server and have the branches connect to it to store sales. Queries to the db from the branches will be minimum, maybe 10 per hour. However I need all the branches to be able to store each sale data ( product ID, customer ID ) in the central db at peak time at most once every five minutes. My question is can I get away with simple 24mbps/768kbps DSL lines? If not what is the bandwith requirement? Can I rely on a load balancing router to combine additional lines if needed? Can you propose some server hardware specs?

  Read the article

• Move email off Small Business Server to Google Apps, retain other SBS functions?

  - by Paul S.

  Recently, an in-house Microsoft Small Business Server 2011 was installed where I work. Unfortunately, our buildings have a bad electrical power supply and we suffer frequent outages. We have a large percentage of staff working off-site. Now when the power goes off here, everyone everywhere loses email functionality. I have been assigned to research the possibility of routing our email to Google Apps while maintaining LAN functions on the SBS. I haven't worked with Microsoft products for several years now, so do not know how SBS is structured. Can anyone here tell me if this is possible, or point me to good resources that explain our options?

  Read the article

• Windows failover cluster - virtual node with multiple Client Access Names

  - by mclaassen

  I recently encountered a customer environment in which they had failover cluster where one of the virtual nodes had more than one 'Client Access Name' (i.e. more than one IP address and DNS name for the single virtual node). Long story short we had to modify our software to deal with this situation, but we want to recreate the situation in house to test it before releasing. I have been unable to locate any information about how or why you would end up with a virtual node that has more than one access name. Does anyone know how I can set up a Windows failover cluster where a virtual node has more than one access name/IP?

  Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >