Search Results

Search found 21248 results on 850 pages for 'network planning'.

Page 49/850 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

  • Windows Server Hyper-V guests cannot see each other on network

    - by Noldorin
    I have a Hyper-V physical machine along with two standard laptops running within my LAN (connected by an ASUS-RT56U router). The physical server runs Windows Hyper-V Server 2008 R2, with two Windows Server 2008 R2 (full) guest VMs installed and running within. Both laptops run Windows 7. All OSs are 64-bit. Opening up Network in Windows Explorer on either of the two laptops displays both of the laptops in the LAN fine. However, neither of the guest VMs on the server (nor the host itself) are displayed. Indeed, the guest VMs can not see each other in Network view either. I can ping all computers (laptops and servers) without problems from within the LAN, but all of the servers are simply not visible from anywhere. In addition, the Network Map screen (accessible via Network and Sharing centre) gives me an error message: "An error happened during the mapping process." And I'm suspecting this might have something to do with how LLTP (Link Layer Topology Protocol) is working on the network. Worth noting though is that before my server was on the network, the Network Map screen displayed fine (as far as I can remember).

    Read the article

  • Windows Server Hyper-V guests cannot see each other on network

    - by Noldorin
    I have a Hyper-V physical machine along with two standard laptops running within my LAN (connected by an ASUS-RT56U router). The physical server runs Windows Hyper-V Server 2008 R2, with two Windows Server 2008 R2 (full) guest VMs installed and running within. Both laptops run Windows 7. All OSs are 64-bit. Opening up Network in Windows Explorer on either of the two laptops displays both of the laptops in the LAN fine. However, neither of the guest VMs on the server (nor the host itself) are displayed. Indeed, the guest VMs can not see each other in Network view either. I can ping all computers (laptops and servers) without problems from within the LAN, but all of the servers are simply not visible from anywhere. In addition, the Network Map screen (accessible via Network and Sharing centre) gives me an error message: "An error happened during the mapping process." And I'm suspecting this might have something to do with how LLTP (Link Layer Topology Protocol) is working on the network. Worth noting though is that before my server was on the network, the Network Map screen displayed fine (as far as I can remember).

    Read the article

  • Random Page Cost and Planning

    - by Dave Jarvis
    A query (see below) that extracts climate data from weather stations within a given radius of a city using the dates for which those weather stations actually have data. The query uses the table's only index, rather effectively: CREATE UNIQUE INDEX measurement_001_stc_idx ON climate.measurement_001 USING btree (station_id, taken, category_id); Reducing the server's configuration value for random_page_cost from 2.0 to 1.1 had a massive performance improvement for the given range (nearly an order of magnitude) because it suggested to PostgreSQL that it should use the index. While the results now return in 5 seconds (down from ~85 seconds), problematic lines remain. Bumping the query's end date by a single year causes a full table scan: sc.taken_start >= '1900-01-01'::date AND sc.taken_end <= '1997-12-31'::date AND How do I persuade PostgreSQL to use the indexes regardless of years between the two dates? (A full table scan against 43 million rows is probably not the best plan.) Find the EXPLAIN ANALYSE results below the query. Thank you! Query SELECT extract(YEAR FROM m.taken) AS year, avg(m.amount) AS amount FROM climate.city c, climate.station s, climate.station_category sc, climate.measurement m WHERE c.id = 5182 AND earth_distance( ll_to_earth(c.latitude_decimal,c.longitude_decimal), ll_to_earth(s.latitude_decimal,s.longitude_decimal)) / 1000 <= 30 AND s.elevation BETWEEN 0 AND 3000 AND s.applicable = TRUE AND sc.station_id = s.id AND sc.category_id = 1 AND sc.taken_start >= '1900-01-01'::date AND sc.taken_end <= '1996-12-31'::date AND m.station_id = s.id AND m.taken BETWEEN sc.taken_start AND sc.taken_end AND m.category_id = sc.category_id GROUP BY extract(YEAR FROM m.taken) ORDER BY extract(YEAR FROM m.taken) 1900 to 1996: Index "Sort (cost=1348597.71..1348598.21 rows=200 width=12) (actual time=2268.929..2268.935 rows=92 loops=1)" " Sort Key: (date_part('year'::text, (m.taken)::timestamp without time zone))" " Sort Method: quicksort Memory: 32kB" " -> HashAggregate (cost=1348586.56..1348590.06 rows=200 width=12) (actual time=2268.829..2268.886 rows=92 loops=1)" " -> Nested Loop (cost=0.00..1344864.01 rows=744510 width=12) (actual time=0.807..2084.206 rows=134893 loops=1)" " Join Filter: ((m.taken >= sc.taken_start) AND (m.taken <= sc.taken_end) AND (sc.station_id = m.station_id))" " -> Nested Loop (cost=0.00..12755.07 rows=1220 width=18) (actual time=0.502..521.937 rows=23 loops=1)" " Join Filter: ((sec_to_gc(cube_distance((ll_to_earth((c.latitude_decimal)::double precision, (c.longitude_decimal)::double precision))::cube, (ll_to_earth((s.latitude_decimal)::double precision, (s.longitude_decimal)::double precision))::cube)) / 1000::double precision) <= 30::double precision)" " -> Index Scan using city_pkey1 on city c (cost=0.00..2.47 rows=1 width=16) (actual time=0.014..0.015 rows=1 loops=1)" " Index Cond: (id = 5182)" " -> Nested Loop (cost=0.00..9907.73 rows=3659 width=34) (actual time=0.014..28.937 rows=3458 loops=1)" " -> Seq Scan on station_category sc (cost=0.00..970.20 rows=3659 width=14) (actual time=0.008..10.947 rows=3458 loops=1)" " Filter: ((taken_start >= '1900-01-01'::date) AND (taken_end <= '1996-12-31'::date) AND (category_id = 1))" " -> Index Scan using station_pkey1 on station s (cost=0.00..2.43 rows=1 width=20) (actual time=0.004..0.004 rows=1 loops=3458)" " Index Cond: (s.id = sc.station_id)" " Filter: (s.applicable AND (s.elevation >= 0) AND (s.elevation <= 3000))" " -> Append (cost=0.00..1072.27 rows=947 width=18) (actual time=6.996..63.199 rows=5865 loops=23)" " -> Seq Scan on measurement m (cost=0.00..25.00 rows=6 width=22) (actual time=0.000..0.000 rows=0 loops=23)" " Filter: (m.category_id = 1)" " -> Bitmap Heap Scan on measurement_001 m (cost=20.79..1047.27 rows=941 width=18) (actual time=6.995..62.390 rows=5865 loops=23)" " Recheck Cond: ((m.station_id = sc.station_id) AND (m.taken >= sc.taken_start) AND (m.taken <= sc.taken_end) AND (m.category_id = 1))" " -> Bitmap Index Scan on measurement_001_stc_idx (cost=0.00..20.55 rows=941 width=0) (actual time=5.775..5.775 rows=5865 loops=23)" " Index Cond: ((m.station_id = sc.station_id) AND (m.taken >= sc.taken_start) AND (m.taken <= sc.taken_end) AND (m.category_id = 1))" "Total runtime: 2269.264 ms" 1900 to 1997: Full Table Scan "Sort (cost=1370192.26..1370192.76 rows=200 width=12) (actual time=86165.797..86165.809 rows=94 loops=1)" " Sort Key: (date_part('year'::text, (m.taken)::timestamp without time zone))" " Sort Method: quicksort Memory: 32kB" " -> HashAggregate (cost=1370181.12..1370184.62 rows=200 width=12) (actual time=86165.654..86165.736 rows=94 loops=1)" " -> Hash Join (cost=4293.60..1366355.81 rows=765061 width=12) (actual time=534.786..85920.007 rows=139721 loops=1)" " Hash Cond: (m.station_id = sc.station_id)" " Join Filter: ((m.taken >= sc.taken_start) AND (m.taken <= sc.taken_end))" " -> Append (cost=0.00..867005.80 rows=43670150 width=18) (actual time=0.009..79202.329 rows=43670079 loops=1)" " -> Seq Scan on measurement m (cost=0.00..25.00 rows=6 width=22) (actual time=0.001..0.001 rows=0 loops=1)" " Filter: (category_id = 1)" " -> Seq Scan on measurement_001 m (cost=0.00..866980.80 rows=43670144 width=18) (actual time=0.008..73312.008 rows=43670079 loops=1)" " Filter: (category_id = 1)" " -> Hash (cost=4277.93..4277.93 rows=1253 width=18) (actual time=534.704..534.704 rows=25 loops=1)" " -> Nested Loop (cost=847.87..4277.93 rows=1253 width=18) (actual time=415.837..534.682 rows=25 loops=1)" " Join Filter: ((sec_to_gc(cube_distance((ll_to_earth((c.latitude_decimal)::double precision, (c.longitude_decimal)::double precision))::cube, (ll_to_earth((s.latitude_decimal)::double precision, (s.longitude_decimal)::double precision))::cube)) / 1000::double precision) <= 30::double precision)" " -> Index Scan using city_pkey1 on city c (cost=0.00..2.47 rows=1 width=16) (actual time=0.012..0.014 rows=1 loops=1)" " Index Cond: (id = 5182)" " -> Hash Join (cost=847.87..1352.07 rows=3760 width=34) (actual time=6.427..35.107 rows=3552 loops=1)" " Hash Cond: (s.id = sc.station_id)" " -> Seq Scan on station s (cost=0.00..367.25 rows=7948 width=20) (actual time=0.004..23.529 rows=7949 loops=1)" " Filter: (applicable AND (elevation >= 0) AND (elevation <= 3000))" " -> Hash (cost=800.87..800.87 rows=3760 width=14) (actual time=6.416..6.416 rows=3552 loops=1)" " -> Bitmap Heap Scan on station_category sc (cost=430.29..800.87 rows=3760 width=14) (actual time=2.316..5.353 rows=3552 loops=1)" " Recheck Cond: (category_id = 1)" " Filter: ((taken_start >= '1900-01-01'::date) AND (taken_end <= '1997-12-31'::date))" " -> Bitmap Index Scan on station_category_station_category_idx (cost=0.00..429.35 rows=6376 width=0) (actual time=2.268..2.268 rows=6339 loops=1)" " Index Cond: (category_id = 1)" "Total runtime: 86165.936 ms"

    Read the article

  • How can one setup a version control system on a local network, without a server?

    - by Andrew
    Edit: Ok so I learned that I guess I need an distributed source control, however are there any UI based ones, and do they allow you to merge with other users on the network? This is kind of a two part question, so here it goes. I want to start developing a web application at home (with multiple developers). However, I don't have a dedicated server nor want to pay for on. So first, I don't know which version control system to use for this case, as at work we mostly have TFS setup, so I am not to familiar with whats out there. What are the best free CVS/SVN tools out there? Second, is it possible to somehow setup the CVS/SVN where there is no dedicated server and both clients store up to one week of the source code from the last check-in? Also, it would be helpful if it could integrate with visual studio, again this isn't that important at all. Problem: There are Five users, one is a Server. Server Connected: All Ok Server Disconnected: No one can share. What I am looking for: No Server: Users still have versioning based on version id of last check-in. Users must check all version on network to make sure they aren't outdated based on their last version id. If not check-in, otherwise merge/get latest. If they are update checkin, and set current version id +1.

    Read the article

  • Git repo planning questions

    - by masonk
    At work, development uses perforce to handle code sharing. I won't say "revision control", because we aren't allowed to check in changes until they are ready for regression testing. In order to get my personal change sets under revision control, I've been given the go-ahead to build my own git and initialize the client view of the perforce depot as a git repo. There are some difficulties in doing this, however. The client view lives in a subfolder of ~, (~/p4), and I want to put ~ under revision control as well, with its own separate history. I can't figure out how to keep the history for ~ separate from ~/p4 without using a submodule. The problem with a submodule is that it looks like I have to go make a repository that will become the submodule and then git submodule add <repo> <path>. But there is nowhere to make the submodule's repository except in ~. There seems to be no safe place to create the initial client view of the depot with git p4 clone. (I'm working off of the assumption that initing or cloning a repo into a subdirectory of a git repo is not supported. At least, I can find nothing authoritative on nested git repos.) edit: Is merely ignoring ~/p4 in the repo rooted at ~ enough to allow me to init a nested repo in ~/p4? My __git_ps1 function still thinks I'm in a git repository when I visit an ignored subdirectory of a git repo, so I'm inclined to think not. I need the "remote" repository created by git p4 sync to be a branch in ~/p4. We are required to keep all of our code in ~/p4 so that it doesn't get backed up. Can I pull from a "remote" branch that is really a local branch? This one is just for convenience, but I thought I could learn something by asking it. For 99% of the project, I just want to start the with the p4 head revision as the inital commit object. For the other 1%, I would like to suck down the entire p4 history so that I can browse it in git. IOW, after I'm done initalizing it, the initial commit of remotes/p4/master branch will contain: revision 1 of //depot/prod/Foo/Bar/* revision X of other files in //depot/prod/*, where X is the head revision and the remotes/p4/master branch contains Y commits, where Y is the number of changelists that had a file in //depot/prod/Foo/Bar/*, with each commit in the history corresponding to one of those p4 changelists, and HEAD looking like p4's head.

    Read the article

  • Windows XP can't connect to wireless network

    - by mikez302
    I have a desktop computer with a wireless card, running Windows XP SP3. For a little while, I had a remote network connection set up for my job, but I didn't need the remote connection so I deleted it. Now, I am unable to connect to the internet at all from that computer through my wireless router. I can connect through my router using my laptop, and I can connect through my neighbor's router using my desktop, but for some reason I can't connect through my own router using my desktop. I see the "Wireless Network Connection 5" icon in my system tray, but it tells me it is not connected. When I click on the icon, I see a list of wireless networks, including my own, which is set up to automatically connect, although it doesn't. When I try to connect to my network on my own (by clicking on it, then clicking "Connect"), it asks me for my network password like it usually does. I see a box come up saying "Waiting for network to be ready..." and it hangs there. On the list of wireless networks, my network says "Acquiring network address" but it doesn't actually connect. How can I fix this? I tried rebooting my computer, repairing my connection, and restarting my router, and I am still having this problem.

    Read the article

  • How do I disable the network connection from .Net without needing admin priveledges?

    - by Brad Mathews
    I may be SOL on this but I thought I would give throw it out for possible solutions. I am writing a computer access control service to help me control my kids' computer use. Plan on open sourcing it when I have it working. It is written in VB.Net and needs to work on XP through 7. I am running into all sorts of security and desktop access issues on Windows 7. The service needs to run as admin to execute the NetSh command to disable the network. But I cannot interact with the desktop from the service so I IPC to a UI to handle other stuff, but I still cannot detect from the service if the desktop is locked. Argghh! I could get it all working from a hidden windows form app if I could just lick the one piece that needs admin permissions: disabling the network. It does no good if a kid logs on and denies the popup asking if the program should run as administrator and he says no. Also windows 7 will not start a program set to run as admin using HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run Anyone know how to get this working? Or have an outside the box solution? Thanks! Brad

    Read the article

  • Virtual Machine Network Architecture, Isolating Public and Private Networks

    - by Mark
    I'm looking for some insight into best practices for network traffic isolation within a virtual environment, specifically under VMWARE ESXi. Currently I have (in testing) 1 hardware server running ESXi but i expect to expand this to multiple pieces of hardware. The current setup is as follows: 1 pfsense VM, this VM accepts all outside (WAN/internet) traffic and performs firewall/port forwarding/NAT functionality. I have multiple public IP addresses sent to the this VM that are used for access to individual servers (via per incoming IP port forwarding rules). This VM is attached to the private (virtual) network that all other VMs are on. It also manages a VPN link into the private network with some access restrictions. This isn't the perimeter firewall but rather the firewall for this virtual pool only. I have 3 VMs that communicate with each other, as well as have some public access requirements: 1 LAMP server running an eCommerce site, public internet accessible 1 accounting server, access via windows server 2008 RDS services for remote access by users 1 inventory/warehouse management server, VPN to client terminals in warehouses These servers constantly talk with each other for data synchronization. Currently all the servers are on the same subnet/virtual network and connected to the internet through the pfsense VM. The pfsense firewall uses port forwarding and NAT to allow outside access to the servers for services and for server access to the internet. My main question is this: Is there a security benefit to adding a second virtual network adapter to each server and controlling traffic such that all server to server communication is on one separate virtual network, while any access to the outside world is routed through the other network adapter, through the firewall, and on the the internet. This is the type of architecture i would use if these were all physical servers, but i'm unsure if the networks being virtual changes the way i should approach locking down this system. Thank you for any thoughts or direction to any appropriate literature.

    Read the article

  • Adding a Printer to my Print Server Failing

    - by Rudi Kershaw
    So, on the Windows Server page I read the following. Step 4: Add Network Printers Automatically Print Management (Printmanagement.msc) can automatically detect all the printers that are located on the same subnet as the computer on which you are running Print Management, install the appropriate printer drivers, set up the queues, and share the printers. To automatically add network printers to a printer server Open the Administrative Tools folder, and then double-click Print Management. In the Printer Management tree, right-click the appropriate server, and then click Add Printer. On the Printer Installation page of the Network Printer Installation Wizard, click Search the network for printers, and then click Next. If prompted, specify which driver to install for the printer. So, I have got to this point, made sure the printer (Canon MP620) is on and correctly plugged into the network. However, when I click "Search the network for printers", the wizard doesn't find it. Now, I can't get any further. Is there anything I could be doing wrong? How should I proceed moving forwards?

    Read the article

  • Is it possible to change an "Unidentified Network" into a "Home" or "Work" network on Windows 7

    - by Rhys
    I have a problem with Windows 7 RC (7100). I frequently use a crossover network cable on WinXP with static IP addresses to connect to various industrial devices (e.g. robots, pumps, valves or even other Windows PCs) that have Ethernet network ports. When I do this on Windows 7, the network connection is classed as an "Unidentified Network" in Networks and Sharing Center and the public firewall profile is enforced by Windows. I do not want to change the public profile and would prefer to use the Home or Work profile instead. For other networks like Home and Work I'm able to click on them and change the classification. This is not available for unidentified networks. My questions are these:- Is there a way to manual override the "Unidentified Network" classification? What tests are performed on the network that fail, therefore classifying it as an "Unidentified Network" By googling (hitting mainly vista issues) it seems that you need to ensure that the default gateway is not 0.0.0.0. I've done this. I've also tried to remove IPv6 but this does not seem possible on Windows 7.

    Read the article

  • rails semi-complex STI with ancestry data model planning the routes and controllers

    - by ere
    I'm trying to figure out the best way to manage my controller(s) and models for a particular use case. I'm building a review system where a User may build a review of several distinct types with a Polymorphic Reviewable. Country (has_many reviews & cities) Subdivision/State (optional, sometimes it doesnt exist, also reviewable, has_many cities) City (has places & review) Burrow (optional, also reviewable ex: Brooklyn) Neighborhood (optional & reviewable, ex: williamsburg) Place (belongs to city) I'm also wondering about adding more complexity. I also want to include subdivisions occasionally... ie for the US, I might add Texas or for Germany, Baveria and have it be reviewable as well but not every country has regions and even those that do might never be reviewed. So it's not at all strict. I would like it to as simple and flexible as possible. It'd kinda be nice if the user could just land on one form and select either a city or a country, and then drill down using data from say Foursquare to find a particular place in a city and make a review. I'm really not sure which route I should take? For example, what happens if I have a Country, and a City... and then I decide to add a Burrow? Could I give places tags (ie Williamsburg, Brooklyn) belong_to NY City and the tags belong to NY? Tags are more flexible and optionally explain what areas they might be in, the tags belong to a city, but also have places and be reviewable? So I'm looking for suggestions for anyone who's done something related. Using Rails 3.2, and mongoid.

    Read the article

  • Java EE Website Planning Questions

    - by Tom Tresansky
    I'm a .NET programming who is soon moving to the Java EE world. I have plenty of experience with .NET web technologies, web services, WebForms and MVC. I am also very familiar with the Java language, and have written a few servlets and modified a couple of JSP pages, but I haven't touched EE yet. I'd like to set up a public website using Java EE so I can familiarize myself with whats current. I'm thinking just a technology playground at this point with no particular purpose in mind. What Java technologies are the current hotness for this sort of thing? (For example, if someone asked me what I'd recommend learning to set up a new .NET site, I'd say use ASP MVC instead of WebForms and recommend LINQ-to-SQL as a quick, simple and widely used ORM.) So, what I'd like to know is: Is there a recommended technology for the presentation layer? Is JSP considered a good approach, or is there anything cleaner/newer/more widespread? Is Hibernate still widely used for persistence? Is it obsolete? Is there anything better out there? (I've worked with NHibernate some, so I wouldn't be starting from scratch.) Is cheap Java EE web hosting available? What should I know being a .NET web developer moving to the Java world?

    Read the article

  • Virtual Machine Network Services causes networking problems in Vista Enterprise 64 bit install

    - by Bill
    I have a Quad-core/8GB Vista Enterprise 64-bit (SP2) installation on which I installed Virtual PC 2007. I have a problem that is opposite of all that I found searching around the Internet--everybody has problems making network connections from their guest VM. When Virtual Machine Network Services is enabled in the protocol stack for my network card across a reboot, it causes access problems to the network. The amount of time to login in using a domain credentialed account is upwards of 3 minutes, then after reaching the desktop the network and sharing center shows that my connection to the domain is unauthenticated. Disabling and re-enabling the Virtual Machine Network Services (uncheck in network properties/apply/recheck/apply) fixes the problem. And as long as I have the VMNS disabled when I shutdown the restart runs smoothly. I just have to remember to enable after login and disable before shutdown. I have un-installed and re-installed Virtual PC 2007 multiple times with restarts between. The install consists of the SP1 + a KB patch for guest resolution fix. Any help would be greatly appreciated. Some additional information... At one point during my hairpulling and teethgnashing with this, I tried to ping my primary DC and observed some weird responses: (Our DC is 10.10.10.25, my dynamic IP was 10.10.10.203) Reply from 10.10.10.203, Destination host unreachable. Request timed out. Reply from 10.10.10.25: ... This is not consistently repeatable, but thought it might strike a chord with someone.

    Read the article

  • Slackware - Assigning routes (IP address ranges) to one of many network adapters

    - by Dogbert
    I am using a Slackware 13.37 virtual machine within VirtualBox (current). I currently have a number of Ubuntu VMs on a single server, along with this Slackware VM. All VMs have been set up to use "Internal Network" mode, so they are all on a private LAN, and can see each other (ie: share files amongst themselves), but they remain private from the outside world. On on the these VMs (the Slackware one), I need to be able to grant it access to both this private network, and the internet at large. The first suggestion I found for handling this is to add another virtual network adapter to the VM, then set it to NAT. This results in the Slackware VM having the following network adapter setup: -NIC#1: Internal Network -NIC#2: NAT I want to set up the first network adapter (NIC#1) to handle all traffic on the following subnets: 10.10.0.0/255.255.0.0 192.168.1.0/255.255.255.0 And I want the second virtual network adapter (NIC#2) to handle everything else (ie: internet access). May I please have some assistance in setting this up on my Slackware VM? Additionally, I have searched for similar questions on SuperUser and Stackoverflow, but they all seem to pertain to my situation (ie: they all refer to OSX, or Ubuntu via the use of some UI-based tool). I'm trying to do this on Slack specifically via the command-line. Thanks!

    Read the article

  • Outlook locking network connection/session?

    - by HaydnWVN
    Scenario: We have an 'automatic orders' machine sat in the corner running XP with Outlook 2003. Its job is to check for new emails on a specific account, when it encounters one it checks the e-mail body for specific wording to determine which customer it is from (using a macro), then it checks the attachment for specific order codes before parsing the attachment to create a .csv file (which is then e-mailed onto one of the sales team) before importing the .csv into our bespoke ERP/Sales Order system to create an order. Problem: Periodically the machine will have symptoms of a lost network connection (unable to connect to any network source). Sometimes after several days, sometimes over a week. Volume of emails/orders processed does not seem to be linked. Additional info: The machines .pst is stored on a mapped network location. The .csv created is stored on a mapped network location. This is a workgroup, not a domain. All network drives are Samba shares from an Ubuntu fileserver. Our bespoke system runs from a database (MySQL) Ubuntu server. Our troubleshooting so far: I have switched machines (previous was Win2000) with the same symptoms. Restarting the machine FIXES the problem. Closing Outlook and then end tasking an Outlook.exe background process FIXES the problem. If you close Outlook, without end taking the background process, outlook will not reopen (saying it cannot find the pst file & it will not open any network location). Does Outlook have some kind of 'max session' linking it to network activity that is not closing after a mail request? Could Auto-archive be causing this? Is there a tool to check/display what each outlook.exe process is doing? Have not found many ways to troubleshoot this yet, as it is so infrequent...

    Read the article

  • Planning a competition

    - by Jérôme
    I need to produce the schedule of a sport-event. There are 30 teams. Each team has to play 8 matches. This means that it is not possible for each team to compete again all other teams, but I need to avoid that two team compete more than once against each other. My idea was to generate all possible matches (for 30 teams: (30*29)/2 = 435 matches) and select from this list 120 matches (8 match for each team: 8 * 30 / 2 = 120 matches). This is where I'm having a hard time: how can I select these 120 matches? I tried some simple solutions (take first match of the list, then the last, and so on) but they don't seem to work with 30 teams. I also tried to generate all possible match combination and find which one is working but with 30 team, this is too much calculation time. Is there an existing algorithm that I could implement?

    Read the article

  • Planning a skillset for a fallback career [closed]

    - by Davy Kavanagh
    I'm not too certain this is a SO question, but I didn't think it belonged in meta either. Long story short, I am bioinformatics researcher. I like to code, it's my favourite part of the job. I have been thinking for a while that if academia is not kind to me, I might seek a career in software development. My current contract is for three years and I would like to spend some time over the next 3 three years learning and practicing software development as possible. Python seems like a popular language and it what I mostly use to do things for me, but I am also in heavy use of R. So my main question is: Are python and R good things to be learning with a sotfware dev goal in mind, and if so, is there any particular type of programming or software that might be useful to have experience with. Hard questions to answer I know, but I thought I would get the answer from people who are in the know. Cheers, Davy.

    Read the article

  • Cisco AnyConnect VPN client - prevent connecting as work network

    - by Opmet
    From Windows 7 I'm using "Cisco AnyConnect Secure Mobility Client 3.0" to connect to our corporate network. Every time I establish the VPN connection Windows will set the type as "work network". I don't want this. So I go to "network and sharing center" and manually / interactively change it to "public network". But I have to repeat it for every new VPN connection. Is there any way to make Windows remember / persist this configuration? Can it be configured in the VPN client? Do our IT admins need to change something at server end? Motivation: A "work network" per default uses different firewall settings that allows for stuff like "network discovery" and "file shares". But I just need "remote desktop" (mstsc). Additional info: Our IT admins claimed this would be Windows default behaviour and there was nothing we could do about it: Windows would always initiate a VPN connection as "work network". Based on this statement I assume this is a "general" issue and went ahead posting here (at superuser.com).

    Read the article

  • Strange network issue (ZIP file fails CRC test over VPN)

    - by Joe Schmoe
    We have a server in the office running Windows Server 2003 Our office is connected to our datacenter via hardware VPN (Linksys RV082 router in the office to CISCO router in the datacenter). There is a job that runs on the server in the office that does following: ZIP certain files from the server using 7Zip, copy ZIP file to a network share in the office and verify ZIP integrity, copy ZIP file to a network share in the data center and verify ZIP integrity. Problem is - verifying ZIP integrity for the file in the data center always fails. However, if I run 7Zip on the server in data center that exposes that share ZIP file verifies just fine, so it is not actually corrupted during copy operation. Additionally, I tried running ZIP on other computers in the office to verify ZIP file on datacenter file share and it verifies OK. I tried plugging server to the same network port where my workstation is connected using different cable (my workstation doesn't exhibit this problem) and ZIP verification still fails. So the problem is local to that specific server. On network adapter properties for the server in question there is no "Advanced" tab where one can usually configure a lot of network settings. Network card driver is up to date (Windows Update doesn't find anything newer and Lenovo website doesn't have any drivers for Windows 2003 for this computer model). Is there any other way to configure network setting via command line? What settings could be relevant to this problem?

    Read the article

  • Samba share not accessible from Win 7 - tried advice on superuser

    - by Roy Grubb
    I have an old Red Hat Linux box that I use, amongst other things, to run Samba. My Vista and remaining Win XP PC can access the p/w-protected Samba shares. I just set up a new Windows 7 64-bit Pro PC. Attempts to access the Samba shares by clicking on the Linux box's icon in 'Network' from this machine gave a Logon failure: unknown user name or bad password. message when I gave the correct credentials. So I followed the suggestions in Windows 7, connecting to Samba shares (also checked here but found LmCompatibilityLevel was already 1). This got me a little further. If click on the Linux box's icon in 'Network' from this machine I now see icons for the shared directories. But when I click on one of these, I get \\LX\share is not accessible. You might not have permission... etc. I tried making the Win 7 password the same as my Samba p/w (the user name was already the same). Same result. The Linux box does part of what I need for ecommerce - the in-house part, it's not accessible to the Internet. As my Linux Fu is weak, I have to avoid changes to the Linux box, so I'm hoping someone can tell me what to do to Win 7 to make it behave like XP and Vista when accessing this share. Help please!? Thanks Thanks for replying @Randolph. I had set 'Network security: LAN Manager authentication level' to Send LM & NTLM - use NTLMv2 session security if negotiated based on the advice in Windows 7, connecting to Samba shares and had restarted the machine, but that didn't work for me. I'll try playing with other Network security values. I have now tried the following: Network security: Allow Local System to use computer identity for NTLM: changed from Not Defined to "Enabled". Restarted machine Still says "\LX\share is not accessible. You might not have permission..." etc. Network security: Restrict NTLM: Add remote server exceptions for NTLM Authentication (added LX) Restarted machine Still says "\LX\share is not accessible. You might not have permission..." etc. I can't see any other Network security settings that might affect this. Any other ideas please? Thanks Roy

    Read the article

  • Cannot Import VPN connection

    - by ECII
    Since 12.04 I cannot connect to my VPN. my ovpn file is the following http://email.uoa.gr/help/download/vpn/edunet.ovpn When I try to import the VPN file i get the following error The file 'edunet.ovpn' could not be read or does not contain recognized VPN connection information Error: unknown PPTP file extension. Is there any way arround this error? I have already installed network-manager-openvpn

    Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >