Search Results

Search found 13047 results on 522 pages for 'np hard'.

Page 49/522 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

  • Debian Harddrive Fdisk - Same ID's and changing letters

    - by James Willson
    I am trying to create and install a debain NAS and ive been having a hard time because I am new to all of this. I used ntfs-3g in order to automount my 4 NTFS drives. I also have a partitioned harddrive which is for the OS. When I was working on it and I ran this command I got this: fdisk -l /dev/sdae1 fdisk -l | grep NTFS /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 The weird thing is, all of the NTFS harddrives listed had an ID of 7. The next time I boot up my machine, I get an error about mounting /dev/sda1 and I run this command, and get the following results: fdisk -l | grep NTFS /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 I havent plugged in any drives, so whats going on? How to I make sure that my drives are mounted with the same sdXX name every time, and is the reason for this because they dont have unique ID numbers, if so, how do I solve this?

    Read the article

  • EEE PC 701/4G Surf Internal Drive: Is it really SSD?

    - by Bart Silverstrim
    I have an old EEE PC with the 4 Gig internal drive. Everything I've read keeps saying it's an SSD drive; running lshw tells me that it's an ATA disk, Silicon Motion SM. The thing seems to be rather slow, though. I know it has a 900 Mhz Celeron processor and only 512 meg of RAM, but it seems like drive access is slow even for those specs. Does anyone know if it really has an SSD drive? I thought that compared to regular hard disks SSD's were blazing fast, and this feels like and acts like it's pulling from something more akin to an internal USB memory stick.

    Read the article

  • Will I be abled to access 2nd HDD from dual-boot

    - by Ruben
    I'm planning to have a dual-boot on my computer. I have 2 physical hard drives, one 500GB and one 2TB. What I want to do, is have a dual-boot setup (2 partitions, both 50 GB) for Windows 8 and Windows 7. But will I be able to access the 3rd partition on the disk, or the other disk from both OSs? In this case, it would be really useful to access files and install programs, because I could use them on both OSs, as long as I have the same registry keys.

    Read the article

  • How reliable is HDD SMART data?

    - by andahlst
    Based on SMART data, you can judge the health of a disk, at least that is the idea. If I, for instance, run sudo smartctl -H /dev/sda on my ArchLinux laptop, it says that the hard drive passed the self tests and that it should be "healthy" based on this. My question is how reliable this information is, or more specifically: If according to the SMART data this disk is healthy, what are the odds of the disk suddenly failing despite this? This assumes the failure is not due to some catastrophic event that impossibly could have been predicted, such as the laptop falling down on the floor causing the drive heads to hit the disk. If the SMART data does not say the disk is in good shape, what are the odds of the disk failing within some amount of time? Is it possible that there will be false positives and how common are these? Of course, I keep backups no matter what. I am mostly curious.

    Read the article

  • OS Missing? Messed up the MBR on Win7 64-bit

    - by hom3lesshom3boy
    I have a Windows 7 machine with two hard drives: a 1TB C: drive and 500GB J:. I had Windows XP installed on C: and Windows 7 installed on J:. I installed Windows 7 after Windows XP from an installer .exe I (legally) bought and downloaded. It, and all of my other files, are sitting on my J: drive intact. While under my Windows 7 install, a few days ago I decided to use Priform's CCleaner and use its DriveWipe utility to wipe the C: drive. 1% into the process, I cancelled and attempted to use it again. It gives me an error saying it can't format the drive, so I poke around the Internet a bit, give up, and restart my computer. I first get an "OS is missing" error after the computer boots past the BIOS. I downloaded and put UBCD on a bootable USB to use another drivewiping tool to completely erase the C: drive, hoping it'll take the problem with it. No luck. I try to use TestDisk to make my J: my primary active drive, but no luck. I still get the "OS is missing" error. Or sometimes it'll hang at Verifying DMI Pool. Or sometimes I'll get the "NTLDR is missing" error. I get hold of Hiren's and put it on another bootable USB. I first I tried the Boot Windows 7 from Hard Drive option, and I get "Error 15: File Not Found". I tried the "Fix 'NTLDR is Missing'" option (I'm not quite sure why this is even showing up, since I'm trying to get into a HDD with Windows 7 installed. Probably messed up somewhere when I used TestDisk) and I get this list: I'll run through the error messages I get: 1st Try - Windows could not start because the following file is missing or corrupt: \system32\hal.dll 2nd Try - Windows could not start because the following file is missing or corrupt: \system32\ntoskrnl.exe 3rd Try - Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware. 4th - 8th Try - Same as #3 9th Try - I/O Error accessing boot sector file multi(0)disk(0)fdisk(0)\BOOTSEC.DOS. And computer freezes. 10th Try - computer restarts Needless to say, not a single one of those works. I then tried to open up the Windows 7 exe I have sitting on my J: from the Mini-XP OS on Hiren's, but it won't run because I'm trying to run a 64-bit file from a 32-bit exe. At least, that's the problem according to these guys: http://social.technet.microsoft.com/...-b2f54e9c7d18/ I then borrowed a 64-bit Windows Home Premium CD from a friend to get to the recovery options. But I get the error message: This version of System Recovery Options is not compatible with the version of Windows you are trying to repair. Try using a recovery disc that is compatible with this version of Windows. I pressed Shift + F10 to get to the Command Prompt directly. These are the exact steps I took from there (paraphrased a little): X:\Sources>bootrec /Fixmbr The operation completed successfully. X:\Sources>bootrec /Fixboot The operation completed successfully. I restarted my computer, but it still didn't work. I unplugged the C: drive, then tried bootrec and Diskpart: X:\Sources> bootrec.exe X:\Sources> bootrec /RebuildBcd Total identified Windows installations: 1 [1] \\?\GLOBALROOT\Device\HarddiskVolume1\Windows Add installation to bootlist? Yes(Y)/No(N)/All(A):y The requested system device cannot be found. X:\Sources>DiskPart DISKPART> List Disk Disk # Status Size Free Dyn Gpt Disk 0_Online_465GB_0B_______* Disk 1 Online 1000MB 0B (this is Hiren's on a bootable usb) DISKPART> Select Disk 0 Disk 0 is now the selected disk. DISKPART> List Partition Partition # Type Size Offset Partition 1 System 465GB 31KB DISKPART> Select Partition 1 Partition 1 is now the selected partition DISKPART> Active The selected disk is not a fixed MBR disk. The ACTIVE command can only be used on fixed MBR disks. DISKPART> exit Leaving Diskpart... X:\Sources>bootrec /Fixmbr The operation completed successfully. X:\Sources>bootrec /Fixboot The operation completed successfully. Before I go any further, is there anything I'm overlooking/doing wrong? All I care about is making the J: and Windows 7 bootable again. SPECS: Windows 7 Professional 64-Bit GIGABYTE - Motherboard - Socket 775 - GA-P35-DS3R (rev. 2.1) Crucial Ballistix 2048MB PC6400 DDR2 800MHz (2x2GB) Intel Core 2 Duo E6700 Processor (2.6 (6GHZ) I think... not sure anymore C: HDD - SAMSUNG HD103UJ (1TB, not plugged in) J: HDD - WDC WD5000AKS-00V1A0 (500GB)

    Read the article

  • Colored blocks on boot

    - by stackzerad
    When my laptop tries to boot right after POST I see colored blocks with flashing symbols in them. I am able to boot from windows PE cd. Tried fixboot and fixmbr with no success. I have also tried replacing boot files (ntldr, io.sys etc..) and removing video card drivers from windows\system32\drivers. The drive is seagate 2.5 ATA 160GB and has one NTFS partition on it. I have already fixed this issue by reformating the drive and reinstalling everything but after couple of weeks I get the same issue again. The diagnostics software shows no bad sectors on it and virus scan didn't find anything. Does anybody have an idea what this might be? UPDATE: tried defragmenting the hard drive just in case, but still no luck

    Read the article

  • Can't select hard disk off Windows 7 system image creator

    - by David
    When I try to create a system image in Windows 7 from the Control Panel (Control Panel\All Control Panel Items\Backup and Restore) I get the option to select a hard disk or a removeable disk to select, I have 2 disks and wanted to create the image on my spare one. However when I click refresh it doesn't show either of my disks but shows my CDROM under the removable disks area, anyone have this problem? Also, when I select a USB disk instead, it tries to iamge both my disks! I can't select my active Windows 7 installed disk! How pointless!

    Read the article

  • Windows 8.1 installation: Which drive is the F drive?

    - by sammyg
    I am doing a clean install of Windows 8.1 on an old PC. It was purchased as download from Microsoft Store and written to and booted from a USB flash drive. It went through all of these steps: Copying Windows Files Getting files ready for installation Installing features Installing updates Then at "Getting finished" I am stuck at this stupid dialog box. Please unplug the following external drive and click OK to restart your computer and finish installing Windows. F: How do I tell what physical drive this is? Can I drop to command prompt during installation? And is it safe to unplug it while powered on? There is no external hard drive connected, none that I can see. There is no USB or FireWire drive connected externally. I think it sees one of the internal drives as external... in some weird way?!

    Read the article

  • Same SCSI drive appears multiple times on the controller list

    - by ohad
    Hi, I have an Adaptec AHA-2940UW SCSI adapter, to which I connected a single Atlas 10K III drive (and nothing more). When my computer loads up, the pre-OS Adaptec screen shows (I believe this is called the POST screen), where I can see the Atlas drive listed many times (i.e. with ID0, ID1, ... ID5, ID7, ID8,...,ID15 [ID6 is the adapter itself]) Using the same HD on an Adaptec AHA-2940UB the disk only shows once Since my OS hasn't been installed yet, I'm not sure if this is a problem (I would guess it is), and if so - how to solve it. Termination and multiple LUNs come mind, but the cable provides termination and I don't see why a hard drive would request multiple LUNs, especially considering it is not jumpered at all, and multuple LUN support is disabled in the Adaptec controller BIOS (via the SCSISelect utility) Thank you

    Read the article

  • Can I lose files when changing security on an XP drive within Windows 7?

    - by Will
    Hard to come up with a title for this one, sheesh. Have a friend whose computer went down. He asked me to get all his data off his drive. His old computer was running XP. So, I've plugged it into my Windows 7 computer. When I attempt to open up his Documents and Settings folder, I get prompted to elevate in order to "permanently get access to this folder." If I do this, will I be able to access the files in this directory, or will all the current files be lost? I may be overly paranoid about this, but I can't find any information about exactly what will happen when I do this. TIA.

    Read the article

  • Sporadic disk clicking sound

    - by Abdó
    Hi, I'm having some unusual and sporadic hard disk clicking issues. Here is a cronological description of the facts. I'm using an ASUS P6T-SE with Intel Core i7, 6Gb RAM 600W Power supply and ATI4670 graphics, running Ubuntu 10.10. About one month ago my hard disk (SATA II Seagate Barracuda 1Tb 7200 rpm) started making a clicking sound: a sort of loud tic-tac, every second or so, when involved in disk activity. The system was clearly slower than before at disk access, but it was functional and I could not find any signal of trouble on the linux logs. I disconnected the disk and tried an older SATA drive I had around: no problem with it. Then I reconnected the Seagate disk, and the problem was mysteriously gone. Ubuntu booted normally, usual speed, no clicking. A couple of weeks later, the problem reappeared. I tried disconnecting reconnecting (as it somehow solved the problem before) without luck. So, despite it was a rather new drive, I assumed it was a hardware issue, made backups and bought a new drive. The new drive is a SATA II Seagate Barracuda 1.5 Tb 7200 rpm. I installed both drives at the same time, with the intention of transferring my files from on to the other. To my surprise, when I booted the computer with both drives, both started making the clicking sound !! Even worse, I removed the old drive, leaving the unformated new drive connected, and booted from a LiveCD. It kept clicking ! Puzzled by this, I tried both drives on my laptop with a SATA to USB cable. At the moment I connected any of them, they made one or two unusual clicks and immediately stopped doing that and worked normally. The old drive I thought almost dead, was working like a charm as if nothing happened. Then I thought: "ok, it must be the motherboard. Let's try again". So, I reconnected the old drive to the ASUS P6T motherboard (the same cables and SATA port as before), and it worked as if nothing happened ! The problem was gone again. The new 1.5 Tb drive was also working ok: No clicking nor slowdown. So I left the old 1Tb disk connected and kept using the computer daily during 3 weeks, until today it happened again. Now I don't really know what to do or check. I'm not even sure if it is a hardware issue any more ! This is rather annoying as it seems it happens with a period of 2 or 3 weeks and I have no means of forcing it to happen. Does anyone have a clue of what can causes this behaviour or have any suggestions of things I should check when it happens again ? What I did today is checking some SMART parameters Error log: smartctl -l error /dev/sda. No errors Short selftest: smartctl -t short /dev/sda. No errors Disk Health check: smartctl -H /dev/sda. passed And here are the vendor specific parameters (smartctl -A /dev/sda) Which I'm not quite sure how to interpret. === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 120 099 006 Pre-fail Always - 235962588 3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 187 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 16348045 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3590 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 94 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 097 000 Old_age Always - 4295164029 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 070 057 045 Old_age Always - 30 (Lifetime Min/Max 19/31) 194 Temperature_Celsius 0x0022 030 043 000 Old_age Always - 30 (0 18 0 0) 195 Hardware_ECC_Recovered 0x001a 037 026 000 Old_age Always - 235962588 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 73950746906346 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1832967731 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 3294986902 Any clue to this mystery will be really welcome. Thank you very much !!

    Read the article

  • Method for imaging a HDD? [closed]

    - by Sonny Ordell
    Possible Duplicate: Imaging new hard drive in Windows 7 laptop? I have to image my 320gb Laptop HDD before I send it in for repairs. The HDD is likely going to get replaced, and I would ideally like to be able to restore everything as I have it now without having to reinstall my OSes, programs and place all my files back again. I can make space on an external HDD I have, so am just looking for how I should go about this. Should I just use dd with a linux rescue cd? Or is there perhaps a more suitable program with its own rescue disk?

    Read the article

  • Operating System Not Found - BIOS recognizes, Live OS doesn't (Laptop)

    - by Klaus Borges
    Here's the deal: I have a multi-partitioned hard drive on my laptop set up with GRUB. I got a blue-screen while working on Windows 7 and when rebooting I got the Operating System Not Found error message. I rebooted the computer once again and entered the BIOS setup just to see if recognized my HDD - it did. Next step for me was booting a Live CD and seeing if I could repair GRUB or at least check if something changed on the partitions, but it doesn't seem to recognize anything there. Tried blkid, fdisk -l, not even GParted can see it. What should I do?

    Read the article

  • Reimage several of the same model PC by copying the hard disk

    - by Tim Lehner
    I have several of the same machine (Dell Precision T3500) that originally came with Windows 7 Pro (there is a Windows 7 Pro OA product key sticker on top of each one). These were initially downgraded to XP by a former IT colleague, but are now back in the pool of unused machines. I am looking to format and install Windows 7 Pro on one of them using the latest official Win7 installer ISO with SP1 and then clone the hard drive to the other machines. The questions then, are: Does this even make sense, or is there a better way to do this considering I'm only doing it to 6 machines? Does this jive with MS licensing (we are the original purchaser of the machines, and thus, presumably, the license holder...but I'm no expert)? Is it possible to apply the individual 25-char product keys to the cloned machines after cloning? How far can I go in the config process (installing corporate standard apps and such) before I have to clone to the other machines considering the licensing/key questions?

    Read the article

  • Easiest way to move my Windows installation to an SSD?

    - by Jon Artus
    I've taken the plunge and bought an SSD and want to move my existing Windows installation over. The current hard disk is 500Gb, but I've trimmed the contents down to about ~40Gb. I'm transferring it across to a 100Gb SSD and looking for the easiest way just to copy everything across and set the SSD up as a boot device. I've looked at a few tools like Macrium Reflect, but they don't seem able to restore to a smaller drive. Do I need to go for something like PING to do this? I'm trying to avoid scary Linux-based boot utilities if possible, does anyone know of an easier way?

    Read the article

  • Motherboard rejects identical hard drive, one works the other doesn't

    - by Payson Welch
    I have an interesting situation. I have a Dell XS23-SB server that has four blades in it. The blades use Supermicro X7DWT motherboards, and interface with the sata drives through a backplane. I took two identical drives from a raid 0 enclosure that came from the factory (GDrive), one works on all four servers, the other does not. I verified that they both work by plugging them into a hard drive cradle. This behavior can be repeated with other drives, some drives work and some don't. However when i test them, they ALL work on my PC. What could cause this?

    Read the article

  • Take Complete Image of CRM Server Application

    - by nicorellius
    I have heard of snapshots or ghost images like this. But I have never used this kind of tool to actually clone a piece of hard drive. I think Norton Partition Magic can do something like this as well, but haven't tried it. So my question is this: How can I duplicate a CRM server application exactly so that I can transfer it to another system? I have a CRM server running LAMP (Linux, Apache, MySQL, and PHP) and I urgently need to transfer these data to another system without actually installing, configuring the dependencies and then doing the same for the software itself. Has anyone done this or does anyone know how to do this?

    Read the article

  • Online Windows Server Virtual Hard Drive Images for Use with VMWare Server 1.0

    - by charfeddine.ahmed
    Hello there, I have a remote Server running the VMWare hypervisor. I want to create a virtual machine running Windows Server. However I can't upload mine since my internet connection is slow (would take me days to do the upload). Microsoft has public hard drive images with Windows Server Trial on them, but they work for Virtual PC. I am looking for such files that can be used with VMWare Server. That case I can download these files directly to the server which enjoys a fast connection. Thanks in advance.

    Read the article

  • Brand new Seagate HDD has high raw read error rate

    - by kpax
    I've just purchased a brand new Seagate ST31000524AS 1TB HDD. Manufacture date shows as January 2012 (yes that's as new as new can get), so must be one of the new batches from the post-flood Thailand. Anyway, I downloaded a copy of Active Hard Disk Monitor tool to check the S.M.A.R.T. parameters and I find the parameter Raw Read Error Rate is very low. Should I be worried? Will this rectify over time? This hdd is just 7 hours old; what gives? Edit: I meant high raw read error rate - Title updated accordingly

    Read the article

  • Backup virtual hard disk

    - by Harshil Sharma
    I have a VM created in VMWare Player. It's VHD is currently sized 17 GB, split among multiple 2 GB files. The host OS is Windows 8. I use CrashPlan in host OS for file backup. The problem is, whenever I use the VM, CrashPlan detects all parth of VHD as altered and backs up the 17 GB VHD. WHat I want is a software that can run on host OS (Windows 8), treat the VHD as a physical hard disk and create incremental backups of the VHD, includeing all files, programs and the OS

    Read the article

  • My WD passport detected but not shown on my computer

    - by Rakesh Patel
    1TB WD harddisk is detected in laptop but drives not visible on my computer. Under disk managment drives shown without letters. Right clicking on these drives give 2 options: Delete volume Help. The same harddisk was running well on the same laptop a day before. It is also showing full size of hard drives, Healthy (Primary Partition) etc. (this happened after harddisk usage by guest). Harddisk is new only (about 5 month usage) Please suggest: Is there hardware related problem inside harddisk, if so is it repairable? Is there any option to recover data?

    Read the article

  • Certain drives in RAID 5 set intermittently are not recognized

    - by hydroparadise
    I have a curious problem in that 1 (sometimes 2) drives do not get recognized in a RAID 5 set. The server is getting rather old at 5 to 6 years, but still seems to function well once the machine sees all drives. So that leaves me with three areas to consider: the motherboard, the SATA RAID card, or the individual hard drives themselves. I am leaning toward the RAID card, but have not had much dealings with RAID cards. What would cause individual drives not to be recognized in the set? If it was the card, I would think that it would be all or nothing. If it were a single drive, is it possible that it would only work sometimes? The only other thing to consider is that that they are different drives (Seagate and Western Digital) but all around 80 GB. SATA RAID controller is 3ware Escalade 8506-4LP Motherboard is a SuperMicro P4SPA+ Am open and available for more details if needed...

    Read the article

  • Looking for an actual experience of RAID 5 2 drive failure?

    - by Brian
    I'm wondering if anyone has any personal experience of RAID 5 2 drive failure with large drives? As I understand it, the theory is that with large 1-2TB drives, if one drive fails in the raid set, it needs to rebuild everything so is thus hitting all the other drives very hard, and the chance of another failure goes up, especially if the drives were from the same manufacturing batch. And if you lose another drive, you lose all the data. This is usually explained after the statement "RAID is not backup" which I agree with. The theory of this makes sense, and I understand it, but does it really happen?

    Read the article

  • Create new partition on ssd hard (remove hibernate)

    - by Aleks
    I bought Dell Vostro 3360 notebook with Windows 7 It has 128 GB SSD hard disk, it is already has 4 partitions: Dell partition, Recovery partition, OS partition, Hibernate partition. Here is screenshot (Russian language, but I made some marks): I want to split OS partition, because I need c:\ and d:\ . Reason is that I have a lot of difficulties with administration mode on c:. So I tried to split OS partition but I already have 4 partitions. Can I remove hibernate partition without consequences? I have Hibernate disabled in settings, but I have hiberfil.sys file on c:\ If I can remove it, how can I do this, I can't do this with standard GUI disk managment tool

    Read the article

  • Windows 7 keeps losing drive letters

    - by Dean Perry
    Windows 7 loses its drive letters and I have to keep manually assigning a drive letter everytime I plug in a hard drive, whether it's internal or external. The only way to get around it is to reinstall Windows 7 but the problem will come back after a few months. We are a PC repair company and plug in many drives during the say and it can be very frustrating having to keep assigning a drive letter every time a drive is plugged in. Windows Updates are turned off so it can't be that. Any reason why this would have happened?

    Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >