Search Results

Search found 1308 results on 53 pages for 'reviews'.

Page 49/53 | < Previous Page | 45 46 47 48 49 50 51 52 53  | Next Page >

• Video on Architecture and Code Quality using Visual Studio 2012&ndash;interview with Marcel de Vries and Terje Sandstrom by Adam Cogan

  - by terje

  Find the video HERE. Adam Cogan did a great Web TV interview with Marcel de Vries and myself on the topics of architecture and code quality.  It was real fun participating in this session.  Although we know each other from the MVP ALM community,  Marcel, Adam and I haven’t worked together before. It was very interesting to see how we agreed on so many terms, and how alike we where thinking.  The basics of ensuring you have a good architecture and how you could document it is one thing.  Also, the same agreement on the importance of having a high quality code base, and how we used the Visual Studio 2012 tools, and some others (NDepend for example)  to measure and ensure that the code quality was where it should be.  As the tools, methods and thinking popped up during the interview it was a lot of “Hey !  I do that too!”.  The tools are not only for “after the fact” work, but we use them during the coding.  That way the tools becomes an integrated part of our coding work, and helps us to find issues we may have overlooked.  The video has a bunch of call outs, pinpointing important things to remember. These are also listed on the corresponding web page. I haven’t seen that touch before, but really liked this way of doing it – it makes it much easier to spot the highlights.  Titus Maclaren and Raj Dhatt from SSW have done a terrific job producing this video.  And thanks to Lei Xu for doing the camera and recording job.  Thanks guys ! Also, if you are at TechEd Amsterdam 2012, go and listen to Adam Cogan in his session on “A modern architecture review: Using the new code review tools” Friday 29th, 10.15-11.30 and Marcel de Vries session on “Intellitrace, what is it and how can I use it to my benefit” Wednesday 27th, 5-6.15 The highlights points out some important practices.  I’ll elaborate on a few of them here: Add instructions on how to compile the solution.  You do this by adding a text file with instructions to the solution, and keep it under source control.  These instructions should contain what is needed on top of a standard install of Visual Studio.  I do a lot of code reviews, and more often that not, I am not even able to compile the program, because they have used some tool or library that needs to be installed.  The same applies to any new developer who enters into the team, so do this to increase your productivity when the team changes, or a team member switches computer. Don’t forget to document what you have to configure on the computer, the IIS being a common one. The more automatic you can do this, the better.  Use NuGet to get down libraries. When the text document gets more than say, half a page, with a bunch of different things to do, convert it into a powershell script instead.  The metrics warning levels.  These are very conservatively set by Microsoft.  You rarely see anything but green, and besides, you should have color scales for each of the metrics.  I have a blog post describing a more appropriate set of levels, based on both research work and industry “best practices”.  The essential limits are: Cyclomatic complexity and coupling:  Higher numbers are worse On method levels: Green :  From 0 to 10 Yellow:  From 10 to 20  (some say 15).   Acceptable, but have a look to see if there is something unneeded here. Red: From 20 to 40:   Action required, get these down. Bleeding Red: Above 40   This is the real red alert.  Immediate action!  (My invention, as people have asked what do I do when I have cyclomatic complexity of 150.  The only answer I could think of was: RUN! ) Maintainability index:  Lower numbers are worse, scale from 0 to 100. On method levels: Green:  60 to 100 Yellow:  40 – 60.    You will always have methods here too, accept the higher ones, take a look at those who are down to the lower limit.  Check up against the other metrics.) Red:  20 – 40:  Action required, fix these. Bleeding red:  Below 20.  Immediate action required. When doing metrics analysis, you should leave the generated code out.  You do this by adding attributes, unfortunately Microsoft has “forgotten” to add these to all their stuff, so you might have to add them to some of the code.  It most cases it can be done so that it is not overwritten by a new round of code generation.  Take a look a my blog post here for details on how to do that. Class level metrics might also be useful, at least for coupling and maintenance.  But it is much more difficult to set any fixed limits on those.  Any metric aggregations on higher level tend to be pretty useless, as the number of methods vary pretty much, and there are little science on what number of methods can be regarded as good or bad.  NDepend have a recommendation, but they say it may vary too.  And in these days of data binding, the number might be pretty high, as properties counts as methods.  However, if you take the worst case situations, classes with more than 20 methods are suspicious, and coupling and cyclomatic complexity go red above 20, so any classes with more than 20x20 = 400 for these measures should be checked over. In the video we mention the SOLID principles, coined by “Uncle Bob” (Richard Martin). One of them, the Dependency Inversion principle we discuss in the video.  It is important to note that this principle is NOT on whether you should use a Dependency Inversion Container or not, it is about how you design the interfaces and interactions between your classes.  The Dependency Inversion Container is just one technique which is based on this principle, but which main purpose is to isolate things you would like to change at runtime, for example if you implement a plug in architecture.  Overuse of a Dependency Inversion Container is however, NOT a good thing.  It should be used for a purpose and not as a general DI solution.  The general DI solution and thinking however is useful far beyond the DIC.   You should always “program to an abstraction”, and not to the concreteness.  We also talk a bit about the GRASP patterns, a term coined by Craig Larman in his book Applying UML and design patterns. GRASP patterns stand for General Responsibility Assignment Software Patterns and describe fundamental principles of object design and responsibility assignment.  What I find great with these patterns is that they is another way to focus on the responsibility of a class.  One of the things I most often found that is broken in software designs, is that the class lack responsibility, and as a result there are a lot of classes mucking around in the internals of the other classes.  We also discuss the term “Code Smells”.  This term was invented by Kent Beck and Martin Fowler when they worked with Fowler’s “Refactoring” book. A code smell is a set of “bad” coding practices, which are the drivers behind a corresponding set of refactorings.  Here is a good list of the smells, and their corresponding refactor patterns. See also this.

  Read the article

• User Guide to Dropbox Shared Folders

  - by Matthew Guay

  Dropbox is an incredibly useful tool for keeping all your files synced between your computers and the cloud.  Here we’re going to look at how you can keep all of your team on the same page with Dropbox shared folders. Creating a Shared Folder Setting up a shared folder in Dropbox is easy.  Add the files you want to share to a folder in Dropbox on your computer, then right-click in the folder, select Dropbox, and then choose Share This Folder.   Alternately, log into your Dropbox account online, click the drop-down menu beside the folder you want to share, and click Share this folder. Now, enter the email addresses of the people you want to share the folder with, and optionally enter a message explaining why you’re sharing the folder. The people you invite will receive an email inviting them to view and join the shared folder.  If they haven’t signed up for Dropbox, they can directly signup; otherwise, they can simply log into their Dropbox account and start adding or editing files. Shared folders have a slightly different icon in your Dropbox.  Notice the shared folder on the left has an icon with 2 people, while the folder on the right that is not shared, shows previews of its contents. See Your Shared Folder’s History Whenever your collaborators with your shared folders add or change files, you will see a tooltip notification telling you what changed. You can also view the changes online.  Log into your Dropbox account in your browser and select the Events tab.  This shows all changes to your Dropbox, but you can view only the changes in your shared folder by selecting its name on the left sidebar. Now you can see all recent changes to your folder, and can also see who added or removed each file.   On the bottom of the page, you can even add a comment that all the collaborators will see. If someone deleted a file you still need, you can restore it by clicking its link in this online history.  Or, you can view any deleted files by right-clicking in your Dropbox folder in Explorer.  Select Dropbox, and then click Show Deleted Files.   Get Notified When a Change is Made You’re not always in front of your computer; you’ve got a life beyond your projects, after all (at least hopefully).  If you really want to stay connected to what’s happening with your project, though, you can easily do that no matter where you are. Your shared Dropbox folder’s history page offers an RSS feed of all changes to the folder.  Click  the Subscribe to this feed hyperlink. Now, in the popup that opens, click “Copy to clipboard” so you can use this RSS feed. You can subscribe to RSS feeds through many web browsers, email clients, dedicated feed readers, and more.  In Firefox, Internet Explorer 7/8, or Opera, you can paste the feed address into your address bar and subscribe to the feed directly in your browser.   However, subscribing to the feed in a desktop application won’t help you much when you’re away from your computer.  One great option is to subscribe in the popular Google Reader.  Then you can check your feed from any browser, on any computer or mobile device. To add your Dropbox feed to Google Reader, log into Google Reader (link below), click Add a subscription on the top left, paste your RSS feed from Dropbox, and click Add.   Now you can see any changes to files or folders in Google Reader. You can even add your feed to your iGoogle homepage.  Click the Add it Now button on the right in the front page of Google Reader to add your feeds to iGoogle.   Now you can see updates on your files from your homepage.  If you’re using a different computer, just login to your Google account to see what’s happening. You can also access your Google Reader feeds from many programs and apps for most major Smartphones including iPhone, Windows Phone, and Blackberry. Receive a Tweet or Text When Changes are Made If you’re a hyper-connected individual, chances are you send and receive tweets on the go.  If so, this might be the best way for you to get notified when changes are made to your Dropbox shared folder.  To do this, first create a new Twitter account to publish your changes through.  If you don’t want the whole world to see your updates, click Settings and set your new Twitter account to Private. Once the new account is created, follow it with your normal Twitter account so you’ll see updates. Now, let’s publish our Dropbox RSS feed to Twitter.  Create an account with Twitterfeed (link below). Once your account is setup, add your feed to it.  Name your feed, and enter your Feed address from Dropbox.  Click Advanced Settings to make your feed work just like you want. In Advanced Settings, change the frequency to “Every 30 mins” to make sure you’re updated on changes as quick as possible.  You can also change other settings if you like. Click “Continue to Step 2”, and then click Twitter under the available services to add your account. Make sure your signed into your new Twitter account, and then click Authenticate Twitter. Allow the application. Now, finally, click Create Service. Whenever a change is made, you will receive a tweet via your new Twitter account.  And since you can receive tweets via text message or many mobile applications, you’ll never be very far away from your Dropbox changes!   Conclusion Dropbox shared folders are a great way to keep your whole team working together on the same files in a project.  And with these handy tricks, you can keep up with your shared files wherever you are! There are a lot of cool things you can do with Dropbox make sure to check out our posts on adding Dropbox to the Windows 7 Start menu, Accessing Dropbox files from Chrome, and Syncing your Pidgin Profile Across Multiple PCs. Links Signup or access your Dropbox account Google Reader Tweet your feed with Twitterfeed Similar Articles Productive Geek Tips How to Add and Manage Shared Folders on Windows Home ServerManage User Accounts in Windows Home ServerAdd "My Dropbox" to Your Windows 7 Start MenuComplete Guide to Networking Windows 7 with XP and VistaMoving Your Personal Data Folders in Windows Vista the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7

  Read the article

• Use Autoruns to Manually Clean an Infected PC

  - by Mark Virtue

  There are many anti-malware programs out there that will clean your system of nasties, but what happens if you’re not able to use such a program?  Autoruns, from SysInternals (recently acquired by Microsoft), is indispensable when removing malware manually. There are a few reasons why you may need to remove viruses and spyware manually: Perhaps you can’t abide running resource-hungry and invasive anti-malware programs on your PC You might need to clean your mom’s computer (or someone else who doesn’t understand that a big flashing sign on a website that says “Your computer is infected with a virus – click HERE to remove it” is not a message that can necessarily be trusted) The malware is so aggressive that it resists all attempts to automatically remove it, or won’t even allow you to install anti-malware software Part of your geek credo is the belief that anti-spyware utilities are for wimps Autoruns is an invaluable addition to any geek’s software toolkit.  It allows you to track and control all programs (and program components) that start automatically with Windows (or with Internet Explorer).  Virtually all malware is designed to start automatically, so there’s a very strong chance that it can be detected and removed with the help of Autoruns. We have covered how to use Autoruns in an earlier article, which you should read if you need to first familiarize yourself with the program. Autoruns is a standalone utility that does not need to be installed on your computer.  It can be simply downloaded, unzipped and run (link below).  This makes is ideally suited for adding to your portable utility collection on your flash drive. When you start Autoruns for the first time on a computer, you are presented with the license agreement: After agreeing to the terms, the main Autoruns window opens, showing you the complete list of all software that will run when your computer starts, when you log in, or when you open Internet Explorer: To temporarily disable a program from launching, uncheck the box next to it’s entry.  Note:  This does not terminate the program if it is running at the time – it merely prevents it from starting next time.  To permanently prevent a program from launching, delete the entry altogether (use the Delete key, or right-click and choose Delete from the context-menu)).  Note:  This does not remove the program from your computer – to remove it completely you need to uninstall the program (or otherwise delete it from your hard disk). Suspicious Software It can take a fair bit of experience (read “trial and error”) to become adept at identifying what is malware and what is not.  Most of the entries presented in Autoruns are legitimate programs, even if their names are unfamiliar to you.  Here are some tips to help you differentiate the malware from the legitimate software: If an entry is digitally signed by a software publisher (i.e. there’s an entry in the Publisher column) or has a “Description”, then there’s a good chance that it’s legitimate If you recognize the software’s name, then it’s usually okay.  Note that occasionally malware will “impersonate” legitimate software, but adopting a name that’s identical or similar to software you’re familiar with (e.g. “AcrobatLauncher” or “PhotoshopBrowser”).  Also, be aware that many malware programs adopt generic or innocuous-sounding names, such as “Diskfix” or “SearchHelper” (both mentioned below). Malware entries usually appear on the Logon tab of Autoruns (but not always!) If you open up the folder that contains the EXE or DLL file (more on this below), an examine the “last modified” date, the dates are often from the last few days (assuming that your infection is fairly recent) Malware is often located in the C:\Windows folder or the C:\Windows\System32 folder Malware often only has a generic icon (to the left of the name of the entry) If in doubt, right-click the entry and select Search Online… The list below shows two suspicious looking entries:  Diskfix and SearchHelper These entries, highlighted above, are fairly typical of malware infections: They have neither descriptions nor publishers They have generic names The files are located in C:\Windows\System32 They have generic icons The filenames are random strings of characters If you look in the C:\Windows\System32 folder and locate the files, you’ll see that they are some of the most recently modified files in the folder (see below) Double-clicking on the items will take you to their corresponding registry keys: Removing the Malware Once you’ve identified the entries you believe to be suspicious, you now need to decide what you want to do with them.  Your choices include: Temporarily disable the Autorun entry Permanently delete the Autorun entry Locate the running process (using Task Manager or similar) and terminating it Delete the EXE or DLL file from your disk (or at least move it to a folder where it won’t be automatically started) or all of the above, depending upon how certain you are that the program is malware. To see if your changes succeeded, you will need to reboot your machine, and check any or all of the following: Autoruns – to see if the entry has returned Task Manager (or similar) – to see if the program was started again after the reboot Check the behavior that led you to believe that your PC was infected in the first place.  If it’s no longer happening, chances are that your PC is now clean Conclusion This solution isn’t for everyone and is most likely geared to advanced users. Usually using a quality Antivirus application does the trick, but if not Autoruns is a valuable tool in your Anti-Malware kit. Keep in mind that some malware is harder to remove than others.  Sometimes you need several iterations of the steps above, with each iteration requiring you to look more carefully at each Autorun entry.  Sometimes the instant that you remove the Autorun entry, the malware that is running replaces the entry.  When this happens, we need to become more aggressive in our assassination of the malware, including terminating programs (even legitimate programs like Explorer.exe) that are infected with malware DLLs. Shortly we will be publishing an article on how to identify, locate and terminate processes that represent legitimate programs but are running infected DLLs, in order that those DLLs can be deleted from the system. Download Autoruns from SysInternals Similar Articles Productive Geek Tips Using Autoruns Tool to Track Startup Applications and Add-onsHow To Get Detailed Information About Your PCSUPERAntiSpyware Portable is the Must-Have Spyware Removal Tool You NeedQuick Tip: Windows Vista Temp Files DirectoryClear Recent Commands From the Run Dialog in Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more Download Microsoft Office Help tab

  Read the article

• Rockmelt, the technology adoption model, and Facebook's spare internet

  - by Roger Hart

  Regardless of how good it is, you'd have to have a heart of stone not to make snide remarks about Rockmelt. After all, on the surface it looks a lot like some people spent two years building a browser instead of just bashing out a Chrome extension over a wet weekend. It probably does some more stuff. I don't know for sure because artificial scarcity is cool, apparently, so the "invitation" is still in the post*. I may in fact never know for sure, because I'm not wild about Facebook sign-in as a prerequisite for anything. From the video, and some initial reviews, my early reaction was: I have a browser, I have a Twitter client; what on earth is this for? The answer, of course, is "not me". Rockmelt is, in a way, quite audacious. Oh, sure, on launch day it's Bay Area bar-chat for the kids with no lenses in their retro specs and trousers that give you deep-vein thrombosis, but it's not really about them. Likewise,  Facebook just launched Google Wave, or something. And all the tech snobbery and scorn packed into describing it that way is irrelevant next to what they're doing with their platform. Here's something I drew in MS Paint** because I don't want to get sued: (see: The technology adoption lifecycle) A while ago in the Guardian, John Lanchester dusted off the idiom that "technology is stuff that doesn't work yet". The rest of the article would be quite interesting if it wasn't largely about MySpace, and he's sort of got a point. If you bolt on the sentiment that risk-averse businessmen like things that work, you've got the essence of Crossing the Chasm. Products for the mainstream market don't look much like technology. Think for  a second about early (1980s ish) hi-fi systems, with all the knobs and fiddly bits, their ostentatious technophile aesthetic. Then consider their sleeker and less (or at least less conspicuously) functional successors in the 1990s. The theory goes that innovators and early adopters like technology, it's a hobby in itself. The rest of the humans seem to like magic boxes with very few buttons that make stuff happen and never trouble them about why. Personally, I consider Apple's maddening insistence that iTunes is an acceptable way to move files around to be more or less morally unacceptable. Most people couldn't care less. Hence Rockmelt, and hence Facebook's continued growth. Rockmelt looks pointless to me, because I aggregate my social gubbins with Digsby, or use TweetDeck. But my use case is different and so are my enthusiasms. If I want to share photos, I'll use Flickr - but Facebook has photo sharing. If I want a short broadcast message, I'll use Twitter - Facebook has status updates. If I want to sell something with relatively little hassle, there's eBay - or Facebook marketplace. YouTube - check, FB Video. Email - messaging. Calendaring apps, yeah there are loads, or FB Events. What if I want to host a simple web page? Sure, they've got pages. Also Notes for blogging, and more games than I can count. This stuff is right there, where millions and millions of users are already, and for what they need it just works. It's not about me, because I'm not in the big juicy area under the curve. It's what 1990s portal sites could never have dreamed of achieving. Facebook is AOL on speed, crack, and some designer drugs it had specially imported from the future. It's a n00b-friendly gateway to the internet that just happens to serve up all the things you want to do online, right where you are. Oh, and everybody else is there too. The price of having all this and the social graph too is that you have all of this, and the social graph too. But plenty of folks have more incisive things to say than me about the whole privacy shebang, and it's not really what I'm talking about. Facebook is maintaining a vast, and fairly fully-featured training-wheels internet. And it makes up a large proportion of the online experience for a lot of people***. It's the entire web (2.0?) experience for the early and late majority. And sure, no individual bit of it is quite as slick or as fully-realised as something like Flickr (which wows me a bit every time I use it. Those guys are good at the web), but it doesn't have to be. It has to be unobtrusively good enough for the regular humans. It has to not feel like technology. This is what Rockmelt sort of is. You're online, you want something nebulously social, and you don't want to faff about with, say, Twitter clients. Wow! There it is on a really distracting sidebar, right in your browser. No effort! Yeah - fish nor fowl, much? It might work, I guess. There may be a demographic who want their social web experience more simply than tech tinkering, and who aren't just getting it from Facebook (or, for that matter, mobile devices). But I'd be surprised. Rockmelt feels like an attempt to grab a slice of Facebook-style "Look! It's right here, where you already are!", but it's still asking the mature market to install a new browser. Presumably this is where that Facebook sign-in predicate comes in handy, though it'll take some potent awareness marketing to make it fly. Meanwhile, Facebook quietly has the entire rest of the internet as a product management resource, and can continue to give most of the people most of what they want. Something that has not gone un-noticed in its potential to look a little sinister. But heck, they might even make Google Wave popular.     *This was true last week when I drafted this post. I got an invite subsequently, hence the screenshot. **MS Paint is no fun any more. It's actually good in Windows 7. Farewell ironically-shonky diagrams. *** It's also behind a single sign-in, lending a veneer of confidence, and partially solving the problem of usernames being crummy unique identifiers. I'll be blogging about that at some point.

  Read the article

• top tweets WebLogic Partner Community – June 2013

  - by JuergenKress

  Send us your tweets @wlscommunity #WebLogicCommunity and follow us on twitter http://twitter.com/wlscommunity. Please feel free to send us your news! Lucas Jellema ?Getting started with Java EE 7: The Tutorial http://docs.oracle.com/javaee/7/tutorial/doc/home.htm … Simon Haslam I'm looking forward to starting a "WLS on ODA" proof of concept - some ideas for testing: http://www.veriton.co.uk/roller/fmw/entry/virtualised_oda_proof_of_concept … Frank Munz ?It's not too late - I just submitted two presentations about #OracleWebLogic and #Coherence for the @DOAGeV conference in Nürnberg. Did you? Arun Gupta ?Tyrus 1.0 User Guide: https://tyrus.java.net/documentation/1.0/user-guide.html … #WebSocket #JavaEE7 #GlassFish Arun Gupta #JavaEE7 Launch Webinar Technical Breakout replays on Youtube: http://bit.ly/12uUicT JSON 1.0 , EJB .2, Batch 1.0 more coming! OracleBlogs ?FREE Virtual Developer Day: Java SE, Java EE, Java Emebedded on Jun 19th and 25th http://ow.ly/2xBkwV Markus Eisele #Oracle #JavaSE Critical Patch Update Pre-Release Announcement - June 2013 http://www.oracle.com/technetwork/topics/security/javacpujun2013-1899847.html … #security OracleSupport_WLS ?Simple Custom #JMX MBeans with #WebLogic 12c and #Spring http://pub.vitrue.com/3kEr Oracle Technet Building Java HTML5/WebSocket Applications with JSR 356 - 4pm - Grand Ballroom Salon A/B #qconnewyork WebLogic Community Oracle Fusion Middleware (OFM) 11g (11.1.1.7) Starter Kit available & Customizable Demos http://wp.me/p1LMIb-BK Oracle Technet #Java EE 7: Moving Java Forward for the Enterprise | @java http://pub.vitrue.com/tHiM OTNArchBeat ?Oracle Forms to ADF Modernization Reference - Convero (AMEC) Project | @AndrejusB http://pub.vitrue.com/lZPR WebLogic Community ?ExaLogic In Memory Applications & Whitepapers Building Large Scale E-Commerce Platforms & Rethink the Entire Application Lifecycle… WebLogic Community ?Coherence YouTube videos http://wp.me/p1LMIb-BG Arun Gupta ?WARNING: Next 2 days are going to be loaded with #JavaEE7 launch related tweets, and offline next week! JDeveloper & ADF Using Contextual Event in Oracle ADF http://dlvr.it/3Vpybr Oracle WebLogic Check out new blog on #hybrid_cloud & why choice is important http://bit.ly/1b1QGhL Andrejus Baranovskis Oracle Forms to ADF Modernization Reference - Convero (AMEC) Project http://fb.me/1M9iWNmAw WebLogic Community WebLogic on Oracle Database Appliance by Frances Zhao http://wp.me/p1LMIb-BE OTNArchBeat ?New: A-Team Chronicles >> A great resource for technical content covering Oracle Fusion Middleware / Fusion Apps http://pub.vitrue.com/qbzS Oracle for Partners ?Take Java To The Edge: Java Virtual Developer Day – June 19 & June 25 http://bit.ly/19fGlSX Adam Bien ?Looking forward to tomorrow's #javaee7 + #angularjs #html5 marriage at #jpoint. See you there: http://www.jpoint.nl/meetingpoint/editie-2013#sessie-1 … shay shmeltzer ?There is a new patch for the #Oracle #ADF Mobile extension - use help->check for updates to get it. Frank Munz ?Not using @OracleWebLogic 12c yet? Australia does! Reviews from my @AUSOUG workshops in Brisbane, Adelaide and Perth. http://goo.gl/BfVc4 Arun Gupta ?WebSocket, Server-Sent Events, #JavaEE7 sessions accepted at #jaxlondon ... that's gonna be at least third trip to London this year! WebLogic Community SPARC T5-8 Delivers Best Single System SPECjEnterprise2010 Benchmark running WebLogic 12c http://wp.me/p1LMIb-BC WebLogic Community The Ultimate Java EE Event - 16 Power Workshops mit allen wichtigen Java-EE-Themen http://wp.me/p1LMIb-BY Oracle WebLogic ?@OracleWebLogic 7 Jun New Blog Post: Using try-with-resources with JDBC objects http://ow.ly/2xryb5 JDeveloper & ADF Switching Lists of Values http://dlvr.it/3PbCkw WebLogic Community ?YouTube channel Learning Oracle's ADF http://wp.me/p1LMIb-zA Markus Eisele [GER] RT @heisedc: #Java-Entwicklung in #Oracles Public #Cloud http://heise.de/-1866388/ftw OracleBlogs ?Coherence Incubator & Community Source Code & Release Documentation http://ow.ly/2x2fXK chriscmuir ?New blog post: Migrating ADF Mobile apps from 1.0 to 1.1 https://blogs.oracle.com/onesizedoesntfitall/entry/migrating_adf_mobile_apps_from … JDeveloper & ADF ?ADF JavaScript Partitioning for Performance http://dlvr.it/3Trw15 WebLogic Community WebLogic Server Security Workshop June 27th 2013 Germany http://wp.me/p1LMIb-C7 WebLogic Community Oracle Optimized Solution for WebLogic Server 12c http://wp.me/p1LMIb-BA WebLogic Community Virtualize and Run Your Forms Applications in the Cloud - Now On Demand http://wp.me/p1LMIb-By Lucas Jellema Innteresting presentation on various aspects of end user assistance in Fusion Applications (ADF based): http://www.slideshare.net/uobroin/ouag-ireland-final2012slideshare … Adam Bien ?Summer Of JavaEE Workshops And Gigs: Free Hacking night:11.06.2013, Utrecht JavaEE 7 Meets HTML 5 and AngularJ... http://bit.ly/11XRjt4 WebLogic Community ?Real World ADF Design & Architecture Principles Trainings Germany, Poland & Portugal http://wp.me/p1LMIb-Bw Oracle for Partners ?JAVA Virtual Developer Day – June 19 & June 25 - Watch educational content and engage with Oracle experts online https://oracle.6connex.com/portal/java2013/login/?langR=en_US&mcc=OPNNSL … Markus Eisele ?[blog] Java EE 7 is final. Thoughts, Insights and further Pointers. http://dlvr.it/3SrxnB #javaee7 WebLogic Community Oracle takes the top spot for market share in the Application Server Market Segment for 2012 http://wp.me/p1LMIb-Bu OTNArchBeat ?Oracle ACE Director @LucasJellema is "very pleasantly surprised" with the new ADF Academy. http://pub.vitrue.com/8fad chriscmuir ?Sell out crowd for our ADF architecture course in Munich #adfarch pic.twitter.com/zhNtQJ25JV Markus Eisele ?[blog] New German Article: Java 7 Update 21 Security Improvements http://dlvr.it/3Sc8V9 #java #heise #security Markus Eisele ?[blog] New German Article: Oracle Java Cloud Service http://dlvr.it/3Sc20V #java #heise #OracleCloud OracleSupport_WLS ?Troubleshooting and Tuning with #WebLogic - Developer Webcast now available on #Youtube http://pub.vitrue.com/GSOy Andrejus Baranovskis New ADF Academy - Impressive Concept for ADF eLearning http://fb.me/2kYSMKKR5 OracleSupport_WLS ?Removing a #weblogic domain properly http://pub.vitrue.com/ZndM WebLogic Community WebLogic Partner Community Newsletter May 2013 http://wp.me/p1LMIb-Bp Oracle WebLogic ?Blog: Troubleshooting tools Part 3- Heap Dumps #Oracle #WebLogic Read the series http://bit.ly/14CQSD2 Oracle WebLogic ?Blog: #WebLogic_Server on #Oracle_Database_Appliance- How to conjure a WebLogic cluster- http://bit.ly/11fciHA Oracle WebLogic ?Check out new cool features in Oracle Traffic Director- http://bit.ly/11fbz9h WebLogic Community Additional new material WebLogic Community April 2013 http://wp.me/p1LMIb-zM WebLogic Community New WebLogic references - we want yours http://wp.me/p1LMIb-zK OracleSupport_WLS ?#Weblogic Session Replication jsession ID and F5 http://pub.vitrue.com/dWZp OracleBlogs ?top tweets WebLogic Partner Community May 2013 http://ow.ly/2xc8M5 WebLogic Community Welcome to the Spring edition of Oracle Scene http://wp.me/p1LMIb-zE Andreas Koop ?[blog post] ADF: Static Values View Object does not show any values (solved) http://bit.ly/14RDZ8p OracleBlogs ?ADF Mobile - accessing the SQLite database http://ow.ly/2x85r0 OracleSupport_WLS Youtube channel- Troubleshooting and Tuning with #WebLogic.#JRockit #SOAP #JRF http://pub.vitrue.com/qMxu Arun Gupta Next Java Magazine is all about #JavaEE7...productivity, HTML5, WebSocket, Batch & more. Subscribe http://ow.ly/lkD5D (@Oraclejavamag) Oracle WebLogic How to configure a #WebLogic cluster on #Oracle_Database_Appliance? It’s easy, read how. http://bit.ly/11fciHA Oracle WebLogic ?Blog: How to use Heap Dumps to troubleshooting memory leaks- #Oracle #WebLogic_Server http://bit.ly/14CQSD2 OracleBlogs ?Over 100 Images To Be Added to NetBeans Platform Showcase http://ow.ly/2x7Fvp Lucas Jellema A new release of the ADF EMG Task Flow Tester is now available for both JDeveloper 11 R1 and R2. https://java.net/projects/adf-task-flow-tester/pages/GettingStarted … WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: twitter,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• Charms and the App Bar

  - by Dennis Vroegop

  Ok. I admit. I made a mistake in the last post about our planespotter app. I have dedicated a full part of the hub to Social. I also had a section called Friends but that made sense since I said that “Friends” is a special group of people that connect to each other through our app and only our app. Social however is sharing our spots with Twitter, Facebook and so on. Now, we could write that functionality in our app in a different section but there is one small problem with that: users don’t expect that. Ok, I admit. The mistake was quite deliberate to give me an excuse to write this part. But still: the mistake is one I see a lot. People are trying to do stuff in their application that they shouldn’t be doing. This always strike me as slightly odd: why do some work when others have already done it for you and you can just use it? After all: good developers are lazy (lazy people will always try to find the easiest way to do something and in development land this usually means the cleanest and best to support way…) So. What is that part that Microsoft has done for us and we don’t have to do ourselves? The answer lies on the right hand of your Win8 screen: This is a screenshot of my tablet (as you can see I am writing this right now….) When I swipe my finger from out of the screen on the right inside the screen (or move the mouse to the upper right corner) this menu will appear. Next to settings and the start menu button we’ll find the Search and the Share charms. These are two ways that your app can share the information it contains with the rest of the world, or at least: the rest of your system. So don’t write a Search feature in your app. Don’t write a Share feature in your app. It’s here already. Users, once they are used to Windows 8, will use that feature and expect it to work. If it doesn’t, they won’t like your app and you can kiss you dreams of everlasting fame goodbye. So use these two. What are they? Well, simply they are parts of a contract. In your app you say somewhere in code that you are supporting Search and Share. So when the user selects Share the system will interrogate the current app in the foreground if it supports this feature. Your app will say “But why, yes, I do!” Then the system will ask the app “Ok then, wisecrack, then share!” and you will have to provide the system with some information about the format. Other applications have subscribed to be at the receiving end of the Share contract. They have told the system that they support Sharing (receiving) and which formats they understand. If one or more of them support the formats you specify, the user will see them. The user clicks / taps on the app of their choice and data is moved from your app to the new one. So if you say you support Facebook and Twitter users can post data from your app to these networks by selecting Share. The same applies to Search. Don’t make a “search” button in your app but use the contract to tell the system that you support search and use that instead. Users will be grateful (remember that bar with men/women/creatures that are waiting for you?) The more and more people get to know Windows 8, the more they will use this. And if you are one of the people who wrote an app that helped them learn the system, well, that’s even better. So. We don’t have a Share or a Search button. We do have other buttons. Most important: we probably need a “New Spot” button. And a “Filter” might be useful. Or someway to open the camera so you can add a picture to the spot. Where will be put those? The answer is the “Appbar” . This is a application / context aware menu that slides up from the bottom of the screen when you move your finger / mouse from below the screen into it. From above downwards works just as well. Here you see an example of the appbar from the People app. (click on it for a larger version). This appears whenever you slide your finger up from below of down from above. This is where you put your commands. Remember, this is context aware so this menu will change when you are in different parts of your app or when you have selected different items. There are a few conventions when you create this appbar. First, the items on the right are “General” items, meaning they have little to do with what is on the screen right now. I think this would be a great place to add our “New Spot” icon. On the far left are items associated with the current selected item or screen. So if you have a spot selected, the button for Add Photo should be visible here and on the left hand side. Not everything is as clear as this, but this is what you should strive for. Group items together. And please note: this is the only place in Metro design where we are allowed to use lines as separators. So when you want to separate a group of icons from another group, add a line. Also note the simplicity of the buttons. No colors, no lights or shadows, no 3D. After a couple of years of fancy almost realistic looking icons people have finally decided that hey, this is a virtual world: it’s ok to look virtual as well. So make things as readable and clear as possible and don’t try to duplicate nature. It’s all about the information, remember? (If you don’t remember I’d like to point you to a older blog post of mine about the what and why of Metro). So.. think about the buttons a bit and think about Share and Search. What will you put there? Remember: this is the way the users interact with your apps and while you shouldn’t judge a book by its covers when it comes to people, this isn’t entirely so when it comes to apps. People DO judge an app by its looks and the way it feels. Take advantage of that. History has learned that a crappy app with a GREAT user interface gets better reviews than a GREAT app with a lousy UI… I know: developers will find this extremely unfair but that’s the world we live in (No, I am not saying you should deliver rubbish apps). Next time: we’ll start by building the darn thing!

  Read the article

• XBRL US Conference Highlights

  - by john.orourke(at)oracle.com

  Back in early November I had an opportunity to attend the XBRL US National Conference in Philadelphia.  At the event, XBRL US announced that Oracle had joined the initiative, so I had a chance to participate in a press conference and attend a number of sessions.  Oracle joined XBRL US so we can stay ahead of the standard and leverage it in our products, and to help drive awareness with customers and improve adoption of XBRL. There were roughly 250 attendees at the event, about half of which were vendors and consultants and the rest financial reporting staff from corporate filers.  Event sponsors included Ernst & Young, SWIFT and Fujitsu.  There were also a number of XBRL technology and service providers exhibiting at the conference.  On Monday Nov. 8th, the XBRL US Steering Committee meetings and Annual Members meeting and reception were held.  At the Annual Members meeting the big news was that current XBRL US President, Mark Bolgiano, is moving to a new position at Howard Hughes Medical Center.  Campbell Pryde, who had led the Taxonomy Development for XBRL US, is taking over as XBRL US President. Other items that were highlighted at the members meeting included: The US GAAP XBRL taxonomy is being used by over 1500 SEC filers and has now been handed over to the FASB to maintain and enhance 16 filer training events were held in 2010 XBRL Global Magazine was launched Corporate Actions proposal was submitted to the SEC with SWIFT in May XBRL Labs for iPhone, XBRL US Consistency Suite launched ISO 2022 Corporate Actions Alignment with XBRL achieved The XBRL Credit Rating taxonomy was accepted Tuesday Nov. 9th included Keynotes, General Sessions, Innovation Workshop for Governments and Securities Professionals, and an Opening Reception.  General sessions included: Lessons Learned from the SEC's rollout of XBRL.  More than 18,000 errors were identified in reviews of filings between June 2009 and September 2010.  Most of these related to negative values being used where they shouldn't have.  Also, the SEC feels there are too many taxonomy extensions being created - mostly in the Cash Flow Statements.  They emphasize using existing elements in the US GAAP taxonomy and advise filers not to  create extensions to improve the visual formatting of XBRL filings. Investors and XBRL - Setting the Standard for Data Quality.  In this panel discussion, the key learning was that CFA's, academics and the financial community are not using XBRL as expected.  The issues raised include the  accuracy and completeness of filings, number of taxonomy extensions, and limited number of tools available to help analyze XBRL data.  Another big issue that was raised is the lack of historic results in XBRL - most analysts need 10 quarters of historic data.  On the positive side, XBRL has the potential to eliminate re-keying of data and errors here and can improve analytic capabilities for financial analysts once more historic data is available and more companies are providing detailed tagging of their filings. A US Roadmap for XBRL Financial Reporting.  This was a panel discussion featuring Jeff Neumann(SEC), Campbell Pryde(XBRL US), and Louis Matherne(FASB).  Key points included the fact that XBRL is currently used by 1500 companies, with 8000 more companies coming in 2011.  XBRL for Mutual Fund Reporting will start in 2011 for 8000 funds, and a Credit Rating Taxonomy has now been submitted for review.  The XBRL tagging/filing process is improving each quarter - more education is helping here.  The FASB is looking at extensions to date, and potential additions to US GAAP taxonomy, while the SEC is evaluating filings for accuracy, consistency in tagging, and tools for analyzing data.  The big news is that the FASB 2011 US GAAP Taxonomy has been completed and reviewed by SEC.  The 2011 US GAAP Taxonomy supports new FASB accounting standards issued since 2009, has new taxonomy elements for certain industries (i.e airlines) and the elimination of 500 concepts.  (meaning they can't be used going forward but are still supported for historical comparison)  The 2011 US GAAP Taxonomy will be available for usage with Q2 2011 SEC filings.  More information about this can be found on the FASB web site.  http://www.fasb.org/home Accounting Firms and XBRL.  This session covered the Role of Audit Firms, which includes awareness and education, validation of XBRL filings, and in-house transition planning.  The main advice provided was that organizations should document XBRL mapping process, perform peer comparisons, and risk assessments on a regular basis. Wednesday Nov. 10th included more Keynotes, General Sessions on Corporate Actions, and XBRL Essentials Workshop Training for corporate filers.  The XBRL Essentials Training included: Getting Started Once you Have the Basics Detailed Footnote Tagging and Handling Tables Quality Control and Trust in the XBRL Process Bringing XBRL In-House:  What are the Options, What should you consider? The US GAAP Financial Reporting Taxonomy - Overview of the 2011 release The XBRL Essentials Training was well-attended with about 80 people.  This included a good overview of the SEC's XBRL mandate, limited liability issue, tagging levels, recommended planning process, internal vs. outsourced approach, and how to manage service providers.  I learned a lot from the session on detailed tagging.  This is the requirement that kicks in during a company's second year of XBRL filing with the SEC and applies to financial statements, footnotes and disclosures (it does not apply to MD&A, executive communications and other information).  The review of the Linkbase model, or dimensional table structure, was very interesting and can be complex to understand.  The key takeaway here is that using dimensional tables in XBRL filings can help limit the number of taxonomy extensions that are required.  The slides from this session are posted on the XBRL US web site. (http://xbrl.us/events/Pages/archive.aspx) For me, the main summary points and takeaways from the XBRL US conference are: XBRL for financial reporting has turned the corner and gone mainstream - with 1500 companies currently using it and 8000 more coming in 2011 The expected value is not being achieved by filers or consumers of XBRL data - this will improve when more companies are filing in XBRL, more history is available, and more software tools are available for analysis (hmm, sounds like an opportunity for Oracle) XBRL is becoming the global standard for all business communications beyond just the financials - i.e. adoption for mutual funds, corporate actions and others planned for the future If you would like to learn more about XBRL and the various training programs, services and software tools that are available check out the XBRL US web site and even better - become a member.  Here's a link:  http://xbrl.us/Pages/default.aspx

  Read the article

• You Say You Want a (Customer Experience) Revolution

  - by Christie Flanagan

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} rev-o-lu-tion [rev-uh-loo-shuhn] noun 1. a sudden, radical or complete change 2. fundamental change in the way of thinking about or visualizing something; a change of paradigm 3. a changeover in use or preference especially in technology <the computer revolution> Lately, I've been hearing an awful lot about the customer experience revolution.  Tonight Oracle will be hosting The Experience Revolution, an evening of exploration and networking with customer experience executives in New York City where Oracle President Mark Hurd will introduce Oracle Customer Experience, a cross-stack suite of customer experience products that includes Oracle WebCenter and a number of other Oracle technologies. Then on Tuesday and Wednesday, the Forrester Customer Experience Forum East also kicks off in New York City where they'll examine how businesses can "reap the full business benefits of the customer experience revolution." So, are we in the midst of a customer experience revolution? As a consumer, I can answer that question with a definitive “yes.” When I bought my very first car, I had a lot of questions. How do I know if I’m paying a fair price? How do I know if this dealer is honest? Why do I have to sit through these good cop, bad cop shenanigans between sales and sales management at the dealership? Why do I feel like I’m doing these people a favor by giving them my business? In the end the whole experience left me feeling deeply unsatisfied. I didn’t feel that I held all that much power over the experience and the only real negotiating trick I had was to walk out, which I did, many times before actually making a purchase. Fast forward to a year ago and I found myself back in the market for a new car. The very first car that I bought had finally kicked the bucket after many years, many repair bills, and much wear and tear. Man, I had loved that car. It was time to move on, but I had a knot in my stomach when I reflected back on my last car purchase experience and dreaded the thought of going through that again. Could that have been the reason why I drove my old car for so long? But as I started the process of researching new cars, I started to feel really confident. I had a wealth of online information that helped me in my search. I went to Edmunds and plugged in some information on my preferences and left with a short list of vehicles. After an afternoon spent test driving the cars my short list, I had determined my favorite – it was a model I didn’t even know about until my research on Edmunds! But I didn’t want to go back to the dealership where I test drove it. They were clearly old school and wanted me to buy the way that they wanted to sell. No thanks! After that I went back online. I figured out exactly what people had paid for this car in my area. I found out what kind of discount others were able to negotiate from an online community forum dedicated to the make and model. I found out how the sales people were being incentivized by the manufacturer that month. I learned which dealers had the best ratings and reviews. This was actually getting exciting. I was feeling really empowered. My next step was to request online quotes from the some of the highest rated dealers but I already knew exactly how much I was going to pay. This was really a test for the dealers. My new mantra was “let he who delivers the best customer experience win.” An inside sales rep from one dealer responded to my quote request within a couple of hours. I told him I had already decided on the make and model and it was just a matter of figuring out who I would buy it from. I also told them that I was really busy and wouldn’t set foot in the dealership unless we had come to terms beforehand. Lastly, I let him know that I’d prefer to work out the details via email. He promised to get back to me shortly with a detailed quote. Over the next few days I received calls from other dealers. One asked me a host of questions that I had already answered in their lengthy online form. Another blamed their website performance issues for their delay in responding to my request. But by then it didn’t really matter because I’d already bought the car days before from the dealer who responded to me first and who was willing to adjust their sales process to accommodate my buying one. So, yes, I really do believe we are in the midst of a customer experience revolution. And every revolution leaves some victorious and other vanquished. Which side do you want to be on when it comes to the customer experience revolution?

  Read the article

• Integrate Google Wave With Your Windows Workflow

  - by Matthew Guay

  Have you given Google Wave a try, only to find it difficult to keep up with?  Here’s how you can integrate Google Wave with your desktop and workflow with some free and simple apps. Google Wave is an online web app, and unlike many Google services, it’s not easily integrated with standard desktop applications.  Instead, you’ll have to keep it open in a browser tab, and since it is one of the most intensive HTML5 webapps available today, you may notice slowdowns in many popular browsers.  Plus, it can be hard to stay on top of your Wave conversations and collaborations by just switching back and forth between the website and whatever else you’re working on.  Here we’ll look at some tools that can help you integrate Google Wave with your workflow, and make it feel more native in Windows. Use Google Wave Directly in Windows What’s one of the best ways to make a web app feel like a native application?  By making it into a native application, of course!  Waver is a free Air powered app that can make the mobile version of Google Wave feel at home on your Windows, Mac, or Linux desktop.  We found it to be a quick and easy way to keep on top of our waves and collaborate with our friends. To get started with Waver, open their homepage on the Adobe Air Marketplace (link below) and click Download From Publisher. Waver is powered by Adobe Air, so if you don’t have Adobe Air installed, you’ll need to first download and install it. After clicking the link above, Adobe Air will open a prompt asking what you wish to do with the file.  Click Open, and then install as normal. Once the installation is finished, enter your Google Account info in the window.   After a few moments, you’ll see your Wave account in miniature, running directly in Waver.  Click a Wave to view it, or click New wave to start a new Wave message.  Unfortunately, in our tests the search box didn’t seem to work, but everything else worked fine. Google Wave works great in Waver, though all of the Wave features are not available since it is running the mobile version of Wave. You can still view content from plugins, including YouTube videos, directly in Waver.   Get Wave Notifications From Your Windows Taskbar Most popular email and Twitter clients give you notifications from your system tray when new messages come in.  And with Google Wave Notifier, you can now get the same alerts when you receive a new Wave message. Head over to the Google Wave Notifier site (link below), and click the download link to get started.  Make sure to download the latest Binary zip, as this one will contain the Windows program rather than the source code. Unzip the folder, and then run GoogleWaveNotifier.exe. On first run, you can enter your Google Account information.  Notice that this is not a standard account login window; you’ll need to enter your email address in the Username field, and then your password below it. You can also change other settings from this dialog, including update frequency and whether or not to run at startup.  Click the value, and then select the setting you want from the dropdown menu. Now, you’ll have a new Wave icon in your system tray.  When it detects new Waves or unread updates, it will display a popup notification with details about the unread Waves.  Additionally, the icon will change to show the number of unread Waves.  Click the popup to open Wave in your browser.  Or, if you have Waver installed, simply open the Waver window to view your latest Waves. If you ever need to change settings again in the future, right-click the icon and select Settings, and then edit as above. Get Wave Notifications in Your Email  Most of us have Outlook or Gmail open all day, and seldom leave the house without a Smartphone with push email.  And thanks to a new Wave feature, you can still keep up with your Waves without having to change your workflow. To activate email notifications from Google Wave, login to your Wave account, click the arrow beside your Inbox, and select Notifications. Select how quickly you want to receive notifications, and choose which email address you wish to receive the notifications.  Click Save when you’re finished. Now you’ll receive an email with information about new and updated Waves in your account.  If there were only small changes, you may get enough info directly in the email; otherwise, you can click the link and open that Wave in your browser. Conclusion Google Wave has great potential as a collaboration and communications platform, but by default it can be hard to keep up with what’s going on in your Waves.  These apps for Windows help you integrate Wave with your workflow, and can keep you from constantly logging in and checking for new Waves.  And since Google Wave registration is now open for everyone, it’s a great time to give it a try and see how it works for yourself. Links Signup for Google Wave (Google Account required) Download Waver from the Adobe Air Marketplace Download Google Wave Notifier Similar Articles Productive Geek Tips We Have 20 Google Wave Invites. Want One?Tired of Waiting for Google Wave? Try ShareFlow NowIntegrate Google Docs with Outlook the Easy WayAwesome Desktop Wallpapers: The Windows 7 EditionWeek in Geek: The Stupid Geek Tricks to Hide Extra Windows Edition TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Default Programs Editor – One great tool for Setting Defaults Convert BMP, TIFF, PCX to Vector files with RasterVect Free Identify Fonts using WhatFontis.com Windows 7’s WordPad is Actually Good Greate Image Viewing and Management with Zoner Photo Studio Free Windows Media Player Plus! – Cool WMP Enhancer

  Read the article

• Get Information to Your Blog with Microsoft Broadcaster

  - by Matthew Guay

  Do you often have people ask you for advice about technology, or do you write tech-focused blog or newsletter?  Here’s how you can get information to share with your readers about Microsoft technology with Microsoft Broadcaster. Microsoft Broadcaster is a new service from Microsoft to help publishers, bloggers, developers, and other IT professionals find relevant information and resources from Microsoft.  You can use it to help discover things to write about, or simply discover new information about the technology you use.  Broadcaster will also notify you when new resources are available about the topics that interest you.  Let’s look at how you could use this to expand your blog and help your users. Getting Started Head over to the Microsoft Broadcaster site (link below), and click Join to get started. Sign in with your Windows Live ID, or create a new account if you don’t already have one. Near the bottom of the page, add information about your blog, newsletter, or group that you want to share Broadcaster information with.  Click Add when you’re done entering information.  You can enter as many sites or groups as you wish. When you’ve entered all of your information, click the Apply button at the bottom of the page.  Broadcaster will then let you know your information has been submitted, but you’ll need to wait several days to see if you are approved or not. Our application was approved about 2 days after applying, though this may vary.  When you’re approved, you’ll receive an email letting you know.  Return to the Broadcaster website (link below), but this time, click Sign in. Accept the terms of use by clicking I Accept at the bottom of the page. Confirm that your information entered previously is correct, and then click Configure my keywords at the bottom of the page. Now you can pick the topics you want to stay informed about.  Type keywords in the textbox, and it will bring up relevant topics with IntelliSense. Here we’ve added several topics to keep up with. Next select the Microsoft Products you want to keep track of.  If the product you want to keep track of is not listed, make sure to list it in the keywords section as above. Finally, select the types of content you wish to see, including articles, eBooks, webcasts, and more. Finally, when everything’s entered, click Configure My Alerts at the bottom of the page. Broadcaster can automatically email you when new content is found.  If you would like this, click Subscribe.  Otherwise, simply click Access Dashboard to go ahead and find your personalized content. If you choose to receive emails of new content, you’ll have to configure it with Windows Live Alerts.  Click Continue to set this up. Select if you want to receive Messenger alerts, emails, and/or text messages when new content is available.  Click Save when you’re finished. Finally, select how often you want to be notified, and then click Access Dashboard to view the content currently available. Finding Content For Your Blog, Site, or Group Now you can find content specified for your interests from the dashboard.  To access the dashboard in the future, simply go to the Broadcaster site and click Sign In. Here you can see available content, and can search for different topics or customize the topics shown. You’ll see snippets of information from various Microsoft videos, articles, whitepapers, eBooks, and more, depending on your settings.  Click the link at the top of the snippet to view the content, or right-click and copy the link to use in emails or on social networks like Twitter. If you’d like to add this snippet to your website or blog, click the Download content link at the bottom.   Now you can preview what the snippet will look like on your site, and change the width or height to fit your site.  You can view and edit the source code of the snippet from the box at the bottom, and then copy it to use on your site. Copy the code, and paste it in the HTML of a blog post, email, webpage, or anywhere else you wish to share it.  Here we’re pasting it into the HTML editor in Windows Live Writer so we can post it to a blog. After adding a title and opening paragraph, we have a nice blog post that only took a few minutes to put together but should still be useful for our readers.  You can check out the blog post we created at the link below. Readers can click on the links, which will direct them to the content on Microsoft’s websites. Conclusion If you frequently need to find educational and informative content about Microsoft products and services, Broadcaster can be a great service to keep you up to date.  The service worked quite good in our tests, and generally found relevant content to our keywords.  We had difficulty embedding links to eBooks that were listed by Broadcaster, but everything else worked for us.  Now you can always have high quality content to help your customers, coworkers, friends, and more, and you just might find something that will help you, too! Link Microsoft Broadcaster (registration required) Example Post at Techinch.com with Content from Microsoft Broadcaster Similar Articles Productive Geek Tips Create An Electronic Business Card In Outlook 2007Mysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPAnnouncing the How-To Geek BlogsNew Vista Syntax for Opening Control Panel Items from the Command-lineHow To Create and Publish Blog Posts in Word 2010 & 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Fix Common Inkjet Printer Errors Dual Boot Ubuntu and Windows 7 What is HTML5? Default Programs Editor – One great tool for Setting Defaults Convert BMP, TIFF, PCX to Vector files with RasterVect Free Identify Fonts using WhatFontis.com

  Read the article

• Beginner’s Guide to Flock, the Social Media Browser

  - by Asian Angel

  Are you wanting a browser that can work as a social hub from the first moment that you start it up? If you love the idea of a browser that is ready to go out of the box then join us as we look at Flock. During the Install Process When you are installing Flock there are two install windows that you should watch for. The first one lets you choose between the “Express Setup & Custom Setup”. We recommend the “Custom Setup”. Once you have selected the “Custom Setup” you can choose which of the following options will enabled. Notice the “anonymous usage statistics” option at the bottom…you can choose to leave this enabled or disable it based on your comfort level. The First Look When you start Flock up for the first time it will open with three tabs. All three are of interest…especially if this is your first time using Flock. With the first tab you can jump right into “logging in/activating” favorite social services within Flock. This page is set to display each time that you open Flock unless you deselect the option in the lower left corner. The second tab provides a very nice overview of Flock and its’ built-in social management power. The third and final page can be considered a “Personal Page”. You can make some changes to the content displayed for quick and easy access and/or monitoring “Twitter Search, Favorite Feeds, Favorite Media, Friend Activity, & Favorite Sites”. Use the “Widget Menu” in the upper left corner to select the “Personal Page Components” that you would like to use. In the upper right corner there is a built-in “Search Bar” and buttons for “Posting to Your Blog & Uploading Media”. To help personalize the “My World Page” just a bit more you can even change the text to your name or whatever best suits your needs. The Flock Toolbar The “Flock Toolbar” is full of social account management goodness. In order from left to right the buttons are: My World (Homepage), Open People Sidebar, Open Media Bar, Open Feeds Sidebar, Webmail, Open Favorites Sidebar, Open Accounts and Services Sidebar, Open Web Clipboard Sidebar, Open Blog Editor, & Open Photo Uploader. The buttons will be “highlighted” with a blue background to help indicate which area you are in. The first area will display a listing of people that you are watching/following at the services shown here. Clicking on the “Media Bar Button” will display the following “Media Slider Bar” above your “Tab Bar”. Notice that there is a built-in “Search Bar” on the right side. Any photos, etc. clicked on will be opened in the currently focused tab below the “Media Bar”. Here is a listing of the “Media Streams” available for viewing. By default Flock will come with a small selection of pre-subscribed RSS Feeds. You can easily unsubscribe, rearrange, add custom folders, or non-categorized feeds as desired. RSS Feeds subscribed to here can be viewed combined together as a single feed (clickable links) in the “My World Page”. or can be viewed individually in a new tab. Very nice! Next on the “Flock Toolbar is the “Webmail Button”. You can set up access to your favorite “Yahoo!, Gmail, & AOL Mail” accounts from here. The “Favorites Sidebar” combines your “Browser History & Bookmarks” into one convenient location. The “Accounts and Services Sidebar” gives you quick and easy access to get logged into your favorite social accounts. Clicking on any of the links will open that particular service’s login page in a new tab. Want to store items such as photos, links, and text to add into a blog post or tweet later on? Just drag and drop them into the “Web Clipboard Sidebar” for later access. Clicking on the “Blog Editor Button” will open up a separate blogging window to compose your posts in. If you have not logged into or set up an account yet in Flock you will see the following message window. The “Blogging Window”…nice, simple, and straightforward. If you are not already logged into your photo account(s) then you will see the following message window when you click on the “Photo Uploader Button”. Clicking “OK” will open the “Accounts and Services Sidebar” with compatible photo services highlighted in a light yellow color. Log in to your favorite service to start uploading all those great images. After Setting Up Here is what our browser looked like after setting up some of our favorite services. The Twitter feed is certainly looking nice and easy to read through… Some tweaking in the “RSS Feeds Sidebar” makes for a perfect reading experience. Keeping up with our e-mail is certainly easy to do too. A look back at the “Accounts and Services Sidebar” shows that all of our accounts are actively logged in (green dot on the right side). Going back to our “My World Page” you can see how nice everything looks for monitoring our “Friend Activity & Favorite Feeds”. Moving on to regular browsing everything is looking very good… Flock is a perfect choice for anyone wanting a browser and social hub all built into a single app. Conclusion Anyone who loves keeping up with their favorite social services while browsing will find using Flock to be a wonderful experience. You literally get the best of both worlds with this browser. Links Download Flock The Official Flock Extensions Homepage The Official Flock Toolbar Homepage Similar Articles Productive Geek Tips Add Color Coding to Windows 7 Media Center Program GuideAdd Social Bookmarking (Digg This!) Links to your Wordpress BlogHow to use an ISO image on Ubuntu LinuxAdvertise on How-To GeekFixing When Windows Media Player Library Won’t Let You Add Files TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause

  Read the article

• Pet Peeves with the Windows Phone 7 Marketplace

  - by Bil Simser

  Have you ever noticed how something things just gnaw at your very being. This is the case with the WP7 marketplace, the Zune software, and the things that drive me batshit crazy with a side of fries. To go. I wanted to share. XBox Live is Not the Centre of the Universe Okay, it’s fine that the Zune software has an XBox live tag for games so can see them clearly but do we really need to have it shoved down our throats. On every click? Click on Games in the marketplace: The first thing that it defaults to on the filters on the right is XBox Live: Okay. Fine. However if you change it (say to Paid) then click onto a title when you come back from that title is the filter still set to Paid? No. It’s back to XBox Live again. Really? Give us a break. If you change to any filter on any other genre then click on the selected title, it doesn’t revert back to anything. It stays on the selection you picked. Let’s be fair here. The Games genre should behave just like every other one. If I pick Paid then when I come back to the list please remember that. Double Dipping On the subject of XBox Live titles, Microsoft (and developers who have an agreement with Microsoft to produce Live titles, which generally rules out indie game developers) is double dipping with regards to exposure of their titles. Here’s the Puzzle and Trivia Game section on the Marketplace for XBox Live titles: And here’s the same category filtered on Paid titles: See the problem? Two indie titles while the rest are XBox Live ones. So while XBL has it’s filter, they also get to showcase their wares in the Paid and Free filters as well. If you’re going to have an XBox Live filter then use it and stop pushing down indie titles until they’re off the screen (on some genres this is already the case). Free and Paid titles should be just that and not include XBox Live ones. If you’re really stoked that people can’t find the Free XBox Live titles vs. the paid ones, then create a Free XBox Live filter and a Paid XBox Live filter. I don’t think we would mind much. Whose Trial is it Anyways? You might notice apps in the marketplace with titles like “My Fart App Professional Lite” or “Silicon Lamb Spleen Builder Free”. When you submit and app to the marketplace it can either be free or paid. If it’s a paid app you also have the option to submit it with Trial capabilities. It’s up to you to decide what you offer in the trial version but trial versions can be purchased from within the app so after someone trys out your app (for free) and wants to unlock the Super Secret Obama Spy Ring Level, they can just go to the marketplace from your app (if you built that functionality in) and upgrade to the paid version. However it creates a rift of sorts when it comes to visibility. Some developers go the route of the paid app with a trial version, others decide to submit *two* apps instead of one. One app is the “Free” or “Lite” verions and the other is the paid version. Why go to the hassle of submitting two apps when you can just create a trial version in the same app? Again, visibility. There’s no way to tell Paid apps with Trial versions and ones without (it’s an option, you don’t have to provide trial versions, although I think it’s a good idea). However there is a way to see the Free apps from the Paid ones so some submit the two apps and have the Free version have links to buy the paid one (again through the Marketplace tasks in the API). What we as developers need for visibility is a new filter. Trial. That’s it. It would simply filter on Paid apps that have trial capabilities and surface up those apps just like the free ones. If Microsoft added this filter to the marketplace, it would eliminate the need for people to submit their “Free” and “Lite” versions and make it easier for the developer not to have to maintain two systems. I mean, is it really that hard? Can’t be any more difficult than the XBox Live Filter that’s already there. Location is Everything The last thing on my bucket list is about location. When I launch Zune I’m running in my native location setting, Canada. What’s great is that I navigate to the Travel Tools section where I have one of my apps and behold the splendour that I see: There are my apps in the number 1 and number 4 slot for top selling in that category. I show it to my wife to make up for the sleepless nights writing this stuff and we dance around and celebrate. Then I change my location on my operation system to United States and re-launch Zune. WTF? My flight app has slipped to the 10th spot (I’m only showing 4 across here out of the 7 in Zune) and my border check app that was #1 is now in the 32nd spot! End of celebration. Not only is relevance being looked at here, I value the comments people make on may apps as do most developers. I want to respond to them and show them that I’m listening. The next version of my border app will provide multiple camera angles. However when I’m running in my native Canada location, I only see two reviews. Changing over to United States I see fourteen! While there are tools out there to provide with you a unified view, I shouldn’t have to rely on them. My own Zune desktop software should allow me to see everything. I realize that some developers will submit an app and only target it for some locations and that’s their choice. However I shouldn’t have to jump through hoops to see what apps are ahead of mine, or see people comments and ratings. Another proposal. Either unify the marketplace (i.e. when I’m looking at it show me everything combined) or let me choose a filter. I think the first option might be difficult as you’re trying to average out top selling apps across all markets and have to deal with some apps that have been omitted from some markets. Although I think you could come up with a set of use cases that would handle that, maybe that’s too much work. At the very least, let us developers view the markets in a drop down or something from within the Zune desktop. Having to shut down Zune, change our location, and re-launch Zune to see other perspectives is just too onerous. A Call to Action These are just one mans opinion. Do you agree? Disagree? Feel hungry for a bacon sandwich? Let everyone know via the comments below. Perhaps someone from Microsoft will be reading and take some of these ideas under advisement. Maybe not, but at least let’s get the word out that we really want to see some change. Egypt can do it, why not WP7 developers!

  Read the article

• The Birth of a Method - Where did OUM come from?

  - by user702549

  It seemed fitting to start this blog entry with the OUM vision statement. The vision for the Oracle® Unified Method (OUM) is to support the entire Enterprise IT lifecycle, including support for the successful implementation of every Oracle product.  Well, it’s that time of year again; we just finished testing and packaging OUM 5.6.  It will be released for general availability to qualifying customers and partners this month.  Because of this, I’ve been reflecting back on how the birth of Oracle’s Unified method - OUM came about. As the Release Director of OUM, I’ve been honored to package every method release.  No, maybe you’d say it’s not so special.  Of course, anyone can use packaging software to create an .exe file.  But to me, it is pretty special, because so many people work together to make each release come about.  The rich content that results is what makes OUM’s history worth talking about.   To me, professionally speaking, working on OUM, well it’s been “a labor of love”.  My youngest child was just 8 years old when OUM was born, and she’s now in High School!  Watching her grow and change has been fascinating, if you ask her, she’s grown up hearing about OUM.  My son would often walk into my home office and ask “How is OUM today, Mom?”  I am one of many people that take care of OUM, and have watched the method “mature” over these last 6 years.  Maybe that makes me a "Method Mom" (someone in one of my classes last year actually said this outloud) but there are so many others who collaborate and care about OUM Development. I’ve thought about writing this blog entry for a long time just to reflect on how far the Method has come. Each release, as I prepare the OUM Contributors list, I see how many people’s experience and ideas it has taken to create this wealth of knowledge, process and task guidance as well as templates and examples.  If you’re wondering how many people, just go into OUM select the resources button on the top of most pages of the method, and on that resources page click the ABOUT link. So now back to my nostalgic moment as I finished release 5.6 packaging.  I reflected back, on all the things that happened that cause OUM to become not just a dream but to actually come to fruition.  Here are some key conditions that make it possible for each release of the method: A vision to have one method instead of many methods, thereby focusing on deeper, richer content People within Oracle’s consulting Organization  willing to contribute to OUM providing Subject Matter Experts who are willing to write down and share what they know. Oracle’s continued acquisition of software companies, the need to assimilate high quality existing materials from these companies The need to bring together people from very different backgrounds and provide a common language to support Oracle Product implementations that often involve multiple product families What came first, and then what was the strategy? Initially OUM 4.0 was based on Oracle’s J2EE Custom Development Method (JCDM), it was a good “backbone”  (work breakdown structure) it was Unified Process based, and had good content around UML as well as custom software development.  But it needed to be extended in order to achieve the OUM Vision. What happened after that was to take in the “best of the best”, the legacy and acquired methods were scheduled for assimilation into OUM, one release after another.  We incrementally built OUM.  We didn’t want to lose any of the expertise that was reflected in AIM (Oracle’s legacy Application Implementation Method), Compass (People Soft’s Application implementation method) and so many more. When was OUM born? OUM 4.1 published April 30, 2006.  This release allowed Oracles Advanced Technology groups to begin the very first implementations of Fusion Middleware.  In the early days of the Method we would prepare several releases a year.  Our iterative release development cycle began and continues to be refined with each Method release.  Now we typically see one major release each year. The OUM release development cycle is not unlike many Oracle Implementation projects in that we need to gather requirements, prioritize, prepare the content, test package and then go production.  Typically we develop an OUM release MoSCoW (must have, should have, could have, and won’t have) right after the prior release goes out.   These are the high level requirements.  We break the timeframe into increments, frequent checkpoints that help us assess the content and progress is measured through frequent checkpoints.  We work as a team to prioritize what should be done in each increment. Yes, the team provides the estimates for what can be done within a particular increment.  We sometimes have Method Development workshops (physically or virtually) to accelerate content development on a particular subject area, that is where the best content results. As the written content nears the final stages, it goes through edit and evaluation through peer reviews, and then moves into the release staging environment.  Then content freeze and testing of the method pack take place.  This iterative cycle is run using the OUM artifacts that make sense “fit for purpose”, project plans, MoSCoW lists, Test plans are just a few of the OUM work products we use on a Method Release project. In 2007 OUM 4.3, 4.4 and 4.5 were published.  With the release of 4.5 our Custom BI Method (Data Warehouse Method FastTrack) was assimilated into OUM.  These early releases helped us align Oracle’s Unified method with other industry standards Then in 2008 we made significant changes to the OUM “Backbone” to support Applications Implementation projects with that went to the OUM 5.0 release.  Now things started to get really interesting.  Next we had some major developments in the Envision focus area in the area of Enterprise Architecture.  We acquired some really great content from the former BEA, Liquid Enterprise Method (LEM) along with some SMEs who were willing to work at bringing this content into OUM.  The Service Oriented Architecture content in OUM is extensive and can help support the successful implementation of Fusion Middleware, as well as Fusion Applications. Of course we’ve developed a wealth of OUM training materials that work also helps to improve the method content.  It is one thing to write “how to”, and quite another to be able to teach people how to use the materials to improve the success of their projects.  I’ve learned so much by teaching people how to use OUM. What's next? So here toward the end of 2012, what’s in store in OUM 5.6, well, I’m sure you won’t be surprised the answer is Cloud Computing.   More details to come in the next couple of weeks!  The best part of being involved in the development of OUM is to see how many people have “adopted” OUM over these six years, Clients, Partners, and Oracle Consultants.  The content just gets better with each release.   I’d love to hear your comments on how OUM has evolved, and ideas for new content you’d like to see in the upcoming releases.

  Read the article

• Testing Workflows &ndash; Test-After

  - by Timothy Klenke

  Originally posted on: http://geekswithblogs.net/TimothyK/archive/2014/05/30/testing-workflows-ndash-test-after.aspxIn this post I’m going to outline a few common methods that can be used to increase the coverage of of your test suite.  This won’t be yet another post on why you should be doing testing; there are plenty of those types of posts already out there.  Assuming you know you should be testing, then comes the problem of how do I actual fit that into my day job.  When the opportunity to automate testing comes do you take it, or do you even recognize it? There are a lot of ways (workflows) to go about creating automated tests, just like there are many workflows to writing a program.  When writing a program you can do it from a top-down approach where you write the main skeleton of the algorithm and call out to dummy stub functions, or a bottom-up approach where the low level functionality is fully implement before it is quickly wired together at the end.  Both approaches are perfectly valid under certain contexts. Each approach you are skilled at applying is another tool in your tool belt.  The more vectors of attack you have on a problem – the better.  So here is a short, incomplete list of some of the workflows that can be applied to increasing the amount of automation in your testing and level of quality in general.  Think of each workflow as an opportunity that is available for you to take. Test workflows basically fall into 2 categories:  test first or test after.  Test first is the best approach.  However, this post isn’t about the one and only best approach.  I want to focus more on the lesser known, less ideal approaches that still provide an opportunity for adding tests.  In this post I’ll enumerate some test-after workflows.  In my next post I’ll cover test-first. Bug Reporting When someone calls you up or forwards you a email with a vague description of a bug its usually standard procedure to create or verify a reproduction plan for the bug via manual testing and log that in a bug tracking system.  This can be problematic.  Often reproduction plans when written down might skip a step that seemed obvious to the tester at the time or they might be missing some crucial environment setting. Instead of data entry into a bug tracking system, try opening up the test project and adding a failing unit test to prove the bug.  The test project guarantees that all aspects of the environment are setup properly and no steps are missing.  The language in the test project is much more precise than the English that goes into a bug tracking system. This workflow can easily be extended for Enhancement Requests as well as Bug Reporting. Exploratory Testing Exploratory testing comes in when you aren’t sure how the system will behave in a new scenario.  The scenario wasn’t planned for in the initial system requirements and there isn’t an existing test for it.  By definition the system behaviour is “undefined”. So write a new unit test to define that behaviour.  Add assertions to the tests to confirm your assumptions.  The new test becomes part of the living system specification that is kept up to date with the test suite. Examples This workflow is especially good when developing APIs.  When you are finally done your production API then comes the job of writing documentation on how to consume the API.  Good documentation will also include code examples.  Don’t let these code examples merely exist in some accompanying manual; implement them in a test suite. Example tests and documentation do not have to be created after the production API is complete.  It is best to write the example code (tests) as you go just before the production code. Smoke Tests Every system has a typical use case.  This represents the basic, core functionality of the system.  If this fails after an upgrade the end users will be hosed and they will be scratching their heads as to how it could be possible that an update got released with this core functionality broken. The tests for this core functionality are referred to as “smoke tests”.  It is a good idea to have them automated and run with each build in order to avoid extreme embarrassment and angry customers. Coverage Analysis Code coverage analysis is a tool that reports how much of the production code base is exercised by the test suite.  In Visual Studio this can be found under the Test main menu item. The tool will report a total number for the code coverage, which can be anywhere between 0 and 100%.  Coverage Analysis shouldn’t be used strictly for numbers reporting.  Companies shouldn’t set minimum coverage targets that mandate that all projects must have at least 80% or 100% test coverage.  These arbitrary requirements just invite gaming of the coverage analysis, which makes the numbers useless. The analysis tool will break down the coverage by the various classes and methods in projects.  Instead of focusing on the total number, drill down into this view and see which classes have high or low coverage.  It you are surprised by a low number on a class this is an opportunity to add tests. When drilling through the classes there will be generally two types of reaction to a surprising low test coverage number.  The first reaction type is a recognition that there is low hanging fruit to be picked.  There may be some classes or methods that aren’t being tested, which could easy be.  The other reaction type is “OMG”.  This were you find a critical piece of code that isn’t under test.  In both cases, go and add the missing tests. Test Refactoring The general theme of this post up to this point has been how to add more and more tests to a test suite.  I’ll step back from that a bit and remind that every line of code is a liability.  Each line of code has to be read and maintained, which costs money.  This is true regardless whether the code is production code or test code. Remember that the primary goal of the test suite is that it be easy to read so that people can easily determine the specifications of the system.  Make sure that adding more and more tests doesn’t interfere with this primary goal. Perform code reviews on the test suite as often as on production code.  Hold the test code up to the same high readability standards as the production code.  If the tests are hard to read then change them.  Look to remove duplication.  Duplicate setup code between two or more test methods that can be moved to a shared function.  Entire test methods can be removed if it is found that the scenario it tests is covered by other tests.  Its OK to delete a test that isn’t pulling its own weight anymore. Remember to only start refactoring when all the test are green.  Don’t refactor the tests and the production code at the same time.  An automated test suite can be thought of as a double entry book keeping system.  The unchanging, passing production code serves as the tests for the test suite while refactoring the tests. As with all refactoring, it is best to fit this into your regular work rather than asking for time later to get it done.  Fit this into the standard red-green-refactor cycle.  The refactor step no only applies to production code but also the tests, but not at the same time.  Perhaps the cycle should be called red-green-refactor production-refactor tests (not quite as catchy).   That about covers most of the test-after workflows I can think of.  In my next post I’ll get into test-first workflows.

  Read the article

• Windows Phone Developer Spotlight: Nikolai Joukov

  - by Lori Lalonde

  Originally posted on: http://geekswithblogs.net/lorilalonde/archive/2014/06/04/windows-phone-developer-spotlight-nikolai-joukov.aspxAs part of an ongoing series, I plan to include a spotlight post on people within the community that are stars in their field and area of expertise. For my first spotlight post, I interviewed Nikolai Joukov, who is a regular attendee at my local area .NET User Group (CTTDNUG), and has also participated in many of the Mobile and Cloud workshops we have hosted over the past few years. Nikolai stood out immediately, because of his passion for developing mobile apps, his interest in continuous learning, and his drive to publish quality apps that people will find useful and entertaining. Background: Nikolai immigrated to Canada in 1995, and has been working in IT since 1997. He moved on to become an independent contractor in 2005, and has worked at various large scale organizations over the course of his career, including BMO, Enbridge, Economical Insurance, Equitable Life, Manulife and Sun Life. Nikolai is an accomplished Windows Phone and Windows Store publisher, with 11 published Windows Phone apps, and 8 published Windows Store apps. He has almost 6000 downloads and favourable reviews. Q & A with Nikolai How many years have you been developing Windows Phone apps? 2 years When did you develop your very first Windows Phone app, and what was it about? Actually, the very first app I wrote was for the Microsoft “Smart Phone” back in 2004. This phone was given to me by Microsoft during the Developers Days Conference in Toronto. It was some kind of experimental model named Smart Phone, but you had to use VB 3 to develop the applications. Needless to say, this was not very successful at that time. My app was a Stock Trades Calculator. Very primitive, but it was working for me. The phone was heavy and the battery barely lasted 4 hours. Microsoft stopped supporting it few months later and the phone stopped working shortly after, but I still have it as a souvenir. For Windows Phone, my first app was “Trip Packing Assistant”. This is a simple trip packing check list that allows you to list items by category, set required quantity of items, and mark off the item in the list when it is packed. I designed it for me and my wife Galina, since we love to travel and this program helps manage our list for us. How did you get started in Windows Phone development? I have to say thanks to our .NET User Group for introducing me to Windows Phone development. I was intrigued and decided to give it a try. In October 2012 during a 2 day training event that ObjectSharp hosted in London, I met Bruce Johnson. On his advice, I registered for Developer Movement, and it is was a good push to actually complete the apps that I started. You have a great series of travel guide apps both for Windows Phone and Windows Store. Tell us about how you came up with the idea to develop those apps and what process you went through to put it all together. Like I said earlier, my wife and I love to travel. Before I created Trip Packing Assistant, every time we were planning to travel somewhere new, Galina would spend 3-4 weeks doing research. She would create a Word document with all of the information. We didn’t want to have to carry our laptop with us all the time, so we printed out the Word document she created, and would take it with us. After we returned from the trip, we would bring back tons of pictures and materials. Then our friends started to ask us about our materials before they planned their trips to the same places we had visited. So I decided to give it a try and started making apps for Windows Phone and for Windows 8. I hope these applications will help people who are planning to travel. So, all of the pictures used in the travel apps you created were actually taken by you during these amazing trips? Yes Do you have another Windows Store/Windows Phone project in development right now? If so, can you give us a hint at what it will be about? I want to stay with travel apps for now. But this time I will try to write an app for us (Galina and I). Usually we go on the trip, then I write the apps after we have all this beautiful pictures in our hands. We are planning a trip to Rome. This app will not have the pictures, but I want to add a map with points of interest and all information that can be useful for us. Then we will go on our trip and test it on location. As well I am planning to work on my existing apps to make them better. What learning resources would you recommend for other developers that want to get started in Window Store and Windows Phone development? I would start with dev.windowsphone.com to get all tools and samples, also links to training materials. I like MVA (Microsoft Virtual Academy). Their videos are really useful and it is free. Pluralsight is good too but it is not free and I do not have a subscription anymore. Our .NET User Group meetings give good insights too. I went to all meetings and full day training events. When you start to develop your app, you need to do research for specific questions that arise during development. The Developer Portal and Nokia Developer are good resources too. Wrap Up Thanks Nikolai for participating in my first Spotlight blog post! Shown below is Nikolai’s publisher page in the Windows Phone Store and his publisher page in the Windows Store. Simply click on it to be taken to there to check out his portfolio of apps. Be sure to download his apps and try them out! They are all free! Nikolai’s Windows Phone apps   Nikolai’s Windows Store Apps

  Read the article

• Are IE 9 will have a place in heart of user ?

  - by anirudha

  in a advertisement of IE 9 MSFT compare two product first is their IE9 and second is chrome 6. I know 6 is not currently [9] but no objection because may be they make ads when 6 is currently version and have RC or beta in their hands. on IE 9 test-drive website they show many of people ads to show the user that IE9 is performance better or other chrome or Firefox not. well they not compare with Firefox because last days firefox not still in news and search trends like before RC release many of user googling for them. Well I myself found IE9 perform smoother then chrome. but what MSFT do after IE9 nothing they waiting for IE 10 not for give updates not as well as Google chrome and Firefox. Are IE9 have anything new for Developer even a small or big. well they tell you blah or useless things everytime when they make for next version no matter for you but a matter for them because they add a new thing even useless for developer. I am not have any feeling with IE bad but I like to make reviews as well as I can make. I show you something who I experience with IE and someother browser like Chrome and Firefox. IE 9 still have no plugin as well as other provided like Firefox have Firebug a great utilities who is best option for developer to debug their code. IE9 developer tool is good but still you never customize them or readymade customization available to work as in firefox many of person make customization for firebug like example :- firepicker for picking color in firebug , firebug autocomplete for intellisense like feature when you write JavaScript inside console panel , pixelperfect , firequery , sitepoint reference and many other great example we all love to use. as other things that Firefox give many things customizable like themes , ui and many thing customization means more thing user or developer want to make themselves and more contribution make them better software so Firefox is great because customization is a great thing inside firefox and chrome. if you read some post of developer on MSDN to what’s new in IE 9 developer tool that you feel they are joking whenever you see some other things of Firefox and chrome. in a Firefox a plugin perform many much things but in IE still use IE 9 developer tool no other option like in Firefox use Firebug and many other utilities to make development easier and time saving and best as we can do.if you see Firefox page on mozilla that sublines of firefox is high performance easy customization advanced security well you can say what’s performance but there is no comparison with IE because IE have only performance and nothing else. but Firefox have these three thing to make product love. and third thing I really love that security yeah security. from long time before whenever IE6 is no hackproff and many other easily hack IE6 whenever Firefox is secure. I found myself that many of website install a software on client’s computer and they still not know about them so they track everything. sometime they hijack the homepage and make their website as their homepage. sometime they do something and you trying  to go to  any website then they go to their site first. the problem I telling about not long before it’s time of late in 2008 whenever Firefox is much better then IE6. if someone have bad experience with anyone of these software share with us I like to hear your voice. whenever IE still not for use Firefox is a good option for us even user or developer. I not know why someone make next version of IE. IE still have time to go away from Web. Firefox not rude as IE they still believe in user feedback and chrome is also open the door for feedback on their product gooogle Chrome. but what thing they made in IE on user feedback nothing. they still thing to teach what they maked not thing about what user need. if you spent some hour on firefox and chrome then you found what’s matter. what thing you have whenever you use IE or other browser like google chrome and Firefox :- as a user IE give you nothing even tell you blah blah and more blah but still next version of IE means next IE6 for the web. as in Google chrome you find plugins addons or customization to make experience better but in IE9 you can’t customize anything even the themes they have by default. Firefox already have a great list of plugins or addons to make experience better with Web but IE9 have nothing. this means IE9 not for user and other like chrome and firefox give you much better experience then IE. next thing after user is developer. first thing is that all developer want smooth development who save their time not take too perhaps saving.posts on IE9 show that a list of thing improved in IE 9 developer tool but are one developer tool enough for web development so developer need more utilities to solve different different type of puzzle who IE 9 never give like in Firefox you have utilities to do a task even small or big one. in chrome same experience you have but IE9 never give any plugin or utilities to make our work faster even they are new headache for developer because IE not give update as soon as other because in Firefox and in chrome if a bug is reported then they solve them fast and distribute them in next version of software very soon but in IE wait for a long time like IE 9 and IE 8 have no official release between them as update. As my conclusion there is no reason to use IE and adopt 9 again. it’s really not for Developer or user even newbie or smart people. as a rule I want to beware you with IE because it’s my responsibilities to move the thing in good way as I can make. well are you sure that there is no reason or profit they thing to have with IE9  if not why they forget luna [windows xp] user. because they are old nothing they want to force user to give them some money by purchasing a new version of OS. so this a thing why they marketed their software. if you thing about what firefox and chrome want to make : Mozilla's mission is to promote openness, innovation and opportunity on the web. chrome mission we all see whenever we use them. but IE9 is a trick they promote because they want to add something to next version of windows. if somebody like IE9 [even surprised by ads they see or post they read] then they purchase windows soon as they possible. Well you feel that I am opposition of IE9 and favor of chrome and Firefox yeah you feel right I hate IE from a heart not from a pencil. well you get same thing when you have trying three product major I described here Chrome firefox and IE. well don’t believe on the blogs , posts or article who are provided by the merchant or vender’s website. open the eyes read and thing what they talk and feel are they really true. if you confused that compare with some other. now you know the true because no one telling so badly as a user can described who use them not only one who make their feature. always open the eyes don’t believe use your mind and find the truth. thanks for reading my post good bye and take care

  Read the article

• Create and Backup Multiple Profiles in Google Chrome

  - by Asian Angel

  Other browsers such as Firefox and SeaMonkey allow you to have multiple profiles but not Chrome…at least not until now. If you want to use multiple profiles and create backups for them then join us as we look at Google Chrome Backup. Note: There is a paid version of this program available but we used the free version for our article. Google Chrome Backup in Action During the installation process you will run across this particular window. It will have a default user name filled in as shown here…you will not need to do anything except click on Next to continue installing the program. When you start the program for the first time this is what you will see. Your default Chrome Profile will already be visible in the window. A quick look at the Profile Menu… In the Tools Menu you can go ahead and disable the Start program at Windows Startup setting…the only time that you will need the program running is if you are creating or restoring a profile. When you create a new profile the process will start with this window. You can access an Advanced Options mode if desired but most likely you will not need it. Here is a look at the Advanced Options mode. It is mainly focused on adding Switches to the new Chrome Shortcut. The drop-down menu for the Switches available… To create your new profile you will need to choose: A profile location A profile name (as you type/create the profile name it will automatically be added to the Profile Path) Make certain that the Create a new shortcut to access new profile option is checked For our example we decided to try out the Disable plugins switch option… Click OK to create the new profile. Once you have created your new profile, you will find a new shortcut on the Desktop. Notice that the shortcut’s name will be Google Chrome + profile name that you chose. Note: On our system we were able to move the new shortcut to the “Start Menu” without problems. Clicking on our new profile’s shortcut opened up a fresh and clean looking instance of Chrome. Just out of curiosity we did decide to check the shortcut to see if the Switch set up correctly. Unfortunately it did not in this instance…so your mileage with the Switches may vary. This was just a minor quirk and nothing to get excited or upset over…especially considering that you can create multiple profiles so easily. After opening up our default profile of Chrome you can see the individual profile icons (New & Default in order) sitting in the Taskbar side-by-side. And our two profiles open at the same time on our Desktop… Backing Profiles Up For the next part of our tests we decided to create a backup for each of our profiles. Starting the wizard will allow you to choose between creating or restoring a profile. Note: To create or restore a backup click on Run Wizard. When you reach the second part of the process you can go with the Backup default profile option or choose a particular one from a drop-down list using the Select a profile to backup option. We chose to backup the Default Profile first… In the third part of the process you will need to select a location to save the profile to. Once you have selected the location you will see the Target Path as shown here. You can choose your own name for the backup file…we decided to go with the default name instead since it contained the backup’s calendar date. A very nice feature is the ability to have the cache cleared before creating the backup. We clicked on Yes…choose the option that best suits your needs. Once you have chosen either Yes or No the backup will then be created. Click Finish to complete the process. The backup file for our Default Profile at 14.0 MB in size. And the backup file for our Chrome Fresh Profile…2.81 MB. Restoring Profiles For the final part of our tests we decided to do a Restore. Select Restore and click Next to get the process started. In the second step you will need to browse for the Profile Backup File (and select the desired profile if you have created multiples). For our example we decided to overwrite the original Default Profile with the Chrome Fresh Profile. The third step lets you choose where to restore the chosen profile to…you can go with the Default Profile or choose one from the drop-down list using the Restore to a selected profile option. The final step will get you on your way to restoring the chosen profile. The program will conduct a check regarding the previous/old profile and ask if you would like to proceed with overwriting it. Definitely nice in case you change your mind at the last moment. Clicking Yes will finish the restoration. The only other odd quirk that we noticed while using the program was that the Next Button did not function after restoring the profile. You can easily get around the problem by clicking to close the window. Which one is which? After the restore process we had identical twins. Conclusion If you have been looking for a way to create multiple profiles in Google Chrome, then you might want to add this program to your system. Links Download Google Chrome Backup Similar Articles Productive Geek Tips Backup and Restore Firefox Profiles EasilyBackup Different Browsers Easily with FavBackupBackup Your Browser with the New FavBackupStupid Geek Tricks: Compare Your Browser’s Memory Usage with Google ChromeHow to Make Google Chrome Your Default Browser TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals

  Read the article

• what is the best mid/high-end class audio/music creation audio sound card?

  - by Chris

  Hello, I have a computershop myself, and I repair computers. But one of the things I really don't know (yet) is the performace od audio cards for music creation with midi. I have searched and searched and came up with some good reviews, but after browsing for a couple of hours I could't see the trees trough the forrest :-D (it's a dutch expression) At one moment I thought the M-Audio - Delta 1010LT would be a good PCIe card, later on I read that this card was released years ago. (but that could be false information) Also any personal expierence would be great, but not necessairy. I have searched a few cards, and I hope someone can help me make a choice for a friend of mine. He's buget is between $100 and $350 I know there are audio cards from $ 500 - $1850,- this is just too expensive. The following specs are crucial: ASIO Midi Mic in minimal 5.1, 7.1 recommended it's not for airplay, but just to compose music at home. using Ableton and midi keyboard. 1. M-Audio - Delta 1010LT: 8 x 8 analog I/O 2 mic preamps or line inputs S/PDIF digital I/O (coaxial) with 2-channel PCM SCMS copy protection control digital I/O supports surround-encoded AC-3 and DTS pass-through 1 x 1 MIDI I/O directly drive up to 7.1 surround (bass management software included) software controlled 36-bit internal DSP digital mixing/routing +4dbu/-10dBV operation individually switched in software word clock I/O for sample accurate device synchronization 2. RME HDSP 9632: * Stereo Analog Ein- und Ausgang, symmetrisch*, 24-Bit/192kHz, > 110 dB SNR * Optionale Erweiterungsboards mit je 4 symmetrischen Ein- und Ausgängen * Alle analogen I/Os voll 192 kHz-fähig, also keine Reduzierung der Kanalzahl * 1 x ADAT Digital In/Out, 96 kHz-fähig (S/MUX) * 1 x SPDIF Digital In/Out, 192 kHz-fähig * 1 x Breakout Kabel für koaxialen SPDIF-Betrieb* * Also bis zu 16 Ein-und Ausgänge gleichzeitig nutzbar! * 1 x Stereo Kopfhörerausgang, parallel zum analogen Ausgang, aber eigene Pegelanpassung * 1 x MIDI I/O für 16 Kanäle Hi-Speed MIDI über Breakout Kabel * DIGICheck, RMEs einzigartiges Meter- und Analysetool mit Spectral Analyser, Professionelle Level Meter 2/8/16-Kanalig, Vector Audio Scope und diversen weiteren Analysefunktionen * HDSP Meter Bridge: Frei skalierbare Levelmeter mit Peak- und RMS Berechnung in Hardware * TotalMix: 512-Kanal Mischer mit 40 Bit interner Auflösung 3. EMU 1212M (1212 M) PCIe: * Top kwaliteit convertors 24-bit/192kHz convertors. * Hardware gestuurde effecten. * DSP zero-latency hardware mixen en monitoring. * Analoge en digitale I/O plus MIDI. * EMU Production Tools Software Bundle - Cakewalk SONAR , Steinberg Cubase LE, Ableton Live E-MU Edition **EMU 1212M PCI-e inputs/outputs:** * 2 balanced jack inputs. * 2 balanced jack outputs. * 24-bit/192kHz ADAT I/O. * 24-bit/192kHz Coaxiale S/PDif I/O switchable to AES/EBU. * MIDI I/O. 4. M-Audio Audiophile 192: - Up to 24-bit/192kHz audio - 2 balanced analog inputs (1/4” TRS) - 2 balanced analog outputs (1/4” TRS) - S/PDIF digital I/O (coaxial RCA connectors) with 2-channel PCM - SCMS copy protection control - Digital I/O supports surround-encoded AC-3 and DTS pass-through - Direct hardware input monitoring via separate balanced 1/4” TRS monitor outputs - Software routing of inputs and outputs - Digital I/O can be routed to/from external effects - 16-channel MIDI I/O - ASIO, WDM, GSIF 2 and Core Audio driver support for compatibility with most applications - 64-bit driver support for Windows - PCI 2.2 compatibility - Apple G5 compatible - Incompatible exceptions - Includes Ableton Live Lite music production software, so you can make music right away - Works with other Delta cards Technical Specifcations: - Compatibility - ASIO - WDM - GSIF 2 - Core Audio

  Read the article

• CodePlex Daily Summary for Saturday, June 16, 2012

  CodePlex Daily Summary for Saturday, June 16, 2012Popular ReleasesCosmos (C# Open Source Managed Operating System): Release 92560: Prerequisites Visual Studio 2010 - Any version including Express. Express users must also install Visual Studio 2010 Integrated Shell runtime VMWare - Cosmos can run on real hardware as well as other virtualization environments but our default debug setup is configured for VMWare. VMWare Player (Free). or Workstation VMWare VIX API 1.11AutoUpdaterdotNET : Autoupdate for VB.NET and C# Developer: AutoUpdater.NET 1.1: Release Notes *New feature added that allows user to select remind later interval.Sumzlib: API document: API documentMicrosoft SQL Server Product Samples: Database: AdventureWorks 2008 OLTP Script: Install AdventureWorks2008 OLTP database from script The AdventureWorks database can be created by running the instawdb.sql DDL script contained in the AdventureWorks 2008 OLTP Script.zip file. The instawdb.sql script depends on two path environment variables: SqlSamplesDatabasePath and SqlSamplesSourceDataPath. The SqlSamplesDatabasePath environment variable is set to the default Microsoft ® SQL Server 2008 path. You will need to change the SqlSamplesSourceDataPath environment variable to th...HigLabo: HigLabo_20120613: Bug fix HigLabo.Mail Decode header encoded by CP1252Jasc (just another script compressor): 1.3.1: Updated Ajax Minifier to 4.55.WipeTouch, a jQuery touch plugin: 1.2.0: Changes since 1.1.0: New: wipeMove event, triggered while moving the mouse/finger. New: added "source" to the result object. Bug fix: sometimes vertical wipe events would not trigger correctly. Bug fix: improved tapToClick handler. General code refactoring. Windows Phone 7 is not supported, yet! Its behaviour is completely broken and would require some special tricks to make it work. Maybe in the future...Phalanger - The PHP Language Compiler for the .NET Framework: 3.0.0.3026 (June 2012): Fixes: round( 0.0 ) local TimeZone name TimeZone search compiling multi-script-assemblies PhpString serialization DocDocument::loadHTMLFile() token_get_all() parse_url()BlackJumboDog: Ver5.6.4: 2012.06.13 Ver5.6.4 　(1) Web???????、???POST??????????????????Yahoo! UI Library: YUI Compressor for .Net: Version 2.0.0.0 - Ferret: - Merging both 3.5 and 2.0 codebases to a single .NET 2.0 assembly. - MSBuild Task. - NAnt Task.Bumblebee: Version 0.3.1: Changed default config values to decent ones. Restricted visibility of Hive.fs to internal. Added some XML documentation. Added Array.shuffle utility. The dll is also available on NuGet My apologies, the initial source code referenced was missing one file which prevented it from building The source code contains two examples, one in C#, one in F#, illustrating the usage of the framework on the Travelling Salesman Problem: Source CodeSharePoint XSL Templates: SPXSLT 0.0.9: Added new template FixAmpersands. Fixed the contents of the MultiSelectValueCheck.xsl file, which was missing the stylesheet wrapper.ExcelFileEditor: .CS File: nothingBizTalk Scheduled Task Adapter: Release 4.0: Works with BizTalk Server 2010. Compiled in .NET Framework 4.0. In this new version are available small improvements compared to the current version (3.0). We can highlight the following improvements or changes: 24 hours support in “start time” property. Previous versions had an issue with setting the start time, as it shown 12 hours watch but no AM/PM. Daily scheduler review. Solved a small bug on Daily Properties: unable to switch between “Every day” and “on these days” Installation e...Weapsy - ASP.NET MVC CMS: 1.0.0 RC: - Upgrade to Entity Framework 4.3.1 - Added AutoMapper custom version (by nopCommerce Team) - Added missed model properties and localization resources of Plugin Definitions - Minor changes - Fixed some bugsXenta Framework - extensible enterprise n-tier application framework: Xenta Framework 1.8.0 Beta: Catalog and Publication reviews and ratings Store language packs in data base Improve reporting system Improve Import/Export system A lot of WebAdmin app UI improvements Initial implementation of the WebForum app DB indexes Improve and simplify architecture Less abstractions Modernize architecture Improve, simplify and unify API Simplify and improve testing A lot of new unit tests Codebase refactoring and ReSharpering Utilize Castle Windsor Utilize NHibernate ORM ...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.55: Properly handle IE extension to CSS3 grammar that allows for multiple parameters to functional pseudo-class selectors. add new switch -braces:(new|same) that affects where opening braces are placed in multi-line output. The default, "new" puts them on their own new line; "same" outputs them at the end of the previous line. add new optional values to the -inline switch: -inline:(force|noforce), which can be combined with the existing boolean value via comma-separators; value "force" (which...Microsoft Media Platform: Player Framework: MMP Player Framework 2.7 (Silverlight and WP7): Additional DownloadsSMFv2.7 Full Installer (MSI) - This will install everything you need in order to develop your own SMF player application, including the IIS Smooth Streaming Client. It only includes the assemblies. If you want the source code please follow the link above. Smooth Streaming Sample Player - This is a pre-built player that includes support for IIS Smooth Streaming. You can configure the player to playback your content by simplying editing a configuration file - no need to co...Liberty: v3.2.1.0 Release 10th June 2012: Change Log -Added -Liberty is now digitally signed! If the certificate on Liberty.exe is missing, invalid, or does not state that it was developed by "Xbox Chaos, Open Source Developer," your copy of Liberty may have been altered in some (possibly malicious) way. -Reach Mass biped max health and shield changer -Fixed -H3/ODST Fixed all of the glitches that users kept reporting (also reverted the changes made in 3.2.0.2) -Reach Made some tag names clearer and more consistent between m...Media Companion: Media Companion 3.503b: It has been a while, so it's about time we release another build! Major effort has been for fixing trailer downloads, plus a little bit of work for episode guide tag in TV show NFOs.New Projects.NinJa (dotNinja): An extensive JavaScript Framework revolving around principles found in .NET and aiming to integrate full Intellisense support. bab-rizg: solve unemployment problemBizTalk Multi-part Message Attachments Zipper Pipeline Component: This pipeline component replaces all attachments of a multi-part message, in a send pipeline, for its zipped equivalent.Boggle.Net: A basic implementation of Boggle for WPF.CFScript: CFScript is an ANT-like scripting system for Compact Framework. Tasks like copying files, setting registry values o install CAB files can be done with CFScript.Diablo3: Diablo3Dygraphs.NET: Dygraphs.NETDynamics CRM plugin for nopCommerce: This plugins is a bridge between nopCommerce and Dynamics CRM. nms.gaming: Place holderProject Bright Star: Project Bright Star. Deal with it.RDFSharp: RDFSharp is a library designed to ease the development of .NET applications based on the RDF and Semantic Web data model.SlamCMS: An application framework that allows you to build content managed sites leveraging SharePoint 2010 for publishing with tools to query and manifest your data.test02: no

  Read the article

• First PC Build (Part 1)

  - by Anthony Trudeau

  Originally posted on: http://geekswithblogs.net/tonyt/archive/2014/08/05/157959.aspxA couple of months ago I made the decision to build myself a new computer. The intended use is gaming and for using the last real version of Photoshop. I was motivated by the poor state of console gaming and a simple desire to do something I haven’t done before – build a PC from the ground up. I’ve been using PCs for more than two decades. I’ve replaced a component hear and there, but for the last 10 years or so I’ve only used laptops. Therefore, this article will be written from the perspective of someone familiar with PCs, but completely new at building. I’m not an expert and this is not a definitive guide for building a PC, but I do hope that it encourages you to try it yourself. Component List Research There was a lot of research necessary, because building a PC is completely new to me, and I haven’t kept up with what’s out there. The first thing you want to do is nail down what your goals are. Your goals are going to be driven by what you want to do with your computer and personal choice. Don’t neglect the second one, because if you’re doing this for fun you want to get what you want. In my case, I focused on three things: performance, longevity, and aesthetics. The performance aspect is important for gaming and Photoshop. This will drive what components you get. For example, heavy gaming use is going to drive your choice of graphics card. Longevity is relevant to me, because I don’t want to be changing things out anytime soon for the next hot game. The consequence of performance and longevity is cost. Finally, aesthetics was my next consideration. I could have just built a box, but it wouldn’t have been nearly as fun for me. Aesthetics might not be important to you. They are for me. I also like gadgets and that played into at least one purchase for this build. I used PC Part Picker to put together my component list. I found it invaluable during the process and I’d recommend it to everyone. One caveat is that I wouldn’t trust the compatibility aspects. It does a pretty good job of not steering you wrong, but do your own research. The rest of it isn’t really sexy. I started out with what appealed to me and then I made changes and additions as I dived deep into researching each component and interaction I could find. The resources I used are innumerable. I used reviews, product descriptions, forum posts (praises and problems), et al. to assist me. I also asked friends into gaming what they thought about my component list. And when I got near the end I posted my list to the Reddit /r/buildapc forum. I cannot stress the value of extra sets of eyeballs and first hand experiences. Some of the resources I used: PC Part Picker Tom’s Hardware bit-tech Reddit Purchase PC Part Picker favors certain vendors. You should look at others too. In my case I found their favorites to be the best. My priorities were out-the-door price and shipping time. I knew that once I started getting parts I’d want to start building. Luckily, I timed it well and everything arrived within the span of a few days. Here are my opinions on the vendors I ended up using in alphabetical order. Amazon.com is a good, reliable choice. They have excellent customer service in my experience, and I knew I wouldn’t have trouble with them. However, shipping time is often a problem when you use their free shipping unless you order expensive items (I’ve found items over $100 ship quickly). Ultimately though, price wasn’t always the best and their collection of sales tax in my state turned me off them. I did purchase my case from them. I ordered the mouse as well, but I cancelled after it was stuck four days in a “shipping soon” state. I purchased the mouse locally. Best Buy is not my favorite place to do business. There’s a lot of history with poor, uninterested sales representatives and they used to have a lot of bad anti-consumer policies. That’s a lot better now, but the bad taste is still in my mouth. I ended up purchasing the accessories from them including mouse (locally) and headphones. NCIX is a company that I’ve never heard of before. It popped up as a recommendation for my CPU cooler on PC Part Picker. I didn’t do a lot of research on the company, because their policy on you buying insurance for your orders turned me off. That policy makes it clear to me that the company finds me responsible for the shipment once it leaves their dock. That’s not right, and may run afoul of state laws. Regardless they shipped my CPU cooler quickly and I didn’t have a problem. NewEgg.com is a well known company. I had never done business with them, but I’m glad I did. They shipped quickly and provided good visibility over everything. The prices were also the best in most cases. My main complaint is that they have a lot of exchange only return policies on components. To their credit those policies are listed in the cart underneath each item. The visibility tells me that they’re not playing any shenanigans and made me comfortable dealing with that risk. The vast majority of what I ordered came from them. Coming Next In the next part I’ll tackle my build experience.

  Read the article

• Best Practices - which domain types should be used to run applications

  - by jsavit

  This post is one of a series of "best practices" notes for Oracle VM Server for SPARC (formerly named Logical Domains) One question that frequently comes up is "which types of domain should I use to run applications?" There used to be a simple answer in most cases: "only run applications in guest domains", but enhancements to T-series servers, Oracle VM Server for SPARC and the advent of SPARC SuperCluster have made this question more interesting and worth qualifying differently. This article reviews the relevant concepts and provides suggestions on where to deploy applications in a logical domains environment. Review: division of labor and types of domain Oracle VM Server for SPARC offloads many functions from the hypervisor to domains (also called virtual machines). This is a modern alternative to using a "thick" hypervisor that provides all virtualization functions, as in traditional VM designs, This permits a simpler hypervisor design, which enhances reliability, and security. It also reduces single points of failure by assigning responsibilities to multiple system components, which further improves reliability and security. In this architecture, management and I/O functionality are provided within domains. Oracle VM Server for SPARC does this by defining the following types of domain, each with their own roles: Control domain - management control point for the server, used to configure domains and manage resources. It is the first domain to boot on a power-up, is an I/O domain, and is usually a service domain as well. I/O domain - has been assigned physical I/O devices: a PCIe root complex, a PCI device, or a SR-IOV (single-root I/O Virtualization) function. It has native performance and functionality for the devices it owns, unmediated by any virtualization layer. Service domain - provides virtual network and disk devices to guest domains. Guest domain - a domain whose devices are all virtual rather than physical: virtual network and disk devices provided by one or more service domains. In common practice, this is where applications are run. Typical deployment A service domain is generally also an I/O domain: otherwise it wouldn't have access to physical device "backends" to offer to its clients. Similarly, an I/O domain is also typically a service domain in order to leverage the available PCI busses. Control domains must be I/O domains, because they boot up first on the server and require physical I/O. It's typical for the control domain to also be a service domain too so it doesn't "waste" the I/O resources it uses. A simple configuration consists of a control domain, which is also the one I/O and service domain, and some number of guest domains using virtual I/O. In production, customers typically use multiple domains with I/O and service roles to eliminate single points of failure: guest domains have virtual disk and virtual devices provisioned from more than one service domain, so failure of a service domain or I/O path or device doesn't result in an application outage. This is also used for "rolling upgrades" in which service domains are upgraded one at a time while their guests continue to operate without disruption. (It should be noted that resiliency to I/O device failures can also be provided by the single control domain, using multi-path I/O) In this type of deployment, control, I/O, and service domains are used for virtualization infrastructure, while applications run in guest domains. Changing application deployment patterns The above model has been widely and successfully used, but more configuration options are available now. Servers got bigger than the original T2000 class machines with 2 I/O busses, so there is more I/O capacity that can be used for applications. Increased T-series server capacity made it attractive to run more vertical applications, such as databases, with higher resource requirements than the "light" applications originally seen. This made it attractive to run applications in I/O domains so they could get bare-metal native I/O performance. This is leveraged by the SPARC SuperCluster engineered system, announced a year ago at Oracle OpenWorld. In SPARC SuperCluster, I/O domains are used for high performance applications, with native I/O performance for disk and network and optimized access to the Infiniband fabric. Another technical enhancement is the introduction of Direct I/O (DIO) and Single Root I/O Virtualization (SR-IOV), which make it possible to give domains direct connections and native I/O performance for selected I/O devices. A domain with either a DIO or SR-IOV device is an I/O domain. In summary: not all I/O domains own PCI complexes, and there are increasingly more I/O domains that are not service domains. They use their I/O connectivity for performance for their own applications. However, there are some limitations and considerations: at this time, a domain using physical I/O cannot be live-migrated to another server. There is also a need to plan for security and introducing unneeded dependencies: if an I/O domain is also a service domain providing virtual I/O go guests, it has the ability to affect the correct operation of its client guest domains. This is even more relevant for the control domain. where the ldm has to be protected from unauthorized (or even mistaken) use that would affect other domains. As a general rule, running applications in the service domain or the control domain should be avoided. To recap: Guest domains with virtual I/O still provide the greatest operational flexibility, including features like live migration. I/O domains can be used for applications with high performance requirements. This is used to great effect in SPARC SuperCluster and in general T4 deployments. Direct I/O (DIO) and Single Root I/O Virtualization (SR-IOV) make this more attractive by giving direct I/O access to more domains. Service domains should in general not be used for applications, because compromised security in the domain, or an outage, can affect other domains that depend on it. This concern can be mitigated by providing guests' their virtual I/O from more than one service domain, so an interruption of service in the service domain does not cause an application outage. The control domain should in general not be used to run applications, for the same reason. SPARC SuperCluster use the control domain for applications, but it is an exception: it's not a general purpose environment; it's an engineered system with specifically configured applications and optimization for optimal performance. These are recommended "best practices" based on conversations with a number of Oracle architects. Keep in mind that "one size does not fit all", so you should evaluate these practices in the context of your own requirements. Summary Higher capacity T-series servers have made it more attractive to use them for applications with high resource requirements. New deployment models permit native I/O performance for demanding applications by running them in I/O domains with direct access to their devices. This is leveraged in SPARC SuperCluster, and can be leveraged in T-series servers to provision high-performance applications running in domains. Carefully planned, this can be used to provide higher performance for critical applications.

  Read the article

• Benefits of Behavior Driven Development

  - by Aligned

  Originally posted on: http://geekswithblogs.net/Aligned/archive/2013/07/26/benefits-of-behavior-driven-development.aspxContinuing my previous article on BDD, I wanted to point out some benefits of BDD and since BDD is an extension of Test Driven Development (TDD), you get those as well. I’ll add another article on some possible downsides of this approach. There are many articles about the benefits of TDD and they apply to BDD. I’ve pointed out some here and copied some of the main points for each article, but there are many more including the book The Art of Unit Testing by Roy Osherove. http://geekswithblogs.net/leesblog/archive/2008/04/30/the-benefits-of-test-driven-development.aspx (Lee Brandt) Stability Accountability Design Ability Separated Concerns Progress Indicator http://tddftw.com/benefits-of-tdd/ Help maintainers understand the intention behind the code Bring validation and proper data handling concerns to the forefront. Writing the tests first is fun. Better APIs come from writing testable code. TDD will make you a better developer. http://www.slideshare.net/dhelper/benefit-from-unit-testing-in-the-real-world (from Typemock). Take a look at the slides, especially the extra time required for TDD (slide 10) and the next one of the bugs avoided using TDD (slide 11). Less bugs (slide 11) about testing and development (13) Increase confidence in code (14) Fearlessly change your code (14) Document Requirements (14) also see http://visualstudiomagazine.com/articles/2013/06/01/roc-rocks.aspx Discover usability issues early (14) All these points and articles are great and there are many more. The following are my additions to the benefits of BDD from using it in real projects for my company. July 2013 on MSDN - Behavior-Driven Design with SpecFlow Scott Allen did a very informative TDD and MVC module, but to me he is doing BDDCompile and Execute Requirements in Microsoft .NET ~ Video from TechEd 2012 Communication I was working through a complicated task that the decision tree kept growing. After writing out the Given, When, Then of the scenario, I was able tell QA what I had worked through for their initial test cases. They were able to add from there. It is also useful to use this language with other developers, managers, or clients to help make informed decisions on if it meets the requirements or if it can simplified to save time (money). Thinking through solutions, before starting to code This was the biggest benefit to me. I like to jump into coding to figure out the problem. Many times I don't understand my path well enough and have to do some parts over. A past supervisor told me several times during reviews that I need to get better at seeing "the forest for the trees". When I sit down and write out the behavior that I need to implement, I force myself to think things out further and catch scenarios before they get to QA. A co-worker that is new to BDD and we’ve been using it in our new project for the last 6 months, said “It really clarifies things”. It took him awhile to understand it all, but now he’s seeing the value of this approach (yes there are some downsides, but that is a different issue). Developers’ Confidence This is huge for me. With tests in place, my confidence grows that I won’t break code that I’m not directly changing. In the past, I’ve worked on projects with out tests and we would frequently find regression bugs (or worse the users would find them). That isn’t fun. We don’t catch all problems with the tests, but when QA catches one, I can write a test to make sure it doesn’t happen again. It’s also good for Releasing code, telling your manager that it’s good to go. As time goes on and the code gets older, how confident are you that checking in code won’t break something somewhere else? Merging code - pre release confidence If you’re merging code a lot, it’s nice to have the tests to help ensure you didn’t merge incorrectly. Interrupted work I had a task that I started and planned out, then was interrupted for a month because of different priorities. When I started it up again, and un-shelved my changes, I had the BDD specs and it helped me remember what I had figured out and what was left to do. It would have much more difficult without the specs and tests. Testing and verifying complicated scenarios Sometimes in the UI there are scenarios that get tricky, because there are a lot of steps involved (click here to open the dialog, enter the information, make sure it’s valid, when I click cancel it should do {x}, when I click ok it should close and do {y}, then do this, etc….). With BDD I can avoid some of the mouse clicking define the scenarios and have them re-run quickly, without using a mouse. UI testing is still needed, but this helps a bunch. The same can be true for tricky server logic. Documentation of Assumptions and Specifications The BDD spec tests (Jasmine or SpecFlow or other tool) also work as documentation and show what the original developer was trying to accomplish. It’s not a different Word document, so developers will keep this up to date, instead of letting it become obsolete. What happens if you leave the project (consulting, new job, etc) with no specs or at the least good comments in the code? Sometimes I think of a new scenario, so I add a failing spec and continue in the same stream of thought (don’t forget it because it was on a piece of paper or in a notepad). Then later I can come back and handle it and have it documented. Jasmine tests and JavaScript –> help deal with the non-typed system I like JavaScript, but I also dislike working with JavaScript. I miss C# telling me if a property doesn’t actually exist at build time. I like the idea of TypeScript and hope to use it more in the future. I also use KnockoutJs, which has observables that need to be called with ending (), since the observable is a function. It’s hard to remember when to use () or not and the Jasmine specs/tests help ensure the correct usage.   This should give you an idea of the benefits that I see in using the BDD approach. I’m sure there are more. It talks a lot of practice, investment and experimentation to figure out how to approach this and to get comfortable with it. I agree with Scott Allen in the video I linked above “Remember that TDD can take some practice. So if you're not doing test-driven design right now? You can start and practice and get better. And you'll reach a point where you'll never want to get back.”

  Read the article

• SOA Implementation Challenges

  Why do companies think that if they put up a web service that they are doing Service-Oriented Architecture (SOA)? Unfortunately, the IT and business world love to run on the latest hype or buzz words of which very few even understand the meaning. One of the largest issues companies have today as they consider going down the path of SOA, is the lack of knowledge regarding the architectural style and the over usage of the term SOA. So how do we solve this issue?I am sure most of you are thinking by now that you know what SOA is because you developed a few web services.  Isn’t that SOA, right? No, that is not SOA, but instead Just Another Web Service (JAWS). For us to better understand what SOA is let’s look at a few definitions.Douglas K. Bary defines service-oriented architecture as a collection of services. These services are enabled to communicate with each other in order to pass data or coordinating some activity with other services.If you look at this definition closely you will notice that Bary states that services communicate with each other. Let us compare this statement with my first statement regarding companies that claim to be doing SOA when they have just a collection of web services. In order for these web services to for an SOA application they need to be interdependent on one another forming some sort of architectural hierarchy. Just because a company has a few web services does not mean that they are all interconnected.SearchSOA from TechTarget.com states that SOA defines how two computing entities work collectively to enable one entity to perform a unit of work on behalf of another. Once again, just because a company has a few web services does not guarantee that they are even working together let alone if they are performing work for each other.SearchSOA also points out service interactions should be self-contained and loosely-coupled so that all interactions operate independent of each other.Of all the definitions regarding SOA Thomas Erl’s seems to shed the most light on this concept. He states that “SOA establishes an architectural model that aims to enhance the efficiency, agility, and productivity of an enterprise by positioning services as the primary means through which solution logic is represented in support of the realization of the strategic goals associated with service-oriented computing.” (Erl, 2011) Once again this definition proves that a collection of web services does not mean that a company is doing SOA. However, it does mean that a company has a collection of web services, and that is it.In order for a company to start to go down the path of SOA, they must take  a hard look at their existing business process while abstracting away any technology so that they can define what is they really want to accomplish. Once a company has done this, they can begin to factor out common sub business process like credit card process, user authentication or system notifications in to small components that can be built independent of each other and then reassembled to form new and dynamic services that are loosely coupled and agile in that they can change as a business grows.Another key pitfall of companies doing SOA is the fact that they let vendors drive their architecture. Why do companies do this? Vendors’ do not hold your company’s success as their top priority; in fact they hold their own success as their top priority by selling you as much stuff as you are willing to buy. In my experience companies tend to strive for the maximum amount of benefits with a minimal amount of cost. Does anyone else see any conflicts between this and the driving force behind vendors.Mike Kavis recommends in an article written in CIO.com that companies need to figure out what they need before they talk to a vendor or at least have some idea of what they need. It is important to thoroughly evaluate each vendor and watch them perform a live demo of their system so that you as the company fully understand what kind of product or service the vendor is actually offering. In addition, do research on each vendor that you are considering, check out blog posts, online reviews, and any information you can find on the vendor through various search engines.Finally he recommends companies to verify any recommendations supplied by a vendor. From personal experience this is very important. I can remember when the company I worked for purchased a $200,000 add-on to their phone system that never actually worked as it was intended. In fact, just after my departure from the company started the process of attempting to get their money back from the vendor. This potentially could have been avoided if the company had done the research before selecting this vendor to ensure that their product and vendor would live up to their claims. I know that some SOA vendor offer free training regarding SOA because they know that there are a lot of misconceptions about the topic. Superficially this is a great thing for companies to take part in especially if the company is starting to implement SOA architecture and are still unsure about some topics or are looking for some guidance regarding the topic. However beware that some companies will focus on their product line only regarding the training. As an example, InfoWorld.com claims that companies providing deep seminars disguised as training, focusing more about ESBs and SOA governance technology, and less on how to approach and solve the architectural issues of the attendees.In short, it is important to remember that we as software professionals are responsible for guiding a business’s technology sections should be well informed and fully understand any new concepts that may be considered for implementation. As I have demonstrated already a company that has a few web services does not mean that they are doing SOA.  Additionally, we must not let the new buzz word of the day drive our technology, but instead our technology decisions should be driven from research and proven experience. Finally, it is important to rely on vendors when necessary, however, always take what they say with a grain of salt while cross checking any claims that they may make because we have to live with the aftermath of a system after the vendors are gone.   References: Barry, D. K. (2011). Service-oriented architecture (SOA) definition. Retrieved 12 12, 2011, from Service-Architecture.com: http://www.service-architecture.com/web-services/articles/service-oriented_architecture_soa_definition.html Connell, B. (2003, 9). service-oriented architecture (SOA). Retrieved 12 12, 2011, from SearchSOA: http://searchsoa.techtarget.com/definition/service-oriented-architecture Erl, T. (2011, 12 12). Service-Oriented Architecture. Retrieved 12 12, 2011, from WhatIsSOA: http://www.whatissoa.com/p10.php InfoWorld. (2008, 6 1). Should you get your SOA knowledge from SOA vendors? . Retrieved 12 12, 2011, from InfoWorld.com: http://www.infoworld.com/d/architecture/should-you-get-your-soa-knowledge-soa-vendors-453 Kavis, M. (2008, 6 18). Top 10 Reasons Why People are Making SOA Fail. Retrieved 12 13, 2011, from CIO.com: http://www.cio.com/article/438413/Top_10_Reasons_Why_People_are_Making_SOA_Fail?page=5&taxonomyId=3016  

  Read the article

• Remotely Schedule and Stream Recorded TV in Windows 7 Media Center

  - by DigitalGeekery

  Have you ever been away from home and suddenly realized you forgot to record your favorite program? Now Windows 7 Media Center, users can schedule recordings remotely from their phones or mobile devices with Remote Potato. How it Works Remote Potato installs server software on the host computer running Windows 7 Media Center. Once the software is installed, we’ll need to do some port forwarding on the router and setup an optional dynamic DNS address. When setup is completed, we will access the application through a web based interface. Silverlight is required for Streaming recorded TV, but scheduling recordings can be done through an HTML interface. Installing Remote Potato Download and install Remote Potato on the Media Center PC. (See download link below) If you plan to stream any Recorded TV, you’ll also want to install the streaming pack located on the same page. It isn’t required to stream all shows, only shows that require the AC3 audio codec. Click Yes to allow Remote Potato to add rules to the Windows Firewall for remote access. You’ll likely need to accept a few UAC prompts. When notified that the rules were added, click OK. Remote Potato will then prompt you to allow administrator privileges to reserve a URL for it’s web server. Click Yes. Remote Potato server will start. Click on the configuration button at the right to to reveal the settings tabs.   One the General tab, you’ll have the option to run Remote Potato on startup and minimized in the System Tray. If you’re running Media Center on a dedicated HTPC, you’ll probably want to enable both startup options. Forwarding Ports on Your Router You’ll need to forward a couple ports on your router. By default, these will be ports 9080 and 9081. In this example we’re using a Linksys WRT54GL router, however, the steps for port forwarding will vary from router to router. On the Linksys configuration page, click on the Applications & Gaming Tab, and then the Port Range Forward tab. Under Application, type in a name of your choosing. In both the Start and End boxes, type the port number 9080. Enter the local IP address of your Media Center computer in the IP address column. Click the check box under Enable. Repeat the process on the next line, but this time use port 9081. When finished, click the Save Settings button. Note: It’s highly recommended that you configure the home computer running Media Center & Remote Potato with a static IP address.   Find your IP Address You’ll need to find the IP address assigned to your router from your ISP. There are many ways to do this but a quick and easy way is to visit a site like checkip.dyndns.org (link available below) The current external IP address of your router will be displayed in the browser.   Dynamic DNS This is an optional step, but  it’s highly recommended. Many routers, such as the Linksys WRT54GL we are using, support Dynamic DNS (DDNS). What Dynamic DNS allows you to do is affiliate your home router’s external IP address to a domain name. Every time your home router is assigned a a new IP address by your ISP, the domain name is updated to point to your new IP address. Remote Potato’s user interface is accessed over the Internet is by connecting to your router’s IP address followed by a colon and the port number. (Ex: XXX.XXX.XXX.XXX:9080) Instead of constantly having to look up and remember an IP address, you can use DDNS along with a 3rd party provider like DynDNS.com, to sign up for a free domain name and configure it to be updated each time your router is assigned a new IP address. Go to the DynDNS.com website (See link at the end of the article) and sign up for a free Domain name. You’ll need to register and confirm by email.   Once you’ve signed in and selected your domain name click Activate Services. You’ll get a confirmation message that your domain name has been activated.    On the Linksys WRT54GL click on the Setup tab an then DDNS. Select DynDNS.org, or TZO.com if you prefer to use their service, from the drop down list.   With DynDNS, you’ll need to fill in your username and password you signed up with at the DynDNS website and the hostname you chose. Note: You can connect over your local network with the IP Address of the computer running Remote Potato followed by a colon and the port number. Ex: 192.168.1.2:9080 Logging in Remote Potato and Recording a Show Once you connect, you’ll see the start page. To view the TV listings, click on TV Guide. You’ll then see your guide listings. There are a few ways to navigate the listings. At the top left, you can click on any of the preset time buttons to jump to  the listings at that time of the day.  Click on the arrows to the right and left of the day and date at the top center to proceed to the previous or next day. Or, jump to a specific day with the date and date buttons at the top right.   To setup a recording, click on a program.   You can choose to record the individual show or the entire series by clicking on Record Show or Record Series.   Remote Potato on Mobile Devices Perhaps the coolest feature of Remote Potato is the ability to schedule recording from your phone or mobile device. Note: For any devices or computers without Silverlight, you will be prompted to view the HTML page. Select Browse Listings. Select your program to record. In the Program Details, select Record Show to record the single episode or Record Series to record all instances of the series. You will then see a red dot on the program listing to indicate that the show is scheduled for recording.   Streaming Recorded TV Click on Recorded TV from the home screen to access your previously recorded TV programs. Click on the selection you wish to stream. Click on Play. If you receive this error message, you’ll need to install the streaming pack for Remote Potato. This is found on the same download page as installation files. (See link below) The Begin from slider allows you to start playback from the start (by default) or a different time of the program by moving the slider. The Quality (bitrate) setting  allows you to choose the quality of the playback. We found the video quality on the Normal setting to be pretty lousy, and Low was just pointless. High was the best overall viewing experience as it provided smooth quality video playback. We experienced significant stuttering during playback using the Ultra High setting.   Click Start when you are ready to begin. When playback begins you’ll see a slider at the top right.   Move the slider left or right to increase or decrease the size of the video. There’s also a button to switch to full screen.   Media Center users who travel frequently or are always on the go will likely find Remote Potato to be a blessing. Since being released earlier this year, updates for Remote Potato have come fast and furious. The latest beta release includes support for streaming music and photos. If you like those nice network TV logos, check out our article on adding TV channel logos to Windows Media Center. Downloads and Links Download Remote Potato and Streaming Pack Find your IP address Sign Up for a Domain Name at DynDNS.com Similar Articles Productive Geek Tips Schedule Updates for Windows Media CenterUsing Netflix Watchnow in Windows Vista Media Center (Gmedia)Add a Sleep Timer to Windows 7 Media CenterStartup Customizations for Media Center in Windows 7Enable Media Streaming in Windows Home Server to Windows Media Player TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos

  Read the article

• How To Run XP Mode in VirtualBox on Windows 7 (sort of)

  - by Matthew Guay

  A few weeks ago we showed you how to run XP Mode on a Windows 7 computer without Hardware Virtualization using VMware. Some of you have been asking if it can be done in Virtual Box as well. The answer is “Yes!” and here we’ll show you how. Editor Update: Apparently there isn’t a way to activate XP Mode through VirtualBox using this method. You will however, be able to run it for 30 days. We have a new updated article on how to Install XP Mode with VirtualBox Using the VMLite Plugin.   Earlier we showed you how to run XP mode on windows 7 machines without hardware virtualization capability. Since then, a lot of you have been asking to a write up a tutorial about doing the same thing using VirtualBox.  This makes it another great way to run XP Mode if your computer does not have hardware virtualization.  Here we’ll see how to import the XP Mode from Windows 7 Professional, Enterprise, or Ultimate into VirtualBox so you can run XP in it for free. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. In our tests we were able to get it to run on Home Premium as well, but you’ll be breaking Windows 7 licensing agreements. Getting Started First, download and install XP Mode (link below).  There is no need to download Virtual PC if your computer cannot run it, so just download the XP Mode from the link on the left. Install XP mode; just follow the default prompts as usual. Now, download and install VirtualBox 3.1.2 or higher(link below).  Install as normal, and simply follow the default prompts. VirtualBox may notify you that your network connection will be reset during the installation.  Press Yes to continue. During the install, you may see several popups asking you if you wish to install device drivers for USB and Network interfaces.  Simply click install, as these are needed for VirtualBox to run correctly. Setup only took a couple minutes, and doesn’t require a reboot. Setup XP Mode in VirtualBox: First we need to copy the default XP Mode so VirtualBox will not affect the original copy.  Browse to C:\Program Files\Windows XP Mode, and copy the file “Windows XP Mode base.vhd”.  Paste it in another folder of your choice, such as your Documents folder. Once you’ve copied the file, right-click on it and click Properties. Uncheck the “Read-only” box in this dialog, and then click Ok. Now, in VirtualBox, click New to create a new virtual machine. Enter the name of your virtual machine, and make sure the operating system selected is Windows XP. Choose how much memory you want to allow the virtual machine to use.  VirtualBox’ default is 192 Mb ram, but for better performance you can select 256 or 512Mb. Now, select the hard drive for the virtual machine.  Select “Use existing hard disk”, then click the folder button to choose the XP Mode virtual drive. In this window, click Add, and then browse to find the copy of XP Mode you previously made. Make sure the correct virtual drive is selected, then press Select. After selecting the VHD your screen should look like the following then click Next. Verify the settings you made are correct. If not, you can go back and make any changes. When everything looks correct click Finish. Setup XP Mode Now, in VirtualBox, click start to run XP Mode. The Windows XP in this virtual drive is not fully setup yet, so you will have to go through the setup process.   If you didn’t uncheck the “Read-only” box in the VHD properties before, you may see the following error.  If you see it, go back and check the file to makes sure it is not read-only. When you click in the virtual machine, it will capture your mouse by default.  Simply press the right Ctrl key to release your mouse so you can go back to using Windows 7.  This will only be the case during the setup process; after the Guest Additions are installed, the mouse will seamlessly move between operating systems. Now, accept the license agreement in XP.   Choose your correct locale and keyboard settings. Enter a name for your virtual XP, and an administrative password. Check the date, time, and time zone settings, and adjust them if they are incorrect.  The time and date are usually correct, but the time zone often has to be corrected. XP will now automatically finish setting up your virtual machine, and then will automatically reboot. After rebooting, select your automatic update settings. You may see a prompt to check for drivers; simply press cancel, as all the drivers we need will be installed later with the Guest Additions. Your last settings will be finalized, and finally you will see your XP desktop in VirtualBox. Please note that XP Mode may not remain activated after importing it into VirtualBox. When you activate it, use the key that is located at C:\Program Files\Windows XP Mode\key.txt.  Note: During our tests we weren’t able to get the activation to go through. We are looking into the issue and will have a revised article showing the correct way to get XP Mode in VirutalBox working correctly soon.    Now we have one final thing to install – the VirtualBox Guest Additions.  In the VirtualBox window, click “Devices” and then select “Install Guest Additions”. This should automatically launch in XP; if it doesn’t, click Start, then My Computer, and finally double-click on the CD drive which should say VirtualBox Guest Additions. Simply install with the normal presets. You can select to install an experimental 3D graphics driver if you wish to try to run games in XP in VirtualBox; however, do note that this is not fully supported and is currently a test feature. You may see a prompt informing you that the drivers have not passed Logo testing; simply press “Continue Anyway” to proceed with the installation.   When installation has completed, you will be required to reboot your virtual machine. Now, you can move your mouse directly from Windows XP to Windows 7 without pressing Ctrl. Integrating with Windows 7 Once your virtual machine is rebooted, you can integrate it with your Windows 7 desktop.  In the VirtualBox window, click Machine and then select “Seamless Mode”.   In Seamless mode you’ll have the XP Start menu and taskbar sit on top of your Windows 7 Start and Taskbar. Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. Another view of everything running seamlessly together on the same Windows 7 desktop. Hover the pointer over the XP taskbar to pull up the Virtual Box menu items. You can exit out of Seamless Mode from the VirtualBox menu or using “Ctrl+L”. Then you go back to having it run separately on your desktop again. Conclusion Running XP Mode in a Virtual Machine is a great way to experience the feature on computers without Hardware Virtualization capabilities. If you prefer VMware Player, then you’ll want to check out our articles on how to run XP Mode on Windows 7 machines without Hardware Virtualization, and how to create an XP Mode for Windows 7 Home Premium and Vista. Download VirtualBox Download XP Mode Similar Articles Productive Geek Tips Install XP Mode with VirtualBox Using the VMLite PluginUsing Windows 7 or Vista Compatibility ModeMake Safari Stop Crashing Every 20 Seconds on Windows VistaForce Windows 7 / Vista to Boot Into Safe Mode Without Using the F8 KeyHow To Run Chrome OS in VirtualBox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53  | Next Page >