Search Results

Search found 4141 results on 166 pages for 'router'.

Page 49/166 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

  • While updating the firmware on my parent's WNR3500v1, I bricked it

    - by Matt
    While updating the firmware on my parent's WNR3500v1, I bricked it. Basically, all that happens now is the power light just flashed. I tried pressing the factory reset button for up to a minute with the power on as well as with the power off. To no avail. Is there anything that can be done other than try to RMA it? Googling around, I found nothing promising. I'm wondering if anyone else has any other solution.

    Read the article

  • How to ping ip dslam which is in other subnet

    - by vito
    I want to ping ip dslam, which is in another subnet The connection is like this: MyPc-----Rj45----------Adsl2+ Modem---------Rj11-------Dslam 192.168.1.4----192.168.1.1---172.80.1.3-------------172.80.1.2 -----------------LanSide-----------WanSide--------------------- The modem is set to Static Ip Address Encapsulation. How can I ping ip dslam with this setup, or what do I need to change about the architecture?

    Read the article

  • DD-WRT login does not work on Linux in Virtualbox

    - by superuser
    I am running on Windows 8 and installed Lubuntu 13.04 in VirtualBox. I cannot login to DD-WRT in Virtualbox. I can login to DD-WRT on Windows 8. I have used the same credentials and tried many times, but to no avail. How can I login successfully to DD-WRT in VirtualBox? I have even tried searching on the Internet but I could not find any relevant solutions. Additional Information: Using Chromium ( I have tried it on Firefox and it does not work ) Enabled secure shell: but it still does not work. If you require more information, please kindly make a comment below.

    Read the article

  • Internet Connectivity Issue

    - by MastaChief11
    Lately, I have been having issues connecting to the internet on one of my computers. The computer I am using now, however, is on the same network as the computer I am posting from. The issues seemed to randomly start about 2 days ago, and the only thing that seemed to fix the issue was to connect to Hotspot Shield VPN. I do not get any yellow warning signs by the Wi-Fi icon in the taskbar. I am sometimes able to use Google search, but I can never go to a website. I am also not able to re-install Hotspot Shield or update Flash because they have to connect to their company's servers. I have tried other VPN services just to see if it would fix anything, but as I expected, nothing changed. I am unsure of how I can fix the issue, and I appreciate all help given. I am running Windows 7 64 Bit Pro on a custom-built computer. Thanks.

    Read the article

  • Combo ports and SFP

    - by Tahir
    I have Netgear GSM7324s prosafe switch. Switch has 24x1G ports. 4 ports are labeled as combo ports while 2 are labeled as SFP ports. I connected 2 PCs (each having 1gig and 10Gig NICs), with the switch using 1 & 10 Gig cables. Whenever, I ping the PCs the pinging is not working. As soon as, I removed the 10G cables, the ping starts working. Can someone please explain that what's going on. Also it would be very helpful if you can tell me the concept of combo ports, SFP ports in easy words?

    Read the article

  • Bridge 2 routers

    - by Nathan Adams
    I have 2 Linksys WRT54GL routers flashed with DD-WRT. On each I have a different ISP, and thus a different private network. I would like to be able to talk to either network regardless of what network I am on. Example: ISP1 - Router1 - Client ISP2 - Router2 - Client What I would like to do is something like: ISP1 - Router1 - Client              ^              |              v ISP2 - Router2 - Client This would be ideally because then I don't need to introduce another device in the mix, unless I have to. But I guess the first question is - is this even possible?

    Read the article

  • Wireless network relay?

    - by IPX Ares
    Is there hardware (links would be great) that can connect to the wireless internet already in my house and provide hard links to other hardware? Basically the problem is that my basement is not wired up to let me hook up my cable modem. I have some electronics that do not have wireless and need a LAN wire. Is there something I could plug in downstairs to act as a relay hub?

    Read the article

  • Using iptables to selectively route outgoing requests?

    - by Olivier
    Hello, I'd like to set up my Dd-WRT firewall so that it uses the VPN service from a VPN provider to access a bunch of destinations and normal route foe all other requests. In detail: giganews.com would be accessed thru VPN VyprVPN normal web sites such as amazon, ebay, et al thru transparent firewall. I've run nito reading SOOOO many tutorials but I can't get to understand what the different entities are. Any help? Thxs

    Read the article

  • Dual external internet connections

    - by cpf
    Hi ServerFault, We have here 2 Internet connections coming in. And the intention is to have all services available on our server which should be available externally, to be available through both connections. Also, one connection should be used as few as possible, except for certain protocols. How can I achieve this dual connection method?

    Read the article

  • Cisco IOS BVI ACL: Only allow established UDP

    - by George Bailey
    Related: Cisco IOS ACL: Don't permit incoming connections just because they are from port 80 I know we can use the established keyword for TCP.. but what can we do for UDP (short of replacing a Bridge or BVI with a NAT)? Answer I found out what "UDP has no connection" means. DNS uses UDP for example.. named (DNS server) is lisenting on port 53 nslookup (DNS client) starts listening on some random port and sends a packet to port 53 of the server and notes the source port in that packet. nslookup will retry 3 times if necessary. Also the packets are so small that it does not have to worry about them coming in the wrong order. If nslookup receives a response on that port that comes from the servers IP and port then it stops listening. If the server tried to send two responses (for example a response and a response to the retry) then the server would not care if either of them made it because the client has the job to retry. In fact.. unless ICMP 3/3 packet gets through the server would not know about a failure. This is different from TCP where you get connection closed or timed out errors. DNS allows for an easy retry from the client as well as small packets.. so UDP is an excellent choice because it is more efficient. In UDP you would see nslookup sends request named sends answer In TCP you would see nslookup's machine sends SYN named's machine sends SYN-ACK nslookup's machine sends ACK and the request named's machine sends the response That is much more than is necessary for a tiny DNS packet

    Read the article

  • How to prepare WiFi for an on-stage demo?

    - by Jeremy White
    Today at WWDC, Steve Jobs gave his keynote and ended up having a failure on-stage when connecting to WiFi. Google had a similar issue a few weeks ago in the same conference center. Please reference the following article for more information. http://news.cnet.com/8301-31021_3-20007009-260.html I am looking for information on how to best prepare a demo which uses a closed wireless network in front of a large audience. Note that the network will be closed, and will not require internet access. What steps can I take to prevent interference from existing WiFi, Bluetooth, etc? How can I best prevent curious/malicious people from trying to intrude on my WiFi network? I am open to recommendations on specific models of routers.

    Read the article

  • Combine multiple DNS filtering result

    - by Martheen Cahya Paulo
    Several DNS servers provide filtering against different categories, mostly for the local government 'undesirable content', some for malware, and some for ads. What I want is to create/use a DNS server that compare against those filtering DNS servers and only provide the address if all the DNS server agrees. For example if DNS server G provide a clean, unfiltered result, DNS server N provide malware and/or pornography filter, and DNS server F provide ad filter, then G, N and F will only provide the same/similar answer if the query is not categorized as malware, pornography, or advertising. Thus, by creating a server M that only answer if all DNS server agree, M effectively filter against all those categories. Maybe it's possible to do this on DDWRT or Tomato, but if not, I would settle for a solution that can be run in Linux/Windows.

    Read the article

  • How do I configure dual WAN links for failover on a Cisco 891?

    - by Donjo
    I have a Cisco 891 that is going to be connected to 2 WAN links, a DSL connection and a cable connection. I'm not so concerned with load balancing between them because the DSL connection speed is a drop in the bucket when compared to the cable speed though it would be nice if it worked that way. I mainly just want to force all traffic through the cable WAN link unless it goes down. I'm not really sure what feature set I should be researching.

    Read the article

  • How to get rid of NAT in a LAN?

    - by Alberto
    Currently the LAN I manage is organized as follows: internal network (192.168.1.0) which uses a Linux server as a gateway (internal address on interface br0 192.168.1.1, external address on interface br1 10.0.0.2) through NAT; then the 10.0.0.0 network has another gateway (10.0.0.1) which through another NAT connects the whole thing to the internet. What I would like to achieve is to configure the Linux server so that the first layer of NAT is no more necessary, so that for example a computer in the 10.0.0.0 network can ping every computer in the 192.168.1.0 network. I deleted this iptables rule: iptables -t nat -A POSTROUTING -o br1 -j SNAT --to-source 10.0.0.2, but of course now computers on 192.168.1.0 cannot reach the internet; ip forwarding is of course enabled. What's missing here? Thanks

    Read the article

  • NAT and ISP Subnet when load balancing on pfsense?

    - by dannymcc
    I have a pfsense box that I'm trying to plan the configuration for. I am going to be load balancing two ISP's, each with their own /29 static IP subnet. The question I have is in relation to the way those IP's are associated with workstations on the local network. Currently I have some workstations with local (192.168.1.0/29) IP addresses, and other more complicated workstation setups have their own public IP address. Some of the more complicated systems have a NAT 1:1 configuration where I forward a public IP address to a local IP address. Others however are directly on the ISP subnet and cannot be seen on our local network. Is this configuration possible with pfsense? If so, what terms should I be looking through the documentation for? Here is a simple/brief diagram of what I am trying to achieve.

    Read the article

  • Erratic WiFi 2.4 GHz channel spikes, what gives?

    - by Francis W. Usher
    Sorry guys, first a gripe about my neighbor's WiFi access point (it is related): they totally hog the center nine 2.4 GHz channels (3-11), centered right at 7! I know the outer regions of the signal don't make as much of a difference, and technically they're running channels 5 & 9. Anyway, their signal is clearly interfering with mine, which is necessarily centered at 3 or 11 to evade their interference. I guess it's somewhat a case of access point envy: they happen to have both a stronger signal and a higher data rate, while occupying twice the band width that I do. Getting to the point, I've noticed that they tend to sit nice and pretty centered at 7, but they definitely auto-select their channel, and I've noticed that the auto-selection algorithm tends to shift towards the higher channels; hence I decided to pick channel 3, and I don't get so many intermittent lag spikes any more. Anyway, the thing that weirded me out was the reason they have to auto-select sometimes: unexplained, powerful (talking order of 0dB here), giant spikes of 2.4 GHz activity in consistent regions of the spectrum. I don't think it's just noise, since my wireless monitoring software is registering a MAC address, a manufacturer, and usually a fairly coherent ascii name... and it seems to be a fairly well-confined signal. But these signals are fairly common, and they do some weird stuff to my signal. So my question is what are these signals? Where are they coming from? Where are they going? Why are they so ridiculously strong? Why don't they ever last very long? Here's an inSSIDer screenshot I took, for your perusal. I am labeled with "me", my greedy neighbor labeled with "neighbor", and the 2 quasar signals are labeled with "WTF?".

    Read the article

  • Routing Essentials

    - by zharvey
    I'm a programmer trying to fill a big hole in my understanding of networking basics. I've been reading a good book (Networking Bible by Sosinki) but I have been finding that there is a lot of "assumed" information contained, where terms/concepts are thrown at the reader without a proper introduction to them. I understand that a "route" is a path through a network. But I am struggling with visualizing some routing-based concepts. Namely: How do routes actually manifest themselves in the hardware? Are they just a list of IP addresses that get computed at the network layer, and then executed by the transport? What kind of data exists in a so-caleld routing table? Is a routing-table just the mechanism for holding these lists of IP address (read above)? What are the performance pros/cons for having a static route, as opposed to a dynamic route?

    Read the article

  • What are the requirements for Windows Remote Assistance over Teredo?

    - by Jens
    I try to get the Windows 7 (or Vista) remote assistance feature to work, without using UPnP on the novices computer. After enabling Teredo on the expert's computer (that is in a corporate network, and therefore has teredo disabled by default), I tried to connect to the novice both using Easy Connect and the invitation file with no success. My triubleshooting included the following (so far). A connection to the novice from my home pc was successful, hinting at a misconfiguration on the experts side. Both computers have a "qualified" connection to the Teredo Server. Both computers have a valid Teredo IP, access to the Global_ PNRP cloud and can resolve names registered with PNRP on the other computer. The expert can resolve the PNRP Id automatically generated with an Easy Connect help request Both computers can ping the other's PNRP name. Both computers can ping the other's Teredo IP Address using ping -6 Now, I am a little stumped. I expected Remote Assistance to work at this point, since my corporate firewall has no Teredo filtering. What could RA cause not to work in this setting? Thanks in advance!

    Read the article

  • Technicolor TG582n with external DHCP server [on hold]

    - by Jack
    We have a small home setup with a Technicolor TG582n on Plusnet ISP. We have a Samba4 DC with DNS forwarding enabled. The DC forwards to the Technicolor. However, the client machines have their DNS settings manually set. This is an annoyance when using laptops on other networks. We would like to have DHCP handled on the server machine, such that when a client connects to the Technicolor, it gets its IP and DNS information from the DHCP server, eliminating the need to manually set adapter DNS settings. However, I cannot find an option to disable DHCP on the Technicolor and am not completely clear on how one would point DHCP services to the server from the Technicolor if there were the option. So, how would one make the Technicolor use an external server for DHCP leases?

    Read the article

  • how to separate a network for traffic

    - by Student_CVO
    At the moment our all computers in one big LAN, it is the intention to separate the admin and edu (it's in a school) especially for traffic and less for security. How do this best? I have a drawing, but can't post it (a can send it in a mail) Firewall?, VLAN?, IPCop (no two green zones)?, pfsense? ... Should there be two scopes on the dhcp server (WIN 2008 R2), one for admin and one for edu or is one scope enough? I would like your advice, I am a student in training with this task as a project. Thanks

    Read the article

  • Setup VPN network for PS3

    - by L Franco
    Getting informed on setting up a home network so i can use VPN on my PS3, i live in Mexico but want the programming available in the US. Getting a little confused as every sites gives you different options, both in hardware and software. specially on subjects like dd-wrt, dns or vpn options... i know there is no "best" setup, but are there any tried and true?? Options in hardware and software would be apreciated...

    Read the article

  • Issue Connecting two home networks

    - by Alex
    Hi, I have a home networking question. I have two DLINK wireless/wired routers in my house, connected to the Internet ISP. There are a 2 computers on each of the two networks. Network1: has 192.168.0.0 (gateway) Valid IP'S range - 192.168.0.1 - 192.168.0.10, with COMP1 having a fixed IP of 162.168.0.1 Network2: has 192.168.0.100 (gateway) Valid IP'S range - 192.168.0.101 - 192.168.0.110 with COMP2 having a static IP of 162.168.0.101, a WIRELESS printer on 192.168.0.102 Both routers have a netmask of 255.255.255.0 My need is to connect the two routers, so that I can Remote desktop for COMP1 to COMP2 and viceversa, and COMP1 to connect to the wireless printer on Network2. can anyone help to set this up so that the both networks can talk to each other. Any help is appreciated. -Alex

    Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >