Search Results

Search found 19676 results on 788 pages for 'setup cd'.

Page 49/788 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

• how to setup a bridge with 2 NICs and few virtual machines

  - by Bond

  Here is my situation. I have a server with 2 NICs. I have installed virtual box and I have created a few Guest Operating Systems on it. I want these Virtual Machines to be using a bridge.NIC2 would be used to setup this bridge and NIC1 would be connected to corporate network.I am not clear with how should I go on doing this. /etc/network/interfaces is the file which I am trying to modify etc. My approach is following 1) Define a configuration file /etc/network/interfaces 2) Create IPTABLES as how NIC1 will forward the packets to Bridge on NIC2 Now comes the problem I do not understand what is the meaning of following lines in the configuration file auto lo iface lo inet loopback # The primary network interface auto eth2 iface eth2 inet manual auto br0 iface br0 inet static address 192.168.1.14 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.10 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 192.168.13.2 dns-search myserver.net bridge_ports eth2 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off So any pointers to what should be the entries of /etc/network/interfaces file. So that I understand which parameter is to be used when and where that would help me.

  Read the article

• Struggling with proper way to setup Permissions on Linux/Apache Web Server

  - by Dr. DOT

  Your expert experience and assistance is great, greatly appreciated here. I have been running a LAMP server for a long time, yet I still struggle with the best way to set file & directory permissions for FTP and WWW protocol activity. My Control panel is WHM/cPanel (not that it makes a difference), and out-of-the box: files are owned by the user account setup in WHM (eg, "abc") files have a group setting of "abc" as well file permissions are created with 644 directories are owned by "abc" directories have a group setting of "abc" directories permissions are created with 0755 Again, these are the default permission settings. Now everything is fine with FTP activity, but please advise me if any of these file/directory settings create issues, especially with security. Here's where my struggle comes into play. I have PHP apps that allow a visitor to create, edit, rename, delete, etc. sub-directories and files in certain selected directories. PHP runs as "nobody" on my server. So in order to get my PHP/Web apps to work, I have had to: chown nobody * chgrp nobody * chmod 0777 * to everything in these certain & selected sub-directories. I know this is probably a huge security whole (so don't ask me for any links :) but how should I set all the permissions to allow my FTP user to do his thing while allowing the PHP apps to do their thing will also "minimizing" any security risks and exposures? I know that big CMS systems like Drupal, Joomla, WordPress and so on, handle this. Thanks ahead of time for reading through this and offering your expert advice!

  Read the article

• LAMP Setup, PHP's session_start permission denied

  - by Andrew

  I'm trying to set up a development environment for a legacy system that runs CentOS 4.8, PHP 4.3.9, and MySQL 4.1.22. I'm matching OS and software versions to keep the development server as close to the production server as possible. When I fire up PHPMyAdmin's setup script (version 2.11.10.1, of course) the installation errors out and I see these errors in my error log: [client 172.18.141.74] PHP Warning: session_start(): open(/var/lib/php/session/sess_b5b90f86bd3dcfad315ff24cb7483a79, O_RDWR) failed: Permission denied (13) in /home/www/intranet/phpmyadmin/libraries/session.inc.php on line 87 [client 172.18.141.74] PHP Warning: Unknown(): open(/var/lib/php/session/sess_b5b90f86bd3dcfad315ff24cb7483a79, O_RDWR) failed: Permission denied (13) in Unknown on line 0 [client 172.18.141.74] PHP Warning: Unknown(): Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/var/lib/php/session) in Unknown on line 0 I've done some searching on ServerFault and on teh Googles and I see that a common reason for this error is that the session.save_path isn't writable by the www user. I also found where in /etc/php.ini this URL is set: session.save_path. My session.save_path is set to: session.save_path = /var/lib/php/session I've since changed the owner and the group of /var/lib/php/session and still have the same error. Here's the result of ls -la for /var/lib/php [root@localhost php]# ls -la total 24 drwxrwxr-x 3 www www 4096 Oct 23 20:21 . drwxr-xr-x 17 root root 4096 Oct 23 20:31 .. drwxrwx--- 2 www www 4096 Jun 1 2009 session ...But I'm still getting the same error. Is there another possibility for why I'm getting this error?

  Read the article

• How to setup port forwarding from my Webserver (apache) to my Database server (mysql)

  - by karman888

  Hello again guys, and thank you for your help so far. Here is my problem: I have two remote dedicated servers, one webserver that runs apache, and one db server that runs mysql. The apache server is visible on the internet of course, but the second server is only visible to the apache server because they are connected with LAN. I need to connect to the remote mysql server through internet from my home-pc , but only apache server is visible to my home-pc. How can i setup port-forwarding from my apache server to the mysql server so i will be able to "see" the mysql server from my home-pc? This question is a follow-up from my first question Connect to remote mysql server from my application. Problem is that Mysql server is on LAN in which you answered me and helped me a lot by telling me to do "port-forwarding". I looked over the internet, and i cant find a good how-to to do port-forwarding. I'm an experienced programmer, but have little experience on hardware and networks. I can understand though what must be done, so i just need a litle help to sort things out :) I hope you can help me guys, Thank you in advance p.s. machine that Apache is running is on CentOS, mysql server also CentOS. p.s2 webserver runs WebHostManager i dont know if that makes any difference or it can be made easily through this, i just mention it :)

  Read the article

• esx5 debian VM vlan setup

  - by Kstro21

  i have a server with ESX5, have a switch with about 20 vlans, this is how setup the trunk port interface GigabitEthernet0/1/1 description ToOper port link-type trunk undo port trunk allow-pass vlan 1 port trunk allow-pass vlan 2 to 14 stp disable ntdp enable ndp enable bpdu enable then, i created a standar switch(sw1) using the vSphere Client, the VLAN ID is set to All (4095), i also created a VM with Debian 6, with a NIC connected to sw1, now, i want to configure this NIC for a selected group of vlans auto vlan10 iface vlan10 inet static address 11.10.1.0 netmask 255.255.255.224 mtu 1500 vlan_raw_device eth0 auto vlan14 iface vlan14 inet static address 11.10.1.65 netmask 255.255.255.248 mtu 1500 vlan_raw_device eth0 so, when i restart the network using /etc/init.d/networking restart, i got this error Reconfiguring network interfaces...SIOCSIFADDR: No such device vlan14: ERROR while getting interface flags: No such device SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device vlan14: ERROR while getting interface flags: No such device SIOCSIFMTU: No such device vlan14: ERROR while getting interface flags: No such device Failed to bring up vlan14. done. this is just part of the error, so, my questions is: is this possible?, i mean, what i'm trying to achieve using ESX Virtual Machines, VLANS, etc is this a Debian problem? can be solved? i've read about a file named z25_persistent-net.rules in Debian but it doesn't exist in my installation. in the In the vSphere Networking for ESX5 guide, you can read: If you enter 0 or leave the option blank, the port group can see only untagged (non-VLAN) traffic. If you enter 4095, the port group can see traffic on any VLAN while leaving the VLAN tags intact. So, in theory, it should work, right? Hope you can help me up with this one Thanks

  Read the article

• Setup windows 2012 AD in Hyper-V for a Test environment

  - by hub

  Im trying to setup a Windos 2012 R2 test environment on my work computer (a laptop). I have a AD, DHCP and DNS server on server A, and a client connecting to the doman and that works. The client can ping the AD server and gets a valid IP adress. If I ping google.com from the client I get the IP adress but I dont get any responses (request time out). If i ping google.com from server A it works as it should. Server A have a connection to the Internet through a "external network switch" in hyper-v, which gets its internet from a router and the client is connected to a "internal network switch". May the poblem be that server A is behind a router? Can I make this solution to work regadless the network my laptop is connected to? At home i have one IP adress, at work its a totally different range. What I would like is to use my laptops internet connection, regardless wifi or wired, to act as incomming internet, is this possible?

  Read the article

• CentOS 6.5 x64 + Ajendi +nginx + php-fpm + mysql setup unable to load the PHP page

  - by Francis

  I'm using Ajendi to setup a PHP web server, I can load the PHP info page, when I try to load the PHP copy from other server, I get a blank page with this log appear on access log, I have no clue what was wrong and troubleshoot further, please advice. x.x.x.x - - [28/May/2014:10:08:37 -0400] "GET /index.php HTTP/1.1" 200 31 "-" "Mozilla/5.0 (Windows NT 6.1; rv:29.0) Gecko/20100101 Firefox/29.0" 2.6.32-431.1.2.0.1.el6.x86_64 cat /etc/redhat-release CentOS release 6.5 (Final) The vhost config AUTOMATICALLY GENERATED - DO NO EDIT! server { listen *:80; server_name test.com www.test.com; access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; root /www; index index.html index.htm index.php; location ~ \.php$ { alias /www; fastcgi_index index.php; include fcgi.conf; fastcgi_pass unix:/var/run/php-fcgi-php-fcgi-0.sock; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } }

  Read the article

• Computer hangs at BIOS screen. Cannot enter setup

  - by d2jxp

  I have an HP Pavilion a6500f (it's a year out of warranty) and it's hanging on the blue HP BIOS screen. If I mash F10 while it's starting up, it will say "Entering Setup..." but I will see no results. It will hang there and not do anything. If I actually wait until I can see the screen and then hit F10, there's no response at all and the computer will sit at the BIOS menu. I've dusted and cleaned it out, reseated the memory, switched the RAM slots, and reset the CMOS battery using the reset jumper. I'm out of ideas. I'm pretty sure it's not a hard drive issue, since my problem is at the BIOS. After this post, I'll disconnect the hard drive and try to just boot without it. Anyone have any other ideas? Edit: Okay, so I tried disconnecting the hard drive and now I can get back into the BIOS. I reconnected it and I'm locked out again. So the problem is my hard drive.. I guess I should delete this post unless someone has any ideas as to what's wrong with the drive?

  Read the article

• How to setup Joomla CMS as a backend for iPhone app

  - by srik

  I would like my iPhone app to get dynamic content off the net. This content should be managed using a CMS. I have gone ahead and installed Joomla on my server and will be using the Joomla web interface to create and manage content. I would now like the iPhone app to login to my server and fetch the content. I do not want the complete web pages for my iPhone app. Instead, I want the content in the form of XML or JSON or some serialized format so that I can use the data in a custom layout native to the app. So I am looking for 2 things in particular: 1. How to setup HTTP based authentication for my iPhone app to access data from my server. 2. How to access the content in a serialized format (XML, JSON etc) Are there plugins/extensions/components I can use to achieve the same. Any advice on how this can be achieved would be helpful. I am completely new to setting up/using CMS.

  Read the article

• How to setup Joomla CMS as a backend for iPhone app

  - by srik

  I would like my iPhone app to get dynamic content off the net. This content should be managed using a CMS. I have gone ahead and installed Joomla on my server and will be using the Joomla web interface to create and manage content. I would now like the iPhone app to login to my server and fetch the content. I do not want the complete web pages for my iPhone app. Instead, I want the content in the form of XML or JSON or some serialized format so that I can use the data in a custom layout native to the app. So I am looking for 2 things in particular: 1. How to setup HTTP based authentication for my iPhone app to access data from my server. 2. How to access the content in a serialized format (XML, JSON etc) Are there plugins/extensions/components I can use to achieve the same. Any advice on how this can be achieved would be helpful. I am completely new to setting up/using CMS.

  Read the article

• Server installation logging / logbook / diary?

  - by The MYYN

  Are there some ways field-tested ways to keep a kind of logbook for a server? Including: software installations (and de-installations) custom configurations (e.g. of a webserver, ssh daemon, etc.) personal notes The big picture. I am preparing a server and would like to extensively document the state and how it was established over time, so that a new person can easily see, what's going on and why. The setup is not too complicated, but I would like to do it anyway. I once used something like Maintain /etc with mercurial on Debian and it was nice, but I am looking for a little more flexible solution. Addendum: So I am interested in logging and documentation first. In an ideal world however, I would like to have a command, which in a few steps would take me from a bare newly installed unix system to a functional environment with all the components setup and in place by the means of, say an 'executable' log. But that would be very ideal, I imagine.

  Read the article

• Reverse NAT Setup for Hyper-V on Win 2008 R2

  - by sukru

  I'm trying to setup a Linux server behind a Windows Hyper-V host that will help supply some of the services (SSH, HTTPS, etc). However getting RRAS configured for reverse NAT (port forwarding) turned out to be a non trivial task. As a staring point, I tried forwarding port 22 (SSH) to the virtual machine. The virtual machine is on a public interface (i.e.: it also has a visible IP on the same network as the host). On RRAS management console I tried to add a rule, by adding "Local Area Connection" to NAT pool (Public Interface - Enable Nat), and an incoming rule for port 22 - :22. I also tried with the same port enabled on Windows Firewall (and not). The NAT management page tells there are "1 mappings" and "30+ Outbound packets transleted". However all other counters (Inbound packets translated, and respective rejected ones) are always zero. (I'm trying to access the server from an external machine). I can directly access the service if I give the VM's public IP, but not the host's one. Is there a way to enable this on RRAS?

  Read the article

• Winodws server 2003 Setup

  - by Barracksbuilder

  I work at a university maintaining the computer science department server. I am looking for a more economical way to stream line the set up of student accounts. CS students are granted a Username and password an IIS virtual directory, FTP virtual directory, and a mysql database. Server is running windows server 2003R2 (Possibly migrating to 2008R2) The server is running a domain though no students physically log a terminal into it (No computers are part of my domain.) Creating the account is a manual process. I did right a PHP script to query the Universities AD and copy the information and write it to my AD. I then have to create basically the users home directory. I tried having AD do it but since the user never physically logs in it never creates the directory. Permissions on this folder are set to User - full, Instructors (group) - full, Users (group) - read, IUSER - read. Inside of the users folder their is a "Private" folder with permissions User - full, instructors (group) - full. Next step is IIS I create a virtual directory in the default web site pointed to the users home directory so they have a website. Same goes for FTP virtual directory in the default ftp configuration to allow the users to upload files to their website. Mysql I have to create a user and password then create a mysql scheme (database) full access for the user and full access to the instructors account to be able to access the students database. All of this is done manually and takes me a week to do. The closest description is maybe a shared hosting environment. Is there a better way to do this? Scripting wise, or better structure setup?

  Read the article

• Configuration file 'C:\my\App.Config' is being used to configure all executables

  - by Taylor Leese

  I have a Visual Studio setup project that installs an application into the task scheduler and also installs a GUI application to manage some configuration parameters in the registry. This being the case, the setup project installs two different primary outputs (.exe's) as part of the process. I am getting the following warning when I rebuild the setup project: Configuration file 'C:\my\App.Config' is being used to configure all executables Is there any way to remove this warning? The suggested MSFT solution apears to be to use a different setup project for each .exe, but I only want the users to have to run one installer. Any suggestions?

  Read the article

• iptables (NAT/PAT) setup for SSH & Samba

  - by IanVaughan

  I need to access a Linux box via SSH & Samba that is hidden/connected behind another one. Setup :- A switch B C |----| |---| |----| |----| |eth0|----| |----|eth0| | | |----| |---| |eth1|----|eth1| |----| |----| Eg, SSH/Samba from A to C How does one go about this? I was thinking that it cannot be done via IP alone? Or can it? Could B say "hi on eth0, if your looking for 192.168.0.2, its here on eth1"? Is this NAT? This is a large private network, so what about if another PC has that IP?! More likely it would be PAT? A would say "hi 192.168.109.15:1234" B would say "hi on eth0, traffic for port 1234 goes on here eth1" How could that be done? And would the SSH/Samba demons see the correct packet header info and work?? IP info :- A - eth0 - 192.168.109.2 B - eth0 - B1 = 192.168.109.15 B2 = 172.24.40.130 - eth1 - 192.168.0.1 C - eth1 - 192.168.0.2 A, B & C are RHEL (RedHat) But Windows computers can be connected to the switch. I configured the 192.168.0.* IPs, they are changeable. Update after response from Eddie Few problems (and Machines' B IP is different!) From A :- ssh 172.24.40.130 works ok, (can get to B2) but ssh 172.24.40.130 -p 2022 -vv times out with :- OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 172.24.40.130 [172.24.40.130] port 2022. ...wait ages... debug1: connect to address 172.24.40.130 port 2022: Connection timed out ssh: connect to host 172.24.40.130 port 2022: Connection timed out From B2 :- $ service iptables status Table: filter Chain INPUT (policy ACCEPT) num target prot opt source destination Chain FORWARD (policy ACCEPT) num target prot opt source destination 1 ACCEPT tcp -- 0.0.0.0/0 192.168.0.2 tcp dpt:22 Chain OUTPUT (policy ACCEPT) num target prot opt source destination Table: nat Chain PREROUTING (policy ACCEPT) num target prot opt source destination 1 DNAT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:2022 to:192.168.0.2:22 Chain POSTROUTING (policy ACCEPT) num target prot opt source destination Chain OUTPUT (policy ACCEPT) num target prot opt source destination And ssh from B2 to C works fine :- $ ssh 192.168.0.2 Route info :- $ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 * 255.255.255.0 U 0 0 0 eth1 172.24.40.0 * 255.255.255.0 U 0 0 0 eth0 169.254.0.0 * 255.255.0.0 U 0 0 0 eth1 default 172.24.40.1 0.0.0.0 UG 0 0 0 eth0 $ ip route 192.168.0.0/24 dev eth1 proto kernel scope link src 192.168.0.1 172.24.40.0/24 dev eth0 proto kernel scope link src 172.24.40.130 169.254.0.0/16 dev eth1 scope link default via 172.24.40.1 dev eth0 So I just dont know why the port forward doesnt work from A to B2?

  Read the article

• kernel panic after LVM setup

  - by Manuel Sopena Ballesteros

  I broke my webserver... My setup is: VMWare ESXi environemt CPanel installed CentOS release 6.5 (Final) 4 CPUs 2G RAM 2x VM disks 100G each LVM system This was my previous storage settings (the server was working fine at this time): # df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_test01-lv_root 95G 1.4G 88G 2% / tmpfs 939M 0 939M 0% /dev/shm /dev/sdb1 99G 188M 94G 1% /tmp /dev/sda1 485M 54M 407M 12% /boot My web developer asked me to merge /tmp and / disks so this is what I did: Delete /dev/sdb1 partition using fdisk Create a new partition as LVM on /dev/sdb1 using fdisk Create a new physical volume -- pvcreate /dev/sdb1 Extend volume group -- vgextend /dev/sdb1 vg_test01 Extend logical volume -- lvextend -l +100%FREE /dev/vg_test01/lv_root Resize filesystem -- resize2fs /dev/vg_test01/lv_root This is the new configuration: # df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_test01-lv_root 213G 105G 97G 52% / tmpfs 939M 0 939M 0% /dev/shm /dev/sda1 485M 54M 407M 12% /boot /usr/tmpDSK 4.0G 145M 3.6G 4% /tmp Since I have the new settings my web server is throwing kernel panics quite often (around every 2 days). The message says: INFO: task <taskName>:<pid> blocked for more than 120 seconds. The list of process affected that I can see from the console are: mysqld queueprocd httpd suphp vmtoolsd loop0 auditd The only way I can fix this is reseting (cold reboot) the VM. I don't think it is a hardware issue as sar is not showing any bottleneck: Linux 2.6.32-431.3.1.el6.x86_64 (test01) 08/22/2014 _x86_64_ (4 CPU) 12:00:01 AM CPU %user %nice %system %iowait %steal %idle 12:10:01 AM all 26.86 0.01 0.98 0.57 0.00 71.57 12:20:01 AM all 1.78 0.02 1.03 0.08 0.00 97.09 12:30:01 AM all 26.34 0.02 0.85 0.05 0.00 72.74 12:40:01 AM all 27.12 0.01 1.11 1.22 0.00 70.54 12:50:01 AM all 1.59 0.02 0.94 0.13 0.00 97.32 01:00:01 AM all 26.10 0.01 0.77 0.04 0.00 73.07 01:10:01 AM all 27.51 0.01 1.16 0.14 0.00 71.18 01:20:01 AM all 1.80 0.07 1.06 0.08 0.00 96.99 01:30:01 AM all 26.19 0.01 0.78 0.05 0.00 72.96 01:40:01 AM all 26.62 0.02 0.87 0.05 0.00 72.45 01:50:02 AM all 1.35 0.01 0.87 0.02 0.00 97.75 02:00:01 AM all 26.11 0.02 0.69 0.02 0.00 73.17 02:10:01 AM all 26.73 0.02 0.89 0.14 0.00 72.21 02:20:01 AM all 1.45 0.01 0.92 0.04 0.00 97.58 02:30:01 AM all 26.59 0.01 1.06 0.03 0.00 72.31 02:40:01 AM all 26.27 0.01 0.72 0.05 0.00 72.95 02:50:01 AM all 0.86 0.01 0.50 0.09 0.00 98.53 03:00:01 AM all 25.61 0.02 0.39 0.03 0.00 73.96 03:10:01 AM all 26.30 0.08 0.66 0.14 0.00 72.82 03:20:01 AM all 0.81 0.01 0.51 0.04 0.00 98.63 03:30:02 AM all 26.15 0.02 0.53 0.07 0.00 73.24 03:40:01 AM all 26.06 0.01 0.47 0.04 0.00 73.42 03:50:01 AM all 0.96 0.02 0.51 0.03 0.00 98.48 Average: all 17.69 0.02 0.79 0.14 0.00 81.36 06:58:14 AM LINUX RESTART 07:00:01 AM CPU %user %nice %system %iowait %steal %idle 07:10:01 AM all 1.04 0.02 0.57 0.95 0.00 97.42 07:20:02 AM all 0.66 0.01 0.39 0.06 0.00 98.87 07:30:01 AM all 25.71 0.01 0.45 0.16 0.00 73.67 07:40:01 AM all 25.88 0.01 0.35 0.08 0.00 73.68 07:50:01 AM all 1.13 0.02 0.55 0.11 0.00 98.19 As you can see the server became unresponsive at 03.50 AM and I had to reset the VM at 06.58 AM to bring the website up again. I would appreciate any help/assistance to fix this issue. thank you very much

  Read the article

• Triple monitor setup in linux

  - by Brendan Abel

  I'm hoping there are some xorg gurus out there. I'm trying to get a three monitor setup working in linux. I have 2 lcd monitors and a tv, all different resolutions. I'm using 2 video cards; a 9800 GTX and 7900Gt. I've seen a lot of different posts about people trying to make this work, and in every case, they either gave up, or Xinerama magically solved all their problems. Basically, my main problem is that I cannot get Xinerama to work. Every time I turn it on in the options, my machine gets stuck in a neverending boot cycle. If I disable Xinerama, I just have three Xorg screens, but I can't drag windows from one to the other. I can get the 2 lcds on Twinview, and the tv on a separate Xorg screen no problem. But I don't really like this solution. I'd rather have them all on separate screens and stitch them together with Xinerama. Has anyone done this? Here's my xorg.conf for reference. p.s. This took me all of 30 seconds to set up in Windows XP! p.s.s. I've seen somewhere that maybe randr can solve my problems? But I'm not quite sure how? Section "Monitor" Identifier "Main1" VendorName "Acer" ModelName "H233H" HorizSync 40-70 VertRefresh 60 Option "dpms" EndSection #Section "Monitor" # Identifier "Main2" # VendorName "Acer" # ModelName "AL2216W" # HorizSync 40-70 # VertRefresh 60 # Option "dpms" #EndSection Section "Monitor" Identifier "Projector" VendorName "BenQ" ModelName "W500" HorizSync 44.955-45 VertRefresh 59.94-60 Option "dpms" EndSection Section "Device" Identifier "Card1" Driver "nvidia" VendorName "nvidia" BusID "PCI:5:0:0" BoardName "nVidia Corporation G92 [GeForce 9800 GTX+]" Option "ConnectedMonitor" "DFP,DFP" Option "NvAGP" "0" Option "NoLogo" "True" #Option "TVStandard" "HD720p" EndSection Section "Device" Identifier "Card2" Driver "nvidia" VendorName "nvidia" BusID "PCI:4:0:0" BoardName "nVidia Corporation G71 [GeForce 7900 GT/GTO]" Option "NvAGP" "0" Option "NoLogo" "True" Option "TVStandard" "HD720p" EndSection Section "Module" Load "glx" EndSection Section "Screen" Identifier "ScreenMain-0" Device "Card1-0" Monitor "Main1" DefaultDepth 24 Option "Twinview" Option "TwinViewOrientation" "RightOf" Option "MetaModes" "DFP-0: 1920x1080; DFP-1: 1680x1050" Option "HorizSync" "DFP-0: 40-70; DFP-1: 40-70" Option "VertRefresh" "DFP-0: 60; DFP-1: 60" #SubSection "Display" # Depth 24 # Virtual 4880 1080 #EndSubSection EndSection Section "Screen" Identifier "ScreenProjector" Device "Card2" Monitor "Projector" DefaultDepth 24 Option "MetaModes" "TV-0: 1280x720" Option "HorizSync" "TV-0: 44.955-45" Option "VertRefresh" "TV-0: 59.94-60" EndSection Section "ServerLayout" Identifier "BothTwinView" Screen "ScreenMain-0" Screen "ScreenProjector" LeftOf "ScreenMain-0" #Option "Xinerama" "on" # most important option let you window expand to three monitors EndSection

  Read the article

• Uninstall php and nginx or fix setup

  - by jreed121

  First off, I'm a huge linux noob - sorry... I'm trying to setup nginx with php-fpm on debian and I'm pretty sure that I've completely screwed it up. nginx seems to be running fine because I can it it from a web browser and it load the stock "Welcome to nginx!" page. I'm not so sure about php-fpm though. When I try something like # restart php-fpm I get: bash: restart: command not found First off php-fpm some how got installed as php5-fpm when I do root@server:/etc/init.d# ls, which seems to contradict every tutorial and help doc I've read (supposed to be 'php-fpm'). I can restart it with this: service php5-fpm restart And just enter the package name 'php5-fpm' I get this: root@server:~# php5-fpm [17-Nov-2012 23:15:36] NOTICE: PHP message: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525/suhosin.so' - /usr/lib/php5/20100525/suhosin.so: cannot open shared object file: No such file or directory in Unknown on line 0 [17-Nov-2012 23:15:36] ERROR: An another FPM instance seems to already listen on /var/run/php5-fpm.sock [17-Nov-2012 23:15:36] ERROR: FPM initialization failed The root for nginx is /usr/share/nginx/html, when I try to navigate to a .php file in there with my web browser, it tries to download the file instead of interpret it. I would like this folder to be in my user's home directory ie: /home/administrator/www or /home/nginx/www. I know in order to do this I need to modify nginx.conf, but I find that configuration file difficult to understand. I suppose the fact that my .php scripts aren't being handled is my bigger problem anyways. When I try to see what running on port 9000 (php-fpm default port) with lsof -i :9000 it returns nothing - I guess indicating that it isn't listening. then I head over to vim /etc/php5/fpm/php-fpm.conf and there is no where to designate a port number. So should I just uninstall everything and start from scratch? If so, how do I clean it all up? Any suggestions for a tutorial once I'm ready to try again? Should I attempt to troubleshoot this mess? If so where should I start? Sorry guys, I'm feeling pretty stupid and lost right now. I'm not sure what my next steps are in trying to resolve this issue are. I realize that this is a horrible question for this type of Q&A site, but I'd really appreciate any guidance.

  Read the article

• Trying to setup postfix

  - by Frexuz

  I used this guide: http://jonsview.com/how-to-setup-email-services-on-ubuntu-using-postfix-tlssasl-and-dovecot telnet localhost 25 says 220 episodecalendar.com ESMTP Postfix (Ubuntu) ehlo localhost 250-episodecalendar.com 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-AUTH LOGIN PLAIN 250-AUTH=LOGIN PLAIN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN Installation seems fine? /var/log/mail.log says Nov 26 14:04:06 ubuntu postfix/pickup[12107]: A742E2B9E1: uid=0 from=<root> Nov 26 14:04:06 ubuntu postfix/cleanup[12114]: A742E2B9E1: message-id=<[email protected]> Nov 26 14:04:06 ubuntu postfix/qmgr[12108]: A742E2B9E1: from=<[email protected]>, size=300, nrcpt=1 (queue active) Nov 26 14:04:06 ubuntu postfix/local[12115]: A742E2B9E1: to=<[email protected]>, relay=local, delay=3.3, delays=3.3/0/0/$ Nov 26 14:04:06 ubuntu postfix/cleanup[12114]: AD2662B9E0: message-id=<[email protected]> Nov 26 14:04:06 ubuntu postfix/qmgr[12108]: AD2662B9E0: from=<>, size=2087, nrcpt=1 (queue active) Nov 26 14:04:06 ubuntu postfix/bounce[12117]: A742E2B9E1: sender non-delivery notification: AD2662B9E0 Nov 26 14:04:06 ubuntu postfix/local[12115]: AD2662B9E0: to=<[email protected]>, relay=local, delay=0.02, delays=0.01/0/0/0$ Nov 26 14:04:06 ubuntu postfix/qmgr[12108]: AD2662B9E0: removed Nov 26 14:04:06 ubuntu postfix/qmgr[12108]: A742E2B9E1: removed I'm not really understanding the log file, and obviously I'm not getting any emails. Right now I'm running Ubuntu on a Virtualbox (development box). Is that a problem? The internet connection works fine on it. What about domains etc..? edit: /etc/postfix/main.cf # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client.

  Read the article

• "Hostile" network in the company - please comment on a security setup

  - by TomTom

  I have a little specific problem here that I want (need) to solve in a satisfactory way. My company has multiple (IPv4) networks that are controlled by our router sitting in the middle. Typical smaller shop setup. There is now one additional network that has an IP Range OUTSIDE of our control, connected to the internet with another router OUTSIDE of our control. Call it a project network that is part of another companies network and combined via VPN they set up. This means: They control the router that is used for this network and They can reconfigure things so that they can access the machines in this network. The network is physically split on our end through some VLAN capable switches as it covers three locations. At one end there is the router the other company controls. I Need / want to give the machines used in this network access to my company network. In fact, it may be good to make them part of my active directory domain. The people working on those machines are part of my company. BUT - I need to do so without compromising the security of my company network from outside influence. Any sort of router integration using the externally controlled router is out by this idea So, my idea is this: We accept the IPv4 address space and network topology in this network is not under our control. We seek alternatives to integrate those machines into our company network. The 2 concepts I came up with are: Use some sort of VPN - have the machines log into VPN. Thanks to them using modern windows, this could be transparent DirectAccess. This essentially treats the other IP space not different than any restaurant network a laptop of the company goes in. Alternatively - establish IPv6 routing to this ethernet segment. But - and this is a trick - block all IPv6 packets in the switch before they hit the third party controlled router, so that even IF they turn on IPv6 on that thing (not used now, but they could do it) they would get not a single packet. The switch can nicely do that by pulling all IPv6 traffic coming to that port into a separate VLAN (based on ethernet protocol type). Anyone sees a problem with using he switch to isolate the outer from IPv6? Any security hole? It is sad we have to treat this network as hostile - would be a lot easier - but the support personnel there is of "known dubious quality" and the legal side is clear - we can not fulfill our obligations when we integrate them into our company while they are under a jurisdiction we don't have a say in.

  Read the article

• Best RAID setup for multimedia fileserver?

  - by Mr. Schwabe

  I'm building a fileserver for my small office. We do film and multimedia design. Only 3 clients connected. The server is primarily for local access to graphic assets and video files. I'm looking for advice on hardware and software required. Particularly for the RAID. I have the following objectives: A) merged capacity I'd like all other systems to access the data as a single mapped network drive that has an initial capacity of 10 TB. So perhaps 5x 2TB drives (plus mirror drives for redundancy). B) easy way to increase capacity Thinking long term, I'd like to 'easily' add more drives to the array for a potential two or three fold increase in capacity. So theoretically it could get upto a 30 TB raid array consisting of maybe 15x 2 TB drives of capacity (plus mirror drives for redundancy). C) maximum fault tolerance I want at least 1 mirror drive per capacity drive (in laymen's terms). So if I start with 10 TB / 5x 2TB of capacity, I suppose I would need another another 5x 2TB drives to be mirrors. So 10 drives total. But I'd also like potential for even more redundancy; with upto 2 additional mirrors per 'capacity drive' (and to be able to add them to the array anytime with ease). D) easy way to monitor drive health I'd like an intuitive interface for managing the raid and monitoring drive health The other systems accessing this network drive will be running Windows, but also the odd Ubuntu and MacOS system as well. Are these objectives attainable? What type of RAID setup do you recommend? What hardware will be required? Also what OS do you think this system should be running? Does it really matter? I'm no network admin - just a long time Windoze user, without much Linux experience. That said, I'm not opposed to a Linux solution if it's easy enough and more practical than a Windows OS for this server. Or maybe something such as Openfiler. Budget should hit the sweet spot for value and performance (hence my preference to use 2TB drives). The biggest focus is storage; aside from that the system just needs to keep the drives running optimally with perhaps 2 or 3 clients accessing / writing files at any given time. The hardware quote would start with something like 10x 2TB WD Caviar Blacks; about $1900 for the storage + $x for remaining parts. http://ncix.com/products/index.php?sku=42775&vpn=WD2001FASS&manufacture=Western%20Digital%20WD Your advice is appreciated, thanks!

  Read the article

• ruby on rails gitorious setup on ubuntu

  - by dogmatic69

  Ive been trying to install gitorious for a while now which required ruby and rails etc. Ive finally got rails pages serving but cant finish the installation of gitorious because the gem version is too new. the error logs say please run 'rake ultrasphinx:configure' and that gives rake ultrasphinx:configure (in /var/www/apps/gitorious) rake aborted! uninitialized constant ActiveSupport::Dependencies::Mutex /var/www/apps/gitorious/Rakefile:10:in `require' (See full trace by running task with --trace) From searching google this is beacuse of the wrong gem verison. Cant find a way to down grade it. apparently sudo gem update --system 1.4.2 should do the trick but ubuntu 10.10 does not like this. ERROR: While executing gem ... (RuntimeError) gem update --system is disabled on Debian, because it will overwrite the content of the rubygems Debian package, and might break your Debian system in subtle ways. The Debian-supported way to update rubygems is through apt-get, using Debian official repositories. If you really know what you are doing, you can still update rubygems by setting the REALLY_GEM_UPDATE_SYSTEM environment variable, but please remember that this is completely unsupported by Debian. So i added export REALLY_GEM_UPDATE_SYSTEM=1 to .bashrc and reloaded it with . ~/.bashrc and still the same. ive tried various forms of setting this environmental variable with no luck. Ive also been told on #gitorious irc channel to add the file config/initializers/rubygems.rb with the line require "thread" to it. This has done nothing. EDIT: Just found another way which was rvm install rubygems 1.4.2 and it gave: Removing old Rubygems files... Installing rubygems dedicated to ruby-1.8.7-p334... Retrieving rubygems-1.4.2 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 288k 100 288k 0 0 282k 0 0:00:01 0:00:01 --:--:-- 414k Extracting rubygems-1.4.2 ... Installing rubygems for /home/ubuntu/.rvm/rubies/ruby-1.8.7-p334/bin/ruby ERROR: Error running 'GEM_PATH="/home/ubuntu/.rvm/gems/ruby-1.8.7-p334:/home/ubuntu/.rvm/gems/ruby-1.8.7-p334@global:/home/ubuntu/.rvm/gems/ruby-1.8.7-p334@global" GEM_HOME="/home/ubuntu/.rvm/gems/ruby-1.8.7-p334" "/home/ubuntu/.rvm/rubies/ruby-1.8.7-p334/bin/ruby" "/home/ubuntu/.rvm/src/rubygems-1.4.2/setup.rb"', please read /home/ubuntu/.rvm/log/ruby-1.8.7-p334/rubygems.install.log WARN: Installation of rubygems did not complete successfully. TL;DR please tell me how to downgrade rubygems on ubuntu 10.10 or upgrade gitorious to work with 1.6.2 gems

  Read the article

• What is the best practise to create MSI with some other child MSI as prerequisite?

  - by sankar

  Currently we are using Innosetup as a bootstrapper to install the MSI prerequisites. It makes bit complex to maintain the setup. I found that burn tool which may help us to resolve this issue by having a single setup to install whatever we need. I could not find either documentation or sample for this tool. Is anyone have idea about this? or you can give me the alternate solution if you have. Looking for the alternate soltuion for the actions that we do with ISS bootstrapper now: Extract the files (Main setup, Prerequisite setup) Need to ensure prerequisites status and install on demand. Start main install.

  Read the article

• how can I make pip/setuptools understand that my package is in ./src?

  - by Giacomo Lacava

  I have a library with a layout like this in Github: README setup.py src/ somelibrary.py Note: I cannot change the layout, but I can change setup.py. I want to be able to reference this library from requirements.txt, so that people can do pip install -r requirements.txt and have it installed automagically. So I add a line like this into requirements: -e git+http://blablabla/blabla#egg=somelibrary This will clone the repository under ./src/somelibrary and then run setup.py develop on it, which will just add a link to ./src/somelibrary under site-packages. Unfortunately, because the library is actually under ./src/somelibrary/src, it seems like python can't see the library correctly. What am I missing? I guess it must be a setup.py option I'm not using correctly.

  Read the article

• python distutils does not include data_files

  - by StackUnderflow

  I am new to distutils.. I am trying to include few data files along with the package.. here is my code.. from distutils.core import setup setup(name='Scrapper', version='1.0', description='Scrapper', packages=['app', 'db', 'model', 'util'], data_files=[('app', ['app/scrapper.db'])] ) The zip file created after executing python setup.py sdist does not include the scrapper.db file. I have scrapper.db file in the app directory.. thanks for the help.

  Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >