Search Results

Search found 11618 results on 465 pages for 'shared storage'.

Page 49/465 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

• Ubuntu 10.04 recognizing USB 2.0 external HD as USB 1.1

  - by btucker

  When I connect the USB 2.0 drive I see this: usb 1-4.3: new full speed USB device using ohci_hcd and address 5 so I know it's getting seen as USB 1.1. usb-devices shows that it really is USB 2.0 and connected to a USB 2.0 hub: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05e3 ProdID=0608 Rev=77.61 S: Product=USB2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=13fd ProdID=1340 Rev=02.10 S: Manufacturer=Generic S: Product=External C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage It seems the problem is that root hub is: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=02.06 S: Manufacturer=Linux 2.6.32-25-server ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub And there's no mention of ehci_hcd. lsusb -t gives me: /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/10p, 12M |__ Port 4: Dev 2, If 0, Class=hub, Driver=hub/4p, 12M |__ Port 2: Dev 4, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 3: Dev 5, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 6: Dev 3, If 0, Class=stor., Driver=usb-storage, 12M It seems like I'm missing something which would allow the OS to see USB 2.0 devices. Can anyone point me in the right direction? EDIT Full lsusb -v output: Bus 001 Device 005: ID 13fd:1340 Initio Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x13fd Initio Corporation idProduct 0x1340 bcdDevice 2.10 iManufacturer 1 Generic iProduct 2 External iSerial 3 57442D574341595930323337 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x05e3 Genesys Logic, Inc. idProduct 0x0608 USB-2.0 4-Port HUB bcdDevice 77.61 iManufacturer 0 iProduct 1 USB2.0 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x00e0 Ganged power switching Ganged overcurrent protection Port indicators bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0103 power enable connect Port 3: 0000.0103 power enable connect Port 4: 0000.0100 power Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.32-25-server ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:02.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 10 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0103 power enable connect Port 5: 0000.0100 power Port 6: 0000.0103 power enable connect Port 7: 0000.0100 power Port 8: 0000.0100 power Port 9: 0000.0100 power Port 10: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled

  Read the article

• GlusterFS as elastic file storage?

  - by Christopher Vanderlinden

  Is there any way to run GlusterFS in a replicated mode, but with the ability to dynamically scale the volume up and down? Say you have 3 servers all running glusterd. your Gluster volume would have to be setup with replica 3 gluster volume create test-volume replica 3 192.168.0.150:/test-volume 192.168.0.151:/test-volume 192.168.0.152:/test-volume You would then mount it as say \mnt\gfs_test What happens when I want to add 2 more servers to the storage pool and then also use them in this volume? Is there any easy way to expand the volume AND increase that replica count to 5? My end goal is to run this on EC2 instances, say 3 Apache front ends, with the webroot setup on the gluster volume mount. My concern is that if I ever need to spin up a server, I would want the server to not only be an additional Apache front end, but also another server in the gluster file system, adding to fault tolerance as well as possibly giving a slight boost in read speed. Maybe there are better options that would fit the bill here? Thanks.

  Read the article

• Need a recommendation for shared storage on auto-scaling ec2 w/ scalr

  - by john h.

  I have come across so many answers to this question that I am completely lost! I am moving our 2 sites to a load balanced ec2 system with scalr as our cloud manager. Now the question is coming up about persistent storage for the user's uploaded content and other files. Could someone please give me a suggestion and possible a link to a tutorial for the following setup and goals. 2 websites (1 Forum, 1 ecommerce). 1 LB 1 App server (to scale out to as many as needed) 1 DB server (to scale out to as many as needed) Our sites will need to autoscale and according to what I am learning about scalr, that means as new instances load up, I need to run a script to set the basics up on that server (git,php mods, pull site from git, move keys, etc) What I don't understand is how should I handle user uploaded content like profile pictures, avatars, product images, themes, etc... Do I mount an EBS or s3fs folder to hold the websites (maybe /var/www/websitefolder) or do I do something like mount the avatar folders /var/www/websitefolder/images/avatars) I am not sure where to go with this. Could someone give me some detailed help? -John

  Read the article

• Turn computer into DAS (Direct Attached Storage)

  - by Damon

  Can we build a direct attached storage by taking a computer/server, adding an HBA, and installing some appropriate software? We would use Debian as a host OS for both the DAS and the server. If so, what software do we use? And do we simply need a HBA for the DAS and the Server? Or do we need more hardware? The goal is to use an older server that does not have enough room for drives but does have ECC memory, server processors, redundant power supplies, dual nics, etc. Then find any boxes, server or not, the key being having enough room for 8-12 drives, fans, etc. and turning them into a DAS; build two of these DAS's and have them connected to the server. Eventually we want to have two servers using DRBD and associated services like heartbeat and pace maker to create an HA setup for our server(s) but that will take a long time to configure since I have no experience with anything related to DRBD (yet) and have a learning curve I have to get past, not to mention the additional cost of more hardware (two servers vs one).

  Read the article

• Need a place to store a few bytes of meta information on storage media

  - by Jason C

  I'm working on an embedded project. I need a place to store some filesystem-independent meta information on a storage device. The device has an MSDOS partition table. The device also may have unallocated space (depending on its size) but it will be TRIMmed (and also may be blown away by new partitions in the future). I need a location on the device that is not unallocated and that has a low risk of being touched (outside of completely erasing the device). The device is only guaranteed to have an MBR at the point the meta data needs to first be written; meaning there are no EBRs/VBRs present that I could use. There are 446 bytes at the very start of the device available for MBR bootstrap code. Currently my only idea is to store data at the end of this block. However, the device is bootable and I have no way of knowing if I'd be blowing away bootstrap code or not. The sector size is 512 bytes and the MBR is the first sector, I'm pretty sure (correct me if I'm wrong) that that means the second sector is available for use by partition data, so I can't use that either. Does anybody have any ideas? I need 4 bytes of space.

  Read the article

• Shared Files stuck locked even after closing all sessions

  - by Chris S

  We run a business app from a shared network drive (has to be this way). When I go to do updates it complains that files are locked. Generally there are open sessions from people who left their computer on, but with no locks on files; there aren't necessarily always sessions open when it complains about locked files. If I close these sessions they disappear. I say "disappear" because I suspect they're actually hanging open. If I try to restart the Server service, it hangs on stopping. Restarting the whole server (it's a VM) unlocks the files. The Server is a Windows 2008 R2 Ent VM running on Hyper-V; the share is accessed through DFS. Offline Files and caching are disabled (Share and GPO). All clients are Win7. Nothing has SP1 yet. Any ideas on what causes the file locks to hang? Any ideas for a solution other than rebooting the server every time?

  Read the article

• Industrial strength cloud file storage

  - by ArthurG

  I'm looking for an industrial strength cloud file storage system. It will be used by multiple people in a startup. Our requirements: Transparent file system access: files and folders in the file system must be able transparently access (read and write) files in the cloud; files must be synchronized whenever network access is available and buffered otherwise. The system must be usable by non-technical people. Access control: we need to control who can access which files, at least on a very coarse basis. e.g., the developers will be able to access the system design documents, only the corporate folks can access recruiting documents, and only management can access certain corporate documents. Dropbox provides this via Sharing folders, but that's not adequate, if I understand it correctly, because there's no authentication of the sharing user. so the cloud service should have a notion of an account (our startup) with multiple users with distinct credentials and rights for each user Clients: it must be accessible from Macs and PCs; I would hope that it supports Linux (e.g., Ubuntu) too Security: it must provide robust security Backup: the cloud service must reliably backup the files Versioning: change version history, is a big plus, but not required Not free: we're willing to pay for the service So far, we've reviewed the following, albeit not completely thoroughly: Dropbox: has all except 1) Access control, which is provided via Sharing folders, but that's not adequate, if I understand it correctly, because there's no authentication of the sharing user. and 2) Security, as discussed here http://www.economist.com/blogs/babbage/2011/05/internet_security and here http://blog.dropbox.com/?p=821. Windows Live Mesh, has all except 1) Clients, only supporting Windows 7 and OS X. SpiderOak has all, except 1) Transparent file system access, which is only available for 1 user. Amazon Cloud, doesn't offer 1) Transparent file system access Rackspace Cloud Drive has all except 1) Access control and 2) Versioning I'll gladly include any clarifications or additional systems the community provides. Arthur

  Read the article

• Can you force a crash if a write occurs to a given memory location with finer than page granularity?

  - by Joseph Garvin

  I'm writing a program that for performance reasons uses shared memory (alternatives have been evaluated, and they are not fast enough for my task, so suggestions to not use it will be downvoted). In the shared memory region I am writing many structs of a fixed size. There is one program responsible for writing the structs into shared memory, and many clients that read from it. However, there is one member of each struct that clients need to write to (a reference count, which they will update atomically). All of the other members should be read only to the clients. Because clients need to change that one member, they can't map the shared memory region as read only. But they shouldn't be tinkering with the other members either, and since these programs are written in C++, memory corruption is possible. Ideally, it should be as difficult as possible for one client to crash another. I'm only worried about buggy clients, not malicious ones, so imperfect solutions are allowed. I can try to stop clients from overwriting by declaring the members in the header they use as const, but that won't prevent memory corruption (buffer overflows, bad casts, etc.) from overwriting. I can insert canaries, but then I have to constantly pay the cost of checking them. Instead of storing the reference count member directly, I could store a pointer to the actual data in a separate mapped write only page, while keeping the structs in read only mapped pages. This will work, the OS will force my application to crash if I try to write to the pointed to data, but indirect storage can be undesirable when trying to write lock free algorithms, because needing to follow another level of indirection can change whether something can be done atomically. Is there any way to mark smaller areas of memory such that writing them will cause your app to blow up? Some platforms have hardware watchpoints, and maybe I could activate one of those with inline assembly, but I'd be limited to only 4 at a time on 32-bit x86 and each one could only cover part of the struct because they're limited to 4 bytes. It'd also make my program painful to debug ;)

  Read the article

• How to pass parameters to manage_shared_memory.construct() in Boost.Interprocess

  - by recipriversexclusion

  I've stared at the Boost.Interprocess documentation for hours but still haven't been able to figure this out. In the doc, they have an example of creating a vector in shared memory like so: //Define an STL compatible allocator of ints that allocates from the managed_shared_memory. //This allocator will allow placing containers in the segment typedef allocator<int, managed_shared_memory::segment_manager> ShmemAllocator; //Alias a vector that uses the previous STL-like allocator so that allocates //its values from the segment typedef vector<int, ShmemAllocator> MyVector; int main(int argc, char *argv[]) { //Create a new segment with given name and size managed_shared_memory segment(create_only, "MySharedMemory", 65536); //Initialize shared memory STL-compatible allocator const ShmemAllocator alloc_inst (segment.get_segment_manager()); //Construct a vector named "MyVector" in shared memory with argument alloc_inst MyVector *myvector = segment.construct<MyVector>("MyVector")(alloc_inst); Now, I understand this. What I'm stuck is how to pass a second parameter to segment.construct() to specify the number of elements. The interprocess document gives the prototype for construct() as MyType *ptr = managed_memory_segment.construct<MyType>("Name") (par1, par2...); but when I try MyVector *myvector = segment.construct<MyVector>("MyVector")(100, alloc_inst); I get compilation errors. My questions are: Who actually gets passed the parameters par1, par2 from segment.construct, the constructor of the object, e.g. vector? My understanding is that the template allocator parameter is being passed. Is that correct? How can I add another parameter, in addition to alloc_inst that is required by the constructor of the object being created in shared memory? There's very little information other than the terse Boost docs on this.

  Read the article

• `:Zone.Identifier` files keep on appearing in Windows XP virtual machine

  - by Jonathan Reno

  I have a Windows XP Home Edition guest and a Linux Mint 13 host. I use VirtualBox and the ~/Public directory is shared with the guest. It sometimes happens that I use IE on the guest system to download files (until I get a better Windows browser). All of the downloaded files go the the L:\ drive (the ~/Public directory). When they are finished downloading, Windows Explorer adds a :Zone.Identifier file for each file I download. When I extract a downloaded ZIP archive on the guest (on drive L:\), Windows creates a :Zone.Identifier file for every file in the extracted directory. This even occurs if I use the host to move a file to the ~/Public directory. The shared ~/Public directory is on an ext4 partition and the colon character is supposed to be illegal in file names in Windows, but not on the ext4 partition. Is there any way to stop Windows from putting all this rubbish on my filesystem? (I might have to create a shell script to clean up after Windows' act.) Here is what I see in Windows Explorer: By the way, if I were running a Mac OS X host (where colons are illegal file name characters) this would be even more horrendous.

  Read the article

• Why do hosts prefer Linux to Windows Server?

  - by iconiK

  So far I see a HUGE majority of hosts provide only Linux shared hosting, providing Windows only to VPS (or even to only dedicated servers). Why is it so? While Windows is a lot more expensive than Linux (though it depends on a lot of factors, not just initial and support license cost), it also provides ASP.NET, IIS and of course, Microsoft SQL Server. I know in the past it might have been because of cPanel being Linux only but now they have a Windows version. But still, why is Linux predominantly used on shared hosting? PHP works on both systems. IIS can be (and probably is) faster. MySQL runs on both systems as well. cPanel has a Windows version. Python, Perl, Ruby, all run on Windows as well. You even have MS SQL Server Express, which I find more superior than MySQL in both speed and features. Access is there for low usage requirements, as is SQLite (which is so great for quick small stuff). And with PowerShell you have a good alternative to the Unix shell. EDIT: I am looking for common reasons, I realize each hosting company (and/or it's clients) may have different needs. This becomes very important when you get to VPS or Cloud which give you a full operating system to use.

  Read the article

• Can a website company that builds 4-5 websites a year afford dedicated hosting?

  - by Petras

  We manage about 30 websites that use shared ASP.NET SQL Server web hosting. These are typical small/medium business websites and they perform fine in this environment. Recently I was looking at VPS hosting in this thread http://serverfault.com/questions/128329/how-do-you-host-multiple-public-facing-websites-on-a-vps After contacting a provider in one of the replies I was told that VPS hosting is not recommended for 30 sites, even if they are small. The resource requirements might be too great even for VPS. So I should turn to dedicated hosting. The lowest cost dedicated hosting is $219 per month (see http://www.serverintellect.com/dedicated/pentiumdservers.aspx). But this is only for a single processor which seems too light for a machine running both IIS and SQL. In our office all the developers work on quad cores so I assume I’d really need the Quad Processor. However, this starts at $599 monthly. Now, I won’t be able to transfer all of our 30 sites to this machine. I’d only be able to transfer say 5 or 6. However, moving forward, I’d be able to host all future sites on this machine. This amounts to 4-5 per year. Let’s look at the economics. Shared hosting costs are typically $16.95 monthly (see http://www.crystaltech.com/dotnet.aspx). So here’s the dilemma First months costs: $599 First month revenue: 6x$16.95 = $101.7 Loss in first month: $497.3 First year costs: $599x12=$7188 First month revenue: 6x$16.95x12 + 5x$16.95x6(averaged) = $1728.9 Loss in first year: $5459.1 Clearly it is going to take years for this server to pay for itself. It just doesn’t seem economical! Am I missing something here, or is dedicated not the way to go with the amount of sites we build?

  Read the article

• sharing a USB printer in SOHO environment [migrated]

  - by Registered User

  Here is a situation I am facing, there is USB printer which works only on a Windows XP machine, there are other devices in LAN it is a Small Office Home Office environment. How can this USB printer attached to Windows XP machine be shared so that other laptops or users in Network who have Windows 7 or Linux on their laptops can use this printer. The printer model number is Canon Laser Shot LBP-1210 http://www.canon-europe.com/For_Home/Product_Finder/Printers/Laser/LaserShot_LBP1210/index.asp a print server is not available to me I need to make it work in this situation only.What can I do? the clients are unable to connect to this.It is not a network or TCP/IP printer If a from Windows 7 machine some one wants to use this printer so that he can take a print he gets an error while adding the printer to his machine which is a Windows 7 machine (where as the printer is USB printer on Windows XP machine) Start--->Devices and Printers---> Add Printer---> Find Printer by name or IP address--->Selected a shared printer by name-->\\PC-Name-printer3 and select browse it gives a message Windows can not find a driver for Canon LASER SHOT LBP-1210 on the network what does this mean do I need to install some kind of software at client machine or on the machine where printer is present?

  Read the article

• Mounting an Azure blob container in a Linux VM Role

  - by djechelon

  I previously asked a question about this topic but now I prefer to rewrite it from scratch because I was very confused back then. I currently have a Linux XS VM Role in Azure. I basically want to create a self-managed and evoluted hosting service using VMs rather than Azure's more-expensive Web Roles. I also want to take advantage of load balancing (between VM Roles) and geo-replication (of Storage Roles), making sure that the "web files" of customers are located in a defined and manageable place. One way I found to "mount" a drive in Linux VM is described here and involves mounting a VHD onto the virtual machine. From what I could learn, the VHD is reliably-stored in a storage role, and is exclusively locked by the VM that uses it. Once the VM Role has its drive I can format the partition to any size I want. I don't want that!! I would like each hosted site to have its own blob directory, then each replicated/load-balanced VM Role to rw mount like in NFS that blob directory to read HTML and script files. The database is obviously courtesy of Microsoft :) My question is Is it possible to actually mount a blob storage into a directory in the Linux FS? Is it possible in Windows Server 2008?

  Read the article

• Understanding Linux SCSI queue depths

  - by Troels Arvin

  I'm experimenting with the effects of different SCSI queue depth values on a Dell server running CentOS Linux 5.4 (x86_64). The server has two QLogic QLE2560 FC HBAs connected via multipathing to a storage system. The storage system has allocated two LUNs to the server, each connected through four paths in an active-active-active-active round-robin configuration. All in all, the two LUNs exist as eight /dev/sdX devices, represented by two devices in /dev/mpath. I currently adjust the queue depth values in /etc/modprobe.conf and check the result (after rebooting) by looking in the seventh column of /proc/scsi/sg/devices. Two questions related to that: Is there a way to adjust queue depths without rebooting or unloading the qla2xxx kernel module? E.g., can I echo a new queue depth value into some /proc or /sys-like file to update the queue depth? If I set the queue depth to 128, is that 128 in total for all devices handled by the qla2xxx module?, or 128 for each HBA? (256 in total), or 128 for each of the eight /dev/sdX devices (1024 in toal)?, or 128 for each of the two /dev/mpath/... devices (256 in total)? This is important for me to know so that my server doesn't flood the storage system, affecting other servers connected to it.

  Read the article

• Probability of Blade Chassis Failure

  - by ChrisZZ

  In my organisation we are thinking about buying blade servers - instead of rack servers. Of course technology vendors also make them sound very nice. A concern, that I read very often in different forums, is, that there is a theoretical possibility of the server chassis going down - which would in consequence take all the blades down. That is due to shared infrastructure. My reaction on this probability would be to have redundancy and by two chassis instead of one (very costly of course). Some people (including e.g. HP Vendors) try to convince us, that the chassis is very very unlikely to fail, due to many redundancies (redundant power supply, etc.). Another concern on my side is, that if something goes down, spare parts might be required - which is difficult in our location (Ethiopia). So I would ask to experienced administrators, that have managed blade server: What is your experience? Do they go down as a whole - and what is the sensible shared infrastructure, that might fail? That question could be extended to shared storage. Again I would say, that we need two storage units instead of only one - and again the vendors say, that this things are so rock solid, that no failure is expected. Well - I can hardly believe, that such a critical infrastructure can be very reliable without redundancy - but maybe you can tell me, whether you have successfull blade-based projects, that work without redundancy in its core parts (chassis, storage...) At the moment, we look at HP - as IBM looks much to expensive... thanks a lot best regards Christian

  Read the article

• Linux - real-world hardware RAID controller tuning (scsi and cciss)

  - by ewwhite

  Most of the Linux systems I manage feature hardware RAID controllers (mostly HP Smart Array). They're all running RHEL or CentOS. I'm looking for real-world tunables to help optimize performance for setups that incorporate hardware RAID controllers with SAS disks (Smart Array, Perc, LSI, etc.) and battery-backed or flash-backed cache. Assume RAID 1+0 and multiple spindles (4+ disks). I spend a considerable amount of time tuning Linux network settings for low-latency and financial trading applications. But many of those options are well-documented (changing send/receive buffers, modifying TCP window settings, etc.). What are engineers doing on the storage side? Historically, I've made changes to the I/O scheduling elevator, recently opting for the deadline and noop schedulers to improve performance within my applications. As RHEL versions have progressed, I've also noticed that the compiled-in defaults for SCSI and CCISS block devices have changed as well. This has had an impact on the recommended storage subsystem settings over time. However, it's been awhile since I've seen any clear recommendations. And I know that the OS defaults aren't optimal. For example, it seems that the default read-ahead buffer of 128kb is extremely small for a deployment on server-class hardware. The following articles explore the performance impact of changing read-ahead cache and nr_requests values on the block queues. http://zackreed.me/articles/54-hp-smart-array-p410-controller-tuning http://www.overclock.net/t/515068/tuning-a-hp-smart-array-p400-with-linux-why-tuning-really-matters http://yoshinorimatsunobu.blogspot.com/2009/04/linux-io-scheduler-queue-size-and.html For example, these are suggested changes for an HP Smart Array RAID controller: echo "noop" > /sys/block/cciss\!c0d0/queue/scheduler blockdev --setra 65536 /dev/cciss/c0d0 echo 512 > /sys/block/cciss\!c0d0/queue/nr_requests echo 2048 > /sys/block/cciss\!c0d0/queue/read_ahead_kb What else can be reliably tuned to improve storage performance? I'm specifically looking for sysctl and sysfs options in production scenarios.

  Read the article

• Windows 2003 Storage Server Hanging on Large File Transfers

  - by user25272

  In one of our offices we have a Dell PowerVault 745N NAS device which acts as the main file server. Its running 32bit Windows 2003 Storage Server SP2 with 3GB RAM. The server holds around 60 users HOME folders, which are mapped via AD. The office clients are a mix of XP SP3, Vista and Windows 7. Occasionally the server will completely hang when transferring large files. When the hang happens the console becomes unresponsive with only the mouse active and blank wallpaper. Sometimes stopping the copy frees the server, sometimes not. The hanging can last around 20 minutes. During this time other servers also become unresponsive with blank wallpaper at the console. If you do manage to get onto another server the taskbar and run commands are unresponsive. This also transcends to the client computers sometimes with explorer crashing. I'm guessing this is due to the HOME folder mapping. Eventually the NAS server with free up and everything will be back to normal. The server is configured as follows: PERC 4/DC DATA 2 - 12 SCSI HDD - RAID5 SHADOWCOPY 2 SCSI HDD - RAID1 CERC SATA DATA 11 4 SATA HDD - RAID5 OS 4 SATA HDD - RAID5 All the drivers and firmware is up to date. I've been through all the diagnostics with Dell and the hardware has come up clean including full HDD tests on the arrays. The server has NOD32 installed as the AV, but the hanging happens when it is uninstalled. There are no errors in the event log when this happens and we don't have any errors logged on any of our ProCurve switches. DNS is fine on the domain and AD from what I can tell is running happily. There are no DFS or NFS shares setup either. All the shares are standard Windows. I've unchecked the allow the computer to turn off this device to save power box under Power Management on the NIC. "Set Link Speed and Duplex to Auto-negotiate 1000 " Increased Receive Descriptors buffer from 256 to 352 (reserves more CPU resource for handling data) I've run network traces using network monitor and have found the following: 417 8.078125 {SMB:192, NbtSS:25, TCP:24, IPv4:23} 192.168.2.244 192.168.5.35 SMB SMB:R; Nt Create Andx - NT Status: System - Error, Code = (52) STATUS_OBJECT_NAME_NOT_FOUND I've tried different cabling; NICs and switch ports all with the same result. Transferring files from other servers on the domain is fine. All I haven't done is run CHKDSK on the drives to look for any file system errors. On the Vista clients I have also run netsh interface tcp set global autotuning=disabled with no result. Could it be that the server has a faulty drive or that the I/O is too much for it to handle? Any ideas why would the hang cause issues with the other servers on the LAN? Many Thanks.

  Read the article

• Script to check a shared Exchange calendar and then email detail

  - by SJN

  We're running Server and Exchange 2003 here. There's a shared calendar which HR keep up-to-date detailing staff who are on leave. I'm looking for a VB Script (or alternate) which will extract the "appointment" titles of each item for the current day and then email the detail to a mail group, in doing so notifying the group with regard to which staff are on leave for the day. The resulting email body should be: Staff on leave today: Mike Davis James Stead @Paul Robichaux - ADO is the way I went for this in the end, here are the key component for those interested: Dim Rs, Conn, Url, Username, Password, Recipient Set Rs = CreateObject("ADODB.Recordset") Set Conn = CreateObject("ADODB.Connection") 'Configurable variables Username = "Domain\username" ' AD domain\username Password = "password" ' AD password Url = "file://./backofficestorage/domain.com/MBX/username/Calendar" 'path to user's mailbox and folder Recipient = "[email protected]" Conn.Provider = "ExOLEDB.DataSource" Conn.Open Url, Username, Password Set Rs.ActiveConnection = Conn Rs.Source = "SELECT ""DAV:href"", " & _ " ""urn:schemas:httpmail:subject"", " & _ " ""urn:schemas:calendar:dtstart"", " & _ " ""urn:schemas:calendar:dtend"" " & _ "FROM scope('shallow traversal of """"') " Rs.Open Rs.MoveFirst strOutput = "" Do Until Rs.EOF If DateDiff("s", Rs.Fields("urn:schemas:calendar:dtstart"), date) >= 0 And DateDiff("s", Rs.Fields("urn:schemas:calendar:dtend"), date) < 0 Then strOutput = strOutput & "<p><font size='2' color='black' face='verdana'><b>" & Rs.Fields("urn:schemas:httpmail:subject") & "</b><br />" & vbCrLf strOutput = strOutput & "<b>From: </b>" & Rs.Fields("urn:schemas:calendar:dtstart") & vbCrLf strOutput = strOutput & "&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<b>To: </b>" & Rs.Fields("urn:schemas:calendar:dtend") & "<br /><br />" & vbCrLf End If Rs.MoveNext Loop Conn.Close Set Conn = Nothing Set Rec = Nothing After that, you can do what you like with srtOutput, I happened to use CDO to send an email: Set objMessage = CreateObject("CDO.Message") objMessage.Subject = "Subject" objMessage.From = "[email protected]" objMessage.To = Recipient objMessage.HTMLBody = strOutput objMessage.Send S

  Read the article

• Boost interprocess cached pools

  - by porgarmingduod

  I'm trying to figure out if my reading of the docs for boost interprocess allocators is correct. When using cached_adaptive_pool to allocate memory: typedef cached_adaptive_pool<int, managed_shared_memory::segment_manager> pool_allocator_t; pool_allocator_t pool_allocator(segment.get_segment_manager()); // Allocate an integer in the shared memory segment pool_allocator_t::pointer pool_allocator.allocate_one(); My understanding is that with multiple processes one can allocate and deallocate freely: That is, if I have a cached pool allocator for integers in one process, then it can deallocate integers allocated by similar pools in other processes (provided, of course, that they are working on the same shared memory segment). It may be a stupid question, but working with multiple processes and shared memory is hard enough, so I'd like to know 100% whether I got the basics right.

  Read the article

• Using Session State in Public Class in ASP.NET?

  - by davemackey

  I'm trying to move some reusable portions of code into a class. This is working okay except when I attempt to use Session within this class. I get an error: "Cannot refer to an instance member of a class from within a shared method or shared member initializer without an explicit instance of the class." My code looks something like this: Public Class webHousing Inherits System.Web.UI.Page Public Sub GetUserInfo() Dim x as String x = 10 Session("x")= x End Sub End Class I've simplified this code significantly - but the basic problem is present - trying to set a session value from within a class. I found the following MSDN article1 but don't believe Public/Shared can be used on Session?

  Read the article

• Phantom activity on MySQL

  - by LoveMeSomeCode

  This is probably just my total lack of MySQL expertise, but is it typical to see lots of phantom activity on a MySQL instance via phpMyAdmin? I have a shared hosting plan through Lithium, and when I log in through the phpMyAdmin console and click on the 'Status' tab, it's showing crazy high numbers for queries. Within an hour of activating my account I had 1 million queries. At first I thought this was them setting things up, but the number is climbing constantly, averaging 170/second. I've got a support ticket in with Lithium, but I thought I'd ask here if this were a MySQL/shared host thing, because I had the same thing happen with a shared hosting plan through Joyent.

  Read the article

• How to create make .so files from code written in c or c++ that are usable from python

  - by None

  Looking at python modules and at code in the "lib-dnyload" directory in the python framework, I noticed whenever code is creating some kind of gui or graphic it imports a non-python file with a .so extension. And there are tons .so files in "lib-dnyload". From googling things I found that these files are called shared objects and are written in c or c++. I have a mac and I use gcc. I want to know how to make shared object files that are accessible via python. Mainly just how to make shared objects with gcc using mac os x.

  Read the article

• JBoss Seam - Quartz - single Quartz instance shared between 2 web applications

  - by Walter White

  Hi all, Is it possible to have a single Quartz scheduler using its own datasource that can be shared between web applications? Thanks, Walter

  Read the article

• Create a sub menu in existing menu in Excel Shared Add-in

  - by Sathish

  Hi I am developing a Excel shared Add-in which has the menu called Custom which is created using Excel Macros. Now i want to create a submenu under the Custom menu using Csharp Shared Add -in. Iam using the below code for doing this but no help oStandardBar = oCommandBars["Custom"]; oCmdBarCtrl = oStandardBar.Controls.Add(MsoControlType.msoControlPopup, Type.Missing, Type.Missing, Type.Missing, true); oCmdBarCtrl.Visible = false; oCmdBarCtrl.Caption = "Sub Menu1"; But it does not create a submenu, where as if i give "Help" in place of Custom i get the menu created. any work around for this?

  Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >