Search Results

Search found 2053 results on 83 pages for 'signal'.

Page 49/83 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

• Why is wireless slow with Atheros AR9285?

  - by Luke

  I know there are many posts like this, however none of the fixes I have found have worked. I had the issue on 11.04, and after having no luck fixing it decided to try 12.04 however this has not fixed the problem. I'm using a Lenovo IdeaPad, the network card is a Atheros Communications AR9285. edit add outputs: sudo iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"NETGEAR-PLOW" Mode:Managed Frequency:2.437 GHz Access Point: E0:91:F5:7D:1B:BA Bit Rate=65 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=66/70 Signal level=-44 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:77 Invalid misc:63 Missed beacon:0 eth0 no wireless extensions. lspci -nnk | grep -iA2 net 06:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Lenovo Device [17aa:30a1] Kernel driver in use: ath9k -- 07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02) Subsystem: Lenovo Device [17aa:392e] Kernel driver in use: r8169 Thanks

  Read the article

• MPlayer does not work

  - by Soham Pal

  Using the xubuntu desktop, on Ubuntu Raring updated from Quantal. MPlayer never really worked. No video, no audio, nothing. I really can't be any more helpful, so here's the log: petey@home-pc:~$ mplayer "/home/petey/Downloads/Polar Bear Cafe (480p)HorribleSubs]/[HorribleSubs] Polar Bear Cafe - 01 [480p].mkv" MPlayer SVN-r35984-4.7 (C) 2000-2013 MPlayer Team Playing /home/petey/Downloads/Polar Bear Cafe (480p)[HorribleSubs]/[HorribleSubs] Polar Bear Cafe - 01 [480p].mkv. libavformat version 55.0.100 (internal) libavformat file format detected. [lavf] stream 0: video (h264), -vid 0 [lavf] stream 1: audio (aac), -aid 0 [lavf] stream 2: subtitle (ass), -sid 0 VIDEO: [H264] 848x480 0bpp 23.810 fps 0.0 kbps ( 0.0 kbyte/s) Clip info: creation_time: 2012-04-05 21:36:10 Load subtitles in /home/petey/Downloads/Polar Bear Cafe (480p)[HorribleSubs]/ Can't open /dev/fb0: Permission denied [fbdev2] Can't open /dev/fb0: Permission denied VO: [v4l2] No such file or directory vo_cvidix: No vidix driver name provided, probing available ones (-v option for details)! [cyberblade] Error occurred during pci scan: Operation not permitted [mach64] Error occurred during pci scan: Operation not permitted [mga] Error occurred during pci scan: Operation not permitted [mga] Error occurred during pci scan: Operation not permitted [nvidia_vid] Error occurred during pci scan: Operation not permitted [pm3] Error occurred during pci scan: Operation not permitted [radeon] Error occurred during pci scan: Operation not permitted [rage128] Error occurred during pci scan: Operation not permitted [s3_vid] Error occurred during pci scan: Operation not permitted [SiS] Error occurred during pci scan: Operation not permitted [unichrome] Error occurred during pci scan: Operation not permitted [VO_SUB_VIDIX] Couldn't find working VIDIX driver. ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family libavcodec version 55.0.100 (internal) Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264) ========================================================================== ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 44100 Hz, 2 ch, floatle, 0.0 kbit/0.00% (ratio: 0->352800) Selected audio codec: [ffaac] afm: ffmpeg (FFmpeg AAC (MPEG-2/MPEG-4 Audio)) ========================================================================== [AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or directory DVB card number must be between 1 and 4 AO: [null] 44100Hz 2ch floatle (4 bytes per sample) Starting playback... Movie-Aspect is 1.78:1 - prescaling to correct movie aspect. VO: [null] 848x480 = 854x480 Planar YV12 A: 4.7 V: 4.7 A-V: 0.002 ct: 0.083 0/ 0 22% 0% 0.5% 0 0 MPlayer interrupted by signal 2 in module: sleep_timer A: 4.7 V: 4.7 A-V: 0.001 ct: 0.083 0/ 0 21% 0% 0.5% 0 0 Exiting... (Quit)

  Read the article

• Update

  - by Jeff Certain

  This blog has been pretty quiet for a year now. There's a few reasons for that. Probably the biggest reason is that I view this as a space where I talk about .NET things. Or software development. While I've been doing the latter for the past year, I haven't been doing the former.Yes, I took a trip to the dark side. I started with Ning 11 months ago, in Palo Alto, CA. I had the chance to work with an incredibly talented group of software engineers... in PHP and Java.That was definitely an eye-opening experience, in terms of technology, process, and culture. It was also a pretty good example of how acquisitions can get interesting. I'll talk more about this, I'm sure.Last week, I started with a company called Dynamic Signal. I'm a "Back End Engineer" now. Also a very talented team of people, and I'm delighted to be working with them. We're a Microsoft shop. After a year away, I'm very happy to be back. Coming back to .NET is an easy transition, and one that has me being fairly productive straight out of the gate.(Some of you may have noticed, my last post was more than a year ago. Yes, it's safe to infer that I didn't get renewed as an MVP. Fair deal; I didn't do nearly as much this year as I have in the past. I'll be starting to speak again shortly, and hope to be re-awarded soon.)At any rate, now that I'm back in the .NET space, you can expect to hear more from me soon!

  Read the article

• How do I install the EW-7318Ug wireless drivers?

  - by user69731

  I'm on Ubuntu 12.04 and I need to install & configure Internet connection. I want to use montor mode in Wireshark. After Ubuntu installation my wireless card was recognized but it doesn't connect to the Internet. Internal wireless card works well. What should I do? I'm new to Linux. PC:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr 64:31:50:0f:d4:70 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:45 Base address:0x8000 eth1 Link encap:Ethernet HWaddr e0:2a:82:aa:2d:3e inet addr:192.168.0.101 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::e22a:82ff:feaa:2d3e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:20978 errors:0 dropped:0 overruns:0 frame:364651 TX packets:20949 errors:171 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:19299119 (19.2 MB) TX bytes:3024858 (3.0 MB) Interrupt:19 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4788 errors:0 dropped:0 overruns:0 frame:0 TX packets:4788 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:387017 (387.0 KB) TX bytes:387017 (387.0 KB) wlan1 Link encap:Ethernet HWaddr 00:1f:1f:44:c1:a4 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:10508 errors:0 dropped:0 overruns:0 frame:0 TX packets:6143 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14831319 (14.8 MB) TX bytes:644606 (644.6 KB) PC:~$ iwconfig lo no wireless extensions. wlan1 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:225 Noise level:162 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions.

  Read the article

• How do I get a Belkin F5D8053 wireless adapter working?

  - by disassembler

  I've tried getting my Belkin N Wireless adapter to work on Ubuntu many times with no luck at all. Each time I seem to arrive at a dead end. After some thorough searching of UbuntuForums and WifiDocs I've gathered some information and narrowed the problem down to an issue with the rtl819xU driver. Here's some info that may help: $ sudo lshw -C network *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan0 serial: 00:22:75:38:52:ac capabilities: ethernet physical wireless configuration: broadcast=yes driver=rtl819xU multicast=yes wireless=802.11b/g/n $ sudo lsmod Module Size Used by vesafb 13449 1 snd_ice1724 106559 2 snd_ice17xx_ak4xxx 13163 1 snd_ice1724 snd_ac97_codec 105614 1 snd_ice1724 ac97_bus 12642 1 snd_ac97_codec snd_ak4xxx_adda 18436 2 snd_ice1724,snd_ice17xx_ak4xxx snd_ak4114 14326 1 snd_ice1724 snd_pt2258 12986 1 snd_ice1724 snd_i2c 13831 2 snd_ice1724,snd_pt2258 snd_ak4113 14307 1 snd_ice1724 snd_pcm 80244 4 snd_ice1724,snd_ac97_codec,snd_ak4114,snd_ak4113 fglrx 2434640 121 snd_seq_midi 13132 0 snd_rawmidi 25269 2 snd_ice1724,snd_seq_midi binfmt_misc 13213 1 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51291 2 snd_seq_midi,snd_seq_midi_event ppdev 12849 0 snd_timer 28659 2 snd_pcm,snd_seq snd_seq_device 14110 3 snd_seq_midi,snd_rawmidi,snd_seq dcdbas 14054 0 r8192u_usb 297246 0 snd 55295 16 snd_ice1724,snd_ac97_codec,snd_ak4xxx_adda,snd_ak4114,snd_pt2258,snd_i2c,snd_ak4113,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 12600 1 snd parport_pc 32111 1 snd_page_alloc 14073 1 snd_pcm shpchp 32345 0 lp 13349 0 parport 36746 3 ppdev,parport_pc,lp usbhid 41704 0 hid 77084 1 usbhid e100 40108 0 floppy 60032 0 $ sudo iwconfig wlan0 802.11b/g/n Mode:Managed Access Point: Not-Associated Bit Rate:1 Mb/s Retry min limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/100 Signal level=0 dBm Noise level=0 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I'd like to know if 1) Is the driver is properly installed and recognized by Ubuntu? 2) What can I do to load the drivers properly and make use of the adapter? Thanks!

  Read the article

• /lib/i386-linux-gnu/libc.so.6 causing segmentation fault & session crash

  - by Fred Zimmerman

  I am having repeated and frequent crashes ending session whenever I take certain actions such as loading gmail under Chrome. Oddly, the same is not happening when I go to gmail under Chrome. After rooting around in /var/logs it appears to me that he trigger is something to do with libc.so.6 (see below). How can I fix this? 23936.947] [ 23936.947] Backtrace: [ 23936.948] 0: /usr/bin/X (xorg_backtrace+0x49) [0xb7745089] [ 23936.948] 1: /usr/bin/X (0xb75bf000+0x189d7a) [0xb7748d7a] [ 23936.948] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb759c40c] [ 23936.948] 3: /usr/bin/X (0xb75bf000+0xfade7) [0xb76b9de7] [ 23936.948] 4: /usr/bin/X (ValidatePicture+0x1d) [0xb76bcb8d] [ 23936.949] 5: /usr/bin/X (CompositePicture+0xc3) [0xb76bcc83] [ 23936.949] 6: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb6f18000+0xcf542) [0xb6fe7542] [ 23936.949] 7: /usr/bin/X (0xb75bf000+0x10b1d7) [0xb76ca1d7] [ 23936.949] 8: /usr/bin/X (CompositeGlyphs+0xc4) [0xb76b6d84] [ 23936.949] 9: /usr/bin/X (0xb75bf000+0x104956) [0xb76c3956] [ 23936.949] 10: /usr/bin/X (0xb75bf000+0xfe6f1) [0xb76bd6f1] [ 23936.949] 11: /usr/bin/X (0xb75bf000+0x3798d) [0xb75f698d] [ 23936.949] 12: /usr/bin/X (0xb75bf000+0x253ba) [0xb75e43ba] **[ 23936.950] 13: /lib/i386-linux-gnu/libc.so.6 (__libc_start_main+0xf3) [0xb721d4d3] [ 23936.950] 14: /usr/bin/X (0xb75bf000+0x256f9) [0xb75e46f9] [ 23936.950] [ 23936.950] Segmentation fault at address 0x155 [ 23936.950] Caught signal 11 (Segmentation fault). Server aborting [ 23936.950] Please consult the The X.Org Fou**ndation support at http://wiki.x.org for help. [ 23936.950] Please also check the log file at "/var/log/Xorg.0.log" for additional information.

  Read the article

• Upcoming EBS Webcasts for June, July, August 2012

  - by user793553

  See the following upcoming webcasts for June, July and August 2012. Flag Doc ID 740966.1 as a favourite, to keep up to date with latest advisor schedule. Additionally, see Doc ID 740964.1 for access to all archived advisor webcasts Oracle E-Business Suite Oracle E-Business Suite Title Date Summary None at this time.     EBS Agile Title Date Summary None at this time.     EBS Applications Technologies Group (ATG) Title Date Summary EBS – OAM Tuning and Monitoring EMEA July 10, 2012 Abstract EBS – OAM Tuning and Monitoring US July 11, 2012 Abstract Workflow Analyzer Followup EMEA July 24, 2012 Abstract Workflow Analyzer Followup US July 25, 2012 Abstract EBS CRM & Industries Title Date Summary None at this time.     EBS Financials Title Date Summary EBS Fixed Assets: Achieve Success Using Proactive Tools For Fixed Assets Support July 10, 2012 Abstract Overview and Flow of Oracle Project Resource Management July 17, 2012 Abstract Leveraging My Oracle Support To Increase Knowledge July 30, 2012 Abstract EBS HCM (HRMS) Title Date Summary Oracle Time and Labor (OTL) Rollback Functionality Session 1 July 25, 2012 Abstract Oracle Time and Labor (OTL) Rollback Functionality Session 2 July 25, 2012 Abstract EBS Manufacturing Title Date Summary Using Personalization in Oracle eAM June 21, 2012 Abstract OM Guided Resolutions - Finding Known Resolutions Easily July 17, 2012 Abstract Material Move Orders Flow July 25, 2012 Abstract Diagnosing Signal 11 Issues In ASCP Planning August 9, 2012 Abstract Interface Trip Stop - Best Practices and Debugging August 21, 2012 Abstract EBS Procurement Title Date Summary Punchout in iProcurement June 26, 2012 Abstract

  Read the article

• USB device changes using udev and D-Bus

  - by kicsyromy

  I am trying to get a list of currently plugged in USB devices in Ubuntu 10.10 and monitor changes that happen, like devices being plugged in or out using udev and D-Bus. I'm fairly new to programming using D-Bus. I saw one example: "Linux: How to detect is usb keyboard is plugged and unplugged". Problem is that it uses HAL and I know that HAL is deprecated. I found some working code, but it's working only with storage devices such as USB sticks, media players or CD-ROM drives. I want the whole thing: mice, keyboards, USB cameras, chargers; anything that is plugged in to the USB. How can I listen D-Bus events for any USB device plug and unplug? This is basically what I have now (also): import dbus import gobject from dbus.mainloop.glib import DBusGMainLoop def device_added_callback(device): print 'Device %s was added' % (device) def device_changed_callback(device): print 'Device %s was changed' % (device) #must be done before connecting to DBus DBusGMainLoop(set_as_default=True) bus = dbus.SystemBus() proxy = bus.get_object("org.freedesktop.UDisks", "/org/freedesktop/UDisks") iface = dbus.Interface(proxy, "org.freedesktop.UDisks.Device") devices = iface.get_dbus_method('EnumerateDevices')() print '%s' % (devices) #addes two signal listeners iface.connect_to_signal('DeviceAdded', device_added_callback) iface.connect_to_signal('DeviceChanged', device_changed_callback) #start the main loop mainloop = gobject.MainLoop() mainloop.run()

  Read the article

• What data should be cached in a multiplayer server, relative to AI and players?

  - by DevilWithin

  In a virtual place, fully network driven, with an arbitrary number of players and an arbitrary number of enemies, what data should be cached in the server memory, in order to optimize smooth AI simulation? Trying to explain, lets say player A sees player B to E, and enemy A to G. Each of those players, see player A, but not necessarily each other. Same applies to enemies. Think of this question from a topdown perspective please. In many cases, for example, when a player shoots his gun, the server handles the sound as a radial "signal" that every other entity within reach "hear" and react upon. Doing these searches all the time for a whole area, containing possibly a lot of unrelated players and enemies, seems to be an issue, when the budget for each AI agent is so small. Should every entity cache whatever enters and exits from its radius of awareness? Is there a great way to trace the entities close by without flooding the memory with such caches? What about other AI related problems that may arise, after assuming the previous one works well? We're talking about environments with possibly hundreds of enemies, a swarm.

  Read the article

• Can't (re)install lazarus

  - by twice

  I had Lazarus installed (from website, not USC), while upgrading to 13.10 and after that, it posted some error message (which I can't remember) at every start. I decided it shouldn't suffer, so I started reinstalling it, but it didn't work. then I thought I'll start all over, and deleted and purged everything. But it still would not install. I found a similar, very similar question to mine here: Cant correctly install Lazarus I tried everything said there: sudo dpkg -l | grep "^rc" returned some packages: since sudo apt-get -f brought up the apt-get help message, and sudo apt-get -f install did nothing, I went ahead and manually purged every broken package, which seemed to bring me forward, since it removed the entries in sudo dpkg -l | grep "^rc". When I was done I tried it again, since it didn't work I rebooted, no change. this is the error message I get on the attempt to install the first package (fpc-2.6.2): root@Someone-PC:~# dpkg -i /home/someone/Desktop/fpc_2.6.2-0_amd64\ \(3\).deb (Reading database ... 242209 files and directories currently installed.) Unpacking fpc (from .../fpc_2.6.2-0_amd64 (3).deb) ... dpkg: error processing /home/someone/Desktop/fpc_2.6.2-0_amd64 (3).deb (--install): trying to overwrite '/usr/lib/fpc/2.6.2/msg/errores.msg', which is also in package fp-compiler-2.6.2 2.6.2-5 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /home/someone/Desktop/fpc_2.6.2-0_amd64 (3).deb So, how can I fix this? And install Lazarus?

  Read the article

• wireless is disabled by hardware lenovo 3000g430

  - by sudheer

  sir i have problem with my wifi switch sir please tell me solution for my problem (wifi is disabled by hardware). output of sudo lshw -C network is sudo] password for sudheer: *-network DISABLED description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:06:00.0 logical name: eth2 version: 01 serial: 00:21:00:72:3a:93 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:19 memory:f4700000-f4703fff *-network description: Ethernet interface product: NetLink BCM5906M Fast Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 02 serial: 00:1e:68:ad:24:0b size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=sb v3.04 ip=172.16.52.79 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:47 memory:f4600000-f460ffff output of iwconfig is lo no wireless extensions. eth2 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. sudheer@sudheer:~$ sudo iwlistscanning sudo: iwlistscanning: command not found ***sudheer@sudheer:~$ sudo iwlist scanning*** lo Interface doesn't support scanning. eth2 Failed to read scan data : Invalid argument eth0 Interface doesn't support scanning.

  Read the article

• Can Dungeons & Dragons Make You More Successful? [Video]

  - by Jason Fitzpatrick

  Dungeons & Dragons gets a bit of a bad rap in popular culture, but in this video treatise from Idea Channel, they propose that Dungeons & Dragons wires players for success. There are some deeply ingrained stereotypes about Dungeons & Dragons, and those stereotypes usually begin and end with people shouting “NERD!!!” But the reality of the D&D universe is a whole lot more complex. Rather than being an escape from reality, D&D is actually a way to enhance some important real life skillz! It’s a chance to learn problem solving, visualization, interaction, organization, people management… the list could go on and on. Plus, there are some very famous non-nerds who have declared an affinity for D&D, so best stop criticizing and join in if you want to be a successful at the game of life. While we’re trying not to let our love of all things gaming cloud our judgement, we’re finding it difficult to disagree with the premise that open-ended play fosters creative and adaptive thinking. Can Dungeons & Dragons Make You A Confident & Successful Person? [via Boing Boing] HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

  Read the article

• There's IP but can't reach gateway

  - by icky

  I have just installed ubuntu 12.04 on my new laptop, and brought it back to home, but I found the wireless network does not work. Strangely, it has the correct ip, but can't connect to the gateway. ifconfig gives ip 192.168.64.36, with broadcast 192.168.79.255 and mask 255.255.240.0, this are all correct, the gateway is at 192.168.64.1 cat /etc/resolv.conf nameserver 192.168.64.1 nameserver 127.0.0.1 which i think it's also right. but when I ping 192.168.64.1, all packages are lost. Please help me with this, I really do not know what happened to my network settings. Huckle, Thank you for your reply ifconfig wlan0 Link encap:Ethernet Hwaddr 88:f9:af:2a:ca:1b inet addr:192.168.64.36 Bcast:192.168.79.255 Mask:255.255.240.0 inet6 addr: fe80::8a9f:faff:fea2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:27 errors:0 dropped:0 overruns:0 frame:0 TX packets:376 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3950 TX byetes:60288 iwconfig wlan0 IEEE 802.11bgn ESSID:"Chiono" Mode:Managed Frequency:2.417 GHz Access Point: 82:54:99:94:6D:43 Bit Rate=13.5 Mb/s Tx-Power=13 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=70/70 Signal Level=-32 dBm Rx invalid nwid:0 Rx invalid crypt:0 RX invalid frag:0 Tx excessive retries: 9 Invalid misc:10 Missed beacon:0 route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.64.1 0.0.0.0 UG 0 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.64.0 * 255.255.240.0 U 2 0 0 0 wlan0 Thank you very much

  Read the article

• Raspberry Pi Now Shipping with 512MB RAM; Still Only $35

  - by Jason Fitzpatrick

  Fans of the tiny Raspberry Pi will be pleased to hear the new version of their Model B board now ships with 512MB of RAM (up from the previous 256MB). The best part about the upgrade? The price point stays at $35 a board. From the official Raspberry Pi blog: One of the most common suggestions we’ve heard since launch is that we should produce a more expensive “Model C” version of Raspberry Pi with extra RAM. This would be useful for people who want to use the Pi as a general-purpose computer, with multiple large applications running concurrently, and would enable some interesting embedded use cases (particularly using Java) which are slightly too heavyweight to fit comfortably in 256MB. The downside of this suggestion for us is that we’re very attached to $35 as our highest price point. With this in mind, we’re pleased to announce that from today all Model B Raspberry Pis will ship with 512MB of RAM as standard. If you have an outstanding order with either distributor, you will receive the upgraded device in place of the 256MB version you ordered. Units should start arriving in customers’ hands today, and we will be making a firmware upgrade available in the next couple of days to enable access to the additional memory. We’re excited to get our hands on a new board and try out Raspbmc with that extra RAM. HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

  Read the article

• Pandaboard crash on startup or freeze after minutes

  - by Meach

  I just received my Pandaboard ES (rev B) and I am having trouble after installing ubuntu-omap4-addons. Once I copied the image ubuntu-12.04-preinstalled-desktop-armhf+omap4.img on my sd card and boot the pandaboard with it, I run the following commands: sudo add-apt-repository ppa:tiomap-dev/release sudo apt-get update sudo apt-get dist-upgrade sudo apt-get install ubuntu-omap4-extras At the end of the installation of ubuntu-omap4-extras, Ubuntu tells me that a problem occurs when the console displays: ldconfig deferred processing now taking place Clicking on "report the problem" tell me that the problem concerns pvr-omap4-dkms. I read somewhere that this can happen and it is better to reinstall pvr-omap4-dkms. Which I am doing by running: sudo apt-get install --reinstall pvr-omap4-dkms I reboot. Then the board has sometimes difficulties to start Ubuntu: it freezes during the loading page, only action I can do is unplugging the board to start it again. Some other times, Ubuntu load successfully but then freeze at another random time, in the range 20 - 40 minutes. I searched on internet for similar bug and found this: https://bugs.launchpad.net/ubuntu/+source/linux-ti-omap4/+bug/971091 So I typed this in: update-rc.d ondemand disable apt-get -y install cpufrequtils echo 'ENABLE="true" GOVERNOR="performance" MAX_SPEED="0" MIN_SPEED="0"' > /etc/default/cpufrequtils cpufreq-set -r -g performance reboot But it doesn't seems to fix the bug. Another detail: on startup, before the loading screen of Ubuntu (when there is the two penguins displayed :)), it shows this: [0.297271] CPU1: Unknown IPI message 0x1 [0.308990] omap_hwmod: mcpdm: _wait_target_ready error: -16 [0.354705] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts [0.354766] omap_hwmod_mux_init: Could not allocate device mux entry [2.107086] thermal_get_slope:Getting slope is not supported for domain gpu [2.107116] thermal_get_offset:Getting offset is not supported for domain gpu [2.107299] stm_fw: vendor driver stm_ti1.0 registered [8.725555] OMAPRPC: Registration of OMAPRPC rpmsg service returned 0! debug=0 Any idea what can be wrong? I am not that good with Ubuntu so any help will be appreciated. Cheers! Meach

  Read the article

• E: Sub-process /usr/bin/dpkg returned an error code (1)

  - by kss

  sudo apt-get install acroread, i got the following output Reading package lists... Done Building dependency tree Reading state information... Done Suggested packages: libldap2 libgnome-speech7 The following NEW packages will be installed: acroread 0 upgraded, 1 newly installed, 0 to remove and 6 not upgraded. 1 not fully installed or removed. Need to get 0 B/60.1 MB of archives. After this operation, 142 MB of additional disk space will be used. (Reading database ... 237901 files and directories currently installed.) Unpacking acroread (from .../acroread_9.5.1-1precise1_i386.deb) ... dpkg: error processing /var/cache/apt/archives/acroread_9.5.1-1precise1_i386.deb (--unpack): failed in write on buffer copy for backend dpkg-deb during `./opt/Adobe/Reader9/Browser/intellinux/nppdf.so': No space left on device No apport report written because MaxReports is reached already dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for man-db ... /usr/bin/mandb: can't write to /var/cache/man/1645: No space left on device Errors were encountered while processing: /var/cache/apt/archives/acroread_9.5.1-1precise1_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• My internet connection slows or dies unexpectedly

  - by genesis

  I installed Ubuntu 10.04 once again and I'm having some problems which I had before, but I have no idea how I solved them. On Windows, everything's working fine and I had no problems with this. My problem is that sometimes, when browsing through the internet, webpages just start to load really slow, sometimes it doesn't load anything at all (Error 118 (net::ERR_CONNECTION_TIMED_OUT): The operation timed out.) and it starts to work after few minutes. My IPv4 settings are automatic (DHCP), and IPv6 settings are Ignored/Disabled. I think my previous problems had something to do with IPv6, but I'm not sure. Is there a fix for this? iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"Fsite1" Mode:Managed Frequency:2.442 GHz Access Point: C8:3A:35:40:43:68 Bit Rate=0 kb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=43/70 Signal level=-67 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0

  Read the article

• The Most Ridiculous Computer Cameos of All Time

  - by Jason Fitzpatrick

  For the last half century computers have played all sorts of major and minor roles in movies; check out this collection to see some of the more quirky and out-of-place appearances. Wired magazine rounds up some of the more oddball appearances of computers in film. Like, for example, the scene shown above from Soylent Green: Spoiler alert: Soylent Green is people! But that’s not the only thing we’re gonna spoil. Soylent Green is set in 2022, and at one point, you’ll notice that a government facility is still using a remote calculator that plugs into the CDC 6600, a machine that was state-of-the-art in 1971. Come to think of it, we should scratch this from the list. This is pretty close to completely accurate. Hit up the link below to check out the full gallery, including a really interesting bit about how the U.S. Government’s largest computer project–once decommissioned and sold as surplus–ended up on the sets of dozens of movies and television shows. The Most Wonderfully Ridiculous Movie Computers of All Time [Wired] Why Enabling “Do Not Track” Doesn’t Stop You From Being Tracked HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference

  Read the article

• IRQ Conflicts Causing Video Card and Boot Problems?

  - by sanpatricio

  tl;dr - I have 4 devices sharing 1 IRQ. Is this bad and how do I tell the BIOS to stop it? Background: I have an old Dell GX280 dual Pentium 4 that I (semi) resurrected last weekend with an installation of Ubuntu 12.04. Everything was going fine the first several hours until a problem that plagued me when WinXP was on that machine happened -- it froze. Completely froze. None of the myriad of ways I have found here on askubuntu helped me to regain control except a long-press of the power button to shut it off. Clearly, this wasn't a software/WinXP issue. After much googling, I found that hardware conflicts can often cause this sort of total lock-up and with all the odd blocks of yellow and flecks of color showing on my screen (both WinXP and Ubuntu) I figured my old GeForce 7600 was failing and causing me these odd issues. (A good canned-air dusting of the entire interior fixed the color fleck problem) Again, through much googling and numerous answers found on askubuntu, I somehow stumbled my way onto the lshw command. After going through it, line by line, I found that I have four devices sharing IRQ 16: eth0, wlan0, ide0 (DVD-RW), and my video card. In hindsight, I can recall weird instances of my Ethernet connection to another computer not working when I thought it should. I never full troubleshot those issues so it could be a coincidence. The other thing that has been plaguing me since installing Ubuntu (wasn't there during WinXP) has been periodic moments of my monitor getting no signal from Ubuntu during boot. The first couple days, it would disappear after the Dell boot screen and reappear at Ubuntu login. Now, it disappears after the Dell boot screen and doesn't return at all -- I have to hit F12 where I can load a safe mode version of Ubuntu and get more details like dmesg and lsdev. I also ran memtest86 overnight and woke up to zero errors, so failing RAM is out. Where do I go from here?

  Read the article

• Mapping Your Customer Experience Journey

  - by Michael Hylton

  For those who attended today’s Oracle Customer Experience Summit keynote you heard from Brian Curran talk about the strategies and best practices to implement customer experience (CX) in your organization.  He spoke about how this evolving journey begins by understanding six steps to transform your business and put your customers front and center.  Here are those key six steps: What are the strategic business objectives in your company? What are your operational objectives and KPIs necessary to measure a CX project? Build an income statement and create “what if” scenarios and see how changes impact your business’ bottom line.  Explore what keeps you from getting to your own goals for your business. Define the business objectives and opportunities you want to meet? Understand the trends and accelerators in the market?  What factors are going on in the market affect that impact your business?  Social?  Mobile?  Cloud?  Just to name a few.  Many of these trends may signal a change in the way people think about your business. What approach will you take to solve these issues?  Understand who your customer is.  How do you need to adapt your business to build relevant, personalized customer experiences. What technologies can you implement to address CX?  Does technology help you solve your problem? A great way to begin your customer experience journey is a concept called journey mapping, one of the most powerful and deceptively simple tools for unlocking CX innovation at your organization. Here is where you can learn more about how you can bring this concept into your business to drive great customer experiences.

  Read the article

• How to connect MTS MBlaze on ubuntu 11.04

  - by murali_ma

  i have installed ubuntu 11.04 inside the windows xp. i have MTS Mblaze USB Modem. (my service provider is MTS MBlaze,india) i want to use Mblaze into ubuntu so that i did the following steps for make connecting the device. from the task bar->edit connections->mobile broadband->choose country->mts mblaze and ok i give username and password ([email protected] and password MTS. ok now i enable mobile broadband , MTS MBlaze connection1(connection name) from task bar. steps followed from "http://randomshandom.wordpress.com/2010/12/20/how-to-connect-mts-mblaze-device-in-ubuntu-10-10-11-04/#more-3" for the first time it successfully connected and browse the internet. after i restart the system i connect it. it does not connected. it shows Modem network disconnected. i accessed many times and delete the connection and recreated but i does not help me. if i try to connect device i think it the search the network, i saw the wave signal. img Image for showing problem:

  Read the article

• The Talent Behind Customer Experience

  - by Christina McKeon

  Earlier, I wrote about Powerful Data Lessons from the Presidential Election. A key component of the Obama team’s data analysis deserves its own discussion—the people. Recruiters are probably scrambling to find out who those Obama data crunchers are and lure them into corporations. For the Obama team, these data scientists became a secret ingredient that the competition didn’t have. This team of analysts knew how to hear the signal and ignore the noise, how to segment and target its base, and how to model scenarios and revise plans based on what the data told them. The talent was the difference. As you work to transform your organization to be more customer-centric, don’t forget that talent is a critical element. Journey mapping is a good start to understanding how your talent impacts your customer experiences. Part of journey mapping includes documenting the “on-stage” and “back-stage” systems and touchpoints. When mapping this part of your customers’ journey, include the roles and talent behind the employee actions—both customer facing and further upstream from that customer touchpoint. Know what each of these roles does, how well you are retaining people in these areas, and your plans to fill these open positions in the future. To use data scientists as an example, this job will be in high demand over the next 10 years. The workforce is shrinking, and higher education institutions may not be able to turn out trained data scientists as fast as you need them. You don’t want to be caught with a skills deficit, so consider how you can best plan for the future talent you will need. Have your existing employees make their career aspirations known to you now. You may find you already have employees willing to take on roles that drive better customer experiences. Then develop customer experience talent from within your organization through targeted learning programs. If you know that you will need to go outside the organization, build those candidate relationships now. Nurture the candidates you want to hire and partner with universities, colleges, and trade associations so you can increase the number of qualified candidates in your talent pool.

  Read the article

• Creating Ubuntu Browser App Frames

  - by user73006

  After watching the video i am inspired to create one browser but stuck at one place, could you please help me with this. Requirement = - Like you displayed in your Video i wan create Multiple Buttons in my Toolbar which will open Second ToolBar or Popup Window. - From that Pop Window i wanted to Select Specific Button Which will open My Required Browser. Question - - As displayed in your Video i create new BUtton and If i try to open new link using that it works but now i want to display tool bar or Popup window once any one click on that button, how can i do that.The Second Tool Bar Need to be Activated only after clicking on that button. Things i Tried - - As per my understanding i create Second Toolbar and on that tool bar i have created Button, now i wan know how do i link that tool bar with my Browser Toolbar button. - I tried that by passing Signal Property in Second Toolbar in Quickly but something is missing. MY Code class TvbrowserWindow(Window): gtype_name = "TvbrowserWindow" def finish_initializing(self, builder): # pylint: disable=E1002 """Set up the main window""" super(TvbrowserWindow, self).finish_initializing(builder) self.AboutDialog = AboutTvbrowserDialog self.PreferencesDialog = PreferencesTvbrowserDialog # Code for other initialization actions should be added here. self.refreshbutton=self.builder.get_object("refreshbutton") self.SONY=self.builder.get_object("SONY") self.urlentry=self.builder.get_object("urlentry") self.scrolledwindow1=self.builder.get_object("scrolledwindow1") self.webview = WebKit.WebView() self.scrolledwindow1.add(self.webview) self.webview.show() def on_refreshbutton_clicked(self, widget): print "refresh" def on_urlentry_activate(self, widget): url = widget.get_text() print url self.webview.open(url)

  Read the article

• Never before had a problem with Ubuntu desktop graphical display; Trying to use nvidia GT630

  - by focaccio

  I've been using ubuntu since 9.04 and never had a problem with Ubuntu brining up the desktop graphical user interface. However I am currently not able to see anything graphical past the install screens. I have an Intel DP55KG motherboard and just installed an nvidia gt630 graphics card (zotac), since the old graphics card failed. I can install the server and see text. So I do a apt-get install ubuntu-desktop...or apt-get install kubuntu-desktop...or apt-get install xubuntu desktop, but after the reboot there is no display...its like something is hung up. I tried using the Live quantal dvd and I do see the graphical prompt to try without installing, but after that the screen goes blank. I've tried two monitors and the same thing happens. There is a faint "glow" on the screen and I do not get a "no input signal" from the monitor, so something is happening. I can install an old OEM of XP so I know the video card and motherboard are at least semi functional. Any help is appreciated. Thanks, Greg

  Read the article

• Wireless keeps disabling or stays disconnected (Realtek RTL8191SEvB)

  - by jindrichm

  I have Realtek RTL8191SEvB wireless card on Ubuntu 10.10: $ lspci -v | grep Network 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10) When I load its driver, according to the Network Manager it sometimes blinks with a list of available networks but it keeps disabling itself or it stays disconnected. So, I can't connect to any wi-fi network (which results in frustration). The driver is loaded: $ lsmod Module Size Used by r8192se_pci 509932 0 Looks normal: $ sudo lshw -C network *-network description: Wireless interface product: RTL8191SEvB Wireless LAN Controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 10 serial: 1c:65:9d:60:c7:7a width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl819xSE driverversion=0019.1207.2010 firmware=63 latency=0 link=no multicast=yes wireless=802.11bgn resources: irq:17 ioport:2000(size=256) memory:f0500000-f0503fff Configured: $ sudo iwconfig wlan0 wlan0 802.11bgn Nickname:"rtl8191SEVA2" Mode:Managed Frequency=2.412 GHz Access Point: Not-Associated Bit Rate:130 Mb/s Retry:on RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=10/100 Signal level=0 dBm Noise level=-100 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Is not blocked: $ rfkill list all 0: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: yes However something's happening with it: $ dmesg [ 6485.948668] InitializeAdapter8190(): ==++==> Turn off RF for RfOffReason(1073741824) ---------- [ 6486.062666] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 6486.062671] InitializeAdapter8192SE(): Set MRC settings on as default!! [ 6486.062675] HW_VAR_MRC: Turn on 1T1R MRC! [ 6486.064091] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6486.248761] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 6486.248771] InitializeAdapter8192SE(): Set MRC settings on as default!! [ 6486.248776] HW_VAR_MRC: Turn on 1T1R MRC! [ 6486.580083] GPIOChangeRF - HW Radio OFF [ 6486.610085] ============>sync_scan_hurryup out [ 6486.623814] ================>r8192_wx_set_scan(): hwradio off [ 6486.830484] =========>r8192_wx_set_essid():hw radio off,or Rf state is eRfOff, return So, does anyone know where the problem might be?

  Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >