Search Results

Search found 14308 results on 573 pages for 'ssas 2008'.

Page 49/573 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

• Site-to-Site PPTP VPN connection between two Windows Server 2008 R2 servers

  - by steve_eyre

  We have two Windows Server 2008 R2 machines, one in our main office and one in a new office which we have just moved offsite. The main office has previously been handling client-to-server PPTP VPN connections. Now that we have moved our second server out of office, we want to set up a demand-dial or persistent VPN connection from the second server to the primary. Using a custom setting RRAS profile, we have successfully managed to set up a site-to-site VPN connection so that from the second server itself, it can access any of the devices in the main office and communicate back. However, any connected machines in the second office cannot use this connection, even when using the second server as gateway. The demand-dial interface is setup from the Second Server dialing into Main Server and a static route set up on RRAS for 192.168.0.0 with subnet mask 255.255.0.0 pointing down this network interface. The main office has the network of 192.168.0.0/16 (subnet mask 255.255.0.0). The second office has the network of 172.16.100.0/24 (subnet mask 255.255.255.0). What steps do we need to take to ensure traffic from the second office PCs going towards 192.168.x.x addresses use the VPN route? Many Thanks in advance for any help the community can offer. Debug Information Here is the route print output from the second server: =========================================================================== Interface List 23...........................Main Office 22...........................RAS (Dial In) Interface 16...e0 db 55 12 fa 02 ......Local Area Connection - Virtual Network 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 24...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.16.100.250 172.16.100.222 261 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 <MAIN OFFICE IP> 255.255.255.255 172.16.100.250 172.16.100.222 6 172.16.100.0 255.255.255.0 On-link 172.16.100.222 261 172.16.100.113 255.255.255.255 On-link 172.16.100.113 306 172.16.100.222 255.255.255.255 On-link 172.16.100.222 261 172.16.100.223 255.255.255.255 On-link 172.16.100.222 261 172.16.100.224 255.255.255.255 On-link 172.16.100.222 261 172.16.100.225 255.255.255.255 On-link 172.16.100.222 261 172.16.100.226 255.255.255.255 On-link 172.16.100.222 261 172.16.100.227 255.255.255.255 On-link 172.16.100.222 261 172.16.100.228 255.255.255.255 On-link 172.16.100.222 261 172.16.100.229 255.255.255.255 On-link 172.16.100.222 261 172.16.100.230 255.255.255.255 On-link 172.16.100.222 261 172.16.100.255 255.255.255.255 On-link 172.16.100.222 261 192.168.0.0 255.255.0.0 192.168.101.87 192.168.101.17 266 192.168.101.17 255.255.255.255 On-link 192.168.101.17 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.16.100.222 261 224.0.0.0 240.0.0.0 On-link 172.16.100.113 306 224.0.0.0 240.0.0.0 On-link 192.168.101.17 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 172.16.100.222 261 255.255.255.255 255.255.255.255 On-link 172.16.100.113 306 255.255.255.255 255.255.255.255 On-link 192.168.101.17 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.0.200 Default 0.0.0.0 0.0.0.0 172.16.100.250 Default =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 16 261 fe80::/64 On-link 16 261 fe80::edf4:85c6:3c15:dcbe/128 On-link 1 306 ff00::/8 On-link 16 261 ff00::/8 On-link 22 306 ff00::/8 On-link =========================================================================== Persistent Routes: None And here is the route print from one of the second office PCs: =========================================================================== Interface List 11...10 78 d2 32 53 27 ......Atheros AR8151 PCI-E Gigabit Ethernet Controller 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.16.100.250 172.16.100.103 10 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 172.16.100.0 255.255.255.0 On-link 172.16.100.103 266 172.16.100.103 255.255.255.255 On-link 172.16.100.103 266 172.16.100.255 255.255.255.255 On-link 172.16.100.103 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.16.100.103 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 172.16.100.103 266 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 11 266 fe80::/64 On-link 11 266 fe80::e973:de17:a045:aa78/128 On-link 1 306 ff00::/8 On-link 11 266 ff00::/8 On-link =========================================================================== Persistent Routes: None

  Read the article

• SQL Server cluster install issue

  - by George2

  Hello everyone, I am going to install SQL Server 2008 Enterprise cluster on Windows Server 2008. I am wondering whether I have to setup a Windows domain (or active directory) in order to install SQL Server cluster? thanks in advance, George

  Read the article

• SSAS Tabular Workshop online and other upcoming dates (and updates!) #ssas #tabular

  - by Marco Russo (SQLBI)

  After many conferences and travels, this summer I had some time to write and prepare new sessions for the next wave of conferences. In reality I am just doing that, even if I already restarted traveling for consulting and training. So expect new content about DAX and Tabular coming in the next months! Starting to see real customer adopting Tabular is showing many new challenges and there is still a lot to learn and to create. If you still didn’t started working on Tabular, well, you should. As I always say, as a BI developer you should be able to choose between Tabular and Multidimensional, and in order to do that you should know both of them! One thing that I don’t like very much about marketing is that “Tabular is simpler”, because it’s often translated in “Tabular is for simple projects” when this last statement is not true. Actually, I see a lot of good reasons to adopt Tabular in complex data models, especially in non-traditional scenarios. I know, this is because I love to understand what are the actual limits of a technology, and I’m learning that there is simple a lot of space of improvement also for Tabular. It’s already fast, but it could be faster! How can you start? Well, first of all, by reading our book. Then, by attending to our SSAS Tabular workshop. There is an online edition of the workshop on September 3-4, 2012 (hurry up if you want to register), and there are already several dates planned for the next months (and others will be added soon!). And, of course, by installing SQL Server 2012 and trying to create models over your databases. If you are too lazy, just start with PowerPivot. As soon as you start working with Tabular or PowerPivot, you will see that there is one important skill you need: learning DAX. In the next few days I should publish an article that I’m finishing these days about best practices using SUMMARIZE and ADDCOLUMNS. If only someone published this article one year ago, I would have saved many hours of my life. But, you know, flight manuals are written in blood… and someone has to write! Stay tuned.

  Read the article

• SQL SERVER – What is SSAS Tabular Data model and Why to use it – Part 2

  - by Pinal Dave

  In my last article, I talked about the basics of tabular data model and why use it. Then I demonstrated step by step creation of a basic tabular model project. In this part I’m going to throw some light on how to create measures and analyses in excel. If you look at the tabular project closely, you will notice that we have not defined any measure yet. So, in the first step we will define the measure first.  Open the solution and select the column you want to define as a measure. Then, click on the summation icon on the toolbar. You will see the aggregated results at the bottom of that column. You have also other choices as well like average, min, max, count and distinct count. After creating the required measures, we need to analyze our data in excel. To do this, click on the excel icon in the upper left corner of the toolbar. This will open your analysis in excel. Notice the pivot table field list here. I have highlighted the measures that we created in the earlier step. Now, we can use these measures in our analysis Now, we have to put the required fields in their respective places as column labels, row labels, Values and Report filter for analysis. See below snapshot for details, it shows region wise sales on a yearly basis You can even apply filters on the above analysis by placing the slicer field in report filter. In our example, we will take an English product name as a filter. You can use the filter as depicted in the below snapshot. Optionally, you can also use the slider to filter data more interactively. Further to improve our analysis, we can insert pivot charts That’s all for this time, in my next post I’m going to show in detail about how to create hierarchies, perspectives, KPI’s  and many more features. Author: Namita Sharma, Senior Corporate Trainer at Koenig Solutions. Reference: Pinal Dave (http://blog.SQLAuthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: SSAS

  Read the article

• Error in Visual Studio 2008 with SSRS 2005 report projects

  - by Tj Kellie

  Has anyone found a good workaound for opening or editing an SSRS 2005 report project with Visual Studio 2008 yet? Will the SQL server 2008 tools be the migration path for these report projects in the future? I really dont want to have to keep VS2005 installed forever just to update SSRS reports. After an upgrade to VS2008 an existing solution that contains a VS2005 SSRS reports project will not open. From what I understand the SQL Server 2005 tools dont know about VS2008 so they will not integrate into the IDE. So currently I switch back to VS2005 for any updates to this project, and get an error loading project message everytime I open the solution in 2008. EDIT on solution: I was able to install the shared component for BDIS from the SQL2008 disc and am now able to open and update my SSRS 2005 .rdl project items within VS2008. Note to others: If you edit your SSRS 2005 reports in VS2008 and re-save you will not be able to edit them in VS2005 anymore, or deploy them to a 2005 server. They are up-converted to 2008 report files.

  Read the article

• Clipboard Copy-Paste doesn't work on Win Server 2008/Vista 64bit

  - by Itay Levin

  Hi, I am trying to use Clipboard API (in Delphi) to extract images from Word documents. my code works OK in Windows XP/2003 but in windows 2008 64 bit it doesn't work. in win 2008 i get an error saying that Clipboard.Formats is empty and doesn't contain any format. The image seems to be copied to the Clipboard (i can see it in the clipboard via Word) but when i try to ask the clipboard what format does he have it said it doesn't have any formats. how can i access the clipboard programmatically on win 2008/Vista? from what i know of 2008 64 bit, it might be a security issue... here is the code snippet: This is how i am trying to copy the Image to the clipboard: W.ActiveDocument.InlineShapes.Item(1).Select; // W is a word ole object W.Selection.Copy; and this is how i try to paste it. Clipboard.Open; Write2DebugFile('FormatCount = ' + IntToStr(Clipboard.FormatCount)); // FormatCount=0 For JJ := 1 to Clipboard.FormatCount Do Write2DebugFile('#'+ IntToStr(JJ) + ':' + IntToStr(Clipboard.Formats[JJ])); If (Clipboard.HasFormat(CF_BITMAP)) or (Clipboard.HasFormat(CF_PICTURE)) or (Clipboard.HasFormat(CF_METAFILEPICT)) then // all HasFormat calls returns false. Begin Jpeg := TJPEGImage.Create; Bitmap := TBitmap.Create; Bitmap.LoadFromClipboardFormat(cf_BitMap,ClipBoard.GetAsHandle(cf_Bitmap),0); Jpeg.Assign(Bitmap); Jpeg.SaveToFile(JpgFileN); try Jpeg.Free; except; end; ResizeImage(JpgFileN,750); Write2DebugFile('Saving ' + JpgFileN); End else Write2DebugFile('Doesnt have the right format'); Thanks in advance, Itay

  Read the article

• Undefined Web.config error in VS 2008

  - by user1066050

  I'm working on a web app using VS 2008, .Net 3.5 and C#. Most of the projects in the solution are either classic asp.net pages with some MVC 1 in the mix, the rest is shared libraries. The solution is one that is some 5 years old and has gone through a variety of developers working on it and clearly has some performance and architectural issues. Previously, I've been working on the project using VS 2008 on a Win XP machine, but have just transitioned over to a new box using Win 7 Ultimate. To do so, I've installed VS 2008, asp.net 3.5. To support future work on the solution I've also installed VS 2010 and asp.net 4.0. Opening the solution on the new box with VS 2008 works fine, and it builds without error. However, when I attempt to run it with the debugger, I get the following message: "There is an error in web.config. Please correct before proceeding. (You might rename the current web.config and add a new one.)" I think it's clear that there is some sort of environmental issue regarding web.config on the new machine, but the error message is not "helpful". Adding a new web.config is not an option as the existing one is quite long and involved (too much to post here). I'm hoping someone has a suggestion or two about where I might look for missing elements or changed configurations that might produce such an error message. Lacking that, I'll revisit this post and provide the web.config in the hope that will elicit further help. Thanks to all in advance for taking a look at this. The StackOverflow community has helped me many times in the past with pertinent answers although this is my first posting. Jeff

  Read the article

• Can't add client machine to windows server 2008 domain controller

  - by Patrick J Collins

  A bit of background before I dive into the gritty details: I have a single server running Windows 2003 Server where I host my ASP.net website and SQL Server + Reports. I've been creating ordinary windows user accounts to authenticate my users, and I enabled integrated windows authentication with impersonation. I've set up a bunch of user groups which correspond to certain roles (admin, power user, normal user, etc) and I test membership to enable or disable certain features. Overall, I'm pretty happy with the solution, it was quick to setup and I don't have to worry about messing around storing passwords and whatnot. Well, what I'm trying to do now is set up a new environment with 3 servers (Web, SQL, Reports) and I'd like these three servers to share common user accounts. I understand that I could add these three machines to a domain, which means installing Active Directory on one of the machines. I am barking up the wrong tree here? Would you suggest an alternative configuration? Assuming that I stick with AD, I have a couple of questions regarding DNS. To be honest, I'd rather not fiddle around with the DNS settings because my ISP already has their own DNS server which works just fine. It would appear however that DNS and AD are intertwined. Firstly, if I am to create a new domain in called mycompany.net, do I actually need to be the registered owner of that domain name and ensure the DNS entry points to the IP address of the machine hosting AD? Secondly, for the two other machines that I am trying to add to the domain, do I need to fiddle with their DNS settings? I've tried setting the preferred DNS Server IP address to that of my newly installed AD, but no luck. At this point, I can't add the two other machines to the domain. Here are some diagnostics that I have run based on a few suggestions I read on forums (sorry they're in French, although I could translate if needed). I ran nltest, which seems to indicate that the client can discover the domain controller. When I run dcdiag, the call to DsGetDcName fails with error 1722, not really sure what that means. Any suggestions? Thanks! C:\Users\Administrator>nltest /dsgetdc:mycompany.net Contrôleur de domaine : \\REPORTS.mycompany.net Adresse : \\111.111.111.111 GUID dom : 3333a4ec-ca56-4f02-bb9e-76c29c6c3832 Nom dom : mycompany.net Nom de la forêt : mycompany.net Nom de site du contrôleur de domaine : Default-First-Site-Name Nom de notre site : Default-First-Site-Name Indicateurs : PDC GC DS LDAP KDC TIMESERV WRITABLE DNS_DC DNS_DOMAIN DNS _FOREST CLOSE_SITE FULL_SECRET La commande a été correctement exécutée C:\Users\Administrator>dcdiag /s:mycompany.net /u: mycompany.net \pcollins /p:somepass Diagnostic du serveur d'annuaire Exécution de l'installation initiale : * Forêt AD identifiée. Collecte des informations initiales terminée. Exécution des tests initiaux nécessaires Test du serveur : Default-First-Site-Name\REPORTS Démarrage du test : Connectivity ......................... Le test Connectivity de REPORTS a réussi Exécution des tests principaux Test du serveur : Default-First-Site-Name\REPORTS Démarrage du test : Advertising Erreur irrécupérable : l'appel DsGetDcName (REPORTS) a échoué ; erreur 1722 Le localisateur n'a pas pu trouver le serveur. ......................... Le test Advertising de REPORTS a échoué Démarrage du test : FrsEvent Impossible d'interroger le journal des événements File Replication Service sur le serveur REPORTS.mycompany.net. Erreur 0x6ba « Le serveur RPC n'est pas disponible. » ......................... Le test FrsEvent de REPORTS a échoué Démarrage du test : DFSREvent Impossible d'interroger le journal des événements DFS Replication sur le serveur REPORTS.mycompany.net. Erreur 0x6ba « Le serveur RPC n'est pas disponible. » ......................... Le test DFSREvent de REPORTS a échoué Démarrage du test : SysVolCheck [REPORTS] Une opération net use ou LsaPolicy a échoué avec l'erreur 53, Le chemin réseau n'a pas été trouvé.. ......................... Le test SysVolCheck de REPORTS a échoué Démarrage du test : KccEvent Impossible d'interroger le journal des événements Directory Service sur le serveur REPORTS.mycompany.net. Erreur 0x6ba « Le serveur RPC n'est pas disponible. » ......................... Le test KccEvent de REPORTS a échoué Démarrage du test : KnowsOfRoleHolders ......................... Le test KnowsOfRoleHolders de REPORTS a réussi Démarrage du test : MachineAccount Impossible d'ouvrir le canal avec [REPORTS] : échec avec l'erreur 53 : Le chemin réseau n'a pas été trouvé. Impossible d'obtenir le nom de domaine NetBIOS Échec : impossible de tester le nom principal de service (SPN) HOST Échec : impossible de tester le nom principal de service (SPN) HOST ......................... Le test MachineAccount de REPORTS a réussi Démarrage du test : NCSecDesc ......................... Le test NCSecDesc de REPORTS a réussi Démarrage du test : NetLogons [REPORTS] Une opération net use ou LsaPolicy a échoué avec l'erreur 53, Le chemin réseau n'a pas été trouvé.. ......................... Le test NetLogons de REPORTS a échoué Démarrage du test : ObjectsReplicated ......................... Le test ObjectsReplicated de REPORTS a réussi Démarrage du test : Replications ......................... Le test Replications de REPORTS a réussi Démarrage du test : RidManager ......................... Le test RidManager de REPORTS a réussi Démarrage du test : Services Impossible d'ouvrir IPC distant à [REPORTS.mycompany.net] : erreur 0x35 « Le chemin réseau n'a pas été trouvé. » ......................... Le test Services de REPORTS a échoué Démarrage du test : SystemLog Impossible d'interroger le journal des événements System sur le serveur REPORTS.mycompany.net. Erreur 0x6ba « Le serveur RPC n'est pas disponible. » ......................... Le test SystemLog de REPORTS a échoué Démarrage du test : VerifyReferences ......................... Le test VerifyReferences de REPORTS a réussi Exécution de tests de partitions sur ForestDnsZones Démarrage du test : CheckSDRefDom ......................... Le test CheckSDRefDom de ForestDnsZones a réussi Démarrage du test : CrossRefValidation ......................... Le test CrossRefValidation de ForestDnsZones a réussi Exécution de tests de partitions sur DomainDnsZones Démarrage du test : CheckSDRefDom ......................... Le test CheckSDRefDom de DomainDnsZones a réussi Démarrage du test : CrossRefValidation ......................... Le test CrossRefValidation de DomainDnsZones a réussi Exécution de tests de partitions sur Schema Démarrage du test : CheckSDRefDom ......................... Le test CheckSDRefDom de Schema a réussi Démarrage du test : CrossRefValidation ......................... Le test CrossRefValidation de Schema a réussi Exécution de tests de partitions sur Configuration Démarrage du test : CheckSDRefDom ......................... Le test CheckSDRefDom de Configuration a réussi Démarrage du test : CrossRefValidation ......................... Le test CrossRefValidation de Configuration a réussi Exécution de tests de partitions sur mycompany Démarrage du test : CheckSDRefDom ......................... Le test CheckSDRefDom de mycompany a réussi Démarrage du test : CrossRefValidation ......................... Le test CrossRefValidation de mycompany a réussi Exécution de tests d'entreprise sur mycompany.net Démarrage du test : LocatorCheck Avertissement : l'appel DcGetDcName(GC_SERVER_REQUIRED) a échoué ; erreur 1722 Serveur de catalogue global introuvable - Les catalogues globaux ne fonctionnent pas. Avertissement : l'appel DcGetDcName(PDC_REQUIRED) a échoué ; erreur 1722 Contrôleur principal de domaine introuvable. Le serveur contenant le rôle PDC ne fonctionne pas. Avertissement : l'appel DcGetDcName(TIME_SERVER) a échoué ; erreur 1722 Serveur de temps introuvable. Le serveur contenant le rôle PDC ne fonctionne pas. Avertissement : l'appel DcGetDcName(GOOD_TIME_SERVER_PREFERRED) a échoué ; erreur 1722 Serveur de temps introuvable. Avertissement : l'appel DcGetDcName(KDC_REQUIRED) a échoué ; erreur 1722 Centre de distribution de clés introuvable : les centres de distribution de clés ne fonctionnent pas. ......................... Le test LocatorCheck de mycompany.net a échoué Démarrage du test : Intersite ......................... Le test Intersite de mycompany.net a réussi Update 1 : I am under the distinct impression that the problem is caused by some security settings. I have read elsewhere that the client needs to be able to access the fileshare sysvol. I had to enable Client for Microsoft Windows and File and Printer Sharing which were previously disabled. When I now run dcdiag the Advertising test works, which I suppose is forward progress. It currently chokes on the Services step (unable to open remote IPC). Démarrage du test : Services Impossible d'ouvrir IPC distant à [REPORTS.locbus.net] : erreur 0x35 « Le chemin réseau n'a pas été trouvé. » ......................... Le test Services de REPORTS a échoué The original English version of that error message : Could not open Remote ipc to [server] Update 2 : I attach some more diagnostics : Netsetup.log (client): 09/24/2009 13:27:09:773 ----------------------------------------------------------------- 09/24/2009 13:27:09:773 NetpValidateName: checking to see if 'WEB' is valid as type 1 name 09/24/2009 13:27:12:773 NetpCheckNetBiosNameNotInUse for 'WEB' [MACHINE] returned 0x0 09/24/2009 13:27:12:773 NetpValidateName: name 'WEB' is valid for type 1 09/24/2009 13:27:12:805 ----------------------------------------------------------------- 09/24/2009 13:27:12:805 NetpValidateName: checking to see if 'WEB' is valid as type 5 name 09/24/2009 13:27:12:805 NetpValidateName: name 'WEB' is valid for type 5 09/24/2009 13:27:12:852 ----------------------------------------------------------------- 09/24/2009 13:27:12:852 NetpValidateName: checking to see if 'MYCOMPANY.NET' is valid as type 3 name 09/24/2009 13:27:12:992 NetpCheckDomainNameIsValid [ Exists ] for 'MYCOMPANY.NET' returned 0x0 09/24/2009 13:27:12:992 NetpValidateName: name 'MYCOMPANY.NET' is valid for type 3 09/24/2009 13:27:21:320 ----------------------------------------------------------------- 09/24/2009 13:27:21:320 NetpDoDomainJoin 09/24/2009 13:27:21:320 NetpMachineValidToJoin: 'WEB' 09/24/2009 13:27:21:320 OS Version: 6.0 09/24/2009 13:27:21:320 Build number: 6002 09/24/2009 13:27:21:320 ServicePack: Service Pack 2 09/24/2009 13:27:21:414 SKU: Windows Server® 2008 Standard 09/24/2009 13:27:21:414 NetpDomainJoinLicensingCheck: ulLicenseValue=1, Status: 0x0 09/24/2009 13:27:21:414 NetpGetLsaPrimaryDomain: status: 0x0 09/24/2009 13:27:21:414 NetpMachineValidToJoin: status: 0x0 09/24/2009 13:27:21:414 NetpJoinDomain 09/24/2009 13:27:21:414 Machine: WEB 09/24/2009 13:27:21:414 Domain: MYCOMPANY.NET 09/24/2009 13:27:21:414 MachineAccountOU: (NULL) 09/24/2009 13:27:21:414 Account: MYCOMPANY.NET\pcollins 09/24/2009 13:27:21:414 Options: 0x25 09/24/2009 13:27:21:414 NetpLoadParameters: loading registry parameters... 09/24/2009 13:27:21:414 NetpLoadParameters: DNSNameResolutionRequired not found, defaulting to '1' 0x2 09/24/2009 13:27:21:414 NetpLoadParameters: status: 0x2 09/24/2009 13:27:21:414 NetpValidateName: checking to see if 'MYCOMPANY.NET' is valid as type 3 name 09/24/2009 13:27:21:523 NetpCheckDomainNameIsValid [ Exists ] for 'MYCOMPANY.NET' returned 0x0 09/24/2009 13:27:21:523 NetpValidateName: name 'MYCOMPANY.NET' is valid for type 3 09/24/2009 13:27:21:523 NetpDsGetDcName: trying to find DC in domain 'MYCOMPANY.NET', flags: 0x40001010 09/24/2009 13:27:22:039 NetpDsGetDcName: failed to find a DC having account 'WEB$': 0x525, last error is 0x79 09/24/2009 13:27:22:039 NetpDsGetDcName: status of verifying DNS A record name resolution for 'KING.MYCOMPANY.NET': 0x0 09/24/2009 13:27:22:039 NetpDsGetDcName: found DC '\\KING.MYCOMPANY.NET' in the specified domain 09/24/2009 13:27:30:039 NetUseAdd to \\KING.MYCOMPANY.NET\IPC$ returned 53 09/24/2009 13:27:30:039 NetpJoinDomain: status of connecting to dc '\\KING.MYCOMPANY.NET': 0x35 09/24/2009 13:27:30:039 NetpDoDomainJoin: status: 0x35 09/24/2009 13:27:30:148 ----------------------------------------------------------------- ipconfig /all (on client): Configuration IP de Windows Nom de l'hôte . . . . . . . . . . : WEB Suffixe DNS principal . . . . . . : Type de noeud. . . . . . . . . . : Hybride Routage IP activé . . . . . . . . : Non Proxy WINS activé . . . . . . . . : Non Carte Ethernet Connexion au réseau local : Suffixe DNS propre à la connexion. . . : Description. . . . . . . . . . . . . . : Intel 21140-Based PCI Fast Ethernet Adapter (Emulated) Adresse physique . . . . . . . . . . . : **-15-5D-A1-17-** DHCP activé. . . . . . . . . . . . . . : Non Configuration automatique activée. . . : Oui Adresse IPv4. . . . . . . . . . . : **.***.163.122(préféré) Masque de sous-réseau. . . . . . . . . : 255.255.255.0 Passerelle par défaut. . . . . . . . . : **.***.163.2 Serveurs DNS. . . . . . . . . . . . . : **.***.163.123 NetBIOS sur Tcpip. . . . . . . . . . . : Activé ipconfig /all (on server): Configuration IP de Windows Nom de l'hôte . . . . . . . . . . : KING Suffixe DNS principal . . . . . . : mycompany.net Type de noeud. . . . . . . . . . : Hybride Routage IP activé . . . . . . . . : Non Proxy WINS activé . . . . . . . . : Non Liste de recherche du suffixe DNS.: locbus.net Carte Ethernet Connexion au réseau local : Suffixe DNS propre à la connexion. . . : Description. . . . . . . . . . . . . . : Intel 21140-Based PCI Fast Ethernet Adapter (Emulated) Adresse physique . . . . . . . . . . . : **-15-5D-A1-1E-** DHCP activé. . . . . . . . . . . . . . : Non Configuration automatique activée. . . : Oui Adresse IPv4. . . . . . . . . . . : **.***.163.123(préféré) Masque de sous-réseau. . . . . . . . . : 255.255.255.0 Passerelle par défaut. . . . . . . . . : **.***.163.2 Serveurs DNS. . . . . . . . . . . . . : 127.0.0.1 NetBIOS sur Tcpip. . . . . . . . . . . : Activé nslookup (on client): Serveur : *******.***.com Address: **.***.163.123 Nom : mycompany.net Addresses: ****:****:a37b::****:a37b **.****.163.123

  Read the article

• Windows Server 2008: specifying the default IP address when NIC has multiple addresses

  - by Cédric Boivin

  I have a Windows Server which has ~10 IP addresses statically bound. The problem is I don't know how to specify the default IP address. Sometimes when I assign a new address to the NIC, the default IP address changes with the last IP entered in the advanced IP configuration on the NIC. This has the effect (since I use NAT) that the outgoing public IP changes too. Even though this problem is currently on Windows Server 2008 How can you set the default IP address on a NIC when it has multiple IP addresses bound? There is more explication on my probleme. Here is the ipconfig DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.99.49(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.51(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.52(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.53(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.54(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.55(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.56(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.57(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.58(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.59(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.60(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.61(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.62(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.64(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.65(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.66(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.67(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.68(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.70(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.71(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.100(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.108(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.109(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.112(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.63(Duplicate) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.99.1 If i do a pathping there is the answer, the first up is the 99.49, also if my default ip is 99.100 Tracing route to www.l.google.com [72.14.204.99] over a maximum of 30 hops: 0 Machine [192.168.99.49] There is the routing table on the machine Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.99.1 192.168.99.49 261 10.10.10.0 255.255.255.0 On-link 10.10.10.10 261 10.10.10.10 255.255.255.255 On-link 10.10.10.10 261 10.10.10.255 255.255.255.255 On-link 10.10.10.10 261 192.168.99.0 255.255.255.0 On-link 192.168.99.49 261 192.168.99.49 255.255.255.255 On-link 192.168.99.49 261 192.168.99.51 255.255.255.255 On-link 192.168.99.49 261 192.168.99.52 255.255.255.255 On-link 192.168.99.49 261 192.168.99.53 255.255.255.255 On-link 192.168.99.49 261 192.168.99.54 255.255.255.255 On-link 192.168.99.49 261 192.168.99.55 255.255.255.255 On-link 192.168.99.49 261 192.168.99.56 255.255.255.255 On-link 192.168.99.49 261 192.168.99.57 255.255.255.255 On-link 192.168.99.49 261 192.168.99.58 255.255.255.255 On-link 192.168.99.49 261 192.168.99.59 255.255.255.255 On-link 192.168.99.49 261 192.168.99.60 255.255.255.255 On-link 192.168.99.49 261 192.168.99.61 255.255.255.255 On-link 192.168.99.49 261 192.168.99.62 255.255.255.255 On-link 192.168.99.49 261 192.168.99.64 255.255.255.255 On-link 192.168.99.49 261 192.168.99.65 255.255.255.255 On-link 192.168.99.49 261 192.168.99.66 255.255.255.255 On-link 192.168.99.49 261 192.168.99.67 255.255.255.255 On-link 192.168.99.49 261 192.168.99.68 255.255.255.255 On-link 192.168.99.49 261 192.168.99.70 255.255.255.255 On-link 192.168.99.49 261 192.168.99.71 255.255.255.255 On-link 192.168.99.49 261 192.168.99.100 255.255.255.255 On-link 192.168.99.49 261 192.168.99.108 255.255.255.255 On-link 192.168.99.49 261 192.168.99.109 255.255.255.255 On-link 192.168.99.49 261 192.168.99.112 255.255.255.255 On-link 192.168.99.49 261 192.168.99.255 255.255.255.255 On-link 192.168.99.49 261 224.0.0.0 240.0.0.0 On-link 192.168.99.49 261 224.0.0.0 240.0.0.0 On-link 10.10.10.10 261 255.255.255.255 255.255.255.255 On-link 192.168.99.49 261 255.255.255.255 255.255.255.255 On-link 10.10.10.10 261 How i can be sure the ip use in the image ( suppose to be the default ip address ) will be use by my server as the default address ?

  Read the article

• Migrate Sql Server 2000. Which is better, 2005 vs 2008?

  - by Jhonny D. Cano -Leftware-

  My company has a Server with Windows Server 2003, and SQL Server 2000. We are planning to migrate just the database server, a provider said us the migration would be better to 2005 first, and then to 2008, because "the SQL Server 2008 is best suited for Windows Server 2008". Which are the pros and cons of each of these approaches? Migrate SQL 2000 to SQL 2005 and then to SQL 2008 Migrate SQL 2000 directly to SQL 2008 NOTE: Changing Operating System is not an option ($$$) right now for the company. Any article or experiences would be very much appreciated

  Read the article

• SQL Server 2008 data migration to another SQL 2008 server

  - by Confy

  I am currently running SQL server 2008 (SQLserverold) which homes databases for systemn center Service Manager 2012 Datawarehouse. This server is very old and needs to be decommisioned. Prior to decomissioning the serve, the databases have to be migrated to another clustered SQL server with two nodes(SQLServer1 and SQLserver2). I am not a DB admin no experience in SQL, and I have been given the task of migrating the Databases on the old server to the new custered environmnet. Can some point me to the right direction as to how i could do this. Step by step instruction would be helpful. Thank you in advance confy

  Read the article

• Which Edition of SQL Server 2008 R2 should you use?

  - by BuckWoody

  SQL Server 2008 R2 has just released to manufacturing (RTM’d) as I write this. With each new release, we make changes to the “Editions” we offer. A SQL Server “version” deals with the major changes in the product – and “edition” is a set of features and capabilities within that version (you’re welcome). So… definitely run over to http://msdn.microsoft.com/en-us/library/cc645993(v=SQL.105).aspx and check out the changes. For instance, did you know that SQL Server Express now supports 10GB databases? Well, then get over there and read what each edition does. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• CDO.Message problem on Windows Server 2008

  - by dcrowell@

  I have a Classic ASP page that creates a CDO.Message object to send email. The code works on Window Server 2003 but not 2008. On 2008 an "Access is denied" error gets thrown. Here is a simple test page I wrote to diagnose the problem. How can I get this to work on Windows Server 2008? dim myMail Set myMail=CreateObject("CDO.Message") If Err.Number < 0 Then Response.Write ("Error Occurred: ") Response.Write (Err.Description) Else Response.Write ("CDO.Message was created") myMail.Subject="Sending email with CDO" myMail.From="[email protected]" myMail.To="[email protected]" myMail.TextBody="This is a message." myMail.Send set myMail=nothing End If

  Read the article

• transaction log shipping sql server 2005 to 2008

  - by Andrew Jahn

  I have a reporting setup with SSRS on our sql server 2005 database. Because sql server 2008 is not supported by the main program which populates our database we are stuck with 2005 on our prod database. Unfortunately when I run our weekly check reports the web interface constantly times out because the server cant do the conversion to PDF. I've read that sql server 2008's SSRS is ALOT better with memory management. I was wondering if I can do some kind transact log shipping subscription publication from 2005 to 2008? Am I chasing a dream here.

  Read the article

• ASP.NET with VS 2008 How to Run Root "/" with Local Web Server

  - by harrije

  I want to use the built-in web server for VS 2008 and have it run my web-site project as the top level root "/". Instructions for VS 2005 can be found at: http://weblogs.asp.net/scottgu/archive/2006/12/19/tip-trick-how-to-run-a-root-site-with-the-local-web-server-using-vs-2005-sp1.aspx My problem is with step 3 of the instructions. When the the web-site project node is selected, right click never gives me an option to select a property-grid like that shown under step 3. Nor could I find another way in the menu or tool bar to get the property-grid. I don't know if the UI difference I'm seeing has to do with me using VS 2008 and the instructions are for VS 2005 or what? How do I get the web-site property-grid for VS 2008, or is there an alternative way to get the root setup I want?

  Read the article

• HRESULT exception not caught in VS 2008

  - by arionik

  Hello all, I've got a stange situation in visual studio 2008 C++. I work on code that was originally written for visual studio 2003, where everything works well. Now, ported to VS 2008, the exception handling, which unfortuantely exists widely in the code, does not work anymore. standard code example: try { HRESULT hr = S_OK; // do stuff... if( FAILED( hr ) ) throw hr; } catch( HRESULT hr ) { // error handling, but we never get here } catch( ... ) { // ... not even here } Under VS 2008, no exception is encountered, but I get a crash somewhere else, indicating that the stack pointer must be screwed up. Did anybody come across this behaviour? Any help is appreciated.

  Read the article

• Unable to install Management Studio Express 2008 due to Visual Studio 2008 installation

  - by Jamie

  I am attempting to install Managment Studio Express 2008 on a Win7 system that already has Visual Studio 2008 installed. I have installed VS 2008 SP1, which results in the About box for Visual Studio giving a version of 9.0.30792.1 SP. When I attempt the Management Studio installation I see a message that tells me that I must install SP1. However, this is already installed. After a fair bit of searching I came across the link below, where someone had commented with a command line option for the installation executable that forced it to skip the check. However, this simply pushed the error to later in the installation process. http://www.thushanfernando.com/index.php/2008/08/10/fix-rule-previous-releases-of-microsoft-visual-studio-2008-failed/. This seems to be a perennial problem for Microsoft. I can't remember a time when I've painlessly installed both Management Studio and Visual Studio. I can't imagine that this is an unusual combination, after all! Anyone had any success in solving this problem before I take on the day-long task of uninstalling and reinstalling Visual Studio and all its associated bits?

  Read the article

• Getting Server 2008 R2 to ignore all traffic from Internet-facing NIC, leaving it to a VM

  - by Wolvenmoon

  I got in to Server 2008 R2 via Dreamspark and would like to start learning on it. I don't have much option but to put it on a system sitting between the Internet and my home LAN due to electricity bills and the fact that 3 computers in an 11x11 space in 102 degree weather is pretty stygian. Currently I use a ClearOS gateway to manage everything, what I'd like to do is take my server 2008 R2 box, which has two NICs, and drop it at the head of my network. I'd want Server 2008 R2 to ignore all traffic on the external facing NIC and pass it to a virtual ClearOS gateway, and to put all its Internet traffic through its other NIC - which will face the rest of my network and be the default gateway for it. The theory is to keep the potentially vulnerable Server 2008 R2 install as tucked behind a Linux box as possible, without sacrificing too much performance. This is a home network that occasionally hosts dedicated game servers and voice chat servers, so most malicious activity is in the form of drive by non-targeted attacks, however, I don't trust Windows Server because I don't know the OS well enough, yet. So, three questions: How do I do this, am I going to be reasonably more secure doing this than if I just let the Server 2008 R2 rig handle all the network traffic and DHCP (not an option), and should I virtualize the Server 2008 R2 rig instead and if so in what? (Core 2 Duo e6600 w/ 5 gigs usable RAM)

  Read the article

• Installing a DHCP Service On Win2k8 ( Windows Server 2008 )

  - by Akshay Deep Lamba

  Introduction Dynamic Host Configuration Protocol (DHCP) is a core infrastructure service on any network that provides IP addressing and DNS server information to PC clients and any other device. DHCP is used so that you do not have to statically assign IP addresses to every device on your network and manage the issues that static IP addressing can create. More and more, DHCP is being expanded to fit into new network services like the Windows Health Service and Network Access Protection (NAP). However, before you can use it for more advanced services, you need to first install it and configure the basics. Let’s learn how to do that. Installing Windows Server 2008 DHCP Server Installing Windows Server 2008 DCHP Server is easy. DHCP Server is now a “role” of Windows Server 2008 – not a windows component as it was in the past. To do this, you will need a Windows Server 2008 system already installed and configured with a static IP address. You will need to know your network’s IP address range, the range of IP addresses you will want to hand out to your PC clients, your DNS server IP addresses, and your default gateway. Additionally, you will want to have a plan for all subnets involved, what scopes you will want to define, and what exclusions you will want to create. To start the DHCP installation process, you can click Add Roles from the Initial Configuration Tasks window or from Server Manager à Roles à Add Roles. Figure 1: Adding a new Role in Windows Server 2008 When the Add Roles Wizard comes up, you can click Next on that screen. Next, select that you want to add the DHCP Server Role, and click Next. Figure 2: Selecting the DHCP Server Role If you do not have a static IP address assigned on your server, you will get a warning that you should not install DHCP with a dynamic IP address. At this point, you will begin being prompted for IP network information, scope information, and DNS information. If you only want to install DHCP server with no configured scopes or settings, you can just click Next through these questions and proceed with the installation. On the other hand, you can optionally configure your DHCP Server during this part of the installation. In my case, I chose to take this opportunity to configure some basic IP settings and configure my first DHCP Scope. I was shown my network connection binding and asked to verify it, like this: Figure 3: Network connection binding What the wizard is asking is, “what interface do you want to provide DHCP services on?” I took the default and clicked Next. Next, I entered my Parent Domain, Primary DNS Server, and Alternate DNS Server (as you see below) and clicked Next. Figure 4: Entering domain and DNS information I opted NOT to use WINS on my network and I clicked Next. Then, I was promoted to configure a DHCP scope for the new DHCP Server. I have opted to configure an IP address range of 192.168.1.50-100 to cover the 25+ PC Clients on my local network. To do this, I clicked Add to add a new scope. As you see below, I named the Scope WBC-Local, configured the starting and ending IP addresses of 192.168.1.50-192.168.1.100, subnet mask of 255.255.255.0, default gateway of 192.168.1.1, type of subnet (wired), and activated the scope. Figure 5: Adding a new DHCP Scope Back in the Add Scope screen, I clicked Next to add the new scope (once the DHCP Server is installed). I chose to Disable DHCPv6 stateless mode for this server and clicked Next. Then, I confirmed my DHCP Installation Selections (on the screen below) and clicked Install. Figure 6: Confirm Installation Selections After only a few seconds, the DHCP Server was installed and I saw the window, below: Figure 7: Windows Server 2008 DHCP Server Installation succeeded I clicked Close to close the installer window, then moved on to how to manage my new DHCP Server. How to Manage your new Windows Server 2008 DHCP Server Like the installation, managing Windows Server 2008 DHCP Server is also easy. Back in my Windows Server 2008 Server Manager, under Roles, I clicked on the new DHCP Server entry. Figure 8: DHCP Server management in Server Manager While I cannot manage the DHCP Server scopes and clients from here, what I can do is to manage what events, services, and resources are related to the DHCP Server installation. Thus, this is a good place to go to check the status of the DHCP Server and what events have happened around it. However, to really configure the DHCP Server and see what clients have obtained IP addresses, I need to go to the DHCP Server MMC. To do this, I went to Start à Administrative Tools à DHCP Server, like this: Figure 9: Starting the DHCP Server MMC When expanded out, the MMC offers a lot of features. Here is what it looks like: Figure 10: The Windows Server 2008 DHCP Server MMC The DHCP Server MMC offers IPv4 & IPv6 DHCP Server info including all scopes, pools, leases, reservations, scope options, and server options. If I go into the address pool and the scope options, I can see that the configuration we made when we installed the DHCP Server did, indeed, work. The scope IP address range is there, and so are the DNS Server & default gateway. Figure 11: DHCP Server Address Pool Figure 12: DHCP Server Scope Options So how do we know that this really works if we do not test it? The answer is that we do not. Now, let’s test to make sure it works. How do we test our Windows Server 2008 DHCP Server? To test this, I have a Windows Vista PC Client on the same network segment as the Windows Server 2008 DHCP server. To be safe, I have no other devices on this network segment. I did an IPCONFIG /RELEASE then an IPCONFIG /RENEW and verified that I received an IP address from the new DHCP server, as you can see below: Figure 13: Vista client received IP address from new DHCP Server Also, I went to my Windows 2008 Server and verified that the new Vista client was listed as a client on the DHCP server. This did indeed check out, as you can see below: Figure 14: Win 2008 DHCP Server has the Vista client listed under Address Leases With that, I knew that I had a working configuration and we are done!

  Read the article

• Windows Server 2008 R2 Server Manager not working -> mmc.exe crashes with System.IO.FileNotFoundException

  - by Aleja_Vigo

  Since some days ago I can't run the Server Manager, it fails like this: Descripción: Stopped working Firma con problemas: Nombre del evento de problema: CLR20r3 Firma del problema 01: mmc.exe Firma del problema 02: 6.1.7600.16385 Firma del problema 03: 4a5bc808 Firma del problema 04: System.Management Firma del problema 05: 2.0.0.0 Firma del problema 06: 4ca2baf0 Firma del problema 07: 32f Firma del problema 08: 12b Firma del problema 09: System.IO.FileNotFoundException Versión del sistema operativo: 6.1.7601.2.1.0.272.7 There are other strange syntoms in the SO: Hyper-V stopped working as well, fails to load any VM information The desktop icons rearrange themselves all the time, and always on boot, after I move them. I use now an app that remembers their position to restore it... Windows Update service dissapeared, along with BITS service, I managed to recover them and installed all updates availables today I'm going nuts looking for information about these errors. Solutions that didn't work: sfc /scannow Doesn't complain about anything All windows updates applied (after recovering missing Windows Update) ServerManager.log: Only one error all the time: Error (Id=0) System.Runtime.InteropServices.COMException (0x800706D9): No hay más extremos disponibles desde el asignador de extremos. (Excepción de HRESULT: 0x800706D9) en Microsoft.Windows.ServerManager.NativeMethods.INetFwPolicy2.IsRuleGroupCurrentlyEnabled(String group) en Microsoft.Windows.ServerManager.DirectResult.GetRemoteManagementEnabled() In english : "There are no more endpoints available from the endpoint mapper" Where could I see which is the infamous file that mmc.exe is looking for in that System.IO.FileNotFoundException?? Please, any light on this would be much appreciated...

  Read the article

• Error when trying to open SQL Maintenance Plan - SSMS 2008

  - by alex

  If I open SSMS on my client machine, connect to our SQL server, and try and open a maintenance plan on there, I get this error: TITLE: Microsoft SQL Server Management Studio Could not load file or assembly 'msddsp, Version=9.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified. (Microsoft.DataTransformationServices.Design) ------------------------------ BUTTONS: OK If i try the same thing directly on the server, nothing happens (no errors or anything)

  Read the article

• "No active network adapters found" Hyper-V 2008 R2

  - by mnemosyn

  I fiddled around with the virtual network settings of my Hyper-V server, because Windows Update failed to run in the VMs. I set the flag that makes the NIC exclusively usable by the VM. Now, the host system tells me it has no active network adapters. What does that even mean? According to netsh, there are three enabled network connections. I tried to restart the NICs using devcon.exe (the correct x64 version), but that doesn't make any difference - still, devcon reports the NICs are there and they are activated?! Is there any way I can force the host to re-enable the NICs?

  Read the article

• Password policy problem windows server 2008

  - by PilotKen

  Hi, I'm creating a domain and I need to make users that can have an empty password but administrators have to comply with password complexity how to I solve this problem? Thanks in advance

  Read the article

• Can't access SQL Server 2008 from workstations, but can from server

  - by Kev

  We have an app that can use mssql2k or 2k8. We've been using 2k but I decided to try 2k8 to compare. I installed in on our win2k3 server alongside mssql2k. In the ODBC applet on the server, I was able to set up access to 2k8, and it passes the test at the end successfully, whether I tell it to use Windows Authentication or an sql login. The latter is how the app always accessed mssql2k. The app works fine from the server, but when I try it on a workstation (winxpsp3), I get a window titled, "Microsoft SQL Server Login" that says: Connection failed: SQLState: '01000' SQL Server Error: 53 [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()). Connection failed: SQLState: '08001' SQL Server ERror: 17 [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied. Then I get the ODBC login dialog, which I can't get to login correctly (I just keep getting the same error above), even copying and pasting a password after resetting it on the server, and whether "trusted" is checked or not. "Options" is disabled. The server was straight SERVERNAME for mssql2k, but for mssql2k8 it's called SERVERNAME\mssql2008. That works on the server, why not on the workstation? (Which I'm logged in as the same person on, BTW.)

  Read the article

• Server 2008 RAID5 resynching

  - by benpage

  I built a W2K8 R2 server last weekend, and built a R5 array using Disk Management, 5x 1TB drives. For the next 60 hours the status said 'Resynching (X%)' as it built the array. during this time i did read and write to the drive (slowly) and once the rebuild was complete speeds were quite fast. I was copying over some data from a USB hard drive overnight, and the machine crashed (looking in the error i believe it was the driver for the usb drive) and so the RAID5 went back to resynching, since the machine was not shut down properly. The issue is, it's been about 48 hours since that started and I'm happy to say it will take roughly 60 hours again to resynch, however.. all this time in Disk Management, the status has only said 'Resynching', not 'Resynching (X%)'. The hard drive light is going nuts, and read/writes are slow again, so I'm assuming it is actually resynching. The question is - is that a correct assumption? and why is disk management not telling me what %age it's done? Is this normal behaviour for a not-properly-shut-down r5 array?

  Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >