Search Results

Search found 6186 results on 248 pages for 'triple monitor'.

Page 49/248 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

• What is the process for diagnosing a ViewSonic Monitor? [closed]

  - by Phxvyper

  I have a ViewSonic monitor that has been busted for quite some time. I've been researching it and i still have no clue as to why it doesn't work. It doesn't turn on. Or rather, it will turn on, but it will not display anything. How do i go about diagnosing the monitor? The monitor is a: ViewSonic VG2230WM Model #: VS11422 Fix: I opened up the monitor and replaced all of the burst capacitors. The monitor works beautifully now.

  Read the article

• Can I use Server Monitor with a non-server Mac?

  - by Chris

  I have a computer I use as a simple file and web server. I am simply desiring to be able to monitor load, traffic, memory usage, etc via Server Monitor. I have also downloaded an app for my iPhone which does the same thing, but it uses the same protocol that Server Monitor does. Is it possible to get Server Monitor to recognize my non-server box as a server so I can monitor this information? For reference, I am running 10.4.11 on this PPC box. Thanks in advance!

  Read the article

• Nvidia Drivers on Debian / Lenny (Stable) -> Installation successful -> Monitors gets black

  - by David

  I have successfully installed the proprietary drivers for my nvidia (geforce 7300 gt) graphics card on debian/lenny. I know its not the best way to chose for driver installation ( see this link: http://wiki.debian.org/NvidiaGraphicsDrivers#non-freedrivers ). but the two ways seem to be possible for me (nvidia-kernel module compilation). Now the problem is that the monitors gets black, the power light starts blinking after i launch the x-server. Have a short look a the logs (output truncated from /var/log/Xorg.0.log): (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) Jul 28 17:10:11 NVIDIA(0): Enabling RENDER acceleration (II) Jul 28 17:10:11 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) Jul 28 17:10:11 NVIDIA(0): enabled. (II) Jul 28 17:10:11 NVIDIA(0): NVIDIA GPU GeForce 7300 GT (G73) at PCI:1:0:0 (GPU-0) (--) Jul 28 17:10:11 NVIDIA(0): Memory: 262144 kBytes (--) Jul 28 17:10:11 NVIDIA(0): VideoBIOS: 05.73.22.25.00 (II) Jul 28 17:10:11 NVIDIA(0): Detected PCI Express Link width: 16X (--) Jul 28 17:10:11 NVIDIA(0): Interlaced video modes are supported on this GPU (--) Jul 28 17:10:11 NVIDIA(0): Connected display device(s) on GeForce 7300 GT at PCI:1:0:0: (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (CRT-0) (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (DFP-0) (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (DFP-0): 165.0 MHz maximum pixel clock (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Single Link TMDS (II) Jul 28 17:10:11 NVIDIA(0): Assigned Display Device: CRT-0 (==) Jul 28 17:10:11 NVIDIA(0): (==) Jul 28 17:10:11 NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" (==) Jul 28 17:10:11 NVIDIA(0): will be used as the requested mode. (==) Jul 28 17:10:11 NVIDIA(0): (II) Jul 28 17:10:11 NVIDIA(0): Validated modes: (II) Jul 28 17:10:11 NVIDIA(0): "nvidia-auto-select" (II) Jul 28 17:10:11 NVIDIA(0): Virtual screen size determined to be 1280 x 1024 (--) Jul 28 17:10:11 NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config (--) Jul 28 17:10:11 NVIDIA(0): option (==) Jul 28 17:10:11 NVIDIA(0): Enabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp Here is the complete /etc/X11/xorg.conf file as generated by nvidia-xconfig: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:59 PDT 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "Module" Load "dbe" Load "extmod" Load "type1" Load "freetype" Load "glx" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" Hor

  Read the article

• Operating system for visualization app in 6 monitors

  - by Federico

  Hi. I have to plan the development for an application with these major requirements: Show different graphical data and animations in 6 monitors, in fullscreen mode. The hardware to be used is a PC with 3 NVIDIA GeForce 9800 GX2 cards. I have some expertise working with OpenGL, but never with more than one monitor. I have the (some limited) freedom to choose an operating system for the application. My options are: Windows XP, Windows Vista, Windows 7, Ubuntu 8.04/10.04. I would like to know, if you have some expertise or knowledge in the multi-monitor application development field, what is the recommended operating system for this kind of application? And, do I need any software other than the operating system and the NVIDIA drivers to be able to use the 6 monitors in fullscreen, showing different things in each one of them? Any comment/answer will be really appreciated. Thanks in advance! Federico

  Read the article

• ATI Radeon HD with Catalyst driver stuck mirroring screens

  - by Mike Axiak

  In 11.10 I replaced my aging Nvidia card with a new Radeon HD 6970 card. The single card has two DVI output ports which I've connected to two monitors. I installed Catalyst version 11.9 and I cannot get multiple monitors set up the way I want. I tried: $ sudo amdcccle and setting the mode to single desktop multiple monitors and whenever I do that Unity crashes and I get back to the login screen. Nothing shows up in the Xorg.*.log files for me to post here. There's only one card so I don't think xinerama would be any help here. Anyone have any ideas? EDIT: Here's my xorg.conf file: Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "0-DFP3" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x1024" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x1024" Option "TargetRefresh" "75" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" Option "Monitor-DFP3" "0-DFP3" Option "Monitor-CRT1" "0-CRT1" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "amdcccle-Device[5]-1" Driver "fglrx" Option "Monitor-DFP3" "0-DFP3" BusID "PCI:5:0:0" Screen 1 EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" DefaultDepth 24 SubSection "Display" EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[5]-1" Device "amdcccle-Device[5]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Maximizing after moving RDC window between different size monitors

  - by msorens

  My Win7 system has two monitors of different sizes. When I open a Remote Desktop Connection on one monitor set to use full screen, both the RDC window and the remote system's desktop fills the monitor. If I then move the window onto my second monitor (1-Restore Down button to make it movable; 2-Drag window to other monitor; 3-Maximize button to fill monitor) the RDC window fills the monitor, but the remote system's desktop remains the same size it was before. Thus, if I move from the larger to the smaller monitor I have scrollbars to see the whole remote desktop, while if I move from the smaller to the larger monitor the remote desktop occupies only a portion of the monitor. My workaround is to close the RDC window completely then re-establish it on the other monitor. Is there a way to avoid this overhead and just resize the remote desktop to fit?

  Read the article

• Is there a way to force lubuntu screen resolution?

  - by za1

  I have a Dell Inspiron 4000, 900 Mhz Pentium III, 192 MB RAM,10.1 GB disk running Lubuntu 12.04. When I start the computer, and I check the display resolution, Monitor Settings claims that the max resolution is 1024x768. I then connected another monitor I had lying around, rebooted, and now the laptop monitor looks normal,and monitor settings claims that 1280x1024 is the max resolution (it is) and the other monitor doesn't turn on. (black screen) The external monitor is not broken. Is there a way to, without the external monitor, force the laptop monitor resolution to 1280x1024? (The following is another question) - How can you run commands automatically at startup? Specifically "xinput 18 118 0" (without quotes) The first question is important, I can live with typing the second one at every boot. Thanks

  Read the article

• Laptop Asus P50IJ with Intel 4500M GMA output going to a Dell 1907FP external monitor will not allow

  - by ProfessionalAmateur

  Hello - I just purchased an Asus P50IJ-X2 laptop which has a Intel GMA 4500M video card running Windows7. At work I output this laptop to a Dell 1907FP LCD which has a maximum resolution of 1280x1024. Not matter what I do the Windows will not allow the laptop to set a resolution higher than 1024x768 to this LCD monitor. Ive even gone to the extent of downloading PowerStrip (I'd post a link but Im new and can only enter 1 url, if you google for powerstrip its the first option) to create a custom driver for my monitor thinking Windows was having a hard time seeing the available resolutions it would accept. However, powerstrip read the registery and properly sees the monitor and what its capable of so Im now at a complete loss as to why Windows7 will not allow me to set/use a 1280x1024 resolution for this external monitor (as my last laptop did running Vista). The Intel documentation (http://software.intel.com/en-us/articles/quick-reference-guide-to-intel-integrated-graphics/) indicates that the GMA 4500M should be able to run up to a 2560x1600 max res. The Dell 1907FP specification states it can run up to a 1280x1024 res. But no matter what the computer will not allow me to set higher than a 1024x768. I'm completely baffled but I would really like to be able to output this laptop to a reasonable resolution, 1024x768 makes me feel like I'm using my mom's computer. Any help would be greatly appreciated! Here are some attached images (I apologize for the links, being new I cannot post images) that should help explain this better: Image 1 - This image is from powerstrip which shows the monitors max accepted resolution and at the top right the max res my PC currently allows. (http://imgur.com/agrno.png) Image 2 - This shows my Windows7 resolution picker. (http://imgur.com/3nv6q.png) Image 3 - The 'List all modes' option taken from the Screen Resolution Advanced Settings List All Modes. (http://imgur.com/AMREh.png) Image 4 - Monitor information from registry read by powerstrip, this shows the laptop is able to read the necessary info from the LCD monitor. (http://imgur.com/hUX4D.png)

  Read the article

• There's a stray current flowing from my monitor through the VGA cable to the PC. Is this safe?

  - by EApubs

  I have two monitors in my machine. One is an old LCS samsung monitor. Recently, I started to hear a small hum in my speakers (subwoofer) and replaced them. The new one also got the issues then I found our that its a grounding issue. I unplugged the PC's power chord. The monitor is still switched on. When I checked, there's current in the earth pin (ground pin). When I unplug the monitor, there's no current and the speaker is normal. Now, I have moved that monitor to my dad's machine and took his monitor. My question is, is it a big issues? The house's earthing system is working and its grounding the current. I won't feel it if I touch the machine like in many other cases. But still, is it good to keep that monitor attached to my machine? Can it harm the computer? What should I do?

  Read the article

• 2560 x 1600 screen resolution not available when a second monitor is attached.

  - by sgmoore

  I am running Windows 7 (64-bit edition) and have a 30" Dell 3007WFP monitor which runs at a screen resolution of 2560 x 1600. This works perfectly until I try to connect a second monitor, and then the screen resolution on the main monitor immediately drops to 1280x800 and I can't change it back up to the correct resolution until I disconnect the second monitor. The graphics card is a Nvidia Quadro FX 370. This has a dual link DVI connector (to which the 30" is connected) and a single link DVI connector. The second monitor can run at 1920x1080 and is connected using a VGA to DVI connector. Note, it does not seem to matter whether the second monitor is running at 1920x1080 or even at 800x600. Windows reports Total Available Graphics Memory: 3839MB Dedicated Video Memory: 256MB System Video Memory: 0MB Shared System Memory: 3583MB Does anyone know if this a limitation with the video card, memory, drivers, connectors or something else? If this is a limitation with the video card, can anyone recommend a PCI Express 16 card that would support at least this setup, but preferably support two 30" monitors both running 2560 x 1600. (I'm not into gaming etc, so it doesn't need to be very powerful)

  Read the article

• WCF Windows Service Monitor and process emails

  - by acadia

  Hello, I need your suggestions in solving this issue. Here is the requirement. We have a Microsoft Exchange server and we have a service email account [email protected]. We have scanners all owner the company when a user scans a document and email is sent to [email protected] as attachment. Now I need to write a Windows service which needs to monitor that email account and whenever an email is received, read the attachement and store it in the database. My question is, is it possible to do something of this sort? Any suggestions greatly appreciated. Thanks

  Read the article

• Best tools to monitor Tomcat

  - by Pier Luigi

  Hi all, I'm searching free tools for monitor tomcat (traffic, memory usage, threads, requests, CPU, logs,...). I'm currently using lambdaprobe on Tomcat 5.5.x, but it seems that is no more developed (or not? the site lambdaprobe.org is always down for me...). Has someone good experiences to share? In lambdaprobe there are some info available only if tomcat is instrumented with JMX. Well, JMX is something of strange and mysterious for me. Is a good solution in a production server? It's worth to spend my (little) time to learn it?

  Read the article

• Monitor RAM usage on CentOS and restart Apache at a certain usage

  - by Chris

  Hi, I'm running a CentOS 5.3 server with a basic LAMP stack. I've optimized LAMP and my code to run efficiently as possible, but Apache has a memory leak somewhere that kills my server every hour or so. What is the best way to write a script that will monitor the memory usage and if it peaks over, say, 450MB kill all the Apache processes and restart Apache. I know C++/PHP and basic Linux server administration but I'm not familiar with Perl or bash scripting. I'd be open to learn any solutions, though, as a temporary solution while I find the issue.

  Read the article

• Perfmon on Vista to monitor .Net CLR memory for dutch dummies

  - by Dabblernl

  OK... My managed .Net program is eating memory leading it to crash after a few hours with a OutOfMemoryException. I want to investigate this starting with using perfmon.exe. I found a description on how to do this here However, I have a dutch Vista and the terms used differ widely from the ones used in this blog and I find myself simply unable to set it up. Can someone point me the way by stating "first from the top,second from the left" how to set up a performance monitor for my .Net program?

  Read the article

• Margin animate problem with Monitor display settings

  - by Jake

  I have an issue with an animation on a webpage. I have this div with text inside of it that I set the margin using css and when the page is loaded I use jquery to animate the div to a certain part of the page. The problem is it works with my concrete pixel settings, but if I change the properties of the monitor display settings in screen resolution(pixels), the div does not animate to the appropriate spot and it doesn't even start off at the appropriate spot from the css. Sample code: #div{ position:absolute; top:20px; left:50px } $("#div").animate({marginLeft: "250px"},2000); Is there a way to have the settings of the animation margin end at the approriate position no matter what the screen resolution is?

  Read the article

• How to monitor screen updates?

  - by user299600

  I am trying to write a program that monitors when the screen has been redrawn. Meaning if any part of any window is redrawn, then the program is notified. As far as I understand I should use a journal record hook like at http://www.vbaccelerator.com/home/vb/code/libraries/Hooks/Journal_Record_Hooks/article.asp However, I do not understand which MSG type would get me the WM_PAINT events (WH_CALLWNDPROC and WH_CALLWNDPROCRET do not seem to do the job). I'm not even sure that WM_PAINT is what I'm looking for... Basically, if I knew when the DC associated with GetDesktopWindow() has changed then my problem would be solved. Question is: How do you monitor screen updates?

  Read the article

• Performance monitor shows 4294967293 sessions active

  - by TGnat

  I have an ASP.Net 3.5 website running in IIS 6 on Windows Server 2003 R2. It is a relatively small internal application that probably serves less than ten users at any given time. The server has 4 Gig of memory and shows that 3+ Gig is available while the site is active. Just minutes after restarting the web application Performance monitor shows that there is a whopping 4,294,967,293 sessions active! I am fairly certain that this number is incorrect; at the time this reading there were only 100 requests to the website. Has anyone else experienced this kind odd behavior from perf mon? Any ideas on how to get an accurate reading? UPDATE: After running for about an hour the number of active sessions has dropped by 4. So it does seem to be responding to sessions timing out.

  Read the article

• Thread.sleep vs Monitor.Wait vs RegisteredWaitHandle?

  - by Royi Namir

  (the following items has different goals , but im interesting knowing how they "PAUSEd") questions Thread.sleep - Does it impact performance on a system ?does it tie up a thread with its wait ? what about Monitor.Wait ? what is the difference in the way they "wait"? do they tie up a thread with their wait ? what aboutRegisteredWaitHandle ? This method accepts a delegate that is executed when a wait handle is signaled. While it’s waiting, it doesn’t tie up a thread. so some thread are paused and can be woken by a delegate , while others just wait ? spin ? can someone please make things clearer ? edit http://www.albahari.com/threading/part2.aspx

  Read the article

• What interprocess locking calls should I monitor?

  - by Matt Joiner

  I'm monitoring a process with strace/ltrace in the hope to find and intercept a call that checks, and potentially activates some kind of globally shared lock. While I've dealt with and read about several forms of interprocess locking on Linux before, I'm drawing a blank on what to calls to look for. Currently my only suspect is futex() which comes up very early on in the process' execution. Update0 There is some confusion about what I'm after. I'm monitoring an existing process for calls to persistent interprocess memory or equivalent. I'd like to know what system and library calls to look for. I have no intention call these myself, so naturally futex() will come up, I'm sure many libraries will implement their locking calls in terms of this, etc. Update1 I'd like a list of function names or a link to documentation, that I should monitor at the ltrace and strace levels (and specifying which). Any other good advice about how to track and locate the global lock in mind would be great.

  Read the article

• Monitor file in Java on Linux 64bits

  - by Tim

  I'd like to be notified when a file has been created, deleted or changed, but not using polling mechanism. I have surveyed related Java API that can use.(EX:JNotify, JPathWatch and JXFileWatcher) Those APIs provide file monitor by using native component on OS. But I met the same problem is that they can't run on Linux 64bits, because native component in those APIs donen't support Linux 64bits, and this confused me for a long time. I also know that there'll be a WatchService API as part of NIO2 in JDK7, but JDK7 has not released yet. So, can any one suggest me a better solution? Very Thanks.

  Read the article

• How can I retrieve monitor information?

  - by Jon Tackabury

  I am trying to retrieve the monitor ID's as shown in the Windows display properties (#1, 2... etc), but I can't seem to find a way. I have tried using EnumDisplayMonitors as well as EnumDisplayDevices. They both return something like "\.\DISPLAY1". However, this number doesn't always match the number shown by Windows, especially when 2 video cards are being used to drive 3 or more monitors. Is there an API call I am missing to retrieve this information, or is there a way to get it from the registry or somewhere else? Thanks! I have tried these methods: Win32: EnumDisplayMonitors, EnumDisplayDevices: Neither of these return monitors that aren't active, and neither one returns the correct IDs. WMI: "select * from Win32_DesktopMonitor" doesn't return all the monitors, and there is no ID. Registry: I have found the monitors in various locations, none of the places I found have the info I am looking for. Any help is much appreciated. :)

  Read the article

• Connecting ipad to external monitor

  - by Josh P.

  I am trying to connect my ipad app to an external screen using the following (not checking the correct resolution for no - just want it up and running). - (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions { [window addSubview:[navigationController view]]; if ([[UIScreen screens] count] > 1) { window.screen = [[UIScreen screens] objectAtIndex:1]; } [window makeKeyAndVisible]; return YES; } Is this supposed to redirect everything to the external monitor? How dows it work with touches/gestures? I see in the Apple apps, the controls etc are left on the ipad screen...

  Read the article

• Ubuntu quickly (python/gtk) - how to monitor stdin?

  - by neil

  I'm starting to work with Ubuntu's "quickly" framework, which is python/gtk based. I want to write a gui wrapper for a textmode C state-machine that uses stdin/stdout. I'm new to gtk. I can see that the python print command will write to the terminal window, so I assume I could redirect that to my C program's stdin. But how can I get my quickly program to monitor stdin (i.e. watch for the C program's stdout responses)? I suppose I need some sort of polling loop, but I don't know if/where that is supported within the "quickly" framework. Or is redirection not the way to go - should I be looking at something like gobject.spawn_async?

  Read the article

• Tool to monitor IE performance running JavaScript

  - by StefanE

  Hi, Company I work for are one of the largest betting companies in Europe and the website has thousands of lines of JavaScript on all our pages. Lately Internet Explorer versions earlier than version 9 are running painfully slow and I want to be able to monitor what parts of a page load (including scripts) that are slow. I know that IE are slower in general and has DOM API issues etc. What I want to accomplish is a way to quickly identify slow parts and see if we can replace the code with IE specific code that will render with higher performance. Cheers, Stefan

  Read the article

• How to show a firemonkey form on second monitor

  - by Shaun07776

  I am trying to display a FireMonkey form on a second monitor, using C++Builder with following code: void __fastcall ShowFormOnScreen( int OutMon ) { MyForm->Top = 0; MyForm->BorderStyle = bsNone; MyForm->WindowState = wsNormal; MyForm->Left = Screen->Monitors[OutMon]->Left; MyForm->Height = Screen->Monitors[OutMon]->Height; MyForm->Width = Screen->Monitors[OutMon]->Width; MyForm->Show(); } Unfortunately, the Screen object does not have the Monitors property, so how can do this in FireMonkey?

  Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >