Search Results

Search found 14588 results on 584 pages for 'usb drive'.

Page 49/584 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

• How can I get a USB floppy drive to work?

  - by jfmessier

  I have a Toshiba USB floppy drive that I need to use under Ubuntu. When I connect it, and insert a floppy disk in it, I do not see anything mounted under Ubuntu 10.10. I was suspecting the hardware and/or the floppy disk to be defective, and so I tested the floppy disk as well as the floppy drive itself under Windows XP, and everything was just fine. I was able to find the following instructions: Add the following line to the /etc/modules file: floppy Enter the following shell commands: mkdir /media/floppy mount -t vfat /dev/sdc /media/floppy -o uid=1000 This will mount the floppy, but I would like this to happen automatically, so when I connect the drive to the USB port, it automatically mounts the floppy. How can I make this work? Or does Ubuntu only work with internal Floppy drives?

  Read the article

• Odd issue,Wubi Installation won't boot, when another ext4 drive is plugged?

  - by Uri Herrera

  It's an odd issue, i installed Ubuntu 11.04 trough Wubi yesterday,it actually worked unlike the last time i tried to when it didn't boot at all. But there is one thing that bugs me, see, i have 2 HDD's ,a 320GB one with Windows 7, and the other, a 500GB HDD with Ubuntu 10.10. I have partitioned the 500GB HDD, and contains a NTFS partition, and a EXT4 plus the Swap partitions. The 320GB is not partitioned, as it only has Windows 7. Since i installed Wubi on Windows 7, when i have my Ubuntu drive connected, Wubi won't boot the installation, giving me a "no wubdir" error. However, if i phisically unplug the Ubuntu drive, then Wubi boots just fine. So, how is the Ubuntu drive interfering with Wubi, to the extent of Wubi not even working when the drive is plugged?.

  Read the article

• Booting but not rebooting from external USB hard drive, what could be the problem?

  - by user8276

  I have a Dell Inspiron 6400 laptop with a dead internal hard drive controller. It boots perfectly from CD or USB. I therefore removed the internal hard drive and installed Ubuntu 10.10 Maverick onto an external USB hard drive. It boots and runs perfectly when doing a "cold start" of the PC. However, when I choose restart/reboot in the Ubuntu menu (e.g. after an update), I get this error message from the BIOS: "No bootable devices, strike f1 to retry boot, f2 for setup utility, press f5 to run onboard diagnostics". I can make the system boot again by pressing f2 or f5 and exiting the utility without having done anything. Or, I can simply power off the system and do a new "cold start". Does anyone know the likely reason for this problem and how to fix it. It is not a big issue but an annoyance that I would like to fix if possible.

  Read the article

• Ubuntu 10.10 booting but not rebooting from external USB hard drive, what could be the problem?

  - by user8276

  I have a Dell Inspiron 6400 laptop with a dead internal hard drive controller. It boots perfectly from CD or USB. I therefore removed the internal hard drive and installed Ubuntu 10.10 Maverick onto an external USB hard drive. It boots and runs perfectly when doing a "cold start" of the PC. However, when I choose restart/reboot in the Ubuntu menu (e.g. after an update), I get this error message from the BIOS: "No bootable devices, strike f1 to retry boot, f2 for setup utility, press f5 to run onboard diagnostics". I can make the system boot again by pressing f2 or f5 and exiting the utility without having done anything. Or, I can simply power off the system and do a new "cold start". Does anyone know the likely reason for this problem and how to fix it. It is not a big issue but an annoyance that I would like to fix if possible.

  Read the article

• Clone drive in Windows

  - by ERJ

  I have two 2 TB external USB hard drives, call them HD1 and HD2. HD1 is USB 2, HD2 is USB 3. Each drive contains exactly one NTFS partition. I want to clone HD1 to HD2, because it's newer and much, much faster. What's the best way to do this? I don't want to do a copy-and-paste, I want to clone the whole partition. The new drive is actually a few bytes larger, so this should be possible? I don't have a second drive that can hold the image, so it would have to clone directly to the other disk (not to a file). How can I accomplish this on Windows 7? I know about Clonezilla but I would prefer not to have to boot from a CD or anything, as I don't have the capability to do that right now. I want to know if there's a way to do this while running Windows.

  Read the article

• The BitLocker encrypted logical drive of my laptop is not accessible. On clicking error appears,"Application not found"

  - by Nauman Khan

  I had an important personal data that was stored in my laptop drive 'F'. My 4 year old son also uses my laptop to play games. To secure my data I used bitlocker software that was already there in my windows 7 ultimate 32 bit. I am using a Dell D 630 Core2Duo laptop. The thing worked fine for me and I have been able to access my data in drive 'F' as and when I required. But today, when I tried to open my 'F' drive, an error box appeared saying "Application not found". I right clicked and checked 'properties' of 'F' drive. It showed me Used Space = 0 bytes and Free Space = 0 bytes. I opened 'Disk Management' which showed my 'F' drive file system as 'Unknown (Bitlocker Encrypted). 'Disk Management' is also showing my 'F' drive as healthy logical drive. I opened 'Manage bitlocker' and found that my 'F' drive was being shown locked and 'Unlock Drive' was displayed against it, however, when i click on 'Unlock Drive', it does not function. I opened 'TPM Administration' and found an information that 'Compatible TPM cannot be found'. My bitlocker encryption was working fine which means that I had a compatible TPM in my laptop. Where has it gone? How can I enable it? Is my 'F' Drive lost forever and thus the data in there as well?

  Read the article

• Trying to retrieve data with a thermaltake blacX enclosure: Windows 7 believes the drive to be "uninitialized"

  - by Peeter Joot

  I have a laptop that won't boot. It appears to be a power problem ... laptop auto-turns-off within about 10 seconds of pressing the power button (with power buttons lighted temporarily and no display with or without external monitor). I've followed the dell troubleshooting guide which suggested reseating the memory modules and the hard drives, but that didn't help. Before trying to have the laptop serviced, I wanted to get some data off off the hard drive. I bought a thermaltake blacX enclosure, intending to use this to both use to retrieve the drive data with, and then later use as external storage. Following the instructions (insert cables, insert drive power on) goes fine, and Windows 7 on another laptop installs the device driver software. However, no drive letter shows up in 'Computer'. Under Computer-manage-storage I see the drive is there, and there's an option to "initialize" the drive. The Windows "initialize" dialog gives me the option to pick between "MBR" and "GPT" partitioning, which sounds like a good way to destroy the data on the drive. I'm thinking that I've purchased the wrong device for the job (or that my old drive is damaged). The old drive to recover info from is a Western Digital 500G/7200rpm SATA drive if that is relavent. Both the original laptop and the one I'm using for recovery are running Windows 7. Does anybody have experience with using a blacX enclosure to recover data off an already formatted drive?

  Read the article

• USB to Serial cables with CDC support

  - by Harsha

  Hi all, Are there are USB to Serial cables with CDC support? I recently bought these below mentioned cables which claims that they are CDC 1.1 complaint. However, when we received the cables on our verification we found that they were reporting vendor specific device descriptors. Manufacturer Barcode Part Number Quantity Link CABLEMAX 45643276422244 USB-1S1PQ 4 http://www.usbgear.com/USB-1S1PQ.html CABLEMAX USBG-US-232 USBG-US-232 4 linkhttp://www.usbgear.com/USBG-US-232.html linkhttp://www.made-in-china.com/showroom/trankoo/product-detailebsQoMuKExrj/China-USB-To-RS232-Cable.html Has anyone used USB to Serial cables with CDC support? Please advise! Thanks for your help.

  Read the article

• VB Script - Unmount USB drive

  - by user736887

  I have tedious project coming up. I need to insert a usb flash drive into a computer, then copy over three files to that drive, and then unmount it and repeat 3000 times (literally). I was hoping to come up with some VB Script that can reduce my input to just 1.) insert the usb and 2.) double click on the .vbs file and remove the usb flash drive. I figure it isnt too difficult to come up with the copy and paste part of the code as long as I am inserting the usb into the same port every time. Is this assumption correct? However, the real problem is unmounting/ejecting the usb drive. Is there any simple VB Script code that can accomplish this? Thank you, -Corey

  Read the article

• What's the best way to authorize a USB Key

  - by ScottCate

  We have an auto update for our software that is installed via USB key (with the auto run). If I wanted to ensure that only authorized USB Keys were used, what's the best way? Our installer is already signed, and it won't run otherwise. But I'm more wanting to inspect the USB Key for a signed installer, and if it's not there, just ignore, or even "Eject" the USB device. And I should be able to tell the difference (in code) between a usb storage device, and say a camera, or keyboard. I'm only wanting to disable non-authorized storage devices. Thank you for your ideas.

  Read the article

• Program LED with just USB port

  - by LifeH2O

  I want to control LED with C# using only USB port. I don't want to attach any other device with USB. I just want to attach LED directly to USB port pins and program it (blink etc). How can i do that? I am new to hardware programming and it will be my first program. EDIT: I can do it already (blink LED) using printer port by attaching one led pin to data pin and other to ground. How can i do the same with USB port? My motherboard does not have a printer port. USB is the only option.

  Read the article

• Need to boot into chkdsk from USB on Windows netbook

  - by Gaz Davidson

  While attempting to install Ubuntu on a 32-bit Windows XP netbook, the partition resize operation failed due to inconsistencies in the NTFS filesystem (lesson learned: run chkdsk /f in Windows before trying to resize a partition in Linux). Now the installer only gives the option to replace Windows with Ubuntu, the partition can't be resized in gparted, which displays a red exclamation mark and an error log when you click it. To make matters worse, we're also unable to reboot into Windows to get at chkdsk. We get a BSoD when choosing any of the options (including the DOS recovery console thing). The netbook has no CD-ROM drive, contains no recovery image and our only connection to the Internet is via the hotspot on my mobile device. We don't have Windows recovery CDs, but we do have a USB flash drive. We have a 64-bit laptop running Ubuntu 12.04 and Windows 7 (both 64-bit). So, on to the question: Is anyone aware of a way to get into a DOS recovery console and run chkdsk from a USB disk drive, without having to pirate Windows XP or download hundreds and hundreds of megabytes of crap? If it was my device I'd just flatten it, but it isn't. Please help!

  Read the article

• ios7 loops on the "trust this computer" dialog

  - by gcb

  trying to transfer files to the work ipad via my debian7 box. When i plug it on the computer usb port, it shows the dialog about trusting this computer, and the computer shows a gnome alert about the ipad being locked and that i should unlock it and try again. i press "trust" on the ipad and try again on gnome. and it starts again. over and over. endlessly. there are dozen threads about this on apple support forums. no solution. just dozens of "me too" flags. e.g. https://discussions.apple.com/message/23082859#23082859 (44 me-too, 2k views) here is the log/messages i get Oct 23 21:17:39 dotmatrix kernel: [ 1928.517766] usb 2-1.7: USB disconnect, device number 16 Oct 23 21:17:39 dotmatrix kernel: [ 1928.715441] usb 2-1.7: new high-speed USB device number 17 using ehci_hcd Oct 23 21:17:40 dotmatrix kernel: [ 1928.811031] usb 2-1.7: New USB device found, idVendor=05ac, idProduct=12ab Oct 23 21:17:40 dotmatrix kernel: [ 1928.811036] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 23 21:17:40 dotmatrix kernel: [ 1928.811039] usb 2-1.7: Product: iPad Oct 23 21:17:40 dotmatrix kernel: [ 1928.811041] usb 2-1.7: Manufacturer: Apple Inc. Oct 23 21:17:40 dotmatrix kernel: [ 1928.811043] usb 2-1.7: SerialNumber: fec5e0f6a6fa18a936de3c53af661051d290275e Oct 23 21:17:40 dotmatrix mtp-probe: checking bus 2, device 17: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7" Oct 23 21:17:40 dotmatrix mtp-probe: bus: 2, device: 17 was not an MTP device Oct 23 21:17:43 dotmatrix kernel: [ 1932.346505] usb 2-1.7: USB disconnect, device number 17 If i never press the trust dialog it will stay there until i remove the cable. but the logs shows that it gave up 3sec after the cable was connected.

  Read the article

• Eject a USB modem in the scheduled tasks

  - by mantra

  Hi I need to schedule a task to eject a USB modem immediately when the power fail. I had searched in EventLog and found the EventID for power Failure, put it in the Triggers,but in the Action I didn't know how to put what will eject the modem. Can anybody please help me on this, I need it urgently, because my system crash on the power failure because of the USB modem. I have a UPS but I have no suitable power cable for the modem ( couldn't find one in my country ). I run win7 Ultimate

  Read the article

• Build a RAID-5 USB Array or NAS?

  - by TK Kocheran

  I'm looking to build a RAID-5 or RAID-6 hard disk array to be used as a centralized backup location for my home network. I have a lot of 4-8GB DVD ISO files which I intend to serve over the network to my TV using DLNA or something similar. I need decent write times, fast read times, and preferably a way to connect this array to my network router over USB. I'll probably be using ext3/4 on it (I'd use btrfs if my router supported it :-[). Is there a way to build a RAID array that is accessible over USB? I'm kind of new to this and most guides assume you're running a RAID array inside your machine. I need at least 5TB of space, and I need redundancy, so I prefer RAID-6. How can I go about accomplishing this?

  Read the article

• Snow Leopard Compatible Drivers for Moschip MCS7720 USB-to-Serial Controller

  - by Kristopher Johnson

  We are using Cables Unlimited USB-2925 USB-to-Dual-DB9 serial cables, which use the Moschip MCS7720 controller. We have downloaded the newest driver from http://www.moschip.com/mcs7720.php, but that driver was last updated in 2005. It does not seem to be working with Macs running OS X 10.6 Snow Leopard. We have sent emails to the support addresses for both Cables Unlimited and Moschip. Cables Unlimited says they are checking with Moschip. No responses from Moschip yet. Does anyone know of any updates for this driver, or are there any ways to get the driver to work with Snow Leopard?

  Read the article

• Wired and Wireless USB Network Adapter

  - by Evan M.

  Does anyone know if there are any USB network adapters out there that have both wired and wireless networking capability? Far-fetched, I know, but thought I'd ask. Background: Some of our users have locked down laptops that we also include unlocked virtual machines running on VMware Player. Sometimes the users have a need for network connectivity with their VMs where NAT and bridged networking from the host won't work. To supplement this, we want to supply them with adapters that they can use VMware USB pass through capabilities to provide appropriate connectivity. They will need both wired and wireless capability. Rather than carrying around 2 adapters, was hoping we could get a combination unit so that we can reduce it to 1. Thanks

  Read the article

• Cross platform support for network attached USB hubs?

  - by larsks

  I am looking at network-attached USB hubs in order to run licensed software in a virtualized environment when hardware dongles are required. Are there any solutions that will work with both Linux and Windows? Most of the dedicated devices -- such as the Zonet ZUH2214 or the (oddly expensive) Digi AnywherUSB/2 -- appear to be Windows-only. Linux has the the USB/IP project, for which there appear to be Windows drivers, but the last "News" post on the site was in 2007, so I'm not entirely confident about the viability of the project. Has anyone out there found a solution that will work well in both environments?

  Read the article

• Gigabyte GA-P55A-UD4P won't boot from USB drive with RAID enabled

  - by Daniel Schaffer

  I've got a Windows 7 installation image on my USB hard drive, which is set up to be bootable. I know it works because I've used it on several computers, and it works on the computer I'm trying to install as long as the RAID controller is disabled. However, when I enable the RAID controller and attempt to boot from the USB driver, it hangs for 30-60 seconds and then gives me the "disk boot failure, insert system disk" error like it can't find any OS. Just for laughs, I disabled the RAID controller again and it booted fine. I'm having separate, unrelated issues burning a dvd with the ISO, so I would prefer to get this working.

  Read the article

• What is polarity for an unmarked USB hub?

  - by Feral Oink

  On my USB hub where the power supply plugs in, the polarity is unmarked (I got it used, from my brother's friend). I need to know what the polarity should be. I don't think it makes a difference about the brand. Could someone who has a USB hub tell me what the polarity markings are? This is why I need to know about the polarity: Usually the center pin is positive and the outer pin is negative. But I'm not sure with this, and want to be certain before I plug anything into it.

  Read the article

• Create Hidden Partition on USB

  - by Francesco

  I need to split an USB flash disk into two USB drives, each one with its own drive letter, but one of these has to be hidden. In the non-hidden partition I want to place my software, and in the hidden partition I need to place some files that are required by the software in order to work. Moreover, only the software may read, write, delete or execute the files in this partition. I thought to use a little partition viewed as a CD-ROM drive, as they do in many flash drives, but this solution does not allow to write other data in a second moment, and it's visible to the user that can read the file. Obviously the software must be able to access to partition and read, write, delete or execute the content. Is there a solution to do so, possibly that work also on Linux?

  Read the article

• auto copy newest folders and images in MyPictures folder to USB drive

  - by TVersmet

  I drop lots of photos in a day into the My Documents/My Pictures folder. I archive at the end of each day to USB drives, to be stored offsite. What I would like is someway to automate the process. By example, a small app or script I can simply double-click and it will scan the My Pictures folder for the newest folders and images and copy them to the USB drive until the drive is full. It doesn't matter if I get redundancy from the previous days saved images, so long as the newest images and folders are always the first to get copied. Well, that's my request. Thanks for reading.

  Read the article

• Booting from a USB

  - by Nish

  Will booting linux (slitaz) from my USB drive damage my original OS (windows vista)?

  Read the article

• Prepare bootable Mac OS install usb on Windows

  - by Dave

  Hello, Is there any software out there that can simulate Disk Utility (Mac app) for Windows? I need to reinstall leopard on my Mac because I screwed something up on the current OS. The thing is, the DVD drive is broken on there, so I need to prepare a bootable USB drive from my Leopard DMG file. This is easily done with the Disk Utility app on the Mac. But seeing how my cannot even log on to my Mac right now, I don't know how to prepare that USB stick. The only other machine I have is a PC with Windows 7. If anyone has any suggestion, please help me out! Thanks so much!

  Read the article

• USB drive gets infected every time I plug it into my laptop

  - by ashwnacharya

  Whenever I plug in my USB flash drive into my laptop running Windows XP, an AutoRun.inf file gets created inside it. Also a hidden folder called "Cache" which uses the Recycle bin icon gets created. AutoRUn.inf file cannot be opened in Windows. Both the Autorun.inf file and the "Cache" folder cannot be deleted. I opened the AutoRun.inf file using Ubuntu. I saw that it is trying to run a file Cache\TMP983.exe. I ran all anti-spywares, anti-malwares, anti-viruses, USB autorun eaters, but to no avail. How do I fix this?

  Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >