Search Results

Search found 15383 results on 616 pages for 'home automation'.

Page 490/616 | < Previous Page | 486 487 488 489 490 491 492 493 494 495 496 497  | Next Page >

• In Rails models; for symbols get automatically converted to YAML when saving to DB. What is the corr

  - by Ram

  In my model example Game, has a status column. But I usually set status by using symbols. Example self.status = :active MATCH_STATUS = { :betting_on => "Betting is on", :home_team_won => "Home team has won", :visiting_team_won => "Visiting team has one", :game_tie => "Game is tied" }.freeze def viewable_status MATCH_STATUS[self.status] end I use the above Map to switch between viewable status and viceversa. However when the data gets saved to db, ActiveRecord appends "--- " to each status. So when I retrieve back the status is screwed. What should be the correct approach?

  Read the article

• VirtualBox snapshots

  - by CodeMedic

  Heres what happened. I had a snapshot on which I was working from within a linux VM. A friend requested a clean VM as a clone of mine. So I closed / shutdown my running VM, made a copy of the Disk1.vdi along with the snapshots ({uuid}.vdi). Then I restarted the VM and did merged snapshots, deleted my home directory and made a tar+bz2 for my friend. Then after I restored my backups, I am not able to mount my snapshot. The VM seems to boot from my version before snapshot. I cant seem to find a way to mount back my snapshot. Any idea how to make VirtualBox see the snapshot and mount it?

  Read the article

• Does /boot safe on top of a lvm LV (logical volume)?

  - by fantoman

  Title already asked the question. More specifically, I read in some documents that logical volumes are nice in general but not for /boot in a linux system. They say that bootloaders don't understand LVM volumes, so create a separate partition for /boot out of lvm. I recently installed Ubuntu server (9.10) for my home server, but by default /boot is created in the LVM. Everything is fine now, but I am not sure it is safe to use /boot in LVM. Second question is do I really need a physical partition (volume)(pv) for /boot or is it equally fine if I put it into a logical volume (lv) on top of a single shared volume group. Thanks in advance.

  Read the article

• Django development server serving css but not js

  - by Wisco crew

  I am developing a django (1.4) app on my local machine. I am running the built-in development server with python manage.py runserver. In base.html I have: <link href="{{ STATIC_URL }}bootstrap.css" rel="stylesheet" type="text/css" /> <script src="{{ STATIC_URL }}boostrap-dropdown.js" type="text/javascript"></script> boostrap.css loads just fine when I load a page, but bootstrap-dropdown.js is 404'd. They are sitting right next to each other in my static directory. Relevant parts of settings.py: STATIC_URL = '/static/' STATICFILES_DIRS = ( '/home/username/projects/projectname/static',) Debug is set to True. I have tried it both with and without the staticfiles_urlpatterns trick. Django can find one file in the directory but not the other? I think I'm going crazy.

  Read the article

• Reboot windows machines at a certain time of day and automatically login with Python

  - by Tom

  I know how to reboot machines remotely, so that's the easy part. However, the complexity of the issue is trying to setup the following. I'd like to control machines on a network for after-hours use such that when users logoff and go home, or shutdown their computers, whatever, python or some combination of python + windows could restart their machines (for cleanliness) and automatically login, running a process for the night, then in the morning, stop said process and restart the machine so the user could easily login like normal. I've looked around, haven't had too terribly much luck, though it looks like one could do it with a changing of the registry. That sounds like a rough idea though, modifying the registry on a per-day basis. Is there an easier way?

  Read the article

• Extending folder (LiveFolder?) class

  - by yamsha

  So, I noticed that I can organize apps into folders (HTC Incredible). However these folders are fairly limited in their capabilities. I want to implement an activity that extends the "base" folder activity (at the very least I want to add the ability to rearrange items in folders), but I can't figure out the class name... So, what's the name of the class that is used when adding a "New Folder" to the Home screen? PS I did take a look at the Android developer website. But the discussion there revolves mostly around content providers. I assume that's not quite what I need since I'd have to create a separate content provider for each new folder, or am I misunderstanding something?

  Read the article

• C++ array of classes

  - by nickik

  I working on a game but I have a problem with the initialization of the level. (feld is just field in german) class level{ private: feld spielfeld[10][10]; public: /* other staff */ void init_feld(); }; void level::init_feld() { for(int i=0;i!=10;i++){ for(int n=0;n!=10;n++){ spielfeld[i][n] = new feld(land, i, n); } } } The Error: Error: no match for »operator=« in »((level*)this)-level::spielfeld[i][n] = (operator new(24u), (, ((feld*))))« /home/nick/stratego/feld.h:18:11: Remark: candidate is: feld& feld::operator=(const feld&) Process terminated with status 1 (0 minutes, 0 seconds) 2 errors, 0 warnings

  Read the article

• .Htaccess & Wildcard Subdomains — Can't get other variables to work!

  - by Justin Scheetz

  It would be absolutely awesome if someone could help me out here. I have a domain, let's call it "example.com". I have wildcard subdomains setup and working great. The only problem is I can't get htaccess to see anything else like subdomain.example.com/profile/some_name/some_id_number/. In fact, I can type any garbage after the domain and it will still just show me the home screen. Here's what's in my htaccess file now: Options +FollowSymLinks Options +Indexes Options -Multiviews RewriteEngine On RewriteCond %{REQUEST_URI} !^/app/index.php RewriteCond %{HTTP_HOST} !^www\.example\.com RewriteCond %{HTTP_HOST} ^([^.]+)\.example\.com RewriteRule (.*) /app/index.php?user%1 [L] I can see why that wouldn't work yet, but I wanted to add something similar to the following: RewriteRule ^profile/([^/]+)/([^/]+) /app/index.php?page=profile&username=$1&user_id=$2 [nc] But it's not working at all. The server doesn't even really show signs that it's even seeing it there. Any ideas?

  Read the article

• Problem with fetching table to array

  - by jasmine

  I have writed this function: function news_array() { $sql = "SELECT * FROM content WHERE home=1"; $query = mysql_query($sql); $i = 0; while($row = mysql_fetch_array($query)){ $row_array[$i] = array( TITLE => $row['title'], ABSTRACTT => $row['abstract'], BODY => $row['body'], ID => $row['conID'] ); $i++; } return $row_array; } When using this function like this: <?php $row_array = news_array(); for($i = 0 ; $i < count($row_array) ; $i++){ echo $row_array[$i][TITLE]; } ?> There no output in html. What is wrong in my function? Thanks in advance

  Read the article

• Firefox back issue

  - by wikiz

  Hello, I am using a menu that switches from standard state to select state for an item by reading the current url var where = document.location.href; My issue is that when using Firefox, if I switch to some items from the menu (for instance, I click home, donwload, contact) and press the back button the url is not read correctly so 2 items remain on the selected state. This only happens in Firefox (I've tested already in Explorer, Chrome and Opera) So what I'm trying to ask: is there a way to handle the so called back button action in/for Firefox so I can fix my menu issue ?

  Read the article

• iPhone App on iPad - What is the extra effort?

  - by hol

  I started to develop an iPhone App for a client but the binary not yet submitted to Apple. My client asked me whether they can run the iPhone App also on the iPad. I am not sure what to answer. I am away from home and cannot even check how this all works in XCode. I wonder whether I have to submit two binaries two Apple - one for iPhone and one for iPad - or how this all works? If somebody with experience can explain me. Basically I need to figure out how much more effort I have to consider if it is only making the app work on the iPad. I do not mean the effort to redesign the whole app being a real "iPad app". Just to make it work and when somebody downloads the app and it can be for an iPhone and for an iPad and it does not matter.

  Read the article

• Redis suggesstion for selecting data type

  - by PHP Connect

  We have questions based where in home page we were showing 2 list Questions by date modified Question have bigger views and ans count. And in this both listing if question have same views or ans count then sorting is based on date. Previously i am directly quiring to MySQL database and fetching the values so it's easy. But each page request hitting to MySQL it's bit expensive then start doing caching. I started using Redis. Following is the cases when i use redis cache Issues is On second listing i have to display questions by votes and not answered combine. How can i stored this type of data in redis to load faster with sorting based by 2 conditions votes with time and ans count with time?

  Read the article

• Why doesn't this require_once statement find the file? (PHP)

  - by ggfan

  I not sure what's going on..maybe I missed something simple. In my connectvars.php file, I connect to the database using the variables in my config.php folder. Here's the hierarchy: admin(folder) config.php includes(folder) connectvars.php I want to get information from config.php to use in connectvars.php, so I use: require_once("../admin/config.php"); But everytime I do this I get Warning: require_once(../admin/config.php) [function.require-once]: failed to open stream: No such file or directory in /home/a8879415/public_html/includes/connectvars.php on line 2 BUT when I type: require_once("admin/config.php");, it works. I thought I had to go up a level, then go down to admin, then get config.php. So how come I just need to go into the admin folder then get config.php?

  Read the article

• php: possible to convert array of numbers to 'from' and 'to' pairs where consecutive?

  - by Haroldo

  I have an array of timestamps referring to the days when a holiday home is booked. each timestamp is a round day. I want to turn this into an array of 'begins' and 'ends' pairs for consecutive dates Are there any php functions I should be aware of for writing this function? Or does anyone have any pointers for this kind of thing? thanks! edit: example array: Array ( [0] => 1273536000 [1] => 1273622400 [2] => 1273708800 [3] => 1273795200 [4] => 1273881600 [5] => 1273968000 [6] => 1274054400 [7] => 1274140800 [8] => 1274227200 ) where a day = 86400 (seconds)

  Read the article

• Add the view controller in the TabBarController from within one of its viewControllers ?

  - by user550001

  Hi, I am new to iPhone/iPad Developer. I am developing a application using UITabBarController. I have created a tabbarcontroller class in which i have implemented a UITabBarController object through NIB file. there is 4 tab as LoginPage, Category Page, About Us Page, Setting Page. I want to add logout tab in tabbarcontroller after login in Login Page by programmatically and when user will click to logout tab then it back to home/login screen and logout tab will eliminate. So i need a code snippet to add TabBar Item in UITabBarController within its View Controller. Thank you in advance

  Read the article

• iOS Display Different Image on Click

  - by user1506841

  Using XCode, I am trying to figure out how to display a different image when someone clicks or presses down on one of my buttons before being taken to a second screen. For example, I have a contact icon on my home screen. When a user clicks the icon, it should change to a darker version on tap before going to the contact screen. Any help is appreciated. -(IBAction) ButtonPressed :(id)sender { UIButton *tempButton = (UIButton *) sender; int tag = tempButton.tag; NSString *viewName; switch (tag) { case 1: [FlurryAnalytics logEvent:@"Contact-Screen"]; viewName = @"ContactScreen"; if( self.appDelegate.sound) [Click play]; [self.appDelegate moveToView:viewName]; break; } }

  Read the article

• php: parse error on mysql query

  - by dwstein

  I'm getting the following error: Parse error: syntax error, unexpected T_VARIABLE in /home/a4999406/public_html/willingLog.html on line 48 on the following code (line 48 is first row of this code): $rows = mysql_num_rows($result); for ($j=0; $j<$rows: ++$j) { echo 'ID: ' . mysql_result($result, $j, 'id') . '<br />'; echo 'First: ' . mysql_result($result, $j, 'first') . '<br />'; echo 'Last: ' . mysql_result($result, $j, 'last') . '<br />'; echo 'Email: ' . mysql_result($result, $j, 'email') . '<br />'; } Anyone know what i'm doing wrong?

  Read the article

• xhtml to Wordpress?

  - by user1762554

  I am in the process of learning xhtml/html5/PHP, and I have grasped the majority of the concepts of these languages. What I do not understand is if I have multiple pages in xhtml such as home(index)html, about.html, blog.html, etc., do I need to convert all of those pages to php files? I've downloaded a few templates from the web to look at the php files, but in the template folder there is no individual files for the menu categories, just the usual .php files for created a wp theme. Why is this?

  Read the article

• how to recieve mail using python>

  - by user600950

  Hey everyone, I am trying to make a program on my computer at home that will constantly check a certain gmail address. The purpose being the only email this adress recieves is from me. I would just like to be able to 1.Check for mail 2.Download mail(presumably to a string, though a file is acceptable) and 3. delete the mail from the web server but keep it on my computer. Thta is all i need to know right now, however my long term goal is to set up kind of a remote terminal over email, so that wherever i have email i have a certain amount of control over my computer.

  Read the article

• read integers from a file into a vector in C++

  - by user2922063

  I am trying to read an unknown number of double values stored on separate lines from a text file into a vector called rainfall. My code won't compile; I am getting the error no match for 'operator>>' in 'inputFile >> rainfall' for the while loop line. I understand how to read in from a file into an array, but we are required to use vectors for this project and I'm not getting it. I appreciate any tips you can give on my partial code below. vector<double> rainfall; // a vector to hold rainfall data // open file ifstream inputFile("/home/shared/data4.txt"); // test file open if (inputFile) { int count = 0; // count number of items in the file // read the elements in the file into a vector while ( inputFile >> rainfall ) { rainfall.push_back(count); ++count; } // close the file

  Read the article

• Too many apache processes, killing the CPU

  - by RULE101

  I am noticed that too many apache processes killing the CPU in my dedicated server. 14193 (Trace) (Kill) nobody 0 66.1 0.0 /usr/local/apache/bin/httpd -k start -DSSL 14128 (Trace) (Kill) nobody 0 65.9 0.0 /usr/local/apache/bin/httpd -k start -DSSL 14136 (Trace) (Kill) nobody 0 65.9 0.0 /usr/local/apache/bin/httpd -k start -DSSL 14129 (Trace) (Kill) nobody 0 65.8 0.0 /usr/local/apache/bin/httpd -k start -DSSL 13419 (Trace) (Kill) nobody 0 65.7 0.0 /usr/local/apache/bin/httpd -k start -DSSL 13421 (Trace) (Kill) nobody 0 65.7 0.0 /usr/local/apache/bin/httpd -k start -DSSL 13426 (Trace) (Kill) nobody 0 65.7 0.0 /usr/local/apache/bin/httpd -k start -DSSL 13428 (Trace) (Kill) nobody 0 65.7 0.0 /usr/local/apache/bin/httpd -k start -DSSL 13429 (Trace) (Kill) nobody 0 65.7 0.0 /usr/local/apache/bin/httpd -k start -DSSL 12173 (Trace) (Kill) nobody 0 65.5 0.0 /usr/local/apache/bin/httpd -k start -DSSL 14073 (Trace) (Kill) nobody 0 65.5 0.0 /usr/local/apache/bin/httpd -k start -DSSL I am getting high load email notification from cpanel during the day. FROM httpd.conf Include "/usr/local/apache/conf/includes/pre_main_global.conf" Include "/usr/local/apache/conf/includes/pre_main_2.conf" LoadModule bwlimited_module modules/mod_bwlimited.so LoadModule h264_streaming_module /usr/local/apache/modules/mod_h264_streaming.so AddHandler h264-streaming.extensions .mp4 Include "/usr/local/apache/conf/php.conf" Include "/usr/local/apache/conf/includes/errordocument.conf" ErrorLog "logs/error_log" ScriptAliasMatch ^/?controlpanel/?$ /usr/local/cpanel/cgi-sys/redirect.cgi ScriptAliasMatch ^/?cpanel/?$ /usr/local/cpanel/cgi-sys/redirect.cgi ScriptAliasMatch ^/?kpanel/?$ /usr/local/cpanel/cgi-sys/redirect.cgi ScriptAliasMatch ^/?securecontrolpanel/?$ /usr/local/cpanel/cgi-sys/sredirect.cgi ScriptAliasMatch ^/?securecpanel/?$ /usr/local/cpanel/cgi-sys/sredirect.cgi ScriptAliasMatch ^/?securewhm/?$ /usr/local/cpanel/cgi-sys/swhmredirect.cgi ScriptAliasMatch ^/?webmail/?$ /usr/local/cpanel/cgi-sys/wredirect.cgi ScriptAliasMatch ^/?whm/?$ /usr/local/cpanel/cgi-sys/whmredirect.cgi RewriteEngine on AddType text/html .shtml Alias /akopia /usr/local/cpanel/3rdparty/interchange/share/akopia/ Alias /bandwidth /usr/local/bandmin/htdocs/ Alias /img-sys /usr/local/cpanel/img-sys/ Alias /interchange /usr/local/cpanel/3rdparty/interchange/share/interchange/ Alias /interchange-5 /usr/local/cpanel/3rdparty/interchange/share/interchange-5/ Alias /java-sys /usr/local/cpanel/java-sys/ Alias /mailman/archives /usr/local/cpanel/3rdparty/mailman/archives/public/ Alias /pipermail /usr/local/cpanel/3rdparty/mailman/archives/public/ Alias /sys_cpanel /usr/local/cpanel/sys_cpanel/ ScriptAlias /cgi-sys /usr/local/cpanel/cgi-sys/ ScriptAlias /mailman /usr/local/cpanel/3rdparty/mailman/cgi-bin/ <Directory "/"> AllowOverride All Options All </Directory> <Directory "/usr/local/apache/htdocs"> Options All AllowOverride None Require all granted </Directory> <Files ~ "^error_log$"> Order allow,deny Deny from all Satisfy All </Files> <Files ".ht*"> Require all denied </Files> <IfModule log_config_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common CustomLog "logs/access_log" common <IfModule logio_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> </IfModule> <IfModule alias_module> ScriptAlias /cgi-bin/ "/usr/local/apache/cgi-bin/" </IfModule> <Directory "/usr/local/apache/cgi-bin"> AllowOverride None Options All Require all granted </Directory> <IfModule mime_module> TypesConfig conf/mime.types AddType application/x-compress .Z AddType application/x-gzip .gz .tgz </IfModule> <IfModule prefork.c> Mutex default mpm-accept </IfModule> <IfModule mod_log_config.c> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent CustomLog logs/access_log common </IfModule> <IfModule worker.c> Mutex default mpm-accept </IfModule> # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # Direct modifications to the Apache configuration file may be lost upon subsequent regeneration of the # # configuration file. To have modifications retained, all modifications must be checked into the # # configuration system by running: # # /usr/local/cpanel/bin/apache_conf_distiller --update # # To see if your changes will be conserved, regenerate the Apache configuration file by running: # # /usr/local/cpanel/bin/build_apache_conf # # and check the configuration file for your alterations. If your changes have been ignored, then they will # # need to be added directly to their respective template files. # # # # It is also possible to add custom directives to the various "Include" files loaded by this httpd.conf # # For detailed instructions on using Include files and the apache_conf_distiller with the new configuration # # system refer to the documentation at: http://www.cpanel.net/support/docs/ea/ea3/customdirectives.html # # # # This configuration file was built from the following templates: # # /var/cpanel/templates/apache2/main.default # # /var/cpanel/templates/apache2/main.local # # /var/cpanel/templates/apache2/vhost.default # # /var/cpanel/templates/apache2/vhost.local # # /var/cpanel/templates/apache2/ssl_vhost.default # # /var/cpanel/templates/apache2/ssl_vhost.local # # # # Templates with the '.local' extension will be preferred over templates with the '.default' extension. # # The only template updated by the apache_conf_distiller is main.default. # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # PidFile logs/httpd.pid # Defined in /var/cpanel/cpanel.config: apache_port Listen 0.0.0.0:80 User nobody Group nobody ExtendedStatus On ServerAdmin [email protected] ServerName server.powerlabel.net LogLevel warn # These can be set in WHM under 'Apache Global Configuration' Timeout 300 ServerSignature On <IfModule prefork.c> </IfModule> RewriteEngine on RewriteMap LeechProtect prg:/usr/local/cpanel/bin/leechprotect Mutex file:/usr/local/apache/logs rewrite-map <IfModule !mod_ruid2.c> UserDir public_html </IfModule> <IfModule mod_ruid2.c> UserDir disabled </IfModule> # DirectoryIndex is set via the WHM -> Service Configuration -> Apache Setup -> DirectoryIndex Priority DirectoryIndex index.html.var index.htm index.html index.shtml index.xhtml index.wml index.perl index.pl index.plx index.ppl index.cgi index.jsp index.js index.jp index.php4 index.php3 index.php index.phtml default.htm default.html home.htm index.php5 Default.html Default.htm home.html # SSLCipherSuite can be set in WHM under 'Apache Global Configuration' SSLPassPhraseDialog builtin SSLUseStapling on SSLStaplingCache shmcb:/usr/local/apache/logs/stapling_cache_shmcb(256000) SSLSessionCache shmcb:/usr/local/apache/logs/ssl_gcache_data_shmcb(1024000) SSLSessionCacheTimeout 300 Mutex file:/usr/local/apache/logs ssl-cache SSLRandomSeed startup builtin SSLRandomSeed connect builtin # Defined in /var/cpanel/cpanel.config: apache_ssl_port Listen 0.0.0.0:443 AddType application/x-x509-ca-cert .crt AddType application/x-pkcs7-crl .crl AddHandler cgi-script .cgi .pl .plx .ppl .perl AddHandler server-parsed .shtml AddType text/html .shtml AddType application/x-tar .tgz AddType text/vnd.wap.wml .wml AddType image/vnd.wap.wbmp .wbmp AddType text/vnd.wap.wmlscript .wmls AddType application/vnd.wap.wmlc .wmlc AddType application/vnd.wap.wmlscriptc .wmlsc <Location /whm-server-status> SetHandler server-status Order deny,allow Deny from all Allow from 127.0.0.1 </Location> # SUEXEC is supported Include "/usr/local/apache/conf/includes/pre_virtualhost_global.conf" Include "/usr/local/apache/conf/includes/pre_virtualhost_2.conf" What can cause this and how can i fix it ?

  Read the article

• My computer freezes irregularly

  - by Manhim

  My computer started to freeze at irregular times for 3 weeks now. Please note that this question change with each things that i try. (For additional details) What happens My computer freezes, the video stops. (No graphic glitches, it just stops) Sound keeps playing up to some time (Usually 10-30 seconds) then stops playing. Sometimes, randomly, the screen on my G-15 keyboard flickers and I see caracters not at the right places. Usually happens for about 1-2 seconds and a bit before my computer freezes. I have to keep the power button pressed for 4 seconds to shut my computer down. I still hear my hard drives and fans working. Sometimes it works with no problems for a full day, some other times it just keeps freezing each time I restart my computer and I have to leave it for the rest of the day. Sometimes my mouse freezes for a fraction of a second (Like 0.01 to 0.2 seconds) quite randomly, usually before it freezes. No errors spotted by the "Action center" unlike when I had problems with my last video card on this system (Driver errors). My G-15 LCD screen also freezes. Sometimes my G-15 LCD screen flickers and caracters gets caried around temporary under heavy load. Now, most of the times, the BIOS hard disks boot order gets reversed for some reason and I have to put it to the right one and save each times I boot. (Might be unrelated, not sure, but it first started yesterday) Sometimes the BIOS doesn't detect my 750GB hard drive plugged in SATA1. What I did so far I have had similar problems in the past and I had changed my hard drive (It was faulty), so I tested my software RAID-0 array and it was faulty so I changed it. (I reinstalled Windows 7 with this part). I also tested with unplugging my secondary hard drive. My CPU was running at about 100 degree Celsius, I removed the dust between the fans and the heatsink and it's now between 45-55. I ran a CPU stress-test and it didn't freeze during the tests (using Prime95 on all cores) Ran a memory test (using memtest86+) for a single pass and there were no errors. Ran a GPU stress test with ati-tools and furmark and it didn't freeze during the tests. (No artefacts either) I had troubles with my graphic card when I got it, but I think that it got fixed with a driver update. I checked the voltages in my BIOS setup and they all seemed ok (±0.2 I think). I have ran on the computer without problems with Fedora 15 on an external hard drive (Appart that it couldn't load Gnome 3 and was reverting to Gnome 2, didn't want to install drivers since I use it on multiple computers) I used it to backup my files from the raid array to my 1TB hard drive for the reinstallation of Windows. (So the crashes only happenned on Windows) [The external hard drive is plugged directly on a SATA port] I contacted EVGA (My graphic card vendor) and pointed them on this question, I'm looking for an answer. Ran sensors on Fedora 15 and got this output: http://pastebin.com/0BHJnAvu Ran 6 short different CPU stress test on Fedora 15 (Haven't found any complete stress testers for Linux) and it didn't crash. Changed the thermal paste to some Artic Silver 5 for my CPU and stress tested the CPU, temperature was at 50 idle, then 64 highest and slowly went down to 62 during the test. Ran some stress testing with a temporary graphic card and it went ok. Ran furmark stress test with my original graphic card and it freezed again. GPU had a temp of 74C, a CPU temp of 58C and a mobo temp of 40C or 45C (Dunno which one it is from SpeedFan). Ran a furmark stress test and a CPU stress test at the same time, results: http://pastebin.com/2t6PLpdJ I have been using my computer without stressing it for about 2 hours now and no crashes yet. I also have disabled the AMD Cool'n'quiet function on the BIOS for a more regular power to the CPU. When I ran Furmark without C'n'q my computer didn't freeze but I had a "Driver Kernel Error" that have recovered (And Furmark crashed) all that while running a CPU stress test. The computer eventually frozed without me being at it, but this time my screen just went on sleep and I couldn't wake it. Using the stability tester in nTune my computer freezed again (In the same manner as before). I notived that Speedfan gives me a -12V of -16.97V and a -5V of -8.78V. I wonder if these numbers are reliable and if they are good or bad. I have swapped my G-15 with another basic USB keyboard (HP) and I have ran furmark for about 10 minutes with a CPU stability test running each 60 seconds for 30 seconds and my computer haven't crashed yet. Ran some more extended tests without my G-15 and it freezed like it usually do. Removed the nForce Hard disk controler. Disabled command queuing in the NVIDIA nForce SATA Controller for both port 0 and port 1 (Errors from the logs) Used CPUID HwMonitor, here are the voltages: http://pastebin.com/dfM7p4jV Changed some configurations in the motherboard BIOS: Disabled PEG Link Mode, Changed AI Tuning to Standard, Disabled the 1394 Controller, Disabled HD Audio, Disabled JMicron RAID controller and Disabled SATA Raid. When it happens When I play video games (Mostly) When I play flash games (Second most) When I'm looking at my desktop background (It rarely happens when I have a window open, but it does, sometimes) When my Graphic card and my CPU are stressed. Sometimes when my Graphic card is stressed. Never happenned while stressing only the CPU. Sometimes when my CPU is stressed. Specs Windows Seven x64 Home Premium Motherboard: M2N-SLI Deluxe CPU: AMD Phenom 9950 x2 @ 2.6GHz Memory: Kingston 4x2GB Dual Channel (Pretty basic memory sticks) Hard drives: Was 2x250GB (Western digital caviar) in raid-0 + 1TB (WD caviar black), I replaced the raid array with a 750GB (WD caviar black) [Yes I removed the array from the raid configurations] 750W Power supply No overcloking. Ever. There have been some power-downs like 4-5 weeks ago, but the problem didn't start immediately after. (I wasn't home, so my computer got shut-down) Event logs (Warnings, errors and critical errors) for the last 24 hours: http://pastebin.com/Bvvk31T7 My current to-try list Reinstall the drivers and software 1 by 1 and do extensive stress testing between each. Update the BIOS firmware to the most recent stable one. Change my motherboard. Status updates Keeping only the last 3 (28/06 04pm) More stress testing and still pass the tests. (28/06 03pm) Been stress testing for 10 minute straight now and 5 minutes with both CPU and GPU being stressed at the same time. (28/06 03pm) Stress-testing right now, so far no problems. A little hope Tests with Furmark and Prime95. Testing Windows bare-bone: 30 Minutes stress, no freeze. Installing an Anti-virus and some software, restarting computer. Testing with Anti-virus and some software (No drivers installed): 30 Minutes stress, no freeze. Installing audio drivers, restarting computer. Testing with the audio drivers: 30 Minutes stress, no freeze. Installing the latest graphic drivers from EVGA's website (without 3d vision since I don't use it), restarting computer. Testing with the graphic drivers: 30 Minutes stress, no freeze. Configuring Windows to my liking and installing more softwares. In this situation, how can I successfully pin-point the current hardware problem? (If it's a hardware problem) Because I don't really have the budget to just forget and replace everything. I also don't really have hardware to test-replace current hardware.

  Read the article

• apt-get update mdadm scary warnings

  - by user568829

  Just ran an apt-get update on one of my dedicated servers to be left with a relatively scary warning: Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-2.6.26-2-686-bigmem W: mdadm: the array /dev/md/1 with UUID c622dd79:496607cf:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. W: mdadm: the array /dev/md/2 with UUID 24120323:8c54087c:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. W: mdadm: the array /dev/md/6 with UUID eef74de5:9267b2a1:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. W: mdadm: the array /dev/md/5 with UUID 5d45b20c:04d8138f:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. As instructed I inspected the output of /usr/share/mdadm/mkconf and compared with /etc/mdadm/mdadm.conf and they are quite different. Here is the /etc/mdadm/mdadm.conf contents: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays ARRAY /dev/md0 level=raid1 num-devices=2 UUID=b93b0b87:5f7c2c46:0043fca9:4026c400 ARRAY /dev/md1 level=raid1 num-devices=2 UUID=c0fa8842:e214fb1a:fad8a3a2:28f2aabc ARRAY /dev/md2 level=raid1 num-devices=2 UUID=cdc2a9a9:63bbda21:f55e806c:a5371897 ARRAY /dev/md3 level=raid1 num-devices=2 UUID=eca75495:9c9ce18c:d2bac587:f1e79d80 # This file was auto-generated on Wed, 04 Nov 2009 11:32:16 +0100 # by mkconf $Id$ And here is the out put from /usr/share/mdadm/mkconf # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays ARRAY /dev/md1 UUID=c622dd79:496607cf:c230666b:5103eba0 ARRAY /dev/md2 UUID=24120323:8c54087c:c230666b:5103eba0 ARRAY /dev/md5 UUID=5d45b20c:04d8138f:c230666b:5103eba0 ARRAY /dev/md6 UUID=eef74de5:9267b2a1:c230666b:5103eba0 # This configuration was auto-generated on Sat, 25 Feb 2012 13:10:00 +1030 # by mkconf 3.1.4-1+8efb9d1+squeeze1 As I understand it I need to replace the four lines that start with 'ARRAY' in the /etc/mdadm/mdadm.conf file with the different four 'ARRAY' lines from the /usr/share/mdadm/mkconf output. When I did this and then ran update-initramfs -u there were no more warnings. Is what I have done above correct? I am now terrified of rebooting the server for fear it will not reboot and being a remote dedicated server this would certainly mean downtime and possibly would be expensive to get running again. FOLLOW UP (response to question): the output from mount: /dev/md1 on / type ext3 (rw,usrquota,grpquota) tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type tmpfs (rw,mode=0755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620) /dev/md2 on /boot type ext2 (rw) /dev/md5 on /tmp type ext3 (rw) /dev/md6 on /home type ext3 (rw,usrquota,grpquota) mdadm --detail /dev/md0 mdadm: md device /dev/md0 does not appear to be active. mdadm --detail /dev/md1 /dev/md1: Version : 0.90 Creation Time : Sun Aug 14 09:43:08 2011 Raid Level : raid1 Array Size : 31463232 (30.01 GiB 32.22 GB) Used Dev Size : 31463232 (30.01 GiB 32.22 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Sat Feb 25 14:03:47 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : c622dd79:496607cf:c230666b:5103eba0 Events : 0.24 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1 mdadm --detail /dev/md2 /dev/md2: Version : 0.90 Creation Time : Sun Aug 14 09:43:09 2011 Raid Level : raid1 Array Size : 104320 (101.89 MiB 106.82 MB) Used Dev Size : 104320 (101.89 MiB 106.82 MB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Sat Feb 25 13:20:20 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 24120323:8c54087c:c230666b:5103eba0 Events : 0.30 Number Major Minor RaidDevice State 0 8 2 0 active sync /dev/sda2 1 8 18 1 active sync /dev/sdb2 mdadm --detail /dev/md3 mdadm: md device /dev/md3 does not appear to be active. mdadm --detail /dev/md5 /dev/md5: Version : 0.90 Creation Time : Sun Aug 14 09:43:09 2011 Raid Level : raid1 Array Size : 2104448 (2.01 GiB 2.15 GB) Used Dev Size : 2104448 (2.01 GiB 2.15 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 5 Persistence : Superblock is persistent Update Time : Sat Feb 25 14:09:03 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 5d45b20c:04d8138f:c230666b:5103eba0 Events : 0.30 Number Major Minor RaidDevice State 0 8 5 0 active sync /dev/sda5 1 8 21 1 active sync /dev/sdb5 mdadm --detail /dev/md6 /dev/md6: Version : 0.90 Creation Time : Sun Aug 14 09:43:09 2011 Raid Level : raid1 Array Size : 453659456 (432.64 GiB 464.55 GB) Used Dev Size : 453659456 (432.64 GiB 464.55 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 6 Persistence : Superblock is persistent Update Time : Sat Feb 25 14:10:00 2012 State : active Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : eef74de5:9267b2a1:c230666b:5103eba0 Events : 0.31 Number Major Minor RaidDevice State 0 8 6 0 active sync /dev/sda6 1 8 22 1 active sync /dev/sdb6 FOLLOW UP 2 (response to question): Output from /etc/fstab /dev/md1 / ext3 defaults,usrquota,grpquota 1 1 devpts /dev/pts devpts mode=0620,gid=5 0 0 proc /proc proc defaults 0 0 #usbdevfs /proc/bus/usb usbdevfs noauto 0 0 /dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0 /dev/dvd /media/dvd auto ro,noauto,user,exec 0 0 # # # /dev/md2 /boot ext2 defaults 1 2 /dev/sda3 swap swap pri=42 0 0 /dev/sdb3 swap swap pri=42 0 0 /dev/md5 /tmp ext3 defaults 0 0 /dev/md6 /home ext3 defaults,usrquota,grpquota 1 2

  Read the article

• Trouble connecting to vsftpd on ubuntu server

  - by littleK

  I have installed Ubuntu Server 10.10 and I am using it to host a domain that I have. I am trying to set up FTP for the server, but I am running into some problems. I have successfully installed vsFTPd and I have opened up ports 20, 21 on my firewall. In my vsFTPd configuration, I have enabled SSL. Every time I try to connect to my server via FTP, I receive a "Connection Refused" error. I have had a little more success with SSL disabled, however the connection process will time out after the LIST command (but it does accept my authentication). Here is my vsFTPd configuration, the SSL stuff is at the bottom: # Example config file /etc/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # # Run standalone? vsftpd can run either from an inetd or as a standalone # daemon started from an initscript. listen=YES # # Run standalone with IPv6? # Like the listen parameter, except vsftpd will listen on an IPv6 socket # instead of an IPv4 one. This parameter and the listen parameter are mutually # exclusive. #listen_ipv6=YES # # Allow anonymous FTP? (Disabled by default) anonymous_enable=NO # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) #local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. #anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # If enabled, vsftpd will display directory listings with the time # in your local time zone. The default is to display GMT. The # times returned by the MDTM FTP command are also affected by this # option. use_localtime=YES # # Activate logging of uploads/downloads. xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # You may override where the log file goes if you like. The default is shown # below. #xferlog_file=/var/log/vsftpd.log # # If you want, you can have your log file in standard ftpd xferlog format. # Note that the default log file location is /var/log/xferlog in this case. #xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd.banned_emails # # You may restrict local users to their home directories. See the FAQ for # the possible risks in this before using chroot_local_user or # chroot_list_enable below. #chroot_local_user=YES # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_local_user=YES #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd.chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # Debian customization # # Some of vsftpd's settings don't fit the Debian filesystem layout by # default. These settings are more Debian-friendly. # # This option should be the name of a directory which is empty. Also, the # directory should not be writable by the ftp user. This directory is used # as a secure chroot() jail at times vsftpd does not require filesystem # access. secure_chroot_dir=/var/run/vsftpd/empty # # This string is the name of the PAM service vsftpd will use. pam_service_name=vsftpd # # This option specifies the location of the RSA certificate to use for SSL # encrypted connections. rsa_cert_file=/etc/ssl/private/vsftpd.pem # SSL ssl_enable=YES allow_anon_ssl=NO force_local_data_ssl=YES force_local_logins_ssl=YES ssl_tlsv1=YES ssl_sslv2=YES ssl_sslv3=YES Thanks!

  Read the article

• Can't Get Virtual Users Setup in VSFTPD -Tried Everything

  - by N.T.

  Have Ubuntu 11.10 with vsftpd installed and working. Can not get virtual users setup at all? Vsftpd will allow main Ubuntu owner account to login, but nothing else? I've followed several tutorials on adding virtual users, but nothing works? I just need to add 2 virtual users and have them be able to upload files to vsftpd Ubuntu computer from other computers on my Lan network. Everywhere I've looked, people just point toward tutorials on adding virtual users, but that just is NOT working. I've been struggling with this for over a week now! PLEASE Help. Thanks. I'll even give a donation if someone can figure this out. here is the vsftpd.conf file I am using. I copied the original, and make a new one, every time I try a tutorial. So far, none have worked. Here is the vsftpd.conf file I'm using. (I hope this helps?) # Example config file /etc/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # # Run standalone? vsftpd can run either from an inetd or as a standalone # daemon started from an initscript. listen=YES # # Run standalone with IPv6? # Like the listen parameter, except vsftpd will listen on an IPv6 socket # instead of an IPv4 one. This parameter and the listen parameter are mutually # exclusive. #listen_ipv6=YES # # Allow anonymous FTP? (Disabled by default) anonymous_enable=YES # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # If enabled, vsftpd will display directory listings with the time # in your local time zone. The default is to display GMT. The # times returned by the MDTM FTP command are also affected by this # option. use_localtime=YES # # Activate logging of uploads/downloads. xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # You may override where the log file goes if you like. The default is shown # below. #xferlog_file=/var/log/vsftpd.log # # If you want, you can have your log file in standard ftpd xferlog format. # Note that the default log file location is /var/log/xferlog in this case. xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: ftpd_banner=Welcome to Sage FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd.banned_emails # # You may restrict local users to their home directories. See the FAQ for # the possible risks in this before using chroot_local_user or # chroot_list_enable below. chroot_local_user=YES # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_local_user=YES #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd.chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # Debian customization # # Some of vsftpd's settings don't fit the Debian filesystem layout by # default. These settings are more Debian-friendly. # # This option should be the name of a directory which is empty. Also, the # directory should not be writable by the ftp user. This directory is used # as a secure chroot() jail at times vsftpd does not require filesystem # access. secure_chroot_dir=/var/run/vsftpd/empty # # This string is the name of the PAM service vsftpd will use. pam_service_name=vsftpd local_root=/media/FilesDrive # # This option specifies the location of the RSA certificate to use for SSL # encrypted connections. rsa_cert_file=/etc/ssl/private/vsftpd.pem

  Read the article

< Previous Page | 486 487 488 489 490 491 492 493 494 495 496 497  | Next Page >