Search Results

Search found 12705 results on 509 pages for 'ip routing'.

Page 492/509 | < Previous Page | 488 489 490 491 492 493 494 495 496 497 498 499  | Next Page >

  • grdb not working variables

    - by stupid_idiot
    hi, i know this is kinda retarded but I just can't figure it out. I'm debugging this: xor eax,eax mov ah,[var1] mov al,[var2] call addition stop: jmp stop var1: db 5 var2: db 6 addition: add ah,al ret the numbers that I find on addresses var1 and var2 are 0x0E and 0x07. I know it's not segmented, but that ain't reason for it to do such escapades, because the addition call works just fine. Could you please explain to me where is my mistake? I see the problem, dunno how to fix it yet though. The thing is, for some reason the instruction pointer starts at 0x100 and all the segment registers at 0x1628. To address the instruction the used combination is i guess [cs:ip] (one of the segment registers and the instruction pointer for sure). The offset to var1 is 0x10 (probably because from the begining of the code it's the 0x10th byte in order), i tried to examine the memory and what i got was: 1628:100 8 bytes 1628:108 8 bytes 1628:110 <- wtf? (assume another 8 bytes) 1628:118 ... whatever tricks are there in the memory [cs:var1] points somewhere else than in my code, which is probably where the label .data would usually address ds.... probably.. i don't know what is supposed to be at 1628:10 ok, i found out what caused the assness and wasted me whole fuckin day. the behaviour described above is just correct, the code is fully functional. what i didn't know is that grdb debugger for some reason sets the begining address to 0x100... the sollution is to insert the directive ORG 0x100 on the first line and that's the whole thing. the code was working because instruction pointer has the right address to first instruction and goes one by one, but your assembler doesn't know what effective address will be your program stored at so it pretty much remains relative to first line of the code which means all the variables (if not using label for data section) will remain pointing as if it started at 0x0. which of course wouldn't work with DOS. and grdb apparently emulates some DOS features... sry for the language, thx everyone for effort, hope this will spare someone's time if having the same problem... heheh.. at least now i know the reason why to use .data section :))))

    Read the article

  • How to interpret kernel panics?

    - by Owen
    Hi all, I'm new to linux kernel and could barely understand how to debug kernel panics. I have this error below and I don't know where in the C code should I start checking. I was thinking maybe I could echo what functions are being called so I could check where in the code is this null pointer dereferenced. What print function should I use ? How do you interpret the error message below? Unable to handle kernel NULL pointer dereference at virtual address 0000000d pgd = c7bdc000 [0000000d] *pgd=4785f031, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT Modules linked in: bcm5892_secdom_fw(P) bcm5892_lcd snd_bcm5892 msr bcm5892_sci bcm589x_ohci_p12 bcm5892_skeypad hx_decoder(P) pinnacle hx_memalloc(P) bcm_udc_dwc scsi_mod g_serial sd_mod usb_storage CPU: 0 Tainted: P (2.6.27.39-WR3.0.2ax_standard #1) PC is at __kmalloc+0x70/0xdc LR is at __kmalloc+0x48/0xdc pc : [c0098cc8] lr : [c0098ca0] psr: 20000093 sp : c7a9fd50 ip : c03a4378 fp : c7a9fd7c r10: bf0708b4 r9 : c7a9e000 r8 : 00000040 r7 : bf06d03c r6 : 00000020 r5 : a0000093 r4 : 0000000d r3 : 00000000 r2 : 00000094 r1 : 00000020 r0 : c03a4378 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 00c5387d Table: 47bdc008 DAC: 00000015 Process sh (pid: 1088, stack limit = 0xc7a9e260) Stack: (0xc7a9fd50 to 0xc7aa0000) fd40: c7a6a1d0 00000020 c7a9fd7c c7ba8fc0 fd60: 00000040 c7a6a1d0 00000020 c71598c0 c7a9fd9c c7a9fd80 bf06d03c c0098c64 fd80: c71598c0 00000003 c7a6a1d0 bf06c83c c7a9fdbc c7a9fda0 bf06d098 bf06d008 fda0: c7159880 00000000 c7a6a2d8 c7159898 c7a9fde4 c7a9fdc0 bf06d130 bf06d078 fdc0: c79ca000 c7159880 00000000 00000000 c7afbc00 c7a9e000 c7a9fe0c c7a9fde8 fde0: bf06d4b4 bf06d0f0 00000000 c79fd280 00000000 0f700000 c7a9e000 00000241 fe00: c7a9fe3c c7a9fe10 c01c37b4 bf06d300 00000000 c7afbc00 00000000 00000000 fe20: c79cba84 c7463c78 c79fd280 c7473b00 c7a9fe6c c7a9fe40 c00a184c c01c35e4 fe40: 00000000 c7bb0005 c7a9fe64 c79fd280 c7463c78 00000000 c00a1640 c785e380 fe60: c7a9fe94 c7a9fe70 c009c438 c00a164c c79fd280 c7a9fed8 c7a9fed8 00000003 fe80: 00000242 00000000 c7a9feb4 c7a9fe98 c009c614 c009c2a4 00000000 c7a9fed8 fea0: c7a9fed8 00000000 c7a9ff64 c7a9feb8 c00aa6bc c009c5e8 00000242 000001b6 fec0: 000001b6 00000241 00000022 00000000 00000000 c7a9fee0 c785e380 c7473b00 fee0: d8666b0d 00000006 c7bb0005 00000300 00000000 00000000 00000001 40002000 ff00: c7a9ff70 c79b10a0 c79b10a0 00005402 00000003 c78d69c0 ffffff9c 00000242 ff20: 000001b6 c79fd280 c7a9ff64 c7a9ff38 c785e380 c7473b00 00000000 00000241 ff40: 000001b6 ffffff9c 00000003 c7bb0000 c7a9e000 00000000 c7a9ff94 c7a9ff68 ff60: c009c128 c00aa380 4d18b5f0 08000000 00000000 00071214 0007128c 00071214 ff80: 00000005 c0027ee4 c7a9ffa4 c7a9ff98 c009c274 c009c0d8 00000000 c7a9ffa8 ffa0: c0027d40 c009c25c 00071214 0007128c 0007128c 00000241 000001b6 00000000 ffc0: 00071214 0007128c 00071214 00000005 00073580 00000003 000713e0 400010d0 ffe0: 00000001 bef0c7b8 000269cc 4d214fec 60000010 0007128c 00000000 00000000 Backtrace: [] (__kmalloc+0x0/0xdc) from [] (gs_alloc_req+0x40/0x70 [g_serial]) r8:c71598c0 r7:00000020 r6:c7a6a1d0 r5:00000040 r4:c7ba8fc0 [] (gs_alloc_req+0x0/0x70 [g_serial]) from [] (gs_alloc_requests+0x2c/0x78 [g_serial]) r7:bf06c83c r6:c7a6a1d0 r5:00000003 r4:c71598c0 [] (gs_alloc_requests+0x0/0x78 [g_serial]) from [] (gs_start_io+0x4c/0xac [g_serial]) r7:c7159898 r6:c7a6a2d8 r5:00000000 r4:c7159880 [] (gs_start_io+0x0/0xac [g_serial]) from [] (gs_open+0x1c0/0x224 [g_serial]) r9:c7a9e000 r8:c7afbc00 r7:00000000 r6:00000000 r5:c7159880 r4:c79ca000 [] (gs_open+0x0/0x224 [g_serial]) from [] (tty_open+0x1dc/0x314) [] (tty_open+0x0/0x314) from [] (chrdev_open+0x20c/0x22c) [] (chrdev_open+0x0/0x22c) from [] (__dentry_open+0x1a0/0x2b8) r8:c785e380 r7:c00a1640 r6:00000000 r5:c7463c78 r4:c79fd280 [] (__dentry_open+0x0/0x2b8) from [] (nameidata_to_filp+0x38/0x50) [] (nameidata_to_filp+0x0/0x50) from [] (do_filp_open+0x348/0x6f4) r4:00000000 [] (do_filp_open+0x0/0x6f4) from [] (do_sys_open+0x5c/0x170) [] (do_sys_open+0x0/0x170) from [] (sys_open+0x24/0x28) r8:c0027ee4 r7:00000005 r6:00071214 r5:0007128c r4:00071214 [] (sys_open+0x0/0x28) from [] (ret_fast_syscall+0x0/0x2c) Code: e59c4080 e59c8090 e3540000 159c308c (17943103) ---[ end trace be196e7cee3cb1c9 ]--- note: sh[1088] exited with preempt_count 2 process '-/bin/sh' (pid 1088) exited. Scheduling for restart. Welcome to Wind River Linux

    Read the article

  • Why sockets does not die when server dies? Why socket dies when server is alive?

    - by Roman
    I try to play with sockets a bit. For that I wrote very simple "client" and "server" applications. Client: import java.net.*; public class client { public static void main(String[] args) throws Exception { InetAddress localhost = InetAddress.getLocalHost(); System.out.println("before"); Socket clientSideSocket = null; try { clientSideSocket = new Socket(localhost,12345,localhost,54321); } catch (ConnectException e) { System.out.println("Connection Refused"); } System.out.println("after"); if (clientSideSocket != null) { clientSideSocket.close(); } } } Server: import java.net.*; public class server { public static void main(String[] args) throws Exception { ServerSocket listener = new ServerSocket(12345); while (true) { Socket serverSideSocket = listener.accept(); System.out.println("A client-request is accepted."); } } } And I found a behavior that I cannot explain: I start a server, than I start a client. Connection is successfully established (client stops running and server is running). Then I close the server and start it again in a second. After that I start a client and it writes "Connection Refused". It seems to me that the server "remember" the old connection and does not want to open the second connection twice. But I do not understand how it is possible. Because I killed the previous server and started a new one! I do not start the server immediately after the previous one was killed (I wait like 20 seconds). In this case the server "forget" the socket from the previous server and accepts the request from the client. I start the server and then I start the client. Connection is established (server writes: "A client-request is accepted"). Then I wait a minute and start the client again. And server (which was running the whole time) accept the request again! Why? The server should not accept the request from the same client-IP and client-port but it does!

    Read the article

  • Windows 7 laptop with two active network connections will not perform DNS AAAA lookup under certain conditions

    - by Jeff Loughridge
    My laptop has two network interfaces. The Ethernet interface connects directly to my provider's edge router. It obtains an IPv6 address via SLAAC. I manually set an IPv6 DNS server. The wireless interface connects to a CPE router that doesn't understand IPv6. If the wireless interface is disabled, I can reach the IPv6 Internet with no problems using the Ethernet interface. I run into problems when both interfaces are enabled and the wireless interface get its IPv4 DNS server via DHCP. Let's look at two scenarios. Wireless interface obtains IPv4 DNS server via DHCP - The CPE router (192.168.0.1) sends its address as the DNS server. In this scenario, Windows 7 will not perform AAAA lookups. The browser uses IPv4 transit to reach dual stack web sites. I can't reach IPv6-only web sites using domain names. I can reach IPv6-enabled web sites using IPv6 literals instead of the domain name. Wireless interface is manually configured with OpenDNS DNS server - Windows 7 performs AAAA lookups using IPv6 transit (via the Ethernet). Everything works fine. My dual homed set-up is definitely not standard. Still, the behavior is very strange to me. A valid IPv6 interface exists in my Ethernet interface. Why won't Windows attempt AAAA lookups in scenario #1? I've included the output of ipconfig /all and netstat -rn. C:\Program Files\Console>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : jake Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : res.openband.net Wireless LAN adapter Wireless Network Connection 2: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter Physical Address. . . . . . . . . : C0-CB-38-06-54-F9 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : res.openband.net Description . . . . . . . . . . . : DW1520 Wireless-N WLAN Half-Mini Card Physical Address. . . . . . . . . : C0-CB-38-06-54-F9 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::fc39:9293:7d01:4a75%13(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.105(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Wednesday, July 11, 2012 7:35:21 AM Lease Expires . . . . . . . . . . : Thursday, July 12, 2012 9:49:46 AM Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DHCPv6 IAID . . . . . . . . . . . : 364956472 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-80-F8-14-5C-26-0A-03-23-5C DNS Servers . . . . . . . . . . . : 208.67.222.222 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : res.openband.net Description . . . . . . . . . . . : Intel(R) 82577LM Gigabit Network Connection Physical Address. . . . . . . . . : 5C-26-0A-03-23-5C DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2607:2600:1:850:c0e9:211a:fd05:4e0b(Preferred) Temporary IPv6 Address. . . . . . : 2607:2600:1:850:3d29:1839:62db:c4c1(Preferred) Link-local IPv6 Address . . . . . : fe80::c0e9:211a:fd05:4e0b%12(Preferred) IPv4 Address. . . . . . . . . . . : 10.52.2.51(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.254.0 Lease Obtained. . . . . . . . . . : Monday, July 09, 2012 8:55:07 AM Lease Expires . . . . . . . . . . : Thursday, July 12, 2012 7:30:05 AM Default Gateway . . . . . . . . . : fe80::214:6aff:fe51:7f3f%12 10.52.2.1 DHCP Server . . . . . . . . . . . : 216.40.77.244 DNS Servers . . . . . . . . . . . : 2620:0:ccc::2 2620:0:ccd::2 216.40.77.126 216.40.77.244 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet1 Physical Address. . . . . . . . . : 00-50-56-C0-00-01 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::4c61:495b:229e:281e%14(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.40.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 469782614 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-80-F8-14-5C-26-0A-03-23-5C DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet8 Physical Address. . . . . . . . . : 00-50-56-C0-00-08 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::f996:61eb:8c00:45e6%15(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.17.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 486559830 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-80-F8-14-5C-26-0A-03-23-5C DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled C:\Program Files\Console>netstat -rn =========================================================================== Interface List 17...c0 cb 38 06 54 f9 ......Microsoft Virtual WiFi Miniport Adapter 13...c0 cb 38 06 54 f9 ......DW1520 Wireless-N WLAN Half-Mini Card 12...5c 26 0a 03 23 5c ......Intel(R) 82577LM Gigabit Network Connection 11...5c ac 4c f8 b8 55 ......Bluetooth Device (Personal Area Network) 14...00 50 56 c0 00 01 ......VMware Virtual Ethernet Adapter for VMnet1 15...00 50 56 c0 00 08 ......VMware Virtual Ethernet Adapter for VMnet8 1...........................Software Loopback Interface 1 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.52.2.1 10.52.2.51 10 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.105 100 10.52.2.0 255.255.254.0 On-link 10.52.2.51 261 10.52.2.51 255.255.255.255 On-link 10.52.2.51 261 10.52.3.255 255.255.255.255 On-link 10.52.2.51 261 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.0 On-link 192.168.0.105 306 192.168.0.105 255.255.255.255 On-link 192.168.0.105 306 192.168.0.255 255.255.255.255 On-link 192.168.0.105 306 192.168.17.0 255.255.255.0 On-link 192.168.17.1 276 192.168.17.1 255.255.255.255 On-link 192.168.17.1 276 192.168.17.255 255.255.255.255 On-link 192.168.17.1 276 192.168.40.0 255.255.255.0 On-link 192.168.40.1 276 192.168.40.1 255.255.255.255 On-link 192.168.40.1 276 192.168.40.255 255.255.255.255 On-link 192.168.40.1 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.52.2.51 261 224.0.0.0 240.0.0.0 On-link 192.168.0.105 306 224.0.0.0 240.0.0.0 On-link 192.168.40.1 276 224.0.0.0 240.0.0.0 On-link 192.168.17.1 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.52.2.51 261 255.255.255.255 255.255.255.255 On-link 192.168.0.105 306 255.255.255.255 255.255.255.255 On-link 192.168.40.1 276 255.255.255.255 255.255.255.255 On-link 192.168.17.1 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 12 261 ::/0 fe80::214:6aff:fe51:7f3f 1 306 ::1/128 On-link 12 13 2607:2600:1:850::/64 On-link 12 261 2607:2600:1:850:3d29:1839:62db:c4c1/128 On-link 12 261 2607:2600:1:850:c0e9:211a:fd05:4e0b/128 On-link 12 261 fe80::/64 On-link 13 281 fe80::/64 On-link 14 276 fe80::/64 On-link 15 276 fe80::/64 On-link 14 276 fe80::4c61:495b:229e:281e/128 On-link 12 261 fe80::c0e9:211a:fd05:4e0b/128 On-link 15 276 fe80::f996:61eb:8c00:45e6/128 On-link 13 281 fe80::fc39:9293:7d01:4a75/128 On-link 1 306 ff00::/8 On-link 12 261 ff00::/8 On-link 13 281 ff00::/8 On-link 14 276 ff00::/8 On-link 15 276 ff00::/8 On-link =========================================================================== Persistent Routes: None

    Read the article

  • What do I need to change to get this 'acts_as_rateable' Rails plugin working with this code from the

    - by tepidsam
    Hello! I'm working my way through the 'Foundation Rails 2' book. In Chapter 9, we are building a little "plugins" app. In the book, he installs the acts_as_rateable plugin found at http://juixe.com/svn/acts_as_rateable. This plugin doesn't appear to exist in 2010 (the page for this "old" plugin seems to be working again...it was down when I tried it earlier), so I found another acts_as_rateable plugin at http://github.com/azabaj/acts_as_rateable. These plugins are different and I'm trying to get the "new" plugin working with the code/project/app from the Foudations 2 book. I was able to use the migration generator included with the "new" plugin and it worked. Now,though, I'm a bit confused. In the book, he has us create a new controller to work with the plugin (the old plugin). Here's the code for that: class RatingsController < ApplicationController def create @plugin = Plugin.find(params[:plugin_id]) rating = Rating.new(:rating => params[:rating]) @plugin.ratings << average_rating redirect_to @plugin end end Then he had us change the routing: map.resources :plugins, :has_many => :ratings map.resources :categories map.root :controller => 'plugins' Next, we modified the following to the 'show' template so that it looks like this: <div id="rate_plugin"> <h2>Rate this plugin</h2> <ul class="star-rating"> <li> <%= link_to "1", @plugin.rate_it(1), :method => :post, :title => "1 star out of 5", :class => "one-star" %> </li> <li> <%= link_to "2", plugin_ratings_path(@plugin, :rating => 2), :method => :post, :title => "2 stars out of 5", :class => "two-stars" %> </li> <li> <%= link_to "3", plugin_ratings_path(@plugin, :rating => 3), :method => :post, :title => "3 stars out of 5", :class => "three-stars" %> </li> <li> <%= link_to "4", plugin_ratings_path(@plugin, :rating => 4), :method => :post, :title => "4 stars out of 5", :class => "four-stars" %> </li> <li> <%= link_to "5", plugin_ratings_path(@plugin, :rating => 5), :method => :post, :title => "5 stars out of 5", :class => "five-stars" %> </li> </ul> </div> The problem is that we're using code for a different plugin. When I try to actually "rate" one of the plugins, I get an "unknown attribute" error. That makes sense. I'm using attribute names for the "old" plugin, but I should be using attributes names for the "new" plugin. The problem is...I've tried using a variety of different attribute names and I keep getting the same error. From the README for the "new" plugin, I think I should be using some of these but I haven't been able to get them working: Install the plugin into your vendor/plugins directory, insert 'acts_as_rateable' into your model, then restart your application. class Post < ActiveRecord::Base acts_as_rateable end Now your model is extended by the plugin, you can rate it ( 1-# )or calculate the average rating. @plugin.rate_it( 4, current_user.id ) @plugin.average_rating #=> 4.0 @plugin.average_rating_round #=> 4 @plugin.average_rating_percent #=> 80 @plugin.rated_by?( current_user ) #=> rating || false Plugin.find_average_of( 4 ) #=> array of posts See acts_as_rateable.rb for further details! I'm guessing that I might have to make some "bigger" changes to get this plugin working. I'm asking this question to learn and only learn. The book gives code to get things working with the old plugin, but if one were actually building this app today it would be necessary to use this "new" plugin, so I would like to see how it could be used. Cheers! Any ideas on what I could change to get the "new" plugin working?

    Read the article

  • Weird Datagrid / paint behaviour

    - by Shane.C
    The scenario: A method sends out a broadcast packet, and returned packets that are validated are deemed okay to be added as a row in my datagrid (The returned packets are from devices i want to add into my program). So for each packet returned, containing information about a device, i create a new row. This is done by first sending packets out, creating rows and adding them to a list of rows that are to be added, and then after 5 seconds (In which case all packets would have returned by then) i add the rows. Here's a few snippets of code. Here for each returned packet, i create a row and add it to a list; DataRow row = DGSource.NewRow(); row["Name"] = deviceName; row["Model"] = deviceModel; row["Location"] = deviceLocation; row["IP"] = finishedIP; row["MAC"] = finishedMac; row["Subnet"] = finishedSubnet; row["Gateway"] = finishedGateway; rowsToAdd.Add(row); Then when the timer elapses; void timerToAddRows_Elapsed(object sender, System.Timers.ElapsedEventArgs e) { timerToAddRows.Enabled = false; try { int count = 0; foreach (DataRow rowToAdd in rowsToAdd) { DGSource.Rows.Add(rowToAdd); count++; } rowsToAdd.Clear(); DGAutoDevices.InvokeEx(f => DGAutoDevices.Refresh()); lblNumberFound.InvokeEx(f => lblNumberFound.Text = count + " new devices found."); } catch { } } So at this point, each row has been added, and i call the re paint, by doing refresh. (Note: i've also tried refreshing the form itself, no avail). However, when the datagrid shows the rows, the scroll bar / datagrid seems to have weird behavour..for example i can't highlight anything with clicks (It's set to full row selection), and the scroll bar looks like so; Calling refresh doesn't work, although if i resize the window even 1 pixel, or minimize and maximise, the problem is solved. Other things to note : The method that get's the packets and adds the rows to the list, and then from the list to the datagrid runs in it's own thread. Any ideas as to something i might be missing here?

    Read the article

  • An error occurred creating the form. See Exception.InnerException for details. The error is: Object

    - by Ben
    I get this error when attempting to debug my form, I cannot see where at all the error could be (also does not highlight where), anyone have any suggestions? An error occurred creating the form. See Exception.InnerException for details. The error is: Object reference not set to an instance of an object. Public Class Form1 Dim dateCrap As String = "Date:" Dim IPcrap As String = "Ip:" Dim pcCrap As String = "Computer:" Dim programCrap As String = "Program:" Dim textz As String = TextBox1.Text Dim sep() As String = {vbNewLine & vbNewLine} Dim sections() As String = Text.Split(sep, StringSplitOptions.None) Dim NewArray() As String = TextBox1.Text.Split(vbNewLine) Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click For i = 0 To sections.Count - 1 TextBox2.Text = sections(i) Dim text2 As String = TextBox2.Text Dim sep2() As String = {vbNewLine & vbNewLine} Dim sections2() As String = Text.Split(sep, StringSplitOptions.None) Dim FTPinfo() As String = TextBox2.Text.Split(vbNewLine) Dim clsRequest As System.Net.FtpWebRequest = _ DirectCast(System.Net.WebRequest.Create(sections2(0).Replace("Url/Host:", "")), System.Net.FtpWebRequest) clsRequest.Credentials = New System.Net.NetworkCredential(sections2(1).Replace("Login:", ""), (sections2(2).Replace("Password:", ""))) clsRequest.Method = System.Net.WebRequestMethods.Ftp.UploadFile ' read in file... Dim bFile() As Byte = System.IO.File.ReadAllBytes(txtShellDir.Text) ' upload file... Dim clsStream As System.IO.Stream = clsRequest.GetRequestStream() clsStream.Write(bFile, 0, bFile.Length) clsStream.Close() clsStream.Dispose() Next End Sub Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click ListBox1.Items.Clear() Dim fdlg As OpenFileDialog = New OpenFileDialog() fdlg.Title = "Browse for the FTP List you wish to use." fdlg.InitialDirectory = Application.ExecutablePath fdlg.Filter = "All files (*.txt)|*.txt|txt files (*.txt)|*.txt" fdlg.FilterIndex = 2 fdlg.RestoreDirectory = True If fdlg.ShowDialog() = DialogResult.OK Then 'ListBox1.Items.AddRange(Split(My.Computer.FileSystem.ReadAllText(fdlg.FileName), vbNewLine)) TextBox1.Text = My.Computer.FileSystem.ReadAllText(fdlg.FileName) End If Dim tmp() As String = TextBox1.Text.Split(CChar(vbNewLine)) For Each line As String In tmp If line.Length > 1 Then TextBox1.AppendText(line & vbNewLine) End If Next TextBox1.Text = TextBox1.Text.Replace(" ", "") TextBox1.Text = TextBox1.Text.Replace("----------------------------------------------------------", vbNewLine) For Each item As String In NewArray ListBox1.Items.Add(item) Next Try For i = 0 To ListBox1.Items.Count - 1 If ListBox1.Items(i).Contains(dateCrap) Then ListBox1.Items.RemoveAt(i) End If Next Catch ex As Exception End Try Try For i = 0 To ListBox1.Items.Count - 1 If ListBox1.Items(i).Contains(IPcrap) Then ListBox1.Items.RemoveAt(i) End If Next Catch ex As Exception End Try Try For i = 0 To ListBox1.Items.Count - 1 If ListBox1.Items(i).Contains(pcCrap) Then ListBox1.Items.RemoveAt(i) End If Next Catch ex As Exception End Try Try For i = 0 To ListBox1.Items.Count - 1 If ListBox1.Items(i).Contains(programCrap) Then ListBox1.Items.RemoveAt(i) End If Next Catch ex As Exception End Try TextBox1.Text = "" For Each thing As Object In ListBox1.Items TextBox1.AppendText(thing.ToString & vbNewLine) Next End Sub Private Sub Button4_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) For i = 0 To ListBox1.SelectedItems.Count - 1 TextBox1.Text = TextBox1.Text & ListBox1.Items.Item(i).ToString() & vbNewLine Next End Sub End Class

    Read the article

  • I am having trouble using jquery to submit a form. It was working before

    - by noah
    When a user clicks a link it uses jquery ajax to submit a form to go to paypal. Not working for some reason. Really appreciate any help... LINK TO CLICK I put this in an href for onClick: javascript:go_paypal(); CODE TO EXECUTE ON CLICK function go_paypal() { data = 'req_paypal=1'; $.blockUI({ message: '<h1> Going to Paypal...</h1>',css:{background:'#000'} }); $.ajax({ type: "POST", url: "index.php", data: data, success: function(data) { $("#paypal_form").html(data); $("#payPalForm").submit(); } , error: function() {$.unblockUI(); alert('Unable to communicate to server.'); } }); return false; } CODE TO GO ON SUBMIT if(isset($_POST['req_paypal']) && $_POST['req_paypal'] == 1 ) { $sql = 'INSERT INTO `transactions` (id,type,ip,time,ammount,status) VALUES (NULL,1,\''.$_SERVER['REMOTE_ADDR'].'\',\''.time().'\',\''.$global['paypal_prod_amount'].'\',0) '; echo $sql; mysql_query($sql); $id = mysql_insert_id(); $html = ' <form action="https://www.sandbox.paypal.com/cgi-bin/webscr" method="post" id="payPalForm"> <input type="hidden" name="item_number" value="One Year of Imgur Pro"> <input type="hidden" name="cmd" value="_xclick"> <input type="hidden" name="no_note" value="1"> <input type="hidden" name="business" value="'.$global['paypal_email'].'"> <input type="hidden" name="custom" value="'.base64_encode($id).'"> <input type="hidden" name="currency_code" value="USD"> <input type="hidden" name="return" value="'.$global['paypal_return'].'"> <input name="item_name" type="hidden" id="item_name" value="One Year of Imgur Pro" > <input name="amount" type="hidden" id="amount" value="'.$global['paypal_prod_amount'].'" > </form> '; echo $html;exit; }

    Read the article

  • Request URL in Javascript, Fetch URL Content using Java Applet, return to Javascript?

    - by Sam G
    I'm in the process of making a little experiment, it grabs a YouTube page, and returns the highest quality MP4 link, then plays this in a HTML 5 Video element. Now I was using PHP with cURL to get the URL content (YouTube), but that only works on my local server (MP4 link is locked to IP address). I can't think of any other way to get the page content due to cross domain rules except a Java applet. So I've built a Java applet that should return the content of a URL. Java import java.applet.Applet; import java.awt.*; import java.io.ByteArrayOutputStream; import java.io.InputStream; import java.net.HttpURLConnection; import java.net.URL; public class URLFetcherabc extends Applet { public void init() { } public void paint(Graphics g) { g.drawString("Java loaded. Waiting for URL", 0, 10); } public String getURL(String url, String httpMethod) { try { URL u = new URL(url); HttpURLConnection conn = (HttpURLConnection)u.openConnection(); conn.setRequestMethod(httpMethod); InputStream is = conn.getInputStream(); ByteArrayOutputStream output = new ByteArrayOutputStream(); byte[] buffer = new byte[1024]; for (int bytesRead = 0; (bytesRead = is.read(buffer)) != -1; ) { output.write(buffer, 0, bytesRead); } return output.toString(); } catch (Exception e) { }return null; } } Now I've got the applet on the page, but every-time I call the function it returns nothing. Heres my HTML for including the applet. HTML <applet id="URLFetcher" name="URLFetcher" code="URLFetcherabc.class" archive="URLFetcher.jar" height="200" width="200" mayscript=""></applet> Java-Script function fetchurl(urltofetch) { var URLFetcher = document.getElementById("URLFetcher"); var result = URLFetcher.getURL(urltofetch); //Result = URL Content return result; } The function always returns null, in Java the function does work when passed a variable via other means (parameter etc). I've tried running other functions through Javascript and the Java applet does respond. I'm new to Java applets and communicating with them via Javascript, so I'm probably making either a small mistake somewhere or its completely wrong. Any ideas? Thanks

    Read the article

  • Android: Unable to access a local website over HTTPS

    - by user1253789
    I am trying to access a locally hosted website and get its HTML source to parse. I have few questions: 1) Can I use "https://An IP ADDRESS HERE" as a valid URL to try and access. I do not want to make changes in the /etc/hosts file so I want to do it this way. 2) I cannot get the html, since it is giving me Handshake exceptions and Certificate issues. I have tried a lot of help available over the web , but am not successful. Here is the code I am using: public class MainActivity extends Activity { private TextView textView; String response = ""; String finalresponse=""; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_main); textView = (TextView) findViewById(R.id.TextView01); System.setProperty("javax.net.ssl.trustStore","C:\\User\\*" ); System.setProperty("javax.net.ssl.trustStorePassword", "" ); } private class DownloadWebPageTask extends AsyncTask<String, Void, String> { @Override protected String doInBackground(String... urls) { TrustManager[] trustAllCerts = new TrustManager[] { new X509TrustManager() { public java.security.cert.X509Certificate[] getAcceptedIssuers() { return null; } public void checkClientTrusted(java.security.cert.X509Certificate[] certs, String authType) { } public void checkServerTrusted(java.security.cert.X509Certificate[] certs, String authType) { } } }; try { SSLContext sc = SSLContext.getInstance("SSL"); sc.init(null, trustAllCerts, new java.security.SecureRandom()); HttpsURLConnection.setDefaultSSLSocketFactory(sc.getSocketFactory()); } catch (Exception e) { } try { URL url = new URL("https://172.27.224.133"); HttpsURLConnection con =(HttpsURLConnection)url.openConnection(); con.setHostnameVerifier(new AllowAllHostnameVerifier()); finalresponse=readStream(con.getInputStream()); } catch (Exception e) { e.printStackTrace(); } return finalresponse; } private String readStream(InputStream in) { BufferedReader reader = null; try { reader = new BufferedReader(new InputStreamReader(in)); String line = ""; while ((line = reader.readLine()) != null) { response+=line; } } catch (IOException e) { e.printStackTrace(); } finally { if (reader != null) { try { reader.close(); } catch (IOException e) { e.printStackTrace(); } } } return response; } @Override protected void onPostExecute(String result) { textView.setText(finalresponse); } } public void readWebpage(View view) { DownloadWebPageTask task = new DownloadWebPageTask(); task.execute(new String[] { "https://172.27.224.133" }); } }

    Read the article

  • how to create multiple tcp connections between server and client

    - by lowcosthighperformance
    I am new in Unix/Linux networking programming, so I have written server-client program in below.In this code there is one socket between client and server, client requests to server, then server responses from 1 to 100 numbers to client. So my question is how can we do this process with 3 socket( tcp connection) without using thread? ( e.g. First socket runs then second runs then third runs then first again .. ) Do you have any suggestion? Thank you client.c int main() { int sock; struct sockaddr_in sa; int ret; char buf[1024]; int x; sock = socket (AF_INET, SOCK_STREAM, 0); bzero (&sa, sizeof(sa)); sa.sin_family = AF_INET; sa.sin_port = htons(SERVER_PORT); inet_pton (AF_INET, SERVER_IP, &sa.sin_addr); ret = connect (sock, (const struct sockaddr *) &sa,sizeof (sa)); if (ret != 0) { printf ("connect failed\n"); exit (0); } x = 0; while (x != -1) { read (sock, buf , sizeof(int)); x = ntohl(*((int *)buf)); if (x != -1) printf ("int rcvd = %d\n", x); } close (sock); exit (0); } server.c int main() { int list_sock; int conn_sock; struct sockaddr_in sa, ca; socklen_t ca_len; char buf[1024]; int i; char ipaddrstr[IPSTRLEN]; list_sock = socket (AF_INET, SOCK_STREAM, 0); bzero (&sa, sizeof(sa)); sa.sin_family = AF_INET; sa.sin_addr.s_addr = htonl(INADDR_ANY); sa.sin_port = htons(SERVER_PORT); bind (list_sock,(struct sockaddr *) &sa,sizeof(sa)); listen (list_sock, 5); while (1){ bzero (&ca, sizeof(ca)); ca_len = sizeof(ca); // important to initialize conn_sock = accept (list_sock,(struct sockaddr *) &ca,&ca_len); printf ("connection from: ip=%s port=%d \n",inet_ntop(AF_INET, &(ca.sin_addr), ipaddrstr, IPSTRLEN),ntohs(ca.sin_port)); for (i=0; i<100; ++i){ *((int *)buf) = htonl(i+20); // we using converting to network byte order write (conn_sock, buf, sizeof(int)); } * ((int *)buf) = htonl(-1); write (conn_sock, buf, sizeof(int)); close (conn_sock); printf ("server closed connection to client\n"); } }

    Read the article

  • Query string problem if we use header

    - by avani-nature
    Hai frnds i am new to php actually i am facing following problems in coding please can anyone give the solution? Actually i am having one audio player and i am displaying some word dcoument if i click word document corresponding audio file should play actually when i click doc file it should pop ip with save as and open with for that i am using some header code also i am passing query string in the browser query string is not working if i use header can anyone give me a solution for it below is my code i am attaching <?php $f_name = $_POST["fn"]; $id = $_POST["id1"]; echo $id; //echo "../public_html/sites/default/files/ourfiles/$f_name"; $res2=db_query("select * from mt_files where id='".$id."' "); $row2=db_fetch_array($res2); $job_audio=$row2["audio_name"]; //echo $job_audio; //$job_audi=explode("/",$job_audio); //$job_audio=$job_audi[8]; $job_audio= "C:/xampp/htdocs/med/sites/default/files/audio/$job_audio"; //$job_audio= "C:/Documents and Settings/swuser/My Documents/$job_audio"; //echo $job_audio; echo "<object data='$job_audio' type='application/x-mplayer2' width='150' height='45'> <param name='src' value='$job_audio'> <param name='autoplay' value='true'> <param name='autoStart' value='1'> </object> "; $file = "../mts/sites/default/files/docs/$f_name"; if (file_exists($file)) { header('Content-Description: File Transfer'); header('Content-Type: application/octet-stream'); header('Content-Disposition: attachment; filename='.basename($file)); header('Content-Transfer-Encoding: binary'); header('Expires: 0'); header('Cache-Control: must-revalidate, post-check=0, pre-check=0'); header('Pragma: public'); header('Content-Length: ' . filesize($file)); ob_clean(); flush(); readfile($file); exit; } //The download table query goes here put the $f_name in insert into with the //time varible ?>

    Read the article

  • PHP_AUTH_USER only known in certain frames

    - by Rob
    Getting very confused by PHP_AUTH_USER. Within my web pages I have .htaccess files in every directory, controlling who can (and cant) see certain folders. In order to further customise the pages I was hoping to use PHP_AUTH_USER within the PHP code, i.e. tailor page contents based on the user. This only seems to work partially. The code snippets below hopefully demonstrate my problems. The main index.php creates a framed page with a menu structure in the top left hand corners, some irrelvant stuff in top right and then the tailor made contents in bottom frame. In top left the user is correctly shown, but in the bottom frame PHP_AUTH_USER doesnt seem to be set anymore (it returns empty and when printing all $HTTP_SERVER_VARS its not listed). Script.php is in a different path, but they all have .htaccess files in them and all other contents is displayed correctly. Why does it not know about PHP_AUTH_USER there? Running version php version 5.2.12 on chrome. index.php <FRAMESET ROWS="35%, *"> <FRAMESET COLS="25%, *"> <FRAME SRC="Menu.php"> <FRAME SRC="Something.php"> </FRAMESET> <FRAME SRC="../OtherPath/Script.php?large=1" name="outputlisting"> </FRAMESET> </FRAMESET> Menu.php <ul> <li>Reporting <ul> <li>Link1 <a href="../OtherPath/Script.php" target="outputlisting">All</a>, <a href="../OtherPath/Script.php?large=1" target="outputlisting">Big</a> </ul> <?php echo 'IP Address: ' . $_SERVER['REMOTE_ADDR'] . '<br />'; echo 'User: ' . $_SERVER['PHP_AUTH_USER']; ?> Script.php <?php echo 'User: ' . $_SERVER['PHP_AUTH_USER']; ?>

    Read the article

  • Using an alternate JSON Serializer in ASP.NET Web API

    - by Rick Strahl
    The new ASP.NET Web API that Microsoft released alongside MVC 4.0 Beta last week is a great framework for building REST and AJAX APIs. I've been working with it for quite a while now and I really like the way it works and the complete set of features it provides 'in the box'. It's about time that Microsoft gets a decent API for building generic HTTP endpoints into the framework. DataContractJsonSerializer sucks As nice as Web API's overall design is one thing still sucks: The built-in JSON Serialization uses the DataContractJsonSerializer which is just too limiting for many scenarios. The biggest issues I have with it are: No support for untyped values (object, dynamic, Anonymous Types) MS AJAX style Date Formatting Ugly serialization formats for types like Dictionaries To me the most serious issue is dealing with serialization of untyped objects. I have number of applications with AJAX front ends that dynamically reformat data from business objects to fit a specific message format that certain UI components require. The most common scenario I have there are IEnumerable query results from a database with fields from the result set rearranged to fit the sometimes unconventional formats required for the UI components (like jqGrid for example). Creating custom types to fit these messages seems like overkill and projections using Linq makes this much easier to code up. Alas DataContractJsonSerializer doesn't support it. Neither does DataContractSerializer for XML output for that matter. What this means is that you can't do stuff like this in Web API out of the box:public object GetAnonymousType() { return new { name = "Rick", company = "West Wind", entered= DateTime.Now }; } Basically anything that doesn't have an explicit type DataContractJsonSerializer will not let you return. FWIW, the same is true for XmlSerializer which also doesn't work with non-typed values for serialization. The example above is obviously contrived with a hardcoded object graph, but it's not uncommon to get dynamic values returned from queries that have anonymous types for their result projections. Apparently there's a good possibility that Microsoft will ship Json.NET as part of Web API RTM release.  Scott Hanselman confirmed this as a footnote in his JSON Dates post a few days ago. I've heard several other people from Microsoft confirm that Json.NET will be included and be the default JSON serializer, but no details yet in what capacity it will show up. Let's hope it ends up as the default in the box. Meanwhile this post will show you how you can use it today with the beta and get JSON that matches what you should see in the RTM version. What about JsonValue? To be fair Web API DOES include a new JsonValue/JsonObject/JsonArray type that allow you to address some of these scenarios. JsonValue is a new type in the System.Json assembly that can be used to build up an object graph based on a dictionary. It's actually a really cool implementation of a dynamic type that allows you to create an object graph and spit it out to JSON without having to create .NET type first. JsonValue can also receive a JSON string and parse it without having to actually load it into a .NET type (which is something that's been missing in the core framework). This is really useful if you get a JSON result from an arbitrary service and you don't want to explicitly create a mapping type for the data returned. For serialization you can create an object structure on the fly and pass it back as part of an Web API action method like this:public JsonValue GetJsonValue() { dynamic json = new JsonObject(); json.name = "Rick"; json.company = "West Wind"; json.entered = DateTime.Now; dynamic address = new JsonObject(); address.street = "32 Kaiea"; address.zip = "96779"; json.address = address; dynamic phones = new JsonArray(); json.phoneNumbers = phones; dynamic phone = new JsonObject(); phone.type = "Home"; phone.number = "808 123-1233"; phones.Add(phone); phone = new JsonObject(); phone.type = "Home"; phone.number = "808 123-1233"; phones.Add(phone); //var jsonString = json.ToString(); return json; } which produces the following output (formatted here for easier reading):{ name: "rick", company: "West Wind", entered: "2012-03-08T15:33:19.673-10:00", address: { street: "32 Kaiea", zip: "96779" }, phoneNumbers: [ { type: "Home", number: "808 123-1233" }, { type: "Mobile", number: "808 123-1234" }] } If you need to build a simple JSON type on the fly these types work great. But if you have an existing type - or worse a query result/list that's already formatted JsonValue et al. become a pain to work with. As far as I can see there's no way to just throw an object instance at JsonValue and have it convert into JsonValue dictionary. It's a manual process. Using alternate Serializers in Web API So, currently the default serializer in WebAPI is DataContractJsonSeriaizer and I don't like it. You may not either, but luckily you can swap the serializer fairly easily. If you'd rather use the JavaScriptSerializer built into System.Web.Extensions or Json.NET today, it's not too difficult to create a custom MediaTypeFormatter that uses these serializers and can replace or partially replace the native serializer. Here's a MediaTypeFormatter implementation using the ASP.NET JavaScriptSerializer:using System; using System.Net.Http.Formatting; using System.Threading.Tasks; using System.Web.Script.Serialization; using System.Json; using System.IO; namespace Westwind.Web.WebApi { public class JavaScriptSerializerFormatter : MediaTypeFormatter { public JavaScriptSerializerFormatter() { SupportedMediaTypes.Add(new System.Net.Http.Headers.MediaTypeHeaderValue("application/json")); } protected override bool CanWriteType(Type type) { // don't serialize JsonValue structure use default for that if (type == typeof(JsonValue) || type == typeof(JsonObject) || type== typeof(JsonArray) ) return false; return true; } protected override bool CanReadType(Type type) { if (type == typeof(IKeyValueModel)) return false; return true; } protected override System.Threading.Tasks.Taskobject OnReadFromStreamAsync(Type type, System.IO.Stream stream, System.Net.Http.Headers.HttpContentHeaders contentHeaders, FormatterContext formatterContext) { var task = Taskobject.Factory.StartNew(() = { var ser = new JavaScriptSerializer(); string json; using (var sr = new StreamReader(stream)) { json = sr.ReadToEnd(); sr.Close(); } object val = ser.Deserialize(json,type); return val; }); return task; } protected override System.Threading.Tasks.Task OnWriteToStreamAsync(Type type, object value, System.IO.Stream stream, System.Net.Http.Headers.HttpContentHeaders contentHeaders, FormatterContext formatterContext, System.Net.TransportContext transportContext) { var task = Task.Factory.StartNew( () = { var ser = new JavaScriptSerializer(); var json = ser.Serialize(value); byte[] buf = System.Text.Encoding.Default.GetBytes(json); stream.Write(buf,0,buf.Length); stream.Flush(); }); return task; } } } Formatter implementation is pretty simple: You override 4 methods to tell which types you can handle and then handle the input or output streams to create/parse the JSON data. Note that when creating output you want to take care to still allow JsonValue/JsonObject/JsonArray types to be handled by the default serializer so those objects serialize properly - if you let either JavaScriptSerializer or JSON.NET handle them they'd try to render the dictionaries which is very undesirable. If you'd rather use Json.NET here's the JSON.NET version of the formatter:// this code requires a reference to JSON.NET in your project #if true using System; using System.Net.Http.Formatting; using System.Threading.Tasks; using System.Web.Script.Serialization; using System.Json; using Newtonsoft.Json; using System.IO; using Newtonsoft.Json.Converters; namespace Westwind.Web.WebApi { public class JsonNetFormatter : MediaTypeFormatter { public JsonNetFormatter() { SupportedMediaTypes.Add(new System.Net.Http.Headers.MediaTypeHeaderValue("application/json")); } protected override bool CanWriteType(Type type) { // don't serialize JsonValue structure use default for that if (type == typeof(JsonValue) || type == typeof(JsonObject) || type == typeof(JsonArray)) return false; return true; } protected override bool CanReadType(Type type) { if (type == typeof(IKeyValueModel)) return false; return true; } protected override System.Threading.Tasks.Taskobject OnReadFromStreamAsync(Type type, System.IO.Stream stream, System.Net.Http.Headers.HttpContentHeaders contentHeaders, FormatterContext formatterContext) { var task = Taskobject.Factory.StartNew(() = { var settings = new JsonSerializerSettings() { NullValueHandling = NullValueHandling.Ignore, }; var sr = new StreamReader(stream); var jreader = new JsonTextReader(sr); var ser = new JsonSerializer(); ser.Converters.Add(new IsoDateTimeConverter()); object val = ser.Deserialize(jreader, type); return val; }); return task; } protected override System.Threading.Tasks.Task OnWriteToStreamAsync(Type type, object value, System.IO.Stream stream, System.Net.Http.Headers.HttpContentHeaders contentHeaders, FormatterContext formatterContext, System.Net.TransportContext transportContext) { var task = Task.Factory.StartNew( () = { var settings = new JsonSerializerSettings() { NullValueHandling = NullValueHandling.Ignore, }; string json = JsonConvert.SerializeObject(value, Formatting.Indented, new JsonConverter[1] { new IsoDateTimeConverter() } ); byte[] buf = System.Text.Encoding.Default.GetBytes(json); stream.Write(buf,0,buf.Length); stream.Flush(); }); return task; } } } #endif   One advantage of the Json.NET serializer is that you can specify a few options on how things are formatted and handled. You get null value handling and you can plug in the IsoDateTimeConverter which is nice to product proper ISO dates that I would expect any Json serializer to output these days. Hooking up the Formatters Once you've created the custom formatters you need to enable them for your Web API application. To do this use the GlobalConfiguration.Configuration object and add the formatter to the Formatters collection. Here's what this looks like hooked up from Application_Start in a Web project:protected void Application_Start(object sender, EventArgs e) { // Action based routing (used for RPC calls) RouteTable.Routes.MapHttpRoute( name: "StockApi", routeTemplate: "stocks/{action}/{symbol}", defaults: new { symbol = RouteParameter.Optional, controller = "StockApi" } ); // WebApi Configuration to hook up formatters and message handlers // optional RegisterApis(GlobalConfiguration.Configuration); } public static void RegisterApis(HttpConfiguration config) { // Add JavaScriptSerializer formatter instead - add at top to make default //config.Formatters.Insert(0, new JavaScriptSerializerFormatter()); // Add Json.net formatter - add at the top so it fires first! // This leaves the old one in place so JsonValue/JsonObject/JsonArray still are handled config.Formatters.Insert(0, new JsonNetFormatter()); } One thing to remember here is the GlobalConfiguration object which is Web API's static configuration instance. I think this thing is seriously misnamed given that GlobalConfiguration could stand for anything and so is hard to discover if you don't know what you're looking for. How about WebApiConfiguration or something more descriptive? Anyway, once you know what it is you can use the Formatters collection to insert your custom formatter. Note that I insert my formatter at the top of the list so it takes precedence over the default formatter. I also am not removing the old formatter because I still want JsonValue/JsonObject/JsonArray to be handled by the default serialization mechanism. Since they process in sequence and I exclude processing for these types JsonValue et al. still get properly serialized/deserialized. Summary Currently DataContractJsonSerializer in Web API is a pain, but at least we have the ability with relatively limited effort to replace the MediaTypeFormatter and plug in our own JSON serializer. This is useful for many scenarios - if you have existing client applications that used MVC JsonResult or ASP.NET AJAX results from ASMX AJAX services you can plug in the JavaScript serializer and get exactly the same serializer you used in the past so your results will be the same and don't potentially break clients. JSON serializers do vary a bit in how they serialize some of the more complex types (like Dictionaries and dates for example) and so if you're migrating it might be helpful to ensure your client code doesn't break when you switch to ASP.NET Web API. Going forward it looks like Microsoft is planning on plugging in Json.Net into Web API and make that the default. I think that's an awesome choice since Json.net has been around forever, is fast and easy to use and provides a ton of functionality as part of this great library. I just wish Microsoft would have figured this out sooner instead of now at the last minute integrating with it especially given that Json.Net has a similar set of lower level JSON objects JsonValue/JsonObject etc. which now will end up being duplicated by the native System.Json stuff. It's not like we don't already have enough confusion regarding which JSON serializer to use (JavaScriptSerializer, DataContractJsonSerializer, JsonValue/JsonObject/JsonArray and now Json.net). For years I've been using my own JSON serializer because the built in choices are both limited. However, with an official encorsement of Json.Net I'm happily moving on to use that in my applications. Let's see and hope Microsoft gets this right before ASP.NET Web API goes gold.© Rick Strahl, West Wind Technologies, 2005-2012Posted in Web Api  AJAX  ASP.NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • HTG Reviews the CODE Keyboard: Old School Construction Meets Modern Amenities

    - by Jason Fitzpatrick
    There’s nothing quite as satisfying as the smooth and crisp action of a well built keyboard. If you’re tired of  mushy keys and cheap feeling keyboards, a well-constructed mechanical keyboard is a welcome respite from the $10 keyboard that came with your computer. Read on as we put the CODE mechanical keyboard through the paces. What is the CODE Keyboard? The CODE keyboard is a collaboration between manufacturer WASD Keyboards and Jeff Atwood of Coding Horror (the guy behind the Stack Exchange network and Discourse forum software). Atwood’s focus was incorporating the best of traditional mechanical keyboards and the best of modern keyboard usability improvements. In his own words: The world is awash in terrible, crappy, no name how-cheap-can-we-make-it keyboards. There are a few dozen better mechanical keyboard options out there. I’ve owned and used at least six different expensive mechanical keyboards, but I wasn’t satisfied with any of them, either: they didn’t have backlighting, were ugly, had terrible design, or were missing basic functions like media keys. That’s why I originally contacted Weyman Kwong of WASD Keyboards way back in early 2012. I told him that the state of keyboards was unacceptable to me as a geek, and I proposed a partnership wherein I was willing to work with him to do whatever it takes to produce a truly great mechanical keyboard. Even the ardent skeptic who questions whether Atwood has indeed created a truly great mechanical keyboard certainly can’t argue with the position he starts from: there are so many agonizingly crappy keyboards out there. Even worse, in our opinion, is that unless you’re a typist of a certain vintage there’s a good chance you’ve never actually typed on a really nice keyboard. Those that didn’t start using computers until the mid-to-late 1990s most likely have always typed on modern mushy-key keyboards and never known the joy of typing on a really responsive and crisp mechanical keyboard. Is our preference for and love of mechanical keyboards shining through here? Good. We’re not even going to try and hide it. So where does the CODE keyboard stack up in pantheon of keyboards? Read on as we walk you through the simple setup and our experience using the CODE. Setting Up the CODE Keyboard Although the setup of the CODE keyboard is essentially plug and play, there are two distinct setup steps that you likely haven’t had to perform on a previous keyboard. Both highlight the degree of care put into the keyboard and the amount of customization available. Inside the box you’ll find the keyboard, a micro USB cable, a USB-to-PS2 adapter, and a tool which you may be unfamiliar with: a key puller. We’ll return to the key puller in a moment. Unlike the majority of keyboards on the market, the cord isn’t permanently affixed to the keyboard. What does this mean for you? Aside from the obvious need to plug it in yourself, it makes it dead simple to repair your own keyboard cord if it gets attacked by a pet, mangled in a mechanism on your desk, or otherwise damaged. It also makes it easy to take advantage of the cable routing channels in on the underside of the keyboard to  route your cable exactly where you want it. While we’re staring at the underside of the keyboard, check out those beefy rubber feet. By peripherals standards they’re huge (and there is six instead of the usual four). Once you plunk the keyboard down where you want it, it might as well be glued down the rubber feet work so well. After you’ve secured the cable and adjusted it to your liking, there is one more task  before plug the keyboard into the computer. On the bottom left-hand side of the keyboard, you’ll find a small recess in the plastic with some dip switches inside: The dip switches are there to switch hardware functions for various operating systems, keyboard layouts, and to enable/disable function keys. By toggling the dip switches you can change the keyboard from QWERTY mode to Dvorak mode and Colemak mode, the two most popular alternative keyboard configurations. You can also use the switches to enable Mac-functionality (for Command/Option keys). One of our favorite little toggles is the SW3 dip switch: you can disable the Caps Lock key; goodbye accidentally pressing Caps when you mean to press Shift. You can review the entire dip switch configuration chart here. The quick-start for Windows users is simple: double check that all the switches are in the off position (as seen in the photo above) and then simply toggle SW6 on to enable the media and backlighting function keys (this turns the menu key on the keyboard into a function key as typically found on laptop keyboards). After adjusting the dip switches to your liking, plug the keyboard into an open USB port on your computer (or into your PS/2 port using the included adapter). Design, Layout, and Backlighting The CODE keyboard comes in two flavors, a traditional 87-key layout (no number pad) and a traditional 104-key layout (number pad on the right hand side). We identify the layout as traditional because, despite some modern trapping and sneaky shortcuts, the actual form factor of the keyboard from the shape of the keys to the spacing and position is as classic as it comes. You won’t have to learn a new keyboard layout and spend weeks conditioning yourself to a smaller than normal backspace key or a PgUp/PgDn pair in an unconventional location. Just because the keyboard is very conventional in layout, however, doesn’t mean you’ll be missing modern amenities like media-control keys. The following additional functions are hidden in the F11, F12, Pause button, and the 2×6 grid formed by the Insert and Delete rows: keyboard illumination brightness, keyboard illumination on/off, mute, and then the typical play/pause, forward/backward, stop, and volume +/- in Insert and Delete rows, respectively. While we weren’t sure what we’d think of the function-key system at first (especially after retiring a Microsoft Sidewinder keyboard with a huge and easily accessible volume knob on it), it took less than a day for us to adapt to using the Fn key, located next to the right Ctrl key, to adjust our media playback on the fly. Keyboard backlighting is a largely hit-or-miss undertaking but the CODE keyboard nails it. Not only does it have pleasant and easily adjustable through-the-keys lighting but the key switches the keys themselves are attached to are mounted to a steel plate with white paint. Enough of the light reflects off the interior cavity of the keys and then diffuses across the white plate to provide nice even illumination in between the keys. Highlighting the steel plate beneath the keys brings us to the actual construction of the keyboard. It’s rock solid. The 87-key model, the one we tested, is 2.0 pounds. The 104-key is nearly a half pound heavier at 2.42 pounds. Between the steel plate, the extra-thick PCB board beneath the steel plate, and the thick ABS plastic housing, the keyboard has very solid feel to it. Combine that heft with the previously mentioned thick rubber feet and you have a tank-like keyboard that won’t budge a millimeter during normal use. Examining The Keys This is the section of the review the hardcore typists and keyboard ninjas have been waiting for. We’ve looked at the layout of the keyboard, we’ve looked at the general construction of it, but what about the actual keys? There are a wide variety of keyboard construction techniques but the vast majority of modern keyboards use a rubber-dome construction. The key is floated in a plastic frame over a rubber membrane that has a little rubber dome for each key. The press of the physical key compresses the rubber dome downwards and a little bit of conductive material on the inside of the dome’s apex connects with the circuit board. Despite the near ubiquity of the design, many people dislike it. The principal complaint is that dome keyboards require a complete compression to register a keystroke; keyboard designers and enthusiasts refer to this as “bottoming out”. In other words, the register the “b” key, you need to completely press that key down. As such it slows you down and requires additional pressure and movement that, over the course of tens of thousands of keystrokes, adds up to a whole lot of wasted time and fatigue. The CODE keyboard features key switches manufactured by Cherry, a company that has manufactured key switches since the 1960s. Specifically the CODE features Cherry MX Clear switches. These switches feature the same classic design of the other Cherry switches (such as the MX Blue and Brown switch lineups) but they are significantly quieter (yes this is a mechanical keyboard, but no, your neighbors won’t think you’re firing off a machine gun) as they lack the audible click found in most Cherry switches. This isn’t to say that they keyboard doesn’t have a nice audible key press sound when the key is fully depressed, but that the key mechanism isn’t doesn’t create a loud click sound when triggered. One of the great features of the Cherry MX clear is a tactile “bump” that indicates the key has been compressed enough to register the stroke. For touch typists the very subtle tactile feedback is a great indicator that you can move on to the next stroke and provides a welcome speed boost. Even if you’re not trying to break any word-per-minute records, that little bump when pressing the key is satisfying. The Cherry key switches, in addition to providing a much more pleasant typing experience, are also significantly more durable than dome-style key switch. Rubber dome switch membrane keyboards are typically rated for 5-10 million contacts whereas the Cherry mechanical switches are rated for 50 million contacts. You’d have to write the next War and Peace  and follow that up with A Tale of Two Cities: Zombie Edition, and then turn around and transcribe them both into a dozen different languages to even begin putting a tiny dent in the lifecycle of this keyboard. So what do the switches look like under the classicly styled keys? You can take a look yourself with the included key puller. Slide the loop between the keys and then gently beneath the key you wish to remove: Wiggle the key puller gently back and forth while exerting a gentle upward pressure to pop the key off; You can repeat the process for every key, if you ever find yourself needing to extract piles of cat hair, Cheeto dust, or other foreign objects from your keyboard. There it is, the naked switch, the source of that wonderful crisp action with the tactile bump on each keystroke. The last feature worthy of a mention is the N-key rollover functionality of the keyboard. This is a feature you simply won’t find on non-mechanical keyboards and even gaming keyboards typically only have any sort of key roller on the high-frequency keys like WASD. So what is N-key rollover and why do you care? On a typical mass-produced rubber-dome keyboard you cannot simultaneously press more than two keys as the third one doesn’t register. PS/2 keyboards allow for unlimited rollover (in other words you can’t out type the keyboard as all of your keystrokes, no matter how fast, will register); if you use the CODE keyboard with the PS/2 adapter you gain this ability. If you don’t use the PS/2 adapter and use the native USB, you still get 6-key rollover (and the CTRL, ALT, and SHIFT don’t count towards the 6) so realistically you still won’t be able to out type the computer as even the more finger twisting keyboard combos and high speed typing will still fall well within the 6-key rollover. The rollover absolutely doesn’t matter if you’re a slow hunt-and-peck typist, but if you’ve read this far into a keyboard review there’s a good chance that you’re a serious typist and that kind of quality construction and high-number key rollover is a fantastic feature.  The Good, The Bad, and the Verdict We’ve put the CODE keyboard through the paces, we’ve played games with it, typed articles with it, left lengthy comments on Reddit, and otherwise used and abused it like we would any other keyboard. The Good: The construction is rock solid. In an emergency, we’re confident we could use the keyboard as a blunt weapon (and then resume using it later in the day with no ill effect on the keyboard). The Cherry switches are an absolute pleasure to type on; the Clear variety found in the CODE keyboard offer a really nice middle-ground between the gun-shot clack of a louder mechanical switch and the quietness of a lesser-quality dome keyboard without sacrificing quality. Touch typists will love the subtle tactile bump feedback. Dip switch system makes it very easy for users on different systems and with different keyboard layout needs to switch between operating system and keyboard layouts. If you’re investing a chunk of change in a keyboard it’s nice to know you can take it with you to a different operating system or “upgrade” it to a new layout if you decide to take up Dvorak-style typing. The backlighting is perfect. You can adjust it from a barely-visible glow to a blazing light-up-the-room brightness. Whatever your intesity preference, the white-coated steel backplate does a great job diffusing the light between the keys. You can easily remove the keys for cleaning (or to rearrange the letters to support a new keyboard layout). The weight of the unit combined with the extra thick rubber feet keep it planted exactly where you place it on the desk. The Bad: While you’re getting your money’s worth, the $150 price tag is a shock when compared to the $20-60 price tags you find on lower-end keyboards. People used to large dedicated media keys independent of the traditional key layout (such as the large buttons and volume controls found on many modern keyboards) might be off put by the Fn-key style media controls on the CODE. The Verdict: The keyboard is clearly and heavily influenced by the needs of serious typists. Whether you’re a programmer, transcriptionist, or just somebody that wants to leave the lengthiest article comments the Internet has ever seen, the CODE keyboard offers a rock solid typing experience. Yes, $150 isn’t pocket change, but the quality of the CODE keyboard is so high and the typing experience is so enjoyable, you’re easily getting ten times the value you’d get out of purchasing a lesser keyboard. Even compared to other mechanical keyboards on the market, like the Das Keyboard, you’re still getting more for your money as other mechanical keyboards don’t come with the lovely-to-type-on Cherry MX Clear switches, back lighting, and hardware-based operating system keyboard layout switching. If it’s in your budget to upgrade your keyboard (especially if you’ve been slogging along with a low-end rubber-dome keyboard) there’s no good reason to not pickup a CODE keyboard. Key animation courtesy of Geekhack.org user Lethal Squirrel.       

    Read the article

  • CodePlex Daily Summary for Thursday, March 01, 2012

    CodePlex Daily Summary for Thursday, March 01, 2012Popular ReleasesMetodología General Ajustada - MGA: 01.09.08: Cambios John: Cambios en el MDI: Habilitación del menú e ícono de Imprimir. Deshabilitación de menú Ayuda y opciones de Importar y Exportar del menú Proyectos temporalmente. Integración con código de Crystal Report. Validaciones con Try-Catch al generar los reportes, personalización de los formularios en estilos y botones y validación de selección de tipo de reporte. Creación de instalador con TODOS los cambios y la creación de las carpetas asociadas a los RPT.WatchersNET CKEditor™ Provider for DotNetNuke®: CKEditor Provider 1.14.01: Whats NewAdded New Plugin "Ventrian News Articles Link Selector" to select an Article Link from the News Article Module (This Plugin is not visible by default in your Toolbar, you need to manually add the 'newsarticleslinks' to your toolbarset) http://www.watchersnet.de/Portals/0/screenshots/dnn/CKEditorNewsArticlesLinks.png File-Browser: Added Paging to the Files List. You can define the Page Size in the Options (Default Value: 20) http://www.watchersnet.de/Portals/0/screenshots/dnn/CKEdito...MyRouter (Virtual WiFi Router): MyRouter 1.0 (Beta): A friendlier User Interface. A logger file to catch exceptions so you may send it to use to improve and fix any bugs that may occur. A feedback form because we always love hearing what you guy's think of MyRouter. Check for update menu item for you to stay up to date will the latest changes. Facebook fan page so you may spread the word and share MyRouter with friends and family And Many other exciting features were sure your going to love!WPF Sound Visualization Library: WPF SVL 0.3 (Source, Binaries, Examples, Help): Version 0.3 of WPFSVL. This includes three new controls: an equalizer, a digital clock, and a time editor.Thai Flood Watch: Thai Flood Watch - Source: non commercial use only ** This project supported by Department of Computer Science KhonKaen University Thailand.ZXing.Net: ZXing.Net 0.4.0.0: sync with rev. 2196 of the java version important fix for RGBLuminanceSource generating barcode bitmaps Windows Phone demo client (only tested with emulator, because I don't have a Windows Phone) Barcode generation support for Windows Forms demo client Webcam support for Windows Forms demo clientOrchard Project: Orchard 1.4: Please read our release notes for Orchard 1.4: http://docs.orchardproject.net/Documentation/Orchard-1-4-Release-Notes.NET Assembly Information: Assembly Information 2.1.0.1: - Fixed the issue in which AnyCPU binaries were shown as 32bit - Added support to show the errors in-case if some dlls failed to load.FluentData -Micro ORM with a fluent API that makes it simple to query a database: FluentData version 1.2: New features: - QueryValues method - Added support for automapping to enumerations (both int and string are supported). Fixed 2 reported issues.NetSqlAzMan - .NET SQL Authorization Manager: 3.6.0.15: 3.6.0.15 28-Feb-2012 • Fix: The communication object, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state. Work Item 10435: http://netsqlazman.codeplex.com/workitem/10435 • Fix: Made StorageCache thread safe. Thanks to tangrl. • Fix: Members property of SqlAzManApplicationGroup is not functioning. Thanks to tangrl. Work Item 10267: http://netsqlazman.codeplex.com/workitem/10267 • Fix: Indexer are making database calls. Thanks to t...SCCM Client Actions Tool: Client Actions Tool v1.1: SCCM Client Actions Tool v1.1 is the latest version. It comes with following changes since last version: Added stop button to stop the ongoing process. Added action "Query update status". Added option "saveOnlineComputers" in config.ini to enable saving list of online computers from last session. Default value for "LatestClientVersion" set to SP2 R3 (4.00.6487.2157). Wuauserv service manual startup mode is considered healthy on Windows 7. Errors are now suppressed in checkReleases...Kinect PowerPoint Control: Kinect PowerPoint Control v1.1: Updated for Kinect SDK 1.0.SharpCompress - a fully native C# library for RAR, 7Zip, Zip, Tar, GZip, BZip2: SharpCompress 0.8: API Updates: SOLID Extract Method for Archives (7Zip and RAR). ExtractAllEntries method on Archive classes will extract archives as a streaming file. This can offer better 7Zip extraction performance if any of the entries are solid. The IsSolid method on 7Zip archives will return true if any are solid. Removed IExtractionListener was removed in favor of events. Unit tests show example. Bug fixes: PPMd passes tests plus other fixes (Thanks Pavel) Zip used to always write a Post Descri...Social Network Importer for NodeXL: SocialNetImporter(v.1.3): This new version includes: - Download new networks for Facebook fan pages. - New options for downloading more posts - Bug fixes To use the new graph data provider, do the following: Unzip the Zip file into the "PlugIns" folder that can be found in the NodeXL installation folder (i.e "C:\Program Files\Social Media Research Foundation\NodeXL Excel Template\PlugIns") Open NodeXL template and you can access the new importer from the "Import" menuASP.NET REST Services Framework: Release 1.1 - Standard version: Beginning from v1.1 the REST-services Framework is compatible with ASP.NET Routing model as well with CRUD (Create, Read, Update, and Delete) principle. These two are often important when building REST API functionality within your application. It also includes ability to apply Filters to a class to target all WebRest methods, as well as some performance enhancements. New version includes Metadata Explorer providing ability exploring the existing services that becomes essential as the number ...SQL Live Monitor: SQL Live Monitor 1.31: A quick fix to make it this version work with SQL 2012. Version 2 already has 2012 working, but am still developing the UI in version 2, so this is just an interim fix to allow user to monitor SQL 2012.Content Slider Module for DotNetNuke: 01.02.00: This release has the following updates and new features: Feature: One-Click Enabling of Pager Setting Feature: Cache Sliders for Performance Feature: Configurable Cache Setting Enhancement: Transitions can be Selected Bug: Secure Folder Images not Viewable Bug: Sliders Disappear on Postback Bug: Remote Images Cause Error Bug: Deleted Images Cause Error System Requirements DotNetNuke v06.00.00 or newer .Net Framework v3.5 SP1 or newer SQL Server 2005 or newerImage Resizer for Windows: Image Resizer 3 Preview 3: Here is yet another iteration toward what will eventually become Image Resizer 3. This release is stable. However, I'm calling it a preview since there are still many features I'd still like to add before calling it complete. Updated on February 28 to fix an issue with installing on multi-user machines. As usual, here is my progress report. Done Preview 3 Fix: 3206 3076 3077 5688 Fix: 7420 Fix: 7527 Fix: 7576 7612 Preview 2 6308 6309 Fix: 7339 Fix: 7357 Preview 1 UI...Finestra Virtual Desktops: 2.5.4500: This is a bug fix release for version 2.5. It fixes several things and adds a couple of minor features. See the 2.5 release notes for more information on the major new features in that version. Important - If Finestra crashes on startup for you, you must install the Visual C++ 2010 runtime from http://www.microsoft.com/download/en/details.aspx?id=5555. Fixes a bug with window animations not refreshing the screen on XP and with DWM off Fixes a bug with with crashing on XP due to a bug in t...Media Companion: MC 3.432b Release: General Now remembers window location. Catching a few more exceptions when an image is blank TV A couple of UI tweaks Movies Fixed the actor name displaying HTML Fixed crash when using Save files as "movie.nfo", "movie.tbn", & "fanart.jpg" New CSV template for HTML output function Added <createdate> tag for HTML output A couple of UI tweaks Known Issues Multiepisodes are not handled correctly in MC. The created nfo is valid, but they are not displayed in MC correctly & saving the...New Projectsabac: abac cn websiteAION Launcher: simple aion launcher...just edit the background image of your choosing inside the code and other things such as the links for the buttons and the ip adress and port of the serverAXTFSTool: Dynamics AX tool that connects to your project's TFS and lists the objects your colleagues have changed. Written in C#, still under development and improvements. Useful for team leaders, deployment managers, etc.cookieTopo: Topo map viewerCrmFetchKit.js: Simple Library at allows the execution of fetchxml queries via JavaScript for Dynamics CRM 2011 (using the new WCF endpoints). Like the CrmRestKit this framework uses the promise/A capacities of jQuery. The code and the idea for this framework bases on the CrmServiceToolkit (http://crmtoolkit.codeplex.com/) developed by Daniel Cai. cy univerX engine: ????????DNSAPI.NET: A common API for managing DNS servers on Windows. This project is based on the work I started back in 2002 when I needed to create a web front-end for Windows' DNS server using the .Net framework. The plan is to expand on the project and include support for the BIND server on Windows too. ego.net: ego.netfdTFS: Team Foundation Server Source Control Plugin for FlashDevelopGeoWPS: GeoWPS is an implementation of the OGC WPS. It will be developed in C#. IThink: A new project.King Garden: Boy King's .net practical projects.King Garret: Boy King's .net learning projects.LottoCheck: Follow LottoNot-Terraria: This is a like terraria game but NOT terrariaPassword Protector: Password Protector SharePoint 2010 BlobCache Manager: Manage your web application's blobcache settings directly in the central administration.SharePoint 2010 SilverLight Multiple File Uploader: SharePoint 2010 SilverLight Multiple File Uploader for Documents Libraries with MetaData.Sharepoint Tool Collection: I want to Integrate Various Utilities of Sharepoint at one place. It is for easy working of user or developer. Ex-1. A utility which takes some params & csv file and upload 100s of items on the sharepoint list easily. Ex-2 A utility to upload documents in a library. etc.SQLCLR Cmd Exec Framework Example: For users of MS SQL Server, xp_cmdshell is a utility that we usually want to have disabled. However there are still cases where calling a command line is needed. This project provides an framework/example to make command line calls. It is not meant as an xp_cmdshell replacement but as a workaround.Symmetric Designs Python 3.2: Symmetric Designs for Python 3.2 helps graphical artists to design and develop their own designs freestyle. It uses the pygame module for Python 3.2. It can also be analysed in order to get a grasp of graphics programming in Python.Terminsoft open CLR libraries: Terminsoft open CLR libraries. The first is Terminsoft.Intervals, intended for modeling the sets of intervals with elements, the comparison operation is defined for. The second is Terminsoft.Syntax, intended for text parsing and transformation and built upon regular expressions.Thai Flood Watch: Thai Flood Watch provides useful information, up-to-date and visual access to the major canal in Bangkok, Thailand using data from department of drainage and sewerage. Easily monitor river and canal flow information in Bangkok area, right from your hand.TheNerd: Sample video game source code. Using Sunburn.Unity.WebAPI: A library that allows simple Integration of Microsoft's Unity IoC container with ASP.NET's WebAPI. This project includes a bespoke DependencyResolver that creates a child container per HTTP request and disposes of all registered IDisposable instances at the end of the request.Wholemy.RemoteTouch: The project is a remote touch-sensitive keyboard with a customizable interface which allows to supplement control of another computer, regardless of the wires. For example, if you have not so fast Tablet PC - a client and a fast desktop computer - the server using the network.WindowPlace: WindowPlace makes it possible to save Window positions and sizes to a profile. Switching between profiles will effortlessly move and resize your windows. Help improve productivity - especially for multi-monitor systems. Developed in C# using WPF and a few Windows API calls in the background. WP Error Manager (Devv.Core.WPErrorManager): Library to log, handle and report errors on Windows Phone 7 apps. Fully customizable and extremely easy to implement. Works with any WP7 app. Tested with the emulator, Nokia Lumia 800 and Samsung Focus Flash.WPMatic: Windows Phone7 App to manage Homematic (eQ-3) Devices. The App is like the Homematic Central Configuration Unit (CCU) in German.www.Nabaza.com Freeware and Ebooks: www.Nabaza.com Freeware and Ebooks by William R. NabazaZap: Zap is a light weight .NET communication framework. It is designed for programs running in local area network. Zap provides code generation tool that enables user to call remote methods, add/remote event listener to remote objects, while hides the lower details.

    Read the article

  • Solaris 11.1: Changes to included FOSS packages

    - by alanc
    Besides the documentation changes I mentioned last time, another place you can see Solaris 11.1 changes before upgrading is in the online package repository, now that the 11.1 packages have been published to http://pkg.oracle.com/solaris/release/, as the “0.175.1.0.0.24.2” branch. (Oracle Solaris Package Versioning explains what each field in that version string means.) When you’re ready to upgrade to the packages from either this repo, or the support repository, you’ll want to first read How to Update to Oracle Solaris 11.1 Using the Image Packaging System by Pete Dennis, as there are a couple issues you will need to be aware of to do that upgrade, several of which are due to changes in the Free and Open Source Software (FOSS) packages included with Solaris, as I’ll explain in a bit. Solaris 11 can update more readily than Solaris 10 In the Solaris 10 and older update models, the way the updates were built constrained what changes we could make in those releases. To change an existing SVR4 package in those releases, we created a Solaris Patch, which applied to a given version of the SVR4 package and replaced, added or deleted files in it. These patches were released via the support websites (originally SunSolve, now My Oracle Support) for applying to existing Solaris 10 installations, and were also merged into the install images for the next Solaris 10 update release. (This Solaris Patches blog post from Gerry Haskins dives deeper into that subject.) Some of the restrictions of this model were that package refactoring, changes to package dependencies, and even just changing the package version number, were difficult to do in this hybrid patch/OS update model. For instance, when Solaris 10 first shipped, it had the Xorg server from X11R6.8. Over the first couple years of update releases we were able to keep it up to date by replacing, adding, & removing files as necessary, taking it all the way up to Xorg server release 1.3 (new version numbering begun after the X11R7 split of the X11 tree into separate modules gave each module its own version). But if you run pkginfo on the SUNWxorg-server package, you’ll see it still displayed a version number of 6.8, confusing users as to which version was actually included. We stopped upgrading the Xorg server releases in Solaris 10 after 1.3, as later versions added new dependencies, such as HAL, D-Bus, and libpciaccess, which were very difficult to manage in this patching model. (We later got libpciaccess to work, but HAL & D-Bus would have been much harder due to the greater dependency tree underneath those.) Similarly, every time the GNOME team looked into upgrading Solaris 10 past GNOME 2.6, they found these constraints made it so difficult it wasn’t worthwhile, and eventually GNOME’s dependencies had changed enough it was completely infeasible. Fortunately, this worked out for both the X11 & GNOME teams, with our management making the business decision to concentrate on the “Nevada” branch for desktop users - first as Solaris Express Desktop Edition, and later as OpenSolaris, so we didn’t have to fight to try to make the package updates fit into these tight constraints. Meanwhile, the team designing the new packaging system for Solaris 11 was seeing us struggle with these problems, and making this much easier to manage for both the development teams and our users was one of their big goals for the IPS design they were working on. Now that we’ve reached the first update release to Solaris 11, we can start to see the fruits of their labors, with more FOSS updates in 11.1 than we had in many Solaris 10 update releases, keeping software more up to date with the upstream communities. Of course, just because we can more easily update now, doesn’t always mean we should or will do so, it just removes the package system limitations from forcing the decision for us. So while we’ve upgraded the X Window System in the 11.1 release from X11R7.6 to 7.7, the Solaris GNOME team decided it was not the right time to try to make the jump from GNOME 2 to GNOME 3, though they did update some individual components of the desktop, especially those with security fixes like Firefox. In other parts of the system, decisions as to what to update were prioritized based on how they affected other projects, or what customer requests we’d gotten for them. So with all that background in place, what packages did we actually update or add between Solaris 11.0 and 11.1? Core OS Functionality One of the FOSS changes with the biggest impact in this release is the upgrade from Grub Legacy (0.97) to Grub 2 (1.99) for the x64 platform boot loader. This is the cause of one of the upgrade quirks, since to go from Solaris 11.0 to 11.1 on x64 systems, you first need to update the Boot Environment tools (such as beadm) to a new version that can handle boot environments that use the Grub2 boot loader. System administrators can find the details they need to know about the new Grub in the Administering the GRand Unified Bootloader chapter of the Booting and Shutting Down Oracle Solaris 11.1 Systems guide. This change was necessary to be able to support new hardware coming into the x64 marketplace, including systems using UEFI firmware or booting off disk drives larger than 2 terabytes. For both platforms, Solaris 11.1 adds rsyslog as an optional alternative to the traditional syslogd, and OpenSCAP for checking security configuration settings are compliant with site policies. Note that the support repo actually has newer versions of BIND & fetchmail than the 11.1 release, as some late breaking critical fixes came through from the community upstream releases after the Solaris 11.1 release was frozen, and made their way to the support repository. These are responsible for the other big upgrade quirk in this release, in which to upgrade a system which already installed those versions from the support repo, you need to either wait for those packages to make their way to the 11.1 branch of the support repo, or follow the steps in the aforementioned upgrade walkthrough to let the package system know it's okay to temporarily downgrade those. Developer Stack While Solaris 11.0 included Python 2.7, many of the bundled python modules weren’t packaged for it yet, limiting its usability. For 11.1, many more of the python modules include 2.7 versions (enough that I filtered them out of the below table, but you can always search on the package repository server for them. For other language runtimes and development tools, 11.1 expands the use of IPS mediated links to choose which version of a package is the default when the packages are designed to allow multiple versions to install side by side. For instance, in Solaris 11.0, GNU automake 1.9 and 1.10 were provided, and developers had to run them as either automake-1.9 or automake-1.10. In Solaris 11.1, when automake 1.11 was added, also added was a /usr/bin/automake mediated link, which points to the automake-1.11 program by default, but can be changed to another version by running the pkg set-mediator command. Mediated links were also used for the Java runtime & development kits in 11.1, changing the default versions to the Java 7 releases (the 1.7.0.x package versions), while allowing admins to switch links such as /usr/bin/javac back to Java 6 if they need to for their site, to deal with Java 7 compatibility or other issues, without having to update each usage to use the full versioned /usr/jdk/jdk1.6.0_35/bin/javac paths for every invocation. Desktop Stack As I mentioned before, we upgraded from X11R7.6 to X11R7.7, since a pleasant coincidence made the X.Org release dates line up nicely with our feature & code freeze dates for this release. (Or perhaps it wasn’t so coincidental, after all, one of the benefits of being the person making the release is being able to decide what schedule is most convenient for you, and this one worked well for me.) For the table below, I’ve skipped listing the packages in which we use the X11 “katamari” version for the Solaris package version (mainly packages combining elements of multiple upstream modules with independent version numbers), since they just all changed from 7.6 to 7.7. In the graphics drivers, we worked with Intel to update the Intel Integrated Graphics Processor support to support 3D graphics and kernel mode setting on the Ivy Bridge chipsets, and updated Nvidia’s non-FOSS graphics driver from 280.13 to 295.20. Higher up in the desktop stack, PulseAudio was added for audio support, and liblouis for Braille support, and the GNOME applications were built to use them. The Mozilla applications, Firefox & Thunderbird moved to the current Extended Support Release (ESR) versions, 10.x for each, to bring up-to-date security fixes without having to be on Mozilla’s agressive 6 week feature cycle release train. Detailed list of changes This table shows most of the changes to the FOSS packages between Solaris 11.0 and 11.1. As noted above, some were excluded for clarity, or to reduce noise and duplication. All the FOSS packages which didn't change the version number in their packaging info are not included, even if they had updates to fix bugs, security holes, or add support for new hardware or new features of Solaris. Package11.011.1 archiver/unrar 3.8.5 4.1.4 audio/sox 14.3.0 14.3.2 backup/rdiff-backup 1.2.1 1.3.3 communication/im/pidgin 2.10.0 2.10.5 compress/gzip 1.3.5 1.4 compress/xz not included 5.0.1 database/sqlite-3 3.7.6.3 3.7.11 desktop/remote-desktop/tigervnc 1.0.90 1.1.0 desktop/window-manager/xcompmgr 1.1.5 1.1.6 desktop/xscreensaver 5.12 5.15 developer/build/autoconf 2.63 2.68 developer/build/autoconf/xorg-macros 1.15.0 1.17 developer/build/automake-111 not included 1.11.2 developer/build/cmake 2.6.2 2.8.6 developer/build/gnu-make 3.81 3.82 developer/build/imake 1.0.4 1.0.5 developer/build/libtool 1.5.22 2.4.2 developer/build/makedepend 1.0.3 1.0.4 developer/documentation-tool/doxygen 1.5.7.1 1.7.6.1 developer/gnu-binutils 2.19 2.21.1 developer/java/jdepend not included 2.9 developer/java/jdk-6 1.6.0.26 1.6.0.35 developer/java/jdk-7 1.7.0.0 1.7.0.7 developer/java/jpackage-utils not included 1.7.5 developer/java/junit 4.5 4.10 developer/lexer/jflex not included 1.4.1 developer/parser/byaccj not included 1.14 developer/parser/java_cup not included 0.10 developer/quilt 0.47 0.60 developer/versioning/git 1.7.3.2 1.7.9.2 developer/versioning/mercurial 1.8.4 2.2.1 developer/versioning/subversion 1.6.16 1.7.5 diagnostic/constype 1.0.3 1.0.4 diagnostic/nmap 5.21 5.51 diagnostic/scanpci 0.12.1 0.13.1 diagnostic/wireshark 1.4.8 1.8.2 diagnostic/xload 1.1.0 1.1.1 editor/gnu-emacs 23.1 23.4 editor/vim 7.3.254 7.3.600 file/lndir 1.0.2 1.0.3 image/editor/bitmap 1.0.5 1.0.6 image/gnuplot 4.4.0 4.6.0 image/library/libexif 0.6.19 0.6.21 image/library/libpng 1.4.8 1.4.11 image/library/librsvg 2.26.3 2.34.1 image/xcursorgen 1.0.4 1.0.5 library/audio/pulseaudio not included 1.1 library/cacao 2.3.0.0 2.3.1.0 library/expat 2.0.1 2.1.0 library/gc 7.1 7.2 library/graphics/pixman 0.22.0 0.24.4 library/guile 1.8.4 1.8.6 library/java/javadb 10.5.3.0 10.6.2.1 library/java/subversion 1.6.16 1.7.5 library/json-c not included 0.9 library/libedit not included 3.0 library/libee not included 0.3.2 library/libestr not included 0.1.2 library/libevent 1.3.5 1.4.14.2 library/liblouis not included 2.1.1 library/liblouisxml not included 2.1.0 library/libtecla 1.6.0 1.6.1 library/libtool/libltdl 1.5.22 2.4.2 library/nspr 4.8.8 4.8.9 library/openldap 2.4.25 2.4.30 library/pcre 7.8 8.21 library/perl-5/subversion 1.6.16 1.7.5 library/python-2/jsonrpclib not included 0.1.3 library/python-2/lxml 2.1.2 2.3.3 library/python-2/nose not included 1.1.2 library/python-2/pyopenssl not included 0.11 library/python-2/subversion 1.6.16 1.7.5 library/python-2/tkinter-26 2.6.4 2.6.8 library/python-2/tkinter-27 2.7.1 2.7.3 library/security/nss 4.12.10 4.13.1 library/security/openssl 1.0.0.5 (1.0.0e) 1.0.0.10 (1.0.0j) mail/thunderbird 6.0 10.0.6 network/dns/bind 9.6.3.4.3 9.6.3.7.2 package/pkgbuild not included 1.3.104 print/filter/enscript not included 1.6.4 print/filter/gutenprint 5.2.4 5.2.7 print/lp/filter/foomatic-rip 3.0.2 4.0.15 runtime/java/jre-6 1.6.0.26 1.6.0.35 runtime/java/jre-7 1.7.0.0 1.7.0.7 runtime/perl-512 5.12.3 5.12.4 runtime/python-26 2.6.4 2.6.8 runtime/python-27 2.7.1 2.7.3 runtime/ruby-18 1.8.7.334 1.8.7.357 runtime/tcl-8/tcl-sqlite-3 3.7.6.3 3.7.11 security/compliance/openscap not included 0.8.1 security/nss-utilities 4.12.10 4.13.1 security/sudo 1.8.1.2 1.8.4.5 service/network/dhcp/isc-dhcp 4.1 4.1.0.6 service/network/dns/bind 9.6.3.4.3 9.6.3.7.2 service/network/ftp (ProFTPD) 1.3.3.0.5 1.3.3.0.7 service/network/samba 3.5.10 3.6.6 shell/conflict 0.2004.9.1 0.2010.6.27 shell/pipe-viewer 1.1.4 1.2.0 shell/zsh 4.3.12 4.3.17 system/boot/grub 0.97 1.99 system/font/truetype/liberation 1.4 1.7.2 system/library/freetype-2 2.4.6 2.4.9 system/library/libnet 1.1.2.1 1.1.5 system/management/cim/pegasus 2.9.1 2.11.0 system/management/ipmitool 1.8.10 1.8.11 system/management/wbem/wbemcli 1.3.7 1.3.9.1 system/network/routing/quagga 0.99.8 0.99.19 system/rsyslog not included 6.2.0 terminal/luit 1.1.0 1.1.1 text/convmv 1.14 1.15 text/gawk 3.1.5 3.1.8 text/gnu-grep 2.5.4 2.10 web/browser/firefox 6.0.2 10.0.6 web/browser/links 1.0 1.0.3 web/java-servlet/tomcat 6.0.33 6.0.35 web/php-53 not included 5.3.14 web/php-53/extension/php-apc not included 3.1.9 web/php-53/extension/php-idn not included 0.2.0 web/php-53/extension/php-memcache not included 3.0.6 web/php-53/extension/php-mysql not included 5.3.14 web/php-53/extension/php-pear not included 5.3.14 web/php-53/extension/php-suhosin not included 0.9.33 web/php-53/extension/php-tcpwrap not included 1.1.3 web/php-53/extension/php-xdebug not included 2.2.0 web/php-common not included 11.1 web/proxy/squid 3.1.8 3.1.18 web/server/apache-22 2.2.20 2.2.22 web/server/apache-22/module/apache-sed 2.2.20 2.2.22 web/server/apache-22/module/apache-wsgi not included 3.3 x11/diagnostic/xev 1.1.0 1.2.0 x11/diagnostic/xscope 1.3 1.3.1 x11/documentation/xorg-docs 1.6 1.7 x11/keyboard/xkbcomp 1.2.3 1.2.4 x11/library/libdmx 1.1.1 1.1.2 x11/library/libdrm 2.4.25 2.4.32 x11/library/libfontenc 1.1.0 1.1.1 x11/library/libfs 1.0.3 1.0.4 x11/library/libice 1.0.7 1.0.8 x11/library/libsm 1.2.0 1.2.1 x11/library/libx11 1.4.4 1.5.0 x11/library/libxau 1.0.6 1.0.7 x11/library/libxcb 1.7 1.8.1 x11/library/libxcursor 1.1.12 1.1.13 x11/library/libxdmcp 1.1.0 1.1.1 x11/library/libxext 1.3.0 1.3.1 x11/library/libxfixes 4.0.5 5.0 x11/library/libxfont 1.4.4 1.4.5 x11/library/libxft 2.2.0 2.3.1 x11/library/libxi 1.4.3 1.6.1 x11/library/libxinerama 1.1.1 1.1.2 x11/library/libxkbfile 1.0.7 1.0.8 x11/library/libxmu 1.1.0 1.1.1 x11/library/libxmuu 1.1.0 1.1.1 x11/library/libxpm 3.5.9 3.5.10 x11/library/libxrender 0.9.6 0.9.7 x11/library/libxres 1.0.5 1.0.6 x11/library/libxscrnsaver 1.2.1 1.2.2 x11/library/libxtst 1.2.0 1.2.1 x11/library/libxv 1.0.6 1.0.7 x11/library/libxvmc 1.0.6 1.0.7 x11/library/libxxf86vm 1.1.1 1.1.2 x11/library/mesa 7.10.2 7.11.2 x11/library/toolkit/libxaw7 1.0.9 1.0.11 x11/library/toolkit/libxt 1.0.9 1.1.3 x11/library/xtrans 1.2.6 1.2.7 x11/oclock 1.0.2 1.0.3 x11/server/xdmx 1.10.3 1.12.2 x11/server/xephyr 1.10.3 1.12.2 x11/server/xorg 1.10.3 1.12.2 x11/server/xorg/driver/xorg-input-keyboard 1.6.0 1.6.1 x11/server/xorg/driver/xorg-input-mouse 1.7.1 1.7.2 x11/server/xorg/driver/xorg-input-synaptics 1.4.1 1.6.2 x11/server/xorg/driver/xorg-input-vmmouse 12.7.0 12.8.0 x11/server/xorg/driver/xorg-video-ast 0.91.10 0.93.10 x11/server/xorg/driver/xorg-video-ati 6.14.1 6.14.4 x11/server/xorg/driver/xorg-video-cirrus 1.3.2 1.4.0 x11/server/xorg/driver/xorg-video-dummy 0.3.4 0.3.5 x11/server/xorg/driver/xorg-video-intel 2.10.0 2.18.0 x11/server/xorg/driver/xorg-video-mach64 6.9.0 6.9.1 x11/server/xorg/driver/xorg-video-mga 1.4.13 1.5.0 x11/server/xorg/driver/xorg-video-openchrome 0.2.904 0.2.905 x11/server/xorg/driver/xorg-video-r128 6.8.1 6.8.2 x11/server/xorg/driver/xorg-video-trident 1.3.4 1.3.5 x11/server/xorg/driver/xorg-video-vesa 2.3.0 2.3.1 x11/server/xorg/driver/xorg-video-vmware 11.0.3 12.0.2 x11/server/xserver-common 1.10.3 1.12.2 x11/server/xvfb 1.10.3 1.12.2 x11/server/xvnc 1.0.90 1.1.0 x11/session/sessreg 1.0.6 1.0.7 x11/session/xauth 1.0.6 1.0.7 x11/session/xinit 1.3.1 1.3.2 x11/transset 0.9.1 1.0.0 x11/trusted/trusted-xorg 1.10.3 1.12.2 x11/x11-window-dump 1.0.4 1.0.5 x11/xclipboard 1.1.1 1.1.2 x11/xclock 1.0.5 1.0.6 x11/xfd 1.1.0 1.1.1 x11/xfontsel 1.0.3 1.0.4 x11/xfs 1.1.1 1.1.2 P.S. To get the version numbers for this table, I ran a quick perl script over the output from: % pkg contents -H -r -t depend -a type=incorporate -o fmri \ `pkg contents -H -r -t depend -a type=incorporate -o fmri [email protected],5.11-0.175.1.0.0.24` \ | sort /tmp/11.1 % pkg contents -H -r -t depend -a type=incorporate -o fmri \ `pkg contents -H -r -t depend -a type=incorporate -o fmri [email protected],5.11-0.175.0.0.0.2` \ | sort /tmp/11.0

    Read the article

  • Windows Azure Evolution &ndash; Caching (Preview)

    - by Shaun
    Caching is a popular topic when we are building a high performance and high scalable system not only on top of the cloud platform but the on-premise environment as well. On March 2011 the Windows Azure AppFabric Caching had been production launched. It provides an in-memory, distributed caching service over the cloud. And now, in this June 2012 update, the cache team announce a grand new caching solution on Windows Azure, which is called Windows Azure Caching (Preview). And the original Windows Azure AppFabric Caching was renamed to Windows Azure Shared Caching.   What’s Caching (Preview) If you had been using the Shared Caching you should know that it is constructed by a bunch of cache servers. And when you want to use you should firstly create a cache account from the developer portal and specify the size you want to use, which means how much memory you can use to store your data that wanted to be cached. Then you can add, get and remove them through your code through the cache URL. The Shared Caching is a multi-tenancy system which host all cached items across all users. So you don’t know which server your data was located. This caching mode works well and can take most of the cases. But it has some problems. The first one is the performance. Since the Shared Caching is a multi-tenancy system, which means all cache operations should go through the Shared Caching gateway and then routed to the server which have the data your are looking for. Even though there are some caches in the Shared Caching system it also takes time from your cloud services to the cache service. Secondary, the Shared Caching service works as a block box to the developer. The only thing we know is my cache endpoint, and that’s all. Someone may satisfied since they don’t want to care about anything underlying. But if you need to know more and want more control that’s impossible in the Shared Caching. The last problem would be the price and cost-efficiency. You pay the bill based on how much cache you requested per month. But when we host a web role or worker role, it seldom consumes all of the memory and CPU in the virtual machine (service instance). If using Shared Caching we have to pay for the cache service while waste of some of our memory and CPU locally. Since the issues above Microsoft offered a new caching mode over to us, which is the Caching (Preview). Instead of having a separated cache service, the Caching (Preview) leverage the memory and CPU in our cloud services (web role and worker role) as the cache clusters. Hence the Caching (Preview) runs on the virtual machines which hosted or near our cloud applications. Without any gateway and routing, since it located in the same data center and same racks, it provides really high performance than the Shared Caching. The Caching (Preview) works side-by-side to our application, initialized and worked as a Windows Service running in the virtual machines invoked by the startup tasks from our roles, we could get more information and control to them. And since the Caching (Preview) utilizes the memory and CPU from our existing cloud services, so it’s free. What we need to pay is the original computing price. And the resource on each machines could be used more efficiently.   Enable Caching (Preview) It’s very simple to enable the Caching (Preview) in a cloud service. Let’s create a new windows azure cloud project from Visual Studio and added an ASP.NET Web Role. Then open the role setting and select the Caching page. This is where we enable and configure the Caching (Preview) on a role. To enable the Caching (Preview) just open the “Enable Caching (Preview Release)” check box. And then we need to specify which mode of the caching clusters we want to use. There are two kinds of caching mode, co-located and dedicate. The co-located mode means we use the memory in the instances we run our cloud services (web role or worker role). By using this mode we must specify how many percentage of the memory will be used as the cache. The default value is 30%. So make sure it will not affect the role business execution. The dedicate mode will use all memory in the virtual machine as the cache. In fact it will reserve some for operation system, azure hosting etc.. But it will try to use as much as the available memory to be the cache. As you can see, the Caching (Preview) was defined based on roles, which means all instances of this role will apply the same setting and play as a whole cache pool, and you can consume it by specifying the name of the role, which I will demonstrate later. And in a windows azure project we can have more than one role have the Caching (Preview) enabled. Then we will have more caches. For example, let’s say I have a web role and worker role. The web role I specified 30% co-located caching and the worker role I specified dedicated caching. If I have 3 instances of my web role and 2 instances of my worker role, then I will have two caches. As the figure above, cache 1 was contributed by three web role instances while cache 2 was contributed by 2 worker role instances. Then we can add items into cache 1 and retrieve it from web role code and worker role code. But the items stored in cache 1 cannot be retrieved from cache 2 since they are isolated. Back to our Visual Studio we specify 30% of co-located cache and use the local storage emulator to store the cache cluster runtime status. Then at the bottom we can specify the named caches. Now we just use the default one. Now we had enabled the Caching (Preview) in our web role settings. Next, let’s have a look on how to consume our cache.   Consume Caching (Preview) The Caching (Preview) can only be consumed by the roles in the same cloud services. As I mentioned earlier, a cache contributed by web role can be connected from a worker role if they are in the same cloud service. But you cannot consume a Caching (Preview) from other cloud services. This is different from the Shared Caching. The Shared Caching is opened to all services if it has the connection URL and authentication token. To consume the Caching (Preview) we need to add some references into our project as well as some configuration in the Web.config. NuGet makes our life easy. Right click on our web role project and select “Manage NuGet packages”, and then search the package named “WindowsAzure.Caching”. In the package list install the “Windows Azure Caching Preview”. It will download all necessary references from the NuGet repository and update our Web.config as well. Open the Web.config of our web role and find the “dataCacheClients” node. Under this node we can specify the cache clients we are going to use. For each cache client it will use the role name to identity and find the cache. Since we only have this web role with the Caching (Preview) enabled so I pasted the current role name in the configuration. Then, in the default page I will add some code to show how to use the cache. I will have a textbox on the page where user can input his or her name, then press a button to generate the email address for him/her. And in backend code I will check if this name had been added in cache. If yes I will return the email back immediately. Otherwise, I will sleep the tread for 2 seconds to simulate the latency, then add it into cache and return back to the page. 1: protected void btnGenerate_Click(object sender, EventArgs e) 2: { 3: // check if name is specified 4: var name = txtName.Text; 5: if (string.IsNullOrWhiteSpace(name)) 6: { 7: lblResult.Text = "Error. Please specify name."; 8: return; 9: } 10:  11: bool cached; 12: var sw = new Stopwatch(); 13: sw.Start(); 14:  15: // create the cache factory and cache 16: var factory = new DataCacheFactory(); 17: var cache = factory.GetDefaultCache(); 18:  19: // check if the name specified is in cache 20: var email = cache.Get(name) as string; 21: if (email != null) 22: { 23: cached = true; 24: sw.Stop(); 25: } 26: else 27: { 28: cached = false; 29: // simulate the letancy 30: Thread.Sleep(2000); 31: email = string.Format("{0}@igt.com", name); 32: // add to cache 33: cache.Add(name, email); 34: } 35:  36: sw.Stop(); 37: lblResult.Text = string.Format( 38: "Cached = {0}. Duration: {1}s. {2} => {3}", 39: cached, sw.Elapsed.TotalSeconds.ToString("0.00"), name, email); 40: } The Caching (Preview) can be used on the local emulator so we just F5. The first time I entered my name it will take about 2 seconds to get the email back to me since it was not in the cache. But if we re-enter my name it will be back at once from the cache. Since the Caching (Preview) is distributed across all instances of the role, so we can scaling-out it by scaling-out our web role. Just use 2 instances and tweak some code to show the current instance ID in the page, and have another try. Then we can see the cache can be retrieved even though it was added by another instance.   Consume Caching (Preview) Across Roles As I mentioned, the Caching (Preview) can be consumed by all other roles within the same cloud service. For example, let’s add another web role in our cloud solution and add the same code in its default page. In the Web.config we add the cache client to one enabled in the last role, by specifying its role name here. Then we start the solution locally and go to web role 1, specify the name and let it generate the email to us. Since there’s no cache for this name so it will take about 2 seconds but will save the email into cache. And then we go to web role 2 and specify the same name. Then you can see it retrieve the email saved by the web role 1 and returned back very quickly. Finally then we can upload our application to Windows Azure and test again. Make sure you had changed the cache cluster status storage account to the real azure account.   More Awesome Features As a in-memory distributed caching solution, the Caching (Preview) has some fancy features I would like to highlight here. The first one is the high availability support. This is the first time I have heard that a distributed cache support high availability. In the distributed cache world if a cache cluster was failed, the data it stored will be lost. This behavior was introduced by Memcached and is followed by almost all distributed cache productions. But Caching (Preview) provides high availability, which means you can specify if the named cache will be backup automatically. If yes then the data belongs to this named cache will be replicated on another role instance of this role. Then if one of the instance was failed the data can be retrieved from its backup instance. To enable the backup just open the Caching page in Visual Studio. In the named cache you want to enable backup, change the Backup Copies value from 0 to 1. The value of Backup Copies only for 0 and 1. “0” means no backup and no high availability while “1” means enabled high availability with backup the data into another instance. But by using the high availability feature there are something we need to make sure. Firstly the high availability does NOT means the data in cache will never be lost for any kind of failure. For example, if we have a role with cache enabled that has 10 instances, and 9 of them was failed, then most of the cached data will be lost since the primary and backup instance may failed together. But normally is will not be happened since MS guarantees that it will use the instance in the different fault domain for backup cache. Another one is that, enabling the backup means you store two copies of your data. For example if you think 100MB memory is OK for cache, but you need at least 200MB if you enabled backup. Besides the high availability, the Caching (Preview) support more features introduced in Windows Server AppFabric Caching than the Windows Azure Shared Caching. It supports local cache with notification. It also support absolute and slide window expiration types as well. And the Caching (Preview) also support the Memcached protocol as well. This means if you have an application based on Memcached, you can use Caching (Preview) without any code changes. What you need to do is to change the configuration of how you connect to the cache. Similar as the Windows Azure Shared Caching, MS also offers the out-of-box ASP.NET session provider and output cache provide on top of the Caching (Preview).   Summary Caching is very important component when we building a cloud-based application. In the June 2012 update MS provides a new cache solution named Caching (Preview). Different from the existing Windows Azure Shared Caching, Caching (Preview) runs the cache cluster within the role instances we have deployed to the cloud. It gives more control, more performance and more cost-effect. So now we have two caching solutions in Windows Azure, the Shared Caching and Caching (Preview). If you need a central cache service which can be used by many cloud services and web sites, then you have to use the Shared Caching. But if you only need a fast, near distributed cache, then you’d better use Caching (Preview).   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

    Read the article

  • AngularJs ng-cloak Problems on large Pages

    - by Rick Strahl
    I’ve been working on a rather complex and large Angular page. Unlike a typical AngularJs SPA style ‘application’ this particular page is just that: a single page with a large amount of data on it that has to be visible all at once. The problem is that when this large page loads it flickers and displays template markup briefly before kicking into its actual content rendering. This is is what the Angular ng-cloak is supposed to address, but in this case I had no luck getting it to work properly. This application is a shop floor app where workers need to see all related information in one big screen view, so some of the benefits of Angular’s routing and view swapping features couldn’t be applied. Instead, we decided to have one very big view but lots of ng-controllers and directives to break out the logic for code separation. For code separation this works great – there are a number of small controllers that deal with their own individual and isolated application concerns. For HTML separation we used partial ASP.NET MVC Razor Views which made breaking out the HTML into manageable pieces super easy and made migration of this page from a previous server side Razor page much easier. We were also able to leverage most of our server side localization without a lot of  changes as a bonus. But as a result of this choice the initial HTML document that loads is rather large – even without any data loaded into it, resulting in a fairly large DOM tree that Angular must manage. Large Page and Angular Startup The problem on this particular page is that there’s quite a bit of markup – 35k’s worth of markup without any data loaded, in fact. It’s a large HTML page with a complex DOM tree. There are quite a lot of Angular {{ }} markup expressions in the document. Angular provides the ng-cloak directive to try and hide the element it cloaks so that you don’t see the flash of these markup expressions when the page initially loads before Angular has a chance to render the data into the markup expressions.<div id="mainContainer" class="mainContainer boxshadow" ng-app="app" ng-cloak> Note the ng-cloak attribute on this element, which here is an outer wrapper element of the most of this large page’s content. ng-cloak is supposed to prevent displaying the content below it, until Angular has taken control and is ready to render the data into the templates. Alas, with this large page the end result unfortunately is a brief flicker of un-rendered markup which looks like this: It’s brief, but plenty ugly – right?  And depending on the speed of the machine this flash gets more noticeable with slow machines that take longer to process the initial HTML DOM. ng-cloak Styles ng-cloak works by temporarily hiding the marked up element and it does this by essentially applying a style that does this:[ng\:cloak], [ng-cloak], [data-ng-cloak], [x-ng-cloak], .ng-cloak, .x-ng-cloak { display: none !important; } This style is inlined as part of AngularJs itself. If you looking at the angular.js source file you’ll find this at the very end of the file:!angular.$$csp() && angular.element(document) .find('head') .prepend('<style type="text/css">@charset "UTF-8";[ng\\:cloak],[ng-cloak],' + '[data-ng-cloak],[x-ng-cloak],.ng-cloak,.x-ng-cloak,' + '.ng-hide{display:none !important;}ng\\:form{display:block;}' '.ng-animate-block-transitions{transition:0s all!important;-webkit-transition:0s all!important;}' + '</style>'); This is is meant to initially hide any elements that contain the ng-cloak attribute or one of the other Angular directive permutation markup. Unfortunately on this particular web page ng-cloak had no effect – I still see the flicker. Why doesn’t ng-cloak work? The problem is of course – timing. The problem is that Angular actually needs to get control of the page before it ever starts doing anything like process even the ng-cloak attribute (or style etc). Because this page is rather large (about 35k of non-data HTML) it takes a while for the DOM to actually plow through the HTML. With the Angular <script> tag defined at the bottom of the page after the HTML DOM content there’s a slight delay which causes the flicker. For smaller pages the initial DOM load/parse cycle is so fast that the markup never shows, but with larger content pages it may show and become an annoying problem. Workarounds There a number of simple ways around this issue and some of them are hinted on in the Angular documentation. Load Angular Sooner One obvious thing that would help with this is to load Angular at the top of the page  BEFORE the DOM loads and that would give it much earlier control. The old ng-cloak documentation actually recommended putting the Angular.js script into the header of the page (apparently this was recently removed), but generally it’s not a good practice to load scripts in the header for page load performance. This is especially true if you load other libraries like jQuery which should be loaded prior to loading Angular so it can use jQuery rather than its own jqLite subset. This is not something I normally would like to do and also something that I’d likely forget in the future and end up right back here :-). Use ng-include for Child Content Angular supports nesting of child templates via the ng-include directive which essentially delay loads HTML content. This helps by removing a lot of the template content out of the main page and so getting control to Angular a lot sooner in order to hide the markup template content. In the application in question, I realize that in hindsight it might have been smarter to break this page out with client side ng-include directives instead of MVC Razor partial views we used to break up the page sections. Razor partial views give that nice separation as well, but in the end Razor puts humpty dumpty (ie. the HTML) back together into a whole single and rather large HTML document. Razor provides the logical separation, but still results in a large physical result document. But Razor also ended up being helpful to have a few security related blocks handled via server side template logic that simply excludes certain parts of the UI the user is not allowed to see – something that you can’t really do with client side exclusion like ng-hide/ng-show – client side content is always there whereas on the server side you can simply not send it to the client. Another reason I’m not a huge fan of ng-include is that it adds another HTTP hit to a request as templates are loaded from the server dynamically as needed. Given that this page was already heavy with resources adding another 10 separate ng-include directives wouldn’t be beneficial :-) ng-include is a valid option if you start from scratch and partition your logic. Of course if you don’t have complex pages, having completely separate views that are swapped in as they are accessed are even better, but we didn’t have this option due to the information having to be on screen all at once. Avoid using {{ }}  Expressions The biggest issue that ng-cloak attempts to address isn’t so much displaying the original content – it’s displaying empty {{ }} markup expression tags that get embedded into content. It gives you the dreaded “now you see it, now you don’t” effect where you sometimes see three separate rendering states: Markup junk, empty views, then views filled with data. If we can remove {{ }} expressions from the page you remove most of the perceived double draw effect as you would effectively start with a blank form and go straight to a filled form. To do this you can forego {{ }}  expressions and replace them with ng-bind directives on DOM elements. For example you can turn:<div class="list-item-name listViewOrderNo"> <a href='#'>{{lineItem.MpsOrderNo}}</a> </div>into:<div class="list-item-name listViewOrderNo"> <a href="#" ng-bind="lineItem.MpsOrderNo"></a> </div> to get identical results but because the {{ }}  expression has been removed there’s no double draw effect for this element. Again, not a great solution. The {{ }} syntax sure reads cleaner and is more fluent to type IMHO. In some cases you may also not have an outer element to attach ng-bind to which then requires you to artificially inject DOM elements into the page. This is especially painful if you have several consecutive values like {{Firstname}} {{Lastname}} for example. It’s an option though especially if you think of this issue up front and you don’t have a ton of expressions to deal with. Add the ng-cloak Styles manually You can also explicitly define the .css styles that Angular injects via code manually in your application’s style sheet. By doing so the styles become immediately available and so are applied right when the page loads – no flicker. I use the minimal:[ng-cloak] { display: none !important; } which works for:<div id="mainContainer" class="mainContainer dialog boxshadow" ng-app="app" ng-cloak> If you use one of the other combinations add the other CSS selectors as well or use the full style shown earlier. Angular will still load its version of the ng-cloak styling but it overrides those settings later, but this will do the trick of hiding the content before that CSS is injected into the page. Adding the CSS in your own style sheet works well, and is IMHO by far the best option. The nuclear option: Hiding the Content manually Using the explicit CSS is the best choice, so the following shouldn’t ever be necessary. But I’ll mention it here as it gives some insight how you can hide/show content manually on load for other frameworks or in your own markup based templates. Before I figured out that I could explicitly embed the CSS style into the page, I had tried to figure out why ng-cloak wasn’t doing its job. After wasting an hour getting nowhere I finally decided to just manually hide and show the container. The idea is simple – initially hide the container, then show it once Angular has done its initial processing and removal of the template markup from the page. You can manually hide the content and make it visible after Angular has gotten control. To do this I used:<div id="mainContainer" class="mainContainer boxshadow" ng-app="app" style="display:none"> Notice the display: none style that explicitly hides the element initially on the page. Then once Angular has run its initialization and effectively processed the template markup on the page you can show the content. For Angular this ‘ready’ event is the app.run() function:app.run( function ($rootScope, $location, cellService) { $("#mainContainer").show(); … }); This effectively removes the display:none style and the content displays. By the time app.run() fires the DOM is ready to displayed with filled data or at least empty data – Angular has gotten control. Edge Case Clearly this is an edge case. In general the initial HTML pages tend to be reasonably sized and the load time for the HTML and Angular are fast enough that there’s no flicker between the rendering times. This only becomes an issue as the initial pages get rather large. Regardless – if you have an Angular application it’s probably a good idea to add the CSS style into your application’s CSS (or a common shared one) just to make sure that content is always hidden. You never know how slow of a browser somebody might be running and while your super fast dev machine might not show any flicker, grandma’s old XP box very well might…© Rick Strahl, West Wind Technologies, 2005-2014Posted in Angular  JavaScript  CSS  HTML   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • CodePlex Daily Summary for Tuesday, March 27, 2012

    CodePlex Daily Summary for Tuesday, March 27, 2012Popular ReleasesHarness: Harness 2.0.2: change to .NET Framework Client Profile bug fix the download dialog auto answer. bug fix setFocus command. add "SendKeys" command. remove "closeAll" command. minor bugs fixed.BugNET Issue Tracker: BugNET 0.9.161: Below is a list of fixes in this release. Bug BGN-2092 - Link in Email "visit your profile" not functional BGN-2083 - Manager of bugnet can not edit project when it is not public BGN-2080 - clicking on a link in the project summary causes error (0.9.152.0) BGN-2070 - Missing Functionality On Feed.aspx BGN-2069 - Calendar View does not work BGN-2068 - Time tracking totals not ok BGN-2067 - Issues List Page Size Bug: Index was out of range. Must be non-negative and less than the si...YAF.NET (aka Yet Another Forum.NET): v1.9.6.1 RTW: v1.9.6.1 FINAL is .NET v4.0 ONLY v1.9.6.1 has: Performance Improvements .NET v4.0 improvements Improved FaceBook Integration More complete change list and discussion here: http://forum.yetanotherforum.net/yaf_postst14201_v1-9-6-1-RTW-Dated--3-26-2012.aspxQuick Performance Monitor: Version 1.8.1: Added option to set main window to be 'Always On Top'. Use context (right-click) menu on graph to toggle.Asp.NET Url Router: v1.0: build for .net 2.0 and .net 4.0SQLinq - use LINQ to generate Ad-Hoc Sql Queries: SQLinq v1.1: Nuget Package:http://nuget.org/packages/sqlinq Install SQLinq via Nuget Change Log:Fixed "SELECT *" bug when no selector is specified Added ".Take(int)" and ".Skip(int)" methods to support paging Added ability to specify "ORDER BY"DbViewSharp: Sql Compact Edition plugins: The SQL CE plugins are new assemblies written to allow DbViewSharp to work with SQL Compact Edition databases. Some features available for Sql Server databases are unavailable because of restrictions in the Compact Edition engine. However there are plans to add different new features as compensation for this. See the Sql CE Plugin page for more details.TileSet Map Editor: Map Creator: can add maps/ layers can use only 1 tileset for now Have Save/Load Logics... added Fill Copy and Paste working towards better code and more optionsBagammon pc player: Baggamon pc player v.1.3: This a source code of a project "tool-game" Bagammon pc player. It has bug. Please do not fix them. Thank you. For your information : "If you want to use it buy it. Send an email."openSourceC.Daylife: Release v1.0a: This is a minor bug fix release with some minor internal refactoring as well. The Documentation page has some code samples that show how to use the library. If you discover any issues with this release, please check the existing Discussions and Issues to see if the issue has already been reported, and if not, create a new discussion with the details of the issue.menu4web: menu4web 0.0.3: menu4web 0.0.3Windawesome: Windawesome v1.4.0 x86: Added a SeparatorWidget. Implemented some xmonad-like functionality for multiple-monitors - see SwapCurrentWorkspaceWith, SwitchToNextMonitor and SwitchToPreviousMonitor. Thanks to mkocubinski for the idea and some of the implementation. Implemented AddBarToWorkspace and RemoveBarFromWorkspace. Small performance improvements. Any issues/recommendations/requests for future versions? This is the 32-bit version of the release. If you use a 32-bit Windows, this is the release you should u...Navigation for ASP.NET Web Forms: Navigation 1.4: Navigation for ASP.NET Web Forms manages movement and data passing between ASPX pages in a unit-testable manner. There is no client-side logic, so it works in all browsers, and no server-side cache, so it works with the browser back button. Comprehensive documentation and sample code can be found under the Documentation tab (Make sure to unblock all zip files prior to extraction) New - Added default State NavigationData. Supports strongly typed values and routing defaults New - Added mobi...Afrihost Usage Monitoring Gadget: Afrihost Gadget 1.2.0: This is the stable current download: Changes: Added support for Uncapped accounts. Added support for IS Uncapped Accounts.ArcGIS Editor for OpenStreetMap: ArcGIS Editor for OSM 2.0 Final: This release installs both the ArcGIS Editor for OSM Server Component and/or ArcGIS Editor for OSM Desktop components. The Desktop tools allow you to download data from the OpenStreetMap servers and store it locally in a geodatabase. You can then use the familiar editing environment of ArcGIS Desktop to create, modify, or delete data. Once you are done editing, you can post back the edit changes to OSM to make them available to all OSM users. The Server Component allows you to quickly create...Craig's Utility Library: Craig's Utility Library 3.1: This update adds about 60 new extension methods, a couple of new classes, and a number of fixes including: Additions Added DateSpan class Added GenericDelimited class Random additions Added static thread friendly version of Random.Next called ThreadSafeNext. AOP Manager additions Added Destroy function to AOPManager (clears out all data so system can be recreated. Really only useful for testing...) ORM additions Added PagedCommand and PageCount functions to ObjectBaseClass (same as M...DotSpatial: DotSpatial 1.1: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components are available as NuGet pa...Microsoft All-In-One Code Framework - a centralized code sample library: C++, .NET Coding Guideline: Microsoft All-In-One Code Framework Coding Guideline This document describes the coding style guideline for native C++ and .NET (C# and VB.NET) programming used by the Microsoft All-In-One Code Framework project team.WebDAV for WHS: Version 1.0.67: - Added: Check whether the Remote Web Access is turned on or not; - Added: Check for Add-In updates;Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (March 2012) for .NET 4.0: March release of Phalanger 3.0 significantly enhances performance, adds new features and fixes many issues. See following for the list of main improvements: New features: Phalanger Tools installable for Visual Studio 2011 Beta "filter" extension with several most used filters implemented DomDocument HTML parser, loadHTML() method mail() PHP compatible function PHP 5.4 T_CALLABLE token PHP 5.4 "callable" type hint PCRE: UTF32 characters in range support configuration supports <c...New Projects(MVC4) Character Creation: A simple web site to manage your Avalon CharactersAmfSample: Sample projectBismillah Quran Reader for Wp7: Bismillah Quran Reader is an application for reading Quran translations in WP7. Translations can be read in various languages. Also recitations can be listened to.BlogEngine Mvc: This is an MVC version of BlogEngine.net. Project Description Our plan is to convert the whole BlogEngine.NET into an MVC application by the end of June 2012. It's developed in C# ASP.NET MVC3.Db7: Db7EF4.3 Code First and Migration Sample: EF4.3 Code First and Migration Sampleemoji for windows phone: This project is a windows phone 7 enmoji libary.Excel Document Merger: Excel Document Merger is a utility for combining multiple Excel workbooks and worksheets into a single workbook.exceladdin: exceladdinfastBinaryJSON: Binary JSON serializer based on fastJSONFontographer: A metro style WPF app to demonstrate the capabilites of the fonts on the users systemGonte Web Desktop: Another web desktop using ExtJs javascript frameworkIndoor Cricket Stats: Indoor Cricket StatsKernel32 C# wrapper: Kernel32.dll C# wrapper. Mostly done for threading, pipes, mutexes and other stuff. Not all methods implemented.Live for Desktop: A simple app that lets you browse you Live accout from a webbrowser integrated in the software. Future version will also include a custom interface and a Metro style look.LogoScriptIDE: IDE for LogoScript, A logo and C like scripting languageMcCloud Service Framework: Monte Carlo Cloud Service Framework (McCloud) provides a generic service implementation of Monte Carlo method, based on Microsoft Windows Azure, to solve a wide range of scientific and engineering problems.NetView Control for Microsoft Access: A native control for Microsoft Access forms to display and interact with non-hierarchical data.Polygon: Polygon is a UI composition framework for ASP.NET Web Forms. It can be used for third-party plugin extensibility of ASP.NET Web Forms applications. Though it's developed in C#, plugins can also done in VB as well.Programmeerproject-LambdaOffice: Architectural project. Takes input from the user and prints it to various fileformats such as .docx and .pdfQuick Job Seeker: Final project of computer scienceSchool Education Management: Project Description School Management System helps schools in managing student's data. It is targeted for colleges in the Philippines. It is developed in ASp.Net MVC3 and uses SQL Server as the database. The system is divided into several modules: 1. Registrar Module - used by the Registrar. 2. Scheduling Module - used by Deans for creating course offerings schedule 3. Cashiering Module - used by the Accounting Department 4. Grading Entry Module - used by teachers for encoding grade...Sharepoint Carousel: Sharepoint Carousel\Slider is a webpart that allows you to have a carousel that contains an image with a link below it. it is fully customisable from styles to the actual javascript that generates the slider data it has currently only been tested with sharepoint 2010 This is carousel\slider for sharepoint is built of the JCarousel http://sorgalla.com/jcarousel/.Sieena Dashboard: Metro UI DashboardSimple Redirect Module for DotNetNuke: This module allows content editors in DotNetNuke to have a simple and easy way to properly redirect incoming URLs that are incorrectly indexed by search engines.software de entrenador 2.0: software de entrenador es un Programa diseñado para entrenadores de musculacion y personas cuyo proposito es mejorar en sus entrenamientos y desean llevar un control del mismo a modo de diario.Sqlite Loader: Tool to Import/Export data to an Sqlite database using CSV, XML with a GUI written in C#TestProject_Mercurial: Test Project with MercuriaTestProject_TFS: the test project with tfsThinkPHP-??、???PHP????: ??WEB??????,?????WEB?????? Twesh Ajax: TweshAjax is clientside javascript library for making asynchronous calls to server.UserProfilePropertiesSync: This utility allows to synchronize User Profile properties between different SharePoint 2010 environments.VRacer: Vektor Car racing on windows phone.Workflow Foundation State Machine Service: This is a sample project for workflow foundation 4 state machine exposed as a WCF serviceWPZilla: Bugzilla client for Windows Phone 7.1 and up.XNA GPU Particles Tool: This is a tool to help create particle effects based on the sample shaders provided in the XNA education catalogue. View the changes to the parameters in real time.Y.Music: Y.Music - ??? ?????? ??? ??????? ??????.?????? ???????? ??????. ?? ????????? ?? ??????? ???-??????? ????????? ??????????. ? ???? ?? ?? ?????????? ??????? ?????? ?????????? ?????? ? ????????????? ??????? ? ????????? ? ?????????. ????????? ?????????? ?? WPF/?#/.NET. ????? ? ??? ???????????? ?????????? NAudio ? Fluent Ribbon.

    Read the article

  • CodePlex Daily Summary for Tuesday, February 15, 2011

    CodePlex Daily Summary for Tuesday, February 15, 2011Popular ReleasesAllNewsManager.NET: AllNewsManager.NET 1.3: AllNewsManager.NET 1.3. This new version provide several new features, improvements and bug fixes. Some new features: Online Users. Avatars. Copy function (to create a new article from another one). SEO improvements (friendly urls). New admin buttons. And more...Comet - Visual Studio 2010 Addin: Installers: Offers the basic functionality of generating constructors from data members or from superclass. The current release does not respect the user's indentation preferences.Facebook Graph Toolkit: Facebook Graph Toolkit 0.8: Version 0.8 (15 Feb 2011)moved to Beta stage publish photo feature "email" field of User object added new Graph Api object: Group, Event new Graph Api connection: likes, groups, eventsDJME - The jQuery extensions for ASP.NET MVC: DJME2 -The jQuery extensions for ASP.NET MVC beta2: The source code and runtime library for DJME2. For more product info you can goto http://www.dotnetage.com/djme.html What is new ?The Grid extension added The ModelBinder added which helping you create Bindable data Action. The DnaFor() control factory added that enabled Model bindable extensions. Enhance the ListBox , ComboBox data binding.Jint - Javascript Interpreter for .NET: Jint - 0.9.0: New CLR interoperability features Many bugfixesBuild Version Increment Add-In Visual Studio: Build Version Increment v2.4.11046.2045: v2.4.11046.2045 Fixes and/or Improvements:Major: Added complete support for VC projects including .vcxproj & .vcproj. All padding issues fixed. A project's assembly versions are only changed if the project has been modified. Minor Order of versioning style values is now according to their respective positions in the attributes i.e. Major, Minor, Build, Revision. Fixed issue with global variable storage with some projects. Fixed issue where if a project item's file does not exist, a ...Document.Editor: 2011.4: Whats new for Document.Editor 2011.4: New Subscript support New Superscript support New column display in statusbar Improved dialogs Minor Bug Fix's, improvements and speed upsCoding4Fun Tools: Coding4Fun.Phone.Toolkit v1.1: Coding4Fun.Phone.Toolkit v1.1 release. Bug fixes and minor feature requests addedTV4Home - The all-in-one TV solution!: 0.1.0.0 Preview: This is the beta preview release of the TV4Home software.Finestra Virtual Desktops: 1.2: Fixes a few minor issues with 1.1 including the broken per-desktop backgrounds Further improves the speed of switching desktops A few UI performance improvements Added donations linksNuGet: NuGet 1.1: NuGet is a free, open source developer focused package management system for the .NET platform intent on simplifying the process of incorporating third party libraries into a .NET application during development. This release is a Visual Studio 2010 extension and contains the the Package Manager Console and the Add Package Dialog. The URL to the package OData feed is: http://go.microsoft.com/fwlink/?LinkID=206669 To see the list of issues fixed in this release, visit this our issues listEnhSim: EnhSim 2.4.0: 2.4.0This release supports WoW patch 4.06 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 Changes since 2.3.0 - Upd...Sterling Isolated Storage Database with LINQ for Silverlight and Windows Phone 7: Sterling OODB v1.0: Note: use this changeset to download the source example that has been extended to show database generation, backup, and restore in the desktop example. Welcome to the Sterling 1.0 RTM. This version is not backwards-compatible with previous versions of Sterling. Sterling is also available via NuGet. This product has been used and tested in many applications and contains a full suite of unit tests. You can refer to the User's Guide for complete documentation, and use the unit tests as guide...PDF Rider: PDF Rider 0.5.1: Changes from the previous version * Use dynamic layout to better fit text in other languages * Includes French and Spanish localizations Prerequisites * Microsoft Windows Operating Systems (XP - Vista - 7) * Microsoft .NET Framework 3.5 runtime * A PDF rendering software (i.e. Adobe Reader) that can be opened inside Internet Explorer. Installation instructionsChoose one of the following methods: 1. Download and run the "pdfRider0.5.1-setup.exe" (reccomended) 2. Down...Snoop, the WPF Spy Utility: Snoop 2.6.1: This release is a bug fixing release. Most importantly, issues have been seen around WPF 4.0 applications not always showing up in the app chooser. Hopefully, they are fixed now. I thought this issue warranted a minor release since more and more people are going WPF 4.0 and I don't want anyone to have any problems. Dan Hanan also contributes again with several usability features. Thanks Dan! Happy Snooping! p.s. By request, I am also attaching a .zip file ... so that people can install it ...RIBA - Rich Internet Business Application for Silverlight: Preview of MVVM Framework Source + Tutorials: This is a first public release of the MVVM Framework which is part of the final RIBA application. The complete RIBA example LOB application has yet to be published. Further Documentation on the MVVM part can be found on the Blog, http://www.SilverlightBlog.Net and in the downloadable source ( mvvm/doc/ ). Please post all issues and suggestions in the issue tracker.SharePoint Learning Kit: 1.5: SharePoint Learning Kit 1.5 has the following new functionality: *Support for SharePoint 2010 *E-Learning Actions can be localised *Two New Document Library Edit Options *Automatically add the Assignment List Web Part to the Web Part Gallery *Various Bug Fixes for the Drop Box There are 2 downloads for this release SLK-1.5-2010.zip for SharePoint 2010 SLK-1.5-2007.zip for SharePoint 2007 (WSS3 & MOSS 2007)GMare: GMare Alpha 02: Alpha version 2. With fixes detailed in the issue tracker.Facebook C# SDK: 5.0.3 (BETA): This is fourth BETA release of the version 5 branch of the Facebook C# SDK. Remember this is a BETA build. Some things may change or not work exactly as planned. We are absolutely looking for feedback on this release to help us improve the final 5.X.X release. For more information about this release see the following blog posts: Facebook C# SDK - Writing your first Facebook Application Facebook C# SDK v5 Beta Internals Facebook C# SDK V5.0.0 (BETA) Released We have spend time trying ...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel Template, version 1.0.1.161: The NodeXL Excel template displays a network graph using edge and vertex lists stored in an Excel 2007 or Excel 2010 workbook. What's NewThis release adds a new Twitter List network importer, makes some minor feature improvements, and fixes a few bugs. See the Complete NodeXL Release History for details. Installation StepsFollow these steps to install and use the template: Download the Zip file. Unzip it into any folder. Use WinZip or a similar program, or just right-click the Zip file...New Projects.NET JSON parser & deserializer: JSON.net makes it easy to consume JSON encoded objects in your application. It features a fast parser and deserializer written in C# 2.0 with a simple and intuitive API making integration in your application a breeze Actor Look: Single screen Actor Outlook(ActorLook) for Skelta.Its skelta based work item component.Its providing outlook features like Compose, Inbox,Outbox(which acted by me), My Requests (wf created by me) and generic custom request history tracking.AJAX Mapping Performance Tests: This project contains simple test html pages that compare the performance of Bing Maps V6.3, Bing Maps V7 and Google Maps V3 when displaying increasing numbers of pushpins on a map.Author-it DITA Project: The Author-it DITA Project contains components that enable importing, authoring, and publishing DITA content using Author-it software.Author-it PowerShell Project: The Author-it PowerShell Project provides cmdlets that allow you to interact with Author-it objects using PowerShell scripts.BizTalk Message Decompressor: This tool, written in C#, enables you to decompress BizTalk messages/context from a screen that looks like SQL Query Analyzer. By simple entering a SQL query and some custom functions, you can retrieve (partial) message content and/or context. Handy for administrators/engineers!CavemanTools Mvc: Asp.Net Mvc 3 toolkit for faster development with less code. Features theming support for both Razor and WebForm engines and easy to use helpers. It's developed in C#, .Net 4 .CityLizard XML Schema Pack: The project is for contribution of XML Schemas to CityLizard Framework.crazyKTV: this is a KTV system from TaiwanException Catcher: Exception catcher is a tool, it can attach to any .net process in the system and record all exceptions(including 1st chance exception) thrown in the process.Export Test Cases From TFS: This project lets the users to export the test cases present in form Work items in TFS 2010 to MS Excel.Extended Text Library for Small Basic: This library extend "Text" class of Microsoft Small Basic to append custom methods, such as Split, Replace, and so on. Small Basic ? Text ???? Split ? Replace ????????????、?????????。fossilGui: Gui for fossil (http://www.fossil-scm.org)Gamoliyas: Gamoliyas is an open source John Conway's Game of Life game totally written in DHTML (JavaScript, CSS and HTML). Uses mouse and keyboard. Very configurable. This cross-platform and cross-browser game was tested under BeOS, Linux, *BSD, Windows and others.Gilly Messenger - MSN clone written in VB6: Gilly Messenger is a MSN client built in Visual Basic 6 in 2002-2004 by CrackSoft. It is now open sourced.jetzt liveticker: A desktop version of the liveticker for "jetzt.de", a german online communityLMKTool: LMKTool is a small project that helps users to migrate Thales cryptographic keys from the old LMK to the new LMK set.LocalAdmins WMI Provider: WMI Provider to report all members of the local Administrators group in the WMI Class root\cimv2\Win32_LocalAdminsMarbles CMS: Marbles aims to be a simple Content Management Server for hosting multiple websites.MediaElement Extensions: MediaElement Extensions makes it easier for WPF/SilverLight Developers to interact with MediaElement. You will no longer have to handle media and user events... Controls: ProgressSlider / VolumeSlider / Buttons (Play, Pause, Stop, FullScreen..) Features: PlaylistManagementMessage Router: MessageRouter enables routing of messages in a heterogeneous environment: - ServiceBroker queue - MSMQ - FTP - othersMultiUp: Silverlight application for multiple files upload and recoverymuzoblog: muzoblogMVC 3 con Razor - Mercurial: Proyecto MVC 3 con Razor para trabajar en un proyecto desde cero, con control de código en Mercurial.Opalis Exchange Calendaring Integration Pack: An integration pack for Opalis extending functionality to exchange calendaring features.OpenEMIS: OpenEMIS is a generic open source Education Management Information System (EMIS) developped by UNESCO.PFC2011: My PFC ^^Proyecto español. Aplicacion tpv para bar pub , gestion ... opensource: España Aplicacion tpv para bar pub , gestion ... opensource Datos con XML y resportes con Crystal Reports. Imagen: http://img375.imageshack.us/i/proba1xml.jpg/Realtime C# Pitch Tracker: Use the PitchTracker class to easily track the pitch of a waveform (typically from vocals). It is fast (~3000 detections/sec) and accurate (within 0.02% of the actual frequency). It is written in C#. A sample app is included.SCOM Maintenance Mode Tool: A maintenance mode tool for System Center Operations Manager (SCOM)scooby: This is a scooby dooby doo projectSDSConsulting: Samples, resources, and solutions provided by SDS Consulting.SilverPop: Silverpop is a Silverlight 4, PRISM, MVVM demonstration application that demonstrates basic use of these concepts plus how to visualise data in a diagram. It is an accompaniment to a series of blog posts.Skywave Class Library: Skywave Class Library will contain multiple projects (one at start) targeting classes, interfaces, controls and ... for different .Net technologies like ASP.Net, WPF, Windows Forms, ... and one Core Project including shared classes. It's my shared library of 10 years development.Sofire FX: .NET ???????????,?????????????????,??? Sofire ????????!SQL Server Process Info Log: The SQL Server Process Info Log makes it easier to identify the cause of CPU & Physical Disk resource consumption by facilitating the production of visualizations that help pinpoint the smoking gun.Sup!: IIS7.5 + .NET4 + DLR + JSON.NET = Sup! Replacement for ASP.NET web services. Makes interacting with clients of all types pretty and easy. Right now it's like: "What? I can't hear you. My iPhone sucks." With Sup! it's like: "Sup."sven's msvs addons: A couple quick Visual Studio addons implementing features I missed from other IDEs. The first, MultiLineComments, implements inline comment wrapping as per Matlab. The second, FunctionBar, is a function-list C/C++ file navigation bar inspired by XCode. Both are written in C#.UHEMS: This Web Based Employee Management System With the following modules. 1. Employee Registration 2. Attendance Module 3. Leave Module 4. Payroll Processing 5. Reports 6. Independent User and Admin Registration Module 7. ResignationWebsite Monitor: Website monitorWMI Performance Counter Logging Console App: A demonstration how to create and populate a datawarehouse of WMI counters which can be used to diagnose performance problems. A presentation provided demonstrates how to detect IIS/ASP.NET thread starvation.YuxinProjs: YuxinProjs Hello World

    Read the article

  • The Benefits of Smart Grid Business Software

    - by Sylvie MacKenzie, PMP
    Smart Grid Background What Are Smart Grids?Smart Grids use computer hardware and software, sensors, controls, and telecommunications equipment and services to: Link customers to information that helps them manage consumption and use electricity wisely. Enable customers to respond to utility notices in ways that help minimize the duration of overloads, bottlenecks, and outages. Provide utilities with information that helps them improve performance and control costs. What Is Driving Smart Grid Development? Environmental ImpactSmart Grid development is picking up speed because of the widespread interest in reducing the negative impact that energy use has on the environment. Smart Grids use technology to drive efficiencies in transmission, distribution, and consumption. As a result, utilities can serve customers’ power needs with fewer generating plants, fewer transmission and distribution assets,and lower overall generation. With the possible exception of wind farm sprawl, landscape preservation is one obvious benefit. And because most generation today results in greenhouse gas emissions, Smart Grids reduce air pollution and the potential for global climate change.Smart Grids also more easily accommodate the technical difficulties of integrating intermittent renewable resources like wind and solar into the grid, providing further greenhouse gas reductions. CostsThe ability to defer the cost of plant and grid expansion is a major benefit to both utilities and customers. Utilities do not need to use as many internal resources for traditional infrastructure project planning and management. Large T&D infrastructure expansion costs are not passed on to customers.Smart Grids will not eliminate capital expansion, of course. Transmission corridors to connect renewable generation with customers will require major near-term expenditures. Additionally, in the future, electricity to satisfy the needs of population growth and additional applications will exceed the capacity reductions available through the Smart Grid. At that point, expansion will resume—but with greater overall T&D efficiency based on demand response, load control, and many other Smart Grid technologies and business processes. Energy efficiency is a second area of Smart Grid cost saving of particular relevance to customers. The timely and detailed information Smart Grids provide encourages customers to limit waste, adopt energy-efficient building codes and standards, and invest in energy efficient appliances. Efficiency may or may not lower customer bills because customer efficiency savings may be offset by higher costs in generation fuels or carbon taxes. It is clear, however, that bills will be lower with efficiency than without it. Utility Operations Smart Grids can serve as the central focus of utility initiatives to improve business processes. Many utilities have long “wish lists” of projects and applications they would like to fund in order to improve customer service or ease staff’s burden of repetitious work, but they have difficulty cost-justifying the changes, especially in the short term. Adding Smart Grid benefits to the cost/benefit analysis frequently tips the scales in favor of the change and can also significantly reduce payback periods.Mobile workforce applications and asset management applications work together to deploy assets and then to maintain, repair, and replace them. Many additional benefits result—for instance, increased productivity and fuel savings from better routing. Similarly, customer portals that provide customers with near-real-time information can also encourage online payments, thus lowering billing costs. Utilities can and should include these cost and service improvements in the list of Smart Grid benefits. What Is Smart Grid Business Software? Smart Grid business software gathers data from a Smart Grid and uses it improve a utility’s business processes. Smart Grid business software also helps utilities provide relevant information to customers who can then use it to reduce their own consumption and improve their environmental profiles. Smart Grid Business Software Minimizes the Impact of Peak Demand Utilities must size their assets to accommodate their highest peak demand. The higher the peak rises above base demand: The more assets a utility must build that are used only for brief periods—an inefficient use of capital. The higher the utility’s risk profile rises given the uncertainties surrounding the time needed for permitting, building, and recouping costs. The higher the costs for utilities to purchase supply, because generators can charge more for contracts and spot supply during high-demand periods. Smart Grids enable a variety of programs that reduce peak demand, including: Time-of-use pricing and critical peak pricing—programs that charge customers more when they consume electricity during peak periods. Pilot projects indicate that these programs are successful in flattening peaks, thus ensuring better use of existing T&D and generation assets. Direct load control, which lets utilities reduce or eliminate electricity flow to customer equipment (such as air conditioners). Contracts govern the terms and conditions of these turn-offs. Indirect load control, which signals customers to reduce the use of on-premises equipment for contractually agreed-on time periods. Smart Grid business software enables utilities to impose penalties on customers who do not comply with their contracts. Smart Grids also help utilities manage peaks with existing assets by enabling: Real-time asset monitoring and control. In this application, advanced sensors safely enable dynamic capacity load limits, ensuring that all grid assets can be used to their maximum capacity during peak demand periods. Real-time asset monitoring and control applications also detect the location of excessive losses and pinpoint need for mitigation and asset replacements. As a result, utilities reduce outage risk and guard against excess capacity or “over-build”. Better peak demand analysis. As a result: Distribution planners can better size equipment (e.g. transformers) to avoid over-building. Operations engineers can identify and resolve bottlenecks and other inefficiencies that may cause or exacerbate peaks. As above, the result is a reduction in the tendency to over-build. Supply managers can more closely match procurement with delivery. As a result, they can fine-tune supply portfolios, reducing the tendency to over-contract for peak supply and reducing the need to resort to spot market purchases during high peaks. Smart Grids can help lower the cost of remaining peaks by: Standardizing interconnections for new distributed resources (such as electricity storage devices). Placing the interconnections where needed to support anticipated grid congestion. Smart Grid Business Software Lowers the Cost of Field Services By processing Smart Grid data through their business software, utilities can reduce such field costs as: Vegetation management. Smart Grids can pinpoint momentary interruptions and tree-caused outages. Spatial mash-up tools leverage GIS models of tree growth for targeted vegetation management. This reduces the cost of unnecessary tree trimming. Service vehicle fuel. Many utility service calls are “false alarms.” Checking meter status before dispatching crews prevents many unnecessary “truck rolls.” Similarly, crews use far less fuel when Smart Grid sensors can pinpoint a problem and mobile workforce applications can then route them directly to it. Smart Grid Business Software Ensures Regulatory Compliance Smart Grids can ensure compliance with private contracts and with regional, national, or international requirements by: Monitoring fulfillment of contract terms. Utilities can use one-hour interval meters to ensure that interruptible (“non-core”) customers actually reduce or eliminate deliveries as required. They can use the information to levy fines against contract violators. Monitoring regulations imposed on customers, such as maximum use during specific time periods. Using accurate time-stamped event history derived from intelligent devices distributed throughout the smart grid to monitor and report reliability statistics and risk compliance. Automating business processes and activities that ensure compliance with security and reliability measures (e.g. NERC-CIP 2-9). Grid Business Software Strengthens Utilities’ Connection to Customers While Reducing Customer Service Costs During outages, Smart Grid business software can: Identify outages more quickly. Software uses sensors to pinpoint outages and nested outage locations. They also permit utilities to ensure outage resolution at every meter location. Size outages more accurately, permitting utilities to dispatch crews that have the skills needed, in appropriate numbers. Provide updates on outage location and expected duration. This information helps call centers inform customers about the timing of service restoration. Smart Grids also facilitates display of outage maps for customer and public-service use. Smart Grids can significantly reduce the cost to: Connect and disconnect customers. Meters capable of remote disconnect can virtually eliminate the costs of field crews and vehicles previously required to change service from the old to the new residents of a metered property or disconnect customers for nonpayment. Resolve reports of voltage fluctuation. Smart Grids gather and report voltage and power quality data from meters and grid sensors, enabling utilities to pinpoint reported problems or resolve them before customers complain. Detect and resolve non-technical losses (e.g. theft). Smart Grids can identify illegal attempts to reconnect meters or to use electricity in supposedly vacant premises. They can also detect theft by comparing flows through delivery assets with billed consumption. Smart Grids also facilitate outreach to customers. By monitoring and analyzing consumption over time, utilities can: Identify customers with unusually high usage and contact them before they receive a bill. They can also suggest conservation techniques that might help to limit consumption. This can head off “high bill” complaints to the contact center. Note that such “high usage” or “additional charges apply because you are out of range” notices—frequently via text messaging—are already common among mobile phone providers. Help customers identify appropriate bill payment alternatives (budget billing, prepayment, etc.). Help customers find and reduce causes of over-consumption. There’s no waiting for bills in the mail before they even understand there is a problem. Utilities benefit not just through improved customer relations but also through limiting the size of bills from customers who might struggle to pay them. Where permitted, Smart Grids can open the doors to such new utility service offerings as: Monitoring properties. Landlords reduce costs of vacant properties when utilities notify them of unexpected energy or water consumption. Utilities can perform similar services for owners of vacation properties or the adult children of aging parents. Monitoring equipment. Power-use patterns can reveal a need for equipment maintenance. Smart Grids permit utilities to alert owners or managers to a need for maintenance or replacement. Facilitating home and small-business networks. Smart Grids can provide a gateway to equipment networks that automate control or let owners access equipment remotely. They also facilitate net metering, offering some utilities a path toward involvement in small-scale solar or wind generation. Prepayment plans that do not need special meters. Smart Grid Business Software Helps Customers Control Energy Costs There is no end to the ways Smart Grids help both small and large customers control energy costs. For instance: Multi-premises customers appreciate having all meters read on the same day so that they can more easily compare consumption at various sites. Customers in competitive regions can match their consumption profile (detailed via Smart Grid data) with specific offerings from competitive suppliers. Customers seeing inexplicable consumption patterns and power quality problems may investigate further. The result can be discovery of electrical problems that can be resolved through rewiring or maintenance—before more serious fires or accidents happen. Smart Grid Business Software Facilitates Use of Renewables Generation from wind and solar resources is a popular alternative to fossil fuel generation, which emits greenhouse gases. Wind and solar generation may also increase energy security in regions that currently import fossil fuel for use in generation. Utilities face many technical issues as they attempt to integrate intermittent resource generation into traditional grids, which traditionally handle only fully dispatchable generation. Smart Grid business software helps solves many of these issues by: Detecting sudden drops in production from renewables-generated electricity (wind and solar) and automatically triggering electricity storage and smart appliance response to compensate as needed. Supporting industry-standard distributed generation interconnection processes to reduce interconnection costs and avoid adding renewable supplies to locations already subject to grid congestion. Facilitating modeling and monitoring of locally generated supply from renewables and thus helping to maximize their use. Increasing the efficiency of “net metering” (through which utilities can use electricity generated by customers) by: Providing data for analysis. Integrating the production and consumption aspects of customer accounts. During non-peak periods, such techniques enable utilities to increase the percent of renewable generation in their supply mix. During peak periods, Smart Grid business software controls circuit reconfiguration to maximize available capacity. Conclusion Utility missions are changing. Yesterday, they focused on delivery of reasonably priced energy and water. Tomorrow, their missions will expand to encompass sustainable use and environmental improvement.Smart Grids are key to helping utilities achieve this expanded mission. But they come at a relatively high price. Utilities will need to invest heavily in new hardware, software, business process development, and staff training. Customer investments in home area networks and smart appliances will be large. Learning to change the energy and water consumption habits of a lifetime could ultimately prove even more formidable tasks.Smart Grid business software can ease the cost and difficulties inherent in a needed transition to a more flexible, reliable, responsive electricity grid. Justifying its implementation, however, requires a full understanding of the benefits it brings—benefits that can ultimately help customers, utilities, communities, and the world address global issues like energy security and climate change while minimizing costs and maximizing customer convenience. This white paper is available for download here. For further information about Oracle's Primavera Solutions for Utilities, please read our Utilities e-book.

    Read the article

  • CodePlex Daily Summary for Sunday, April 08, 2012

    CodePlex Daily Summary for Sunday, April 08, 2012Popular ReleasesExtAspNet: ExtAspNet v3.1.3: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ??????????。 ExtAspNet ??????? JavaScript,?? CSS,?? UpdatePanel,?? ViewState,?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????:Apache License 2.0 (Apache) ??:http://extasp.net/ ??:http://bbs.extasp.net/ ??:http://extaspnet.codeplex.com/ ??:http://sanshi.cnblogs.com/ ????: +2012-04-08 v3.1.3 -??Language="zh_TW"?JS???BUG(??)。 +?D...Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.5.5: New Controls ChatBubble ChatBubbleTextBox OpacityToggleButton New Stuff TimeSpan languages added: RU, SK, CS Expose the physics math from TimeSpanPicker Image Stretch now on buttons Bug Fixes Layout fix so RoundToggleButton and RoundButton are exactly the same Fix for ColorPicker when set via code behind ToastPrompt bug fix with OnNavigatedTo Toast now adjusts its layout if the SIP is up Fixed some issues with Expression Blend supportHarness - Internet Explorer Automation: Harness 2.0.3: support the operation fo frameset, frame and iframe Add commands SwitchFrame GetUrl GoBack GoForward Refresh SetTimeout GetTimeout Rename commands GetActiveWindow to GetActiveBrowser SetActiveWindow to SetActiveBrowser FindWindowAll to FindBrowser NewWindow to NewBrowser GetMajorVersion to GetVersionBetter Explorer: Better Explorer 2.0.0.861 Alpha: - fixed new folder button operation not work well in some situations - removed some unnecessary code like subclassing that is not needed anymore - Added option to make Better Exlorer default (at least for WIN+E operations) - Added option to enable file operation replacements (like Terracopy) to work with Better Explorer - Added some basic usability to "Share" button - Other fixesText Designer Outline Text: Version 2 Preview 2: Added Fake 3D demos for C++ MFC, C# Winform and C# WPFLightFarsiDictionary - ??????? ??? ?????/???????: LightFarsiDictionary - v1: LightFarsiDictionary - v1WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.3: Version: 2.5.0.3 (Milestone 3): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete [O] WAF: Mark the StringBuilderExtensions class as obsolete because the AppendInNewLine method can be replaced with string.Jo...GeoMedia PostGIS data server: PostGIS GDO 1.0.1.2: This is a new version of GeoMeda PostGIS data server which supports user rights. It means that only those feature classes, which the current user has rights to select, are visible in GeoMedia. Issues fixed in this release Fixed problem with renaming and deleting feature classes - IMPORTANT! - the gfeatures view must be recreated so that this issue is completely fixed. The attached script "GFeaturesView2.sql" can be used to accomplish this task. Another way is to drop and recreate the metadat...SkyDrive Connector for SharePoint: SkyDrive Connector for SharePoint: Fixed a few bugs pertaining to live authentication Removed dependency on Shared Documents Removed CallBack web part propertyClosedXML - The easy way to OpenXML: ClosedXML 0.65.2: Aside from many bug fixes we now have Conditional Formatting The conditional formatting was sponsored by http://www.bewing.nl (big thanks) New on v0.65.1 Fixed issue when loading conditional formatting with default values for icon sets New on v0.65.2 Fixed issue loading conditional formatting Improved inserts performanceLiberty: v3.2.0.0 Release 4th April 2012: Change Log-Added -Halo 3 support (invincibility, ammo editing) -Halo 3: ODST support (invincibility, ammo editing) -The file transfer page now shows its progress in the Windows 7 taskbar -"About this build" settings page -Reach Change what an object is carrying -Reach Change which node a carried object is attached to -Reach Object node viewer and exporter -Reach Change which weapons you are carrying from the object editor -Reach Edit the weapon controller of vehicles and turrets -An error dia...MSBuild Extension Pack: April 2012: Release Blog Post The MSBuild Extension Pack April 2012 release provides a collection of over 435 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUID’...DotNetNuke® Community Edition CMS: 06.01.05: Major Highlights Fixed issue that stopped users from creating vocabularies when the portal ID was not zero Fixed issue that caused modules configured to be displayed on all pages to be added to the wrong container in new pages Fixed page quota restriction issue in the Ribbon Bar Removed restriction that would not allow users to use a dash in page names. Now users can create pages with names like "site-map" Fixed issue that was causing the wrong container to be loaded in modules wh...51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.3.1: One Click Install from NuGet Changes to Version 2.1.3.11. [assembly: AllowPartiallyTrustedCallers] has been added back into the AssemblyInfo.cs file to prevent failures with other assemblies in Medium trust environments. 2. The Lite data embedded into the assembly has been updated to include devices from December 2011. The 42 new RingMark properties will return Unknown if RingMark data is not available. Changes to Version 2.1.2.11Code Changes 1. The project is now licenced under the Mozilla...MVC Controls Toolkit: Mvc Controls Toolkit 2.0.0: Added Support for Mvc4 beta and WebApi The SafeqQuery and HttpSafeQuery IQueryable implementations that works as wrappers aroung any IQueryable to protect it from unwished queries. "Client Side" pager specialized in paging javascript data coming either from a remote data source, or from local data. LinQ like fluent javascript api to build queries either against remote data sources, or against local javascript data, with exactly the same interface. There are 3 different query objects exp...nopCommerce. Open source shopping cart (ASP.NET MVC): nopcommerce 2.50: Highlight features & improvements: • Significant performance optimization. • Allow store owners to create several shipments per order. Added a new shipping status: “Partially shipped”. • Pre-order support added. Enables your customers to place a Pre-Order and pay for the item in advance. Displays “Pre-order” button instead of “Buy Now” on the appropriate pages. Makes it possible for customer to buy available goods and Pre-Order items during one session. It can be managed on a product variant ...WiX Toolset: WiX v3.6 RC0: WiX v3.6 RC0 (3.6.2803.0) provides support for VS11 and a more stable Burn engine. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/4/3/WiX-v3.6-Release-Candidate-Zero-availableSageFrame: SageFrame 2.0: Sageframe is an open source ASP.NET web development framework developed using ASP.NET 3.5 with service pack 1 (sp1) technology. It is designed specifically to help developers build dynamic website by providing core functionality common to most web applications.iTuner - The iTunes Companion: iTuner 1.5.4475: Fix to parse empty playlists in iTunes LibraryDocument.Editor: 2012.2: Whats New for Document.Editor 2012.2: New Save Copy support New Page Setup support Minor Bug Fix's, improvements and speed upsNew ProjectsCameraSudokuSolver: Sudoku solver through camera for AndroidCardboardBox: This is a WPF based client application for the danbooru.donmai.us image board.Cloud in Net: Cloud in NetDataStoreCleaner: DataStoreCleaner clears "DataStore" folder which manages Windows Update History. It is useful for fixing WU error, or tune up Windows start-up. It's developed in C#.E-Ticaret - Sanal Magaza: Temel olarak gelismis e-ticaret sistemlerinin temel özelliklerini bulundurucak ve yönetecek bir sistem olacaktir. Sonrasinda ek gelistirmeler için özel çalismalar yapilacaktir.Finding all factors: this is a simple Winform application for finding all factors or divisors of a given number. i think is a simple example for learning how to work with essential backgroundWorker class .FlashGraphicBuilder: Simple graphic builder on AS3IpPbxImportRR: Command-line tool to import or export routing records to/from a SwyxWare VoIP PBX. This is a sample application showing how to use the SwyxWare Configuration API (CDS API). Use it at your own risk.KNX.net: KNX.net provides a KNX API for C#LevelDesigner: LevelDesignerN2F Yverdon Sanitizers: A system to help ease the pain of sanitizing data. The system comes with some basic sanitizers as well as the framework necessary to enable easy development of custom sanitizers.nAPI for Windows Phone: Windows Phone library for using Naver(R)'s open API service. (This project is 3rd party library project, NOT a NHN/Naver's official project) For more info about Naver Open API: http://dev.naver.com/openapi/NJena (Semantic Web Framework for .NET): A .NET source-level port of the Jena frameworkNWTCompiler: NWTCompiler is for those interested in creating their own compiled database of the New World Translation of the Holy Scriptures from the watchtower.org sources. Formats such as e-Sword are supported.Odin Game Engine: Odin is an attempt at mixing Windows Forms and XNA in the goal of making a game engine.qq: qqRanmal MVC Work: It is my Knowledge Exchange projectRichCode: RichCode is a UserControl that is easy to use, allows the custom syntax highlighting without much effortRUPSY Download manager: RUPSY Download managerSDCBCWEB: This is a web application for a class project. The goal is to create a content management system to be used for educational purposes by a nonprofit.Snake Game: Kursinis darbasSpec Pattern: Spec Pattern is a simple yet powerful implementation of specification pattern in C#. Relying in IQueryable it covers the three requirements this patterns aims to solve - Validation - Querying - BuildingSteel Brain: An open source project which aims to implement a neural net framework in unmanaged C++. The longer term describes why I chose C++ over the phenomenal C# which is creating a neural net that can harness the power of GPGPU's by using the OpenCL library. (I'm not a beleiver of projects that tries to provide solutions to developers who dont want to come out of the managed, cozy C# context) Sunday: Another Web Content Management System.TO7 License Plate Recognition: This project is part of a college assignment.ts: tsUnofficial RunUO: This project is a fork of the popular Ultima Online emulation software RunUO ( http://www.runuo.com ) The main difference between this repository and the official RunUO is that this project is fully set up and ready to launch in Visual Studio 2010, with full .NET 4.0 support!VibroStudio: Application for edit, view and process vibrosignalsWindows Phone AR.Drone controller: The Windows Phone AR.Drone controller is a controller library and client application for Windows Phone 7.1. It is written in C#.XamlImageConverter: A tool to convert Xaml to images. - It implements an MSBuild task that can be imported in any project to convert xaml to images in a project - It implements a HttpHandler that converts xaml to images on the fly. XEFFEX: XEFFEX is a play off the piano gadget. The shapes were manipulated and the sounds are set to different effects. The end goal was too have the pads play a sound and execute a program the user can pre-choose. The options menu allows quit access to your files. XiaMiRingtone: ?????windows phone??。 ???????,????????,???????????。

    Read the article

  • DevConnections Session Slides, Samples and Links

    - by Rick Strahl
    Finally coming up for air this week, after catching up with being on the road for the better part of three weeks. Here are my slides, samples and links for my four DevConnections Session two weeks ago in Vegas. I ended up doing one extra un-prepared for session on WebAPI and AJAX, as some of the speakers were either delayed or unable to make it at all to Vegas due to Sandy's mayhem. It was pretty hectic in the speaker room as Erik (our event coordinator extrodinaire) was scrambling to fill session slots with speakers :-). Surprisingly it didn't feel like the storm affected attendance drastically though, but I guess it's hard to tell without actual numbers. The conference was a lot of fun - it's been a while since I've been speaking at one of these larger conferences. I'd been taking a hiatus, and I forgot how much I enjoy actually giving talks. Preparing - well not  quite so much, especially since I ended up essentially preparing or completely rewriting for all three of these talks and I was stressing out a bit as I was sick the week before the conference and didn't get as much time to prepare as I wanted to. But - as always seems to be the case - it all worked out, but I guess those that attended have to be the judge of that… It was great to catch up with my speaker friends as well - man I feel out of touch. I got to spend a bunch of time with Dan Wahlin, Ward Bell, Julie Lerman and for about 10 minutes even got to catch up with the ever so busy Michele Bustamante. Lots of great technical discussions including a fun and heated REST controversy with Ward and Howard Dierking. There were also a number of great discussions with attendees, describing how they're using the technologies touched in my talks in live applications. I got some great ideas from some of these and I wish there would have been more opportunities for these kinds of discussions. One thing I miss at these Vegas events though is some sort of coherent event where attendees and speakers get to mingle. These Vegas conferences are just like "go to sessions, then go out and PARTY on the town" - it's Vegas after all! But I think that it's always nice to have at least one evening event where everybody gets to hang out together and trade stories and geek talk. Overall there didn't seem to be much opportunity for that beyond lunch or the small and short exhibit hall events which it seemed not many people actually went to. Anyways, a good time was had. I hope those of you that came to my sessions learned something useful. There were lots of great questions and discussions after the sessions - always appreciate hearing the real life scenarios that people deal with in relation to the abstracted scenarios in sessions. Here are the Session abstracts, a few comments and the links for downloading slides and  samples. It's not quite like being there, but I hope this stuff turns out to be useful to some of you. I'll be following up a couple of these sessions with white papers in the following weeks. Enjoy. ASP.NET Architecture: How ASP.NET Works at the Low Level Abstract:Interested in how ASP.NET works at a low level? ASP.NET is extremely powerful and flexible technology, but it's easy to forget about the core framework that underlies the higher level technologies like ASP.NET MVC, WebForms, WebPages, Web Services that we deal with on a day to day basis. The ASP.NET core drives all the higher level handlers and frameworks layered on top of it and with the core power comes some complexity in the form of a very rich object model that controls the flow of a request through the ASP.NET pipeline from Windows HTTP services down to the application level. To take full advantage of it, it helps to understand the underlying architecture and model. This session discusses the architecture of ASP.NET along with a number of useful tidbits that you can use for building and debugging your ASP.NET applications more efficiently. We look at overall architecture, how requests flow from the IIS (7 and later) Web Server to the ASP.NET runtime into HTTP handlers, modules and filters and finally into high-level handlers like MVC, Web Forms or Web API. Focus of this session is on the low-level aspects on the ASP.NET runtime, with examples that demonstrate the bootstrapping of ASP.NET, threading models, how Application Domains are used, startup bootstrapping, how configuration files are applied and how all of this relates to the applications you write either using low-level tools like HTTP handlers and modules or high-level pages or services sitting at the top of the ASP.NET runtime processing chain. Comments:I was surprised to see so many people show up for this session - especially since it was the last session on the last day and a short 1 hour session to boot. The room was packed and it was to see so many people interested the abstracts of architecture of ASP.NET beyond the immediate high level application needs. Lots of great questions in this talk as well - I only wish this session would have been the full hour 15 minutes as we just a little short of getting through the main material (didn't make it to Filters and Error handling). I haven't done this session in a long time and I had to pretty much re-figure all the system internals having to do with the ASP.NET bootstrapping in light for the changes that came with IIS 7 and later. The last time I did this talk was with IIS6, I guess it's been a while. I love doing this session, mainly because in my mind the core of ASP.NET overall is so cleanly designed to provide maximum flexibility without compromising performance that has clearly stood the test of time in the 10 years or so that .NET has been around. While there are a lot of moving parts, the technology is easy to manage once you understand the core components and the core model hasn't changed much even while the underlying architecture that drives has been almost completely revamped especially with the introduction of IIS 7 and later. Download Samples and Slides   Introduction to using jQuery with ASP.NET Abstract:In this session you'll learn how to take advantage of jQuery in your ASP.NET applications. Starting with an overview of jQuery client features via many short and fun examples, you'll find out about core features like the power of selectors for document element selection, manipulating these elements with jQuery's wrapped set methods in a browser independent way, how to hook up and handle events easily and generally apply concepts of unobtrusive JavaScript principles to client scripting. The second half of the session then delves into jQuery's AJAX features and several different ways how you can interact with ASP.NET on the server. You'll see examples of using ASP.NET MVC for serving HTML and JSON AJAX content, as well as using the new ASP.NET Web API to serve JSON and hypermedia content. You'll also see examples of client side templating/databinding with Handlebars and Knockout. Comments:This session was in a monster of a room and to my surprise it was nearly packed, given that this was a 100 level session. I can see that it's a good idea to continue to do intro sessions to jQuery as there appeared to be quite a number of folks who had not worked much with jQuery yet and who most likely could greatly benefit from using it. Seemed seemed to me the session got more than a few people excited to going if they hadn't yet :-).  Anyway I just love doing this session because it's mostly live coding and highly interactive - not many sessions that I can build things up from scratch and iterate on in an hour. jQuery makes that easy though. Resources: Slides and Code Samples Introduction to jQuery White Paper Introduction to ASP.NET Web API   Hosting the Razor Scripting Engine in Your Own Applications Abstract:The Razor Engine used in ASP.NET MVC and ASP.NET Web Pages is a free-standing scripting engine that can be disassociated from these Web-specific implementations and can be used in your own applications. Razor allows for a powerful mix of code and text rendering that makes it a wonderful tool for any sort of text generation, from creating HTML output in non-Web applications, to rendering mail merge-like functionality, to code generation for developer tools and even as a plug-in scripting engine. In this session, we'll look at the components that make up the Razor engine and how you can bootstrap it in your own applications to hook up templating. You'll find out how to create custom templates and manage Razor requests that can be pre-compiled, detecting page changes and act in ways similar to a full runtime. We look at ways that you can pass data into the engine and retrieve both the rendered output as well as result values in a package that makes it easy to plug Razor into your own applications. Comments:That this session was picked was a bit of a surprise to me, since it's a bit of a niche topic. Even more of a surprise was that during the session quite a few people who attended had actually used Razor externally and were there to find out more about how the process works and how to extend it. In the session I talk a bit about a custom Razor hosting implementation (Westwind.RazorHosting) and drilled into the various components required to build a custom Razor Hosting engine and a runtime around it. This sessions was a bit of a chore to prepare for as there are lots of technical implementation details that needed to be dealt with and squeezing that into an hour 15 is a bit tight (and that aren't addressed even by some of the wrapper libraries that exist). Found out though that there's quite a bit of interest in using a templating engine outside of web applications, or often side by side with the HTML output generated by frameworks like MVC or WebForms. An extra fun part of this session was that this was my first session and when I went to set up I realized I forgot my mini-DVI to VGA adapter cable to plug into the projector in my room - 6 minutes before the session was about to start. So I ended up sprinting the half a mile + back to my room - and back at a full sprint. I managed to be back only a couple of minutes late, but when I started I was out of breath for the first 10 minutes or so, while trying to talk. Musta sounded a bit funny as I was trying to not gasp too much :-) Resources: Slides and Code Samples Westwind.RazorHosting GitHub Project Original RazorHosting Blog Post   Introduction to ASP.NET Web API for AJAX Applications Abstract:WebAPI provides a new framework for creating REST based APIs, but it can also act as a backend to typical AJAX operations. This session covers the core features of Web API as it relates to typical AJAX application development. We’ll cover content-negotiation, routing and a variety of output generation options as well as managing data updates from the client in the context of a small Single Page Application style Web app. Finally we’ll look at some of the extensibility features in WebAPI to customize and extend Web API in a number and useful useful ways. Comments:This session was a fill in for session slots not filled due MIA speakers stranded by Sandy. I had samples from my previous Web API article so decided to go ahead and put together a session from it. Given that I spent only a couple of hours preparing and putting slides together I was glad it turned out as it did - kind of just ran itself by way of the examples I guess as well as nice audience interactions and questions. Lots of interest - and also some confusion about when Web API makes sense. Both this session and the jQuery session ended up getting a ton of questions about when to use Web API vs. MVC, whether it would make sense to switch to Web API for all AJAX backend work etc. In my opinion there's no need to jump to Web API for existing applications that already have a good AJAX foundation. Web API is awesome for real externally consumed APIs and clearly defined application AJAX APIs. For typical application level AJAX calls, it's still a good idea, but ASP.NET MVC can serve most if not all of that functionality just as well. There's no need to abandon MVC (or even ASP.NET AJAX or third party AJAX backends) just to move to Web API. For new projects Web API probably makes good sense for isolation of AJAX calls, but it really depends on how the application is set up. In some cases sharing business logic between the HTML and AJAX interfaces with a single MVC API can be cleaner than creating two completely separate code paths to serve essentially the same business logic. Resources: Slides and Code Samples Sample Code on GitHub Introduction to ASP.NET Web API White Paper© Rick Strahl, West Wind Technologies, 2005-2012Posted in Conferences  ASP.NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Handling HumanTask attachments in Oracle BPM 11g PS4FP+ (II)

    - by ccasares
    Retrieving uploaded attachments -UCM- As stated in my previous blog entry, Oracle BPM 11g 11.1.1.5.1 (aka PS4FP) introduced a new cool feature whereby you can use Oracle WebCenter Content (previously known as Oracle UCM) as the repository for the human task attached documents. For more information about how to use or enable this feature, have a look here. The attachment scope (either TASK or PROCESS) also applies to UCM-attachments. But even with this other feature, one question might arise when using UCM attachments. How can I get them from within the process? The first answer would be to use the same getTaskAttachmentContents() XPath function already explained in my previous blog entry. In fact, that's the way it should be. But in Oracle BPM 11g 11.1.1.5.1 (PS4FP) and 11.1.1.6.0 (PS5) there's a bug that prevents you to do that. If you invoke such function against a UCM-attachment, you'll get a null content response (bug#13907552). Even if the attachment was correctly uploaded. While this bug gets fixed, next I will show a workaround that lets me to retrieve the UCM-attached documents from within a BPM process. Besides, the sample will show how to interact with WCC API from within a BPM process.Aside note: I suggest you to read my previous blog entry about Human Task attachments where I briefly describe some concepts that are used next, such as the execData/attachment[] structure. Sample Process I will be using the following sample process: A dummy UserTask using "HumanTask2" Human Task, followed by an Embedded Subprocess that will retrieve the attachments payload. In this case, and here's the key point of the sample, we will retrieve such payload using WebCenter Content WebService API (IDC): and once retrieved, we will write each of them back to a file in the server using a File Adapter service: In detail:  We will use the same attachmentCollection XSD structure and same BusinessObject definition as in the previous blog entry. However we create a separate variable, named attachmentUCM, based on such BusinessObject. We will still need to keep a copy of the HumanTask output's execData structure. Therefore we need to create a new variable of type TaskExecutionData (different one than the other used for non-UCM attachments): As in the non-UCM attachments flow, in the output tab of the UserTask mapping, we'll keep a copy of the execData structure: Now we get into the embedded subprocess that will retrieve the attachments' payload. First, and using an XSLT transformation, we feed the attachmentUCM variable with the following information: The name of each attachment (from execData/attachment/name element) The WebCenter Content ID of the uploaded attachment. This info is stored in execData/attachment/URI element with the format ecm://<id>. As we just want the numeric <id>, we need to get rid of the protocol prefix ("ecm://"). We do so with some XPath functions as detailed below: with these two functions being invoked, respectively: We, again, set the target payload element with an empty string, to get the <payload></payload> tag created. The complete XSLT transformation is shown below. Remember that we're using the XSLT for-each node to create as many target structures as necessary.  Once we have fed the attachmentsUCM structure and so it now contains the name of each of the attachments along with each WCC unique id (dID), it is time to iterate through it and get the payload. Therefore we will use a new embedded subprocess of type MultiInstance, that will iterate over the attachmentsUCM/attachment[] element: In each iteration we will use a Service activity that invokes WCC API through a WebService. Follow these steps to create and configure the Partner Link needed: Login to WCC console with an administrator user (i.e. weblogic). Go to Administration menu and click on "Soap Wsdls" link. We will use the GetFile service to retrieve a file based on its dID. Thus we'll need such service WSDL definition that can be downloaded by clicking the GetFile link. Save the WSDL file in your JDev project folder. In the BPM project's composite view, drag & drop a WebService adapter to create a new External Reference, based on the just added GetFile.wsdl. Name it UCM_GetFile. WCC services are secured through basic HTTP authentication. Therefore we need to enable the just created reference for that: Right-click the reference and click on Configure WS Policies. Under the Security section, click "+" to add the "oracle/wss_username_token_client_policy" policy The last step is to set the credentials for the security policy. For the sample we will use the admin user for WCC (weblogic/welcome1). Open the composite.xml file and select the Source view. Search for the UCM_GetFile entry and add the following highlighted elements into it:   <reference name="UCM_GetFile" ui:wsdlLocation="GetFile.wsdl">     <interface.wsdl interface="http://www.stellent.com/GetFile/#wsdl.interface(GetFileSoap)"/>     <binding.ws port="http://www.stellent.com/GetFile/#wsdl.endpoint(GetFile/GetFileSoap)"                 location="GetFile.wsdl" soapVersion="1.1">       <wsp:PolicyReference URI="oracle/wss_username_token_client_policy"                            orawsp:category="security" orawsp:status="enabled"/>       <property name="weblogic.wsee.wsat.transaction.flowOption"                 type="xs:string" many="false">WSDLDriven</property>       <property name="oracle.webservices.auth.username"                 type="xs:string">weblogic</property>       <property name="oracle.webservices.auth.password"                 type="xs:string">welcome1</property>     </binding.ws>   </reference> Now the new external reference is ready: Once the reference has just been created, we should be able now to use it from our BPM process. However we find here a problem. The WCC GetFile service operation that we will use, GetFileByID, accepts as input a structure similar to this one, where all element tags are optional: <get:GetFileByID xmlns:get="http://www.stellent.com/GetFile/">    <get:dID>?</get:dID>   <get:rendition>?</get:rendition>   <get:extraProps>      <get:property>         <get:name>?</get:name>         <get:value>?</get:value>      </get:property>   </get:extraProps></get:GetFileByID> and we need to fill up just the <get:dID> tag element. Due to some kind of restriction or bug on WCC, the rest of the tag elements must NOT be sent, not even empty (i.e.: <get:rendition></get:rendition> or <get:rendition/>). A sample request that performs the query just by the dID, must be in the following format: <get:GetFileByID xmlns:get="http://www.stellent.com/GetFile/">   <get:dID>12345</get:dID></get:GetFileByID> The issue here is that the simple mapping in BPM does create empty tags being a sample result as follows: <get:GetFileByID xmlns:get="http://www.stellent.com/GetFile/"> <get:dID>12345</get:dID> <get:rendition/> <get:extraProps/> </get:GetFileByID> Although the above structure is perfectly valid, it is not accepted by WCC. Therefore, we need to bypass the problem. The workaround we use (many others are available) is to add a Mediator component between the BPM process and the Service that simply copies the input structure from BPM but getting rid of the empty tags. Follow these steps to configure the Mediator: Drag & drop a new Mediator component into the composite. Uncheck the creation of the SOAP bindings and use the Interface Definition from WSDL template and select the existing GetFile.wsdl Double click in the mediator to edit it. Add a static routing rule to the GetFileByID operation, of type Service and select References/UCM_GetFile/GetFileByID target service: Create the request and reply XSLT mappers: Make sure you map only the dID element in the request: And do an Auto-mapper for the whole response: Finally, we can now add and configure the Service activity in the BPM process. Drag & drop it to the embedded subprocess and select the NormalizedGetFile service and getFileByID operation: Map both the input: ...and the output: Once this embedded subprocess ends, we will have all attachments (name + payload) in the attachmentsUCM variable, which is the main goal of this sample. But in order to test everything runs fine, we finish the sample writing each attachment to a file. To that end we include a final embedded subprocess to concurrently iterate through each attachmentsUCM/attachment[] element: On each iteration we will use a Service activity that invokes a File Adapter write service. In here we have two important parameters to set. First, the payload itself. The file adapter awaits binary data in base64 format (string). We have to map it using XPath (Simple mapping doesn't recognize a String as a base64-binary valid target): Second, we must set the target filename using the Service Properties dialog box: Again, note how we're making use of the loopCounter index variable to get the right element within the embedded subprocess iteration. Final blog entry about attachments will handle how to inject documents to Human Tasks from the BPM process and how to share attachments between different User Tasks. Will come soon. Again, once I finish will all posts on this matter, I will upload the whole sample project to java.net.

    Read the article

< Previous Page | 488 489 490 491 492 493 494 495 496 497 498 499  | Next Page >