Search Results

Search found 18914 results on 757 pages for 'turing machine'.

Page 492/757 | < Previous Page | 488 489 490 491 492 493 494 495 496 497 498 499  | Next Page >

  • Network: Incoming connections work, outgoing fails

    - by anirvan
    i recently set up my own server at home to run Ubuntu 12.04 server ed. on booting up, i noticed that a message related to networking comes up, and the booting process pauses. the message read something like - waiting for network configuration and after a while - waiting another 60 seconds... on booting up, I realised that any command which requires a network connection was not working - ping, apt-get install, etc. on firing the ifup eth0 command, I get the error RTNETLINK answers: File exists. Failed to bring up eth0. I also realised, while searching the web for this problem, that this is probably one of the most common networking related issues - however, most of the questions are around setting up multiple IPs for the same machine. ifdown eth0 also fails, stating that eth0 is not configured. my /etc/network/interfaces file has a simple configuration for a static IP: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address xx.xx.xx.xx netmask xx.xx.xx.xx broadcast xx.xx.xx.xx gateway xx.xx.xx.xx dns-nameservers xx.xx.xx.xx The strangest part of this problem is that, while I can't connect to anything outside, I can ping to this particular server using the static IP configured in the interface file, and, i can even SSH into it! I'm really at ends here with this problem, and any guidance is much appreciated. Thanks!

    Read the article

  • Windows 7 just restarts, no BSOD, shows "Event ID 14 volsnap"

    - by Mdc007
    My Windows 7 just restarts without giving me a BSOD. When it reboots, it will hang sometimes and you have to let it rest. Sometimes it will print a message saying that Hal.dll is missing or corrupt. When it does restart I can't run a backup or a clone drive – it comes up with constant errors. I tried to run chkdsk – it says everything's clean. What is really puzzling is SyncToy on a different drive hangs half way through and won't run either. Machine: OCZ SSD Agility 2 for C drive SATA HDD for programs, documents on D drive MSI AMD 880 chipset Event viewer says something about critical power failure I/O operations and "Event ID 14 volsnap" – but that is just telling me the computer powered off which I already know.

    Read the article

  • Nagios: Which services should I monitor on different roles of servers?

    - by Itai Ganot
    I've started working in a new workplace and my first task is to build a Nagios server and configure it to monitor the servers in the network. Since I'm starting from scratch I wanted to hear from you, experienced users, which checks should I configure for each role? For example, there are some basic checks which I run on each Linux machine I monitor: SSH, Ping, Load, Current Users, Swap Usage, etc... Now my question is, which specific checks should I run for a DataBase server, for a Networking Switch, for Httpd servers? (I currently monitor how many httpd processes are running) Thanks in advance

    Read the article

  • Dovecot, POP3 and Gmail

    - by Eric J.
    I setup Postfix and Dovecot on a new Ubuntu box following these directions. From a client machine, I validate that POP3 seems to be working telnet mydomain.com 110 +OK Dovecot ready. USER [email protected] +OK PASS mypassword +OK Logged in. quit +OK Logging out. However, when trying to configure Gmail on the same client to retrieve email via POP3, I get the error Server denied POP3 access for the given username and password. Server returned error: "Login failed." I carefully confirmed that Gmail is configured to use the same POP Server, Port, Username and Password I used when checking the connection with telnet. What could be causing Gmail to get a "Login failed" message?

    Read the article

  • show php error message on IIS 7

    - by Max
    I am using IIS as a webserver on my development machine for PHP webdevelopment. Or at least, I am trying to. When there is a syntax error in a PHP script and I open that file in my webbrowser, I just get an 503 "internal server error" and the default IIS error page for this error. Some browsers dont open that file at all, possibly because of the 503 HTTP Response Header. I would like IIS to act in that case just like the apache webserver: display the PHP file with the error anyway, so that the error message gets printed out. How can this be done? EDIT: PHP settings: display_errors is on and error_reporting is set to E_ALL

    Read the article

  • Recently disinfected laptop still has strange issues

    - by Robsta
    This computer was heavily infected with viruses recently. The hard drive had to be taken out and cleaned by a different machine. The hard drive is now virus free, but Windows still has some strange issues that I need some help fixing. I've re-installed Chrome, but I still have issues with it. It's the same for Firefox and any other browser. When I plug in a USB flash drive, everything is fine, except when it asks me what to do with it I get what you see in the third image. I believe this is Windows 7. Any ideas? Here are the images of some of the issues:

    Read the article

  • Forms Authentication across Sub-Domains on local IIS

    - by Parminder
    I asked this question at SO http://stackoverflow.com/questions/8278015/forms-nauthentication-across-sub-domains-on-local-iis Now asking it here. I know a cookie can be shared across multiple subdomains using the setting <forms name=".ASPXAUTH" loginUrl="Login/" protection="Validation" timeout="120" path="/" domain=".mydomain.com"/> in Web.config. But how to replicate same thing on local machine. I am using windows 7 and IIS 7 on my laptop. So I have sites localhost.users/ for my actual site users.mysite.com localhost.host/ for host.mysite.com and similar.

    Read the article

  • remote symbolic link / junction

    - by Blueberry
    Might be a pretty obvious one but have had some trouble finding solid answers. I have a directory on a windows network share containing different versions of an application. I would like to have a link to one of these called 'current', which will be a symbolic link to the directory sitting beside all the other versions and pointing to one of these. Creating this link seems to be more of an issue than I would have thought. Looks like symlink only shows the link on the same machine as where it was created (which is not going to work for obvious reasons) and junction needs to be run on the server which is practically impossible due to various restrictions. What would be the best way to go about this? Would I just need to copy the files twice or can I have a symbolic link which can be created and accessed remotely?

    Read the article

  • scp vs netatalk, samba, and/or vsftpd with External USB drive

    - by KitsuneYMG
    I set up a ubuntu server machine to share an ext2 formatted external usb drive. When attempting to copy a single 275MB files from said device through netatalk, I get estimated download rates at around 45 min. With samba and ftp (using vsftpd) I get 1+ hours! Using scp to copy the file results in complete download within 5 minutes. Another option, ssh+cp from external device to ~ and then using netatalk to grab it from there results in a total time of arounf 7 minutes. Does anyone have a clue what is misconfigured? Assuming that nothing is, is there any fs/pseudo-fs that would use the internal hdd as an intermediate location/onion-layer for the external hdd (for reads only)? Details: AppleVolumes.default: /mnt/ext USB allow:username cnidscheme:cdb options:usedots,upriv

    Read the article

  • How do I modify these VPN connection settings for Xfce?

    - by Dave M G
    I have signed up for a VPN (Virtual Private Network) service, and I configured it for use on my computer that runs Gnome Classic with the following instructions: In Terminal, install openvpn packages with sudo apt-get install network-manager-openvpn. 1. Restart the network manager with sudo restart network-manager 2. Run sudo wget https://www.xxxxxxx.com/ovpnconfigure.zip 3. Extract the files from the zip with unzip ovpnconfigure.zip. 4. Move cert.crt to /etc/openvpn 5. Open the Network Manager on the menu bar. 6. Choose add and select the OpenVPN connection type, and click Create. 7. Enter Private Internet Access SSL for the Connection Name. 8. Enter xxxxxx.xxxxxxxx.com for the Gateway 9. Select Password and enter your login credentials. 10. Browse and select the CA Certificate we saved in Step 3. 11. Choose Advanced and enable LZO Compression. 12. Apply and exit. 13. Connect using the Network Manager. It worked, but now I want to set up access to the same VPN service on another machine that runs Mythbuntu, which uses Xfce as its desktop manager. So every point from 5 on doesn't apply. How can I modify the above instructions so that I can get my VPN service working with Xfce. As a further note, while I can access the Xfce desktop directly if I need to, it's more convenient for me to access it via the command line and SSH from on of my other computers. A command line process would be ideal. (I looked for this, and found instructions only for PPTP access, whereas I need OpenVPN.)

    Read the article

  • IIS FTP service - download timeouts and restarts getting the data twice

    - by accel229
    We have an IIS FTP site on a Windows Server 2003 x64 machine. Application Layer Gateway service is disabled (so http://support.microsoft.com/kb/931130 does not apply). Windows Firewall service is disabled as well. Connection timeout for the FTP site (there is only one) is set to 1,200 seconds = 20 minutes. An external client can connect to the site, list directory contents and download small files. When a client attempts to download a large file (eg, if the download continues for 3 minutes, which is still under 20 minutes, but relatively long), the server sends all data, then the connection times out, the client issues REST / RETR commands attempting to restart the download since after the last byte (which I believe should succeed and receive exactly 0 bytes), and the server behaves as if the client tried to restart after byte 0, that is, it sends the entire file all over. Any ideas on how to fix this?

    Read the article

  • How to execute a script while booting Linux from flashdrive?

    - by Usman Ajmal
    I know i can make my script run at boot time in runlevel 2 by putting it in /etc/init.d/ and creating a symbolic to it in /etc/rc2.d but thats when Linux is on hard drive. I want to run my script from a flashdrive such that when a user plug in a flashdrive and powers ON the machine, it may start booting from the OS in flash drive and eventually executing my script. How can I achieve such a functionality? I have tried burning OS to flashdrive but I never succeeded in booting OS from flashdrive.

    Read the article

  • No DNS resolving with VPN (RRAS)

    - by Sven
    I have a RRAS server setup on a Windows 2003 machine with two NIC's. The VPN works like a charm, I can ping all the other computers on the network. But it fails when I try to access resources with hostnames. I searches for a solution but the ones I found are about RRAS setup with a remote DHCP server. But in my case it's the RRAS server that hands out the ip addresses (option for redirection for WINS, DNS is ON and set to the LAN NIC). I also heard something about FQDN.. but I don't really understand what that is.

    Read the article

  • When to use Nginx PHP Fast CGI with a TCP socket instead of a UNIX socket?

    - by user64204
    I've followed this guide to setup PHP in FastCGI mode with Nginx. This guide describes 2 ways of doing it: TCP socket and UNIX socket. I've ran some Apache Benchmark on my locale machine and here are the results: Below tests ran multiple times to get better average statistics: $ ab -c 200 -n 100000 http://.... APACHE: 1800 req/sec NGINX (TCP socket): 2500 req/sec NGINX (UNIX socket): 15000 req/sec As far as I understand, there is overhead with using a TCP socket rather than a UNIX socket, hence the better performance with the latter. However I was not expecting such a performance difference given that the TCP socket is on the localhost, and therefore would like to ask the following question: Q: Given the huge performance gain with using a UNIX socket, what are the configuration scenarios where it would make sense to use a TCP socket instead?

    Read the article

  • How secure is Remote Desktop from OSX to Windows Server 2003?

    - by dwhsix
    It's unclear to me exactly how secure Remote Desktop access from OSX to a Windows Server 2003 machine is. Is the communication encrypted by default? What level of encryption? Are there best practices for making this as secure as possible? I found http://www.mobydisk.com/techres/securing_remote_desktop.html but it's unclear how much of that is still relevant for current versions of RDP and Windows Server. I know I can tunnel RDP over ssh, but is that overkill or redundant? Thanks...

    Read the article

  • Is there any danger in disabling windows firewall on a azure worker role?

    - by NullReference
    I'm trying to troubleshoot a bug on our Azure worker role where we occasionally get the error "Unable to read data from the transport connection: An established connection was aborted by the software in your host machine". This error occurs when we are connecting to outside resources like google auth servers. A few people have recommended disabling the firewall\antivirus on the server. I'm just wondering what kind of security risk we would take by doing this. The server doesn't have iis installed but would it be vulnerable to hacking without the firewall? Thanks

    Read the article

  • WebLogic 12c training in Dutch–May 10th & 11th 2012 Utrecht Netherlands

    - by JuergenKress
    Axis into ICT offers you the opportunity to increase your skills. We are organizing ‘Bring Your Own Laptop Knowledge Sessions‘. In a small group of up to 8 people we are going discuss all the practical aspects of WebLogic Server you ever wanted to know. This is not a standard course, but a training where applying the material in practice is of importance. All participants will receive their own virtual machine, which offers you to ability to continue afterwards with your own practice environment. By keeping the groups small we create an informal atmosphere with plenty of room for all your questions or to even discuss your specific situation. The approach is highly interactive; after all you are attending to increase your knowledge. Topics that will be covered Introduction JVM Tuning Deployment Diagnostic Framework Class Loading Security Configure Resources Clustering Scripting Register for this session You are interested in the ‘Bring Your Own Laptop Knowledge Sessions: WebLogic 12c’? Register for one of two possibilities by using the form below. After registration you will receive a confirmation by e-mail. Training will be in Dutch! Date: May 10 & 11 2012 from 09:30 – 17:00 hrs Location: Axis into ICT Headquarters (Utrecht) Expenses: € 700,- per person (VAT excluded) For registration and details please visit our website. Want to promote your event? Let us know Twitter @wlscommunity! WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Axis,education,WebLogic training,WebLogic,WebLogic Community,OPN,Oracle,Jürgen Kress,WebLogic 12c

    Read the article

  • Can't connect to IIS7 on one of my machines

    - by user38974
    Hello, I have 2 computers, both running Win7 Professional x64. Computer "A" (192.168.0.10) is my work machine, it contains my tools etc. Computer "B" (192.168.0.15) is supposed to be my build server / web server for my projects I've installed IIS on "B", and installed IIS7 remote manager on "A". I'm trying to connect from A's IIS7 Manager to B's IIS but I fail. I have little knowledge of IIS, and I feel that's the main reason. I can ping B from A and get positive results so the machines do see each other. A and B are in the same workgroup but not in a domain (if that matters) - they're in my home network. What do I need to do to "see" B's IIS?

    Read the article

  • Apple Software Update Server for Windows

    - by Matthew Iselin
    We have just added a few iMacs to our system and we've found that they all want to download about 1.6 GB of updates... not so great when we only have limited monthly bandwidth! All of our Windows machines just use WSUS, which works great in our environment. It'd be nice if we could do the same for the iMacs without purchasing an additional Mac for a server role. So is it possible to run Apple's Software Update Server on a Windows server? Or do we need to look at purchasing a Mac in order to distribute updates across our clients? Alternatively, could we set up one of the iMacs to run the update server for the other iMacs whilst it is being used as a standard machine (ie, not installing OSX server, and keeping it available for staff to use)?

    Read the article

  • Host a SSTP VPN Server on Windows 8

    - by Maarten
    I have a small server computer running Windows 8 at home. Currently it is hosting a PPTP VPN server using the build-in Windows 8 functionality for that. What I would want is something more secure, like an SSTP VPN server. However, I can't find any functionality of windows 8 or 3rd party software that can HOST a SSTP vpn server on Windows 8. I've only seen Client stuff and vpn pass trough services via google, all which i don't want/need. The only HOST stuff i find via google is the PPTP i set up currently. Is there any way of hosting a SSTP VPN server on my home machine? Thanks in advance, Maarten

    Read the article

  • How do I set up a bridge on Ubuntu GNOME 14.04

    - by NJRandy
    I found a guide for setting up a bridge in Fedora and was trying this: $ nmcli connection delete p33p1 $ nmcli connection add con-name br0 type bridge ifname br0 autoconnect yes $ nmcli connection add con-name p33p1 type bridge-slave ifname p33p1 master br0 autoconnect yes I found that $ nmcli con delete uuid [uuid here] accomplished the first step. nmcli connection does not have an 'add' action in this distribution. Please help me do the 2nd and 3rd steps. Context: I am trying to set up a virtual machine. I believe this is a necessary step for the VM to access my network and the internet. Please feel free to correct me if I am wrong! BTW, I am a linux newbie, tech oldie. Thank you.

    Read the article

  • Sometimes tabs in notepad++ won't make a new window when dragged out

    - by darenw
    Long-time Linux user on a Windows 7 machine, using Notepad++ to edit multiple text files. Sometimes I can drag a tab out of the notepad++ window onto the desktop to get a new notepad++ window. This is a very nice feature. But sometimes when I try to drag a tab out, nothing happens. I don't see what is different about these tabs or the files they contain. It is repeatable; the same tab still won't make a new window. I'm not familiar enough with Windows and its strange ways to begin to guess what is going on, unless it's a bug. How can I make all tabs draggable-to-new-windowable, no exceptions?

    Read the article

  • What you'd need to setup BBS?

    - by raspi
    What I need to setup BBS nowadays? I'm thinking of BBBS or PCBoard (no telnet! too new technology). What I've thinked so far, I'd need: virtual machine which runs DOS and hook that virtual COM-port to somekind of virtual VoIP modem software somehow (is there any?). How you can call to it across internet? Can you use HyperTerminal straight with that virtual/real modem? Or will VoIP just garble the modem data and nothing will work?

    Read the article

  • How can I create a pen drive that I can boot from, and then install Win98 from?

    - by rossmcm
    I have a HP Compaq t5515 thin client computer with a flash disk and USB port. I want to put Win98 onto it, replacing whatever is on there now (I think it is some Linux-based thing). I can find stuff about putting Win98 onto a pen drive and running from that, but I can't find any info about installing Windows 98 from a pen drive onto a sep[arate system. Is it just a matter of making the pen drive bootable to DOS copying the contents of a Win98 installation CD onto the pen drive booting the HP machine from the pen drive running SETUP.EXE from the pen drive? Any pointers appreciated. TIA

    Read the article

  • Creating a file server - How can I use a large VHD file in Hyper-V? (700GB)

    - by barfoon
    Hey everyone, After a few discussions (here, here, and here), I am still unable to create a simple VM that will be used as a fileserver hosted on my Hyper-V box. I have created a fixed 700GB SCSI drive (.vhd file), as I have learned an IDE drive of this size is not possible. Not to sound too cynical, but its blown me away at how much trouble its been to create a large amount of space and start using it. What is the best way to create a fileserver with a drive of this size hosted on Hyper-V Server 2008, and how can I get it going??? Inclusion of OS, driver, integration tools etc, anything you feel is required would be greatly appreciated. Extra information I am using the stand-alone version of Hyper-V server, and not Windows Server 2008. I have tried loading the Linux Integration Tools (linked in the comments of the last link above) onto a SUSE 11 VM and the installation fails, the machine cannot see the vhd at all. Thanks very much,

    Read the article

< Previous Page | 488 489 490 491 492 493 494 495 496 497 498 499  | Next Page >