Search Results

Search found 15380 results on 616 pages for 'custom scrolling'.

Page 493/616 | < Previous Page | 489 490 491 492 493 494 495 496 497 498 499 500  | Next Page >

• What are the options for hosting a small Plone site? [closed]

  - by Tina Russell

  Possible Duplicate: How to find web hosting that meets my requirements? I’ve developed a portfolio website for myself using Plone 4, and I’m looking for someplace to host it. Most Plone hosting services seem to focus on large, corporate deployments, but I need something that I can afford on a very limited budget and fits a small, single-admin website. My understanding is that my basic options are thus: I can go with a hosting service that specifically provides Plone. I know of WebFaction, but what others exist? Also, I’d have two stipulations for a Plone hosting service: (a) It needs to use Plone 4, for which I’ve developed my site, and (b) it needs to allow me SSH access to a home directory (including the Plone configuration), so that I may use my custom development eggs and such. I could use a VPS hosting service. What are my options here? Again, I need something cheap and scaled to my level. I could use Amazon EC2 or a similar service (please tell me of any) and pay by the tiniest unit of data. I’m a little scared of this because I have no idea how to do a cost-benefit analysis between this and a regular VPS host. The advantage of this approach would be that I only pay for what I use, making it very scalable, but I don’t know how the overall cost would compare to any VPS host under similar circumstances. What factors enter into the cost of Amazon EC2? What can I expect to pay under either option for regular traffic for a new website? Which one is more desirable for when a rush of visitors drive up my bandwidth bill? One last note: I know Plone isn’t common for websites for individuals, but please don’t try to talk me out of it here; that’s a completely different subject. For now, assume I’m sticking with Plone for good. Also, I have seen the Plone hosting services list on Plone.org—it’s twenty pages long, and the first page was nothing but professional Plone consulting services that sometimes offer hosting for business clients. So, that wasn’t much help. Thank you!

  Read the article

• Virtual Developer Day: Oracle Fusion Development - December 11th - 10:00-14:00 CET

  - by Richard Lefebvre

  Get up to date and learn everything you wanted to know about Oracle ADF & Fusion Development plus live Q&A chats with Oracle technical staff. Oracle Application Development Framework (ADF) is the standards based, strategic framework for Oracle Fusion Applications and Oracle Fusion Middleware. Oracle ADF's integration with the Oracle SOA Suite, Oracle WebCenter and Oracle BI creates a complete productive development platform for your custom applications. Join us at this FREE virtual event and learn the latest in Fusion Development including: Is Oracle ADF development faster and simpler than Forms, Apex or .Net? Mobile Application Development with ADF Mobile Oracle ADF development with Eclipse Oracle WebCenter Portal and ADF Development Application Lifecycle Management with ADF Building Process Centric Applications with ADF and BPM Oracle Business Intelligence and ADF Integration Live Q&A chats with Oracle technical staff Developer lead, manager or architect – this event has something for everyone. Don't miss this opportunity. December 11th, 2012 9:00 – 13:00 GMT 10:00 – 14:00 CET 12:00 – 16:00 AST 13:00 – 17:00 MSK 14:30 – 18:30 IST Register online now for this FREE event! Agenda 9:00 a.m. – 9:30 a.m. Opening 9:30 a.m. – 10:00 a.m. Keynote Oracle Fusion Development Track 1 Introduction to Fusion Development Track 2 What's New in Fusion Development Track 3 Fusion Development in the Enterprise Track 4 Hands On Lab - WebCenter Portal and ADF Lab w/ JDeveloper 10:00 a.m. – 11:00 a.m. Is Oracle ADF development faster and simpler than Forms, Apex or .Net? Mobile Application Development with ADF Mobile Oracle WebCenter Portal and ADF Development Lab materials can be found on event wiki here. Q&A about the lab is available throughout the event. 11:00 a.m. – 12:00 p.m. Rich Web UI made simple – an ADF Faces Overview Oracle Enterprise Pack for Eclipse - ADF Development Building Process Centric Applications with ADF and BPM 12:00 p.m. – 1:00 p.m. Next Generation Controller for JSF Application Lifecycle Management for ADF Oracle Business Intelligence and ADF Integration View Session Abstracts We look forward to welcoming you at this free event!  

  Read the article

• Rendering another screen on top of main game screen in fullscreen mode

  - by wolf

  my game runs in fullscreen mode and uses active rendering. The graphics are drawn on the fullscreen window in each game loop: public void render() { Window w = screen.getFullScreenWindow(); Graphics2D g = screen.getGraphics(); renderer.render(g, level, w.getWidth(), w.getHeight()); g.dispose(); screen.update(); } This is the screen.update() method: public void update(){ Window w = device.getFullScreenWindow(); if(w != null){ BufferStrategy s = w.getBufferStrategy(); if(!s.contentsLost()){ s.show(); } } } I want to display another screen on my main game screen (menu, inventory etc). Lets say I have a JPanel inventory, which has a grid of inventory cells (manually drawn) and some Swing components like JPopupMenu. So i tried adding that to my window and repainting it in the game loop, which worked okay most of the time... but sometimes the panel wouldn't get displayed. Blindly moving things around in the inventory worked, but it just didn't display. When i alt-tabbed out and back again, it displayed properly. I also tried drawing the rest of the inventory on my full screen window and using a JPanel to display only the buttons and popupmenus. The inventory displayed properly, but the Swing components keep flickering. I'm guessing this is because I don't know how to combine active and passive rendering. public void render() { Graphics2D g = screen.getGraphics(); invManager.render(g); g.dispose(); screen.update(); invPanel.repaint(); } Should i use something else instead of a JPanel? I don't really need active rendering for these screens, but I don't understand why they sometimes just don't display. Or maybe I should just make my own custom components instead of using Swing? I also read somewhere that using multiple panels/frames in a game is bad practice so should I draw everything on one window/frame/panel? If I CAN use JPanels for this, should I add and remove them every time the inventory is toggled? Or just change their visibility?

  Read the article

• XNA extending an existing Content type

  - by Maarten

  We are doing a game in XNA that reacts to music. We need to do some offline processing of the music data and therefore we need a custom type containing the Song and some additional data: // Project AudioGameLibrary namespace AudioGameLibrary { public class GameTrack { public Song Song; public string Extra; } } We've added a Content Pipeline extension: // Project GameTrackProcessor namespace GameTrackProcessor { [ContentSerializerRuntimeType("AudioGameLibrary.GameTrack, AudioGameLibrary")] public class GameTrackContent { public SongContent SongContent; public string Extra; } [ContentProcessor(DisplayName = "GameTrack Processor")] public class GameTrackProcessor : ContentProcessor<AudioContent, GameTrackContent> { public GameTrackProcessor(){} public override GameTrackContent Process(AudioContent input, ContentProcessorContext context) { return new GameTrackContent() { SongContent = new SongProcessor().Process(input, context), Extra = "Some extra data" // Here we can do our processing on 'input' }; } } } Both the Library and the Pipeline extension are added to the Game Solution and references are also added. When trying to use this extension to load "gametrack.mp3" we run into problems however: // Project AudioGame protected override void LoadContent() { AudioGameLibrary.GameTrack gameTrack = Content.Load<AudioGameLibrary.GameTrack>("gametrack"); MediaPlayer.Play(gameTrack.Song); } The error message: Error loading "gametrack". File contains Microsoft.Xna.Framework.Media.Song but trying to load as AudioGameLibrary.GameTrack. AudioGame contains references to both AudioGameLibrary and GameTrackProcessor. Are we maybe missing other references? EDIT Selecting the correct content processor helped, it loads the audio file correctly. However, when I try to process some data, e.g: public override GameTrackContent Process(AudioContent input, ContentProcessorContext context) { int count = input.Data.Count; // With this commented out it works fine return new GameTrackContent() { SongContent = new SongProcessor().Process(input, context) }; } It crashes with the following error: Managed Debugging Assistant 'PInvokeStackImbalance' has detected a problem in 'C:\Users\Maarten\Documents\Visual Studio 2010\Projects\AudioGame\DebugPipeline\bin\Debug\DebugPipeline.exe'. Additional Information: A call to PInvoke function 'Microsoft.Xna.Framework.Content.Pipeline!Microsoft.Xna.Framework.Content.Pipeline.UnsafeNativeMethods+AudioHelper::OpenAudioFile' has unbalanced the stack. This is likely because the managed PInvoke signature does not match the unmanaged target signature. Check that the calling convention and parameters of the PInvoke signature match the target unmanaged signature. Information from logger right before crash: Using "BuildContent" task from assembly "Microsoft.Xna.Framework.Content.Pipel ine, Version=4.0.0.0, Culture=neutral, PublicKeyToken=842cf8be1de50553". Task "BuildContent" Building gametrack.mp3 -> bin\x86\Debug\Content\gametrack.xnb Rebuilding because asset is new Importing gametrack.mp3 with Microsoft.Xna.Framework.Content.Pipeline.Mp3Imp orter Im experiencing exactly this: http://forums.create.msdn.com/forums/t/75996.aspx

  Read the article

• debootstrap or virt-install Ubuntu Server Maverick fails

  - by poelinca

  Oki so running any kind of variation of debootsrap i get the following error I: Extracting zlib1g... W: Failure trying to run: chroot /lxc/iso/dodo mount -t proc proc /proc debootstrap.log : mount: permission denied if i manualy chroot into the directory then i get promted with: id: cannot find name for group ID 0 I have no name!@...# i tryed addgroup but it's not installed , apt-get/aptitude : command not found , so i can't do anything with it . I've tryed ubuntu-vm-builder but since it's calling debootstrap i get the same error . Played with it for a few days and then i stoped and gaved virt-install a try , everithing works till i get to the console to finish the install witch shows only : Escape character is ^] and nothing more , no matter what i type . So basicly what i'm trying to do is build a usable chroot system so i can use it with lxc or libvirt . What are my options to get containers/virtualisation up and running ? I've read somewhere that i can use openvz templates with lxc or libvirt ? but how ? Let me know if you need aditional info ( p.s. doing all this on a dedicated server so i can't access it by hand , only ssh , plus on my local pc running ubuntu desktop maverick everithing works ) . EDIT Getting closer , i managed to understand how to use an openvz template with lxc , now the problem comes with the network bridge lxc-start: invalid interface name: br0 # Use same bridge device used in your controlling host setup lxc-start: failed to process 'lxc.network.link = br0 # Use same bridge device used in your controlling host setup ' lxc-start: failed to read configuration file i followed the exact steps to create a bridge and lxc conf looks like: lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 # Use same bridge device used in your controlling host setup lxc.network.hwaddr = {a1:b2:c3:d4:e5:f6} # As appropiate (line only needed if you wish to dhcp later) lxc.network.ipv4 = {10.0.0.100} # (Use 0.0.0.0 if you wish to dhcp later) lxc.network.name = eth0 # could likely be whatever you want Since it's not working i know smth is wrong so could somebody guyde me ? EDIT , looks like the base install was using an custom kernel ( bzImage-2.6.34.6-xxxx-grs-ipv6-65 ) for witch you i didn't found the headers , i did a update-grub after i installed a new kernel , edited menu.lst and no it's using 2.6.35-23-server and now debootstrap is working just fine same as ubuntu-vm-builder .

  Read the article

• Indie Software Developers - How do I handle taxes?

  - by Connor

  I apologize if this is the wrong site to post on, perhaps someone could point me to the proper place if it is not. Hello, I am 17 years old and currently develop applications/games for Android and iPhone as well as develop internet websites and code a variety of my own projects. I have been very fortunate and have made a large amount of money and continue to make money online to the point where I do not need a stable job, though I'd like to get one after college. I've never held a job anywhere, and have never had to pay taxes. I'm coming into a lot of issues and I am quite confused. I get money from MANY sources- 15 different advertisement networks(!), 4 different payment processors, 5 different affiliate networks and a variety of other sources. All of them pay to different places and at different times (checking account, PayPal, reloadable debit card, ect.) I essentially have a list in a Notepad with names and login information for each source. I have also created a PHP script that uses cURL to grab all the revenue from each service, add it all up, then text me every few hours so I can keep track. It's a mess, but it's working OK, and I can create custom reports (for IRS?). But enough of that, my questions are about taxes in the US, and how indie developers handle it all. I'm at slightly over $250k so far this year, with negligible earnings last year. I have it all stockpiled in a bank account and haven't touched it, I'm a bit scared to. What do I file as? A sole proprietor, a business, just a regular person? How can I handle all of the different revenue sources? (AdSense, CJ, LinkShare) So far none of them have sent me any paperwork on taxes and I've read that I'm supposed to pay taxes quarterly? Do I need paperwork from EACH source to file? Or can I just say I got $x total and that'd be it? What percentage do you pay of total earnings? Average? Should I create an LLC? A corporation? Or stay as a developer? What would be the cheapest options? Could I go to jail? I haven't touched the money except a few dollars to help my parents pay the mortgage once. Any insight would be great. My parents have no idea what I should do, both have no forms of higher education and both have no high school diploma's. They just live day by day with simple jobs. I appreciate any help or experience with this.

  Read the article

• SharePoint 2010 Data Retrival Techinques

  - by Jayant Sharma

  In SharePoint, we have two options to perform CRUD operation.1. using server side code2. using client side codeusing server side code, we have 1. CAML2. LINQusing client side code, we have 1. Client Object Model    1.1.      Managed Client Object Model     1.2.     Silverlight Client Object Model    1.3.     ECMA Client Object Model2. SharePoint Web Services3. ADO Data Service (based on REST Web Services)4. Using RPC Call (owssvr.dll)Which and when these options are used depend upon requirements. Every options are certain advantages and disadvantages. So, before start development of any new sharepoint project, it is important to understand the limitations of different methods.Server Object Model is used when our application is host on the same server on which sharepoint is installed. while Client Side code is used to access sharepoint from client system. In SharePoint 2010 specially Client Object Model (COM) are introduced to perform the sharepoint operations from client system. Advantage of CAML:    -  It is fast.    -  Can be use it from all kind of technology like Silverlight, or Jquery    -  You can use U2U CAML Query builder to generate CAML Query.Disadvantage Of CAML:    - Error Prone, as we can detect the error only at runtimeAdvantage of LINQ:    -  Object Oriented technique (Object Relation Model)    -  LINQ  to SharePoint provider are working with Strongly Type List Item Objects, So intellisence are present at runtime    -  No need of knowledge of CAML    -  Less Error Prone as it as it uses C# syntex.    -  You can compare two Fields of SharePoint ListDisadvantage Of LINQ:    -  List Attachment is not supported in SPMetal Tool    -  Created By, Created, Modified and Modified By Fields are not created by SPMetal Tool.    -  Custom fields are not created by SPMetal Tools    -  External Lists are not supported    -  Though at backend LINQ genenates CAML Query so it is slower than directly using CAML in Code.  Advantage of Client Object Model    -  Used to access sharepoint from client system    -  No WebServer is required at Client End    - Can use Silverlight and JavaScripts to make better and fast User experienceDisadvantage of Client Object Model    -  You cannot use RunwithEleveatedPrivilege    - Cross Site Collection query are not possible    - Lesser API's are availableADO.Net Data Services:    -  Only List based operations are possible, other type of operations are not possible.SharePoint Web Services and RPC Call:    - Previously it was used in SharePoint 2007 but after the introduction  of Client Object Model,  Microsoft recommends not to use Web Services to fetch data from SharePoint. In SharePoint 2010 it is avaliable only for backward compatibility.Ref: http://msdn.microsoft.com/en-us/library/ee539764Jayant Sharma

  Read the article

• SQL SERVER – Weekly Series – Memory Lane – #050

  - by Pinal Dave

  Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Executing Remote Stored Procedure – Calling Stored Procedure on Linked Server In this example we see two different methods of how to call Stored Procedures remotely.  Connection Property of SQL Server Management Studio SSMS A very simple example of the how to build connection properties for SQL Server with the help of SSMS. Sample Example of RANKING Functions – ROW_NUMBER, RANK, DENSE_RANK, NTILE SQL Server has a total of 4 ranking functions. Ranking functions return a ranking value for each row in a partition. All the ranking functions are non-deterministic. T-SQL Script to Add Clustered Primary Key Jr. DBA asked me three times in a day, how to create Clustered Primary Key. I gave him following sample example. That was the last time he asked “How to create Clustered Primary Key to table?” 2008 2008 – TRIM() Function – User Defined Function SQL Server does not have functions which can trim leading or trailing spaces of any string at the same time. SQL does have LTRIM() and RTRIM() which can trim leading and trailing spaces respectively. SQL Server 2008 also does not have TRIM() function. User can easily use LTRIM() and RTRIM() together and simulate TRIM() functionality. http://www.youtube.com/watch?v=1-hhApy6MHM 2009 Earlier I have written two different articles on the subject Remove Bookmark Lookup. This article is as part 3 of original article. Please read the first two articles here before continuing reading this article. Query Optimization – Remove Bookmark Lookup – Remove RID Lookup – Remove Key Lookup Query Optimization – Remove Bookmark Lookup – Remove RID Lookup – Remove Key Lookup – Part 2 Query Optimization – Remove Bookmark Lookup – Remove RID Lookup – Remove Key Lookup – Part 3 Interesting Observation – Query Hint – FORCE ORDER SQL Server never stops to amaze me. As regular readers of this blog already know that besides conducting corporate training, I work on large-scale projects on query optimizations and server tuning projects. In one of the recent projects, I have noticed that a Junior Database Developer used the query hint Force Order; when I asked for details, I found out that the basic concept was not properly understood by him. Queries Waiting for Memory Allocation to Execute In one of the recent projects, I was asked to create a report of queries that are waiting for memory allocation. The reason was that we were doubtful regarding whether the memory was sufficient for the application. The following query can be useful in similar cases. Queries that do not have to wait on a memory grant will not appear in the result set of following query. 2010 Quickest Way to Identify Blocking Query and Resolution – Dirty Solution As the title suggests, this is quite a dirty solution; it’s not as elegant as you expect. However, it works totally fine. Simple Explanation of Data Type Precedence While I was working on creating a question for SQL SERVER – SQL Quiz – The View, The Table and The Clustered Index Confusion, I had actually created yet another question along with this question. However, I felt that the one which is posted on the SQL Quiz is much better than this one because what makes that more challenging question is that it has a multiple answer. Encrypted Stored Procedure and Activity Monitor I recently had received questionable if any stored procedure is encrypted can we see its definition in Activity Monitor.Answer is - No. Let us do a quick test. Let us create following Stored Procedure and then launch the Activity Monitor and check the text. Indexed View always Use Index on Table A single table can have maximum 249 non clustered indexes and 1 clustered index. In SQL Server 2008, a single table can have maximum 999 non clustered indexes and 1 clustered index. It is widely believed that a table can have only 1 clustered index, and this belief is true. I have some questions for all of you. Let us assume that I am creating view from the table itself and then create a clustered index on it. In my view, I am selecting the complete table itself. 2011 Detecting Database Case Sensitive Property using fn_helpcollations() I received a question on how to determine the case sensitivity of the database. The quick answer to this is to identify the collation of the database and check the properties of the collation. I have previously written how one can identify database collation. Once you have figured out the collation of the database, you can put that in the WHERE condition of the following T-SQL and then check the case sensitivity from the description. Server Side Paging in SQL Server CE (Compact Edition) SQL Server Denali is coming up with new T-SQL of Paging. I have written about the same earlier.SQL SERVER – Server Side Paging in SQL Server Denali – A Better Alternative,  SQL SERVER – Server Side Paging in SQL Server Denali Performance Comparison, SQL SERVER – Server Side Paging in SQL Server Denali – Part2 What is very interesting is that SQL Server CE 4.0 have the same feature introduced. Here is the quick example of the same. To run the script in the example, you will have to do installWebmatrix 4.0 and download sample database. Once done you can run following script. Why I am Going to Attend PASS Summit Unite 2011 The four-day event will be marked by a lot of learning, sharing, and networking, which will help me increase both my knowledge and contacts. Every year, PASS Summit provides me a golden opportunity to build my network as well as to identify and meet potential customers or employees. 2012 Manage Help Settings – CTRL + ALT + F1 This is very interesting read as my daughter once accidently came across a screen in SQL Server Management Studio. It took me 2-3 minutes to figure out how she has created the same screen. Recover the Accidentally Renamed Table “I accidentally renamed table in my SSMS. I was scrolling very fast and I made mistakes. It was either because I double clicked or clicked on F2 (shortcut key for renaming). However, I have made the mistake and now I have no idea how to fix this. If you have renamed the table, I think you pretty much is out of luck. Here are few things which you can do which can give you an idea about what your table name can be if you are lucky. Identify Numbers of Non Clustered Index on Tables for Entire Database Here is the script which will give you numbers of non clustered indexes on any table in entire database. Identify Most Resource Intensive Queries – SQL in Sixty Seconds #029 – Video Here is the complete complete script which I have used in the SQL in Sixty Seconds Video. Thanks Harsh for important Tip in the comment. http://www.youtube.com/watch?v=3kDHC_Tjrns Advanced Data Quality Services with Melissa Data – Azure Data Market For the purposes of the review, I used a database I had in an Excel spreadsheet with name and address information. Upon a cursory inspection, there are miscellaneous problems with these records; some addresses are missing ZIP codes, others missing a city, and some records are slightly misspelled or have unparsed suites. With DQS, I can easily add a knowledge base to help standardize my values, such as for state abbreviations. But how do I know that my address is correct? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Getting started with Document Set in SharePoint2010

  - by ybbest

  Folders are widely used in traditional file based system, in SharePoint world you can create folder in the document library as well. However, there is a new improved feature in SharePoint called Document Set; you can attach metadata to the document set. To get start with Document set, you can perforce the following steps. 1. Go to Site Settings >>Site collection features >>Activate the Document Sets feature. 2. After the Document Sets feature is activated, you will get a new content type called Document Set. 3. Next, we can create a custom content type called Loan Application Document Set that inherited from Document Set Content Type. 4. Then I create a new column called Application Number. 5. Add this field to the loan application content type 6. Create a new Content Type called Loan Contract form that inherited from Document content type. 7. Add the Application Number to the Loan Contract form content type. 8. Create a new Content Type called Loan Application form that inherited from Document content type and add Application Number to it.(The same step as above.) 9.Go to the Loan Application Document Set content type and go to the Document Set Settings. 10. You can define which content type you would like this Document set contains and you can also define the default document for each content type. When you create a new document set, those default documents will get automatically created in the document set. You can also define the Shared field that shared across content types; in my case I define the Application number and description as my shared fields. Finally, you can define the fields that you’d like to show in the document set welcome page. 11. Now create a new document library and attach those content types to the document library and create a new loan application document set. 12. You will see the default document created in the document set.If you updated Application Number on the document set , the field will get updated in the documents inside the document set as well.

  Read the article

• SQL SERVER – Creating All New Database with Full Recovery Model

  - by pinaldave

  Sometimes, complex problems have very simple solutions. Let us see the following email which I received recently. “Hi Pinal, In our system when we create new database, by default, they are all created with the Simple Recovery Model. We have to manually change the recovery model after we create the database. We used the following simple T-SQL code: CREATE DATABASE dbname. We are very frustrated with this situation. We want all our databases to have the Full Recovery Model option by default. We are considering the following methods; please suggest the most efficient one among them. 1) Creating a Policy; when it is violated, the database model can be fixed 2) Triggers at Server Level 3) Automated Job which goes through all the databases and checks their recovery model; if the DBA has not changed the model, then the job will list the Databases and change their recovery model Also, we have a situation where we need a database in the Simple Recovery Model as well – how to white list them? Please suggest the best method.” Indeed, an interesting email! The answer to their question, i.e., which is the best method to fit their needs (white list, default, etc)? It will be NONE of the above. Here is the solution in one line and also the easiest way: Just go to your Model database: Path in SSMS >> Databases > System Databases >> model >> Right Click Properties >> Options >> Recovery Model - Select Full from dropdown. Every newly created database takes its base template from the Model Database. If you create a custom SP in the Model Database, when you create a new database, it will automatically exist in that database. Any database that was already created before making changes in the Model Database will not be affected at all. Creating Policy is also a good method, and I will blog about this in a separate blog post, but looking at current specifications of the reader, I think the Model Database should be modified to have a Full Recovery Option. While writing this blog post, I remembered my another blog post where the model database log file was growing drastically even though there were no transactions SQL SERVER – Log File Growing for Model Database – model Database Log File Grew Too Big. NOTE: Please do not touch the Model Database unnecessary. It is a strict “No.” If you want to create an object that you need in all the databases, then instead of creating it in model database, I suggest that you create a new database called maintenance and create the object there. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, Readers Question, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• ADF @ Virtual Developer Day: Oracle Fusion Development;July 10th 2012

  - by JuergenKress

  Virtual Developer Day: Oracle Fusion Development Register now for this FREE hands-on online workshop Get up to date and learn everything you wanted to know about Oracle ADF & Fusion Development plus live Q&A chats with Oracle technical staff Oracle Application Development Framework (ADF) is the standards based, strategic framework for Oracle Fusion Applications and Oracle Fusion Middleware. Oracle ADF’s integration with the Oracle SOA Suite, Oracle WebCenter and Oracle BI creates a complete productive development platform for your custom applications. Join us at this FREE virtual event and learn the latest in Fusion Development including: Is Oracle ADF development faster and simpler than Forms, Apex or .Net? Mobile Application Development with ADF Mobile Oracle ADF development with Eclipse Oracle WebCenter Portal and ADF Development Application Lifecycle Management with ADF Building Process Centric Applications with ADF and BPM Oracle Business Intelligence and ADF Integration Live Q&A chats with Oracle technical staff Developer lead, manager or architect – this event has something for everyone. Don’t miss this opportunity. Tuesday, July 10, 2012 9:00 a.m. PT. – 1:00 p.m. PT 11:00 a.m. CT – 3:00 p.m. CT 12:00 p.m. ET – 4:00 p.m. ET 1:00 p.m. BRT – 5:00 p.m. BRT Agenda 9:00 a.m. Opening 9:30 a.m. Keynote: Oracle Fusion Development Track 1 Introduction to Fusion Development Track 2 What's New in Fusion Development Track 3 Fusion Development in the Enterprise 10:00 a.m. Is Oracle ADF Development Faster and Simpler than Oracle Forms, APEX or .Net? Mobile Application Development with ADF Mobile Oracle WebCenter Portal and ADF Development 11:00 a.m. Rich Web UI made simple – an ADF Faces Overview Oracle Enterprise Pack for Eclipse - ADF Development Building Process Centric Applications with ADF and BPM 12:00 noon Next Generation Controller for JSF Application Lifecycle Management for ADF Oracle Business Intelligence and ADF Integration Sessions abstracts Register online now! for this FREE event WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: OTN Virtual Developer Day,ADF,WebLogic,WebLogic basic,ias upgrade,C2B2,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• Best Platform/Engine for turn based Client/Server Android game

  - by Paradine

  I'm currently designing a turn based game for tablets. Initially for Android with porting to iOS later considered in design. I'm having trouble narrowing down the available technologies to even know where to spend my research time. I am hoping that if I explain what I am trying to achieve someone may be able to suggest a platform and/or engine. I've looked into some of the open source Engines ( http://www.cuteandroid.com/ten-open-source-android-2d-or-3d-game-engine-for-android-developers ) and some appear to handle much of what I might require - although with a higher focus on graphics than i need. Mages looks interesting although development appears to have ceased. If I could somehow leverage GoogleApps that would be excellent. Here is what I am trying to achieve: PvP turn based strategy game over internet - minimal animation and bandwidth required Players match up online using MetaGame system MatchID created on Resolution Server and Game starts Clients have 30 second countdown to select MoveString Clients sends small secure timestamped and MatchIDed MoveString to Resolution server Resolution server looks up Move String for each player, Resolves and Updates Players status in MatchID on Server Resolution server updates Client Views Repeat until victory conditions met - MatchID Closed, Rewards earned in MetaGame There will also need to be a full social and account system and metagame backend - but this could be running on separate system(s) Tablet in Offline mode would be catalog browsing and perhaps single player AI - bum I'm focusing on the Resolution Server at this point I'm not even certain if I would be looking at an Android App or a WebApp at this stage! I want a custom GUI so I guess an app - but maybe as I have little animation a WebApp might also work. Probably some combination of both. There will be very small overhead in data between client server - essentially a small text string every 30 seconds sent to the Resolution server which looks up the Effect and applies it to the Opponents string and determines some results to apply to the match. The client view is updated minimally with the results (only 5 in game Integers tracked) - perhaps triggering small animations/popups on the client to show the end result. e.g Explosion. If you have suggestions for a good technology or platform to best achieving the Resolution Server I'd love to hear. Also if you have experience with open source Engines - and could narrow down which (if any ) might be most suitable that would be a big help. Thanks in advance

  Read the article

• How to Quickly Add Multiple IP Addresses to Windows Servers

  - by Sysadmin Geek

  If you have ever added multiple IP addresses to a single Windows server, going through the graphical interface is an incredible pain as each IP must be added manually, each in a new dialog box. Here’s a simple solution. Needless to say, this can be incredibly monotonous and time consuming if you are adding more than a few IP addresses. Thankfully, there is a much easier way which allows you to add an entire subnet (or more) in seconds. Adding an IP Address from the Command Line Windows includes the “netsh” command which allows you to configure just about any aspect of your network connections. If you view the accepted parameters using “netsh /?” you will be presented with a list of commands each which have their own list of commands (and so on). For the purpose of adding IP addresses, we are interested in this string of parameters: netsh interface ipv4 add address Note: For Windows Server 2003/XP and earlier, “ipv4″ should be replaced with just “ip” in the netsh command. If you view the help information, you can see the full list of accepted parameters but for the most part what you will be interested in is something like this: netsh interface ipv4 add address “Local Area Connection” 192.168.1.2 255.255.255.0 The above command adds the IP Address 192.168.1.2 (with Subnet Mask 255.255.255.0) to the connection titled “Local Area Network”. Adding Multiple IP Addresses at Once When we accompany a netsh command with the FOR /L loop, we can quickly add multiple IP addresses. The syntax for the FOR /L loop looks like this: FOR /L %variable IN (start,step,end) DO command So we could easily add every IP address from an entire subnet using this command: FOR /L %A IN (0,1,255) DO netsh interface ipv4 add address “Local Area Connection” 192.168.1.%A 255.255.255.0 This command takes about 20 seconds to run, where adding the same number of IP addresses manually would take significantly longer. A Quick Demonstration Here is the initial configuration on our network adapter: ipconfig /all Now run netsh from within a FOR /L loop to add IP’s 192.168.1.10-20 to this adapter: FOR /L %A IN (10,1,20) DO netsh interface ipv4 add address “Local Area Connection” 192.168.1.%A 255.255.255.0 After the above command is run, viewing the IP Configuration of the adapter now shows: Latest Features How-To Geek ETC How To Create Your Own Custom ASCII Art from Any Image How To Process Camera Raw Without Paying for Adobe Photoshop How Do You Block Annoying Text Message (SMS) Spam? How to Use and Master the Notoriously Difficult Pen Tool in Photoshop HTG Explains: What Are the Differences Between All Those Audio Formats? How To Use Layer Masks and Vector Masks to Remove Complex Backgrounds in Photoshop Bring Summer Back to Your Desktop with the LandscapeTheme for Chrome and Iron The Prospector – Home Dash Extension Creates a Whole New Browsing Experience in Firefox KinEmote Links Kinect to Windows Why Nobody Reads Web Site Privacy Policies [Infographic] Asian Temple in the Snow Wallpaper 10 Weird Gaming Records from the Guinness Book

  Read the article

• Creating metadata value relationships

  - by kyle.hatlestad

  I was recently asked an question about an interesting use case. They wanted content to be submitted into UCM with a particular ID in a custom metadata field. But they wanted that ID to be translated during submission into an employee name in another metadata field upon submission. My initial thought was that this could be done with a dependent choice list (DCL). One option list field driving the choices in another. But this didn't work in this case for a couple of reasons. First, the number of IDs could potentially be very large. So making that into a drop-down list would not be practical. The preference would be for that field to simply be a text field to type in the ID. Secondly, data could be submitted through different methods other then the web-based check-in form. And without an interface to select the DCL choices, the system needed a way to determine and populate the name field. So instead I went the approach of having the value of the ID field drive the value of the Name field using the derived field approach in my rule. In looking at it though, it was easy to simply copy the value of the ID field into the Name field...but to have it look up and translate the value proved to be the tricky part. So here is the approach I took... First I created my two metadata fields as standard text fields in the Configuration Manager applet. Next I create a table that stores the relationship between the IDs and Names. I then create a View into that table and set the column to the EmployeeID. I now create a new Application Field and set it as an option list using the View I created in the previous step. The reason I create it as an Application field is because I don't need to display the field or store a value in it. I simply need to make use of the option list in the next step... Finally, I create a Rule in which I select the Employee Name field and turn on the 'Is derived field' checkbox. I edit the derived value and add a new condition. Because the option list is a Application field and not an Information field, I can't use the Compute button. Instead, I insert this line directly in the Value field: @getFieldViewValue("EmployeeMapping",#active.xEmployeeID, "EmployeeName") The "EmployeeMapping" parameter designates that the value should be pulled from the EmployeeMapping Application field that I had created in the previous step. The #active.xEmployeeID field is the ID value that should be pulled from what the user entered. "EmployeeName" is the column name in the table which has the value which corresponds to the ID. The extracted name then becomes the value within our Employee Name field. That's it. You can then add additional Rules to make the Name field read-only/hidden on the check-in page and such.

  Read the article

• Manageability at Oracle Openworld: a Guide to sessions for Partners

  - by Javier Puerta

  A large number of sessions focusing on Manageability will be taking place during the week of Oracle Openworld in San Francisco. To help you organize your schedule I am including below a list of sessions and events around Manageability that you will find of interest. PARTNER SPECIFIC SESSIONS Date/Time/Location  Session   Monday, October 1st, 2011 at 15:30 - 18:00 PST Grand Hyatt San Francisco 345 Stockton Street, San Francisco (Conference Theater) (It is a 15 minute walk from OOW Moscone Center. See directions here) Exadata & Manageability EMEA Partner Community Forum.- Listen to other partners share their experiences in selling and implementing Exadata and Manageability projects, and have a direct dialogue with some of the Oracle executives that are driving the strategy of the company in these areas. Agenda Welcome - Hans-Peter Kipfer, VP, Engineered Systems Oracle EMEA Next challenges in building and managing clouds - Javier Cabrerizo, VP, Business Development for Exadata, Oracle Corp. Partner Experiences: IT modernization, simplification and cost reduction: The case of a customer in Transportation & Logistics with custom applications and SAP. - Francisco Bermudez, Country Leader Infrastructure Services, Capgemini, Spain Nvision cloud project - Dmitry Krasilov, Head of Oracle Competence Center, Nvision Group, Russia From Exadata Ready to Exadata Optimized: An ISV Experience - Miguel Alves, Product Business Solutions Manager, WeDo Technologies, Portugal To confirm your participation send an email to [email protected] Tuesday, Oct 2, 11:45 AM - 12:45 PM - Marriott Marquis - Golden Gate A Developing Services for Private and Public Clouds.- The Oracle Cloud provides new business opportunities, secures business applications and data, and provides operational efficiencies and cost savings. For customers lacking the skill or time to architect, develop, or build a cloud, there is a growing demand for services practice partners that can deliver and manage Oracle Cloud solutions. In this session,• Become familiar with services examples and use cases that demonstrate how an Oracle Cloud can provide a solution to a customer’s needs today• Learn about Oracle architecture and best practices available for an Oracle Cloud instances• Identify the right Oracle technology and the optimal model for meeting customer needs while providing excellent revenues and an optimal margin for services delivered Wednesday, Oct 3, 1:15 PM - 2:15 PM - Marriott Marquis - Golden Gate B Using Management Already Built into Oracle Products: Oracle Enterprise Manager .- Engineered into Oracle products are management capabilities ready to be used. In this session, applicable to all partners, understand the growing market opportunities and how to use or include Oracle Enterprise Manager as part of your solution or services. Other Cloud sessions for Partners at the Oracle PartnerNetwork Exchange  Click here.-     OOW CUSTOMER SESSIONS   Download the Focus On Oracle Enterprise Manager Cloud Control 12c (and Private Cloud) guide for a full list of Exadata OOW sessions.  

  Read the article

• SOA & BPM @ Virtual Developer Day: Oracle Fusion Development–July 10th 2012

  - by JuergenKress

  Virtual Developer Day: Oracle Fusion Development Register now for this FREE hands-on online workshop Get up to date and learn everything you wanted to know about Oracle ADF & Fusion Development plus live Q&A chats with Oracle technical staff Oracle Application Development Framework (ADF) is the standards based, strategic framework for Oracle Fusion Applications and Oracle Fusion Middleware. Oracle ADF’s integration with the Oracle SOA Suite, Oracle WebCenter and Oracle BI creates a complete productive development platform for your custom applications. Join us at this FREE virtual event and learn the latest in Fusion Development including: Is Oracle ADF development faster and simpler than Forms, Apex or .Net? Mobile Application Development with ADF Mobile Oracle ADF development with Eclipse Oracle WebCenter Portal and ADF Development Application Lifecycle Management with ADF Building Process Centric Applications with ADF and BPM Oracle Business Intelligence and ADF Integration Live Q&A chats with Oracle technical staff Developer lead, manager or architect – this event has something for everyone. Don’t miss this opportunity. Tuesday, July 10, 2012 9:00 a.m. PT. – 1:00 p.m. PT 11:00 a.m. CT – 3:00 p.m. CT 12:00 p.m. ET – 4:00 p.m. ET 1:00 p.m. BRT – 5:00 p.m. BRT Agenda 9:00 a.m. Opening 9:30 a.m. Keynote: Oracle Fusion Development Track 1 Introduction to Fusion Development Track 2 What's New in Fusion Development Track 3 Fusion Development in the Enterprise 10:00 a.m. Is Oracle ADF Development Faster and Simpler than Oracle Forms, APEX or .Net? Mobile Application Development with ADF Mobile Oracle WebCenter Portal and ADF Development 11:00 a.m. Rich Web UI made simple – an ADF Faces Overview Oracle Enterprise Pack for Eclipse - ADF Development Building Process Centric Applications with ADF and BPM 12:00 noon Next Generation Controller for JSF Application Lifecycle Management for ADF Oracle Business Intelligence and ADF Integration Sessions abstracts Register online now! for this FREE event SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: OTN Virtual Developer Day,Edutcation,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

  Read the article

• SSIS Expression Editor & Tester

  Published today on CodePlex is the SSIS Expression Editor & Tester project. If you want to try it just pop over to CodePlex and download it. About five years ago I developed my own expression editor control. It first got used in our custom tasks as the MS editor didn’t become available until SQL 2005 SP1, but even then it had some handy features I preferred. For example resizable panes so that if your expression result was more than two lines you could see them all. It also meant I could change the functions available in the tree view, the most obvious use being to add some handy snippets and samples that I used a lot. This quickly developed into a small expression testing tool. I’d develop complex expressions using my editor and then copy it back into the package itself. I have been meaning to make the tool available for some time and finally made the effort, the code is checked-in and the signed downloads are published on CodePlex. There are two flavours, SQL 2005 or 2008, and just a simple zip file to download and extract. The tool doesn’t need installing, and is completely portable. It does need SSIS to be installed on the local machine though. Each zip file contains two files: ExpressionTester.exe – The tool itself, run this. ExpressionEditor.dll – The reusable editor control. A while ago the gentlemen behind BIDS Helper noticed the editor on a task and asked about using it. This became incorporated into their variable window extensions feature. To try and help them and anyone else that wants to use the editor control, it is available as a single assembly that you can reference yourself, and of course all the source code is on CodePlex too. Just add a reference to the ExpressionEditor.dll assembly and you should be up and running in no time. There is a sample project Package Test in the source code which shows how to use the editor control form in it’s simplest form, or if you want to host control directly then the tester tool is a perfect example.

  Read the article

• BPEL 11.1.1.6 Certified for Prebuilt E-Business Suite 12.1.3 SOA Integrations

  - by Steven Chan (Oracle Development)

  Service Oriented Architecture (SOA) integrations with Oracle E-Business Suite can either be custom integrations that you build yourself or prebuilt integrations from Oracle.  For more information about the differences between the two options for SOA integrations, see this previously-published certification announcement. There are five prebuilt BPEL business processes by Oracle E-Business Suite Release 12 product teams: Oracle Price Protection (DPP) Complex Maintenance, Repair & Overhaul (CMRO/AHL) Oracle Transportation Management (WMS, WSH, PO) Advanced Supply Chain Planning (MSC) Product Information Management (PIM/EGO) Last year we announced the certification of BPEL 11.1.1.5 for Prebuilt E-Business Suite 12.1.3 SOA integrations.  The five prebuilt BPEL processes have now been certified with Oracle BPEL Process Manager 11g version 11.1.1.6 (in Oracle Fusion Middleware SOA Suite 11g).  These prebuilt BPEL processes are certified with Oracle E-Business Suite Release 12.1.3 and higher. Note: The Supply Chain Trading Connector (CLN) product team has opted not to support BPEL 11g with their prebuilt business processes previously certified with BPEL 10.1.3.5.  If you have a requirement for that certification, I would recommend contacting your Oracle account manager to ensure that the Supply Chain team is notified appropriately.  For additional information about prebuilt integrations with Oracle E-Business Suite Release 12.1.3, please refer to the following documentation: Integrating Oracle E-Business Suite Release 12 with Oracle BPEL available in Oracle SOA Suite 11g (Note 1321776.1) Oracle Fusion Middleware 11g (11.1.1.6.0) Documentation Library Installing Oracle SOA Suite and Oracle Business Process Management Suite Release Notes for Oracle Fusion Middleware 11g (11.1.1.6) Certified Platforms Linux x86 (Oracle Linux 4, 5) Linux x86 (RHEL 5) Linux x86 (SLES 10) Linux x86-64 (Oracle Linux 4, 5, 6) Linux x86-64 (RHEL 5) Linux x86-64 (SLES 10)  Oracle Solaris on SPARC (64-bit) (9, 10, 11) HP-UX Itanium (11.23, 11.31) HP-UX PA-RISC (64-bit) (11.23, 11.31) IBM AIX on Power Systems (64-bit) (5.3, 6.1, 7) IBM: Linux on System z (RHEL 5, SLES 10) Microsoft Windows Server (32-bit) (2003, 2008)  Microsoft Windows x64 (64-bit) (2008 R2) Getting SupportIf you need support for the prebuilt EBS 12.1.3 BPEL business processes, you can log Service Requests against the Applications Technology Group product family. Related Articles BPEL 11.1.1.5 Certified for Prebuilt E-Business Suite 12.1.3 SOA Integrations Webcast Replay Available: SOA Integration Options for E-Business Suite Securing E-Business Suite Web Services with Integrated SOA Gateway

  Read the article

• Tips On Using The Service Contracts Import Program

  - by LuciaC

  Prior to release 12.1 there was no supported way to import contracts into the EBS Service Contracts application - there were no public APIs nor contract load programs provided.  From release 12.1 onwards the 'Service Contracts Import Program' is provided to load service contracts into the application. The Service Contracts Import functionality is explained in How to Use the Service Contracts Import Program - Scope and Limitations (Doc ID 1057242.1).  This note includes an attached document which explains the program architecture, shows the Entity Relationship Diagram and details the interface table definitions. The Import program takes data from the interface tables listed below and populates the contracts schema tables:  OKS_USAGE_COUNTERS_INTERFACE OKS_SALES_CREDITS_INTERFACEOKS_NOTES_INTERFACEOKS_LINES_INTERFACEOKS_HEADERS_INTERFACEOKS_COVERED_LEVELS_INTERFACEThese interface tables must be loaded via a custom load program.The Service Contracts Import concurrent request is then submitted to create contracts from this legacy data. The parameters to run the Import program are:  Parameter Description  Mode Validate only, Import  Batch Number Batch_Id (unique id populated into the OKS_HEADERS_INTERFACE table)  Number of Workers Number of workers required (these are spawned as separate sub-requests)  Commit size Represents number of successfully processed contracts commited to database The program spawns sub-requests for the import worker(s) and the 'Service Contracts Import Report'.  The data is validated prior to import and into the Contracts tables and will report errors in the Service Contracts Import Report program output file (Import Execution Report).  Troubleshooting tips are provided in R12.1 - Common Service Contract Import Errors (Doc ID 762545.1); this document lists some, but not all, import errors.  The document will be updated over time.  Additional help is given in Debugging Tip for Service Contracts Import Errors (Doc ID 971426.1).After you successfully import contracts, you can purge the records from the interface tables by running the Service Contracts Import Purge concurrent program. Note that there is no supported way to mass delete data from the Contracts schema tables once they are populated, so data loaded by the Import program must be fully tested and verified before the program is run to load data into a Production system.A Service Contracts Import Test program has been provided which will take an existing contract in the application and load the interface tables using the data from that contract.  This can be used as an example for guidance on how to load the interface tables.  The Test program functionality is explained in How to Use the Service Contracts Test Import Program Provided in Release 12.1 (Doc ID 761209.1).  Note that the Test program has some limitations which do not apply to the full Import program and is not a supported program, it is simply a testing tool.  

  Read the article

• Customizing Flowcharts in Oracle Tutor

  - by [email protected]

  Today we're going to look at how you can customize the flowcharts within Oracle Tutor procedures, and how you can share those changes with other authors within your company. Here is an image of a flowchart within a Tutor procedure with the default size and color scheme. You may want to change the size of your flowcharts as your end-users might have larger screens or need larger fonts. To change the size and number of columns, navigate to Tutor Author Author Options Flowcharts. The default is to have 4 columns appear in each flowchart, but, if I change it to six, my end-users will see a denser flowchart. This might be too dense for my end-users, so I will change it to 5 columns, and I will also deselect the option to have separate task boxes. Now let's look at how to customize the colors. Within the Flowchart options dialog, there is a button labeled "Colors." This brings up a dialog box of every object on a Tutor flowchart, and I can modify the color of each object, as well as the text within the object. If I click on the background, the "page" object appears in the Item field, and now I can customize the color and the title text by selecting Select Fill Color and/or Select Text Color. A dialog box with color choices appears. If I select Define Custom Colors, I can make my selections even more precise. Each time I change the color of an object, it appears in the selection screen. When the flowchart customization is finished, I can save my changes by naming the scheme. Although the color scheme I have chosen is rather silly looking, perhaps I want others to give me their feedback and make changes as they wish. I can share the color scheme with them by copying the FCP.INI file in the Tutor\Author directory into the same directory on their systems. If the other users have color schemes that they do not want to lose, they can copy the relevant lines from the FCP.INI file into their file. If I flowchart my document with the new scheme, I can see how it looks within the document. Sometimes just one or two changes to the default scheme are enough to customize the flowchart to your company's color palette. I have seen customers who have only changed the Start object to green and the End object to red, and I've seen another customer who changed every object to some variant of black and orange. Experiment! And let us know how you have customized your flowcharts. Mary R. Keane Senior Development Director, Oracle Tutor

  Read the article

• SSAS: Utility to check you have the correct data types and sizes in your cube definition

  - by DrJohn

  This blog describes a tool I developed which allows you to compare the data types and data sizes found in the cube’s data source view with the data types/sizes of the corresponding dimensional attribute.  Why is this important?  Well when creating named queries in a cube’s data source view, it is often necessary to use the SQL CAST or CONVERT operation to change the data type to something more appropriate for SSAS.  This is particularly important when your cube is based on an Oracle data source or using custom SQL queries rather than views in the relational database.   The problem with BIDS is that if you change the underlying SQL query, then the size of the data type in the dimension does not update automatically.  This then causes problems during deployment whereby processing the dimension fails because the data in the relational database is wider than that allowed by the dimensional attribute. In particular, if you use some string manipulation functions provided by SQL Server or Oracle in your queries, you may find that the 10 character string you expect suddenly turns into an 8,000 character monster.  For example, the SQL Server function REPLACE returns column with a width of 8,000 characters.  So if you use this function in the named query in your DSV, you will get a column width of 8,000 characters.  Although the Oracle REPLACE function is far more intelligent, the generated column size could still be way bigger than the maximum length of the data actually in the field. Now this may not be a problem when prototyping, but in your production cubes you really should clean up this kind of thing as these massive strings will add to processing times and storage space. Similarly, you do not want to forget to change the size of the dimension attribute if your database columns increase in size. Introducing CheckCubeDataTypes Utiltity The CheckCubeDataTypes application extracts all the data types and data sizes for all attributes in the cube and compares them to the data types and data sizes in the cube’s data source view.  It then generates an Excel CSV file which contains all this metadata along with a flag indicating if there is a mismatch between the DSV and the dimensional attribute.  Note that the app not only checks all the attribute keys but also the name and value columns for each attribute. Another benefit of having the metadata held in a CSV text file format is that you can place the file under source code control.  This allows you to compare the metadata of the previous cube release with your new release to highlight problems introduced by new development. You can download the C# source code from here: CheckCubeDataTypes.zip A typical example of the output Excel CSV file is shown below - note that the last column shows a data size mismatch by TRUE appearing in the column

  Read the article

• Why learn Flash Builder 4 (Flex) when I can just use Flash Professional?

  - by Jason McKenna

  I want to learn Flash Builder 4 (Flex) because I see sooo many jobs requesting experience with it. i also just like knowing stuff. I am also very interested in focusing on RIA development now. BUT... can anyone tell me CLEARLY why the heck I would ever use FLEX over Flash Pro?? it is a time investment, so is it worth it? All I read are misguided posts about how Flash Pro is for games and banner ads, and Flex is for programmers and RIAs blah blah... this simply isn't so from my 9 years of contracting experience. I'm 99.9% certain that I can build anything a flex developer can build, but using Flash Pro. I can build powerful AS3-driven apps for the desktop, mobile device, or browser, and I can link to databases with XML and I can import text files and communicate with ColdFusion and everything. The advantage with Flash Pro is that I can also easily and clearly animate transitions and build custom elements that look the way I want/need them to look for my specific client. Why would I want to use a bunch of pre-built components that drive my file sizes to the moon?? Who is happy with a drag-n-drop button?? Is Flex just a thing made for programmer people with no artistic inclination? What is the advantage of using it?? It takes me back to Visual Basic class. Seems like a pain to have to use multiple tools to import crap from Flash Pro into Flex and yada yada... why when I can do it all nicely in Flash Pro to begin with. Am I clueless, or missing some major piece of the puzzle? Thanks for any clarity. PS, I couldn't care less about the code editors. It aint that bad people. They make it out like the thing doesn't even respond to keyboard input or something. Does everthing I need it do anyways. Please help out here. If I just dont need to learn it, I dont want to waste the time. Jase

  Read the article

• Announcement: Employee Info Starter Kit (v6.0–ASP.NET MVC Edition) is Released

  - by Mohammad Ashraful Alam

  Originally posted on: http://geekswithblogs.net/joycsharp/archive/2013/06/16/announcement-employee-info-starter-kit-v6.0asp.net-mvc-edition-is-released.aspxAfter a long wait, the next version of Employee Info Starter Kit is released! This starter kit is basically a project template that contains code samples targeting a specific technology, such as ASP.NET Web Form, ASP.NET MVC etc. Since its first release, this open source project gained a huge popularity in the developer community and had 250K+ combined downloads. This starter kit is honored to be placed at the official ASP.NET site, along with other asp.net starter kits, which all are being considered as the “best” ASP.NET coding standards, recommended by Microsoft. EISK is showcased in Microsoft’s Channel 9’s Weekly Show, as well. The ASP.NET MVC Edition of the new version 6.0 bundles most of the greatest and successful platforms, frameworks and technologies together, to enable web developers to learn and build manageable and high performance web applications with rich user experience effectively and quickly. User End Specifications Creating a new employee record Read existing employee records Update an existing employee record Delete existing employee records Role based security model Key Technology Areas ASP.NET MVC 4 Entity Framework 4.3.1 Sql Server Compact Edition 4 Visual Studio 2012 QuickStart Guide Getting started with EISK 6.0 ASP.NET is pretty easy. Once you've Visual Studio 2012 installed, then just follow the steps as provided below: Download the EISK 6.0 MVC version. Extract the file. From the extracted folder, click the solution file "Eisk.MVC-VS2012.sln". Right click the "Eisk.MVC" project node and select "Select set as StartUp Project". Hit Ctrl+F5 and explore! Architectural Overview Overall architecture is based on Model-View-Controller pattern Support for desktop & mobile browsers. Usage of Domain Model, Repository and Unit of Work pattern from Domain Driven Development approach Usage of Data Annotations in model (entity) classes to centralize basic validation mechanism that facilitates DRY principle Usage of IValidatableObject interface in model (entity) classes that isolates custom business logic from application layer Usage of OOP inheritance and Value Object pattern in model (entity) classes that provides reusability in application architecture Usage of View Model, Editor Model pattern that provides mechanism for testable view rendering logic Several helper classes and extension methods to enable developers build application with reduced code If you want to learn more about it in details, just check the following links: Getting Started - Hands on Coding Walkthrough – Technology Stack - Design & Architecture Enjoy!

  Read the article

• Oracle Utilities Application Framework V4.2.0.0.0 Released

  - by ACShorten

  The Oracle Utilities Application Framework V4.2.0.0.0 has been released with Oracle Utilities Customer Care And Billing V2.4. This release includes new functionality and updates to existing functionality and will be progressively released across the Oracle Utilities applications. The release is quite substantial with lots of new and exciting changes. The release notes shipped with the product includes a summary of the changes implemented in V4.2.0.0.0. They include the following: Configuration Migration Assistant (CMA) - A new data management capability to allow you to export and import Configuration Data from one environment to another with support for Approval/Rejection of individual changes. Database Connection Tagging - Additional tags have been added to the database connection to allow database administrators, Oracle Enterprise Manager and other Oracle technology the ability to monitor and use individual database connection information. Native Support for Oracle WebLogic - In the past the Oracle Utilities Application Framework used Oracle WebLogic in embedded mode, and now, to support advanced configuration and the ExaLogic platform, we are adding Native Support for Oracle WebLogic as configuration option. Native Web Services Support - In the past the Oracle Utilities Application Framework supplied a servlet to handle Web Services calls and now we offer an alternative to use the native Web Services capability of Oracle WebLogic. This allows for enhanced clustering, a greater level of Web Service standards support, enchanced security options and the ability to use the Web Services management capabilities in Oracle WebLogic to implement higher levels of management including defining additional security rules to control access to individual Web Services. XML Data Type Support - Oracle Utilities Application Framework now allows implementors to define XML Data types used in Oracle in the definition of custom objects to take advantage of XQuery and other XML features. Fuzzy Operator Support - Oracle Utilities Application Framework supports the use of the fuzzy operator in conjunction with Oracle Text to take advantage of the fuzzy searching capabilities within the database. Global Batch View - A new JMX based API has been implemented to allow JSR120 compliant consoles the ability to view batch execution across all threadpools in the Coherence based Named Cache Cluster. Portal Personalization - It is now possible to store the runtime customizations of query zones such as preferred sorting, field order and filters to reuse as personal preferences each time that zone is used. These are just the major changes and there are quite a few more that have been delivered (and more to come in the service packs!!). Over the next few weeks we will be publishing new whitepapers and new entries in this blog outlining new facilities that you want to take advantage of.

  Read the article

• Filtering option list values based on security in UCM

  - by kyle.hatlestad

  Fellow UCM blog writer John Sim recently posted a comment asking about filtering values based on the user's security. I had never dug into that detail before, but thought I would take a look. It ended up being tricker then I originally thought and required a bit of insider knowledge, so I thought I would share. The first step is to create the option list table in Configuration Manager. You want to define the column for the option list value and any other columns desired. You then want to have a column which will store the security attribute to apply to the option list value. In this example, we'll name the column 'dGroupName'. Next step is to create a View based on the new table. For the Internal and Visible column, you can select the option list column name. Then click on the Security tab, uncheck the 'Publish view data' checkbox and select the 'Use standard document security' radio button. Click on the 'Edit Values...' button and add the values for the option list. In the dGroupName field, enter the Security Group (or Account if you use Accounts for security) to apply to that value. Create the custom metadata field and apply the View just created. The next step requires file system access to the server. Open the file [ucm directory]\data\schema\views\[view name].hda in a text editor. Below the line '@Properties LocalData', add the line: schSecurityImplementorColumnMap=dGroupName:dSecurityGroup The 'dGroupName' value designates the column in the table which stores the security value. 'dSecurityGroup' indicates the type of security to check against. It would be 'dDocAccount' if using Accounts. Save the file and restart UCM. Now when a user goes to the check-in page, they will only see the options for which they have read and write privileges to the associated Security Group. And on the Search page, they will see the options for which they have just read access. One thing to note is if a value that a user normally can't view on Check-in or Search is applied to a document, but the document is viewable by the user, the user will be able to see the value on the Content Information screen.

  Read the article

< Previous Page | 489 490 491 492 493 494 495 496 497 498 499 500  | Next Page >