Search Results

Search found 13859 results on 555 pages for 'non functional'.

Page 493/555 | < Previous Page | 489 490 491 492 493 494 495 496 497 498 499 500  | Next Page >

  • All downloads being interrupted

    - by Jake
    System: Windows 7 Professional 64bit. 8GB RAM, Intel i5-2400 CPU, +300GB free on the hard drive. AVG Internet Security 2012 (enabled & disabled, with firewall enabled and disabled - no effect for either). This computer is less than a year old. Network: This problem is occurring on a single computer on a network with multiple computers. The router is a Motorola Netopia 3347-02 (DSL Modem/Wireless Router combined). The computer is plugged in directly to the modem, other computers are using the wireless successfully. The router has been reset. The only thing odd about the connection between the router and computer is that it is configured to allow RDP through, so it is assigned a static IP by the router and port forwarding is enabled for port 3389. Also, though I doubt it matters, a second wireless router is active behind this router providing a second network that some computers in the area use without issues. Details: All downloads initiated on this specific computer eventually fail, this includes streaming from youtube, specialized downloads (itunes), downloads from websites, FTP downloads, etc. Failure occurs with all browsers, but in chrome this is the process it takes: 1) Download begins normally, 2) At some point between (observed) 7MBs and 229MBs the download stops progressing (at this point, if watching chrome's task manager, you can see the network activity for the downloading tab drop to 0kps), 3) for some time the download sits there still attempting to complete, but will eventually display "123,049,871/0 B, Interrupted" (where the number is whatever it actually got to). The file I am using to test this is a very large .zip file located on a server I control, but the problem seems to occur on any site. The amount downloaded is completely random, and seems to be more time-based than anything (if I start a download immediately after the last one fails, it tends to get further than the last one). Small files can get through for this reason, though they can fail as well. In a test where I simultaneously downloaded the same file via HTTP (chrome) and FTP (windows explorer), both downloads failed at the same instant, though explorer displayed "Connection timed out" several minutes before chrome finally showed the download as interrupted. Other things I have tried based on advice given to people with similar/identical problems: Setting my MTU to 1492 (as described here: http://blog.thecompwiz.com/2011/08/networking-issues.html) Disabling write caching to the hard drive storing the download on an external device successfully transmitted +1GB file from one computer on the same network to this computer disabling indexing in the folder the download was being stored in disabling all security software checked to make sure all drivers were up to date read about 50 accounts with nearly exact descriptions of what I'm experiencing, none of which had a solution given Running Processes: Image Name PID Session Name Session# Mem Usage ========================= ======== ================ =========== ============ System Idle Process 0 Services 0 24 K System 4 Services 0 104,836 K smss.exe 332 Services 0 1,276 K csrss.exe 764 Services 0 5,060 K wininit.exe 820 Services 0 4,748 K csrss.exe 844 Console 1 23,764 K services.exe 876 Services 0 11,856 K lsass.exe 892 Services 0 14,420 K lsm.exe 900 Services 0 7,820 K winlogon.exe 944 Console 1 7,716 K svchost.exe 428 Services 0 12,744 K svchost.exe 796 Services 0 12,240 K svchost.exe 1036 Services 0 22,372 K svchost.exe 1084 Services 0 174,132 K svchost.exe 1112 Services 0 56,144 K svchost.exe 1288 Services 0 18,640 K svchost.exe 1404 Services 0 29,616 K spoolsv.exe 1576 Services 0 25,924 K svchost.exe 1616 Services 0 12,788 K AppleMobileDeviceService. 1728 Services 0 9,796 K avgwdsvc.exe 1820 Services 0 8,268 K mDNSResponder.exe 1844 Services 0 5,832 K w3dbsmgr.exe 1108 Services 0 43,760 K QBCFMonitorService.exe 1336 Services 0 16,408 K svchost.exe 2404 Services 0 28,240 K taskhost.exe 3020 Console 1 12,372 K dwm.exe 2280 Console 1 5,968 K explorer.exe 2964 Console 1 152,476 K WUDFHost.exe 3316 Services 0 6,740 K svchost.exe 3408 Services 0 5,556 K RAVCpl64.exe 3684 Console 1 13,864 K igfxtray.exe 3700 Console 1 7,804 K hkcmd.exe 3772 Console 1 7,868 K igfxpers.exe 3788 Console 1 10,940 K sidebar.exe 3836 Console 1 84,400 K chrome.exe 3964 Console 1 19,640 K pptd40nt.exe 4068 Console 1 5,156 K acrotray.exe 3908 Console 1 14,676 K avgtray.exe 3872 Console 1 9,508 K jusched.exe 4076 Console 1 4,412 K iTunesHelper.exe 1532 Console 1 87,308 K SearchIndexer.exe 3492 Services 0 36,948 K iPodService.exe 4136 Services 0 7,944 K BrccMCtl.exe 4276 Console 1 18,132 K splwow64.exe 4380 Console 1 32,600 K qbupdate.exe 4836 Console 1 24,236 K svchost.exe 4288 Services 0 20,700 K wmpnetwk.exe 3112 Services 0 9,516 K FNPLicensingService.exe 5248 Services 0 5,852 K QBW32.EXE 5508 Console 1 127,068 K QBDBMgrN.exe 5600 Services 0 42,252 K EXCEL.EXE 2512 Console 1 99,100 K LMS.exe 3188 Services 0 5,616 K UNS.exe 1600 Services 0 7,308 K axlbridge.exe 5260 Console 1 5,132 K chrome.exe 5888 Console 1 200,336 K chrome.exe 3536 Console 1 26,076 K chrome.exe 1952 Console 1 20,168 K chrome.exe 4596 Console 1 24,696 K chrome.exe 4292 Console 1 48,096 K chrome.exe 2796 Console 1 23,520 K Acrobat.exe 1240 Console 1 87,252 K 123w.exe 4892 Console 1 22,728 K calc.exe 1700 Console 1 12,636 K chrome.exe 1328 Console 1 28,888 K chrome.exe 3696 Console 1 47,012 K rundll32.exe 6320 Console 1 7,104 K chrome.exe 4928 Console 1 44,248 K AVGIDSAgent.exe 260 Services 0 12,940 K avgfws.exe 6052 Services 0 26,912 K avgnsa.exe 5064 Services 0 2,496 K avgrsa.exe 3088 Services 0 2,200 K avgcsrva.exe 2596 Services 0 380 K avgcsrva.exe 6948 Services 0 408 K StikyNot.exe 452 Console 1 14,772 K chrome.exe 4580 Console 1 28,200 K chrome.exe 4016 Console 1 57,756 K svchost.exe 7140 Services 0 4,500 K chrome.exe 6264 Console 1 56,824 K chrome.exe 7008 Console 1 56,896 K chrome.exe 2224 Console 1 38,032 K taskhost.exe 612 Console 1 7,228 K chrome.exe 6000 Console 1 10,928 K chrome.exe 2568 Console 1 43,052 K chrome.exe 272 Console 1 75,988 K chrome.exe 7328 Console 1 53,240 K PaprPort.exe 7976 Console 1 137,152 K pplinks.exe 7500 Console 1 14,052 K ppscanmg.exe 5744 Console 1 18,996 K taskeng.exe 7388 Console 1 6,308 K SearchProtocolHost.exe 8024 Services 0 8,804 K SearchFilterHost.exe 7232 Services 0 7,848 K chrome.exe 8016 Console 1 37,440 K cmd.exe 7692 Console 1 3,096 K conhost.exe 7516 Console 1 5,872 K tasklist.exe 8160 Console 1 5,772 K WmiPrvSE.exe 7684 Services 0 6,400 K Any help with this would be greatly appreciated, I've been beating my head against a wall over this all day. This computer serves dual purpose as the main company document server and the Owner's work computer, it's fairly important it be fully functional and I cannot figure this out.

    Read the article

  • Linux Mint Wireless doesn't connect

    - by guisantogui
    I'm having a great problem, I've installed Linux mint debian edition (LMDE), and following this tutorial http://community.linuxmint.com/tutorial/view/161 I did installed the network driver. The available connections appears to me, but when i try to connect to my connection at first time, I got this message: "(4) Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." And the following tries, I got this another message: "(32) Insufficient privileges." I'm accepting ideas. Thanks. EDIT: The last piece of the logs: Oct 5 00:22:38 gsouza-host ntpd[2116]: peers refreshed Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <info> (wlan0): bringing up device. Oct 5 00:22:42 gsouza-host wpa_supplicant[2055]: nl80211: 'nl80211' generic netlink not found Oct 5 00:22:42 gsouza-host wpa_supplicant[2055]: Failed to initialize driver 'nl80211' Oct 5 00:22:42 gsouza-host wpa_supplicant[2055]: rfkill: WLAN soft blocked Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <info> WiFi hardware radio set enabled Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <info> WiFi now enabled by radio killswitch Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <info> (wlan0): supplicant interface state: starting -> ready Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42] Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <info> (wlan0): supplicant interface state: ready -> inactive Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <warn> Trying to remove a non-existant call id. Oct 5 00:22:42 gsouza-host wpa_supplicant[2055]: rfkill: WLAN unblocked Oct 5 00:22:44 gsouza-host avahi-daemon[1827]: Joining mDNS multicast group on interface wlan0.IPv6 with address fe80::7ae4:ff:fe4a:13a9. Oct 5 00:22:44 gsouza-host avahi-daemon[1827]: New relevant interface wlan0.IPv6 for mDNS. Oct 5 00:22:44 gsouza-host avahi-daemon[1827]: Registering new address record for fe80::7ae4:ff:fe4a:13a9 on wlan0.*. Oct 5 00:22:46 gsouza-host ntpd[2116]: Listen normally on 7 wlan0 fe80::7ae4:ff:fe4a:13a9 UDP 123 Oct 5 00:22:46 gsouza-host ntpd[2116]: peers refreshed

    Read the article

  • UNIX - mount: only root can do that

    - by Travesty3
    I need to allow a non-root user to mount/unmount a device. I am a total noob when it comes to UNIX, so please dumb it down for me. I've been looking all over teh interwebz to find an answer and it seems everyone is giving the same one, which is to modify /etc/fstab to include that device with the 'user' option (or 'users', tried both). Cool, well I did that and it still says "mount: only root can do that". Here are the contents of my fstab: # /etc/fstab: static file system information. # # Use 'vol_id --uuid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc defaults 0 0 # / was on /dev/mapper/minicc-root during installation UUID=1a69f02a-a049-4411-8c57-ff4ebd8bb933 / ext3 relatime,errors=remount-ro 0 1 # /boot was on /dev/sda5 during installation UUID=038498fe-1267-44c4-8788-e1354d71faf5 /boot ext2 relatime 0 2 # swap was on /dev/mapper/minicc-swap_1 during installation UUID=0bb583aa-84a8-43ef-98c4-c6cb25d20715 none swap sw 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0 /dev/scd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 /dev/sdb1 /mnt/sdcard auto auto,user,rw,exec 0 0 My thumb drive partition shows up as /dev/sdb1. I'm pretty sure my fstab is set up OK, but everyone on the other posts seems to fail to mention how they actually call the 'mount' command once this entry is in the fstab file. I think this is where my problem may be. The command I use to mount the drive is: $ mount /dev/sdb1 /mnt/sdcard. /bin/mount is owned by root and is in the root group and has 4755 permissions. /bin/umount is owned by root and is in the root group and has 4755 permissions. /mnt/sdcard is owned by me and is in one of my groups and has 0755 permissions. My mount command works fine if I use sudo, but I need to be able to do this without sudo (need to be able to do it from a PHP script using shell_exec). Any suggestions? Sorry for making you read so much...just trying to get as much info in the initial post as possible to preemptively answer questions about configuration stuff. If I missed anything tho, ask away. Thanks! -Travis

    Read the article

  • dnsmasq acts as the DHCP server for selected nodes overriding the existing DHCP server on the same LAN?

    - by user183394
    I am trying to set up a small "lab" at home. Like many modern homes, I have a regular DSL service which comes with a 2Wire 3600HGV router, which acts also as a DHCP server. Since I would like to PXE boot a few computers in my "lab" The 2Wire is inflexible to adjustments that I want to do I have used dnsmasq at work so I would like to use dnsmasq as the DHCP server for the few nodes in my "lab" if feasible. In the dnsmasq man page, there is the following: [...] -K, --dhcp-authoritative (IPv4 only) Should be set when dnsmasq is definitely the only DHCP server on a network. It changes the behaviour from strict RFC compliance so that DHCP requests on unknown leases from unknown hosts are not ignored. This allows new hosts to get a lease without a tedious timeout under all circumstances. It also allows dnsmasq to rebuild its lease database without each client needing to reacquire a lease, if the database is lost. [...] As far as I know, the ISC DHCP server can use the following to do what I would like to accomplish: authoritative; [...] subnet 192.168.1.0 netmask 255.255.255.0 { host nb0 { # only give DHCP information to this computer: hardware ethernet e8:9a:8f:17:70:42; fixed-address 192.168.1.10; option subnet-mask 255.255.255.0; option routers 192.168.1.254; option domain-name-servers 192.168.1.254; # Non-essential DHCP options filename "/pxelinux.0"; } [...] But I much prefer dnsmasq's "all-in-one-ness". My question: do I have to couple the -K option with something else? As shown in the example above, the ISC DHCP server requires the mac addresses of managed nodes to be explicitly specified. Does dnsmasq have something similar? FYI, the machine on which I plan to run dnsmasq runs CentOS 6.3 64bit. It has a statically assigned IP address: 192.168.1.3.

    Read the article

  • Why is user asked to choose their workgroup?

    - by Clinton Blackmore
    We running Mac OS X Server 10.5.8 with Mac OS X 10.5.8 clients. Students use network logins to, well, log in. I've been asked to deny internet access to a specific user. I was told that a good way to do it is to create a user workgroup called "No Internet Access" and manage settings there. (Specifically, I told parental controls to allow access to no sites, and blacklisted all the installed web browsers). Now, when the user authenticates to log in, they are greeted with this dialog: Workgroups for <username> Grade 7 Students No Internet Access It is unlikely that the student would willing choose "No Internet Access" to be their base group. Looking in Workgroup Manager at the student's record, it shows their primary group ID is the grade 7 group, and "No Internet Access" is listed as another group they belong to. I looked at the managed preferences for all the computers pertaining to logins. They are set to their defaults. Specifically, the computer groups' preference for Logins - Access has the defaults: [unchecked] Ignore workgroup nesting [checked] Combine available workgroup settings Based on my reading of Tips and Tricks for Mac Administrators, this should be correct, the user should not be asked which group they belong to, and settings from all applicable groups should be applied. How can I achieve that result? Edit: I've decided to add some additional information from the Tips and Tricks for Mac Management White Paper (via Apple in Education, via the author's site). On page 21, it says: With Leopard MCX, workgroup preference settings are combined by default into a single set of values. This means that instead of having to choose between the Math, Science, or Language Arts workgroups when logging in, a user can just authenticate and be taken directly to the desktop. All the settings for each of those workgroups are composited together, providing you with all the Dock items and a composite of all the other settings. On page 40, an example is given in which settings are combined from different 'domains', one computer group, two (user) workgroups, and one individual user's settings. [When johnd logs into a leopard client,] the items staged in the Dock from left to right are: computer group, first workgroup alphabetically, second workgroup, user. Items within the workgroup are staged alphabetically. Nowhere is there an indication that groups are nested; indeed, I can see no sensible (non-flat) heirarchy for groups like Math, Science, and Language Arts. I strongly believe that there is a way to apply settings from two unrelated user workgroups such that a user of OS X 10.5.x or newer does not need to choose their workgroup. This is what I seek to achieve.

    Read the article

  • Issues with Server 2012 using DFSR running on Hyper-V 2012

    - by Bryan
    We have a number of Server 2012 systems, all of which run virtualised on Hyper-V 2012 server. We are having problems with two such virtual instances, both of which are used as file servers, whereby they occasionally stop responding to requests to serve files to clients. After logging on to the server, attempts to shut it down gracefully fail (no error, it just fails to acknowledge a shutdown request). Recovery is a case of power cycling the server(s) from the Hyper-V console. These two servers don't server a large number of users (one serves no more than 6 users, and the other serves around 20 users), they are in the same domain, but on different physical hardware (and at different sites). They don't lock up at the same time. They both use DFSR to replicate a fairly large amount of data between themselves (200GB) over ADSL connections, this is working fine, and we have been using DFSR to do this on the previous two generations of server OS we have used (Server 2008 R2 and Server 2003 - both of which were physical installs however). Today, when one of the servers crashed, I noticed an entry in the event log, which looked similar to the following: Log Name: Application Source: ESENT Date: 27/11/2012 10:25:55 Event ID: 533 Task Category: General Level: Warning Keywords: Classic User: N/A Computer: HAL-FS-01.example.com Description: DFSRs (1500) \\.\E:\System Volume Information\DFSR\database_C8CC_101_CC00_EC0E\ dfsr.db: A request to write to the file "\\.\E:\System Volume Information\ DFSR\database_C8CC_101_CC00_EC0E\fsr.log" at offset 4423680 (0x0000000000438000) for 4096 (0x00001000) bytes has not completed for 36 second(s). This problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem. When the server started up again, I went to find the event log entry to investigate further and found that the event log entry was no longer there (I assume it was in memory but failed to write to disk before the server was powered off, for the reason mentioned in the message). I found the above message by searching back further in the event log. Both of these virtual servers have their E: volumes fully allocated as opposed to dynamically expanding, and there are no other issues on any of the other virtual servers (which include server 2012, server 2008 R2 and Ubuntu 12.04 x64). There are no signs of IO, memory or CPU starvation on the host systems. I've used performance counters on the affected virtual servers to monitor memory usage (including non paged pool usage), as well as CPU and network utilisation, and none of these show any signs of trouble when the issue arises. I would have thought our configuration isn't that uncommon, so I'm wondering if anyone else has seen this, and managed to resolve the problem?

    Read the article

  • Authenticating Apache HTTPd against multiple LDAP servers with expired accounts

    - by Brian Bassett
    We're using mod_authnz_ldap and mod_authn_alias in Apache 2.2.9 (as shipped in Debian 5.0, 2.2.9-10+lenny7) to authenticate against multiple Active Directory domains for hosting a Subversion repository. Our current configuration is: # Turn up logging LogLevel debug # Define authentication providers <AuthnProviderAlias ldap alpha> AuthLDAPBindDN "CN=Subversion,OU=Service Accounts,O=Alpha" AuthLDAPBindPassword [[REDACTED]] AuthLDAPURL ldap://dc01.alpha:3268/?sAMAccountName?sub? </AuthnProviderAlias> <AuthnProviderAlias ldap beta> AuthLDAPBindDN "CN=LDAPAuth,OU=Service Accounts,O=Beta" AuthLDAPBindPassword [[REDACTED]] AuthLDAPURL ldap://ldap.beta:3268/?sAMAccountName?sub? </AuthnProviderAlias> # Subversion Repository <Location /svn> DAV svn SVNPath /opt/svn/repo AuthName "Subversion" AuthType Basic AuthBasicProvider alpha beta AuthzLDAPAuthoritative off AuthzSVNAccessFile /opt/svn/authz require valid-user </Location> We're encountering issues with users that have accounts in both Alpha and Beta, especially when their accounts in Alpha are expired (but still present; company policy is that the accounts live on for at a minimum of 1 year). For example, when the user x (which has en expired account in Alpha, and a valid account in Beta), the Apache error log reports the following: [Tue May 11 13:42:07 2010] [debug] mod_authnz_ldap.c(377): [client 10.1.1.104] [14817] auth_ldap authenticate: using URL ldap://dc01.alpha:3268/?sAMAccountName?sub? [Tue May 11 13:42:08 2010] [warn] [client 10.1.1.104] [14817] auth_ldap authenticate: user x authentication failed; URI /svn/ [ldap_simple_bind_s() to check user credentials failed][Invalid credentials] [Tue May 11 13:42:08 2010] [error] [client 10.1.1.104] user x: authentication failure for "/svn/": Password Mismatch [Tue May 11 13:42:08 2010] [debug] mod_deflate.c(615): [client 10.1.1.104] Zlib: Compressed 527 to 359 : URL /svn/ Attempting to authenticate as a non-existant user (nobodycool) results in the correct behavior of querying both LDAP servers: [Tue May 11 13:42:40 2010] [debug] mod_authnz_ldap.c(377): [client 10.1.1.104] [14815] auth_ldap authenticate: using URL ldap://dc01.alpha:3268/?sAMAccountName?sub? [Tue May 11 13:42:40 2010] [warn] [client 10.1.1.104] [14815] auth_ldap authenticate: user nobodycool authentication failed; URI /svn/ [User not found][No such object] [Tue May 11 13:42:40 2010] [debug] mod_authnz_ldap.c(377): [client 10.1.1.104] [14815] auth_ldap authenticate: using URL ldap://ldap.beta:3268/?sAMAccountName?sub? [Tue May 11 13:42:44 2010] [warn] [client 10.1.1.104] [14815] auth_ldap authenticate: user nobodycool authentication failed; URI /svn/ [User not found][No such object] [Tue May 11 13:42:44 2010] [error] [client 10.1.1.104] user nobodycool not found: /svn/ [Tue May 11 13:42:44 2010] [debug] mod_deflate.c(615): [client 10.1.1.104] Zlib: Compressed 527 to 359 : URL /svn/ How do I configure Apache to correctly query Beta if it encounters an expired account in Alpha?

    Read the article

  • Cannot login to SQL Server 2008 R2 with Windows authentication

    - by Ian Boyd
    When i try to connect to SQL Server (2008 R2) using Windows authentication: i cannot: Checking the Windows Application event log, i find the error: Login failed for user 'AVATOPIA\ian'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: ] Log Name: Application Source: MSSQLSERVER Event ID: 18456 Level: Information User: AVATOPIA\ian OpCode: Task Category: Logon i can login to the computer itself using Windows authentication. i can log into SQL Server using the local Windows Administrator account. We can connect to 8 other SQL Servers on the domain using Windows Authentication. Just this one, whitch is the only one that is 2008 R2 is failing. So i assume it's a bug with *2008 R2. Note: i cannot logon locally, or remotely, using Windows authentication. i can login locally and remotely using SQL Server Authentication. Update Note: It's not limited to SQL Server Management Studio, standalone applications that connect using Windows authentication: fail: Note: It's not a client problem, as we can connect fine to other (non-SQL Server 2008 R2 machines): i'm sure there's a technote or knowledge base article describing why SQL Server 2008 R2 is broken by default, but i can't find it. Update 2 Matt figure out the change that Microsoft made so that SQL Server 2008 R2 is broken by default: Administrators are no longer administrators All that remains is to figure out how to make Administrators administrators. One of these days i'm going to start a list of changes around Microsoft's "broken by default" initiative. Steps to reproduce the problem How do i add a group to the sysadmin fixed server role? Here's the steps i try, that don't work: Click Add: Click Object Types: Ensure that you have no ability to add groups: and click OK. Under Enter the object names to select, enter Administrators: Click Check Names, and ensure that you are not allowed to add groups: and click Cancel. Click Browse..., and ensure that you have no ability to add groups: You should now still not have added any group to the sysadmin role. Additional information SQL Server Management Studio is being run as an administrator: SQL Server is set to use Windows Authentication: tried while logged into SQL with both sa and the only other sysadmin domain account (screenshot can be supplied for those who don't believe)

    Read the article

  • Postfix not delivering email using Maildir

    - by Greg K
    I've followed this guide to get postfix set up. I've not completed it yet, as from sending test emails, email is no longer being delivered since switching to Maildir from mbox. I have created a Maildir directory with cur, new and tmp sub directories. ~$ ll drwxrwxr-x 5 greg greg 4096 2012-07-07 16:40 Maildir/ ~$ ll Maildir/ drwxrwxr-x 2 greg greg 4096 2012-07-07 16:40 cur drwxrwxr-x 2 greg greg 4096 2012-07-07 16:40 new drwxrwxr-x 2 greg greg 4096 2012-07-07 16:40 tmp Send a test email. ~$ netcat mail.example.com 25 220 ubuntu ESMTP Postfix (Ubuntu) ehlo example.com 250-ubuntu 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN mail from: [email protected] 250 2.1.0 Ok rcpt to: [email protected] 250 2.1.5 Ok data 354 End data with <CR><LF>.<CR><LF> Subject: test email Hi, Just testing. . 250 2.0.0 Ok: queued as 56B541EA53 quit 221 2.0.0 Bye Check the mail queue. ~$ mailq Mail queue is empty Check if mail has been delivered. ~$ ls -l Maildir/new total 0 Some postfix settings: ~$ sudo postconf home_mailbox home_mailbox = Maildir/ ~$ sudo postconf mailbox_command mailbox_command = /var/log/mail.log Jul 7 16:57:33 li305-246 postfix/smtpd[21039]: connect from example.com[178.79.168.xxx] Jul 7 16:58:14 li305-246 postfix/smtpd[21039]: 56B541EA53: client=example.com[178.79.168.xxx] Jul 7 16:58:33 li305-246 postfix/cleanup[21042]: 56B541EA53: message-id=<20120707155814.56B541EA53@ubuntu> Jul 7 16:58:33 li305-246 postfix/qmgr[20882]: 56B541EA53: from=<[email protected]>, size=321, nrcpt=1 (queue active) Jul 7 16:58:33 li305-246 postfix/smtp[21043]: 56B541EA53: to=<[email protected]>, relay=none, delay=30, delays=30/0.01/0/0, dsn=5.4.6, status=bounced (mail for example.com loops back to myself) Jul 7 16:58:33 li305-246 postfix/cleanup[21042]: 1F68B1EA55: message-id=<20120707155833.1F68B1EA55@ubuntu> Jul 7 16:58:33 li305-246 postfix/bounce[21044]: 56B541EA53: sender non-delivery notification: 1F68B1EA55 Jul 7 16:58:33 li305-246 postfix/qmgr[20882]: 1F68B1EA55: from=<>, size=1999, nrcpt=1 (queue active) Jul 7 16:58:33 li305-246 postfix/qmgr[20882]: 56B541EA53: removed Jul 7 16:58:33 li305-246 postfix/smtp[21043]: 1F68B1EA55: to=<[email protected]>, relay=none, delay=0, delays=0/0/0/0, dsn=5.4.6, status=bounced (mail for example.com loops back to myself) Jul 7 16:58:33 li305-246 postfix/qmgr[20882]: 1F68B1EA55: removed Jul 7 16:58:36 li305-246 postfix/smtpd[21039]: disconnect from domain.me[178.79.168.xxx] Jul 7 17:10:38 li305-246 postfix/master[20878]: terminating on signal 15 Jul 7 17:10:39 li305-246 postfix/master[21254]: daemon started -- version 2.8.5, configuration /etc/postfix Any ideas?

    Read the article

  • SMTP authentication error using PHPMailer

    - by Javier
    I am using PHPMailer to send a basic form to an email address but I get the following error: SMTP Error: Could not authenticate. Message could not be sent. Mailer Error: SMTP Error: Could not authenticate. SMTP server error: VXNlcm5hbWU6 The weird thing is that if I try to send it again, IT WORKS! Every time I submit the form after that first error it works. But if I leave it for a few minutes and then try again I get the same error again. The username and password have to be right as sometimes it works fine. I even created the following (very basic) script just to test it and I got the same result <?php require("phpmailer/class.phpmailer.php"); $mail = new PHPMailer(); $mail->IsSMTP(); $mail->Host = "smtp.host.com"; $mail->SMTPAuth = true; $mail->Username = "[email protected]"; $mail->Password = "password"; $mail->From = "[email protected]"; $mail->FromName = "From Name"; $mail->AddAddress("[email protected]"); $mail->AddReplyTo("[email protected]"); $mail->IsHTML(true); $mail->Subject = "Here is the subject"; $mail->Body = "This is the HTML message body <b>in bold!</b>"; $mail->AltBody = "This is the body in plain text for non-HTML mail clients"; if(!$mail->Send()) { echo "Message could not be sent. <p>"; echo "Mailer Error: " . $mail->ErrorInfo; exit; } echo "Message has been sent"; ?> I don't think this is relevant, but I just changed my hosting to a Linux shared server. Any idea why this is happening? Thanks! ***UPDATED 02/06/2012 I've been doing some tests. The results: I tested the script in an IIS server and it worked fine. The error seems to happen only in the Linux server. Also, if I use the gmail mail server it works fine in both, IIS and Linux. Could it be a problem with the configuration of my Linux server??

    Read the article

  • OS X Snow Leopard 10.6 Refuses to Load Websites the first time intermittently

    - by Brandon
    Many times when I am browsing the web, Snow Leopard will sit and load a site for 20 seconds or more, until it times out and says it cannot be displayed. If I refresh, it loads RIGHT away, every time. The issue is intermittent but happens from once every couple of days to a few times a day. So the long and short of it is this: Aluminum MacBook (Non-Pro) 2.4GHz Core2Duo, 4GB DDR3 I am using 10.6.6 but I have had this issue since 10.6.0 It happens in Firefox, Chrome, and Safari I have flushed my DNS (using the command 'blablabla flush') I am using custom DNS servers which I hoped would fix it but it had no effect* I am running Apache currently but haven't been for most of the time I've reformatted multiple times, always experiencing the issue I am on Cox cable internet, with a Motorola Surfboard & a Belkin F6D4230-4 v1 (Pre?) N wireless router. I've put the router in G only & N only & G+N to no effect It seems to be domain dependant as I can sometimes load the Google cache right away, and sometimes other sites will load but Google will refuse My Powerbook G4 with Leopard, other Windows XP laptops, & my wired Win7 desktop do not suffer from the issue. *I recently started using these to escape the awful Cox redirect page on timeouts I'm almost positive the issue has happened on other networks but I can't recall a specific instance (I have a terrible memory). The problem is intermittent and fixable enough (I just have to wait until it times out and hit refresh one time) but incredibly annoying since I'm constantly reading documentation from a large variety of sites. EDIT: To clarify, this happens with ALL sites, not only specific sites. I haven't been able to detect any pattern to the failures, but one day Google.com will refuse to load while reddit.com will, and the next day vice versa. Keep in mind that waiting for a timeout and hitting refresh loads the page right away, every time. If I don't wait for the timeout, opening more links, hitting refresh, and clicking the link a billion times have no effect. It seems to be domain neutral, affecting sites seemingly at random. It doesn't seem to have anything to do with connection inactivity either, because I will be SSHed into different servers, uploading files, browsing, downloading, etc, and it will just quit loading Jquery.com (for example) until I sit and wait for a timeout. /EDIT This is my last resort. Please, someone, tell me what is happening. Thank you.

    Read the article

  • Why do I need to set up Autologon values in registry twice in before it works and can I fix this?

    - by jJack
    Background: As part an automated testing suite I am building, I need to set up Autologon on my virtual machines 'on demand'. By on demand, I mean that I don't want to necessarily pre-configure my VM or any snapshot to have Autologon set up already, for security reasons and also a huge business case. My solution so far: I'm copying a script to the guest machine and then using Sysinternals PsExec to execute it. The script is: reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v DefaultUserName /t REG_SZ /d myusername reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v DefaultPassword /t REG_SZ /d myfakepassword reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v DefaultDomainName /t REG_SZ /d mydomain reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v ForceAutoLogon /t REG_SZ /d 1 reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v AutoAdminLogon /t REG_SZ /d 1 reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\AutoLogonChecked" /f /ve /d 1 Note: I don't believe AutoLogonChecked is required for machines post Windows 2000 but I'm doing it just in case for now. Maybe ForceAutoLogon isn't either, not sure yet. The Problem: I see PsExec executes this properly and all the values are in the registry, however when I restart the machine, the user isn't automatically logged on...When I run this a second time then restart the machine, the user is finally logged on. A diff between the registry states shows that the first time I run this, it is missing both the "1" for AutoAdminLogon, and also the DefaultPassword key. The second time I execute it, these values are correctly intact as I intended. So, what is going on here? Is this expected? This post claims in the end that it really all just works (the problem was that a logoff script was setting off the values). Doesn't seem to work for me however. Note this seems unique to Windows 7, does not occur in Windows XP Also note that you don't need PsExec to recreate the issue - just modify the registry yourself EDIT/update: Login interactively and run script (so, not executing it remotely), logging off automatically logs me back in (so, it works) remotely execute the script in guest when I'm interactively logged in, logging off automatically logs me back in (so, it works) remotely execute the script in guest when with non-interactive session if I log in afterwards (so, interactive now) then back off, it logs me back in (so, it then works) EDIT/update 2: This only occurs for Win7x86, Win7x64, Win8x64. This does not occur for Windows XP

    Read the article

  • How do I protect a low budget network from rogue DHCP servers?

    - by Kenned
    I am helping a friend manage a shared internet connection in an apartment buildling with 80 apartments - 8 stairways with 10 apartments in each. The network is laid out with the internet router at one end of the building, connected to a cheap non-managed 16 port switch in the first stairway where the first 10 apartments are also connected. One port is connected to another 16 port cheapo switch in the next stairway, where those 10 apartments are connected, and so forth. Sort of a daisy chain of switches, with 10 apartments as spokes on each "daisy". The building is a U-shape, approximately 50 x 50 meters, 20 meters high - so from the router to the farthest apartment it’s probably around 200 meters including up-and-down stairways. We have a fair bit of problems with people hooking up wifi-routers the wrong way, creating rogue DHCP servers which interrupt large groups of the users and we wish to solve this problem by making the network smarter (instead of doing a physical unplugging binary search). With my limited networking skills, I see two ways - DHCP-snooping or splitting the entire network into separate VLANS for each apartment. Separate VLANS gives each apartment their own private connection to the router, while DHCP snooping will still allow LAN gaming and file sharing. Will DHCP snooping work with this kind of network topology, or does that rely on the network being in a proper hub-and-spoke-configuration? I am not sure if there are different levels of DHCP snooping - say like expensive Cisco switches will do anything, but inexpensive ones like TP-Link, D-Link or Netgear will only do it in certain topologies? And will basic VLAN support be good enough for this topology? I guess even cheap managed switches can tag traffic from each port with it’s own VLAN tag, but when the next switch in the daisy chain receives the packet on it’s “downlink” port, wouldn’t it strip or replace the VLAN tag with it’s own trunk-tag (or whatever the name is for the backbone traffic). Money is tight, and I don’t think we can afford professional grade Cisco (I have been campaigning for this for years), so I’d love some advice on which solution has the best support on low-end network equipment and if there are some specific models that are recommended? For instance low-end HP switches or even budget brands like TP-Link, D-Link etc. If I have overlooked another way to solve this problem it is due to my lack of knowledge. :)

    Read the article

  • Splitting an internet connection between multiple separate subnetworks

    - by pythonian4000
    Problem I have an internet connection that I want to split between four separate networks. My requirements are: I need to be able to monitor the amount of bandwidth and data being used by each network, and notify or control as necessary. The four networks should only be able to connect to the internet, not each other. My parents need to be able to operate it, so it needs a simple, preferably Windows-based GUI. Progress so far Server I have a mini-ITX server with six Gigabit ethernet ports - one for the ethernet internet connection, one for each of the four networks, and one for remote access to the server for administration. Bandwidth control I spent a long time researching solutions here. The majority of the control systems/software I found could control bandwidth usage via QOS, but could not monitor or control the amount of data being used. Eventually I found the SoftPerfect Bandwidth Manager, which has everything I need in terms of monitoring and control - per-interface quota management, usage statistics, a web interface for checking usage, and email notifications when quotas are exceeded. It is also Windows-based and has a simple GUI. Internet sharing This is where I am having issues. I am currently using Windows XP Pro SP2 for the server (yes, I know this is far from ideal, but it's the only spare Windows OS I currently have). I can't use the built-in Internet Connection Sharing for several reasons: The upstream internet router has an IP of 192.168.0.1 which ICS clashes with, and I cannot change the router settings. ICS can only share an internet connection with a single interface, but I have four. I have tried bridging the four network cards, but then the Bandwidth Manager cannot see the four individual interfaces - it only sees the bridge. I have tried setting up Dual DHCP DNS server (and am having issues getting DHCP offers to be received by clients), but that would still require gateway software of some sort, which I have been unable to find. My current attempt is to use OpenVPN, with a server for the internet NIC and a separate client for each of the four networks. My thought is that I could bridge the OpenVPN TAP devices to each NIC, meaning that the Bandwidth Manager would control traffic from the bridge instead of the interface. I have not made much progress here though - I've never used OpenVPN before. Questions Is there a Windows software package that does everything I need? (Unlikely, I know) Is there a Windows software package that will share internet between multiple NICs without bridging? Are either of my about attempts feasible? Would it help to have a newer/server version of Windows? Is there a non-Windows alternative that is easy to use?

    Read the article

  • Adaptec 5805 after reboot don't starting

    - by Rakedko ShotGuns
    After rebooting the system, the controller is not included. It only works if the computer is shut down and turn off. Late i update firmware "Adaptec RAID 5805 Firmware Build 18948" How to fix the problem? add Log Configuration summary Server name.....................raid_test Adaptec Storage Manager agent...7.31.00 (18856) Adaptec Storage Manager console.7.31.00 (18856) Number of controllers...........1 Operating system................Windows Configuration information for controller 1 ------------------------------------------------------- Type............................Controller Model...........................Adaptec 5805 Controller number...............1 Physical slot...................2 Installed memory size...........512 MB Serial number...................8C4510C6C9E Boot ROM........................5.2-0 (18948) Firmware........................5.2-0 (18948) Device driver...................5.2-0 (16119) Controller status...............Optimal Battery status..................Charging Battery temperature.............Normal Battery charge amount (%).......37 Estimated charge remaining......0 days, 16 hours, 12 minutes Background consistency check....Disabled Copy back.......................Disabled Controller temperature..........Normal (40C / 104F) Default logical drive task priorityHigh Performance mode................Dynamic Number of logical devices.......1 Number of hot-spare drives......0 Number of ready drives..........0 Number of drive(s) assigned to MaxCache cache0 Maximum drives allowed for MaxCache cache8 MaxCache Read Cache Pool Size...0 GB NCQ status......................Enabled Stay awake status...............Disabled Internal drive spinup limit.....0 External drive spinup limit.....0 Phy 0...........................No device attached Phy 1...........................No device attached Phy 2...........................No device attached Phy 3...........................1.50 Gb/s Phy 4...........................No device attached Phy 5...........................No device attached Phy 6...........................No device attached Phy 7...........................No device attached Statistics version..............2.0 SSD Cache size..................0 Pages on fetch list.............0 Fetch list candidates...........0 Candidate replacements..........0 69319...........................31293 Logical device..................0 Logical device name............. RAID level......................Simple volume Data space......................148,916 GB Date created....................09/19/2012 Interface type..................Serial ATA State...........................Optimal Read-cache mode.................Enabled Preferred MaxCache read cache settingEnabled Actual MaxCache read cache setting Disabled Write-cache mode................Enabled (write-back) Write-cache setting.............Enabled (write-back) Partitioned.....................Yes Protected by hot spare..........No Bootable........................Yes Bad stripes.....................No Power Status....................Disabled Power State.....................Active Reduce RPM timer................Never Power off timer.................Never Verify timer....................Never Segment 0.......................Present: controller 1, connector 0, device 0, S/N 9RX3KZMT Overall host IOs................99075 Overall MB......................4411203 DRAM cache hits.................71929 SSD cache hits..................0 Uncached IOs....................29239 Overall disk failures...........0 DRAM cache full hits............71929 DRAM cache fetch / flush wait...0 DRAM cache hybrid reads.........3476 DRAM cache flushes..............-- Read hits.......................0 Write hits......................0 Valid Pages.....................0 Updates on writes...............0 Invalidations by large writes...0 Invalidations by R/W balance....0 Invalidations by replacement....0 Invalidations by other..........0 Page Fetches....................0 0...............................0 73..............................10822 8...............................3 46138...........................4916 27184...........................15226 20875...........................323 16982...........................1771 1563............................5317 1948............................2969 Serial attached SCSI ----------------------- Type............................Disk drive Vendor..........................Unknown Model...........................ST3160815AS Serial Number...................9RX3KZMT Firmware level..................3.AAD Reported channel................0 Reported SCSI device ID.........0 Interface type..................Serial ATA Size............................149,05 GB Negotiated transfer speed.......1.50 Gb/s State...........................Optimal S.M.A.R.T. error................No Write-cache mode................Write back Hardware errors.................0 Medium errors...................0 Parity errors...................0 Link failures...................0 Aborted commands................0 S.M.A.R.T. warnings.............0 Solid-state disk (non-spinning).false MaxCache cache capable..........false MaxCache cache assigned.........false NCQ status......................Enabled Phy 0...........................1.50 Gb/s Power State.....................Full rpm Supported power states..........Full rpm, Powered off 0x01............................113 0x03............................98 0x04............................99 0x05............................100 0x07............................83 0x09............................75 0x0A............................100 0x0C............................99 0xBB............................100 0xBD............................100 0xBE............................61 0xC2............................39 0xC3............................69 0xC5............................100 0xC6............................100 0xC7............................200 0xC8............................100 0xCA............................100 Aborted commands................0 Link failures...................0 Medium errors...................0 Parity errors...................0 Hardware errors.................0 SMART errors....................0 End of the configuration information for controller 1 List item

    Read the article

  • How to grow to be global sysadmin of an organization?

    - by user64729
    Bit of a non-technical question but I have seen questions of the career development type on here before so hopefully it is fine. I work for a fast growing but still small organization (~65 employees). I have been their external sysadmin for a while now, looking after hosted Linux servers and infrastructure. In the past 12 months I have been transforming into the internal sysadmin for our office too. I'm currently studying Cisco CCNA to cover the demands of being an internal sysadmin and looking after the office LAN, routers, switches and VPNs. Now they want me to look after the global sysadmin function of the organization as a whole. The organization has 3 offices in total, 2 in the UK and 1 in the US. I work in one of the UK offices. The other offices are primarily Windows desktops with AD domain shops. My office is primarily a Linux shop with a file-server and NFS/NIS (no AD domain for the Windows desktops yet but it's in the works). Each other office has a sysadmin which in theory I am supposed to supervise but in reality each is independent. I have a very competent junior sysadmin working with me who shares the day-to-day tasks and does some of the longer term projects with my supervision. My boss has asked me how to grow from being the external sysadmin to the global sysadmin. I am to ponder this and then report back to him on how to achieve this. My current thoughts are: Management training or professional development - eg. reading books such as "Influencer" and "7 Habits". Also I feel I should take steps to improving communication skills since a senior person is expected to talk and speak out more often. Learn more about Windows and Active Directory - I'm an LPI-certified guy and have a lot of experience in Linux (Ubuntu or desktop, Debian/Ubuntu as server). Since the other offices are mainly Windows-domains it makes sense to skill-up in that area so I can understand what the other admins are talking about. Talk to previous colleagues who have are are in this role already - to try and get the benefit of their experience. Produce an "IT Roadmap" or similar that maps out where we want the organization to be and when, plotted out over the next couple of years with regards to internal and external infrastructure. I have produced a "Security roadmap" already which does cover some of these things. I guess this can summed up as "thinking more strategically"? I'd appreciate comments from anyone who has been through a similar situation, thanks.

    Read the article

  • Weird random application hang problem

    - by haridsv
    I am trying to understand an application hang problem that started up lately on my windows xp system. The system runs fine for days (sometimes) without ever shutting down or putting it to sleep, but the problem first shows up as one of the apps hanging. The application's UI stops responding or one or more background threads hang, so even though the GUI is responding, it is not doing anything (e.g., in VirtualDub's case, the UI responds fine, but the job doesn't progress and I won't even be able to abort it). The weirdness part comes from the fact that if I try to kill such an app, the program that is used to kill it goes into the same mode (i.e, that hangs instead of the original). E.g., if I use Process Explorer to kill it, the original program exits, but procexp now hangs. If I use another instance of procexp to kill the one that is hanging, this repeats, so there is always at least one program hanging in that state. This is not specific to procexp, I tried the native task manager and even the "End Process" dialog from windows explorer that shows up when you try to close a non-responsive GUI (in this case, the explorer itself hangs). The only program that didn't hang after the kill, is the command line taskkill. However, in this case, explorer hangs instead of taskkill. Also, once this problem starts manifesting, it soon ends up freezing the whole system to the extent that even a clean shutdown is not possible, so I have learned to reboot as soon as I notice this problem, however this is very inconvenient, as I often have encoding batch jobs going on which can't continue the job after the restart. The longer I leave the system running after seeing this problem, the more applications get into this state. I have tried to do a repair install but that didn't make any difference. I also uninstalled some of the newer installs, but again no difference. I tried to search online, but got inundating results for generic hang and crash related problems. Though I couldn't notice any pattern, it seems as though the problem is more frequent if I have some video encoding going on at that time. I had the system running for days when I only do browsing and internet audio/video chat before I decide to start encoding something and the problem starts to show up. I am not too sure if it is the encoding program that first hangs, though I almost always noticed that too hanging (like the VirtualDub stopping to make progress). I also had to reboot 3 times on one day when I was heavily experimenting with encoding. I would appreciate any help in narrowing down this problem and save me the trouble of reinstalling. I don't especially want to loose my gotd installs.

    Read the article

  • Slow Windows Explorer on Windows 7

    - by MadBoy
    I have Laptop with i7 (4 cores), 8GB ram and SSD OCZ Vertex 3 MaxIOPS which in testing that I did just now does 400mb/s+ read/write. However the responsiveness of Windows Explorer is far from being perfect. Opening up Computer, Documents, going into folders is very slow (1-5seconds). I don't have any viruses or spyware and I have tried changing properties to optimize view for General Items. I tried disabling Search Indexer but it made search in Outlook 2010 crawl and didn't bring any other effect. Even double clicking on file takes some time to open things up (like clicking a Word document). I don't have any drives mapped, my computer is not joined to domain. I have multiple VPN connections that I connect to but they all have disabled default gateways. I tried using CC Cleaner or some Windows 7 Tweaks app to disable some things. I am power user using Visual Studio, Tortoise SVN and other developer/administration apps. Any non obvious ideas? Edit: So I've been trying to pinpoint where the issue comes from and it seems that straight after reboot Windows Explorer opens very fast, when I load 3-4 programs (Royal TS, Visual Studio, Outlook) it's noticeably slower and the more programs I have it gets worse. After I start closing programs it starts working better and if I leave 2 open it's fast again. I tried doing some research with DiskMon and other programs from sysinternals but couldn't find anything suspicious. Below are stats during normal usage with a lots of programs open: - Ram usage with a lot of programs open and no swap file (i disabled it for testing): 6.95GB - CPU usage: 15%, none of the cores takes more then 50% (I have VS 2010 open x 4) HD Tune Pro: OCZ-VERTEX3 MI Benchmark Test capacity: full Read transfer rate Transfer Rate Minimum : 363.9 MB/s Transfer Rate Maximum : 505.5 MB/s Transfer Rate Average : Access Time : Burst Rate : CPU Usage : HD Tune Pro: OCZ-VERTEX3 MI File Benchmark Drive C: Transfer rate test File Size: 500 MB Sequential read 484102 KB/s Sequential write 444714 KB/s Random read 7779 IOPS Random write 16888 IOPS Random read (queue depth = 32) 73007 IOPS Random write (queue depth = 32) 69790 IOPS HD Tune Pro: OCZ-VERTEX3 MI Random Access Test capacity: full Read test Transfer size operations / sec avg. access time max. access time avg. speed 512 bytes 3260 IOPS 0.306 ms 2.106 ms 1.592 MB/s 4 KB 4161 IOPS 0.240 ms 2.006 ms 16.256 MB/s 64 KB 2382 IOPS 0.419 ms 2.367 ms 148.934 MB/s 1 MB 449 IOPS 2.225 ms 4.197 ms 449.407 MB/s Random 809 IOPS 1.235 ms 6.551 ms 410.527 MB/s HD Tune Pro: OCZ-VERTEX3 MI Extra Tests Test capacity: full Random seek 3975 IOPS 0.252 ms 1.941 MB/s Random seek 4 KB 4245 IOPS 0.236 ms 16.583 MB/s Butterfly seek 4086 IOPS 0.245 ms 1.995 MB/s Random seek / size 64 KB 3812 IOPS 0.262 ms 58.606 MB/s Random seek / size 8 MB 120 IOPS 8.348 ms 485.737 MB/s Sequential outer 4524 IOPS 0.221 ms 282.721 MB/s Sequential middle 4429 IOPS 0.226 ms 276.818 MB/s Sequential inner 5504 IOPS 0.182 ms 344.000 MB/s Burst rate 4472 IOPS 0.224 ms 279.475 MB/s

    Read the article

  • Layer 3 switch routing

    - by Yoshiwaan
    I need help moving over to using our layer 3 switch as the inter vlan routing device rather than our cisco router. I've mostly got it working but I've got stuck near the end and need some advice (I think I just need a bit of education on the subject really). Cur I have a Dell PowerConnect 7048 connecting to a Cisco 1841 router. I've got a few key excerpts from the configs to provide the key information. On the powerconnect I have the following: ip routing ip default-gateway 172.31.14.1 ip route 0.0.0.0 0.0.0.0 172.31.14.1 253 ! interface vlan 1 ip address 172.31.14.254 255.255.255.0 exit interface vlan 2 ip address 172.31.19.254 255.255.255.0 exit interface vlan 4 ip address 172.31.16.254 255.255.255.0 ! interface Gi1/0/1 description 'Link to L7Router01' switchport mode trunk switchport trunk allowed vlan except 3,7-4093 exit ! and on the Cisco the following: interface FastEthernet0/0 ip address 172.31.14.1 255.255.255.0 ip nat inside ip virtual-reassembly ! interface FastEthernet0/0.2 description Accounts VLAN encapsulation dot1Q 2 ip address 172.31.19.1 255.255.255.0 ip nat inside ip virtual-reassembly ! interface FastEthernet0/0.4 description Voice VLAN encapsulation dot1Q 4 ip address 172.31.16.1 255.255.255.0 ip nat inside ip virtual-reassembly ! So what I'm doing is moving clients over so that their default gateway is a 172.31.x.254 address rather than a 172.31.x.1 address. This works great for inter-vlan routing, I have no issues with this. The switch can also access the router no worries, and users on the 172.31.14.0/24 network can access all interfaces and sub-interfaces on the router, including 172.31.14.1. They can also access all of the interfaces that the router connects off to, no worries there. The problem I have is that users on the 172.31.16.0/24 and 172.31.19.0/24 subnets cannot access either 172.31.14.1 or any of the subnets the router connects to. They can, however, connect to BOTH of the sub interfaces on the router from either subnet. What am I missing here? Why can't the vlans connect to the non-sub interface on the router? Are tagged packets being sent to this interface?

    Read the article

  • Stop squid caching 302 and 307 with deny_info

    - by 0xception
    TLDR: 302, 307 and Error pages are being cached. Need to force a refresh of the content. Long version: I've setup a very minimal squid instance running on a gateway which shouldn't not cache ANYTHING but needs to be solely used as a domain based web filter. I'm using another application which redirects un-authenticated users to the proxy which then uses the deny_info option redirects any non-whitelisted request to the login page. After the user has authenticated the firewall rule gets placed so they no longer get sent to the proxy. The problem is that when a user hits a website (xkcd.com) they are unauthenticated so they get redirected via the firewall: iptables -A unknown-user -t nat -p tcp --dport 80 -j REDIRECT --to-port 39135 to the proxy at this point squid redirects the user to the login page using a 302 (i've also tried 307, and i've also make sure the headers are set to no-cache and/or no-store for Cache-Control and Pragma). Then when the user logs into the system they get firewall rule which no longer directs them to the squid proxy. But if they go to xkcd.com again they will have the original redirection page cached and will once again get the login page. Any idea how to force these redirects to NOT be cached by the browser? Perhaps this is a problem w/ the browsers and not squid, but not sure how to get around it. Full squid config below. # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 ::1 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 acl localnet src 192.168.182.0/23 # RFC1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl https port 443 acl http port 80 acl CONNECT method CONNECT # # Disable Cache # cache deny all via off negative_ttl 0 seconds refresh_all_ims on #error_default_language en # Allow manager access only from localhost http_access allow manager localhost http_access deny manager # Deny access to anything other then http http_access deny !http # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !https visible_hostname gate.ovatn.net # Disable memory pooling memory_pools off # Never use neigh cache objects for cgi-bin scripts hierarchy_stoplist cgi-bin ? # # URL rewrite Test Settings # #acl whitelist dstdomain "/etc/squid/domains-pre.lst" #url_rewrite_program /usr/lib/squid/redirector #url_rewrite_access allow !whitelist #url_rewrite_children 5 startup=0 idle=1 concurrency=0 #http_access allow all # # Deny Info Error Test # acl whitelist dstdomain "/etc/squid/domains-pre.lst" deny_info http://login.domain.com/ whitelist #deny_info ERR_ACCESS_DENIED whitelist http_access deny !whitelist http_access allow whitelist http_port 39135 transparent ## Debug Values access_log /var/log/squid/access-pre.log cache_log /var/log/squid/cache-pre.log # Production Values #access_log /dev/null #cache_log /dev/null # Set PID file pid_filename /var/run/gatekeeper-pre.pid SOLUTION: I believe I might have found a solution to this. After days and days trying to figure it out, only through a random stumble I found client_persistent_connections off server_persistent_connections off This did the trick. So it wasn't so much cache as it was a single persistent connection messing things up. W000T!

    Read the article

  • Persuading openldap to work with SSL on Ubuntu with cn=config

    - by Roger
    I simply cannot get this (TLS connection to openldap) to work and would appreciate some assistance. I have a working openldap server on ubuntu 10.04 LTS, it is configured to use cn=config and most of the info I can find for TLS seems to use the older slapd.conf file :-( I've been largely following the instructions here https://help.ubuntu.com/10.04/serverguide/C/openldap-server.html plus stuff I've read here and elsewhere - which of course could be part of the problem as I don't totally understand all of this yet! I have created an ssl.ldif file as follows; dn:cn=config add: olcTLSCipherSuite olcTLSCipherSuite: TLSV1+RSA:!NULL add: olcTLSCRLCheck olcTLSCRLCheck: none add: olcTLSVerifyClient olcTLSVerifyClient: never add: olcTLSCACertificateFile olcTLSCACertificateFile: /etc/ssl/certs/ldap_cacert.pem add: olcTLSCertificateFile olcTLSCertificateFile: /etc/ssl/certs/my.domain.com_slapd_cert.pem add: olcTLSCertificateKeyFile olcTLSCertificateKeyFile: /etc/ssl/private/my.domain.com_slapd_key.pem and I import it using the following command line ldapmodify -x -D cn=admin,dc=mydomain,dc=com -W -f ssl.ldif I have edited /etc/default/slapd so that it has the following services line; SLAPD_SERVICES="ldap:/// ldapi:/// ldaps:///" And everytime I'm making a change, I'm restarting slapd with /etc/init.d/slapd restart The following command line to test out the non TLS connection works fine; ldapsearch -d 9 -D cn=admin,dc=mydomain,dc=com -w mypassword \ -b dc=mydomain,dc=com -H "ldap://mydomain.com" "cn=roger*" But when I switch to ldaps using this command line; ldapsearch -d 9 -D cn=admin,dc=mydomain,dc=com -w mypassword \ -b dc=mydomain,dc=com -H "ldaps://mydomain.com" "cn=roger*" This is what I get; ldap_url_parse_ext(ldaps://mydomain.com) ldap_create ldap_url_parse_ext(ldaps://mydomain.com:636/??base) ldap_sasl_bind ldap_send_initial_request ldap_new_connection 1 1 0 ldap_int_open_connection ldap_connect_to_host: TCP mydomain.com:636 ldap_new_socket: 3 ldap_prepare_socket: 3 ldap_connect_to_host: Trying 127.0.0.1:636 ldap_pvt_connect: fd: 3 tm: -1 async: 0 TLS: can't connect: A TLS packet with unexpected length was received.. ldap_err2string ldap_sasl_bind(SIMPLE): Can't contact LDAP server (-1) Now if I check netstat -al I can see; tcp 0 0 *:www *:* LISTEN tcp 0 0 *:ssh *:* LISTEN tcp 0 0 *:https *:* LISTEN tcp 0 0 *:ldaps *:* LISTEN tcp 0 0 *:ldap *:* LISTEN I'm not sure if this is significant as well ... I suspect it is; openssl s_client -connect mydomain.com:636 -showcerts CONNECTED(00000003) 916:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:s23_lib.c:188: I think I've made all my certificates etc OK and here are the results of some checks; If I do this; certtool -e --infile /etc/ssl/certs/ldap_cacert.pem I get Chain verification output: Verified. certtool -e --infile /etc/ssl/certs/mydomain.com_slapd_cert.pem Gives "certtool: the last certificate is not self signed" but it otherwise seems OK? Where have I gone wrong? Surely getting openldap to run securely on ubuntu should be easy and not require a degree in rocket science! Any ideas?

    Read the article

  • Confirm disk is broken when it passes all diagnostics

    - by Halfgaar
    I have a system with a potentially broken disk, but the disk passes all manner of diagnostics. I have been unable to confirm that the disk is broken. What are my options? I could just replace the disk, but because this situation is very similar to another more severe situation I have (long story), I'd like to actually make a proper diagnosis as opposed to randomly binning hardware. The issue and history is this: I had a Debian Linux PC (500 MHz P3) acting as router, nagios and munin. It crashed every couple of weeks. No logs or dmesg could be obtained (because it's an old Compaq that only boots when you configure it as keyboardless, making connecting a keyboard later, once it's booted, impossible). At the time, I just replaced the computer with another Compaq (P4 2.4 GHz) because I thought the hardware was faulty. However, it still crashed every couple of weeks. the difference is that on this computer, I can still SSH into it. It gives all kinds of errors on hda. I'd like to confirm that the disk is broken, but nothing I do confirms this: SMART error logs shows no errors. Normally when a disk starts acting up, SMART my pass, but it still records a read-error in the error log. SMART self-test (smartctl -t long /dev/sda) completes without errors. re-allocated sector count (a tell-tale parameter) has been 31 all its life, even when the disk was still in use in my desktop PC years ago, and it still is. The figure never changed. dd if=/dev/sda of=/dev/null bs=4096 passes with flying colors. What else can I do to assess the health of the drive? Again, this is not about making this router fully functional again, this is a disk forensic question, because it just so happens that I have another server that potentially has the same problem, and knowing the answer to this will possibly help me greatly. For the record, below are logs and such. This is the smartctl -a output: smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family Device Model: ST3120026A Serial Number: 5JT1CLQM Firmware Version: 3.06 User Capacity: 120,034,123,776 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Mon Jul 1 21:18:33 2013 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 24) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 050 046 006 Pre-fail Always - 47766662 3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 10 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 31 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 820305 9 Power_On_Hours 0x0032 048 048 000 Old_age Always - 46373 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 605 194 Temperature_Celsius 0x0022 036 065 000 Old_age Always - 36 195 Hardware_ECC_Recovered 0x001a 050 046 000 Old_age Always - 47766662 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 196 000 Old_age Always - 6 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 80% 46361 - # 2 Extended offline Completed without error 00% 46358 - # 3 Short offline Completed without error 00% 12046 - # 4 Extended offline Completed without error 00% 10472 - # 5 Short offline Completed without error 00% 10471 - # 6 Short offline Completed without error 00% 10471 - # 7 Short offline Completed without error 00% 6770 - # 8 Extended offline Aborted by host 90% 5958 - # 9 Extended offline Aborted by host 90% 5951 - #10 Short offline Completed without error 00% 5024 - #11 Extended offline Aborted by host 80% 5024 - #12 Short offline Completed without error 00% 3697 - #13 Short offline Completed without error 00% 237 - #14 Short offline Completed without error 00% 145 - #15 Short offline Completed without error 00% 69 - #16 Extended offline Completed without error 00% 68 - #17 Short offline Completed without error 00% 66 - #18 Short offline Completed without error 00% 49 - #19 Short offline Completed without error 00% 29 - #20 Short offline Completed without error 00% 29 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. And this is the dmesg error when it has crashed (which repeats for a bunch of different sectors): [1755091.211136] sd 0:0:0:0: [sda] Unhandled error code [1755091.211144] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [1755091.211151] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 08 fe ad 38 00 00 08 00 [1755091.211166] end_request: I/O error, dev sda, sector 150908216

    Read the article

  • Nginx $scheme doesn't always work while using SSL for one specific page

    - by jjiceman
    I read and followed this question in order to configure nginx to force SSL for one page (admin.php for XenForo), and it is working well for a few of the site administrators but is not for myself. I was wondering if anyone has any advice on how to improve this configuration: ... ssl_certificate example.net.crt; ssl_certificate_key example.key; server { listen 80 default; listen 443 ssl; server_name www.example.net example.net; access_log /srv/www/example.net/logs/access.log; error_log /srv/www/example.net/logs/error.log; root /srv/www/example.net/public_html; index index.php index.html; location / { if ( $scheme = https ){ rewrite ^ http://example.net$request_uri? permanent; } try_files $uri $uri/ /index.php?$uri&$args; index index.php index.html; } location ^~ /admin.php { if ( $scheme = http ) { rewrite ^ https://example.net$request_uri? permanent; } try_files $uri /index.php; include fastcgi_params; fastcgi_pass 127.0.0.1:9000; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param HTTPS on; } location ~ \.php$ { try_files $uri /index.php; include fastcgi_params; fastcgi_pass 127.0.0.1:9000; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param HTTPS off; } } ... It seems that the extra information in the location ^~ /admin.php block is unecessary, does anyone know of an easy way to avoid duplicate code? Without it it skips the php block and just returns the php files. Currently it applies https correctly in Firefox when I navigate to admin.php. In Chrome, it downloads the admin.php page. When returning to the non-https website in Firefox, it does not correctly return to http but stays as SSL. Like I said earlier, this only happens for me, the other admins can go back and forth without a problem. Is this an issue on my end that I can fix? And does anyone know of any ways I could reduce duplicate configuration options in the configuration? Thanks in advance!

    Read the article

  • Intermittent internet access on a flat network - Router is connected

    - by Naveed
    I’m looking for some help with network settings. I’ve just started a new job (non-IT!) and we have problems with our office network. I’m the most IT literate in the organisation (15 permanent employees) and so have been dealing with IT issues. Our main bit of software is web-based so we need constant web access but it sometimes goes down for between 20 minutes and 3 hours despite everything seemingly working fine. It’s a flat network with wireless APs, BT Business Broadband 8Mbit connection and that’s about it. We have no servers and no standard settings and staff are encouraged to bring in their own laptops and connect! The network basically exists to provide internet access and that’s it. We also have students accessing the wireless (and I know there’s a whole list of access and content issues etc but right now we just need internet access stabilised). This is what we have: Building 1 Cisco SLM-224P 24-port PoE 10/100 switch with 2 gigabit ports 3 x ZyXEL NWA-3160 wireless APs Samsung OfficeServ 7100 phone server which borrows the building’s wiring Building 2 Netgear GS605-UK 5-port 10/100/1000 switch 1 x ZyXEL NWA-3160 wireless AP 1 x BT Business Hub – 2wire BT2700hgv – is the DHCP server We have 2 link cables between the buildings. One connects the two switches on a gigabit port. The second (oddly) connects the switch in building 2 to the OfficeServ server in building 1. When the internet goes down I can still access the router through a wireless connection. I can also ping websites and get a response. Firefox just says “Cannot connect” etc. The system then heals itself when it feels like it. (Sorry if this is asking too much but) These are my immediate questions… Why would browser-based internet go down? I don’t know enough about protocols etc but I can try to standardise settings. The WAPs have a DNS server setting and I don’t know whether it should be “None” or “From DHCP”. What should be the DHCP server? The router or the Cisco switch? Or something else?! Would there be any problem in connecting the second link from switch to switch? Is that good practice? Is it worth swapping the Netgear GS605 with either a Cisco SG200-08 or Netgear GS108T-200? Is it worth upgrading the router to, for instance, a Cisco RV042G Dual Gigabit router which would also act as a switch? Or is it better to have a separate router and switch in Building 2?

    Read the article

  • Gateway GT5220 Boot/POST Failure

    - by John Rudy
    I have a Gateway GT5220 I'm troubleshooting. It is, in fact, the machine I just gave my father for his birthday a couple months ago. (Prior to that, it was my home PC. My home PC is now the MacBook on which I'm writing this.) Before going any further, I suspect that the answer will be, "It's worse than that, it's dead, Jim, it's dead, Jim, it's dead, Jim." At least, mobo and/or CPU. The initial symptoms were as follows: Turn on power All fans fire up (thus making it so I can't hear if the hard drive is spinning or not, nor are my hands sensitive enough anymore to feel it) No LEDs remained lit on the front panel. (Initially, the hard drive indicator flashed briefly.) No beep, no video, no nothing. Following some advice I found here, I tried to "drain the stored power." After following those steps, the new symptoms were: Turn on power All fans fire up The front panel LEDs remained lit! After about 20, maybe 30 seconds, we had video! Sort of. We got to the Gateway splash/POST screen, which appeared thoroughly corrupted. How corrupted? Well, I imagine it's what a POST screen would look like after reading the wrong passage out of the Necronomicon: It stayed there. I gave it at least 5, maybe 6 minutes, and it didn't move. So I shut her down, started her up again, and now (this is where we currently stand, symptomatically) we have this: Turn on power All fans fire up The front panel LEDs remain lit No video, no beep, no nothing. I'm a software guy; haven't done real hardware troubleshooting in years. My gut tells me that the mobo and/or CPU is fried, and unfortunately my gut didn't get to be as big as it is being wrong all the time. :( In addition to the link above, I have read all of the following (trying to save you some LMGTFY trouble): Gateway Support POST Error Messages and Handling About a zillion (useless) POST beep code sites A kioskea.net post indicating that most likely we're at what I consider "total loss" (mobo and/or CPU) My questions: Are there any conditions other than mobo/CPU that could cause symptoms like these? Is it worth my time to try the next hardware troubleshooting step?(IE, remove all non-critical hardware from the machine, try to boot, systematically replace one by one until we find the failing component) Which mobos will fit in the Gateway GT5220 case (with rear ports correctly aligned)? (Why this is not a dupe: I wouldn't have posted this question if it hadn't been for the funkadelic possessed video display on the one occasion we got video out. I think that justified this not being an exact dupe. Of course, if the community overrules, I will understand.)

    Read the article

< Previous Page | 489 490 491 492 493 494 495 496 497 498 499 500  | Next Page >