Search Results

Search found 18096 results on 724 pages for 'let'.

Page 495/724 | < Previous Page | 491 492 493 494 495 496 497 498 499 500 501 502  | Next Page >

• Add Network Printer drivers in Windows 7/Server 2008 R2?

  - by Matias Nino

  I'm running a 64 bit Windows 7 / Windows 2008 R2 workstation that I just installed. I need to add a printer that is shared on the network from a 32bit Windows 2000 print server. This is an HP LaserJet 5Si printer, the drivers for which HP tells me are automatically built into Windows 7/R2. However, whenever I connect to the printer or try to add it, I get the following screen: Upon clicking OK, I get this screen asking me to locate the driver: How can I possibly locate a driver that is SUPPOSED TO BE NATIVELY SUPPORTED on Windows 7/R2? The tough part is that this printer is one of many shared on a server and does not have a direct IP address. Even worse: I have no access to the print server so I cannot put the 64 bit drivers on there. Any ideas? UPDATE: HP doesn't make a Vista driver either. It claims it is natively supported by Vista and 7, which is true because I am able to create a local printer on a fake tcp/ip port and Windows lets me pick the proper driver. However, when adding from the network, Windows does not let me select a driver and demands an INF. I tried searching the entire sub-structure of the C:\Windows directory and could not find any INF files that contain HP information. The INF might be located somewhere in the Windows installation DVD, but all the files on the DVD are compressed and unrecognizable. UPDATE #2 I installed the proper printer driver as a local printer (with no printer attached) and it installed. However, this did not change the fact that it STILL asks me to provide drivers when connecting to the networked printer.

  Read the article

• Install Ubuntu on a new netbook?

  - by torbengb

  I'm planning to buy a netbook, and I am considering to install Ubuntu on it. It would mainly be used by my wife at home for web browsing and email at home (lightweight is important, hence a netbook!), and we'd occasionally bring it along on travels (mostly as digital photo dropzone). I want to use Ubuntu instead of Windows because I'm sick of all the Windows hassle and updates. I'm not concerned about Windows applications; I'd switch to native alternatives as far as possible because really only Firefox and something like Picasa are needed. I'm considering an ASUS Eee PC 1001P or an MSI Wind U100 or an Point of View Mobii II (click the links for specs; nevermind that the rest is German). I'm not in the USA. Whatever I buy will most likely have Windows 7 on it but no optical drive. I would also buy a large-ish USB stick but not an external optical drive. Should I (and can I) install Ubuntu alongside Windows 7, or remove Windows? If I remove Windows first, how would I be able to reinstall it if I change my mind? Can I make a backup? Is a recovery CD usually provided? Should I choose the regular Ubuntu, or the Ubuntu Netbook Remix (UNR)? Does UNR allow me to install additional applications just as easily? Note: I'm asking about Ubuntu vs. Windows; let's skip the hardware discussion for now. Edit: I'm assuming that Windows is already installed; if it isn't then I would only install Ubuntu and this question is irrelevant.

  Read the article

• WebSeal and jsp content updated by Ajax

  - by lior chaga

  Hey, I have a problem running an application on environment with WebSeal. It is a web application with Java server that contains many parts that are replcaed within the page according to user input. For instance - a form called Outer.jsp may contain a form:options combo-box (by spring-forms), that uppon selection of an option, a certain Div is updated with a content produced by a jsp and fetched by an Ajax call (the ajax impementation in the client is done by Prototype JavaScript framework 1.5.1.2). Let's call the content fetched by ajax - Inner.jsp So Outer.jsp is fetching Inner.jsp, which in turn uses js functions in files included by the Outer.jsp. This, I think, is where my problem starts - Inner.jsp is not familiar with any of the functions included in Outer.jsp. And so, almost any operation performed by Inner.jsp is failing miserably. Needless to say - this works perfect when running on environment without WebSeal. Note that the scripting is enabled in WebSeal junction (with the -J option). I also see that the content returned by the Ajax call includes a document.cookie added by WebSeal (not sure it matters to this problem) Can anyone assist? Thanks! Lior

  Read the article

• Open Office crashes, recovers, crashes again

  - by Daniel R Hicks

  After completely reinstalling my laptop due to apparent registry corruption, I've encountered a problem with Open Office: I open a simple Calc spreadsheet, it comes up normally, but then after anywhere from 5 seconds to several minutes (without even touching the Calc window) OO crashes, then comes up through recovery. If I let it "recover" it will do so and bring the spreadsheet up again, only to repeat the crash scenario again. If I kept clicking "OK" it would apparently do this all day. I reinstalled OO once and the problem went away for awhile, but it came back. I then attempted to "reset" my profile (ie, rename the OO user directory in App Data), but OO crashed during the first startup after that, then resumed the original behavior. If I open the same file using Excel it complains of errors in the file, and "recovers" them, but the "error report" it generates contains no details. If I save the "recovered" file then OO Calc will open it, but the problem returns after saving again. Any ideas? (The system is Vista SP2, running OO 3.4.1) How to reproduce: Start Open Office Calc. Save workspace as "CrashTest.ods" From Task Manager kill Open Office (soffice.exe/bin -- one of each) Double click on the saved "CrashTest.ods" in Explorer. OO puts up a message that recovery will occur -- allow it. When the Calc window comes up, don't touch it -- just wait about 10 seconds. Calc window closes and OO puts up a message that recovery will occur -- from now on the sequence will repeat. I suspect this behavior is limited to a few (recent) versions of OO, and very possibly only Calc. Reported as Open Office Bug 1211094. Sigh!! As much as it irritates me, I'm having to switch over to Excel for several things I used to do with Calc. Excel has a miserable UI, but at least it says up for longer than 10 seconds.

  Read the article

• Browsing Audiobooks on an iPod Nano

  - by Electrons_Ahoy

  The sitation: I've got a stack of audiobooks in MP3 format in my iTunes library, and both an iPhone and an iPod Nano. After this question, I've changed the Media Kind for the audiobook MP3s from Music to Audiobook. This has been, overall, spectacular, as now I can resume where I was, they show up under Audiobooks, etc. On the iPhone, it's also super convenient, since the interface shows what used to be an album with multiple songs as a single book with multiple chapters, and going into "Audiobooks" presents me with a list of books, not tracks. The Nano, on the other hand, is a little strange. After changing the media type and re-syncing the ipod, the files in question are now listed under Audiobooks rather than Music, and the extra Audiobook features are present (resume playback and so on,) but the Audiobooks menu just lists all the MP3 tracks on the iPod in alphabetical order, ignoring whichever book/album they belong to - and doesn't seem to let me browse them any other way. This is, clearly, a little sub-optimal. Did I screw something up? How do I get the Nano to treat the files in a similar way to the way the iPhone and iTunes does - as books with chapters? Is there a step I missed somewhere? Do I need to reformat the iPod? Is this even possible? (Footnote: shameless bump, since this just scored me a tumbleweed.)

  Read the article

• Why can't I navigate Active Directory within Powershell?

  - by Myrddin Emrys

  I have an AD: drive, which should allow me to browse active directory from within Powershell. But when I try to use it, it will not let me navigate beyond the root. From what I have read the given commands should work, but they are failing. PS AD:\> ls Name ObjectClass DistinguishedName ---- ----------- ----------------- company domainDNS DC=company,DC=com Configuration configuration CN=Configuration,DC=company,DC=com Schema dMD CN=Schema,CN=Configuration,DC=company,DC=com ForestDnsZones domainDNS DC=ForestDnsZones,DC=company,DC=com DomainDnsZones domainDNS DC=DomainDnsZones,DC=company,DC=com PS AD:\> cd schema Set-Location : Cannot find path 'AD:\schema' because it does not exist. At line:1 char:3 + cd <<<< schema + CategoryInfo : ObjectNotFound: (AD:\schema:String) [Set-Location], ItemNotFoundException + FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.SetLocationCommand PS AD:\> cd Schema Set-Location : Cannot find path 'AD:\Schema' because it does not exist. (duplicate of previous error) PS AD:\> cd company Set-Location : Cannot find path 'AD:\company' because it does not exist. (duplicate of previous error) PS AD:\> ls Schema Get-ChildItem : Cannot find path '//RootDSE/Schema' because it does not exist. (duplicate of previous error) PS AD:\> cd ForestDnsZones Set-Location : Cannot find path 'AD:\ForestDnsZones' because it does not exist. (duplicate of previous error)

  Read the article

• Install MatroskaProp on Windows 7 x64

  - by Neophytos

  To see more information in Windows Explorer property pages and menus about Matroska Video (.mkv) files, similar to what one can see when selecting native Windows media (.avi, .asf, .wmv or even just plain old mpg) files, Matroska links (from http://www.matroska.org/downloads/windows.html) to a download of the MatroskaProp shell extension (http://www.jory.info/serendipity/archives/14-MatroskaProp-2.8-Released.html). It used to work for me under Windows XP 32-bit. Now I have Windows 7 x64, and downloaded, installed and ran it. Configuration and settings page is fine. But it does not seem to actually register any shell extension. Nothing is added to Explorer windows, menus or property pages when selecting .mkv or .mks files). I tried calling the register hook manually using regsvr32.dll, that again invoked the configuration window and let me set all options, and when confirming even said the registration succeeded, but seems to have had no effect. In the registry I cannot find any traces of the shell extension being installed. Can this extension be made to work under Windows 7 or x64 systems? Are there known problems with installing this or other old shell extensions on x64, or on Windows 7?

  Read the article

• Trying to install ffmpeg-php and having installation issues.

  - by dallasclark

  I've installed ffmpeg successfully using the ffmpeginstaller 3 series (http://www.ffmpeginstaller.com/download). ffmpeg is working fine without any known issues with bash. The ffmpeginstaller is meant to install ffmpeg-php but it cannot be found and I receive an error when I execute php -v PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/ffmpeg.so' - /usr/lib64/php/modules/ffmpeg.so: cannot open shared object file: No such file or directory in Unknown on line 0 Looking at the '/usr/lib64/php/modules/' folder, it doesn't contain the ffmpeg.so file. I've tried to install ffmpeg-php manually but I receive the following error checking for ffmpeg headers... configure: error: ffmpeg headers not found. Make sure you've built ffmpeg as shared libs using the --enable-shared option Should I install ffmpeg with series 4 or 5 of ffmpeginstaller or does someone know how to fix this issue? Thanks in advance ! System Specs cat /etc/redhat-release CentOS release 5.5 (Final) cat /proc/version Linux version 2.6.18-028stab068.5 (root@rhel5-64-build) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 php -v PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/ffmpeg.so' - /usr/lib64/php/modules/ffmpeg.so: cannot open shared object file: No such file or directory in Unknown on line 0 PHP 5.2.13 (cli) (built: Mar 2 2010 18:08:48) Copyright (c) 1997-2010 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2010 Zend Technologies Any other details you need, just let me know.

  Read the article

• Can VMWare Server 2.0 be useful in Production for easing backups?

  - by Keith Sirmons

  Howdy, Let's run this idea by the group here. I am thinking about using VMWare Server in production to host a 2008 Domain Controller with DHCP and DNS, a 2008 member server with WSUS, some virus software, and other "management" utilities a second 2008 member server with SQL, IIS, and File Shares for a medium business of 50-100 desktops. The reason I am leaning toward Server vs ESXi is for backup purposes. Using ESXi, if I want to backup the VM's, I would need a second server in the office with enough storage availability to hold a copy of the vmdks. I am wondering if putting this virtual environment on top of a basic 2008 server install will allow for easier backups to both tape and/or to offsite storage using JungleDisk. Can a snapshot be triggered easily via a scheduled job? I know this doesn't necessarily handle file level restores, but I want to make sure in a DR situation, we can restore production servers quickly. Does this concept hold water? Would a very minimum install of the 2008 Host remove too many resources from the actual production machines? This would be a new Dell 410 server with 12 GB ram and (6) 600 GB 15K in a RAID 6, Dual Intel Xeon 2.26GHz procs.

  Read the article

• Multiple contacts with shared information

  - by Keith Thompson

  Background: I currently have several hundred contacts, synchronized between a Microsoft Exchange server and several mobile devices. I also save exported copies of the contacts in .vcf format. Is there a good way (application, file format, whatever) to maintain contacts with shared information? A very common scenario is that I have contacts for two or more people who live in the same house, for example: John Doe 123 Main Street, Anytown USA Home: 555-555-1111 Work: 555-555-2222 Mobile: 555-555-3333 E-mail: [email protected] Jane Doe 123 Main Street, Anytown USA Home: 555-555-1111 Work: 555-555-4444 Mobile: 555-555-5555 E-mail: [email protected] As you can see, both contacts have the same home address and phone number, but distinct names and work and mobile phone numbers. (Other information might also be either shared or distinct.) The applications and file formats I'm familiar with don't seem to have a good way to deal with this. If I use a single "John & Jane Doe" contact for both, it's difficult to distinguish the distinct information (if I want to call Jane's mobile phone rather than John's). If I use a separate contact for each, I have to remember to update both of them (or all of them for N 2) when they move or change their home phone number. An ideal solution would let me create a record containing information for their household, and have each of their contact records contain a reference to the household record, so that when I view John's contact record I see both shared and distinct information. Is there anything out there that has good support this kind of thing? (I would think there would be, since it's a very common scenario.) (I suppose I could roll my own system that generates merged .vcf files from some extended format, but that wouldn't play well with synchronizing across multiple devices.)

  Read the article

• Windows 7 search doesn’t find text strings

  - by Hugh Tash

  I’m not able to find any text strings starting not from the beginning of word in filename or in file content using Windows 7 search. My Windows 7 search configuration: Let’s say I’m searching for a documents containing word “content”. I’m able to find those documents when searching for “content”, “conte”, “con” (as long as the string includes the beginning of the word). "content" "con" But if I search for “ontent”, “tent” or any other combination that doesn’t include the beginning of the word, Windows search won't find it. I've tried other indexing/searching software such as Copernic Desktop search, Google desktop search. Those programs also weren’t able to find part of the word starting from the middle of the word. For instance, it finds “conte”, but doesn’t find “onte”. Finds “conte” Doesn’t find “onte” I got the same problem using Copernic desktop search. On the other hand, when I use non-indexing content search software such as Agent Ransack or FileSeek, I get the same results when searching for “conte” or “onte”: “conte” “onte” Why do all pre-indexing content search applications (Windows search, Google desktop, Copernic desktop search) fail to search for a string inside the words? Why do non-indexing applications find text strings wherever they are: in the beginning, middle or end of the word? I’ve tried wildcards and other constructions with no luck. *onte onte “onte” content:onte content:onte content:~onte All these searched doesn’t find the word “content”. How can I make Windows search find strings from any part of words? Could you try these searches and see if they work for you? Or is this normal behavior? Thank you. Update: Using wildcards before or after "onte" doesn't find any results. content:~=onte doesn't find any results.

  Read the article

• Check for updates of a specific Debian package list

  - by Erwan Queffélec

  The setup I run a Debian Squeeze host that I use to build a multilanguage project (python, java, php...) and generate custom packages (debian and RPM) automatically (through jenkins) The problem The target distributions of those Debian packages are Etch, Lenny and Squeeze. But our project has some native dependencies that are available only through the DebianRelease + 1 repository (i.e Lenny + 1 == Squeeze, Squeeze + 1 == Wheezy). We for example, need the jetty packages from Squeeze in Lenny, and the cyrus-imapd-2.4 packages from Wheezy in Squeeze. Some additional info : Some package we can simply 'backport by hand' by mirroring the DebianRelease + 1 packages to our own repositories. For instance, the jetty package from Squeeze will run fine on Lenny because it doesn't need an s**tload of additional dependencies However we do need to rebuild some packages. For instance, cyrus-imapd-2.4 from Wheezy has a lot of unsatisfied dependencies on Squeeze. So we need to rebuild it in Squeeze and then upload it to our repo. The question I need to have a simple way of knowing if they are any updates on those extra packages (both "normal" and "security" updates). I could write a simple script that runs weekly, get some parameters from a file, and generate an update report. Let's say the file looks like this: jetty:squeeze cyrus-imapd-2.4:wheezy The script should run as normal user not to mess up the system apt configuration and issue the appropriate commands to generate that report. Does Debian has some built-in apt-* commands/options dedicated to that kind of problem I could use to write this script ? If not, can someone think of another clean solution to achieve what I need ?

  Read the article

• MSI Installer error 2203; how to force permissions on installer directory?

  - by goober

  [Cross-Posted on StackOverflow.com as well because the question relates to development. Feel free to let me know where it best belongs.] Hi all, I'll try to bullet-point to keep it short: Background / Issue Trying to install ASP.NET MVC 3 RC on my Windows 7 machine. Uninstalled other versions of MVC (2 and 3 Beta 1). Ran the installer -- got a generic error, 2203. Log files said that it was a permissions error on C:\Windows\Installer. Checked C:\Windows\Installer -- sure enough, it's marked as read-only. I un-checked "Read-Only" in the folder properties and applied. It appears to open the dialog and apply to all files. However, when clicking properties again, the read-only box is backed to checked. Checked the security tab of the folder -- both system and the Administrators group have full access. I checked ownership -- the Administrators group is listed as an owner. Verified that I'm in the system as an Administrator (in fact, the only account in the Administrators group besides Administrator). So, what gives? Thanks in advance for any help you can provide!

  Read the article

• "Windows detected a hard drive" issue in Windows 7 x64

  - by Jasiu

  I upgraded to the OCZ-Agility3 120GB from a 60 OCZ Vertex2 SSD. I cloned the drive from the Vertex to the new Agility. Everything seemed to have gone well and have not had any problems. Recently in the passed month I have gotten this error: I downloaded teh OCZToolboxMP and ran the SMART utility and don't see anything wrong: SMART READ DATA ModelNumber : OCZ-AGILITY3 Serial Number : OCZ-Y1945X77438P4NU6 WWN : 5-e8-3a-97 ebea5ba76 Revision: 10 Attributes List 1: SSD Raw Read Error Rate Normalized Rate: 70 total ECC and RAISE errors 5: SSD Retired Block Count Reserve blocks remaining: 100% 9: SSD Power-On Hours Total hours power on: 968 12: SSD Power Cycle Count Count of power on/off cycles: 28 171: SSD Program Fail Count Total number of Flash program operation failures: 0 172: SSD Erase Fail Count Total number of Flash erase operation failures: 0 174: SSD Unexpected power loss count Total number of unexpected power loss: 11 177: SSD Wear Range Delta Delta between most-worn and least-worn Flash blocks: 0 181: SSD Program Fail Count Total number of Flash program operation failures: 0 182: SSD Erase Fail Count Total number of Flash erase operation failures: 0 187: SSD Reported Uncorrectable Errors Uncorrectable RAISE errors reported to the host for all data access: 4145 194: SSD Temperature Monitoring Current: 30 High: 30 Low: 30 195: SSD ECC On-the-fly Count Normalized Rate: 120 196: SSD Reallocation Event Count Total number of reallocated Flash blocks: 100 201: SSD Uncorrectable Soft Read Error Rate Normalized Rate: 120 204: SSD Soft ECC Correction Rate (RAISE) Normalized Rate: 120 230: SSD Life Curve Status Current state of drive operation based upon the Life Curve: 100 231: SSD Life Left Approximate SDD life Remaining: 100% 241: SSD Lifetime writes from host lifetime writes 893 GB 242: SSD Lifetime reads from host lifetime reads 968 GB Does anyone have any ideas of what might be wrong and or how I can go about fixing this? Please let me know if there is other information I can provide. Thanks for your help Windows 7 x64 SP1 AMD Phenom II X4 940 8GB RAM

  Read the article

• How to tunnel a local port onto a remote server

  - by Trevor Rudolph

  I have a domain that i bought from DynDNS. I pointed the domain at my ip adress so i can run servers. The problem I have is that I don't live near the server computer... Can I use an ssh tunnel? As I understand it, this will let me access to my servers. I want the remote computer to direct traffic from port 8080 over the ssh tunnel to the ssh client, being my laptop's port 80. Is this possible? EDIT: verbose output of tunnel macbookpro:~ trevor$ ssh -R *:8080:localhost:80 -N [email protected] -v OpenSSH_5.2p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /Users/trevor/.ssh/config debug1: Reading configuration data /etc/ssh_config debug1: Connecting to site.com [remote ip address] port 22. debug1: Connection established. debug1: identity file /Users/trevor/.ssh/identity type -1 debug1: identity file /Users/trevor/.ssh/id_rsa type -1 debug1: identity file /Users/trevor/.ssh/id_dsa type 2 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'site.com' is known and matches the RSA host key. debug1: Found key in /Users/trevor/.ssh/known_hosts:9 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /Users/trevor/.ssh/identity debug1: Trying private key: /Users/trevor/.ssh/id_rsa debug1: Offering public key: /Users/trevor/.ssh/id_dsa debug1: Authentications that can continue: publickey,password debug1: Next authentication method: password [email protected]'s password: debug1: Authentication succeeded (password). debug1: Remote connections from *:8080 forwarded to local address localhost:80 debug1: Requesting [email protected] debug1: Entering interactive session. debug1: remote forward success for: listen 8080, connect localhost:80 debug1: All remote forwarding requests processed

  Read the article

• Attempting to update Amazon Route53 using a script, but domain is not being updated

  - by ks78

  I have several Amazon EC2 instances, running Ubuntu 10.04, with which I'd like to use Amazon's Route53. I setup a script as described in Shlomo Swidler's article, but I'm still missing something. When the script runs, it doesn't return any output, which I initially assumed meant it ran correctly. However, when I check the DNS records using MyR53DNS, there are no entries for my instances. Here's my script: #!/bin/tcsh -f set root=`dirname $0` setenv EC2_HOME /usr/lib/ec2-api-tools setenv EC2_CERT /etc/cron.route53/ec2_x509_cert.pem setenv EC2_PRIVATE_KEY /etc/cron.route53/ec2_x509_private.pem setenv AWS_ACCESS_KEY_ID myaccesskeyid setenv AWS_SECRET_ACCESS_KEY mysecretaccesskey /user/bin/ec2-describe-instances | \ perl -ne '/^INSTANCE\s+(i-\S+).*?(\S+\.amazonaws\.com)/ \ and do { $dns = $2; print "$1 $dns\n" }; /^TAG.+\sShortName\s+(\S+)/ \ and print "$1 $dns\n"' | \ perl -ane 'print "$F[0] CNAME $F[1] --replace\n"' | \ xargs -n 4 $/etc/cron.route53/cli53/cli53.py \ rrcreate -x 60 mydomain.com Does anyone see a problem with this script? If its not the script, what else could be preventing my Route53 domain from being updated? I am using the Security Groups to IP-restrict the instances. I've tried opening port 53, but that didn't seem to have an effect. Is there another port that Route53 uses? I'd appreciate any help or guidance the ServerFault community can offer. Let me know if you need any further info.

  Read the article

• Puppet classes out of order despite explicit arrow operator use

  - by Alexandr Kurilin

  Absolute puppet beginner here. I'm experiencing an interesting behavior with my puppet manifests and would love to know what I'm doing wrong. Let's for example say I'm configuring the instance with the following ordered classes: class { 'update_system': } -> class { 'facter': } -> class { 'user_sshkey': user => 'ubuntu', type => 'rsa', } -> class { 'tmux': user => 'ubuntu', } -> class { 'vim': user => 'ubuntu', } -> class { 'bashrc': user => 'ubuntu' } -> notify {"Configuring DB role":} -> class { 'postgresql': } when I run the manifest with the --debug switch, by looking at notify statements I can see the classes be executed in the following order: 1. update_system starts 2. a cron type inside of postgresql class (the very **last** class in that ordered list above) is executed 3. postgres::install starts 5. facter starts installing 6. postgres::configure and postgres::service start 7. the vim class is executed 8. "Configuring DB role" notification is made. All the way at the end here. etc Basically the thing is all over the place, the order doesn't seem to follow the arrow operators in any way. I'm guessing I'm missing something here that would force the classes to execute one at a time. Could it be that I'm missing some kind of anchor pattern here? Invalid containment?

  Read the article

• yum install php-devel amongst other commands returning problems

  - by user3791722

  I run yum install php-devel and it returns this. Typically I'd just run it with --skip-broken, but when I do, it still doesn't do the trick. Available: php-common-5.3.3-22.el6.x86_64 (rhel-x86_64-server-6) php-common(x86-64) = 5.3.3-22.el6 Available: php-common-5.3.3-23.el6_4.x86_64 (rhel-x86_64-server-6) php-common(x86-64) = 5.3.3-23.el6_4 Available: php-common-5.3.3-26.el6.x86_64 (rhel-x86_64-server-6) php-common(x86-64) = 5.3.3-26.el6 Available: php54w-common-5.4.29-2.w6.x86_64 (webtatic) php-common(x86-64) = 5.4.29-2.w6 Available: php54w-common-5.4.30-1.w6.x86_64 (webtatic) php-common(x86-64) = 5.4.30-1.w6 Available: php55w-common-5.5.13-2.w6.x86_64 (webtatic) php-common(x86-64) = 5.5.13-2.w6 Installing: php55w-common-5.5.14-1.w6.x86_64 (webtatic) php-common(x86-64) = 5.5.14-1.w6 You could try using --skip-broken to work around the problem When run with --skip-broken it returns this at the end: Packages skipped because of dependency problems: autoconf-2.63-5.1.el6.noarch from rhel-x86_64-server-6 automake-1.11.1-4.el6.noarch from rhel-x86_64-server-6 pcre-devel-7.8-6.el6.x86_64 from rhel-x86_64-server-6 php-5.3.3-27.el6_5.1.x86_64 from rhel-x86_64-server-6 php-cli-5.3.3-27.el6_5.1.x86_64 from rhel-x86_64-server-6 php-common-5.3.3-27.el6_5.1.x86_64 from rhel-x86_64-server-6 php-mysql-5.3.3-27.el6_5.1.x86_64 from rhel-x86_64-server-6 php-pdo-5.3.3-27.el6_5.1.x86_64 from rhel-x86_64-server-6 php-soap-5.3.3-27.el6_5.1.x86_64 from rhel-x86_64-server-6 php55w-cli-5.5.14-1.w6.x86_64 from webtatic php55w-common-5.5.14-1.w6.x86_64 from webtatic php55w-devel-5.5.14-1.w6.x86_64 from webtatic This problem has arisen with a few other similar commands when installing something related to php, except I've just done without them. I need to install this for something I'm trying to do. I do remember upgrading to PHP 5.4 and our entire infrastructure coming down due to it requiring PHP 5.3, so I downgraded as quick as possible to get everything back running and that may contribute to the issue. If you have any idea why this is happening and how I could get the package on the system while remaining on PHP 5.3, please let me know. Thanks.

  Read the article

• Endian Destination NAT

  - by Ben Swinburne

  I have installed Endian Community Firewall 2.3 and am clearly misunderstanding/doing something wrong with it. I'm trying to create some destination NAT rules to allow incoming connections to various services within the network. Router - RED I/F - x.x.x.x Router - GREEN I/F - 192.168.11.253 ECF - RED I/F - 192.168.11.254/24 ECF - GREEN I/F - 192.168.12.254/24 Target server - 192.168.12.1 Please ignore the haphazard choice of subnets and addresses- I'm trying to quickly plop Endian into an existing network before a complete rework in 6-12 months so for now. Everything works except destination NAT, so outgoing connections are fine, the routes between the two subnets are OK etc. I want to create various incoming NATs but let's take for the sake of argument, SMTP port 25 from the Internet to Target server 192.168.12.1. I've tried almost every combination of options in the Destination NAT section to achieve this and clearly am doing something wrong. I suspect my confusion must be somewhere in the Access From and/or Target section. The rest seems OK Filter Policy = Allow Service = SMTP Protocol = TCP Port = 25 Translate to type = IP DNAT Policy = NAT Insert IP = 192.168.12.1 Port Range = 25 Enabled = Checked Position = First I can't work out what I'm doing wrong, or am I doing it right and it's just not working!? Any help would be greatly appreciated.

  Read the article

• Ubuntu: package installed, but files missing?

  - by jeckyll2hide

  I have been playing around with the /etc/asterisk directory, installing the related pacakge (asterisk-config), removing it, removing the directory manually (just playing around to get the configuration synced to my configuration repo). Now I just want to reinstall the official package, so I do: root@tethys:/etc# apt-get install asterisk-config root@tethys:/etc# tree asterisk/ asterisk/ +-- manager.d What?! Empty?!? Have I installed it? root@tethys:/etc# dpkg --get-selections | grep asterisk asterisk install asterisk-config install asterisk-core-sounds-en install asterisk-core-sounds-en-gsm install asterisk-modules install asterisk-moh-opsound-gsm install asterisk-voicemail install Indeed! Let me check the contents of the package: root@tethys:/etc# dpkg -L asterisk-config ... /etc /etc/asterisk /etc/asterisk/res_snmp.conf /etc/asterisk/dbsep.conf /etc/asterisk/cel_custom.conf /etc/asterisk/cel.conf /etc/asterisk/meetme.conf /etc/asterisk/jingle.conf /etc/asterisk/queuerules.conf ... So, what have I done that the package will get installed, but the contents are nowhere to be seen? And, more importantly, how can I force the contents to be installed, no matter what I have done before?

  Read the article

• Router slowing my connection?

  - by Roberto

  I have a Linksys WRT54G and I pay for a 12Mbps connection. I've been testing my connection using speedtest.net for many days and always get 8Mbps. I called the support and they told me to bypass the router and test. I did it and got 16Mbps (much more than I pay for), so I thought "this guy just changed my speed so can he blame my router", and he blamed it. But to my surprise, everytime I bypass the router I get 16Mbps and when I use the router I get 8Mbps. Is this guy trolling me somehow (configuring the VOIP-modem-stuff to different profiles depending o the MAC address connecting to it) or is my router a POS? How can I find out? I don't know what's the thing the router connects to, it's a kind of VOIP adapter; the link is this one, but unfortunately I don't think you'll understand because it's in Portuguese. I know they can remotely connect to it, that's the origin of my conspiracy theory :) I just tested wired to the router and got 10Mbps (and still 8Mbps on wifi and 16Mbps without router) O_o I'm 5cm away from my router, so no obstacles to interfere, right? ------ UPDATE ------- It's a WRT54G V8, I'm using firmware v8.00.7 (will install 8.00.8 tomorrow, but I saw that it's only a minor fix to UPnP denial of service security vulnerability). Results: IPerf LAN-LAN: 80Mbps IPerf LAN-WLAN: 19Mbps (therefore we can ignore wireless issues/settings) I wasn't able to make the (W)LAN-WAN NAT-enabled test with IPerf, I get a connection refused error. I'm not sure if did it right: ran in server mode, configured router to forward that port to my IP and tried to connect to my internet IP that got from this site. I don't think there is a way to disable NAT using this firmware. Question: Let's suppose it's an underpowered hardware issue. Is it right to assume that custom firmwares could resolve the issue because they are possibly better implemented and would make better use of the router resources? I couldn't find any references pointing to wired performance improvements with the use of custom firmware.

  Read the article

• How do I add a VMware ESXi Host to Microsoft Virtual Machine Manager?

  - by user63250

  I am trying to manage virtual machines running on a VMware ESXi host using Microsoft System Center Virtual Machine Manager. I was able to add the ESXi machine using the "Add VMware VirtualCenter server" option, but can't access any of the VMs on the datastore associated with this ESXi server. The datastore of the ESXi box is showing up with the correct name, but it won't let me see any of the VMs that have already been created; I get "There are no virtual machines on this host." Because I couldn't get any of the existing virtual machines to show up, I tried creating some new ones. When using VMM to connect to ESXi and create new VMs, I get the following error messages in the "rating explanation" section: The virtualization software on the selected host does not support virtual hard disks on an IDE bus. and The virtualization software on the host XXXXXX does not support the creation of dynamic virtual hard disk. Any ideas on why I can't manage existing machines and why I can't create new ones? The existing machines were created in vSphere. I should note that the ESXi server and the server running SCVMM are both on the same domain. I should also note that although the ESXi box has been added as a VirtualCetner server, when I try to add it through the "Add Host" option, I get an error message saying "Virtual Machine Manager cannot complete the VirtualCenter action on server EXSi because of the following error: The operation is not supported on the object."

  Read the article

• mod_rewrite: redirect from subdomain to main domain

  - by Bald

  I have two domains - domain.com and forum.domain.com that points to the same directory. I'd like redirect all request from forum.domain.com to domain.com (for example: forum.domain.com/foo to domain.com/forum/foo) without changing address in addres bar (hidden redirect). I wrote something like this and put it into .htaccess file: Options +FollowSymlinks RewriteEngine on RewriteCond %{HTTP_HOST} ^forum\.example\.net$ RewriteRule (.*) http://example.com/forum/$1 [L] RewriteCond %{REQUEST_FILENAME} !-s [NC] RewriteCond %{REQUEST_FILENAME} !-d [NC] RewriteRule ^(.+) index.php/$1 [L] That works only if I add Redirect directive: RewriteRule (.*) http://example.com/forum/$1 [R,L] But it changes previous address in address bar. EDIT: Ok, let's make it simple. I added those two lines at the end of the c:\windows\system32\drivers\etc\hosts on my local computer: 127.0.0.3 foo.net 127.0.0.3 forum.foo.net Now, I created two virtual hosts: <VirtualHost foo.net:80> ServerAdmin [email protected] ServerName foo.net DocumentRoot "C:/usr/src/foo" </VirtualHost> <VirtualHost forum.foo.net:80> ServerAdmin [email protected] ServerName forum.foo.net DocumentRoot "C:/usr/src/foo" </VirtualHost> ..and directory called "foo", where i put two files: .htaccess and index.php. Index.php: <?php echo $_SERVER['PATH_INFO']; ?> .htaccess: Options +FollowSymlinks RewriteEngine on RewriteBase / RewriteCond %{HTTP_HOST} ^forum\.foo\.net$ RewriteCond %{REQUEST_URI} !^/forum/ RewriteCond %{REQUEST_FILENAME} !-s [NC] RewriteCond %{REQUEST_FILENAME} !-d [NC] RewriteRule ^(.+)$ /index.php/forum/$1 [L] RewriteCond %{HTTP_HOST} !^forum\.foo\.net$ RewriteCond %{REQUEST_FILENAME} !-s [NC] RewriteCond %{REQUEST_FILENAME} !-d [NC] RewriteRule ^(.+) index.php/$1 [L] When I type address http://forum.foo.net/test in address bar, it displays /forum/test which is good. http://foo.net/a/b/c shows /a/b/c which is good. But! http://forum.foo.net/ displays empty value (should display /forum).

  Read the article

• What is the best keyboard for typing speed (not layouts)

  - by Gapton

  So I am a programmer, and I like playing typing speed games. My typing speed is, for common English words, 85 to 90 wpm, max 95. I type on various devices, my laptop, desktop, office pc.... they all have slightly different keyboards. Being a curious programmer, I wonder what types of keyboard is used for the highest possible typing speed. Or let me phrase it in another way, what is the type of keyboards that people use in typing speed contest? Here is something I know that I feel like I can share: It must be a wired keyboard, I can feel the lag as I am typing this on my wireless keyboard, even if it is a slightly more expensive model which claims to have zero lag. I know people prefer a mechanical keyboard, for the hepatic feedback, however I have not tried one. It lasts longer and is noisy, it also does not have the problem of normal keyboards where you press many keys at a time the signals will get all jammed and the computer will only receive one or two keys. I personally prefer those "thin profile" keyboards. I type a lot, and 95 wpm put me in the top 5%, this is of course just on a gaming site. However when I type on the fat keyboards, my fingers have to travel a much longer distance before the keys actually click. This is where I find myself typing much faster with those thin profile keyboards found on my laptop. Because my fingers only hover on the keys and I only need to press a short distance, each stroke takes less force and light rapid strokes is what makes me type fast. When I type on a fat keyboard, I was forced to use heavy strokes, and this slows me down. There must be some people out there who are keyboard scientists, who actually do experiments and user tests with different setups. It would be interesting to understand more about the things we use everyday for not just work but a majority of our communications. P.S. this is about hardware and not about switching keyboard layouts to dvorak

  Read the article

• PBS batch jobs - the qalter command

  - by Ryan Budney

  I've got a giant computation running on a Scientific Linux cluster. At present I have over 600 jobs parked in the queue, waiting for processor time, while a few are running. I'm trying to use the qalter command on some of the idle but scheduled jobs. I'd like to schedule them for a later time, so that other users can jump part of the queue, sort of as an act of politeness. Is this doable? For example, JOBNAME 292399 is currently idle, scheduled to be run whenever a spot in the queue opens up. But if I run qalter -a 10051000 292398 followed by qrerun 292398 I get qrerun: Request invalid for state of job 292398.euler. From the qalter documentation, I thought 10051000 refers to tomorrow (oct 5th, 10am) but perhaps I'm misunderstanding something? If I'm going about this the wrong way, please let me know. The main thing I'm looking for is a command that's easily scriptable, so that I can modify when my queued tasks get run. qalter seems good for those purposes if I can get it working. I'd rather avoid running qdel and re qsubbing the computations, as there's a bookkeeping issue on which tasks to restart (vs which ones not to). I want to avoid that kind of bookkeeping. From googling around I notice some qalter commands have rather different date formats, but the above appears to be correct, as far as I can tell from the man docs. Any help would be appreciated.

  Read the article

< Previous Page | 491 492 493 494 495 496 497 498 499 500 501 502  | Next Page >