Search Results

Search found 13275 results on 531 pages for 'deep copy'.

Page 496/531 | < Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >

• What web platform is right for me?

  - by egervari

  I've been looking at web frameworks like Rails, Grails, etc. I'm used to doing applications in Spring Framework with Hibernate... and I want something more productive. One of the things I realized is that while some of the things in Grails is sexy, there are some serious problems with it. Grails' controllers: 1) are implemented awfully. They don't seem to be able to extend from super classes at runtime. I tried this to add base actions and helper methods, and this seems to cause grails to blow up. 2) are based on an obsolete request parameters model (rather than form backing objects, which are much nicer). 3) are hard to test. Command objects are treated totally differently... and it's actually MUCH harder to write the test than it is to write the controller code. 4) Command objects operate totally differently. They are pre-validated and bound, which causes a lot of inconsistencies than basic parameter model. 5) Command objects are not reusable, and it's a pain in the rear to reuse most of the stuff from the domain classes, like constraints and fields. This is TRIVIAL to do in basic Spring. Why the hell was it not trivial to do in Grails? 6) The scaffolding that is generated is pure crap. It doesn't generalize inserts and updates... and it actually copy/pastes a pile of code in two views: create.gsp and edit.gsp. The views themselves are gargantuan piles of doggie do-do. This is further compounded by the fact that it uses low-level parameters and not objects. Integration tests are 30x slower than a Spring integration test. It is disgusting. Some mocking tests are so hard to write and aren't guaranteed to work when it's deployed, that I think it discourages fast, tdd test cycles. Most things seem to screw up grails while it's running, like adding a taglib, or anything really. The server restart problem wasn't solved at all. I'm starting to think going with Spring/Hibernate/Java is the only way to go. While there is a pretty big cost at startup, I know it'll eventually smooth out. It sucks I can't use a language like Scala... because idiomatically, it is so incompatible with Hibernate. This app is also not a run-of-the-mill UI over a database. It's got some of that, but it's not going to be a slouch. I am deathly scared of Grails now because of how crap it is in the Controller layer. Suggestions on what I can do?

  Read the article

• Java: Making concurrent MySQL queries from multiple clients synchronised

  - by Misha Gale

  I work at a gaming cybercafe, and we've got a system here (smartlaunch) which keeps track of game licenses. I've written a program which interfaces with this system (actually, with it's backend MySQL database). The program is meant to be run on a client PC and (1) query the database to select an unused license from the pool available, then (2) mark this license as in use by the client PC. The problem is, I've got a concurrency bug. The program is meant to be launched simultaneously on multiple machines, and when this happens, some machines often try and acquire the same license. I think that this is because steps (1) and (2) are not synchronised, i.e. one program determines that license #5 is available and selects it, but before it can mark #5 as in use another copy of the program on another PC tries to grab that same license. I've tried to solve this problem by using transactions and table locking, but it doesn't seem to make any difference - Am I doing this right? Here follows the code in question: public LicenseKey Acquire() throws SmartLaunchException, SQLException { Connection conn = SmartLaunchDB.getConnection(); int PCID = SmartLaunchDB.getCurrentPCID(); conn.createStatement().execute("LOCK TABLE `licensekeys` WRITE"); String sql = "SELECT * FROM `licensekeys` WHERE `InUseByPC` = 0 AND LicenseSetupID = ? ORDER BY `ID` DESC LIMIT 1"; PreparedStatement statement = conn.prepareStatement(sql); statement.setInt(1, this.id); ResultSet results = statement.executeQuery(); if (results.next()) { int licenseID = results.getInt("ID"); sql = "UPDATE `licensekeys` SET `InUseByPC` = ? WHERE `ID` = ?"; statement = conn.prepareStatement(sql); statement.setInt(1, PCID); statement.setInt(2, licenseID); statement.executeUpdate(); statement.close(); conn.commit(); conn.createStatement().execute("UNLOCK TABLES"); return new LicenseKey(results.getInt("ID"), this, results.getString("LicenseKey"), results.getInt("LicenseKeyType")); } else { throw new SmartLaunchException("All licenses of type " + this.name + "are in use"); } }

  Read the article

• DLL configuration file in asp.net site

  - by Tominator

  Hi, I've made a .net 2.0 librabry project, that results in a dll. I've made an app.config file in my project, with settings used in the dll, with the intention that they can be changed later. I'm attempting to use the dll in an asp.net web application now, so I made the reference to my other project's output, and I see that the dll is copied over to the site's bin folder, and everything works. However, the configuration file is not copied. When I manually copy the app.config and rename it to myDll.config, it has no influence. The contents of the config file is approximately this: <?xml version="1.0" encoding="utf-8" ?> <configuration> <configSections> <sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" > <section name="myDLL.My.MySettings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" /> </sectionGroup> </configSections> <applicationSettings> <myDLL.My.MySettings> <setting name="myDLL_webservice_Service" serializeAs="String"> <value>https://myhost/Service.asmx</value> </setting> <setting name="ID" serializeAs="String"> <value>6</value> </setting> </myDLL.My.MySettings> </applicationSettings> </configuration> And I use its settings in the dll with this (vb.net code): Private _id As Long = My.Settings.ID How can I put my config information somewhere so it can be used? In the web.config of the site application? That has only the appSettings section, and it uses the syntax. It doesn't appear to work though. In a custom file format that I create and use? Not that pretty..

  Read the article

• Why did File::Find finish short of completely traversing a large directory?

  - by Stan

  A directory exists with a total of 2,153,425 items (according to Windows folder Properties). It contains .jpg and .gif image files located within a few subdirectories. The task was to move the images into a different location while querying each file's name to retrieve some relevant info and store it elsewhere. The script that used File::Find finished at 20462 files. Out of curiosity I wrote a tiny recursive function to count the items which returned a count of 1,734,802. I suppose the difference can be accounted for by the fact that it didn't count folders, only files that passed the -f test. The problem itself can be solved differently by querying for file names first instead of traversing the directory. I'm just wondering what could've caused File::Find to finish at a small fraction of all files. The data is stored on an NTFS file system. Here is the meat of the script; I don't think including DBI stuff would be relevant since I reran the script with nothing but a counter in process_img() which returned the same number. find(\&process_img, $path_from); sub process_img { eval { return if ($_ eq "." or $_ eq ".."); ## Omitted querying and composing new paths for brevity. make_path("$path_to\\img\\$dir_area\\$dir_address\\$type"); copy($File::Find::name, "$path_to\\img\\$dir_area\\$dir_address\\$type\\$new_name"); }; if ($@) { print STDERR "eval barks: $@\n"; return } } And here is another method I used to count files: count_images($path_from); sub count_images { my $path = shift; opendir my $images, $path or die "died opening $path"; while (my $item = readdir $images) { next if $item eq '.' or $item eq '..'; $img_counter++ && next if -f "$path/$item"; count_images("$path/$item") if -d "$path/$item"; } closedir $images or die "died closing $path"; } print $img_counter;

  Read the article

• Calling CryptUIWizDigitalSign from .NET on x64

  - by Joe Kuemerle

  I am trying to digitally sign files using the CryptUIWizDigitalSign function from a .NET 2.0 application compiled to AnyCPU. The call works fine when running on x86 but fails on x64, it also works on an x64 OS when compiled to x86. Any idea on how to better marshall or call from x64? The Win32exception returned is "Error encountered during digital signing of the file ..." with a native error code of -2146762749. The relevant portion of the code are: [StructLayout(LayoutKind.Sequential)] public struct CRYPTUI_WIZ_DIGITAL_SIGN_INFO { public Int32 dwSize; public Int32 dwSubjectChoice; [MarshalAs(UnmanagedType.LPWStr)] public string pwszFileName; public Int32 dwSigningCertChoice; public IntPtr pSigningCertContext; [MarshalAs(UnmanagedType.LPWStr)] public string pwszTimestampURL; public Int32 dwAdditionalCertChoice; public IntPtr pSignExtInfo; } [DllImport("Cryptui.dll", CharSet=CharSet.Unicode, SetLastError=true)] public static extern bool CryptUIWizDigitalSign(int dwFlags, IntPtr hwndParent, string pwszWizardTitle, ref CRYPTUI_WIZ_DIGITAL_SIGN_INFO pDigitalSignInfo, ref IntPtr ppSignContext); CRYPTUI_WIZ_DIGITAL_SIGN_INFO digitalSignInfo = new CRYPTUI_WIZ_DIGITAL_SIGN_INFO(); digitalSignInfo = new CRYPTUI_WIZ_DIGITAL_SIGN_INFO(); digitalSignInfo.dwSize = Marshal.SizeOf(digitalSignInfo); digitalSignInfo.dwSubjectChoice = 1; digitalSignInfo.dwSigningCertChoice = 1; digitalSignInfo.pSigningCertContext = pSigningCertContext; digitalSignInfo.pwszTimestampURL = timestampUrl; digitalSignInfo.dwAdditionalCertChoice = 0; digitalSignInfo.pSignExtInfo = IntPtr.Zero; digitalSignInfo.pwszFileName = filepath; CryptUIWizDigitalSign(1, IntPtr.Zero, null, ref digitalSignInfo, ref pSignContext)); And here is how the SigningCertContext is retrieved (minus various error handling) public IntPtr GetCertContext(String pfxfilename, String pswd) IntPtr hMemStore = IntPtr.Zero; IntPtr hCertCntxt = IntPtr.Zero; IntPtr pProvInfo = IntPtr.Zero; uint provinfosize = 0; try { byte[] pfxdata = PfxUtility.GetFileBytes(pfxfilename); CRYPT_DATA_BLOB ppfx = new CRYPT_DATA_BLOB(); ppfx.cbData = pfxdata.Length; ppfx.pbData = Marshal.AllocHGlobal(pfxdata.Length); Marshal.Copy(pfxdata, 0, ppfx.pbData, pfxdata.Length); hMemStore = Win32.PFXImportCertStore(ref ppfx, pswd, CRYPT_USER_KEYSET); pswd = null; if (hMemStore != IntPtr.Zero) { Marshal.FreeHGlobal(ppfx.pbData); while ((hCertCntxt = Win32.CertEnumCertificatesInStore(hMemStore, hCertCntxt)) != IntPtr.Zero) { if (Win32.CertGetCertificateContextProperty(hCertCntxt, CERT_KEY_PROV_INFO_PROP_ID, IntPtr.Zero, ref provinfosize)) pProvInfo = Marshal.AllocHGlobal((int)provinfosize); else continue; if (Win32.CertGetCertificateContextProperty(hCertCntxt, CERT_KEY_PROV_INFO_PROP_ID, pProvInfo, ref provinfosize)) break; } } finally { if (pProvInfo != IntPtr.Zero) Marshal.FreeHGlobal(pProvInfo); if (hMemStore != IntPtr.Zero) Win32.CertCloseStore(hMemStore, 0); } return hCertCntxt; }

  Read the article

• C++: get const or non-const reference type from trait

  - by maciekp

  I am writing a functor F which takes function of type void (*func)(T) and func's argument arg. Then functor F calls func with arg. I would like F not to copy arg, just to pass it as reference. But then I cannot simply write "void F(void (*func)(T), T&)" because T could be a reference. So I am trying to write a trait, which allows to get proper reference type of T: T -> T& T& -> T& const T -> const T& const T& -> const T& I come up with something like this: template<typename T> struct type_op { typedef T& valid_ref_type; }; template<typename T> struct type_op<T&> { typedef typename type_op<T>::valid_ref_type valid_ref_type; }; template<typename T> struct type_op<const T> { typedef const T& valid_ref_type; }; template<typename T> struct type_op<const T&> { typedef const T& valid_ref_type; }; Which doesn't work for example for void a(int x) { std::cout << x << std::endl; } F(&a, 7); Giving error: invalid initialization of non-const reference of type ‘int&’ from a temporary of type ‘int’ in passing argument 2 of ‘void f(void (*)(T), typename type_op::valid_ref_type) [with T = int]’ How to get this trait to work?

  Read the article

• What alternatives do I have for source control and does GIT does that?

  - by RubberDuck

  I work as a freelancer programmer for some clients and also create apps for myself. When I work for myself, obviously I work alone. I generally don't work in a linear way. My big problems today are: I have a lot of apps that use the same classes I have developed; In the past, I put all these common classes on a directory outside all projects and included them on my apps using absolute paths, but this method sucks because by accident (if you forget) you may change a path or the disk and all projects are broken. Then I decided to copy those classes to my projects every time. Because the majority of these classes do not change frequently, I am relatively ok, but when they change, I am in hell; When I change one of these classes I have to propagate the changes to all other apps using copies of them. I have also tried to create frameworks but thanks to Apple, I cannot create frameworks for iOS and have to create libraries and bundles and create a nightmare of paths from one to the other and to the project to make that sh!t works. So, I am done with frameworks/libraries on Xcode until Xcode is a decent IDE. So, I see I need something better to manage my source code. What I need is this (I never used GIT on Xcode. I have read Apple docs but I still have these points): does git locally on Xcode allows me to deal with assets or just code? Can I have the equivalent of a "framework" (code + assets) managed by git locally? Can an entire xcodeproj be managed as a unity? I mean, Suppose I have a xcodeproj created and want GIT to manage it. How do I enable git on a project that was created without it and start designating files for management. (I have enabled git on Xcode's preferences, but all source control menu is grayed out). Is git the best option? Do I have another? Remember that my main condition is that the files should stay on the local computer. Please save me (I am a bit dramatic today). Thanks.

  Read the article

• Visual studio 2010 colourizers, intellisense and the rest. Where to start!!

  - by Owen

  Ok, before I begin I realize that there is a lot of documentation on this subject but I have thus far failed to get even basic colourization working for VS2010. My goal is to simply get to a point where I can open a document and everything is coloured red, from here I can implement the relevant parsing logic. Here's what I have tried/found: 1) Downloaded all the relevent SDK's and such- Found the ook sample (http://code.msdn.microsoft.com/ookLanguage) - didn't build, didn't work. 2) Knowing almost nothing about MEF read through "Implementing a Language Service By Using the Managed Package Framework" - http://msdn.microsoft.com/en-us/library/bb166533(v=VS.100).aspx This was pretty much a copy and paste of all the basic stuff here, and also updating some references which were out of date with the sample see: http://social.msdn.microsoft.com/Forums/en-US/vsx/thread/a310fe67-afd2-4592-b295-3fc86fec7996 Now, I have got to a point where when running the package MEF appears to have hooked up correctly (I know this because with the debugger open I can see that the packages initialize and FDoIdle methods are being hit). When I open a file of the extension I have registered with the ProvideLanguageExtensionAttribute everything dies as if in an endless loop, yet no debug symbols hit (though they are loaded). Looking at the ook sample and the MEF examples they seem to be totally different approaches to the same problem. In the ook sample there are notions of Clasifications and Completion controllers which aren't mentioned in the MEF example. Also, they don't seem to create a Package or Language service, so I have no idea how it should work? With the MEF example, my assumption is that I need to hook into the "IScanner.ScanTokenAndProvideInfoAboutIt" to provide syntax highlighting? Which would be fine if I could ever hit this method. So my first question I guess is which approach should I be taking here? Or do they both somehow tie together? My second questions is, where can I find a basic fully working project that implements bog standard basic syntax highlighting and intellisense or VS2010? Thirdly, in the MEF example when I created a Package there were a bunch of test projects created for me. I appears that the integration tests launch the VS2010 test rig somehow, but the test fails. It would be good to write my service with tests but I have no idea what/how I can test each interaction so any references to testing Language services would be helpful. Finally, please throw any resource/book links my way that I may find useful. Cheers, Chris. N.B. Sorry I realize this is part question part rant, but I have never been so confused.

  Read the article

• WCF App using Peer Chat app as example does not work.

  - by splate

  I converted a VB .Net 3.5 app to use peer to peer WCF using the available Microsoft example of the Chat app. I made sure that I copied the app.config file for the sample(modified the names for my app), added the appropriate references. I followed all the tutorials and added the appropriate tags and structure in my app code. Everything runs without any errors, but the clients only get messages from themselves and not from the other clients. The sample chat application does run just fine with multiple clients. The only difference I could find is that the server on the sample is targeting the framework 2.0, but I assume that is wrong and it is building it in at least 3.0 or the System.ServiceModel reference would break. Is there something that has to be registered that the sample is doing behind the scenes or is the sample a special project type? I am confused. My next step is to copy all my classes and logic from my app to the sample app, but that is likely a lot of work. Here is my Client App.config: <client><endpoint name="thldmEndPoint" address="net.p2p://thldmMesh/thldmServer" binding="netPeerTcpBinding" bindingConfiguration="PeerTcpConfig" contract="THLDM_Client.IGameService"></endpoint></client> <bindings><netPeerTcpBinding> <binding name="PeerTcpConfig" port="0"> <security mode="None"></security> <resolver mode="Custom"> <custom address="net.tcp://localhost/thldmServer" binding="netTcpBinding" bindingConfiguration="TcpConfig"></custom> </resolver> </binding></netPeerTcpBinding> <netTcpBinding> <binding name="TcpConfig"> <security mode="None"></security> </binding> </netTcpBinding> </bindings> Here is my server App.config: <services> <service name="System.ServiceModel.PeerResolvers.CustomPeerResolverService"> <host> <baseAddresses> <add baseAddress="net.tcp://localhost/thldmServer"/> </baseAddresses> </host> <endpoint address="net.tcp://localhost/thldmServer" binding="netTcpBinding" bindingConfiguration="TcpConfig" contract="System.ServiceModel.PeerResolvers.IPeerResolverContract"> </endpoint> </service> </services> <bindings> <netTcpBinding> <binding name="TcpConfig"> <security mode="None"></security> </binding> </netTcpBinding> </bindings> Thanks ahead of time.

  Read the article

• Objective-C memory management issue

  - by Toby Wilson

  I've created a graphing application that calls a web service. The user can zoom & move around the graph, and the program occasionally makes a decision to call the web service for more data accordingly. This is achieved by the following process: The graph has a render loop which constantly renders the graph, and some decision logic which adds web service call information to a stack. A seperate thread takes the most recent web service call information from the stack, and uses it to make the web service call. The other objects on the stack get binned. The idea of this is to reduce the number of web service calls to only those appropriate, and only one at a time. Right, with the long story out of the way (for which I apologise), here is my memory management problem: The graph has persistant (and suitably locked) NSDate* objects for the currently displayed start & end times of the graph. These are passed into the initialisers for my web service request objects. The web service call objects then retain the dates. After the web service calls have been made (or binned if they were out of date), they release the NSDate*. The graph itself releases and reallocates new NSDates* on the 'touches ended' event. If there is only one web service call object on the stack when removeAllObjects is called, EXC_BAD_ACCESS occurs in the web service call object's deallocation method when it attempts to release the date objects (even though they appear to exist and are in scope in the debugger). If, however, I comment out the release messages from the destructor, no memory leak occurs for one object on the stack being released, but memory leaks occur if there are more than one object on the stack. I have absolutely no idea what is going wrong. It doesn't make a difference what storage symantics I use for the web service call objects dates as they are assigned in the initialiser and then only read (so for correctness' sake are set to readonly). It also doesn't seem to make a difference if I retain or copy the dates in the initialiser (though anything else obviously falls out of scope or is unwantedly released elsewhere and causes a crash). I'm sorry this explanation is long winded, I hope it's sufficiently clear but I'm not gambling on that either I'm afraid. Major big thanks to anyone that can help, even suggest anything I may have missed?

  Read the article

• How to replace an object in an NSMutableArray at a given index with a new object

  - by shakeelw

  Hi guys. I have an NSMutableArray object(retained, synthesized as all) that is initiated just fine and I can easily add objects to it using the 'addObject:' method. But if I want to replace an object at a certain index with a new one in that NSMutableArray, it doesn't work. For example: ClassA.h @interface ClassA : NSObject { NSMutableArray *list; } @property (nonatomic, copy, readwrite) NSMutableArray *list; end ClassA.m import "ClassA.h" @implementation ClassA @synthesize list; (id)init { [super init]; NSMutableArray *localList = [[NSMutableArray alloc] init]; self.list = localList; [localList release]; //Add initial data [list addObject:@"Hello "]; [list addObject:@"World"]; } // Custom set accessor to ensure the new list is mutable (void)setList:(NSMutableArray *)newList { if (list != newList) { [list release]; list = [newList mutableCopy]; } } -(void)updateTitle:(NSString *)newTitle:(NSString *)theIndex { int i = [theIndex intValue]-1; [self.list replaceObjectAtIndex:i withObject:newTitle]; NSLog((NSString *)[self.list objectAtIndex:i]); // gives the correct output } However, the change remains true only inside the method. from any other method, the NSLog((NSString *)[self.list objectAtIndex:i]); gives the same old value. How can I actually get the old object replaced with the new one at a specific index so that the change can be noticed from within any other method as well. I even modified the method like this, but the result is the same: -(void)updateTitle:(NSString *)newTitle:(NSString *)theIndex { int i = [theIndex intValue]-1; NSMutableArray *localList = [[NSMutableArray alloc] init]; localList = [localList mutableCopy]; for(int j = 0; j < [list count]; j++) { if(j == i) { [localList addObject:newTitle]; NSLog(@"j == 1"); NSLog([NSString stringWithFormat:@"%d", j]); } else { [localList addObject:(NSString *)[self.list objectAtIndex:j]]; } } [self.list release]; //self.list = [localList mutableCopy]; [self setList:localList]; [localList release]; } Please help out guys :)

  Read the article

• Derived template override return type of member function C++

  - by Ruud v A

  I am writing matrix classes. Take a look at this definition: template <typename T, unsigned int dimension_x, unsigned int dimension_y> class generic_matrix { ... generic_matrix<T, dimension_x - 1, dimension_y - 1> minor(unsigned int x, unsigned int y) const { ... } ... } template <typename T, unsigned int dimension> class generic_square_matrix : public generic_matrix<T, dimension, dimension> { ... generic_square_matrix(const generic_matrix<T, dimension, dimension>& other) { ... } ... void foo(); } The generic_square_matrix class provides additional functions like matrix multiplication. Doing this is no problem: generic_square_matrix<T, 4> m = generic_matrix<T, 4, 4>(); It is possible to assign any square matrix to M, even though the type is not generic_square_matrix, due to the constructor. This is possible because the data does not change across children, only the supported functions. This is also possible: generic_square_matrix<T, 4> m = generic_square_matrix<T, 5>().minor(1,1); Same conversion applies here. But now comes the problem: generic_square_matrix<T, 4>().minor(1,1).foo(); //problem, foo is not in generic_matrix<T, 3, 3> To solve this I would like generic_square_matrix::minor to return a generic_square_matrix instead of a generic_matrix. The only possible way to do this, I think is to use template specialisation. But since a specialisation is basically treated like a separate class, I have to redefine all functions. I cannot call the function of the non-specialised class as you would do with a derived class, so I have to copy the entire function. This is not a very nice generic-programming solution, and a lot of work. C++ almost has a solution for my problem: a virtual function of a derived class, can return a pointer or reference to a different class than the base class returns, if this class is derived from the class that the base class returns. generic_square_matrix is derived from generic_matrix, but the function does not return a pointer nor reference, so this doesn't apply here. Is there a solution to this problem (possibly involving an entirely other structure; my only requirements are that the dimensions are a template parameter and that square matrices can have additional functionality). Thanks in advance, Ruud

  Read the article

• Loosely coupled implicit conversion

  - by ltjax

  Implicit conversion can be really useful when types are semantically equivalent. For example, imagine two libraries that implement a type identically, but in different namespaces. Or just a type that is mostly identical, except for some semantic-sugar here and there. Now you cannot pass one type into a function (in one of those libraries) that was designed to use the other, unless that function is a template. If it's not, you have to somehow convert one type into the other. This should be trivial (or otherwise the types are not so identical after-all!) but calling the conversion explicitly bloats your code with mostly meaningless function-calls. While such conversion functions might actually copy some values around, they essentially do nothing from a high-level "programmers" point-of-view. Implicit conversion constructors and operators could obviously help, but they introduce coupling, so that one of those types has to know about the other. Usually, at least when dealing with libraries, that is not the case, because the presence of one of those types makes the other one redundant. Also, you cannot always change libraries. Now I see two options on how to make implicit conversion work in user-code: The first would be to provide a proxy-type, that implements conversion-operators and conversion-constructors (and assignments) for all the involved types, and always use that. The second requires a minimal change to the libraries, but allows great flexibility: Add a conversion-constructor for each involved type that can be externally optionally enabled. For example, for a type A add a constructor: template <class T> A( const T& src, typename boost::enable_if<conversion_enabled<T,A>>::type* ignore=0 ) { *this = convert(src); } and a template template <class X, class Y> struct conversion_enabled : public boost::mpl::false_ {}; that disables the implicit conversion by default. Then to enable conversion between two types, specialize the template: template <> struct conversion_enabled<OtherA, A> : public boost::mpl::true_ {}; and implement a convert function that can be found through ADL. I would personally prefer to use the second variant, unless there are strong arguments against it. Now to the actual question(s): What's the preferred way to associate types for implicit conversion? Are my suggestions good ideas? Are there any downsides to either approach? Is allowing conversions like that dangerous? Should library implementers in-general supply the second method when it's likely that their type will be replicated in software they are most likely beeing used with (I'm thinking of 3d-rendering middle-ware here, where most of those packages implement a 3D vector).

  Read the article

• â?? in my hmtl after purify

  - by mmcgrail

  I have a database the i am rebuilding the table structure was crap so I'm porting some of the data from one table to another. This data appears to have been copy past from MSO product so as I'm getting the data I clean it up with htmlpurifier and some alittle str_replace in php here the clean function function clean_html($html) { $config = HTMLPurifier_Config::createDefault(); $config->set('AutoFormat','RemoveEmpty',true); $config->set('HTML','AllowedAttributes','href,src'); $config->set('HTML','AllowedElements','p,em,strong,a,ul,li,ol,img'); $purifier = new HTMLPurifier($config); $html = $purifier->purify($html); $html = str_replace('&nbsp;',' ',$html); $html = str_replace("\r",'',$html); $html = str_replace("\n",'',$html); $html = str_replace("\t",'',$html); $html = str_replace(' ',' ',$html); $html = str_replace('<p> </p>','',$html); $html = str_replace(chr(160),' ',$html); return trim($html); } but when I put the results into my new table and out put them to the ckeditor I get those three characters. I then have a javascript function that is called to remove special characters from the content of the ckeditor too. it doesn't clean it either function remove_special(str) { var rExps=[ /[\xC0-\xC2]/g, /[\xE0-\xE2]/g, /[\xC8-\xCA]/g, /[\xE8-\xEB]/g, /[\xCC-\xCE]/g, /[\xEC-\xEE]/g, /[\xD2-\xD4]/g, /[\xF2-\xF4]/g, /[\xD9-\xDB]/g, /[\xF9-\xFB]/g, /\xD1/,/\xF1/g, "/[\u00a0|\u1680|[\u2000-\u2009]|u200a|\u200b|\u2028|\u2029|\u202f|\u205f|\u3000|\xa0]/g", /\u000b/g,'/[\u180e|\u000c]/g', /\u2013/g, /\u2014/g, /\xa9/g,/\xae/g,/\xb7/g,/\u2018/g,/\u2019/g,/\u201c/g,/\u201d/g,/\u2026/g]; var repChar=['A','a','E','e','I','i','O','o','U','u','N','n',' ','\t','','-','--','(c)','(r)','*',"'","'",'"','"','...']; for(var i=0; i<rExps.length; i++) { str=str.replace(rExps[i],repChar[i]); } for (var x = 0; x < str.length; x++) { charcode = str.charCodeAt(x); if ((charcode < 32 || charcode > 126) && charcode !=10 && charcode != 13) { str = str.replace(str.charAt(x), ""); } } return str; } Does anyone know off hand what I need to do to get rid of them. I think they may be some sort of quote

  Read the article

• Problem with Command Pattern under Visual Studio 2008 (C++)

  - by D.Giunchi

  Dear All, I've a problem with this pattern under c++ on VS 2008. The same code has been tested in gcc (linux, mac and mingw for widnows) and it works. I copy/paste the code here: class MyCommand { public: virtual void execute() = 0; virtual ~MyCommand () {}; }; class MyOperation { public: virtual void DoIt() {}; //I also write it not inline }; class MyOperationDerived : public MyOperation { public: virtual void DoIt() {}; //I also write it not inline }; class MyUndoStackCommand : public MyCommand { public: typedef void(MyOperation::*Action)(); MyUndoStackCommand(MyOperation *rec, Action action); /*virtual*/ void execute(); /*virtual*/ ~MyUndoStackCommand(); private: MyOperation *myReceiver; Action myAction ; }; in cpp: #include "MyUndoStackCommand.h" #include "MyOperation.h" MyUndoStackCommand::~MyUndoStackCommand() { } MyUndoStackCommand::MyUndoStackCommand(myOperation *rec, Action action): myReceiver(rec), myAction(action) { } void MyUndoStackCommand::execute() { ((myReceiver)->*(myAction))(); } use in main.cpp: MyReceiver receiver; MyUndoStackCommand usc(&receiver, &MyOperation::DoIt); usc.execute(); when I debug under visual studio only if I set inside MyUndoStackCommand, directly myAction = &MyOperation::DoIt , it works, otherwise not. Any advice? thank you very much, dan Edit: The following code compiles with g++ - changes by Neil Butterworth flagged as //NB. class MyCommand { public: virtual void execute() = 0; virtual ~MyCommand () {}; }; class MyOperation { public: virtual void DoIt() {}; //I also write it not inline }; class MyOperationDerived : public MyOperation { public: virtual void DoIt() {}; //I also write it not inline }; class MyUndoStackCommand : public MyCommand { public: typedef void(MyOperation::*Action)(); MyUndoStackCommand(MyOperation *rec, Action action); /*virtual*/ void execute(); /*virtual*/ ~MyUndoStackCommand(); private: MyOperation *myReceiver; Action myAction ; }; MyUndoStackCommand::~MyUndoStackCommand() { } MyUndoStackCommand::MyUndoStackCommand(MyOperation *rec, //NB Action action) : myReceiver(rec), myAction(action) { } void MyUndoStackCommand::execute() { ((myReceiver)->*(myAction))(); } int main() { MyOperation receiver; //NB MyUndoStackCommand usc(&receiver, &MyOperation::DoIt); usc.execute(); }

  Read the article

• issues regarding UAC prompt

  - by peter

  I want to implement a UAC prompt for an application in visualc++ the operating system is 32bit x7460(2processor) Windowsserver 2008 the exe is myproject.exe through manifest.. Here for testing i wl build the application in Windows XP OS and copy the exe in to system containg the Windowsserver 2008 machine and replace it So what i did is i added a manifest like this name of that is myproject.exe.manifest My project has 3 folders like Headerfile,Resourcefile and Source file.I added this manifest(myproject.exe.manifest) in the Sourcefile folder containing other cpp and c code <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0"> <assemblyIdentity version="4.0" processorArchitecture="X7460" name="myproject" type="win32"/> <description>myproject Problem</description> <!-- Identify the application security requirements. --> <trustInfo xmlns="urn:schemas-microsoft-com:asm.v2"> <security> <requestedPrivileges> <requestedExecutionLevel level="requireAdministrator" uiAccess="false"/> </requestedPrivileges> </security> </trustInfo> </assembly> then i added this line of code in Resourcefile(.rc).Means one header file is there(Myproject.h).I added the line of code there #define MANIFEST_RESOURCE_ID 1 MANIFEST_RESOURCE_ID RT_MANIFEST "myproject.exe.manifest" Finally i did the following step Under Project, select Properties. 3. In Properties, select Manifest Tool, and then select Input and Output. 4. Add in the name of your application manifest file under Additional manifest files. 5. Rebuild your application. But i am getting lot of Syntax errors Is there any problems in the way which i followed.If i commented the line #define MANIFEST_RESOURCE_ID 1 MANIFEST_RESOURCE_ID RT_MANIFEST "myproject.exe.manifest" which added in Myproject.h for adding values in .rc file there willnot any error other than this general error c1010070: Failed to load and parse the manifest. The system cannot find the file specified. .\myproject.exe.manifest How to enable UAC prompt through programming

  Read the article

• IE7 and 8 Hangs Randomly on CSS Images

  - by BJ Safdie

  We have an ASP.NET 3.5 application that has been in production for over a year. Our last release was a couple of months ago. We use CSS for styling and application of background images to divs and such. The server is Windows 2003 with IIS. Suddenly, this week, we have had reports from some users that the page seems to hang up while loading. The status bar was showing the name of a background image used in the page main area (assigned in CSS). At our office, some of us could recreate the problem, while others could not. IE6 and Firefox do not seem to be affected, only IE7/8. Running Fiddler on an affected machine and trying to see what was happening with the requests seemed to make the problem go away (while running through Fiddler, it returned when not). Hitting Refresh on a hung load often made the page load just fine. I checked the background image, and even replaced it with an archived copy. No joy. We re-deployed the app from our production source. No Joy. We restarted IIS and eventually rebooted the whole server. There are no unusual entries in the event logs, the app logs or the IIS logs. Finally, I removed the image entirely and re-styled the page not to use a background image. That solved the problem at least for now. However, we have reports of other images "hanging." The images are PNGs, but I have heard some rumors that sometimes a GIF hangs, but I have no screenshot to confirm. This just started happening "out of the blue." There have been no releases or updates applied to the server recently. We even checked updates on clients to see if a recent Windows Update might have caused this on the client, but there was nothing updated within the last couple of weeks. If you have any information about this problem, I would love to hear from you. I would also greatly appreciate any recommendations on additional diagnostics we can try.

  Read the article

• Tokenizing a string with variable whitespace

  - by Ron Holcomb

  I've read through a few threads detailing how to tokenize strings, but I'm apparently too thick to adapt their suggestions and solutions into my program. What I'm attempting to do is tokenize each line from a large (5k+) line file into two strings. Here's a sample of the lines: 0 -0.11639404 9.0702948e-05 0.00012207031 0.0001814059 0.051849365 0.00027210884 0.062103271 0.00036281179 0.034423828 0.00045351474 0.035125732 The difference I'm finding between my lines and the other sample input from other threads is that I have a variable amount of whitespace between the parts that I want to tokenize. Anyways, here's my attempt at tokenizing: #include <iostream> #include <iomanip> #include <fstream> #include <string> using namespace std; int main(int argc, char *argv[]) { ifstream input; ofstream output; string temp2; string temp3; input.open(argv[1]); output.open(argv[2]); if (input.is_open()) { while (!input.eof()) { getline(input, temp2, ' '); while (!isspace(temp2[0])) getline(input, temp2, ' '); getline (input, temp3, '\n'); } input.close(); cout << temp2 << endl; cout << temp3 << endl; return 0; } I've clipped it some, since the troublesome bits are here. The issue that I'm having is that temp2 never seems to catch a value. Ideally, it should get populated with the first column of numbers, but it doesn't. Instead, it is blank, and temp3 is populated with the entire line. Unfortunately, in my course we haven't learned about vectors, so I'm not quite sure how to implement them in the other solutions for this I've seen, and I'd like to not just copy-paste code for assignments to get things work without actually understanding it. So, what's the extremely obvious/already been answered/simple solution I'm missing? I'd like to stick to standard libraries that g++ uses if at all possible.

  Read the article

• Suggest an alternative way to organize/build a database solution.

  - by Hamish Grubijan

  We are using Visual Studio 2010, but this was first conceived with VS2003. I will forward the best suggestions to my team. The current setup almost makes me vomit. It is a C# solution with most projects containing .sql files. Because we support Microsoft, Oracle, and Sybase, and so home-brewed a pre-processor, much like C preprocessor, except that substitutions are performed by a home-brewed C# program without using yacc and tools like that. #ifdefs are used for conditional macro definitions, and yeah - macros are the way this is done. A macro can expand to another macro or two, but this should eventually terminate. Only macros have #ifdef in them - the rest of the SQL-like code just uses these macros. Now, the various configurations: Debug, MNDebug, MNRelease, Release, SQL_APPLY_ALL, SQL_APPLY_MSFT, SQL_APPLY_ORACLE, SQL_APPLY_SYBASE, SQL_BUILD_OUTPUT_ALL, SQL_COMPILE, as well as 2 more. Also: Any CPU, Mixed Platforms, Win32. What drives me nuts is having to configure it correctly as well as choosing the right one out of 12 x 3 = 36 configurations as well as having to substitute database name depending on the type of database: config, main, or gateway. I am thinking that configuration should be reduced to just Debug, Release, and SQL_APPLY. Also, using 0, 1, and 2 seems so 80s ... Finally, I think my intention to build or not to build 3 types of databases for 3 types of vendors should be configured with just a tic tac toe board like: XOX OOX XXX In this case it would mean build MSFT+CONFIG, all SYBASE, and all GATEWAY. Still, the overall thing which uses a text file and a pre-processor and many configurations seems incredibly clunky. It is year 2010 now and someone out there is bound to have a very clean and/or creative tool/solution. The only pro would be that the existing collection of macros has been well tested. Have you ever had to write SQL that would work for several vendors? How did you do it? SqlVars.txt (Every one of 30 users makes a copy of a template and modifies this to suit their needs): // This is the default parameters file and should not be changed. // You can overwrite any of these parameters by copying the appropriate // section to override into SqlVars.txt and providing your own information. //Build types are 0-Config, 1-Main, 2-Gateway BUILD_TYPE=1 REMOVE_COMMENTS=1 // Login information used when applying to a Microsoft SQL server database SQL_APPLY_MSFT_version=SQL2005 SQL_APPLY_MSFT_database=msftdb SQL_APPLY_MSFT_server=ABC SQL_APPLY_MSFT_user=msftusr SQL_APPLY_MSFT_password=msftpwd // Login information used when applying to an Oracle database SQL_APPLY_ORACLE_version=ORACLE10g SQL_APPLY_ORACLE_server=oradb SQL_APPLY_ORACLE_user=orausr SQL_APPLY_ORACLE_password=orapwd // Login information used when applying to a Sybase database SQL_APPLY_SYBASE_version=SYBASE125 SQL_APPLY_SYBASE_database=sybdb SQL_APPLY_SYBASE_server=sybdb SQL_APPLY_SYBASE_user=sybusr SQL_APPLY_SYBASE_password=sybpwd ... (THIS GOES ON)

  Read the article

• Download a file using cocoa

  - by dododedodonl

  Hi All, I want to download a file to the downloads folder. I searched google for this and found the NSURLDownload class. I've read the page in the dev center and created this code (with some copy and pasting) this code: @implementation Downloader @synthesize downloadResponse; - (void)startDownloadingURL:(NSString*)downloadUrl destenation:(NSString*)destenation { // create the request NSURLRequest *theRequest=[NSURLRequest requestWithURL:[NSURL URLWithString:downloadUrl] cachePolicy:NSURLRequestUseProtocolCachePolicy timeoutInterval:60.0]; // create the connection with the request // and start loading the data NSURLDownload *theDownload=[[NSURLDownload alloc] initWithRequest:theRequest delegate:self]; if (!theDownload) { NSLog(@"Download could not be made..."); } } - (void)download:(NSURLDownload *)download decideDestinationWithSuggestedFilename:(NSString *)filename { NSString *destinationFilename; NSString *homeDirectory=NSHomeDirectory(); destinationFilename=[[homeDirectory stringByAppendingPathComponent:@"Desktop"] stringByAppendingPathComponent:filename]; [download setDestination:destinationFilename allowOverwrite:NO]; } - (void)download:(NSURLDownload *)download didFailWithError:(NSError *)error { // release the connection [download release]; // inform the user NSLog(@"Download failed! Error - %@ %@", [error localizedDescription], [[error userInfo] objectForKey:NSErrorFailingURLStringKey]); } - (void)downloadDidFinish:(NSURLDownload *)download { // release the connection [download release]; // do something with the data NSLog(@"downloadDidFinish"); } - (void)setDownloadResponse:(NSURLResponse *)aDownloadResponse { [aDownloadResponse retain]; [downloadResponse release]; downloadResponse = aDownloadResponse; } - (void)download:(NSURLDownload *)download didReceiveResponse:(NSURLResponse *)response { // reset the progress, this might be called multiple times bytesReceived = 0; // retain the response to use later [self setDownloadResponse:response]; } - (void)download:(NSURLDownload *)download didReceiveDataOfLength:(unsigned)length { long long expectedLength = [[self downloadResponse] expectedContentLength]; bytesReceived = bytesReceived+length; if (expectedLength != NSURLResponseUnknownLength) { percentComplete = (bytesReceived/(float)expectedLength)*100.0; NSLog(@"Percent - %f",percentComplete); } else { NSLog(@"Bytes received - %d",bytesReceived); } } -(NSURLRequest *)download:(NSURLDownload *)download willSendRequest:(NSURLRequest *)request redirectResponse:(NSURLResponse *)redirectResponse { NSURLRequest *newRequest=request; if (redirectResponse) { newRequest=nil; } return newRequest; } @end But my problem is now, it doesn't appear on the desktop as specified. And I want to put it in downloads and not on the desktop... What do I have to do?

  Read the article

• Database Schema Versioning Strategies

  - by Jack Ryan

  I work on a project that uses a reasonably large database, the live version weighing in at somewhere around 60-80GB. The live database is the only real definitive source of our schema, and because of its size duplicating this database is too slow to be done often. This means we have ended up developing our database schema in a pretty ad hoc way, using sql compare to migrate changes from dev dbs to the live system, and only wiping our dev dbs every month or two. I am hoping to get some pointers on how to improve our database development work flow so that we have a little more control. Some things to think about: Currently nobody is really in charge of the database schema, all developers can change it if they need to, though generally these decisions are talked about before they are done. There are stored procedures, functions, and views in the database. These should probably be dumped to files so they can be reloaded on every build. Schema changes should probably be checked in as scripts. We have started to do this recently. However all our scripts must then be numbered (because there may be dependencies between them), and must be re runnable (because our build script currently runs them all in order). This makes them hard to read because they are full of conditionals that check whether tables or columns already exist. This is a step that is often forgotten by developers. Getting a new database should be quick and easy. This is currently a big problem, it takes several hours to get a copy of last nights backup and restore it onto a dev machine. Some mechanism needs to be in place to allow developers to update static data. We have tables that contain data that is never updated through the application, but does potentially need to be changed when we do a new release (often this drives dropdowns). The whole thing needs to be runnable as part of a build script. Are there any tools that can be used to help to do this? Eventually I would like to be at a point where a new DB can be built from scratch without copying any data from the live system. I don't mind writing some scripts to glue all the steps together but each part should be easily editable so that we continue to use it rather than make changes directly on DBs.

  Read the article

• is it possible that a greasemonkey script can work on one computer but not on another?

  - by plastic cloud

  i'm writing an greasemonkey script for somebody else. he is a moderator and i am not. and the script will help him do some moderating things. now the script works for me. as far as it can work for me.(as i am not a mod) but even those things that work for me are not working for him.. i checked his version of greasemonkey plugin and firefox and he is up to date. only thing that's really different is that i'm on a mac and he is pc, but i wouldn't think that would be any problem. this is one of the functions that is not working for him. he does gets the first and third GM_log message. but not the second one ("got some(1) .."). kmmh.trackNames = function(){ GM_log("starting to get names from the first "+kmmh.topAmount+" page(s) from leaderboard."); kmmh.leaderboardlist = []; for (var p=1; p<=(kmmh.topAmount); p++){ var page = "http://www.somegamesite.com/leaderboard?page="+ p; var boardHTML = ""; dojo.xhrGet({ url: page, sync: true, load: function(response){ boardHTML = response; GM_log("got some (1) => "+boardHTML.length); }, handleAs: "text" }); GM_log("got some (2) => "+boardHTML.length); //create dummy div and place leaderboard html in there var dummy = dojo.create('div', { innerHTML: boardHTML }); //search through it var searchN = dojo.query('.notcurrent', dummy).forEach(function(node,index){ if(index >= 10){ kmmh.leaderboardlist.push(node.textContent); // add names to array } }); } GM_log("all names from "+ kmmh.topAmount +" page(s) of leaderboard ==> "+ kmmh.leaderboardlist); does anyone have any idea what could be causing this ?? EDIT: i know i had to write according to what he would see on his mod screen. so i asked him to copy paste source of pages and so on. and besides that, this part of the script is not depending on being a mod or not. i got everything else working for him. just this function still doesn't on neither of his pc's.

  Read the article

• Secure WS client with UsernameToken(SOAP security header)

  - by user79163

  Hi, I'm trying to secure my WS client to be able to call the WS. My code looks like this: SendSmsService smsService = new SendSmsService(); SendSms sendSMS = smsService.getSendSms(); BindingProvider stub = (BindingProvider)sendSMS; //Override endpoint with local copy of wsdl. String URL ="";//here is the wsdl url Map<String,Object> requestContext = stub.getRequestContext(); requestContext.put(BindingProvider.ENDPOINT_ADDRESS_PROPERTY, URL); //Set usernametoken URL fileURL = loader.getResource("client-config.xml"); File file = new File(fileURL.getFile()); FileInputStream clientConfig = null; try { clientConfig = new FileInputStream(file); } catch (FileNotFoundException e) { e.printStackTrace(); } XWSSecurityConfiguration config = null; try { config = SecurityConfigurationFactory.newXWSSecurityConfiguration(clientConfig); } catch (Exception e) { e.printStackTrace(); log.warn("Exception: "+e.getMessage()); } requestContext.put(XWSSecurityConfiguration.MESSAGE_SECURITY_CONFIGURATION, config); //Invoke the web service String requestId = null; try { requestId = sendSMS.sendSms(addresses, senderName, charging, message, receiptRequest); } catch (PolicyException e) { // TODO Auto-generated catch block e.printStackTrace(); } catch (ServiceException e) { // TODO Auto-generated catch block e.printStackTrace(); } and the config file looks like this: <xwss:JAXRPCSecurity xmlns:xwss="http://java.sun.com/xml/ns/xwss/config" optimize="true"> <xwss:Service> <xwss:SecurityConfiguration dumpMessages="true" xmlns:xwss="http://java.sun.com/xml/ns/xwss/config"> <xwss:UsernameToken name="username" password="password> </xwss:SecurityConfiguration> </xwss:Service> <xwss:SecurityEnvironmentHandler> util.SecurityEnvironmentHandler </xwss:SecurityEnvironmentHandler> </xwss:JAXRPCSecurity> The SecurityEnviromentHandler is a dummy class that implements javax.security.auth.callback.CallbackHandler. Authentication must be in compliance with Oasis Web Services Security Username Token Profile 1.0. But I'm constantly getting "Security header not valid" error. Where am I going wrong, can anyone tell me. I used wsimport(JAX_WS 2.1 to generate classes for my client) Note:Only thing I know about this WS is WSDL URL and user&pass for authentication

  Read the article

• ocjective-c Obtain return value from public method

  - by Felix

  I'm pretty new to objective-C (and C in general) and iPhone development and am coming from the java island, so there are some fundamentals that are quite tough to learn for me. I'm diving right into iOS5 and want to use storyboards. For now I am trying to setup a list in a UITableViewController that will be filled with values returned by a web service in the future. For now, I just want to generate some mock objects and show their names in the list to be able to proceed. Coming from java, my first approach would be to create a new Class that provides a global accessible method to generate some objects for my list: #import <Foundation/Foundation.h> @interface MockObjectGenerator : NSObject +(NSMutableArray *) createAndGetMockProjects; @end Implementation is... #import "MockObjectGenerator.h" // Custom object with some fields #import "Project.h" @implementation MockObjectGenerator + (NSMutableArray *) createAndGetMockObjects { NSMutableArray *mockProjects = [NSMutableArray alloc]; Project *project1 = [Project alloc]; Project *project2 = [Project alloc]; Project *project3 = [Project alloc]; project1.name = @"Project 1"; project2.name = @"Project 2"; project3.name = @"Project 3"; [mockProjects addObject:project1]; [mockProjects addObject:project2]; [mockProjects addObject:project3]; } And here is my ProjectTable.h that is supposed to control my ListView #import <UIKit/UIKit.h> @interface ProjectsTable : UITableViewController @property (strong, nonatomic) NSMutableArray *projectsList; @end And finally ProjectTable.m #import "ProjectsTable.h" #import "Project.h" #import "MockObjectGenerator.h" @interface ProjectsTable { @synthesize projectsList = _projectsList; -(id)initWithStyle:(UITableViewStyle:style { self = [super initWithStyle:style]; if (self) { _projectsList = [[MockObjectGenerator createAndGetMockObjects] copy]; } return self; } - (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView { // only one section for all return 1; - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { NSLog(@"%d entries in list", _projectsList.count); return _projectsList.count; - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { // the identifier of the lists prototype cell is set to this string value static NSString *CellIdentifier = @"projectCell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; Project *project = [_projectsList objectAtIndex:indexPath.row]; cell.textLabel.text = project.name } So while I think everything is correctly set, I expect the tableView to show my three mock objects in its rows. But it stays empty and the NSLog method prints "0 entries in list" into the console. So what am I doing wrong? Any help is appreciated. Best regards Felix

  Read the article

• Dynamic allocating of const member structures

  - by Willy

  I've got class which is using plain-only-data struct with const variables and I'm not sure, if I'm allocating these structures in a proper way. It looks more or less like: #include <cstdlib> #include <iostream> using std::cout; using std::endl; struct some_const_struct { const int arg1; const int arg2; }; class which_is_using_above_struct { public: some_const_struct* m_member; const some_const_struct* const m_const_member; public: const some_const_struct& get_member() const { return *m_member; } const some_const_struct& get_const_member() const { return *m_const_member; } void set_member(const int a, const int b) { if(m_member != NULL) { delete m_member; m_member = NULL; } m_member = new some_const_struct((some_const_struct){a, b}); } explicit which_is_using_above_struct(const int a, const int b) : m_const_member(new some_const_struct((const some_const_struct){a, b})) { m_member = NULL; } ~which_is_using_above_struct() { if(m_member != NULL) { delete m_member; } if(m_const_member != NULL) { delete m_const_member; } } }; int main() { which_is_using_above_struct c(1, 2); c.set_member(3, 4); cout << "m_member.arg1 = " << c.get_member().arg1 << endl; cout << "m_member.arg2 = " << c.get_member().arg2 << endl; cout << "m_const_member.arg1 = " << c.get_const_member().arg1 << endl; cout << "m_const_member.arg2 = " << c.get_const_member().arg2 << endl; return 0; } I'm just not quite sure if the statement: m_member = new some_const_struct((some_const_struct){a, b}); doesn't produce unnessesary use of some_const_struct's copy constructor, ergo allocating that struct twice. What do you think? And is it reasonable to make that struct's members const? (they're not supposed to change in their lifetime at all)

  Read the article

< Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >