Search Results

Search found 59278 results on 2372 pages for 'time estimation'.

Page 496/2372 | < Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >

  • Setting up shared connection

    - by Calvin Froedge
    I have a network that is connected to the internet via a switch connected to a router. I have it setup like this so I can work on the new network without causing problems on the old. Anyway, I'm trying to enable internet connection sharing. Internet comes to server like this: Modem - Router - Switch - Ubuntu 11.10 (Eth0) I want to share the connection through Eth1 (Eth1 - Managed Switch - Clients). Here is my config for /etc/network/interfaces: I have a DHCP server running on Eth1. Here is my config: ddns-update-style none; option domain-name "myserver.local"; option domain-name-servers 192.168.1.2, 8.8.8.8; default-lease-time 600; max-lease-time 7200; authoritative; subnet 192.168.1.0 netmask 255.255.255.0 { interface eth1; range 192.168.1.3 192.168.1.254; option routers 192.168.1.1; option subnet-mask 255.255.255.0; option broadcast-address 192.168.1.255; } Here is /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp #Used for internal network auto eth1 iface eth1 inet static address 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255 network 192.168.1.0 Here is /etc/hosts: 127.0.0.1 localhost 127.0.1.1 myserver.isp.com server 192.168.1.2 server.myserver.local server myserver.local In /etc/sysctl.conf, I've set the following: net.ipv4.ip_forward=1 Finally, in /etc/rc.local, I've set the following: /sbin/iptables -P FORWARD ACCEPT /sbin/iptables --table nat -A POSTROUTING -o eth1 -j MASQUERADE When I ping 8.8.8.8 (google's DNS) from a client that is authenticated with my DHCP server (they have been assigned a local ip, like 192.168.1.10), I get a timeout. How can I debug this further to figure out where my problem is?

    Read the article

  • How to create water like in new super mario bros?

    - by user1103457
    I assume the water in New super mario bros works the same as in the first part of this tutorial: http://gamedev.tutsplus.com/tutorials/implementation/make-a-splash-with-2d-water-effects/ But in new super mario bros the water also has constant waves on the surface, and the splashes look very different. What's also a difference is that in the tutorial, if you create a splash, it first creates a deep "hole" in the water at the origin of the splash. In new super mario bros this hole is absent or much smaller. When I refer to the splashes in new super mario bros I am referring to the splashes that the player creates when jumping in and out of the water. For reference you could use this video: http://www.ign.com/videos/2012/11/17/new-super-mario-bros-u-3-star-coin-walkthrough-sparkling-waters-1-waterspout-beach just after 00:50, when the camera isn't moving you can get a good look at the water and the constant waves. there are also some good examples of the splashes during that time. How do they create the constant waves and the splashes? I am programming in XNA. (I have tried this myself but couldn't really get it all to work well together) (and as bonus questions: how do they create the light spots just under the surface of the waves, and how do they texture the deeper parts of the water? This is the first time I try to create water like this.)

    Read the article

  • SQL SERVER – ORDER BY ColumnName vs ORDER BY ColumnNumber

    - by pinaldave
    I strongly favor ORDER BY ColumnName. I read one of the blog post where blogger compared the performance of the two SELECT statement and come to conclusion that ColumnNumber has no harm to use it. Let us understand the point made by first that there is no performance difference. Run following two scripts together: USE AdventureWorks GO -- ColumnName (Recommended) SELECT * FROM HumanResources.Department ORDER BY GroupName, Name GO -- ColumnNumber (Strongly Not Recommended) SELECT * FROM HumanResources.Department ORDER BY 3,2 GO If you look at the result and see the execution plan you will see that both of the query will take the same amount of the time. However, this was not the point of this blog post. It is not good enough to stop here. We need to understand the advantages and disadvantages of both the methods. Case 1: When Not Using * and Columns are Re-ordered USE AdventureWorks GO -- ColumnName (Recommended) SELECT GroupName, Name, ModifiedDate, DepartmentID FROM HumanResources.Department ORDER BY GroupName, Name GO -- ColumnNumber (Strongly Not Recommended) SELECT GroupName, Name, ModifiedDate, DepartmentID FROM HumanResources.Department ORDER BY 3,2 GO Case 2: When someone changes the schema of the table affecting column order I will let you recreate the example for the same. If your development server where your schema is different than the production server, if you use ColumnNumber, you will get different results on the production server. Summary: When you develop the query it may not be issue but as time passes by and new columns are added to the SELECT statement or original table is re-ordered if you have used ColumnNumber it may possible that your query will start giving you unexpected results and incorrect ORDER BY. One should note that the usage of ORDER BY ColumnName vs ORDER BY ColumnNumber should not be done based on performance but usability and scalability. It is always recommended to use proper ORDER BY clause with ColumnName to avoid any confusion. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Pygame surfaces and their Rects

    - by Jaka Novak
    I am trying to understand how pygame surfaces work. I am confused about Rect position of Surface object. If I try blit surface on screen at some position then Surface is drawn at right position, but Rect of the surface is still at position (0, 0)... I tried write my own surface class with new rect, but i am not sure if is that right solution. My goal is that i could move surface like image with rect.move() or something like that. If there is any solution to do that i would be happy to read it. Thanks for answer and time for reading this awful English If helps i write some code for better understanding my problem. (run it first, and then uncomment two lines of code and run again to see the diference): import pygame from pygame.locals import * class SurfaceR(pygame.Surface): def __init__(self, size, position): pygame.Surface.__init__(self, size) self.rect = pygame.Rect(position, size) self.position = position self.size = size def get_rect(self): return self.rect def main(): pygame.init() screen = pygame.display.set_mode((640, 480)) pygame.display.set_caption("Screen!?") clock = pygame.time.Clock() fps = 30 white = (255, 255, 255) red = (255, 0, 0) green = (0, 255, 0) blue = (0, 0, 255) surface = pygame.Surface((70,200)) surface.fill(red) surface_re = SurfaceR((300, 50), (100, 300)) surface_re.fill(blue) while True: for event in pygame.event.get(): if event.type == QUIT: return 0 screen.blit(surface, (100,50)) screen.blit(surface_re, surface_re.position) #pygame.draw.rect(screen, white, surface.get_rect()) #pygame.draw.rect(screen, white, surface_re.get_rect()) pygame.display.update() clock.tick(fps) if __name__ == "__main__": main()

    Read the article

  • Is SQL Azure a newbies springboard?

    - by jamiet
    Earlier today I was considering the various SQL Server platforms that are available today and I wondered aloud, wonder how long until the majority of #sqlserver newcomers use @sqlazure instead of installing locally Let me explain. My first experience of development was way back in the early 90s when I would crank open VBA in Access or Excel and start hammering out some code, usually by recording macros and looking at the code that they produced (sound familiar?). The reason was simple, Office was becoming ubiquitous so the barrier to entry was incredibly low and, save for a short hiatus at university, I’ve been developing on the Microsoft platform ever since. These days spend most of my time using SQL Server. I take a look at SQL Azure today I see a lot of similarities with those early experiences, the barrier to entry is low and getting lower. I don’t have to download some software or actually install anything other than a web browser in order to get myself a fully functioning SQL Server  database against which I can ostensibly start hammering out some code and I believe that to be incredibly empowering. Having said that there are still a few pretty high barriers, namely: I need to get out my credit card Its pretty useless without some development tools such as SQL Server Management Studio, which I do have to install. The second of those barriers will disappear pretty soon when Project Houston delivers a web-based admin and presentation tool for SQL Azure so that just leaves the matter of my having to use a credit card. If Microsoft have any sense at all then they will realise the huge potential of opening up a free, throttled version of SQL Azure for newbies to party on; they get to developers early (just like they did with me all those years ago) and it gives potential customers an opportunity to try-before-they-buy. Perhaps in 20 years time people will be talking about SQL Azure as being their first foray into the world of coding! @Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • What are some arguments AGAINST using EntityFramework?

    - by Rachel
    The application I am currently building has been using Stored procedures and hand-crafted class models to represent database objects. Some people have suggested using Entity Framework and I am considering switching to that since I am not that far into the project. My problem is, I feel the people arguing for EF are only telling me the good side of things, not the bad side :) My main concerns are: We want Client-Side validation using DataAnnotations, and it sounds like I have to create the client-side models anyways so I am not sure that EF would save that much coding time We would like to keep the classes as small as possible when going over the network, and I have read that using EF often includes extra data that is not needed We have a complex database layer which crosses multiple databases, and I am not sure EF can handle this. We have one Common database with things like Users, StatusCodes, Types, etc and multiple instances of our main databases for different instances of the application. SELECT queries can and will query across all instances of the databases, however users can only modify objects that are in the database they are currently working on. They can switch databases without reloading the application. Object modes are very complex and there are often quite a few joins involved Arguments for EF are: Concurrency. I wouldn't have to code in checks to see if the record was updated before each save Code Generation. EF can generate partial class models and POCOs for me, however I am not positive this would really save me that much time since I think we would still need to create the client-side models for validation and some custom parsing methods. Speed of development since we wouldn't need to create the CRUD stored procedures for every database object Our current architecture consists of a WPF Service which handles database calls via parameterized Stored Procedures, POCO objects that go to/from the WCF service and the WPF client, and the WPF client itself which transforms POCOs into class Models for the purpose of Validation and DataBinding.

    Read the article

  • Dynamically changing DVT Graph at Runtime

    - by mona.rakibe(at)oracle.com
    I recently came across this requirement where the customer wanted to change the graph type at run-time based on some selection. After some internal discussions we realized this can be best achieved by using af:switcher to toggle between multiple graphs. In this blog I will be sharing the sample that I build to demonstrate this.[Note] : In the below sample, every-time user changes graph type there is a server trip, so please use this approach with performance implications in mind.This sample can be downloaded  from DynamicGraph.zipSet-up: Create a BAM data control using employees DO (sample)(Refer this entry)Steps:Create the View Create a new JSF page .From component palette drag and drop "Select One Radio" into this page Enter some Label and click "Finish"In Property Editor set the "AutoSubmit" property to trueNow drag and drop "Switcher" from components into this page.In the Structure pane select the af:switcher right click and surround with "PanelGroupLayout"In Property Editor set the "PartialTriggers"  property of PanelGroupLayout to the id of af:selectOneRadioAgain in the Structure pane select the af:switcher right click and select "Insert inside af:switcher->facet"Enter Facet name (ex: pie)Again in the Structure pane select the af:switcher right click and select "Insert inside af:switcher->facet" Enter  another Facet name (ex: bar)From "Data Controls" drag and drop "Employees->Query"  into the pie facet as "Graph->Pie" (Pie: Sales_Number and Slices: Salesperson)From "Data Controls" drag and drop "Employees->Query"  into the bar facet as "Graph->Bar" (Bars :Sales_Number and X-axis : Salesperson).Now wire the switcher to the af:selectOneRadio using their "facetName" and "value" property respectively.Now run the page, notice that graph renders as per the selection by user.

    Read the article

  • IIM Calcutta &ndash; EPBM 14 &ndash; Campus Visit &ndash; Day 1 &ndash; Registration &amp; Beginning

    - by Ram Shankar Yadav
    Hey Guys! I’m back with the updates, it was an awesome Monday morning, for me it started when Sun came on my face, and the time was 5:30AM~~ I was amazed that this part of the country gets the sunrise quite early, but I ignored the sunlight for a while by covering my face, but…finally the door knocked….~ It was Mukesh, and the time was 6 AM, so I thought let’s get rid of laziness and start my day~ After having my brush and bath, I shaved and we headed for the Breakfast~ We quickly had our bread butter jam combo, and left for the Auditorium for Registration~ We searched for our names and signed the Registration paper and got a cool IIM C bag, with following in it: - a IIMC Notepad - Cello X Caliber pen - a book “What the Best MBAs Know”, and - Reading Material for Campus Sessions Today we had lectures on “Evolution of Indian Corporate Sector” (2 Session of 1.5 hrs each) and “Indian Economy: Crisis & Response” (2 Sessions of 1.5 hrs). “Evolution of Indian Corporate Sector” was by Prof. Raghabendra Chattopadhyay, was one of my best lectures I’ve ever attended in my life, he started with a question that saying that “The Indian Capitalists didn’t wanted the economy to open up till the economic reforms occurred?”, he is one of the best story tellers I’ve ever met, he started with the ancient European and Indian history and linked the trade & economics with it, simply amazing~ I can’t believe I didn’t get bore even after a 2hour long session…awesome~~ Afterward we had our lunch break, we did our lunch in “New Hostel” building and got back for “Indian Economy” sessions. Indian Economy session was taken by Sudip Chaudhuri, for us he’s a well known face as we have already attended his sessions on Macroeconomics~ It was an interactive, easy going, and a laughable session, and we did discussed some serious issues as well. After the class got over we went out and got few T-Shirts and Mugs for ourselves, and yep not to forget it “Rained” in Kolkata today~~ We got back and had our dinner and dispersed finally… I loved this amazing Monday, and hope the spirit continues till Saturday~ I’m feeling the enrichment in my thought and perceptions~ I’m lovin’ it~~ ram :)

    Read the article

  • CodePlex Daily Summary for Friday, June 08, 2012

    CodePlex Daily Summary for Friday, June 08, 2012Popular ReleasesMy Google Workspace: Google Workspace 1.0.0: Useful Google Search workspace that includes web-browsing and applitions access Download it to see it in action, please take a look and let me know your feedback Thanks!Tweetz - Windows Twitter Client Gadget: tweetz 3.1.5.8: Fixes bug where Ctrl+Shift+S sends a tweet when only Ctrl+S should send the tweet.C++ AMP Conformance Test Suite: C++ AMP Conformance Test Suite 0.99.0: Initial release of the C++ AMP Conformance Test Suite.Audio Pitch & Shift: Audio Pitch And Shift 4.5.0: Added Instruments tab for modules Open folder content feature Some bug fixesLINQ to Twitter: LINQ to Twitter Beta v2.0.26: Supports .NET 3.5, .NET 4.0, Silverlight 4.0, Windows Phone 7.1, Client Profile, and Windows 8. 100% Twitter API coverage. Also available via NuGet! Follow @JoeMayo.Python Tools for Visual Studio: 1.5 Beta 1: We’re pleased to announce the release of Python Tools for Visual Studio 1.5 Beta. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including: • Supports CPython, IronPython, Jython and PyPy • Python editor with advanced member, signature intellisense and refactoring • Code navigation: “Find all refs”, goto definition, and object browser • Local and remote debugging •...Circuit Diagram: Circuit Diagram 2.0 Beta 1: New in this release: Automatically flip components when placing Delete components using keyboard delete key Resize document Document properties window Print document Recent files list Confirm when exiting with unsaved changes Thumbnail previews in Windows Explorer for CDDX files Show shortcut keys in toolbox Highlight selected item in toolbox Zoom using mouse scroll wheel while holding down ctrl key Plugin support for: Custom export formats Custom import formats Open...Umbraco CMS: Umbraco CMS 5.2 Beta: The future of Umbracov5 represents the future architecture of Umbraco, so please be aware that while it's technically superior to v4 it's not yet on a par feature or performance-wise. What's new? For full details see our http://progress.umbraco.org task tracking page showing all items complete for 5.2. In a nutshellPackage Builder Starter Kits Dynamic Extension Methods Querying / IsHelpers Friendly alt template URLs Localization Various bug fixes / performance enhancements Gett...JayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.0.5: JayData is a unified data access library for JavaScript developers to query and update data from different sources like WebSQL, IndexedDB, OData, Facebook or YQL. See it in action in this 6 minutes video New features in JayData 1.0.5http://jaydata.org/blog/jaydata-1.0.5-is-here-with-authentication-support-and-more http://jaydata.org/blog/release-notes Sencha Touch 2 module (read-only)This module can be used to bind data retrieved by JayData to Sencha Touch 2 generated user interface. (exam...32feet.NET: 3.5: This version changes the 32feet.NET library (both desktop and NETCF) to use .NET Framework version 3.5. Previously we compiled for .NET v2.0. There are no code changes from our version 3.4. See the 3.4 release for more information. Changes due to compiling for .NET 3.5Applications should be changed to use NET/NETCF v3.5. Removal of class InTheHand.Net.Bluetooth.AsyncCompletedEventArgs, which we provided on NETCF. We now just use the standard .NET System.ComponentModel.AsyncCompletedEvent...DotNetNuke® Links: 06.02.01: Added new DNN 6.2.0 beta social feature "friends" BugfixesApplication Architecture Guidelines: Application Architecture Guidelines 3.0.7: 3.0.7Jolt Environment: Jolt v2 Stable: Many new features. Follow development here for more information: http://www.rune-server.org/runescape-development/rs-503-client-server/projects/298763-jolt-environment-v2.html Setup instructions in downloadSharePoint Euro 2012 - UEFA European Football Predictor: havivi.euro2012.wsp (1.5): New fetures:Multilingual Support Max users property in Standings Web Part Games time zone change (UTC +1) bug fix - Version 1.4 locking problem http://euro2012.codeplex.com/discussions/358262 bug fix - Field Title not found (v.1.3) German SP http://euro2012.codeplex.com/discussions/358189#post844228 Bug fix - Access is denied.for users with contribute rights Bug fix - Installing on non-English version of SharePoint Bug fix - Title Rules Installing SharePoint Euro 2012 PredictorSharePoint E...xNet: xNet 2.1.1: Release xNet 2.1.1Command Line Parser Library: 1.9.2.4 stable: This is the first stable of 1.9.* branch. Added tests for HelpText::AutoBuild. Fixed minor formatting error in HelpText::DefaultParsingErrorsHandler.myManga: myManga v1.0.0.4: ChangeLogUpdating from Previous Version: Extract contents of Release - myManga v1.0.0.4.zip to previous version's folder. Replaces: myManga.exe BakaBox.dll CoreMangaClasses.dll Manga.dll Plugins/MangaReader.manga.dll Plugins/MangaFox.manga.dll Plugins/MangaHere.manga.dll Plugins/MangaPanda.manga.dllMVVM Light Toolkit: V4RC (binaries only) including Windows 8 RP: This package contains all the latest DLLs for MVVM Light V4 RC. It includes the DLLs for Windows 8 Release Preview. An updated Nuget package is also available at http://nuget.org/packages/MvvmLightLibsPreviewExtAspNet: ExtAspNet v3.1.7: +2012-06-03 v3.1.7 -?????????BUG,??????RadioButtonList?,AJAX????????BUG(swtseaman、????)。 +?Grid?BoundField、HyperLinkField、LinkButtonField、WindowField??HtmlEncode?HtmlEncodeFormatString(TiDi)。 -HtmlEncode?HtmlEncodeFormatString??????true,??????HTML????????。 -??????Asp.Net??GridView?BoundField?????????。 -http://msdn.microsoft.com/en-us/library/system.web.ui.webcontrols.boundfield.htmlencode -?Grid?HyperLinkField、WindowField??UrlEncode??,????URL??(???true)。 -?????????????,?????????????...LiveChat Starter Kit: LCSK v1.5.2: New features: Visitor location (City - Country) from geo-location Pass configuration via javascript for the chat box New visitor identification (no more using the IP address as visitor identification) To update from 1.5.1 Run the /src/1.5.2-sql-updates.txt SQL script to update your database tables. If you have it installed via NuGet, simply update your package and the file will be included so you can run the update script. New installation The easiest way to add LCSK to your app is by...New ProjectsAFSAspnetHandyAppTry: ddddddBlackrain Engine: A real-time rendering, game/cinematic engine.codeplexbsso: codeplexbsso?????codesmith template for DbEntry.Net: codesmith template for DbEntry.NetDevTeamsUnse: Proyecto de software para crear un sistema de gestion para una bibliotecaErrordite Client: Client libraries for Errordite Errordite is a simple plug-in for any .net application that will log details of exceptions generated by your application. Errordite will group together errors that are the same, either automatically or with rules you define. You then decide how to progress with the errors. You can investigate them, request to ignore them or put them on hold while you have more pressing concerns. For further information and to sign up for the beta, please visit http://ww...Expense Tracker V2: Asp.net site to manage expenses on a daily basis.Experiment N-Layer Project: The goal of this project to build a deal application using microsoft nlayer sample project. Goal is to build a complete application with proper documentation. More to add...GoMusicNow Downloader: This is a simple application created to make things a little easier when downloading a whole album worth of mp3s from the gomusicnow.com web site. To use, simply add your gomusicnow username and password, choose a local folder to download the mp3s to, then paste the url of the gomusicnow 'links' page, for the album you have purchased. Once you hit start, the files will be downloaded sequentially. This application is my first windows application, and first time using WPF. Therefore, I ca...Help A Lot(HAL): Dll to help in the developementHospital: The hospital project is built for my dad's hospital in India. The version one's features to be implemented are: 1. Add or edit patient (Deadline: 6/10/2012) 2. Add or edit medical history of a patient 3. Add or edit patient visit 4. Search existing patients 5. Print discharge reportinControl: Basic Inv ControlLongNile_Projects: Mobile devices projectsNucleo Mobile Detection: This project wraps around Wireless Universal Resource FiLe (WURFL) and provides added server-side mobile detection features for ASP.NET web forms and ASP.NET MVC. It provides controls/helpers and extension methods that make device detection support much easier. It also provides some mobile simulation capabilities for testing purposes.Physical Quantities: This library represents all physical quantities, units of measures, unit systems and unit conversions, as stated in different sources, but mainly on Wikipedia.Proyecto cuarto a: este trabajo es de prueba en codeplex 4to Apython otp: an hmac-based one-time password algorithmRadiation IM: This project aims to create a secure IRC like client (in the main ideas). But it brings a lot of new ideas and makes it a quite good place to discuss and share things. In security.RULI Chain Code Image Generator: RULICCimageGeneratorSharePoint 2010 - Selected items export to excel: Out of the box export to excel feature allows to export the complete view, and not the selected items. In order to achieve the functionality of exporting only selected items to excel.social media solidario: Se trata de desarrollar una aplicación web para escritorio y móvil que ofrezca la posibilidad de que expertos en social media puedan compartir su conocimiento en este área con las ONG , se trata de que respondan las preguntas que las ONG formulen y que todo ese conocimiento quede clasificado y a disposición de todosStarfish: Planning and organisation app for Pilates instructors.testddgit060720121: cxvtestddgit060720122: gftestddhg060720121: ,ktestddtfs060720122: cxvtesttom06072012git01: dsadstesttom06072012hg01: fdstitle: lo mejorWii Game Maker: Wii Game Maker is a program made in VB.NET that was made to allow people with little to no programming experience make their Wii ideas into reality.WoJiudeProject: WoJiudeProjectWpf localization without compile: Localization without recompiling, use it to localize your app. (Including xaml support).zzz: zzz

    Read the article

  • Declarative View Objects (VOs) for better ADF performance

    - by Shay Shmeltzer
    Just got back from ODTUG's kscope13 conference which had a lot of good deep ADF content. In one of my session I ran out of time to do one of my demos, so I wanted to share it here instead. This is a demo of how Declarative View Objects can increase your application's performance. For those who are not familiar with declarative VOs, those are VOs that don't actually specify a hard coded query. Instead ADF creates their query at runtime, and it does it based on the data that is requested in your UI layer. This can be a huge saver of both DB resources and network resources. More in the documentation. Here is a quick example that shows you how using such a VO can automatically switch to a simpler SQL instead of a complex join when needed. (note while I demo with 11.1.2.* the feature is there in 11.1.1.* versions also). The demo also shows you how you can monitor the SQL that ADF BC issues to the database using the WebLogic logging feature in JDeveloper. As a side note, I would have loved to see more ADF developers attending Kscope. This demo was part of the "ADF intro" track at Kscope, In the advanced ADF track you would have been treated to a full tuning session about ADF with lots of other tips. Consider attending Kscope next year - it is going to be in Seattle this time.

    Read the article

  • Give Chromium-Based Browser Desktop Notifications a Native System Look in Ubuntu

    - by Asian Angel
    Desktop notifications from Chromium-based browsers are an awesome feature, but they do not blend in well at all with the native system theming in Ubuntu. Now you can fix that small problem using the wonderful Chromify-OSD extension created by Marco Ceppi. Once you get the extension installed you can give it a quick test run using the link and information we have listed below. As you can see in the image above the new notification style looks absolutely wonderful. Chromify-OSD (Chrome Web Store) [via OMG! Ubuntu!] You can test the new look of the notifications for yourself using the following webpage. Keep in mind that the extension needs to be installed first before this will work though. Note: Enter the following image URL into the Icon Blank (http://www.rgraph.net/images/logo.png) or the URL for an appropriate image, otherwise the notification may not work properly during your test. Chromify Sample HTML5 Notification Test Page The wallpaper shown in the screenshot above can be downloaded here: anime sport [DesktopNexus] Latest Features How-To Geek ETC How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware The Citroen GT – An Awesome Video Game Car Brought to Life [Video] Final Man vs. Machine Round of Jeopardy Unfolds; Watson Dominates Give Chromium-Based Browser Desktop Notifications a Native System Look in Ubuntu Chrome Time Track Is a Simple Task Time Tracker Google Sky Map Turns Your Android Phone into a Digital Telescope Walking Through a Seaside Village Wallpaper

    Read the article

  • How can a large, Fortran-based number crunching codebase be modernized?

    - by Dave Mateer
    A friend in academia asked me for advice (I'm a C# business application developer). He has a legacy codebase which he wrote in Fortran in the medical imaging field. It does a huge amount of number crunching using vectors. He uses a cluster (30ish cores) and has now gone towards a single workstation with 500ish GPUS in it. However where to go next with the codebase so: Other people can maintain it over next 10 year cycle Get faster at tweaking the software Can run on different infrastructures without recompiles After some research from me (this is a super interesting area) some options are: Use Python and CUDA from Nvidia Rewrite in a functional language. For example, F# or Haskell Go cloud based and use something like Hadoop and Java Learn C What has been your experience with this? What should my friend be looking at to modernize his codebase? UPDATE: Thanks @Mark and everyone who has answered. The reasons my friend is asking this question is that it's a perfect time in the projects lifecycle to do a review. Bringing research assistants up to speed in Fortran takes time (I like C#, and especially the tooling and can't imagine going back to older languages!!) I liked the suggestion of keeping the pure number crunching in Fortran, but wrapping it in something newer. Perhaps Python as that seems to be getting a stronghold in academia as a general-purpose programming language that is fairly easy to pick up. See Medical Imaging and a guy who has written a Fortran wrapper for CUDA, Can I legally publish my Fortran 90 wrappers to Nvidias' CUFFT library (from the CUDA SDK)?.

    Read the article

  • Optimizing MySQL -

    - by Josh
    I've been researching how to optimize MySQL a bit, but I still have a few questions. MySQL Primer Results http://pastie.org/private/lzjukl8wacxfjbjhge6vw Based on this, the first problem seems to be that the max_connections limit is too low. I had a similar problem with Apache initially, the max connection limit was set to 100, and the web server would frequently lock up and take an excruciatingly long time to deliver pages. Raising the connection limit to 512 fixed this issue, and I read that raising the connection limit on MySQL to match this was considered good practice. Being that MySQL has actually been "locking up" recently as well (connections have been refused entirely for a few minutes at a time at random intervals) I'm assuming this is the main cause of the issue. However, as far as table cache goes, I'm not sure what I should set this as. I've read that setting this too high can hinder performance further, so should I raise this to right around 551, 560, 600, or do something else? Lastly, as far as raising the join_buffer_size value goes, this doesn't even seem to be included in Debian's my.cnf file by default. Assuming there's not much I can do about adding indexes, should I look into raising this? Any suggested values? Any suggestions in general here would be appreciated as well. Edit: Here's the number of open tables the MySQL server is reporting. I believe this value is related to my question (Opened_tables: 22574)

    Read the article

  • Missed OpenWorld 2011 or JavaOne? See the Key Announcements Today

    - by Dain C. Hansen
    Learn more about Oracle OpenWorld and JavaOne Key Announcements through our six On Demand Webcasts or Podcasts. Your time is precious and you can't make time to watch all keynotes and sessions on demand. Want to get a concise overview on the Oracle OpenWorld and JavaOne key announcements? Presented by Oracle experts in EMEA, these six webcasts will help you decide which keynotes, general or solution sessions on Oracle OpenWorld and JavaOne could be of more interest to you. Six informative, on-demand sessions are available as podcasts and webcasts, on Oracle Hardware and Software, each taking just 15-20 minutes. Be updated in an hour on Oracle OpenWorld on… Oracle Exadata and Exalogic Engineered Systems with Oracle Applications Oracle Exalytics Business Intelligence Machine, the industry's first in-memory hardware and software system Oracle Big Data Appliance, the end-to-end solution for Big Data Oracle Enterprise Manager 12c, the industry's first solution to combine management of the full Oracle stack with complete enterprise cloud lifecycle management Oracle Fusion Applications, a complete suite with 100+ modules Oracle Public Cloud with subscription-based, self-service access to Oracle Fusion Applications, Oracle Fusion Middleware and Oracle Database Watch the Six JavaOne Key Announcement Webcasts anywhere you can access the Internet and learn more about: Plans for advancing the Java Platform, Standard Edition (Java SE) and an update on Java SE 8 Plans announced for the evolution Java Platform, Micro Edition Availability of JavaFX 2.0 The NetBeans IDE Availability for Windows, Mac, Linux and Oracle Solaris Latest developments in the evolution of Java Platform, Enterprise Edition (Java EE). Oracle Java Cloud Service. Follow other informative, on-demand sessions on Oracle Hardware and Software on topics like Cloud, Exadata, Exalogic, Exalytics, Big Data Appliance, Enterprise Manager 12c, Hardware - SuperCluster, Server - and Storage, Oracle Fusion Applications Register now!

    Read the article

  • Sun2Oracle: Upgrading from DSEE to the next generation Oracle Unified Directory - webcast follow up

    - by Darin Pendergraft
    Thanks to all of the guest speakers on our Sun2Oracle webcast: Steve from Hub City Media, Albert from UCLA and our own Scott Bonell. During the webcast, we tried to answer as many questions as we could, but there were a few that we needed a bit more time to answer.  Albert from UCLA sent me the following information: Alternate Directory EvaluationWe were happy with Sun DSEE. OUD, based on the research we had done, was a logical continuation of DSEE.  If we moved away, it was to to go open source. UCLA evaluated OpenLDAP, OpenDS, Red Hat's 389 Directory. We also briefly entertained Active Directory. Ultimately, we decided to stay with OUD for the Enterprise Directory, and adopt OpenLDAP for the non-critical edge directories.HardwareFor Enterprise Directory, UCLA runs 3 Dell PowerEdge R710 servers. Each server has 12GB RAM and 2 2.4GHz Intel Xeon E5 645 processors. We run 2 of those servers at UCLA's Data Center in a semi active-passive configuration. The 3rd server is located at UCLA Berkeley. All three are multi master replicated. At run time, the bulk of LDAP query requests go to 1 server. Essentially, all of our authn/authz traffic is being handled by 1 server, with the other 2 acting as redundant back ups.

    Read the article

  • Accenture Foundation Platform for Oracle (AFPO) – Your pre-build & tested middleware platform

    - by JuergenKress
    The Accenture Foundation Platform for Oracle (AFPO) is a pre-built, tested reference application, common services framework and development accelerator for Oracle’s Fusion Middleware 11g product suite that can help to reduce development time and cost by up to 30 percent. AFPO is a unique accelerator that includes documentation, day one deliverables and quick start virtual machine images, along with access to a skilled team of resources, to reduce risk and cost while improving project quality. It can be delivered all at once or in stages, on-site, hosted, or as a cloud solution. Accenture recently released AFPO v5 for use with their clients. Accenture added significant updates in v5 including Day 1 images & documentation for Webcenter & ADF Mobile that are integrated with 30 other Oracle Middleware products that signifigantly reduced the services aspect to standing these products up. AFPO v5 also features rapid configuration and implementation capabilities for SOA/BPM integrated with Oracle WebCenter Portal, Oracle WebCenter Content, Oracle Business Intelligence, Oracle Identity Management and Oracle ADF Mobile.  AFPO v5 also delivers a starter kit for Oracle SOA Suite which builds upon the integration methodology, leading practices and extended tooling contained within the Oracle Foundation Pack. The combination of the AFPO starter kit and Foundation Pack jump-start and streamline Oracle SOA Suite implementation initiatives, helping to reduce the risk of deploying new technologies and making architectural decisions, so clients can ultimately reduce cost, risk and the time needed for an implementation.  You'll find more information at: Accenture's website:  www.accenture.com/afpo YouTube AFPO Telestration:  http://www.youtube.com/watch?v=_x429DcHEJs Press Release Brochure Contacts: [email protected] Patrick J Sullivan (Accenture – Global Oracle Technology Lead), [email protected] SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: AFPO,Accenture,middleware platform,oracle middleware,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

    Read the article

  • Reflector Pro has now been released!

    - by CliveT
    After moving into the .NET division in May , and having a great time working on Reflector, I'm pleased to say that the results of that work are now available. Reflector Pro has now been released! The old Reflector as you know and love it is still available free of charge, and as part of this project we've fixed a number of bugs in the de-compilation that have been around for a long time. The Pro version comes as an add-in for Visual Studio - this offers dynamic de-compilation and generation of pdb files which allow you to step into the de-compiled code. Alex has some good pictures of this functionality on his beta post from around a month ago. Thanks to the other guys who've worked on this for taking me along for the ride - Alex, Andrew, Bart and Jason. Stephen did some great usability work, Chris Alford did some great technical authoring and Laila handled the launch publicity. Like all projects, there's always more I'd like to have done, but what we have looks like a pretty powerful addition to the developer's set of tools to me. Please try it and give us feedback on the forum.

    Read the article

  • Loading the Cache from the Business Application Server

    - by ACShorten
    By default, the Web Application server will directly connect to the Database to load its cache at startup time. Customers, who implement the product installation in distributed mode, where the Web Application Server and Business Application Server are deployed separately, may wish to prevent the Web Application Server to connect to the database directly. Installation of the product in distributed mode was introduced in Oracle Utilities Application Framework V2.2. In the Advanced Web Application Server configuration, it is possible to set the Create Simple Web Application Context (WEBAPPCONTEXT) to true to force the Web Application Server to load its cache via the Business Application rather than direct loading. The value of false will retain the default behavior of allowing the Web Application Server to connect directly to the database at startup time to load the cache. The value of true will load the cache data via direct calls to the Business Application Server, which can cause a slight delay in the startup process to cater for the architecture load rather than the direct load. The impact of the settings is illustrated in the figure below:                             When setting this value to true, the following properties files should be manually removed prior to executing the product: $SPLEBASE/etc/conf/root/WEB-INF/classes/hibernate.properties $SPLEBASE/splapp/applications/root/WEB-INF/classes/hibernate.properties Note: For customers who are using a local installation, where the Web Application Server and Business Application Server are combined in the deployed server, it is recommended to set this parameter to false, the default, unless otherwise required. This facility is available for Oracle Utilities Application Framework V4.1 in Group Fix 3 (via Patch 11900153) and Patch 13538242 available from My Oracle Support.

    Read the article

  • How to fix bad Collada produced by FBX?

    - by David
    I tried to use the FBX SDK (2011.3.1) to load FBX files and save them as Collada files in order to be able to import FBX files in Panda3D. Unfortunately the resulting Collada files are not usable for several reasons, among them: There's a Maya specific extra technique diffuse <diffuse> <texture texture="Map__2-image" texcoord="CHANNEL0"> <extra> <technique profile="MAYA"> <wrapU sid="wrapU0">TRUE</wrapU> <wrapV sid="wrapV0">TRUE</wrapV> <blend_mode>ADD</blend_mode> </technique> </extra> </texture> </diffuse> It assigns a texcoord channel name that isn't referenced anywhere else in the file (in the previous code sample, no geometry uses "CHANNEL0"...) Every polygon is exported twice, a first time with a basic material (only diffuse color, specular color, etc.) and a second time with a textured material -- this doubles the number of polygons of each model without any valuable reason Anyway, the resulting Collada file cannot be opened correctly either with OpenCOLLADA or Panda3D's "dae2egg". Anyone has any experience on how to "fix" it and make it understandable by common and well-reputed Collada importers such as OpenCOLLADA?

    Read the article

  • How to optimise Andengine's PathModifer (with singleton or pool)?

    - by Casla
    I am trying to build a game where the character find and follows a new path when a new destination is issued by the player, kinda like how units in RTS games work. This is done on a TMX map and I am using the A Star path finder utilities in Andengine to do this.David helped me on that: How can I change the path a sprite is following in real time? At the moment, every-time a new path is issued, I have to abandon the existing PathModifer and Path instances, and create new ones, and from what I read so far, creating new objects when you could re-use existing ones are a big waste for mobile applications. This is how I coded it at the moment: private void loadPathFound() { if (mAStarPath != null) { modifierPath = new org.andengine.entity.modifier.PathModifier.Path(mAStarPath.getLength()); /* replace the first node in the path as the player's current position */ modifierPath.to(player.convertLocalToSceneCoordinates(12, 31)[Constants.VERTEX_INDEX_X]-12, player.convertLocalToSceneCoordinates(12, 31)[Constants.VERTEX_INDEX_Y]-31); for (int i=1; i<mAStarPath.getLength(); i++) { modifierPath.to(mAStarPath.getX(i)*TILE_WIDTH, mAStarPath.getY(i)*TILE_HEIGHT); /* passing in the duration depended on the length of the path, so that the animation has a constant duration for every step */ player.registerEntityModifier(new PathModifier(modifierPath.getLength()/100, modifierPath, null, mIPathModifierListener)); } } The ideal implementation will be to always have just one object of PathModifer and just reset the destination of the path. But I don't know how you can apply the singleton patther on Andengine's PathModifer, there is no method to reset attribute of the path nor the pathModifer. So without re-write the PathModifer and the Path class, or use reflection, is there any other way to implement singleton PathModifer? Thanks for your help.

    Read the article

  • How to create a "retro" pixel shader for transformed 2D sprites that maintains pixel fidelity?

    - by David Gouveia
    The image below shows two sprites rendered with point sampling on top of a background: The left skull has no rotation/scaling applied to it, so every pixel matches perfectly with the background. The right skull is rotated/scaled, and this results in larger pixels that are no longer axis aligned. How could I develop a pixel shader that would render the transformed sprite on the right with axis aligned pixels of the same size as the rest of the scene? This might be related to how sprite scaling was implemented in old games such as Monkey Island, because that's the effect I'm trying to achieve, but with rotation added. Edit As per kaoD's suggestions, I tried to address the problem as a post-process. The easiest approach was to render to a separate render target first (downsampled to match the desired pixel size) and then upscale it when rendering a second time. It did address my requirements above. First I tried doing it Linear -> Point and the result was this: There's no distortion but the result looks blurred and it loses most of the highlights colors. In my opinion it breaks the retro look I needed. The second time I tried Point -> Point and the result was this: Despite the distortion, I think that might be good enough for my needs, although it does look better as a still image than in motion. To demonstrate, here's a video of the effect, although YouTube filtered the pixels out of it: http://youtu.be/hqokk58KFmI However, I'll leave the question open for a few more days in case someone comes up with a better sampling solution that maintains the crisp look while decreasing the amount of distortion when moving.

    Read the article

  • New Enhancements for InnoDB Memcached

    - by Calvin Sun
    In MySQL 5.6, we continued our development on InnoDB Memcached and completed a few widely desirable features that make InnoDB Memcached a competitive feature in more scenario. Notablely, they are 1) Support multiple table mapping 2) Added background thread to auto-commit long running transactions 3) Enhancement in binlog performance  Let’s go over each of these features one by one. And in the last section, we will go over a couple of internally performed performance tests. Support multiple table mapping In our earlier release, all InnoDB Memcached operations are mapped to a single InnoDB table. In the real life, user might want to use this InnoDB Memcached features on different tables. Thus being able to support access to different table at run time, and having different mapping for different connections becomes a very desirable feature. And in this GA release, we allow user just be able to do both. We will discuss the key concepts and key steps in using this feature. 1) "mapping name" in the "get" and "set" command In order to allow InnoDB Memcached map to a new table, the user (DBA) would still require to "pre-register" table(s) in InnoDB Memcached “containers” table (there is security consideration for this requirement). If you would like to know about “containers” table, please refer to my earlier blogs in blogs.innodb.com. Once registered, the InnoDB Memcached will then be able to look for such table when they are referred. Each of such registered table will have a unique "registration name" (or mapping_name) corresponding to the “name” field in the “containers” table.. To access these tables, user will include such "registration name" in their get or set commands, in the form of "get @@new_mapping_name.key", prefix "@@" is required for signaling a mapped table change. The key and the "mapping name" are separated by a configurable delimiter, by default, it is ".". So the syntax is: get [@@mapping_name.]key_name set [@@mapping_name.]key_name  or  get @@mapping_name set @@mapping_name Here is an example: Let's set up three tables in the "containers" table: The first is a map to InnoDB table "test/demo_test" table with mapping name "setup_1" INSERT INTO containers VALUES ("setup_1", "test", "demo_test", "c1", "c2", "c3", "c4", "c5", "PRIMARY");  Similarly, we set up table mappings for table "test/new_demo" with name "setup_2" and that to table "mydatabase/my_demo" with name "setup_3": INSERT INTO containers VALUES ("setup_2", "test", "new_demo", "c1", "c2", "c3", "c4", "c5", "secondary_index_x"); INSERT INTO containers VALUES ("setup_3", "my_database", "my_demo", "c1", "c2", "c3", "c4", "c5", "idx"); To switch to table "my_database/my_demo", and get the value corresponding to “key_a”, user will do: get @@setup_3.key_a (this will also output the value that corresponding to key "key_a" or simply get @@setup_3 Once this is done, this connection will switch to "my_database/my_demo" table until another table mapping switch is requested. so it can continue issue regular command like: get key_b  set key_c 0 0 7 These DMLs will all be directed to "my_database/my_demo" table. And this also implies that different connections can have different bindings (to different table). 2) Delimiter: For the delimiter "." that separates the "mapping name" and key value, we also added a configure option in the "config_options" system table with name of "table_map_delimiter": INSERT INTO config_options VALUES("table_map_delimiter", "."); So if user wants to change to a different delimiter, they can change it in the config_option table. 3) Default mapping: Once we have multiple table mapping, there should be always a "default" map setting. For this, we decided if there exists a mapping name of "default", then this will be chosen as default mapping. Otherwise, the first row of the containers table will chosen as default setting. Please note, user tables can be repeated in the "containers" table (for example, user wants to access different columns of the table in different settings), as long as they are using different mapping/configure names in the first column, which is enforced by a unique index. 4) bind command In addition, we also extend the protocol and added a bind command, its usage is fairly straightforward. To switch to "setup_3" mapping above, you simply issue: bind setup_3 This will switch this connection's InnoDB table to "my_database/my_demo" In summary, with this feature, you now can direct access to difference tables with difference session. And even a single connection, you can query into difference tables. Background thread to auto-commit long running transactions This is a feature related to the “batch” concept we discussed in earlier blogs. This “batch” feature allows us batch the read and write operations, and commit them only after certain calls. The “batch” size is controlled by the configure parameter “daemon_memcached_w_batch_size” and “daemon_memcached_r_batch_size”. This could significantly boost performance. However, it also comes with some disadvantages, for example, you will not be able to view “uncommitted” operations from SQL end unless you set transaction isolation level to read_uncommitted, and in addition, this will held certain row locks for extend period of time that might reduce the concurrency. To deal with this, we introduce a background thread that “auto-commits” the transaction if they are idle for certain amount of time (default is 5 seconds). The background thread will wake up every second and loop through every “connections” opened by Memcached, and check for idle transactions. And if such transaction is idle longer than certain limit and not being used, it will commit such transactions. This limit is configurable by change “innodb_api_bk_commit_interval”. Its default value is 5 seconds, and minimum is 1 second, and maximum is 1073741824 seconds. With the help of such background thread, you will not need to worry about long running uncommitted transactions when set daemon_memcached_w_batch_size and daemon_memcached_r_batch_size to a large number. This also reduces the number of locks that could be held due to long running transactions, and thus further increase the concurrency. Enhancement in binlog performance As you might all know, binlog operation is not done by InnoDB storage engine, rather it is handled in the MySQL layer. In order to support binlog operation through InnoDB Memcached, we would have to artificially create some MySQL constructs in order to access binlog handler APIs. In previous lab release, for simplicity consideration, we open and destroy these MySQL constructs (such as THD) for each operations. This required us to set the “batch” size always to 1 when binlog is on, no matter what “daemon_memcached_w_batch_size” and “daemon_memcached_r_batch_size” are configured to. This put a big restriction on our capability to scale, and also there are quite a bit overhead in creating destroying such constructs that bogs the performance down. With this release, we made necessary change that would keep MySQL constructs as long as they are valid for a particular connection. So there will not be repeated and redundant open and close (table) calls. And now even with binlog option is enabled (with innodb_api_enable_binlog,), we still can batch the transactions with daemon_memcached_w_batch_size and daemon_memcached_r_batch_size, thus scale the write/read performance. Although there are still overheads that makes InnoDB Memcached cannot perform as fast as when binlog is turned off. It is much better off comparing to previous release. And we are continuing optimize the solution is this area to improve the performance as much as possible. Performance Study: Amerandra of our System QA team have conducted some performance studies on queries through our InnoDB Memcached connection and plain SQL end. And it shows some interesting results. The test is conducted on a “Linux 2.6.32-300.7.1.el6uek.x86_64 ix86 (64)” machine with 16 GB Memory, Intel Xeon 2.0 GHz CPU X86_64 2 CPUs- 4 Core Each, 2 RAID DISKS (1027 GB,733.9GB). Results are described in following tables: Table 1: Performance comparison on Set operations Connections 5.6.7-RC-Memcached-plugin ( TPS / Qps) with memcached-threads=8*** 5.6.7-RC* X faster Set (QPS) Set** 8 30,000 5,600 5.36 32 59,000 13,000 4.54 128 68,000 8,000 8.50 512 63,000 6.800 9.23 * mysql-5.6.7-rc-linux2.6-x86_64 ** The “set” operation when implemented in InnoDB Memcached involves a couple of DMLs: it first query the table to see whether the “key” exists, if it does not, the new key/value pair will be inserted. If it does exist, the “value” field of matching row (by key) will be updated. So when used in above query, it is a precompiled store procedure, and query will just execute such procedures. *** added “–daemon_memcached_option=-t8” (default is 4 threads) So we can see with this “set” query, InnoDB Memcached can run 4.5 to 9 time faster than MySQL server. Table 2: Performance comparison on Get operations Connections 5.6.7-RC-Memcached-plugin ( TPS / Qps) with memcached-threads=8 5.6.7-RC* X faster Get (QPS) Get 8 42,000 27,000 1.56 32 101,000 55.000 1.83 128 117,000 52,000 2.25 512 109,000 52,000 2.10 With the “get” query (or the select query), memcached performs 1.5 to 2 times faster than normal SQL. Summary: In summary, we added several much-desired features to InnoDB Memcached in this release, allowing user to operate on different tables with this Memcached interface. We also now provide a background commit thread to commit long running idle transactions, thus allow user to configure large batch write/read without worrying about large number of rows held or not being able to see (uncommit) data. We also greatly enhanced the performance when Binlog is enabled. We will continue making efforts in both performance enhancement and functionality areas to make InnoDB Memcached a good demo case for our InnoDB APIs. Jimmy Yang, September 29, 2012

    Read the article

  • korgac - init.d kill script on shutdown

    - by Max Magnus
    I'm new to Ubuntu 12.04 and Linux and my English is not the best, so I'm sorry for incorrect or stupid questions. I've installed KOrganizer and to start the reminder when I boot the system, I added the korgac command to the autostart. This works fine. But now, every time I want to reboot or shutdown my system, there appears a message that tells me that an unknown process is still running... so I have kill it manually before reboot/shutdown. I knew that it is the korgac process that causes this problem, so I decided to create an init.d script. I've created a script, put it into init.d, and created 2 symbolic links: to rc0.d and to rc6.d. The name starts with K10script... (I hope it is correct so). K10korgac_kill: #! /bin/sh pkill korgac exit 0 Unfortunately this wasn't able to resolve my problem. Maybe my script is wrong. I hope someone can help me. Thanks for your time Max

    Read the article

  • Unity scaling instantiated GameObject at Start() doesn't "keep"

    - by Shivan Dragon
    I have a very simple scenario: A box-like Prefab which is imported from Blender automatically (I have the .blend file in the Assets folder). A script that has two public GameObject fields. In one I place the above prefab, and in the other I place a terrain object (which I've created in Unity's graphical view): public Collider terrain; public GameObject aStarCellHighlightPrefab; This script is attached to the camera. The idea is to have the Blender prefab instantiated, have the terrain set as its parent, and then scale said prefab instance up. I first did it like this, in the Start() method: void Start () { cursorPositionOnTerrain = new RaycastHit(); aStarCellHighlight = (GameObject)Instantiate(aStarCellHighlightPrefab, new Vector3(300,300,300), terrain.transform.rotation); aStarCellHighlight.name = "cellHighlight"; aStarCellHighlight.transform.parent = terrain.transform; aStarCellHighlight.transform.localScale = new Vector3(100,100,100); } and first thought it didn't work. However later I noticed that it did in fact work, in the sense where the scale was applied right at the start, but then right after the prefab instance came back to its initial scale. Putting the scale code in the Update() methods fixes it in the sense where now it stays scaled all the time: void Update () { aStarCellHighlight.transform.localScale = new Vector3(100,100,100); //... } However I've noticed that when I run this code, the object is first displayed without the scale being applied, and it takes about 5-10 seconds for the scale to happen. During this time everything works fine (like input and logging, etc). The scene is very simple, it's not like it has a lot of stuff to load or anything (there's a Ray cast from the camera on to the terrain, but that seems to happen without such delays). My (2 part) question is: Why doesn't it take the scale transform when I do it at the beginning in the Start() method. Why do I have to keep scaling it in the Update() method? Why does it take so long for the scale to "apply/show up".

    Read the article

  • What is an effective git process for managing our central code library?

    - by Mathew Byrne
    Quick background: we're a small web agency (3-6 developers at any one time) developing small to medium sized Symfony 1.4 sites. We've used git for a year now, but most of our developers have preferred Subversion and aren't used to a distributed model. For the past 6 months we've put a lot of development time into a central Symfony plugin that powers our custom CMS. This plugin includes a number of features, helpers, base classes etc. that we use to build custom functionality. This plugin is stored in git, but branches wildly as the plugin is used in various products and is pulled from/pushed to constantly. The repository is usually used as a submodule within a major project. The problems we're starting to see now are a large number of Merge conflicts and backwards incompatible changes brought into the repository by developers adding custom functionality in the context of their own project. I've read Vincent Driessen's excellent git branching model and successfully used it for projects in the past, but it doesn't seem to quite apply well to our particular situation; we have a number of projects concurrently using the same core plugin while developing new features for it. What we need is a strategy that provides the following: A methodology for developing major features within the code repository. A way of migrating those features into other projects. A way of versioning the core repository, and of tracking which version each major project uses. A plan for migrating bug fixes back to older versions. A cleaner history that's easier to see where changes have come from. Any suggestions or discussion would be greatly appreciated.

    Read the article

< Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >