Search Results

Search found 22041 results on 882 pages for 'kill process'.

Page 497/882 | < Previous Page | 493 494 495 496 497 498 499 500 501 502 503 504  | Next Page >

  • Releasing an open source project without getting embarrassed

    - by Hopeful
    I've been working by myself on a fairly large open source project for quite a while and it's nearing the point where I'd like to release it. However, I'm self-taught and I don't really know anyone who could adequately review my project. A few years ago, I had released a small bit of code which pretty much got ripped apart (in a critical sense) on the forum where I released it. Even though the code worked, the criticism was accurate but brutal. It prompted me to begin searching for best practices for everything and in the end I feel that it made me a much better developer. I've gone over everything in my project so many times trying to make it perfect that I've lost count. I believe in my project and think it has the potential to help a lot of people and I feel like I've done some cool things in interesting ways with it. Still, because I'm self-taught, I can't help but wonder what gaps exist in my self-education. The way my code was ripped apart last time isn't something I'd like to repeat. I think my two biggest fears with releasing my project that I've poured countless hours into are being absolutely embarrassed because I missed some patently obvious things because of my self-education or, worse, releasing it to the sound of crickets. Is there anyone who has been in a similar situation? I'm not afraid of constructive criticism, so long as it is constructive and not just a rant on how I screwed up. I know there is a code review site on StackExchange, but it's not really set up for large projects and I didn't feel like the community there is large enough yet to get good feedback if I were to post parts of my project piecemeal (I tried with one file). What can I do to give my project at least some measure of success without getting embarrassed or devestated in the process?

    Read the article

  • Windows 7 backup network restore: "The network location cannot be reached, 0x800704CF"

    - by Znarkus
    When I try to restore from a backup image, I get this error. After I enter the network address (\\10.0.0.1\backup or \\z\backup), the wizard presents me with the network login dialog, which leads me to believe that it can connect to the network (yes, the share is password protected). I decided to install Windows 7, since I thought that I could restore the image from Windows. The restore process in Windows can locate the backups, but to do an image restore it needs to reboot to the wizard above. Which of course gives the very same error. This is what \\z\backup looks like. Please help, I'm getting desperate. Update: Forgot to mention that the NAS is running Ubuntu, if that's relevant.

    Read the article

  • Netbook performs hard shutdown without warning on low battery power

    - by Steve Kroon
    My Asus EEE netbook performs a hard shutdown when it reaches low battery power, without giving any warning - i.e. the power just goes off, without any shutdown process. I can't find anything in the syslog, and no error messages are printed before it happens. I've had this problem on previous (K)Ubuntu versions, and hoped updating to Ubuntu Precise would help resolve the issue, but it hasn't. The option in the Power application for "when power is critically low" is currently blank - the only options are a (grayed-out) hibernate and "Power off". I have re-installed indicator-power to no effect. The time remaining reported by acpi is unstable, as is the time remaining reported by gnome-power-statistics. (For example, running acpi twice in succession, I got 2h16min, and then 3h21min remaining. These sorts of jumps in the remaining time are also in the gnome-power-statistics graphs.) It might be possible to write a script to give me advance warning (as per @RanRag's comment below), but I would prefer to isolate why I don't get a critical battery notification from the system before this happens, so that I can take action as appropriate (suspend/shutdown/plug in power) when I get a notification. Some additional information on the battery: kroon@minia:~$ upower -i /org/freedesktop/UPower/devices/battery_BAT0 native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0A:00/power_supply/BAT0 vendor: ASUS model: 1005P power supply: yes updated: Fri Aug 17 07:31:23 2012 (9 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: charging energy: 33.966 Wh energy-empty: 0 Wh energy-full: 34.9272 Wh energy-full-design: 47.52 Wh energy-rate: 3.7692 W voltage: 12.61 V time to full: 15.3 minutes percentage: 97.248% capacity: 73.5% technology: lithium-ion History (charge): 1345181483 97.248 charging 1345181453 97.155 charging 1345181423 97.062 charging 1345181393 96.970 charging History (rate): 1345181483 3.769 charging 1345181453 3.899 charging 1345181423 4.061 charging 1345181393 4.201 charging kroon@minia:~$ cat /proc/acpi/battery/BAT0/state present: yes capacity state: ok charging state: charging present rate: 332 mA remaining capacity: 3149 mAh present voltage: 12612 mV kroon@minia:~$ cat /proc/acpi/battery/BAT0/info present: yes design capacity: 4400 mAh last full capacity: 3209 mAh battery technology: rechargeable design voltage: 10800 mV design capacity warning: 10 mAh design capacity low: 5 mAh cycle count: 0 capacity granularity 1: 44 mAh capacity granularity 2: 44 mAh model number: 1005P serial number: battery type: LION OEM info: ASUS

    Read the article

  • Unable to install Dockmanager

    - by Mark Rooney
    I have Docky installed on Ubuntu 10.10 64bit and noticed after a recent upgrade my 'Helpers' are no longer available. After some research I found that Dockmanager is no longer installed either. I am unable to install it via the Software centre or via terminal using apt-get, the following error is returned; mark@Sonata:~$ sudo apt-get install dockmanager Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: dockmanager 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/94.4kB of archives. After this operation, 430kB of additional disk space will be used. (Reading database ... 162015 files and directories currently installed.) Unpacking dockmanager (from .../dockmanager_0.1.0~bzr83-0ubuntu1~10.10~dockers1_amd64.deb) ... dpkg: error processing /var/cache/apt/archives/dockmanager_0.1.0~bzr83-0ubuntu1~10.10~dockers1_amd64.deb (--unpack): trying to overwrite '/usr/share/dockmanager/data/skype_invisible.svg', which is also in package faenza-icon-theme 0.8 dpkg-deb: subprocess paste killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/dockmanager_0.1.0~bzr83-0ubuntu1~10.10~dockers1_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) mark@Sonata:~$ Can anyone advise on how to fix this?

    Read the article

  • XOLO X900–First mobile phone with Intel Power

    - by Rekha
    XOLO X900, XOLO’s offering the world’s first smart phone with the power of Intel inside® shaking hands with LAVA International Ltd., India’s fastest growing handset brands. The R&D Centre is in Shenzhan (China) and Bangalore (India). The smart phone has a fast web browsing with the 1.6 GHz Intel processor and smooth multi-tasking process using Intel patented Hyper Threading technology.It has an optimum battery usage, 4.03” hi-resolution of 1024X600 pixels LCD screen to ensure crisp text and vibrant images, HDMI Output port for TV, full HD 1080p playback and dual speakers. It has a camera of 8MP HD camera with certain DSLR like features allowing to click upto 10 photos in less than a second. 3D and HD gaming is immensely realistic with 400 MHz Graphics Processing Unit. The Operating System used here is Android 2.3 (Gingerbread) and upgradable to Android 4.0. It has the GPS facility and rear and front cameras with 8MP and 1.3MP respectively.  They have enabled Accelerometer, Gyroscope, Magnetometer, Ambient light sensor and Proximity sensor in this smart phone. Intel’s smartphone venture is beginning in India first. It is said to be available for sale in Indian from April 23, 2011 onwards. The price is at a best-buy price of INR 22,000 approximately. The smartphone will be available at the Indian retail chain Croma. The phone will available in other retail stores and online stores from early May. The company is launching the smartphone in India first and a more powerful handset in China later this year. According to their success in India and China, Intel is planning to come into Europe and US market. Till then, Intel smartphones are only for Indian buyers. You can more technical information from the XOLO’s site.

    Read the article

  • Can Near Field Communications (NFC) Benefit your Supply Chain?

    - by Stephen Slade
    Leading firms continue to leverage the latest tools and technologies to drive performance especially around minimizing transaction costs. With razor thin margins in manufacturing and distribution, the leading producers are resorting to Near Field Communications to gain efficiencies.  In this week’s CIO magazine (Apr1, 2012, pg.30, see http://www.cio.com)  Lauren Brousell talks of the things you need to know to make a more informed decision with NFC.  Sandy Shen of Gartner says NFC appeals because "it supports any services that requires data transfer and authentication' 1. NFC is Cheap and Easy - short range transmitting technology connecting smartphones to data transfer. 2. Adoption Seems Inevitable - more merchants will use NCF for payments in the futures. Wallets are becoming obsolete. 3. It's a Hot Potato for Enterprise - Business with credit card companies and cell phone providers are debating who handles the billing process. 4. It's in use Overseas. Japan uses FeliCa to pay by smartphone. In the US, billing agreements are causing territorial conflict. 5. Security Risks Come Standard. As people lose HH devices, security will be an ongoing concern. Credentials and timeout features and alleviate to some extent. My prediction: In 5 years, we won't have wallets in our pockets.  Our secure and all-powerful smart phones will be our electronic portable banks and execute the transaction for us based on our preferences and propensities and electronically execute the transaction for the supply chain.

    Read the article

  • Issues running java in Solaris 9 container

    - by Matthew Watson
    Hi, I have a solaris 9 container built from a physical server using flarcreate. Everything seems fine, except when trying to trying to run any "java -server" process it fails with the following error This is on a Sunfire T1000 machine running Solaris 10 10/09 s10s_u8wos_08a SPARC Running jdk1.5.0_15 Exception java.lang.OutOfMemoryError: requested -4 bytes for size_t in /BUILD_AREA/jdk1.5.0_15/hotspot/src/os/solaris/vm/os_solaris.cpp. Out of swap space? As far as I can tell I'm not actually out of swap space. Running java in client mode works without a problem. Googles only suggestion is related to x86. Any suggestions? Thanks.

    Read the article

  • Independent SharePoint Trainer in DC ~ I conduct, teacher-led SHAREPOINT user training anywhere ~

    - by technical-trainer-pro
    Your options: "*interactive" hands-on VIRTUAL or CLASSROOM style training to all SharePoint Users & Site Admin owners.* I also develop customized classes tailored to the specific design of any SharePoint Site - acting as the translator for those left to understand and use it, on an everyday basis. Audience: users,clients,stakeholders,trainers Areas: functionality,operations,management, user site customization,ITIL training, governance process,change mangement and industry or client specific scenerios. INDIVIDUAL RATE- $300 to join any class *(1)* GROUP RATE - $1500 for a private group of (6-10) Flexible Scheduling contact me : [email protected] Local to DC/MD/VA ---can train hands-on anywhere~

    Read the article

  • Installing SQL Server 2005 Express on Windows 8 [closed]

    - by Angel
    We have an application that installs a custom instance of Microsoft SQL Server 2005 Express as part if the whole installation process. Microsoft states that SQL Server 2005 Express is not compatible with Windows 8, but in reality it seems to install and work perfectly fine. The only problem is that during the installation a dialog appears saying it's not compatible, and offers options to get help online, continue with the installation anyway, or cancel. If you chose to continue anyway on all these incompatibility prompts, then the SQL server instance is installed without any problem whatsoever. Does anyone know if there is a way to suppress these incompatibility messages during the SQL service installation (or any installation, for that matter)?

    Read the article

  • Where to download the lastest Windows ISO (legally)?

    - by Doon
    I have the dreamspark MS license. However, everytime I have to install Windows on my PC, I get many updates and this process is long and boring. Is there any way to download the lastest Windows ISO with updates? I'm trying to install Windows 7 (but Windows 8 would also be helpful). Note: I don't want just download windows. I want to download the OS with the lastest updates, those that are downloaded with Windows update after installing it!! Thanks!

    Read the article

  • Free internet radio station server software with remote broadcasting?

    - by Zachary Brown
    I am in the process of creating an internet radio station, but the two djs I have for it are not able to be in one place. I need for them to be able to login to a web based broadcasting session that still has full functionality. They need to be able to broadcast thier live shows with talk and music. The music will be stroed on the server. I have checked out the Broadwave media streaming server from NCH, but ti does not have the ability to login as a dj from a remote computer. I don't have any money for this, so I need it to be free. If this is not possible, I need it to be cheap!

    Read the article

  • SharePoint Web Part Constructor Fires Twice When Adding it to the Page (and has a different security

    - by Damon
    We had some exciting times debugging an interesting issue with SharePoint 2007 Web Parts.  We had some code in staging that had been running just fine for weeks and had not been touched or changed in about the same amount of time.  However, when we tried to move the web part into a different staging environment, the part started throwing a security exception when we tried to add it to a page.  After a bit of debugging, we determined that the web part was throwing the exception while trying to access the SPGroups property on the SharePoint site.  This was pretty strange because we were logged in as an admin and the code was working perfectly fine before.  During the debugging process, however, we found out that the web part constructor was being fired twice.  On one request, the security context did not seem to have everything it needed in order to run.  On the other request, the security context was populated with the user context with the user making the request (like it normally is).  Moving the security code outside of the constructor seems to have fixed the issue. Why the discrepancy between the two staging environments?  Turns out we deployed the part originally, then deployed an update with the security code.  Since the part was never "added" to the page after the code updates were made (we just deployed a new assembly to make the updates), we never saw the problem.  It seems as though the constructor fires twice when you are adding the web part to the page, and when you run the web part from the web part gallery.  My only thought on why this would occur is that SharePoint is instantiating an instance to get some information from it - which is odd because you would think that would happen with reflection without requiring a new object.  Anyway, the work around is to just not put anything security related inside the constructor, or to do a good job accounting for the possibility of the security context not being present if you are adding the item to the page. Technorati Tags: SharePoint,.NET,Microsoft,ASP.NET

    Read the article

  • Failed to import SLES11 to SCOM2012

    - by siyang
    I try to the import my SLES11 to SCOM 2012, but failed. Below is my simple steps and failed error message. Import SLES11 mp DNS resolve both SCOM and SLES11 Install SCOM Agent and cert. Generated the cert from SLES11 then import it to SCOM, and use scxcertconfig -sign to refresh the cert, and back it to SLES11.(I restart the scxadmin on SLES11, and reboot the SCOM ) 5. On SCOM try to find the SLES11, but failed. Below is the error message. *Message: Certificate signing was not successful. Detials: Standard Output: Failed to start child process '/etc/init.d/scx-cimd' errno=13RETURN CODE:1 Standard Error: Exception Message:*

    Read the article

  • What is the rationale behind Apache Jena's *everything is an interface if possible* design philosophy?

    - by David Cowden
    If you are familiar with the Java RDF and OWL engine Jena, then you have run across their philosophy that everything should be specified as an interface when possible. This means that a Resource, Statement, RDFNode, Property, and even the RDF Model, etc., are, contrary to what you might first think, Interfaces instead of concrete classes. This leads to the use of Factories quite often. Since you can't instantiate a Property or Model, you must have something else do it for you --the Factory design pattern. My question, then, is, what is the reasoning behind using this pattern as opposed to a traditional class hierarchy system? It is often perfectly viable to use either one. For example, if I want a memory backed Model instead of a database-backed Model I could just instantiate those classes, I don't need ask a Factory to give me one. As an aside, I'm in the process of writing a library for manipulating Pearltrees data, which is exported from their website in the form of an RDF/XML document. As I write this library, I have many options for defining the relationships present in the Peartrees data. What is nice about the Pearltrees data is that it has a very logical class system: A tree is made up of pearls, which can be either Page, Reference, Alias, or Root pearls. My question comes from trying to figure out if I should adopt the Jena philosophy in my library which uses Jena, or if I should disregard it, pick my own design philosophy, and stick with it.

    Read the article

  • Running PHP 5.2 FastCGI + Apache on CentOS 5 issue

    - by Goran
    I am trying to setup 2 versions of PHP on Centos 5.9 using this tutorial: http://linuxplayer.org/2011/05/intall-multiple-version-of-php-on-one-server. I have followed I have installed default 5.4.19, and I was trying to setup another 5.2.17 PHP version to be run with Fast CGI and I followed the second part completely. However, when I try to run http://web2.example.com it returns 500 error message. In the apache log there are only 2 lines that repeat: [notice] mod_fcgid: call /var/www/web2/index.php with wrapper /usr/local/php52/bin/fcgiwrapper.sh and [notice] mod_fcgid: process /var/www/web2/index.php(25250) exit(server exited), terminated by calling exit(), return code: 255 Please note that I had to add .php at the and of the FCGIWrapper because apache would not start without it: FCGIWrapper /usr/local/php52/bin/fcgiwrapper.sh .php Also please note that http://web1.example.com with PHP 5.4.19 is working absolutely fine. Please help. Thank you very much in advance.

    Read the article

  • links for 2010-06-04

    - by Bob Rhubart
    @biemond: JEJB Transport and manipulating the Java Response in OSB 11g "JEJB Transport works like the EJB Transport," says Oracle ACE Edwin Biemond, "but the request and response objects are not translated to XML so you can't use XQuery etc. To make things not too hard, OSB 11g makes a XML presentation of the request method and its parameters, which you can use in the Proxy Service." (tags: oracleace soa oracle jejb java) @bex: Oracle UCM jQuery Plugin  "This connector allows you to use jQuery to make UCM Service calls through AJAX, and easily display the results,: says Oracle Ace Director Bex Huff. "This is 100% pure JavaScript, no Java, Idoc, or ADF required!" (tags: oracleace ucm oracle otn enterprise2.0) Oracle Solaris Studio Express 6/10 and its Customer Feedback Program are now available (Oracle Developer Tools Blog) "Oracle Solaris Studio Express 6/10 is available on Solaris 10 (SPARC, x86), OEL 5 (x86), RHEL 5 (x86), SuSE 11 (x86) today and will be available for OpenSolaris in the near future," says Pieter Humphrey. (tags: oracle otn solaris sparc liunux) @soatoday: EA and SOA Should Report to COO "So, who gets EA-- the CIO or VP of a Business? I argue neither! After all, a typical EA goal is to connect the Business and IT together to impart better structure and visibility across the enterprise. I firmly believe that neither should own EA so that neither imparts too much of their organization (i.e bias) on the EA process and deliverables. EA needs to be independent, and it's for all the right reasons." -- Orace ACE Director JOrdan Braunstein (tags: oracleace entarch soa)

    Read the article

  • Hylafax and "No response to MPS"

    - by Joril
    We have an Hylafax 5.2.5 CentOS 5 installation hosted inside a Xen virtual machine. It works quite well, but now I'm in the process of upgrading/migrating it to a KVM virtual machine running Ubuntu 10.04 and Hylafax 5.5.1 (compiled from source using http://sourceforge.net/projects/hylafax/files/hylafax%20debian%20build%20files/ ) The problem I'm having is that - while receiving works fine - sending faxes is extremely unreliable, I get lots of "No response to MPS repeated 3 tries", or "Failure to transmit clean ECM image data." The line, modem and configuration files I'm using are the same as before, so I thought that it could be a KVM scheduling issue, but even setting cpu_shares to 10240 instead of 1024 doesn't change a thing... What else could I try? Here's an example log file http://pastebin.com/cN01cpEs

    Read the article

  • Developing a feature which sole purpose to be taken out?

    - by adib
    What is the name of the pattern in which individual contributors (programmers/designers) developed an artifact for the sole purpose is to serve as a diversion so that management can remove that feature in the final product? This is a folklore I heard from an ex-colleague who used to work at a large game development company. At that company, it is well known that middle management is pressurized to "give inputs" and "make changes" to the product otherwise they risk being seen as not contributing to the project. This situation have delayed many projects because of these superfluous "management inputs". In one project at the above company, the artists and developers created a supernumerary animated character that appears in every cutscene and sticks out like a sore thumb. They designed it in such a way that it can be easily removed before the game is shipped (this was when games were still sold in physical media and not a downloadable product). Obviously the management then voted to remove the animation. On the positive side, management didn't introduced any unnecessary changes that would have delayed the project because they have shown that they provided constructive inputs to the product. This process pattern has a name among game programmers that work in corporates, but I forgot what was the actual name. I believe it's duck-something. Anybody can help pointing out the name and perhaps some rather credible reference to how the pattern develops?.

    Read the article

  • Delete file then run file at startup

    - by Henry Gibson
    I'm running the music player Foobar2000 through Wine at startup. For some reason when I shutdown Ubuntu the Foobar2000 process is ended abnormally in Wine and when it runs next time I get an annoying "start in safe mode?" message. Not a huge problem, but I'd like it fixed. The safe mode message only appears if a file called "running" is present when Foobar2000 starts (if it isn't deleted when closed properly). So by deleting "running" then starting Foobar2000, the message doesn't appear. I thought it would be easy enough to enter this as a startup command, however it doesn't want to work. The command I am using is rm '/home/henry/.wine/drive_c/users/henry/Application Data/foobar2000/running';'/home/henry/.wine/drive_c/Program Files (x86)/foobar2000/foobar2000.exe' which works fine if I just run it from terminal, the file is deleted then foobar2000 runs. Does anyone know why this isn't working at startup? Also, will this run with a terminal visible? How can I make just the gui appear? Thanks

    Read the article

  • Does Juniper Networks provide keyloggers with their software?

    - by orokusaki
    I noticed that I had a "USB Mass Storage Device" plugged in when there wasn't in fact anything plugged in to any USB port. I turned it off via Windows (XP), but it's quite concerning. This was after installing Juniper Networks' software for VPN access to an IT guy's stuff. I also notice there is a service called "dsNcService.exe" which apparently is sending information over the internet (even when I'm not in VPN access). The process restarts itself when I end it. Should I be worried that this software is tracking my keystrokes and broadcasting them to my IT guy?

    Read the article

  • What kind of code would Kent Beck avoid unit testing?

    - by tieTYT
    I've been watching a few of the Is TDD Dead? talks on youtube, and one of the things that surprised me is Kent Beck seems to acknowledge that there are just some kinds of programs that aren't worth unit testing. For example, right here DHH says that Kent Beck is ... very happy to say "Well, TDD doesn't fit in this case, I'm just going to bail" It's frustrating to me that Kent Beck seems to acknowledge this, but nobody asks him to elaborate on it or give concrete examples. I'd like to know the situations where Kent Beck thinks TDD is a bad fit. Nobody can read his mind or speak for him, but I'm hoping he's been transparent enough through his books/tweets/whatever for someone to be able to answer. I'm not necessarily going to take what he says as gospel, but it would be useful to know that the times I've tried TDD and it just felt impossible/useless are situations that he would have bailed on it himself. Or, if it turned out he would have tested that code it'd suggest to me that I was approaching the process very wrong. I also think it would be enlightening to understand why he would bail on such projects. My opinion on why this is not a duplicate of "When is it appropriate to not unit test?" After skimming those answers I'm not satisfied. For example, look at UncleBob's answer. He doesn't even acknowledge that such a situation exists. I really think there's value in understanding Kent Beck's position, not just a general, "What's your opinion?" type of question. After all, he's the father of TDD.

    Read the article

  • can anyone help me through the preparation of Eclipse IDE for android developer in ubuntu 12.04?

    - by csbl
    I'm new to to Linux, in this particular case, to Ubuntu. I have a small android project I have to finnish until this Friday and I'm still stuck with the install and preparing of the development envrironment. The only thing I did was install the Eclipse IDE. I'm still missing the SDK, JAVA and anything else that might be needed. Can someone help me through this? It's only because I'm running out of time to develop, or else I would embarc on a deeper investigation of this OS. I tried the step to install android platforms, through Eclispe-Help-Install New Software, and I got the follwoing error messages, at the end of the process: [2012-06-06 17:35:56 - adb] /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-06-06 17:35:56 - adb] 'adb version' failed! /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-06-06 17:35:56 - adb] Failed to parse the output of 'adb version': Standard Output was: Error Output was: /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-06-06 17:35:56 - adb] /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-06-06 17:35:56 - adb] 'adb version' failed! /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-06-06 17:35:56 - adb] Failed to parse the output of 'adb version': Standard Output was: Error Output was: /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory Can anyone help, please??

    Read the article

  • Are project managers useful in Scrum?

    - by Martin Wickman
    There are three roles defined in Scrum: Team, Product Owner and Scrum Master. There is no project manager, instead the project manager job is spread across the three roles. For instance: The Scrum Master: Responsible for the process. Removes impediments. The Product Owner: Manages and prioritizes the list of work to be done to maximize ROI. Represents all interested parties (customers, stakeholders). The Team: Self manage its work by estimating and distributing it among themselves. Responsible for meeting their own commitments. So in Scrum, there is no longer a single person responsible for project success. There is no command-and-control structure in place. That seems to baffle a lot of people, specifically those not used to agile methods, and of course, PM's. I'm really interested in this and what your experiences are, as I think this is one of the things that can make or break a Scrum implementation. Do you agree with Scrum that a project manager is not needed? Do you think such a role is still required? Why?

    Read the article

  • Unable to restart MySQL server on CENTOS 6.5 x86_64 kvm – server (WHM/cPanel)

    - by Kevin S
    I am not able to restart MySQL server on CENTOS 6.5 x86_64 kvm – server (WHM/cPanel). I am getting following error while trying to restart the MySQL server. Waiting for mysql to restart...............finished. mysqld_safe (/bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/lib/mysql/server.domain.net.pid) running as root with PID 4227 (process table check method) mysqld (/usr/sbin/mysqld --basedir=/ --datadir=/var/lib/mysql --user=mysql --log-error=/var/lib/mysql/server.domain.net.err --open-files-limit=4096 --pid-file=/var/lib/mysql/server.domain.net.pid) running as mysql with PID 4349 (pidfile check method) mysql has failed, please contact the sysadmin (result was "mysql is not running"). I even restarted the server and tried again but same issue.

    Read the article

  • dpkg behaving strangely?

    - by Tom Henderson
    When I use apt to get a package, I have been receiving the same error message. Here is an example trying to install wicd (which is already installed): Reading package lists... Building dependency tree... Reading state information... wicd is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. 3 not fully installed or removed. After this operation, 0B of additional disk space will be used. Setting up tex-common (2.06) ... debconf: unable to initialize frontend: Dialog debconf: (Dialog frontend requires a screen at least 13 lines tall and 31 columns wide.) debconf: falling back to frontend: Readline Running mktexlsr. This may take some time... done. No packages found matching texlive-base. dpkg: error processing tex-common (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of texlive-binaries: texlive-binaries depends on tex-common (>= 2.00); however: Package tex-common is not configured yet. dpkg: error processing texlive-binaries (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of dvipng: dvipng depends on texlive-base-bin; however: Package texlive-base-bin is not installed. Package texlive-binaries which provides texlive-base-bin is not configured yet. dpkg: error processing dvipng (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: tex-common texlive-binaries dvipng E: Sub-process /usr/bin/dpkg returned an error code (1) I'm not sure if this is a problem with apt or with dpkg, but it certainly doesn't look good!

    Read the article

< Previous Page | 493 494 495 496 497 498 499 500 501 502 503 504  | Next Page >