Search Results

Search found 14861 results on 595 pages for 'high speed computing'.

Page 498/595 | < Previous Page | 494 495 496 497 498 499 500 501 502 503 504 505  | Next Page >

• Help with memory usage issues on VPS

  - by Niall Collins

  Hi there, I am running a VPS server with 6 .net web sites/applications running on it. I am having issues with performance on the server, mainly it running out of memory. I contacted the company that lease the server to me and they told me it was because I also had sql server 2008 express also running on the server. So I went ahead and removed this, uninstalled etc. However I still seem to be having issues. For example at present, looking at resource consumption, the virtual memory is: ID: vprvmem Current Use: 894,328,832 bytes Limit: 1,073,741,824 bytes This means useage of ~80%. Is there any way I can check out exactly that applications, web sites, software is taking up most of the servers memory, so I can look at rectifying it. I feel that 80% is much to high to allow for contingency for a spike in traffic. I have got extra memory resources added to the box recently, but I would prefer finding the source of the problem rather than throwing extra memory at it. Maybe these levels are correct and alls running ok, but would like to investigate it to make sure. My knowledge of hardware is limited as I mostly deal in the spectrum of software. So any tools out there that can help me or any pertient advice.

  Read the article

• Creating a tar file with checksums included

  - by wazoox

  Here's my problem : I need to archive to tar files a lot ( up to 60 TB) of big files (usually 30 to 40 GB each). I would like to make checksums ( md5, sha1, whatever) of these files before archiving; however not reading every file twice (once for checksumming, twice for tar'ing) is more or less a necessity to achieve a very high archiving performance (LTO-4 wants 120 MB/s sustained, and the backup window is limited). So I'd need some way to read a file, feeding a checksumming tool on one side, and building a tar to tape on the other side, something along : tar cf - files | tee tarfile.tar | md5sum - Except that I don't want the checksum of the whole archive (this sample shell code does just this) but a checksum for each individual file in the archive. I've studied GNU tar, Pax, Star options. I've looked at the source from Archive::Tar. I see no obvious way to achieve this. It looks like I'll have to hand-build something in C or similar to achieve what I need. Perl/Python/etc simply won't cut it performance-wise, and the various tar programs miss the necessary "plugin architecture". Does anyone know of any existing solution to this before I start code-churning ?

  Read the article

• Apache + PHP via FastCGI

  - by Wilco

  I'm running into some problems while attempting to run PHP via FastCGI in Apache. I have the FastCGI module loaded, but get the following error when attempting to load a page: The requested URL /fastcgi/php54.fcgi/index.php was not found on this server. Somewhere, it seems that the script to be executed is appended to the executable without any spaces. Is this where the problem likely is? Below I've included snippets from my Apache configuration (hopefully this is enough): LoadModule fastcgi_module libexec/apache2/mod_fastcgi.so FastCgiIpcDir /var/run/fastcgi AddHandler fastcgi-script .fcgi FastCgiConfig -autoUpdate -singleThreshold 100 -killInterval 300 AddType application/x-httpd-php .php ScriptAlias /fastcgi/ /Library/WebServer/FCGI-Executables/ <Directory "/Library/WebServer/FCGI-Executables"> Options +ExecCGI SetHandler fastcgi-script Order allow,deny Allow from all <VirtualHost *:80> ServerName www.somedomain.com ServerAdmin [email protected] DocumentRoot "/Web/www.somedomain.com" DirectoryIndex index.html index.php default.html CustomLog /var/log/apache2/access_log combinedvhost ErrorLog /var/log/apache2/error_log Action application/x-httpd-php /fastcgi/php54.fcgi <IfModule mod_ssl.c> SSLEngine Off SSLCipherSuite "ALL:!aNULL:!ADH:!eNULL:!LOW:!EXP:RC4+RSA:+HIGH:+MEDIUM" SSLProtocol -ALL +SSLv3 +TLSv1 SSLProxyEngine On SSLProxyProtocol -ALL +SSLv3 +TLSv1 </IfModule> <Directory "/Web/www.somedomain.com"> Options All -Indexes +ExecCGI +Includes +MultiViews AllowOverride All <IfModule mod_dav.c> DAV Off </IfModule> <IfDefine !WEBSERVICE_ON> Deny from all ErrorDocument 403 /customerror/websitesoff403.html </IfDefine> </Directory> </VirtualHost> ... and this is the executable: #!/bin/sh PHP_FCGI_CHILDREN=1 PHP_FCGI_MAX_REQUESTS=5000 export PHP_FCGI_CHILDREN export PHP_FCGI_MAX_REQUESTS exec /opt/local/bin/php-cgi54

  Read the article

• Dos/ Flood Lag even though Port not Saturated

  - by Asad Moeen

  My GameServers had been under some UDP Floods due to which they generated outputs to the attacker which gave the GameServers some huge lags. Thanks to friends at ServerFault that upon different kind of testing, I was able to successfully block the attack. My question is actually something else but it is important to know how the GameServers reacted to the attack and if the machine kept stable or not: 300kb/s Input would cause GameServer to generate 2mb/s Output. So as the Input Rate kept increasing, output rate would reach so high that it would no longer be possible for the GameServer to control it and hence it would give a huge Lag until the attack is stopped. Usually the game server starts to lag when it sends out something greater than 5mb/s and under that is controllable. Theoretically, I was able to receive a 60mb/s output from my GameServer on inputting 10mb/s. Its just the way the GameServer works if not protected. Now on some of my machines, only the GameServer under attack lagged and although the server was generating 60mb/s output, rest of the gameservers on other ports would run fine without lags on the same machine. But there was another machine which also runs on a 100 MBPS Network port, even 1 mbps input ( and ZERO output because attack is blocked ) even on an unused port would give a constant yellow line ( on the Lag-o-Meter ) to all the clients on all GameServers indicating lag because that line is actually blue under normal conditions. It would remain the same even on 50mbps or 900mbps input. I tried contacting the host about it because I believe its the way their Network is bridged, but they can't help me about it. Anyone else knowing about such issues because if 900mbps input does not Saturate the port, how can 1mbps input lag the servers although port is not saturated and enough bandwidth is available?

  Read the article

• dhclient requests filling memory?

  - by shanethehat

  Dammit Jim, I'm a web developer, not a sys admin. With that out of the way, my client's has a CentOS server (6.2) that is only serving a single Magento site (and the associated MySQL server) and it is frequently running out of memory, despite the site only currently being open to 5 users. I'm investigating the logs to try to figure out why the memory usage is so high, but I don't really know what I'm looking at. It seems that there are a lot of entries in /var/log/messages concerning DHCP requests, approximately one every 15 seconds, that look like this: Apr 7 14:23:06 s15940039 dhclient[815]: DHCPREQUEST on eth0 to 172.30.102.85 port 67 (xid=0x6b5cd2a7) Is this normal? I don't see anything else in here that I don't recognise, but then I'm not sure I'd know the problem if I did see it. 4 days ago the server ran out of memory completely and locked up, requiring a restart. The DHCP messages did not start up again for 23 hours, but then carried on as before. I have read this question which describes the same issue, but in my case a fresh DHCP lease does not ever seem to be issued. Is this something I should push back to the hosting provider, or have I not yet found the source of the memory problem?

  Read the article

• SSRS2008R2 report times out, but the underlying query executes in the Management Studio

  - by Matthew Belk

  A customer of mine recently moved servers and the new server has SQL2008R2. His old server was SQL2005. The new server has substantially better CPU, RAM, and disk performance than the old, but several reports time out while executing. When I run the underlying query in the SQL Management Studio, the query executes in sub-second time. The exact error message returned via the Report Manager UI is: An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database. (rsReportServerDatabaseError) Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. It must be noted that this database is not just analytical; it's also fairly transactional, although the transaction volume is not exceptionally high. What can I do to improve the performance of the SSRS query engine? Are there settings in the data source I can adjust, or in the SSRS config files?

  Read the article

• Database mirroring login failure attempts on mirror server

  - by Chandan

  I have configured database mirroring between two servers at a distance 40 miles away from each other. Server specifications: SQL Server 2008,Standard Edition 64-bit This is same for principal,mirror and witness. The configuration is high-safety with automatic failover Initially we tested our .net application(web application) on both the principal and mirror and made sure that the login is not orpahned. Things run fine generally.But sometimes on the mirror server,I see login failed attempts: Login failed for user 'd0main\user'. Reason: Failed to open the explicitly specified database. [CLIENT: xx.xx.x.x] Message Error: 18456, Severity: 14, State: 38. This error appears 3-4 times a day but not more than that. My question to the experts is:If the principal is alive so why the application tries to connect to mirror.The default time-out for a .net webpage is 30 seconds,so is it possible that the application tries to connect principal and after 30 seconds even if principal is alive,it assumes that it is dead and thus tries to open a connection to mirror where it fails. Please help me with this problem.

  Read the article

• Alternative software for Pinnacle PCTV 100e

  - by Stijn Sanders

  I have a Pinnacle PCTV 100e external USB cable television receiver. I've been using Pinnacle's software that came with the card (TVCenter Pro) to record things at given times. Things I don't like is an extremely high CPU load, and that it doesn't seem to halt the screensaver from running when watching in full screen. Also, I was away the last two weeks, and the schedules went terribly bust. Some items were recorded hours before or after the actual scheduled time (and now I missed some shows), and some recurring schedules weren't converted into the next occurrence correctly! Is there good alternative software that would work with my PCTV 100e? (Preferalby cheap or free) I've tried VLC Player, which gets video, but no audio. I've tried MediaPortal, which crashes when trying to scan for channels. When I select a channel manually, the stored mpg has big errors in encoding and is also missing audio. There's VirtualDub, but that doesn't have ready-made scheduled-recording options. This I can conjure some scheduled scripts for, but I've noticed the sync gets awfully wrong after some time. I've tried Windows Media Center, but it doesn't seem to support the PCTV 100e.

  Read the article

• Lenovo S110 netbook screen resolution Ubuntu

  - by Neigyl R. Noval

  I am still stuck with 800x600 resolution. Here is the output of lspci: 00:00.0 Host bridge: Intel Corporation Device 0bf2 (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Device 0be2 (rev 09) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02) 00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8176 (rev 01) Also, I tried modifying /usr/lib/X11/xorg.conf.d/10-monitor.conf to fix this problem, but still does not work: Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Screen" Identifier "Screen0" Monitor "Monitor0" Device "Card0" SubSection "Display" Viewport 0 0 Depth 1 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 4 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 8 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 15 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" EndSubSection EndSection Section "Device" Identifier "Card0" Driver "vesa" VendorName "Intel Corporation Device" EndSection I'm using Gnome. System Preference Monitor screen resolution sticks to 800x600. What am I going to do?

  Read the article

• Squid with mikrotik router

  - by niren

  I tried to connect squid3 in my network to use high anonymity proxy. This is how my network is right now WAN LINK | ------------- ----------------------------- | Mikrotik Box | | Ubuntu Server with squid3 | ------------- ----------------------------- | / | / ---------------------- | Switch ( Cheap one ) | ---------------------- | | | Client1 Client2 Client3 etc. after this setup I changed squid.conf in Ubuntu server as http_port 8080 acl localhost src xxx.xxx.xxx.xxx(Ubuntu server IP) acl to_localhost dst xxx.xxx.xxx.xxx(Mikrotik router gateway) I assume that redirected http from Mikrotik router will be redirect again to Mikrotik router. uncomment access log /var/log/squid3/access.log add visible_hostname myname save squid.conf and restart squid3 server. Then I have added nat rule in Mikrotik router ip/firewall/nat 1. add chain=dstnat src_address=xxx.xxx.xxx.xxx(ununtu server IP) dst-port=80 protocol=tcp action=accept 2. add chain=dstnat src_address=xxx.xxx.xxx.xxx/28(LAN address) dst-port=80 protocol=tcp action=dst-nat to-address=xxx.xxx.xxx.xxx(ununtu server IP) to-port=8080 now I can not able to access internet from client1 system, If I remove these two nat rule then I can access internet. what is wrong I have made?

  Read the article

• How could Load average numbers from 'htop' exceed 100% CPU utlization?

  - by Joe Huang

  I use 'htop' to monitor my web server. It's recently quite loaded and the Load average is showing something like this: Load average: 3.10 2.56 1.63 I searched the web about these numbers and I found an article about it: http://blog.scoutapp.com/articles/2009/07/31/understanding-load-averages In the article, it says if I have 2 CPUs, 2.0 means 100% CPU utilization. And my VPS has two CPUs, so what does 3.1 mean? How could it exceed 100% CPU utilization? And from these numbers, does it mean I should be wary about the loading now? But the performance seems totally fine, and this is a managed VPS, the hosting company has not notified me any warning about it. During day time, Load average always show these high numbers... here is another snapshot while writing. Load average: 3.03 2.77 1.97 Load average: 0.41 1.29 1.60 <---- 5 more minutes later So I am wondering how much room left for this site to grow in current configurations? What kind of proactive actions I should take in advance? I don't want to wait until the server bursts. Thanks.

  Read the article

• Remote search system for samba shares

  - by fostandy

  I have several shares residing on a samba server in a small business environment that I would like to provide search facilities for. Ideally this would be something like google desktop with some extra features (see below), but lacking this the idea is to take what I can get, or at least get an idea for what is out there. Using google desktop search as a reference model, the principle additional requirement is that it is usable from clients over the network. In addition there are some other notes (note that none of these are hard requirements) The content is always files, residing on a single server, accessible from samba shares. Standard ms office document fare Also a lot of rars and zips which it is necessary to search inside. Permissions support, allowing for user-based control to reflect current permission access in samba shares. The userbase will remain fairly static, so manual management of users is fine. majority of users will be Windows based I know there are plenty of search indexers out there: beagle and tracker seem to be the most popular. Most do not seem to offer access control and web-based/remote search does not seem to be high priority. I've also seen a recent post on the samba mailing list asking for pretty much the exact same thing. (They mention a product called IBM OmniFind Yahoo! Edition and while their initial reception seems positive, I am pretty skeptical. RHEL 4? Firefox 2? Updated much?) edit: similar question here What else is out there? Are you in a similar situation? What do you use?

  Read the article

• simple apache2 reverse proxy setup not working

  - by Nick

  I know what proxy is (very high level), it's just I have never set up one, and it feels like I might be missing some big fat point here. My setup: client server (static IP), runs apache on port 80 proxy (has 2 network cards, one is on the clients network, the other one with a static IP on the server network), runs apache on port 80 I am trying to configure these three machines so that when client requests: http://proxy/machine1 It gets served server's pages at server root URL, i.e. http://server/ I can access client pages just fine. However, when I try accessing a page from the client machine, it simply gets redirected to server's IP address, which it clearly can't access since they are not on the same network: ... <meta http-equiv="REFRESH" content="0;url=http://server/machine1"></meta> <title>Redirect</title> ... My apache2 config is: LoadModule proxy_module /modules/mod_proxy.so LoadModule proxy_http_module /modules/mod_proxy_http.so ProxyRequests off <Proxy *> Order Allow,Deny Allow from all </Proxy> ProxyPass /machine1 http://server:80 <Location /machine1> ProxyPassReverse / </Location> What gives? Thanks!

  Read the article

• How do hdparm's -S and -B options interact?

  - by user697683

  These two options seem confusing. For example: according to the man page -B 254 "does not permit spin-down". However, testing with -B 254 -S 1 the drive does spin down after 5 seconds. -B Query/set Advanced Power Management feature, if the drive supports it. A low value means aggressive power management and a high value means better performance. Possible settings range from values 1 through 127 (which permit spin-down), and values 128 through 254 (which do not permit spin-down). The highest degree of power management is attained with a setting of 1, and the highest I/O performance with a setting of 254. A value of 255 tells hdparm to disable Advanced Power Management altogether on the drive (not all drives support disabling it, but most do). -S Put the drive into idle (low-power) mode, and also set the standby (spindown) timeout for the drive. This timeout value is used by the drive to determine how long to wait (with no disk activity) before turning off the spindle motor to save power. Under such circumstances, the drive may take as long as 30 seconds to respond to a subsequent disk access, though most drives are much quicker. The encoding of the timeout value is somewhat peculiar. A value of zero means "timeouts are disabled": the device will not automatically enter standby mode. Values from 1 to 240 specify multiples of 5 seconds, yielding timeouts from 5 seconds to 20 minutes. Values from 241 to 251 specify from 1 to 11 units of 30 minutes, yielding timeouts from 30 minutes to 5.5 hours. A value of 252 signifies a timeout of 21 minutes. A value of 253 sets a vendor-defined timeout period between 8 and 12 hours, and the value 254 is reserved. 255 is interpreted as 21 minutes plus 15 seconds. Note that some older drives may have very different interpretations of these values.

  Read the article

• Ubuntu Wubi "drive" failure; mount drive in XP?

  - by 618034

  Hi there, I installed the Wubi distribution of Ubuntu on a separate partition (which is silly, since why do I care if Windows can still manage the partition?) a few months back; it was pretty awesome, until Linux hosed. At this point, I can get Ubuntu to boot if I try really hard through grub, but once it does start, the screen is hosed, so no dice. At this point, I'd like to wipe it all and start over, but I need to get some stuff off the "disk". The Wubi install makes this difficult, since the "disk" is a flat file on an NTFS partition. I've done just about everything I can think of — I renamed the virtual disk .iso, mounted it with VirtualCloneDrive, then used whatever magic EXT3 (EXT4?) readers I could dig up on the Internet to parse the mount — but nothing's working. Can you offer any suggestions? The "disk" is currently in D:\ubuntu\disks\root.iso. Many thanks! (I may be high-latency at the moment, apologies if I don't address follow-ups quickly)

  Read the article

• What are the most important aspects to consider when choosing a SAN for a small office virtualizatio

  - by Prof. Moriarty

  I am in the process of consolidating 6 physical servers running 6 different operating system flavors (don't ask) into two identical physical servers (Dell PowerEdge 2900), using the free VMware ESXi 4.0 platform. We will install an iSCSI SAN over a 1GbE network, and store all virtual machine images on the SAN. Each physical server would run 3 VMs, and in the case of a physical server failure, we would manually switch over the other 3. These are all internal servers, while important, they can tolerate some amount of downtime (say <1h) to keep cost and complexity associated with HA down. I now need to choose the SAN to be used for the setup, on a low budget. We currently have about 2TB of data, but of course I want to able to grow, do backups of VM snapshots on other drives and remove them to a different location, etc. So what I would like to know is: Which are the must have features for this setup, without which using a SAN is not worth it? We are mostly a Dell shop, so I have been looking at the EqualLogic PS4000E High Availability model. Any opinions, anecdotes, bad experiences with this model? (This is one of the few models which could accomodate our existing disks from the physical servers.) If you can recommend something that is not Dell, but it has better value, I would most definitely consider it. Caveats, things to look out for?

  Read the article

• Typical outbound port list for guest access?

  - by Steve

  I manage a weekly rental house that includes wireless Internet access. I've allowed all outbound ports on my router but my ISP has disabled my Internet access twice now because guests have downloaded (or served up) copyrighted content. So I'd like to institute some port filtering to discourage p2p sharing (see disclaimer below). But I don't want to inconvenience the 99.9% of folks who keep things above-board. My question is, what outbound ports are typically open for rental/hotel wireless Internet access, or where can I find such a list? TCP 80,443,25,110 at a minimum. Though my own email service uses 995 and 465 for SSL, some may use IMAP, I personally use SSH and FTP, so I'll open those. Roughly I figure I need to open access to privileged ports, and close 1024 & above. Is there a whitelist I should institute for commonly used high ports? And does it make sense to block UDP 1024 ? Disclaimer: I realize anyone replying to this message could circumvent the port filtering and share content to their heart's content. I do not need comprehensive p2p blocking, which requires more than a port whitelist. Anyone staying at the house shoulders the responsibility for their Internet use, per the rental contract. Also anyone savvy enough to circumvent the port filters would hopefully be savvy enough to use some sort of peer blocking, thereby preventing the ISP from taking down the service.

  Read the article

• AVCHD MTS h264 1080p file with choppy playback in Linux

  - by marc

  When I'm trying play video files from my camera: Seems stream 0 codec frame rate differs from container frame rate: 50.00 (50/1) -> 50.00 (50/1) Input #0, mpegts, from '00027.MTS': Duration: 00:00:38.88, start: 2.884289, bitrate: 16945 kb/s Program 1 Stream #0.0[0x1011]: Video: h264 (High), yuv420p, 1920x1080 [PAR 1:1 DAR 16:9], 50 fps, 50 tbr, 90k tbn, 50 tbc Stream #0.1[0x1100]: Audio: ac3, 48000 Hz, stereo, s16, 256 kb/s … on my Linux computer (Ubuntu 12.04), I get choppy playback. It's completly unusable... I tried: Totem VLC mplayer The result is always same issue. I sent the same video file to a friend who has ubuntu 10.04 to test, and he also has the same issue. He has Windows 7, and confirms that on Windows, the video work well. I have an Intel® Core™2 CPU 6300 @ 1.86GHz × 2 with GF 9600 GT, with closed NVIDIA drivers. This is not any kind of issue with big files playing slow from an HDD issue. I have an SSD drive! I spent the last days and nights, trying hundreds of commands for ffmpeg, handbrake, mencoder... Any of them won't let me create a file with enough quality. I downloaded few movies from YouTube in 1080p, and playback worked well without any big pixels and choppiness. I would like have highest possible quality, I will put following files onto a Blu-ray disk so I don't need to compress them to get a smaller size. I just want smoth playback on my Linux box. On Windows, the same file is working well.

  Read the article

• Reducing video mode switching during Linux boot

  - by Zack

  When I boot up my desktop computer, which only has Linux on it, the video mode and/or console font gets switched four times: When GRUB starts, it switches from 80x25 text to a graphical mode so it can draw a pretty background behind its menu; GRUB then goes back to 80x25 text after I pick something from the menu; When the KMS driver for my video card loads, it switches to a much higher-resolution text mode (I don't know if this is a hardware text mode or not); Finally X starts and it goes graphics and stays that way. I think this last switch does not change the resolution of the video mode, only the graphicalness. I'd like to get rid of as many of these mode switches as possible. Ideally, when GRUB takes over from the BIOS it would go directly to the same high-resolution text mode that the KMS driver selects, and the display would stay in that mode till X starts and brings up graphics. I am under the impression that this is possible by mucking with the kernel command line and/or the GRUB console module load parameters, but I don't know the details. GRUB 1.98+20100706, kernel 2.6.32.15 using Nouveau video drivers. Distro is Debian unstable. Please no answers that involve recompiling anything or cobbling together bleeding-edge kernel/driver combinations, I don't care enough about this to go to that much trouble. EDIT: Tobu suggests setting GRUB_GFXMODE to the full pixel resolution of the monitor, and GRUB_GFXPAYLOAD_LINUX=keep to avoid the mode switch after the menu goes away. This does part of what I want, but winds up being worse overall. There's no mode switch after the menu, but there's still a painfully-slow screen repaint (I should probably just give up on GRUB's gfxmode, it's waaaay too slow at 1920x1200). More seriously, there's now a double mode switch when nouveaufb loads, along with fun-looking error messages in dmesg [ 5.923798] [drm] nouveau 0000:02:00.0: allocated 1920x1200 fb: 0x40250000, bo ffff8801ba5f4600 [ 5.923802] fb: conflicting fb hw usage nouveaufb vs EFI VGA - removing generic driver [ 5.923821] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 1 ("PFIFO_INTR" message repeats 400+ times) [ 5.925609] Console: switching to colour dummy device 80x25 [ 5.925802] Console: switching to colour frame buffer device 240x75

  Read the article

• Starting my own server - basic recommendations and questions [closed]

  - by Ilia Rostovtsev

  Possible Duplicate: Can you help me with my capacity planning? I'm planning to start my own high-performance server and then use collocation services for keeping it up and running. I'm planning to USE it for processing videos and keeping big video site up! (using FFMpeg, MENcoder and etc.) I just need recommendations on whether listed hardware is good enough and will work together well and fast enough. Do I need anything else (missed something). I remember about CPU coolers though! ;) I'm planning to use SSD drives so please tell me if it's going to work just as regular HDDs (but much faster)? Are they going to be used as RAID (is this possible for SSDs)? Here is what I would like to get: Intel ® Server System SR1600URHSR (Urbanna) or Intel® Server System SR1695WBAC 2 x Intel Xeon X5650 4 x 16Gb DDR-III 1333MHz Kingston ECC Reg (KVR13R9D4/16) 3 x (or maybe 4x) 480Gb SSD Intel 520 Series (SSDSC2CW480A3K5) Which server system would be better? Is listed hardware new/good enough and worth buying it at the moment? Should I probably take a look at something slightly more expensive but more up to date and powerful, may be? After all as software I would like to use CentOS 6 64 bit + WHM/CPanel? Any other suggestions on maybe cheaper and same/more powerful server management system but WHM? What most important points to keep in mind when starting/maintaining your own server?

  Read the article

• How to get a higher resolution on Ubuntu 11.04 using an intel chipset

  - by Saif Bechan

  I have a bit slow PC here, so I decided to put Ubuntu 11.04 on it. It use to run Windows Vista on a resolution of 1280x1024, so both my hardware and monitor support it. Now I'm on Ubuntu, but can only run 1024x768, and the screen is not that bright. Its like when you don't have the right drivers on a Windows machine. Now i'm new to linux, so I do not know what do do. I have an onboard Intel chipset i965. Maybe this is some useful information, I read something about it on a forum: lspci 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 02) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01) 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 03:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) Can someone please tell me how I can get the screen better? saif@sodium:~$ xrandr Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0* 800x600 60.3 56.2 848x480 60.0 640x480 59.9

  Read the article

• Load balanced IIS. Should I use NLB, or linux-based reverse proxy, or something else?

  - by growse

  What would be the best approach for load-balancing at least 2-3 Windows 2008 R2 IIS webservers running a multitude of .NET applications? My choices appear to be: 1) Hardware-based network device load balancer, like a Cisco CSS 2) Windows NLB 3) Some sort of linux based proxy, either haproxy or other The three servers sit as VMs on a vSphere farm, so I have the ability to clone to up the instance count in times of high load. I control the switch that the vSphere hosts are plugged into (Cisco 3750), but don't control the switching/routing infrastructure beyond that to the clients. (1) Is too expensive, and probably overkill for my needs. I've included this in case someone figures out a cunning way to do it on my existing network kit, which I doubt. (2) would seem to be the obvious "built-in" option, but seems to be quite fiddly messing around with network interfaces, multicast, and generally other things that seem to be needlessly complex. It's also fairly stupid, in that it can't remove hosts from the pool if they start throwing 500 errors or otherwise go wrong (3) is the most interesting option, as it would appear to offer the most flexibility and customizability, but without having to mess around with the network. However, while I'm familiar with the reverse-proxy capabilities of lighttpd etc, I'm not that well read on other options like HAProxy, which might be able to offer a lot more. Which would you go for, and is there anything I've not thought of?

  Read the article

• No headphone or speakers plugged in - Windows 7 issue

  - by Amit Ranjan

  I am facing a wierd issue between my sound card driver and Windows7(any edition). I have a sony vaio notebook (VPCEB24EN). Two days ago, on start I got diabled wifi, charging and speakers. Then I restart the PC and everthing worked fine. Later on I again restarted my machine, and then I found the my speakers were not working. I thought, restart will work. I restarted many more times but it did'nt work. I searched google and found that , it might be due to : 1. Hardware is not switched on from bios. 2. No hardware. 3. overriding 64-bit drivers with 32-bit drivers. To make it working, I restored my laptop from scratched, but while restoring pc, the realtek HD drivers, it gave me an error 505. I then formatted the drive and installed Win7 Ultimate 32bit (With PC was, Win7 64-bit Home Basic). I got lots of yellow exclamation in device manager, thinking now this will resolve my issue. But Even after the installing all drivers on a fresh installation, I was still with the same position. A red cross on speaker- No Speakers or Headphone plugged in. Please Note: My Laptop is Vaio , E Series, VPCEB24EN. Audio : Intel® High Definition Audio compatible but accepts Realted Audio. While using BIOS Agent, I got Intel Chipset 5 Series Audio Adapter and ATI RV370 Audio adapter found on my board. Installed is Win7 32bit Ultimate. factory default was Win7 64-bit Home Basic Memory: RAM 3GB/ 320GB HDD Display : ATI Mobility Radeon™ HD 5145 Graphics

  Read the article

• AMD switchable graphics are not working OR I don't know how to make them work

  - by Deus Deceit

  I don't know if this is the right place for this question, but I'll give it a shot. I have a Dell Inspiron 17R 5721. It's supposed to be using switchable graphics. It has an Intel HD 4000 and a Radeon HD 8730M and I'm using windows 8. My problem is this, I Installed the drivers that dell gives me but I don't see the AMD graphics card ANYWHERE ( I do see it in device manager but not anywhere else to select and play a game using AMD). I installed the latest drivers from AMD and same thing, I can't run a game with AMD graphics card. I change the applications preferences in the Catalyst control center but even after that, games don't give me the option to select the AMD card, they list only the Intel HD 4000. Can someone tell me what I have to do to make this work? ------------------- After looking around and messing with stuff. I think.... I THINK that you don't really get the option to select a graphics card. Switchable graphics is all about switching automatically depending on application's needs. Cause when I uninstalled AMD's drivers or actually (screwed up lol) games were playing much worse. When I re-installed them, games went back to being good looking. So even if a game sees only the Intel HD 4000 graphics card windows or AMD's drivers will switch to the AMD Readeon graphics card automatically. I hope someone can verify this. Cause seriously I don't think you get to play scyrim with High graphics settings or even ultra with the Intel HD Graphics card. -------------------

  Read the article

• Investigating a potential CPU failure

  - by Jernej

  On a Ubuntu server that I am using for computations I have recently observed that some CPU extensive programs (GUROBI,CPLEX) often segfault. Being in correspondence with tech support of the respective programs I was suggested that it may be a hardware issue. The administrator of the server performed a detailed memtest and it turned out that the RAM modules appear to be fine. Hence I've used the tool mprime to test the CPU and the following two lines appear multiple times durring the execution of the stress tests: [Worker #4 Oct 18 18:47] FATAL ERROR: Rounding was 0.498046875, expected less than 0.4 [Worker #4 Oct 18 18:47] Hardware failure detected, consult stress.txt file. The stress.txt file in itself is not very verbose about what could be the cause of this error so I would like to ask whether anyone here happens to know what could be the cause of this issue? Is there some other test I could perform to nail the problem even further? The temperature of the system (and all cores) was fine during the entire stress test (+69.0°C (high = +80.0°C, crit = +98.0°C)) the CPU in question is a Intel Core i7-2600K CPU @ 3.40GHz and is not overclocked or modified in any way. Also what is interesting that if I run mprime to only stress the CPU all tests pass fine. The error is only triggered when I let mprime stress the CPU+RAM.

  Read the article

< Previous Page | 494 495 496 497 498 499 500 501 502 503 504 505  | Next Page >