Search Results

Search found 13467 results on 539 pages for 'port mapping'.

Page 498/539 | < Previous Page | 494 495 496 497 498 499 500 501 502 503 504 505  | Next Page >

• Schizophrenic Ubuntu 12.10-12.04: Atheros 922 PCI WIFI is disabled in Unity but enabled in terminal - How to getit to work?

  - by zewone

  I am trying to get my PCI Wireless Atheros 922 card to work. It is disabled in Unity: both the network utility and the desktop (see screenshot http://www.amisdurailhalanzy.be/Screenshot%20from%202012-10-25%2013:19:54.png) I tried many different advises on many different forums. Installed 12.10 instead of 12.04, enabled all interfaces... etc. I have read about the aht9 driver... The terminal shows no hw or sw lock for the Atheros card, nevertheless, it is still disabled. Nothing worked so far, the card is still disabled. Any help is much appreciated. Here are more tech details: myuser@adri1:~$ sudo lshw -C network *-network:0 DISABLED description: Wireless interface product: AR922X Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 2 bus info: pci@0000:03:02.0 logical name: wlan1 version: 01 serial: 00:18:e7:cd:68:b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-17-generic firmware=N/A latency=168 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:d8000000-d800ffff *-network:1 description: Ethernet interface product: VT6105/VT6106S [Rhine-III] vendor: VIA Technologies, Inc. physical id: 6 bus info: pci@0000:03:06.0 logical name: eth0 version: 8b serial: 00:11:09:a3:76:4a size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=via-rhine driverversion=1.5.0 duplex=half latency=32 link=no maxlatency=8 mingnt=3 multicast=yes port=MII speed=10Mbit/s resources: irq:18 ioport:d300(size=256) memory:d8013000-d80130ff *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:8.1 logical name: wlan0 serial: 00:11:09:51:75:36 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2500usb driverversion=3.5.0-17-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg myuser@adri1:~$ sudo rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy1: Wireless LAN Soft blocked: no Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no myuser@adri1:~$ dmesg | grep wlan0 [ 15.114235] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready myuser@adri1:~$ dmesg | egrep 'ath|firm' [ 14.617562] ath: EEPROM regdomain: 0x30 [ 14.617568] ath: EEPROM indicates we should expect a direct regpair map [ 14.617572] ath: Country alpha2 being used: AM [ 14.617575] ath: Regpair used: 0x30 [ 14.637778] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control' [ 14.639410] Registered led device: ath9k-phy0 myuser@adri1:~$ dmesg | grep wlan1 [ 15.119922] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready myuser@adri1:~$ lspci -nn | grep 'Atheros' 03:02.0 Network controller [0280]: Atheros Communications Inc. AR922X Wireless Network Adapter [168c:0029] (rev 01) myuser@adri1:~$ sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:11:09:a3:76:4a inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::211:9ff:fea3:764a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5457 errors:0 dropped:0 overruns:0 frame:0 TX packets:2548 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3425684 (3.4 MB) TX bytes:282192 (282.1 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:590 errors:0 dropped:0 overruns:0 frame:0 TX packets:590 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:53729 (53.7 KB) TX bytes:53729 (53.7 KB) myuser@adri1:~$ sudo iwconfig wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on lo no wireless extensions. eth0 no wireless extensions. wlan1 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off myuser@adri1:~$ lsmod | grep "ath9k" ath9k 116549 0 mac80211 461161 3 rt2x00usb,rt2x00lib,ath9k ath9k_common 13783 1 ath9k ath9k_hw 376155 2 ath9k,ath9k_common ath 19187 3 ath9k,ath9k_common,ath9k_hw cfg80211 175375 4 rt2x00lib,ath9k,mac80211,ath myuser@adri1:~$ iwlist scan wlan0 Failed to read scan data : Network is down lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan1 Failed to read scan data : Network is down myuser@adri1:~$ lsb_release -d Description: Ubuntu 12.10 myuser@adri1:~$ uname -mr 3.5.0-17-generic i686  Any help much appreciated... Thanks, Philippe

  Read the article

• Additional new material WebLogic Community

  - by JuergenKress

  Virtual Developer Conference On Demand - Register Updated Book: WebLogic 12c: Distinctive Recipes - Architecture, Development, Administration by Oracle ACE Director Frank Munz - Blog | YouTube Webcast: Migrating from GlassFish to WebLogic - Replay Reliance Commercial Finance Accelerates Time-to-Market, Improves IT Staff Productivity by 70% - Blog | Oracle Magazine Retrieving WebLogic Server Name and Port in ADF Application by Andrejus Baranovskis, Oracle Ace Director - Blog Using Oracle WebLogic 12c with NetBeans IDEOracle ACE Director Markus Eisele walks you through installing and configuring all the necessary components, and helps you get started with a simple Hello World project. Read the article. Video: Oracle A-Team ADF Mobile Persistence SampleThis video by Oracle Fusion Middleware A-Team architect Steven Davelaar demonstrates how to use the ADF Mobile Persistence Sample JDeveloper extension to generate a fully functional ADF Mobile application that reads and writes data using an ADF BC SOAP web service. Watch the video. Java ME 8 ReleaseDownload Java ME today! This release is an implementation of the Java ME 8 standards JSR 360 (CLDC 8) and JSR 361 (MEEP 8), and includes support of alignment with Java SE 8 language features and APIs, an enhanced services-enabled application platform, the ability to "right-size" the platform to address a wide range of target devices, and more. Learn more Download Java ME SDK 8It includes application development support for Oracle Java ME Embedded 8 platforms and includes plugins for NetBeans 8. See the Java ME 8 Developer Tools Documentation to learn JavaOne 2014 Early Bird RateRegister early to save $400 off the onsite price. With the release of Java 8 this year, we have exciting new sessions and an interactive demo space! NetBeans IDE 8.0 Patch UpdateThe NetBeans Team has released a patch for NetBeans IDE 8.0. Download it today to get fixes that enhance stability and performance. Java 8 Questions ForumFor any questions about this new release, please join the conversation on the Java 8 Questions Forum. Java ME 8: Getting Started with Samples and Demo CodeLearn in few steps how to get started with Java ME 8! The New Java SE 8 FeaturesJava SE 8 introduces enhancements such as lambda expressions that enable you to write more concise yet readable code, better utilize multicore systems, and detect more errors at compile time. See What's New in JDK 8 and the new Java SE 8 documentation portal. Pay Less for Java-Related Books!Save 20% on all new Oracle Press books related to Java. Download the free preview sampler for the Java 8 book written by Herbert Schildt, Maurice Naftain, Henrik Ebbers and J.F. DiMarzio. New book: EJB 3 in Action, Second Edition WebLogic 12c Does WebSockets Getting Started by C2B2 Video: Building Robots with Java Embedded Video: Nighthacking TV Watch presentations by Stephen Chin and community members about Java SE, Java Embedded, Java EE, Hadoop, Robots and more. Migrating the Spring Pet Clinic to Java EE 7 Trip report : Jozi JUG Java Day in Johannesburg How to Build GlassFish 4 from Source 4,000 posts later : The Aquarium WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• Migrating a WebLogic Domain from a 32 to a 64 bit JVM/Architecture

  - by adejuanc

  Currently on 32 bit OS which presents a physical constraint when trying to allocate memory. By limit, a 32 bit OS, will not be able to allocate more than 3 GB on a Linux environment, or 2 GB for Windows environment (not considering Physical Address Extension (PAE) implementation, which can increase the maximum allocatable memory). When this limit is reached, a migration to a 64 bit architecture is recommended. Below are the steps on how to install a 64 WebLogic Server version, along with a 64 Bit JVM and then how to migrate the domain to this new environment. Weblogic Server Version: WebLogic Server Version: 10.3.4.0 OS: Linux adejuan-cl.cl.oracle.com 2.6.18-194.el5 #1 SMP Mon Jan 01 22:10:29 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux JVM:java version "1.6.0_22" Java(TM) SE Runtime Environment (build 1.6.0_22-b04) Oracle JRockit(R) (build R28.1.1-13-139783-1.6.0_22-20101206-0136-linux-x86_64, compiled mode) To create migration template: 1. Execute $<WLS_HOME>/wlserver_10.3/common/bin/config_builder.sh 2. Create Domain Template. 3. Select Domain to migrate. 4. Enter the name of template and other info. Click next. 5. Using Add Button, Select libraries you want to add under lib folder. copy jdbc data sources you would like to have under config/jdbc folder. If you want to have log4j configuration, copy log4j.xml under domain_root folder. 6. Select data base for the domain and click next. 7. Enter Admin Server Name and port numbers. Click next. 8. Enter username and password. Click next. Select No if you don want to add users/groups/roles 9. Click next until reach button create. This will create a jar file that is needed for the next action plan. To install and migrate domain to 64 bit architecture. 1. Install JVM Jrockit R28.1.1.13 on environment. (uncompress zip folder on a known location) 2. Go to JRockit_Home/bin and execute $ java -d64 -jar wls1034_generic.jar 3. When prompt, select JRockit JVM in browse menu, and wait for installation to finish. 4. Go to <WLS_HOME>/wlserver_10.3/common/bin and execute $ ./config.sh 5. Select Create a new Weblogic domain 6. Select Base this domain on an existing template and select browse. 7. Select jar file created on previous action plan. 8. Select Name of domain. Maintain in most cases. 9. Select user name and password. Maintain in most cases. 10. Select Jrockit SDK 1.6.0_22 and click next. 11. Confirm all JMS/JDBC/security configuration. 12. On select Optional Configuration, reconfigure if necessary. 13. Check on Configuration summary for all domain configuration. 14. Click on create, to finish up domain import. Note: Always when installing a 64 bit WLS, it's necessary to install first the 64 JVM and then run the generic installer with the -d64 bit option. If this is not performed, the installation will be the 32 default version. For more information, please refer: http://download.oracle.com/docs/cd/E13188_01/jrockit/docs50/dev_faq.html#pae

  Read the article

• BizTalk 2009 - The Community ODBC Adapter: Schema Generation

  - by Stuart Brierley

  Having previously detailed the installation of the Community ODBC Adapter for BizTalk 2009, the next thing I will be looking at is the generation of schemas using this ODBC adapter. Within your BizTalk 2009 project, right click the project and select Add Generated Items.  In the resultant window choose Add Adapter Metadata and click Add to open the Add Adapter Wizard. Check that the BizTalk Server and Database names are correct, select the ODBC adapter and click next. You must now set the connection string. To start with choose set, then new DSN (data source name). You now need to define the Data Source you will be connecting to.  On the User DSN tab select Add add then driver you want to use. In this case I am going to use the MySQL ODBC Driver.  A User DSN will only be visible on the current machine with you as a user. * Although I initially set up a User DSN and this was fine for creating schemas with, I later realised that you actually need a system DSN as the BizTalk host service needs this to be able connect to the database on a receive or send port. You will then be asked to Set up the MySQL ODBC Data Source.  In my case this is a local database making use of named pipes, so I had to make sure that I ticked the "Force use of named pipes" check box and removed the "# The Pipe the MySQL Server will use socket=mysql" line from the mysql.ini; with this is place the connection would fail as there is no apparent way to specify the pipe name in the ODBC driver configuration. This will then update the User DSN tab with the new Data Source.  Make sure that you select it and press OK. Select it again in the Choose Data Source window and press OK.  On the ODBC transport window select next. You will now be presented with the Schema Information window, where you must supply the namespace, type and root element names for your schema. Next choose the type of statement that you will be using to create your schema - in this case I am using a stored procedure. *I later discovered that this option is fine for MySQL stored procedures without input parameters, but failed for MySQL stored procedures with input parameters.  (I will be posting on the way to handle input parameters soon) Next you will need to specify the name of the stored procedure.  In this case I have a simple stored procedure to return all the data held by my TestTable in MySQL. Select * from TestTable; The table itself has three columns: Name, Sex and Married. Selecting finish should now hopefully create your schemas based on the input and output from your stored procedure. In my case I have:   An empty schema for the request; after all I have no parameters for the stored procedure.  A response schema comprised of a Table Record with Name, Sex and Married children. Next I will be looking at the use of the ODBC adpater with: Receive ports Send ports

  Read the article

• JOGL2 test compiles, but doesn't execute - help?

  - by Chuchinyi

  I have a problem with JOGL2. My JOGL2Template.java compiles fine, but executing it results in the following error: D:\java\java\jogl>javac JOGL2Template.java <== compile ok D:\java\java\jogl>java JOGL2Template <== execute error Exception in thread "main" java.lang.ExceptionInInitializerError at javax.media.opengl.GLProfile.<clinit>(GLProfile.java:1176) at JOGL2Template.<init>(JOGL2Template.java:24) at JOGL2Template.main(JOGL2Template.java:57) Caused by: java.lang.SecurityException: no certificate for gluegen-rt.dll in D:\ java\lib\gluegen-rt-natives-windows-i586.jar at com.jogamp.common.util.JarUtil.validateCertificate(JarUtil.java:350) at com.jogamp.common.util.JarUtil.validateCertificates(JarUtil.java:324) at com.jogamp.common.util.cache.TempJarCache.validateCertificates(TempJa rCache.java:328) at com.jogamp.common.util.cache.TempJarCache.bootstrapNativeLib(TempJarC ache.java:283) at com.jogamp.common.os.Platform$3.run(Platform.java:308) at java.security.AccessController.doPrivileged(Native Method) at com.jogamp.common.os.Platform.loadGlueGenRTImpl(Platform.java:298) at com.jogamp.common.os.Platform.<clinit>(Platform.java:207) ... 3 more Here is the JOGL2Template.java source code: import java.awt.Dimension; import java.awt.Frame; import java.awt.event.WindowAdapter; import java.awt.event.WindowEvent; import javax.media.opengl.GLAutoDrawable; import javax.media.opengl.GLCapabilities; import javax.media.opengl.GLEventListener; import javax.media.opengl.GLProfile; import javax.media.opengl.awt.GLCanvas; import com.jogamp.opengl.util.FPSAnimator; import javax.swing.JFrame; /* * JOGL 2.0 Program Template For AWT applications */ public class JOGL2Template extends JFrame implements GLEventListener { private static final int CANVAS_WIDTH = 640; // Width of the drawable private static final int CANVAS_HEIGHT = 480; // Height of the drawable private static final int FPS = 60; // Animator's target frames per second // Constructor to create profile, caps, drawable, animator, and initialize Frame public JOGL2Template() { // Get the default OpenGL profile that best reflect your running platform. GLProfile glp = GLProfile.getDefault(); // Specifies a set of OpenGL capabilities, based on your profile. GLCapabilities caps = new GLCapabilities(glp); // Allocate a GLDrawable, based on your OpenGL capabilities. GLCanvas canvas = new GLCanvas(caps); canvas.setPreferredSize(new Dimension(CANVAS_WIDTH, CANVAS_HEIGHT)); canvas.addGLEventListener(this); // Create a animator that drives canvas' display() at 60 fps. final FPSAnimator animator = new FPSAnimator(canvas, FPS); addWindowListener(new WindowAdapter() { // For the close button @Override public void windowClosing(WindowEvent e) { // Use a dedicate thread to run the stop() to ensure that the // animator stops before program exits. new Thread() { @Override public void run() { animator.stop(); System.exit(0); } }.start(); } }); add(canvas); pack(); setTitle("OpenGL 2 Test"); setVisible(true); animator.start(); // Start the animator } public static void main(String[] args) { new JOGL2Template(); } @Override public void init(GLAutoDrawable drawable) { // Your OpenGL codes to perform one-time initialization tasks // such as setting up of lights and display lists. } @Override public void display(GLAutoDrawable drawable) { // Your OpenGL graphic rendering codes for each refresh. } @Override public void reshape(GLAutoDrawable drawable, int x, int y, int w, int h) { // Your OpenGL codes to set up the view port, projection mode and view volume. } @Override public void dispose(GLAutoDrawable drawable) { // Hardly used. } } Any ideas what might be the cause of these errors?

  Read the article

• Virtualized data centre&ndash;Part three: Architecture

  - by marc dekeyser

  Having the basics (like discussed in the previous articles) is all good and well, but how do we get started on this?! It can be quite daunting after all!   From my own point of view I can absolutely confirm your worries and concerns, but also tell you that it is not as hard as it seems! Deciding on what kind of motherboard to buy, processor and how much memory is an activity you will spend quite some time doing research on. And that is not even mentioning storage! All in all it comes down to setting you expectations and your budget. Probably adjusting your expectations according to your budget :). Processors As a rule of thumb you want VT-D (virtualization) technology built in to the processor allowing you to have 64 bit machines running on your host. Memory The more the better! If you are building a home lab don’t bother with ECC unless you are going to run machines that absolutely should be on all the time and your comfort depends on it! Motherboard Depends on what you are going to do with storage: If you are going the NAS way then the number of SATA port/RAID capabilities do not really matter. If you decide to have a single server with lots of dedicated storage it obviously matters how much SATA ports you will have, alternatively you could use a RAID controller (but these set you back a pretty penny if you want one. DELL 6i’s are usually available for a good bargain if you can find one!). Easiest is to get one with a built-in graphics card (on-board) as you are just adding more heat, power usage and possible points of failure. Networking Just like your choice of motherboard the networking side tends to depend on how you want to go. A single virtualization  host with local storage can usually get away with having a single network card, a cluster or server which uses iSCSI storage tends to have more than one teamed up :). Storage The dreaded beast from the dark! The horror which lives in the forest! The most difficult decision you are going to make in the building of your lab. Why you might ask? Simple my friend, having the right choice of storage can make or break your virtualization solution. The performance of you storage choice will have an important impact on the responsiveness of your virtual machines and the deployment of new machines. It also makes a run with your budget! If you decide to go the NAS route you will be dropping a lot more money than if you would be having just a bunch of disks sitting in a server and manually distributing the virtual machines over the disks. Platform I’m a Microsoftee so Hyper-V is a dead giveaway for me. If you are interested in using VMware I won’t stop you but the rest of my posts will be oriented on Server 2012 Hyper-V (aka 3.0)! What did I use? Before someone asks me this in the comments I’ll give you a quick run down of what I am using. - Intel 2.4 quad core processors (i something something) - 24 GB DDR3 Memory - Single disk in each server (might look at this as I move the servers to 2012) - Synology DS1812+ NAS - 3 network interfaces where possible - HP1800 procurve managed switch I decided to spring for the NAS as I will also be using it for backups and media storage (which is working out quite nicely with my Xbox 360 I must say). At the time of building my 2 boxes (over a year and a half ago) these set me back about 900 euros each so I can image you can build the same or better for a lower price. Next article will be diagramming what I want to achieve and starting a build on the Hyper V 3.0 cluster!

  Read the article

• Need help partitioning when reinstalling Ubuntu 14.04

  - by Chris M.

  I upgraded to 14.04 about a month ago on my HP Mini netbook (about 16 GB hard disk). A few days ago the system crashed (I don't know why but I was using internet at the time). When I restarted the computer, Ubuntu would not load. Instead, I got a message from the BIOS saying Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key I took this to mean that I needed to reinstall 14.04. When I try to reinstall Ubuntu from the USB stick, I choose "Erase disk and install Ubuntu" but then I get a message: Some of the partitions you created are too small. Please make the following partitions at least this large: / 3.3 GB If you do not go back to the partitioner and increase the size of these partitions, the installation may fail. At first I hit Continue to see if it would install anyway, and it gave the message: The attempt to mount a file system with type ext4 in SCSI1 (0,0,0), partition # 1 (sda) at / failed. You may resume partitioning from the partitioning menu. The second time I hit Go Back, and it took me to the following partitioning table: Device Type Mount Point Format Size Used System /dev/sda /dev/sda1 ext4 (checked) 3228 MB Unknown /dev/sda5 swap (not checked) 1063 MB Unknown + - Change New Partition Table... Revert Device for boot loader installation: /dev/sda ATA JM Loader 001 (4.3 GB) At this point I'm not sure what to do. I've never partitioned my hard drive before and I don't want to screw things up. (I'm not particularly tech savvy.) Can you instruct me what I should do. (P.S. I'm afraid the table might not appear as I typed it in.) Results from fdisk: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 4294 MB, 4294967296 bytes 255 heads, 63 sectors/track, 522 cylinders, total 8388608 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda doesn't contain a valid partition table Disk /dev/sdb: 7860 MB, 7860125696 bytes 155 heads, 31 sectors/track, 3194 cylinders, total 15351808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009a565 Device Boot Start End Blocks Id System /dev/sdb1 * 2768 15351807 7674520 b W95 FAT32 ubuntu@ubuntu:~$ Here is what it displays when I open the Disks utility (I tried the screenshot terminal command you suggested but it didn't seem to do anything): 4.3 GB Hard Disk /dev/sda Model: JM Loader 001 (01000001) Size: 4.3 GB (4,294,967,296 bytes) Serial Number: 01234123412341234 Assessment: SMART is not supported Volumes Size: 4.3 GB (4,294,967,296 bytes) Device: /dev/sda Contents: Unknown (There is a button in the utility that when you click it gives the following options: Format... Create Disk Image... Restore Disk Image... Benchmark but SMART Data & Self-Tests... is dimmed out) When I hit F9 Change Boot Device Order, it shows the hard drive as: SATA:PM-JM Loader 001 When I hit F10 to get me into the BIOS Setup Utility, under Diagnostic it shows: Primary Hard Disk Self Test Not Support NetworkManager Tool State: disconnected Device: eth0 Type: Wired Driver: atl1c State: unavailable Default: no HW Address: 00:26:55:B0:7F:0C Capabilities: Carrier Detect: yes Wired Properties Carrier: off When I run command lshw -C network, I get: WARNING: you should run this program as super-user. *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:16 memory:feafc000-feafffff *-network description: Ethernet interface product: AR8132 Fast Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: c0 serial: 00:26:55:b0:7f:0c capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:43 memory:febc0000-febfffff ioport:ec80(size=128) WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

  Read the article

• Head in the Clouds

  - by Tony Davis

  We're just past the second anniversary of the launch of Windows Azure. A couple of years' experience with Azure in the industry has provided some obvious success stories, but has deflated some of the initial marketing hyperbole. As a general principle, Azure seems to work well in providing a Service-Oriented Architecture for services in enterprises that suffer wide fluctuations in demand. Instead of being obliged to provide hardware sufficient for the occasional peaks in demand, one can hire capacity only when it is needed, and the cost of hosting an application is no longer a capital cost. It enables companies to avoid having to scale out hardware for peak periods only to see it underused for the rest of the time. A customer-facing application such as a concert ticketing system, which suffers high demand in short, predictable bursts of activity, is a great example of an application that would work well in Azure. However, moving existing applications to Azure isn't something to be done on impulse. Unless your application is .NET-based, and consists of 'stateless' components that communicate via queues, you are probably in for a lot of redevelopment work. It makes most sense for IT departments who are already deep in this .NET mindset, and who also want 'grown-up' methods of staging, testing, and deployment. Azure fits well with this culture and offers, as a bonus, good Visual Studio integration. The most-commonly stated barrier to porting these applications to Azure is the problem of reconciling the use of the cloud with legislation for data privacy and security. Putting databases in the cloud is a sticky issue for many and impossible for some due to compliance and security issues, the need for direct control over data, and so on. In the face of feedback from the early adopters of Azure, Microsoft has broadened the architectural choices to cater for a wide range of requirements. As well as SQL Azure Database (SAD) and Azure storage, the unstructured 'BLOB and Entity-Attribute-Value' NoSQL storage alternative (which equates more closely with folders and files than a database), Windows Azure offers a wide range of storage options including use of services such as oData: developers who are programming for Windows Azure can simply choose the one most appropriate for their needs. Secondly, and crucially, the Windows Azure architecture allows you the freedom to produce hybrid applications, where only those parts that need cloud-based hosting are deployed to Azure, whereas those parts that must unavoidably be hosted in a corporate datacenter can stay there. By using a hybrid architecture, it will seldom, if ever, be necessary to move an entire application to the cloud, along with personal and financial data. For example that we could port to Azure only put those parts of our ticketing application that capture and process tickets orders. Once an order is captured, the financial side can be processed in our own data center. In short, Windows Azure seems to be a very effective way of providing services that are subject to wide but predictable fluctuations in demand. Have you come to the same conclusions, or do you think I've got it wrong? If you've had experience with Azure, would you recommend it? It would be great to hear from you. Cheers, Tony.

  Read the article

• Deploying Oracle ADF Essentials Applications to Glassfish

  - by Shay Shmeltzer

  With the new Oracle ADF Essentials offering you can now deploy applications that leverage Oracle ADF on the open source Glassfish 3.1 server. Deployment is documented in the official JDeveloper and ADF documentation (here) but below is a summary of the steps and a video of the steps you'll need to take to get a basic Oracle ADF Essentials application to work on GlassFish. Note - to make starting/stopping GlassFish easier for my demo I used my GlassFish extension that you can get here. First we'll install some ADF Runtime libraries on GlassFish Download and install Glassfish (Note - if you also have an Oracle DB on the same machine, you'll want to switch GlassFish's HTTP port to something else instead of 8080). Download the Oracle ADF Essentials packaging - this will get you an adf_essentials.zip file. Copy the adf_essentials.zip to the lib directory of your Glassfish domain - on a default windows install this would be: C:\glassfish3\glassfish\domains\domain1\lib Go the the above lib directory and issue a unzip -j adf_essentials.zip This will extract the ADF libraries to the directory. Now you can start the Glassfish server. Now let's configure Glassfish to handle applications of the ADF type: Invoke the admin console of glassfish (http://localhost:4848) and log into your admin account. Go to Configurations->Server-config->JVM Settings and choose the JVM Options tab Add the following entries: -XX:MaxPermSize=512m (note this entry should already exist so just make sure it has a big enough value) -Doracle.mds.cache=simple While we are in the admin console, we can also define JDBC connections that will be used by our application. Go into Resources->JDBC->JDBC Connection Pools and click to create a New one Give it a name and choose the resource type to be javax.sql.XADataSource and choose Oracle as the Database Driver vendor. Click Next Scroll down to the Additional Properties section and start filling in the information for your database. The values for an Oracle XE will be (user=hr, databaseName = XE, Password=hr, ServerName=localhost, DriverType=thin, PortNumber=1521) Click Finish Click Ping to check your connection works. Now define a new JDBC Resource that will use the pool you just defined. In my example I called the resource jdbc/HRDS You will need this name to match the name in your Application Module connection configuraiton.Now you can re-start the Glassfish server for the changes to take effect. Get an ADF application going (you can use the regular Fusion Application template for this) Go into the project properties of your viewController project, under the deployment section click to edit the deployment profile that is defined there. Go to Platform and choose Glassfish 3.1 from the drop down list. Click ok to go back to your project. Go to Application -> Application Properties-> Deployment Go to Platform and choose Glassfish 3.1 from the drop down list. Click ok to go back to your project. This step will make sure that JDeveloper will autoamtically add the necessary ADF libraries to the EAR file that is being generated for deployment on Glassfish  Go to your Application->Deploy and deploy either to an EAR file or directly to a Glassfish server connection that you created. Things should just work, but if they don't then look up the server.log in the log directory and check out what error is in there. Here is a video demo of the various steps: Note - right now the deployment of an ADF application takes about 2 minutes on my machine we are hoping to be able to improve this timing in the future. People who are more familiar with Glassfish might want to explore using exploded directory deployment and see if they can get it to work.

  Read the article

• New Oracle BI Mobile Demonstration and SampleApp V305 on OTN

  - by Mike.Hallett(at)Oracle-BI&EPM

  Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 There is a new version of the Oracle BI Mobile HD app for iPhones and iPad. So download / update your App now. Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} Then we have also changed the public server for hosting the Oracle BI Mobile Demonstration. This server image is based on the standard OBIEE 11.1.1.7 Sample Application (V305) which you can also download as a VirtualBox Image (this is a turnkey virtual environment with full SampleAppV305 preconfigured) from OTN here.   When your App is on your iPad, go into the “Settings” and “Add Server” to fill in the host location and access details as shown below: · Host = slc02ojq.oracle.com · Port = 7780 · Username = Prodney · Password = Admin123 · Note: SSL and SSO = OFF This same SampleApp V305 Demonstration server can also be accessed from your PC browser @ http://slc02ojq.oracle.com:7780/analytics. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

  Read the article

• How do I get to work my Atheros AR9485 Wireless card in Ubuntu 14.04 LTS?

  - by Ivan Kreimer

  I've recently installed Ubuntu 14.04 LTS in my ASUS D550CA, and so far things have gone great. The only problem I've got is the Wi-Fi. It doesn't work. I've got an Qualcomm Atheros AR9485. I've tried installing the drivers, but the sytem says it doesn't find any. So I started looking around this forum for solutions. I've read every single post from this forum about my Wi-Fi network adapter, and I've found nothing that solves my problem. Let me give you some info about my configuration. Disclaimer: my configuration is in spanish, so if you don't understand something you can either use Google translate, or use your imagination. :D When I run $ sudo lshw -C network this is what I get: *-network DEACTIVATED descripción: Interfaz inalámbrica producto: AR9485 Wireless Network Adapter fabricante: Qualcomm Atheros id físico: 0 información del bus: pci@0000:02:00.0 nombre lógico: wlan0 versión: 01 serie: 28:e3:47:5c:5d:3f anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress bus_master cap_list rom ethernet physical wireless configuración: broadcast=yes driver=ath9k driverversion=3.13.0-34-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn recursos: irq:17 memoria:f7d00000-f7d7ffff memoria:f7d80000-f7d8ffff *-network descripción: Ethernet interface producto: RTL8101E/RTL8102E PCI Express Fast Ethernet controller fabricante: Realtek Semiconductor Co., Ltd. id físico: 0.2 información del bus: pci@0000:03:00.2 nombre lógico: eth0 versión: 06 serie: e0:3f:49:ce:57:49 tamaño: 100Mbit/s capacidad: 100Mbit/s anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuración: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8402-1_0.0.1 10/26/11 ip=181.165.245.39 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s recursos: irq:41 ioport:e000(size=256) memoria:f0004000-f0004fff memoria:f0000000-f0003fff At the beginning, you'll see that it says "*-network DEACTIVATED" (or at least that's what I translated), is that something bad? Then, when I run ipconfig this is what I get: eth0 Link encap:Ethernet direcciónHW e0:3f:49:ce:57:49 Direc. inet:181.165.245.39 Difus.:181.165.245.255 Másc:255.255.255.0 Dirección inet6: fe80::e23f:49ff:fece:5749/64 Alcance:Enlace ACTIVO DIFUSIÓN FUNCIONANDO MULTICAST MTU:1500 Métrica:1 Paquetes RX:221199 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:62025 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:1000 Bytes RX:124409589 (124.4 MB) TX bytes:7471899 (7.4 MB) lo Link encap:Bucle local Direc. inet:127.0.0.1 Másc:255.0.0.0 Dirección inet6: ::1/128 Alcance:Anfitrión ACTIVO BUCLE FUNCIONANDO MTU:65536 Métrica:1 Paquetes RX:2977 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:2977 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:0 Bytes RX:397158 (397.1 KB) TX bytes:397158 (397.1 KB) When I put iwconfig: eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Finally, when I put sudo rfkill list all, I got: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: asus-bluetooth: Bluetooth Soft blocked: no Hard blocked: no I hope anyone can help me solve this, I've searched a lot and found no solution. Thanks a lot.

  Read the article

• Texture displays on Android emulator but not on device

  - by Rob

  I have written a simple UI which takes an image (256x256) and maps it to a rectangle. This works perfectly on the emulator however on the phone the texture does not show, I see only a white rectangle. This is my code: public void onSurfaceCreated(GL10 gl, EGLConfig config) { byteBuffer = ByteBuffer.allocateDirect(shape.length * 4); byteBuffer.order(ByteOrder.nativeOrder()); vertexBuffer = byteBuffer.asFloatBuffer(); vertexBuffer.put(cardshape); vertexBuffer.position(0); byteBuffer = ByteBuffer.allocateDirect(shape.length * 4); byteBuffer.order(ByteOrder.nativeOrder()); textureBuffer = byteBuffer.asFloatBuffer(); textureBuffer.put(textureshape); textureBuffer.position(0); // Set the background color to black ( rgba ). gl.glClearColor(0.0f, 0.0f, 0.0f, 0.5f); // Enable Smooth Shading, default not really needed. gl.glShadeModel(GL10.GL_SMOOTH); // Depth buffer setup. gl.glClearDepthf(1.0f); // Enables depth testing. gl.glEnable(GL10.GL_DEPTH_TEST); // The type of depth testing to do. gl.glDepthFunc(GL10.GL_LEQUAL); // Really nice perspective calculations. gl.glHint(GL10.GL_PERSPECTIVE_CORRECTION_HINT, GL10.GL_NICEST); gl.glEnable(GL10.GL_TEXTURE_2D); loadGLTexture(gl); } public void onDrawFrame(GL10 gl) { gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT); gl.glDisable(GL10.GL_DEPTH_TEST); gl.glMatrixMode(GL10.GL_PROJECTION); // Select Projection gl.glPushMatrix(); // Push The Matrix gl.glLoadIdentity(); // Reset The Matrix gl.glOrthof(0f, 480f, 0f, 800f, -1f, 1f); gl.glMatrixMode(GL10.GL_MODELVIEW); // Select Modelview Matrix gl.glPushMatrix(); // Push The Matrix gl.glLoadIdentity(); // Reset The Matrix gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glEnableClientState(GL10.GL_TEXTURE_COORD_ARRAY); gl.glLoadIdentity(); gl.glTranslatef(card.x, card.y, 0.0f); gl.glBindTexture(GL10.GL_TEXTURE_2D, texture[0]); //activates texture to be used now gl.glVertexPointer(2, GL10.GL_FLOAT, 0, vertexBuffer); gl.glTexCoordPointer(2, GL10.GL_FLOAT, 0, textureBuffer); gl.glDrawArrays(GL10.GL_TRIANGLE_STRIP, 0, 4); gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); gl.glDisableClientState(GL10.GL_TEXTURE_COORD_ARRAY); } public void onSurfaceChanged(GL10 gl, int width, int height) { // Sets the current view port to the new size. gl.glViewport(0, 0, width, height); // Select the projection matrix gl.glMatrixMode(GL10.GL_PROJECTION); // Reset the projection matrix gl.glLoadIdentity(); // Calculate the aspect ratio of the window GLU.gluPerspective(gl, 45.0f, (float) width / (float) height, 0.1f, 100.0f); // Select the modelview matrix gl.glMatrixMode(GL10.GL_MODELVIEW); // Reset the modelview matrix gl.glLoadIdentity(); } public int[] texture = new int[1]; public void loadGLTexture(GL10 gl) { // loading texture Bitmap bitmap; bitmap = BitmapFactory.decodeResource(context.getResources(), R.drawable.image); // generate one texture pointer gl.glGenTextures(0, texture, 0); //adds texture id to texture array // ...and bind it to our array gl.glBindTexture(GL10.GL_TEXTURE_2D, texture[0]); //activates texture to be used now // create nearest filtered texture gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MIN_FILTER, GL10.GL_NEAREST); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MAG_FILTER, GL10.GL_LINEAR); // Use Android GLUtils to specify a two-dimensional texture image from our bitmap GLUtils.texImage2D(GL10.GL_TEXTURE_2D, 0, bitmap, 0); // Clean up bitmap.recycle(); } As per many other similar issues and resolutions on the web i have tried setting the minsdkversion is 3, loading the bitmap via an input stream bitmap = BitmapFactory.decodeStream(is), setting BitmapFactory.Options.inScaled to false, putting the images in the nodpi folder and putting them in the raw folder.. all of which didn't help. I'm not really sure what else to try..

  Read the article

• PHP code works on Chrome, but not on Firefox or IE (send email via HTML form) [on hold]

  - by Cachirro

  My brother has this form: <form id="lista" action="lista2.php" method="post"> <input name="cf_name" type="text" size="50" hidden="yes" class="obscure"> <input name="cf_email" type="text" size="50" hidden="yes" class="obscure"> <textarea name="cf_message" cols="45" rows="10" hidden="yes" class="obscure"> </textarea> <input type="image" name="submit" value="Enviar Lista por Email" src="imagens/lista_email.png" width="40" height="40" onclick="this.form.elements['cf_message'].value = lista_mail;this.form.elements['cf_name'].value = prompt('Escreva o seu nome:', '');this.form.elements['cf_email'].value = prompt('Escreva o seu email:', '');"> <input name="submit2" type="submit" value="Enviar" hidden="yes" class="obscure"> </form> That calls this PHP file: <?php if ( isset($_POST['submit']) ) { // Dados de autenticacao SMTP $smtpinfo['host'] = 'localhost'; $smtpinfo['port'] = '25'; $smtpinfo['auth'] = true; $smtpinfo['username'] = 'xxx'; $smtpinfo['password'] = 'xxx'; // Dados recebidos do formulario $nome = $_POST['cf_name']; $email = $_POST['cf_email']; $mensagem = $_POST['cf_message']; // Inclusão de ficheiro PEAR. Certifique-se que o PEAR está activado no seu alojamento require_once "Mail.php"; // Corpo da mensagem $body = "Nome: ".$nome; $body.= "\n\n"; $body.= nl2br($mensagem); $headers = array ('From' => $email, 'To' => $smtpinfo["username"], 'Subject' => 'Encomenda Website'); $mail_object = Mail::factory('smtp', $smtpinfo); $mail = $mail_object->send($smtpinfo["username"], $headers, $body); if ( PEAR::isError($mail) ) { echo ("<p>" . $mail->getMessage() . "</p>"); } else { echo ('<b><font color="FFFF00">Mensagem enviada com sucesso.<br><br></b>Seu email: ' . $email . '<br><br></font>'); }} ?> This basically sends an email with some selected products, name and email. The problem is that it works perfectly on Chrome, but not on FF or IE. When the submit image is pressed, the URL changes to the PHP file, but it displays a blank page. After display errors activated: ini_set('display_errors',1); ini_set('display_startup_errors',1); error_reporting(-1) FF/IE display blank page and email isn't sent, Chrome sends the email and displays this: Strict Standards: Non-static method Mail::factory() should not be called statically in /var/www/vhosts/[site url]/httpdocs/lista2.php on line 33 Strict Standards: Non-static method PEAR::isError() should not be called statically, assuming $this from incompatible context in /usr/share/php/Mail/smtp.php , dont know if it helps So, what is causing the email to be sent on chrome and not on FF or IE? Thank you.

  Read the article

• Java Mission Control for SE Embedded 8

  - by kshimizu-Oracle

  ????????????Java???·????????????Java Mission Control????Java SE 8 Embedded???????????Java????????????????Java Mission Control?????????JVM?Java????????? CPU?????????? ???????? ?????????? ???????UI???????????????? ????????????????????????????????????????????????????????????(Java Mission Control????????????????????????????????) 1. Java Mission Control??????? Java?????????????? JMX?????(MBean????) ? Java SE Embedded 8?Compact 3?Full JRE?????(???Minimal?VM??????) ????·???? ? Java SE Embedded 8?Full JRE??????(???Minimal?VM??????) ? ???????Java ME 8??????????????? 2. ???????JVM?????     2.1. JMX?????(MBeans???)????? >java -Dcom.sun.management.jmxremote=true               -Dcom.sun.management.jmxremote.port=7091                # ????????              -Dcom.sun.management.jmxremote.authenticate=false   # ????              -Dcom.sun.management.jmxremote.ssl=false                  # SSL??              -jar appliation.jar ? ??????????????????????JVM??????????????????? "-Djava.rmi.server.hostname=192.168.0.20"                     # ?????????IP????/???? ???????????(http://docs.oracle.com/javase/7/docs/technotes/guides/management/faq.html)?5???????????????????????     2.2. ????·????????? JVM????????????????????? "-XX:+UnlockCommercialFeatures -XX:+FlightRecorder" 3. Java Mission Control?????? JDK????????jmc??????????? >"JDK_HOME"/bin/jmc 4. Java Mission Control??JVM??????  Java Mission Control?????????????????????????????????????? - ????????????IP????·??????????????????JVM????????????????????? - ??????????(????·?????)?????????? - ??????????OK??? ????????????????????????????????????????????????????????????Java?????Java Mission Control???????? ??URL) http://www.oracle.com/technetwork/jp/java/javaseproducts/mission-control/index.html http://www.oracle.com/technetwork/jp/java/javaseproducts-old/mission-control/java-mission-control-wp-2008279-ja.pdf http://www.oracle.com/technetwork/java/embedded/resources/tech/java-flight-rec-on-java-se-emb-8-2158734.html

  Read the article

• Oracle at ARM TechCon

  - by Tori Wieldt

  ARM TechCon is a technical conference for hardware and software engineers, Oct. 30-Nov 1 in Santa Clara, California. Days two and three of the conference will be geared towards systems designers and software developers, those interested in building ARM processor-based modules, boards, and systems. It will cover all of the hardware and software, tools, ranging from low-power design, networking and connectivity, open source software, and security. Oracle is a sponsor of ARM TechCon, and will present three Java sessions and a hands-on-lab:  "Do You Like Coffee with Your Dessert? Java and the Raspberry Pi" - The Raspberry Pi, an ARM-powered single board computer running a full Linux distro off an SD card has caused a huge wave of interest among developers. This session looks at how Java can be used on a device such as this. Using Java SE for embedded devices and a port of JavaFX, the presentation includes a variety of demonstrations of what the Raspberry Pi is capable of. The Raspberry Pi also provides GPIO line access, and the session covers how this can be used from Java applications. Prepare to be amazed at what this tiny board can do. (Angela Caicedo, Java Evangelist) "Modernizing the Explosion of Advanced Microcontrollers with Embedded Java" - This session explains why Oracle Java ME Embedded is the right choice for building small, connected, and intelligent embedded solutions, such as industrial control applications, smart sensing, wireless connectivity, e-health, or general machine-to-machine (M2M) functionality---extending your business to new areas, driving efficiency, and reducing cost. The new Oracle Java ME Embedded product brings the benefits of Java technology to microcontroller platforms. It is a full-featured, complete, compliant software runtime with value-add features targeted to the embedded space and has the ability to interface with additional hardware components, remote manageability, and over-the-air software updates. It is accompanied by a feature-rich set of tools free of charge. (Fareed Suliman, Java Product Manager) "Embedded Java in Smart Energy and Healthcare" - This session covers embedded Java products and technologies that enable smart and connect devices in the Smart Energy and Healthcare/Medical industries. (speaker Kevin Lee) "Java SE Embedded Development on ARM Made Easy" - This Hands-on Lab aims to show that developers already familiar with the Java develop/debug/deploy lifecycle can apply those same skills to develop Java applications, using Java SE Embedded, on embedded devices. (speaker Jim Connors) In the Oracle booth #603, you can see the following demos: Industry Solutions with JavaThis exhibit consists of a number of industry solutions and how they can be powered by Java technology deployed on embedded systems.  Examples in consumer devices, home gateways, mobile health, smart energy, industrial control, and tablets all powered by applications running on the Java platform are shown.  Some of the solutions demonstrate the ability of Java to connect intelligent devices at the edge of the network to the datacenter or the cloud as a total end-to-end platform.Java in M2M with QualcommThis station will exhibit a new M2M solutions platform co-developed by Oracle and Qualcomm that enables wireless communications for embedded smart devices powered by Java, and share the types of industry solutions that are possible.  In addition, a new platform for wearable devices based on the ARM Cortex M3 platform is exhibited.Why Java for Embedded?Demonstration platforms will show how traditional development environments, tools, and Java programming skills can be used to create applications for embedded devices.  The advantages that Java provides because of  the runtime's abstraction of software from hardware, modularity and scalability, security, and application portability and manageability are shared with attendees. Drop by and see why Java is an optimal applications platform for embedded systems.

  Read the article

• sending sms to mobile from pc using java [closed]

  - by sjohnfernandas

  hi i need to send sms from pc to mobile phone can u people guide me to achieve? i used the following code to send sms to a mobile from pc but i did not get any output and also not getting any error so guide me and point out the mistakes what i have done. package mobilesms; import java.io.; import java.util.; import javax.comm.*; import java.io.IOException; import java.util.Properties; import java.io.InputStream; import java.io.OutputStream; import java.io.DataInputStream; import java.io.FileInputStream; import java.io.DataOutputStream; import java.io.FileOutputStream; public class ReadSimple implements Runnable, SerialPortEventListener { static CommPortIdentifier portId; static Enumeration portList; OutputStream outputstream; InputStream inputStream; SerialPort serialPort; Thread readThread; public static void main(String[] args) { portList = CommPortIdentifier.getPortIdentifiers(); while (portList.hasMoreElements()) { portId = (CommPortIdentifier) portList.nextElement(); if (portId.getPortType() == CommPortIdentifier.PORT_SERIAL) { if (portId.getName().equals("COM1")) { System.out.println("Found port:COM1 "); ReadSimple reader = new ReadSimple(); } } } } public ReadSimple() { try { serialPort = (SerialPort) portId.open("ReadSimpleApp",500); } catch (PortInUseException e) { System.out.println(e); } try { inputStream = serialPort.getInputStream(); OutputStream out=serialPort.getOutputStream(); String line=""; line="AT"+"r\n"; out.write(line.trim().getBytes()); line=""; line="AT+CMGS=7639808583"+"\r\n"; out.write(line.trim().getBytes()); System.out.print(line); line="helloworld"; //line=”ATD 996544325;”+”\r\n”; out.write(line.trim().getBytes()); } catch (IOException e) { serialPort.close(); System.out.println(e); } // catch(InterruptedException E){E.printStackTrace();} try { serialPort.addEventListener(this); } catch (TooManyListenersException e) {System.out.println(e);} serialPort.notifyondataavailable(true); try { serialPort.setSerialPortParams(9600, SerialPort.DATABITS_8, SerialPort.STOPBITS_1, SerialPort.PARITY_NONE); } catch (UnsupportedCommOperationException e) {System.out.println(e);} readThread = new Thread(this); readThread.start(); } public void run() { try { Thread.sleep(200); } catch (InterruptedException e) {System.out.println(e);} } public void serialEvent(SerialPortEvent event) { switch(event.getEventType()) { case SerialPortEvent.BI: case SerialPortEvent.OE: case SerialPortEvent.FE: case SerialPortEvent.PE: case SerialPortEvent.CD: case SerialPortEvent.CTS: case SerialPortEvent.DSR: case SerialPortEvent.RI: case SerialPortEvent.OUTPUT_BUFFER_EMPTY: break; case SerialPortEvent.DATA_AVAILABLE: byte[] readBuffer = new byte[10]; try { while (inputStream.available() 0) { int numBytes = inputStream.read(readBuffer); } System.out.println(new String(readBuffer)); } catch (IOException e) {System.out.println(e);} break; } } }

  Read the article

• std::vector::size with glDrawElements crashes?

  - by NoobScratcher

  ( win32 / OpenGL 3.3 / GLSL 330 ) I decided after a long time of trying to do a graphical user interface using just opengl graphics to go back to a gui toolkit and so in the process have had to port alot of my code to win32. But I have a problem with my glDrawElement function. my program compiles and runs fine until it gets to glDrawElements then crashes.. which is rather annoying right. so I was trying to figure out why and I found out its std::vector::size member not returning the correct amount of faces in the unsigned interger vector eg, "vector<unsigned int>faces; " so when I use cout << faces.size() << endl; I got 68 elements???? instead of 24 as you can see here in this .obj file: # Blender v2.61 (sub 0) OBJ File: '' # www.blender.org v 1.000000 -1.000000 -1.000000 v 1.000000 -1.000000 1.000000 v -1.000000 -1.000000 1.000000 v -1.000000 -1.000000 -1.000000 v 1.000000 1.000000 -0.999999 v 0.999999 1.000000 1.000001 v -1.000000 1.000000 1.000000 v -1.000000 1.000000 -1.000000 s off f 1 2 3 4 f 5 8 7 6 f 1 5 6 2 f 2 6 7 3 <--- 24 Faces not 68? f 3 7 8 4 f 5 1 4 8 I'm using a parser I created to get the faces/vertexes in my .obj file: char modelbuffer [20000]; int MAX_BUFF = 20000; unsigned int face[3]; FILE * pfile; pfile = fopen(szFileName, "rw"); while(fgets(modelbuffer, MAX_BUFF, pfile) != NULL) { if('v') { Point p; sscanf(modelbuffer, "v %f %f %f", &p.x, &p.y, &p.z); points.push_back(p); cout << " p.x = " << p.x << " p.y = " << p.y << " p.z = " << p.x << endl; } if('f') { sscanf(modelbuffer, "f %d %d %d %d", &face[0], &face[1], &face[2], &face[3]); cout << "face[0] = " << face[0] << " face[1] = " << face[1] << " face[2] = " << face[2] << " face[3] = " << face[3] << "\n"; faces.push_back(face[0] - 1); faces.push_back(face[1] - 1); faces.push_back(face[2] - 1); faces.push_back(face[3] - 1); cout << face[0] - 1 << face[1] - 1 << face[2] - 1 << face[3] - 1 << endl; } } using this struct to store the x,y,z positions also this vector was used with Point: vector<Point>points; struct Point { float x, y, z; }; If someone could tell me why its not working and how to fix it that would be awesome I also provide a pastebin to the full source code if you want a closer look. http://pastebin.com/gznYLVw7

  Read the article

• Violation of the DRY Principle

  - by Onorio Catenacci

  I am sure there's a name for this anti-pattern somewhere; however I am not familiar enough with the anti-pattern literature to know it. Consider the following scenario: or0 is a member function in a class. For better or worse, it's heavily dependent on class member variables. Programmer A comes along and needs functionality like or0 but rather than calling or0, Programmer A copies and renames the entire class. I'm guessing that she doesn't call or0 because, as I say, it's heavily dependent on member variables for its functionality. Or maybe she's a junior programmer and doesn't know how to call it from other code. So now we've got or0 and c0 (c for copy). I can't completely fault Programmer A for this approach--we all get under tight deadlines and we hack code to get work done. Several programmers maintain or0 so it's now version orN. c0 is now version cN. Unfortunately most of the programmers that maintained the class containing or0 seemed to be completely unaware of c0--which is one of the strongest arguments I can think of for the wisdom of the DRY principle. And there may also have been independent maintainance of the code in c. Either way it appears that or0 and c0 were maintained independent of each other. And, joy and happiness, an error is occurring in cN that does not occur in orN. So I have a few questions: 1.) Is there a name for this anti-pattern? I've seen this happen so often I'd find it hard to believe this is not a named anti-pattern. 2.) I can see a few alternatives: a.) Fix orN to take a parameter that specifies the values of all the member variables it needs. Then modify cN to call orN with all of the needed parameters passed in. b.) Try to manually port fixes from orN to cN. (Mind you I don't want to do this but it is a realistic possibility.) c.) Recopy orN to cN--again, yuck but I list it for sake of completeness. d.) Try to figure out where cN is broken and then repair it independently of orN. Alternative a seems like the best fix in the long term but I doubt the customer will let me implement it. Never time or money to fix things right but always time and money to repair the same problem 40 or 50 times, right? Can anyone suggest other approaches I may not have considered? If you were in my place, which approach would you take? If there are other questions and answers here along these lines, please post links to them. I don't mind removing this question if it's a dupe but my searching hasn't turned up anything that addresses this question yet. EDIT: Thanks everyone for all the thoughtful responses. I asked about a name for the anti-pattern so I could research it further on my own. I'm surprised this particular bad coding practice doesn't seem to have a "canonical" name for it.

  Read the article

• Direct3D - Zooming into Mouse Position

  - by roohan

  I'm trying to implement my camera class for a simulation. But I cant figure out how to zoom into my world based on the mouse position. I mean the object under the mouse cursor should remain at the same screen position. My zooming looks like this: VOID ZoomIn(D3DXMATRIX& WorldMatrix, FLOAT const& MouseX, FLOAT const& MouseY) { this->Position.z = this->Position.z * 0.9f; D3DXMatrixLookAtLH(&this->ViewMatrix, &this->Position, &this->Target, &this->UpDirection); } I passed the world matrix to the function because I had the idea to move my drawing origin according to the mouse position. But I cant find out how to calculate the offset in to move my drawing origin. Anyone got an idea how to calculate this? Thanks in advance. SOLVED Ok I solved my problem. Here is the code if anyone is interested: VOID CAMERA2D::ZoomIn(FLOAT const& MouseX, FLOAT const& MouseY) { // Get the setting of the current view port. D3DVIEWPORT9 ViewPort; this->Direct3DDevice->GetViewport(&ViewPort); // Convert the screen coordinates of the mouse to world space coordinates. D3DXVECTOR3 VectorOne; D3DXVECTOR3 VectorTwo; D3DXVec3Unproject(&VectorOne, &D3DXVECTOR3(MouseX, MouseY, 0.0f), &ViewPort, &this->ProjectionMatrix, &this->ViewMatrix, &WorldMatrix); D3DXVec3Unproject(&VectorTwo, &D3DXVECTOR3(MouseX, MouseY, 1.0f), &ViewPort, &this->ProjectionMatrix, &this->ViewMatrix, &WorldMatrix); // Calculate the resulting vector components. float WorldZ = 0.0f; float WorldX = ((WorldZ - VectorOne.z) * (VectorTwo.x - VectorOne.x)) / (VectorTwo.z - VectorOne.z) + VectorOne.x; float WorldY = ((WorldZ - VectorOne.z) * (VectorTwo.y - VectorOne.y)) / (VectorTwo.z - VectorOne.z) + VectorOne.y; // Move the camera into the screen. this->Position.z = this->Position.z * 0.9f; D3DXMatrixLookAtLH(&this->ViewMatrix, &this->Position, &this->Target, &this->UpDirection); // Calculate the world space vector again based on the new view matrix, D3DXVec3Unproject(&VectorOne, &D3DXVECTOR3(MouseX, MouseY, 0.0f), &ViewPort, &this->ProjectionMatrix, &this->ViewMatrix, &WorldMatrix); D3DXVec3Unproject(&VectorTwo, &D3DXVECTOR3(MouseX, MouseY, 1.0f), &ViewPort, &this->ProjectionMatrix, &this->ViewMatrix, &WorldMatrix); // Calculate the resulting vector components. float WorldZ2 = 0.0f; float WorldX2 = ((WorldZ2 - VectorOne.z) * (VectorTwo.x - VectorOne.x)) / (VectorTwo.z - VectorOne.z) + VectorOne.x; float WorldY2 = ((WorldZ2 - VectorOne.z) * (VectorTwo.y - VectorOne.y)) / (VectorTwo.z - VectorOne.z) + VectorOne.y; // Create a temporary translation matrix for calculating the origin offset. D3DXMATRIX TranslationMatrix; D3DXMatrixIdentity(&TranslationMatrix); // Calculate the origin offset. D3DXMatrixTranslation(&TranslationMatrix, WorldX2 - WorldX, WorldY2 - WorldY, 0.0f); // At the offset to the cameras world matrix. this->WorldMatrix = this->WorldMatrix * TranslationMatrix; } Maybe someone has even a better solution than mine.

  Read the article

• MySQL Server 5.6 default my.cnf and my.ini

  - by user12626240

  We've introduced a default my.cnf / my.ini file for MySQL Server that you can now see in the 5.6.8 release candidate: # For advice on how to change settings please see # http://dev.mysql.com/doc/refman/5.6/en/server-configuration-defaults.html [mysqld] # Remove leading # and set to the amount of RAM for the most important data # cache in MySQL. Start at 70% of total RAM for dedicated server, else 10%. # innodb_buffer_pool_size = 128M   # Remove leading # to turn on a very important data integrity option: logging # changes to the binary log between backups. # log_bin   # These are commonly set, remove the # and set as required. # basedir = ..... # datadir = ..... # port = ..... # socket = ..... # server_id = .....   # Remove leading # to set options mainly useful for reporting servers. # The server defaults are faster for transactions and fast SELECTs. # Adjust sizes as needed, experiment to find the optimal values. # join_buffer_size = 128M # sort_buffer_size = 2M # read_rnd_buffer_size = 2M   sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES    There is also a template file called my-default.cnf or my-default.ini that has these lines near the start: # *** DO NOT EDIT THIS FILE. It's a template which will be copied to the # *** default location during install, and will be replaced if you # *** upgrade to a newer version of MySQL.   On Linux systems, the mysql_install_db command will copy the template file to the final location, where the server will read and use the file, removing the extra three lines. On Windows, the installer will create extra settings based on the answers you gave during installation. Neither will overwrite an existing my.cnf or my.ini file. The only initially active setting here is to change the value of  sql_mode from the server default of NO_ENGINE_SUBSTITUTION to NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES. This strict mode changes warnings for some non-standard behaviour into errors. This can cause applications which rely on the non-standard things, like dates that aren't valid, to lose data. If we had just changed the server default, the new setting would affect all servers that lack an explicit sql_mode setting, including those where strict mode is harmful. So we did it in the default file instead because that will only affect new server installations. You should expect that in our next version after 5.6, the server default will include STRICT_TRANS_TABLES. Our Windows installer and some of our connectors already use STRICT_TRANS_TABLES by default. Strict has been our preferred setting for many years and it is good to see some development platforms are using it. If you need the old behaviour, just remove the STRICT_TRANS_TABLES setting. If you do this, please also ask your application provider to make it unnecessary. They can do that by setting the session sql_mode setting in their own connections, so the rest of the applications using the server don't have to have an undesirable default. We've kept this file as small as possible because we found that our old files were too big and confused people. We've also now removed the old my-huge and related example files. One key part of this is the link to the documentation, where we will provide an introduction to some key settings. We'd like to hear your feedback on settings that will benefit most users or are most important to call out for existing users. Please do that by commenting here or if you prefer by adding comments to this bug report.

  Read the article

• Mounting NAS share: Bad Address

  - by Korben

  I've faced to the problem that can't solve. Hope you can help me with it. I have a storage QNAP TS-459U, with it's own Linux, and 'massive1' folder shared, which I need to mount to my Debian server. They are connected by regular patch cord. Debian server has two network interfaces - eth0 and eth1. eth0 is for Internet, eth1 is for QNAP. So, I'm saying this: mount -t cifs //169.254.100.100/massive1/ /mnt/storage -o user=admin , where 169.254.100.100 is an IP of QNAP's interface. The result I get (after entering password): mount error(14): Bad address Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) Tried: mount.cifs, smbmount, with '/' at the end of the network share and without it, and many other variations of that command. And always its: mount error(14): Bad address Funny thing is when I was in Data Center, I had connected my netbook to QNAP by the same scheme (with Fedora 16 on it), and it connected without any problems, I could read/write files on the QNAP's NAS share! So I'm really stuck with the Debian. I can't undrestand where's the difference with Fedora, making this error. Yeah, I've used Google. Couldn't find any useful info. Ping to the QNAP's IP is working, I can log into QNAP's Linux by ssh, telnet on 139's port is working. This is network interface configuration I use in Debian: IP: 169.254.100.1 Netmask: 255.255.0.0 The only diffence in connecting to Fedora and Debian is that in Fedora I've added gateway - 169.254.100.129, but ping to this IP is not working, so I think it's not necessary at all. P.S. ~# cat /etc/debian_version wheezy/sid ~# uname -a Linux host 2.6.32-5-openvz-amd64 #1 SMP Mon Mar 7 22:25:57 UTC 2011 x86_64 GNU/Linux ~# smbtree WORKGROUP \\HOST host server \\HOST\IPC$ IPC Service (host server) \\HOST\print$ Printer Drivers NAS \\MASSIVE1 NAS Server \\MASSIVE1\IPC$ IPC Service (NAS Server) \\MASSIVE1\massive1 \\MASSIVE1\Network Recycle Bin 1 [RAID5 Disk Volume: Drive 1 2 3 4] \\MASSIVE1\Public System default share \\MASSIVE1\Usb System default share \\MASSIVE1\Web System default share \\MASSIVE1\Recordings System default share \\MASSIVE1\Download System default share \\MASSIVE1\Multimedia System default share Please, help me with solving this strange issue. Thanks before.

  Read the article

• SCVMM 2012 R2 - Installing Virtual Switch Fails with Error 2916

  - by Brian M.

  So I've been attempting to teach myself SCVMM 2012 and Hyper-V Server 2012 R2, and I seem to have hit a snag. I've connected my Hyper-V Host to SCVMM 2012 successfully, and created a logical network, logical switch, and uplink port profile (which I essentially blew through with the default settings). However when I attempt to create a virtual switch on my Hyper-V host, I run into an issue. The job will use my logical network settings I created to configure the virtual switch, but when it tries to apply it to the host, it stalls and eventually fails with the following error: Error (2916) VMM is unable to complete the request. The connection to the agent vmhost1.test.loc was lost. WinRM: URL: [h**p://vmhost1.test.loc:5985], Verb: [GET], Resource: [h**p://schemas.microsoft.com/wbem/wsman/1/wmi/root/virtualization/v2/Msvm_ConcreteJob?InstanceID=2F401A71-14A2-4636-9B3E-10C0EE942D33] Unknown error (0x80338126) Recommended Action Ensure that the Windows Remote Management (WinRM) service and the VMM agent are installed and running and that a firewall is not blocking HTTP/HTTPS traffic. Ensure that VMM server is able to communicate with econ-hyperv2.econ.loc over WinRM by successfully running the following command: winrm id –r:vmhost1.test.loc This problem can also be caused by a Windows Management Instrumentation (WMI) service crash. If the server is running Windows Server 2008 R2, ensure that KB 982293 (h**p://support.microsoft.com/kb/982293) is installed on it. If the error persists, restart vmhost1.test.loc and then try the operation again. Refer to h**p://support.microsoft.com/kb/2742275 for more details. I restarted the server, and upon booting am greeted with a message stating "No active network adapters found." I load up powershell and run "Get-NetAdapter -IncludeHidden" to see what's going on, and get the following: Name InterfaceDescription ifIndex Status ---- -------------------- ------- ----- Local Area Connection* 5 WAN Miniport (PPPOE) 6 Di... Ethernet Microsoft Hyper-V Network Switch Def... 10 Local Area Connection* 1 WAN Miniport (L2TP) 2 Di... Local Area Connection* 8 WAN Miniport (Network Monitor) 9 Up Local Area Connection* 4 WAN Miniport (PPTP) 5 Di... Ethernet 2 Broadcom NetXtreme Gigabit Ethernet 13 Up Local Area Connection* 7 WAN Miniport (IPv6) 8 Up Local Area Connection* 9 Microsoft Kernel Debug Network Adapter 11 No... Local Area Connection* 3 WAN Miniport (IKEv2) 4 Di... Local Area Connection* 2 WAN Miniport (SSTP) 3 Di... vSwitch (TEST Test Swi... Hyper-V Virtual Switch Extension Ada... 17 Up Local Area Connection* 6 WAN Miniport (IP) 7 Up Now the machine is no longer visible on the network, and I don't have the slightest idea what went wrong, and more importantly how to undo the damage I caused in order to get back to where I was (save for re-installing Hyper-V Server, but I really would rather know what's going on and how to fix it)! Does anybody have any ideas? Much appreciated!

  Read the article

• ASA hairpining: I basicaly want to allow 2 spokes to be able to communicate with each other.

  - by Thirst4Knowledge

  ASA Spoke to Spoke Communication I have been looking at spke to spoke comms or "hairpining" for months and have posted on numerouse forums but to no avail. I have a Hub and spoke network where the HUB is an ASA Firewall version 8.2 * I basicaly want to allow 2 spokes to be able to communicate with each other. I think that I have got the concept of the ASA Config for example: same-security-traffic permit intra-interface access-list HQ-LAN extended permit ip ASA-LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list HQ-LAN extended permit ip 192.168.99.0 255.255.255.0 HQ-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list no-nat extended permit ip HQ-LAN 255.255.255.0 192.168.99.0 255.255.255.0 access-list no-nat extended permit ip 192.168.99.0 255.255.255.0 HQ-LAN 255.255.255.0 I think my problem may be that the other spokes are not CIsco Firewalls and I need to work out how to do the alternative setups. I want to at least make sure that my firewall etup is correct then I can move onto the other spokes here is my config: Hostname ASA domain-name mydomain.com names ! interface Ethernet0/0 speed 100 duplex full nameif outside security-level 0 ip address 1.1.1.246 255.255.255.224 ! interface Ethernet0/1 speed 100 duplex full nameif inside security-level 100 ip address 192.168.240.33 255.255.255.224 ! interface Ethernet0/2 description DMZ VLAN-253 speed 100 duplex full nameif DMZ security-level 50 ip address 192.168.254.1 255.255.255.0 ! interface Ethernet0/3 no nameif no security-level no ip address ! boot system disk0:/asa821-k8.bin ftp mode passive clock timezone GMT/BST 0 dns server-group DefaultDNS domain-name mydomain.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group network ASA_LAN_Plus_HQ_LAN network-object ASA_LAN 255.255.248.0 network-object HQ-LAN 255.255.255.0 access-list outside_acl remark Exchange web access-list outside_acl extended permit tcp any host MS-Exchange_server-NAT eq https access-list outside_acl remark PPTP Encapsulation access-list outside_acl extended permit gre any host MS-ISA-Server-NAT access-list outside_acl remark PPTP access-list outside_acl extended permit tcp any host MS-ISA-Server-NAT eq pptp access-list outside_acl remark Intra Http access-list outside_acl extended permit tcp any host MS-ISA-Server-NAT eq www access-list outside_acl remark Intra Https access-list outside_acl extended permit tcp any host MS-ISA-Server-NAT eq https access-list outside_acl remark SSL Server-Https 443 access-list outside_acl remark Https 8443(Open VPN Custom port for SSLVPN client downlaod) access-list outside_acl remark FTP 20 access-list outside_acl remark Http access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT object-group DM_INLINE_TCP_1 access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT eq 8443 access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT eq www access-list outside_acl remark For secure remote Managment-SSH access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT eq ssh access-list outside_acl extended permit ip Genimage_Anyconnect 255.255.255.0 ASA_LAN 255.255.248.0 access-list ASP-Live remark Live ASP access-list ASP-Live extended permit ip ASA_LAN 255.255.248.0 192.168.60.0 255.255.255.0 access-list Bo remark Bo access-list Bo extended permit ip ASA_LAN 255.255.248.0 192.168.169.0 255.255.255.0 access-list Bill remark Bill access-list Bill extended permit ip ASA_LAN 255.255.248.0 Bill.15 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 Bill.5 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.149.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.160.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.165.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.144.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.140.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.152.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.153.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.163.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.157.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.167.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.156.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 North-Office-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.161.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.143.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.137.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.159.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.169.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.150.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.162.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.166.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.168.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.174.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.127.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.173.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.175.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.176.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.100.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.99.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 10.10.10.0 255.255.255.0 access-list no-nat extended permit ip host 192.168.240.34 Cisco-admin-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 Genimage_Anyconnect 255.255.255.0 access-list no-nat extended permit ip host Tunnel-DC host HQ-SDSL-Peer access-list no-nat extended permit ip HQ-LAN 255.255.255.0 North-Office-LAN 255.255.255.0 access-list no-nat extended permit ip North-Office-LAN 255.255.255.0 HQ-LAN 255.255.255.0 access-list Car remark Car access-list Car extended permit ip ASA_LAN 255.255.248.0 192.168.165.0 255.255.255.0 access-list Che remark Che access-list Che extended permit ip ASA_LAN 255.255.248.0 192.168.144.0 255.255.255.0 access-list Chi remark Chi access-list Chi extended permit ip ASA_LAN 255.255.248.0 192.168.140.0 255.255.255.0 access-list Cla remark Cla access-list Cla extended permit ip ASA_LAN 255.255.248.0 192.168.152.0 255.255.255.0 access-list Eas remark Eas access-list Eas extended permit ip ASA_LAN 255.255.248.0 192.168.149.0 255.255.255.0 access-list Ess remark Ess access-list Ess extended permit ip ASA_LAN 255.255.248.0 192.168.153.0 255.255.255.0 access-list Gat remark Gat access-list Gat extended permit ip ASA_LAN 255.255.248.0 192.168.163.0 255.255.255.0 access-list Hud remark Hud access-list Hud extended permit ip ASA_LAN 255.255.248.0 192.168.157.0 255.255.255.0 access-list Ilk remark Ilk access-list Ilk extended permit ip ASA_LAN 255.255.248.0 192.168.167.0 255.255.255.0 access-list Ken remark Ken access-list Ken extended permit ip ASA_LAN 255.255.248.0 192.168.156.0 255.255.255.0 access-list North-Office remark North-Office access-list North-Office extended permit ip ASA_LAN 255.255.248.0 North-Office-LAN 255.255.255.0 access-list inside_acl remark Inside_ad access-list inside_acl extended permit ip any any access-list Old_HQ remark Old_HQ access-list Old_HQ extended permit ip ASA_LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list Old_HQ extended permit ip HQ-LAN 255.255.255.0 192.168.99.0 255.255.255.0 access-list She remark She access-list She extended permit ip ASA_LAN 255.255.248.0 192.168.150.0 255.255.255.0 access-list Lit remark Lit access-list Lit extended permit ip ASA_LAN 255.255.248.0 192.168.143.0 255.255.255.0 access-list Mid remark Mid access-list Mid extended permit ip ASA_LAN 255.255.248.0 192.168.137.0 255.255.255.0 access-list Spi remark Spi access-list Spi extended permit ip ASA_LAN 255.255.248.0 192.168.162.0 255.255.255.0 access-list Tor remark Tor access-list Tor extended permit ip ASA_LAN 255.255.248.0 192.168.166.0 255.255.255.0 access-list Tra remark Tra access-list Tra extended permit ip ASA_LAN 255.255.248.0 192.168.168.0 255.255.255.0 access-list Tru remark Tru access-list Tru extended permit ip ASA_LAN 255.255.248.0 192.168.174.0 255.255.255.0 access-list Yo remark Yo access-list Yo extended permit ip ASA_LAN 255.255.248.0 192.168.127.0 255.255.255.0 access-list Nor remark Nor access-list Nor extended permit ip ASA_LAN 255.255.248.0 192.168.159.0 255.255.255.0 access-list Nor extended permit ip ASA_LAN 255.255.248.0 192.168.173.0 255.255.255.0 inactive access-list ST remark ST access-list ST extended permit ip ASA_LAN 255.255.248.0 192.168.175.0 255.255.255.0 access-list Le remark Le access-list Le extended permit ip ASA_LAN 255.255.248.0 192.168.161.0 255.255.255.0 access-list DMZ-ACL remark DMZ access-list DMZ-ACL extended permit ip host OpenVPN-Srvr any access-list no-nat-dmz remark DMZ -No Nat access-list no-nat-dmz extended permit ip 192.168.250.0 255.255.255.0 HQ-LAN 255.255.255.0 access-list Split_Tunnel_List remark ASA-LAN access-list Split_Tunnel_List standard permit ASA_LAN 255.255.248.0 access-list Split_Tunnel_List standard permit Genimage_Anyconnect 255.255.255.0 access-list outside_cryptomap_30 remark Po access-list outside_cryptomap_30 extended permit ip ASA_LAN 255.255.248.0 Po 255.255.255.0 access-list outside_cryptomap_24 extended permit ip ASA_LAN 255.255.248.0 192.168.100.0 255.255.255.0 access-list outside_cryptomap_16 extended permit ip ASA_LAN 255.255.248.0 192.168.99.0 255.255.255.0 access-list outside_cryptomap_34 extended permit ip ASA_LAN 255.255.248.0 10.10.10.0 255.255.255.0 access-list outside_31_cryptomap extended permit ip host 192.168.240.34 Cisco-admin-LAN 255.255.255.0 access-list outside_32_cryptomap extended permit ip host Tunnel-DC host HQ-SDSL-Peer access-list Genimage_VPN_Any_connect_pix_client remark Genimage "Any Connect" VPN access-list Genimage_VPN_Any_connect_pix_client standard permit Genimage_Anyconnect 255.255.255.0 access-list Split-Tunnel-ACL standard permit ASA_LAN 255.255.248.0 access-list nonat extended permit ip HQ-LAN 255.255.255.0 192.168.99.0 255.255.255.0 pager lines 24 logging enable logging timestamp logging console notifications logging monitor notifications logging buffered warnings logging asdm informational no logging message 106015 no logging message 313001 no logging message 313008 no logging message 106023 no logging message 710003 no logging message 106100 no logging message 302015 no logging message 302014 no logging message 302013 no logging message 302018 no logging message 302017 no logging message 302016 no logging message 302021 no logging message 302020 flow-export destination inside MS-ISA-Server 2055 flow-export destination outside 192.168.130.126 2055 flow-export template timeout-rate 1 flow-export delay flow-create 15 mtu outside 1500 mtu inside 1500 mtu DMZ 1500 mtu management 1500 ip local pool RAS-VPN 10.0.0.1.1-10.0.0.1.254 mask 255.255.255.255 icmp unreachable rate-limit 1 burst-size 1 icmp permit any unreachable outside icmp permit any echo outside icmp permit any echo-reply outside icmp permit any outside icmp permit any echo inside icmp permit any echo-reply inside icmp permit any echo DMZ icmp permit any echo-reply DMZ asdm image disk0:/asdm-621.bin no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface global (inside) 1 interface nat (inside) 0 access-list no-nat nat (inside) 1 0.0.0.0 0.0.0.0 nat (DMZ) 0 access-list no-nat-dmz static (inside,outside) MS-ISA-Server-NAT MS-ISA-Server netmask 255.255.255.255 static (DMZ,outside) OpenVPN-Srvr-NAT OpenVPN-Srvr netmask 255.255.255.255 static (inside,outside) MS-Exchange_server-NAT MS-Exchange_server netmask 255.255.255.255 access-group outside_acl in interface outside access-group inside_acl in interface inside access-group DMZ-ACL in interface DMZ route outside 0.0.0.0 0.0.0.0 1.1.1.225 1 route inside 10.10.10.0 255.255.255.0 192.168.240.34 1 route outside Genimage_Anyconnect 255.255.255.0 1.1.1.225 1 route inside Open-VPN 255.255.248.0 OpenVPN-Srvr 1 route inside HQledon-Voice-LAN 255.255.255.0 192.168.240.34 1 route outside Bill 255.255.255.0 1.1.1.225 1 route outside Yo 255.255.255.0 1.1.1.225 1 route inside 192.168.129.0 255.255.255.0 192.168.240.34 1 route outside HQ-LAN 255.255.255.0 1.1.1.225 1 route outside Mid 255.255.255.0 1.1.1.225 1 route outside 192.168.140.0 255.255.255.0 1.1.1.225 1 route outside 192.168.143.0 255.255.255.0 1.1.1.225 1 route outside 192.168.144.0 255.255.255.0 1.1.1.225 1 route outside 192.168.149.0 255.255.255.0 1.1.1.225 1 route outside 192.168.152.0 255.255.255.0 1.1.1.225 1 route outside 192.168.153.0 255.255.255.0 1.1.1.225 1 route outside North-Office-LAN 255.255.255.0 1.1.1.225 1 route outside 192.168.156.0 255.255.255.0 1.1.1.225 1 route outside 192.168.157.0 255.255.255.0 1.1.1.225 1 route outside 192.168.159.0 255.255.255.0 1.1.1.225 1 route outside 192.168.160.0 255.255.255.0 1.1.1.225 1 route outside 192.168.161.0 255.255.255.0 1.1.1.225 1 route outside 192.168.162.0 255.255.255.0 1.1.1.225 1 route outside 192.168.163.0 255.255.255.0 1.1.1.225 1 route outside 192.168.165.0 255.255.255.0 1.1.1.225 1 route outside 192.168.166.0 255.255.255.0 1.1.1.225 1 route outside 192.168.167.0 255.255.255.0 1.1.1.225 1 route outside 192.168.168.0 255.255.255.0 1.1.1.225 1 route outside 192.168.173.0 255.255.255.0 1.1.1.225 1 route outside 192.168.174.0 255.255.255.0 1.1.1.225 1 route outside 192.168.175.0 255.255.255.0 1.1.1.225 1 route outside 192.168.99.0 255.255.255.0 1.1.1.225 1 route inside ASA_LAN 255.255.255.0 192.168.240.34 1 route inside 192.168.124.0 255.255.255.0 192.168.240.34 1 route inside 192.168.50.0 255.255.255.0 192.168.240.34 1 route inside 192.168.51.0 255.255.255.128 192.168.240.34 1 route inside 192.168.240.0 255.255.255.224 192.168.240.34 1 route inside 192.168.240.164 255.255.255.224 192.168.240.34 1 route inside 192.168.240.196 255.255.255.224 192.168.240.34 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server vpn protocol radius max-failed-attempts 5 aaa-server vpn (inside) host 192.168.X.2 timeout 60 key a5a53r3t authentication-port 1812 radius-common-pw a5a53r3t aaa authentication ssh console LOCAL aaa authentication http console LOCAL http server enable http 0.0.0.0 0.0.0.0 inside http 1.1.1.2 255.255.255.255 outside http 1.1.1.234 255.255.255.255 outside http 0.0.0.0 0.0.0.0 management http 1.1.100.198 255.255.255.255 outside http 0.0.0.0 0.0.0.0 outside crypto map FW_Outside_map 1 match address Bill crypto map FW_Outside_map 1 set peer x.x.x.121 crypto map FW_Outside_map 1 set transform-set SECURE crypto map FW_Outside_map 2 match address Bo crypto map FW_Outside_map 2 set peer x.x.x.202 crypto map FW_Outside_map 2 set transform-set SECURE crypto map FW_Outside_map 3 match address ASP-Live crypto map FW_Outside_map 3 set peer x.x.x.113 crypto map FW_Outside_map 3 set transform-set SECURE crypto map FW_Outside_map 4 match address Car crypto map FW_Outside_map 4 set peer x.x.x.205 crypto map FW_Outside_map 4 set transform-set SECURE crypto map FW_Outside_map 5 match address Old_HQ crypto map FW_Outside_map 5 set peer x.x.x.2 crypto map FW_Outside_map 5 set transform-set SECURE WG crypto map FW_Outside_map 6 match address Che crypto map FW_Outside_map 6 set peer x.x.x.204 crypto map FW_Outside_map 6 set transform-set SECURE crypto map FW_Outside_map 7 match address Chi crypto map FW_Outside_map 7 set peer x.x.x.212 crypto map FW_Outside_map 7 set transform-set SECURE crypto map FW_Outside_map 8 match address Cla crypto map FW_Outside_map 8 set peer x.x.x.215 crypto map FW_Outside_map 8 set transform-set SECURE crypto map FW_Outside_map 9 match address Eas crypto map FW_Outside_map 9 set peer x.x.x.247 crypto map FW_Outside_map 9 set transform-set SECURE crypto map FW_Outside_map 10 match address Ess crypto map FW_Outside_map 10 set peer x.x.x.170 crypto map FW_Outside_map 10 set transform-set SECURE crypto map FW_Outside_map 11 match address Hud crypto map FW_Outside_map 11 set peer x.x.x.8 crypto map FW_Outside_map 11 set transform-set SECURE crypto map FW_Outside_map 12 match address Gat crypto map FW_Outside_map 12 set peer x.x.x.212 crypto map FW_Outside_map 12 set transform-set SECURE crypto map FW_Outside_map 13 match address Ken crypto map FW_Outside_map 13 set peer x.x.x.230 crypto map FW_Outside_map 13 set transform-set SECURE crypto map FW_Outside_map 14 match address She crypto map FW_Outside_map 14 set peer x.x.x.24 crypto map FW_Outside_map 14 set transform-set SECURE crypto map FW_Outside_map 15 match address North-Office crypto map FW_Outside_map 15 set peer x.x.x.94 crypto map FW_Outside_map 15 set transform-set SECURE crypto map FW_Outside_map 16 match address outside_cryptomap_16 crypto map FW_Outside_map 16 set peer x.x.x.134 crypto map FW_Outside_map 16 set transform-set SECURE crypto map FW_Outside_map 16 set security-association lifetime seconds crypto map FW_Outside_map 17 match address Lit crypto map FW_Outside_map 17 set peer x.x.x.110 crypto map FW_Outside_map 17 set transform-set SECURE crypto map FW_Outside_map 18 match address Mid crypto map FW_Outside_map 18 set peer 78.x.x.110 crypto map FW_Outside_map 18 set transform-set SECURE crypto map FW_Outside_map 19 match address Sp crypto map FW_Outside_map 19 set peer x.x.x.47 crypto map FW_Outside_map 19 set transform-set SECURE crypto map FW_Outside_map 20 match address Tor crypto map FW_Outside_map 20 set peer x.x.x.184 crypto map FW_Outside_map 20 set transform-set SECURE crypto map FW_Outside_map 21 match address Tr crypto map FW_Outside_map 21 set peer x.x.x.75 crypto map FW_Outside_map 21 set transform-set SECURE crypto map FW_Outside_map 22 match address Yo crypto map FW_Outside_map 22 set peer x.x.x.40 crypto map FW_Outside_map 22 set transform-set SECURE crypto map FW_Outside_map 23 match address Tra crypto map FW_Outside_map 23 set peer x.x.x.145 crypto map FW_Outside_map 23 set transform-set SECURE crypto map FW_Outside_map 24 match address outside_cryptomap_24 crypto map FW_Outside_map 24 set peer x.x.x.46 crypto map FW_Outside_map 24 set transform-set SECURE crypto map FW_Outside_map 24 set security-association lifetime seconds crypto map FW_Outside_map 25 match address Nor crypto map FW_Outside_map 25 set peer x.x.x.70 crypto map FW_Outside_map 25 set transform-set SECURE crypto map FW_Outside_map 26 match address Ilk crypto map FW_Outside_map 26 set peer x.x.x.65 crypto map FW_Outside_map 26 set transform-set SECURE crypto map FW_Outside_map 27 match address Nor crypto map FW_Outside_map 27 set peer x.x.x.240 crypto map FW_Outside_map 27 set transform-set SECURE crypto map FW_Outside_map 28 match address ST crypto map FW_Outside_map 28 set peer x.x.x.163 crypto map FW_Outside_map 28 set transform-set SECURE crypto map FW_Outside_map 28 set security-association lifetime seconds crypto map FW_Outside_map 28 set security-association lifetime kilobytes crypto map FW_Outside_map 29 match address Lei crypto map FW_Outside_map 29 set peer x.x.x.4 crypto map FW_Outside_map 29 set transform-set SECURE crypto map FW_Outside_map 30 match address outside_cryptomap_30 crypto map FW_Outside_map 30 set peer x.x.x.34 crypto map FW_Outside_map 30 set transform-set SECURE crypto map FW_Outside_map 31 match address outside_31_cryptomap crypto map FW_Outside_map 31 set pfs crypto map FW_Outside_map 31 set peer Cisco-admin-Peer crypto map FW_Outside_map 31 set transform-set ESP-AES-256-SHA crypto map FW_Outside_map 32 match address outside_32_cryptomap crypto map FW_Outside_map 32 set pfs crypto map FW_Outside_map 32 set peer HQ-SDSL-Peer crypto map FW_Outside_map 32 set transform-set ESP-AES-256-SHA crypto map FW_Outside_map 34 match address outside_cryptomap_34 crypto map FW_Outside_map 34 set peer x.x.x.246 crypto map FW_Outside_map 34 set transform-set ESP-AES-128-SHA ESP-AES-192-SHA ESP-AES-256-SHA crypto map FW_Outside_map 65535 ipsec-isakmp dynamic dynmap crypto map FW_Outside_map interface outside crypto map FW_outside_map 31 set peer x.x.x.45 crypto isakmp identity address crypto isakmp enable outside crypto isakmp policy 9 webvpn enable outside svc enable group-policy ASA-LAN-VPN internal group-policy ASA_LAN-VPN attributes wins-server value 192.168.x.1 192.168.x.2 dns-server value 192.168.x.1 192.168.x.2 vpn-tunnel-protocol IPSec svc split-tunnel-policy tunnelspecified split-tunnel-network-list value Split-Tunnel-ACL default-domain value MYdomain username xxxxxxxxxx password privilege 15 tunnel-group DefaultRAGroup ipsec-attributes isakmp keepalive threshold 30 retry 2 tunnel-group DefaultWEBVPNGroup ipsec-attributes isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.121 type ipsec-l2l tunnel-group x.x.x..121 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.202 type ipsec-l2l tunnel-group x.x.x.202 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.113 type ipsec-l2l tunnel-group x.x.x.113 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.205 type ipsec-l2l tunnel-group x.x.x.205 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.204 type ipsec-l2l tunnel-group x.x.x.204 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.212 type ipsec-l2l tunnel-group x.x.x.212 ipsec-attributes pre-shared-key * tunnel-group x.x.x.215 type ipsec-l2l tunnel-group x.x.x.215 ipsec-attributes pre-shared-key * tunnel-group x.x.x.247 type ipsec-l2l tunnel-group x.x.x.247 ipsec-attributes pre-shared-key * tunnel-group x.x.x.170 type ipsec-l2l tunnel-group x.x.x.170 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x..8 type ipsec-l2l tunnel-group x.x.x.8 ipsec-attributes pre-shared-key * tunnel-group x.x.x.212 type ipsec-l2l tunnel-group x.x.x.212 ipsec-attributes pre-shared-key * tunnel-group x.x.x.230 type ipsec-l2l tunnel-group x.x.x.230 ipsec-attributes pre-shared-key * tunnel-group x.x.x.24 type ipsec-l2l tunnel-group x.x.x.24 ipsec-attributes pre-shared-key * tunnel-group x.x.x.46 type ipsec-l2l tunnel-group x.x.x.46 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.4 type ipsec-l2l tunnel-group x.x.x.4 ipsec-attributes pre-shared-key * tunnel-group x.x.x.110 type ipsec-l2l tunnel-group x.x.x.110 ipsec-attributes pre-shared-key * tunnel-group 78.x.x.110 type ipsec-l2l tunnel-group 78.x.x.110 ipsec-attributes pre-shared-key * tunnel-group x.x.x.47 type ipsec-l2l tunnel-group x.x.x.47 ipsec-attributes pre-shared-key * tunnel-group x.x.x.34 type ipsec-l2l tunnel-group x.x.x.34 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x..129 type ipsec-l2l tunnel-group x.x.x.129 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.94 type ipsec-l2l tunnel-group x.x.x.94 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.40 type ipsec-l2l tunnel-group x.x.x.40 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.65 type ipsec-l2l tunnel-group x.x.x.65 ipsec-attributes pre-shared-key * tunnel-group x.x.x.70 type ipsec-l2l tunnel-group x.x.x.70 ipsec-attributes pre-shared-key * tunnel-group x.x.x.134 type ipsec-l2l tunnel-group x.x.x.134 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.163 type ipsec-l2l tunnel-group x.x.x.163 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.2 type ipsec-l2l tunnel-group x.x.x.2 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group ASA-LAN-VPN type remote-access tunnel-group ASA-LAN-VPN general-attributes address-pool RAS-VPN authentication-server-group vpn authentication-server-group (outside) vpn default-group-policy ASA-LAN-VPN tunnel-group ASA-LAN-VPN ipsec-attributes pre-shared-key * tunnel-group x.x.x.184 type ipsec-l2l tunnel-group x.x.x.184 ipsec-attributes pre-shared-key * tunnel-group x.x.x.145 type ipsec-l2l tunnel-group x.x.x.145 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.75 type ipsec-l2l tunnel-group x.x.x.75 ipsec-attributes pre-shared-key * tunnel-group x.x.x.246 type ipsec-l2l tunnel-group x.x.x.246 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.2 type ipsec-l2l tunnel-group x.x.x..2 ipsec-attributes pre-shared-key * tunnel-group x.x.x.98 type ipsec-l2l tunnel-group x.x.x.98 ipsec-attributes pre-shared-key * ! ! ! policy-map global_policy description Netflow class class-default flow-export event-type all destination MS-ISA-Server policy-map type inspect dns migrated_dns_map_1 parameters message-length maximum 512 Anyone have a clue because Im on the verge of going postal.....

  Read the article

• pfsense peer-to-peer OpenVPN not connecting

  - by John P

  I'm trying to setup a peer-to-peer OpenVPN between two pfsense servers running 2.0.1-RELEASE, but the client keeps getting the connection dropped, with a status of "reconnecting; ping-restart" and nothing appears to be routing between them. Both these firewalls are also doing PPTP VPNs that are working correctly. FW01 ("server") ======================= LAN: 10.1.1.2/24 WAN: xx.xx.126.34/27 ServerMode: Peer to Peer (Shared Key) Protocol: UDP DeviceMode: tun Interface: WAN Port 1194 Tunnel: 10.0.8.1/30 Local Network: 10.1.1.0/24 Remote Network: 192.168.1.0/24 Firewall Rule in OpenVPN tab: UDP * * * * * none FW03 (client) LAN: 192.168.1.2/24 WAN: xx.xx.9.66/27 ServerMode: Peer to Peer (Shared Key) Protocol: UDP DeviceMode: tun Interface: WAN Server Host: xx.xx.126.34 Tunnel: -- also tried 10.1.8.0/24 Remote Network: 10.1.1.0/24 Client Logs: System Log Apr 6 18:00:08 kernel: ... Restarting packages. Apr 6 18:00:13 check_reload_status: Starting packages Apr 6 18:00:19 php: : Restarting/Starting all packages. Apr 6 18:00:56 kernel: ovpnc1: link state changed to DOWN Apr 6 18:00:56 check_reload_status: Reloading filter Apr 6 18:00:57 check_reload_status: Reloading filter Apr 6 18:00:57 kernel: ovpnc1: link state changed to UP Apr 6 18:00:57 check_reload_status: rc.newwanip starting ovpnc1 Apr 6 18:00:57 check_reload_status: Syncing firewall Apr 6 18:01:02 php: : rc.newwanip: Informational is starting ovpnc1. Apr 6 18:01:02 php: : rc.newwanip: on (IP address: ) (interface: ) (real interface: ovpnc1). Apr 6 18:01:02 php: : rc.newwanip: Failed to update IP, restarting... Apr 6 18:01:02 php: : send_event: sent interface reconfigure got ERROR: incomplete command. all reload reconfigure restart newip linkup sync Client OpenVPN log Apr 6 18:39:14 openvpn[12177]: Inactivity timeout (--ping-restart), restarting Apr 6 18:39:14 openvpn[12177]: SIGUSR1[soft,ping-restart] received, process restarting Apr 6 18:39:16 openvpn[12177]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Apr 6 18:39:16 openvpn[12177]: Re-using pre-shared static key Apr 6 18:39:16 openvpn[12177]: Preserving previous TUN/TAP instance: ovpnc1 Apr 6 18:39:16 openvpn[12177]: UDPv4 link local (bound): [AF_INET]64.94.9.66 Apr 6 18:39:16 openvpn[12177]: UDPv4 link remote: [AF_INET]64.74.126.34:1194 Server OpenVPN log Apr 6 14:40:36 openvpn[22117]: UDPv4 link remote: [undef] Apr 6 14:40:36 openvpn[22117]: UDPv4 link local (bound): [AF_INET]xx.xx.126.34:1194 Apr 6 14:40:36 openvpn[21006]: /usr/local/sbin/ovpn-linkup ovpns1 1500 1557 10.1.8.1 10.1.8.2 init Apr 6 14:40:36 openvpn[21006]: /sbin/ifconfig ovpns1 10.1.8.1 10.1.8.2 mtu 1500 netmask 255.255.255.255 up Apr 6 14:40:36 openvpn[21006]: do_ifconfig, tt-ipv6=0, tt-did_ifconfig_ipv6_setup=0 Apr 6 14:40:36 openvpn[21006]: TUN/TAP device /dev/tun1 opened Apr 6 14:40:36 openvpn[21006]: Control Channel Authentication: using '/var/etc/openvpn/server1.tls-auth' as a OpenVPN static key file Apr 6 14:40:36 openvpn[21006]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Apr 6 14:40:36 openvpn[21006]: OpenVPN 2.2.0 amd64-portbld-freebsd8.1 [SSL] [LZO2] [eurephia] [MH] [PF_INET6] [IPv6 payload 20110424-2 (2.2RC2)] built on Aug 11 2011 Apr 6 14:40:36 openvpn[17171]: SIGTERM[hard,] received, process exiting Apr 6 14:40:36 openvpn[17171]: /usr/local/sbin/ovpn-linkdown ovpns1 1500 1557 10.1.8.1 10.1.8.2 init Apr 6 14:40:36 openvpn[17171]: ERROR: FreeBSD route delete command failed: external program exited with error status: 1 Apr 6 14:40:36 openvpn[17171]: event_wait : Interrupted system call (code=4) Apr 6 14:06:32 openvpn[17171]: Initialization Sequence Completed Apr 6 14:06:32 openvpn[17171]: UDPv4 link remote: [undef] Apr 6 14:06:32 openvpn[17171]: UDPv4 link local (bound): [AF_INET]xx.xx.126.34:1194

  Read the article

• 3Ware 9650SE RAID-6, two degraded drives, one ECC, rebuild stuck

  - by cswingle

  This morning I came in the office to discover that two of the drives on a RAID-6, 3ware 9650SE controller were marked as degraded and it was rebuilding the array. After getting to about 4%, it got ECC errors on a third drive (this may have happened when I attempted to access the filesystem on this RAID and got I/O errors from the controller). Now I'm in this state: > /c2/u1 show Unit UnitType Status %RCmpl %V/I/M Port Stripe Size(GB) ------------------------------------------------------------------------ u1 RAID-6 REBUILDING 4%(A) - - 64K 7450.5 u1-0 DISK OK - - p5 - 931.312 u1-1 DISK OK - - p2 - 931.312 u1-2 DISK OK - - p1 - 931.312 u1-3 DISK OK - - p4 - 931.312 u1-4 DISK OK - - p11 - 931.312 u1-5 DISK DEGRADED - - p6 - 931.312 u1-6 DISK OK - - p7 - 931.312 u1-7 DISK DEGRADED - - p3 - 931.312 u1-8 DISK WARNING - - p9 - 931.312 u1-9 DISK OK - - p10 - 931.312 u1/v0 Volume - - - - - 7450.5 Examining the SMART data on the three drives in question, the two that are DEGRADED are in good shape (PASSED without any Current_Pending_Sector or Offline_Uncorrectable errors), but the drive listed as WARNING has 24 uncorrectable sectors. And, the "rebuild" has been stuck at 4% for ten hours now. So: How do I get it to start actually rebuilding? This particular controller doesn't appear to support /c2/u1 resume rebuild, and the only rebuild command that appears to be an option is one that wants to know what disk to add (/c2/u1 start rebuild disk=<p:-p...> [ignoreECC] according to the help). I have two hot spares in the server, and I'm happy to engage them, but I don't understand what it would do with that information in the current state it's in. Can I pull out the drive that is demonstrably failing (the WARNING drive), when I have two DEGRADED drives in a RAID-6? It seems to me that the best scenario would be for me to pull the WARNING drive and tell it to use one of my hot spares in the rebuild. But won't I kill the thing by pulling a "good" drive in a RAID-6 with two DEGRADED drives? Finally, I've seen reference in other posts to a bad bug in this controller that causes good drives to be marked as bad and that upgrading the firmware may help. Is flashing the firmware a risky operation given the situation? Is it likely to help or hurt wrt the rebuilding-but-stuck-at-4% RAID? Am I experiencing this bug in action? Advice outside the spiritual would be much appreciated. Thanks.

  Read the article

< Previous Page | 494 495 496 497 498 499 500 501 502 503 504 505  | Next Page >