Search Results

Search found 40998 results on 1640 pages for 'setup project'.

Page 498/1640 | < Previous Page | 494 495 496 497 498 499 500 501 502 503 504 505  | Next Page >

• Why are the external IP of my router not the same as the external IP of my computer

  - by Martin

  I have a standard network setup where all my network devices, both WIFI and ethernet, are connected to the same router. Lately, however, I've been experiencing some very strange behavior. It started as a simple connecting error, when I tried to reach an FTP server using the external IP. Of course I went right into one of those CheckMyIP sites, to double check the IP and it turned out to be correct. Then I went into my router setup, which is through a tool called aiport-tool, because I have an Apple Aiport Extreme router. Turns out the router displays a different external IP, and for some reason that external IP works when I try to access the FTP server. Can anyone explain what is going on? Why are the devices connected to the router displaying an incorrect external IP? BTW i have no VPN/proxy setups on any of my devices.

  Read the article

• Windows 7 with two network cards doesn't route traffic

  - by Tomek

  I have simple task to do: I have wni7 with two nics.I want to connect another comp(osx) to win7 through second nic to connect it to internet. I already changed the registry. Win7 interface with 192.168.2.1 has no gateway set (no point to do that) OSX interface with 192.168.2.2 has gateway set to 192.168.2.1 I do not add any routes on win7, every thing seems to be already there network on second nic is detected as "undefined network" (probably effect of no gateway) i can achieve any connectivity to internet from OSX only by enabling network connection sharing on nic with 192.168.2.1, but it enables NAT and I'm interested only in pure routing without nat(it's a setup for some research). firewall is off. It seems to me that win7 refuses to forward packets for some reason. Perhaps "undefined network" and NLA service is to blame, although i couldn't find any info about that. Below ascii schematics of my setup: internet<--router(192.168.1.1)<--(192.168.1.1) WIN7 (192.168.2.1)<--(192.168.2.2)OSX Thanks

  Read the article

• How effectively "sell" a good design in large meetings

  - by User1

  Many times I have witnessed a sad tragedy. Here's what happens: A team design review for a new project. I see a simple design that has quite a few holes. I casually mention the holes and ways to avoid them. The warnings are ignored with comments like "that 'never' happen in real life" Eventually the things that "will 'never' happen" happen An emergency team design review for a broken project. So what do I do? Copping the "I told you so" attitude is not going to win friends and influence people. Sometimes years go by and the comments from step 3 are forgotten anyway. I definitely don't want to be the annoying pest reminding the world of the gotchas. I often sit back and watch the Titanic sail off to Europe. It's frustrating to see bad designs move forward. It's also frustrating that I can't seem to convince others of the pending peril of the current path. I do worst on team meetings where everyone has different ways of understanding different terms. Also, egos tend to win of reason and thought. I'm looking for good tactics to convince groups people to use some new and complicated ideas.

  Read the article

• Setting up a server with only subdomains, any connection to top level goes to main server on another IP?

  - by Anagio

  I'm developing a web app where users will have their own sub-domain to login to and use the application. I'm running wordpress for the main website to manage the public / front end. Our application is developed in zend framework. The zf project is currently in a subfolder on the main server. I'd like to place the zend framework project onto another server (different IP) and keep it separate from the the wordpress front end www.domain.com site. The zf application server will run nginx. I'm not sure how to setup a server to run strictly sub domains. Setting up the virtual hosts in the configuration file is no problem. To give the users username.domain.com. But what about the main default configuration file? How would that be configured since the top level domain is technically another server (wordpress) on another IP?

  Read the article

• What to do with old hard drives?

  - by caliban

  I have over 100+ old hard drives, ranging from 100MB Quantums to 200GB WDs, most of them PATA, some SATA. Most still working. The squirrel mentality runs in my family - hoard everything, discard nothing. Thus, and this is a relevant question - any suggestions on how to put these drives to use (anything) instead of them just being deadweights and space takers around the office? Hopeful objectives and suggestions to keep in mind when you post an answer : Should showcase your geekiness, or plain fun, or serve a social purpose, or benefit the community. You do not need to limit your answer to only one hard drive - if your project needs all 100++, bring it on! Your answer need not be limited to one project per hard drive - if one hard drive can be used for multiple projects, bring it on! If additional accessories need be purchased, make sure they are common. Don't tell me to get a moon rock or something. The projects you suggested should serve a utility, and not just for decoration purposes.

  Read the article

• Make Outlook run rules on non-inbox folders automatically

  - by tHeSiD

  I currently have my Outlook setup with Gmail. I have a couple of rules that I have defined which run on different folders (lables) in my account. I have filters already setup in GMail which will make emails skip the inbox and put them in the respective folders. Whenever I get a new email, in those folders, my rules are not run (they are just for setting categories). I have to run them manually. I think its because the emails don't come to the inbox first but directly into the folder. Is there anyway to make outlook run rules automatically on those folders? A scheduled run should also be fine.

  Read the article

• Expendable, Redundant, Easily recoverable

  - by MeIr

  I am desperate at this point, I have been looking for "Big storage" solution for a while on my own and I can't find anything that would suite my needs. But now push came to shove. Current situation: I have about 6TB data storage (already full) - Drobo. Yesterday Drobo died on me and it put me into bad situation - I can't recover my data without buying another Drobo. From extensive research online I realized that Drobo is not the safest bet and by now it seems very poor choice. I ordered new Drobo to try to get my data back, however I don't want to be in the same situation later and continuing using Drobo promises this event to re-occur. What I am looking for: 1) Inexpensive setup. 2) Dynamically extendable - add more drives and/or replace a drive with bigger capacity. 3) Redundant - setup against 1-3 drive failure, will depend on total number of drives. For the sake of argument let's assume for every 4 drives one should be able to fail without data loss. 4) Easy data recovery - let's say unforeseen happens, I would like to be able to recover information without buying new tools or replacements - example: new Drobo. 5) Should be USB or Network Attach Storage 6) No demand on speed. Doesn't have to be fast, I am not doing video editing on the setup. However if option exists, would be nice to have a decent speed. After thoughts: I reviewed few options and FreeNAS looks nice, but it doesn't have #2 - Dynamic extendability. There are work around with Pools but it seems a bit complicated and unnecessary. More over it seems like data safety is a big question - saw some horror stories. Please advise on what options I have and what seems like an optimal solution (if any). I don't care if it has to be Windows or Linux box or any other OS and/or software that has to run on top, but simple solution is more attractive. Thank you! P.S: Feel free to ignore "After thoughts".

  Read the article

• Create and manage child name servers (glue records) within my domain?

  - by basilmir

  Preface I use a top level domain provider that only allows me to add "normal" third-party name servers (a list where i can add "ns1.hostingcompany.com" type entries... nothing else) AND "child name servers" which i can later attach to my parent account ( ns1.myowndomain.com and an ip address). They do not provide other means of linking up. I want to host my own server and dns, even with just one name server (at first). My setup: Airport Extreme - get's a static ip address from my ISP Mac Mini Server - sits behind the Airport and get's a 10.0.1.2 My problem is that i can't seem to configure DNS correctly. I added a "child nameserver" with my airport's external static ip address at the top level provider, so to my understanding i should have all DNS traffic redirected to my Airport. I've opened port 53 UDP to let the traffic in. Now, what i don't get is this. My Mini Server is sitting on a 10.0.1.2 address and i have setup dns correctly, with an A record to point and resolve my server AND a reverse lookup to that 10.0.1.2. So it's ok for "internal stuff". Here is the clicker... How, when a request comes from the exterior for a reverse lookup, does the server "know" ... well look i have everything in 10.0.1.2 but the guy outside needs something from my real address. I can't begin to describe the MX record bonanza... How do i set this "right"? Do i "need" my Mini Server to sit on the external address directly (i can see how this could be the preferred solution, being close to a "real" server i have in my mind). If not... do i need a PTR record on the 10.0.1.2 server but with the external address in there? My dream: I will extend this "setup" with multiple Mini's in different cities where i work. I want a distributed something (Xgrid comes to mind). PS. Be gentle, i've read 2 books and the subject, and bought both the Lynda Essentials and DNS and Networking to boot, still i'm far from being on top of things.

  Read the article

• Win7 XP mode install fails with cryptic error

  - by MAW74656

  Trying to install XPmode on Win7 Professional 64-bit SP1, but getting an error. I downloaded XPMode, Virtual PC and the update as specified here: http://www.microsoft.com/windows/virtual-pc/download.aspx. When I open XP mode for the first time it goes into the setup ("Setting up Windows XP Mode for first use..."; pick your VM password, etc.), then it runs through the progress bar until almost the end (99%?). At that point I get the error: Could not complete Setup. Please try again. Whats going on here? I've uninstalled Virtual PC and xpmode, and reinstalled in several different orders, no luck. Is there some log file that will tell me whats happening? Theres nothing showing up in the Event log that I can find. How can I fix this?

  Read the article

• Use Windows 7 offline sync with external usb hd

  - by René

  Yeah, truly the whole question in the header. Is there a way to use Windows 7 offline sync (which we know from network mapped drives) with a external usb hd? When not, are there similar built in tools or good third party tools? My scenario: I want to buy a ultrabook with SSD which is mostly limited in space. So I'm going to put all files to a external HD and only store current projects on the local SSD. Let's say I have to change project. It would be easy just change sync folders and have the second project synced to my hd too. With network mapped drives it's such easy. Paths do not differ if the drive is offline so in most situations you don't take notice if the folder is offline. And you only have to activate offline file for the folders you courrently need for work. So is there a similar solution for usb hard drives?

  Read the article

• MS-Outlook add-on to move a new message to the same folder as the rest of the thread

  - by Guss

  I'm forced to use MS-Outlook in my job, while I very much like the feature that shows all the messages of a discussion thread (that are stored in different folders) in the inbox when a new message is received for that thread, if the previous messages are in a different data file (which I'm forced to have as the MS-Exchange server quota is very very small) then the message list only shows the name of the data file and not the name of the folder where the messages are stored. As a result, because I file my message by context (i.e. all the emails for project A go into a "Project A" folder, etc), and its important for me to have all the messages in a single thread in the same folder, it is sometimes hard to figure out into which folder should I file the new message. It would be great help if there was some add-on or VBA script that I could add to my setup that will offer a shortcut key or a button to "file this message to the same folder as the previous messages in the conversation thread".

  Read the article

• Cannot use `su` or `sudo` after set up key-based access to SSH

  - by OrangeTux

  I'm following this tuturial to setup key-based access to the SSH I created a user. I add copy the key to the client via ssh-copy-id <username>@<host> Becasuse ssh <username>@<host> still prompts for a password I run ssh-add on the local machine. The terminal doens't prompt for a password, I can login without using a password. But I cannot run su anymore. Every input for the password results in Authentication failure. I tried it again. But before coping the key, I added to the sudoer file. Copied key, ssh-add. But now I cannot login to my SSH shell att all? How can I setup a key-based SSH access with the possibiluty to use su or sudo?

  Read the article

• Load balancers, multiple data centers and url based routing

  - by kunkunur

  There is one data center - dc1. There is a business need to setup another data center - dc2 in another geography and there might be more in the future say dc3. Within the data center dc1: There are two web servers say WS1 and WS2. These two webservers do not share anything currently. There isnt any necessity foreseen to have more webservers within each dc. dc1 also has a local load balancer which has been setup with session stickiness. So if a user say u1 lands on dc1 and if the load balancer decides to route his first request to WS1 then from there on all u1's requests will get routed to WS1. Local load balancer and webservers are invisible to the user. Local load balancer listens to the traffic on a virtual ip which is assigned to the virtual cluster of webservers ws1 and ws2. Virtual ip is the ip to which the host name is resolved to in the DNS. There are no client specific subdomains as of now instead there is a client specific url(context). ex: www.example.com/client1 and www.example.com/client2. Given above when dc2 is onboarded I want to route the traffic between dc1 and dc2 based on the client. The options that I have found so far are. Have client specific subdomains e.g. client1.example.com and client2.example.com and assign each of them with the virtual ip of the data center to which I want to route them. or Assign www.example.com and www1.example.com to first dc i.e. dc1 and assign www2.example.com to dc2. All requests will first get routed to dc1 where WS1 and WS2 will redirect the user to www1.example.com or www2.example.com based on whether the url ends with /client1 or /client2. I need help in the following If I setup a global load balancer between dc1 and dc2 do I have any alternative solutions. That is, can a global load balancer route the traffic based on the url ? Are there drawbacks to subdomain based solutions compared to www1 solution? With www1 solution I am worried that it creates a dependency on dc1 atleast for the first request and the user will see that he is getting redirected to a different url.

  Read the article

• Dialogs appear on wrong monitor with SQL Server Management Studio 2008

  - by David

  I am running SSMS 2008 on Windows 7 with a dual monitor setup (one large, one small). SSMS is running on the secondary monitor, but everytime a dialog is opened, the dialog is placed on the primary monitor instead. I've tried moving the dialog over, closing it, and then re-opening it, but it doesn't remember and goes back to the primary monitor. This is really annoying for some of the designer dialogs, is there any way to fix this other than switching SSMS to the primary monitor? Is this a known bug with SSMS, or is it a problem with my particular setup?

  Read the article

• Running a home mail server using dynamic dns

  - by user4009

  Hi, Is it possible to run an email server on my home box using dynamic dns? The scenario is, I want to auto cc all incoming and outgoing emails from my one account to another, from some server side config instead of configuring email clients for rules. I have tried Google Apps Mail but it doesn't allow auto cc of outgoing emails. After having read tons of blogs, forum messages etc (hope I have been reading the correct info :) ) the only option to achieve what I am needing is to setup my own mail server, but the cost of getting a static IP doesn't fit my budget. Please can someone point me in the correct direction. Platform doesn't matter, I can setup a Windows or Linux server. Many Thanks

  Read the article

• Debian Squeeze can't install php-pear

  - by Lennier

  I use Debian 6.0.6 sudo apt-get install php-pear results in: Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: initscripts : Breaks: console-setup (< 1.74) but 1.68+squeeze2 is to be installed Breaks: initramfs-tools (< 0.104) but 0.98.8 is to be installed Breaks: nfs-common (< 1:1.2.5-3) but 1:1.2.2-4squeeze2 is to be installed keyboard-configuration : Breaks: console-setup (< 1.71) but 1.68+squeeze2 is to be installed klibc-utils : Breaks: initramfs-tools (< 0.103) but 0.98.8 is to be installed E: Broken packages How can i solve it?

  Read the article

• How can I set Qmail to relay all mail to one address

  - by MoSiAc

  I'm new to qmail it's setup and working like it should. I need to set it to do something a bit different. I need it to take all mail that would be incoming to it and relay all of that to one address as opposed to whatever address they could have possibly set it to. The idea is we have setup a test enviroment and we want no e-mails from a test server to actually go out to real people so this relay server will catch all of that outgoing mail and throw it into a test e-mail account inbox to check for errors and so forth. I'm honestly not sure if this is even possible so if it's not let me know now so I can come up with a different method to manage all these test e-mails. Thanks

  Read the article

• Does nginx auth_basic work over HTTPS?

  - by monde_

  I've been trying to setup a password protected directory in a SSL website as follows: /etc/nginx/sites-available/default server { listen 443: ssl on; ssl_certificate /usr/certs/server.crt; ssl_certificate_key /usr/certs/server.key; server_name server1.example.com; root /var/www/example.com/htdocs/; index index.html; location /secure/ { auth_basic "Restricted"; auth_basic_user_file /var/www/example.com/.htpasswd; } } The problem is when I try to access the URL https://server1.example.com/secure/, I get a "404: Not Found" error page. My error.log shows the following error: 011/11/26 03:09:06 [error] 10913#0: *1 no user/password was provided for basic authentication, client: 192.168.0.24, server: server1.example.com, request: "GET /secure/ HTTP/1.1", host: "server1.example.com" However, I was able to setup password protected directories for a normal HTTP virtual host without any problems. Is it a problem with the config or something else?

  Read the article

• cakephp & nginx config/rewrite rules

  - by seanl

  Hi somebody please help me out, I've asked this at stackoverflow as well but not got much of a response and was debating whether it was programming or server related. I’m trying to setup a cakephp environment on a Centos server running Nginx with Fact CGI. I already have a wordpress site running on the server and a phpmyadmin site so I have PHP configured correctly. My problem is that I cannot get the rewrite rules setup correct in my vhost so that cake renders pages correctly i.e. with styling and so on. I’ve googled as much as possible and the main consensus from the sites like the one listed below is that I need to have the following rewrite rule in place location / { root /var/www/sites/somedomain.com/current; index index.php index.html; # If the file exists as a static file serve it # directly without running all # the other rewrite tests on it if (-f $request_filename) { break; } if (!-f $request_filename) { rewrite ^/(.+)$ /index.php?url=$1 last; break; } } http://blog.getintheloop.eu/2008/4/17/nginx-engine-x-rewrite-rules-for-cakephp problem is these rewrite assume you run cake directly out of the webroot which is not what I want to do. I have a standard setup for each site i.e. one folder per site containing the following folders log, backup, private and public. Public being where nginx is looking for its files to serve but I have cake installed in private with a symlink in public linking back to /private/cake/ this is my vhost server { listen 80; server_name app.domain.com; access_log /home/public_html/app.domain.com/log/access.log; error_log /home/public_html/app.domain.com/log/error.log; #configure Cake app to run in a sub-directory #Cake install is not in root, but elsewhere and configured #in APP/webroot/index.php** location /home/public_html/app.domain.com/private/cake { index index.php; if (!-e $request_filename) { rewrite ^/(.+)$ /home/public_html/app.domain.com/private/cake/$1 last; break; } } location /home/public_html/app.domain.com/private/cake/ { index index.php; if (!-e $request_filename) { rewrite ^/(.+)$ /home/public_html/app.domain.com/public/index.php?url=$1 last; break; } } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /home/public_html/app.domain.com/private/cake$fastcgi_script_name; include /etc/nginx/fastcgi_params; } } Now like I said I can see the main index.php of cake and have connected it to my DB but this page is without styling so before I proceed any further I would like to configure it correctly. What am I doing wrong………. Thanks seanl

  Read the article

• Building an intranet

  - by WernerCD

  I'm researching for a project I'm going to be doing at work on the side... I work for a small hospital and we recently upgraded all the browsers inside our intranet to IE8 (Goodbye 6 :). We have a small, obsolete intranet built by someone who isn't a web designer... functional enough, but annoying to maintain and really sparse. What I'm wanting to do... is use a good framework. I'm looking for suggestions... I'm looking for something Windows IIS based. I'd love windows authentication - with the ability to delegate sub-sections of the website to managers. Right now it's my job to add/update/delete anything from the site... I'd like something not complicated that can be delegated to non-technical people. Like... the Cafeteria Manager should be able to update the menu without putting a ticket into me. She'd log into her computer, open the intranet (which would use her windows log-on to identify her) and have elevated privileges to edit her section of the intranet. If I have to "extend" a good framework to get Windows Authentication, I'll do it... but I'd prefer it to be baked in. What are some good frameworks, tools and places to start? While this isn't a "Huge" project... it's going to be bigger than the basic stuff I've done before and I'd like a good place to start.

  Read the article

• Detaching EBS Volumes (in LVM) take a lot of time

  - by Cheezo

  I have an EC2 Instance(EBS Backed-root partition) with EBS volumes configured via LVM. I have formatted it as ext4 and can mount it to store data etc. Now i want take a snapshot of the root partition, hence in that case i go and detach the other non-root EBS volumes (configured in LVM). Here a regular detach does not work, and i have "force" detach almost always. Although, i another similar setup with RAID instead of LVM and there after stopping RAID, i can easily detach. The whole setup is running Ubuntu Maverick 10.10 Please assist me in the same.

  Read the article

• Quitting a small start-up where you are a primary developer?

  - by programmx10

  Just curious to hear from other people who may have been in similar situations. I work for a small startup (very small) where I am the main developer for a major part of the app they are building, the other dev they have does a different area of work than I do so couldn't take over my part. I've been with the company 5 months, or so, but I am looking at going to a more stable company soon because its just getting to be too much stress, overtime, pressure, etc for too little benefit and I miss working with other developers who can help out on a project. The guy is happy with my work and I think I've helped them get pretty far but I've realized I just don't like being this much "on the edge" as its hard to tell what the direction of the company is going to be since its so new. Also, even though I'm the main dev for the project, I would still only consider myself a mid-level dev and am selling myself as such for the new job search. Just to add more detail, I'm not a partner or anything in the company and this was never discussed, so I just work on a W2 (with no benefits of course). I work at home so that makes it easier to leave, I guess, but I don't want to just screw the guy over but also don't want to be tied in for too long. Obviously I would plan to give 2 weeks notice at least, but should I give more? How should I bring up the subject because I know its going to be a touchy thing to bring up. Any advice is appreciated UPDATE: Thanks everyone for posting on this, I have now just completed the process of accepting an offer with a larger company and quitting the startup. I have given 2 weeks notice and have offered to make myself available after that if needed, basically its a really small company at this point so it would only be 1 dev that I would have to deal with... anyways, it looks like it may work out well as far as me maintaining a good relationship with the founder for future work together, I made it out to be more of a personal / lifestyle issue than about their flaws / shortcomings which definitely seems to help in leaving on a good note

  Read the article

• Are there any good resources for refactoring existing C# code to use LINQ while keeping your tests passing?

  - by Paddyslacker

  I've been teaching myself a little LINQ and an exercise I thought would be useful was to take my existing Project Euler C# code, which I built using Test Driven Development and gradually convert it to LINQ. I realise that LINQ is not always the best solution for all of the Project Euler problems, but I don't want to get into that here. I'm wondering whether or not it's feasible to refactor "traditional" OO C# code to use LINQ and functional programming syntax whilst keeping all of your tests passing. I can't find a way to make the tiny steps I'm used to making using TDD when converting to LINQ and this is a roadblock for me. I seem to have to make large changes to come up with a single function that I then replace whole chunks of my code with. I realise I could write this from scratch in LINQ, but in the real world, I'd like to be able to replace parts of my existing C# code to take advantage of LINQ where appropriate. Has anyone been successful with this approach? What resources did you find useful for refactoring existing C# code to use LINQ whilst taking a Test Driven Development approach?

  Read the article

• Proxying/Tunneling IPSec traffic via netcat or SOCKS?

  - by MattC

  I have a client that is using a SonicWall router as their VPN concentrator. I downloaded the client software and set up the router as a peer. My issue is that my company uses a dual DMZ setup, meaning we have an interior firewall, then a bunch of DMZ servers, then an external firewall, then finally the telco router. In this setup, the interior firewall has no way to communicate with the exterior firewall since they are on two totally separate subnets. The communication occurs through the servers that straddle the networks. In this case, I need some way to forward the ISAKMP/IPSec traffic from my desktop out to the Internet. My usual trick of using netcat on the intermediate proxy server doesn't work here since it's not TCP/UDP traffic as far as I can tell. All of my previous experience with VPN's have been using SSL-based VPN's which are clearly very easily proxy-able. Any help would be appreciated, thanks!

  Read the article

• Can't get sync with SVN to work to put a directory under version control

  - by Chamster

  I've created a directory on our SVN server and added a local directory with my project to it. It got uploaded and seems to be OK. However, I didn't get those cute green (or any others) icons on the file. So I clicked on the project's directory and used "checkout". That wasn't good because I've downloaded ALL of the repository. How can I synchronize my uploaded directory with it's corresponding directory on the server? (It's probably something easy that I've forgot to check in or so...)

  Read the article

< Previous Page | 494 495 496 497 498 499 500 501 502 503 504 505  | Next Page >