subsonic active record - Page 499

Simplifying Human Capital Management with Mobile Applications

- by HCM-Oracle

By Aaron Green If you're starting to think 'mobility' is a recurring theme in your reading, you'd be right. For those who haven't started to build organisational capabilities to leverage it, it's fair to say you're late to the party. The good news: better late than never. Research firm eMarketer says the worldwide smartphone audience will total 1.75 billion this year, while communications technology and services provider Ericsson suggests smartphones will triple to 5.6 billion globally by 2019. It should be no surprise, smart phone adoption is reaching the farthest corners of the globe; the subsequent impact of enterprise applications enabled by these devices is driving business performance improvement and will continue to do so. Companies using advanced workforce analytics can add significantly to the bottom line, while impacting customer satisfaction, quality and productivity. It's a statement that makes most business leaders sit forward in their chairs. Achieving these three standards is like sipping The Golden Elixir for the business world. No-one would argue their importance. So what are 'advanced workforce analytics?' Simply, they're unprecedented access to workforce trends and performance markers. Many are made possible by a mobile world and the enterprise applications that come with it on smart devices. Some refer to it as 'the consumerisation of IT'. As this phenomenon has matured and become more widely appreciated it has impacted the spectrum of functional units within an enterprise differently, but powerfully. Whether it's sales, HR, marketing, IT, or operations, all have benefited from a more mobile approach. It has been the catalyst for improvement in, and management of, the employee experience. The net result of which is happier customers. The obvious benefits but the lesser realised impact Most people understand that mobility allows for greater efficiency and productivity, collaboration and flexibility, but how that translates into business outcomes within the various functional groups is lesser known. In actuality mobility has helped galvanise partnerships between cross-functional groups within the enterprise. Where in some quarters it was once feared mobility could fragment a workforce, its rallying cry of support is coming from what you might describe as an unlikely source - HR. As the bedrock of an enterprise, it is conceivable HR might contemplate the possible negative impact of a mobile workforce that no-longer sits in an office, at the same desks every day. After all, who would know what they were doing or saying? How would they collaborate? It's reasonable to see why HR might have a legitimate claim to try and retain as much 'perceived control' as possible. The reality however is mobility has emancipated human capital and its management. Mobility and enterprise applications are expediting decision making. Google calls it Zero Moment of Truth, or ZMOT. It enables smoother operation and can contribute to faster growth. From a collaborative perspective, with the growing use of enterprise social media, which in many cases is being driven by HR, workforce planning and the tangible impact of change is much easier to map. This in turn provides a platform from which individuals and teams can thrive. With more agility and ability to anticipate, staff satisfaction and retention is higher, and real time feedback constant. The management team can save time, energy and costs with more accurate data, which is then intelligently applied across the workforce to truly engage with staff, customers and partners. From a human capital management (HCM) perspective, mobility can help you close the loop on true talent management. It can enhance what managers can offer and what employees can provide in return. It can create nested relationships and powerful partnerships. IT and HR - partners and stewards of mobility One effect of enterprise mobility is an evolution in the nature of the relationship between HR and IT from one of service provision to partnership. The reason for the dynamic shift is largely due to the 'bring your own device' (BYOD) movement, which is transitioning to a 'bring your own application' (BYOA) scenario. As enterprise technology has in some ways reverse-engineered its solutions to help manage this situation, the partnership between IT (the functional owner) and HR (the strategic enabler) is deeply entrenched. And it has to be. The CIO and the HR leader are faced with compliance and regulatory issues and concerns around information security and personal privacy on a daily basis, complicated by global reach and varied domestic legislation. There are tens of thousands of new mobile apps entering the market each month and, unlike many consumer applications which get downloaded but are often never opened again after initial perusal, enterprise applications are being relied upon by functional groups, not least by HR to enhance people management. It requires a systematic approach across all applications in use within the enterprise in order to ensure they're used to best effect. No turning back, and no desire to With real time analytics on performance and the ability for immediate feedback, there is no turning back for managers. In my experience with Oracle, our customers' operational efficiency is at record levels. It's clear as a result of the combination of individual KPIs and organisational goals, CIOs have been able to give HR leaders the ability to build predictive models that feed into an enterprise organisations' evolving strategy. It also helps them ensure regulatory compliance much more easily. Once an arduous task, with mobile enabled automation and quality data, compliance is simpler. Their world has changed for the better. For the CIO, mobility also assists them to optimise performance. While it doesn't come without challenges, mobile-enabled applications and the native experience users have with them means employees don't need high-level technical expertise to train users. It reduces the training and engagement required from the IT team so they can focus on other things that deliver value to the bottom line; all the while lowering the cost of assets and related maintenance work by simplifying processes. Rewards of a mobile enterprise outweigh risks With mobile tools allowing us to increasingly integrate our personal and professional lives, terms like "office hours" are becoming irrelevant, so work/life balance is a cultural must. Enterprises are expected to offer tools that enable workers to access information from anywhere, at any time, from any device. Employees want simplicity and convenience but it doesn't stop at private enterprise. This is a societal shift. Governments, which traditionally have been known to be slower to adopt newer technology, are also offering support for local businesses to go mobile. Several state government websites have advice on how to create mobile apps and more. And as recently as last week the Victorian Minister for Technology Gordon Rich-Phillips unveiled his State government's ICT roadmap for the next two years, which details an increased use of the public cloud, as well as mobile communications, and improved access to online data-sets. Tech giants are investing significantly in solutions designed to simplify mobile deployment and enablement. The mobility trend is creating a wave of change in the industry and driving transformation in the enterprise. If you're not on that wave, the business risk continues to rise as your competitiveness drops. Aaron is the Vice President of HCM Strategy at Oracle Corporation where he is responsible for researching and identifying emerging trends in the practice of Human Resources and works to deliver industry-leading technology solutions. Other responsibilities include, ownership of Oracle's innovative HCM solutions across JAPAC and enabling organisations to transform and modernise their workforce tools. Follow him on Twitter @aaronjgreen

Read the article

Getting Started With Tailoring Business Processes

- by Richard Bingham

In this article, and for the sake of simplicity, we will use the term “On-Premise” to mean a deployment where you have design-time development access to the instance, including administration of the technology components, the applications filesystem, and the database. In reality this might be a local development instance that is then supported by a team who can deploy your customizations to the restricted production instance equivalents. Tools Overview Firstly let’s look at the Design-Time tools within JDeveloper for customizing and extending the artifacts of a Business Process. In essence this falls into two buckets; SOA Composite Editor for working with BPEL processes, and the BPM Studio. The SOA Composite Editor As a standard extension to JDeveloper, this graphical design tool should be familiar to anyone previously worked with Oracle SOA Server. With easy-to-use modeling capability, backed-up by full XML source-view (for read-only), it provides everything that is needed to implement the technical design. In simple terms, once deployed to the remote SOA Server the composite components (like Mediator) leverage the Event Delivery Network (EDN) for interaction with the application logic. If you are customizing an existing Fusion Applications BPEL process then be aware that it does support MDS-based customization layers just like Page Composer where different customizations are used based on the run-time context, like for a specific Product or Business Unit. This also makes them safe from patching and upgrades, although only a single active version of the composite is available at run-time. This is defined by a field on the composite record, available in Enterprise Manager. Obviously if you wish to fire different activities and tasks based on the user context then you can should include switches to fork the flows in your custom BPEL process. Figure 1 – A BPEL process in Composite Editor The following describes the simplified steps for making customizations to BPEL processes. This is the most common method of changing the business processes of Fusion Applications, as over 400 BPEL-based composite applications are provided out-of-the-box. Setup your local Fusion Applications JDeveloper environment. The SOA Composite Editor should be installed as part of the Fusion Applications extension. If there are problems you can also find it under the ‘Check for Updates’ help menu option. Since SOA Server is not part of the JDeveloper integrated WebLogic Server, setup a standalone WebLogic environment for deploying and testing. Obviously you might use a Fusion Applications development instance also. Package the existing standard Fusion Applications SOA Composite using Enterprise Manager and export it as a complete SOA Archive (SAR) file, resulting in a local .jar file. You may need to ask your system administrator for this. Import the exported SAR .jar file into JDeveloper using the File menu, under the option ‘SOA Archive into SOA Project’. In JDeveloper set the appropriate customization layer values, and then change from the default role to the Fusion Applications Customization Developer role. Make the customizations and save the application project. Finally redeploy the composite application, either to a direct Application Server connection, or as a fresh SAR (jar) file that can then be re-imported and deployed via Enterprise Manager. The Business Process Management (BPM) Suite In addition to the relatively low-level development environment associated with BPEL process creation, Oracle provides a suite of products that allow business process adjustments to be made without the need for some of the programming skills. The aim is to abstract much of the technical implementation and to provide a Business Analyst tools for immediately implementing organization changes. Obviously there are some limitations on what they can do, however the BPM Suite functionality increases with each release and for the majority of the cases the tools remains as applicable as its developer-orientated sister. At the current time business processes must be explicitly coded to support just one of these use-cases, either BPEL for developer use or BPM for business analyst use. That said, they both run on the same SOA Server in much the same way. The components bundled in each SOA Composite Application can be verified by inspection through Enterprise Manager. Figure 2 – A BPM Process in JDeveloper BPM Suite. BPM processes are written in a standard notation (BPMN) and the modeling tools are very similar to that of BPEL. The steps to deploy a custom BPM process are also essentially much the same, since the BPM process is bundled into a SOA Composite just like a BPEL process. As such the SOA Composite Editor actually has support for both artifacts and even allows use of them together, such as a calling a BPM process as a partnerlink from a BPEL process. For more details see the references below. Business Analyst Tooling In addition to using JDeveloper extensions for BPM development, there are run-time tools that Business Analysts can use to make adjustments, so that without high costs of an IT project the system can be tuned to match changes to the business operation. The first tool to consider is the BPM Composer, deployed with the middleware SOA Server and accessible online, and for Fusion Applications it is under the Business Process icon on the homepage of the Application Composer. Figure 3 – Business Process Composer showing a CRM process flow. The key difference between this and using JDeveloper is that the BPM Composer has a Business Catalog prepopulated with features and functions that can be used, mostly through registered WebServices. This means no coding or complex interface development is required, simply drag-drop-configure. The items in the business catalog are seeded by either Oracle (as a BPM Template) or added to by your own custom development. You cannot create or generate catalog content from BPM Composer directly. As per the screenshot you can see the Business Catalog content in the BPM Project browser region. In addition, other online tools for use by Business Analysts include the BPM Worklist application for editing business rules and approval management configuration, plus the SOA Composer which focuses on non-approval business rules and domain value maps. At the current time there are only a handful of BPM processes shipped with Fusion Applications HCM and CRM, including on-boarding workers and processing customer registrations. This also means a limited number of associated BPM Templates provided out-of-the-box, therefore a limited Business Catalog. That said, BPM-based extension is a powerful capability to leverage and will most likely develop going forwards, especially for use in SaaS deployments where full design-time JDeveloper access is not available. Further Reading For BPEL – Fusion Applications Extensibility Guide – Section 12 For BPM – Fusion Applications Extensibility Guide – Section 7 The product-specific documentation and implementation guides for Fusion Applications Fusion Middleware Developers Guide for SOA Suite Modeling and Implementation Guide for Oracle Business Process Management User’s Guide for Oracle Business Process Composer Oracle University courses on BPM Suite and SOA Development

Read the article

Character jump animation is not working when i hit the space bar

- by muzzy

i am having an issue with my game in XNA. My jump sprite sheet for my character does not trigger when i hit the space bar. I cant seem to find the problem. Please help me. I am also put the code below to make things easier. namespace WindowsGame4 { public class Game1 : Microsoft.Xna.Framework.Game { GraphicsDeviceManager graphics; SpriteBatch spriteBatch; // start of new code Texture2D playerWalk; // sprite sheet of walk cycle (14 frames) Texture2D idle; // idle animation Texture2D jump; // jump animation Vector2 playerPos; // to hold x and y position info for the player Point frameDimensions; // to hold width and height values for the frames int presentFrame; // to record which frame we are on at any given time int noOfFrames; // to hold the total number of frames in the spritesheet int elapsedTime; // to know how long each frame has been shown int frameDuration; // to hold info about how long each frame should be shown SpriteEffects flipDirection; // SpriteEffects object int speed; //rate of movement int upMovement; int downMovement; int rightMovement; int leftMovement; int jumpApex; string state; //this is going to be "idle","walking" or "jumping". KeyboardState previousKeyboardState; Vector2 originalPlayerPos; Vector2 movementDirection; Vector2 movementSpeed; public Game1() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; } protected override void Initialize() { // textures will be defined in the LoadContent() method playerPos = new Vector2(0, 200); // starting position for the player is at the left of the screen, and a Y position of 200 frameDimensions = new Point(55, 65); // each frame in the idle sprite sheet is 55 wide by 65 high presentFrame = 0; // start at frame 0 noOfFrames = 5; // there are 5 frames in the idle cycle elapsedTime = 0; // set elapsed time to start at 0 frameDuration = 80; // 80 milliseconds is how long each frame will show for (the higher the number, the slower the animation) flipDirection = SpriteEffects.None; // set the value of flipDirection to none speed = 200; upMovement = -2; downMovement = 2; rightMovement = 1; leftMovement = -1; jumpApex = 100; state = "idle"; previousKeyboardState = Keyboard.GetState(); originalPlayerPos = Vector2.Zero; movementDirection = Vector2.Zero; movementSpeed = Vector2.Zero; base.Initialize(); } protected override void LoadContent() { spriteBatch = new SpriteBatch(GraphicsDevice); playerWalk = Content.Load<Texture2D>("sprites/walkSmall"); // load the walk cycle spritesheet idle = Content.Load<Texture2D>("sprites/idleCycle"); // load the idle cycle sprite sheet jump = Content.Load<Texture2D>("sprites/jump"); // load the jump cycle sprite sheet } protected override void UnloadContent() // we're not using this method at the moment { } protected override void Update(GameTime gameTime) // Update method - used it to call a number of other methods { if (Keyboard.GetState().IsKeyDown(Keys.Escape)) { this.Exit(); // Exit the game if the Escape key is pressed } KeyboardState presentKeyboardState = Keyboard.GetState(); UpdateMovement(presentKeyboardState, gameTime); UpdateIdle(presentKeyboardState, gameTime); UpdateJump(presentKeyboardState); UpdateAnimation(gameTime); playerPos += movementDirection * movementSpeed * (float)gameTime.ElapsedGameTime.TotalSeconds; previousKeyboardState = presentKeyboardState; base.Update(gameTime); } private void UpdateAnimation(GameTime gameTime) { elapsedTime += gameTime.ElapsedGameTime.Milliseconds; if (elapsedTime > frameDuration) { elapsedTime -= frameDuration; elapsedTime = elapsedTime - frameDuration; presentFrame++; if (presentFrame > noOfFrames) if (state != "jumping") { presentFrame = 0; } else { presentFrame = 8; } } } protected void UpdateMovement(KeyboardState presentKeyboardState, GameTime gameTime) { if (state == "idle") { movementSpeed = Vector2.Zero; movementDirection = Vector2.Zero; if (presentKeyboardState.IsKeyDown(Keys.Left)) { state = "walking"; movementSpeed.X = speed; movementDirection.X = leftMovement; flipDirection = SpriteEffects.FlipHorizontally; } if (presentKeyboardState.IsKeyDown(Keys.Right)) { state = "walking"; movementSpeed.X = speed; movementDirection.X = rightMovement; flipDirection = SpriteEffects.None; } } } private void UpdateIdle(KeyboardState presentKeyboardState, GameTime gameTime) { if ((presentKeyboardState.IsKeyUp(Keys.Left) && previousKeyboardState.IsKeyDown(Keys.Left) || presentKeyboardState.IsKeyUp(Keys.Right) && previousKeyboardState.IsKeyDown(Keys.Right) && state != "jumping")) { state = "idle"; } } private void UpdateJump(KeyboardState presentKeyboardState) { if (state == "walking" || state == "idle") { if (presentKeyboardState.IsKeyDown(Keys.Space) && !presentKeyboardState.IsKeyDown(Keys.Space)) { presentFrame = 1; DoJump(); } } if (state == "jumping") { if (originalPlayerPos.Y - playerPos.Y > jumpApex) { movementDirection.Y = downMovement; } if (playerPos.Y > originalPlayerPos.Y) { playerPos.Y = originalPlayerPos.Y; state = "idle"; movementDirection = Vector2.Zero; } } } private void DoJump() { if (state != "jumping") { state = "jumping"; originalPlayerPos = playerPos; movementDirection.Y = upMovement; movementSpeed = new Vector2(speed, speed); } } protected override void Draw(GameTime gameTime) // Draw method { GraphicsDevice.Clear(Color.CornflowerBlue); spriteBatch.Begin(); // begin the spritebatch if (state == "walking") { noOfFrames = 14; frameDimensions = new Point(55, 65); Vector2 playerWalkPos = new Vector2(playerPos.X, playerPos.Y - 28); spriteBatch.Draw(playerWalk, playerWalkPos, new Rectangle((presentFrame * frameDimensions.X), 0, frameDimensions.X, frameDimensions.Y), Color.White, 0, Vector2.Zero, 1, flipDirection, 0); } if (state == "idle") { noOfFrames = 5; frameDimensions = new Point(55, 65); Vector2 idlePos = new Vector2(playerPos.X, playerPos.Y - 28); spriteBatch.Draw(idle, idlePos, new Rectangle((presentFrame * frameDimensions.X), 0, frameDimensions.X, frameDimensions.Y), Color.White, 0, Vector2.Zero, 1, flipDirection, 0); } if (state == "jumping") { noOfFrames = 9; frameDimensions = new Point(55, 92); Vector2 jumpPos = new Vector2(playerPos.X, playerPos.Y - 28); spriteBatch.Draw(jump, jumpPos, new Rectangle((presentFrame * frameDimensions.X), 0, frameDimensions.X, frameDimensions.Y), Color.White, 0, Vector2.Zero, 1, flipDirection, 0); } spriteBatch.End(); // end the spritebatch commands base.Draw(gameTime); } } }

Read the article

Displaylink USB show "Logo / Loading" on monitor

- by Ken Le

I tried with this problem for 2 years already. LOL, today, I install Ubuntu for I have to resolve it or I will back to stupid Windows 7. First, I have 3 monitors. My graphic card is support dual ( ATI Radeon ), so I have no problem on extend those multi monitor on VGA and DVI. The 3rd monitor is Displaylink USB. After installed everything required, when I reboot, the displaylink monitor show "Ubuntu ...." like logo / loading screen. I go to System Display , Detect monitor, it only show my 1st and 2nd, NO 3RD Displaylink. I can move my mouse between those 1st & 2nd, but the 3rd is only show the Ubuntu Screen. I press Ctrl+Alt+1, then screen switch to Displaylink USB 3RD monitor, but its "Terminal" not a desktop. Then I press Ctrl+Alt+7 , the screen switch back to my 1st, 2nd, and the displaylink 3rd is witch back to Logo / Ubuntu again. This is my /etc/X11/xorg.conf : Section "ServerLayout" Identifier "X.org Configured" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen 1 "DisplayLinkScreen" Leftof "aticonfig-Screen[0]-0" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "dbe" Load "dri" Load "record" Load "extmod" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "DisplayLinkMonitor" EndSection Section "Monitor" Identifier "0-DFP1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1680x1050" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "1680 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "FBTexPercent" # <i> #Option "DepthBits" # <i> #Option "PCIAPERSize" # <i> #Option "AccelDFS" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "CustomEDID" # [<str>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # <i> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ClockGating" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] #Option "TVDACLoadDetect" # [<bool>] #Option "ForceTVOut" # [<bool>] #Option "TVStandard" # <str> #Option "IgnoreLidStatus" # [<bool>] #Option "DefaultTVDACAdj" # [<bool>] #Option "Int10" # [<bool>] #Option "EXAVSync" # [<bool>] #Option "ATOMTVOut" # [<bool>] #Option "R4xxATOM" # [<bool>] #Option "ForceLowPowerMode" # [<bool>] #Option "DynamicPM" # [<bool>] #Option "NewPLL" # [<bool>] #Option "ZaphodHeads" # <str> Identifier "Card0" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "Rotate" # <str> #Option "fbdev" # <str> #Option "debug" # [<bool>] Identifier "Card1" Driver "fbdev" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "DefaultRefresh" # [<bool>] #Option "ModeSetClearScreen" # [<bool>] Identifier "Card2" Driver "vesa" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" Option "Monitor-DFP1" "0-DFP1" Option "Monitor-CRT2" "0-CRT2" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "DisplayLinkDevice" Driver "displaylink" Option "fbdev" "/dev/fb1" Option "ShadowFB" "off" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 3600 1920 Depth 24 EndSubSection EndSection Section "Screen" Identifier "DisplayLinkScreen" Device "DisplayLinkDevice" Monitor "DisplayLinkMonitor" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1920x1080" EndSubSection EndSection

Read the article

Oracle Certification and virtualization Solutions.

- by scoter

As stated in official MOS ( My Oracle Support ) document 249212.1 support for Oracle products on non-Oracle VM platforms follow exactly the same stance as support for VMware and, so, the only x86 virtualization software solution certified for any Oracle product is "Oracle VM". Based on the fact that: Oracle VM is totally free ( you have the option to buy Oracle-Support ) Certified is pretty different from supported ( OracleVM is certified, others could be supported ) With Oracle VM you may not require to reproduce your issue(s) on physical server Oracle VM is the only x86 software solution that allows hard-partitioning *** *** see details to these Oracle public links: http://www.oracle.com/technetwork/server-storage/vm/ovm-hardpart-168217.pdf http://www.oracle.com/us/corporate/pricing/partitioning-070609.pdf people started asking to migrate from third party virtualization software (ex. RH KVM, VMWare) to Oracle VM. Migrating RH KVM guest to Oracle VM. OracleVM has a built-in P2V utility ( Official Documentation ) but in some cases we can't use it, due to : network inaccessibility between hypervisors ( KVM and OVM ) network slowness between hypervisors (KVM and OVM) size of the guest virtual-disks Here you'll find a step-by-step guide to "manually" migrate a guest machine from KVM to OVM. 1. Verify source guest characteristics. Using KVM web console you can verify characteristics of the guest you need to migrate, such as: CPU Cores details Defined Memory ( RAM ) Name of your guest Guest operating system Disks details ( number and size ) Network details ( number of NICs and network configuration ) 2. Export your guest in OVF / OVA format. The export from Redhat KVM ( kernel virtual machine ) will create a structured export of your guest: [root@ovmserver1 mnt]# lltotal 12drwxrwx--- 5 36 36 4096 Oct 19 2012 b8296fca-13c4-4841-a50f-773b5139fcee b8296fca-13c4-4841-a50f-773b5139fcee is the ID of the guest exported from RH-KVM [root@ovmserver1 mnt]# cd b8296fca-13c4-4841-a50f-773b5139fcee/[root@ovmserver1 b8296fca-13c4-4841-a50f-773b5139fcee]# ls -ltrtotal 12drwxr-x--- 4 36 36 4096 Oct 19 2012 masterdrwxrwx--- 2 36 36 4096 Oct 29 2012 dom_mddrwxrwx--- 4 36 36 4096 Oct 31 2012 images images contains your virtual-disks exported [root@ovmserver1 b8296fca-13c4-4841-a50f-773b5139fcee]# cd images/[root@ovmserver1 images]# ls -ltratotal 16drwxrwx--- 5 36 36 4096 Oct 19 2012 ..drwxrwx--- 2 36 36 4096 Oct 31 2012 d4ef928d-6dc6-4743-b20d-568b424728a5drwxrwx--- 2 36 36 4096 Oct 31 2012 4b241ea0-43aa-4f3b-ab7d-2fc633b491a1drwxrwx--- 4 36 36 4096 Oct 31 2012 .[root@ovmserver1 images]# cd d4ef928d-6dc6-4743-b20d-568b424728a5/[root@ovmserver1 d4ef928d-6dc6-4743-b20d-568b424728a5]# ls -ltotal 5169092-rwxr----- 1 36 36 187904819200 Oct 31 2012 4c03b1cf-67cc-4af0-ad1e-529fd665dac1-rw-rw---- 1 36 36 341 Oct 31 2012 4c03b1cf-67cc-4af0-ad1e-529fd665dac1.meta[root@ovmserver1 d4ef928d-6dc6-4743-b20d-568b424728a5]# file 4c03b1cf-67cc-4af0-ad1e-529fd665dac14c03b1cf-67cc-4af0-ad1e-529fd665dac1: LVM2 (Linux Logical Volume Manager) , UUID: sZL1Ttpy0vNqykaPahEo3hK3lGhwspv 4c03b1cf-67cc-4af0-ad1e-529fd665dac1 is the first exported disk ( physical volume ) [root@ovmserver1 d4ef928d-6dc6-4743-b20d-568b424728a5]# cd ../4b241ea0-43aa-4f3b-ab7d-2fc633b491a1/[root@ovmserver1 4b241ea0-43aa-4f3b-ab7d-2fc633b491a1]# ls -ltotal 5568076-rwxr----- 1 36 36 107374182400 Oct 31 2012 9020f2e1-7b8a-4641-8f80-749768cc237a-rw-rw---- 1 36 36 341 Oct 31 2012 9020f2e1-7b8a-4641-8f80-749768cc237a.meta[root@ovmserver1 4b241ea0-43aa-4f3b-ab7d-2fc633b491a1]# file 9020f2e1-7b8a-4641-8f80-749768cc237a9020f2e1-7b8a-4641-8f80-749768cc237a: x86 boot sector; partition 1: ID=0x83, active, starthead 1, startsector 63, 401562 sectors; partition 2: ID=0x82, starthead 0, startsector 401625, 65529135 sectors; startsector 63, 401562 sectors; partition 2: ID=0x82, starthead 0, startsector 401625, 65529135 sectors; partition 3: ID=0x83, starthead 254, startsector 65930760, 8385930 sectors; partition 4: ID=0x5, starthead 254, startsector 74316690, 135395820 sectors, code offset 0x48 9020f2e1-7b8a-4641-8f80-749768cc237a is the second exported disk, with partition 1 bootable 3. Prepare the new guest on Oracle VM. By Ovm-Manager we can prepare the guest where we will move the exported virtual-disks; under the Tab "Servers and VMs": click on and create your guest with parameters collected before (point 1): - add NICs on different networks: - add virtual-disks; in this case we add two disks of 1.0 GB each one; we will extend the virtual disk copying the source KVM virtual-disk ( see next steps ) - verify virtual-disks created ( under Repositories tab ) 4. Verify OVM virtual-disks names. [root@ovmserver1 VirtualMachines]# grep -r hyptest_rdbms * 0004fb0000060000a906b423f44da98e/vm.cfg:OVM_simple_name = 'hyptest_rdbms' [root@ovmserver1 VirtualMachines]# cd 0004fb0000060000a906b423f44da98e [root@ovmserver1 0004fb0000060000a906b423f44da98e]# more vm.cfgvif = ['mac=00:21:f6:0f:3f:85,bridge=0004fb001089128', 'mac=00:21:f6:0f:3f:8e,bridge=0004fb00101971d'] OVM_simple_name = 'hyptest_rdbms' vnclisten = '127.0.0.1' disk = ['file:/OVS/Repositories/0004fb00000300004f17b7368139eb41/ VirtualDisks/0004fb000012000097c1bfea9834b17d.img,xvda,w', 'file:/OVS/Repositories/0004fb00000300004f17b7368139eb41/VirtualDisks/ 0004fb0000120000cde6a11c3cb1d0be.img,xvdb,w'] vncunused = '1' uuid = '0004fb00-0006-0000-a906-b423f44da98e' on_reboot = 'restart' cpu_weight = 27500 memory = 32768 cpu_cap = 0 maxvcpus = 8 OVM_high_availability = True maxmem = 32768 vnc = '1' OVM_description = '' on_poweroff = 'destroy' on_crash = 'restart' name = '0004fb0000060000a906b423f44da98e' guest_os_type = 'linux' builder = 'hvm' vcpus = 8 keymap = 'en-us' OVM_os_type = 'Oracle Linux 5' OVM_cpu_compat_group = '' OVM_domain_type = 'xen_hvm' disk2 ovm ==> /OVS/Repositories/0004fb00000300004f17b7368139eb41/VirtualDisks/ 0004fb0000120000cde6a11c3cb1d0be.img disk1 ovm ==> /OVS/Repositories/0004fb00000300004f17b7368139eb41/VirtualDisks/ 0004fb000012000097c1bfea9834b17d.img Summarizing disk1 --source ==> /mnt/b8296fca-13c4-4841-a50f-773b5139fcee/images/4b241ea0-43aa-4f3b-ab7d-2fc633b491a1/9020f2e1-7b8a-4641-8f80-749768cc237a disk1 --dest ==> /OVS/Repositories/0004fb00000300004f17b7368139eb41/VirtualDisks/ 0004fb000012000097c1bfea9834b17d.img disk2 --source ==> /mnt/b8296fca-13c4-4841-a50f-773b5139fcee/images/d4ef928d-6dc6-4743-b20d-568b424728a5/4c03b1cf-67cc-4af0-ad1e-529fd665dac1 disk2 --dest ==> /OVS/Repositories/0004fb00000300004f17b7368139eb41/VirtualDisks/ 0004fb0000120000cde6a11c3cb1d0be.img 5. Copy KVM exported virtual-disks to OVM virtual-disks. Keeping your Oracle VM guest stopped you can copy KVM exported virtual-disks to OVM virtual-disks; what I did is only to locally mount the filesystem containing the exported virtual-disk ( by an usb device ) on my OVS; the copy automatically resize OVM virtual-disks ( previously created with a size of 1GB ) . nohup cp /mnt/b8296fca-13c4-4841-a50f-773b5139fcee/images/4b241ea0-43aa-4f3b-ab7d-2fc633b491a1/9020f2e1-7b8a-4641-8f80-749768cc237a /OVS/Repositories/0004fb00000300004f17b7368139eb41/VirtualDisks/0004fb000012000097c1bfea9834b17d.img & nohup cp /mnt/b8296fca-13c4-4841-a50f-773b5139fcee/images/d4ef928d-6dc6-4743-b20d-568b424728a5/4c03b1cf-67cc-4af0-ad1e-529fd665dac1 /OVS/Repositories/0004fb00000300004f17b7368139eb41/VirtualDisks/0004fb0000120000cde6a11c3cb1d0be.img & 7. When copy completed refresh repository to aknowledge the new-disks size. 7. After "refresh repository" is completed, start guest machine by Oracle VM manager. After the first start of your guest: - verify that you can see all disks and partitions - verify that your guest is network reachable ( MAC Address of your NICs changed ) Eventually you can also evaluate to convert your guest to PVM ( Paravirtualized virtual Machine ) following official Oracle documentation. Ciao Simon COTER ps: next-time I'd like to post an article reporting how to manually migrate Virtual-Iron guests to OracleVM. Comments and corrections are welcome.

Read the article

Restoring databases to a set drive and directory

- by okeofs

Restoring databases to a set drive and directory Introduction Often people say that necessity is the mother of invention. In this case I was faced with the dilemma of having to restore several databases, with multiple ‘ndf’ files, and having to restore them with different physical file names, drives and directories on servers other than the servers from which they originated. As most of us would do, I went to Google to see if I could find some code to achieve this task and found some interesting snippets on Pinal Dave’s website. Naturally, I had to take it further than the code snippet, HOWEVER it was a great place to start. Creating a temp table to hold database file details First off, I created a temp table which would hold the details of the individual data files within the database. Although there are a plethora of fields (within the temp table below), I utilize LogicalName only within this example. The temporary table structure may be seen below: create table #tmp ( LogicalName nvarchar(128) ,PhysicalName nvarchar(260) ,Type char(1) ,FileGroupName nvarchar(128) ,Size numeric(20,0) ,MaxSize numeric(20,0), Fileid tinyint, CreateLSN numeric(25,0), DropLSN numeric(25, 0), UniqueID uniqueidentifier, ReadOnlyLSN numeric(25,0), ReadWriteLSN numeric(25,0), BackupSizeInBytes bigint, SourceBlocSize int, FileGroupId int, LogGroupGUID uniqueidentifier, DifferentialBaseLSN numeric(25,0), DifferentialBaseGUID uniqueidentifier, IsReadOnly bit, IsPresent bit, TDEThumbPrint varchar(50) ) We now declare and populate a variable(@path), setting the variable to the path to our SOURCE database backup. declare @path varchar(50) set @path = 'P:\DATA\MYDATABASE.bak' From this point, we insert the file details of our database into the temp table. Note that we do so by utilizing a restore statement HOWEVER doing so in ‘filelistonly’ mode. insert #tmp EXEC ('restore filelistonly from disk = ''' + @path + '''') At this point, I depart from what I gleaned from Pinal Dave. I now instantiate a few more local variables. The use of each variable will be evident within the cursor (which follows): Declare @RestoreString as Varchar(max) Declare @NRestoreString as NVarchar(max) Declare @LogicalName as varchar(75) Declare @counter as int Declare @rows as int set @counter = 1 select @rows = COUNT(*) from #tmp -- Count the number of records in the temp -- table Declaring and populating the cursor At this point I do realize that many people are cringing about the use of a cursor. Being an Oracle professional as well, I have learnt that there is a time and place for cursors. I would remind the reader that the data that will be read into the cursor is from a local temp table and as such, any locking of the records (within the temp table) is not really an issue. DECLARE MY_CURSOR Cursor FOR Select LogicalName From #tmp Parsing the logical names from within the cursor. A small caveat that works in our favour, is that the first logical name (of our database) is the logical name of the primary data file (.mdf). Other files, except for the very last logical name, belong to secondary data files. The last logical name is that of our database log file. I now open my cursor and populate the variable @RestoreString Open My_Cursor set @RestoreString = 'RESTORE DATABASE [MYDATABASE] FROM DISK = N''P:\DATA\ MYDATABASE.bak''' + ' with ' We now fetch the first record from the temp table. Fetch NEXT FROM MY_Cursor INTO @LogicalName While there are STILL records left within the cursor, we dynamically build our restore string. Note that we are using concatenation to create ‘one big restore executable string’. Note also that the target physical file name is hardwired, as is the target directory. While (@@FETCH_STATUS <> -1) BEGIN IF (@@FETCH_STATUS <> -2) -- As long as there are no rows missing select @RestoreString = case when @counter = 1 then -- This is the mdf file @RestoreString + 'move N''' + @LogicalName + '''' + ' TO N’’X:\DATA1\'+ @LogicalName + '.mdf' + '''' + ', ' -- OK, if it passes through here we are dealing with an .ndf file -- Note that Counter must be greater than 1 and less than the number of rows. when @counter > 1 and @counter < @rows then -- These are the ndf file(s) @RestoreString + 'move N''' + @LogicalName + '''' + ' TO N’’X:\DATA1\'+ @LogicalName + '.ndf' + '''' + ', ' -- OK, if it passes through here we are dealing with the log file When @LogicalName like '%log%' then @RestoreString + 'move N''' + @LogicalName + '''' + ' TO N’’X:\DATA1\'+ @LogicalName + '.ldf' +'''' end --Increment the counter set @counter = @counter + 1 FETCH NEXT FROM MY_CURSOR INTO @LogicalName END At this point we have populated the varchar(max) variable @RestoreString with a concatenation of all the necessary file names. What we now need to do is to run the sp_executesql stored procedure, to effect the restore. First, we must place our ‘concatenated string’ into an nvarchar based variable. Obviously this will only work as long as the length of @RestoreString is less than varchar(max) / 2. set @NRestoreString = @RestoreString EXEC sp_executesql @NRestoreString Upon completion of this step, the database should be restored to the server. I now close and deallocate the cursor, and to be clean, I would also drop my temp table. CLOSE MY_CURSOR DEALLOCATE MY_CURSOR GO Conclusion Restoration of databases on different servers with different physical names and on different drives are a fact of life. Through the use of a few variables and a simple cursor, we may achieve an efficient and effective way to achieve this task.

Read the article

Making Those PanelBoxes Behave

- by Duncan Mills

I have a little problem to solve earlier this week - misbehaving <af:panelBox> components... What do I mean by that? Well here's the scenario, I have a page fragment containing a set of panelBoxes arranged vertically. As it happens, they are stamped out in a loop but that does not really matter. What I want to be able to do is to provide the user with a simple UI to close and open all of the panelBoxes in concert. This could also apply to showDetailHeader and similar items with a disclosed attrubute, but in this case it's good old panelBoxes. Ok, so the basic solution to this should be self evident. I can set up a suitable scoped managed bean that the panelBoxes all refer to for their disclosed attribute state. Then the open all / close commandButtons in the UI can simply set the state of that bean for all the panelBoxes to pick up via EL on their disclosed attribute. Sound OK? Well that works basically without a hitch, but turns out that there is a slight problem and this is where the framework is attempting to be a little too helpful. The issue is that is the user manually discloses or hides a panelBox then that will override the value that the EL is setting. So for example. I start the page with all panelBoxes collapsed, all set by the EL state I'm storing on the session I manually disclose panelBox no 1. I press the Expand All button - all works as you would hope and all the panelBoxes are now disclosed, including of course panelBox 1 which I just expanded manually. Finally I press the Collapse All button and everything collapses except that first panelBox that I manually disclosed. The problem is that the component remembers this manual disclosure and that overrides the value provided by the expression. If I change the viewId (navigate away and back) then the panelBox will start to behave again, until of course I touch it again! Now, the more astute amoungst you would think (as I did) Ah, sound like the MDS personalizaton stuff is getting in the way and the solution should simply be to set the dontPersist attribute to disclosed | ALL. Alas this does not fix the issue. After a little noodling on the best way to approach this I came up with a solution that works well, although if you think of an alternative way do let me know. The principle is simple. In the disclosureListener for the panelBox I take a note of the clientID of the panelBox component that has been touched by the user along with the state. This all gets stored in a Map of Booleans in ViewScope which is keyed by clientID and stores the current disclosed state in the Boolean value. The listener looks like this (it's held in a request scope backing bean for the page): public void handlePBDisclosureEvent(DisclosureEvent disclosureEvent) { String clientId = disclosureEvent.getComponent().getClientId(FacesContext.getCurrentInstance()); boolean state = disclosureEvent.isExpanded(); pbState.addTouchedPanelBox(clientId, state); } The pbState variable referenced here is a reference to the bean which will hold the state of the panelBoxes that lives in viewScope (recall that everything is re-set when the viewid is changed so keeping this in viewScope is just fine and cleans things up automatically). The addTouchedPanelBox() method looks like this: public void addTouchedPanelBox(String clientId, boolean state) { //create the cache if needed this is just a Map<String,Boolean> if (_touchedPanelBoxState == null) { _touchedPanelBoxState = new HashMap<String, Boolean>(); } // Simply put / replace _touchedPanelBoxState.put(clientId, state); } So that's the first part, we now have a record of every panelBox that the user has touched. So what do we do when the Collapse All or Expand All buttons are pressed? Here we do some JavaScript magic. Basically for each clientID that we have stored away, we issue a client side disclosure event from JavaScript - just as if the user had gone back and changed it manually. So here's the Collapse All button action: public String CloseAllAction() { submitDiscloseOverride(pbState.getTouchedClientIds(true), false); _uiManager.closeAllBoxes(); return null; } The _uiManager.closeAllBoxes() method is just manipulating the master-state that all of the panelBoxes are bound to using EL. The interesting bit though is the line: submitDiscloseOverride(pbState.getTouchedClientIds(true), false); To break that down, the first part is a call to that viewScoped state holder to ask for a list of clientIDs that need to be "tweaked": public String getTouchedClientIds(boolean targetState) { StringBuilder sb = new StringBuilder(); if (_touchedPanelBoxState != null && _touchedPanelBoxState.size() > 0) { for (Map.Entry<String, Boolean> entry : _touchedPanelBoxState.entrySet()) { if (entry.getValue() == targetState) { if (sb.length() > 0) { sb.append(','); } sb.append(entry.getKey()); } } } return sb.toString(); } You'll notice that this method only processes those panelBoxes that will be in the wrong state and returns those as a comma separated list. This is then processed by the submitDiscloseOverride() method: private void submitDiscloseOverride(String clientIdList, boolean targetDisclosureState) { if (clientIdList != null && clientIdList.length() > 0) { FacesContext fctx = FacesContext.getCurrentInstance(); StringBuilder script = new StringBuilder(); script.append("overrideDiscloseHandler('"); script.append(clientIdList); script.append("',"); script.append(targetDisclosureState); script.append(");"); Service.getRenderKitService(fctx, ExtendedRenderKitService.class).addScript(fctx, script.toString()); } } This method constructs a JavaScript command to call a routine called overrideDiscloseHandler() in a script attached to the page (using the standard <af:resource> tag). That method parses out the list of clientIDs and sends the correct message to each one: function overrideDiscloseHandler(clientIdList, newState) { AdfLogger.LOGGER.logMessage(AdfLogger.INFO, "Disclosure Hander newState " + newState + " Called with: " + clientIdList); //Parse out the list of clientIds var clientIdArray = clientIdList.split(','); for (var i = 0; i < clientIdArray.length; i++){ var panelBox = flipPanel = AdfPage.PAGE.findComponentByAbsoluteId(clientIdArray[i]); if (panelBox.getComponentType() == "oracle.adf.RichPanelBox"){ panelBox.broadcast(new AdfDisclosureEvent(panelBox, newState)); } } } So there you go. You can see how, with a few tweaks the same code could be used for other components with disclosure that might suffer from the same problem, although I'd point out that the behavior I'm working around here us usually desirable. You can download the running example (11.1.2.2) from here.

Read the article

Data Guard - Snapshot Standby Database??

- by Jian Zhang-Oracle

?? -------- ?????,??standby?????mount??????????REDO??,??standby????????????????????,???????read-only???open????,????ACTIVE DATA GUARD,????standby?????????(read-only)??(????????),????standby???????????(read-write)? ?????,?????????????Real Application Testing(RAT)??????????,?????????standby??????snapshot standby?????????,??snapshot standby??????????,???????????(read-write)??????snapshot standby??????????????,?????????,??????????,????????,?????????snapshot standby?????standby???,????????? ?? --------- 1.??standby?????? SQL> Alter system set db_recovery_file_dest_size=500M; System altered. SQL> Alter system set db_recovery_file_dest='/u01/app/oracle/snapshot_standby'; System altered. 2.??standby?????? SQL> alter database recover managed standby database cancel; Database altered. 3.??standby???snapshot standby,??open snapshot standby SQL> alter database convert to snapshot standby; Database altered. SQL> alter database open; Database altered. ??snapshot standby??????SNAPSHOT STANDBY,open???READ WRITE: SQL> select DATABASE_ROLE,name,OPEN_MODE from v$database; DATABASE_ROLE NAME OPEN_MODE ---------------- --------- -------------------- SNAPSHOT STANDBY FSDB READ WRITE 4.?snapshot standby???????????Real Application Testing(RAT)????????? 5.?????,??snapshot standby???physical standby,?????????? SQL> shutdown immediate; Database closed. Database dismounted. ORACLE instance shut down. SQL> startup mount; ORACLE instance started. Database mounted. SQL> ALTER DATABASE CONVERT TO PHYSICAL STANDBY; Database altered. SQL> shutdown immediate; ORA-01507: database not mounted ORACLE instance shut down. SQL> startup mount; ORACLE instance started. Database mounted. SQL>ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION; Database altered. 5.?????standby?,???????PHYSICAL STANDBY,open???MOUNTED SQL> select DATABASE_ROLE,name,OPEN_MODE from v$database; DATABASE_ROLE NAME OPEN_MODE ---------------- --------- -------------------- PHYSICAL STANDBY FSDB MOUNTED 6.??????????????? ????: SQL> select ads.dest_id,max(sequence#) "Current Sequence", max(log_sequence) "Last Archived" from v$archived_log al, v$archive_dest ad, v$archive_dest_status ads where ad.dest_id=al.dest_id and al.dest_id=ads.dest_id and al.resetlogs_change#=(select max(resetlogs_change#) from v$archived_log ) group by ads.dest_id; DEST_ID Current Sequence Last Archived ---------- ---------------- ------------- 1 361 361 2 361 362 --???? SQL> select al.thrd "Thread", almax "Last Seq Received", lhmax "Last Seq Applied" from (select thread# thrd, max(sequence#) almax from v$archived_log where resetlogs_change#=(select resetlogs_change# from v$database) group by thread#) al, (select thread# thrd, max(sequence#) lhmax from v$log_history where resetlogs_change#=(select resetlogs_change# from v$database) group by thread#) lh where al.thrd = lh.thrd; Thread Last Seq Received Last Seq Applied ---------- ----------------- ---------------- 1 361 361 ??????????,???blog,???????????,??"??:Data Guard - Snapshot Standby Database??"

Read the article

Building an ASP.Net 4.5 Web forms application - part 5

- by nikolaosk

?his is the fifth post in a series of posts on how to design and implement an ASP.Net 4.5 Web Forms store that sells posters on line. There are 4 more posts in this series of posts.Please make sure you read them first.You can find the first post here. You can find the second post here. You can find the third post here.You can find the fourth here. In this new post we will build on the previous posts and we will demonstrate how to display the details of a poster when the user clicks on an individual poster photo/link. We will add a FormView control on a web form and will bind data from the database. FormView is a great web server control for displaying the details of a single record. 1) Launch Visual Studio and open your solution where your project lives2) Add a new web form item on the project.Make sure you include the Master Page.Name it PosterDetails.aspx 3) Open the PosterDetails.aspx page. We will add some markup in this page. Have a look at the code below <asp:Content ID="Content2" ContentPlaceHolderID="FeaturedContent" runat="server"> <asp:FormView ID="posterDetails" runat="server" ItemType="PostersOnLine.DAL.Poster" SelectMethod ="GetPosterDetails"> <ItemTemplate> <div> <h1><%#:Item.PosterName %></h1> </div> <br /> <table> <tr> <td> <img src="<%#:Item.PosterImgpath %>" border="1" alt="<%#:Item.PosterName %>" height="300" /> </td> <td style="vertical-align: top"> <b>Description:</b><br /><%#:Item.PosterDescription %> <br /> <span><b>Price:</b> <%#: String.Format("{0:c}", Item.PosterPrice) %></span> <br /> <span><b>Poster Number:</b> <%#:Item.PosterID %></span> <br /> </td> </tr> </table> </ItemTemplate> </asp:FormView></asp:Content> I set the ItemType property to the Poster entity class and the SelectMethod to the GetPosterDetails method.The Item binding expression is available and we can retrieve properties of the Poster object.I retrieve the name, the image,the description and the price of each poster. 4) Now we need to write the GetPosterDetails method.In the code behind of the PosterDetails.aspx page we type public IQueryable<Poster> GetPosterDetails([QueryString("PosterID")]int? posterid) { PosterContext ctx = new PosterContext(); IQueryable<Poster> query = ctx.Posters; if (posterid.HasValue && posterid > 0) { query = query.Where(p => p.PosterID == posterid); } else { query = null; } return query; } I bind the value from the query string to the posterid parameter at run time.This is all possible due to the QueryStringAttribute class that lives inside the System.Web.ModelBinding and gets the value of the query string variable PosterID.If there is a matching poster it is fetched from the database.If not,there is no data at all coming back from the database. 5) I run my application and then click on the "Midfielders" link.Then click on the first poster that appears from the left (Kenny Dalglish) and click on it to see the details. Have a look at the picture below to see the results. You can see that now I have all the details of the poster in a new page.?ake sure you place breakpoints in the code so you can see what is really going on. Hope it helps!!!

Read the article

Why JSF Matters (to You)

- by reza_rahman

"Those who have knowledge, don’t predict. Those who predict, don’t have knowledge." – Lao Tzu You may have noticed Thoughtworks recently crowned the likes AngularJS, etc imminent successors to server-side web frameworks. They apparently also deemed it necessary to single out JSF for righteous scorn. I have to say as I was reading the analysis I couldn't help but remember they also promptly jumped on the Ruby, Rails, Clojure, etc bandwagon a good few years ago seemingly similarly crowing these dynamic languages imminent successors to Java. I remember thinking then as I do now whether the folks at Thoughtworks are really that much smarter than me or if they are simply more prone to the Hipster buzz of the day. I'll let you make the final call on that one. I also noticed mention of "J2EE" in the context of JSF and had to wonder how up-to-date or knowledgeable the person writing the analysis actually was given that the term was basically retired almost a decade ago. There's one thing that I am absolutely sure about though - as a long time pretty happy user of JSF, I had no choice but to speak up on what I believe JSF offers. If you feel the same way, I would encourage you to support the team behind JSF whose hard work you may have benefited from over the years. True to his outspoken character PrimeFaces lead Cagatay Civici certainly did not mince words making the case for the JSF ecosystem - his excellent write-up is well worth a read. He specifically pointed out the practical problems in going whole hog with bare metal JavaScript, CSS, HTML for many development teams. I'll admit I had to smile when I read his closing sentence as well as the rather cheerful comments to the post from actual current JSF/PrimeFaces users that are apparently supposed to be on a gloomy death march. In a similar vein, OmniFaces developer Arjan Tijms did a great job pointing out the fact that despite the extremely competitive server-side Java Web UI space, JSF seems to manage to always consistently come out in either the number one or number two spot over many years and many data sources - do give his well-written message in the JAX-RS user forum a careful read. I don't think it's really reasonable to expect this to be the case for so many years if JSF was not at least a capable if not outstanding technology. If fact if you've ever wondered, Oracle itself is one of the largest JSF users on the planet. As Oracle's Shay Shmeltzer explains in a recent JSF Central interview, many of Oracle's strategic products such as ADF, ADF Mobile and Fusion Applications itself is built on JSF. There are well over 3,000 active developers working on these codebases. I don't think anyone can think of a more compelling reason to make sure that a technology is as effective as possible for practical development under real world conditions. Standing on the shoulders of the above giants, I feel like I can be pretty brief in making my own case for JSF: JSF is a powerful abstraction that brings the original Smalltalk MVC pattern to web development. This means cutting down boilerplate code to the bare minimum such that you really can think of just writing your view markup and then simply wire up some properties and event handlers on a POJO. The best way to see what this really means is to compare JSF code for a pretty small case to other approaches. You should then multiply the additional work for the typical enterprise project to try to understand what the productivity trade-offs are. This is reason alone for me to personally never take any other approach seriously as my primary web UI solution unless it can match the sheer productivity of JSF. Thanks to JSF's focus on components from the ground-up JSF has an extremely strong ecosystem that includes projects like PrimeFaces, RichFaces, OmniFaces, ICEFaces and of course ADF Faces/Mobile. These component libraries taken together constitute perhaps the largest widget set ever developed and optimized for a single web UI technology. To begin to grasp what this really means, just briefly browse the excellent PrimeFaces showcase and think about the fact that you can readily use the widgets on that showcase by just using some simple markup and knowing near to nothing about AJAX, JavaScript or CSS. JSF has the fair and legitimate advantage of being an open vendor neutral standard. This means that no single company, individual or insular clique controls JSF - openness, transparency, accountability, plurality, collaboration and inclusiveness is virtually guaranteed by the standards process itself. You have the option to choose between compatible implementations, escape any form of lock-in or even create your own compatible implementation! As you might gather from the quote at the top of the post, I am not a fan of crystal ball gazing and certainly don't want to engage in it myself. Who knows? However far-fetched it may seem maybe AngularJS is the only future we all have after all. If that is the case, so be it. Unlike what you might have been told, Java EE is about choice at heart and it can certainly work extremely well as a back-end for AngularJS. Likewise, you are also most certainly not limited to just JSF for working with Java EE - you have a rich set of choices like Struts 2, Vaadin, Errai, VRaptor 4, Wicket or perhaps even the new action-oriented web framework being considered for Java EE 8 based on the work in Jersey MVC... Please note that any views expressed here are my own only and certainly does not reflect the position of Oracle as a company.

Read the article

WebLogic Server 12c????????????????????????????????????/???????WebLogic Server 12c Forum 2012?????

- by ???02

2012?1??????WebLogic Server 12c???200??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????2012?8????????WebLogic Server 12c Forum 2012????????·??????????????????????????/?????????????????(???) ????????????WebLogic Server 12c????????? ??WebLogic Server???????·???????WebLogic Server?????????????????????????????????????WebLogic Server 12c Forum 2012?????????????????·????????????????????????????????????????????????????·?????????????WebLogic Server 12c??????????????/????????????? ???????????????????????????? ????????????????????????????????????? ?????? ??????????????????????????????????? ??????????????????????????????????????????????????????????????????????????“??????????????????????????”????????????????????????WebLogic Server 11g?????????????????? (1)????????????????????! = ??ID????????? WebLogic Server??????????????????????????????????????????????????????????????????????? ????????????????? ?????????·??????????????????? ??????init.d???????????? ???????????????ID????(boot.properties)??????????????????????WebLogic Server?????????????????????????????????? ???ID????????? <DOMAIN_HOME>/servers//security???????????·?????boot.properties????????????2??????? username= password= ???????????????????WebLogic Server?????????????????????????????????????????????????????????????????? (2)WLST???????????????????! = WLST????????? WebLogic Server???????????????????????????????????????????????????????????????/?????????????WLST(WebLogic Scripting Tool)????????????????????????????????????????????????????????????????????/????????????WLST?????????? ?????????????WLST???????????????????????Python?Java?????Jython?????????????WebLogic Server?????????????MBean???????????????????????????????????WLST?????????????Excel????????????????????????????????????????????????????????????????????????????WLST?????????????????????????????????? ?WLST???????????? ????????[????·????]-[???????]?????????????????[??]???????? ???????????????????????????[?????]????????py?????WLST???????????????????????????[??]??????????????????? ???????????????WLST?????????????????????WLST???????????????????????????????????????????????????????????????????? (3)????SQL?WebLogic Server???????! = ????·????? ??????????WebLogic Server??????????????????????????????SQL??????????????????????????????????·????????????????????????????????????????·???????????WebLogic Server????????·???????·???????????????WebLogic Server????/?????????????????????????????????????JDBC????????????????????????????SQL?ResultSet?????????????·????????? ????·????????????? ?????·??????? ????????[??]-[????]-[?????]-?????????????WebLogic Server?????/?????????????????????????????????????????[weblogic]-[jdbc]-[sql]-[DebugJDBCSQL]?????????[???]???????? ??????JDBC?????·???????·????????? ????/???????????????????????/???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? (4)[??]??????????????! = [??????????]????? ?[??]????????????????????????????????????????????????????????????????????????????[??]?????????????????????????????????2??????????????????????????????????????????????????????????????????????????????????????????????????????[??????????]?????????2?????????????????????????? ?????????2????????????? ????????[??????]-[???]-[???????????????]??????[???·???????]?????[??????????]?????????[??]???????? ??????????????????????????? (5)????????????????????????????! = ?V$SESSION.PROGRAM?????????????? ???Oracle Database?????????????????????????? WebLogic Server?????????????????????????????????????????????????????????????????????????????1??WebLogic Server????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ???????????????V$SESSION.PROGRAM?????????????Oracle Database?????????·?????????????????????????????????V$SESSION????????????????PROGRAM????????????????????????????WebLogic Server???????????????????????????JDBC Thin Client???JDBC????????????????????????????????????????PROGRAM???????????????????????·?????????????????????? V$SESSION.PROGRAM???????????????????????????? ?V$SESSION.PROGRAM??????????????? ???????????([???JDBC?????????]??)?[?????]?????1??????? v$session.program= (6)???·???????·????????! = ????·????·????????? WebLogic Server?????????????????????????????????(???·??)????????????????·???????1??????????????????????????????????????????WebLogic Server?????????????????????????????????? ??????????????????·????·?????????????????????????WebLogic Server?????????????????????????????????????? ???????????JDK???????Log4j????????????????WebLogic Server???????????????? WebLogic Server????????JDK?Log4j??????????????????JDK?????????? ????·????·???????????????? ?????·????·????????? JDK???Log4j?????????????????????/?????????????? ?JDK???:weblogic.logging.ServerLoggingHandler ?Log4j???:weblogic.logging.log4j.ServerLoggingAppender ??????Log4j?????????????(????)? <appender name="file" class="org.apache.log4j.FileAppender"> <param name="File" value=“applog.log" /> <param name="Append" value="true" /> <layout class="org.apache.log4j.PatternLayout"> <param name="ConversionPattern" value="%d %5p %c{1} - %m%n" /> </layout> </appender> <appender name="server" class="weblogic.logging.log4j.ServerLoggingAppender"/> ?????????????????????????????????????????WebLogic Server?????????????????????????????????????? ?JDK???:-Djava.util.loggin.config.file=<PATH> ?Log4j???:-Dlog4j.configuration=<PATH> ???????????WAR??????????????????????·????·??????????WebLogic Server??????????????????????????????????????WebLogic Server???????????????????? (7)BEA??????????????????????! = GetMessage??????? WebLogic Server????????·??????????????(?BEA-XXXXXX??????????????????BEA?????)????WebLogic Server?HTML??????????????????Web????????????????????????????????????????????? ????????????GetMessage?????????????BEA?????????????????????????????????????????? ?GetMessage????????? java?????WebLogic Server?GetMessage???????????? java weblogic.GetMessage ?????????? ?-id XXXX:???????????? ?-verbose:????????? ?-lang XX:???????(?????????????????????????????????????) ????BEA-000337?????????????????????????????? java weblogic.GetMessage -verbose -id 000337 -lang ja 000337: ?????"{2}"?????{0}?"{1}"??????????????????????????(StuckThreadMaxTime)"{3}"?????????????·????: {4} L10n?????: weblogic.kernel I18n?????: weblogic.kernel ??????: WebLogicServer ???: ??? ????·????: false ????????: ???????????????????????????????? ??: ???????????????????????????????????? ?????: ??????????????????????????????????????????????????????????????·???(weblogic.Admin THREAD_DUMP)????????? ?????????BEA?????????????????????????????????????????????????????????????????????????????????? ????????“WebLogic??”!? WebLogic Server 12c????/??? ????????????? ???????????? ????????????????? ?????????????? ???????????? ????????????WebLogic Server???????????????????????????????????????????????WebLogic Server 12c?????????????????????????????????????????????????????????WebLogic Server 11g(10.3.6)???????????? ?????????Mac OS X???(???????)?IE 6?7??????????????? ??OTN??????????????????System Requirements and Supported Platforms for WebLogic Server 12c (12.1.1.x)?????????????Mac OS?????????????2012?8?2?????Mac OS X Snow Leopard????Java SE 7?????????? ???Internet Explorer(IE) 6.x??7.x???????????????????IE????????IE 8.x???????????? ????Web?????WebLogic Server?????????Web???·??????64?????????????(WebLogic Server??????????64?????)?????????WebLogic Server????????????????????????????????????????? ?RESTful????????? Java EE 6?JAX-RS????????????WebLogic Server 12c???????????????????????????????????? ?RESTful??????????? [????]-[??]-[??]?[RESTful??????????]?????????WebLogic Server??????????????????URL?????????????????????????? http(s)://:/management/tenant-monitoring/servers ???????servers??????clusters???applications???datasources??????????????????????????????????????????????? ????HTML??????JSON?XML???????????????????????????????????????????????????????????????????? ?JDBC????????(1):??????·???? ???????????????????????WebLogic Server??????????????????????????????????12c??Active GridLink for RAC???????????????????????????????????? 1??????????·?????????????????????[????]?????????[??????]????????????????????????????????????????????????????????????????????? <DOMAIN_HOME>/servers//logs/datasource.log ?????????????????????????????????????? ??????????????????????WLDF????????????????WebLogic Server 12c?????????????????????? ?JDBC????????(2):?????????? ????????????????[??]-[?????]???[????]?????????????????????????????????????????????????????????????????WebLogic Server 12c?????????????????????????????????????? ??????????????????????????????????WebLogic Server 11g(10.3.1)???1??????????????????????????????????????? ?JDBC????????(3):????????? WebLogic Server 12c??[??]-[?????]????????????????????[?????????]???1???????????????????????????????????????????????????????????????????????????????????????????????????????????????Oracle Database?????????????????????????? ErrorCode ????? 3113 ???????end-of-file???????? 3114 Oracle?????????? 1033 Oracle??????????????? 1034 Oracle??????? 1089 ?????????? - ?????????? 1090 ???????? - ?????????? 17002 I/O?? ?????????(1):?????/?????????????????? ??????????2?????? 1???WebLogic Server????????????????????????????????????????? -Dweblogic.management.username= -Dweblogic.management.password= ????????????ID???????????????? ?????????(2):SSL????Certicom?????? SSL?????Certicom(?????10.3.3?????)???????JSSE(Java Secure Socket Extension)????????????????????????????????????????? ??????????????????????????????? ????????????WebLogic Server?????????????????????????????????Java?????????·????2??????????Java????????????????nodemanager.properties?????????????StartScriptEnabled?????????false??true?????? ?????????????false?????????????WebLogic Server??????????????????true??????????????startWebLogic???????????????WebLogic Server??????????????startWebLogic???????????????????????????????????????????????????????????????? ???/???????(1):setDomainEnv???????????????? ??/?????????????“?????·???”????????????????????????????2???? 1??setDomainEnv?????????????????????????????32???JDK????????Perm????????????? ?WebLogic Server 11g(10.3.5) MEM_PERM_SIZE_64BIT="-XX:PermSize=128m" MEM_PERM_SIZE_32BIT="-XX:PermSize=48m" ... MEM_MAX_PERM_SIZE_64BIT="-XX:MaxPermSize=256m" MEM_MAX_PERM_SIZE_32BIT="-XX:MaxPermSize=128m" ?WebLogic Server 12c(12.1.1) MEM_PERM_SIZE_64BIT="-XX:PermSize=128m" MEM_PERM_SIZE_32BIT="-XX:PermSize=128m" ... MEM_MAX_PERM_SIZE_64BIT="-XX:MaxPermSize=256m" MEM_MAX_PERM_SIZE_32BIT="-XX:MaxPermSize=256m" ???/???????(2):stopWebLogic??????shutdown.py????????? ??/???????????2????stopWebLogic??????????????shutdown.py??????????????????????????????ID/????????????????????????shutdown.py??????????????WebLogic Server 11g(10.3.3)?????????????ID????????????????????WebLogic Server 12c???????? ????????????? ?????????????/??? ???????????/?????????????? ???KernelMBean????UseConcurrentQueueForRequestManager?????????????????????????????[????]--[??????]-[??]?[?????·???????????????]??????????????????????????????????????????MBean???????????????????????????????????????????????????????????????????????????????????????????(???)? ??1???Windows?????????beasvc.exe????wlsvc.exe????????????????????????wlsvc _???????BEA????????????????(???)? ????WLST???????Jython???????????????????2.1??2.2.1????????(???11g??2.2.1???????)???????????????……?(???)? ???????WebLogic Server 12c???????????????????????/????????????????????????????????????????WebLogic Server?????????WebLogic Server????????????Facebook?????????WebLogic!??????????????

Read the article

???????????????

- by Todd Bao

?????????,???????????????????,??????????,???????,??????,?????????????: SYS@fmw//Scripts> @showfkparent hr employees---------------| ||DEPARTMENT_ID| +>-->HR.DEPARTMENTS.DEPARTMENT_ID| ||JOB_ID | +>-->HR.JOBS.JOB_ID| ||MANAGER_ID | +>-->HR.EMPLOYEES.EMPLOYEE_ID| |--------------- SYS@fmw//Scripts> @showfkparent sh sales------------| ||CHANNEL_ID| +>-->SH.CHANNELS.CHANNEL_ID| ||CUST_ID | +>-->SH.CUSTOMERS.CUST_ID| ||PROD_ID | +>-->SH.PRODUCTS.PROD_ID| ||PROMO_ID | +>-->SH.PROMOTIONS.PROMO_ID| ||TIME_ID | +>-->SH.TIMES.TIME_ID| |------------ ????????? ??? 30-08-2012 set echo offset verify offset serveroutput ondefine table_owner='&1'define table_name='&2'declare type info_typ is record (ct varchar2(30),cc varchar2(30),po varchar2(30),pt varchar2(30),pc varchar2(30)); type info_tab_typ is table of info_typ index by pls_integer; info_tab info_tab_typ; max_col_length number := 0;beginwith cons_child as (select owner,constraint_name,table_name, r_owner,r_constraint_name from dba_constraints where constraint_type='R' and owner=upper('&table_owner') and table_name=upper('&table_name')), cons_parent as (select owner,constraint_name,table_name from dba_constraints where (owner,constraint_name) in (select r_owner,r_constraint_name from cons_child))select child.table_name child_table_name, child.column_name child_column_name, parent.owner parent_owner, parent.table_name parent_table_name, parent.column_name parent_column_name bulk collect into info_tabfrom cons_child cc, cons_parent cp, dba_cons_columns parent, dba_cons_columns childwhere cc.owner = child.owner and cc.constraint_name = child.constraint_name and cp.owner = parent.owner and cp.constraint_name = parent.constraint_name and cc.r_owner = cp.owner and cc.r_constraint_name = cp.constraint_name and parent.position = child.positionorder by 2;if (info_tab is not null and info_tab.count >0) then for i in 1..info_tab.count loop if length(info_tab(i).cc) > max_col_length then max_col_length := length(info_tab(i).cc); end if; end loop; dbms_output.put_line(rpad('-',max_col_length+2,'-')); dbms_output.put_line(' '||'|'||rpad(' ',max_col_length,' ')||'|'); for i in 1..info_tab.count loop dbms_output.put('|'||rpad(info_tab(i).cc,max_col_length,' ')||'|'); dbms_output.put_line(' +>-->'||info_tab(i).po||'.'||info_tab(i).pt||'.'||info_tab(i).pc); dbms_output.put_line('|'||rpad(' ',max_col_length,' ')||'|'); end loop; dbms_output.put_line(rpad('-',max_col_length+2,'-'));else dbms_output.put_line('### No foreign key defined on this table! ###');end if;end;/undefine table_ownerundefine table_nameset serveroutput off Todd

Read the article

?11.2RAC??????????????

- by JaneZhang(???)

?????,???????????????,???dbca???????,???????????dbca,?????????11.2???????,???????,??dbca??????????????????,???????????????? ????11.2???????RACDB2???,?????RACDB1? ?????rac1,????rac2? ?11.2?,?????grid?????GI,??oracle????????,????????oracle?????? 1. ??????????????????,?????,???????????:audit_file_dest, background_dump_dest, user_dump_dest ?core_dump_dest????audit_file_dest=/u01/app/oracle/admin/RACDB/adump,?????????,?????????:ORA-09925: Unable to create audit trail fileLinux-x86_64 Error: 2: No such file or directoryAdditional information: 99252. ????????????????????????????:SQL> alter system set instance_number=2 scope=spfile sid='RACDB2';SQL> alter system set thread=2 scope=spfile sid='RACDB2';SQL> alter system set undo_tablespace='UNDOTBS2' scope=spfile sid='RACDB2';SQL> alter system set local_listener='(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=192.0.2.122)(PORT=1521))))' sid='RACDB2'; <=====192.0.2.122???2?VIP 3. ???????DB?$ORACLE_HOME/dbs/init<sid>.ora ?????DB?$ORACLE_HOME/dbs/init<sid>.ora,??????????????init<sid>.ora ????,????spfile???:=======================SPFILE='+DATA/racdb/spfileracdb.ora'??:[oracle@rac1 ~]$ scp $ORACLE_HOME/dbs/initRACDB1.ora rac2:$ORACLE_HOME/dbs/initRACDB2.ora <===????????24. ??????/etc/oratab,????????????:RACDB2:/u01/app/oracle/product/11.2.0/dbhome_1:N 5. ???????????: DB?$ORACLE_HOME/dbs/ora<sid>.pwd ????DB?$ORACLE_HOME/dbs/ora<sid>.pwd,??????????????:[oracle@rac1 dbs]$ scp $ORACLE_HOME/dbs/orapwRACDB1 rac2:$ORACLE_HOME/dbs/orapwRACDB2 <==?????26. ?????????????,????????UNDO TABLESPACE?(??????dbca?????,???????undo tablespace????,?????????)??:SQL>CREATE UNDO TABLESPACE "UNDOTBS2" DATAFILE '/dev/….' SIZE 4096M ;???????:SQL>CREATE UNDO TABLESPACE "UNDOTBS2" DATAFILE '+DATA' SIZE 4096M ;7. ?????????????,????????redo thread?redo log:??:SQL> alter database add logfile thread 2 group 3 ('/dev/...', '/dev/...') size 1024M, group 4 ('/dev/...','dev/...') size 1024M;???????:SQL> alter database add logfile thread 2 group 3 ('+DATA','+RECO') size 1024M, group 4 ('+DATA','+RECO') size 1024M;SQL> alter database enable thread 2; <==????thread8. ??????????,?????????????:[oracle@rac2 admin]$su - oracle[oracle@rac2 admin]$export ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1[oracle@rac2 admin]$export ORACLE_SID=RACDB2[oracle@rac2 admin]$ sqlplus / as sysdbaSQL> startup <==??????,???????2????????????9. ?????OCR???GI??,?????????????:$srvctl add instance -d <database name> -i <new instance name> -n <new node name>Example of srvctl add instance command:============================[oracle@rac2 ~]$ srvctl add instance -d racdb -i RACDB2 -n rac2 <==????????,????ps -ef|grep smon???[oracle@rac2 dbs]$ ps -ef|grep smonroot 3453 1 1 Jun12 ? 04:03:05 /u01/app/11.2.0/grid/bin/osysmond.bingrid 3727 1 0 Jun12 ? 00:00:19 asm_smon_+ASM2oracle 5343 4543 0 14:06 pts/1 00:00:00 grep smonoracle 28736 1 0 Jun25 ? 00:00:03 ora_smon_RACDB2 <========??????10. ???????:$su - grid[grid@rac2 ~]$ crsctl stat res -t...ora.racdb.db 1 ONLINE ONLINE rac1 Open 2 OFFLINE OFFLINE rac2????,??????offline,????????????sqlplus??????sqlplus??????,???srvctl??:[grid@rac2 ~]$ su - oraclePassword: [oracle@rac2 ~]$ sqlplus / as sysdbaSQL> shutdown immediate;Database closed.Database dismounted.ORACLE instance shut down.SQL> exit[oracle@rac2 ~]$ srvctl start instance -d racdb -i RACDB2[oracle@rac2 ~]$ su - gridPassword: [grid@rac2 ~]$ crsctl stat res -tora.racdb.db 1 ONLINE ONLINE rac1 Open 2 ONLINE ONLINE rac2 Open 11. ?????????:[oracle@rac2 ~]$ crsctl stat res ora.racdb.db -pNAME=ora.racdb.dbTYPE=ora.database.typeACL=owner:oracle:rwx,pgrp:oinstall:rwx,other::r--ACTION_FAILURE_TEMPLATE=ACTION_SCRIPT=ACTIVE_PLACEMENT=1AGENT_FILENAME=%CRS_HOME%/bin/oraagent%CRS_EXE_SUFFIX%AUTO_START=restoreCARDINALITY=2CHECK_INTERVAL=1CHECK_TIMEOUT=30CLUSTER_DATABASE=trueDATABASE_TYPE=RACDB_UNIQUE_NAME=RACDBDEFAULT_TEMPLATE=PROPERTY(RESOURCE_CLASS=database) PROPERTY(DB_UNIQUE_NAME= CONCAT(PARSE(%NAME%, ., 2), %USR_ORA_DOMAIN%, .)) ELEMENT(INSTANCE_NAME= %GEN_USR_ORA_INST_NAME%) ELEMENT(DATABASE_TYPE= %DATABASE_TYPE%)DEGREE=1DESCRIPTION=Oracle Database resourceENABLED=1FAILOVER_DELAY=0FAILURE_INTERVAL=60FAILURE_THRESHOLD=1GEN_AUDIT_FILE_DEST=/u01/app/oracle/admin/RACDB/adumpGEN_START_OPTIONS=GEN_START_OPTIONS@SERVERNAME(rac1)=openGEN_START_OPTIONS@SERVERNAME(rac2)=openGEN_USR_ORA_INST_NAME=GEN_USR_ORA_INST_NAME@SERVERNAME(rac1)=RACDB1HOSTING_MEMBERS=INSTANCE_FAILOVER=0LOAD=1LOGGING_LEVEL=1MANAGEMENT_POLICY=AUTOMATICNLS_LANG=NOT_RESTARTING_TEMPLATE=OFFLINE_CHECK_INTERVAL=0ONLINE_RELOCATION_TIMEOUT=0ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1ORACLE_HOME_OLD=PLACEMENT=restrictedPROFILE_CHANGE_TEMPLATE=RESTART_ATTEMPTS=2ROLE=PRIMARYSCRIPT_TIMEOUT=60SERVER_POOLS=ora.RACDBSPFILE=+DATA/RACDB/spfileRACDB.oraSTART_DEPENDENCIES=hard(ora.DATA.dg,ora.RECO.dg) weak(type:ora.listener.type,global:type:ora.scan_listener.type,uniform:ora.ons,global:ora.gns) pullup(ora.DATA.dg,ora.RECO.dg)START_TIMEOUT=600STATE_CHANGE_TEMPLATE=STOP_DEPENDENCIES=hard(intermediate:ora.asm,shutdown:ora.DATA.dg,shutdown:ora.RECO.dg)STOP_TIMEOUT=600TYPE_VERSION=3.2UPTIME_THRESHOLD=1hUSR_ORA_DB_NAME=RACDBUSR_ORA_DOMAIN=USR_ORA_ENV=USR_ORA_FLAGS=USR_ORA_INST_NAME=USR_ORA_INST_NAME@SERVERNAME(rac1)=RACDB1USR_ORA_INST_NAME@SERVERNAME(rac2)=RACDB2USR_ORA_OPEN_MODE=openUSR_ORA_OPI=falseUSR_ORA_STOP_MODE=immediateVERSION=11.2.0.3.0???11.2,?OCR???database??,??????,???????????database???????database???????,??????,???????????????ASM???????????? ?:dbca ???????????:????????oracle????dbca:su - oracledbca?? RAC database?? Instance Management?? add an instance???active rac database??????? ??undo?redo??

Read the article

User Input That Involves A ' ' Causes A Substring Out Of Range Error

- by Greenhouse Gases

Hi Stackoverflow people. You have already helped me quite a bit but near the end of writing this program I have somewhat of a bug. You see in order to read in city names with a space in from a text file I use a '/' that is then replaced by the program for a ' ' (and when the serializer runs the opposite happens for next time the program is run). The problem is when a user inputs a name too add, search for, or delete that contains a space, for instance 'New York' I get a Debug Assertion Error with a substring out of range expression. I have a feeling it's to do with my correctCase function, or setElementsNull that looks at the string until it experiences a null element in the array, however ' ' is not null so I'm not sure how to fix this and I'm going a bit insane. Any help would be much appreciated. Here is my code: // U08221.cpp : main project file. #include "stdafx.h" #include <_iostream> #include <_string> #include <_fstream> #include <_cmath> using namespace std; class locationNode { public: string nodeCityName; double nodeLati; double nodeLongi; locationNode* Next; locationNode(string nameOf, double lat, double lon) { this->nodeCityName = nameOf; this->nodeLati = lat; this->nodeLongi = lon; this->Next = NULL; } locationNode() // NULL constructor { } void swapProps(locationNode *node2) { locationNode place; place.nodeCityName = this->nodeCityName; place.nodeLati = this->nodeLati; place.nodeLongi = this->nodeLongi; this->nodeCityName = node2->nodeCityName; this->nodeLati = node2->nodeLati; this->nodeLongi = node2->nodeLongi; node2->nodeCityName = place.nodeCityName; node2->nodeLati = place.nodeLati; node2->nodeLongi = place.nodeLongi; } void modify(string name) { this->nodeCityName = name; } void modify(double latlon, int mod) { switch(mod) { case 2: this->nodeLati = latlon; break; case 3: this->nodeLongi = latlon; break; } } void correctCase() // Correct upper and lower case letters of input { int MAX_SIZE = 35; int firstLetVal = this->nodeCityName[0], letVal; int n = 1; // variable for name index from second letter onwards if((this->nodeCityName[0] >90) && (this->nodeCityName[0] < 123)) // First letter is lower case { firstLetVal = firstLetVal - 32; // Capitalise first letter this->nodeCityName[0] = firstLetVal; } while(this->nodeCityName[n] != NULL) { if((this->nodeCityName[n] >= 65) && (this->nodeCityName[n] <= 90)) { if(this->nodeCityName[n - 1] != 32) { letVal = this->nodeCityName[n] + 32; this->nodeCityName[n] = letVal; } } n++; } } }; Here is the main part of the program: // U08221.cpp : main project file. #include "stdafx.h" #include "Locations2.h" #include <_iostream> #include <_string> #include <_fstream> #include <_cmath> using namespace std; #define pi 3.14159265358979323846264338327950288 #define radius 6371 #define gig 1073741824 //size of a gigabyte in bytes int n = 0,x, locationCount = 0, MAX_SIZE = 35 , g = 0, i = 0, modKey = 0, xx; string cityNameInput, alter; char targetCity[35], skipKey = ' '; double lat1, lon1, lat2, lon2, dist, dummy, modVal, result; bool acceptedInput = false, match = false, nodeExists = false;// note: addLocation(), set to true to enable user input as opposed to txt file locationNode *temp, *temp2, *example, *seek, *bridge, *start_ptr = NULL; class Menu { int junction; public: /* Convert decimal degrees to radians */ public: void setElementsNull(char cityParam[]) { int y=0; while(cityParam[y] != NULL) { y++; } while(y < MAX_SIZE) { cityParam[y] = NULL; y++; } } void correctCase(string name) // Correct upper and lower case letters of input { int MAX_SIZE = 35; int firstLetVal = name[0], letVal; int n = 1; // variable for name index from second letter onwards if((name[0] >90) && (name[0] < 123)) // First letter is lower case { firstLetVal = firstLetVal - 32; // Capitalise first letter name[0] = firstLetVal; } while(name[n] != NULL) { if((name[n] >= 65) && (name[n] <= 90)) { letVal = name[n] + 32; name[n] = letVal; } n++; } for(n = 0; targetCity[n] != NULL; n++) { targetCity[n] = name[n]; } } bool nodeExistTest(char targetCity[]) // see if entry is present in the database { match = false; seek = start_ptr; int letters = 0, letters2 = 0, x = 0, y = 0; while(targetCity[y] != NULL) { letters2++; y++; } while(x <= locationCount) // locationCount is number of entries currently in list { y=0, letters = 0; while(seek->nodeCityName[y] != NULL) // count letters in the current name { letters++; y++; } if(letters == letters2) // same amount of letters in the name { y = 0; while(y <= letters) // compare each letter against one another { if(targetCity[y] == seek->nodeCityName[y]) { match = true; y++; } else { match = false; y = letters + 1; // no match, terminate comparison } } } if(match) { x = locationCount + 1; //found match so terminate loop } else{ if(seek->Next != NULL) { bridge = seek; seek = seek->Next; x++; } else { x = locationCount + 1; // end of list so terminate loop } } } return match; } double deg2rad(double deg) { return (deg * pi / 180); } /* Convert radians to decimal degrees */ double rad2deg(double rad) { return (rad * 180 / pi); } /* Do the calculation */ double distance(double lat1, double lon1, double lat2, double lon2, double dist) { dist = sin(deg2rad(lat1)) * sin(deg2rad(lat2)) + cos(deg2rad(lat1)) * cos(deg2rad(lat2)) * cos(deg2rad(lon1 - lon2)); dist = acos(dist); dist = rad2deg(dist); dist = (radius * pi * dist) / 180; return dist; } void serialise() { // Serialize to format that can be written to text file fstream outfile; outfile.open("locations.txt",ios::out); temp = start_ptr; do { for(xx = 0; temp->nodeCityName[xx] != NULL; xx++) { if(temp->nodeCityName[xx] == 32) { temp->nodeCityName[xx] = 47; } } outfile << endl << temp->nodeCityName<< " "; outfile<<temp->nodeLati<< " "; outfile<<temp->nodeLongi; temp = temp->Next; }while(temp != NULL); outfile.close(); } void sortList() // do this { int changes = 1; locationNode *node1, *node2; while(changes > 0) // while changes are still being made to the list execute { node1 = start_ptr; node2 = node1->Next; changes = 0; do { xx = 1; if(node1->nodeCityName[0] > node2->nodeCityName[0]) //compare first letter of name with next in list { node1->swapProps(node2); // should come after the next in the list changes++; } else if(node1->nodeCityName[0] == node2->nodeCityName[0]) // if same first letter { while(node1->nodeCityName[xx] == node2->nodeCityName[xx]) // check next letter of name { if((node1->nodeCityName[xx + 1] != NULL) && (node2->nodeCityName[xx + 1] != NULL)) // check next letter until not the same { xx++; } else break; } if(node1->nodeCityName[xx] > node2->nodeCityName[xx]) { node1->swapProps(node2); // should come after the next in the list changes++; } } node1 = node2; node2 = node2->Next; // move to next pair in list } while(node2 != NULL); } } void initialise() { cout << "Populating List..."; ifstream inputFile; inputFile.open ("locations.txt", ios::in); char inputName[35] = " "; double inputLati = 0, inputLongi = 0; //temp = new locationNode(inputName, inputLati, inputLongi); do { inputFile.get(inputName, 35, ' '); inputFile >> inputLati; inputFile >> inputLongi; if(inputName[0] == 10 || 13) //remove linefeed from input { for(int i = 0; inputName[i] != NULL; i++) { inputName[i] = inputName[i + 1]; } } for(xx = 0; inputName[xx] != NULL; xx++) { if(inputName[xx] == 47) // if it is a '/' { inputName[xx] = 32; // replace it for a space } } temp = new locationNode(inputName, inputLati, inputLongi); if(start_ptr == NULL){ // if list is currently empty, start_ptr will point to this node start_ptr = temp; } else { temp2 = start_ptr; // We know this is not NULL - list not empty! while (temp2->Next != NULL) { temp2 = temp2->Next; // Move to next link in chain until reach end of list } temp2->Next = temp; } ++locationCount; // increment counter for number of records in list } while(!inputFile.eof()); cout << "Successful!" << endl << "List contains: " << locationCount << " entries" << endl; inputFile.close(); cout << endl << "*******************************************************************" << endl << "DISTANCE CALCULATOR v2.0\tAuthors: Darius Hodaei, Joe Clifton" << endl; } void menuInput() { char menuChoice = ' '; while(menuChoice != 'Q') { // Menu if(skipKey != 'X') // This is set by case 'S' below if a searched term does not exist but wants to be added { cout << endl << "*******************************************************************" << endl; cout << "Please enter a choice for the menu..." << endl << endl; cout << "(P) To print out the list" << endl << "(O) To order the list alphabetically" << endl << "(A) To add a location" << endl << "(D) To delete a record" << endl << "(C) To calculate distance between two points" << endl << "(S) To search for a location in the list" << endl << "(M) To check memory usage" << endl << "(U) To update a record" << endl << "(Q) To quit" << endl; cout << endl << "*******************************************************************" << endl; cin >> menuChoice; if(menuChoice >= 97) { menuChoice = menuChoice - 32; // Turn the lower case letter into an upper case letter } } skipKey = ' '; //Reset skipKey so that it does not skip the menu switch(menuChoice) { case 'P': temp = start_ptr; // set temp to the start of the list do { if (temp == NULL) { cout << "You have reached the end of the database" << endl; } else { // Display details for what temp points to at that stage cout << "Location : " << temp->nodeCityName << endl; cout << "Latitude : " << temp->nodeLati << endl; cout << "Longitude : " << temp->nodeLongi << endl; cout << endl; // Move on to next locationNode if one exists temp = temp->Next; } } while (temp != NULL); break; case 'O': { sortList(); // pass by reference??? cout << "List reordered alphabetically" << endl; } break; case 'A': char cityName[35]; double lati, longi; cout << endl << "Enter the name of the location: "; cin >> cityName; for(xx = 0; cityName[xx] != NULL; xx++) { if(cityName[xx] == 47) // if it is a '/' { cityName[xx] = 32; // replace it for a space } } if(!nodeExistTest(cityName)) { cout << endl << "Please enter the latitude value for this location: "; cin >> lati; cout << endl << "Please enter the longitude value for this location: "; cin >> longi; cout << endl; temp = new locationNode(cityName, lati, longi); temp->correctCase(); //start_ptr allignment if(start_ptr == NULL){ // if list is currently empty, start_ptr will point to this node start_ptr = temp; } else { temp2 = start_ptr; // We know this is not NULL - list not empty! while (temp2->Next != NULL) { temp2 = temp2->Next; // Move to next link in chain until reach end of list } temp2->Next = temp; } ++locationCount; // increment counter for number of records in list cout << "Location sucessfully added to the database! There are " << locationCount << " location(s) stored" << endl; } else { cout << "Node is already present in the list and so cannot be added again" << endl; } break; case 'D': { junction = 0; locationNode *place; cout << "Enter the name of the city you wish to remove" << endl; cin >> targetCity; setElementsNull(targetCity); correctCase(targetCity); for(xx = 0; targetCity[xx] != NULL; xx++) { if(targetCity[xx] == 47) { targetCity[xx] = 32; } } if(nodeExistTest(targetCity)) //if this node does exist { if(seek == start_ptr) // if it is the first in the list { junction = 1; } if(seek->Next == NULL) // if it is last in the list { junction = 2; } switch(junction) // will alter list accordingly dependant on where the searched for link is { case 1: start_ptr = start_ptr->Next; delete seek; --locationCount; break; case 2: place = seek; seek = bridge; seek->Next = NULL; delete place; --locationCount; break; default: bridge->Next = seek->Next; delete seek; --locationCount; break; } cout << endl << "Link deleted. There are now " << locationCount << " locations." << endl; } else { cout << "That entry does not currently exist" << endl << endl << endl; } } break; case 'C': { char city1[35], city2[35]; cout << "Enter the first city name" << endl; cin >> city1; setElementsNull(city1); correctCase(targetCity); if(nodeExistTest(city1)) { lat1 = seek->nodeLati; lon1 = seek->nodeLongi; cout << "Lati = " << seek->nodeLati << endl << "Longi = " << seek->nodeLongi << endl << endl; } cout << "Enter the second city name" << endl; cin >> city2; setElementsNull(city2); correctCase(targetCity); if(nodeExistTest(city2)) { lat2 = seek->nodeLati; lon2 = seek->nodeLongi; cout << "Lati = " << seek->nodeLati << endl << "Longi = " << seek->nodeLongi << endl << endl; } result = distance (lat1, lon1, lat2, lon2, dist); cout << "The distance between these two locations is " << result << " kilometres." << endl; } break; case 'S': { char choice; cout << "Enter search term..." << endl; cin >> targetCity; setElementsNull(targetCity); correctCase(targetCity); if(nodeExistTest(targetCity)) { cout << "Latitude: " << seek->nodeLati << endl << "Longitude: " << seek->nodeLongi << endl; } else { cout << "Sorry, that city is not currently present in the list." << endl << "Would you like to add this city now Y/N?" << endl; cin >> choice; /*while(choice != ('Y' || 'N')) { cout << "Please enter a valid choice..." << endl; cin >> choice; }*/ switch(choice) { case 'Y': skipKey = 'X'; menuChoice = 'A'; break; case 'N': break; default : cout << "Invalid choice" << endl; break; } } break; } case 'M': { cout << "Locations currently stored: " << locationCount << endl << "Memory used for this: " << (sizeof(start_ptr) * locationCount) << " bytes" << endl << endl << "You can store " << ((gig - (sizeof(start_ptr) * locationCount)) / sizeof(start_ptr)) << " more locations" << endl ; break; } case 'U': { cout << "Enter the name of the Location you would like to update: "; cin >> targetCity; setElementsNull(targetCity); correctCase(targetCity); if(nodeExistTest(targetCity)) { cout << "Select (1) to alter City Name, (2) to alter Longitude, (3) to alter Latitude" << endl; cin >> modKey; switch(modKey) { case 1: cout << "Enter the new name: "; cin >> alter; cout << endl; seek->modify(alter); break; case 2: cout << "Enter the new latitude: "; cin >> modVal; cout << endl; seek->modify(modVal, modKey); break; case 3: cout << "Enter the new longitude: "; cin >> modVal; cout << endl; seek->modify(modVal, modKey); break; default: break; } } else cout << "Location not found" << endl; break; } } } } }; int main(array<System::String ^> ^args) { Menu mm; //mm.initialise(); mm.menuInput(); mm.serialise(); }

Read the article

Delphi Editbox causing unexplainable errors...

- by NeoNMD

On a form I have 8 edit boxes that I do the exact same thing with. They are arranged in 2 sets of 4, one is Upper and the other is Lower. I kept getting errors clearing all the edit boxes so I went through clearing them 1 by 1 and found that 1 of the edit boxes just didnt work and when I tried to run the program and change that exit box it caused the debugger to jump to a point in the code with the database (even though the edit boxes had nothing to do with the database and they arent in a procedure or stack with a database in it) and say the program has access violation there. So I then removed all mention of that edit box and the code worked perfectly again, so I deleted that edit box, copied and pasted another edit box and left all values the same, then went through my code and copied the code from the other sections and simply renamed it for the new Edit box and it STILL causes an error even though it is entirely new. I cannot figure it out so I ask you all, what the hell? The editbox in question is "Edit1" unit DefinitionCoreV2; interface uses Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms, Dialogs, SQLiteTable3, StdCtrls; type TDefinitionFrm = class(TForm) GrpCompetition: TGroupBox; CmbCompSele: TComboBox; BtnCompetitionAdd: TButton; BtnCompetitionUpdate: TButton; BtnCompetitionRevert: TButton; GrpCompetitionDetails: TGroupBox; LblCompetitionIDTitle: TLabel; EdtCompID: TEdit; LblCompetitionDescriptionTitle: TLabel; EdtCompDesc: TEdit; LblCompetitionNotesTitle: TLabel; EdtCompNote: TEdit; LblCompetitionLocationTitle: TLabel; EdtCompLoca: TEdit; BtnCompetitionDelete: TButton; GrpSection: TGroupBox; LblSectionID: TLabel; LblGender: TLabel; LblAge: TLabel; LblLevel: TLabel; LblWeight: TLabel; LblType: TLabel; LblHeight: TLabel; LblCompetitionID: TLabel; BtnSectionAdd: TButton; EdtSectionID: TEdit; CmbGender: TComboBox; BtnSectionUpdate: TButton; BtnSectionRevert: TButton; CmbAgeRange: TComboBox; CmbLevelRange: TComboBox; CmbType: TComboBox; CmbWeightRange: TComboBox; CmbHeightRange: TComboBox; EdtSectCompetitionID: TEdit; BtnSectionDelete: TButton; GrpSectionDetails: TGroupBox; EdtLowerAge: TEdit; EdtLowerWeight: TEdit; EdtLowerHeight: TEdit; EdtUpperAge: TEdit; EdtUpperLevel: TEdit; EdtUpperWeight: TEdit; EdtUpperHeight: TEdit; LblAgeRule: TLabel; LblLevelRule: TLabel; LblWeightRule: TLabel; LblHeightRule: TLabel; LblCompetitionSelect: TLabel; LblSectionSelect: TLabel; CmbSectSele: TComboBox; Edit1: TEdit; procedure FormCreate(Sender: TObject); procedure BtnCompetitionAddClick(Sender: TObject); procedure CmbCompSeleChange(Sender: TObject); procedure BtnCompetitionUpdateClick(Sender: TObject); procedure BtnCompetitionRevertClick(Sender: TObject); procedure BtnCompetitionDeleteClick(Sender: TObject); procedure CmbSectSeleChange(Sender: TObject); procedure BtnSectionAddClick(Sender: TObject); procedure BtnSectionUpdateClick(Sender: TObject); procedure BtnSectionRevertClick(Sender: TObject); procedure BtnSectionDeleteClick(Sender: TObject); procedure CmbAgeRangeChange(Sender: TObject); procedure CmbLevelRangeChange(Sender: TObject); procedure CmbWeightRangeChange(Sender: TObject); procedure CmbHeightRangeChange(Sender: TObject); private procedure UpdateCmbCompSele; procedure AddComp; procedure RevertComp; procedure AddSect; procedure RevertSect; procedure UpdateCmbSectSele; procedure ClearSect; { Private declarations } public { Public declarations } end; var DefinitionFrm: TDefinitionFrm; implementation {$R *.dfm} procedure TDefinitionFrm.UpdateCmbCompSele; var slDBpath: string; sldb : TSQLiteDatabase; sltb : TSQLiteTable; sCompTitle : string; bNext : boolean; begin slDBPath := ExtractFilepath(application.exename)+ 'Competitions.db'; if not FileExists(slDBPath) then begin MessageDlg('Competitions.db does not exist.',mtInformation,[mbOK],0); exit; end; sldb := TSQLiteDatabase.Create(slDBPath); try sltb := slDb.GetTable('SELECT * FROM CompetitionTable'); try CmbCompSele.Items.Clear; Repeat begin sCompTitle:=sltb.FieldAsString(sltb.FieldIndex['CompetitionID'])+':'+sltb.FieldAsString(sltb.FieldIndex['Description']); CmbCompSele.Items.Add(sCompTitle); bNext := sltb.Next; end; Until sltb.EOF; finally sltb.Free; end; finally sldb.Free; end; end; procedure TDefinitionFrm.UpdateCmbSectSele; var slDBpath: string; sldb : TSQLiteDatabase; sltb : TSQLiteTable; sSQL : string; sSectTitle : string; bNext : boolean; bLast : boolean; begin slDBPath := ExtractFilepath(application.exename)+ 'Competitions.db'; if not FileExists(slDBPath) then begin MessageDlg('Competitions.db does not exist.',mtInformation,[mbOK],0); exit; end; sldb := TSQLiteDatabase.Create(slDBPath); try sltb := slDb.GetTable('SELECT * FROM SectionTable WHERE CompetitionID = '+EdtCompID.text); If sltb.RowCount =0 then begin sltb := slDb.GetTable('SELECT * FROM SectionTable'); bLast:= sltb.MoveLast; sSQL := 'INSERT INTO SectionTable(SectionID,CompetitionID,Gender,Type) VALUES ('+IntToStr(sltb.FieldAsInteger(sltb.FieldIndex['SectionID'])+1)+','+EdtCompID.text+',1,1)'; sldb.ExecSQL(sSQL); sltb := slDb.GetTable('SELECT * FROM SectionTable WHERE CompetitionID = '+EdtCompID.text); end; try CmbSectSele.Items.Clear; Repeat begin sSectTitle:=sltb.FieldAsString(sltb.FieldIndex['SectionID'])+':'+sltb.FieldAsString(sltb.FieldIndex['Type'])+':'+sltb.FieldAsString(sltb.FieldIndex['Gender'])+':'+sltb.FieldAsString(sltb.FieldIndex['Age'])+':'+sltb.FieldAsString(sltb.FieldIndex['Level'])+':'+sltb.FieldAsString(sltb.FieldIndex['Weight'])+':'+sltb.FieldAsString(sltb.FieldIndex['Height']); CmbSectSele.Items.Add(sSectTitle); //CmbType.Items.Strings[sltb.FieldAsInteger(sltb.FieldIndex['Type'])] Works but has logic errors bNext := sltb.Next; end; Until sltb.EOF; finally sltb.Free; end; finally sldb.Free; end; end; procedure TDefinitionFrm.AddComp; var slDBpath: string; sSQL : string; sldb : TSQLiteDatabase; sltb : TSQLiteTable; bLast : boolean; begin slDBPath := ExtractFilepath(application.exename)+ 'Competitions.db'; if not FileExists(slDBPath) then begin MessageDlg('Competitions.db does not exist.',mtInformation,[mbOK],0); exit; end; sldb := TSQLiteDatabase.Create(slDBPath); try sltb := slDb.GetTable('SELECT * FROM CompetitionTable'); try bLast:= sltb.MoveLast; sSQL := 'INSERT INTO CompetitionTable(CompetitionID,Description) VALUES ('+IntToStr(sltb.FieldAsInteger(sltb.FieldIndex['CompetitionID'])+1)+',"New Competition")'; sldb.ExecSQL(sSQL); finally sltb.Free; end; finally sldb.Free; end; UpdateCmbCompSele; end; procedure TDefinitionFrm.AddSect; var slDBpath: string; sSQL : string; sldb : TSQLiteDatabase; sltb : TSQLiteTable; bLast : boolean; begin slDBPath := ExtractFilepath(application.exename)+ 'Competitions.db'; if not FileExists(slDBPath) then begin MessageDlg('Competitions.db does not exist.',mtInformation,[mbOK],0); exit; end; sldb := TSQLiteDatabase.Create(slDBPath); try sltb := slDb.GetTable('SELECT * FROM SectionTable'); try bLast:= sltb.MoveLast; sSQL := 'INSERT INTO SectionTable(SectionID,CompetitionID,Gender,Type) VALUES ('+IntToStr(sltb.FieldAsInteger(sltb.FieldIndex['SectionID'])+1)+','+EdtCompID.text+',1,1)'; sldb.ExecSQL(sSQL); finally sltb.Free; end; finally sldb.Free; end; UpdateCmbSectSele; end; procedure TDefinitionFrm.RevertComp; var slDBpath: string; sldb : TSQLiteDatabase; sltb : TSQLiteTable; iID : integer; begin slDBPath := ExtractFilepath(application.exename)+ 'Competitions.db'; if not FileExists(slDBPath) then begin MessageDlg('Competitions.db does not exist.',mtInformation,[mbOK],0); exit; end; sldb := TSQLiteDatabase.Create(slDBPath); try If CmbCompSele.Text <> '' then begin iID := StrToInt(Copy(CmbCompSele.Text,0,Pos(':',CmbCompSele.Text)-1)); sltb := slDb.GetTable('SELECT * FROM CompetitionTable WHERE CompetitionID='+IntToStr(iID))//ItemIndex starts at 0, CompID at 1 end else sltb := slDb.GetTable('SELECT * FROM CompetitionTable WHERE CompetitionID=1'); try EdtCompID.Text:=sltb.FieldAsString(sltb.FieldIndex['CompetitionID']); EdtCompLoca.Text:=sltb.FieldAsString(sltb.FieldIndex['Location']); EdtCompDesc.Text:=sltb.FieldAsString(sltb.FieldIndex['Description']); EdtCompNote.Text:=sltb.FieldAsString(sltb.FieldIndex['Notes']); finally sltb.Free; end; finally sldb.Free; end; end; procedure TDefinitionFrm.RevertSect; var slDBpath: string; sldb : TSQLiteDatabase; sltb : TSQLiteTable; iID : integer; sTemp : string; begin slDBPath := ExtractFilepath(application.exename)+ 'Competitions.db'; if not FileExists(slDBPath) then begin MessageDlg('Competitions.db does not exist.',mtInformation,[mbOK],0); exit; end; sldb := TSQLiteDatabase.Create(slDBPath); try If CmbCompSele.Text <> '' then begin iID := StrToInt(Copy(CmbSectSele.Text,0,Pos(':',CmbSectSele.Text)-1)); sltb := slDb.GetTable('SELECT * FROM SectionTable WHERE SectionID='+IntToStr(iID));//ItemIndex starts at 0, CompID at 1 end else sltb := slDb.GetTable('SELECT * FROM SectionTable WHERE CompetitionID='+EdtCompID.Text); try EdtSectionID.Text:=sltb.FieldAsString(sltb.FieldIndex['SectionID']); EdtSectCompetitionID.Text:=sltb.FieldAsString(sltb.FieldIndex['CompetitionID']); Case sltb.FieldAsInteger(sltb.FieldIndex['Type']) of 1 : CmbType.ItemIndex:=0; 2 : CmbType.ItemIndex:=0; 3 : CmbType.ItemIndex:=1; 4 : CmbType.ItemIndex:=1; end; Case sltb.FieldAsInteger(sltb.FieldIndex['Gender']) of 1 : CmbGender.ItemIndex:=0; 2 : CmbGender.ItemIndex:=1; 3 : CmbGender.ItemIndex:=2; end; sTemp := sltb.FieldAsString(sltb.FieldIndex['Age']); if sTemp <> '' then begin //Decode end else begin LblAgeRule.Hide; EdtLowerAge.Text :=''; EdtLowerAge.Hide; EdtUpperAge.Text :=''; EdtUpperAge.Hide; end; sTemp := sltb.FieldAsString(sltb.FieldIndex['Level']); if sTemp <> '' then begin //Decode end else begin LblLevelRule.Hide; Edit1.Text :=''; Edit1.Hide; EdtUpperLevel.Text :=''; EdtUpperLevel.Hide; end; sTemp := sltb.FieldAsString(sltb.FieldIndex['Weight']); if sTemp <> '' then begin //Decode end else begin LblWeightRule.Hide; EdtLowerWeight.Text :=''; EdtLowerWeight.Hide; EdtUpperWeight.Text :=''; EdtUpperWeight.Hide; end; sTemp := sltb.FieldAsString(sltb.FieldIndex['Height']); if sTemp <> '' then begin //Decode end else begin LblHeightRule.Hide; EdtLowerHeight.Text :=''; EdtLowerHeight.Hide; EdtUpperHeight.Text :=''; EdtUpperHeight.Hide; end; finally sltb.Free; end; finally sldb.Free; end; end; procedure TDefinitionFrm.BtnCompetitionAddClick(Sender: TObject); begin AddComp end; procedure TDefinitionFrm.ClearSect; begin CmbSectSele.Clear; EdtSectionID.Text:=''; EdtSectCompetitionID.Text:=''; CmbType.Clear; CmbGender.Clear; CmbAgeRange.Clear; EdtLowerAge.Text:=''; EdtUpperAge.Text:=''; CmbLevelRange.Clear; Edit1.Text:=''; EdtUpperLevel.Text:=''; CmbWeightRange.Clear; EdtLowerWeight.Text:=''; EdtUpperWeight.Text:=''; CmbHeightRange.Clear; EdtLowerHeight.Text:=''; EdtUpperHeight.Text:=''; end; procedure TDefinitionFrm.CmbCompSeleChange(Sender: TObject); begin If CmbCompSele.ItemIndex <> -1 then begin RevertComp; GrpSection.Enabled:=True; CmbSectSele.Clear; ClearSect; UpdateCmbSectSele; end; end; procedure TDefinitionFrm.BtnCompetitionUpdateClick(Sender: TObject); var slDBpath: string; sSQL : string; sldb : TSQLiteDatabase; begin slDBPath := ExtractFilepath(application.exename)+ 'Competitions.db'; if not FileExists(slDBPath) then begin MessageDlg('Competitions.db does not exist.',mtInformation,[mbOK],0); exit; end; sldb := TSQLiteDatabase.Create(slDBPath); try sSQL:= 'UPDATE CompetitionTable SET Description="'+EdtCompDesc.Text+'",Location="'+EdtCompLoca.Text+'",Notes="'+EdtCompNote.Text+'" WHERE CompetitionID ="'+EdtCompID.Text+'";'; sldb.ExecSQL(sSQL); finally sldb.Free; end; end; procedure TDefinitionFrm.BtnCompetitionRevertClick(Sender: TObject); begin RevertComp; end; procedure TDefinitionFrm.BtnCompetitionDeleteClick(Sender: TObject); var slDBpath: string; sSQL : string; sldb : TSQLiteDatabase; iID : integer; begin If CmbCompSele.Text <> '' then begin If (CmbCompSele.Text[1] ='1') and (CmbCompSele.Text[2] =':') then begin MessageDlg('Deleting the last record is a very bad idea :/',mtInformation,[mbOK],0); end else begin slDBPath := ExtractFilepath(application.exename)+ 'Competitions.db'; if not FileExists(slDBPath) then begin MessageDlg('Competitions.db does not exist.',mtInformation,[mbOK],0); exit; end; sldb := TSQLiteDatabase.Create(slDBPath); try iID := StrToInt(Copy(CmbCompSele.Text,0,Pos(':',CmbCompSele.Text)-1)); sSQL:= 'DELETE FROM SectionTable WHERE CompetitionID='+IntToStr(iID)+';'; sldb.ExecSQL(sSQL); sSQL:= 'DELETE FROM CompetitionTable WHERE CompetitionID='+IntToStr(iID)+';'; sldb.ExecSQL(sSQL); finally sldb.Free; end; CmbCompSele.ItemIndex:=0; UpdateCmbCompSele; RevertComp; CmbCompSele.Text:='Select Competition'; end; end; end; procedure TDefinitionFrm.FormCreate(Sender: TObject); begin UpdateCmbCompSele; end; procedure TDefinitionFrm.CmbSectSeleChange(Sender: TObject); begin RevertSect; end; procedure TDefinitionFrm.BtnSectionAddClick(Sender: TObject); begin AddSect; end; procedure TDefinitionFrm.BtnSectionUpdateClick(Sender: TObject); //change fields values var slDBpath: string; sSQL : string; sldb : TSQLiteDatabase; iTypeCode : integer; iGenderCode : integer; sAgeStr, sLevelStr, sWeightStr, sHeightStr : string; begin slDBPath := ExtractFilepath(application.exename)+ 'Competitions.db'; if not FileExists(slDBPath) then begin MessageDlg('Competitions.db does not exist.',mtInformation,[mbOK],0); exit; end; sldb := TSQLiteDatabase.Create(slDBPath); try If CmbType.Text='Fighting' then iTypeCode := 1 else iTypeCode := 3; If CmbGender.Text='Male' then iGenderCode := 1 else if CmbGender.Text='Female' then iGenderCode := 2 else iGenderCode := 3; Case CmbAgeRange.ItemIndex of 0:sAgeStr := 'o-'+EdtLowerAge.Text; 1:sAgeStr := 'u-'+EdtLowerAge.Text; 2:sAgeStr := EdtLowerAge.Text+'-'+EdtUpperAge.Text; end; Case CmbLevelRange.ItemIndex of 0:sLevelStr := 'o-'+Edit1.Text; 1:sLevelStr := 'u-'+Edit1.Text; 2:sLevelStr := Edit1.Text+'-'+EdtUpperLevel.Text; end; Case CmbWeightRange.ItemIndex of 0:sWeightStr := 'o-'+EdtLowerWeight.Text; 1:sWeightStr := 'u-'+EdtLowerWeight.Text; 2:sWeightStr := EdtLowerWeight.Text+'-'+EdtUpperWeight.Text; end; Case CmbHeightRange.ItemIndex of 0:sHeightStr := 'o-'+EdtLowerHeight.Text; 1:sHeightStr := 'u-'+EdtLowerHeight.Text; 2:sHeightStr := EdtLowerHeight.Text+'-'+EdtUpperHeight.Text; end; sSQL:= 'UPDATE SectionTable SET Type="'+IntToStr(iTypeCode)+'",Gender="'+IntToStr(iGenderCode)+'" WHERE SectionID ="'+EdtSectionID.Text+'";'; sldb.ExecSQL(sSQL); finally sldb.Free; end; end; procedure TDefinitionFrm.BtnSectionRevertClick(Sender: TObject); begin RevertSect; end; procedure TDefinitionFrm.BtnSectionDeleteClick(Sender: TObject); var slDBpath: string; sSQL : string; sldb : TSQLiteDatabase; begin If CmbSectSele.Text[1] ='1' then begin MessageDlg('Deleting the last record is a very bad idea :/',mtInformation,[mbOK],0); end else begin slDBPath := ExtractFilepath(application.exename)+ 'Competitions.db'; if not FileExists(slDBPath) then begin MessageDlg('Competitions.db does not exist.',mtInformation,[mbOK],0); exit; end; sldb := TSQLiteDatabase.Create(slDBPath); try sSQL:= 'DELETE FROM SectionTable WHERE SectionID='+CmbSectSele.Text[1]+';'; sldb.ExecSQL(sSQL); finally sldb.Free; end; CmbSectSele.ItemIndex:=0; UpdateCmbSectSele; RevertSect; CmbSectSele.Text:='Select Competition'; end; end; procedure TDefinitionFrm.CmbAgeRangeChange(Sender: TObject); begin Case CmbAgeRange.ItemIndex of 0: begin EdtLowerAge.Show; LblAgeRule.Caption:='Over and including'; LblAgeRule.Show; EdtUpperAge.Hide; end; 1: begin EdtLowerAge.Show; LblAgeRule.Caption:='Under and including'; LblAgeRule.Show; EdtUpperAge.Hide; end; 2: begin EdtLowerAge.Show; LblAgeRule.Caption:='LblAgeRule'; LblAgeRule.Hide; EdtUpperAge.Show; end; end; end; procedure TDefinitionFrm.CmbLevelRangeChange(Sender: TObject); begin Case CmbLevelRange.ItemIndex of 0: begin Edit1.Show; LblLevelRule.Caption:='Over and including'; LblLevelRule.Show; EdtUpperLevel.Hide; end; 1: begin Edit1.Show; LblLevelRule.Caption:='Under and including'; LblLevelRule.Show; EdtUpperLevel.Hide; end; 2: begin Edit1.Show; LblLevelRule.Caption:='LblLevelRule'; LblLevelRule.Hide; EdtUpperLevel.Show; end; end; end; procedure TDefinitionFrm.CmbWeightRangeChange(Sender: TObject); begin Case CmbWeightRange.ItemIndex of 0: begin EdtLowerWeight.Show; LblWeightRule.Caption:='Over and including'; LblWeightRule.Show; EdtUpperWeight.Hide; end; 1: begin EdtLowerWeight.Show; LblWeightRule.Caption:='Under and including'; LblWeightRule.Show; EdtUpperWeight.Hide; end; 2: begin EdtLowerWeight.Show; LblWeightRule.Caption:='LblWeightRule'; LblWeightRule.Hide; EdtUpperWeight.Show; end; end; end; procedure TDefinitionFrm.CmbHeightRangeChange(Sender: TObject); begin Case CmbHeightRange.ItemIndex of 0: begin EdtLowerHeight.Show; LblHeightRule.Caption:='Over and including'; LblHeightRule.Show; EdtUpperHeight.Hide; end; 1: begin EdtLowerHeight.Show; LblHeightRule.Caption:='Under and including'; LblHeightRule.Show; EdtUpperHeight.Hide; end; 2: begin EdtLowerHeight.Show; LblHeightRule.Caption:='LblHeightRule'; LblHeightRule.Hide; EdtUpperHeight.Show; end; end; end; end.

Read the article

Content Box is a Little Off in IE9 ... How to Fix?

- by Kelsey Nealon

Hi there! I have a website at www.thetotempole.ca and when viewed in IE9... My websites content box (The green wooden backgrounded box with content inside) is moved slightly over to the left making a space between the actual container and the content box... Is there anyway I can fix this without harming any of the other browsers? Thanks! Screenshot: HTML: <!DOCTYPE html> <head> <title>The Totem Pole News - Movies</title>  <link rel="stylesheet" type="text/css" href="engine1/style.css" /> <script type="text/javascript" src="engine1/jquery.js"></script>  <script type="text/javascript"> var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-45342007-1']); _gaq.push(['_trackPageview']); (function() { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })(); </script> <meta charset="utf-8"> <meta name="description" content="A totem pole themed news website posting articles on news, music, movies, video games, and health."> <link href="thecss2.css" rel="stylesheet" type="text/css"> <link rel="icon" type="image/ico" href="images/favicon.ico"> <meta http-equiv="X-UA-Compatible" content="IE=8" /> </head> <body> <div id="container"> <div id="contentbox" align="Center"> <a href="index.html"><div id="banner" align="Center"> </div></a> <div id="navbar"> <p><a href="index.html"><img src="images/home.png" width="65" height="54" alt="picture of a house to relate to the home page (content)" style="position: absolute; left: 23px; top: 16px; width: 57px; height: 48px;"><span style="position: absolute; left: 24px; z-index:2; top: 71px; height: 23px;">Content</span></a> <a href="#"><img src="images/eagleicon.gif" width="73" height="39" alt="An Eagle icon for the News section of the Totem Pole" style="position: absolute; left: 111px; top: 28px;"><span style="position: absolute; z-index: 2; left: 127px; top: 72px;">News</span></a> <a href="#"><img src="images/owlicon.gif" width="81" height="61" alt="An Owl icon for the Music section of the totem pole" style="position: absolute; left: 210px; top: 11px;"><span style="position: absolute; z-index:2; left: 226px; top: 73px;"><strong>Music</strong></span></a><a href="movies.html"><img src="images/wolficon.gif" width="88" height="54" alt="A Wolf icon for the Movies section of the totem pole" style="position: absolute; left: 320px; top: 15px;"><span style="position: absolute; left: 336px; top: 72px; z-index:2;"><strong>Movies</strong></span></a> <a href="#"><img src="images/hareimage.gif" width="60" height="56" alt="A Hare icon for Video Game section of the Totem Pole" style="position: absolute; left: 441px; top: 13px;"><span style="position: absolute; z-index:2; left: 428px; top: 73px;"><strong>Video Games</strong></span></a> <a href="#"><img src="images/bearicon.gif" width="91" height="57" alt="A bear icon for the Health section of The Totem Pole" style="position: absolute; left: 551px; top: 13px;"><span style="position: absolute; left: 580px; top: 72px; z-index:2;">Health</span></a></p> </div>  <div id="navbar2"> <a href="#">About Us</a> <a href="#">Feedback</a> <a href="#">Subscribe</a> </div>  <div id="searchbar"> <form method="get" action="http://search.atomz.com/search/"> <input id="searchbox" size="13" name="sp_q" value="Search..." onFocus="if (this.value == 'Search...') {this.value=''}"> <input class="css_btn_class" type="submit" value="Search"> <input type="hidden" name="sp_a" value="sp1005092e"> <input type="hidden" name="sp_p" value="all"> <input type="hidden" name="sp_f" value="UTF-8"> </form> </div>  <div id="mywowslider"> <div id="wowslider-container1"> <div class="ws_images"> <ul> <li><img src="images/anchor.jpg" alt="Ron Burgundy" title="Ron Burgundy" id="wows1_0"/>Played by Will Ferrell</li> <li><img src="images/anchor2.jpg" alt="Brian Fantana" title="Brian Fantana" id="wows1_1"/>Played by Paul Rudd</li> <li><img src="images/anchor3.jpg" alt="Brick Tamland" title="Brick Tamland" id="wows1_2"/>Played by Steve Carrell</li> <li><img src="images/anchor4.jpg" alt="Champ Kind" title="Champ Kind" id="wows1_3"/>Played by David Koechner</li> </ul> </div> <div class="ws_bullets"><div> <a href="#" title="Ron Burgundy"><img src="images/anchor.jpg" alt="Ron Burgundy"/>1</a> <a href="#" title="Brian Fantana"><img src="images/anchor2.jpg" alt="Brian Fantana"/>2</a> <a href="#" title="Brick Tamland"><img src="images/anchor3.jpg" alt="Brick Tamland"/>3</a> <a href="#" title="Champ Kind"><img src="images/anchor4.jpg" alt="Champ Kind"/>4</a> </div> </div> <span class="wsl"><a href="http://wowslider.com"></a></span> <div class="ws_shadow"></div> </div> <script type="text/javascript" src="engine1/wowslider.js"></script> <script type="text/javascript" src="engine1/script.js"></script> </div>    <script type="text/javascript" src="//s7.addthis.com/js/300/addthis_widget.js#pubid=ra-5279b96309e7df24"></script> <script type="text/javascript"> addthis.layers({ 'theme' : 'transparent', 'share' : { 'position' : 'left', 'numPreferredServices' : 5 } }); </script>  <div id="sources"><p> Source(s): <a href="http://en.wikipedia.org/wiki/Anchorman_2:_The_Legend_Continues">wikipedia.com</a></p></div> <div id="infocontent"> <p align="left"><em><strong>       Anchorman 2: The Legend Continues</strong></em> is an upcoming American comedy film being released on December 20, 2013, also a sequel to the 2004 film <em>Anchorman: The Legend of Ron Burgandy</em>. On March 28, 2012, actor Will Ferrell officially announced the sequel dressed in character as Ron Burgundy on the late-night talk-show <em>Conan</em>. As with the original film, it is directed by Adam McKay, produced by Judd Apatow, stars Will Ferrell and is written by Adam McKay and Will Ferrell. Unlike the original film, which was distributed by DreamWorks Pictures, <em>The Legend Continues</em> will be distributed by Paramount Pictures.</p> <p align="left"><em><strong>      </strong></em>The movie now has a website at <a href="www.anchormanmovie.com">www.anchormanmovie.com</a> where a countdown for the release of this film can be seen. By the looks of these images, I think we can expect big things when the movie comes out this December. Enjoy the poster photos and trailers all posted below, and don't forget to submit your vote in the poll!</p> </div> <div id="trailer1"><iframe width="560" height="315" src="//www.youtube.com/embed/Elczv0ghqw0?rel=0" frameborder="0" allowfullscreen></iframe></div> <div id="trailer2"> <iframe width="560" height="315" src="//www.youtube.com/embed/mZ-JX-7B3uM?rel=0" frameborder="0" allowfullscreen></iframe> </div> <div id="poll"> <form method="post" action="http://poll.pollcode.com/763294"><table style="border: black 1px solid;" border="1" width="175" bgcolor="EEEEEE" cellspacing="2" cellpadding="0"><tr><td colspan="2" height="10"><font face="Verdana" size="2" color="000000"><b>What Rating Do You Think This Will Recieve</b></font></td></tr><tr><td width="5"><input type="radio" name="answer" value="1" id="763294answer1"></td><td> <font face="Verdana" size="2" color="000000"><label for="763294answer1">10</label></font></td></tr><tr><td width="5"><input type="radio" name="answer" value="2" id="763294answer2"></td><td> <font face="Verdana" size="2" color="000000"><label for="763294answer2">9</label></font></td></tr><tr><td width="5"><input type="radio" name="answer" value="3" id="763294answer3"></td><td> <font face="Verdana" size="2" color="000000"><label for="763294answer3">8</label></font></td></tr><tr><td width="5"><input type="radio" name="answer" value="4" id="763294answer4"></td><td> <font face="Verdana" size="2" color="000000"><label for="763294answer4">7</label></font></td></tr><tr><td width="5"><input type="radio" name="answer" value="5" id="763294answer5"></td><td> <font face="Verdana" size="2" color="000000"><label for="763294answer5">6</label></font></td></tr><tr><td width="5"><input type="radio" name="answer" value="6" id="763294answer6"></td><td> <font face="Verdana" size="2" color="000000"><label for="763294answer6">5</label></font></td></tr><tr><td width="5"><input type="radio" name="answer" value="7" id="763294answer7"></td><td> <font face="Verdana" size="2" color="000000"><label for="763294answer7">4</label></font></td></tr><tr><td width="5"><input type="radio" name="answer" value="8" id="763294answer8"></td><td> <font face="Verdana" size="2" color="000000"><label for="763294answer8">3</label></font></td></tr><tr><td width="5"><input type="radio" name="answer" value="9" id="763294answer9"></td><td> <font face="Verdana" size="2" color="000000"><label for="763294answer9">2</label></font></td></tr><tr><td width="5"><input type="radio" name="answer" value="10" id="763294answer10"></td><td> <font face="Verdana" size="2" color="000000"><label for="763294answer10">1</label></font></td></tr><tr><td colspan="2" height="10"><center><input type="submit" value=" Vote ">  <input title="Clicking this will send you to a new page" type="submit" name="view" value=" View "></center></td></tr><tr><td colspan="2" align="right"><font face="Verdana" height="5" size="1" color="000000"></font></td></tr></table></form></div> <span style="position: absolute; left: 0px; top: 225px; width: 1000px; border-bottom: 2px black double; height: 58px;"> <h1 style="font-weight: normal; font-size:28px"><em>Anchorman 2 Arrives Soon</em></h1></span> <div id="contentbox2"></div>  <center><div id="footer"><a href="#">Sitemap</a> <a href="#">About Us</a> <a href="#">Feedback</a></div></center> <div id="disqus"><div id="disqus_thread"></div> <script type="text/javascript"> /* * * CONFIGURATION VARIABLES: EDIT BEFORE PASTING INTO YOUR WEBPAGE * * */ var disqus_shortname = 'thetotempoleanchorman2'; // required: replace example with your forum shortname /* * * DON'T EDIT BELOW THIS LINE * * */ (function() { var dsq = document.createElement('script'); dsq.type = 'text/javascript'; dsq.async = true; dsq.src = '//' + disqus_shortname + '.disqus.com/embed.js'; (document.getElementsByTagName('head')[0] || document.getElementsByTagName('body')[0]).appendChild(dsq); })(); </script> <noscript>Please enable JavaScript to view the <a href="http://disqus.com/?ref_noscript">comments powered by Disqus.</a></noscript> <a href="http://disqus.com" class="dsq-brlink">comments powered by <span class="logo-disqus">Disqus</span></a></div> </div>  </div> </body> </html> CSS: html { background: url(images/pine.jpg) no-repeat center center fixed; -webkit-background-size: cover; -moz-background-size: cover; -o-background-size: cover; background-size: cover; filter: progid:DXImageTransform.Microsoft.AlphaImageLoader(src='images/pine.jpg', sizingMethod='scale'); -ms-filter: "progid:DXImageTransform.Microsoft.AlphaImageLoader(src='images/pine.jpg', sizingMethod='scale')"; } body { margin-bottom:0px; font-family: Verdana, Geneva, sans-serif; } a { outline : none; border: none; } a:hover { color: #0FC; } #container { width: 1000px; height:1924px; position:relative; margin-right: auto; margin-left: auto; z-index:1; margin-bottom: 50px; } #facebook { position:fixed; right:100px; z-index:15; } #twitter { position:fixed; z-index:16; right:120px; } #google { position:fixed; top:7px; right: 135px; } #socialmediaplugins { text-align: right; position: fixed; background: rgb(125,126,125); /* Old browsers */ background: -moz-linear-gradient(top, rgba(125,126,125,1) 0%, rgba(247,247,247,1) 100%); /* FF3.6+ */ background: -webkit-gradient(linear, left top, left bottom, color-stop(0%,rgba(125,126,125,1)), color-stop(100%,rgba(247,247,247,1))); /* Chrome,Safari4+ */ background: -webkit-linear-gradient(top, rgba(125,126,125,1) 0%,rgba(247,247,247,1) 100%); /* Chrome10+,Safari5.1+ */ background: -o-linear-gradient(top, rgba(125,126,125,1) 0%,rgba(247,247,247,1) 100%); /* Opera 11.10+ */ background: -ms-linear-gradient(top, rgba(125,126,125,1) 0%,rgba(247,247,247,1) 100%); /* IE10+ */ background: linear-gradient(to bottom, rgba(125,126,125,1) 0%,rgba(247,247,247,1) 100%); /* W3C */ filter: progid:DXImageTransform.Microsoft.gradient( startColorstr='#7d7e7d', endColorstr='#f7f7f7',GradientType=0 ); /* IE6-9 */ margin: 0px; top: 0px; left: 0px; right: 0px; z-index:14; } #searchbox { background-color:#01bff6; border-radius:4px; } #searchbox:hover { background-color:#76b618; border-radius:4px; } #searchbox:active { background-color:#01bff6; border-radius:4px; } #contentbox { background-color:black; background-image:url(images/wooden.jpg); width: 1000px; margin-bottom:50px; height: 1924px; box-shadow:2px 2px 10px 10px #060606; -webkit-box-shadow:2px 2px 10px 10px #060606; -moz-box-shadow:2px 2px 10px 10px #060606; /* For IE<9 */ filter: progid:DXImageTransform.Microsoft.Shadow(color=#060606,direction=0,strength=5), progid:DXImageTransform.Microsoft.Shadow(color=#060606,direction=45,strength=2), progid:DXImageTransform.Microsoft.Shadow(color=#060606,direction=90,strength=5), progid:DXImageTransform.Microsoft.Shadow(color=#060606,direction=135,strength=5), progid:DXImageTransform.Microsoft.Shadow(color=#060606,direction=180,strength=10), progid:DXImageTransform.Microsoft.Shadow(color=#060606,direction=225,strength=5), progid:DXImageTransform.Microsoft.Shadow(color=#060606,direction=270,strength=5), progid:DXImageTransform.Microsoft.Shadow(color=#060606,direction=315,strength=2); } #contentbox2 { background-image:url(images/woodenmovies.jpg); top:299px; width: 1000px; margin-bottom:50px; height: 1625px; position: absolute; } #banner { background-image:url(images/totempolebanner.gif); position:absolute; top:25px; width:768px; height:120px; left:116px; } #navbar { float: left; position: absolute; top: 146px; left: 76px; width: 844px; height: 158px; font-weight:bold; } #navbar a { color:#0C6; font-size: 13px; } #navbar a:hover { color:#0F9; font-size: 13px; } #navbar2 a:hover { color:#0F9; } #navbar2 a{ text-decoration:none; color:#0C6; } #navbar2 { position: absolute; top: 4px; left: 766px; width: 273px; height: 24px; font-size: 11px; } #searchbar { position: absolute; top: 23px; left: 885px; width: 118px; height: 69px; } .css_btn_class { font-size:9px; position: relative; top:0px; right:4px; width:90px; height:25px; font-family:Verdana; font-weight:normal; -moz-border-radius:7px; -webkit-border-radius:7px; border-radius:7px; border:1px solid #35d914; padding:7px 24px; text-decoration:none; background:-webkit-gradient( linear, left top, left bottom, color-stop(5%, #ff9d00), color-stop(100%, #ffe711) ); background:-moz-linear-gradient( center top, #ff9d00 5%, #ffe711 100% ); background:-ms-linear-gradient( top, #ff9d00 5%, #ffe711 100% ); background-color:#ff9d00; color:#ff0000; display:inline-block; text-shadow:0px 0px 1px #117cff; -webkit-box-shadow: 0px 0px 0px 0px #117cff; -moz-box-shadow: 0px 0px 0px 0px #117cff; box-shadow: 0px 0px 0px 0px #117cff; background-image: url(images/unnamed.gif); background-repeat:no-repeat; background-position:right; }.css_btn_class:hover { width:90px; background:-webkit-gradient( linear, left top, left bottom, color-stop(5%, #ffe711), color-stop(100%, #ff9d00) ); background:-moz-linear-gradient( center top, #ffe711 5%, #ff9d00 100% ); background:-ms-linear-gradient( top, #ffe711 5%, #ff9d00 100% ); background-color:#ffe711; background-image: url(images/unnamed.gif); background-repeat:no-repeat; background-position:right; }.css_btn_class:active { position:relative; width:90px; top:1px; background-image: url(images/unnamed.gif); background-repeat:no-repeat; background-position:right; } /* This css button was generated by css-button-generator.com */ img {border:none;} #eagle { position:relative; right: 144px; top:299px; } #owl { top:624px; position:absolute; left:0px; } #wolf { top:949px; position:absolute; right:0px; } #hare { top:1274px; position:absolute; left:0px; } #bear { top:1599px; position:absolute; right:0px; } #footer { position: absolute; left: 393px; top: 1941px; width: 251px; color: #0F9; } #footer a { color: #0f9; } .atss { left: 0; } #infocontent { position: absolute; z-index: 3; left: 15px; top: 333px; height: 348px; width: 789px; } #mywowslider { position: absolute; z-index: 3; left: 640px; top: 684px; } #poll { position: absolute; z-index: 3; left: 815px; top: 344px; } #trailer1 { position: absolute; z-index: 3; left: 40px; top: 598px; } #trailer2 { position: absolute; z-index: 3; left: 40px; top: 948px; } #trailer1header { position: absolute; z-index: 3; left: 200px; top: 550px; width: 240px; font-style: italic; font-weight: normal; } #trailer2header { position: absolute; z-index: 3; left: 200px; top: 898px; width: 241px; height: 51px; font-style: italic; font-weight: normal; } #disqus { position: absolute; z-index: 3; left: 0px; top: 1340px; } #sources { position: absolute; z-index: 3; left: 394px; top: 1249px; width: 212px; }

Read the article

Clearing C#'s WebBrowser control's cookies for all sites WITHOUT clearing for IE itself

- by Helgi Hrafn Gunnarsson

Hail StackOverflow! The short version of what I'm trying to do is in the title. Here's the long version. I have a bit of a complex problem which I'm sure I will receive a lot of guesses as a response to. In order to keep the well-intended but unfortunately useless guesses to a minimum, let me first mention that the solution to this problem is not simple, so simple suggestions will unfortunately not help at all, even though I appreciate the effort. C#'s WebBrowser component is fundamentally IE itself so solutions with any sorts of caveats will almost certainly not work. I need to do exactly what I'm trying to do, and even a seemingly minor caveat will defeat the purpose completely. At the risk of sounding arrogant, I need assistance from someone who really has in-depth knowledge about C#'s WebBrowser and/or WinInet and/or how to communicate with Windows's underlying system from C#... or how to encapsulate C++ code in C#. That said, I don't expect anyone to do this for me, and I've found some promising hints which are explained later in this question. But first... what I'm trying to achieve is this. I have a Windows.Forms component which contains a WebBrowser control. This control needs to: Clear ALL cookies for ALL websites. Visit several websites, one after another, and record cookies and handle them correctly. This part works fine already so I don't have any problems with this. Rinse and repeat... theoretically forever. Now, here's the real problem. I need to clear all those cookies (for any and all sites), but only for the WebBrowser control itself and NOT the cookies which IE proper uses. What's fundamentally wrong with this approach is of course the fact that C#'s WebBrowser control is IE. But I'm a stubborn young man and I insist on it being possible, or else! ;) Here's where I'm stuck at the moment. It is quite simply impossible to clear all cookies for the WebBrowser control programmatically through C# alone. One must use DllImport and all the crazy stuff that comes with it. This chunk works fine for that purpose: [DllImport("wininet.dll", SetLastError = true)] private static extern bool InternetSetOption(IntPtr hInternet, int dwOption, IntPtr lpBuffer, int lpdwBufferLength); And then, in the function that actually does the clearing of the cookies: InternetSetOption(IntPtr.Zero, INTERNET_OPTION_END_BROWSER_SESSION, IntPtr.Zero, 0); Then all the cookies get cleared and as such, I'm happy. The program works exactly as intended, aside from the fact that it also clears IE's cookies, which must not be allowed to happen. The problem is that this also clears the cookies for IE proper, and I can't have that happen. From one fellow StackOverflower (if that's a word), Sheng Jiang proposed this to a different problem in a comment, but didn't elaborate further: "If you want to isolate your application's cookies you need to override the Cache directory registry setting via IDocHostUIHandler2::GetOverrideKeyPath" I've looked around the internet for IDocHostUIHandler2 and GetOverrideKeyPath, but I've got no idea of how to use them from C# to isolate cookies to my WebBrowser control. My experience with the Windows registry is limited to RegEdit (so I understand that it's a tree structure with different data types but that's about it... I have no in-depth knowledge of the registry's relationship with IE, for example). Here's what I dug up on MSDN: IDocHostUIHandler2 docs: http://msdn.microsoft.com/en-us/library/aa753275%28VS.85%29.aspx GetOverrideKeyPath docs: http://msdn.microsoft.com/en-us/library/aa753274%28VS.85%29.aspx I think I know roughly what these things do, I just don't know how to use them. So, I guess that's it! Any help is greatly appreciated.

Read the article

create fixed length flat file with Java

- by Leslie

I have a process that currently runs in a Delphi application that I wrote and I need to convert it to a Java process that will run on our web application. Basically our State Financial (legacy) system requires this file in a specific output. In Delphi it is like this: procedure CreateSHAREJournalFile(AppDate : string; ClassCode : string; BudgetRef : String; AccountNumber : string; FYEStep : integer); var GLFileInfo : TStrings; MPayFormat, HPayFormat, TPayFormat : string;<br> const<br> //this is the fixed length format for each item in the file<br> HeaderFormat = '%-1s%-5s%-10s%-8s%-12s%-10s%-21s%-3s%-71s%-3s%-20s%-1s';<br> DetailFormat = '%-1s%-5s%-9s%-10s%-10s%-10s%-10s%-8s%-6s%-5s%-5s%-5s%-8s%-25s%-10s%-60s%-28s%-66s%-28s';<br> begin<br> try<br>//get the data from the query<br> with dmJMS.qryShare do<br> begin<br> SQL.Clear;<br> SQL.Add('SELECT SUM(TOTHRPAY) As HourPay, SUM(TOTMLPAY) As MilePay, SUM(TOTALPAY) AS TotalPay FROM JMPCHECK INNER JOIN JMPMAIN ON JMPCHECK.JURNUM = JMPMAIN.JURNUM WHERE PANELID LIKE ''' + Copy(AppDate, 3, 6) + '%'' ');<br> if FYEStep > -1 then<br> SQL.Add('AND WARRANTNO = ' + QUotedStr(IntToStr(FYEStep)));<br> Active := True;<br> //assign totals to variables so they can be padded with leading zeros<br> MPayFormat := FieldByName('MilePay').AsString;<br> while length(MPayFormat) < 28 do <br>MPayFormat := '0' + MPayFormat;<br> HPayFormat := FieldByName('HourPay').AsString;<br> while length(HPayFormat) < 28 do <br>HPayFormat := '0' + HPayFormat;<br> TPayFormat := Format('%f' ,[(FieldByName('TotalPay').AsCurrency)]);<br> while length(TPayFormat) < 27 do<br> TPayFormat := '0' + TPayFormat;<br> TPayFormat := '-' + TPayFormat;<br> //create a TStringlist to put each line item into<br> GLFileInfo := TStringList.Create;<br> //add header info using HeaderFormat defined above<br> GLFileInfo.Add(Format(HeaderFormat, ['H', '21801', 'NEXT', FormatDateTime('MMDDYYYY', Today), '', 'ACTUALS', '', 'EXT', '', 'EXT', '', 'N']));<br> //add detail info using DetailFormat defined above<br> GLFileInfo.Add(Format(DetailFormat, ['L', '21801', '1', 'ACTUALS', AccountNumber, '', '1414000000', '111500', '', '01200', ClassCode, '', BudgetRef, '', AccountNumber + '0300', '', MPayFormat, '', MPayFormat]));<br> GLFileInfo.Add(Format(DetailFormat, ['L', '21801', '2', 'ACTUALS', AccountNumber, '', '1414000000', '111500', '', '01200', ClassCode, '', BudgetRef, '', AccountNumber + '0100', '', HPayFormat, '', HPayFormat]));<br> GLFileInfo.Add(Format(DetailFormat, ['L', '21801', '3', 'ACTUALS', '101900', '', '1414000000', '111500', '', '01200', ClassCode, '', BudgetRef, '', '', '', TPayFormat, '', TPayFormat]));<br> //save TStringList to text file<br> GLFileINfo.SaveToFile(ExtractFilePath(Application.ExeName) + 'FileTransfer\GL_' + formatdateTime('mmddyy', Today) + SequenceID + '24400' + '.txt');<br> end;<br> finally<br> GLFileINfo.Free;<br> end; end; is there an equivalent in Java for the Format option? Or the TStringList that saves to a text file? Thanks for any information....haven't done a lot of Java programming! Leslie

Read the article

Could not load file or assembly 'System.Data.SQLite'

- by J. Pablo Fernández

I've installed ELMAH 1.1 .Net 3.5 x64 in my ASP.NET project and now I'm getting this error (whenever I try to see any page): Could not load file or assembly 'System.Data.SQLite, Version=1.0.61.0, Culture=neutral, PublicKeyToken=db937bc2d44ff139' or one of its dependencies. An attempt was made to load a program with an incorrect format. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.BadImageFormatException: Could not load file or assembly 'System.Data.SQLite, Version=1.0.61.0, Culture=neutral, PublicKeyToken=db937bc2d44ff139' or one of its dependencies. An attempt was made to load a program with an incorrect format. More error details at the bottom. My Active Solution platform is "Any CPU" and I'm running on a x64 Windows 7 on an x64, of course, processor. The reason why we are using this version of ELMAH is because 1.0 .Net 3.5 (x86, which is the only platform for which it's compiled) gave us this same error on our x64 Windows server. I've tried compiling for x86 and x64 and I get the same error. I've tried removing the all compiler output (bin and obj). Finally I've made a reference to the SQLite dll directly, something that was not needed for the project to work on the server and I've got this compiler error: Error 1 Warning as Error: Assembly generation -- Referenced assembly 'System.Data.SQLite.dll' targets a different processor MyProject Any ideas what the problem might be? More error details: Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [BadImageFormatException: Could not load file or assembly 'System.Data.SQLite, Version=1.0.61.0, Culture=neutral, PublicKeyToken=db937bc2d44ff139' or one of its dependencies. An attempt was made to load a program with an incorrect format.] System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0 System.Reflection.Assembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +43 System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +127 System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +142 System.Reflection.Assembly.Load(String assemblyString) +28 System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +46 [ConfigurationErrorsException: Could not load file or assembly 'System.Data.SQLite, Version=1.0.61.0, Culture=neutral, PublicKeyToken=db937bc2d44ff139' or one of its dependencies. An attempt was made to load a program with an incorrect format.] System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +613 System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +203 System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +105 System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) +178 System.Web.Compilation.BuildProvidersCompiler..ctor(VirtualPath configPath, Boolean supportLocalization, String outputAssemblyName) +54 System.Web.Compilation.ApplicationBuildProvider.GetGlobalAsaxBuildResult(Boolean isPrecompiledApp) +232 System.Web.Compilation.BuildManager.CompileGlobalAsax() +52 System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled() +337 [HttpException (0x80004005): Could not load file or assembly 'System.Data.SQLite, Version=1.0.61.0, Culture=neutral, PublicKeyToken=db937bc2d44ff139' or one of its dependencies. An attempt was made to load a program with an incorrect format.] System.Web.Compilation.BuildManager.ReportTopLevelCompilationException() +58 System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled() +512 System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters) +729 [HttpException (0x80004005): Could not load file or assembly 'System.Data.SQLite, Version=1.0.61.0, Culture=neutral, PublicKeyToken=db937bc2d44ff139' or one of its dependencies. An attempt was made to load a program with an incorrect format.] System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +8896783 System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +85 System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +259

Read the article

Binding navigation property to RadGrid while using EntityDataSource control

- by Matrix

I'm new to Entity Framework and I got stuck in an issue while trying to bind a navigation property (foreign key reference) to a dropdownlist. I have Telerik RadGrid control which gets the data using a EntityDataSource control. Here is the model description: Applications: AppId, AppName, ServerId Servers: ServerId, ServerName The Applicaitons.ServerId is a foreign key reference to Servers.ServerId. The RadGrid lists the applications and allows the user to insert/update/delete an application. I want to show the server names as a dropdownlist in edit mode which I'm not able to. . Here is my aspx code: <telerik:RadGrid ID="gridApplications" runat="server" Skin="Sunset" AllowAutomaticInserts="True" AllowAutomaticDeletes="True" AllowPaging="True" AllowAutomaticUpdates="True" AutoGenerateColumns="False" OnItemCreated="gridApplications_ItemCreated" DataSourceID="applicationsEntityDataSource" Width="50%" OnItemInserted="gridApplications_ItemInserted" OnItemUpdated="gridApplications_ItemUpdated" OnItemDeleted="gridApplications_ItemDeleted" GridLines="None"> <MasterTableView CommandItemDisplay="Top" AutoGenerateColumns="False" DataKeyNames="AppId" DataSourceID="applicationsEntityDataSource"> <RowIndicatorColumn> <HeaderStyle Width="20px" /> </RowIndicatorColumn> <ExpandCollapseColumn> <HeaderStyle Width="20px" /> </ExpandCollapseColumn> <Columns> <telerik:GridEditCommandColumn ButtonType="ImageButton" UniqueName="EditCommandColumn" HeaderText="Edit" ItemStyle-Width="10%"> </telerik:GridEditCommandColumn> <telerik:GridButtonColumn CommandName="Delete" Text="Delete" UniqueName="DeleteColumn" ConfirmText="Are you sure you want to delete this application?" ConfirmTitle="Confirm Delete" ConfirmDialogType="Classic" ItemStyle-Width="10%" HeaderText="Delete"> </telerik:GridButtonColumn> <telerik:GridBoundColumn DataField="AppId" UniqueName="AppId" Visible="false" HeaderText="Application Id" ReadOnly="true"> </telerik:GridBoundColumn> <telerik:GridBoundColumn DataField="AppName" UniqueName="AppName" HeaderText="Application Name" MaxLength="30" ItemStyle-Width="40%"> </telerik:GridBoundColumn> <telerik:GridTemplateColumn DataField="ServerId" UniqueName="ServerId" HeaderText="Server Hosted" EditFormColumnIndex="1"> <EditItemTemplate> <asp:DropDownList ID="ddlServerHosted" runat="server" DataTextField="Servers.ServerName" DataValueField="ServerId" Width="40%"> </asp:DropDownList> </EditItemTemplate> </telerik:GridTemplateColumn> </Columns> <EditFormSettings ColumnNumber="2" CaptionDataField="AppId" InsertCaption="Insert New Application" EditFormType="AutoGenerated"> <EditColumn InsertText="Insert record" EditText="Edit application id #:" EditFormColumnIndex="0" UpdateText="Application updated" UniqueName="InsertCommandColumn1" CancelText="Cancel insert" ButtonType="ImageButton"></EditColumn> <FormTableItemStyle Wrap="false" /> <FormTableStyle GridLines="Horizontal" CellPadding="2" CellSpacing="0" Height="110px" Width="110px" /> <FormTableAlternatingItemStyle Wrap="false" /> <FormStyle Width="100%" BackColor="#EEF2EA" /> <FormTableButtonRowStyle HorizontalAlign="Right" /> </EditFormSettings> </MasterTableView> </telerik:RadGrid> <asp:EntityDataSource ID="applicationsEntityDataSource" runat="server" ConnectionString="name=AnalyticsEntities" EnableDelete="True" EntityTypeFilter="Applications" EnableInsert="True" EnableUpdate="True" EntitySetName="Applications" DefaultContainerName="AnalyticsEntities" Include="Servers"> </asp:EntityDataSource> I tried another approach where I replaced the GridTemplateColumn with the following code <telerik:RadComboBox ID="RadComboBox1" DataSourceID="serversEntityDataSource" DataTextField="ServerName" DataValueField="ServerId" AppendDataBoundItems="true" runat="server" > <Items> <telerik:RadComboBoxItem /> </Items> and using a separate EntityDataSource control as follows: <asp:EntityDataSource ID="serversEntityDataSource" runat="server" ConnectionString="name=AnalyticsEntities" EnableDelete="True" EntityTypeFilter="Servers" EnableInsert="True" EnableUpdate="True" EntitySetName="Servers" DefaultContainerName="AnalyticsEntities"> </asp:EntityDataSource> but, I get the following error. Application cannot be inserted. Reason: Entities in 'AnalyticsEntities.Applications' participate in the 'FK_Servers_Applications' relationship. 0 related 'Servers' were found. 1 'Servers' is expected. My question is, how do you bind the navigation property and load the values in the DropDownList/RadComboBox control?

Read the article

start apache2 in chroot environment

- by xero

This is my first time I am trying to install Apache2 HTTP server in a chroot environment. That's why i decided to follow this procedure : http://www.symantec.com/connect/articles/securing-apache-2-step-step my web server start with successful : root@ubuntu:/usr/local/apache2/bin/apachectl start [Tue Oct 29 01:49:15.879868 2013] [core:warn] [pid 10835] AH00117: Ignoring deprecated use of DefaultType in line 60 of /usr/local/apache2/conf/httpd.conf. AH00548: NameVirtualHost has no effect and will be removed in the next release /usr/local/apache2/conf/httpd.conf:81 AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1. Set the 'ServerName' directive globally to suppress this message root@ubuntu:/chroot/httpd/etc# netstat -antu Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN But at the end of part "Chrooting the server" i have always the same problem. When i try to start apache2 in chroot i have always this error : root@ubuntu:/chroot/httpd/etc# chroot /chroot/httpd /usr/local/apache2/bin/apachectl chroot: failed to run command `/usr/local/apache2/bin/apachectl': No such file or directory however my apachectl file exist : root@ubuntu:/chroot/httpd/etc# ls -l /chroot/httpd/usr/local/apache2/bin/apachectl -rwxr-xr-x 1 root root 3437 Oct 29 02:28 /chroot/httpd/usr/local/apache2/bin/apachectl when I use strace to debug, there are errors with coreutils.mo and libc.mo : root@ubuntu:/chroot/httpd/etc# chroot /chroot/httpd /usr/local/apache2/bin/httpd group hosts nsswitch.conf passwd passwords resolv.conf root@ubuntu:/chroot/httpd/etc# strace chroot /chroot/httpd /usr/local/apache2/bin/apachectl execve("/usr/sbin/chroot", ["chroot", "/chroot/httpd", "/usr/local/apache2/bin/apachectl"], [/* 18 vars */]) = 0 brk(0) = 0x1e46000 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe89563b000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=18263, ...}) = 0 mmap(NULL, 18263, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fe895636000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/x86_64-linux-gnu/libc.so.6", O_RDONLY|O_CLOEXEC) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200\30\2\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=1815224, ...}) = 0 mmap(NULL, 3929304, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fe89505b000 mprotect(0x7fe895210000, 2097152, PROT_NONE) = 0 mmap(0x7fe895410000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1b5000) = 0x7fe895410000 mmap(0x7fe895416000, 17624, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fe895416000 close(3) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe895635000 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe895634000 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe895633000 arch_prctl(ARCH_SET_FS, 0x7fe895634700) = 0 mprotect(0x7fe895410000, 16384, PROT_READ) = 0 mprotect(0x606000, 4096, PROT_READ) = 0 mprotect(0x7fe89563d000, 4096, PROT_READ) = 0 munmap(0x7fe895636000, 18263) = 0 brk(0) = 0x1e46000 brk(0x1e67000) = 0x1e67000 open("/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=2919792, ...}) = 0 mmap(NULL, 2919792, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fe894d92000 close(3) = 0 chroot("/chroot/httpd") = 0 chdir("/") = 0 execve("/usr/local/apache2/bin/apachectl", ["/usr/local/apache2/bin/apachectl"], [/* 18 vars */]) = -1 ENOENT (No such file or directory) open("/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en_US.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en_US.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en_US/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en_US.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en_US.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en_US/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) write(2, "chroot: ", 8chroot: ) = 8 write(2, "failed to run command `/usr/loca"..., 56failed to run command `/usr/local/apache2/bin/apachectl') = 56 open("/usr/share/locale/en_US.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en_US.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en_US/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en_US.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en_US.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en_US/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) write(2, ": No such file or directory", 27: No such file or directory) = 27 write(2, "\n", 1 ) = 1 close(1) = 0 close(2) = 0 exit_group(127) = ? using the tutorial I did not find and copie libraries following on my server. I suppose there is no link with coreutils.mo and libc.mo : /usr/libexec/ld-elf.so.1 /var/run/ld-elf.so.hints I don't understand what files i forgot to copy in my chroot environment to be able to start my apache2. Any ideas ?

Read the article

Getting this CSS to work in IE6

- by jerrygarciuh

Hi folks, Working on this page: http://www.karlsenner.dreamhosters.com/about.php and having trouble with the navigation in IE6. It validates as XHTML 1.0 Transitional. Works great in FF, IE 8, Chrome, and Windows Safari. In IE6 and Opera 10 the drop menus appear too high. I tried adding in the different versions of http://code.google.com/p/ie7-js/ but it did not solve the issue in IE. The CSS looks like this: #wrapper { position: relative; display: block; background-color: inherit; margin: 0px auto; padding: 0; width: 900px; min-height: 900px; } #nav {} .navImage { position:relative; display:inline; height:102px; /* added in hopes of helping IE position but no dice */ } .subMenu { position:absolute; z-index:10; background-color:#FFF; top: 14px; left:0; } .subMenu a:link, .subMenu a:visited, .subMenu a:active{ display:block; width:90%; padding:6px; margin:0; color:#3CF; font-family:Tahoma, Geneva, sans-serif; font-size:14px; text-decoration:none; font-weight:bold; } .subMenu a:hover{ display:block; width:90%; padding:6px; margin:0; color:#3CF; background-color:#CCC; font-family:Tahoma, Geneva, sans-serif; font-size:14px; text-decoration:none; font-weight:bold; } jQuery rollovers: $('#navcompany').hover(function () { $('#companyMenu').css('display', 'block'); $('#companyImg').attr('src','g/nav/company_over.gif'); }, function () { $('#companyMenu').css('display', 'none'); $('#companyImg').attr('src','g/nav/company.gif'); }); And one of the cells. Since the menu is coming out of PHP and IE was not respecting the widths I just use PHP to get the nav image widths and write them to styles on the fly. Solved the width issue as IE acted like they should inherit their width from the wrapper. This may be a clue as to why they don't appear below their nav images but I can't sort it. <div id="navcompany" class="navImage" style="width:128px"> <a href="about.php"> <img src="g/nav/company_over.gif" name="companyImg" width="128" height="102" border="0" id="companyImg" alt="company" /> </a> <div id="companyMenu" class="subMenu" style="display:none; width:128px"> <a href="about.php">About us</a> <a href="location.php">Our location</a> </div> </div> Any advice greatly appreciated! JG

Read the article

MVC 2 with IIS 6 Problems

- by SlackerCoder

Hey guys, I'm using IIS 6 on a Windows 2003 Server and I am trying to get an MVC2 project installed on that machine. I am having nightmare-ish problems doing so! I've looked up TONS of references on what to do, and not 1 single one works. (They work for MVC1 projects, as I have a few of those running already using said solutions). Does anyone have any tips/hints/ideas on what needs to be done for MVC2 projects with IIS 6? I am definitely pulling my hair out over this. I have tried it on 2 of my dev servers, and both get the same result. The closest I can get to a served page is an error page "Object reference not set to an instance of an object", however, the page has try/catch blocks that are being ignored, so I dont think its running the code on the controller, I think it's saying that the controller is the error. (For the reference, the error in question is directed at the HomeController.cs file). What I've tried: Wildcard mapping Changing routes to {controller}.mvc Changing routes to {controller}.aspx Adding the .mvc extension to IIS Modifying routes in Global.asax There's a LOT of code in this project so far, so I will only post the first page(s) that should get served: MASTER PAGE: <div class="page"> <div id="header"> <div id="title"> <h1>Meritain RedCard Interface 2.0</h1> </div>  <div id="menucontainer"> <% if (Session["UserData"] != null) { %> <% if (/*User Security Checks Out*/) { %> <ul id="menu"> <li><%= Html.ActionLink("Home", "Index", "Home")%></li> <li><%= Html.ActionLink("Selection", "Index", "Select", new { area = "Selector" }, null)%></li> <li><%= Html.ActionLink("Audit", "Index", "Audit", new { area = "Auditor" }, null)%></li> <li><%= Html.ActionLink("Setup", "Index", "Setup", new { area = "Setup" }, null)%></li> <li><%= Html.ActionLink("About", "About", "Home")%></li> </ul> <% } %> <% } %> </div> </div> <div id="main"> <asp:ContentPlaceHolder ID="MainContent" runat="server" /> <div id="footer"> </div> </div> </div> Default.aspx.cs: [I added this file as a potential solution, since it works with MVC 1] protected void Page_Load(object sender, EventArgs e) { string originalPath = Request.Path; HttpContext.Current.RewritePath(Request.ApplicationPath, false); IHttpHandler httpHandler = new MvcHttpHandler(); httpHandler.ProcessRequest(HttpContext.Current); HttpContext.Current.RewritePath(originalPath, false); } HomeController.cs: public ActionResult Index() { loadApplication(); ViewData["Message"] = "Welcome to ASP.NET MVC!"; return View(); } public ActionResult About() { return View(); } private void loadApplication() { Session["UserData"] = CreateUserSecurity(HttpContext.User.Identity.Name.ToString()); } I did not list the CreateUserSecurity method, but all it does it call the DB using the Username and returns the record in the database that matches the username. EDIT: Added code and what I've tried so far (as requested).

Read the article

Juniper SSG-5 subinterface vlan routing to the internet

- by catfish

I'm unable to get a brand new Juniper SSG-5 with latest 6.3.0r05 firmware routing to the internet from a subinterface I created on bgroup0 setup as vlan2 (bgroup0.1 on "wifi" zone). When connected on the default vlan it gets on the internet just fine. When I switch to vlan2 I'm unable to get to the internet. I am able to get the correct ip address (10.150.0.0/24) from dhcp, able to get to the juniper management page, etc but nothing past the firewall, can't ping 4.2.2.2 or the internet gateway. Even setting up logging on the wifi-to-untrust policy and it does shows the attempts (it's it's timeouts). 172.31.16.0/24 is the untrusted lan, it's already nat'ed but works fine for testing. Can ping this ip from the default vlan but not from vlan2 192.168.1.0/24 is the trusted main lan 10.150.0.0/24 is the wifi isolated lan on vlan2 The idea is to setup an AP with lan and guest access (AP supports multiple ssid's on different vlans). I know I can setup the juniper to use different ports for the wifi lan and use their procurve switch to do the vlan separation, but I never used vlan'ing on a Juniper firewall and I would like to try it out this way. Here is the complete config file: unset key protection enable set clock timezone -5 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set alg appleichat enable unset alg appleichat re-assembly enable set alg sctp enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin name "netscreen" set admin password "xxxxxxxxxxxxxxxx" set admin auth web timeout 10 set admin auth dial-in timeout 3 set admin auth server "Local" set admin format dos set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone id 100 "Wifi" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "MGT" block unset zone "V1-Trust" tcp-rst unset zone "V1-Untrust" tcp-rst set zone "DMZ" tcp-rst unset zone "V1-DMZ" tcp-rst unset zone "VLAN" tcp-rst unset zone "Wifi" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Untrust" set interface "bgroup0" zone "Trust" set interface "bgroup0.1" tag 2 zone "Wifi" set interface "bgroup1" zone "DMZ" set interface bgroup0 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup0 port ethernet0/5 set interface bgroup0 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 172.31.16.243/24 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup0.1 ip 10.150.0.1/24 set interface bgroup0.1 nat set interface bgroup0.1 mtu 1500 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup0.1 ip manageable set interface ethernet0/0 manage ping set interface ethernet0/1 manage ping set interface bgroup0.1 manage ping set interface bgroup0.1 manage telnet set interface bgroup0.1 manage web unset interface bgroup1 manage ping set interface bgroup0 dhcp server service set interface bgroup0.1 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup0.1 dhcp server enable set interface bgroup0 dhcp server option gateway 192.168.1.1 set interface bgroup0 dhcp server option netmask 255.255.255.0 set interface bgroup0 dhcp server option dns1 8.8.8.8 set interface bgroup0.1 dhcp server option lease 1440 set interface bgroup0.1 dhcp server option gateway 10.150.0.1 set interface bgroup0.1 dhcp server option netmask 255.255.255.0 set interface bgroup0.1 dhcp server option dns1 8.8.8.8 set interface bgroup0 dhcp server ip 192.168.1.33 to 192.168.1.126 set interface bgroup0.1 dhcp server ip 10.150.0.50 to 10.150.0.100 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup0.1 dhcp server config next-server-ip set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set flow tcp-mss unset flow no-tcp-seq-check set flow tcp-syn-check unset flow tcp-syn-bit-check set flow reverse-route clear-text prefer set flow reverse-route tunnel always set pki authority default scep mode "auto" set pki x509 default cert-path partial set crypto-policy exit set ike respond-bad-spi 1 set ike ikev2 ike-sa-soft-lifetime 60 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit set policy id 1 exit set policy id 2 from "Wifi" to "Untrust" "Any" "Any" "ANY" permit log set policy id 2 exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 unset license-key auto-update set telnet client enable set snmp port listen 161 set snmp port trap 162 set snmpv3 local-engine id "0162122009006149" set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route set route 0.0.0.0/0 interface ethernet0/0 gateway 172.31.16.1 exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit

Read the article

Problem with RAID5 (mdadm) - disk detached

- by poscaman

Having these lines in /var/log/syslog Apr 18 16:53:05 Server kernel: [4487878.816036] ata4: EH in SWNCQ mode,QC:qc_active 0x1 sactive 0x1 Apr 18 16:53:05 Server kernel: [4487878.816058] ata4: SWNCQ:qc_active 0x1 defer_bits 0x0 last_issue_tag 0x0 Apr 18 16:53:05 Server kernel: [4487878.816059] dhfis 0x1 dmafis 0x1 sdbfis 0x0 Apr 18 16:53:05 Server kernel: [4487878.816093] ata4: ATA_REG 0x40 ERR_REG 0x0 Apr 18 16:53:05 Server kernel: [4487878.816108] ata4: tag : dhfis dmafis sdbfis sacitve Apr 18 16:53:05 Server kernel: [4487878.816125] ata4: tag 0x0: 1 1 0 1 Apr 18 16:53:05 Server kernel: [4487878.816150] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen Apr 18 16:53:05 Server kernel: [4487878.816178] ata4.00: failed command: WRITE FPDMA QUEUED Apr 18 16:53:05 Server kernel: [4487878.816199] ata4.00: cmd 61/08:00:00:88:e0/00:00:e8:00:00/40 tag 0 ncq 4096 out Apr 18 16:53:05 Server kernel: [4487878.816200] res 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) Apr 18 16:53:05 Server kernel: [4487878.816253] ata4.00: status: { DRDY } Apr 18 16:53:05 Server kernel: [4487878.816272] ata4: hard resetting link Apr 18 16:53:05 Server kernel: [4487878.816274] ata4: nv: skipping hardreset on occupied port Apr 18 16:53:06 Server kernel: [4487879.676029] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 18 16:53:07 Server kernel: [4487880.416749] ata4.00: n_sectors mismatch 3907029168 != 268435455 Apr 18 16:53:07 Server kernel: [4487880.416752] ata4.00: revalidation failed (errno=-19) Apr 18 16:53:07 Server kernel: [4487880.416773] ata4.00: limiting speed to UDMA/133:PIO2 Apr 18 16:53:11 Server kernel: [4487884.676024] ata4: hard resetting link Apr 18 16:53:11 Server kernel: [4487884.676027] ata4: nv: skipping hardreset on occupied port Apr 18 16:53:12 Server kernel: [4487885.144032] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 18 16:53:12 Server kernel: [4487885.240185] ata4.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) Apr 18 16:53:12 Server kernel: [4487885.240190] ata4.00: revalidation failed (errno=-5) Apr 18 16:53:12 Server kernel: [4487885.240210] ata4.00: disabled Apr 18 16:53:17 Server kernel: [4487890.144023] ata4: hard resetting link Apr 18 16:53:17 Server kernel: [4487891.024033] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 18 16:53:17 Server kernel: [4487891.033357] ata4.00: ATA-8: WDC WD20EARS-00S8B1, 80.00A80, max UDMA/133 Apr 18 16:53:17 Server kernel: [4487891.033360] ata4.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32) Apr 18 16:53:17 Server kernel: [4487891.048347] ata4.00: configured for UDMA/133 Apr 18 16:53:17 Server kernel: [4487891.048361] sd 3:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Apr 18 16:53:17 Server kernel: [4487891.048365] sd 3:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor] Apr 18 16:53:17 Server kernel: [4487891.048369] Descriptor sense data with sense descriptors (in hex): Apr 18 16:53:17 Server kernel: [4487891.048371] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 Apr 18 16:53:17 Server kernel: [4487891.048378] 00 00 00 00 Apr 18 16:53:17 Server kernel: [4487891.048382] sd 3:0:0:0: [sdc] Add. Sense: No additional sense information Apr 18 16:53:17 Server kernel: [4487891.048385] sd 3:0:0:0: [sdc] CDB: Write(10): 2a 00 e8 e0 88 00 00 00 08 00 Apr 18 16:53:17 Server kernel: [4487891.048393] end_request: I/O error, dev sdc, sector 3907028992 Apr 18 16:53:17 Server kernel: [4487891.048420] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048440] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048458] end_request: I/O error, dev sdc, sector 3907028992 Apr 18 16:53:17 Server kernel: [4487891.048477] md: super_written gets error=-5, uptodate=0 Apr 18 16:53:17 Server kernel: [4487891.048482] raid5: Disk failure on sdc, disabling device. Apr 18 16:53:17 Server kernel: [4487891.048483] raid5: Operation continuing on 3 devices. Apr 18 16:53:17 Server kernel: [4487891.048525] ata4: EH complete Apr 18 16:53:17 Server kernel: [4487891.048554] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048576] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048596] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048615] sd 3:0:0:0: [sdc] READ CAPACITY(16) failed Apr 18 16:53:17 Server kernel: [4487891.048617] sd 3:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Apr 18 16:53:17 Server kernel: [4487891.048620] sd 3:0:0:0: [sdc] Sense not available. Apr 18 16:53:17 Server kernel: [4487891.048624] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048643] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048663] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048681] sd 3:0:0:0: [sdc] READ CAPACITY failed Apr 18 16:53:17 Server kernel: [4487891.048683] sd 3:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Apr 18 16:53:17 Server kernel: [4487891.048685] sd 3:0:0:0: [sdc] Sense not available. Apr 18 16:53:17 Server kernel: [4487891.048689] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048709] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048800] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048860] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.049028] sd 3:0:0:0: [sdc] Asking for cache data failed Apr 18 16:53:17 Server kernel: [4487891.049048] sd 3:0:0:0: [sdc] Assuming drive cache: write through Apr 18 16:53:17 Server kernel: [4487891.049071] sdc: detected capacity change from 2000398934016 to 0 Apr 18 16:53:17 Server kernel: [4487891.049080] ata4.00: detaching (SCSI 3:0:0:0) Apr 18 16:53:18 Server kernel: [4487891.061149] sd 3:0:0:0: [sdc] Stopping disk Apr 18 16:53:18 Server kernel: [4487891.485492] RAID5 conf printout: Apr 18 16:53:18 Server kernel: [4487891.485496] --- rd:4 wd:3 Apr 18 16:53:18 Server kernel: [4487891.485500] disk 0, o:1, dev:sdb Apr 18 16:53:18 Server kernel: [4487891.485502] disk 1, o:0, dev:sdc Apr 18 16:53:18 Server kernel: [4487891.485504] disk 2, o:1, dev:sdd Apr 18 16:53:18 Server kernel: [4487891.485506] disk 3, o:1, dev:sde Apr 18 16:53:18 Server kernel: [4487891.497014] RAID5 conf printout: Apr 18 16:53:18 Server kernel: [4487891.497016] --- rd:4 wd:3 Apr 18 16:53:18 Server kernel: [4487891.497018] disk 0, o:1, dev:sdb Apr 18 16:53:18 Server kernel: [4487891.497019] disk 2, o:1, dev:sdd Apr 18 16:53:18 Server kernel: [4487891.497021] disk 3, o:1, dev:sde Apr 18 16:53:18 Server kernel: [4487891.838719] scsi 3:0:0:0: Direct-Access ATA WDC WD20EARS-00S 80.0 PQ: 0 ANSI: 5 Apr 18 16:53:18 Server kernel: [4487891.838886] sd 3:0:0:0: Attached scsi generic sg3 type 0 Apr 18 16:53:18 Server kernel: [4487891.838911] sd 3:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) Apr 18 16:53:18 Server kernel: [4487891.838964] sd 3:0:0:0: [sdf] Write Protect is off Apr 18 16:53:18 Server kernel: [4487891.838967] sd 3:0:0:0: [sdf] Mode Sense: 00 3a 00 00 Apr 18 16:53:18 Server kernel: [4487891.838988] sd 3:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 18 16:53:20 Server kernel: [4487891.839147] sdf: unknown partition table Apr 18 16:53:20 Server kernel: [4487893.130026] sd 3:0:0:0: [sdf] Attached SCSI disk Right now, i'm unable to do anything on /dev/sdc. Is there any way to try to re-attach it? I don't want to power-down the server unless absolutely necessary System: Debian Stable 2.6.32-5-amd64 mdadm version 3.1.4-1+8efb9d1 cat /proc/mdstat Personalities : [raid6] [raid5] [raid4] md0 : active raid5 sdb[0] sdc[4](F) sde[3] sdd[2] 5860543488 blocks level 5, 64k chunk, algorithm 2 [4/3] [U_UU] unused devices: <none> mdadm --examine --scan ARRAY /dev/md0 UUID=1a7744b5:912ec7af:f82a9565:e3b453b4

Search Results

Search found 13178 results on 528 pages for 'subsonic active record'.

Page 499/528 | < Previous Page | 495 496 497 498 499 500 501 502 503 504 505 506 | Next Page >

- by HCM-Oracle

- by Richard Bingham

- by muzzy

- by Ken Le

- by scoter

- by okeofs

- by Duncan Mills

- by Jian Zhang-Oracle

- by nikolaosk

- by reza_rahman

- by ???02

- by Todd Bao

- by JaneZhang(???)

- by Greenhouse Gases

- by NeoNMD

- by Kelsey Nealon

- by Helgi Hrafn Gunnarsson

- by Leslie

- by J. Pablo Fernández

- by Matrix

- by xero

- by jerrygarciuh

- by SlackerCoder

- by catfish

- by poscaman

< Previous Page | 495 496 497 498 499 500 501 502 503 504 505 506 | Next Page >