Search Results

Search found 1267 results on 51 pages for 'ati catalyst'.

Page 5/51 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Triple monitor setup with an ATI Radeon 4200?

    - by Ben Clapp
    I have a relatively new Powerspec computer (i5 quad core processor, about a year or two old) and just grabbed a new relatively inexpensive ($40?) graphics card. It has 1 DVI, one VGA, and one HDMI output. I have two (different type) monitors plugged into the DVI and VGA slots, and they work great. However, I cannot seem to be able to get a third monitor in the HDMI slot to work. I can see the monitor (and monitor info) show up in display settings. However, if I try to switch the monitor to 'on' and click apply, nothing happens. Anyone have the slightest idea what the problem might be? (It's a Radeon graphics card FYI; if I remember right I think it was the Radeon 4200?)

    Read the article

  • How to stop fan running always on Asus P8P67LE motherboard with ATI Radeon HD6900

    - by Chris Good
    I'm using Ubuntu 12.04 LTS. I'm not sure if it is the CPU (i7) fan or the video card fan. I've tried using lm-sensors & fancontrol sudo sensors-detect Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `w83627ehf': * ISA bus, address 0x290 Chip `Nuvoton NCT6776F Super IO Sensors' (confidence: 9) Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: # Chip drivers coretemp w83627ehf Like many people, I'm also getting error: /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed Here is the output of sensors: # sensors radeon-pci-0100 Adapter: PCI adapter temp1: +71.0°C coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +44.0°C (high = +80.0°C, crit = +98.0°C) Core 0: +44.0°C (high = +80.0°C, crit = +98.0°C) Core 1: +40.0°C (high = +80.0°C, crit = +98.0°C) Core 2: +43.0°C (high = +80.0°C, crit = +98.0°C) Core 3: +42.0°C (high = +80.0°C, crit = +98.0°C) I'm hoping some-one has already solved this for my configuration because this seems to be a problem for many people and there are many different suggestions.

    Read the article

  • Falied installing ATI X.Org binary driver!! (ATI Radeon HD 5400)

    - by Naveen
    The open source driver worked well with the fresh installation of Ubuntu 12.04, but it drains my laptop battery faster. So I installed the proprietary driver from jockey-gtk. It gave me this error message at the end of the installation: Here is the jockey.log After restarting the computer, I lost all the compositing animations. Compiz visual effects don't work. There is a black boarder around Docky. Please somebody help me...! Thanks!

    Read the article

  • Split screen and other issues on Ubuntu 11.10 with ATI graphics card

    - by garus
    Ever since updating my Ubuntu 11.04 to 11.10 I experience issues with graphics. The biggest is the "split screen" effect where my desktop is shifted to the right, resulting in having Unity bar in the middle of the screen. As shown here: http://i.imgur.com/I8nmZ.jpg This changes from boot to boot, sometimes it's on the left, sometimes in the middle. What I tried: Removing fglrx drivers completely Installing post-update version of them, but installation is broken ATM in the Ubuntu, so no go. No one is even trying to fix it (bug report https://bugs.launchpad.net/ubuntu/+source/nvidia-common/+bug/873058 and a couple of duplicates out there) Also using the open source "radeon" driver results in the same (I have a better successful boot ratio with this one, proprietary rarely lets me boot) Other artifacts are: serious screen tearing weird lines flickering in random places lagginess Did anyone experience that? My specs: Ubuntu 11.10 AMD Radeon HD 6950 1GB

    Read the article

  • how do I fix ati driver issue

    - by Michael
    I have little knowledge about ubuntu, but I am learning. Recently, my ubuntu 12.04 required that I update. I noticed that it was updating xorg and other things, after the update I was asked to reboot. I did. now when I start that computer up, it cannot detect any display and refuses to boot from usb. I have no idea how to recover my computer. It simply starts in what is akin to the terminal program and ask for my username and password. After that, I can enter commands. The problem may be because I manually installed drivers by copy pasting from some instructional that I now have no idea where they are, but what it amounts to is that I "built" the drivers. They were working GREAT until this update. I did this because otherwise I was unable to have sound through my hdmi. After I hand built the drivers, they worked great. After this update Ka-blam! nothing... Also, I had okay-ed lots of update sources (though all of them [xorg and such] were the stable versions, not the unstable update sources) Please help and thank you in advance. (if this is posted incorrectly or misplace, please let me know what to do)

    Read the article

  • ATI card - cannot set refresh rate higher than 60 Hz

    - by KubaV
    I am trying to set refresh rate to 85 Hz or 75 Hz at 1024x768 and 1280x1024. On Windows this works, so my card and monitor have 100% support. xrandr does not work - it gives me configure crtc 1 failed I use FGLRX. Please help Monitor:CRT - HP 92 (manual http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/lpv09818/lpv09818.pdf) G. card: AMD Radeon HD 6450 Sorry for bad english, I am Czech.

    Read the article

  • Your system is running in low-graphics mode with an ATI Radeon 3200 Graphics card

    - by say
    I installed 12.04 LTS (upgrade from 11.10) but When I start my computer it show "Your system is running in low-graphics mode, Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself." And than show dialog what I want to do, but this one doesn´t work correctly. So I can access only terminal but I don´t know how set this staf or how to start GUI. Because I´m terminal kiddies :-) Thanks for any help :-)

    Read the article

  • 12.04 precise HDMI not working on ATI Radeon

    - by sfxpt
    This is precisely a 12.04 HDMI output problem, because it works for 11.10 - everything else are the same, only the OS version is different. The symptom is that on my HDMI output TV screen, it always shows Unsupported resolution even after setting it to the resolution that works on Ubuntu 11.10 (via gnome-control-center, in which it detects my TV just fine), I still don't see any output on TV. The audio is not working either. I think it is 12.04's problem, because if I boot into Ubuntu 11.10, and everything else remain the same, HDMI output (video & audio) work just fine. 12.04 is a freshly installed, just the vanilla Ubuntu HD installation. How should I nailed down / fix the problem?

    Read the article

  • ATI gpu (video accel, decode, encode, ATI Stream, DXVA)

    - by Shiki
    Okay its a long question title for sure. I'm looking for a new video card (yes,SU is not a page for that, but wait). I've been a loyal NVidia customer ever since, now using a 8600gts. Old but still somewhat good, its a bit slow though. I want an upgrade because 8600gts wont support better vdpau and new features. I checked out the prices and the documents, I would need a GTX260 card. Which costs ..well.. a lot. ATI performs much better for that price. (At least on every test it outperforms GTX260). However, as far as I know there is no gpu accel with ATI. The things you can use is DXVA only, no other method. Could you correct me out there? Will be there a gpu accel for ATI also? Or is there one available? (DXVA is not bad, but kinda slow compared to NVIdia's CUDA.) What about openCL? How does ATI support that? (I'm talking about the 5850 ATI card at the minute, I would buy that instead of the NVidia.)

    Read the article

  • Can I get 4 screens running on an ATI Radeon HD 5700 series video card?

    - by Wayne
    I have successfully run 3 displays using the 5700, but i want to run a 4th screen off the HDMI Port. Mainly I would like it to Mirror the primary monitor onto the TV connected to the HDMI Port. Any help at all would be greatly appreciated. I can get a signal to it, i just have to disable one of my original 3 monitors. Im not willing to do that. So other than disabling one of my monitors, does anyone have any suggestions?

    Read the article

  • Can I get 4 screens running on an ATI Radeon HD 5700 series video card?

    - by Wayne
    I have successfully run 3 displays using the 5700, but i want to run a 4th screen off the HDMI Port. Mainly I would like it to Mirror the primary monitor onto the TV connected to the HDMI Port. Any help at all would be greatly appreciated. I can get a signal to it, i just have to disable one of my original 3 monitors. Im not willing to do that. So other than disabling one of my monitors, does anyone have any suggestions?

    Read the article

  • ATI firepro will not detect a second DVI-D monitor

    - by John
    OK so weird issue here. I have previously been running 6 screens off of 3 of the older ATI firepro graphics cards but they had a problem with the heat sink getting too hot and warping the PCB resulting in total failure of the card, to replace my three dead cards I purchased a new-type ATI firepro with the newer heat sink design. I'm only using one at the moment to make sure they've fixed the problem before I waste more money on 2 more cards but this is where things start to get weird. The Firepro's only have one port on them, they connect to two monitors via a splitter cable going from the one port to two DVI connectors for the screens. When I plug two identical monitors in via their DVI inputs not matter what I do windows and Catalyst will only detect one screen. However if I use the VGA input on one of the screens with a VGA - DVI adaptor to plug it in to the card it works fine. This confuses me greatly. I'm currently using the ATI Firepro 2270 Graphics card with identical DELL U2311H screens. I can post the rest of the system spec as well if needed but I wouldn't have thought it would make much difference as it had no problem handling 6 screens before the graphics cards failed. Naturally both catalyst and ATI drivers are the most current version. ATI tech support has been absolutely zero help, they seemed to get stumped as soon as I verified that both screens were plugged in and connected properly. Anyone have any ideas?

    Read the article

  • How to manage two video cards on a laptop (ATI and Intel)?

    - by Marc-François Cochaux-Laberge
    I have a laptop with two video cards. One ATI and on integrated Intel. On Windows, I can choose which video card I want to use. For example, I use the Intel card for normal use and for gaming, I switch to my ATI card for better performance, but a shorter battery life. In Ubuntu 10.10, only the Intel driver is installed, the ATI driver for my card doesn't work at all and there's heat coming out of my computer all the time, like when I'm playing video games on Windows. I think both cards are active, but only the Intel one is usefull. How can I solve this by making sure Ubuntu is aware of the two video cards and by disabling my ATI. Or may be I am all wrong about this?

    Read the article

  • How well supported is the ATI graphics on a Sony VAIO SA?

    - by whoami
    This is the first time i will be buying a laptop/desktop to use as a Ubuntu platform with ATI. Now i did notice a while back that ATI drivers were not in cahoots with Linux as of yet. I am just wondering if any one is still experiencing ATI issues, or this is no longer the case. I am looking to spend money on a laptop Upgrade, but I don't want to spend a screw load of money just to find out I can only use windows and my Graphics driver does not work. So the Question is: What's ATI Support like on Ubuntu 10.10 Here is what im thinking of buying http://www.gadgetfreak.gr/wp-content/uploads/2011/02/SB_S08_keyboard_B_us_FP-1024x716.jpg, If any one has the Sony VAIO SA Series and installed Ubuntu on it, please do share your story, about driver problems. On a side note my old Sony S-Series which im using now, i never got the fingerprint reader or the webcam working on it, has any one been able to do this for the new models? I preferably dont care about the fingerprint reader but do care about the webcam.

    Read the article

  • How can I ensure my Samsung Series 7 is actually using the Radeon switchable graphics?

    - by patricksweeney
    I have a Samsung Series 7 with the Radeon 6750M switchable graphics. The ATI software lets you force programs to use the dedicated card. However, I'm not convinced it is actually ever using it, as the frame rates on some non-taxing games (Portal, TF2) are merely OK. To make matters worse, it looks like the ATI Catalyst Control has vanished from my laptop. To make it even worse, you can't download the driver and ATI CCC from ATI's site, you need to download it from Samsung, and the ZIP they provide is corrupted. How can I ensure my Samsung Series 7 is actually using the Radeon switchable graphics?

    Read the article

  • Perl Catalyst -- Is this helpful to use for images/graphs display

    - by Octopus
    I have simple perl/cgi scripts based web server which is mainly used to display graphs and Images. I am looking to make it more technical and come to know about Catalyst. I have installed all the required perl modules on my test platform and created an application called myweb. Also, I am going through the catalyst documents to reach my goal but nothing helpful yet. Is Catalyst helpful to display images/graphs on web? How to use my existing cgi/perl scritps with Catalyst? Any example would be really appreciated.

    Read the article

  • Ubuntu 10.04 LTS - Dual monitor works only sometimes (ATI multi-desktop)

    - by Beres Botond
    I've been using my laptop with an external LCD monitor attached to it at work (Philips 201E). And at home with a different external monitor (Samsung 2032BW). I have an ATI graphics card (HD3450), with Ati Catalyst drivers enabled and I'm using the Single display desktop (Multi-Desktop) seeting. At work I have the external monitor on the left and laptop on the right, while at home the other way around. So when I switch between the two setups, I just needed to go to Ati Catalyst Control Center, change the order of the displays, change the resolution (Home - 1680x1050, Work - 1440x900), reboot and it was all fine. But since a while it doesn't work properly anymore: At home it still works fine. At work it doesn't work. Sometimes it works for some reason, after a few resolution/setting changes in ACCC and reboots... it's very strange and annoying. With the home monitor I can see the whole bootup process on both monitors (laptop + LCD) and it always just works fine. With the work monitor on the external LCD monitor I just see "No video input" until I get to the login screen, then it shows up there as well. But after login it will either: Flicker a few times, but then work OK. Or (more often) Flicker once and then go back to "No video input" again. I usually end up rebooting a few times until it works. Does anyone have any idea for fixing it? This is my xorg.conf currently: Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[6]-0" 0 0 Screen "amdcccle-Screen[6]-1" 1280 0 EndSection Section "Files" EndSection Section "Module" Load "glx" EndSection Section "ServerFlags" Option "Xinerama" "off" EndSection Section "Monitor" Identifier "0-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1440x900" EndSection Section "Device" Identifier "Default Device" Driver "fglrx" EndSection Section "Device" Identifier "amdcccle-Device[6]-0" Driver "fglrx" Option "Monitor-LVDS" "0-LVDS" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "amdcccle-Device[6]-1" Driver "fglrx" Option "Monitor-CRT1" "0-CRT1" BusID "PCI:6:0:0" Screen 1 EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[6]-0" Device "amdcccle-Device[6]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[6]-1" Device "amdcccle-Device[6]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

    Read the article

  • Upgrading ATI Catalyst drivers fails

    - by Iain
    I'm trying to upgrade my ATI HD 5770 graphics card drivers, as they keep crashing, but the upgrade keeps failing half way through. I have tried the full driver package and the drivers-only package. 10-5_vista64_win7_64_dd_ccc_enu.exe 10-5_vista64_win7_64_dd.exe I'm on Windows 7 Home Premium 64 bit. How can I upgrade?

    Read the article

  • Rotate monitor to portrait on Windows Server 2003 with ATI card

    - by Eli
    Does anyone know if it is possible to rotate a monitor from landscape to portrait mode on Windows Server 2003 32-bit with an ATI video card? According to Dell's site, I should be able to rotate my Dell P2310H monitor by installing drivers from their website, but they don't have drivers for Windows Server 2003. I let Windows Update search for the driver (with the driver CD that came with the monitor in my drive) and it did install drivers, but I still don't see any options for rotating. Some people say that the ATI Catalyst Control Center allows for monitor rotation, but I've never been able to run that software on Windows Server 2003. A google search reports that others have the same problem. Has anyone successfully figured out how to rotate a monitor on Windows Server 2003 with an ATI card?

    Read the article

  • How to get AMD Catalyst working on Arch x86_64

    - by gh403
    I've got a Dell Inspiron 15R 7520 with AMD's hybrid "PowerXpress" graphics. The integrated graphics card is (if I understand it correctly) integrated with the i7-3612QM processor, and the discrete graphics card is a "Southern Islands" Radeon HD 7730M. The integrated graphics work perfectly under Arch. However, the discrete graphics don't. I have tried several different methods, and the one that seems to get me the farthest with the least effort is the AUR package catalyst-total-pxp. After installing, rebooting, and issuing the commands # aticonfig --initial # pxp_switch_catalyst amd # X X completely fails to start. The X log can be found here. I don't understand what is failing; potentially, it has something to do with the way my card is hooked up--I think it's muxless, but I really don't know. What is the matter here? Any help would be appreciated.

    Read the article

  • ATI Driver for HP Pavilion dv2 notebook?

    - by Greg Mattes
    I'm looking for a Windows XP Professional (32-bit) ATI video driver for an HP Pavilion dv2 (model 1118nr). I've downloaded and run several drivers packages, but none have worked so far. The notebook has a sticker on it that reads, "ATI Radeon Premium Graphics 3000 Series" The notebook has an AMD Athlon Neo 64 CPU and it came with Vista 64, but I have a requirement to run 32-bit Windows XP. Does such a driver exist, and if so, where is it? I've tried the AMD ATI graphics drivers portal, but the "Mobility Radeon" section does not list the 3000 series. The "Radeon" section does list the 3000 series, but the package I downloaded and installed from there was not helpful. I also selected "All Graphics - Notebook" on the "Search Drivers and Downloads" page, then selected "Windows XP Professional/Home" on the OS drop down, pressed "Submit", and downloaded and installed the only choice (this single choice is listed twice), but again, it didn't seem to help.

    Read the article

  • Management VLAN Cisco Catalyst

    - by cha789
    I have configured a couple of VLANs on a Cisco Catalyst switch, i will put all the ports that clients is connected to, into these VLANs. I want to configure the native VLAN [vlan 1] as management VLAN so i can use a telnet client to connect to the switch. How can i block all but one specific IP-address to telnet into the switch? As i understand vlan 1 has many task regarding different protocols and i do not want to break that but only allow one specific IP-address to connect to the switch with a telnet client [actually the gateway ip address of the switch].

    Read the article

  • Rotate monitor to portrait on Windows Server 2003 with ATI card

    - by user10179
    Does anyone know if it is possible to rotate a monitor from landscape to portrait mode on Windows Server 2003 32-bit with an ATI video card? According to Dell's site, I should be able to rotate my Dell P2310H monitor by installing drivers from their website, but they don't have drivers for Windows Server 2003. I let Windows Update search for the driver (with the driver CD that came with the monitor in my drive) and it did install drivers, but I still don't see any options for rotating. Some people say that the ATI Catalyst Control Center allows for monitor rotation, but I've never been able to run that software on Windows Server 2003. A google search reports that others have the same problem. Has anyone successfully figured out how to rotate a monitor on Windows Server 2003 with an ATI card?

    Read the article

  • ATI driver in Fedora linux 11

    - by unknown (google)
    I recently built a pc with an ATI Radeon HD 5750. I have installed Fedora 11 and installed the device driver for the Radeon 5700 series proprietary drivers. I wanted to see if there is graphics hardware acceleration. I typed in glxinfo at the terminal and I got: X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 135 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 14 Current serial number in output stream: 14 I don't know how to fix this. I tried to go to the ATI Catalyst Control Center; that worked, but the ATI Catalyst Control Center (Administrator) doesn't work. If anyone knows how to fix this problem then please let me know. Thanks

    Read the article

  • Windows 7 ATI 6470M

    - by p_piorkowski
    I have some problems with my Dell Vostro 3350. I have to graphic card - Intel and ATI radeon 6470M. I have installed this driver. It's fresh installation of Windows 7. And my problem is that in device menager I can see in section graphic cards AMD Radeon HD 6490M and Intel(R) Graphics Family. Another thing is that I'm using two screens. And I want to use ATI readeon as default. At this moment I'm event not sure if ATI is working. Another strange thing is that when I run Catalyst Control Center in section Destkop Menagement i don't see nothing.

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >