Search Results

Search found 8228 results on 330 pages for 'card reader'.

Page 5/330 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Installing Linux from External Card Reader

  - by Subhamoy Sengupta

  I have this problem. I was experimenting if I could use a memory card (SDHC) as an USB drive for all intents and purposes, and when I put the card in an USB card reader, I can use it just like regular USB stick and it also shows up in the BBS popup menu as an USB stick. When I tried to create an installation media out of it like this: sudo dd if=/path/to/image of=/dev/sdb And tried to boot from it, simply nothing happened. Cursor blinked a couple times, and jumped to the GRUB of my pre-existing GNU/Linux installation. What am I missing here? Is this not doable? I tried this with Xubuntu 12.04 and ArchLinux, by the way. I have also tried UNetBootIn instead of dd. Nothing happened differently.

  Read the article

• Booting From VIA VT6421A Based PCI SATA Card

  - by Priyan R

  I bought a VIA VT6421A based SATA card for an 845 chipset based motherboard. The card is working i can access sata hdd from windows/linux. The problem is i can't directly boot from the sata card. My motherboard is award bios 6 based. I tried first boot as SCSI, its not worked. There is no Raid Bios screen appeared from the card. On searching i found , Add VT6421A bios to system bios as pci addon bios. I did it using cbrom6 , successfully added VT6421A bios to the existing bios. But now on booting instead of raid bios system bios showed Warning : something like cannot load add on rom for vendor id xxxx device id xxx . Whats wrong ? As the card is VT6421A based and i added VT6421A bios got from VIA website.

  Read the article

• Adobe Acrobat Reader don't zoom out the page enough in "one page" mode

  - by mbaitoff

  I'm using Adobe Acrobat Reader version 9.4 under Debian Lenny. I'm experiencing a problem: when I push the "Show one page at a time" button, I expect the page to zoom such that pressing PgUp/PgDn would turn to the next/previous page. However, the zoom seems to be not enough - very thin bottom portion of the page doesn't fit inside the reader window, and pressing PgUp/PgDn gives the jitter of the same page, and I have to push twice to get to the next page. It is even worse in continuous page mode - a roll of pages begin to be non-synced with window boundaries, ending up with page break right in the middle of the view after several turns of the pages. This behaviour doesn't occur on windows version - I have a page properly zoomed in single/continuous modes, so that turning the pages is performed as page-at-once, as intended. How to make the Acrobat Reader fit the page to window properly? Thats how it looks before pressing PgDn (notice the bottom edge of the "paper" hidden beneath the bottom window edge): Thats how it looks after pressing PgDn (notice the "paper" bottom edge emerged from beneath the window edge, while the "paper" upper edge hides behind the upper window edge, showing that the document window size is not enough to contain the whole page):

  Read the article

• Second video card (PCI) under Windows 7

  - by dbkk101

  I'm trying to get an old PCI video card (Diamond Stealth 2500) along with a normal PCI-E video card. In BIOS, there is a setting to switch between PEG/PCI or PCI/PEG on startup (PEG is PCI-E Graphics). When I use PCI/PEG only the old PCI card works, when I use the other one, only the new PEG card works. In PEG/PCI mode, Windows 7 recognizes the card and shows it in Device Manager as Standard VGA adapter, but it shows a warning for the device ("This device cannot start. (Code 10)").

  Read the article

• Bootable SD card still has small memory, even after formating

  - by Inazuma

  I have an SD card which I used to run my RaspberryPi. I wanted to update the copy of raspbian on it, so I formated the card using the software from www.sdcard.com. I followed all the instructions correctly, however the size of my SD card didn't go back to it's default. It is a 4gb SD card, which after it's spell in the RaspberryPi had shrunken to 52mb, which I understand is normal. After formatting, the size rose to 3.69gb. This means that there is not enough space to install a new OS, so how can I make my SD card 4gb again? Any help would be much appreciated!

  Read the article

• video card for only watching videos

  - by Nothing 2 Lose

  I recently quit gaming so I took out my (GeForce GTX 550 Ti) video card and switched back to the (cheap) integrated card because I don't want the dedicated card using up power & making unnecessary heat/noise. But now I get lag when I watch high-res movies, or when I open several videos at the same time, but I don't want to go back to my (big/expensive) video card because that seems like overkill. What is the smallest/cheapest card which will only be good enough for watching videos without lagging ? (but not for gaming) PS. My CPU is: AMD Phenom 9850 Quad-Core Processor

  Read the article

• Enlarge partition on SD card

  - by chenwj

  I have followed Cloning an SD card onto a larger SD card to clone a 2G SD card to a 32G SD card, and the file system is ext4. However, on the 32G SD card I only can see 2G space available. Is there a way to maximize it out? Here is the output of fdisk: Command (m for help): p Disk /dev/sdb: 32.0 GB, 32026656768 bytes 64 heads, 32 sectors/track, 30543 cylinders, total 62552064 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e015a Device Boot Start End Blocks Id System /dev/sdb1 * 32 147455 73712 c W95 FAT32 (LBA) /dev/sdb2 147456 3994623 1923584 83 Linux I want to make /dev/sdb2 use up the remaining space. I try resize2fs /dev/sdb after dd, but get message below: $ sudo resize2fs /dev/sdb resize2fs 1.42 (29-Nov-2011) resize2fs: Bad magic number in super-block while trying to open /dev/sdb Couldn't find valid filesystem superblock. Any idea on what I am doing wrong? Thanks.

  Read the article

• Multiplayer card game using PHP/Ajax and mysql

  - by Alireza Seifi

  I am designing a map game, using PHP and MYSQL. I don't know how to make the players who sign-in to the website to see other players who are also connected to the site and be able to chat with one another. I want to design the game in such a way that 2 players can play with each other and be able to send messages during the game while others groups are playing at the same time. I have designed the map game successfully, but the problem is making the player 1 who log-in to site to see the player 2 who will also log-in and both can get connected to play each other. http://i.stack.imgur.com/YyCPG.png I will appreciate your responses.

  Read the article

• Access files on Samsung Galaxy S3 external sd card using ubuntu 12.04

  - by nense

  I have a Samsung Galaxy s3 running the stock Samsung ROM and I'm trying to transfer files - videos, photos, music and downloads, from my handset to my system via USB running Ubuntu 12.04. I have followed to links suggested How to connect Samsung Galaxy S3 via USB? But it all goes over my head. Can anyone help me with a simple GUI program or a link so I can simply copy and paste selected files from my phone onto my system?

  Read the article

• Running PCIE card with the on board video card as well in Windows 7

  - by Russ Johnson

  I have an emachines Windows7 PC. I am trying to run the on board video card along with the dual DVI card I installed in the PCIE slot. In CMOS it shows the on board card as disabled and it will not let me enable it? Its greyed out so I cant even highlight it to change anything. I have done this before in XP on a few different machines so I know its possible, Any idea?

  Read the article

• How to rescue from an SD (SDHC) card that I can't reformat (possible hardware failure)

  - by sbwoodside

  I have a transcend 16GB SDHC card and a lot of photos on it that I'd like to recover. When I plug it into the SD card reader, it takes a while for the Mac to even recognize that there's a disk present, and it shows up as 1.07GB with geometry 520/64/63 (according to fdisk). First I tried file recovery: PhotoRec: no files are found (the images are in CR2 format and I'm using testdisk-6.14-WIP which claims to recognize that format under TIF) dd / ddrescue: they create a 1.07GB image, same problem as above TestDisk: doesn't find any partitions to recover I found a source saying that the correct geometry for this type of SD Card is Heads 255, Sectors/Track 63, Cylinders 1953, so I tried manually setting that geometry in PhotoRec/TestDisk. No improvement. Next I tried formatting the disk with fdisk. After writing and quitting, I ran fdisk again and it reported that the new format hadn't been saved on the disk. I also tried resetting the format/partitions with TestDisk and that failed also. The fdisk log is below. I don't really care about the card, I've already ordered a new SanDisk card. But I'd like to get the data off. Maybe, is there any way to force dd or some other tool to create an image of the disk based on the original geometry and not on what the card "thinks" its geometry is? Or am I missing something?

  Read the article

• Can't access server sound card when vnc'd into ubuntu server

  - by Corey Kennedy

  I've set up my ubunutu 10 server with xfce, nxserver, and now tightvncserver so that I can control it remotely from my Windows 7 laptop. NX is working fine for remote access, but when I run (for example) exaile, no sound will be sent through the server's sound card. I installed tightvncserver and connected, but ran into the same problem. Exaile opens, sound isn't muted, I can see that sound cards are installed (via cat /proc/asound/cards), but I can't seem to get the remote sessions to access the server's sound card. Also, just to confirm that the sound card was working I hooked up a montior/keyboard to the server and opened a local xfce session. That worked fine. While I had the local session running, I was also able to open a remote session with NXClient and start exaile - which then successfully piped sound to the local card. After disconnecting the monitor/keyboard and moving the box back to its normal spot, though, I was not able to play sound via either an NX or VNC session. Does anyone have any suggestions? Surely it's possible to configure my remote sessions to pipe sound to the server's sound card, right? Or at least get xfce up and running without a monitor or keyboard but with access to the sound card so I can VNC into it? Thanks!

  Read the article

• Computer won't start after installing new video card

  - by Vercas

  So, 1 year and 340 days ago I bought a desktop computer. Since then, it has served me well. But lately, I wanted an upgrade, so I bought a new video card. I documented myself about the compatibility, and it is okay. So I opened the case, cleaned up that... dust elemental living inside of it. Unscrewed the plastic thingie on the outside to unscrew the old video card. Because of the stupid arrangement of the ports, I had to unscrew the motherboard to unplug it. So I unscrewed it, removed the old card, put in the new one, moved the motherboard back, screwed it back in, screwed the video card on the holder... thingie, and screwed the plastic thingie back in. Everything went smoothly, nothing had to be forced in/out. I connected the external power supply, closed the computer case, put the tower back in it's place and all the cables back in. When I pressed the power button, the LED turned... some color I can't distinguish. It stayed that way for a second, and then it went off. I tried a bunch of things, including permuting the external power supply arrangement (1 connection, 2 connections and no connections), with no success. And here are some of the specifications: Motherboard manufacturer: Asrock Processor: AMD Athlon II X2 3.0 GHz RAM: 2 x 2GB (had only 1 initially, bought the second plate a bit later) OLD video card: AMD Radeon HD 5450 NEW video card: Gigabyte nVidia GeForce GTX 650 GPU, 1GB GDDR5 128bit PCI-E, Dual-link DVI-Dx2 / HDMI / D-Sub Power supply: 450W + all the requirements I managed to find on the internet are met (+12V 18A or something) More specific information is stored... On that computer. If required, I may open the case again and read the stickers to find more specific information. I can also provide photos if necessary. Any ideas? Suggestions? Something? :|

  Read the article

• Adobe Reader XI and Acrobat X will not open

  - by irule311

  Just a few days ago, Adobe Reader XI and Acrobat X stopped opening. When I try to open a pdf or either one of these programs the cursor would show a busy icon for a few seconds and stop. Each time I open it a process will show up in task manager, but no window will open. I have tried these things, but none will work Restarting the computer Running as Administrator Repairing the installation Reinstalling Following this guide: http://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html When I ran acrofix it returned exit code 3 Also I have seen this, but I am not running tune up: Adobe Reader XI will not launch I am running windows 7 ultimate x64. Can someone help? Thanks!

  Read the article

• Adobe Reader unusably slow on Mac OS X 10.6.6

  - by vwegert

  We've got two Macs that are both running 10.6.6. On my MBP, Adobe (Acrobat) Reader started behaving weird a few weeks ago. It became very sluggish, started missing mouse clicks or mouse button releases, scrolling was next to impossible. Most of the time it does not handle Page Up / Page Down events at all. Zooming works erratically if at all. It's basically unusable. On the other Mac (an iMac), there are no such problems. I've tried to remove and reinstall Adobe Reader as well as upgrading to the latest version, but unfortunately without success. This is the only software that is behaving strangely on this Mac, everything else is working fine. What else could I try?

  Read the article

• Disable Save Changes dialoge in Adobe Reader X

  - by Ross Aiken

  Yes, I've read and done the steps listed here with no results: Disable 'Save changes' dialog in Adobe Reader Basically what happens is with certain pdf documents, whenever I try to close them, it prompts me to save changes. This baffles me, as per their FAQ, Reader can't save anything, and I didn't make changes to the document in the first place. The one cause I could think of would be that the documents may not have been created with Adobe software, and as such may not write the pdfs in a way that makes Adobe happy.

  Read the article

• Google reader Keyboard shortcuts not working in Firefox 3.6

  - by Jj

  I just upgraded to Ubuntu 10.04 which comes with Firefox 3.6.3. Now Google reader some keyboard shortcuts stopped working, The j/k keys are ok, but 'v', 'Shift+x' and others don't work and start the Search As You type functionality I've always used. The Javascript console only shows this warning: Warning: The 'charCode' property of a keyup event should not be used. The value is meaningless. Source File: http://www.google.com/reader/view/?tab=my#overview-page Line: 0 This did not happen with Firefox 3.5.x even though I've always had the Search as you type option enabled.

  Read the article

• Adobe Reader - Content Preparation progress

  - by kubal5003

  Hello, I was wondering recently if is it just me or anyone else noticed it: why Adobe Reader after opening every single document displays "Content preparation" window with progress bar and it lasts for ages.. ? On linux pdf readers work hell lot better (faster), on windows other readers also work faster. Some years back in the past Adobe Reader also used to be quick. What has happened? PDF files aren't bigger/more complex compared to 3-4 years ago. Computers are at least dual core and with much more ram and displaying pdf files is getting slower and slower..

  Read the article

• Acrobat Reader, and indeed all Adobe products are freezing and crashing on print

  - by 5tratus

  Everything was working fine, right up till I had to do some driver work to get my scanner to work - now I can't seem to print from any Adobe product. I click print and the program freezes, it stops responding, and in the case of Acrobat Reader, it crashes. In the case of In-design CS4, I have to stop the process in task manager, in the case of Fireworks CS3 - I think it just crashes. Printing a PDF hangs and crashes inside of Firefox and IE browsers too. My printer works and I can print from MS Word, Excel and directly by right clicking on a non-Adobe file and choosing print. But when I try it in an Adobe product. I'm running Windows 7 64-bit, my version of Adobe Reader is: 10.1.11, Windows is updated, and I don't have any unusual extensions.

  Read the article

• Adobe Reader 9.0 memory leak while loading-unloading PDF files every one second indefinitely

  - by Total Starnger

  I have c++ written MFC based application that has PDF object viewer as a part of the implementation. A whole thing works just fine with Adobe Reader 8.0. Once I switched to Adobe Reader 9.0 as a default PDF reader, I keep experiencing small memory leak that forces my application to crash within a half an hour of continuous loading-unloading different PDF files. Any ideas what might cause this memory leak and is there any cure besides replacing Adobe Reader 9.0 with anything else? (Works fine with Foxit PDF reader as well, by the way..)

  Read the article

• Opera 10.5 RAM usage and Google Reader?

  - by David

  Hi all, Today I upgraded to Opera 10.5 from Google Chrome and I have two really important questions about it. 1) Is it normal for it to use SO MUCH RAM!!!!? Closing tabs doesn't help, but opening new ones add on to the usage. I can have just 4 tabs open and it goes up to the 300MB mark and I only have 1.5GB in my laptop, 596MB of it used by the graphics card so this really unacceptable. Is there a way to fix it? 2) Why does Google Reader feel so slow and unresponsive on it? It lags so bad when I just try scrolling through the page. I know Opera is known for being really smooth while scrolling through pages. There's also a white bar at the bottom of the page that I can get rid of. It blocks the "Next" and "Previous" buttons. The test between articles is also sort of intersecting each other and that just looks completely unattractive and that's something i'm not used with any web browser. I realize there's a built-in RSS reader, but it doesn't sync across multiple computers and is very late at updating. Here are my specs: Windows 7 Ultimate (x86), Intel Pentium M 1.86 GHz, 1.5GB RAM, ATI Mobility Radeon X600 (64MB dedicated, 596MB shared)

  Read the article

• Fried graphics card, how to proceed ?

  - by user19496

  Motherboard: Biostar TPower I45 I fried my graphics card (white smoke), by removing the cable marked PCI-E from the card, and then booting. Removed the graphics card, and now the machine is booting, and I can ping it. However I have no possibility to see what is actually happening, because I can't attach a monitor. Can I workaround the lack of monitor in some way, just to see if the motherboard is fine, attach a cable and telnet in or any other way ? Or, do I have to buy and install a new graphics card to be sure ?

  Read the article

• Cannot format SD memory card

  - by cool

  Hello everyone I have a SD memory card which is of local manufacturer it allows to read & copy from it but not write as it is now write-protected so i want to format that card but could not. To format this card I have tried 1) DD command 2) mkfs -f vfat command 3) creating registry entry under storage device policy in window with write value 0 4) disk part command in window to clear attributes in which it show all attributes are clear ie no write protection 5) I format card in windows through control panel - administrative tools- computer management - disk management, then it show as formatted but when I tried to create new partition it give CYCLIC REDUNDANCY CHECK error 6) I downloaded a format utility from transcend site and formatted first it shows write protected again doing format it formats and tells to remove and reinsert after reinsertion it shows the previous data as it is

  Read the article

• New graphics card (GTX 760) slowing down entire PC

  - by Cayetano Gonçalves

  My new graphics card is making my PC totally unusable. It boots up really slowly, and when the windows screen comes on, the mouse lags really far behind. Nothing opens at a normal speed. However, when I put in my 5-year old graphics card, it all works fine. I'm currently using a Foxconn Renaissance LGA 1366 Intel X58 ATX Motherboard, Intel Motherboard Intel Core i7-950 Bloomfield 3.06GHz LGA 1366 130W Processor, and a EVGA SuperNOVA 850G2 80PLUS Gold Certified ATX12V/EPS12V 850W Power Supply . I know it can't be the power supply, because I just bought it today to try to fix the problem. I've also installed the newest version of BIOS available for my motherboard. I've also seen extreme variations in CPU while the new graphics card is in, and when the old graphics card is installed, it is much calmer. Any thoughts?

  Read the article

• Old PCI Video Card and PCI-Express ATI Radeon HD 4200 Pro Living Together

  - by Adam Driscoll

  I have two video cards installed in a Dell Optiplex 745. The PCI card is from 2001 and I was hoping to be able to install it, allowing me to have 3 monitors. The Radeon is already running two itself. The problem is that when I boot the box with default BIOS settings the PCI card displays video to the single display but not the other two. In device manager I can see that both video cards are visible with drivers loaded correctly but underneath monitors I only have a single Generic PnP monitor from the VGA connection to the PCI card. If I switch the BIOS setting to force PCI-E I get the Radeon to display to the two other monitors. When I check device manager with this configuration I see that the PCI card displays an error saying the driver could not be started. Any ideas?

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >